diff options
Diffstat (limited to 'keyboards/handwired')
9 files changed, 539 insertions, 0 deletions
diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h new file mode 100644 index 0000000000..59300e0d27 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/config.h @@ -0,0 +1,249 @@ +/* +Copyright 2019 Vladislav Opara <Deckweiss75@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0690 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MMO_Corp +#define PRODUCT hacked_motospeed +#define DESCRIPTION Motospeed Numpads wired to Teensy++2.0 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// WR XR YR ZR VR ZL YL XL WL VL +#define MATRIX_ROW_PINS { B3, B5, F1, B4, B6, D5, D4, D6, D7, C4} + +// ER DR CR BR AR FR FL AL BL CL DL EL +#define MATRIX_COL_PINS { F7, F6, F5, F4, F3, F2, E0, E1, C0, C1, C2, C3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +//#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0
\ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/hacked_motospeed.c b/keyboards/handwired/hacked_motospeed/hacked_motospeed.c new file mode 100644 index 0000000000..21643895d7 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/hacked_motospeed.c @@ -0,0 +1,43 @@ +/* Copyright 2019 Vladislav Opara <Deckweiss75@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "hacked_motospeed.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +}
\ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/hacked_motospeed.h b/keyboards/handwired/hacked_motospeed/hacked_motospeed.h new file mode 100644 index 0000000000..1063fd2e62 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/hacked_motospeed.h @@ -0,0 +1,46 @@ +/* Copyright 2019 Vladislav Opara <Deckweiss75@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + EWR, DWR, CWR, BWR, AWR, FXR, FYL, AZL, BZL, CZL, DZL, \ + DXR, CXR, BXR, AXR, FZR, DVL, AYL, BYL, CYL, DYL, EZL, \ + EZR, DYR, CYR, BYR, AYR, DVR, FZL, AXL, BXL, CXL, DXL, \ + DZR, CZR, BZR, AZR, FYR, FXL, AWL, BWL, CWL, DWL, EWL \ +) \ +{ \ + { EWR, DWR, CWR, BWR, AWR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, DXR, CXR, BXR, AXR, FXR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, DYR, CYR, BYR, AYR, FYR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { EZR, DZR, CZR, AZR, BZR, FZR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, DVR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FZL, BZL, AZL, CZL, DZL, EZL }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FYL, AYL, BYL, CYL, DYL, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FXL, AXL, BXL, CXL, DXL, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, AWL, BWL, CWL, DWL, EWL }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, DVL, KC_NO } \ +} diff --git a/keyboards/handwired/hacked_motospeed/info.json b/keyboards/handwired/hacked_motospeed/info.json new file mode 100644 index 0000000000..7ca92785eb --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Hacked Motospeed", + "url": "", + "maintainer": "Deckweiss", + "width": 13, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [{"label":"ESC", "x":0, "y":0, "h":2}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Z", "x":7, "y":0}, {"label":"U", "x":8, "y":0}, {"label":"I", "x":9, "y":0}, {"label":"O", "x":10, "y":0}, {"label":"P", "x":11, "y":0, "w":2}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":7, "y":1}, {"label":"J", "x":8, "y":1}, {"label":"K", "x":9, "y":1}, {"label":"L", "x":10, "y":1}, {"label":"(", "x":11, "y":1}, {"label":")", "x":12, "y":1}, {"label":"=", "x":0, "y":2}, {"label":"Y", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":7, "y":2}, {"label":"M", "x":8, "y":2}, {"label":",", "x":9, "y":2}, {"label":".", "x":10, "y":2}, {"label":"?", "x":11, "y":2}, {"label":"Fn", "x":0, "y":3, "w":2}, {"label":"Num", "x":2, "y":3}, {"label":"Bksp", "x":3, "y":3}, {"label":"Enter", "x":4, "y":3}, {"label":"Spc", "x":5, "y":3}, {"label":"LShift", "x":7, "y":3}, {"label":"LCtrl", "x":8, "y":3}, {"label":"LAlt", "x":9, "y":3}, {"label":"RAlt", "x":10, "y":3}, {"label":"Meta", "x":11, "y":3}, {"label":"Fn", "x":12, "y":2, "h":2}] + } + } +}
\ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/keymaps/default/config.h b/keyboards/handwired/hacked_motospeed/keymaps/default/config.h new file mode 100644 index 0000000000..72de214ba7 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 Vladislav Opara <Deckweiss75@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here
\ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/keymaps/default/keymap.c b/keyboards/handwired/hacked_motospeed/keymaps/default/keymap.c new file mode 100644 index 0000000000..bdec8f2461 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/keymaps/default/keymap.c @@ -0,0 +1,65 @@ +/* Copyright 2019 Vladislav Opara <Deckweiss75@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_LPRN, KC_RPRN, \ + KC_PEQL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_QUES, \ + XXXXXXX, XXXXXXX, KC_BSPC, KC_ENT, KC_SPC, KC_LSFT, KC_LCTRL, KC_LALT, KC_ALGR, KC_LWIN, XXXXXXX \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +}
\ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/keymaps/default/readme.md b/keyboards/handwired/hacked_motospeed/keymaps/default/readme.md new file mode 100644 index 0000000000..4c740bd9a5 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for hacked_motospeed
\ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/readme.md b/keyboards/handwired/hacked_motospeed/readme.md new file mode 100644 index 0000000000..ac2d4afc28 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/readme.md @@ -0,0 +1,23 @@ +# hacked_motospeed + +This is a + - tiny (44key), + - budget (~50€ total expense), + - portable (HID bluetooth & 5aH battery) + - easy to diy (little wiring & soldering needed), + +mechanical keyboard. +It is made by wiring two Motospeed K22 numpads to a Teensy++ 2.0, while reusing as much of the original PCB as possible. +The numpads come with Outemu red linear switches. +(A detailed guide will be posted and linked later) + + +Keyboard Maintainer: [Deckweiss](https://github.com/Deckweiss) +Hardware Supported: Motospeed K22 numpads wired to Teensy++ 2.0 according to my guide (upcoming). +Hardware Availability: Ebay, AliExpress + +Make example for this keyboard (after setting up your build environment): + + make handwired/hacked_motospeed:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk new file mode 100644 index 0000000000..1dc955718f --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/rules.mk @@ -0,0 +1,81 @@ +# MCU name +MCU = at90usb1286 +#MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = halfkay + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=1024 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
\ No newline at end of file |