diff options
Diffstat (limited to 'keyboards/crkbd/keymaps/thefrey')
| -rw-r--r-- | keyboards/crkbd/keymaps/thefrey/README.md | 16 | ||||
| -rw-r--r-- | keyboards/crkbd/keymaps/thefrey/config.h | 45 | ||||
| -rw-r--r-- | keyboards/crkbd/keymaps/thefrey/keymap.c | 243 | ||||
| -rw-r--r-- | keyboards/crkbd/keymaps/thefrey/rules.mk | 31 |
4 files changed, 0 insertions, 335 deletions
diff --git a/keyboards/crkbd/keymaps/thefrey/README.md b/keyboards/crkbd/keymaps/thefrey/README.md deleted file mode 100644 index 69b20cfcd6..0000000000 --- a/keyboards/crkbd/keymaps/thefrey/README.md +++ /dev/null @@ -1,16 +0,0 @@ - - -# Keyboard layout by the-frey - -This is a layout that allows access to all the paren keys easily, has a tab on the lower layer (for SUPER-TAB app switching) and some utility features like PGUP/PGDOWN and HOME/END. - -In addition, the arrows are on the lower layer and are bound to the vim keys (h,j,k,l). I've found this a productive layout for programming in emacs and hopefully you will too. - -The layout image above shows the keymap, with each key marked with all three layers: - -- The top indicates the raise layer -- The middle indicates the default layer -- The bottom indicates the lower layer - -All the keys respond as you'd expect to the 'shift' key - i.e. on a UK/GB keyboard, `/` becomes `?` and so on. - diff --git a/keyboards/crkbd/keymaps/thefrey/config.h b/keyboards/crkbd/keymaps/thefrey/config.h deleted file mode 100644 index cee901fc81..0000000000 --- a/keyboards/crkbd/keymaps/thefrey/config.h +++ /dev/null @@ -1,45 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -//#define USE_MATRIX_I2C -#define FORCE_NKRO - -/* Select hand configuration */ - -#define MASTER_LEFT -// #define MASTER_RIGHT -// #define EE_HANDS - -#define SSD1306OLED - -#define USE_SERIAL_PD2 - -#define TAPPING_FORCE_HOLD -#define TAPPING_TERM 100 - -#undef RGBLED_NUM -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 27 -#define RGBLIGHT_LIMIT_VAL 120 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/crkbd/keymaps/thefrey/keymap.c b/keyboards/crkbd/keymaps/thefrey/keymap.c deleted file mode 100644 index 9a142a924a..0000000000 --- a/keyboards/crkbd/keymaps/thefrey/keymap.c +++ /dev/null @@ -1,243 +0,0 @@ -#include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA - #include "lufa.h" - #include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 -#define _ADJUST 3 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - ADJUST, - BACKLIT, - RGBRST -}; - -enum macro_keycodes { - KC_SAMPLEMACRO, -}; - -#define KC______ KC_TRNS -#define KC_XXXXX KC_NO -#define KC_LOWER LOWER -#define KC_RAISE RAISE -#define KC_RST RESET -#define KC_LRST RGBRST -#define KC_LTOG RGB_TOG -#define KC_LHUI RGB_HUI -#define KC_LHUD RGB_HUD -#define KC_LSAI RGB_SAI -#define KC_LSAD RGB_SAD -#define KC_LVAI RGB_VAI -#define KC_LVAD RGB_VAD -#define KC_LMOD RGB_MOD -#define KC_CTLTB CTL_T(KC_TAB) -#define KC_GUIEI GUI_T(KC_LANG2) -#define KC_ALTKN ALT_T(KC_LANG1) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_kc( \ - //,-----------------------------------------. ,-----------------------------------------. - ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - CTLTB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,\ - //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ - //`--------------------' `--------------------' - ), - - [_LOWER] = LAYOUT_kc( \ - //,-----------------------------------------. ,-----------------------------------------. - TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - CTLTB, MUTE, VOLD, VOLU, PGUP, PGDN, LEFT, DOWN, UP, RIGHT, HOME, END,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LSFT, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, XXXXX,\ - //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ - //`--------------------' `--------------------' - ), - - [_RAISE] = LAYOUT_kc( \ - //,-----------------------------------------. ,-----------------------------------------. - ESC, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, BSPC,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - CTLTB, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, GRV,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, UNDS, PLUS, LBRC, RBRC, BSLS, TILD,\ - //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ - //`--------------------' `--------------------' - ), - - [_ADJUST] = LAYOUT_kc( \ - //,-----------------------------------------. ,-----------------------------------------. - RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ - //|------+------+------+------+------+------| |------+------+------+------+------+------| - LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ - //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ - //`--------------------' `--------------------' - ) -}; - -int RGB_current_mode; - -// Setting ADJUST layer RGB back to default -void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { - layer_on(layer3); - } else { - layer_off(layer3); - } -} - -void matrix_init_user(void) { - #ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; - #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif -} - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// When add source files to SRC in rules.mk, you can use functions. -const char *read_layer_state(void); -const char *read_logo(void); -void set_keylog(uint16_t keycode, keyrecord_t *record); -const char *read_keylog(void); -const char *read_keylogs(void); - -// const char *read_mode_icon(bool swap); -// const char *read_host_led_state(void); -// void set_timelog(void); -// const char *read_timelog(void); - -void matrix_scan_user(void) { - iota_gfx_task(); -} - -void matrix_render_user(struct CharacterMatrix *matrix) { - if (is_master) { - // If you want to change the display of OLED, you need to change here - matrix_write_ln(matrix, read_layer_state()); - matrix_write_ln(matrix, read_keylog()); - matrix_write_ln(matrix, read_keylogs()); - //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); - //matrix_write_ln(matrix, read_host_led_state()); - //matrix_write_ln(matrix, read_timelog()); - } else { - matrix_write(matrix, read_logo()); - } -} - -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - matrix_render_user(&matrix); - matrix_update(&display, &matrix); -} -#endif//SSD1306OLED - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { -#ifdef SSD1306OLED - set_keylog(keycode, record); -#endif - // set_timelog(); - } - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - case RGB_MOD: - #ifdef RGBLIGHT_ENABLE - if (record->event.pressed) { - rgblight_mode(RGB_current_mode); - rgblight_step(); - RGB_current_mode = rgblight_config.mode; - } - #endif - return false; - break; - case RGBRST: - #ifdef RGBLIGHT_ENABLE - if (record->event.pressed) { - eeconfig_update_rgblight_default(); - rgblight_enable(); - RGB_current_mode = rgblight_config.mode; - } - #endif - break; - } - return true; -} diff --git a/keyboards/crkbd/keymaps/thefrey/rules.mk b/keyboards/crkbd/keymaps/thefrey/rules.mk deleted file mode 100644 index 16deaf45d1..0000000000 --- a/keyboards/crkbd/keymaps/thefrey/rules.mk +++ /dev/null @@ -1,31 +0,0 @@ - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -# If you want to change the display of OLED, you need to change here -SRC += ./lib/glcdfont.c \ - ./lib/rgb_state_reader.c \ - ./lib/layer_state_reader.c \ - ./lib/logo_reader.c \ - ./lib/keylogger.c \ - # ./lib/mode_icon_reader.c \ - # ./lib/host_led_state_reader.c \ - # ./lib/timelogger.c \ |