diff options
Diffstat (limited to 'builddefs')
| -rw-r--r-- | builddefs/bootloader.mk | 4 | ||||
| -rw-r--r-- | builddefs/build_keyboard.mk | 33 | ||||
| -rw-r--r-- | builddefs/build_test.mk | 3 | ||||
| -rw-r--r-- | builddefs/common_features.mk | 117 | ||||
| -rw-r--r-- | builddefs/common_rules.mk | 117 | ||||
| -rw-r--r-- | builddefs/mcu_selection.mk | 35 | ||||
| -rw-r--r-- | builddefs/show_options.mk | 2 | ||||
| -rw-r--r-- | builddefs/testlist.mk | 1 |
8 files changed, 171 insertions, 141 deletions
diff --git a/builddefs/bootloader.mk b/builddefs/bootloader.mk index eba8e280e4..3d4c03b01c 100644 --- a/builddefs/bootloader.mk +++ b/builddefs/bootloader.mk @@ -200,6 +200,10 @@ ifeq ($(strip $(BOOTLOADER)), tinyuf2) OPT_DEFS += -DBOOTLOADER_TINYUF2 BOOTLOADER_TYPE = tinyuf2 endif +ifeq ($(strip $(BOOTLOADER)), rp2040) + OPT_DEFS += -DBOOTLOADER_RP2040 + BOOTLOADER_TYPE = rp2040 +endif ifeq ($(strip $(BOOTLOADER)), halfkay) OPT_DEFS += -DBOOTLOADER_HALFKAY BOOTLOADER_TYPE = halfkay diff --git a/builddefs/build_keyboard.mk b/builddefs/build_keyboard.mk index dc86b232df..b5616a438f 100644 --- a/builddefs/build_keyboard.mk +++ b/builddefs/build_keyboard.mk @@ -13,6 +13,14 @@ endif include paths.mk include $(BUILDDEFS_PATH)/message.mk +# Helper to add defines with a 'QMK_' prefix +define add_qmk_prefix_defs + ifdef $1 + # Need to cater for 'STM32L4xx+' + OPT_DEFS += -DQMK_$(2)="$($1)" -DQMK_$(2)_$(shell echo $($1) | sed -e 's@+@Plus@g' -e 's@[^a-zA-Z0-9]@_@g' | tr '[:lower:]' '[:upper:]') + endif +endef + # Set the qmk cli to use QMK_BIN ?= qmk @@ -390,10 +398,12 @@ ifneq ("$(KEYMAP_H)","") CONFIG_H += $(KEYMAP_H) endif +OPT_DEFS += -DKEYMAP_C=\"$(KEYMAP_C)\" + # project specific files SRC += \ $(KEYBOARD_SRC) \ - $(KEYMAP_C) \ + $(QUANTUM_DIR)/keymap_introspection.c \ $(QUANTUM_SRC) \ $(QUANTUM_DIR)/main.c \ @@ -436,6 +446,14 @@ else include $(TMK_PATH)/protocol/$(PLATFORM_KEY).mk endif +# Setup definitions based on the selected MCU +$(eval $(call add_qmk_prefix_defs,MCU_ORIG,MCU)) +$(eval $(call add_qmk_prefix_defs,MCU_ARCH,MCU_ARCH)) +$(eval $(call add_qmk_prefix_defs,MCU_PORT_NAME,MCU_PORT_NAME)) +$(eval $(call add_qmk_prefix_defs,MCU_FAMILY,MCU_FAMILY)) +$(eval $(call add_qmk_prefix_defs,MCU_SERIES,MCU_SERIES)) +$(eval $(call add_qmk_prefix_defs,BOARD,BOARD)) + # TODO: remove this bodge? PROJECT_DEFS := $(OPT_DEFS) PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS) @@ -469,6 +487,19 @@ check-size: build check-md5: build objs-size: build +ifeq ($(strip $(TOP_SYMBOLS)),yes) +all: top-symbols +check-size: top-symbols +top-symbols: build + echo "###########################################" + echo "# Highest flash usage:" + $(NM) -Crtd --size-sort $(BUILD_DIR)/$(TARGET).elf | grep -i ' [t] ' | head -n10 | sed -e 's#^0000000# #g' -e 's#^000000# #g' -e 's#^00000# #g' -e 's#^0000# #g' -e 's#^000# #g' -e 's#^00# #g' -e 's#^0# #g' + echo "###########################################" + echo "# Highest RAM usage:" + $(NM) -Crtd --size-sort $(BUILD_DIR)/$(TARGET).elf | grep -i ' [dbv] ' | head -n10 | sed -e 's#^0000000# #g' -e 's#^000000# #g' -e 's#^00000# #g' -e 's#^0000# #g' -e 's#^000# #g' -e 's#^00# #g' -e 's#^0# #g' + echo "###########################################" +endif + include $(BUILDDEFS_PATH)/show_options.mk include $(BUILDDEFS_PATH)/common_rules.mk diff --git a/builddefs/build_test.mk b/builddefs/build_test.mk index 5ad33b19c5..bd9b372c33 100644 --- a/builddefs/build_test.mk +++ b/builddefs/build_test.mk @@ -42,7 +42,7 @@ VPATH += \ all: elf -VPATH += $(COMMON_VPATH) +VPATH += $(TEST_PATH) $(COMMON_VPATH) PLATFORM:=TEST PLATFORM_KEY:=test BOOTLOADER_TYPE:=none @@ -63,6 +63,7 @@ include $(TMK_PATH)/protocol.mk include $(QUANTUM_PATH)/debounce/tests/rules.mk include $(QUANTUM_PATH)/encoder/tests/rules.mk include $(QUANTUM_PATH)/sequencer/tests/rules.mk +include $(QUANTUM_PATH)/wear_leveling/tests/rules.mk include $(PLATFORM_PATH)/test/rules.mk ifneq ($(filter $(FULL_TESTS),$(TEST)),) include $(BUILDDEFS_PATH)/build_full_test.mk diff --git a/builddefs/common_features.mk b/builddefs/common_features.mk index c976b8296d..2edc1bdef0 100644 --- a/builddefs/common_features.mk +++ b/builddefs/common_features.mk @@ -92,10 +92,29 @@ ifeq ($(MUSIC_ENABLE), yes) SRC += $(QUANTUM_DIR)/process_keycode/process_music.c endif +VALID_STENO_PROTOCOL_TYPES := geminipr txbolt all +STENO_PROTOCOL ?= all ifeq ($(strip $(STENO_ENABLE)), yes) - OPT_DEFS += -DSTENO_ENABLE - VIRTSER_ENABLE ?= yes - SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c + ifeq ($(filter $(STENO_PROTOCOL),$(VALID_STENO_PROTOCOL_TYPES)),) + $(call CATASTROPHIC_ERROR,Invalid STENO_PROTOCOL,STENO_PROTOCOL="$(STENO_PROTOCOL)" is not a valid stenography protocol) + else + OPT_DEFS += -DSTENO_ENABLE + VIRTSER_ENABLE ?= yes + + ifeq ($(strip $(STENO_PROTOCOL)), geminipr) + OPT_DEFS += -DSTENO_ENABLE_GEMINI + endif + ifeq ($(strip $(STENO_PROTOCOL)), txbolt) + OPT_DEFS += -DSTENO_ENABLE_BOLT + endif + ifeq ($(strip $(STENO_PROTOCOL)), all) + OPT_DEFS += -DSTENO_ENABLE_ALL + OPT_DEFS += -DSTENO_ENABLE_GEMINI + OPT_DEFS += -DSTENO_ENABLE_BOLT + endif + + SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c + endif endif ifeq ($(strip $(VIRTSER_ENABLE)), yes) @@ -154,33 +173,36 @@ ifeq ($(strip $(QUANTUM_PAINTER_ENABLE)), yes) include $(QUANTUM_DIR)/painter/rules.mk endif -VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi +VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi wear_leveling EEPROM_DRIVER ?= vendor ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),) $(call CATASTROPHIC_ERROR,Invalid EEPROM_DRIVER,EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver) else OPT_DEFS += -DEEPROM_ENABLE + COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/eeprom + COMMON_VPATH += $(DRIVER_PATH)/eeprom + COMMON_VPATH += $(PLATFORM_COMMON_DIR) ifeq ($(strip $(EEPROM_DRIVER)), custom) # Custom EEPROM implementation -- only needs to implement init/erase/read_block/write_block OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_CUSTOM - COMMON_VPATH += $(DRIVER_PATH)/eeprom SRC += eeprom_driver.c + else ifeq ($(strip $(EEPROM_DRIVER)), wear_leveling) + # Wear-leveling EEPROM implementation + OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_WEAR_LEVELING + SRC += eeprom_driver.c eeprom_wear_leveling.c else ifeq ($(strip $(EEPROM_DRIVER)), i2c) # External I2C EEPROM implementation OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_I2C - COMMON_VPATH += $(DRIVER_PATH)/eeprom QUANTUM_LIB_SRC += i2c_master.c SRC += eeprom_driver.c eeprom_i2c.c else ifeq ($(strip $(EEPROM_DRIVER)), spi) # External SPI EEPROM implementation OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_SPI - COMMON_VPATH += $(DRIVER_PATH)/eeprom QUANTUM_LIB_SRC += spi_master.c SRC += eeprom_driver.c eeprom_spi.c else ifeq ($(strip $(EEPROM_DRIVER)), transient) # Transient EEPROM implementation -- no data storage but provides runtime area for it OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT - COMMON_VPATH += $(DRIVER_PATH)/eeprom SRC += eeprom_driver.c eeprom_transient.c else ifeq ($(strip $(EEPROM_DRIVER)), vendor) # Vendor-implemented EEPROM @@ -191,17 +213,13 @@ else ifneq ($(filter STM32F3xx_% STM32F1xx_% %_STM32F401xC %_STM32F401xE %_STM32F405xG %_STM32F411xE %_STM32F072xB %_STM32F042x6 %_GD32VF103xB %_GD32VF103x8, $(MCU_SERIES)_$(MCU_LDSCRIPT)),) # Emulated EEPROM OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_STM32_FLASH_EMULATED - COMMON_VPATH += $(DRIVER_PATH)/eeprom - SRC += eeprom_driver.c - SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c - SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c + COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/flash + COMMON_VPATH += $(DRIVER_PATH)/flash + SRC += eeprom_driver.c eeprom_stm32.c flash_stm32.c else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),) # True EEPROM on STM32L0xx, L1xx OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_STM32_L0_L1 - COMMON_VPATH += $(DRIVER_PATH)/eeprom - COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/eeprom - SRC += eeprom_driver.c - SRC += eeprom_stm32_L0_L1.c + SRC += eeprom_driver.c eeprom_stm32_L0_L1.c else ifneq ($(filter $(MCU_SERIES),KL2x K20x),) # Teensy EEPROM implementations OPT_DEFS += -DEEPROM_TEENSY @@ -209,32 +227,61 @@ else else # Fall back to transient, i.e. non-persistent OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT - COMMON_VPATH += $(DRIVER_PATH)/eeprom SRC += eeprom_driver.c eeprom_transient.c endif else ifeq ($(PLATFORM),ARM_ATSAM) # arm_atsam EEPROM OPT_DEFS += -DEEPROM_SAMD - SRC += $(PLATFORM_COMMON_DIR)/eeprom_samd.c + SRC += eeprom_samd.c else ifeq ($(PLATFORM),TEST) # Test harness "EEPROM" OPT_DEFS += -DEEPROM_TEST_HARNESS - SRC += $(PLATFORM_COMMON_DIR)/eeprom.c + SRC += eeprom.c + endif + endif +endif + +VALID_WEAR_LEVELING_DRIVER_TYPES := custom embedded_flash spi_flash legacy +WEAR_LEVELING_DRIVER ?= none +ifneq ($(strip $(WEAR_LEVELING_DRIVER)),none) + ifeq ($(filter $(WEAR_LEVELING_DRIVER),$(VALID_WEAR_LEVELING_DRIVER_TYPES)),) + $(call CATASTROPHIC_ERROR,Invalid WEAR_LEVELING_DRIVER,WEAR_LEVELING_DRIVER="$(WEAR_LEVELING_DRIVER)" is not a valid wear leveling driver) + else + FNV_ENABLE := yes + OPT_DEFS += -DWEAR_LEVELING_ENABLE + OPT_DEFS += -DWEAR_LEVELING_$(strip $(shell echo $(WEAR_LEVELING_DRIVER) | tr '[:lower:]' '[:upper:]')) + COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/wear_leveling + COMMON_VPATH += $(DRIVER_PATH)/wear_leveling + COMMON_VPATH += $(QUANTUM_DIR)/wear_leveling + SRC += wear_leveling.c + ifeq ($(strip $(WEAR_LEVELING_DRIVER)), embedded_flash) + OPT_DEFS += -DHAL_USE_EFL + SRC += wear_leveling_efl.c + POST_CONFIG_H += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/wear_leveling/wear_leveling_efl_config.h + else ifeq ($(strip $(WEAR_LEVELING_DRIVER)), spi_flash) + FLASH_DRIVER := spi + SRC += wear_leveling_flash_spi.c + POST_CONFIG_H += $(DRIVER_PATH)/wear_leveling/wear_leveling_flash_spi_config.h + else ifeq ($(strip $(WEAR_LEVELING_DRIVER)), legacy) + COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/flash + SRC += flash_stm32.c wear_leveling_legacy.c + POST_CONFIG_H += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/wear_leveling/wear_leveling_legacy_config.h endif endif endif VALID_FLASH_DRIVER_TYPES := spi -FLASH_DRIVER ?= no -ifneq ($(strip $(FLASH_DRIVER)), no) +FLASH_DRIVER ?= none +ifneq ($(strip $(FLASH_DRIVER)), none) ifeq ($(filter $(FLASH_DRIVER),$(VALID_FLASH_DRIVER_TYPES)),) - $(error FLASH_DRIVER="$(FLASH_DRIVER)" is not a valid FLASH driver) + $(call CATASTROPHIC_ERROR,Invalid FLASH_DRIVER,FLASH_DRIVER="$(FLASH_DRIVER)" is not a valid flash driver) else OPT_DEFS += -DFLASH_ENABLE - ifeq ($(strip $(FLASH_DRIVER)), spi) + ifeq ($(strip $(FLASH_DRIVER)),spi) OPT_DEFS += -DFLASH_DRIVER -DFLASH_SPI COMMON_VPATH += $(DRIVER_PATH)/flash SRC += flash_spi.c + QUANTUM_LIB_SRC += spi_master.c endif endif endif @@ -500,7 +547,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes) endif endif -VALID_WS2812_DRIVER_TYPES := bitbang pwm spi i2c +VALID_WS2812_DRIVER_TYPES := bitbang pwm spi i2c vendor WS2812_DRIVER ?= bitbang ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes) @@ -542,12 +589,6 @@ ifeq ($(strip $(LED_TABLES)), yes) SRC += $(QUANTUM_DIR)/led_tables.c endif -ifeq ($(strip $(TERMINAL_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c - OPT_DEFS += -DTERMINAL_ENABLE - OPT_DEFS += -DUSER_PRINT -endif - ifeq ($(strip $(VIA_ENABLE)), yes) DYNAMIC_KEYMAP_ENABLE := yes RAW_ENABLE := yes @@ -595,6 +636,14 @@ ifneq ($(strip $(DEBOUNCE_TYPE)), custom) QUANTUM_SRC += $(QUANTUM_DIR)/debounce/$(strip $(DEBOUNCE_TYPE)).c endif + +VALID_SERIAL_DRIVER_TYPES := bitbang usart vendor + +SERIAL_DRIVER ?= bitbang +ifeq ($(filter $(SERIAL_DRIVER),$(VALID_SERIAL_DRIVER_TYPES)),) + $(call CATASTROPHIC_ERROR,Invalid SERIAL_DRIVER,SERIAL_DRIVER="$(SERIAL_DRIVER)" is not a valid SERIAL driver) +endif + ifeq ($(strip $(SPLIT_KEYBOARD)), yes) POST_CONFIG_H += $(QUANTUM_DIR)/split_common/post_config.h OPT_DEFS += -DSPLIT_KEYBOARD @@ -619,11 +668,11 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes) endif endif - SERIAL_DRIVER ?= bitbang OPT_DEFS += -DSERIAL_DRIVER_$(strip $(shell echo $(SERIAL_DRIVER) | tr '[:lower:]' '[:upper:]')) ifeq ($(strip $(SERIAL_DRIVER)), bitbang) QUANTUM_LIB_SRC += serial.c else + QUANTUM_LIB_SRC += serial_protocol.c QUANTUM_LIB_SRC += serial_$(strip $(SERIAL_DRIVER)).c endif endif @@ -635,6 +684,12 @@ ifeq ($(strip $(CRC_ENABLE)), yes) SRC += crc.c endif +ifeq ($(strip $(FNV_ENABLE)), yes) + OPT_DEFS += -DFNV_ENABLE + VPATH += $(LIB_PATH)/fnv + SRC += qmk_fnv_type_validation.c hash_32a.c hash_64a.c +endif + ifeq ($(strip $(HAPTIC_ENABLE)),yes) COMMON_VPATH += $(DRIVER_PATH)/haptic diff --git a/builddefs/common_rules.mk b/builddefs/common_rules.mk index d3acddc87b..6573257c78 100644 --- a/builddefs/common_rules.mk +++ b/builddefs/common_rules.mk @@ -1,19 +1,5 @@ # Hey Emacs, this is a -*- makefile -*- #---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jg Wunsch, et al. -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# # Enable vpath seraching for source files only # Without this, output files, could be read from the wrong .build directories @@ -38,36 +24,15 @@ NO_LTO_OBJ := $(filter %.a,$(OBJ)) MASTER_OUTPUT := $(firstword $(OUTPUTS)) - - # Output format. (can be srec, ihex, binary) FORMAT = ihex # Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT ?= s -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu99 - - -# Place -D or -U options here for C sources -#CDEFS += - - -# Place -D or -U options here for ASM sources -#ADEFS += - - -# Place -D or -U options here for C++ sources -#CXXDEFS += -D__STDC_LIMIT_MACROS -#CXXDEFS += -D__STDC_CONSTANT_MACROS -#CXXDEFS += +# Compiler flag to set the C and C++ language standard level +CSTANDARD = -std=gnu11 +CXXSTANDARD = -std=gnu++14 # Speed up recompilations by opt-in usage of ccache USE_CCACHE ?= no @@ -75,12 +40,8 @@ ifneq ($(USE_CCACHE),no) CC_PREFIX ?= ccache endif -#---------------- Compiler Options C ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. +#---------------- C Compiler Options ---------------- + ifeq ($(strip $(LTO_ENABLE)), yes) ifeq ($(PLATFORM),ARM_ATSAM) $(info Enabling LTO on arm_atsam-targeting boards is known to have a high likelihood of failure.) @@ -111,23 +72,14 @@ CFLAGS += -Wstrict-prototypes ifneq ($(strip $(ALLOW_WARNINGS)), yes) CFLAGS += -Werror endif -#CFLAGS += -mshort-calls -#CFLAGS += -fno-unit-at-a-time -#CFLAGS += -Wundef -#CFLAGS += -Wunreachable-code -#CFLAGS += -Wsign-compare CFLAGS += $(CSTANDARD) # This fixes lots of keyboards linking errors but SHOULDN'T BE A FINAL SOLUTION # Fixing of multiple variable definitions must be made. CFLAGS += -fcommon -#---------------- Compiler Options C++ ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. +#---------------- C++ Compiler Options ---------------- + ifeq ($(strip $(DEBUG_ENABLE)),yes) CXXFLAGS += -g$(DEBUG) endif @@ -141,57 +93,17 @@ CXXFLAGS += -Wundef ifneq ($(strip $(ALLOW_WARNINGS)), yes) CXXFLAGS += -Werror endif -#CXXFLAGS += -mshort-calls -#CXXFLAGS += -fno-unit-at-a-time -#CXXFLAGS += -Wstrict-prototypes -#CXXFLAGS += -Wunreachable-code -#CXXFLAGS += -Wsign-compare -#CXXFLAGS += $(CSTANDARD) #---------------- Assembler Options ---------------- + ASFLAGS += $(ADEFS) ifeq ($(VERBOSE_AS_CMD),yes) ASFLAGS += -v endif -#---------------- Library Options ---------------- -# Minimalistic printf version -PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min - -# Floating point printf version (requires MATH_LIB = -lm below) -PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt - -# If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = -#PRINTF_LIB = $(PRINTF_LIB_MIN) -#PRINTF_LIB = $(PRINTF_LIB_FLOAT) - - -# Minimalistic scanf version -SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min - -# Floating point + %[ scanf version (requires MATH_LIB = -lm below) -SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt - -# If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = -#SCANF_LIB = $(SCANF_LIB_MIN) -#SCANF_LIB = $(SCANF_LIB_FLOAT) - - -MATH_LIB = -lm -CREATE_MAP ?= yes - - #---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -# -# Comennt out "--relax" option to avoid a error such: -# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12' -# +CREATE_MAP ?= yes ifeq ($(CREATE_MAP),yes) LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref endif @@ -201,20 +113,11 @@ endif #LDFLAGS += -Wl,--relax LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) -LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) -#LDFLAGS += -T linker_script.x +LDFLAGS += -lm # You can give EXTRALDFLAGS at 'make' command line. LDFLAGS += $(EXTRALDFLAGS) #---------------- Assembler Listings ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. ADHLNS_ENABLE ?= no ifeq ($(ADHLNS_ENABLE),yes) diff --git a/builddefs/mcu_selection.mk b/builddefs/mcu_selection.mk index d5fb731e08..d676e0c06a 100644 --- a/builddefs/mcu_selection.mk +++ b/builddefs/mcu_selection.mk @@ -116,6 +116,41 @@ ifneq ($(findstring MK66FX1M0, $(MCU)),) BOARD ?= PJRC_TEENSY_3_6 endif +ifneq ($(findstring RP2040, $(MCU)),) + # Cortex version + MCU = cortex-m0plus + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + CHIBIOS_PORT = ARMv6-M-RP2 + + ## chip/board settings + # - the next two should match the directories in + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = RP + MCU_SERIES = RP2040 + + # Linker script to use + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + STARTUPLD_CONTRIB = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld + MCU_LDSCRIPT ?= RP2040_FLASH + LDFLAGS += -L $(STARTUPLD_CONTRIB) + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= rp2040 + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_PROMICRO_RP2040 + + # Default UF2 Bootloader settings + UF2_FAMILY ?= RP2040 + FIRMWARE_FORMAT ?= uf2 +endif + ifneq ($(findstring STM32F042, $(MCU)),) # Cortex version MCU = cortex-m0 diff --git a/builddefs/show_options.mk b/builddefs/show_options.mk index f67d009191..98537e6da2 100644 --- a/builddefs/show_options.mk +++ b/builddefs/show_options.mk @@ -5,7 +5,6 @@ BUILD_OPTION_NAMES = \ CONSOLE_ENABLE \ COMMAND_ENABLE \ NKRO_ENABLE \ - TERMINAL_ENABLE \ CUSTOM_MATRIX \ DEBOUNCE_TYPE \ SPLIT_KEYBOARD \ @@ -46,6 +45,7 @@ OTHER_OPTION_NAMES = \ LEADER_ENABLE \ PRINTING_ENABLE \ STENO_ENABLE \ + STENO_PROTOCOL \ TAP_DANCE_ENABLE \ VIRTSER_ENABLE \ OLED_ENABLE \ diff --git a/builddefs/testlist.mk b/builddefs/testlist.mk index b8d22bce80..8a30a44972 100644 --- a/builddefs/testlist.mk +++ b/builddefs/testlist.mk @@ -4,6 +4,7 @@ FULL_TESTS := $(notdir $(TEST_LIST)) include $(QUANTUM_PATH)/debounce/tests/testlist.mk include $(QUANTUM_PATH)/encoder/tests/testlist.mk include $(QUANTUM_PATH)/sequencer/tests/testlist.mk +include $(QUANTUM_PATH)/wear_leveling/tests/testlist.mk include $(PLATFORM_PATH)/test/testlist.mk define VALIDATE_TEST_LIST |