summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--docs/feature_pointing_device.md70
-rw-r--r--drivers/sensors/adns5050.h18
-rw-r--r--drivers/sensors/adns9800.h6
-rw-r--r--drivers/sensors/cirque_pinnacle.h6
-rw-r--r--drivers/sensors/paw3204.h12
-rw-r--r--drivers/sensors/pmw33xx_common.h8
6 files changed, 80 insertions, 40 deletions
diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md
index c46cf34ee6..999dd1272d 100644
--- a/docs/feature_pointing_device.md
+++ b/docs/feature_pointing_device.md
@@ -22,11 +22,13 @@ POINTING_DEVICE_DRIVER = adns5050
The ADNS 5050 sensor uses a serial type protocol for communication, and requires an additional light source.
-| Setting | Description |
-| ------------------- | ------------------------------------------------------------------- |
-| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. |
-| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. |
-| `ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. |
+| Setting | Description | Default |
+| ------------------- | ------------------------------------------------------------------- | -------------------------- |
+| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` |
+| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` |
+| `ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. | `POINTING_DEVICE_CS_PIN` |
+
+
The CPI range is 125-1375, in increments of 125. Defaults to 500 CPI.
@@ -40,13 +42,13 @@ POINTING_DEVICE_DRIVER = adns9800
The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surface tracking.
-| Setting | Description | Default |
-| ----------------------- | ---------------------------------------------------------------------- | ------------- |
-| `ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
-| `ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
-| `ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
-| `ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
-| `ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
+| Setting | Description | Default |
+| ----------------------- | ---------------------------------------------------------------------- | ------------------------ |
+| `ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
+| `ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
+| `ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
+| `ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
+| `ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` |
The CPI range is 800-8200, in increments of 200. Defaults to 1800 CPI.
@@ -116,13 +118,13 @@ Default attenuation is set to 4X, although if you are using a thicker overlay (s
| `CIRQUE_PINNACLE_ADDR` | (Required) Sets the I2C Address for the Cirque Trackpad | `0x2A` |
| `CIRQUE_PINNACLE_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `20` |
-| SPI Setting | Description | Default |
-| ------------------------------ | ---------------------------------------------------------------------- | ------------- |
-| `CIRQUE_PINNACLE_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `1000000` |
-| `CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
-| `CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` |
-| `CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
-| `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
+| SPI Setting | Description | Default |
+| ------------------------------ | ---------------------------------------------------------------------- | ------------------------ |
+| `CIRQUE_PINNACLE_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `1000000` |
+| `CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
+| `CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` |
+| `CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
+| `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` |
Default Scaling is 1024. Actual CPI depends on trackpad diameter.
@@ -170,10 +172,10 @@ POINTING_DEVICE_DRIVER = paw3204
The paw 3204 sensor uses a serial type protocol for communication, and requires an additional light source.
-| Setting | Description |
-|--------------------|---------------------------------------------------------------------|
-|`PAW3204_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. |
-|`PAW3204_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. |
+| Setting | Description | Default |
+| ------------------ |--------------------------------------------------------------- | -------------------------- |
+| `PAW3204_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` |
+| `PAW3204_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` |
The CPI range is 400-1600, with supported values of (400, 500, 600, 800, 1000, 1200 and 1600). Defaults to 1000 CPI.
@@ -217,15 +219,15 @@ The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI.
Both PMW 3360 and PMW 3389 are SPI driven optical sensors, that use a built in IR LED for surface tracking.
-| Setting | Description | Default |
-| ---------------------------- | ------------------------------------------------------------------------------------------- | ------------- |
-| `PMW33XX_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
-| `PMW33XX_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ |
-| `PMW33XX_CPI` | (Optional) Sets counts per inch sensitivity of the sensor. | _varies_ |
-| `PMW33XX_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
-| `PMW33XX_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
-| `PMW33XX_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` |
-| `ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 127 degrees directly in the sensor. | `0` |
+| Setting | Description | Default |
+| ---------------------------- | ------------------------------------------------------------------------------------------- | ------------------------ |
+| `PMW33XX_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` |
+| `PMW33XX_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ |
+| `PMW33XX_CPI` | (Optional) Sets counts per inch sensitivity of the sensor. | _varies_ |
+| `PMW33XX_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
+| `PMW33XX_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
+| `PMW33XX_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` |
+| `ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 127 degrees directly in the sensor. | `0` |
To use multiple sensors, instead of setting `PMW33XX_CS_PIN` you need to set `PMW33XX_CS_PINS` and also handle and merge the read from this sensor in user code.
Note that different (per sensor) values of CPI, speed liftoff, rotational angle or flipping of X/Y is not currently supported.
@@ -290,9 +292,13 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {}
| `POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ |
| `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE` | (Optional) Enable inertial cursor. Cursor continues moving after a flick gesture and slows down by kinetic friction. | _not defined_ |
| `POINTING_DEVICE_GESTURES_SCROLL_ENABLE` | (Optional) Enable scroll gesture. The gesture that activates the scroll is device dependent. | _not defined_ |
+| `POINTING_DEVICE_CS_PIN` | (Optional) Provides a default CS pin, useful for supporting multiple sensor configs. | _not defined_ |
+| `POINTING_DEVICE_SDIO_PIN` | (Optional) Provides a default SDIO pin, useful for supporting multiple sensor configs. | _not defined_ |
+| `POINTING_DEVICE_SCLK_PIN` | (Optional) Provides a default SCLK pin, useful for supporting multiple sensor configs. | _not defined_ |
!> When using `SPLIT_POINTING_ENABLE` the `POINTING_DEVICE_MOTION_PIN` functionality is not supported and `POINTING_DEVICE_TASK_THROTTLE_MS` will default to `1`. Increasing this value will increase transport performance at the cost of possible mouse responsiveness.
+The `POINTING_DEVICE_CS_PIN`, `POINTING_DEVICE_SDIO_PIN`, and `POINTING_DEVICE_SCLK_PIN` provide a convenient way to define a single pin that can be used for an interchangeable sensor config. This allows you to have a single config, without defining each device. Each sensor allows for this to be overridden with their own defines.
!> Any pointing device with a lift/contact status can integrate inertial cursor feature into its driver, controlled by `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE`. e.g. PMW3360 can use Lift_Stat from Motion register. Note that `POINTING_DEVICE_MOTION_PIN` cannot be used with this feature; continuous polling of `get_report()` is needed to generate glide reports.
diff --git a/drivers/sensors/adns5050.h b/drivers/sensors/adns5050.h
index e45a250196..f20c2f74bc 100644
--- a/drivers/sensors/adns5050.h
+++ b/drivers/sensors/adns5050.h
@@ -40,15 +40,27 @@
// Definitions for the ADNS serial line.
#ifndef ADNS5050_SCLK_PIN
-# error "No clock pin defined -- missing ADNS5050_SCLK_PIN"
+# ifdef POINTING_DEVICE_SCLK_PIN
+# define ADNS5050_SCLK_PIN POINTING_DEVICE_SCLK_PIN
+# else
+# error "No clock pin defined -- missing POINTING_DEVICE_SCLK_PIN or ADNS5050_SCLK_PIN"
+# endif
#endif
#ifndef ADNS5050_SDIO_PIN
-# error "No data pin defined -- missing ADNS5050_SDIO_PIN"
+# ifdef POINTING_DEVICE_SDIO_PIN
+# define ADNS5050_SDIO_PIN POINTING_DEVICE_SDIO_PIN
+# else
+# error "No data pin defined -- missing POINTING_DEVICE_SDIO_PIN or ADNS5050_SDIO_PIN"
+# endif
#endif
#ifndef ADNS5050_CS_PIN
-# error "No chip select pin defined -- missing ADNS5050_CS_PIN"
+# ifdef POINTING_DEVICE_CS_PIN
+# define ADNS5050_CS_PIN POINTING_DEVICE_CS_PIN
+# else
+# error "No chip select pin defined -- missing POINTING_DEVICE_CS_PIN or ADNS5050_CS_PIN define"
+# endif
#endif
typedef struct {
diff --git a/drivers/sensors/adns9800.h b/drivers/sensors/adns9800.h
index e75a869c03..3f1a005789 100644
--- a/drivers/sensors/adns9800.h
+++ b/drivers/sensors/adns9800.h
@@ -43,7 +43,11 @@
#endif
#ifndef ADNS9800_CS_PIN
-# error "No chip select pin defined -- missing ADNS9800_CS_PIN"
+# ifdef POINTING_DEVICE_CS_PIN
+# define ADNS9800_CS_PIN POINTING_DEVICE_CS_PIN
+# else
+# error "No chip select pin defined -- missing POINTING_DEVICE_CS_PIN or ADNS9800_CS_PIN"
+# endif
#endif
typedef struct {
diff --git a/drivers/sensors/cirque_pinnacle.h b/drivers/sensors/cirque_pinnacle.h
index 320e7d936e..fa06e047f2 100644
--- a/drivers/sensors/cirque_pinnacle.h
+++ b/drivers/sensors/cirque_pinnacle.h
@@ -78,7 +78,11 @@
# define CIRQUE_PINNACLE_SPI_DIVISOR 64
# endif
# ifndef CIRQUE_PINNACLE_SPI_CS_PIN
-# error "No Chip Select pin has been defined -- missing CIRQUE_PINNACLE_SPI_CS_PIN define"
+# ifdef POINTING_DEVICE_CS_PIN
+# define CIRQUE_PINNACLE_SPI_CS_PIN POINTING_DEVICE_CS_PIN
+# else
+# error "No Chip Select pin has been defined -- missing POINTING_DEVICE_CS_PIN or CIRQUE_PINNACLE_SPI_CS_PIN define"
+# endif
# endif
# endif
#endif
diff --git a/drivers/sensors/paw3204.h b/drivers/sensors/paw3204.h
index bf6dbd04a0..7f487d90dc 100644
--- a/drivers/sensors/paw3204.h
+++ b/drivers/sensors/paw3204.h
@@ -20,10 +20,18 @@
#include <stdbool.h>
#ifndef PAW3204_SCLK_PIN
-# error "No clock pin defined -- missing PAW3204_SCLK_PIN"
+# ifdef POINTING_DEVICE_SCLK_PIN
+# define PAW3204_SCLK_PIN POINTING_DEVICE_SCLK_PIN
+# else
+# error "No clock pin defined -- missing POINTING_DEVICE_SCLK_PIN or PAW3204_SCLK_PIN"
+# endif
#endif
#ifndef PAW3204_SDIO_PIN
-# error "No data pin defined -- missing PAW3204_SDIO_PIN"
+# ifdef POINTING_DEVICE_SDIO_PIN
+# define PAW3204_SDIO_PIN POINTING_DEVICE_SDIO_PIN
+# else
+# error "No data pin defined -- missing POINTING_DEVICE_SDIO_PIN or PAW3204_SDIO_PIN"
+# endif
#endif
typedef struct {
diff --git a/drivers/sensors/pmw33xx_common.h b/drivers/sensors/pmw33xx_common.h
index 87e8b34d5c..c725e80f24 100644
--- a/drivers/sensors/pmw33xx_common.h
+++ b/drivers/sensors/pmw33xx_common.h
@@ -66,7 +66,13 @@ _Static_assert(sizeof((pmw33xx_report_t){0}.motion) == 1, "pmw33xx_report_t.moti
// Support single and plural spellings
#ifndef PMW33XX_CS_PINS
# ifndef PMW33XX_CS_PIN
-# error "No chip select pin defined -- missing PMW33XX_CS_PIN or PMW33XX_CS_PINS"
+# ifdef POINTING_DEVICE_CS_PIN
+# define PMW33XX_CS_PIN POINTING_DEVICE_CS_PIN
+# define PMW33XX_CS_PINS \
+ { PMW33XX_CS_PIN }
+# else
+# error "No chip select pin defined -- missing PMW33XX_CS_PIN or PMW33XX_CS_PINS"
+# endif
# else
# define PMW33XX_CS_PINS \
{ PMW33XX_CS_PIN }
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-10 00:27:06 +0000