summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--keyboards/mixi/config.h47
-rw-r--r--keyboards/mixi/info.json22
-rw-r--r--keyboards/mixi/keymaps/default/keymap.c116
-rw-r--r--keyboards/mixi/keymaps/default/readme.md10
-rw-r--r--keyboards/mixi/keymaps/via/keymap.c116
-rw-r--r--keyboards/mixi/keymaps/via/rules.mk2
-rw-r--r--keyboards/mixi/mixi.c13
-rw-r--r--keyboards/mixi/mixi.h13
-rw-r--r--keyboards/mixi/readme.md15
-rw-r--r--keyboards/mixi/rules.mk27
10 files changed, 381 insertions, 0 deletions
diff --git a/keyboards/mixi/config.h b/keyboards/mixi/config.h
new file mode 100644
index 0000000000..cb89dd2cb0
--- /dev/null
+++ b/keyboards/mixi/config.h
@@ -0,0 +1,47 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4752
+#define PRODUCT_ID 0x4D49
+#define DEVICE_VER 0x0001
+#define MANUFACTURER gregorio
+#define PRODUCT Mixi
+#define DESCRIPTION Mixi macropad by gregorio
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/* Keyboard Matrix Assignments */
+#define DIRECT_PINS { \
+ { D1, D4, F4 }, \
+ { D0, B4, F5 }, \
+ { C6, F7, B6 } \
+}
+
+#define ENCODERS_PAD_A { F5 }
+#define ENCODERS_PAD_B { F4 }
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN B5
+#ifdef RGB_DI_PIN
+#define RGBLED_NUM 5
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_LAYERS
+#define RGBLIGHT_LAYER_BLINK
+#endif
diff --git a/keyboards/mixi/info.json b/keyboards/mixi/info.json
new file mode 100644
index 0000000000..123e23dc6b
--- /dev/null
+++ b/keyboards/mixi/info.json
@@ -0,0 +1,22 @@
+{
+ "keyboard_name": "Mixi",
+ "url": "https://tokopedia.com/sell-stuffs",
+ "maintainer": "ohchiko",
+ "width": 3,
+ "height": 3,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"x":0, "y":0},
+ {"x":1, "y":0},
+ {"x":2, "y":0},
+ {"x":0, "y":1},
+ {"x":1, "y":1},
+ {"x":2, "y":1},
+ {"x":0, "y":2},
+ {"x":1, "y":2},
+ {"x":2, "y":2}
+ ]
+ }
+ }
+}
diff --git a/keyboards/mixi/keymaps/default/keymap.c b/keyboards/mixi/keymaps/default/keymap.c
new file mode 100644
index 0000000000..806a7a924c
--- /dev/null
+++ b/keyboards/mixi/keymaps/default/keymap.c
@@ -0,0 +1,116 @@
+#include QMK_KEYBOARD_H
+
+// please change this value to the desired layer definitions
+#define LAYERNUM 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /*
+ * | Knob: Layer +/- |
+ * .---------------------------------------.
+ * | Mute | Play/Pause | Hold: Layer 2 |
+ * |----------|------------|---------------|
+ * | Previous | Up | Next |
+ * |----------|------------|---------------|
+ * | Left | Down | Right |
+ * '---------------------------------------'
+ */
+ [0] =
+ LAYOUT(
+ KC_MUTE, KC_MPLY, MO(2),
+ KC_MNXT, KC_UP , KC_MPRV ,
+ KC_LEFT, KC_DOWN , KC_RGHT
+ ),
+
+ /*
+ * .-----------------------.
+ * | NUM 7 | NUM 8 | NUM 9 |
+ * |-------|-------|-------|
+ * | NUM 4 | NUM 5 | NUM 6 |
+ * |-------|-------|-------|
+ * | NUM 1 | NUM 2 | NUM 3 |
+ * '-----------------------'
+ */
+ [1] =
+ LAYOUT(
+ KC_P7, KC_P8, KC_P8,
+ KC_P4, KC_P5, KC_P6,
+ KC_P1, KC_P2, KC_P3
+ ),
+
+ /*
+ * | Knob: Volume +/- |
+ * .--------------------------------------.
+ * | N/A | N/A | Hold: Layer 2 |
+ * |--------------|-------|---------------|
+ * | RESET EEPROM | RESET | DEBUG MODE |
+ * |--------------|-------|---------------|
+ * | N/A | N/A | N/A |
+ * '--------------------------------------'
+ */
+ [2] =
+ LAYOUT(
+ KC_NO , KC_NO, KC_TRNS,
+ EEP_RST, RESET, DEBUG ,
+ KC_NO , KC_NO, KC_NO
+ )
+
+};
+
+const rgblight_segment_t PROGMEM _base_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+ {0, RGBLED_NUM, HSV_WHITE}
+ );
+const rgblight_segment_t PROGMEM _middle_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+ {0, RGBLED_NUM, HSV_GREEN}
+ );
+const rgblight_segment_t PROGMEM _top_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+ {0, RGBLED_NUM, HSV_RED}
+ );
+
+const rgblight_segment_t* const PROGMEM _rgb_layers[] =
+RGBLIGHT_LAYERS_LIST(
+ _base_layer,
+ _middle_layer,
+ _top_layer
+ );
+
+void keyboard_post_init_user(void) {
+ rgblight_layers = _rgb_layers;
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+
+ switch (get_highest_layer(state)) {
+ case 0:
+ rgblight_blink_layer(0, 500);
+ break;
+ case 1:
+ rgblight_blink_layer(1, 500);
+ break;
+ case 2:
+ rgblight_blink_layer(2, 500);
+ break;
+ }
+ return state;
+}
+
+uint8_t selected_layer = 0;
+void encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) {
+ if (layer_state_is(2)) {
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ } else {
+ if (clockwise && selected_layer < (LAYERNUM-2)) { /* Prevent switch to layer 2 using encoder */
+ selected_layer++;
+ layer_move(selected_layer);
+ } else if (!clockwise && selected_layer > 0) {
+ selected_layer--;
+ layer_move(selected_layer);
+ }
+ }
+ }
+}
diff --git a/keyboards/mixi/keymaps/default/readme.md b/keyboards/mixi/keymaps/default/readme.md
new file mode 100644
index 0000000000..863fa6f5d6
--- /dev/null
+++ b/keyboards/mixi/keymaps/default/readme.md
@@ -0,0 +1,10 @@
+![Mixi Layout Image](https://i.imgur.com/UIXj9O6.png)
+
+# Default Mixi Layout
+
+This is the default layout that comes flashed on every Mixi macropad. Layer 1
+and Layer 2 are accessible by rotating the encoder. Layer 3 is not accessible
+by the encoder, instead is accessible by holding the [0,2] key on Layer 1. While
+Layer 3 is active, rotating the encoder will results in increasing/decreasing
+media volume. This layout is expected the encoder is on the left side or [0,0]
+key.
diff --git a/keyboards/mixi/keymaps/via/keymap.c b/keyboards/mixi/keymaps/via/keymap.c
new file mode 100644
index 0000000000..806a7a924c
--- /dev/null
+++ b/keyboards/mixi/keymaps/via/keymap.c
@@ -0,0 +1,116 @@
+#include QMK_KEYBOARD_H
+
+// please change this value to the desired layer definitions
+#define LAYERNUM 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /*
+ * | Knob: Layer +/- |
+ * .---------------------------------------.
+ * | Mute | Play/Pause | Hold: Layer 2 |
+ * |----------|------------|---------------|
+ * | Previous | Up | Next |
+ * |----------|------------|---------------|
+ * | Left | Down | Right |
+ * '---------------------------------------'
+ */
+ [0] =
+ LAYOUT(
+ KC_MUTE, KC_MPLY, MO(2),
+ KC_MNXT, KC_UP , KC_MPRV ,
+ KC_LEFT, KC_DOWN , KC_RGHT
+ ),
+
+ /*
+ * .-----------------------.
+ * | NUM 7 | NUM 8 | NUM 9 |
+ * |-------|-------|-------|
+ * | NUM 4 | NUM 5 | NUM 6 |
+ * |-------|-------|-------|
+ * | NUM 1 | NUM 2 | NUM 3 |
+ * '-----------------------'
+ */
+ [1] =
+ LAYOUT(
+ KC_P7, KC_P8, KC_P8,
+ KC_P4, KC_P5, KC_P6,
+ KC_P1, KC_P2, KC_P3
+ ),
+
+ /*
+ * | Knob: Volume +/- |
+ * .--------------------------------------.
+ * | N/A | N/A | Hold: Layer 2 |
+ * |--------------|-------|---------------|
+ * | RESET EEPROM | RESET | DEBUG MODE |
+ * |--------------|-------|---------------|
+ * | N/A | N/A | N/A |
+ * '--------------------------------------'
+ */
+ [2] =
+ LAYOUT(
+ KC_NO , KC_NO, KC_TRNS,
+ EEP_RST, RESET, DEBUG ,
+ KC_NO , KC_NO, KC_NO
+ )
+
+};
+
+const rgblight_segment_t PROGMEM _base_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+ {0, RGBLED_NUM, HSV_WHITE}
+ );
+const rgblight_segment_t PROGMEM _middle_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+ {0, RGBLED_NUM, HSV_GREEN}
+ );
+const rgblight_segment_t PROGMEM _top_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+ {0, RGBLED_NUM, HSV_RED}
+ );
+
+const rgblight_segment_t* const PROGMEM _rgb_layers[] =
+RGBLIGHT_LAYERS_LIST(
+ _base_layer,
+ _middle_layer,
+ _top_layer
+ );
+
+void keyboard_post_init_user(void) {
+ rgblight_layers = _rgb_layers;
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+
+ switch (get_highest_layer(state)) {
+ case 0:
+ rgblight_blink_layer(0, 500);
+ break;
+ case 1:
+ rgblight_blink_layer(1, 500);
+ break;
+ case 2:
+ rgblight_blink_layer(2, 500);
+ break;
+ }
+ return state;
+}
+
+uint8_t selected_layer = 0;
+void encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) {
+ if (layer_state_is(2)) {
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ } else {
+ if (clockwise && selected_layer < (LAYERNUM-2)) { /* Prevent switch to layer 2 using encoder */
+ selected_layer++;
+ layer_move(selected_layer);
+ } else if (!clockwise && selected_layer > 0) {
+ selected_layer--;
+ layer_move(selected_layer);
+ }
+ }
+ }
+}
diff --git a/keyboards/mixi/keymaps/via/rules.mk b/keyboards/mixi/keymaps/via/rules.mk
new file mode 100644
index 0000000000..36b7ba9cbc
--- /dev/null
+++ b/keyboards/mixi/keymaps/via/rules.mk
@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
diff --git a/keyboards/mixi/mixi.c b/keyboards/mixi/mixi.c
new file mode 100644
index 0000000000..533cf3b881
--- /dev/null
+++ b/keyboards/mixi/mixi.c
@@ -0,0 +1,13 @@
+#include "mixi.h"
+
+void eeconfig_init_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+ rgblight_enable(); // Enable RGB underglow by default
+#ifdef RGBLIGHT_ANIMATIONS
+ rgblight_mode(RGBLIGHT_MODE_TWINKLE + 5); // Set to RGB_TWINKLE animation by default
+#endif
+#endif
+
+ eeconfig_update_kb(0);
+ eeconfig_init_user();
+}
diff --git a/keyboards/mixi/mixi.h b/keyboards/mixi/mixi.h
new file mode 100644
index 0000000000..8b2bc7090b
--- /dev/null
+++ b/keyboards/mixi/mixi.h
@@ -0,0 +1,13 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ K00, K01, K02, \
+ K10, K11, K12, \
+ K20, K21, K22 \
+ ) { \
+ { K00, K01, K02 }, \
+ { K10, K11, K12 }, \
+ { K20, K21, K22 } \
+}
diff --git a/keyboards/mixi/readme.md b/keyboards/mixi/readme.md
new file mode 100644
index 0000000000..4c911db570
--- /dev/null
+++ b/keyboards/mixi/readme.md
@@ -0,0 +1,15 @@
+# Mixi
+
+![Mixi](https://i.imgur.com/GPO6Khu.jpg)
+
+A mini 3x3 macropad with rotary encoders support and RGB underglow and also tray mount support. Currently the PCB and kits can only be purchased in Indonesia.
+
+* Keyboard Maintainer: [ohchiko](https://github.com/ohchiko)
+* Hardware Supported: Mixi PCB, Arduino Pro Micro
+* Hardware Availability: [Tokopedia/Sell Stuffs](https://tokopedia.com/sell-stuffs) (Indonesia only).
+
+Make example for this keyboard (after setting up your build environment):
+
+ make mixi:default
+
+ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/mixi/rules.mk b/keyboards/mixi/rules.mk
new file mode 100644
index 0000000000..99b1f1cbc5
--- /dev/null
+++ b/keyboards/mixi/rules.mk
@@ -0,0 +1,27 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = caterina
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+ENCODER_ENABLE = yes
+AUDIO_ENABLE = no
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-10 20:12:44 +0000