diff options
29 files changed, 1049 insertions, 0 deletions
diff --git a/keyboards/alfredslab/swift65/solder/config.h b/keyboards/alfredslab/swift65/solder/config.h new file mode 100644 index 0000000000..509aae6a89 --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/config.h @@ -0,0 +1,68 @@ + +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xBBEB +#define PRODUCT_ID 0xD4C3 +#define DEVICE_VER 0x0001 +#define MANUFACTURER AlfredsLab +#define PRODUCT Swift65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B1, B2, B3, D4, D6 } +#define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0, C7, C6, B6, B5, B4, D7, D5, D3, D1, D0 } + +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN D2 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 14 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 100 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/alfredslab/swift65/solder/info.json b/keyboards/alfredslab/swift65/solder/info.json new file mode 100644 index 0000000000..a04de1cc14 --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/info.json @@ -0,0 +1,81 @@ +{ + "keyboard_name": "Swift65", + "url": "https://swiftcables.net/", + "maintainer": "Spooknik", + "width": 16.25, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"K00 (B1,F7)", "x":0, "y":0}, + {"label":"K01 (B1,F6)", "x":1, "y":0}, + {"label":"K02 (B1,F5)", "x":2, "y":0}, + {"label":"K03 (B1,F4)", "x":3, "y":0}, + {"label":"K04 (B1,F1)", "x":4, "y":0}, + {"label":"K05 (B1,F0)", "x":5, "y":0}, + {"label":"K06 (B1,C7)", "x":6, "y":0}, + {"label":"K07 (B1,C6)", "x":7, "y":0}, + {"label":"K08 (B1,B6)", "x":8, "y":0}, + {"label":"K09 (B1,B5)", "x":9, "y":0}, + {"label":"K0A (B1,B4)", "x":10, "y":0}, + {"label":"K0B (B1,D7)", "x":11, "y":0}, + {"label":"K0C (B1,D5)", "x":12, "y":0}, + {"label":"K0D (B1,D3)", "x":13, "y":0}, + {"label":"K0F (B1,D0)", "x":14, "y":0}, + {"label":"K0E (B1,D1)", "x":15.25, "y":0}, + {"label":"K10 (B2,F7)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (B2,F6)", "x":1.5, "y":1}, + {"label":"K12 (B2,F5)", "x":2.5, "y":1}, + {"label":"K13 (B2,F4)", "x":3.5, "y":1}, + {"label":"K14 (B2,F1)", "x":4.5, "y":1}, + {"label":"K15 (B2,F0)", "x":5.5, "y":1}, + {"label":"K16 (B2,C7)", "x":6.5, "y":1}, + {"label":"K17 (B2,C6)", "x":7.5, "y":1}, + {"label":"K18 (B2,B6)", "x":8.5, "y":1}, + {"label":"K19 (B2,B5)", "x":9.5, "y":1}, + {"label":"K1A (B2,B4)", "x":10.5, "y":1}, + {"label":"K1B (B2,D7)", "x":11.5, "y":1}, + {"label":"K1C (B2,D5)", "x":12.5, "y":1}, + {"label":"K1D (B2,D3)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E (B2,D1)", "x":15.25, "y":1}, + {"label":"K20 (B3,F7)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B3,F6)", "x":1.75, "y":2}, + {"label":"K22 (B3,F5)", "x":2.75, "y":2}, + {"label":"K23 (B3,F4)", "x":3.75, "y":2}, + {"label":"K24 (B3,F1)", "x":4.75, "y":2}, + {"label":"K25 (B3,F0)", "x":5.75, "y":2}, + {"label":"K26 (B3,C7)", "x":6.75, "y":2}, + {"label":"K27 (B3,C6)", "x":7.75, "y":2}, + {"label":"K28 (B3,B6)", "x":8.75, "y":2}, + {"label":"K29 (B3,B5)", "x":9.75, "y":2}, + {"label":"K2A (B3,B4)", "x":10.75, "y":2}, + {"label":"K2B (B3,D7)", "x":11.75, "y":2}, + {"label":"K2C (B3,D5)", "x":12.75, "y":2, "w":2.25}, + {"label":"K2E (B3,D1)", "x":15.25, "y":2}, + {"label":"K30 (D4,F7)", "x":0, "y":3, "w":2.25}, + {"label":"K32 (D4,F5)", "x":2.25, "y":3}, + {"label":"K33 (D4,F4)", "x":3.25, "y":3}, + {"label":"K34 (D4,F1)", "x":4.25, "y":3}, + {"label":"K35 (D4,F0)", "x":5.25, "y":3}, + {"label":"K36 (D4,C7)", "x":6.25, "y":3}, + {"label":"K37 (D4,C6)", "x":7.25, "y":3}, + {"label":"K38 (D4,B6)", "x":8.25, "y":3}, + {"label":"K39 (D4,B5)", "x":9.25, "y":3}, + {"label":"K3A (D4,B4)", "x":10.25, "y":3}, + {"label":"K3B (D4,D7)", "x":11.25, "y":3}, + {"label":"K3C (D4,D5)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3D (D4,D3)", "x":14, "y":3}, + {"label":"K40 (D6,F7)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (D6,F6)", "x":1.25, "y":4, "w":1.25}, + {"label":"K43 (D6,F4)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (D6,C7)", "x":3.75, "y":4, "w":6.25}, + {"label":"K4A (D6,B4)", "x":10, "y":4, "w":1.25}, + {"label":"K4B (D6,D7)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4C (D6,D5)", "x":13, "y":4}, + {"label":"K4D (D6,D3)", "x":14, "y":4}, + {"label":"K4E (D6,D1)", "x":15, "y":4} + ] + } + } + ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" +} diff --git a/keyboards/alfredslab/swift65/solder/keymaps/default/keymap.c b/keyboards/alfredslab/swift65/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..274809bb11 --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/keymaps/default/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 Steven Phillips (spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + +};
\ No newline at end of file diff --git a/keyboards/alfredslab/swift65/solder/keymaps/default/readme.md b/keyboards/alfredslab/swift65/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..74de146080 --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# Default Swift65 Solder Layout + + diff --git a/keyboards/alfredslab/swift65/solder/keymaps/via/keymap.c b/keyboards/alfredslab/swift65/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..9936becce6 --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 Steven Phillips (spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/alfredslab/swift65/solder/keymaps/via/readme.md b/keyboards/alfredslab/swift65/solder/keymaps/via/readme.md new file mode 100644 index 0000000000..74de146080 --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/keymaps/via/readme.md @@ -0,0 +1,3 @@ +# Default Swift65 Solder Layout + + diff --git a/keyboards/alfredslab/swift65/solder/keymaps/via/rules.mk b/keyboards/alfredslab/swift65/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/alfredslab/swift65/solder/readme.md b/keyboards/alfredslab/swift65/solder/readme.md new file mode 100644 index 0000000000..b477438199 --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/readme.md @@ -0,0 +1,20 @@ +# Swift65 + +A 65% Keyboard from Swiftcables + +* Keyboard Maintainer: [Steven Phillips (spoonik)](https://github.com/keyboardcollective) +* Hardware Supported: Swift65 Solder +* Hardware Availability: Soom from Swiftcables + +To enter bootloader for flashing firmware, press layer change key (MO(1)) and Right Shift simultaneously. + +Make example for this keyboard (after setting up your build environment): + + make alfredslab/swift65/solder:default + +Flashing example for this keyboard: + + make alfredslab/swift65/solder:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + diff --git a/keyboards/alfredslab/swift65/solder/rules.mk b/keyboards/alfredslab/swift65/solder/rules.mk new file mode 100644 index 0000000000..2c2853b57f --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/alfredslab/swift65/solder/solder.c b/keyboards/alfredslab/swift65/solder/solder.c new file mode 100644 index 0000000000..4dd021ba7c --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/solder.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Steven Phillips (spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "solder.h" diff --git a/keyboards/alfredslab/swift65/solder/solder.h b/keyboards/alfredslab/swift65/solder/solder.h new file mode 100644 index 0000000000..7629379f59 --- /dev/null +++ b/keyboards/alfredslab/swift65/solder/solder.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Steven Phillips (spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0F, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E, KC_NO }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, KC_NO }, \ + { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E, KC_NO }, \ +} diff --git a/keyboards/ggkeyboards/genesis/hotswap/config.h b/keyboards/ggkeyboards/genesis/hotswap/config.h new file mode 100644 index 0000000000..d435612f17 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/hotswap/config.h @@ -0,0 +1,49 @@ +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xBB00 +#define PRODUCT_ID 0xD4D3 +#define DEVICE_VER 0x0001 +#define MANUFACTURER GG Keyboards +#define PRODUCT Genesis + +/* key matrix size */ +#define MATRIX_ROWS 7 +#define MATRIX_COLS 18 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { C5, C4, C3, C2, C1, C0 } +#define MATRIX_COL_PINS { F0, F1, F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, A6, A7, C6, C7 } + +#define DIODE_DIRECTION COL2ROW + + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/
\ No newline at end of file diff --git a/keyboards/ggkeyboards/genesis/hotswap/hotswap.c b/keyboards/ggkeyboards/genesis/hotswap/hotswap.c new file mode 100644 index 0000000000..b3b7c6508c --- /dev/null +++ b/keyboards/ggkeyboards/genesis/hotswap/hotswap.c @@ -0,0 +1,22 @@ + +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "hotswap.h" + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/ + diff --git a/keyboards/ggkeyboards/genesis/hotswap/hotswap.h b/keyboards/ggkeyboards/genesis/hotswap/hotswap.h new file mode 100644 index 0000000000..a5ff78cca7 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/hotswap/hotswap.h @@ -0,0 +1,39 @@ +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0F, K0G, K0H, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, K2G, K2H, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3F, K3G, K3H, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, \ + K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5G, \ + K60, K61, K63, K66, K6A, K6B, K6C, K6D, K6F, K6G, K6H \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, KC_NO, K0F, K0G, K0H }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F, K2G, K2H }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, K3F, K3G, K3H }, \ + { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, KC_NO, KC_NO, KC_NO, K5G, KC_NO }, \ + { K60, K61, KC_NO, K63, KC_NO, KC_NO, K66, KC_NO, KC_NO, KC_NO, K6A, K6B, K6C, K6D, KC_NO, K6F, K6G, K6H }, \ +} + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/
\ No newline at end of file diff --git a/keyboards/ggkeyboards/genesis/hotswap/info.json b/keyboards/ggkeyboards/genesis/hotswap/info.json new file mode 100644 index 0000000000..dfb68ce0b5 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/hotswap/info.json @@ -0,0 +1,101 @@ +{ + "keyboard_name": "Genesis", + "url": "", + "maintainer": "Spooknik", + "width": 18.25, + "height": 6.5, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"K00 (C5,F0)", "x":0, "y":0}, + {"label":"K01 (C5,F1)", "x":2, "y":0}, + {"label":"K02 (C5,F2)", "x":3, "y":0}, + {"label":"K03 (C5,F3)", "x":4, "y":0}, + {"label":"K04 (C5,F4)", "x":5, "y":0}, + {"label":"K05 (C5,F5)", "x":6.5, "y":0}, + {"label":"K06 (C5,F6)", "x":7.5, "y":0}, + {"label":"K07 (C5,F7)", "x":8.5, "y":0}, + {"label":"K08 (C5,A0)", "x":9.5, "y":0}, + {"label":"K09 (C5,A1)", "x":11, "y":0}, + {"label":"K0A (C5,A2)", "x":12, "y":0}, + {"label":"K0B (C5,A3)", "x":13, "y":0}, + {"label":"K0C (C5,A4)", "x":14, "y":0}, + {"label":"K0F (C5,A7)", "x":15.25, "y":0}, + {"label":"K0G (C5,C6)", "x":16.25, "y":0}, + {"label":"K0H (C5,C7)", "x":17.25, "y":0}, + {"label":"K20 (C4,F0)", "x":0, "y":1.5}, + {"label":"K21 (C4,F1)", "x":1, "y":1.5}, + {"label":"K22 (C4,F2)", "x":2, "y":1.5}, + {"label":"K23 (C4,F3)", "x":3, "y":1.5}, + {"label":"K24 (C4,F4)", "x":4, "y":1.5}, + {"label":"K25 (C4,F5)", "x":5, "y":1.5}, + {"label":"K26 (C4,F6)", "x":6, "y":1.5}, + {"label":"K27 (C4,F7)", "x":7, "y":1.5}, + {"label":"K28 (C4,A0)", "x":8, "y":1.5}, + {"label":"K29 (C4,A1)", "x":9, "y":1.5}, + {"label":"K2A (C4,A2)", "x":10, "y":1.5}, + {"label":"K2B (C4,A3)", "x":11, "y":1.5}, + {"label":"K2C (C4,A4)", "x":12, "y":1.5}, + {"label":"K2D (C4,A5)", "x":13, "y":1.5, "w":2}, + {"label":"K2F (C4,A7)", "x":15.25, "y":1.5}, + {"label":"K2G (C4,C6)", "x":16.25, "y":1.5}, + {"label":"K2H (C4,C7)", "x":17.25, "y":1.5}, + {"label":"K30 (C3,F0)", "x":0, "y":2.5, "w":1.5}, + {"label":"K31 (C3,F1)", "x":1.5, "y":2.5}, + {"label":"K32 (C3,F2)", "x":2.5, "y":2.5}, + {"label":"K33 (C3,F3)", "x":3.5, "y":2.5}, + {"label":"K34 (C3,F4)", "x":4.5, "y":2.5}, + {"label":"K35 (C3,F5)", "x":5.5, "y":2.5}, + {"label":"K36 (C3,F6)", "x":6.5, "y":2.5}, + {"label":"K37 (C3,F7)", "x":7.5, "y":2.5}, + {"label":"K38 (C3,A0)", "x":8.5, "y":2.5}, + {"label":"K39 (C3,A1)", "x":9.5, "y":2.5}, + {"label":"K3A (C3,A2)", "x":10.5, "y":2.5}, + {"label":"K3B (C3,A3)", "x":11.5, "y":2.5}, + {"label":"K3C (C3,A4)", "x":12.5, "y":2.5}, + {"label":"K3D (C3,A5)", "x":13.5, "y":2.5, "w":1.5}, + {"label":"K3F (C3,A7)", "x":15.25, "y":2.5}, + {"label":"K3G (C3,C6)", "x":16.25, "y":2.5}, + {"label":"K3H (C3,C7)", "x":17.25, "y":2.5}, + {"label":"K40 (C2,F0)", "x":0, "y":3.5, "w":1.75}, + {"label":"K42 (C2,F2)", "x":1.75, "y":3.5}, + {"label":"K43 (C2,F3)", "x":2.75, "y":3.5}, + {"label":"K44 (C2,F4)", "x":3.75, "y":3.5}, + {"label":"K45 (C2,F5)", "x":4.75, "y":3.5}, + {"label":"K46 (C2,F6)", "x":5.75, "y":3.5}, + {"label":"K47 (C2,F7)", "x":6.75, "y":3.5}, + {"label":"K48 (C2,A0)", "x":7.75, "y":3.5}, + {"label":"K49 (C2,A1)", "x":8.75, "y":3.5}, + {"label":"K4A (C2,A2)", "x":9.75, "y":3.5}, + {"label":"K4B (C2,A3)", "x":10.75, "y":3.5}, + {"label":"K4C (C2,A4)", "x":11.75, "y":3.5}, + {"label":"K4D (C2,A5)", "x":12.75, "y":3.5, "w":2.25}, + {"label":"K51 (C1,F1)", "x":0, "y":4.5, "w":2.25}, + {"label":"K52 (C1,F2)", "x":2.25, "y":4.5}, + {"label":"K53 (C1,F3)", "x":3.25, "y":4.5}, + {"label":"K54 (C1,F4)", "x":4.25, "y":4.5}, + {"label":"K55 (C1,F5)", "x":5.25, "y":4.5}, + {"label":"K56 (C1,F6)", "x":6.25, "y":4.5}, + {"label":"K57 (C1,F7)", "x":7.25, "y":4.5}, + {"label":"K58 (C1,A0)", "x":8.25, "y":4.5}, + {"label":"K59 (C1,A1)", "x":9.25, "y":4.5}, + {"label":"K5A (C1,A2)", "x":10.25, "y":4.5}, + {"label":"K5B (C1,A3)", "x":11.25, "y":4.5}, + {"label":"K5C (C1,A4)", "x":12.25, "y":4.5, "w":2.75}, + {"label":"K5G (C1,C6)", "x":16.25, "y":4.5}, + {"label":"K60 (C0,F0)", "x":0, "y":5.5, "w":1.25}, + {"label":"K61 (C0,F1)", "x":1.25, "y":5.5, "w":1.25}, + {"label":"K63 (C0,F3)", "x":2.5, "y":5.5, "w":1.25}, + {"label":"K66 (C0,F6)", "x":3.75, "y":5.5, "w":6.25}, + {"label":"K6A (C0,A2)", "x":10, "y":5.5, "w":1.25}, + {"label":"K6B (C0,A3)", "x":11.25, "y":5.5, "w":1.25}, + {"label":"K6C (C0,A4)", "x":12.5, "y":5.5, "w":1.25}, + {"label":"K6D (C0,A5)", "x":13.75, "y":5.5, "w":1.25}, + {"label":"K6F (C0,A7)", "x":15.25, "y":5.5}, + {"label":"K6G (C0,C6)", "x":16.25, "y":5.5}, + {"label":"K6H (C0,C7)", "x":17.25, "y":5.5} + ] + } + } + ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" +} diff --git a/keyboards/ggkeyboards/genesis/hotswap/keymaps/default/keymap.c b/keyboards/ggkeyboards/genesis/hotswap/keymaps/default/keymap.c new file mode 100644 index 0000000000..ab009ae58a --- /dev/null +++ b/keyboards/ggkeyboards/genesis/hotswap/keymaps/default/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, MO(1), KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/ggkeyboards/genesis/hotswap/keymaps/via/keymap.c b/keyboards/ggkeyboards/genesis/hotswap/keymaps/via/keymap.c new file mode 100644 index 0000000000..dd680a8391 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/hotswap/keymaps/via/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, MO(1), KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +};
\ No newline at end of file diff --git a/keyboards/ggkeyboards/genesis/hotswap/keymaps/via/rules.mk b/keyboards/ggkeyboards/genesis/hotswap/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/hotswap/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/ggkeyboards/genesis/hotswap/readme.md b/keyboards/ggkeyboards/genesis/hotswap/readme.md new file mode 100644 index 0000000000..c93aab1af4 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/hotswap/readme.md @@ -0,0 +1,15 @@ +# GG Keyboards Hotswap PCB + +A Top mount TKL keyboard from GG Keyboards. + +* Keyboard Maintainer: [Stevem Phillips (spooknik)](https://github.com/spooknik) +* Hardware Supported: Hotswap PCB Rev 1 +* Hardware Availability: Coming Soon! + +To enter bootloader for flashing firmware, press layer change key (MO(1)) and "R" Key simultaneously. + +Make example for this keyboard (after setting up your build environment): + + make ggkeyboards/genesis/hotswap:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ggkeyboards/genesis/hotswap/rules.mk b/keyboards/ggkeyboards/genesis/hotswap/rules.mk new file mode 100644 index 0000000000..0de06a3443 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/hotswap/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = at90usb1286 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +# generated by KBFirmware JSON to QMK Parser +# https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/ggkeyboards/genesis/solder/config.h b/keyboards/ggkeyboards/genesis/solder/config.h new file mode 100644 index 0000000000..76586262ab --- /dev/null +++ b/keyboards/ggkeyboards/genesis/solder/config.h @@ -0,0 +1,49 @@ +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xBB00 +#define PRODUCT_ID 0xD4D2 +#define DEVICE_VER 0x0001 +#define MANUFACTURER GG Keyboards +#define PRODUCT Genesis + +/* key matrix size */ +#define MATRIX_ROWS 7 +#define MATRIX_COLS 18 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { C5, C4, C3, C2, C1, C0 } +#define MATRIX_COL_PINS { F0, F1, F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, A6, A7, C6, C7 } + +#define DIODE_DIRECTION COL2ROW + + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/
\ No newline at end of file diff --git a/keyboards/ggkeyboards/genesis/solder/info.json b/keyboards/ggkeyboards/genesis/solder/info.json new file mode 100644 index 0000000000..918f4c2e1b --- /dev/null +++ b/keyboards/ggkeyboards/genesis/solder/info.json @@ -0,0 +1,103 @@ +{ + "keyboard_name": "Genesis", + "url": "", + "maintainer": "Spooknik", + "width": 17, + "height": 6, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"K00 (C5,F0)", "x":0, "y":0}, + {"label":"K01 (C5,F1)", "x":2, "y":0}, + {"label":"K02 (C5,F2)", "x":3, "y":0}, + {"label":"K03 (C5,F3)", "x":4, "y":0}, + {"label":"K04 (C5,F4)", "x":5, "y":0}, + {"label":"K05 (C5,F5)", "x":6.5, "y":0}, + {"label":"K06 (C5,F6)", "x":7.5, "y":0}, + {"label":"K07 (C5,F7)", "x":8.5, "y":0}, + {"label":"K08 (C5,A0)", "x":9.5, "y":0}, + {"label":"K09 (C5,A1)", "x":11, "y":0}, + {"label":"K0A (C5,A2)", "x":12, "y":0}, + {"label":"K0B (C5,A3)", "x":13, "y":0}, + {"label":"K0C (C5,A4)", "x":14, "y":0}, + {"label":"K0E (C5,A6)", "x":15, "y":0}, + {"label":"K0F (C5,A7)", "x":16, "y":0}, + {"label":"K0G (C5,C6)", "x":17, "y":0}, + {"label":"K10 (C4,F0)", "x":0, "y":1}, + {"label":"K11 (C4,F1)", "x":1, "y":1}, + {"label":"K12 (C4,F2)", "x":2, "y":1}, + {"label":"K13 (C4,F3)", "x":3, "y":1}, + {"label":"K14 (C4,F4)", "x":4, "y":1}, + {"label":"K15 (C4,F5)", "x":5, "y":1}, + {"label":"K16 (C4,F6)", "x":6, "y":1}, + {"label":"K17 (C4,F7)", "x":7, "y":1}, + {"label":"K18 (C4,A0)", "x":8, "y":1}, + {"label":"K19 (C4,A1)", "x":9, "y":1}, + {"label":"K1A (C4,A2)", "x":10, "y":1}, + {"label":"K1B (C4,A3)", "x":11, "y":1}, + {"label":"K1C (C4,A4)", "x":12, "y":1}, + {"label":"K1D (C4,A5)", "x":13, "y":1}, + {"label":"K0D (C5,A5)", "x":14, "y":1}, + {"label":"K1E (C4,A6)", "x":15, "y":1}, + {"label":"K1F (C4,A7)", "x":16, "y":1}, + {"label":"K1G (C4,C6)", "x":17, "y":1}, + {"label":"K20 (C3,F0)", "x":0, "y":2, "w":1.5}, + {"label":"K21 (C3,F1)", "x":1.5, "y":2}, + {"label":"K22 (C3,F2)", "x":2.5, "y":2}, + {"label":"K23 (C3,F3)", "x":3.5, "y":2}, + {"label":"K24 (C3,F4)", "x":4.5, "y":2}, + {"label":"K25 (C3,F5)", "x":5.5, "y":2}, + {"label":"K26 (C3,F6)", "x":6.5, "y":2}, + {"label":"K27 (C3,F7)", "x":7.5, "y":2}, + {"label":"K28 (C3,A0)", "x":8.5, "y":2}, + {"label":"K29 (C3,A1)", "x":9.5, "y":2}, + {"label":"K2A (C3,A2)", "x":10.5, "y":2}, + {"label":"K2B (C3,A3)", "x":11.5, "y":2}, + {"label":"K2C (C3,A4)", "x":12.5, "y":2}, + {"label":"K2D (C3,A5)", "x":13.5, "y":2, "w":1.5}, + {"label":"K2E (C3,A6)", "x":15, "y":2}, + {"label":"K2F (C3,A7)", "x":16, "y":2}, + {"label":"K2G (C3,C6)", "x":17, "y":2}, + {"label":"K30 (C2,F0)", "x":0, "y":3, "w":1.75}, + {"label":"K31 (C2,F1)", "x":1.75, "y":3}, + {"label":"K32 (C2,F2)", "x":2.75, "y":3}, + {"label":"K33 (C2,F3)", "x":3.75, "y":3}, + {"label":"K34 (C2,F4)", "x":4.75, "y":3}, + {"label":"K35 (C2,F5)", "x":5.75, "y":3}, + {"label":"K36 (C2,F6)", "x":6.75, "y":3}, + {"label":"K37 (C2,F7)", "x":7.75, "y":3}, + {"label":"K38 (C2,A0)", "x":8.75, "y":3}, + {"label":"K39 (C2,A1)", "x":9.75, "y":3}, + {"label":"K3A (C2,A2)", "x":10.75, "y":3}, + {"label":"K3B (C2,A3)", "x":11.75, "y":3}, + {"label":"K3D (C2,A5)", "x":12.75, "y":3, "w":2.25}, + {"label":"K40 (C1,F0)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (C1,F1)", "x":1.25, "y":4}, + {"label":"K42 (C1,F2)", "x":2.25, "y":4}, + {"label":"K43 (C1,F3)", "x":3.25, "y":4}, + {"label":"K44 (C1,F4)", "x":4.25, "y":4}, + {"label":"K45 (C1,F5)", "x":5.25, "y":4}, + {"label":"K46 (C1,F6)", "x":6.25, "y":4}, + {"label":"K47 (C1,F7)", "x":7.25, "y":4}, + {"label":"K48 (C1,A0)", "x":8.25, "y":4}, + {"label":"K49 (C1,A1)", "x":9.25, "y":4}, + {"label":"K4A (C1,A2)", "x":10.25, "y":4}, + {"label":"K4B (C1,A3)", "x":11.25, "y":4}, + {"label":"K4C (C1,A4)", "x":12.25, "y":4, "w":2.75}, + {"label":"K4F (C1,A7)", "x":16, "y":4}, + {"label":"K50 (C0,F0)", "x":0, "y":5, "w":1.25}, + {"label":"K51 (C0,F1)", "x":1.25, "y":5, "w":1.25}, + {"label":"K52 (C0,F2)", "x":2.5, "y":5, "w":1.25}, + {"label":"K56 (C0,F6)", "x":3.75, "y":5, "w":6.25}, + {"label":"K5A (C0,A2)", "x":10, "y":5, "w":1.25}, + {"label":"K5B (C0,A3)", "x":11.25, "y":5, "w":1.25}, + {"label":"K5C (C0,A4)", "x":12.5, "y":5, "w":1.25}, + {"label":"K5D (C0,A5)", "x":13.75, "y":5, "w":1.25}, + {"label":"K5E (C0,A6)", "x":15, "y":5}, + {"label":"K5F (C0,A7)", "x":16, "y":5}, + {"label":"K5G (C0,C6)", "x":17, "y":5} + ] + } + } + ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" +}
\ No newline at end of file diff --git a/keyboards/ggkeyboards/genesis/solder/keymaps/default/keymap.c b/keyboards/ggkeyboards/genesis/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..98d778f1d1 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/solder/keymaps/default/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_SPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, MO(1), KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +};
\ No newline at end of file diff --git a/keyboards/ggkeyboards/genesis/solder/keymaps/via/keymap.c b/keyboards/ggkeyboards/genesis/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..1084a6e220 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/solder/keymaps/via/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_SPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, MO(1), KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +};
\ No newline at end of file diff --git a/keyboards/ggkeyboards/genesis/solder/keymaps/via/rules.mk b/keyboards/ggkeyboards/genesis/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/solder/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/ggkeyboards/genesis/solder/readme.md b/keyboards/ggkeyboards/genesis/solder/readme.md new file mode 100644 index 0000000000..edecaa656b --- /dev/null +++ b/keyboards/ggkeyboards/genesis/solder/readme.md @@ -0,0 +1,15 @@ +# GG Keyboards Solder PCB + +A Top mount TKL keyboard from GG Keyboards. + +* Keyboard Maintainer: [Stevem Phillips (spooknik)](https://github.com/spooknik) +* Hardware Supported: Solder PCB Rev 1 +* Hardware Availability: Coming Soon! + +To enter bootloader for flashing firmware, press layer change key (MO(1)) and "R" Key simultaneously. + +Make example for this keyboard (after setting up your build environment): + + make ggkeyboards/genesis/solder:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ggkeyboards/genesis/solder/rules.mk b/keyboards/ggkeyboards/genesis/solder/rules.mk new file mode 100644 index 0000000000..0de06a3443 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/solder/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = at90usb1286 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +# generated by KBFirmware JSON to QMK Parser +# https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/ggkeyboards/genesis/solder/solder.c b/keyboards/ggkeyboards/genesis/solder/solder.c new file mode 100644 index 0000000000..9e1bdeb0ff --- /dev/null +++ b/keyboards/ggkeyboards/genesis/solder/solder.c @@ -0,0 +1,22 @@ + +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "solder.h" + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/ + diff --git a/keyboards/ggkeyboards/genesis/solder/solder.h b/keyboards/ggkeyboards/genesis/solder/solder.h new file mode 100644 index 0000000000..a5a96adf83 --- /dev/null +++ b/keyboards/ggkeyboards/genesis/solder/solder.h @@ -0,0 +1,38 @@ +/* Copyright 2021 Steven Phillips (Spooknik) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K0D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4F, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F, K5G \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, KC_NO, KC_NO, K4F, KC_NO, KC_NO }, \ + { K50, K51, K52, KC_NO, KC_NO, KC_NO, K56, KC_NO, KC_NO, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F, K5G, KC_NO }, \ +} + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/
\ No newline at end of file |