diff options
Diffstat (limited to 'keyboards/capsunlocked')
28 files changed, 1052 insertions, 2 deletions
diff --git a/keyboards/capsunlocked/cu24/config.h b/keyboards/capsunlocked/cu24/config.h new file mode 100644 index 0000000000..a2a4e727ff --- /dev/null +++ b/keyboards/capsunlocked/cu24/config.h @@ -0,0 +1,112 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Yiancar/CapsUnlocked +#define PRODUCT CU24 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { E6, F5, B4, B6, C6, C7 } +#define MATRIX_COL_PINS { F0, F1, D0, D1 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Backlight */ +#define BACKLIGHT_PIN B5 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 + +/* RGB Glow */ +#define RGB_DI_PIN F4 // The pin the LED strip is connected to +#define RGBLED_NUM 5 // Number of LEDs in your strip +#define RGBLIGHT_ANIMATIONS + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/capsunlocked/cu24/cu24.c b/keyboards/capsunlocked/cu24/cu24.c new file mode 100644 index 0000000000..0c976f076f --- /dev/null +++ b/keyboards/capsunlocked/cu24/cu24.c @@ -0,0 +1,16 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "cu24.h" diff --git a/keyboards/capsunlocked/cu24/cu24.h b/keyboards/capsunlocked/cu24/cu24.h new file mode 100644 index 0000000000..8e3daa4758 --- /dev/null +++ b/keyboards/capsunlocked/cu24/cu24.h @@ -0,0 +1,57 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define LAYOUT_grid( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, k33, \ + k40, k41, k42, k43, \ + k50, k51, k52, k53 \ +) { \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, k23 }, \ + { k30, k31, k32, k33 }, \ + { k40, k41, k42, k43 }, \ + { k50, k51, k52, k53 } \ +} + +#define LAYOUT_numpad( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, \ + k40, k41, k42, k43, \ + k51, k52 \ +) { \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, k23 }, \ + { k30, k31, k32, XXX }, \ + { k40, k41, k42, k43 }, \ + { XXX, k51, k52, XXX } \ +} diff --git a/keyboards/capsunlocked/cu24/info.json b/keyboards/capsunlocked/cu24/info.json new file mode 100644 index 0000000000..532bc13bee --- /dev/null +++ b/keyboards/capsunlocked/cu24/info.json @@ -0,0 +1,14 @@ +{ + "keyboard_name": "cu24", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT_grid": { + "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"x":3, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3}, {"label":"0", "x":0, "y":4}, {"x":1, "y":4}, {"label":".", "x":2, "y":4}, {"x":3, "y":4}, {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}] + }, + + "LAYOUT_numpad": { + "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"x":3, "y":2, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4}, {"x":1, "y":4}, {"label":".", "x":2, "y":4}, {"x":3, "y":4, "h":2}, {"x":0, "y":5, "w":2}, {"x":2, "y":5}] + } + } +} diff --git a/keyboards/capsunlocked/cu24/keymaps/default/keymap.c b/keyboards/capsunlocked/cu24/keymaps/default/keymap.c new file mode 100644 index 0000000000..aa2d834dfa --- /dev/null +++ b/keyboards/capsunlocked/cu24/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_grid( /* Base */ + KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, + MO(1) , KC_PSLS, KC_PAST, KC_PMNS, + KC_P7 , KC_P8 , KC_P9 , KC_PPLS, + KC_P4 , KC_P5 , KC_P6 , KC_PPLS, + KC_P1 , KC_P2 , KC_P3 , KC_PENT, + KC_P0 , KC_P0 , KC_PDOT, KC_PENT +), + +[1] = LAYOUT_grid( /* FN */ + RGB_TOG, RGB_MOD, BL_STEP, BL_BRTG, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, + RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET , KC_TRNS +), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} diff --git a/keyboards/capsunlocked/cu24/keymaps/default/readme.md b/keyboards/capsunlocked/cu24/keymaps/default/readme.md new file mode 100644 index 0000000000..5528d6c0d8 --- /dev/null +++ b/keyboards/capsunlocked/cu24/keymaps/default/readme.md @@ -0,0 +1,10 @@ +https://imgur.com/a/vpHFj + + + +# Default CU24 Layout + +This is the default layout that comes flashed on every CU24. It is like a normal numpad, +with all the led customization on the Fn layer. + +See [All Layouts](https://imgur.com/trwO7dN) for all supported configurations!
\ No newline at end of file diff --git a/keyboards/capsunlocked/cu24/readme.md b/keyboards/capsunlocked/cu24/readme.md new file mode 100644 index 0000000000..250ff8847f --- /dev/null +++ b/keyboards/capsunlocked/cu24/readme.md @@ -0,0 +1,15 @@ +# CU24 + + + +A luxurious 24 key keypad with various layouts. Includes RGB underglow, backlight and an aluminium, brass and nylon case. + +Keyboard Maintainer: [Yiancar](https://github.com/yiancar) +Hardware Supported: PCB v1.0 (uses a 32u4) +Hardware Availability: [caps-unlocked.com](http://caps-unlocked.com/) + +Make example for this keyboard (after setting up your build environment): + + make capsunlocked/cu24:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/capsunlocked/cu24/rules.mk b/keyboards/capsunlocked/cu24/rules.mk new file mode 100644 index 0000000000..87e6fffce0 --- /dev/null +++ b/keyboards/capsunlocked/cu24/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Enable N-Key Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = yes # RGB drivers diff --git a/keyboards/capsunlocked/cu75/config.h b/keyboards/capsunlocked/cu75/config.h new file mode 100644 index 0000000000..cfcb08cce1 --- /dev/null +++ b/keyboards/capsunlocked/cu75/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6062 +#define DEVICE_VER 0x0001 +#define MANUFACTURER LFKeyboards/CapsUnlocked +#define PRODUCT CU75 + +#define DIODE_DIRECTION COL2ROW +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 +#define MATRIX_ROW_PINS {F1, B7, B3, D2, D3, B2} +#define MATRIX_COL_PINS {F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, B1, B0, F0} +#define UNUSED_PINS {} + +#define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile +#define RGBLED_NUM 24 // Number of LEDs +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 8 +#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/capsunlocked/cu75/cu75.c b/keyboards/capsunlocked/cu75/cu75.c new file mode 100644 index 0000000000..e52edd90fa --- /dev/null +++ b/keyboards/capsunlocked/cu75/cu75.c @@ -0,0 +1,116 @@ +#include <avr/sfr_defs.h> +#include <avr/timer_avr.h> +#include <avr/wdt.h> +#include "cu75.h" +#include "keymap.h" +#include "debug.h" +#include "../lfkeyboards/issi.h" +#include "../lfkeyboards/TWIlib.h" +#include "../lfkeyboards/lighting.h" + +#ifdef AUDIO_ENABLE +float test_sound[][2] = SONG(STARTUP_SOUND); +#include "audio.h" +#endif + +uint16_t click_hz = CLICK_HZ; +uint16_t click_time = CLICK_MS; +uint8_t click_toggle = CLICK_ENABLED; + + +void matrix_init_kb(void) +{ + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + +#ifdef AUDIO_ENABLE + audio_init(); + PLAY_SONG(test_sound); + // Fix port B5 + setPinInput(B5); + writePinHigh(B5); +#else + // If we're not using the audio pin, drive it low + setPinOutput(C6); + writePinLow(C6); +#endif +#ifdef ISSI_ENABLE + issi_init(); +#endif +} + +void matrix_scan_kb(void) +{ +#ifdef WATCHDOG_ENABLE + wdt_reset(); +#endif +#ifdef ISSI_ENABLE + // switch/underglow lighting update + static uint32_t issi_device = 0; + static uint32_t twi_last_ready = 0; + if(twi_last_ready > 1000){ + // Its been way too long since the last ISSI update, reset the I2C bus and start again + dprintf("TWI failed to recover, TWI re-init\n"); + twi_last_ready = 0; + TWIInit(); + force_issi_refresh(); + } + if(isTWIReady()){ + twi_last_ready = 0; + // If the i2c bus is available, kick off the issi update, alternate between devices + update_issi(issi_device, issi_device); + if(issi_device){ + issi_device = 0; + }else{ + issi_device = 3; + } + }else{ + twi_last_ready++; + } +#endif + matrix_scan_user(); +} + +void click(uint16_t freq, uint16_t duration){ +#ifdef AUDIO_ENABLE + if(freq >= 100 && freq <= 20000 && duration < 100){ + play_note(freq, 10); + for (uint16_t i = 0; i < duration; i++){ + _delay_ms(1); + } + stop_all_notes(); + } +#endif +} + +bool process_record_kb(uint16_t keycode, keyrecord_t* record) +{ + // Test code that turns on the switch led for the key that is pressed + // set_backlight_by_keymap(record->event.key.col, record->event.key.row); + if (click_toggle && record->event.pressed){ + click(click_hz, click_time); + } + if (keycode == RESET) { + reset_keyboard_kb(); + } else { + } + return process_record_user(keycode, record); +} + +void reset_keyboard_kb(){ +#ifdef WATCHDOG_ENABLE + MCUSR = 0; + wdt_disable(); + wdt_reset(); +#endif + reset_keyboard(); +} + +// LFK lighting info +const uint8_t switch_matrices[] = {0, 1}; +const uint8_t rgb_matrices[] = {6, 7}; +const uint8_t rgb_sequence[] = { + 24, 23, 22, 21, 20, 19, 18, 17, 1, 2, 3, 4, 5, + 6, 7, 8, 10, 11, 12, 13, 14, 15, 16, 9 +}; diff --git a/keyboards/capsunlocked/cu75/cu75.h b/keyboards/capsunlocked/cu75/cu75.h new file mode 100644 index 0000000000..11a01b8b7e --- /dev/null +++ b/keyboards/capsunlocked/cu75/cu75.h @@ -0,0 +1,96 @@ +#pragma once + +#include "quantum.h" +#include "matrix.h" +#include <avr/sfr_defs.h> + +typedef struct RGB_Color { + uint16_t red; + uint16_t green; + uint16_t blue; +} RGB_Color; + +typedef struct Layer_Info { + uint32_t layer; + uint32_t mask; + RGB_Color color; +} Layer_Info; + +extern const uint32_t layer_count; +extern const Layer_Info layer_info[]; + +#define CLICK_HZ 500 +#define CLICK_MS 2 +#define CLICK_ENABLED 0 + +void reset_keyboard_kb(void); +void click(uint16_t freq, uint16_t duration); + +#define XXX KC_NO + +/* Vanilla Keymap */ +// This a shortcut to help you visually see your layout. +/* +* ,-------------------------------------------------------------------------------. +* | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 0B | 0C | 0D | 0E | 0F | +* |-------------------------------------------------------------------------------| +* | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D | 1F | +* |-------------------------------------------------------------------------------| +* | 20 | 21 |22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D | 2E | +* |-------------------------------------------------------------------------------| +* | 30 | 31 |32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C | 3E | +* |-------------------------------------------------------------------------------| +* | 40 | 42 |43 | 44 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C | 4D | 4E | +* |-------------------------------------------------------------------------------| +* | 50 | 51 | 52 | 53 | 56 | 58 | 59 | 5A | 5B | 5C | 5D | 5E | +* `-------------------------------------------------------------------------------' +*/ +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3E, \ + k40, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, \ + k50, k51, k52, k53, k56, k58, k59, k5A, k5B, k5C, k5D, k5E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, XXX, k3E, XXX }, \ + { k40, XXX, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, XXX }, \ + { k50, k51, k52, k53, XXX, XXX, k56, XXX, k58, k59, k5A, k5B, k5C, k5D, k5E, XXX } \ +} + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, \ + k50, k51, k52, k53, k56, k58, k59, k5A, k5B, k5C, k5D, k5E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, XXX }, \ + { k50, k51, k52, k53, XXX, XXX, k56, XXX, k58, k59, k5A, k5B, k5C, k5D, k5E, XXX } \ +} + +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3E, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, \ + k50, k51, k52, k53, k56, k58, k59, k5A, k5B, k5C, k5D, k5E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, XXX, k3E, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, XXX }, \ + { k50, k51, k52, k53, XXX, XXX, k56, XXX, k58, k59, k5A, k5B, k5C, k5D, k5E, XXX } \ +} diff --git a/keyboards/capsunlocked/cu75/info.json b/keyboards/capsunlocked/cu75/info.json new file mode 100644 index 0000000000..07812ddb58 --- /dev/null +++ b/keyboards/capsunlocked/cu75/info.json @@ -0,0 +1,18 @@ +{ + "keyboard_name": "cu75", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":2.75}, {"x":6.5, "y":5}, {"x":7.5, "y":5, "w":2.5}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] + }, + + "LAYOUT_all": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"x":12.75, "y":3}, {"label":"Enter", "x":13.75, "y":3, "w":1.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":2.75}, {"x":6.5, "y":5}, {"x":7.5, "y":5, "w":2.5}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] + }, + + "LAYOUT_iso": { + "layout": [{"label":"k01", "x":0, "y":0}, {"label":"k02", "x":1, "y":0}, {"label":"k03", "x":2, "y":0}, {"label":"k04", "x":3, "y":0}, {"label":"k05", "x":4, "y":0}, {"label":"k06", "x":5, "y":0}, {"label":"k07", "x":6, "y":0}, {"label":"k08", "x":7, "y":0}, {"label":"k09", "x":8, "y":0}, {"label":"k0A", "x":9, "y":0}, {"label":"k0B", "x":10, "y":0}, {"label":"k0C", "x":11, "y":0}, {"label":"k0D", "x":12, "y":0}, {"label":"k0E", "x":13, "y":0}, {"label":"k0F", "x":14, "y":0}, {"label":"k0G", "x":15, "y":0}, {"label":"k11", "x":0, "y":1}, {"label":"k12", "x":1, "y":1}, {"label":"k13", "x":2, "y":1}, {"label":"k14", "x":3, "y":1}, {"label":"k15", "x":4, "y":1}, {"label":"k16", "x":5, "y":1}, {"label":"k17", "x":6, "y":1}, {"label":"k18", "x":7, "y":1}, {"label":"k19", "x":8, "y":1}, {"label":"k1A", "x":9, "y":1}, {"label":"k1B", "x":10, "y":1}, {"label":"k1C", "x":11, "y":1}, {"label":"k1D", "x":12, "y":1}, {"label":"k1E", "x":13, "y":1, "w":2}, {"label":"k1G", "x":15, "y":1}, {"label":"k21", "x":0, "y":2, "w":1.5}, {"label":"k22", "x":1.5, "y":2}, {"label":"k23", "x":2.5, "y":2}, {"label":"k24", "x":3.5, "y":2}, {"label":"k25", "x":4.5, "y":2}, {"label":"k26", "x":5.5, "y":2}, {"label":"k27", "x":6.5, "y":2}, {"label":"k28", "x":7.5, "y":2}, {"label":"k29", "x":8.5, "y":2}, {"label":"k2A", "x":9.5, "y":2}, {"label":"k2B", "x":10.5, "y":2}, {"label":"k2C", "x":11.5, "y":2}, {"label":"k2D", "x":12.5, "y":2}, {"label":"k2E", "x":13.75, "y":2, "w":1.25, "h":2}, {"label":"k2F", "x":15, "y":2}, {"label":"k31", "x":0, "y":3, "w":1.75}, {"label":"k32", "x":1.75, "y":3}, {"label":"k33", "x":2.75, "y":3}, {"label":"k34", "x":3.75, "y":3}, {"label":"k35", "x":4.75, "y":3}, {"label":"k36", "x":5.75, "y":3}, {"label":"k37", "x":6.75, "y":3}, {"label":"k38", "x":7.75, "y":3}, {"label":"k39", "x":8.75, "y":3}, {"label":"k3A", "x":9.75, "y":3}, {"label":"k3B", "x":10.75, "y":3}, {"label":"k3C", "x":11.75, "y":3}, {"label":"k3D", "x":12.75, "y":3}, {"label":"k3F", "x":15, "y":3}, {"label":"k41", "x":0, "y":4, "w":1.25}, {"label":"k42", "x":1.25, "y":4}, {"label":"k43", "x":2.25, "y":4}, {"label":"k44", "x":3.25, "y":4}, {"label":"k45", "x":4.25, "y":4}, {"label":"k46", "x":5.25, "y":4}, {"label":"k47", "x":6.25, "y":4}, {"label":"k48", "x":7.25, "y":4}, {"label":"k49", "x":8.25, "y":4}, {"label":"k4A", "x":9.25, "y":4}, {"label":"k4B", "x":10.25, "y":4}, {"label":"k4C", "x":11.25, "y":4}, {"label":"k4D", "x":12.25, "y":4, "w":1.75}, {"label":"k4E", "x":14, "y":4}, {"label":"k4F", "x":15, "y":4}, {"label":"k51", "x":0, "y":5, "w":1.25}, {"label":"k52", "x":1.25, "y":5, "w":1.25}, {"label":"k53", "x":2.5, "y":5, "w":1.25}, {"label":"k54", "x":3.75, "y":5, "w":2.25}, {"label":"k57", "x":6, "y":5, "w":1.25}, {"label":"k59", "x":7.25, "y":5, "w":2.75}, {"label":"k5A", "x":10, "y":5}, {"label":"k5B", "x":11, "y":5}, {"label":"k5C", "x":12, "y":5}, {"label":"k5D", "x":13, "y":5}, {"label":"k5E", "x":14, "y":5}, {"label":"k5F", "x":15, "y":5}] + } + } +} diff --git a/keyboards/capsunlocked/cu75/keymaps/default/keymap.c b/keyboards/capsunlocked/cu75/keymaps/default/keymap.c new file mode 100644 index 0000000000..b1e3e9f97a --- /dev/null +++ b/keyboards/capsunlocked/cu75/keymaps/default/keymap.c @@ -0,0 +1,59 @@ +#include QMK_KEYBOARD_H + +enum keymap_layout { + VANILLA = 0, + FUNC, + SETTINGS, +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap VANILLA: (Base Layer) Default Layer + * ,------------------------------------------------------------.----. + * |Esc | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|F13|F14| F15| + * |------------------------------------------------------------|----| + * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backspa| Ins| + * |------------------------------------------------------------|----| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| Del| + * |------------------------------------------------------------|----| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp| + * |------------------------------------------------------------|----| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgDn| + * |-----------------------------------------------------------------| + * |Ctrl|Win |Alt |Space| Space |Space|Alt |Ctrl|Func|Lft| Dn |Rig | + * `-----------------------------------------------------------------' + */ + [VANILLA] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT + + ), + + /* Keymap VANILLA: Function Layer + * ,-------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | + * |-------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | + * |-------------------------------------------------------------------| + * | | | | | | | | | | | | | | | RGB_TOG| + * |-------------------------------------------------------------------| + * | | | | | | | | | | | | |RESET |RGB_MODE| + * |-------------------------------------------------------------------| + * | | | | | | | | | |VAD|VAI| |RGB_HUI| | + * |-------------------------------------------------------------------| + * | | | | | | | |RGB_SAD|RGB_HUD|RGB_SAI| + * `-------------------------------------------------------------------' + */ + [FUNC] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_MOD, + _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______, _______, RGB_HUI, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI + ), +}; diff --git a/keyboards/capsunlocked/cu75/keymaps/default/rules.mk b/keyboards/capsunlocked/cu75/keymaps/default/rules.mk new file mode 100644 index 0000000000..bbd4c8c9fd --- /dev/null +++ b/keyboards/capsunlocked/cu75/keymaps/default/rules.mk @@ -0,0 +1,40 @@ +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes +BACKLIGHT_ENABLE = yes # Disable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = yes # Disable RGB underlight +RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 +SLEEP_LED_ENABLE = yes + +ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled +WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms + + +ifeq ($(strip $(ISSI_ENABLE)), yes) + TMK_COMMON_DEFS += -DISSI_ENABLE +endif + +ifeq ($(strip $(WATCHDOG_ENABLE)), yes) + TMK_COMMON_DEFS += -DWATCHDOG_ENABLE +endif + + +# # Set the LFK78 hardware version. This is defined in rules.mk, but can be overidden here if desired +# # +# # RevB - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight +# # RevC/D - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB +# # +# # Set to B, C or D +# LFK_REV = D + +# ifeq ($(LFK_REV), B) +# MCU = atmega32u4 +# else +# MCU = at90usb1286 +# endif +# OPT_DEFS += -DLFK_REV_$(LFK_REV) +# OPT_DEFS += -DUSB_PRODUCT=\"LFK_Rev$(LFK_REV)\" diff --git a/keyboards/capsunlocked/cu75/keymaps/iso/keymap.c b/keyboards/capsunlocked/cu75/keymaps/iso/keymap.c new file mode 100644 index 0000000000..ce7d51eed0 --- /dev/null +++ b/keyboards/capsunlocked/cu75/keymaps/iso/keymap.c @@ -0,0 +1,58 @@ +#include QMK_KEYBOARD_H + +enum keymap_layout { + VANILLA = 0, + FUNC, + SETTINGS, +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap VANILLA: (Base Layer) Default Layer + * ,------------------------------------------------------------.----. + * |Esc | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|F13|F14| F15| + * |------------------------------------------------------------|----| + * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backspa| Ins| + * |------------------------------------------------------------|----| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Ret | Del| + * |--------------------------------------------------------. |----| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| # | |PgUp| + * |------------------------------------------------------------|----| + * |Shft| \ | Z| X| C| V| B| N| M| ,| .| /|Shift | Up |PgDn| + * |-----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt |Ctrl|Func|Lft| Dn |Rig | + * `-----------------------------------------------------------------' + */ + [VANILLA] = LAYOUT_iso( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* Keymap VANILLA: Function Layer + * ,-----------------------------------------------------------.---. + * | | | | | | | | | | | | | | | | | + * |---------------------------------------------------------------| + * | | | | | | | | | | | | | | | | + * |---------------------------------------------------------------| + * | | | | | | | | | | | | | | |TOG| + * |------------------------------------------------------. |---| + * | | | | | | | | | | | | |RST| |MOD| + * |---------------------------------------------------------------| + * | | | | | | | | | |VAD|VAI| | |HUI| | + * |---------------------------------------------------------------| + * | | | | | | | |SAD|HUD|SAI| + * `---------------------------------------------------------------' + */ + [FUNC] = LAYOUT_iso( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_MOD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______, _______, RGB_HUI, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI + ), +}; diff --git a/keyboards/capsunlocked/cu75/keymaps/iso/rules.mk b/keyboards/capsunlocked/cu75/keymaps/iso/rules.mk new file mode 100644 index 0000000000..be27fed69c --- /dev/null +++ b/keyboards/capsunlocked/cu75/keymaps/iso/rules.mk @@ -0,0 +1,40 @@ +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes +# BACKLIGHT_ENABLE = no # Disable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = no # Disable RGB underlight +RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 +SLEEP_LED_ENABLE = yes + +ISSI_ENABLE = no # If the I2C pullup resistors aren't install this must be disabled +WATCHDOG_ENABLE = yes # Resets keyboard if matrix_scan isn't run every 250ms + + +ifeq ($(strip $(ISSI_ENABLE)), yes) + TMK_COMMON_DEFS += -DISSI_ENABLE +endif + +ifeq ($(strip $(WATCHDOG_ENABLE)), yes) + TMK_COMMON_DEFS += -DWATCHDOG_ENABLE +endif + + +# # Set the LFK78 hardware version. This is defined in rules.mk, but can be overidden here if desired +# # +# # RevB - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight +# # RevC/D - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB +# # +# # Set to B, C or D +# LFK_REV = D + +# ifeq ($(LFK_REV), B) +# MCU = atmega32u4 +# else +# MCU = at90usb1286 +# endif +# OPT_DEFS += -DLFK_REV_$(LFK_REV) +# OPT_DEFS += -DUSB_PRODUCT=\"LFK_Rev$(LFK_REV)\" diff --git a/keyboards/capsunlocked/cu75/readme.md b/keyboards/capsunlocked/cu75/readme.md new file mode 100644 index 0000000000..78882b2573 --- /dev/null +++ b/keyboards/capsunlocked/cu75/readme.md @@ -0,0 +1,17 @@ +# CU75 + + + +A luxurious 75% keyboard with various layouts. Includes RGB underglow, backlight and an aluminium, brass and nylon case. + +Keyboard Maintainer: [Yiancar](https://github.com/yiancar) and [LFKeyboards](https://github.com/lfkeyboards) +Hardware Supported: PCB v1.0 (uses a 32u4) +Hardware Availability: [caps-unlocked.com](http://caps-unlocked.com/) + +This PCB uses lighting libraries from LFKeyboards + +Make example for this keyboard (after setting up your build environment): + + make capsunlocked/cu75:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/capsunlocked/cu75/rules.mk b/keyboards/capsunlocked/cu75/rules.mk new file mode 100644 index 0000000000..6274267ab1 --- /dev/null +++ b/keyboards/capsunlocked/cu75/rules.mk @@ -0,0 +1,12 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BACKLIGHT_DRIVER = custom + +SRC = ../lfkeyboards/TWIlib.c ../lfkeyboards/issi.c ../lfkeyboards/lighting.c diff --git a/keyboards/capsunlocked/cu80/v1/config.h b/keyboards/capsunlocked/cu80/v1/config.h new file mode 100644 index 0000000000..d5123cdbad --- /dev/null +++ b/keyboards/capsunlocked/cu80/v1/config.h @@ -0,0 +1,56 @@ +/* +Copyright 2020 Andy Holland + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER CapsUnlocked +#define PRODUCT CU80 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +#define MATRIX_ROW_PINS { B1, B5, B4, F7, D7, D6 } +#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, C7, C6, B6, B0, E6, B7, B3, B2, D2, D3, D5, D4} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + +//#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 88 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 +#define RGBLIGHT_LIMIT_VAL 50 +#endif diff --git a/keyboards/capsunlocked/cu80/v1/info.json b/keyboards/capsunlocked/cu80/v1/info.json new file mode 100644 index 0000000000..937dfd8b5a --- /dev/null +++ b/keyboards/capsunlocked/cu80/v1/info.json @@ -0,0 +1,13 @@ +{ + "keyboard_name": "CU80", + "url": "https://caps-unlocked.com/group-buy-cu80/", + "maintainer": "aHolland909", + "layouts": { + "LAYOUT_all": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"\u00ac", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"\"", "x":2, "y":1.5}, {"label":"\u00a3", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"@", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] + }, + "LAYOUT_tkl_ansi":{ + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] + } + } +} diff --git a/keyboards/capsunlocked/cu80/v1/keymaps/default/keymap.c b/keyboards/capsunlocked/cu80/v1/keymaps/default/keymap.c new file mode 100644 index 0000000000..befdb527db --- /dev/null +++ b/keyboards/capsunlocked/cu80/v1/keymaps/default/keymap.c @@ -0,0 +1,30 @@ +/* +Copyright 2020 Andy Holland + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), +}; diff --git a/keyboards/capsunlocked/cu80/v1/keymaps/default/readme.md b/keyboards/capsunlocked/cu80/v1/keymaps/default/readme.md new file mode 100644 index 0000000000..e1fd6d7384 --- /dev/null +++ b/keyboards/capsunlocked/cu80/v1/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for CU80
\ No newline at end of file diff --git a/keyboards/capsunlocked/cu80/v1/readme.md b/keyboards/capsunlocked/cu80/v1/readme.md new file mode 100644 index 0000000000..9d6141a4a0 --- /dev/null +++ b/keyboards/capsunlocked/cu80/v1/readme.md @@ -0,0 +1,15 @@ +# CU80 + + + +A customizable 80% keyboard. + +* Keyboard Maintainer: [aHolland909](https://github.com/aholland909) +* Hardware Supported: CU80 +* Hardware Availability: [CapsUnlocked](https://caps-unlocked.com/group-buy-cu80/) + +Make example for this keyboard (after setting up your build environment): + + make capsunlocked/cu80/v1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/capsunlocked/cu80/v1/rules.mk b/keyboards/capsunlocked/cu80/v1/rules.mk new file mode 100644 index 0000000000..6bfd2008a8 --- /dev/null +++ b/keyboards/capsunlocked/cu80/v1/rules.mk @@ -0,0 +1,20 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +LAYOUTS = tkl_iso tkl_ansi diff --git a/keyboards/capsunlocked/cu80/v1/v1.c b/keyboards/capsunlocked/cu80/v1/v1.c new file mode 100644 index 0000000000..96161175b2 --- /dev/null +++ b/keyboards/capsunlocked/cu80/v1/v1.c @@ -0,0 +1,18 @@ +/* +Copyright 2020 Andy Holland + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "v1.h" diff --git a/keyboards/capsunlocked/cu80/v1/v1.h b/keyboards/capsunlocked/cu80/v1/v1.h new file mode 100644 index 0000000000..607b7e3afb --- /dev/null +++ b/keyboards/capsunlocked/cu80/v1/v1.h @@ -0,0 +1,65 @@ +/* +Copyright 2020 Andy Holland + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K010, K011, K012, K013, K014, K015, K016, \ + \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K415, \ + K500, K501, K502, K506, K509, K510, K511, K513, K514, K515, K516 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, KC_NO, K010, K011, K012, K013, K014, K015, K016 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214, K215, K216 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO, KC_NO }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, KC_NO, K415, KC_NO }, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, K509, K510, K511, KC_NO, K513, K514, K515, K516 }, \ +} + +#define LAYOUT_tkl_iso LAYOUT_all + +#define LAYOUT_tkl_ansi( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K010, K011, K012, K013, K014, K015, K016, \ + \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K312, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K415, \ + K500, K501, K502, K506, K509, K510, K511, K513, K514, K515, K516 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, KC_NO, K010, K011, K012, K013, K014, K015, K016 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214, K215, K216 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO, KC_NO }, \ + { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, KC_NO, K415, KC_NO }, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, K509, K510, K511, KC_NO, K513, K514, K515, K516 }, \ +} diff --git a/keyboards/capsunlocked/cu80/v2_ansi/info.json b/keyboards/capsunlocked/cu80/v2_ansi/info.json index f0317de36d..7615d9f029 100644 --- a/keyboards/capsunlocked/cu80/v2_ansi/info.json +++ b/keyboards/capsunlocked/cu80/v2_ansi/info.json @@ -37,7 +37,7 @@ }, "url": "https://caps-unlocked.com/cu80-round-2/", "usb": { - "device_ver": "0x0001", + "device_version": "0.0.1", "pid": "0x0081", "vid": "0x4355" }, diff --git a/keyboards/capsunlocked/cu80/v2_iso/info.json b/keyboards/capsunlocked/cu80/v2_iso/info.json index c332156069..43f074f170 100644 --- a/keyboards/capsunlocked/cu80/v2_iso/info.json +++ b/keyboards/capsunlocked/cu80/v2_iso/info.json @@ -37,7 +37,7 @@ }, "url": "https://caps-unlocked.com/cu80-round-2/", "usb": { - "device_ver": "0x0001", + "device_version": "0.0.1", "pid": "0x0080", "vid": "0x4355" }, |