diff options
Diffstat (limited to 'keyboards/crkbd/keymaps/default/keymap.c')
| -rw-r--r-- | keyboards/crkbd/keymaps/default/keymap.c | 265 |
1 files changed, 102 insertions, 163 deletions
diff --git a/keyboards/crkbd/keymaps/default/keymap.c b/keyboards/crkbd/keymaps/default/keymap.c index a3a9d95351..27e3c84061 100644 --- a/keyboards/crkbd/keymaps/default/keymap.c +++ b/keyboards/crkbd/keymaps/default/keymap.c @@ -18,218 +18,157 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include QMK_KEYBOARD_H - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 -#define _ADJUST 3 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - ADJUST, - BACKLIT, - RGBRST -}; - -enum macro_keycodes { - KC_SAMPLEMACRO, -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_split_3x6_3( \ + [0] = LAYOUT_split_3x6_3( //,-----------------------------------------------------. ,-----------------------------------------------------. - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,\ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ESC, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \ + KC_LGUI, MO(1), KC_SPC, KC_ENT, MO(2), KC_RALT //`--------------------------' `--------------------------' ), - [_LOWER] = LAYOUT_split_3x6_3( \ + [1] = LAYOUT_split_3x6_3( //,-----------------------------------------------------. ,-----------------------------------------------------. - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,\ + KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, XXXXXXX, XXXXXXX,\ + KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\ + KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \ + KC_LGUI, _______, KC_SPC, KC_ENT, MO(3), KC_RALT //`--------------------------' `--------------------------' - ), + ), - [_RAISE] = LAYOUT_split_3x6_3( \ + [2] = LAYOUT_split_3x6_3( //,-----------------------------------------------------. ,-----------------------------------------------------. - KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,\ + KC_TAB, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,\ + KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,\ + KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TILD, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \ + KC_LGUI, MO(3), KC_SPC, KC_ENT, _______, KC_RALT //`--------------------------' `--------------------------' ), - [_ADJUST] = LAYOUT_split_3x6_3( \ + [3] = LAYOUT_split_3x6_3( //,-----------------------------------------------------. ,-----------------------------------------------------. - RESET, RGBRST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\ + RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\ + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\ + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \ + KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT //`--------------------------' `--------------------------' ) }; -int RGB_current_mode; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -// Setting ADJUST layer RGB back to default -void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { - layer_on(layer3); - } else { - layer_off(layer3); +#ifdef OLED_DRIVER_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (!is_master) { + return OLED_ROTATION_180; // flips the display 180 degrees if offhand } + return rotation; } -void matrix_init_user(void) { - #ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; - #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif +#define L_BASE 0 +#define L_LOWER 2 +#define L_RAISE 4 +#define L_ADJUST 8 + +void oled_render_layer_state(void) { + oled_write_P(PSTR("Layer: "), false); + switch (layer_state) { + case L_BASE: + oled_write_ln_P(PSTR("Default"), false); + break; + case L_LOWER: + oled_write_ln_P(PSTR("Lower"), false); + break; + case L_RAISE: + oled_write_ln_P(PSTR("Raise"), false); + break; + case L_ADJUST: + case L_ADJUST|L_LOWER: + case L_ADJUST|L_RAISE: + case L_ADJUST|L_LOWER|L_RAISE: + oled_write_ln_P(PSTR("Adjust"), false); + break; + } } -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED -// When add source files to SRC in rules.mk, you can use functions. -const char *read_layer_state(void); -const char *read_logo(void); -void set_keylog(uint16_t keycode, keyrecord_t *record); -const char *read_keylog(void); -const char *read_keylogs(void); +char keylog_str[24] = {}; -// const char *read_mode_icon(bool swap); -// const char *read_host_led_state(void); -// void set_timelog(void); -// const char *read_timelog(void); +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', + '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '}; -void matrix_scan_user(void) { - iota_gfx_task(); +void set_keylog(uint16_t keycode, keyrecord_t *record) { + char name = ' '; + if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || + (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; } + if (keycode < 60) { + name = code_to_name[keycode]; + } + + // update keylog + snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", + record->event.key.row, record->event.key.col, + keycode, name); } -void matrix_render_user(struct CharacterMatrix *matrix) { - if (is_master) { - // If you want to change the display of OLED, you need to change here - matrix_write_ln(matrix, read_layer_state()); - matrix_write_ln(matrix, read_keylog()); - //matrix_write_ln(matrix, read_keylogs()); - //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); - //matrix_write_ln(matrix, read_host_led_state()); - //matrix_write_ln(matrix, read_timelog()); - } else { - matrix_write(matrix, read_logo()); - } +void oled_render_keylog(void) { + oled_write(keylog_str, false); } -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } +void render_bootmagic_status(bool status) { + /* Show Ctrl-Gui Swap options */ + static const char PROGMEM logo[][2][3] = { + {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}, + {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, + }; + if (status) { + oled_write_ln_P(logo[0][0], false); + oled_write_ln_P(logo[0][1], false); + } else { + oled_write_ln_P(logo[1][0], false); + oled_write_ln_P(logo[1][1], false); + } } -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - matrix_render_user(&matrix); - matrix_update(&display, &matrix); +void oled_render_logo(void) { + static const char PROGMEM crkbd_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, + 0}; + oled_write_P(crkbd_logo, false); +} + +void oled_task_user(void) { + if (is_master) { + oled_render_layer_state(); + oled_render_keylog(); + } else { + oled_render_logo(); + } } -#endif//SSD1306OLED bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { -#ifdef SSD1306OLED set_keylog(keycode, record); -#endif - // set_timelog(); - } - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - case RGB_MOD: - #ifdef RGBLIGHT_ENABLE - if (record->event.pressed) { - rgblight_mode(RGB_current_mode); - rgblight_step(); - RGB_current_mode = rgblight_config.mode; - } - #endif - return false; - case RGBRST: - #ifdef RGBLIGHT_ENABLE - if (record->event.pressed) { - eeconfig_update_rgblight_default(); - rgblight_enable(); - RGB_current_mode = rgblight_config.mode; - } - #endif - break; } return true; } +#endif // OLED_DRIVER_ENABLE |