summaryrefslogtreecommitdiff
path: root/converter/ascii_usb
diff options
context:
space:
mode:
Diffstat (limited to 'converter/ascii_usb')
-rw-r--r--converter/ascii_usb/Makefile82
-rw-r--r--converter/ascii_usb/README38
-rw-r--r--converter/ascii_usb/config.h70
-rw-r--r--converter/ascii_usb/keymap.c42
-rw-r--r--converter/ascii_usb/led.c25
-rw-r--r--converter/ascii_usb/matrix.c195
6 files changed, 0 insertions, 452 deletions
diff --git a/converter/ascii_usb/Makefile b/converter/ascii_usb/Makefile
deleted file mode 100644
index 6d977afc05..0000000000
--- a/converter/ascii_usb/Makefile
+++ /dev/null
@@ -1,82 +0,0 @@
-# Target file name (without extension).
-TARGET = ascii_usb
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
- led.c \
- protocol/serial_uart.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Build Options
-# *Comment out* to disable the options.
-#
-#MOUSEKEY_ENABLE = yes # Mouse keys
-#EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-#NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-# Boot Section Size in bytes
-# Teensy halfKay 512
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/ascii_usb/README b/converter/ascii_usb/README
deleted file mode 100644
index 02fa064ed4..0000000000
--- a/converter/ascii_usb/README
+++ /dev/null
@@ -1,38 +0,0 @@
-ASCII to USB keyboard protocol converter
-========================================
-This converts serial console terminal into USB keyboard, tested with TRS-80 model 100 TELCOM application.
-Target MCU is ATMega32u4 but other USB capable AVR will also work.
-
-
-Hardware
---------
-Connect RX, TX and GND to UART pin of AVR. Note that you may need line driver/level shifter like MAX232 to interface high voltage of RS-232C.
-
-
-
-Build Firmware
---------------
-Configure UART setting and Just use 'make'
-
- $ cd ascii_usb
- $ make
-
-Then, load the binary to MCU with your favorite programmer.
-
-
-
-Limitation
-----------
-- This cannot see key up event, you cannot hold a key.
-- Alt, Gui(Win/Mac) modifier key are not available.
-
-
-
-TRS-80 model 100
-----------------
-Use TELCOM program with setting: 19200bps/8bit/odd parity/1stop bit
-To set this configuration push Stat(F3) and input '9801D,10'. Then push Term(F4) to connect.
-
-
-
-
diff --git a/converter/ascii_usb/config.h b/converter/ascii_usb/config.h
deleted file mode 100644
index 0908997a53..0000000000
--- a/converter/ascii_usb/config.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
-Copyright 2014 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x5C01
-#define DEVICE_VER 0x0100
-#define MANUFACTURER t.m.k.
-#define PRODUCT ASCII keyboard converter
-#define DESCRIPTION converts Serial Console Terminal into USB keyboard
-
-
-/* matrix size */
-#define MATRIX_ROWS 16
-#define MATRIX_COLS 16
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- host_get_first_key() == KC_BRK \
-)
-
-
-/*
- * Serial(USART) configuration
- * asynchronous, positive logic, 19200baud, bit order: LSB first
- * 1-start bit, 8-data bit, odd parity, 1-stop bit
- */
-#ifdef __AVR_ATmega32U4__
- #define SERIAL_UART_BAUD 19200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
- UCSR1C |= (1<<UPM11) | (1<<UPM10); /* parity: none(00), even(01), odd(11) */ \
- sei(); \
- } while(0)
-#else
- #error "USART configuration is needed."
-#endif
-
-/* disable action features */
-#define NO_ACTION_LAYER
-#define NO_ACTION_TAPPING
-#define NO_ACTION_ONESHOT
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION
-
-
-#endif
diff --git a/converter/ascii_usb/keymap.c b/converter/ascii_usb/keymap.c
deleted file mode 100644
index a0c61ce8de..0000000000
--- a/converter/ascii_usb/keymap.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "action.h"
-#include "action_macro.h"
-#include "action_util.h"
-#include "util.h"
-#include "print.h"
-#include "keymap.h"
-
-
-// Keymap is not used. See matrix.c.
-
-/* translates key to keycode */
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
- return KC_NO;
-}
-
-/* translates Fn keycode to action */
-action_t keymap_fn_to_action(uint8_t keycode)
-{
- return (action_t) { .code = ACTION_NO };
-}
diff --git a/converter/ascii_usb/led.c b/converter/ascii_usb/led.c
deleted file mode 100644
index d1c39bc653..0000000000
--- a/converter/ascii_usb/led.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "serial.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-}
diff --git a/converter/ascii_usb/matrix.c b/converter/ascii_usb/matrix.c
deleted file mode 100644
index e1ea8e0ab8..0000000000
--- a/converter/ascii_usb/matrix.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
-Copyright 2014 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "util.h"
-#include "matrix.h"
-#include "debug.h"
-#include "action_util.h"
-#include "protocol/serial.h"
-
-
-/*
- * Not use Matrix.
- *
- * ROW: 16(4bits)
- * COL: 16(4bits)
- *
- * 8bit wide
- * +---------+
- * 0|00 ... 0F|
- * 1|08 ... 1F|
- * :| ... |
- * :| ... |
- * E|E0 ... EF|
- * F|F0 ... FF|
- * +---------+
- */
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- debug_matrix = true;
- serial_init();
-
- debug("init\n");
- return;
-}
-
-static void type_key(uint16_t keycode)
-{
- if (keycode == 0) return;
-
- uint8_t mods = keycode>>8;
- uint8_t key = keycode&0xFF;
- if (mods) {
- add_mods(mods);
- send_keyboard_report();
- }
-
- add_key(key);
- send_keyboard_report();
-
- del_key(key);
- send_keyboard_report();
-
- if (mods) {
- del_mods(mods);
- send_keyboard_report();
- }
-}
-static uint16_t code2key(uint8_t code)
-{
- // ASCII to key combination in US laout
- switch (code) {
- case 0x01 ... 0x08: // Ctrl-[a-z]
- return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
- case 0x09: return KC_TAB; // TAB(Ctrl-i)
- case 0x0A ... 0x0C: // Ctrl-[a-z]
- return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
- case 0x0D: return KC_ENTER; // Enter(Ctrl-m)
- case 0x0E ... 0x1A: // Ctrl-[a-z]
- return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
- case 0x1B: return KC_ESC;
- case 0x1C: return KC_RIGHT;
- case 0x1D: return KC_LEFT;
- case 0x1E: return KC_UP;
- case 0x1F: return KC_DOWN;
- case 0x20: return KC_SPACE;
- case 0x21: return MOD_BIT(KC_LSHIFT)<<8 | KC_1; // !
- case 0x22: return MOD_BIT(KC_LSHIFT)<<8 | KC_QUOTE; // "
- case 0x23: return MOD_BIT(KC_LSHIFT)<<8 | KC_3; // #
- case 0x24: return MOD_BIT(KC_LSHIFT)<<8 | KC_4; // $
- case 0x25: return MOD_BIT(KC_LSHIFT)<<8 | KC_5; // %
- case 0x26: return MOD_BIT(KC_LSHIFT)<<8 | KC_7; // &
- case 0x27: return KC_QUOTE; // '
- case 0x28: return MOD_BIT(KC_LSHIFT)<<8 | KC_9; // (
- case 0x29: return MOD_BIT(KC_LSHIFT)<<8 | KC_0; // )
- case 0x2A: return MOD_BIT(KC_LSHIFT)<<8 | KC_8; // *
- case 0x2B: return MOD_BIT(KC_LSHIFT)<<8 | KC_EQUAL; // +
- case 0x2C: return KC_COMMA; // ,
- case 0x2D: return KC_MINUS; // -
- case 0x2E: return KC_DOT; // .
- case 0x2F: return KC_SLASH; // /
- case 0x30: return KC_0;
- case 0x31 ... 0x39: // 1-9
- return KC_1 + (code-0x31);
- case 0x3A: return MOD_BIT(KC_LSHIFT)<<8 | KC_SCLN; // :
- case 0x3B: return KC_SCLN; // ;
- case 0x3C: return MOD_BIT(KC_LSHIFT)<<8 | KC_COMMA; // <
- case 0x3D: return KC_EQUAL; // =
- case 0x3E: return MOD_BIT(KC_LSHIFT)<<8 | KC_DOT; // >
- case 0x3F: return MOD_BIT(KC_LSHIFT)<<8 | KC_SLASH; // ?
- case 0x40: return MOD_BIT(KC_LSHIFT)<<8 | KC_2; // @
- case 0x41 ... 0x5A: // A-Z
- return MOD_BIT(KC_LSHIFT)<<8 | (KC_A + (code-0x41));
- case 0x5B: return KC_LBRACKET; // [
- case 0x5C: return KC_BSLASH; //
- case 0x5D: return KC_RBRACKET; // ]
- case 0x5E: return MOD_BIT(KC_LSHIFT)<<8 | KC_6; // ^
- case 0x5F: return MOD_BIT(KC_LSHIFT)<<8 | KC_MINUS; // _
- case 0x61 ... 0x7A: // a-z
- return KC_A + (code-0x61);
- case 0x7B: return MOD_BIT(KC_LSHIFT)<<8 | KC_LBRACKET; // {
- case 0x7C: return MOD_BIT(KC_LSHIFT)<<8 | KC_BSLASH; // |
- case 0x7D: return MOD_BIT(KC_LSHIFT)<<8 | KC_RBRACKET; // }
- case 0x7E: return MOD_BIT(KC_LSHIFT)<<8 | KC_GRAVE; // }
- case 0x7F: return KC_DELETE; //
- }
- return 0;
-}
-
-uint8_t matrix_scan(void)
-{
- uint16_t code = serial_recv2();
- if (code == -1) {
- return 0;
- }
-
- print_hex8(code); print(" ");
-
- // echo back
- serial_send(code);
- type_key(code2key(code));
-
-
- return code;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
- return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return false;
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return 0;
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < matrix_rows(); row++) {
- phex(row); print(": ");
- pbin_reverse(matrix_get_row(row));
- print("\n");
- }
-}