diff options
| -rw-r--r-- | keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c | 126 | ||||
| -rw-r--r-- | keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.h | 1187 | ||||
| -rw-r--r-- | keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.mk | 5 | ||||
| -rw-r--r-- | keyboards/preonic/rev3/bootloader_defs.h | 7 | ||||
| -rw-r--r-- | keyboards/preonic/rev3/chconf.h | 520 | ||||
| -rw-r--r-- | keyboards/preonic/rev3/config.h | 4 | ||||
| -rw-r--r-- | keyboards/preonic/rev3/halconf.h | 388 | ||||
| -rw-r--r-- | keyboards/preonic/rev3/matrix.c | 22 | ||||
| -rw-r--r-- | keyboards/preonic/rev3/mcuconf.h | 257 | ||||
| -rw-r--r-- | keyboards/preonic/rev3/rules.mk | 48 |
10 files changed, 12 insertions, 2552 deletions
diff --git a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c b/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c deleted file mode 100644 index 4331155df4..0000000000 --- a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} -#endif -}; -#endif - -void enter_bootloader_mode_if_requested(void); - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.h b/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.h deleted file mode 100644 index ec26557f3a..0000000000 --- a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.h +++ /dev/null @@ -1,1187 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for Clueboard 60% Keyboard - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F303XC -#define BOARD_NAME "Planck PCB" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 8000000U -#endif - -// #define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F303xC - -/* - * IO pins assignments. - */ -#define GPIOA_PIN0 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_PIN0 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_PIN7 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_PIN14 14U -#define GPIOC_PIN15 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_I2C2_SDA 0U -#define GPIOF_I2C2_SCL 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -#define GPIOG_PIN0 0U -#define GPIOG_PIN1 1U -#define GPIOG_PIN2 2U -#define GPIOG_PIN3 3U -#define GPIOG_PIN4 4U -#define GPIOG_PIN5 5U -#define GPIOG_PIN6 6U -#define GPIOG_PIN7 7U -#define GPIOG_PIN8 8U -#define GPIOG_PIN9 9U -#define GPIOG_PIN10 10U -#define GPIOG_PIN11 11U -#define GPIOG_PIN12 12U -#define GPIOG_PIN13 13U -#define GPIOG_PIN14 14U -#define GPIOG_PIN15 15U - -#define GPIOH_PIN0 0U -#define GPIOH_PIN1 1U -#define GPIOH_PIN2 2U -#define GPIOH_PIN3 3U -#define GPIOH_PIN4 4U -#define GPIOH_PIN5 5U -#define GPIOH_PIN6 6U -#define GPIOH_PIN7 7U -#define GPIOH_PIN8 8U -#define GPIOH_PIN9 9U -#define GPIOH_PIN10 10U -#define GPIOH_PIN11 11U -#define GPIOH_PIN12 12U -#define GPIOH_PIN13 13U -#define GPIOH_PIN14 14U -#define GPIOH_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) - -#define LINE_PIN6 PAL_LINE(GPIOF, 0U) -#define LINE_PIN7 PAL_LINE(GPIOF, 1U) - -#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U) - - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - NC - * PA1 - NC - * PA2 - COL1 - * PA3 - COL2 - * PA4 - SPEAKER1 - * PA5 - SPEAKER2 - * PA6 - COL3 - * PA7 - COL8 - * PA8 - COL6 - * PA9 - COL7 - * PA10 - ROW5 - * PA11 - USB_DM (alternate 14). - * PA12 - USB_DP (alternate 14). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - ROW4 - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \ - PIN_MODE_ALTERNATE(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \ - PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \ - PIN_OSPEED_HIGH(GPIOA_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ - PIN_OSPEED_HIGH(GPIOA_USB_DM) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_USB_DM) | \ - PIN_ODR_HIGH(GPIOA_USB_DP) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | \ - PIN_AFIO_AF(GPIOA_PIN1, 1) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0) | \ - PIN_AFIO_AF(GPIOA_PIN5, 5) | \ - PIN_AFIO_AF(GPIOA_PIN6, 5) | \ - PIN_AFIO_AF(GPIOA_PIN7, 5)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0) | \ - PIN_AFIO_AF(GPIOA_USB_DM, 14) | \ - PIN_AFIO_AF(GPIOA_USB_DP, 14) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (alternate 0). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 LSM303DLHC_SCL (alternate 4). - * PB7 - PIN7 LSM303DLHC_SDA (alternate 4). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_INPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_ALTERNATE(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_ALTERNATE(GPIOB_PIN6) | \ - PIN_MODE_OUTPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_INPUT(GPIOB_PIN13) | \ - PIN_MODE_INPUT(GPIOB_PIN14) | \ - PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ - PIN_OSPEED_HIGH(GPIOB_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN6) | \ - PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_LOW(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_PIN13) | \ - PIN_ODR_HIGH(GPIOB_PIN14) | \ - PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0) | \ - PIN_AFIO_AF(GPIOB_PIN6, 4) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0) | \ - PIN_AFIO_AF(GPIOB_PIN13, 0) | \ - PIN_AFIO_AF(GPIOB_PIN14, 0) | \ - PIN_AFIO_AF(GPIOB_PIN15, 0)) - -/* - * GPIOC setup: - * - * PC0 - PIN0 (input pullup). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - PIN7 (input pullup). - * PC8 - PIN8 (input pullup). - * PC9 - PIN9 (input pullup). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - PIN14 (input floating). - * PC15 - PIN15 (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_INPUT(GPIOC_PIN6) | \ - PIN_MODE_INPUT(GPIOC_PIN7) | \ - PIN_MODE_INPUT(GPIOC_PIN8) | \ - PIN_MODE_INPUT(GPIOC_PIN9) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_PIN14) | \ - PIN_MODE_INPUT(GPIOC_PIN15)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_PIN14) | \ - PIN_OSPEED_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN14) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN15)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_HIGH(GPIOC_PIN6) | \ - PIN_ODR_HIGH(GPIOC_PIN7) | \ - PIN_ODR_HIGH(GPIOC_PIN8) | \ - PIN_ODR_HIGH(GPIOC_PIN9) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_PIN14) | \ - PIN_ODR_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0) | \ - PIN_AFIO_AF(GPIOC_PIN6, 0) | \ - PIN_AFIO_AF(GPIOC_PIN7, 0)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \ - PIN_AFIO_AF(GPIOC_PIN9, 0) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0) | \ - PIN_AFIO_AF(GPIOC_PIN14, 0) | \ - PIN_AFIO_AF(GPIOC_PIN15, 0)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD11 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 L3GD20_CS (output pushpull maximum). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (output pushpull maximum). - * PE9 - PIN9 (output pushpull maximum). - * PE10 - PIN10 (output pushpull maximum). - * PE11 - PIN11 (output pushpull maximum). - * PE12 - PIN12 (output pushpull maximum). - * PE13 - PIN13 (output pushpull maximum). - * PE14 - PIN14 (output pushpull maximum). - * PE15 - PIN15 (output pushpull maximum). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) |\ - PIN_MODE_OUTPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) |\ - PIN_MODE_INPUT(GPIOE_PIN5) |\ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_OUTPUT(GPIOE_PIN8) | \ - PIN_MODE_OUTPUT(GPIOE_PIN9) | \ - PIN_MODE_OUTPUT(GPIOE_PIN10) | \ - PIN_MODE_OUTPUT(GPIOE_PIN11) | \ - PIN_MODE_OUTPUT(GPIOE_PIN12) | \ - PIN_MODE_OUTPUT(GPIOE_PIN13) | \ - PIN_MODE_OUTPUT(GPIOE_PIN14) | \ - PIN_MODE_OUTPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\ - PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\ - PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\ - PIN_OSPEED_HIGH(GPIOE_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\ - PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\ - PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ - PIN_OSPEED_HIGH(GPIOE_PIN8) | \ - PIN_OSPEED_HIGH(GPIOE_PIN9) | \ - PIN_OSPEED_HIGH(GPIOE_PIN10) | \ - PIN_OSPEED_HIGH(GPIOE_PIN11) | \ - PIN_OSPEED_HIGH(GPIOE_PIN12) | \ - PIN_OSPEED_HIGH(GPIOE_PIN13) | \ - PIN_OSPEED_HIGH(GPIOE_PIN14) | \ - PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) |\ - PIN_PUPDR_FLOATING(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) |\ - PIN_PUPDR_PULLUP(GPIOE_PIN5) |\ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN14) |\ - PIN_PUPDR_FLOATING(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_LOW(GPIOE_PIN8) | \ - PIN_ODR_LOW(GPIOE_PIN9) | \ - PIN_ODR_LOW(GPIOE_PIN10) | \ - PIN_ODR_LOW(GPIOE_PIN11) | \ - PIN_ODR_LOW(GPIOE_PIN12) | \ - PIN_ODR_LOW(GPIOE_PIN13) | \ - PIN_ODR_LOW(GPIOE_PIN14) | \ - PIN_ODR_LOW(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0) |\ - PIN_AFIO_AF(GPIOE_PIN3, 0) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0) |\ - PIN_AFIO_AF(GPIOE_PIN5, 0) |\ - PIN_AFIO_AF(GPIOE_PIN6, 0) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0)) - -/* - * GPIOF setup: - * - * PF0 - I2C2_SDA (input floating). - * PF1 - I2C2_SCL (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | \ - PIN_MODE_INPUT(GPIOF_I2C2_SCL) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | \ - PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | \ - PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | \ - PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | \ - PIN_ODR_HIGH(GPIOF_I2C2_SCL) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | \ - PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0)) - -/* - * GPIOG setup: - * - * PG0 - PIN0 (input pullup). - * PG1 - PIN1 (input pullup). - * PG2 - PIN2 (input pullup). - * PG3 - PIN3 (input pullup). - * PG4 - PIN4 (input pullup). - * PG5 - PIN5 (input pullup). - * PG6 - PIN6 (input pullup). - * PG7 - PIN7 (input pullup). - * PG8 - PIN8 (input pullup). - * PG9 - PIN9 (input pullup). - * PG10 - PIN10 (input pullup). - * PG11 - PIN11 (input pullup). - * PG12 - PIN12 (input pullup). - * PG13 - PIN13 (input pullup). - * PG14 - PIN14 (input pullup). - * PG15 - PIN15 (input pullup). - */ -#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \ - PIN_MODE_INPUT(GPIOG_PIN1) | \ - PIN_MODE_INPUT(GPIOG_PIN2) | \ - PIN_MODE_INPUT(GPIOG_PIN3) | \ - PIN_MODE_INPUT(GPIOG_PIN4) | \ - PIN_MODE_INPUT(GPIOG_PIN5) | \ - PIN_MODE_INPUT(GPIOG_PIN6) | \ - PIN_MODE_INPUT(GPIOG_PIN7) | \ - PIN_MODE_INPUT(GPIOG_PIN8) | \ - PIN_MODE_INPUT(GPIOG_PIN9) | \ - PIN_MODE_INPUT(GPIOG_PIN10) | \ - PIN_MODE_INPUT(GPIOG_PIN11) | \ - PIN_MODE_INPUT(GPIOG_PIN12) | \ - PIN_MODE_INPUT(GPIOG_PIN13) | \ - PIN_MODE_INPUT(GPIOG_PIN14) | \ - PIN_MODE_INPUT(GPIOG_PIN15)) -#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) -#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN15)) -#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN15)) -#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \ - PIN_ODR_HIGH(GPIOG_PIN1) | \ - PIN_ODR_HIGH(GPIOG_PIN2) | \ - PIN_ODR_HIGH(GPIOG_PIN3) | \ - PIN_ODR_HIGH(GPIOG_PIN4) | \ - PIN_ODR_HIGH(GPIOG_PIN5) | \ - PIN_ODR_HIGH(GPIOG_PIN6) | \ - PIN_ODR_HIGH(GPIOG_PIN7) | \ - PIN_ODR_HIGH(GPIOG_PIN8) | \ - PIN_ODR_HIGH(GPIOG_PIN9) | \ - PIN_ODR_HIGH(GPIOG_PIN10) | \ - PIN_ODR_HIGH(GPIOG_PIN11) | \ - PIN_ODR_HIGH(GPIOG_PIN12) | \ - PIN_ODR_HIGH(GPIOG_PIN13) | \ - PIN_ODR_HIGH(GPIOG_PIN14) | \ - PIN_ODR_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \ - PIN_AFIO_AF(GPIOG_PIN1, 0) | \ - PIN_AFIO_AF(GPIOG_PIN2, 0) | \ - PIN_AFIO_AF(GPIOG_PIN3, 0) | \ - PIN_AFIO_AF(GPIOG_PIN4, 0) | \ - PIN_AFIO_AF(GPIOG_PIN5, 0) | \ - PIN_AFIO_AF(GPIOG_PIN6, 0) | \ - PIN_AFIO_AF(GPIOG_PIN7, 0)) -#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \ - PIN_AFIO_AF(GPIOG_PIN9, 0) | \ - PIN_AFIO_AF(GPIOG_PIN10, 0) | \ - PIN_AFIO_AF(GPIOG_PIN11, 0) | \ - PIN_AFIO_AF(GPIOG_PIN12, 0) | \ - PIN_AFIO_AF(GPIOG_PIN13, 0) | \ - PIN_AFIO_AF(GPIOG_PIN14, 0) | \ - PIN_AFIO_AF(GPIOG_PIN15, 0)) - -/* - * GPIOH setup: - * - * PH0 - PIN0 (input pullup). - * PH1 - PIN1 (input pullup). - * PH2 - PIN2 (input pullup). - * PH3 - PIN3 (input pullup). - * PH4 - PIN4 (input pullup). - * PH5 - PIN5 (input pullup). - * PH6 - PIN6 (input pullup). - * PH7 - PIN7 (input pullup). - * PH8 - PIN8 (input pullup). - * PH9 - PIN9 (input pullup). - * PH10 - PIN10 (input pullup). - * PH11 - PIN11 (input pullup). - * PH12 - PIN12 (input pullup). - * PH13 - PIN13 (input pullup). - * PH14 - PIN14 (input pullup). - * PH15 - PIN15 (input pullup). - */ -#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | \ - PIN_MODE_INPUT(GPIOH_PIN1) | \ - PIN_MODE_INPUT(GPIOH_PIN2) | \ - PIN_MODE_INPUT(GPIOH_PIN3) | \ - PIN_MODE_INPUT(GPIOH_PIN4) | \ - PIN_MODE_INPUT(GPIOH_PIN5) | \ - PIN_MODE_INPUT(GPIOH_PIN6) | \ - PIN_MODE_INPUT(GPIOH_PIN7) | \ - PIN_MODE_INPUT(GPIOH_PIN8) | \ - PIN_MODE_INPUT(GPIOH_PIN9) | \ - PIN_MODE_INPUT(GPIOH_PIN10) | \ - PIN_MODE_INPUT(GPIOH_PIN11) | \ - PIN_MODE_INPUT(GPIOH_PIN12) | \ - PIN_MODE_INPUT(GPIOH_PIN13) | \ - PIN_MODE_INPUT(GPIOH_PIN14) | \ - PIN_MODE_INPUT(GPIOH_PIN15)) -#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) -#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN15)) -#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN15)) -#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | \ - PIN_ODR_HIGH(GPIOH_PIN1) | \ - PIN_ODR_HIGH(GPIOH_PIN2) | \ - PIN_ODR_HIGH(GPIOH_PIN3) | \ - PIN_ODR_HIGH(GPIOH_PIN4) | \ - PIN_ODR_HIGH(GPIOH_PIN5) | \ - PIN_ODR_HIGH(GPIOH_PIN6) | \ - PIN_ODR_HIGH(GPIOH_PIN7) | \ - PIN_ODR_HIGH(GPIOH_PIN8) | \ - PIN_ODR_HIGH(GPIOH_PIN9) | \ - PIN_ODR_HIGH(GPIOH_PIN10) | \ - PIN_ODR_HIGH(GPIOH_PIN11) | \ - PIN_ODR_HIGH(GPIOH_PIN12) | \ - PIN_ODR_HIGH(GPIOH_PIN13) | \ - PIN_ODR_HIGH(GPIOH_PIN14) | \ - PIN_ODR_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | \ - PIN_AFIO_AF(GPIOH_PIN1, 0) | \ - PIN_AFIO_AF(GPIOH_PIN2, 0) | \ - PIN_AFIO_AF(GPIOH_PIN3, 0) | \ - PIN_AFIO_AF(GPIOH_PIN4, 0) | \ - PIN_AFIO_AF(GPIOH_PIN5, 0) | \ - PIN_AFIO_AF(GPIOH_PIN6, 0) | \ - PIN_AFIO_AF(GPIOH_PIN7, 0)) -#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \ - PIN_AFIO_AF(GPIOH_PIN9, 0) | \ - PIN_AFIO_AF(GPIOH_PIN10, 0) | \ - PIN_AFIO_AF(GPIOH_PIN11, 0) | \ - PIN_AFIO_AF(GPIOH_PIN12, 0) | \ - PIN_AFIO_AF(GPIOH_PIN13, 0) | \ - PIN_AFIO_AF(GPIOH_PIN14, 0) | \ - PIN_AFIO_AF(GPIOH_PIN15, 0)) - - -/* - * USB bus activation macro, required by the USB driver. - */ -// #define usb_lld_connect_bus(usbp) -#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14))) -// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT) -/* - * USB bus de-activation macro, required by the USB driver. - */ -// #define usb_lld_disconnect_bus(usbp) -#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP) -// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12) - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.mk b/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.mk deleted file mode 100644 index 43377629a3..0000000000 --- a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC diff --git a/keyboards/preonic/rev3/bootloader_defs.h b/keyboards/preonic/rev3/bootloader_defs.h deleted file mode 100644 index 3b0e9d20a6..0000000000 --- a/keyboards/preonic/rev3/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/keyboards/preonic/rev3/chconf.h b/keyboards/preonic/rev3/chconf.h deleted file mode 100644 index b52ca7d2c8..0000000000 --- a/keyboards/preonic/rev3/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/preonic/rev3/config.h b/keyboards/preonic/rev3/config.h index 98899dc6ac..3dc9dc4ebf 100644 --- a/keyboards/preonic/rev3/config.h +++ b/keyboards/preonic/rev3/config.h @@ -43,6 +43,10 @@ * #define UNUSED_PINS */ +#define NUMBER_OF_ENCODERS 1 +#define ENCODERS_PAD_A { B12 } +#define ENCODERS_PAD_B { B13 } + #define MUSIC_MAP #undef AUDIO_VOICES #undef C6_AUDIO diff --git a/keyboards/preonic/rev3/halconf.h b/keyboards/preonic/rev3/halconf.h deleted file mode 100644 index 5e5d70219e..0000000000 --- a/keyboards/preonic/rev3/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/preonic/rev3/matrix.c b/keyboards/preonic/rev3/matrix.c index 05f6da71b6..db7a4f2a3a 100644 --- a/keyboards/preonic/rev3/matrix.c +++ b/keyboards/preonic/rev3/matrix.c @@ -21,10 +21,6 @@ static matrix_col_t matrix_debouncing[MATRIX_COLS]; static bool debouncing = false; static uint16_t debouncing_time = 0; -static uint8_t encoder_state = 0; -static int8_t encoder_value = 0; -static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 }; - static bool dip_switch[4] = {0, 0, 0, 0}; __attribute__ ((weak)) @@ -53,12 +49,6 @@ void matrix_init(void) { palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLUP); palSetPadMode(GPIOB, 9, PAL_MODE_INPUT_PULLUP); - // encoder setup - palSetPadMode(GPIOB, 12, PAL_MODE_INPUT_PULLUP); - palSetPadMode(GPIOB, 13, PAL_MODE_INPUT_PULLUP); - - encoder_state = (palReadPad(GPIOB, 12) << 0) | (palReadPad(GPIOB, 13) << 1); - // actual matrix setup palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL); palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL); @@ -110,18 +100,6 @@ uint8_t matrix_scan(void) { } memcpy(last_dip_switch, dip_switch, sizeof(&dip_switch)); - // encoder on B12 and B13 - encoder_state <<= 2; - encoder_state |= (palReadPad(GPIOB, 12) << 0) | (palReadPad(GPIOB, 13) << 1); - encoder_value += encoder_LUT[encoder_state & 0xF]; - if (encoder_value >= ENCODER_RESOLUTION) { - encoder_update(0); - } - if (encoder_value <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise - encoder_update(1); - } - encoder_value %= ENCODER_RESOLUTION; - // actual matrix for (int col = 0; col < MATRIX_COLS; col++) { matrix_col_t data = 0; diff --git a/keyboards/preonic/rev3/mcuconf.h b/keyboards/preonic/rev3/mcuconf.h deleted file mode 100644 index 2d27bee4e6..0000000000 --- a/keyboards/preonic/rev3/mcuconf.h +++ /dev/null @@ -1,257 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F3xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -#undef STM32_HSE_BYPASS -// #error "oh no" -// #endif - -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 4 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/preonic/rev3/rules.mk b/keyboards/preonic/rev3/rules.mk index 7c40d514d2..0c171b2fb0 100644 --- a/keyboards/preonic/rev3/rules.mk +++ b/keyboards/preonic/rev3/rules.mk @@ -1,56 +1,24 @@ # project specific files -SRC = matrix.c +SRC = matrix.c LAYOUTS += ortho_5x12 -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F3xx - -# Linker script to use -# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F303xC - -# Startup code to use -# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f3xx - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = GENERIC_STM32_F303XC - # Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +MCU = STM32F303 # Build Options # comment out to disable the options. # BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover +NKRO_ENABLE = yes # USB Nkey Rollover CUSTOM_MATRIX = yes # Custom matrix file AUDIO_ENABLE = yes RGBLIGHT_ENABLE = no # SERIAL_LINK_ENABLE = yes +ENCODER_ENABLE = yes |