4 files changed, 144 insertions, 0 deletions
diff --git a/keyboards/clueboard/rev2/Makefile b/keyboards/clueboard/rev2/Makefile
new file mode 100644
index 0000000000..cea967b795
--- /dev/null
+++ b/keyboards/clueboard/rev2/Makefile
@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard/rev2/config.h
new file mode 100644
index 0000000000..e2f8336beb
--- /dev/null
+++ b/keyboards/clueboard/rev2/config.h
@@ -0,0 +1,40 @@
+#ifndef REV2_CONFIG_H
+#define REV2_CONFIG_H
+
+#include "../config.h"
+
+#define PRODUCT_ID      0x2320
+#define DEVICE_VER      0x0001
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Row pin configuration
+* row: 0  1  2  3  4  5  6  7  8  9
+* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2
+*/
+#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 }
+/* Column pin configuration
+ * col: 0  1  2  3  4  5  6  7
+ * pin: F0 F1 F4 F5 F6 F7 E6 B1
+ */
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 }
+#define UNUSED_PINS
+
+ /* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 1
+
+/* Underlight configuration
+ */
+#define ws2812_PORTREG PORTD
+#define ws2812_DDRREG DDRD
+#define ws2812_pin 7
+#define RGBLED_NUM 14     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#endif
+\ No newline at end of file
diff --git a/keyboards/clueboard/rev2/rev2.c b/keyboards/clueboard/rev2/rev2.c
new file mode 100644
index 0000000000..7a8ec368e6
--- /dev/null
+++ b/keyboards/clueboard/rev2/rev2.c
@@ -0,0 +1,47 @@
+#include "rev2.h"
+#include <avr/io.h>
+#include "backlight.h"
+#include "print.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+
+    // JTAG disable for PORT F. write JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+}
+
+
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+void backlight_init_ports(void) {
+    print("init_backlight_pin()\n");
+    // Set our LED pins as output
+    DDRD |= (1<<6); // Esc
+    DDRB |= (1<<7); // Page Up
+    DDRD |= (1<<4); // Arrows
+
+    // Set our LED pins low
+    PORTD &= ~(1<<6); // Esc
+    PORTB &= ~(1<<7); // Page Up
+    PORTD &= ~(1<<4); // Arrows
+}
+
+void backlight_set(uint8_t level) {
+    if ( level == 0 ) {
+        // Turn off light
+        PORTD |= (1<<6); // Esc
+        PORTB |= (1<<7); // Page Up
+        PORTD |= (1<<4); // Arrows
+    } else {
+        // Turn on light
+        PORTD &= ~(1<<6); // Esc
+        PORTB &= ~(1<<7); // Page Up
+        PORTD &= ~(1<<4); // Arrows
+    }
+}
diff --git a/keyboards/clueboard/rev2/rev2.h b/keyboards/clueboard/rev2/rev2.h
new file mode 100644
index 0000000000..912de405da
--- /dev/null
+++ b/keyboards/clueboard/rev2/rev2.h
@@ -0,0 +1,52 @@
+#ifndef REV2_H
+#define REV2_H
+
+#include "../clueboard.h"
+
+/* Clueboard matrix layout
+ * ,-----------------------------------------------------------.  ,---.
+ * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 55| 56|  | 57|
+ * |-----------------------------------------------------------|  |---|
+ * |   10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64|   65|  | 67|
+ * |-----------------------------------------------------------|  `---'
+ * |    20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74|  75|
+ * |------------------------------------------------------------.
+ * |  30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84|  85|86|
+ * |------------------------------------------------------------------.
+ * |  40| 41|  42|  43|   45|       46|   90|  91|  92| 93| 94| 95| 96|
+ * `------------------------------------------------------------------'
+ * ,-----------------------------------------------------------.  ,---.
+ * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Yen| BS|  |Ins|
+ * |-----------------------------------------------------------|  |---|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|  |Del|
+ * |-----------------------------------------------------------|  `---'
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  k|  L|  ;|  '| # | Ent|
+ * |--------------------------------------------------------------.
+ * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  \|Shift| Up|
+ * |------------------------------------------------------------------.
+ * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl|  Fn|Left|Down|Rgt|
+ * `------------------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \
+    k40, k41, k42, k43,      k45, k46,      k90,      k92, k93, k94, k95, k96, k97 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, k43, KC_NO, k45, k46, KC_NO }, \
+    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
+    { k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \
+    { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \
+    { k90, KC_NO, k92, k93, k94, k95, k96, k97 }  \
+}
+
+#endif