diff options
Diffstat (limited to 'keyboards/deltasplit75/readme.md')
| -rw-r--r-- | keyboards/deltasplit75/readme.md | 137 |
1 files changed, 9 insertions, 128 deletions
diff --git a/keyboards/deltasplit75/readme.md b/keyboards/deltasplit75/readme.md index 04ed35c29e..a1e35e3378 100644 --- a/keyboards/deltasplit75/readme.md +++ b/keyboards/deltasplit75/readme.md @@ -1,137 +1,18 @@ DeltaSplit75 ====== -This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ and https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split +A split 75% keyboard made by xyxjj. [More info on qmk.fm](http://qmk.fm/deltasplit75/) -Credit to ahtn and wootpatoot for work on the split keyboard firmware +Keyboard Maintainer: [xyxjj](https://github.com/xyxjj) +Hardware Supported: Pro Micro +Hardware Availability: Group Buy -Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 -based boards. +Make example for this keyboard (after setting up your build environment): -## Case Files -Files are available here: https://github.com/xyxjj/DeltaSplit75-Case-files + make deltasplit75-v2-default -## Build Guide -The build guide should be found at https://qmk.fm/deltasplit75 +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +Files are available here: [DeltaSplit75 Case Files](https://github.com/xyxjj/DeltaSplit75-Case-files) -## First Time Setup - -Download or clone the whole firmware and navigate to the keyboards/deltasplit75 directory. Once your dev env is setup, you'll be able to generate the .hex using: - -``` -make v2 - -or - -make v2-YOUR_KEYMAP_NAME (if you make a folder for your keymap) - -or - -make protosplit (if you have one of the prototype PCBs) -``` - -You will see a lot of output and if everything worked correctly you will see the built hex files: - -``` -deltasplit75_v2_protosplit.hex - -or - -deltasplit74_v2_YOUR_KEYMAP_NAME.hex - -or - -deltasplit75_v2_default.hex - -``` - - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. - -### DeltaSplit75 V2 -The PCBs available in groupbuy are all v2, if you've bought one of my prototype PCBs (it says DeltaSplit65 on the silkscreen instead of 75), use the code make protosplit instead - -Features --------- - -For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). - -Some features supported by the firmware: - -* Either half can connect to the computer via USB, or both halves can be used - independently. -* 75% formfactor -* Support for multiple Bottom Rows -* RGB underglow support -* Split Backspace and ISO support - - -Flashing -------- -I personally use xLoader to upload my hex files to the keyboard, though any other working software is fine too - - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) - -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. - -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. - - -Notes on Using Pro Micro 3.3V ------------------------------ - -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. - -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: - -``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. -``` +The build guide should be found here: [DeltaSplit75 Build Guide](http://qmk.fm/deltasplit75/) |