diff options
Diffstat (limited to 'keyboards/kc60se/readme.md')
| -rw-r--r-- | keyboards/kc60se/readme.md | 60 |
1 files changed, 53 insertions, 7 deletions
diff --git a/keyboards/kc60se/readme.md b/keyboards/kc60se/readme.md index d6edbdb351..55583d81db 100644 --- a/keyboards/kc60se/readme.md +++ b/keyboards/kc60se/readme.md @@ -1,15 +1,61 @@ # kc60se - +* Keyboard Maintainer: [Blake C. Lewis](https://github.com/BlakeCLewis), [MechMerlin](https://www.github.com/mechmerlin) +* Hardware Supported: KC60SE +* Hardware Availability: PCB is no longer available -A short description of the keyboard/project +## Description: + * 60% keyboard PCB; + * supports ANSI, ISO, and HHKB layouts. -Keyboard Maintainer: [Blake C. Lewis](https://github.com/BlakeCLewis), [MechMerlin](https://www.github.com/mechmerlin) -Hardware Supported: KC60 SE -Hardware Availability: [Aliexpress](https://www.aliexpress.com/store/product/Free-shipping-GH60-PCB-KC60-SE-Fully-Programmable-For-DIY-Mechanical-Keyboard-Poker-Faceu-HHKB-Support/429151_32799437588.html?spm=2114.12010608.0.0.2995e5c0hNRgMH) -Make example for this keyboard (after setting up your build environment): +### Enter the Bootloader + * As delivered, BOOTMAGIC_ENABLE = yes: + * unplug keyboard; + * while holding down 'Space' 'B', plug in USB cable and continue to hold for 8 seconds; + * 'lsusb' should report 'Atmel Corp. atmega32u4 DFU bootloader' instead of 'feed 6060'; + * in bootloader LEDs are off & keyboard does not work. + * New firmware, BOOTMAGIC_ENABLE = lite: + * holding down esc while pluging in usb. + * Hardware way: + * momentary jump pads 5 & 6 to enter bootloader; +### Compile the default keymap: make kc60se:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +### NKRO + * N or 6 Key Rollover NKRO/6KRO + * navigating bios of computer may require 6KRO + * default keymap has fn(T) mapped to toggle NKRO/6KRO + * test: press 8 keys at same time, if 6, then 6KRO, if 8, then NKRO + +### DIP switches enable/disable GUI keys, the second keys from the ends on the bottom row: + * K41/K4C are WIN/GUI and will disrupt games; + * Add keycodes GUI_ON and GUI_OFF to your function layer to switch on/off GUI keys. It is eaier than flipping the dip switches; + + ``` + dip keys + #1 #2 K41 K4C + 1 1 1 1 both keys enabled + 1 0 0 1 + 0 1 1 0 + 0 0 0 0 both keys disabled + ``` +### ISP header next to the ATmega32U4: + * if you can't get into bootloader, while keyboard is on, momentary jump pad 5 to pad 6 + + ``` + 2 4 6 + : : : + 1 3 5 + ``` + ``` + 1 - B3 MISO, column 13, square pad + 2 - VCC + 3 - B1 SCLK, column 7 + 4 - B2 MOSI, caplock led + 5 - Reset | momentary jump 5 and 6 + 6 - Ground | to enter Bootloader + ``` |