diff options
Diffstat (limited to 'keyboards/handwired')
8 files changed, 322 insertions, 0 deletions
diff --git a/keyboards/handwired/frankie_macropad/config.h b/keyboards/handwired/frankie_macropad/config.h new file mode 100644 index 0000000000..5047972d18 --- /dev/null +++ b/keyboards/handwired/frankie_macropad/config.h @@ -0,0 +1,155 @@ +/* +Copyright 2021 Eric Wood + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xF00D +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Eric Wood +#define PRODUCT frankie_macropad + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B0, B1, B2 } +#define MATRIX_COL_PINS { B3, B4, B5, B6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +// #define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +// #define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 2 +#define BOOTMAGIC_LITE_COLUMN 0 + +#define ENCODERS_PAD_A { D0, D2 } +#define ENCODERS_PAD_B { D1, D3 } diff --git a/keyboards/handwired/frankie_macropad/frankie_macropad.c b/keyboards/handwired/frankie_macropad/frankie_macropad.c new file mode 100644 index 0000000000..5f89811e7a --- /dev/null +++ b/keyboards/handwired/frankie_macropad/frankie_macropad.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Eric Wood + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "frankie_macropad.h" diff --git a/keyboards/handwired/frankie_macropad/frankie_macropad.h b/keyboards/handwired/frankie_macropad/frankie_macropad.h new file mode 100644 index 0000000000..cfd3124ba1 --- /dev/null +++ b/keyboards/handwired/frankie_macropad/frankie_macropad.h @@ -0,0 +1,39 @@ +/* Copyright 2021 Eric Wood + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define ___ KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23 \ +) { \ + { ___, ___, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, k23 } \ +} diff --git a/keyboards/handwired/frankie_macropad/info.json b/keyboards/handwired/frankie_macropad/info.json new file mode 100644 index 0000000000..ac8b65e28e --- /dev/null +++ b/keyboards/handwired/frankie_macropad/info.json @@ -0,0 +1,25 @@ +{ + "keyboard_name": "frankie_macropad", + "url": "https://github.com/eric-wood/macro-pad", + "maintainer": "eric-wood", + "width": 3, + "height": 2, + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "k02", "x": 2, "y": 0}, + {"label": "k03", "x": 3, "y": 0}, + + {"label": "k10", "x": 0, "y": 1}, + {"label": "k11", "x": 1, "y": 1}, + {"label": "k12", "x": 2, "y": 1}, + {"label": "k13", "x": 3, "y": 1}, + + {"label": "k20", "x": 0, "y": 2}, + {"label": "k21", "x": 1, "y": 2}, + {"label": "k22", "x": 2, "y": 2}, + {"label": "k23", "x": 3, "y": 2} + ] + } + } +} diff --git a/keyboards/handwired/frankie_macropad/keymaps/default/keymap.c b/keyboards/handwired/frankie_macropad/keymaps/default/keymap.c new file mode 100644 index 0000000000..02c1002aff --- /dev/null +++ b/keyboards/handwired/frankie_macropad/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2021 Eric Wood + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT( + KC_HOME, KC_MUTE, + KC_BRID, KC_BRIU, KC_NO, KC_NO, + KC_MPRV, KC_MPLY, KC_MNXT, KC_NO + ), +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_PGUP); + } else { + tap_code(KC_PGDN); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +} diff --git a/keyboards/handwired/frankie_macropad/keymaps/default/readme.md b/keyboards/handwired/frankie_macropad/keymaps/default/readme.md new file mode 100644 index 0000000000..f29affb872 --- /dev/null +++ b/keyboards/handwired/frankie_macropad/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for handwired/frankie_macropad diff --git a/keyboards/handwired/frankie_macropad/readme.md b/keyboards/handwired/frankie_macropad/readme.md new file mode 100644 index 0000000000..edd6965b51 --- /dev/null +++ b/keyboards/handwired/frankie_macropad/readme.md @@ -0,0 +1,21 @@ +# frankie_macropad + + + +A simple 8-key macropad with two rotary encoders. + +* Keyboard Maintainer: [Eric Wood](https://github.com/eric-wood) +* Hardware Supported: atmega16u2 +* Hardware Availability: https://github.com/eric-wood/macro-pad + +Make example for this keyboard (after setting up your build environment): + + make handwired/frankie_macropad:default + +To switch to bootloader mode, unplug the keyboard and plug it back in while holding down the bottom left key. + +Flashing example for this keyboard: + + make handwired/frankie_macropad:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/frankie_macropad/rules.mk b/keyboards/handwired/frankie_macropad/rules.mk new file mode 100644 index 0000000000..b5b6e39779 --- /dev/null +++ b/keyboards/handwired/frankie_macropad/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega16u2 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes +LTO_ENABLE = yes |