summaryrefslogtreecommitdiff
path: root/keyboards/ferris/sweep/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ferris/sweep/readme.md')
-rw-r--r--keyboards/ferris/sweep/readme.md34
1 files changed, 29 insertions, 5 deletions
diff --git a/keyboards/ferris/sweep/readme.md b/keyboards/ferris/sweep/readme.md
index a8cbf8fd80..332ab2c790 100644
--- a/keyboards/ferris/sweep/readme.md
+++ b/keyboards/ferris/sweep/readme.md
@@ -8,9 +8,8 @@ A version of the Ferris keyboard that uses a daughterboard, designed by the fant
## Keyboard Info
* Keyboard Maintainer: [Pierre Chevalier](https://github.com/pierrechevalier83)
-* Hardware Supported:
- * Ferris sweep (With pro-micro. Comes in a couple of PCB edge cuts shapes, but with identical pinout)
-* Hardware Availability: @iamnotyourbroom in the 40% discord chat server may have some spares for you.
+* Hardware Supported: [Sweep](https://github.com/davidphilipbarr/Sweep) (all versions)
+* Hardware Availability: Print the PCB with gerber files from the repository
Make example for this keyboard (after setting up your build environment):
@@ -20,18 +19,43 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
## Setting Handedness
-Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are:
+Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands for Pro micros are:
make ferris/sweep:default:avrdude-split-left
make ferris/sweep:default:avrdude-split-right
+For Elite-C or compatible controllers using `DFU` bootloader, add the line `BOOTLOADER = atmel-dfu` into the user keymap `rules.mk` file and use the following make commands:
+
+ make ferris/sweep:default:dfu-split-left
+ make ferris/sweep:default:dfu-split-right
+
[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand
## Bootloader
Enter the bootloader in 3 ways:
-* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
+* **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side.
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
+## Swapped Pins
+
+If you printed one of the PCB variant with swapped letters `Q` and `B` / `P` and `N`, add the following code to your keymap's `config.h` to swap pins `E6` and `D7` in the firmware:
+```c
+#undef DIRECT_PINS
+#define DIRECT_PINS { \
+ { D7, F7, F6, F5, F4 }, \
+ { B1, B3, B2, B6, D3 }, \
+ { D1, D0, D4, C6, E6 }, \
+ { B4, B5, NO_PIN, NO_PIN, NO_PIN } \
+}
+#undef DIRECT_PINS_RIGHT
+#define DIRECT_PINS_RIGHT { \
+ { F4, F5, F6, F7, D7 }, \
+ { D3, B6, B2, B3, B1 }, \
+ { E6, C6, D4, D0, D1 }, \
+ { B5, B4, NO_PIN, NO_PIN, NO_PIN } \
+}
+```
+