diff options
Diffstat (limited to 'converter/adb_usb')
| -rw-r--r-- | converter/adb_usb/README.md | 105 |
1 files changed, 56 insertions, 49 deletions
diff --git a/converter/adb_usb/README.md b/converter/adb_usb/README.md index 21ad318c1d..46082ff67f 100644 --- a/converter/adb_usb/README.md +++ b/converter/adb_usb/README.md @@ -7,70 +7,69 @@ But binary size is about 10KB or more it doesn't fit into 8K flash like ATMega8U Discuss: http://geekhack.org/showwiki.php?title=Island:14290 + +README FIRST +------------ +https://github.com/tmk/tmk_keyboard +https://github.com/tmk/tmk_keyboard/tree/master/converter/adb_usb + +Also check these when you are in trouble. + +https://github.com/tmk/tmk_keyboard/wiki +https://github.com/tmk/tmk_keyboard/labels/NOTE + + Wiring ------ -0. Connect ADB keyboard to Teensy by 3 lines(Vcc, GND, Data). By default Data line uses port PD0. - This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable. - The external pull-up resistor(1K-10K Ohm) on Data is strongly recommended. -1. Define following macros for ADB connection in config.h if you use other than port PD0. - ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT -2. make -3. program Teensy +Connect ADB pins to controller just by 3 lines(Vcc, GND, Data). By default Data line uses port PD0. + +ADB female socket from the front: + + ,--_--. + / o4 3o \ 1: DATA + | o2 1o | 2: Power SW + - === - 3: VCC + `-___-' 4: GND + +This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable. The external pull-up resistor(1K-10K Ohm) on Data is strongly recommended.(It is almost must!) +https://github.com/tmk/tmk_keyboard/wiki/FAQ#pull-up-resistor + +Pull-up resister: + + Keyboard Conveter + ,------. + 5V------+------|VCC | + | | | + [R] | | + | | | + Signal--+------|PD0 | + | | + GND------------|GND | + `------' + R: 1K Ohm resistor + + +Define following macros for ADB connection in config.h if you use other than port PD0. + + ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT Build ----- -Just make +See doc/build.md. In short, $ make clean $ make -If your keyboard is ISO layout +You can select keymap(ansi is default) like this: - $ make KEYMAP=iso - - -LOCKING CAPSLOCK ----------------- -Many of old ADB keyboards have mechanical push-lock switch for Capslock key and this converter supports the locking Capslock key by default. See README in top directory for more detail about this feature. - -Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch. -http://www.youtube.com/watch?v=9wqnt2mGJ2Y + $ make KEYMAP=[ansi|iso|hasu] Keymap ------ -You can change a keymap by editing code of keymap.c like following. -This is a keymap for AEK, however, also used for other keyboards. -How to define the keymap is probably obvious. You can find key symbols in keycode.h. -If you want to define some keymaps than just one, see hhkb/keymap.c and -macway/keymap.c as examples. Keymap(layer) switching may needs a bit of -effort at this time. - - /* Default Layer: plain keymap - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,---. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr| - * `---' `---------------' `---------------' `---------------' `-----------' `---' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| =| /| *| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| -| - * |-----------------------------------------------------------| `-----------' |---------------| - * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| +| - * |-----------------------------------------------------------| ,---. |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | - * |-----------------------------------------------------------| ,-----------. |-----------|Ent| - * |Ctrl |Alt |Gui | Space |Gui |Alt |Ctrl | |Lef|Dow|Rig| | 0| .| | - * `-----------------------------------------------------------' `-----------' `---------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,EQL, PSLS,PAST, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, PMNS, - LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), +You can change a keymap by editing code of keymap_[ansi|iso|hasu|yours].c. +How to define the keymap is probably obvious. You can find key symbols in common/keycode.h. And see doc/keymap.md for more detail. Magic command @@ -78,6 +77,14 @@ Magic command To get help press `h` holding Magic key. Magic key is `Power key`. +Locking CapsLock +---------------- +Many of old ADB keyboards have mechanical push-lock switch for Capslock key and this converter supports the locking Capslock key by default. See README in top directory for more detail about this feature. +https://github.com/tmk/tmk_keyboard/blob/master/README.md#mechanical-locking-support + +Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch. + + Notes ----- Not-extended ADB keyboards have no discrimination between right modifier and left one, |