diff options
Diffstat (limited to 'keyboards/hs60/config.h')
| -rw-r--r-- | keyboards/hs60/config.h | 146 |
1 files changed, 0 insertions, 146 deletions
diff --git a/keyboards/hs60/config.h b/keyboards/hs60/config.h deleted file mode 100644 index 31f7c07901..0000000000 --- a/keyboards/hs60/config.h +++ /dev/null @@ -1,146 +0,0 @@ -/* -Copyright 2018 Yiancar - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0257 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Yiancar-Designs -#define PRODUCT HS60 -#define DESCRIPTION GH60 compatible, tool free RGB keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B0, B1, B2, B3, F7 } -#define MATRIX_COL_PINS { F1, F4, F5, E6, F0, B7, D2, D3, D5, D4, D6, D7, B4, B5 } -#define UNUSED_PINS { B6, C6, C7, F6 } - -/* bootloader configuration */ - -#define QMK_ESC_OUTPUT B5 // usually COL -#define QMK_ESC_INPUT B2 // usually ROW - -/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* Backlight options */ - -//This is experimental do not enable yet -//#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) - -#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended -#define RGB_MATRIX_SKIP_FRAMES 0 -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 215 - -#define DRIVER_ADDR_1 0b1110100 -#define DRIVER_ADDR_2 0b1110101 - -#define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 30 - -#ifdef HS60_ANSI -#define DRIVER_2_LED_TOTAL 31 -#else -#define DRIVER_2_LED_TOTAL 32 -#endif - -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL - -#endif |