diff options
Diffstat (limited to 'keyboard')
| -rw-r--r-- | keyboard/hhkb/Makefile.tmk | 4 | ||||
| -rw-r--r-- | keyboard/hhkb/doc/Power.txt | 48 | ||||
| -rw-r--r-- | keyboard/hhkb/matrix.c | 31 |
3 files changed, 77 insertions, 6 deletions
diff --git a/keyboard/hhkb/Makefile.tmk b/keyboard/hhkb/Makefile.tmk index 32dd5796f5..d3730081ff 100644 --- a/keyboard/hhkb/Makefile.tmk +++ b/keyboard/hhkb/Makefile.tmk @@ -71,7 +71,7 @@ MCU = atmega32u4 # does not *change* the processor frequency - it should merely be updated to # reflect the processor speed set externally so that the code can use accurate # software delays. -F_CPU = 8000000 +F_CPU = 16000000 # @@ -109,7 +109,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboard/hhkb/doc/Power.txt b/keyboard/hhkb/doc/Power.txt new file mode 100644 index 0000000000..1287053c3c --- /dev/null +++ b/keyboard/hhkb/doc/Power.txt @@ -0,0 +1,48 @@ +HHKB Power consumption +---------------------- + +**Power consumption + board clock/prescaler keyswitch power ctrl current + -------------------------------------------------------------------------- + tmk 16MHz no no 26.4mA + tmk 16MHz pro1 no 45.1mA + tmk 16MHz/2 no no 18.1mA + tmk 16MHz/2 pro1 no 37.3mA + tmk 8MHz no no 18.9mA + tmk 8MHz pro2 no(w/o FET) 32.1mA + tmk 8MHz pro2 no(w FET) 32.1mA withou POWER_ON/FF + tmk 8MHz pro2 no(w FET) 32.6mA with POWR_ON/OFF + tmk 8MHz pro2 15ms(w FET) 21.3mA with POWR_ON/OFF, enumerated but error -32 + tmk 8MHz pro2 60ms(w FET) 13.3mA with POWR_ON/OFF, not enumerated + + gh60 16MHz 25.8mA + gh60 16MHz USB suspend w LED breathing 17.6-29.1mA + gh60 16MHz USB suspend w/o LED 0.2mA(0.231-0.276mA) + Poker 5.6mA + Poker USB suspend 0.3mA(0.301mA) + gh60 16MHz stock firmware by komar 26.8mA + + + HHKB pro2 Over All 139.4mA + HHKB pro2 Controller 115.1mA + HHKB pro1 Controller 25.9mA + + +keyswitch power consumption: +pro1: 45.1-26.4=18.7mA + 37.3-18.1=19.2mA +pro2: 32.1-18.9=13.2mA + + + + + +**Low Freq Crystal or Prescaler? +No advantage of Low Freq Crystal against Prescaled. + +Clock routing +X'tal --+---->Prescaler-------> System Clock + | + +---------------------> USB PLL + +Design Decision: Install 16MHz crystal on board with using clock rescaler. diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c index cf4bf9a7de..d0731ef1f8 100644 --- a/keyboard/hhkb/matrix.c +++ b/keyboard/hhkb/matrix.c @@ -63,7 +63,7 @@ static matrix_row_t _matrix1[MATRIX_ROWS]; PORTE |= (1<<6); \ } while (0) #define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ - (((COL) & 0x07)<<3) | \ + (((COL) & 0x07)<<3) | \ ((ROW) & 0x07)) #define KEY_ENABLE() (PORTB &= ~(1<<6)) #define KEY_UNABLE() (PORTB |= (1<<6)) @@ -79,16 +79,20 @@ static matrix_row_t _matrix1[MATRIX_ROWS]; // col: PB3-5,6 // key: PD7(pull-uped) // prev: PB7 +// power: PD4(L:off/H:on) #define KEY_INIT() do { \ DDRB = 0xFF; \ PORTB = 0x00; \ DDRD &= ~0x80; \ PORTD |= 0x80; \ + /* keyswitch board power on */ \ + DDRD |= (1<<4); \ + PORTD |= (1<<4); \ KEY_UNABLE(); \ KEY_PREV_OFF(); \ } while (0) #define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ - (((COL) & 0x07)<<3) | \ + (((COL) & 0x07)<<3) | \ ((ROW) & 0x07)) #define KEY_ENABLE() (PORTB &= ~(1<<6)) #define KEY_UNABLE() (PORTB |= (1<<6)) @@ -97,6 +101,20 @@ static matrix_row_t _matrix1[MATRIX_ROWS]; #define KEY_PREV_OFF() (PORTB &= ~(1<<7)) #define KEY_POWER_ON() #define KEY_POWER_OFF() +/* +#define KEY_POWER_ON() do { \ + KEY_INIT(); \ + PORTD |= (1<<4); \ + _delay_ms(1); \ +} while (0) +#define KEY_POWER_OFF() do { \ + PORTD &= ~(1<<4); \ + DDRB &= ~0xFF; \ + PORTB &= ~0xFF; \ + DDRB &= ~0x80; \ + PORTB &= ~0x80; \ +} while (0) +*/ #elif defined(__AVR_ATmega328P__) @@ -195,16 +213,21 @@ uint8_t matrix_scan(void) uint8_t last = TIMER_RAW; KEY_ENABLE(); + // Wait for KEY_STATE outputs its value. // 1us was ok on one HHKB, but not worked on another. // no wait doesn't work on Teensy++ with pro(1us works) // no wait does work on tmk PCB(8MHz) with pro2 // 1us wait does work on both of above + // 1us wait doesn't work on tmk(16MHz) + // 5us wait does work on tmk(16MHz) + // 5us wait does work on tmk(16MHz/2) + // 5us wait does work on tmk(8MHz) // 10us wait does work on Teensy++ with pro // 10us wait does work on 328p+iwrap with pro // 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan) - _delay_us(1); -// _delay_us(10); + _delay_us(5); + if (KEY_STATE()) { matrix[row] &= ~(1<<col); } else { |