summaryrefslogtreecommitdiff
path: root/keyboards/helix
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/helix')
-rw-r--r--keyboards/helix/rev2/keymaps/yshrsmz/keymap.c159
-rw-r--r--keyboards/helix/rev2/keymaps/yshrsmz/rules.mk9
2 files changed, 140 insertions, 28 deletions
diff --git a/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c b/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c
index bd8796d064..d9102cb59f 100644
--- a/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c
+++ b/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c
@@ -1,24 +1,10 @@
#include QMK_KEYBOARD_H
-#include "bootloader.h"
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#include "split_util.h"
-#endif
-#ifdef AUDIO_ENABLE
- #include "audio.h"
-#endif
+#include <stdio.h>
+#include <string.h>
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
-
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
-extern uint8_t is_master;
-
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -415,7 +401,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
- RGB_current_mode = rgblight_config.mode;
+ RGB_current_mode = rgblight_get_mode();
}
#endif
return false;
@@ -449,7 +435,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
- RGB_current_mode = rgblight_config.mode;
+ RGB_current_mode = rgblight_get_mode();
}
#endif
break;
@@ -462,7 +448,7 @@ void matrix_init_user(void) {
startup_user();
#endif
#ifdef RGBLIGHT_ENABLE
- RGB_current_mode = rgblight_config.mode;
+ RGB_current_mode = rgblight_get_mode();
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
@@ -533,15 +519,15 @@ static void render_logo(struct CharacterMatrix *matrix) {
static void render_rgbled_status(bool full, struct CharacterMatrix *matrix) {
#ifdef RGBLIGHT_ENABLE
char buf[30];
- if (RGBLIGHT_MODES > 1 && rgblight_config.enable) {
+ if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) {
if (full) {
snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
- rgblight_config.mode,
- rgblight_config.hue/RGBLIGHT_HUE_STEP,
- rgblight_config.sat/RGBLIGHT_SAT_STEP,
- rgblight_config.val/RGBLIGHT_VAL_STEP);
+ rgblight_get_mode(),
+ rgblight_get_hue()/RGBLIGHT_HUE_STEP,
+ rgblight_get_sat()/RGBLIGHT_SAT_STEP,
+ rgblight_get_val()/RGBLIGHT_VAL_STEP);
} else {
- snprintf(buf, sizeof(buf), "[%2d] ",rgblight_config.mode);
+ snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode());
}
matrix_write(matrix, buf);
}
@@ -613,9 +599,9 @@ void iota_gfx_task_user(void) {
#endif
matrix_clear(&matrix);
- if(is_master){
+ if (is_keyboard_master()) {
render_status(&matrix);
- }else{
+ } else {
render_logo(&matrix);
render_rgbled_status(false, &matrix);
render_layer_status(&matrix);
@@ -623,4 +609,121 @@ void iota_gfx_task_user(void) {
matrix_update(&display, &matrix);
}
-#endif
+#endif // end of SSD1306OLED
+
+#ifdef OLED_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ if (is_keyboard_master()) {
+ return OLED_ROTATION_0;
+ } else {
+ return OLED_ROTATION_180;
+ }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER (1<<_LOWER)
+#define L_RAISE (1<<_RAISE)
+#define L_ADJUST (1<<_ADJUST)
+#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
+
+static void render_logo(void) {
+
+ static const char helix_logo[] PROGMEM ={
+ 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+ 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+ 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
+ 0};
+ oled_write_P(helix_logo, false);
+ //matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
+}
+
+static void render_rgbled_status(bool full) {
+# ifdef RGBLIGHT_ENABLE
+ char buf[30];
+ if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) {
+ if (full) {
+ snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
+ rgblight_get_mode(),
+ rgblight_get_hue()/RGBLIGHT_HUE_STEP,
+ rgblight_get_sat()/RGBLIGHT_SAT_STEP,
+ rgblight_get_val()/RGBLIGHT_VAL_STEP);
+ } else {
+ snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode());
+ }
+ oled_write(buf, false);
+ }
+# endif
+}
+
+static void render_layer_status(void) {
+ // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+ char buf[10];
+ oled_write_P(PSTR("Layer: "), false);
+ switch (layer_state) {
+ case L_BASE:
+ oled_write_P(PSTR("Default"), false);
+ break;
+ case L_RAISE:
+ oled_write_P(PSTR("Raise"), false);
+ break;
+ case L_LOWER:
+ oled_write_P(PSTR("Lower"), false);
+ break;
+ case L_ADJUST:
+ case L_ADJUST_TRI:
+ oled_write_P(PSTR("Adjust"), false);
+ break;
+ default:
+ oled_write_P(PSTR("Undef-"), false);
+ snprintf(buf,sizeof(buf), "%ld", layer_state);
+ oled_write(buf, false);
+ }
+ oled_write_P(PSTR("\n"), false);
+}
+
+void render_status(void) {
+ // Render to mode icon
+ static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
+ if (keymap_config.swap_lalt_lgui==false) {
+ oled_write_P(os_logo[0][0], false);
+ oled_write_P(PSTR("\n"), false);
+ oled_write_P(os_logo[0][1], false);
+ } else {
+ oled_write_P(os_logo[1][0], false);
+ oled_write_P(PSTR("\n"), false);
+ oled_write_P(os_logo[1][1], false);
+ }
+
+ oled_write_P(PSTR(" "), false);
+ render_layer_status();
+
+ // Host Keyboard LED Status
+ oled_write_P((host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ?
+ PSTR("NUMLOCK") : PSTR(" "), false);
+ oled_write_P((host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ?
+ PSTR("CAPS") : PSTR(" "), false);
+ oled_write_P((host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ?
+ PSTR("SCLK") : PSTR(" "), false);
+ oled_write_P(PSTR("\n"), false);
+ render_rgbled_status(true);
+ oled_write_P(PSTR("\n"), false);
+}
+
+bool oled_task_user(void) {
+# if DEBUG_TO_SCREEN
+ if (debug_enable) {
+ return;
+ }
+# endif
+
+ if (is_keyboard_master()) {
+ render_status();
+ } else {
+ render_logo();
+ render_rgbled_status(false);
+ render_layer_status();
+ }
+ return false;
+}
+#endif // end of OLED_ENABLE
diff --git a/keyboards/helix/rev2/keymaps/yshrsmz/rules.mk b/keyboards/helix/rev2/keymaps/yshrsmz/rules.mk
index cd436cd9a3..bc5190c706 100644
--- a/keyboards/helix/rev2/keymaps/yshrsmz/rules.mk
+++ b/keyboards/helix/rev2/keymaps/yshrsmz/rules.mk
@@ -6,6 +6,7 @@
# See TOP/docs/config_options.md for more information.
#
LTO_ENABLE = no # if firmware size over limit, try this option
+SPLIT_KEYBOARD = yes
# Helix Spacific Build Options
# you can uncomment and edit follows 7 Variables
@@ -17,3 +18,11 @@ OLED_ENABLE = yes # OLED_ENABLE
# LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = no # LED animations
# IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
+
+# OLED_ENABLE が yes のとき
+# OLED_SELECT が core ならば QMK 標準の oled_dirver.c を使用します。
+# OLED_SELECT が core 以外ならば従来どおり helix/local_drivers/ssd1306.c を使用します。
+# If OLED_ENABLE is 'yes'
+# If OLED_SELECT is 'core', use QMK standard oled_dirver.c.
+# If OLED_SELECT is other than 'core', use helix/local_drivers/ssd1306.c.
+OLED_SELECT = core
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-22 05:08:20 +0000