diff options
| -rw-r--r-- | layouts/community/ortho_4x12/mindsound/config.h | 33 | ||||
| -rw-r--r-- | layouts/community/ortho_4x12/mindsound/flicker.h | 5 | ||||
| -rw-r--r-- | layouts/community/ortho_4x12/mindsound/keymap.c | 230 | ||||
| -rw-r--r-- | layouts/community/ortho_4x12/mindsound/readme.md | 19 | ||||
| -rw-r--r-- | layouts/community/ortho_4x12/mindsound/rules.mk | 26 |
5 files changed, 313 insertions, 0 deletions
diff --git a/layouts/community/ortho_4x12/mindsound/config.h b/layouts/community/ortho_4x12/mindsound/config.h new file mode 100644 index 0000000000..76e7da2049 --- /dev/null +++ b/layouts/community/ortho_4x12/mindsound/config.h @@ -0,0 +1,33 @@ +#pragma once + +#define ADVENTURE_TIME \ + H__NOTE(_F5), \ + Q__NOTE(_F5), \ + H__NOTE(_F5), \ + H__NOTE(_G5), \ + H__NOTE(_E5), \ + H__NOTE(_E5), \ + H__NOTE(_D5), \ + H__NOTE(_C5), \ + HD_NOTE(_C6), + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(ADVENTURE_TIME) + #define AUDIO_CLICKY + #define AUDIO_CLICKY_ON + #define AUDIO_CLICKY_FREQ_MAX 2500.0f + #define AUDIO_CLICKY_FREQ_RANDOMNESS 0.2f + #define AUDIO_CLICKY_FREQ_DEFAULT 110.0f +#endif + +// for some reason the LSvi rev1 disables action tapping... +#ifdef NO_ACTION_TAPPING + #undef NO_ACTION_TAPPING +#endif + +#undef BACKLIGHT_LEVELS +#define BACKLIGHT_LEVELS 15 + +// let's split configuration: +#define USE_I2C +#define EE_HANDS diff --git a/layouts/community/ortho_4x12/mindsound/flicker.h b/layouts/community/ortho_4x12/mindsound/flicker.h new file mode 100644 index 0000000000..a982f19aed --- /dev/null +++ b/layouts/community/ortho_4x12/mindsound/flicker.h @@ -0,0 +1,5 @@ +#pragma once + +void flicker_toggle(void); +void flicker_keydown(void); +void flicker_keyup(void); diff --git a/layouts/community/ortho_4x12/mindsound/keymap.c b/layouts/community/ortho_4x12/mindsound/keymap.c new file mode 100644 index 0000000000..2c9ceaf690 --- /dev/null +++ b/layouts/community/ortho_4x12/mindsound/keymap.c @@ -0,0 +1,230 @@ +#include QMK_KEYBOARD_H + +#ifdef BACKLIGHT_ENABLE +#include "flicker.h" +#endif + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +enum planck_layers { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST +}; + +// keycodes custom to this keymap: +enum planck_keycodes { + QWERTY = SAFE_RANGE, + BL_FLICKER +}; + +// flicker state: +#ifdef BACKLIGHT_ENABLE +bool flicker_enable = true; +bool flicker_isdown = false; +const uint8_t flicker_min_levels = 2; +const uint8_t flicker_max_levels = 7; +uint8_t flicker_restore_level = 0; +#endif + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +// mod tap definitions: +#define CTRL_ESC MT(MOD_LCTL, KC_ESC) +#define HYPR_SPC MT(MOD_HYPR, KC_SPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | Del | GUI | Alt |Lower |HyprSp|Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT_ortho_4x12( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + CTRL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + KC_MPLY, KC_DEL, KC_LGUI, KC_LALT, LOWER, HYPR_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_ortho_4x12( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_ortho_4x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap| | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | |Clicky|ClkDn |ClkUp |ClkRst| + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_ortho_4x12( + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, \ + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, BL_TOGG, BL_DEC, BL_INC, BL_FLICKER, \ + _______, _______, _______, _______, _______, _______, _______, _______, CLICKY_TOGGLE, CLICKY_DOWN, CLICKY_UP, CLICKY_RESET \ +), + +}; // end keymaps + +// if backlighting is enabled, configure it on boot +#ifdef BACKLIGHT_ENABLE +void matrix_init_user(void) { + // set to max + backlight_level(BACKLIGHT_LEVELS); + flicker_restore_level = get_backlight_level(); + + // if breathing happens to be compiled in, turn it off +#ifdef BACKLIGHT_BREATHING + breathing_disable(); +#endif +} +#endif + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + // handle the _ADJUST layer and custom keycodes: + switch (keycode) { + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; +#ifdef BACKLIGHT_ENABLE + case BL_FLICKER: + if (record->event.pressed) { + flicker_toggle(); + } + return false; + break; +#endif + } // end switch case over custom keycodes + +#ifdef BACKLIGHT_ENABLE + if (flicker_enable) { + if (record->event.pressed) { + flicker_keydown(); + } else { + flicker_keyup(); + } + } +#endif + + return true; +} + +void encoder_update(bool clockwise) { + if (clockwise) { + register_code(KC_VOLU); + unregister_code(KC_VOLU); + } else { + register_code(KC_VOLD); + unregister_code(KC_VOLD); + } +} + +// flicker implementation: +#ifdef BACKLIGHT_ENABLE +void flicker_toggle(void) { + flicker_enable = !flicker_enable; +} + +void flicker_keydown(void) { + // guard condition: only set the level to restore if the flicker is NOT already down + if (!flicker_isdown) { + flicker_restore_level = get_backlight_level(); + flicker_isdown = true; + } + + // calculate a random flicker level between min and max + uint8_t flicker_level = (rand() % (flicker_max_levels - flicker_min_levels)) + flicker_min_levels; + uint8_t level_to_set = flicker_level <= flicker_restore_level ? flicker_restore_level - flicker_level : 0; + backlight_level(level_to_set); +} + +void flicker_keyup(void) { + backlight_level(flicker_restore_level); + flicker_isdown = false; +} +#endif diff --git a/layouts/community/ortho_4x12/mindsound/readme.md b/layouts/community/ortho_4x12/mindsound/readme.md new file mode 100644 index 0000000000..e9db480494 --- /dev/null +++ b/layouts/community/ortho_4x12/mindsound/readme.md @@ -0,0 +1,19 @@ +# Josh's 4x12 layout + +Notable features: + +* Esc is Ctrl on hold +* Left space is `MOD_HYPER` on hold +* Backspace is still backspace on `RAISE` and `LOWER` +* Faux clicky controls are on the arrow keys on the `ADJUST` layer, and the backlight controls are directly above that +* Backlight breathing is disabled; backlight flickering is implemented instead +* Colemak and other layouts are thoroughly disabled +* Rotary encoder controls media volume on base layer + +This layout has been tested on: + +* Let's Split (rev 2) +* Let's Split Vitamins Included (rev 1) +* Planck (rev 4) + +It builds for the Planck rev 6 but has not been tested yet. diff --git a/layouts/community/ortho_4x12/mindsound/rules.mk b/layouts/community/ortho_4x12/mindsound/rules.mk new file mode 100644 index 0000000000..c01a1ddb58 --- /dev/null +++ b/layouts/community/ortho_4x12/mindsound/rules.mk @@ -0,0 +1,26 @@ +# none of my keyboards need LTO and it screws up I2C on my LSVI: +EXTRAFLAGS:=$(filter-out -flto,$(EXTRAFLAGS)) + +# turning off backlighting and audio for the split keebs +ifneq (,$(findstring lets_split,$(KEYBOARD))) + BACKLIGHT_ENABLE = no + BACKLIGHT_BREATHING = no + AUDIO_ENABLE = no +endif +ifneq (,$(findstring vitamins_included,$(KEYBOARD))) + BACKLIGHT_ENABLE = no + BACKLIGHT_BREATHING = no + AUDIO_ENABLE = no +endif + +# both my plancks use audio but only the rev4 has backlighting +ifneq (,$(findstring planck,$(KEYBOARD))) + ifneq (,$(findstring rev4,$(KEYBOARD))) + BACKLIGHT_ENABLE = yes + BACKLIGHT_BREATHING = no + else + BACKLIGHT_ENABLE = no + BACKLIGHT_BREATHING = no + endif + AUDIO_ENABLE = yes +endif |