summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--docs/quantum_painter.md25
-rw-r--r--drivers/painter/gc9a01/qp_gc9a01.c9
-rw-r--r--drivers/painter/ili9xxx/qp_ili9163.c9
-rw-r--r--drivers/painter/ili9xxx/qp_ili9341.c9
-rw-r--r--drivers/painter/ili9xxx/qp_ili9488.c120
-rw-r--r--drivers/painter/ili9xxx/qp_ili9488.h37
-rw-r--r--drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h1
-rw-r--r--drivers/painter/ssd1351/qp_ssd1351.c4
-rw-r--r--drivers/painter/st77xx/qp_st7789.c9
-rw-r--r--drivers/painter/tft_panel/qp_tft_panel.c60
-rw-r--r--drivers/painter/tft_panel/qp_tft_panel.h16
-rw-r--r--quantum/painter/qp.h4
-rw-r--r--quantum/painter/rules.mk13
13 files changed, 252 insertions, 64 deletions
diff --git a/docs/quantum_painter.md b/docs/quantum_painter.md
index a3705b62ce..2386a70933 100644
--- a/docs/quantum_painter.md
+++ b/docs/quantum_painter.md
@@ -24,6 +24,7 @@ Hardware supported:
| GC9A01 | RGB LCD (circular) | 240x240 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = gc9a01_spi` |
| ILI9163 | RGB LCD | 128x128 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9163_spi` |
| ILI9341 | RGB LCD | 240x320 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9341_spi` |
+| ILI9488 | RGB LCD | 320x480 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9488_spi` |
| SSD1351 | RGB OLED | 128x128 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ssd1351_spi` |
| ST7789 | RGB LCD | 240x320, 240x240 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = st7789_spi` |
@@ -654,6 +655,30 @@ The maximum number of displays can be configured by changing the following in yo
#define ILI9341_NUM_DEVICES 3
```
+### ILI9488 :id=qp-driver-ili9488
+
+Enabling support for the ILI9488 in Quantum Painter is done by adding the following to `rules.mk`:
+
+```make
+QUANTUM_PAINTER_ENABLE = yes
+QUANTUM_PAINTER_DRIVERS = ili9488_spi
+```
+
+Creating a ILI9488 device in firmware can then be done with the following API:
+
+```c
+painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
+```
+
+The device handle returned from the `qp_ili9488_make_spi_device` function can be used to perform all other drawing operations.
+
+The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
+
+```c
+// 3 displays:
+#define ILI9488_NUM_DEVICES 3
+```
+
### SSD1351 :id=qp-driver-ssd1351
Enabling support for the SSD1351 in Quantum Painter is done by adding the following to `rules.mk`:
diff --git a/drivers/painter/gc9a01/qp_gc9a01.c b/drivers/painter/gc9a01/qp_gc9a01.c
index ad76d58b07..37700a28a4 100644
--- a/drivers/painter/gc9a01/qp_gc9a01.c
+++ b/drivers/painter/gc9a01/qp_gc9a01.c
@@ -102,12 +102,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t gc9a01_driver_vtable = {
.flush = qp_tft_panel_flush,
.pixdata = qp_tft_panel_pixdata,
.viewport = qp_tft_panel_viewport,
- .palette_convert = qp_tft_panel_palette_convert,
- .append_pixels = qp_tft_panel_append_pixels,
+ .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
+ .append_pixels = qp_tft_panel_append_pixels_rgb565,
},
- .rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
- .num_window_bytes = 2,
- .swap_window_coords = false,
+ .num_window_bytes = 2,
+ .swap_window_coords = false,
.opcodes =
{
.display_on = GC9A01_CMD_DISPLAY_ON,
diff --git a/drivers/painter/ili9xxx/qp_ili9163.c b/drivers/painter/ili9xxx/qp_ili9163.c
index beaac0fbb5..14363c7d04 100644
--- a/drivers/painter/ili9xxx/qp_ili9163.c
+++ b/drivers/painter/ili9xxx/qp_ili9163.c
@@ -67,12 +67,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t ili9163_driver_vtable =
.flush = qp_tft_panel_flush,
.pixdata = qp_tft_panel_pixdata,
.viewport = qp_tft_panel_viewport,
- .palette_convert = qp_tft_panel_palette_convert,
- .append_pixels = qp_tft_panel_append_pixels,
+ .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
+ .append_pixels = qp_tft_panel_append_pixels_rgb565,
},
- .rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
- .num_window_bytes = 2,
- .swap_window_coords = false,
+ .num_window_bytes = 2,
+ .swap_window_coords = false,
.opcodes =
{
.display_on = ILI9XXX_CMD_DISPLAY_ON,
diff --git a/drivers/painter/ili9xxx/qp_ili9341.c b/drivers/painter/ili9xxx/qp_ili9341.c
index 1f41dcfc0b..9608f109bd 100644
--- a/drivers/painter/ili9xxx/qp_ili9341.c
+++ b/drivers/painter/ili9xxx/qp_ili9341.c
@@ -74,12 +74,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t ili9341_driver_vtable =
.flush = qp_tft_panel_flush,
.pixdata = qp_tft_panel_pixdata,
.viewport = qp_tft_panel_viewport,
- .palette_convert = qp_tft_panel_palette_convert,
- .append_pixels = qp_tft_panel_append_pixels,
+ .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
+ .append_pixels = qp_tft_panel_append_pixels_rgb565,
},
- .rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
- .num_window_bytes = 2,
- .swap_window_coords = false,
+ .num_window_bytes = 2,
+ .swap_window_coords = false,
.opcodes =
{
.display_on = ILI9XXX_CMD_DISPLAY_ON,
diff --git a/drivers/painter/ili9xxx/qp_ili9488.c b/drivers/painter/ili9xxx/qp_ili9488.c
new file mode 100644
index 0000000000..55cf9f896f
--- /dev/null
+++ b/drivers/painter/ili9xxx/qp_ili9488.c
@@ -0,0 +1,120 @@
+// Copyright 2021 Nick Brassel (@tzarc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qp_internal.h"
+#include "qp_comms.h"
+#include "qp_ili9488.h"
+#include "qp_ili9xxx_opcodes.h"
+#include "qp_tft_panel.h"
+
+#ifdef QUANTUM_PAINTER_ILI9488_SPI_ENABLE
+# include <qp_comms_spi.h>
+#endif // QUANTUM_PAINTER_ILI9488_SPI_ENABLE
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// Common
+
+// Driver storage
+tft_panel_dc_reset_painter_device_t ili9488_drivers[ILI9488_NUM_DEVICES] = {0};
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// Initialization
+
+bool qp_ili9488_init(painter_device_t device, painter_rotation_t rotation) {
+ // clang-format off
+ const uint8_t ili9488_init_sequence[] = {
+ // Command, Delay, N, Data[N]
+ ILI9XXX_CMD_RESET, 120, 0,
+ ILI9XXX_SET_PGAMMA, 0, 15, 0x00, 0x03, 0x09, 0x08, 0x16, 0x0A, 0x3F, 0x78, 0x4C, 0x09, 0x0A, 0x08, 0x16, 0x1A, 0x0F,
+ ILI9XXX_SET_NGAMMA, 0, 15, 0x00, 0x16, 0x19, 0x03, 0x0F, 0x05, 0x32, 0x45, 0x46, 0x04, 0x0E, 0x0D, 0x35, 0x37, 0x0F,
+ ILI9XXX_SET_POWER_CTL_1, 0, 2, 0x17, 0x15,
+ ILI9XXX_SET_POWER_CTL_2, 0, 1, 0x41,
+ ILI9XXX_SET_VCOM_CTL_1, 0, 3, 0x00, 0x12, 0x80,
+ ILI9XXX_SET_PIX_FMT, 0, 1, 0x66,
+ ILI9XXX_SET_RGB_IF_SIG_CTL, 0, 1, 0x80,
+ ILI9XXX_SET_FRAME_CTL_NORMAL, 0, 1, 0xA0,
+ ILI9XXX_SET_INVERSION_CTL, 0, 1, 0x02,
+ ILI9XXX_SET_FUNCTION_CTL, 0, 2, 0x02, 0x02,
+ ILI9XXX_SET_IMAGE_FUNCTION, 0, 1, 0x00,
+ ILI9XXX_SET_PUMP_RATIO_CTL, 0, 4, 0xA9, 0x51, 0x2C, 0x82,
+ ILI9XXX_CMD_SLEEP_OFF, 5, 0,
+ ILI9XXX_CMD_DISPLAY_ON, 20, 0
+ };
+ // clang-format on
+ qp_comms_bulk_command_sequence(device, ili9488_init_sequence, sizeof(ili9488_init_sequence));
+
+ // Configure the rotation (i.e. the ordering and direction of memory writes in GRAM)
+ const uint8_t madctl[] = {
+ [QP_ROTATION_0] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MY,
+ [QP_ROTATION_90] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX | ILI9XXX_MADCTL_MV | ILI9XXX_MADCTL_MY,
+ [QP_ROTATION_180] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX,
+ [QP_ROTATION_270] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MV,
+ };
+ qp_comms_command_databyte(device, ILI9XXX_SET_MEM_ACS_CTL, madctl[rotation]);
+
+ return true;
+}
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// Driver vtable
+
+const struct tft_panel_dc_reset_painter_driver_vtable_t ili9488_driver_vtable = {
+ .base =
+ {
+ .init = qp_ili9488_init,
+ .power = qp_tft_panel_power,
+ .clear = qp_tft_panel_clear,
+ .flush = qp_tft_panel_flush,
+ .pixdata = qp_tft_panel_pixdata,
+ .viewport = qp_tft_panel_viewport,
+ .palette_convert = qp_tft_panel_palette_convert_rgb888,
+ .append_pixels = qp_tft_panel_append_pixels_rgb888,
+ },
+ .num_window_bytes = 2,
+ .swap_window_coords = false,
+ .opcodes =
+ {
+ .display_on = ILI9XXX_CMD_DISPLAY_ON,
+ .display_off = ILI9XXX_CMD_DISPLAY_OFF,
+ .set_column_address = ILI9XXX_SET_COL_ADDR,
+ .set_row_address = ILI9XXX_SET_PAGE_ADDR,
+ .enable_writes = ILI9XXX_SET_MEM,
+ },
+};
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// SPI
+
+#ifdef QUANTUM_PAINTER_ILI9488_SPI_ENABLE
+
+// Factory function for creating a handle to the ILI9488 device
+painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) {
+ for (uint32_t i = 0; i < ILI9488_NUM_DEVICES; ++i) {
+ tft_panel_dc_reset_painter_device_t *driver = &ili9488_drivers[i];
+ if (!driver->base.driver_vtable) {
+ driver->base.driver_vtable = (const struct painter_driver_vtable_t *)&ili9488_driver_vtable;
+ driver->base.comms_vtable = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
+ driver->base.native_bits_per_pixel = 24; // RGB888
+ driver->base.panel_width = panel_width;
+ driver->base.panel_height = panel_height;
+ driver->base.rotation = QP_ROTATION_0;
+ driver->base.offset_x = 0;
+ driver->base.offset_y = 0;
+
+ // SPI and other pin configuration
+ driver->base.comms_config = &driver->spi_dc_reset_config;
+ driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
+ driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
+ driver->spi_dc_reset_config.spi_config.lsb_first = false;
+ driver->spi_dc_reset_config.spi_config.mode = spi_mode;
+ driver->spi_dc_reset_config.dc_pin = dc_pin;
+ driver->spi_dc_reset_config.reset_pin = reset_pin;
+ return (painter_device_t)driver;
+ }
+ }
+ return NULL;
+}
+
+#endif // QUANTUM_PAINTER_ILI9488_SPI_ENABLE
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
diff --git a/drivers/painter/ili9xxx/qp_ili9488.h b/drivers/painter/ili9xxx/qp_ili9488.h
new file mode 100644
index 0000000000..21b8f03322
--- /dev/null
+++ b/drivers/painter/ili9xxx/qp_ili9488.h
@@ -0,0 +1,37 @@
+// Copyright 2021 Nick Brassel (@tzarc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "gpio.h"
+#include "qp_internal.h"
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// Quantum Painter ILI9488 configurables (add to your keyboard's config.h)
+
+#ifndef ILI9488_NUM_DEVICES
+/**
+ * @def This controls the maximum number of ILI9488 devices that Quantum Painter can communicate with at any one time.
+ * Increasing this number allows for multiple displays to be used.
+ */
+# define ILI9488_NUM_DEVICES 1
+#endif
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// Quantum Painter ILI9488 device factories
+
+#ifdef QUANTUM_PAINTER_ILI9488_SPI_ENABLE
+/**
+ * Factory method for an ILI9488 SPI LCD device.
+ *
+ * @param panel_width[in] the width of the display panel
+ * @param panel_height[in] the height of the display panel
+ * @param chip_select_pin[in] the GPIO pin used for SPI chip select
+ * @param dc_pin[in] the GPIO pin used for D/C control
+ * @param reset_pin[in] the GPIO pin used for RST
+ * @param spi_divisor[in] the SPI divisor to use when communicating with the display
+ * @param spi_mode[in] the SPI mode to use when communicating with the display
+ * @return the device handle used with all drawing routines in Quantum Painter
+ */
+painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
+#endif // QUANTUM_PAINTER_ILI9488_SPI_ENABLE
diff --git a/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h b/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h
index 1fa395cb89..47bb703648 100644
--- a/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h
+++ b/drivers/painter/ili9xxx/qp_ili9xxx_opcodes.h
@@ -85,6 +85,7 @@
#define ILI9XXX_SET_NGAMMA 0xE1 // Set negative gamma
#define ILI9XXX_SET_DGAMMA_CTL_1 0xE2 // Set digital gamma ctl 1
#define ILI9XXX_SET_DGAMMA_CTL_2 0xE3 // Set digital gamma ctl 2
+#define ILI9XXX_SET_IMAGE_FUNCTION 0xE9 // Set image function
#define ILI9XXX_ENABLE_3_GAMMA 0xF2 // Enable 3 gamma
#define ILI9XXX_SET_IF_CTL 0xF6 // Set interface control
#define ILI9XXX_SET_PUMP_RATIO_CTL 0xF7 // Set pump ratio control
diff --git a/drivers/painter/ssd1351/qp_ssd1351.c b/drivers/painter/ssd1351/qp_ssd1351.c
index 970e7e67f3..67854133aa 100644
--- a/drivers/painter/ssd1351/qp_ssd1351.c
+++ b/drivers/painter/ssd1351/qp_ssd1351.c
@@ -71,8 +71,8 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t ssd1351_driver_vtable =
.flush = qp_tft_panel_flush,
.pixdata = qp_tft_panel_pixdata,
.viewport = qp_tft_panel_viewport,
- .palette_convert = qp_tft_panel_palette_convert,
- .append_pixels = qp_tft_panel_append_pixels,
+ .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
+ .append_pixels = qp_tft_panel_append_pixels_rgb565,
},
.rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
.num_window_bytes = 1,
diff --git a/drivers/painter/st77xx/qp_st7789.c b/drivers/painter/st77xx/qp_st7789.c
index d005ece050..49e8436c29 100644
--- a/drivers/painter/st77xx/qp_st7789.c
+++ b/drivers/painter/st77xx/qp_st7789.c
@@ -90,12 +90,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t st7789_driver_vtable = {
.flush = qp_tft_panel_flush,
.pixdata = qp_tft_panel_pixdata,
.viewport = qp_tft_panel_viewport,
- .palette_convert = qp_tft_panel_palette_convert,
- .append_pixels = qp_tft_panel_append_pixels,
+ .palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
+ .append_pixels = qp_tft_panel_append_pixels_rgb565,
},
- .rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
- .num_window_bytes = 2,
- .swap_window_coords = false,
+ .num_window_bytes = 2,
+ .swap_window_coords = false,
.opcodes =
{
.display_on = ST77XX_CMD_DISPLAY_ON,
diff --git a/drivers/painter/tft_panel/qp_tft_panel.c b/drivers/painter/tft_panel/qp_tft_panel.c
index 4d636c9509..ad83b6c792 100644
--- a/drivers/painter/tft_panel/qp_tft_panel.c
+++ b/drivers/painter/tft_panel/qp_tft_panel.c
@@ -10,29 +10,6 @@
#define BYTE_SWAP(x) (((((uint16_t)(x)) >> 8) & 0x00FF) | ((((uint16_t)(x)) << 8) & 0xFF00))
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// Native pixel format conversion
-
-uint16_t qp_rgb888_to_rgb565(uint8_t r, uint8_t g, uint8_t b) {
- uint16_t rgb565 = (((uint16_t)r) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)b) >> 3);
- return rgb565;
-}
-
-uint16_t qp_rgb888_to_rgb565_swapped(uint8_t r, uint8_t g, uint8_t b) {
- uint16_t rgb565 = (((uint16_t)r) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)b) >> 3);
- return BYTE_SWAP(rgb565);
-}
-
-uint16_t qp_rgb888_to_bgr565(uint8_t r, uint8_t g, uint8_t b) {
- uint16_t bgr565 = (((uint16_t)b) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)r) >> 3);
- return bgr565;
-}
-
-uint16_t qp_rgb888_to_bgr565_swapped(uint8_t r, uint8_t g, uint8_t b) {
- uint16_t bgr565 = (((uint16_t)b) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)r) >> 3);
- return BYTE_SWAP(bgr565);
-}
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Quantum Painter API implementations
// Power control
@@ -105,26 +82,49 @@ bool qp_tft_panel_viewport(painter_device_t device, uint16_t left, uint16_t top,
// Stream pixel data to the current write position in GRAM
bool qp_tft_panel_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count) {
- qp_comms_send(device, pixel_data, native_pixel_count * sizeof(uint16_t));
+ struct painter_driver_t *driver = (struct painter_driver_t *)device;
+ qp_comms_send(device, pixel_data, native_pixel_count * driver->native_bits_per_pixel / 8);
return true;
}
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Convert supplied palette entries into their native equivalents
-bool qp_tft_panel_palette_convert(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) {
- struct painter_driver_t * driver = (struct painter_driver_t *)device;
- struct tft_panel_dc_reset_painter_driver_vtable_t *vtable = (struct tft_panel_dc_reset_painter_driver_vtable_t *)driver->driver_vtable;
+
+bool qp_tft_panel_palette_convert_rgb565_swapped(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) {
for (int16_t i = 0; i < palette_size; ++i) {
- RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v});
- palette[i].rgb565 = vtable->rgb888_to_native16bit(rgb.r, rgb.g, rgb.b);
+ RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v});
+ uint16_t rgb565 = (((uint16_t)rgb.r) >> 3) << 11 | (((uint16_t)rgb.g) >> 2) << 5 | (((uint16_t)rgb.b) >> 3);
+ palette[i].rgb565 = BYTE_SWAP(rgb565);
}
return true;
}
+bool qp_tft_panel_palette_convert_rgb888(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) {
+ for (int16_t i = 0; i < palette_size; ++i) {
+ RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v});
+ palette[i].rgb888.r = rgb.r;
+ palette[i].rgb888.g = rgb.g;
+ palette[i].rgb888.b = rgb.b;
+ }
+ return true;
+}
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Append pixels to the target location, keyed by the pixel index
-bool qp_tft_panel_append_pixels(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) {
+
+bool qp_tft_panel_append_pixels_rgb565(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) {
uint16_t *buf = (uint16_t *)target_buffer;
for (uint32_t i = 0; i < pixel_count; ++i) {
buf[pixel_offset + i] = palette[palette_indices[i]].rgb565;
}
return true;
}
+
+bool qp_tft_panel_append_pixels_rgb888(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) {
+ for (uint32_t i = 0; i < pixel_count; ++i) {
+ target_buffer[(pixel_offset + i) * 3 + 0] = palette[palette_indices[i]].rgb888.r;
+ target_buffer[(pixel_offset + i) * 3 + 1] = palette[palette_indices[i]].rgb888.g;
+ target_buffer[(pixel_offset + i) * 3 + 2] = palette[palette_indices[i]].rgb888.b;
+ }
+ return true;
+}
diff --git a/drivers/painter/tft_panel/qp_tft_panel.h b/drivers/painter/tft_panel/qp_tft_panel.h
index 6eddfc503d..3cb015891b 100644
--- a/drivers/painter/tft_panel/qp_tft_panel.h
+++ b/drivers/painter/tft_panel/qp_tft_panel.h
@@ -11,15 +11,10 @@
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Common TFT panel implementation using D/C, and RST pins.
-typedef uint16_t (*rgb888_to_native_uint16_t)(uint8_t r, uint8_t g, uint8_t b);
-
// Driver vtable with extras
struct tft_panel_dc_reset_painter_driver_vtable_t {
struct painter_driver_vtable_t base; // must be first, so it can be cast to/from the painter_driver_vtable_t* type
- // Conversion function for palette entries
- rgb888_to_native_uint16_t rgb888_to_native16bit;
-
// Number of bytes for transmitting x/y coordinates
uint8_t num_window_bytes;
@@ -58,10 +53,9 @@ bool qp_tft_panel_clear(painter_device_t device);
bool qp_tft_panel_flush(painter_device_t device);
bool qp_tft_panel_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom);
bool qp_tft_panel_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count);
-bool qp_tft_panel_palette_convert(painter_device_t device, int16_t palette_size, qp_pixel_t *palette);
-bool qp_tft_panel_append_pixels(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices);
-uint16_t qp_rgb888_to_rgb565(uint8_t r, uint8_t g, uint8_t b);
-uint16_t qp_rgb888_to_rgb565_swapped(uint8_t r, uint8_t g, uint8_t b);
-uint16_t qp_rgb888_to_bgr565(uint8_t r, uint8_t g, uint8_t b);
-uint16_t qp_rgb888_to_bgr565_swapped(uint8_t r, uint8_t g, uint8_t b);
+bool qp_tft_panel_palette_convert_rgb565_swapped(painter_device_t device, int16_t palette_size, qp_pixel_t *palette);
+bool qp_tft_panel_palette_convert_rgb888(painter_device_t device, int16_t palette_size, qp_pixel_t *palette);
+
+bool qp_tft_panel_append_pixels_rgb565(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices);
+bool qp_tft_panel_append_pixels_rgb888(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices);
diff --git a/quantum/painter/qp.h b/quantum/painter/qp.h
index e1c14d156c..47f077d0cf 100644
--- a/quantum/painter/qp.h
+++ b/quantum/painter/qp.h
@@ -440,6 +440,10 @@ int16_t qp_drawtext_recolor(painter_device_t device, uint16_t x, uint16_t y, pai
# include "qp_ili9341.h"
#endif // QUANTUM_PAINTER_ILI9341_ENABLE
+#ifdef QUANTUM_PAINTER_ILI9488_ENABLE
+# include "qp_ili9488.h"
+#endif // QUANTUM_PAINTER_ILI9488_ENABLE
+
#ifdef QUANTUM_PAINTER_ST7789_ENABLE
# include "qp_st7789.h"
#endif // QUANTUM_PAINTER_ST7789_ENABLE
diff --git a/quantum/painter/rules.mk b/quantum/painter/rules.mk
index 9115d3d406..675a1a5460 100644
--- a/quantum/painter/rules.mk
+++ b/quantum/painter/rules.mk
@@ -3,7 +3,7 @@ QUANTUM_PAINTER_DRIVERS ?=
QUANTUM_PAINTER_ANIMATIONS_ENABLE ?= yes
# The list of permissible drivers that can be listed in QUANTUM_PAINTER_DRIVERS
-VALID_QUANTUM_PAINTER_DRIVERS := ili9163_spi ili9341_spi st7789_spi gc9a01_spi ssd1351_spi
+VALID_QUANTUM_PAINTER_DRIVERS := ili9163_spi ili9341_spi ili9488_spi st7789_spi gc9a01_spi ssd1351_spi
#-------------------------------------------------------------------------------
@@ -61,6 +61,17 @@ define handle_quantum_painter_driver
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
$(DRIVER_PATH)/painter/ili9xxx/qp_ili9341.c \
+ else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),ili9488_spi)
+ QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
+ QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
+ OPT_DEFS += -DQUANTUM_PAINTER_ILI9488_ENABLE -DQUANTUM_PAINTER_ILI9488_SPI_ENABLE
+ COMMON_VPATH += \
+ $(DRIVER_PATH)/painter/tft_panel \
+ $(DRIVER_PATH)/painter/ili9xxx
+ SRC += \
+ $(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
+ $(DRIVER_PATH)/painter/ili9xxx/qp_ili9488.c \
+
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),st7789_spi)
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-10 00:05:28 +0000