diff options
| -rw-r--r-- | tmk_core/avr.mk | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk index eb55dba95c..bd58bd285f 100644 --- a/tmk_core/avr.mk +++ b/tmk_core/avr.mk @@ -9,7 +9,7 @@ SIZE = avr-size AR = avr-ar rcs NM = avr-nm HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature -EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) +EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) BIN = COMMON_VPATH += $(DRIVER_PATH)/avr @@ -124,16 +124,16 @@ qmk: $(BUILD_DIR)/$(TARGET).hex program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep check-size $(PROGRAM_CMD) -teensy: $(BUILD_DIR)/$(TARGET).hex check-size +teensy: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware $(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex - -BATCHISP ?= batchisp + +BATCHISP ?= batchisp flip: $(BUILD_DIR)/$(TARGET).hex check-size $(BATCHISP) -hardware usb -device $(MCU) -operation erase f $(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program $(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0 - + DFU_PROGRAMMER ?= dfu-programmer GREP ?= grep @@ -169,7 +169,7 @@ dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep fi $(DFU_PROGRAMMER) $(MCU) reset -avrdude: $(BUILD_DIR)/$(TARGET).hex check-size +avrdude: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware if $(GREP) -q -s Microsoft /proc/version; then \ echo 'ERROR: AVR flashing cannot be automated within the Windows Subsystem for Linux (WSL) currently. Instead, take the .hex file generated and flash it using AVRDUDE, AVRDUDESS, or XLoader.'; \ else \ @@ -199,7 +199,7 @@ bin: $(BUILD_DIR)/$(TARGET).hex # copy bin to FLASH.bin flashbin: bin - $(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin; + $(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin; # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -250,7 +250,7 @@ extcoff: $(BUILD_DIR)/$(TARGET).elf @$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof $(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof -bootloader: +bootloader: make -C lib/lufa/Bootloaders/DFU/ clean echo -e "#ifndef QMK_KEYBOARD\n#define QMK_KEYBOARD\n" > lib/lufa/Bootloaders/DFU/Keyboard.h echo -e `$(GREP) "MANUFACTURER" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h @@ -264,7 +264,7 @@ bootloader: echo -e "BootloaderDFU.hex copied to $(TARGET)_bootloader.hex" cp lib/lufa/Bootloaders/DFU/BootloaderDFU.hex $(TARGET)_bootloader.hex -production: $(BUILD_DIR)/$(TARGET).hex bootloader +production: $(BUILD_DIR)/$(TARGET).hex bootloader cpfirmware @cat $(BUILD_DIR)/$(TARGET).hex | awk '/^:00000001FF/ == 0' > $(TARGET)_production.hex @cat $(TARGET)_bootloader.hex >> $(TARGET)_production.hex echo "File sizes:" |