summaryrefslogtreecommitdiff
path: root/builddefs
diff options
context:
space:
mode:
Diffstat (limited to 'builddefs')
-rw-r--r--builddefs/build_keyboard.mk17
-rw-r--r--builddefs/build_test.mk2
-rw-r--r--builddefs/common_features.mk30
-rw-r--r--builddefs/common_rules.mk117
-rw-r--r--builddefs/show_options.mk1
5 files changed, 36 insertions, 131 deletions
diff --git a/builddefs/build_keyboard.mk b/builddefs/build_keyboard.mk
index dc86b232df..2b9ec48e70 100644
--- a/builddefs/build_keyboard.mk
+++ b/builddefs/build_keyboard.mk
@@ -390,10 +390,12 @@ ifneq ("$(KEYMAP_H)","")
CONFIG_H += $(KEYMAP_H)
endif
+OPT_DEFS += -DKEYMAP_C=\"$(KEYMAP_C)\"
+
# project specific files
SRC += \
$(KEYBOARD_SRC) \
- $(KEYMAP_C) \
+ $(QUANTUM_DIR)/keymap_introspection.c \
$(QUANTUM_SRC) \
$(QUANTUM_DIR)/main.c \
@@ -469,6 +471,19 @@ check-size: build
check-md5: build
objs-size: build
+ifeq ($(strip $(TOP_SYMBOLS)),yes)
+all: top-symbols
+check-size: top-symbols
+top-symbols: build
+ echo "###########################################"
+ echo "# Highest flash usage:"
+ $(NM) -Crtd --size-sort $(BUILD_DIR)/$(TARGET).elf | grep -i ' [t] ' | head -n10 | sed -e 's#^0000000# #g' -e 's#^000000# #g' -e 's#^00000# #g' -e 's#^0000# #g' -e 's#^000# #g' -e 's#^00# #g' -e 's#^0# #g'
+ echo "###########################################"
+ echo "# Highest RAM usage:"
+ $(NM) -Crtd --size-sort $(BUILD_DIR)/$(TARGET).elf | grep -i ' [dbv] ' | head -n10 | sed -e 's#^0000000# #g' -e 's#^000000# #g' -e 's#^00000# #g' -e 's#^0000# #g' -e 's#^000# #g' -e 's#^00# #g' -e 's#^0# #g'
+ echo "###########################################"
+endif
+
include $(BUILDDEFS_PATH)/show_options.mk
include $(BUILDDEFS_PATH)/common_rules.mk
diff --git a/builddefs/build_test.mk b/builddefs/build_test.mk
index 5ad33b19c5..834184f221 100644
--- a/builddefs/build_test.mk
+++ b/builddefs/build_test.mk
@@ -42,7 +42,7 @@ VPATH += \
all: elf
-VPATH += $(COMMON_VPATH)
+VPATH += $(TEST_PATH) $(COMMON_VPATH)
PLATFORM:=TEST
PLATFORM_KEY:=test
BOOTLOADER_TYPE:=none
diff --git a/builddefs/common_features.mk b/builddefs/common_features.mk
index c976b8296d..ff0c6b0cc6 100644
--- a/builddefs/common_features.mk
+++ b/builddefs/common_features.mk
@@ -160,27 +160,26 @@ ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),)
$(call CATASTROPHIC_ERROR,Invalid EEPROM_DRIVER,EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver)
else
OPT_DEFS += -DEEPROM_ENABLE
+ COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/eeprom
+ COMMON_VPATH += $(DRIVER_PATH)/eeprom
+ COMMON_VPATH += $(PLATFORM_COMMON_DIR)
ifeq ($(strip $(EEPROM_DRIVER)), custom)
# Custom EEPROM implementation -- only needs to implement init/erase/read_block/write_block
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_CUSTOM
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c
else ifeq ($(strip $(EEPROM_DRIVER)), i2c)
# External I2C EEPROM implementation
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_I2C
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
QUANTUM_LIB_SRC += i2c_master.c
SRC += eeprom_driver.c eeprom_i2c.c
else ifeq ($(strip $(EEPROM_DRIVER)), spi)
# External SPI EEPROM implementation
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_SPI
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
QUANTUM_LIB_SRC += spi_master.c
SRC += eeprom_driver.c eeprom_spi.c
else ifeq ($(strip $(EEPROM_DRIVER)), transient)
# Transient EEPROM implementation -- no data storage but provides runtime area for it
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c eeprom_transient.c
else ifeq ($(strip $(EEPROM_DRIVER)), vendor)
# Vendor-implemented EEPROM
@@ -191,17 +190,13 @@ else
ifneq ($(filter STM32F3xx_% STM32F1xx_% %_STM32F401xC %_STM32F401xE %_STM32F405xG %_STM32F411xE %_STM32F072xB %_STM32F042x6 %_GD32VF103xB %_GD32VF103x8, $(MCU_SERIES)_$(MCU_LDSCRIPT)),)
# Emulated EEPROM
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_STM32_FLASH_EMULATED
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
- SRC += eeprom_driver.c
- SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
- SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
+ COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/flash
+ COMMON_VPATH += $(DRIVER_PATH)/flash
+ SRC += eeprom_driver.c eeprom_stm32.c flash_stm32.c
else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),)
# True EEPROM on STM32L0xx, L1xx
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_STM32_L0_L1
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
- COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/eeprom
- SRC += eeprom_driver.c
- SRC += eeprom_stm32_L0_L1.c
+ SRC += eeprom_driver.c eeprom_stm32_L0_L1.c
else ifneq ($(filter $(MCU_SERIES),KL2x K20x),)
# Teensy EEPROM implementations
OPT_DEFS += -DEEPROM_TEENSY
@@ -209,17 +204,16 @@ else
else
# Fall back to transient, i.e. non-persistent
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c eeprom_transient.c
endif
else ifeq ($(PLATFORM),ARM_ATSAM)
# arm_atsam EEPROM
OPT_DEFS += -DEEPROM_SAMD
- SRC += $(PLATFORM_COMMON_DIR)/eeprom_samd.c
+ SRC += eeprom_samd.c
else ifeq ($(PLATFORM),TEST)
# Test harness "EEPROM"
OPT_DEFS += -DEEPROM_TEST_HARNESS
- SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
+ SRC += eeprom.c
endif
endif
endif
@@ -542,12 +536,6 @@ ifeq ($(strip $(LED_TABLES)), yes)
SRC += $(QUANTUM_DIR)/led_tables.c
endif
-ifeq ($(strip $(TERMINAL_ENABLE)), yes)
- SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c
- OPT_DEFS += -DTERMINAL_ENABLE
- OPT_DEFS += -DUSER_PRINT
-endif
-
ifeq ($(strip $(VIA_ENABLE)), yes)
DYNAMIC_KEYMAP_ENABLE := yes
RAW_ENABLE := yes
diff --git a/builddefs/common_rules.mk b/builddefs/common_rules.mk
index d3acddc87b..6573257c78 100644
--- a/builddefs/common_rules.mk
+++ b/builddefs/common_rules.mk
@@ -1,19 +1,5 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jg Wunsch, et al.
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-#
# Enable vpath seraching for source files only
# Without this, output files, could be read from the wrong .build directories
@@ -38,36 +24,15 @@ NO_LTO_OBJ := $(filter %.a,$(OBJ))
MASTER_OUTPUT := $(firstword $(OUTPUTS))
-
-
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT ?= s
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-#CDEFS +=
-
-
-# Place -D or -U options here for ASM sources
-#ADEFS +=
-
-
-# Place -D or -U options here for C++ sources
-#CXXDEFS += -D__STDC_LIMIT_MACROS
-#CXXDEFS += -D__STDC_CONSTANT_MACROS
-#CXXDEFS +=
+# Compiler flag to set the C and C++ language standard level
+CSTANDARD = -std=gnu11
+CXXSTANDARD = -std=gnu++14
# Speed up recompilations by opt-in usage of ccache
USE_CCACHE ?= no
@@ -75,12 +40,8 @@ ifneq ($(USE_CCACHE),no)
CC_PREFIX ?= ccache
endif
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
+#---------------- C Compiler Options ----------------
+
ifeq ($(strip $(LTO_ENABLE)), yes)
ifeq ($(PLATFORM),ARM_ATSAM)
$(info Enabling LTO on arm_atsam-targeting boards is known to have a high likelihood of failure.)
@@ -111,23 +72,14 @@ CFLAGS += -Wstrict-prototypes
ifneq ($(strip $(ALLOW_WARNINGS)), yes)
CFLAGS += -Werror
endif
-#CFLAGS += -mshort-calls
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wundef
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
CFLAGS += $(CSTANDARD)
# This fixes lots of keyboards linking errors but SHOULDN'T BE A FINAL SOLUTION
# Fixing of multiple variable definitions must be made.
CFLAGS += -fcommon
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
+#---------------- C++ Compiler Options ----------------
+
ifeq ($(strip $(DEBUG_ENABLE)),yes)
CXXFLAGS += -g$(DEBUG)
endif
@@ -141,57 +93,17 @@ CXXFLAGS += -Wundef
ifneq ($(strip $(ALLOW_WARNINGS)), yes)
CXXFLAGS += -Werror
endif
-#CXXFLAGS += -mshort-calls
-#CXXFLAGS += -fno-unit-at-a-time
-#CXXFLAGS += -Wstrict-prototypes
-#CXXFLAGS += -Wunreachable-code
-#CXXFLAGS += -Wsign-compare
-#CXXFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
+
ASFLAGS += $(ADEFS)
ifeq ($(VERBOSE_AS_CMD),yes)
ASFLAGS += -v
endif
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-CREATE_MAP ?= yes
-
-
#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#
-# Comennt out "--relax" option to avoid a error such:
-# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
-#
+CREATE_MAP ?= yes
ifeq ($(CREATE_MAP),yes)
LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
endif
@@ -201,20 +113,11 @@ endif
#LDFLAGS += -Wl,--relax
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
+LDFLAGS += -lm
# You can give EXTRALDFLAGS at 'make' command line.
LDFLAGS += $(EXTRALDFLAGS)
#---------------- Assembler Listings ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
ADHLNS_ENABLE ?= no
ifeq ($(ADHLNS_ENABLE),yes)
diff --git a/builddefs/show_options.mk b/builddefs/show_options.mk
index f67d009191..1c1c189f27 100644
--- a/builddefs/show_options.mk
+++ b/builddefs/show_options.mk
@@ -5,7 +5,6 @@ BUILD_OPTION_NAMES = \
CONSOLE_ENABLE \
COMMAND_ENABLE \
NKRO_ENABLE \
- TERMINAL_ENABLE \
CUSTOM_MATRIX \
DEBOUNCE_TYPE \
SPLIT_KEYBOARD \