diff options
Diffstat (limited to 'keyboards/dekunukem')
| -rw-r--r-- | keyboards/dekunukem/duckypad/chconf.h | 714 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/config.h | 61 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/duckypad.c | 53 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/duckypad.h | 32 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/halconf.h | 525 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/info.json | 30 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/keymaps/default/config.h | 59 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/keymaps/default/keymap.c | 159 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/keymaps/default/readme.md | 19 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/keymaps/m4cs/config.h | 75 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c | 236 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/keymaps/m4cs/readme.md | 25 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/keymaps/m4cs/rules.mk | 2 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/mcuconf.h | 178 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/readme.md | 16 | ||||
| -rw-r--r-- | keyboards/dekunukem/duckypad/rules.mk | 24 |
16 files changed, 2208 insertions, 0 deletions
diff --git a/keyboards/dekunukem/duckypad/chconf.h b/keyboards/dekunukem/duckypad/chconf.h new file mode 100644 index 0000000000..85c1c9b3b9 --- /dev/null +++ b/keyboards/dekunukem/duckypad/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM FALSE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS FALSE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS FALSE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY FALSE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/dekunukem/duckypad/config.h b/keyboards/dekunukem/duckypad/config.h new file mode 100644 index 0000000000..27806ab83d --- /dev/null +++ b/keyboards/dekunukem/duckypad/config.h @@ -0,0 +1,61 @@ +/* + +QMK Firmware for dekuNukem/duckyPad + +Copyright (C) 2020 Max Bridgland <@M4cs> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0B91 +#define DEVICE_VER 0x0001 +#define MANUFACTURER dekuNukem +#define PRODUCT duckyPad + +#define MATRIX_ROWS 1 +#define MATRIX_COLS 17 + +#define DIRECT_PINS {{ B13, B14, B15, A8, A15, B3, B4, B5, B6, B7, C13, C14, C15, F0, F1, A1, A2 }} + +#define RGB_DI_PIN A10 +#define RGBLED_NUM 15 +#define DRIVER_LED_TOTAL 15 + +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define RGB_MATRIX_STARTUP_HUE 221 + +#define I2C1_SCL_BANK GPIOB +#define I2C1_SCL 8 +#define I2C1_SDA_BANK GPIOB +#define I2C1_SDA 9 + +#define I2C1_SCL_PAL_MODE 1 +#define I2C1_SDA_PAL_MODE 1 + +#define I2C1_OPMODE OPMODE_I2C +#define I2C1_CLOCK_SPEED 100000 +#define I2C1_DUTY_CYCLE STD_DUTY_CYCLE + +#define OLED_DISPLAY_ADDRESS 0x3C +#define OLED_DISPLAY_128X64 +#define OLED_COM_PINS 0x12 + +#define OLED_IC OLED_IC_SH1106 +#define OLED_COLUMN_OFFSET 2 diff --git a/keyboards/dekunukem/duckypad/duckypad.c b/keyboards/dekunukem/duckypad/duckypad.c new file mode 100644 index 0000000000..831a42a048 --- /dev/null +++ b/keyboards/dekunukem/duckypad/duckypad.c @@ -0,0 +1,53 @@ +/* + +QMK Firmware for dekuNukem/duckyPad + +Copyright (C) 2020 Anthony Som + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "duckypad.h" + +led_config_t g_led_config = { { + { 2, 1, 0, 3, 4, 5, 8, 7, 6, 9, 10, 11, 14, 13, 12, NO_LED, NO_LED } +}, { + {224, 0}, + {112, 0}, + {0, 0}, + {0, 16}, + {112, 16}, + {224, 16}, + {224, 32}, + {112, 32}, + {0, 32}, + {0, 48}, + {112, 48}, + {224, 48}, + {224, 64}, + {112, 64}, + {0, 64}, +}, { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, +} }; + +void keyboard_pre_init_kb(void) { + setPinOutput(A0); + writePinHigh(A0); + writePinLow(A0); + wait_ms(10); + writePinHigh(A0); + + keyboard_pre_init_user(); +} diff --git a/keyboards/dekunukem/duckypad/duckypad.h b/keyboards/dekunukem/duckypad/duckypad.h new file mode 100644 index 0000000000..abde7aac65 --- /dev/null +++ b/keyboards/dekunukem/duckypad/duckypad.h @@ -0,0 +1,32 @@ +/* + +QMK Firmware for dekuNukem/duckyPad + +Copyright (C) 2020 Anthony Som + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + k00, k01, k02, \ + k10, k11, k12, \ + k20, k21, k22, \ + k30, k31, k32, \ + k40, k41, k42, \ + kDown, kUp \ +) {{k00, k01, k02, k10, k11, k12, k20, k21, k22, k30, k31, k32, k40, k41, k42, kDown, kUp}} diff --git a/keyboards/dekunukem/duckypad/halconf.h b/keyboards/dekunukem/duckypad/halconf.h new file mode 100644 index 0000000000..d08e88460f --- /dev/null +++ b/keyboards/dekunukem/duckypad/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI TRUE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/dekunukem/duckypad/info.json b/keyboards/dekunukem/duckypad/info.json new file mode 100644 index 0000000000..664e9314c9 --- /dev/null +++ b/keyboards/dekunukem/duckypad/info.json @@ -0,0 +1,30 @@ +{ + "keyboard_name": "duckyPad", + "url": "https://github.com/dekuNukem/", + "maintainer": "M4cs", + "width": 3, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 0, "y": 1}, + {"x": 1, "y": 1}, + {"x": 2, "y": 1}, + {"x": 0, "y": 2}, + {"x": 1, "y": 2}, + {"x": 2, "y": 2}, + {"x": 0, "y": 3}, + {"x": 1, "y": 3}, + {"x": 2, "y": 3}, + {"x": 0, "y": 4}, + {"x": 1, "y": 4}, + {"x": 2, "y": 4}, + {"x": 3, "y": 4}, + {"x": 4, "y": 4} + ] + } + } +} diff --git a/keyboards/dekunukem/duckypad/keymaps/default/config.h b/keyboards/dekunukem/duckypad/keymaps/default/config.h new file mode 100644 index 0000000000..9d26b71162 --- /dev/null +++ b/keyboards/dekunukem/duckypad/keymaps/default/config.h @@ -0,0 +1,59 @@ +/* + +Default Keymap Config for dekuNukem/duckyPad QMK firmware + +Copyright (C) 2020 Max Bridgland + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define NO_ACTION_FUNCTION +#define NO_ACTION_ONESHOT + +#define OLED_TIMEOUT 90000 +#define RGB_DISABLE_TIMEOUT 90000 + +#define MT_0_0 " 1 " +#define MT_0_1 " 2 " +#define MT_0_2 " 3 " +#define MT_0_3 " 4 " +#define MT_0_4 " 5 " +#define MT_0_5 " 6 " +#define MT_0_6 " 7 " +#define MT_0_7 " 8 " +#define MT_0_8 " 9 " +#define MT_0_9 " . " +#define MT_0_10 " 0 " +#define MT_0_11 " = " +#define MT_0_12 " - " +#define MT_0_13 " + " +#define MT_0_14 " enter" + +#define MT_1_0 " stat " +#define MT_1_1 " brth " +#define MT_1_2 " rbow " +#define MT_1_3 " swrl " +#define MT_1_4 " spd- " +#define MT_1_5 " spd+ " +#define MT_1_6 " eff- " +#define MT_1_7 " sat- " +#define MT_1_8 " sat+ " +#define MT_1_9 " eff+ " +#define MT_1_10 " hue- " +#define MT_1_11 " hue+ " +#define MT_1_12 " powr " +#define MT_1_13 " bri- " +#define MT_1_14 " bri+ " diff --git a/keyboards/dekunukem/duckypad/keymaps/default/keymap.c b/keyboards/dekunukem/duckypad/keymaps/default/keymap.c new file mode 100644 index 0000000000..3b30c42ff3 --- /dev/null +++ b/keyboards/dekunukem/duckypad/keymaps/default/keymap.c @@ -0,0 +1,159 @@ +/* + +Default Keymap for dekuNukem/duckyPad QMK firmware + +Copyright (C) 2020 Max Bridgland + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +#include "stdio.h" +#include <unistd.h> +#include <string.h> + +#define LOGO_SIZE 384 + +bool rgbToggled = false; + +enum layer_codes { + RGB_LAYER = SAFE_RANGE +}; + +enum my_keycodes { + Z0 = SAFE_RANGE, Z1, Z2, + Z3, Z4, Z5, + Z6, Z7, Z8, + Z9, Z10, Z11, + Z12, Z13, Z14 +}; + +#define _DEFAULT 0 +#define _RGB 1 + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + ,=========================================. + | Numpad 1 | Numpad 2 | Numpad 3 | + |=========================================| + | Numpad 4 | Numpad 5 | Numpad 6 | + |=========================================| + | Numpad 7 | Numpad 8 | Numpad 9 | + |=========================================| + | Numpad . | Numpad 0 | Numpad = | + |=========================================| ,---------------------. + | Numpad - | Numpad + | Numpad * | | RGB Menu | Blank | + `=========================================' `--------------------' + */ + [_DEFAULT] = LAYOUT( + KC_P1, KC_P2, KC_P3, + KC_P4, KC_P5, KC_P6, + KC_P7, KC_P8, KC_P9, + KC_PDOT, KC_P0, KC_PENT, + KC_PMNS, KC_PPLS, KC_EQL, + RGB_LAYER, KC_NO + ), + /* + ,=========================================. + | Plain RGB | Breathe RGB | Rainbow RGB | + |=========================================| + | Swirl RGB | Speed Down | Speed Up | + |=========================================| + | Effect Up | Sat. Down | Sat. Up | + |=========================================| + | Effect Down | Hue Down | Hue Up | + |=========================================| ,----------------------. + | Toggle RGB | Brt. Down | Brt. Up | | Norm Menu | Blank | + `=========================================' `---------------------' + */ + [_RGB] = LAYOUT( + RGB_MODE_PLAIN, RGB_MODE_BREATHE, RGB_MODE_RAINBOW, + RGB_MODE_SWIRL, RGB_SPD, RGB_SPI, + RGB_MOD, RGB_SAD, RGB_SAI, + RGB_RMOD, RGB_HUD, RGB_HUI, + RGB_TOG, RGB_VAD, RGB_VAI, + RGB_LAYER, KC_NO + ) +}; + +static void render_logo(void) { + static const char PROGMEM ducky_logo[LOGO_SIZE] = { + 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0, 0, 0, 0,252,252,252, 0, 0, 0, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0,128,128,128,128, 0,248,248,248, 56, 56, 56, 56, 56, 56,120,240,224,192, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0, 0, 0,232, 24, 24,232, 0, 24, 48, 48, 24, 0,232, 24, 24,232, 0, 0, + 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,255,255,255, 0,248,254,255,143, 7, 3, 3, 3, 3,143, 7, 2, 0, 0,255,255,255,240,120,252,254,231,131, 1, 0, 1, 7, 63,254,240,192, 0,224,252,127, 31, 3, 0, 0,255,255,255,112,112,112,112,112,112, 56, 63, 31, 15,193,231,243,115, 51, 51, 51, 55,255,255,252, 0, 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0, 0, 0, 21,127,127,252,252,252,253,253,252,252,252,255,255,255, 0, 0, + 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 6, 3, 15, 15, 15, 0, 0, 3, 7, 7, 15, 14, 14, 14, 14, 7, 7, 2, 0, 0, 15, 15, 15, 0, 0, 0, 1, 3, 15, 15, 12,136,224,224,224,247,127,127, 31, 3, 0, 0, 0, 0, 0, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 14, 14, 14, 6, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 7, 11, 3, 11, 7, 11, 7, 7, 31, 0, 0 + }; + oled_write_raw_P(ducky_logo, LOGO_SIZE); +} + +char* make_menu_text(void){ + char *s = malloc((30 * 6) * sizeof(*s)); + int width = 3; + sprintf(s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s", + width, MT_0_0, width, MT_0_1, width, MT_0_2, + width, MT_0_3, width, MT_0_4, width, MT_0_5, + width, MT_0_6, width, MT_0_7, width, MT_0_8, + width, MT_0_9, width, MT_0_10, width,MT_0_11, + width, MT_0_12, width, MT_0_13, width, MT_0_14 + ); + return s; +}; + +char* make_rgb_text(void){ + char *s = malloc((30 * 6) * sizeof(*s)); + int width = 3; + sprintf( + s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s", + width, MT_1_0, width, MT_1_1, width, MT_1_2, + width, MT_1_3, width, MT_1_4, width, MT_1_5, + width, MT_1_6, width, MT_1_7, width, MT_1_8, + width, MT_1_9, width, MT_1_10, width,MT_1_11, + width, MT_1_12, width, MT_1_13, width, MT_1_14 + ); + return s; +}; + +void oled_task_user(void) { + render_logo(); + oled_set_cursor(0,3); + if (rgbToggled) { + char *s = make_rgb_text(); + oled_write_ln_P(s, false); + free(s); + } else { + char *s = make_menu_text(); + oled_write_ln_P(s, false); + free(s); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case RGB_LAYER: + if (record->event.pressed) { + if (rgbToggled) { + rgbToggled = false; + layer_clear(); + } else { + rgbToggled = true; + layer_on(_RGB); + } + } + return false; + default: + return true; + } + return false; +} diff --git a/keyboards/dekunukem/duckypad/keymaps/default/readme.md b/keyboards/dekunukem/duckypad/keymaps/default/readme.md new file mode 100644 index 0000000000..0240cd573b --- /dev/null +++ b/keyboards/dekunukem/duckypad/keymaps/default/readme.md @@ -0,0 +1,19 @@ +Default duckyPad Layout + +### Layers: + +0: Default Layer w/ Numpad Functionality + +1: RGB Menu that allows RGB customization + +### Configuration: + +To change the menu, edit the `MT_X_XX` values in `config.h`. The sytax is as follows: `MT_A_B`, where A equals the layer, and B equals the key from 0-14. + +### Need Help? + +Contact me on discord: macs#0420 + +or join the duckyPad Discord and find me in there :) + +https://discord.gg/ADtrCjf diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/config.h b/keyboards/dekunukem/duckypad/keymaps/m4cs/config.h new file mode 100644 index 0000000000..7d0bbb1341 --- /dev/null +++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/config.h @@ -0,0 +1,75 @@ +/* + +M4cs Keymap for dekuNukem/duckyPad QMK firmware + +Copyright (C) 2020 Max Bridgland + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define NO_ACTION_FUNCTION +#define NO_ACTION_ONESHOT + +#define OLED_TIMEOUT 90000 +#define RGB_DISABLE_TIMEOUT 90000 + +#define MT_0_0 " prev " +#define MT_0_1 " pl/pa" +#define MT_0_2 " next " +#define MT_0_3 " volx " +#define MT_0_4 " vol- " +#define MT_0_5 " vol+ " +#define MT_0_6 " spot " +#define MT_0_7 " ffox " +#define MT_0_8 " code " +#define MT_0_9 " term " +#define MT_0_10 " steam" +#define MT_0_11 " dscd " +#define MT_0_12 " " +#define MT_0_13 " micx " +#define MT_0_14 " " + +#define MT_1_0 " stat " +#define MT_1_1 " brth " +#define MT_1_2 " rbow " +#define MT_1_3 " swrl " +#define MT_1_4 " spd- " +#define MT_1_5 " spd+ " +#define MT_1_6 " eff- " +#define MT_1_7 " sat- " +#define MT_1_8 " sat+ " +#define MT_1_9 " eff+ " +#define MT_1_10 " hue- " +#define MT_1_11 " hue+ " +#define MT_1_12 " powr " +#define MT_1_13 " bri- " +#define MT_1_14 " bri+ " + +#define MT_2_0 " " +#define MT_2_1 " " +#define MT_2_2 " " +#define MT_2_3 " undo " +#define MT_2_4 " cut " +#define MT_2_5 " copy " +#define MT_2_6 " paste" +#define MT_2_7 " find " +#define MT_2_8 " pscr " +#define MT_2_9 " " +#define MT_2_10 " " +#define MT_2_11 " " +#define MT_2_12 " " +#define MT_2_13 " " +#define MT_2_14 " " diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c b/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c new file mode 100644 index 0000000000..2ce15d7e77 --- /dev/null +++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c @@ -0,0 +1,236 @@ +/* + +M4cs Keymap for dekuNukem/duckyPad QMK firmware + +Copyright (C) 2020 Max Bridgland + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +#include "stdio.h" +#include <unistd.h> +#include <string.h> + +#define LOGO_SIZE 384 + +bool rgbToggled = false; +bool altToggled = false; + +enum layer_codes { + RGB_LAYER = SAFE_RANGE, + ALT_LAYER +}; + +enum my_keycodes { + Z0 = SAFE_RANGE, Z1, Z2, + Z3, Z4, Z5, + Z6, Z7, Z8, + Z9, Z10, Z11, + Z12, Z13, Z14 +}; + +#define MAC_1 LCTL(LALT(KC_MINS)) +#define MAC_2 LCTL(LALT(KC_EQL)) +#define MAC_3 LCTL(LALT(KC_LBRC)) +#define MAC_4 LCTL(LALT(KC_RBRC)) +#define MAC_5 LCTL(LALT(KC_BSLS)) +#define MAC_6 LCTL(LALT(KC_SCLN)) +#define MAC_7 LCTL(LALT(KC_QUOT)) +#define MAC_8 LCTL(LALT(KC_COMM)) +#define MAC_9 LCTL(LALT(KC_SLSH)) + +#define MAC_10 LCTL(LSFT(KC_MINS)) +#define MAC_11 LCTL(LSFT(KC_EQL)) +#define MAC_12 LCTL(LSFT(KC_SLSH)) +#define MAC_13 LCTL(LSFT(KC_LBRC)) +#define MAC_14 LCTL(LSFT(KC_RBRC)) +#define MAC_15 LCTL(LSFT(KC_BSLS)) +#define MAC_16 LCTL(LSFT(KC_SCLN)) +#define MAC_17 LCTL(LSFT(KC_QUOT)) +#define MAC_18 LCTL(LSFT(KC_COMM)) + +#define _DEFAULT 0 +#define _RGB 1 +#define _ALT 2 + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + ,=========================================. + | Media Prev. | Media Play | Media Next | + |=========================================| + | Mute Sound | Volume Do. | Volume Up | + |=========================================| + | Macro 1 | Macro 2 | Macro 3 | + |=========================================| + | Macro 4 | Macro 5 | Macro 6 | + |=========================================| ,---------------------. + | Macro 7 | Macro 8 | Macro 9 | | RGB Menu | Alt Menu | + `=========================================' `--------------------' + */ + [_DEFAULT] = LAYOUT( + KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, + KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, + MAC_1, MAC_2, MAC_3, + MAC_4, MAC_5, MAC_6, + MAC_7, MAC_8, MAC_9, + RGB_LAYER, ALT_LAYER + ), + /* + ,=========================================. + | Plain RGB | Breathe RGB | Rainbow RGB | + |=========================================| + | Swirl RGB | Speed Down | Speed Up | + |=========================================| + | Effect Up | Sat. Down | Sat. Up | + |=========================================| + | Effect Down | Hue Down | Hue Up | + |=========================================| ,----------------------. + | Toggle RGB | Brt. Down | Brt. Up | | Norm Menu | Alt Menu | + `=========================================' `---------------------' + */ + [_RGB] = LAYOUT( + RGB_MODE_PLAIN, RGB_MODE_BREATHE, RGB_MODE_RAINBOW, + RGB_MODE_SWIRL, RGB_SPD, RGB_SPI, + RGB_MOD, RGB_SAD, RGB_SAI, + RGB_RMOD, RGB_HUD, RGB_HUI, + RGB_TOG, RGB_VAD, RGB_VAI, + RGB_LAYER, ALT_LAYER + ), + /* + ,=========================================. + | Macro 10 | Macro 11 | Macro 12 | + |=========================================| + | Undo | Cut | Copy | + |=========================================| + | Paste | Find | Prnt Scrn. | + |=========================================| + | Macro 13 | Macro 14 | Macro 15 | + |=========================================| ,----------------------. + | Macro 16 | Macro 17 | Macro 18 | | Norm Menu | Alt Menu | + `=========================================' `---------------------' + */ + [_ALT] = LAYOUT( + MAC_10, MAC_11, MAC_12, + KC_UNDO, KC_CUT, KC_COPY, + KC_PASTE, KC_FIND, KC_PSCR, + MAC_13, MAC_14, MAC_15, + MAC_16, MAC_17, MAC_18, + RGB_LAYER, ALT_LAYER + ) +}; + +static void render_logo(void) { + static const char PROGMEM ducky_logo[LOGO_SIZE] = { + 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0, 0, 0, 0,252,252,252, 0, 0, 0, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0,128,128,128,128, 0,248,248,248, 56, 56, 56, 56, 56, 56,120,240,224,192, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0, 0, 0,232, 24, 24,232, 0, 24, 48, 48, 24, 0,232, 24, 24,232, 0, 0, + 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,255,255,255, 0,248,254,255,143, 7, 3, 3, 3, 3,143, 7, 2, 0, 0,255,255,255,240,120,252,254,231,131, 1, 0, 1, 7, 63,254,240,192, 0,224,252,127, 31, 3, 0, 0,255,255,255,112,112,112,112,112,112, 56, 63, 31, 15,193,231,243,115, 51, 51, 51, 55,255,255,252, 0, 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0, 0, 0, 21,127,127,252,252,252,253,253,252,252,252,255,255,255, 0, 0, + 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 6, 3, 15, 15, 15, 0, 0, 3, 7, 7, 15, 14, 14, 14, 14, 7, 7, 2, 0, 0, 15, 15, 15, 0, 0, 0, 1, 3, 15, 15, 12,136,224,224,224,247,127,127, 31, 3, 0, 0, 0, 0, 0, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 14, 14, 14, 6, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 7, 11, 3, 11, 7, 11, 7, 7, 31, 0, 0 + }; + oled_write_raw_P(ducky_logo, LOGO_SIZE); +} + +char* make_menu_text(void){ + char *s = malloc((30 * 3) * sizeof(*s)); + int width = 3; + sprintf(s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s", + width, MT_0_0, width, MT_0_1, width, MT_0_2, + width, MT_0_3, width, MT_0_4, width, MT_0_5, + width, MT_0_6, width, MT_0_7, width, MT_0_8, + width, MT_0_9, width, MT_0_10, width,MT_0_11, + width, MT_0_12, width, MT_0_13, width, MT_0_14 + ); + return s; +}; + +char* make_rgb_text(void){ + char *s = malloc((30 * 3) * sizeof(*s)); + int width = 3; + sprintf( + s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s", + width, MT_1_0, width, MT_1_1, width, MT_1_2, + width, MT_1_3, width, MT_1_4, width, MT_1_5, + width, MT_1_6, width, MT_1_7, width, MT_1_8, + width, MT_1_9, width, MT_1_10, width,MT_1_11, + width, MT_1_12, width, MT_1_13, width, MT_1_14 + ); + return s; +}; + +char* make_alt_text(void){ + char *s = malloc((30 * 3) * sizeof(*s)); + int width = 3; + sprintf( + s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s", + width, MT_2_0, width, MT_2_1, width, MT_2_2, + width, MT_2_3, width, MT_2_4, width, MT_2_5, + width, MT_2_6, width, MT_2_7, width, MT_2_8, + width, MT_2_9, width, MT_2_10, width,MT_2_11, + width, MT_2_12, width, MT_2_13, width, MT_2_14 + ); + return s; +}; + +void oled_task_user(void) { + render_logo(); + oled_set_cursor(0,3); + if (rgbToggled) { + char *s = make_rgb_text(); + oled_write_ln_P(s, false); + free(s); + } else if (altToggled) { + char *s = make_alt_text(); + oled_write_ln_P(s, false); + free(s); + } else { + char *s = make_menu_text(); + oled_write_ln_P(s, false); + free(s); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case RGB_LAYER: + if (record->event.pressed) { + if (rgbToggled) { + rgbToggled = false; + altToggled = false; + layer_clear(); + } else { + rgbToggled = true; + altToggled = false; + layer_on(_RGB); + } + } + return false; + case ALT_LAYER: + if (record->event.pressed) { + if (altToggled) { + rgbToggled = false; + altToggled = false; + layer_clear(); + } else { + rgbToggled = false; + altToggled = true; + layer_on(_ALT); + } + } + return false; + default: + return true; + } + return false; +} diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/readme.md b/keyboards/dekunukem/duckypad/keymaps/m4cs/readme.md new file mode 100644 index 0000000000..42fae00440 --- /dev/null +++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/readme.md @@ -0,0 +1,25 @@ +[M4cs'](https://github.com/M4cs) duckyPad Layout + +### Layers: + +0: Default Layer w/ Media Functionality and Macros + +1: RGB Menu that allows RGB customization + +2: Alternate Macro Menu + +### Configuration: + +To change the menu, edit the `MT_X_XX` values in `config.h`. The sytax is as follows: `MT_A_B`, where A equals the layer, and B equals the key from 0-14. + +### Misc. Info: + +The macros currently just map to Ctrl + Alt + (Different Keys) right now. I have them launching certain shortcuts. I recommend you change these and add your shortcuts to match your shortcut manager. + +### Need Help? + +Contact me on discord: macs#0420 + +or join the duckyPad Discord and find me in there :) + +https://discord.gg/ADtrCjf
\ No newline at end of file diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/rules.mk b/keyboards/dekunukem/duckypad/keymaps/m4cs/rules.mk new file mode 100644 index 0000000000..8706546668 --- /dev/null +++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/rules.mk @@ -0,0 +1,2 @@ +LTO_ENABLE = yes # Enable Link Time Optimization +NO_USB_STARTUP_CHECK = yes # Disables usb suspend check after keyboard startup diff --git a/keyboards/dekunukem/duckypad/mcuconf.h b/keyboards/dekunukem/duckypad/mcuconf.h new file mode 100644 index 0000000000..201db101dc --- /dev/null +++ b/keyboards/dekunukem/duckypad/mcuconf.h @@ -0,0 +1,178 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF +// #define STM32F070xB + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_HSI48_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/dekunukem/duckypad/readme.md b/keyboards/dekunukem/duckypad/readme.md new file mode 100644 index 0000000000..581f52c899 --- /dev/null +++ b/keyboards/dekunukem/duckypad/readme.md @@ -0,0 +1,16 @@ +#  + +A 15 Key Macropad w/ RGB and OLED + +* Keyboard Maintainer: [M4cs](https://github.com/M4cs) and [half-cambodian-hacker-man](https://github.com/half-cambodian-hacker-man) +* Hardware Supported: All duckyPad Revisions + +Make example for this keyboard (after setting up your build environment): + + make dekunukem/duckypad:default + +Flashing example for this keyboard: + + make dekunukem/duckypad:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dekunukem/duckypad/rules.mk b/keyboards/dekunukem/duckypad/rules.mk new file mode 100644 index 0000000000..8251ab3646 --- /dev/null +++ b/keyboards/dekunukem/duckypad/rules.mk @@ -0,0 +1,24 @@ +# MCU Name +MCU = STM32F072 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +WS2812_DRIVER = bitbang +RGB_MATRIX_ENABLE = WS2812 + +OLED_DRIVER_ENABLE = yes |