diff options
Diffstat (limited to 'keyboards/hineybush')
40 files changed, 2004 insertions, 116 deletions
diff --git a/keyboards/hineybush/h87a/config.h b/keyboards/hineybush/h87a/config.h index 245e6eda83..5a1e6d366c 100644 --- a/keyboards/hineybush/h87a/config.h +++ b/keyboards/hineybush/h87a/config.h @@ -16,10 +16,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xECE9 #define DEVICE_VER 0x0001 -#define MANUFACTURER hineybush +#define MANUFACTURER hineybush keyboards #define PRODUCT h87a #define DESCRIPTION QMK-programmable TKL PCB for custom keyboards diff --git a/keyboards/hineybush/h87a/keymaps/default/keymap.c b/keyboards/hineybush/h87a/keymaps/default/keymap.c index 6382af1eec..974a7e35bc 100644 --- a/keyboards/hineybush/h87a/keymaps/default/keymap.c +++ b/keyboards/hineybush/h87a/keymaps/default/keymap.c @@ -35,22 +35,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - void matrix_init_user(void) { } diff --git a/keyboards/hineybush/h87a/rules.mk b/keyboards/hineybush/h87a/rules.mk index dac21d72c8..653ec1f9a2 100644 --- a/keyboards/hineybush/h87a/rules.mk +++ b/keyboards/hineybush/h87a/rules.mk @@ -1,52 +1,15 @@ # MCU name -#MCU = at90usb1286 MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable @@ -67,4 +30,4 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -EXTRAFLAGS += -flto
\ No newline at end of file +EXTRAFLAGS += -flto diff --git a/keyboards/hineybush/h88/config.h b/keyboards/hineybush/h88/config.h new file mode 100644 index 0000000000..26d5189eb3 --- /dev/null +++ b/keyboards/hineybush/h88/config.h @@ -0,0 +1,78 @@ +/* +Copyright 2019 Josh Hinnebusch + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xECA2 +#define DEVICE_VER 0x0001 +#define MANUFACTURER hineybush keyboards +#define PRODUCT h88 +#define DESCRIPTION QMK-programmable TKL PCB for custom keyboards with an extra key in the F-row + + + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, D0, D1, B5, B6, D7, B4, D6, D4 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, D2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 24 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep +#endif diff --git a/keyboards/hineybush/h88/h88.c b/keyboards/hineybush/h88/h88.c new file mode 100644 index 0000000000..46d6393907 --- /dev/null +++ b/keyboards/hineybush/h88/h88.c @@ -0,0 +1,69 @@ +/* Copyright 2019 Josh Hinnebusch + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "h88.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +void led_init_ports(void) { + setPinOutput(D5); + setPinOutput(E6); +} + +void led_set_user(uint8_t usb_led) { + + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + setPinOutput(D5); + writePinLow(D5); + } else { + setPinInput(D5); + writePinLow(D5); + } + + if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + setPinOutput(E6); + writePinLow(E6); + } else { + setPinInput(E6); + writePinLow(E6); + } + +} + diff --git a/keyboards/hineybush/h88/h88.h b/keyboards/hineybush/h88/h88.h new file mode 100644 index 0000000000..f701529d18 --- /dev/null +++ b/keyboards/hineybush/h88/h88.h @@ -0,0 +1,90 @@ +/* Copyright 2019 Josh Hinnebusch + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define LAYOUT_all(\ + K000, K010, K001, K011, K002, K012, K003, K013, K004, K014, K015, K006, K016, K007, K017, K008, K018, \ + K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027, K037, K028, K038, \ + K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056, K057, K048, K058, \ + K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K066, K076, \ + K080, K090, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K086, K096, K088, \ + K100, K110, K101, K113, K105, K115, K106, K116, K117, K108, K118 \ +) { \ + { K000, K001, K002, K003, K004, KC_NO, K006, K007, K008 }, \ + { K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \ + { K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \ + { K030, K031, K032, K033, K034, K035, K036, K037, K038 }, \ + { K040, K041, K042, K043, K044, K045, K046, KC_NO, K048 }, \ + { K050, K051, K052, K053, K054, K055, K056, K057, K058 }, \ + { K060, K061, K062, K063, K064, K065, K066, KC_NO, KC_NO }, \ + { K070, K071, K072, K073, K074, K075, K076, KC_NO, KC_NO }, \ + { K080, K081, K082, K083, K084, K085, K086, KC_NO, K088 }, \ + { K090, K091, K092, K093, K094, K095, K096, KC_NO, KC_NO }, \ + { K100, K101, KC_NO, KC_NO, KC_NO, K105, K106, KC_NO, K108 }, \ + { K110, KC_NO, KC_NO, K113, KC_NO, K115, K116, K117, K118 } \ +} + + +#define LAYOUT_tkl_ansi(\ + K000, K010, K001, K011, K002, K012, K003, K013, K004, K014, K015, K006, K016, K007, K017, K008, K018, \ + K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K027, K037, K028, K038, \ + K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056, K057, K048, K058, \ + K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K076, \ + K080, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K086, K088, \ + K100, K110, K101, K113, K105, K115, K106, K116, K117, K108, K118 \ +) { \ + { K000, K001, K002, K003, K004, KC_NO, K006, K007, K008 }, \ + { K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \ + { K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \ + { K030, K031, K032, K033, K034, K035, KC_NO, K037, K038 }, \ + { K040, K041, K042, K043, K044, K045, K046, KC_NO, K048 }, \ + { K050, K051, K052, K053, K054, K055, K056, K057, K058 }, \ + { K060, K061, K062, K063, K064, K065, KC_NO, KC_NO, KC_NO }, \ + { K070, K071, K072, K073, K074, K075, K076, KC_NO, KC_NO }, \ + { K080, K081, K082, K083, K084, K085, K086, KC_NO, K088 }, \ + {KC_NO, K091, K092, K093, K094, K095, KC_NO, KC_NO, KC_NO }, \ + { K100, K101, KC_NO, KC_NO, KC_NO, K105, K106, KC_NO, K108 }, \ + { K110, KC_NO, KC_NO, K113, KC_NO, K115, K116, K117, K118 } \ +} + +#define LAYOUT_tkl_ansi_wkl(\ + K000, K010, K001, K011, K002, K012, K003, K013, K004, K014, K015, K006, K016, K007, K017, K008, K018, \ + K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K027, K037, K028, K038, \ + K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056, K057, K048, K058, \ + K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K076, \ + K080, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K086, K088, \ + K100, K101, K113, K115, K116, K117, K108, K118 \ +) { \ + { K000, K001, K002, K003, K004, KC_NO, K006, K007, K008 }, \ + { K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \ + { K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \ + { K030, K031, K032, K033, K034, K035, KC_NO, K037, K038 }, \ + { K040, K041, K042, K043, K044, K045, K046, KC_NO, K048 }, \ + { K050, K051, K052, K053, K054, K055, K056, K057, K058 }, \ + { K060, K061, K062, K063, K064, K065, KC_NO, KC_NO, KC_NO }, \ + { K070, K071, K072, K073, K074, K075, K076, KC_NO, KC_NO }, \ + { K080, K081, K082, K083, K084, K085, K086, KC_NO, K088 }, \ + {KC_NO, K091, K092, K093, K094, K095, KC_NO, KC_NO, KC_NO }, \ + { K100, K101, KC_NO, KC_NO, KC_NO,KC_NO, KC_NO, KC_NO, K108 }, \ + {KC_NO, KC_NO, KC_NO, K113, KC_NO, K115, K116, K117, K118 } \ +} + diff --git a/keyboards/hineybush/h88/info.json b/keyboards/hineybush/h88/info.json new file mode 100644 index 0000000000..f36ac09f7f --- /dev/null +++ b/keyboards/hineybush/h88/info.json @@ -0,0 +1,20 @@ +{ + "keyboard_name": "h88a", + "url": "", + "maintainer": "hineybush", + "width": 18.25, + "height": 6.25, + "layouts": { + "LAYOUT_all": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"F13", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"x":13, "y":1.25}, {"label":"Bksp", "x":14, "y":1.25}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"x":12.75, "y":3.25}, {"label":"Enter", "x":13.75, "y":3.25, "w":1.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"x":14, "y":4.25}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] + }, + + "LAYOUT_tkl_ansi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"F13", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Bksp", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] + }, + "LAYOUT_tkl_ansi_wkl": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"F13", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Bksp", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25, "w":1.5}, {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] + } + } +} + diff --git a/keyboards/hineybush/h88/keymaps/default/config.h b/keyboards/hineybush/h88/keymaps/default/config.h new file mode 100644 index 0000000000..dbb63d3d54 --- /dev/null +++ b/keyboards/hineybush/h88/keymaps/default/config.h @@ -0,0 +1,21 @@ +/* Copyright 2019 Josh Hinnebusch + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + + +// place overrides here + diff --git a/keyboards/hineybush/h88/keymaps/default/keymap.c b/keyboards/hineybush/h88/keymaps/default/keymap.c new file mode 100644 index 0000000000..17035b4725 --- /dev/null +++ b/keyboards/hineybush/h88/keymaps/default/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2019 Josh Hinnebusch + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_0, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, BL_TOGG, BL_DEC, BL_INC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + + diff --git a/keyboards/hineybush/h88/keymaps/default/readme.md b/keyboards/hineybush/h88/keymaps/default/readme.md new file mode 100644 index 0000000000..455a2e00e8 --- /dev/null +++ b/keyboards/hineybush/h88/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for h88a diff --git a/keyboards/hineybush/h88/keymaps/wkl/config.h b/keyboards/hineybush/h88/keymaps/wkl/config.h new file mode 100644 index 0000000000..dbb63d3d54 --- /dev/null +++ b/keyboards/hineybush/h88/keymaps/wkl/config.h @@ -0,0 +1,21 @@ +/* Copyright 2019 Josh Hinnebusch + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + + +// place overrides here + diff --git a/keyboards/hineybush/h88/keymaps/wkl/keymap.c b/keyboards/hineybush/h88/keymaps/wkl/keymap.c new file mode 100644 index 0000000000..12f225289a --- /dev/null +++ b/keyboards/hineybush/h88/keymaps/wkl/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2019 Josh Hinnebusch + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl_ansi_wkl( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_0, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_tkl_ansi_wkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, BL_TOGG, BL_DEC, BL_INC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), + +}; + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + diff --git a/keyboards/hineybush/h88/keymaps/wkl/readme.md b/keyboards/hineybush/h88/keymaps/wkl/readme.md new file mode 100644 index 0000000000..bc0d78f04e --- /dev/null +++ b/keyboards/hineybush/h88/keymaps/wkl/readme.md @@ -0,0 +1 @@ +# The wkl keymap for h88a diff --git a/keyboards/hineybush/h88/readme.md b/keyboards/hineybush/h88/readme.md new file mode 100644 index 0000000000..d12dbeec3a --- /dev/null +++ b/keyboards/hineybush/h88/readme.md @@ -0,0 +1,40 @@ +h88 +=== + +A QMK-powered replacement PCB for custom TKL keyboards that feature an extra key in the Fn row. This PCB is designed with the TGR Jane V2 CE in mind, however other keyboards with the same layout and a.87 USB positioning may work. + +Keyboard Maintainer: [hineybush](https://github.com/hineybush) +Hardware Supported: h88 ver 1.0 +Hardware Availability: hineybush.com + +Make example for this keyboard (after setting up your build environment): + + make hineybush/h88:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## h88 hardware information + +Controller: Atmega32u4 + + /* Column pin configuration + * col: 0 1 2 3 4 5 6 7 8 + * pin: F0 F1 F4 F5 F6 F7 C7 C6 D2 + */ + + /* Row pin configuration + * row: 0 1 2 3 4 5 6 7 8 9 10 11 + * pin: B0 B1 B2 B3 D0 D1 B5 B6 D7 B4 D6 D4 (Rev 1) + */ + +The H88 PCB utilizes duplex matrix organization. + + Caps Lock LED: D5 + Scroll Lock LED: E6 + Num Lock LED: not supported + Backlight Pin: B7 + RGB Data Pin: D3 + + + +For in-switch indicator LEDs, bridge the center pad of the J1 and J2 3-pad jumpers follwing the small silk screen line. diff --git a/keyboards/hineybush/h88/rules.mk b/keyboards/hineybush/h88/rules.mk new file mode 100644 index 0000000000..62b2d7b8b3 --- /dev/null +++ b/keyboards/hineybush/h88/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +LINK_TIME_OPTIMIZATION_ENABLE = yes diff --git a/keyboards/hineybush/hbcp/config.h b/keyboards/hineybush/hbcp/config.h new file mode 100644 index 0000000000..5bf426df7e --- /dev/null +++ b/keyboards/hineybush/hbcp/config.h @@ -0,0 +1,246 @@ +/* +Copyright 2019 Josh Hinnebusch + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xECE8 +#define DEVICE_VER 0x0001 +#define MANUFACTURER hineybush keyboards +#define PRODUCT hbcp +#define DESCRIPTION compact 1800 layout custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 18 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B1, B6, D0, C7, C6, C5 } +#define MATRIX_COL_PINS { F0, F1, F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, B5, B4, B3, B2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 + +#define RGB_DI_PIN B0 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 27 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ + /*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/hbcp/hbcp.c b/keyboards/hineybush/hbcp/hbcp.c new file mode 100644 index 0000000000..cd5320f6e5 --- /dev/null +++ b/keyboards/hineybush/hbcp/hbcp.c @@ -0,0 +1,110 @@ +/* Copyright 2019 Josh Hinnebusch + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "hbcp.h" + +// Indicator color definitions +#ifndef HSV_CAPS + #define HSV_CAPS 0, 0, 120 // Define caps lock color (H, S, V) +#endif + +#ifndef HSV_NLCK + #define HSV_NLCK 0, 0, 120 // Define num lock color (H, S, V) +#endif + +#ifndef HSV_SCRL + #define HSV_SCRL 0, 0, 120 // Define scroll lock color (H, S, V) +#endif + +#ifndef HSV_BLACK + #define HSV_BLACK 0, 0, 0 // Define 'black' color, more like 'LED off' (H, S, V) +#endif + +// #define HSV_custom_color H, S, V + + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +#ifdef RGBLIGHT_ENABLE + +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + sethsv_raw(HSV_CAPS, (LED_TYPE *)&led[0]); + } else { + sethsv(HSV_BLACK, (LED_TYPE *)&led[0]); + } + if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + sethsv_raw(HSV_NLCK, (LED_TYPE *)&led[1]); + } else { + sethsv(HSV_BLACK, (LED_TYPE *)&led[1]); + } + if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + sethsv_raw(HSV_SCRL, (LED_TYPE *)&led[2]); + } else { + sethsv(HSV_BLACK, (LED_TYPE *)&led[2]); + } + rgblight_set(); +} + +__attribute__ ((weak)) +void keyboard_post_init_user(void) { + rgblight_set_effect_range(3, RGBLED_NUM-3); + led_set_user(_BV(USB_LED_CAPS_LOCK)|_BV(USB_LED_NUM_LOCK)|_BV(USB_LED_SCROLL_LOCK)); + wait_ms(300); + led_set_user(0); +} + +__attribute__ ((weak)) +void hbcp_sethsv_range(uint8_t hue, uint8_t sat, uint8_t val, uint8_t start, uint8_t end) { + LED_TYPE tmp_led; + sethsv_raw(hue, sat, val, &tmp_led); + for (uint8_t i = start; i < end; i++) { + led[i] = tmp_led; + } + rgblight_set(); +} + +#endif diff --git a/keyboards/hineybush/hbcp/hbcp.h b/keyboards/hineybush/hbcp/hbcp.h new file mode 100644 index 0000000000..0bcf7b7304 --- /dev/null +++ b/keyboards/hineybush/hbcp/hbcp.h @@ -0,0 +1,58 @@ +/* Copyright 2019 Josh Hinnebusch + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K013, K114, K115, K116, K117, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, \ + K500, K501, K502, K505, K509, K510, K511, K512, K513, K514, K515, K516, K517 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017}, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117}, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217},\ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317},\ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417},\ + { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, K510, K511, K512, K513, K514, K515, K516, K517 }\ +} + +#define LAYOUT_wkl( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, K114, K115, K116, K117, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, K315, K316, K317, \ + K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, \ + K500, K501, K505, K510, K511, K512, K513, K514, K515, K516, K517 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115, K116, K117 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314, K315, K316, K317 }, \ + { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, KC_NO }, \ + { K500, K501, KC_NO,KC_NO,KC_NO,K505, KC_NO,KC_NO,KC_NO,KC_NO,K510, K511, K512, K513, K514, K515, K516, K517 } \ +} diff --git a/keyboards/hineybush/hbcp/info.json b/keyboards/hineybush/hbcp/info.json new file mode 100644 index 0000000000..8a8fd217f4 --- /dev/null +++ b/keyboards/hineybush/hbcp/info.json @@ -0,0 +1,219 @@ +{ + "keyboard_name": "hbcp", + "url": "", + "maintainer": "hineybush", + "width": 19.5, + "height": 6.25, + "layouts": { + "LAYOUT_all": { + "key_count": 103, + "layout": [ + {"label":"Esc (K000)", "x":0, "y":0}, + {"label":"F1 (K001)", "x":1.25, "y":0}, + {"label":"F2 (K002)", "x":2.25, "y":0}, + {"label":"F3 (K003)", "x":3.25, "y":0}, + {"label":"F4 (K004)", "x":4.25, "y":0}, + {"label":"F5 (K005)", "x":5.5, "y":0}, + {"label":"F6 (K006)", "x":6.5, "y":0}, + {"label":"F7 (K007)", "x":7.5, "y":0}, + {"label":"F8 (K008)", "x":8.5, "y":0}, + {"label":"F9 (K009)", "x":9.75, "y":0}, + {"label":"F10 (K010)", "x":10.75, "y":0}, + {"label":"F11 (K011)", "x":11.75, "y":0}, + {"label":"F12 (K012)", "x":12.75, "y":0}, + {"label":"Delete (K014)", "x":15.5, "y":0}, + {"label":"Insert (K015)", "x":16.5, "y":0}, + {"label":"PgUp (K016)", "x":17.5, "y":0}, + {"label":"PgDn (K017)", "x":18.5, "y":0}, + {"label":"~ (K100)", "x":0, "y":1.25}, + {"label":"! (K101)", "x":1, "y":1.25}, + {"label":"@ (K102)", "x":2, "y":1.25}, + {"label":"# (K103)", "x":3, "y":1.25}, + {"label":"$ (K104)", "x":4, "y":1.25}, + {"label":"% (K105)", "x":5, "y":1.25}, + {"label":"^ (K106)", "x":6, "y":1.25}, + {"label":"& (K107)", "x":7, "y":1.25}, + {"label":"* (K108)", "x":8, "y":1.25}, + {"label":"( (K109)", "x":9, "y":1.25}, + {"label":") (K110)", "x":10, "y":1.25}, + {"label":"_ (K111)", "x":11, "y":1.25}, + {"label":"+ (K112)", "x":12, "y":1.25}, + {"label":"~ (K113)", "x":13, "y":1.25}, + {"label":"Backspace (K013)", "x":14, "y":1.25}, + {"label":"Num Lock (K114)", "x":15.5, "y":1.25}, + {"label":"/ (K115)", "x":16.5, "y":1.25}, + {"label":"* (K116)", "x":17.5, "y":1.25}, + {"label":"Pause (K117)", "x":18.5, "y":1.25}, + {"label":"Tab (K200)", "x":0, "y":2.25, "w":1.5}, + {"label":"Q (K201)", "x":1.5, "y":2.25}, + {"label":"W (K202)", "x":2.5, "y":2.25}, + {"label":"E (K203)", "x":3.5, "y":2.25}, + {"label":"R (K204)", "x":4.5, "y":2.25}, + {"label":"T (K205)", "x":5.5, "y":2.25}, + {"label":"Y (K206)", "x":6.5, "y":2.25}, + {"label":"U (K207)", "x":7.5, "y":2.25}, + {"label":"I (K208)", "x":8.5, "y":2.25}, + {"label":"O (K209)", "x":9.5, "y":2.25}, + {"label":"P (K210)", "x":10.5, "y":2.25}, + {"label":"{ (K211)", "x":11.5, "y":2.25}, + {"label":"} (K212)", "x":12.5, "y":2.25}, + {"label":"| (K213)", "x":13.5, "y":2.25, "w":1.5}, + {"label":"7 (K214)", "x":15.5, "y":2.25}, + {"label":"8 (K215)", "x":16.5, "y":2.25}, + {"label":"9 (K216)", "x":17.5, "y":2.25}, + {"label":"- (K217)", "x":18.5, "y":2.25}, + {"label":"Caps Lock (K300)", "x":0, "y":3.25, "w":1.75}, + {"label":"A (K301)", "x":1.75, "y":3.25}, + {"label":"S (K302)", "x":2.75, "y":3.25}, + {"label":"D (K303)", "x":3.75, "y":3.25}, + {"label":"F (K304)", "x":4.75, "y":3.25}, + {"label":"G (K305)", "x":5.75, "y":3.25}, + {"label":"H (K306)", "x":6.75, "y":3.25}, + {"label":"J (K307)", "x":7.75, "y":3.25}, + {"label":"K (K308)", "x":8.75, "y":3.25}, + {"label":"L (K309)", "x":9.75, "y":3.25}, + {"label":": (K310)", "x":10.75, "y":3.25}, + {"label":"\" (K311)", "x":11.75, "y":3.25}, + {"label":"~ (K312)", "x":12.75, "y":3.25}, + {"label":"Enter (K313)", "x":13.75, "y":3.25, "w":1.25}, + {"label":"4 (K314)", "x":15.5, "y":3.25}, + {"label":"5 (K315)", "x":16.5, "y":3.25}, + {"label":"6 (K316)", "x":17.5, "y":3.25}, + {"label":"+ (K317)", "x":18.5, "y":3.25}, + {"label":"Shift (K400)", "x":0, "y":4.25, "w":1.25}, + {"label":"| (K401)", "x":1.25, "y":4.25}, + {"label":"Z (K402)", "x":2.25, "y":4.25}, + {"label":"X (K403)", "x":3.25, "y":4.25}, + {"label":"C (K404)", "x":4.25, "y":4.25}, + {"label":"V (K405)", "x":5.25, "y":4.25}, + {"label":"B (K406)", "x":6.25, "y":4.25}, + {"label":"N (K407)", "x":7.25, "y":4.25}, + {"label":"M (K408)", "x":8.25, "y":4.25}, + {"label":"< (K409)", "x":9.25, "y":4.25}, + {"label":"> (K410)", "x":10.25, "y":4.25}, + {"label":"? (K411)", "x":11.25, "y":4.25}, + {"label":"Shift (K412)", "x":12.25, "y":4.25, "w":1.75}, + {"label":"Up (K413)", "x":14.25, "y":4.5}, + {"label":"1 (K414)", "x":15.5, "y":4.25}, + {"label":"2 (K415)", "x":16.5, "y":4.25}, + {"label":"3 (K416)", "x":17.5, "y":4.25}, + {"label":"TRNS (K417)", "x":18.5, "y":4.25}, + {"label":"Ctrl (K500)", "x":0, "y":5.25, "w":1.25}, + {"label":"GUI (K501)", "x":1.25, "y":5.25, "w":1.25}, + {"label":"Alt (K502)", "x":2.5, "y":5.25, "w":1.25}, + {"label":"Space (K505)", "x":3.75, "y":5.25, "w":6.25}, + {"label":"Alt (K509)", "x":10, "y":5.25}, + {"label":"MO(1) (K510)", "x":11, "y":5.25}, + {"label":"GUI (K511)", "x":12, "y":5.25}, + {"label":"Left (K512)", "x":13.25, "y":5.5}, + {"label":"Down (K513)", "x":14.25, "y":5.5}, + {"label":"Right (K514)", "x":15.25, "y":5.5}, + {"label":"0 (K515)", "x":16.5, "y":5.25}, + {"label":". (K516)", "x":17.5, "y":5.25}, + {"label":"Enter (K517)", "x":18.5, "y":5.25} + ] + }, + "LAYOUT_wkl": { + "key_count": 97, + "layout": [ + {"label":"Esc (K000)", "x":0, "y":0}, + {"label":"F1 (K001)", "x":1.25, "y":0}, + {"label":"F2 (K002)", "x":2.25, "y":0}, + {"label":"F3 (K003)", "x":3.25, "y":0}, + {"label":"F4 (K004)", "x":4.25, "y":0}, + {"label":"F5 (K005)", "x":5.5, "y":0}, + {"label":"F6 (K006)", "x":6.5, "y":0}, + {"label":"F7 (K007)", "x":7.5, "y":0}, + {"label":"F8 (K008)", "x":8.5, "y":0}, + {"label":"F9 (K009)", "x":9.75, "y":0}, + {"label":"F10 (K010)", "x":10.75, "y":0}, + {"label":"F11 (K011)", "x":11.75, "y":0}, + {"label":"F12 (K012)", "x":12.75, "y":0}, + {"label":"Delete (K014)", "x":15.5, "y":0}, + {"label":"Insert (K015)", "x":16.5, "y":0}, + {"label":"PgUp (K016)", "x":17.5, "y":0}, + {"label":"PgDn (K017)", "x":18.5, "y":0}, + {"label":"~ (K100)", "x":0, "y":1.25}, + {"label":"! (K101)", "x":1, "y":1.25}, + {"label":"@ (K102)", "x":2, "y":1.25}, + {"label":"# (K103)", "x":3, "y":1.25}, + {"label":"$ (K104)", "x":4, "y":1.25}, + {"label":"% (K105)", "x":5, "y":1.25}, + {"label":"^ (K106)", "x":6, "y":1.25}, + {"label":"& (K107)", "x":7, "y":1.25}, + {"label":"* (K108)", "x":8, "y":1.25}, + {"label":"( (K109)", "x":9, "y":1.25}, + {"label":") (K110)", "x":10, "y":1.25}, + {"label":"_ (K111)", "x":11, "y":1.25}, + {"label":"+ (K112)", "x":12, "y":1.25}, + {"label":"Backspace (K013)", "x":13, "y":1.25, "w":2}, + {"label":"Num Lock (K114)", "x":15.5, "y":1.25}, + {"label":"/ (K115)", "x":16.5, "y":1.25}, + {"label":"* (K116)", "x":17.5, "y":1.25}, + {"label":"Pause (K117)", "x":18.5, "y":1.25}, + {"label":"Tab (K200)", "x":0, "y":2.25, "w":1.5}, + {"label":"Q (K201)", "x":1.5, "y":2.25}, + {"label":"W (K202)", "x":2.5, "y":2.25}, + {"label":"E (K203)", "x":3.5, "y":2.25}, + {"label":"R (K204)", "x":4.5, "y":2.25}, + {"label":"T (K205)", "x":5.5, "y":2.25}, + {"label":"Y (K206)", "x":6.5, "y":2.25}, + {"label":"U (K207)", "x":7.5, "y":2.25}, + {"label":"I (K208)", "x":8.5, "y":2.25}, + {"label":"O (K209)", "x":9.5, "y":2.25}, + {"label":"P (K210)", "x":10.5, "y":2.25}, + {"label":"{ (K211)", "x":11.5, "y":2.25}, + {"label":"} (K212)", "x":12.5, "y":2.25}, + {"label":"| (K213)", "x":13.5, "y":2.25, "w":1.5}, + {"label":"7 (K214)", "x":15.5, "y":2.25}, + {"label":"8 (K215)", "x":16.5, "y":2.25}, + {"label":"9 (K216)", "x":17.5, "y":2.25}, + {"label":"- (K217)", "x":18.5, "y":2.25}, + {"label":"Caps Lock (K300)", "x":0, "y":3.25, "w":1.75}, + {"label":"A (K301)", "x":1.75, "y":3.25}, + {"label":"S (K302)", "x":2.75, "y":3.25}, + {"label":"D (K303)", "x":3.75, "y":3.25}, + {"label":"F (K304)", "x":4.75, "y":3.25}, + {"label":"G (K305)", "x":5.75, "y":3.25}, + {"label":"H (K306)", "x":6.75, "y":3.25}, + {"label":"J (K307)", "x":7.75, "y":3.25}, + {"label":"K (K308)", "x":8.75, "y":3.25}, + {"label":"L (K309)", "x":9.75, "y":3.25}, + {"label":": (K310)", "x":10.75, "y":3.25}, + {"label":"\" (K311)", "x":11.75, "y":3.25}, + {"label":"Enter (K313)", "x":12.75, "y":3.25, "w":2.25}, + {"label":"4 (K314)", "x":15.5, "y":3.25}, + {"label":"5 (K315)", "x":16.5, "y":3.25}, + {"label":"6 (K316)", "x":17.5, "y":3.25}, + {"label":"+ (K317)", "x":18.5, "y":3.25}, + {"label":"Shift (K400)", "x":0, "y":4.25, "w":2.25}, + {"label":"Z (K402)", "x":2.25, "y":4.25}, + {"label":"X (K403)", "x":3.25, "y":4.25}, + {"label":"C (K404)", "x":4.25, "y":4.25}, + {"label":"V (K405)", "x":5.25, "y":4.25}, + {"label":"B (K406)", "x":6.25, "y":4.25}, + {"label":"N (K407)", "x":7.25, "y":4.25}, + {"label":"M (K408)", "x":8.25, "y":4.25}, + {"label":"< (K409)", "x":9.25, "y":4.25}, + {"label":"> (K410)", "x":10.25, "y":4.25}, + {"label":"? (K411)", "x":11.25, "y":4.25}, + {"label":"Shift (K412)", "x":12.25, "y":4.25, "w":1.75}, + {"label":"Up (K413)", "x":14.25, "y":4.5}, + {"label":"1 (K414)", "x":15.5, "y":4.25}, + {"label":"2 (K415)", "x":16.5, "y":4.25}, + {"label":"3 (K416)", "x":17.5, "y":4.25}, + {"label":"Ctrl (K500)", "x":0, "y":5.25, "w":1.5}, + {"label":"Alt (K501)", "x":1.5, "y":5.25, "w":1.5}, + {"label":"Space (K505)", "x":3, "y":5.25, "w":7}, + {"label":"MO(1) (K510)", "x":10, "y":5.25, "w":1.5}, + {"label":"GUI (K511)", "x":11.5, "y":5.25, "w":1.5}, + {"label":"Left (K512)", "x":13.25, "y":5.5}, + {"label":"Down (K513)", "x":14.25, "y":5.5}, + {"label":"Right (K514)", "x":15.25, "y":5.5}, + {"label":"0 (K515)", "x":16.5, "y":5.25}, + {"label":". (K516)", "x":17.5, "y":5.25}, + {"label":"Enter (K517)", "x":18.5, "y":4.25, "h":2} + ] + } + } +} diff --git a/keyboards/hineybush/hbcp/keymaps/default/config.h b/keyboards/hineybush/hbcp/keymaps/default/config.h new file mode 100644 index 0000000000..89865cef35 --- /dev/null +++ b/keyboards/hineybush/hbcp/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/hineybush/hbcp/keymaps/default/keymap.c b/keyboards/hineybush/hbcp/keymaps/default/keymap.c new file mode 100644 index 0000000000..b8ab480ba3 --- /dev/null +++ b/keyboards/hineybush/hbcp/keymaps/default/keymap.c @@ -0,0 +1,84 @@ +/* Copyright 2019 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( /* Base */ + + /*#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K013, K114, K115, K116, K117, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, \ + K500, K501, K502, K505, K509, K510, K511, K512, K513, K514, K515, K516, K517 \ +)*/ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGUP, KC_PGDN, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_TRNS, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK,KC_HOME, KC_END, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_HUI,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RESET ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAD, RGB_SAI,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, RGB_TOG, RGB_MOD,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT, KC_TRNS,KC_TRNS, KC_TRNS + + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} diff --git a/keyboards/hineybush/hbcp/keymaps/default/readme.md b/keyboards/hineybush/hbcp/keymaps/default/readme.md new file mode 100644 index 0000000000..8cbd45cd09 --- /dev/null +++ b/keyboards/hineybush/hbcp/keymaps/default/readme.md @@ -0,0 +1,2 @@ +# The default "all key" keymap for hbcp +# Somewhat dirty with ISO and split backspace, but has all keys diff --git a/keyboards/hineybush/hbcp/keymaps/hiney/config.h b/keyboards/hineybush/hbcp/keymaps/hiney/config.h new file mode 100644 index 0000000000..b864d6a635 --- /dev/null +++ b/keyboards/hineybush/hbcp/keymaps/hiney/config.h @@ -0,0 +1,44 @@ +/* Copyright 2019 Josh Hinnebusch + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here + +#ifndef HSV_SOFT_PINK + #define HSV_SOFT_PINK 255, 110, 100 // Define custom "soft pink" color +#endif + +#ifndef HSV_SOFT_WHITE + #define HSV_SOFT_WHITE 0, 0, 90 // Define custom "soft white" color +#endif + +#ifndef HSV_WARM_WHITE + #define HSV_WARM_WHITE 41, 105, 90 // Define custom "warm white" color +#endif + +#ifndef HSV_SOFT_RED + #define HSV_SOFT_RED 0, 240, 160 // Define custom "soft red" color +#endif + +#ifndef HSV_SOFT_BLUE + #define HSV_SOFT_BLUE 159, 180, 160 // Define custom "soft blue" color +#endif + +#ifndef HSV_BLACK + #define HSV_BLACK 0, 0, 0 // Define 'black' color, more like 'LED off' (H, S, V) +#endif +// not sure why i need to also define this here, as it is already in hbcp.h diff --git a/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c b/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c new file mode 100644 index 0000000000..bcfb9ed5bc --- /dev/null +++ b/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c @@ -0,0 +1,106 @@ +/* Copyright 2019 Josh Hinnebusch + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + ALTCUT, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_wkl( /* Base */ + + /*K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, K114, K115, K116, K117, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, K315, K316, K317, \ + K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, \ + K500, K501, K505, K510, K511, K512, K513, K514, K515, K516, K517 \*/ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGUP, KC_PGDN, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_LNUM, KC_PSLS, KC_PAST, KC_PAUS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + + ), + + [1] = LAYOUT_wkl( + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK,KC_HOME, KC_END, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_HUI,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RESET ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAD, RGB_SAI,KC_TRNS, KC_TRNS, + KC_CAPS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, RGB_TOG, RGB_MOD,KC_TRNS, + KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT, KC_TRNS,KC_TRNS, KC_TRNS + + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case ALTCUT: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + send_string_with_delay_P(PSTR(SS_TAP(X_TAB)SS_TAP(X_T)SS_TAP(X_V)SS_TAP(X_B)), 20); // altium macro + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +#ifdef RGBLIGHT_ENABLE +// The first three LEDs are used as indicators for CAPS_LOCK, NUM_LOCK and SCROLL_LOCK. +void led_set_user(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + sethsv_raw(HSV_SOFT_RED, (LED_TYPE *)&led[0]); + } else { + sethsv(HSV_BLACK, (LED_TYPE *)&led[0]); + } + if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + sethsv_raw(HSV_WARM_WHITE, (LED_TYPE *)&led[1]); + } else { + sethsv(HSV_BLACK, (LED_TYPE *)&led[1]); + } + if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + sethsv_raw(HSV_SOFT_BLUE, (LED_TYPE *)&led[2]); + } else { + sethsv(HSV_BLACK, (LED_TYPE *)&led[2]); + } + rgblight_set(); +} + +#endif diff --git a/keyboards/hineybush/hbcp/keymaps/hiney/readme.md b/keyboards/hineybush/hbcp/keymaps/hiney/readme.md new file mode 100644 index 0000000000..2829d4b5ba --- /dev/null +++ b/keyboards/hineybush/hbcp/keymaps/hiney/readme.md @@ -0,0 +1 @@ +# hineybush's keymap for hbcp diff --git a/keyboards/hineybush/hbcp/keymaps/wkl/config.h b/keyboards/hineybush/hbcp/keymaps/wkl/config.h new file mode 100644 index 0000000000..89865cef35 --- /dev/null +++ b/keyboards/hineybush/hbcp/keymaps/wkl/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/hineybush/hbcp/keymaps/wkl/keymap.c b/keyboards/hineybush/hbcp/keymaps/wkl/keymap.c new file mode 100644 index 0000000000..09d5b6b33c --- /dev/null +++ b/keyboards/hineybush/hbcp/keymaps/wkl/keymap.c @@ -0,0 +1,82 @@ +/* Copyright 2019 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_wkl( /* Base */ + + /*K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, K114, K115, K116, K117, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, K315, K316, K317, \ + K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, \ + K500, K501, K505, K510, K511, K512, K513, K514, K515, K516, K517 \*/ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGUP, KC_PGDN, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + + ), + + [1] = LAYOUT_wkl( + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK,KC_HOME, KC_END, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_HUI,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RESET ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAD, RGB_SAI,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, RGB_TOG, RGB_MOD,KC_TRNS, + KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT, KC_TRNS,KC_TRNS, KC_TRNS + + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} diff --git a/keyboards/hineybush/hbcp/keymaps/wkl/readme.md b/keyboards/hineybush/hbcp/keymaps/wkl/readme.md new file mode 100644 index 0000000000..70f5936370 --- /dev/null +++ b/keyboards/hineybush/hbcp/keymaps/wkl/readme.md @@ -0,0 +1 @@ +# The default WKL keymap for hbcp diff --git a/keyboards/hineybush/hbcp/readme.md b/keyboards/hineybush/hbcp/readme.md new file mode 100644 index 0000000000..712339413c --- /dev/null +++ b/keyboards/hineybush/hbcp/readme.md @@ -0,0 +1,15 @@ +# hbcp + + + +A custom compact-1800 layout keyboard. + +Keyboard Maintainer: [hineybush](https://github.com/hineybush) +Hardware Supported: HBCP PCB featuring an AT90USB1286 +Hardware Availability: Group buy only + +Make example for this keyboard (after setting up your build environment): + + make hineybush/hbcp:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/hineybush/hbcp/rules.mk b/keyboards/hineybush/hbcp/rules.mk new file mode 100644 index 0000000000..fa31c9e001 --- /dev/null +++ b/keyboards/hineybush/hbcp/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = at90usb1286 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/hineybush/hineyg80/rules.mk b/keyboards/hineybush/hineyg80/rules.mk index 383a3594b4..7218e1e1bf 100644 --- a/keyboards/hineybush/hineyg80/rules.mk +++ b/keyboards/hineybush/hineyg80/rules.mk @@ -1,64 +1,16 @@ # MCU name -#MCU = at90usb1286 MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/hineybush/sm68/config.h b/keyboards/hineybush/sm68/config.h new file mode 100644 index 0000000000..f41f5bc2d5 --- /dev/null +++ b/keyboards/hineybush/sm68/config.h @@ -0,0 +1,241 @@ +/* +Copyright 2019 hineybush + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xEC9F +#define DEVICE_VER 0x0001 +#define MANUFACTURER hineybush keyboards +#define PRODUCT sm68 +#define DESCRIPTION PCB for switchmod keyboards projects + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B2, B1, B0, D4, D1 } +#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D3, D2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + + +#define RGB_DI_PIN D0 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 16 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ + /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS + /*== or choose animations ==*/ + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST + #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/sm68/info.json b/keyboards/hineybush/sm68/info.json new file mode 100644 index 0000000000..1db400d663 --- /dev/null +++ b/keyboards/hineybush/sm68/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "sm68", + "url": "", + "maintainer": "hineybush", + "width": 17.5, + "height": 5, + "layouts": { + "LAYOUT_68_ansi_split_bs_rshift": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Insert", "x":15.5, "y":0}, {"x":16.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.5, "y":1}, {"x":16.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"\u2191", "x":15.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"\u2190", "x":14.5, "y":4}, {"label":"\u2193", "x":15.5, "y":4}, {"label":"\u2192", "x":16.5, "y":4}] + }, + "LAYOUT_68_ansi_split_rshift": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.5, "y":0}, {"x":16.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"x":16.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"\u2191", "x":15.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"\u2190", "x":14.5, "y":4}, {"label":"\u2193", "x":15.5, "y":4}, {"label":"\u2192", "x":16.5, "y":4}] + } + } +} diff --git a/keyboards/hineybush/sm68/keymaps/default/config.h b/keyboards/hineybush/sm68/keymaps/default/config.h new file mode 100644 index 0000000000..89865cef35 --- /dev/null +++ b/keyboards/hineybush/sm68/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/hineybush/sm68/keymaps/default/keymap.c b/keyboards/hineybush/sm68/keymaps/default/keymap.c new file mode 100644 index 0000000000..3d0a1a4e97 --- /dev/null +++ b/keyboards/hineybush/sm68/keymaps/default/keymap.c @@ -0,0 +1,45 @@ +/* Copyright 2019 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_68_ansi_split_rshift( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT_68_ansi_split_rshift( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + + diff --git a/keyboards/hineybush/sm68/keymaps/default/readme.md b/keyboards/hineybush/sm68/keymaps/default/readme.md new file mode 100644 index 0000000000..90031c3b02 --- /dev/null +++ b/keyboards/hineybush/sm68/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for sm68 diff --git a/keyboards/hineybush/sm68/readme.md b/keyboards/hineybush/sm68/readme.md new file mode 100644 index 0000000000..6c38158bc7 --- /dev/null +++ b/keyboards/hineybush/sm68/readme.md @@ -0,0 +1,15 @@ +# sm68 + +Image TBA + +Exact keyboard support TBA by switchmod keyboards + +* Keyboard Maintainer: [hineybush](https://github.com/hineybush) +* Hardware Supported: SM68 PCB +* Hardware Availability: TBA + +Make example for this keyboard (after setting up your build environment): + + make hineybush/sm68:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/hineybush/sm68/rules.mk b/keyboards/hineybush/sm68/rules.mk new file mode 100644 index 0000000000..49f5ca7fdc --- /dev/null +++ b/keyboards/hineybush/sm68/rules.mk @@ -0,0 +1,32 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/hineybush/sm68/sm68.c b/keyboards/hineybush/sm68/sm68.c new file mode 100644 index 0000000000..5aa3c85bbc --- /dev/null +++ b/keyboards/hineybush/sm68/sm68.c @@ -0,0 +1,50 @@ +/* Copyright 2019 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "sm68.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +/* +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} +*/ diff --git a/keyboards/hineybush/sm68/sm68.h b/keyboards/hineybush/sm68/sm68.h new file mode 100644 index 0000000000..81d25c12fa --- /dev/null +++ b/keyboards/hineybush/sm68/sm68.h @@ -0,0 +1,59 @@ +/* Copyright 2019 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +// split backspace +#define LAYOUT_68_ansi_split_bs_rshift( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k113, k014, k015, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k213, k114, k115, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, \ + k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k314, \ + k400, k401, k402, k404, k408, k409, k410, k413, k414, k415 \ +) \ +{ \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, KC_NO, KC_NO}, \ + { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, KC_NO, k314, KC_NO}, \ + { k400, k401, k402, KC_NO,k404,KC_NO, KC_NO,k408, k409, k410, KC_NO, KC_NO, KC_NO,k413, k414, k415} \ +} + +// full backspace +#define LAYOUT_68_ansi_split_rshift( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k113, k014, k015, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k213, k114, k115, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, \ + k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k314, \ + k400, k401, k402, k404, k408, k409, k410, k413, k414, k415 \ +) \ +{ \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012,KC_NO, k014, k015 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, KC_NO, KC_NO}, \ + { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, KC_NO, k314, KC_NO}, \ + { k400, k401, k402, KC_NO,k404,KC_NO, KC_NO,k408, k409, k410, KC_NO, KC_NO, KC_NO,k413, k414, k415} \ +} |