diff options
Diffstat (limited to 'keyboards/handwired')
| -rw-r--r-- | keyboards/handwired/datahand/config.h | 87 | ||||
| -rw-r--r-- | keyboards/handwired/datahand/datahand.h | 133 | ||||
| -rw-r--r-- | keyboards/handwired/datahand/keymaps/default/keymap.c | 313 | ||||
| -rw-r--r-- | keyboards/handwired/datahand/matrix.c | 125 | ||||
| -rw-r--r-- | keyboards/handwired/datahand/readme.md | 15 | ||||
| -rw-r--r-- | keyboards/handwired/datahand/rules.mk | 59 |
6 files changed, 732 insertions, 0 deletions
diff --git a/keyboards/handwired/datahand/config.h b/keyboards/handwired/datahand/config.h new file mode 100644 index 0000000000..1ba8479f0a --- /dev/null +++ b/keyboards/handwired/datahand/config.h @@ -0,0 +1,87 @@ +/* Copyright 2017-2019 Nikolaus Wittenstein <nikolaus.wittenstein@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR + * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +/* Taken from the DataHand PS/2-USB adaptor. */ +#define VENDOR_ID 0x13BA +#define PRODUCT_ID 0x0017 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DataHand +#define PRODUCT DataHand +#define DESCRIPTION DataHand Teensy++ 2.0 conversion + +/* key matrix size */ +#define MATRIX_ROWS 13 +#define MATRIX_COLS 4 + +#define DIODE_DIRECTION CUSTOM_MATRIX + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 0 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + */ +#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Command/Windows key option + * + * If you define this, the thumb enter key becomes the Command/Windows key. There's still an enter key on the right + * ring finger, so this key is much better utilized as the otherwise nonexistent Command key. I think some newer + * DataHands let you remap right ring east as Command, but having it on the thumb is nicer. Comment out this define + * to use the original layout. + */ +#define DATAHAND_THUMB_RETURN_COMMAND diff --git a/keyboards/handwired/datahand/datahand.h b/keyboards/handwired/datahand/datahand.h new file mode 100644 index 0000000000..cb9a4d3e3b --- /dev/null +++ b/keyboards/handwired/datahand/datahand.h @@ -0,0 +1,133 @@ +/* Copyright 2017-2019 Nikolaus Wittenstein <nikolaus.wittenstein@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR + * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. + */ + +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * The first section contains all of the arguements; the second converts the arguments into a two-dimensional array. + */ + +/* Each code is three letters + * l or r - left or right hand + * p, r, m, i, t - pinky, ring finger, middle finger, index finger, thumb + * fingers: n, s, e, w, c - north, south, east, west, and center (manual calls this "well" but we already have "west") + * thumb: p, n, c, l, u, k - pad, nail, center, lock (harder center), up, knuckle + */ +#define LAYOUT( \ + lpn, lrn, lmn, lin, rin, rmn, rrn, rpn, \ +lpw, lpc, lpe, lrw, lrc, lre, lmw, lmc, lme, liw, lic, lie, riw, ric, rie, rmw, rmc, rme, rrw, rrc, rre, rpw, rpc, rpe, \ + lps, lrs, lms, lis, ris, rms, rrs, rps, \ + ltp, ltn, rtn, rtp, \ + ltc, rtc, \ + ltl, rtl, \ + ltu, ltk, rtk, rtu) \ +{ \ + {riw, rin, lpw, lpn},\ + {ric, rie, lpc, lpe},\ + {ris, rms, lps, lrs},\ + {rmw, rmn, lrw, lrn},\ + {rmc, rme, lrc, lre},\ + {rrw, rrn, lmw, lmn},\ + {rrc, rre, lmc, lme},\ + {rrs, rps, lms, lis},\ + {rpw, rpn, liw, lin},\ + {rpc, rpe, lic, lie},\ + {rtk, rtn, ltk, ltn},\ + {rtc, rtl, ltc, ltl},\ + {rtp, rtu, ltp, ltu},\ +} + +/* Mode LEDs are active-low on Port B on the Teensy. */ +#define LED_MODE_PORT PORTB +#define LED_TENKEY (1<<3) +#define LED_FN (1<<4) +#define LED_NORMAL (1<<5) +#define LED_NAS (1<<6) + +/* Lock LEDs are active-low on Port F on the Teensy. */ +#define LED_LOCK_PORT PORTF +#define LED_CAPS_LOCK (1<<4) +#define LED_MOUSE_LOCK (1<<5) +#define LED_NUM_LOCK (1<<6) +#define LED_SCROLL_LOCK (1<<7) + + +/* Appendix: + * Table based on https://geekhack.org/index.php?topic=12212.msg2059319#msg2059319 + * Some pin assignments (e.g. for PS/2 I/O) have been fixed. + * + * Teensy Datahand 8051 pin pin 8051 Datahand Teensy + * ------ -------- ---- --- --- ---- -------- ------ + * GND Mtrx send A P1.0 1 40 VCC VCC VCC + * PB7 Mtrx send B P1.1 2 39 P0.0 LED RH NAS PB6 + * PD0 Mtrx send C P1.2 3 38 P0.1 LED RH NORM PB5 + * PD1 Mtrx send D P1.3 4 37 P0.2 LED RH FCTN PB4 + * PD2 RH rcv 0 P1.4 5 36 P0.3 LED RH 10K PB3 + * PD3 RH rcv 1 P1.5 6 35 P0.4 LED RH unused PB2 + * PD4 LH rcv 0 P1.6 7 34 P0.5 LED RH unused PE1 + * PD5 LH rcv 1 P1.7 8 33 P0.6 LED RH unused PE0 + * PD6 Reset button RST 9 32 P0.7 ? PE7 + * PD7 ? P3.0 10 31 VPP - PE6 + * PE0 ? P3.1 11 30 ALE - GND + * PE1 kbd data P3.2 12 29 PSEN - AREF + * PC0 ? P3.3 13 28 P2.7 ? PF0 + * PC1 kbd clk P3.4 14 27 P2.6 ? PF1 + * PC2 ? P3.5 15 26 P2.5 ? PF2 + * PC3 RAM P3.6 16 25 P2.4 ? PF3 + * PC4 RAM P3.7 17 24 P2.3 LED D15 LH (CAPLK) PF4 + * PC5 XTAL2 XTAL2 18 23 P2.2 LED D13 LH (MSELK) PF5 + * PC6 XTAL1 XTAL1 19 22 P2.1 LED D6 LH (NUMLK) PF6 + * PC7 GND GND 20 21 P2.0 LED D14 LH (SCRLK) PF7 + * + * JP3 Pinout + * 2 - keyboard data + * 3 - keyboard clock + * + * In order to get the Teensy to work, we need to move pin 1 to a different pin. This is + * because on the Teensy pin 1 is ground, but we need to write to pin 1 in order to read + * the keyboard matrix. An ideal pin to move it to is VPP (pin 31), because this pin tells + * the 8051 whether it should read from external or internal memory. The Teensy doesn't + * care about that. + * + * The easiest way to reassign the pin is to use standoffs. You can check out this thread: + * https://geekhack.org/index.php?topic=12212.msg235382#msg235382 for a picture of what + * this looks like. Note that in the picture the pin has been reassigned to pin 12. We + * don't want to do that because we're going to use that pin to send data over PS/2. + * + * We could if we wanted also reassign the PS/2 pins to Teensy hardware UART pins, but + * that's more work. Instead we'll just bit-bang PS/2 because it's an old, slow protocol + * (and because there's already a bit-banged PS/2 host implementation in QMK - we just + * need to add the device side). + * + * So overall, we want the following inputs and outputs: + * Outputs: + * Matrix: + * PB7 + * PD0 + * PD1 + * PE6 (moved from pin1, GND) + * LEDs: + * PB3-6 + * PF4-7 + * Inputs: + * Matrix: + * PD2-5 + * I/Os (start up as inputs): + * PS/2: + * PC1 + * PE1 + */ diff --git a/keyboards/handwired/datahand/keymaps/default/keymap.c b/keyboards/handwired/datahand/keymaps/default/keymap.c new file mode 100644 index 0000000000..8f44535594 --- /dev/null +++ b/keyboards/handwired/datahand/keymaps/default/keymap.c @@ -0,0 +1,313 @@ +/* Copyright 2017-2019 Nikolaus Wittenstein <nikolaus.wittenstein@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR + * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. + */ + +#include QMK_KEYBOARD_H + +#include <stdbool.h> + +/* Datahand features not supported: + * * All online reprogramming (user settings using the reset button). + * * Program Selection features. + * * Macros. + * * Direct substitutions. + * * L/R Modf. + * * Mouse Click Lock (Function Direct Access + Mouse Button key). + * * Different mouse movement speeds with the two pointer fingers, and using both pointer fingers to move even faster. + * + * As far as I know, everything else works. + */ + +enum layer { + NORMAL, +#ifdef DATAHAND_THUMB_RETURN_COMMAND + NORMAL_THUMB_RETURN_COMMAND, +#endif + FUNCTION_MOUSE, + FUNCTION_ARROWS, + NAS, + NAS_NUMLOCK, + NAS_TENKEY, + NAS_TENKEY_NUMLOCK, + + NUM_LAYERS +}; + +enum custom_keycodes { + N = SAFE_RANGE, /* Normal */ + NS, /* NAS */ + NSL, /* NAS Lock */ + NLK, /* Numlock */ + FN, /* Function mode - needs to be able to switch to mouse or arrow layer */ + TK0, /* Ten-key off button */ + TK1, /* Ten-key on button */ + AR, /* FN arrow mode */ + MS, /* FN mouse mode */ + DZ, /* Double zero button */ +}; + +static bool mouse_enabled = true; +static bool tenkey_enabled = false; +static bool numlock_enabled = false; +static bool nas_locked = false; + +/* Declared weak so that it can easily be overridden. */ +__attribute__((weak)) const uint16_t PROGMEM keymaps[NUM_LAYERS][MATRIX_ROWS][MATRIX_COLS] = { +[NORMAL] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_U, KC_I, KC_O, KC_P, +KC_DEL, KC_A, KC_LBRC, KC_ESC, KC_S, KC_B, KC_GRV, KC_D, KC_T, KC_DQT, KC_F, KC_G, KC_H, KC_J, KC_QUOT, KC_Y, KC_K, KC_COLN, KC_N, KC_L, KC_ENT, KC_RBRC, KC_SCLN, KC_BSLS, + KC_Z, KC_X, KC_C, KC_V, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_ENT, KC_TAB, KC_BSPC, KC_SPC, + KC_LSFT, NS, + KC_CAPS, NSL, + N, KC_LCTL, KC_LALT, FN), + +#ifdef DATAHAND_THUMB_RETURN_COMMAND +[NORMAL_THUMB_RETURN_COMMAND] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, + KC_LCMD, _______, _______, _______, + _______, _______, + _______, _______, + _______, _______, _______, _______), +#endif + +[FUNCTION_MOUSE] = LAYOUT( + KC_F2, KC_F4, KC_F6, KC_MS_U, KC_MS_U, KC_F8, KC_F10, KC_PGUP, +_______, KC_NO, KC_SLCK, _______, KC_BTN3, NLK, KC_BTN1, MS, KC_BTN2, KC_MS_L, KC_BTN1, KC_MS_R, KC_MS_L, KC_BTN2, KC_MS_R, KC_END, AR, KC_LSFT, KC_INS, KC_9, KC_ENT, KC_F11, KC_0, KC_F12, + KC_F1, KC_F3, KC_F5, KC_MS_D, KC_MS_D, KC_F7, KC_F9, KC_PGDN, + _______, _______, _______, _______, + _______, _______, + _______, _______, + _______, _______, _______, _______), +[FUNCTION_ARROWS] = LAYOUT( + _______, _______, _______, KC_UP, KC_UP, _______, _______, _______, +_______, _______, _______, _______, KC_LCTL, _______, _______, _______, _______, KC_LEFT, KC_HOME, KC_RGHT, KC_LEFT, KC_HOME, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_DOWN, KC_DOWN, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, + _______, _______, + _______, _______, _______, _______), +[NAS] = LAYOUT( + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, +_______, KC_1, KC_TILD, _______, KC_2, NLK, KC_LABK, KC_3, KC_RABK, KC_SLSH, KC_4, KC_5, KC_6, KC_7, KC_UNDS, KC_CIRC, KC_8, KC_ENT, KC_SCLN, KC_9, KC_BSLS, TK0, KC_0, TK1, + KC_EQL, KC_X, KC_PERC, KC_MINS, KC_PLUS, KC_DOT, KC_SLSH, KC_QUES, + _______, _______, _______, _______, + _______, _______, + _______, _______, + _______, _______, _______, _______), +[NAS_NUMLOCK] = LAYOUT( + _______, _______, _______, _______, _______, KC_PAST, _______, _______, +_______, KC_KP_1, _______, _______, KC_KP_2, _______, _______, KC_KP_3, _______, KC_PSLS, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_7, _______, _______, KC_KP_8, _______, _______, KC_KP_9, KC_PENT, _______, KC_KP_0, _______, + KC_PEQL, _______, _______, KC_PMNS, KC_PPLS, _______, KC_PDOT, _______, + _______, _______, _______, _______, + _______, _______, + _______, _______, + _______, _______, _______, _______), +[NAS_TENKEY] = LAYOUT( + _______, _______, _______, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, +_______, KC_QUOT, _______, _______, KC_DLR, _______, _______, KC_AMPR, _______, KC_LEFT, KC_HOME, KC_RGHT, KC_0, KC_4, DZ, KC_PLUS, KC_5, KC_MINS, KC_EQL, KC_6, KC_ENT, _______, KC_DOT, _______, + KC_LPRN, KC_RPRN, _______, KC_DOWN, KC_1, KC_2, KC_3, KC_SLSH, + _______, _______, _______, _______, + _______, _______, + _______, _______, + _______, _______, _______, _______), +[NAS_TENKEY_NUMLOCK] = LAYOUT( + _______, _______, _______, _______, KC_KP_7, KC_KP_8, KC_KP_9, KC_PAST, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_KP_0, KC_KP_4, _______, KC_PPLS, KC_KP_5, KC_PMNS, KC_PEQL, KC_KP_6, KC_PENT, _______, KC_PDOT, _______, + _______, _______, _______, _______, KC_KP_1, KC_KP_2, KC_KP_3, KC_PSLS, + _______, _______, _______, _______, + _______, _______, + _______, _______, + _______, _______, _______, _______), +}; + +static void lock_led_set(bool on, uint8_t led) { + if (on) { + LED_LOCK_PORT &= ~led; + } else { + LED_LOCK_PORT |= led; + } +} + +static void mode_led_set(uint8_t led) { + static const uint8_t ALL_MODE_LEDS = LED_FN | LED_NORMAL | LED_NAS | LED_TENKEY; + LED_MODE_PORT |= ALL_MODE_LEDS; + LED_MODE_PORT &= ~led; +} + +static void layer_set(bool on, uint8_t layer) { + if (on) { + layer_on(layer); + } else { + layer_off(layer); + } + + if (layer_state_is(NAS) || layer_state_is(NAS_NUMLOCK) || layer_state_is(NAS_TENKEY) || layer_state_is(NAS_TENKEY_NUMLOCK)) { + if (tenkey_enabled) { + mode_led_set(LED_NAS | LED_TENKEY); + } else { + mode_led_set(LED_NAS); + } + } else if (layer_state_is(FUNCTION_MOUSE) || layer_state_is(FUNCTION_ARROWS)) { + mode_led_set(LED_FN); + } else if (layer_state_is(NORMAL)) { + mode_led_set(LED_NORMAL); + } +} + +static void set_normal(void) { + layer_move(NORMAL); + +#ifdef DATAHAND_THUMB_RETURN_COMMAND + layer_set(true, NORMAL_THUMB_RETURN_COMMAND); +#endif + + /* Then call layer_set to update LEDs. */ + layer_set(true, NORMAL); +} + +static void set_nas(bool on) { + /* Always turn on the base NAS layer so other layers can fall through. */ + layer_set(on, NAS); + + layer_set(on && numlock_enabled, NAS_NUMLOCK); + layer_set(on && tenkey_enabled, NAS_TENKEY); + layer_set(on && tenkey_enabled && numlock_enabled, NAS_TENKEY_NUMLOCK); +} + +static void set_tenkey(bool on) { + tenkey_enabled = on; + + /* We have to be on the NAS layer in order to be able to toggle TK. + * Re-toggle it on so that we move to the right layer (and set the right LED). + */ + set_nas(true); +} + +static void toggle_numlock(void) { + numlock_enabled = !numlock_enabled; + lock_led_set(numlock_enabled, LED_NUM_LOCK); + + if (layer_state_is(NAS)) { + /* If we're already in NAS, re-set it so that we activate the numlock layer. */ + set_nas(true); + } +} + +static void set_function(void) { + /* Make sure to turn off NAS if we're entering function */ + set_nas(false); + + /* Always turn on the mouse layer so the arrow layer can fall through. */ + layer_set(true, FUNCTION_MOUSE); + layer_set(!mouse_enabled, FUNCTION_ARROWS); +} + +static void set_mouse_enabled(bool on) { + mouse_enabled = on; + + /* Re-run set_function to set our layers correctly. */ + set_function(); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + bool pressed = record->event.pressed; + + switch(keycode) { + case N: + if (pressed) { + set_normal(); + } + break; + + case NS: + if (pressed) { + nas_locked = false; + } + set_nas(pressed); + break; + + case NSL: + if (pressed) { + nas_locked = true; + set_nas(true); + } + break; + + case NLK: + if (pressed) { + toggle_numlock(); + SEND_STRING(SS_DOWN(X_NUMLOCK)); + } else { + SEND_STRING(SS_UP(X_NUMLOCK)); + } + break; + + case FN: + if (pressed) { + set_function(); + } + break; + + case TK0: + if (pressed) { + set_tenkey(false); + } + break; + + case TK1: + if (pressed) { + set_tenkey(true); + } + break; + + case MS: + if (pressed) { + set_mouse_enabled(true); + } + break; + + case AR: + if (pressed) { + set_mouse_enabled(false); + } + break; + + case DZ: + if (pressed) { + SEND_STRING(SS_TAP(X_KP_0) SS_TAP(X_KP_0)); + } + break; + } + + return true; +}; + +void matrix_init_user(void) { +#ifdef DATAHAND_THUMB_RETURN_COMMAND + set_normal(); +#endif +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + lock_led_set(usb_led & (1<<USB_LED_NUM_LOCK), LED_NUM_LOCK); + lock_led_set(usb_led & (1<<USB_LED_CAPS_LOCK), LED_CAPS_LOCK); + lock_led_set(usb_led & (1<<USB_LED_SCROLL_LOCK), LED_SCROLL_LOCK); +} diff --git a/keyboards/handwired/datahand/matrix.c b/keyboards/handwired/datahand/matrix.c new file mode 100644 index 0000000000..a08450d779 --- /dev/null +++ b/keyboards/handwired/datahand/matrix.c @@ -0,0 +1,125 @@ +/* Copyright 2017-2019 Nikolaus Wittenstein <nikolaus.wittenstein@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR + * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. + */ + +#include "datahand.h" + +#include "matrix.h" +#include "action.h" + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> + +static matrix_row_t matrix[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void select_row(uint8_t row); + +void matrix_init(void) { + /* See datahand.h for more detail on pins. */ + + /* 7 - matrix scan; 6-3 - mode LEDs */ + DDRB = 0b11111000; + + /* 1-0 - matrix scan */ + DDRD = 0b00000011; + + /* 6 - matrix scan */ + DDRE = 0b01000000; + + /* 7-4 - lock LEDs */ + DDRF = 0b11110000; + + /* Turn off the non-Normal LEDs (they're active low). */ + PORTB |= LED_TENKEY | LED_FN | LED_NAS; + + /* Turn off the lock LEDs. */ + PORTF |= LED_CAPS_LOCK | LED_NUM_LOCK | LED_SCROLL_LOCK | LED_MOUSE_LOCK; + + matrix_init_user(); +} + +uint8_t matrix_scan(void) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + select_row(row); + /* The default hardware works down to at least 100us, but I have a replacement + * photodiode that responds a little more slowly. Cranking it up to 1000us fixes + * shadowing issues. + */ + _delay_us(1000); + matrix[row] = read_cols(); + } + + matrix_scan_user(); + + return 1; +} + +matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { + print("\nr/c 01234567\n"); + + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); + print(": "); + print_bin_reverse8(matrix_get_row(row)); + print("\n"); + } +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + return process_record_user(keycode, record); +} + +static void select_row(uint8_t row) { + /* Original 8051: P1 bits 0-3 (pins 1-4) + * Teensy++: PE0, PB7, PD0, PD1 + */ + + if (row & (1<<0)) { + PORTE |= (1<<6); + } else { + PORTE &= ~(1<<6); + } + + if (row & (1<<1)) { + PORTB |= (1<<7); + } else { + PORTB &= ~(1<<7); + } + + if (row & (1<<2)) { + PORTD |= (1<<0); + } else { + PORTD &= ~(1<<0); + } + + if (row & (1<<3)) { + PORTD |= (1<<1); + } else { + PORTD &= ~(1<<1); + } +} + +static matrix_row_t read_cols(void) { + /* Original 8051: P1 bits 4-7 (pins 5-8) + * Teensy++: PD bits 2-5 + */ + + return (PIND & 0b00111100) >> 2; +} diff --git a/keyboards/handwired/datahand/readme.md b/keyboards/handwired/datahand/readme.md new file mode 100644 index 0000000000..923cebb00e --- /dev/null +++ b/keyboards/handwired/datahand/readme.md @@ -0,0 +1,15 @@ +# DataHand + +A keyboard designed to prevent RSI. See [Wikipedia](https://en.wikipedia.org/wiki/DataHand) and [this website](http://octopup.org/computer/datahand) for more info. + +To use this firmware, you have to replace the stock microcontroller with a Teensy++ 2.0. This is relatively easy and also reversible. See the notes at the bottom of datahand.h for more info. + +Keyboard Maintainer: [Nikolaus Wittenstein](https://github.com/adzenith) +Hardware Supported: DataHand Personal or Pro II +Hardware Availability: No longer in production + +Make example for this keyboard (after setting up your build environment): + + make handwired/datahand:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/datahand/rules.mk b/keyboards/handwired/datahand/rules.mk new file mode 100644 index 0000000000..59f14e17a4 --- /dev/null +++ b/keyboards/handwired/datahand/rules.mk @@ -0,0 +1,59 @@ +# Project-specific includes +SRC = matrix.c + +# MCU name +MCU = at90usb1286 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +BOOTLOADER = halfkay + +# Build Options +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +CUSTOM_MATRIX = yes # We definitely have a nonstandard matrix + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend |