diff options
Diffstat (limited to 'keyboards/freyr/config.h')
| -rw-r--r-- | keyboards/freyr/config.h | 108 |
1 files changed, 92 insertions, 16 deletions
diff --git a/keyboards/freyr/config.h b/keyboards/freyr/config.h index ce30fd5344..a4e34ea477 100644 --- a/keyboards/freyr/config.h +++ b/keyboards/freyr/config.h @@ -20,15 +20,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0002 -#define MANUFACTURER HnahKB -#define PRODUCT Freyr -#define DESCRIPTION Custom PCB TKL keyboard +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1895 +#define DEVICE_VER 0x0002 +#define MANUFACTURER HnahKB +#define PRODUCT Freyr /* key matrix size */ -#define MATRIX_ROWS 10 +#define MATRIX_ROWS 10 #define MATRIX_COLS 10 /* @@ -40,26 +39,103 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * -*/ + */ #define MATRIX_ROW_PINS { D3, B2, B1, B0, E6, F0, D2, D5, F4, F1 } #define MATRIX_COL_PINS { B4, D7, D6, D4, B5, C7, C6, F5, F6, F7 } #define UNUSED_PINS -/* COL2ROW, ROW2COL*/ +/* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ - #define BACKLIGHT_PIN B6 -#define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_BREATHING +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + /* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 |