diff options
Diffstat (limited to 'keyboards/jj40/README.md')
| -rw-r--r-- | keyboards/jj40/README.md | 15 |
1 files changed, 13 insertions, 2 deletions
diff --git a/keyboards/jj40/README.md b/keyboards/jj40/README.md index 563f5788e3..1b47ab8162 100644 --- a/keyboards/jj40/README.md +++ b/keyboards/jj40/README.md @@ -18,13 +18,24 @@ Note that this is a complete replacement for the firmware, so you won't be using Bootmapper Client to change any keyboard settings, since not all the USB report options are supported. -In addition you may need the AVR toolchain and `bootloadHID` for flashing: +In addition you may need the AVR toolchain and `bootloadHID` ([GitHub repo](https://github.com/whiteneon/bootloadHID)) for flashing: +For macOS: ``` $ brew cask install crosspack-avr $ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb ``` +For Linux: +``` +$ sudo apt install libusb-dev +$ wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz +$ tar -xzf bootloadHID.2012-12-08.tar.gz +$ cd bootloadHID.2012-12-08/commandline +$ make +$ sudo cp bootloadHID /usr/bin +``` + In order to use the `./program` script, which can reboot the board into the bootloader, you'll need Python 2 with PyUSB installed: @@ -32,7 +43,7 @@ the bootloader, you'll need Python 2 with PyUSB installed: $ pip install pyusb ``` -If you prefer, you can just build it and flash the firmware directly with +If you prefer (or are having issues with a `program` flash), you can just build it (`make jj40:<keymap-name>` and flash the firmware (`.hex` file) directly with `bootloadHID` if you boot the board while holding down `Backspace` (`Top Right Key`) to keep it in the bootloader: |