diff options
Diffstat (limited to 'keyboard/hhkb_rn42/config.h')
| -rw-r--r-- | keyboard/hhkb_rn42/config.h | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/keyboard/hhkb_rn42/config.h b/keyboard/hhkb_rn42/config.h deleted file mode 100644 index 21e73f1c53..0000000000 --- a/keyboard/hhkb_rn42/config.h +++ /dev/null @@ -1,112 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x4242 -#define DEVICE_VER 0x0104 -#define MANUFACTURER t.m.k. -#define PRODUCT HHKB mod -#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod - - -/* matrix size */ -#ifdef HHKB_JP -# define MATRIX_ROWS 16 -#else -# define MATRIX_ROWS 8 -#endif -#define MATRIX_COLS 8 - - -/* key combination for command */ -#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - - -/* period of tapping(ms) */ -#define TAPPING_TERM 300 -/* tap count needed for toggling a feature */ -#define TAPPING_TOGGLE 5 -/* Oneshot timeout(ms) */ -#define ONESHOT_TIMEOUT 300 - -/* Boot Magic salt key: Space */ -#define BOOTMAGIC_KEY_SALT KC_FN6 - -/* power control of key switch board */ -#define HHKB_POWER_SAVING - -/* - * Hardware Serial(UART) - * Baud rate are calculated with round off(+0.5). - */ -#ifdef __AVR_ATmega32U4__ - /* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */ - #define UCSR1D _SFR_MEM8(0xCB) - #define RTSEN 0 - #define CTSEN 1 - - #define SERIAL_UART_BAUD 115200 - #define SERIAL_UART_DATA UDR1 - #define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5)) - #define SERIAL_UART_RXD_VECT USART1_RX_vect - #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) - #define SERIAL_UART_INIT() do { \ - UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ - UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \ - UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ - UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \ - UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \ - UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \ - DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \ - sei(); \ - } while(0) - #define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0) - #define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0) -#else - #error "USART configuration is needed." -#endif - - -/* for debug */ -#define SUART_OUT_PORT PORTD -#define SUART_OUT_BIT 0 -#define SUART_IN_PIN PIND -#define SUART_IN_BIT 1 - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif |