summaryrefslogtreecommitdiff
path: root/keyboards/centromere
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/centromere')
-rw-r--r--keyboards/centromere/centromere.c48
-rw-r--r--keyboards/centromere/centromere.h47
-rw-r--r--keyboards/centromere/config.h76
-rw-r--r--keyboards/centromere/keymaps/default/keymap.c69
-rw-r--r--keyboards/centromere/keymaps/default_u2/keymap.c68
-rw-r--r--keyboards/centromere/keymaps/default_u2/rules.mk12
-rw-r--r--keyboards/centromere/matrix.c153
-rw-r--r--keyboards/centromere/readme.md1
-rw-r--r--keyboards/centromere/rules.mk42
9 files changed, 516 insertions, 0 deletions
diff --git a/keyboards/centromere/centromere.c b/keyboards/centromere/centromere.c
new file mode 100644
index 0000000000..8800e2ce6a
--- /dev/null
+++ b/keyboards/centromere/centromere.c
@@ -0,0 +1,48 @@
+#include "centromere.h"
+
+void uart_init(void) {
+ SERIAL_UART_INIT();
+}
+
+void led_init(void) {
+#if MCU == atmega32u2
+ setPinOutput(C4); // Set red LED pin as output
+ setPinOutput(C5); // Set blue LED pin as output
+ setPinOutput(D1); // Set green LED pin as output
+
+ writePinHigh(C4); // Turn off red LED pin
+ writePinHigh(C5); // Turn off blue LED pin
+ writePinHigh(D1); // Turn off green LED pin
+
+#else
+
+ setPinOutput(F4); // Set red LED pin as output
+ setPinOutput(F5); // Set blue LED pin as output
+ setPinOutput(D1); // Set green LED pin as output
+
+ writePinHigh(F4); // Turn off red LED pin
+ writePinHigh(F5); // Turn off blue LED pin
+ writePinHigh(D1); // Turn off green LED pin
+
+#endif
+
+}
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ uart_init();
+ led_init();
+}
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+{{9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
+{{9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
+{{9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
+{{9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}},
+{{9, 4}, {8, 4}, {7, 4}, {6, 4}, {5, 4}, {4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}},
+};
+#endif
diff --git a/keyboards/centromere/centromere.h b/keyboards/centromere/centromere.h
new file mode 100644
index 0000000000..826e8dde44
--- /dev/null
+++ b/keyboards/centromere/centromere.h
@@ -0,0 +1,47 @@
+#pragma once
+
+#include "quantum.h"
+
+#if MCU == atmega32u2
+#define red_led_off writePinHigh(C5)
+#define red_led_on writePinLow(C5)
+#define blu_led_off writePinHigh(C4)
+#define blu_led_on writePinLow(C4)
+
+#else
+#define red_led_off writePinHigh(F5)
+#define red_led_on writePinLow(F5)
+#define blu_led_off writePinHigh(F4)
+#define blu_led_on writePinLow(F4)
+
+#endif
+
+#define grn_led_off writePinHigh(D1)
+#define grn_led_on writePinLow(D1)
+
+#define set_led_off red_led_off; blu_led_off
+#define set_led_red red_led_on; grn_led_off; blu_led_off
+#define set_led_blue red_led_off; grn_led_off; blu_led_on
+#define set_led_green red_led_off; grn_led_on; blu_led_off
+#define set_led_yellow red_led_on; grn_led_on; blu_led_off
+#define set_led_magenta red_led_on; grn_led_off; blu_led_on
+#define set_led_cyan red_led_off; grn_led_on; blu_led_on
+#define set_led_white red_led_on; grn_led_on; blu_led_on
+
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+ k0a, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0b, \
+ k1a, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1b,\
+ k2a, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2b,\
+ k32, k33, k34, k35, k36, k37 \
+) \
+ { \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
+ { KC_NO, KC_NO, k32, k33, k34, k35, k36, k37, KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, k2a, k1a, k0a, k0b, k1b, k2b, KC_NO, KC_NO } \
+ }
diff --git a/keyboards/centromere/config.h b/keyboards/centromere/config.h
new file mode 100644
index 0000000000..c051843c50
--- /dev/null
+++ b/keyboards/centromere/config.h
@@ -0,0 +1,76 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Southpaw Design
+#define PRODUCT centromere
+#define DESCRIPTION Q.M.K. keyboard firmware for Centromere
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 10
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+#define ONESHOT_TIMEOUT 500
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+//UART settings for communication with the RF microcontroller
+#define SERIAL_UART_BAUD 500000
+#define SERIAL_UART_DATA UDR1
+#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
+#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
+#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
+#define SERIAL_UART_INIT() do { \
+ /* baud rate */ \
+ UBRR1L = SERIAL_UART_UBRR; \
+ /* baud rate */ \
+ UBRR1H = SERIAL_UART_UBRR >> 8; \
+ /* enable TX and RX */ \
+ UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
+ /* 8-bit data */ \
+ UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
+ } while(0)
diff --git a/keyboards/centromere/keymaps/default/keymap.c b/keyboards/centromere/keymaps/default/keymap.c
new file mode 100644
index 0000000000..ca235f61f5
--- /dev/null
+++ b/keyboards/centromere/keymaps/default/keymap.c
@@ -0,0 +1,69 @@
+#include QMK_KEYBOARD_H
+
+enum centromere_layers
+{
+ _STD,
+ _NUM,
+ _FN
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_STD] = LAYOUT( \
+ //,-----------------------------------------------------. ,-----------------------------------------------------.
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,\
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_LGUI, MO(_FN), KC_SPC, KC_SPC,MO(_NUM), KC_RALT \
+ //`--------------------------' `--------------------------'
+
+ ),
+
+
+ [_NUM] = LAYOUT( \
+ //,-----------------------------------------------------. ,-----------------------------------------------------.
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, KC_ENT,\
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_LGUI, MO(_FN), KC_SPC, KC_ENT,MO(_NUM), KC_RALT \
+ //`--------------------------' `--------------------------'
+ ),
+
+ [_FN] = LAYOUT( \
+ //,-----------------------------------------------------. ,-----------------------------------------------------.
+ KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LCTL, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,\
+
+ KC_LGUI, MO(_FN), KC_SPC, KC_ENT,MO(_NUM), KC_RALT \
+ //`--------------------------' `--------------------------'
+ ),
+
+};
+
+void matrix_scan_user(void) {
+ uint8_t layer = get_highest_layer(layer_state);
+
+ switch (layer) {
+ case _STD:
+ set_led_off;
+ break;
+ case _FN:
+ set_led_blue;
+ break;
+ case _NUM:
+ set_led_red;
+ break;
+ default:
+ break;
+ }
+};
diff --git a/keyboards/centromere/keymaps/default_u2/keymap.c b/keyboards/centromere/keymaps/default_u2/keymap.c
new file mode 100644
index 0000000000..c704adc58c
--- /dev/null
+++ b/keyboards/centromere/keymaps/default_u2/keymap.c
@@ -0,0 +1,68 @@
+#include QMK_KEYBOARD_H
+
+enum centromere_layers
+{
+ _STD,
+ _NUM,
+ _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_STD] = LAYOUT( \
+ //,-----------------------------------------------------. ,-----------------------------------------------------.
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,\
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_LGUI, MO(_FN), KC_SPC, KC_SPC,MO(_NUM), KC_RALT \
+ //`--------------------------' `--------------------------'
+
+ ),
+
+
+ [_NUM] = LAYOUT( \
+ //,-----------------------------------------------------. ,-----------------------------------------------------.
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, KC_ENT,\
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_LGUI, MO(_FN), KC_SPC, KC_ENT,MO(_NUM), KC_RALT \
+ //`--------------------------' `--------------------------'
+ ),
+
+ [_FN] = LAYOUT( \
+ //,-----------------------------------------------------. ,-----------------------------------------------------.
+ KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LCTL, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,\
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,\
+
+ KC_LGUI, MO(_FN), KC_SPC, KC_ENT,MO(_NUM), KC_RALT \
+ //`--------------------------' `--------------------------'
+ ),
+
+};
+
+void matrix_scan_user(void) {
+ uint8_t layer = get_highest_layer(layer_state);
+
+ switch (layer) {
+ case _STD:
+ set_led_off;
+ break;
+ case _FN:
+ set_led_blue;
+ break;
+ case _NUM:
+ set_led_red;
+ break;
+ default:
+ break;
+ }
+};
diff --git a/keyboards/centromere/keymaps/default_u2/rules.mk b/keyboards/centromere/keymaps/default_u2/rules.mk
new file mode 100644
index 0000000000..5fdb02af5a
--- /dev/null
+++ b/keyboards/centromere/keymaps/default_u2/rules.mk
@@ -0,0 +1,12 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
diff --git a/keyboards/centromere/matrix.c b/keyboards/centromere/matrix.c
new file mode 100644
index 0000000000..c5fc8db6ce
--- /dev/null
+++ b/keyboards/centromere/matrix.c
@@ -0,0 +1,153 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+
+#if (MATRIX_COLS <= 8)
+# define print_matrix_header() print("\nr/c 01234567\n")
+# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop(matrix[i])
+# define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
+# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop16(matrix[i])
+# define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop32(matrix[i])
+# define ROW_SHIFTER ((uint32_t)1)
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+ return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+ SERIAL_UART_INIT();
+
+ uint32_t timeout = 0;
+
+ //the s character requests the RF remote slave to send the matrix information
+ SERIAL_UART_DATA = 's';
+
+ //trust the external keystates, erase the last set of data
+ uint8_t uart_data[11] = {0};
+
+ //there are 10 bytes corresponding to 1w columns, and an end byte
+ for (uint8_t i = 0; i < 11; i++) {
+ //wait for the serial data, timeout if it's been too long
+ while(!SERIAL_UART_RXD_PRESENT){
+ timeout++;
+ if (timeout > 10000){
+ break;
+ }
+ }
+ uart_data[i] = SERIAL_UART_DATA;
+ }
+
+ //check for the end packet, the key state bytes use the LSBs, so 0xE0
+ //will only show up here if the correct bytes were recieved
+ if (uart_data[10] == 0xE0)
+ {
+ //shifting and transferring the keystates to the QMK matrix variable
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
+ }
+ }
+
+
+ matrix_scan_quantum();
+ return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print_matrix_header();
+
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ print_matrix_row(row);
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += matrix_bitpop(i);
+ }
+ return count;
+}
diff --git a/keyboards/centromere/readme.md b/keyboards/centromere/readme.md
new file mode 100644
index 0000000000..547ea60ddb
--- /dev/null
+++ b/keyboards/centromere/readme.md
@@ -0,0 +1 @@
+QMK Firmware for the Centromere keyboard. Centromere is a custom wireless ergonomic keyboard, with 6x3 columnar staggered keys and a 3 key thumb cluster. Centromere keyboards can utilize hot-swap Kailh sockets for MX switches, and either Choc or MX switches can be permanently soldered. There are two types of receiver that use two different MCU for the Centromere board, and you can define which one you are using by defining your rules.mk file appropriately, as shown in the default keymaps.
diff --git a/keyboards/centromere/rules.mk b/keyboards/centromere/rules.mk
new file mode 100644
index 0000000000..fee99d3630
--- /dev/null
+++ b/keyboards/centromere/rules.mk
@@ -0,0 +1,42 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency
+F_CPU = 8000000
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = caterina
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+UNICODE_ENABLE = yes # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+USB = /dev/ttyACM0
+
+# upload: build
+# $(CENTROMERE_UPLOAD_COMMAND)
+
+OPT_DEFS += -DCENTROMERE_PROMICRO
+
+# # project specific files
+SRC = matrix.c
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-25 06:05:07 +0000