summaryrefslogtreecommitdiff
path: root/tmk_core
diff options
context:
space:
mode:
authorJoel Challis <git@zvecr.com>2022-08-08 03:13:16 +0100
committerGitHub <noreply@github.com>2022-08-08 03:13:16 +0100
commit764c542befcdbaabf2be7ae50804671dd6a4d841 (patch)
treefb1ab1670976456d7ccfb6cc5686acd055fca531 /tmk_core
parent972f9a612c0293b16ff5189e694aacd1d2a51916 (diff)
downloadqmk_firmware-764c542befcdbaabf2be7ae50804671dd6a4d841.tar.gz
qmk_firmware-764c542befcdbaabf2be7ae50804671dd6a4d841.zip
Remove tmk_core 'serial' code (#17866)
Diffstat (limited to 'tmk_core')
-rw-r--r--tmk_core/protocol/serial.h46
-rw-r--r--tmk_core/protocol/serial_soft.c234
-rw-r--r--tmk_core/protocol/serial_uart.c133
3 files changed, 0 insertions, 413 deletions
diff --git a/tmk_core/protocol/serial.h b/tmk_core/protocol/serial.h
deleted file mode 100644
index 0204b84a92..0000000000
--- a/tmk_core/protocol/serial.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
-Copyright 2012 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#pragma once
-
-#define SERIAL_UART_DATA UDR1
-
-/* host role */
-void serial_init(void);
-uint8_t serial_recv(void);
-int16_t serial_recv2(void);
-void serial_send(uint8_t data);
diff --git a/tmk_core/protocol/serial_soft.c b/tmk_core/protocol/serial_soft.c
deleted file mode 100644
index 8624ef733c..0000000000
--- a/tmk_core/protocol/serial_soft.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
-Copyright 2012 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "serial.h"
-
-/*
- * Stupid Inefficient Busy-wait Software Serial
- * which is still useful for negative logic signal like Sun protocol
- * if it is not supported by hardware UART.
- *
- * TODO: delay is not accurate enough. Instruction cycle should be counted and inline assemby is needed.
- */
-
-#define WAIT_US (1000000L / SERIAL_SOFT_BAUD)
-
-#ifdef SERIAL_SOFT_LOGIC_NEGATIVE
-# define SERIAL_SOFT_RXD_IN() !(SERIAL_SOFT_RXD_READ())
-# define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_LO()
-# define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_HI()
-#else
-# define SERIAL_SOFT_RXD_IN() !!(SERIAL_SOFT_RXD_READ())
-# define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_HI()
-# define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_LO()
-#endif
-
-#ifdef SERIAL_SOFT_PARITY_EVEN
-# define SERIAL_SOFT_PARITY_VAL 0
-#elif defined(SERIAL_SOFT_PARITY_ODD)
-# define SERIAL_SOFT_PARITY_VAL 1
-#endif
-
-/* debug for signal timing, see debug pin with oscilloscope */
-#ifdef SERIAL_SOFT_DEBUG
-# define SERIAL_SOFT_DEBUG_INIT() (DDRD |= 1 << 7)
-# define SERIAL_SOFT_DEBUG_TGL() (PORTD ^= 1 << 7)
-#else
-# define SERIAL_SOFT_DEBUG_INIT()
-# define SERIAL_SOFT_DEBUG_TGL()
-#endif
-
-void serial_init(void) {
- SERIAL_SOFT_DEBUG_INIT();
-
- SERIAL_SOFT_RXD_INIT();
- SERIAL_SOFT_TXD_INIT();
-}
-
-/* RX ring buffer */
-#define RBUF_SIZE 8
-static uint8_t rbuf[RBUF_SIZE];
-static uint8_t rbuf_head = 0;
-static uint8_t rbuf_tail = 0;
-
-uint8_t serial_recv(void) {
- uint8_t data = 0;
- if (rbuf_head == rbuf_tail) {
- return 0;
- }
-
- data = rbuf[rbuf_tail];
- rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
- return data;
-}
-
-int16_t serial_recv2(void) {
- uint8_t data = 0;
- if (rbuf_head == rbuf_tail) {
- return -1;
- }
-
- data = rbuf[rbuf_tail];
- rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
- return data;
-}
-
-void serial_send(uint8_t data) {
- /* signal state: IDLE: ON, START: OFF, STOP: ON, DATA0: OFF, DATA1: ON */
-
-#ifdef SERIAL_SOFT_BIT_ORDER_MSB
-# ifdef SERIAL_SOFT_DATA_7BIT
- uint8_t mask = 0x40;
-# else
- uint8_t mask = 0x80;
-# endif
-#else
- uint8_t mask = 0x01;
-#endif
-
- uint8_t parity = 0;
-
- /* start bit */
- SERIAL_SOFT_TXD_OFF();
- _delay_us(WAIT_US);
-
-#ifdef SERIAL_SOFT_DATA_7BIT
- while (mask & 0x7F) {
-#else
- while (mask & 0xFF) {
-#endif
- if (data & mask) {
- SERIAL_SOFT_TXD_ON();
- parity ^= 1;
- } else {
- SERIAL_SOFT_TXD_OFF();
- }
- _delay_us(WAIT_US);
-
-#ifdef SERIAL_SOFT_BIT_ORDER_MSB
- mask >>= 1;
-#else
- mask <<= 1;
-#endif
- }
-
-#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
- /* to center of parity bit */
- if (parity != SERIAL_SOFT_PARITY_VAL) {
- SERIAL_SOFT_TXD_ON();
- } else {
- SERIAL_SOFT_TXD_OFF();
- }
- _delay_us(WAIT_US);
-#endif
-
- /* stop bit */
- SERIAL_SOFT_TXD_ON();
- _delay_us(WAIT_US);
-}
-
-/* detect edge of start bit */
-ISR(SERIAL_SOFT_RXD_VECT) {
- SERIAL_SOFT_DEBUG_TGL();
- SERIAL_SOFT_RXD_INT_ENTER();
-
- uint8_t data = 0;
-
-#ifdef SERIAL_SOFT_BIT_ORDER_MSB
-# ifdef SERIAL_SOFT_DATA_7BIT
- uint8_t mask = 0x40;
-# else
- uint8_t mask = 0x80;
-# endif
-#else
- uint8_t mask = 0x01;
-#endif
-
- uint8_t parity = 0;
-
- /* to center of start bit */
- _delay_us(WAIT_US / 2);
- SERIAL_SOFT_DEBUG_TGL();
- do {
- /* to center of next bit */
- _delay_us(WAIT_US);
-
- SERIAL_SOFT_DEBUG_TGL();
- if (SERIAL_SOFT_RXD_IN()) {
- data |= mask;
- parity ^= 1;
- }
-#ifdef SERIAL_SOFT_BIT_ORDER_MSB
- mask >>= 1;
-#else
- mask <<= 1;
-#endif
-#ifdef SERIAL_SOFT_DATA_7BIT
- } while (mask & 0x7F);
-#else
- } while (mask & 0xFF);
-#endif
-
-#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
- /* to center of parity bit */
- _delay_us(WAIT_US);
- if (SERIAL_SOFT_RXD_IN()) {
- parity ^= 1;
- }
- SERIAL_SOFT_DEBUG_TGL();
-#endif
-
- /* to center of stop bit */
- _delay_us(WAIT_US);
-
- uint8_t next = (rbuf_head + 1) % RBUF_SIZE;
-#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
- if ((parity == SERIAL_SOFT_PARITY_VAL) && next != rbuf_tail) {
-#else
- if (next != rbuf_tail) {
-#endif
- rbuf[rbuf_head] = data;
- rbuf_head = next;
- }
-
- SERIAL_SOFT_RXD_INT_EXIT();
- SERIAL_SOFT_DEBUG_TGL();
-}
diff --git a/tmk_core/protocol/serial_uart.c b/tmk_core/protocol/serial_uart.c
deleted file mode 100644
index d5b5657095..0000000000
--- a/tmk_core/protocol/serial_uart.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
-Copyright 2013 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include "serial.h"
-
-#ifndef SERIAL_UART_BAUD
-# define SERIAL_UART_BAUD 9600
-#endif
-
-#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
-#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
-#define SERIAL_UART_RXD_VECT USART1_RX_vect
-
-#ifndef SERIAL_UART_INIT_CUSTOM
-# define SERIAL_UART_INIT_CUSTOM \
- /* enable TX */ \
- UCSR1B = _BV(TXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
-#endif
-
-#if defined(SERIAL_UART_RTS_LO) && defined(SERIAL_UART_RTS_HI)
-// Buffer state
-// Empty: RBUF_SPACE == RBUF_SIZE(head==tail)
-// Last 1 space: RBUF_SPACE == 2
-// Full: RBUF_SPACE == 1(last cell of rbuf be never used.)
-# define RBUF_SPACE() (rbuf_head < rbuf_tail ? (rbuf_tail - rbuf_head) : (RBUF_SIZE - rbuf_head + rbuf_tail))
-// allow to send
-# define rbuf_check_rts_lo() \
- do { \
- if (RBUF_SPACE() > 2) SERIAL_UART_RTS_LO(); \
- } while (0)
-// prohibit to send
-# define rbuf_check_rts_hi() \
- do { \
- if (RBUF_SPACE() <= 2) SERIAL_UART_RTS_HI(); \
- } while (0)
-#else
-# define rbuf_check_rts_lo()
-# define rbuf_check_rts_hi()
-#endif
-
-void serial_init(void) {
- do {
- // Set baud rate
- UBRR1L = SERIAL_UART_UBRR;
- UBRR1L = SERIAL_UART_UBRR >> 8;
- SERIAL_UART_INIT_CUSTOM;
- } while (0);
-}
-
-// RX ring buffer
-#define RBUF_SIZE 256
-static uint8_t rbuf[RBUF_SIZE];
-static uint8_t rbuf_head = 0;
-static uint8_t rbuf_tail = 0;
-
-uint8_t serial_recv(void) {
- uint8_t data = 0;
- if (rbuf_head == rbuf_tail) {
- return 0;
- }
-
- data = rbuf[rbuf_tail];
- rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
- rbuf_check_rts_lo();
- return data;
-}
-
-int16_t serial_recv2(void) {
- uint8_t data = 0;
- if (rbuf_head == rbuf_tail) {
- return -1;
- }
-
- data = rbuf[rbuf_tail];
- rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
- rbuf_check_rts_lo();
- return data;
-}
-
-void serial_send(uint8_t data) {
- while (!SERIAL_UART_TXD_READY)
- ;
- SERIAL_UART_DATA = data;
-}
-
-// USART RX complete interrupt
-ISR(SERIAL_UART_RXD_VECT) {
- uint8_t next = (rbuf_head + 1) % RBUF_SIZE;
- if (next != rbuf_tail) {
- rbuf[rbuf_head] = SERIAL_UART_DATA;
- rbuf_head = next;
- }
- rbuf_check_rts_hi();
-}