diff options
Diffstat (limited to 'keyboards/bastardkb/scylla')
23 files changed, 458 insertions, 144 deletions
diff --git a/keyboards/bastardkb/scylla/blackpill/config.h b/keyboards/bastardkb/scylla/blackpill/config.h new file mode 100644 index 0000000000..773ee947d7 --- /dev/null +++ b/keyboards/bastardkb/scylla/blackpill/config.h @@ -0,0 +1,58 @@ +/* + * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) + * Copyright 2021 Stefan Kerkmann (@KarlK90) + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Publicw License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { B15, A2, B8, A8, B9 } +#define MATRIX_COL_PINS \ + { B0, B1, B10, B3, B4, B5 } + +/* Handedness. */ +#define SPLIT_HAND_PIN A3 // High -> left, Low -> right. + +/* RGB settings. */ +#define RGB_DI_PIN A1 +#define WS2812_PWM_DRIVER PWMD2 +#define WS2812_PWM_CHANNEL 2 +#define WS2812_PWM_PAL_MODE 1 +#define WS2812_EXTERNAL_PULLUP +#define WS2812_DMA_STREAM STM32_DMA1_STREAM1 +#define WS2812_DMA_CHANNEL 3 +#define WS2812_PWM_TARGET_PERIOD 800000 + +/* Serial configuration for split keyboard. */ +#define SERIAL_USART_TX_PIN A9 + +/* CRC. */ +#define CRC8_USE_TABLE +#define CRC8_OPTIMIZE_SPEED + +/* SPI config for EEPROM. */ +#define SPI_DRIVER SPID1 +#define SPI_SCK_PIN A5 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN A7 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN A6 +#define SPI_MISO_PAL_MODE 5 + +/* EEPROM config. */ +#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 diff --git a/keyboards/bastardkb/scylla/blackpill/halconf.h b/keyboards/bastardkb/scylla/blackpill/halconf.h new file mode 100644 index 0000000000..0d4b7b5dc5 --- /dev/null +++ b/keyboards/bastardkb/scylla/blackpill/halconf.h @@ -0,0 +1,29 @@ +/* + * Copyright 2020 Nick Brassel (tzarc) + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define HAL_USE_PWM TRUE +#define HAL_USE_SERIAL TRUE +//#define HAL_USE_I2C TRUE +#define HAL_USE_SPI TRUE +#define SPI_USE_WAIT TRUE +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#define HAL_USE_GPT TRUE + +#include_next <halconf.h> diff --git a/keyboards/bastardkb/scylla/blackpill/info.json b/keyboards/bastardkb/scylla/blackpill/info.json new file mode 100644 index 0000000000..587cc2bc04 --- /dev/null +++ b/keyboards/bastardkb/scylla/blackpill/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Scylla Blackpill", + "usb": { + "device_version": "1.0.0", + }, +} diff --git a/keyboards/bastardkb/scylla/blackpill/mcuconf.h b/keyboards/bastardkb/scylla/blackpill/mcuconf.h new file mode 100644 index 0000000000..e7cf3681fd --- /dev/null +++ b/keyboards/bastardkb/scylla/blackpill/mcuconf.h @@ -0,0 +1,61 @@ +/* + * Copyright 2020 Nick Brassel (tzarc) + * Copyright 2021 Stefan Kerkmann (@KarlK90) + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include_next <mcuconf.h> + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 FALSE + +//#undef STM32_I2C_I2C1_RX_DMA_STREAM +//#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +//#undef STM32_I2C_I2C1_TX_DMA_STREAM +//#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) + +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE + +//#undef STM32_PWM_USE_TIM3 +//#define STM32_PWM_USE_TIM3 TRUE + +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE + +//#undef STM32_SPI_SPI1_RX_DMA_STREAM +//#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +//#undef STM32_SPI_SPI1_TX_DMA_STREAM +//#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE + +//#undef STM32_SERIAL_USE_USART2 +//#define STM32_SERIAL_USE_USART2 TRUE + +//#undef STM32_UART_USART2_RX_DMA_STREAM +//#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +//#undef STM32_UART_USART2_TX_DMA_STREAM +//#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + +#undef STM32_GPT_USE_TIM3 +#define STM32_GPT_USE_TIM3 TRUE + +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 5 diff --git a/keyboards/bastardkb/scylla/blackpill/rules.mk b/keyboards/bastardkb/scylla/blackpill/rules.mk new file mode 100644 index 0000000000..cf2041ea1c --- /dev/null +++ b/keyboards/bastardkb/scylla/blackpill/rules.mk @@ -0,0 +1,36 @@ +# MCU name +MCU = STM32F411 +BOARD = BLACKPILL_STM32_F411 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default +RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality +RGB_MATRIX_DRIVER = WS2812 # RGB matrix driver support + +SPLIT_KEYBOARD = yes + +MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint +KEYBOARD_SHARED_EP = yes + +EEPROM_DRIVER = spi +WS2812_DRIVER = pwm +SERIAL_DRIVER = usart + +DEBOUNCE_TYPE = asym_eager_defer_pk diff --git a/keyboards/bastardkb/scylla/config.h b/keyboards/bastardkb/scylla/config.h index d876b5d018..777f99197a 100644 --- a/keyboards/bastardkb/scylla/config.h +++ b/keyboards/bastardkb/scylla/config.h @@ -1,5 +1,6 @@ /* * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,90 +17,30 @@ */ #pragma once + #include "config_common.h" -#define VENDOR_ID 0xA8F8 -#define PRODUCT_ID 0x1829 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Bastard Keyboards -#define PRODUCT Scylla -#define MATRIX_ROWS 10 +/* Key matrix configuration. */ +#define MATRIX_ROWS 10 // Rows are doubled-up. #define MATRIX_COLS 6 + #define DIODE_DIRECTION ROW2COL -#define MATRIX_ROW_PINS { D7, B5, F7, F6, B6 } -#define MATRIX_COL_PINS { B4, E6, C6, B1, B3, B2 } -#define RGB_DI_PIN D2 -#define RGBLED_NUM 58 -#define RGBLED_SPLIT { 29, 29 } -#define RGBLIGHT_LIMIT_VAL 120 -#define RGBLIGHT_ANIMATIONS +/* Set 0 if debouncing isn't needed. */ #define DEBOUNCE 5 -#define SOFT_SERIAL_PIN D0 -#define MASTER_RIGHT -#ifdef RGBLIGHT_ENABLE -# define RGBLED_NUM 58 -# define RGBLED_SPLIT { 29, 29 } -# define RGBLIGHT_LIMIT_VAL 50 -# define RGBLIGHT_ANIMATIONS -#endif +/* RGB settings. */ +#define RGBLED_NUM 58 +#define RGBLED_SPLIT \ + { 29, 29 } -// RGB matrix support +/* RGB matrix support. */ #ifdef RGB_MATRIX_ENABLE # define SPLIT_TRANSPORT_MIRROR -# define DRIVER_LED_TOTAL 58 // Number of LEDs -# define RGB_MATRIX_SPLIT { 29, 29 } +# define DRIVER_LED_TOTAL RGBLED_NUM +# define RGB_MATRIX_SPLIT RGBLED_SPLIT # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 # define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS # define RGB_DISABLE_WHEN_USB_SUSPENDED # define RGB_MATRIX_KEYPRESSES -// RGB Matrix Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects -# define ENABLE_RGB_MATRIX_ALPHAS_MODS -# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_BREATHING -# define ENABLE_RGB_MATRIX_BAND_SAT -# define ENABLE_RGB_MATRIX_BAND_VAL -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define ENABLE_RGB_MATRIX_CYCLE_ALL -# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -# define ENABLE_RGB_MATRIX_DUAL_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define ENABLE_RGB_MATRIX_RAINDROPS -# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define ENABLE_RGB_MATRIX_HUE_BREATHING -# define ENABLE_RGB_MATRIX_HUE_PENDULUM -# define ENABLE_RGB_MATRIX_HUE_WAVE -# define ENABLE_RGB_MATRIX_PIXEL_RAIN -# define ENABLE_RGB_MATRIX_PIXEL_FLOW -# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined -# define ENABLE_RGB_MATRIX_TYPING_HEATMAP -# define ENABLE_RGB_MATRIX_DIGITAL_RAIN -// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define ENABLE_RGB_MATRIX_SPLASH -# define ENABLE_RGB_MATRIX_MULTISPLASH -# define ENABLE_RGB_MATRIX_SOLID_SPLASH -# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/bastardkb/scylla/info.json b/keyboards/bastardkb/scylla/info.json index 104932e471..026b0f742e 100644 --- a/keyboards/bastardkb/scylla/info.json +++ b/keyboards/bastardkb/scylla/info.json @@ -1,7 +1,8 @@ { - "keyboard_name": "The Bastard Keyboard", - "url": "https://bastardkb.com/", - "maintainer": "Quentin Lebastard", + "url": "https://bastardkb.com/scylla", + "usb": { + "pid": "0x1829", + }, "layouts": { "LAYOUT_split_4x6_5": { "layout": [ diff --git a/keyboards/bastardkb/scylla/keymaps/default/keymap.c b/keyboards/bastardkb/scylla/keymaps/default/keymap.c index fe9a834fa2..85781f6631 100644 --- a/keyboards/bastardkb/scylla/keymaps/default/keymap.c +++ b/keyboards/bastardkb/scylla/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -/* +/* * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com> * * This program is free software: you can redistribute it and/or modify @@ -19,42 +19,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_split_4x6_5( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, -//-------------------------------------------------//-----------------------------------------------------------// - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, -//-------------------------------------------------//-----------------------------------------------------------// - KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, -//-------------------------------------------------//-----------------------------------------------------------// - KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, -//-------------------------------------------------//-----------------------------------------------------------// - KC_LCTL, KC_SPC, MO(1), MO(2), KC_ENT, KC_RGUI, - KC_HOME, KC_BSPC, KC_DEL, KC_RALT - ), + [0] = LAYOUT_split_4x6_5(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + //-------------------------------------------------//-----------------------------------------------------------// + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, + //-------------------------------------------------//-----------------------------------------------------------// + KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + //-------------------------------------------------//-----------------------------------------------------------// + KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, + //-------------------------------------------------//-----------------------------------------------------------// + KC_LCTL, KC_SPC, MO(1), MO(2), KC_ENT, KC_RGUI, KC_HOME, KC_BSPC, KC_DEL, KC_RALT), - [1] = LAYOUT_split_4x6_5( - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, -//---------------------------------------------------------//-----------------------------------------------------------// - QK_BOOT, _______, _______, _______, _______, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, _______, KC_PLUS, -//---------------------------------------------------------//-----------------------------------------------------------// - _______, KC_HOME, KC_PGUP, KC_PGDN, KC_END, KC_LPRN, KC_RPRN, KC_P4, KC_P5, KC_P6, KC_MINS, KC_PIPE, -//---------------------------------------------------------//-----------------------------------------------------------// - _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_EQL, KC_UNDS, -//---------------------------------------------------------//-----------------------------------------------------------// - KC_LCTL, KC_HOME, KC_TRNS, KC_TRNS, KC_RALT, KC_RGUI, - KC_SPC, KC_BSPC, KC_RCTL, KC_ENT - ), + [1] = LAYOUT_split_4x6_5(KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, + //---------------------------------------------------------//-----------------------------------------------------------// + QK_BOOT, _______, _______, _______, _______, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, _______, KC_PLUS, + //---------------------------------------------------------//-----------------------------------------------------------// + _______, KC_HOME, KC_PGUP, KC_PGDN, KC_END, KC_LPRN, KC_RPRN, KC_P4, KC_P5, KC_P6, KC_MINS, KC_PIPE, + //---------------------------------------------------------//-----------------------------------------------------------// + _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_EQL, KC_UNDS, + //---------------------------------------------------------//-----------------------------------------------------------// + KC_LCTL, KC_HOME, KC_TRNS, KC_TRNS, KC_RALT, KC_RGUI, KC_SPC, KC_BSPC, KC_RCTL, KC_ENT), - [2] = LAYOUT_split_4x6_5( - KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, -//---------------------------------------------------------//--------------------------------------------------------------// - _______, _______, RGB_RMOD, RGB_TOG, RGB_MOD, KC_LBRC, KC_RBRC, _______, KC_NLCK, KC_INS, KC_SLCK, KC_MUTE, -//---------------------------------------------------------//--------------------------------------------------------------// - _______, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_LPRN, KC_RPRN, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_VOLU, -//---------------------------------------------------------//--------------------------------------------------------------// - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, -//---------------------------------------------------------//--------------------------------------------------------------// - KC_LCTL, KC_HOME, KC_TRNS, KC_TRNS, KC_RALT, QK_BOOT, - KC_SPC, KC_BSPC, KC_RCTL, KC_ENT - ), + [2] = LAYOUT_split_4x6_5(KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + //---------------------------------------------------------//--------------------------------------------------------------// + _______, _______, RGB_RMOD, RGB_TOG, RGB_MOD, KC_LBRC, KC_RBRC, _______, KC_NLCK, KC_INS, KC_SLCK, KC_MUTE, + //---------------------------------------------------------//--------------------------------------------------------------// + _______, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_LPRN, KC_RPRN, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_VOLU, + //---------------------------------------------------------//--------------------------------------------------------------// + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, + //---------------------------------------------------------//--------------------------------------------------------------// + KC_LCTL, KC_HOME, KC_TRNS, KC_TRNS, KC_RALT, QK_BOOT, KC_SPC, KC_BSPC, KC_RCTL, KC_ENT), }; diff --git a/keyboards/bastardkb/scylla/keymaps/german_gaming/keymap.c b/keyboards/bastardkb/scylla/keymaps/german_gaming/keymap.c index 94dd182c69..f4f8cfd1da 100644 --- a/keyboards/bastardkb/scylla/keymaps/german_gaming/keymap.c +++ b/keyboards/bastardkb/scylla/keymaps/german_gaming/keymap.c @@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_PLUS, KC_PIPE, KC_UNDS, _______, _______, KC_P0 , KC_P1 , KC_P2 , KC_P3 , KC_PENT, KC_KP_EQUAL, _______, KC_RGHT, _______, _______, _______, _______, - KC_LEFT, _______, RESET , _______ + KC_LEFT, _______, QK_BOOT, _______ ), [_RAISE] = LAYOUT_split_4x6_5( @@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_split_4x6_5( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, RESET , _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, DF(_GAME), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, DF(_BASE), _______, _______, _______, _______, _______, _______, diff --git a/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h b/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h index 09433f3f40..5a3153ae37 100644 --- a/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. diff --git a/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c index 7c5717a0fe..dbab7f9820 100644 --- a/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,4 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. diff --git a/keyboards/bastardkb/scylla/keymaps/xyverz/keymap.c b/keyboards/bastardkb/scylla/keymaps/xyverz/keymap.c index b8f70bdc9b..b1f45951b7 100644 --- a/keyboards/bastardkb/scylla/keymaps/xyverz/keymap.c +++ b/keyboards/bastardkb/scylla/keymaps/xyverz/keymap.c @@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = LAYOUT_split_4x6_5( KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, - RESET, _______, _______, KC_UP, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, + QK_BOOT, _______, _______, KC_UP, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, KC_PGUP, _______, KC_PLUS, KC_LCBR, KC_RCBR, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_END, KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, KC_DEL, _______, _______, _______, _______, @@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RAISE] = LAYOUT_split_4x6_5( KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, - _______, _______, _______, KC_UP, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, RESET, + _______, _______, _______, KC_UP, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, QK_BOOT, KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, KC_PGUP, _______, KC_EQL, KC_LBRC, KC_RBRC, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_END, KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, KC_DEL, _______, _______, _______, _______, @@ -74,7 +74,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_split_4x6_5( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, WINDOWS, MAC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/bastardkb/scylla/readme.md b/keyboards/bastardkb/scylla/readme.md index 70df5cfbb9..5a83083b96 100644 --- a/keyboards/bastardkb/scylla/readme.md +++ b/keyboards/bastardkb/scylla/readme.md @@ -17,6 +17,6 @@ See the [keyboard build instructions](https://docs.bastardkb.com) ## Important information regarding the reset -If you modify this firmware, make sure to always have a RESET key that can be triggered using only the master side ! This way you ensure that you can always flash the keyboard, even if you mess up. +If you modify this firmware, make sure to always have a `QK_BOOT` key that can be triggered using only the master side ! This way you ensure that you can always flash the keyboard, even if you mess up. Otherwise if you're stuck, open the case and reset manually by shorting Gnd and Rst, or pressing the RST button. diff --git a/keyboards/bastardkb/scylla/scylla.h b/keyboards/bastardkb/scylla/scylla.h index 196982952f..4039ad3a94 100644 --- a/keyboards/bastardkb/scylla/scylla.h +++ b/keyboards/bastardkb/scylla/scylla.h @@ -1,5 +1,6 @@ -/* +/* * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,28 +16,29 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ - #pragma once + #include "quantum.h" -// SWITCHED 91 and 95 - check on left ? -#define LAYOUT_split_4x6_5( \ - k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \ - k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \ - k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \ - k30, k31, k32, k33, k34, k35, k85, k84, k83, k82, k81, k80, \ - k43, k44, k41, k91, k94, k93, \ - k45, k42, k92, k95 \ -)\ -{\ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 }, \ - { KC_NO, k41, k42, k43, k44, k45 }, \ - { k50, k51, k52, k53, k54, k55 }, \ - { k60, k61, k62, k63, k64, k65 }, \ - { k70, k71, k72, k73, k74, k75 }, \ - { k80, k81, k82, k83, k84, k85 }, \ - { KC_NO, k91, k92, k93, k94, k95 }, \ +// clang-format off +#define LAYOUT_split_4x6_5( \ + k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \ + k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \ + k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \ + k30, k31, k32, k33, k34, k35, k85, k84, k83, k82, k81, k80, \ + k43, k44, k41, k91, k94, k93, \ + k45, k42, k92, k95 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 }, \ + { KC_NO, k41, k42, k43, k44, k45 }, \ + { k50, k51, k52, k53, k54, k55 }, \ + { k60, k61, k62, k63, k64, k65 }, \ + { k70, k71, k72, k73, k74, k75 }, \ + { k80, k81, k82, k83, k84, k85 }, \ + { KC_NO, k91, k92, k93, k94, k95 }, \ } +// clang-format on diff --git a/keyboards/bastardkb/scylla/v1/elitec/config.h b/keyboards/bastardkb/scylla/v1/elitec/config.h new file mode 100644 index 0000000000..0990e6d068 --- /dev/null +++ b/keyboards/bastardkb/scylla/v1/elitec/config.h @@ -0,0 +1,34 @@ +/* + * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { D7, B5, F7, F6, B6 } +#define MATRIX_COL_PINS \ + { B4, E6, C6, B1, B3, B2 } + +/* Handedness. */ +#define MASTER_RIGHT + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN D0 + +/* RGB settings. */ +#define RGB_DI_PIN D2 diff --git a/keyboards/bastardkb/scylla/v1/elitec/info.json b/keyboards/bastardkb/scylla/v1/elitec/info.json new file mode 100644 index 0000000000..57b36e1e2a --- /dev/null +++ b/keyboards/bastardkb/scylla/v1/elitec/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Scylla Elite-C", + "usb": { + "device_version": "1.0.0", + }, +} diff --git a/keyboards/bastardkb/scylla/rules.mk b/keyboards/bastardkb/scylla/v1/elitec/rules.mk index fe2991040d..0c131a2eaf 100644 --- a/keyboards/bastardkb/scylla/rules.mk +++ b/keyboards/bastardkb/scylla/v1/elitec/rules.mk @@ -15,8 +15,12 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix (do not use together with RGBLIGHT_ENABLE) RGB_MATRIX_DRIVER = WS2812 # RGB matrix driver support -AUDIO_ENABLE = no # Audio output + SPLIT_KEYBOARD = yes -LTO_ENABLE = yes diff --git a/keyboards/bastardkb/scylla/v2/elitec/config.h b/keyboards/bastardkb/scylla/v2/elitec/config.h new file mode 100644 index 0000000000..698f6e426f --- /dev/null +++ b/keyboards/bastardkb/scylla/v2/elitec/config.h @@ -0,0 +1,33 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { F4, F7, C6, D4, B5 } +#define MATRIX_COL_PINS \ + { F6, F5, B6, D7, E6, B4 } + +/* Handedness. */ +#define MASTER_RIGHT + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN D2 + +/* RGB settings. */ +#define RGB_DI_PIN D3 diff --git a/keyboards/bastardkb/scylla/v2/elitec/info.json b/keyboards/bastardkb/scylla/v2/elitec/info.json new file mode 100644 index 0000000000..213bb9a79c --- /dev/null +++ b/keyboards/bastardkb/scylla/v2/elitec/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Scylla Elite-C", + "usb": { + "device_version": "2.0.0", + }, +} diff --git a/keyboards/bastardkb/scylla/v2/elitec/rules.mk b/keyboards/bastardkb/scylla/v2/elitec/rules.mk new file mode 100644 index 0000000000..0c131a2eaf --- /dev/null +++ b/keyboards/bastardkb/scylla/v2/elitec/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default +RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix (do not use together with RGBLIGHT_ENABLE) +RGB_MATRIX_DRIVER = WS2812 # RGB matrix driver support + +SPLIT_KEYBOARD = yes diff --git a/keyboards/bastardkb/scylla/v2/splinky/config.h b/keyboards/bastardkb/scylla/v2/splinky/config.h new file mode 100644 index 0000000000..5f678fb331 --- /dev/null +++ b/keyboards/bastardkb/scylla/v2/splinky/config.h @@ -0,0 +1,43 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { GP29, GP26, GP5, GP4, GP9 } +#define MATRIX_COL_PINS \ + { GP27, GP28, GP15, GP6, GP7, GP8 } + +/* Handedness. */ +#define MASTER_RIGHT + +// To use the handedness pin, resistors need to be installed on the adapter PCB. +// If so, uncomment the following code, and undefine MASTER_RIGHT above. +// #define SPLIT_HAND_PIN GP13 +// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left. + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN GP1 + +/* RGB settings. */ +#define RGB_DI_PIN GP0 + +/* Reset. */ +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17 +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U diff --git a/keyboards/bastardkb/scylla/v2/splinky/info.json b/keyboards/bastardkb/scylla/v2/splinky/info.json new file mode 100644 index 0000000000..614e22eefa --- /dev/null +++ b/keyboards/bastardkb/scylla/v2/splinky/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Scylla Splinky", + "usb": { + "device_version": "2.0.0", + }, +} diff --git a/keyboards/bastardkb/scylla/v2/splinky/rules.mk b/keyboards/bastardkb/scylla/v2/splinky/rules.mk new file mode 100644 index 0000000000..8dfc0256ab --- /dev/null +++ b/keyboards/bastardkb/scylla/v2/splinky/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = RP2040 + +# Bootloader selection +BOOTLOADER = rp2040 + +# RP2040-specific options +ALLOW_WARNINGS = yes +PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS. + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default +RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality +RGB_MATRIX_DRIVER = WS2812 + +SPLIT_KEYBOARD = yes + +SERIAL_DRIVER = vendor +WS2812_DRIVER = vendor |