diff options
Diffstat (limited to 'keyboards/lily58')
36 files changed, 1972 insertions, 215 deletions
diff --git a/keyboards/lily58/config.h b/keyboards/lily58/config.h index db4844c910..b88ec06bf4 100644 --- a/keyboards/lily58/config.h +++ b/keyboards/lily58/config.h @@ -18,4 +18,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "serial_config.h"
\ No newline at end of file +#include "config_common.h" +#include <serial_config.h> + +#define USE_I2C +#define USE_SERIAL + +#ifdef USE_Link_Time_Optimization + // LTO has issues with macros (action_get_macro) and "functions" (fn_actions), + // so just disable them + #define NO_ACTION_MACRO + #define NO_ACTION_FUNCTION + + #define DISABLE_LEADER +#endif // USE_Link_Time_Optimization
\ No newline at end of file diff --git a/keyboards/lily58/i2c.c b/keyboards/lily58/i2c.c index 084c890c40..4bee5c6398 100644..100755 --- a/keyboards/lily58/i2c.c +++ b/keyboards/lily58/i2c.c @@ -34,7 +34,7 @@ void i2c_delay(void) { // _delay_us(100); } -// Setup twi to run at 100kHz +// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) void i2c_master_init(void) { // no prescaler TWSR = 0; diff --git a/keyboards/lily58/i2c.h b/keyboards/lily58/i2c.h index c15b6bc506..710662c7ab 100644..100755 --- a/keyboards/lily58/i2c.h +++ b/keyboards/lily58/i2c.h @@ -1,5 +1,4 @@ -#ifndef I2C_H -#define I2C_H +#pragma once #include <stdint.h> @@ -15,7 +14,7 @@ #define SLAVE_BUFFER_SIZE 0x10 -// i2c SCL clock frequency +// i2c SCL clock frequency 400kHz #define SCL_CLOCK 400000L extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; @@ -45,5 +44,3 @@ extern unsigned char i2c_readNak(void); extern unsigned char i2c_read(unsigned char ack); #define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/lily58/keymaps/default/config.h b/keyboards/lily58/keymaps/default/config.h index fd09785593..58bbdc5e9d 100644 --- a/keyboards/lily58/keymaps/default/config.h +++ b/keyboards/lily58/keymaps/default/config.h @@ -17,12 +17,10 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#pragma once -/* Use I2C or Serial, not both */ +#pragma once -#define USE_SERIAL -// #define USE_I2C +//#define USE_MATRIX_I2C /* Select hand configuration */ @@ -30,6 +28,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define MASTER_RIGHT // #define EE_HANDS +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + // Underglow /* #undef RGBLED_NUM diff --git a/keyboards/lily58/keymaps/default/keymap.c b/keyboards/lily58/keymaps/default/keymap.c index 8d77058129..5ff5dc3182 100644 --- a/keyboards/lily58/keymaps/default/keymap.c +++ b/keyboards/lily58/keymaps/default/keymap.c @@ -1,7 +1,23 @@ #include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + + extern keymap_config_t keymap_config; +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + #define _QWERTY 0 #define _LOWER 1 #define _RAISE 2 @@ -88,9 +104,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------| |------+------+------+------+------+------| * | | | | | | | | | | | | | | * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | | | | | | |-------. ,-------| | | | | | | + * | | | | | | |-------. ,-------| | |RGB ON| HUE+ | SAT+ | VAL+ | * |------+------+------+------+------+------| | | |------+------+------+------+------+------| - * | | | | | | |-------| |-------| | | | | | | + * | | | | | | |-------| |-------| | | MODE | HUE- | SAT- | VAL- | * `-----------------------------------------/ / \ \-----------------------------------------' * | LAlt | LGUI |LOWER | /Space / \Enter \ |RAISE |BackSP| RGUI | * | | | |/ / \ \ | | | | @@ -99,17 +115,92 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT( \ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD,\ _______, _______, _______, _______, _______, _______, _______, _______ \ ) }; +int RGB_current_mode; + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +// const char *read_mode_icon(bool swap); +// const char *read_host_led_state(void); +// void set_timelog(void); +// const char *read_timelog(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); + //matrix_write_ln(matrix, read_host_led_state()); + //matrix_write_ln(matrix, read_timelog()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + // set_timelog(); + } + switch (keycode) { case QWERTY: - if (record->event.pressed) { + if (record->event.pressed) { set_single_persistent_default_layer(_QWERTY); } return false; @@ -117,31 +208,31 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case LOWER: if (record->event.pressed) { layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); } else { layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); } return false; break; case RAISE: if (record->event.pressed) { layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); } else { layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); } return false; break; case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; } return true; }
\ No newline at end of file diff --git a/keyboards/lily58/keymaps/default/rules.mk b/keyboards/lily58/keymaps/default/rules.mk index 3d2d3c9e0f..922fac6b69 100644 --- a/keyboards/lily58/keymaps/default/rules.mk +++ b/keyboards/lily58/keymaps/default/rules.mk @@ -1,21 +1,30 @@ - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # - -RGBLIGHT_ENABLE = no - BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -ONEHAND_ENABLE = no # Enable one-hand typing +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
\ No newline at end of file +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/lily58/keymaps/yuchi/config.h b/keyboards/lily58/keymaps/yuchi/config.h index fd09785593..58bbdc5e9d 100644 --- a/keyboards/lily58/keymaps/yuchi/config.h +++ b/keyboards/lily58/keymaps/yuchi/config.h @@ -17,12 +17,10 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#pragma once -/* Use I2C or Serial, not both */ +#pragma once -#define USE_SERIAL -// #define USE_I2C +//#define USE_MATRIX_I2C /* Select hand configuration */ @@ -30,6 +28,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define MASTER_RIGHT // #define EE_HANDS +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + // Underglow /* #undef RGBLED_NUM diff --git a/keyboards/lily58/keymaps/yuchi/keymap.c b/keyboards/lily58/keymaps/yuchi/keymap.c index d708dbec76..13b6cb1687 100644 --- a/keyboards/lily58/keymaps/yuchi/keymap.c +++ b/keyboards/lily58/keymaps/yuchi/keymap.c @@ -1,7 +1,23 @@ #include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + + extern keymap_config_t keymap_config; +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + #define _QWERTY 0 #define _LOWER 1 #define _RAISE 2 @@ -89,28 +105,103 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------| |------+------+------+------+------+------| * | | | | | | | | | | | | | | * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | | | | | | |-------. ,-------| | | | | | | + * | | | | | | |-------. ,-------| | |RGB ON| HUE+ | SAT+ | VAL+ | * |------+------+------+------+------+------| | | |------+------+------+------+------+------| - * | | | | | | |-------| |-------| | | | | | | + * | | | | | | |-------| |-------| | | MODE | HUE- | SAT- | VAL- | * `-----------------------------------------/ / \ \-----------------------------------------' * |LOWER | LGUI | Alt | /Space / \Enter \ |BackSP| RGUI |RAISE | * | | | |/ / \ \ | | | | - * `-------------------''-------' '------''--------------------' + * `----------------------------' '------''--------------------' */ [_ADJUST] = LAYOUT( \ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD,\ _______, _______, _______, _______, _______, _______, _______, _______ \ ) }; +int RGB_current_mode; + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +// const char *read_mode_icon(bool swap); +// const char *read_host_led_state(void); +// void set_timelog(void); +// const char *read_timelog(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); + //matrix_write_ln(matrix, read_host_led_state()); + //matrix_write_ln(matrix, read_timelog()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + // set_timelog(); + } + switch (keycode) { case QWERTY: - if (record->event.pressed) { + if (record->event.pressed) { set_single_persistent_default_layer(_QWERTY); } return false; @@ -118,31 +209,31 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case LOWER: if (record->event.pressed) { layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); } else { layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); } return false; break; case RAISE: if (record->event.pressed) { layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); } else { layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); } return false; break; case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; } return true; }
\ No newline at end of file diff --git a/keyboards/lily58/keymaps/yuchi/rules.mk b/keyboards/lily58/keymaps/yuchi/rules.mk index 73777a1b78..922fac6b69 100644 --- a/keyboards/lily58/keymaps/yuchi/rules.mk +++ b/keyboards/lily58/keymaps/yuchi/rules.mk @@ -1,22 +1,30 @@ - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # - -OLED_ENABLE = no -RGBLIGHT_ENABLE = no - BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -ONEHAND_ENABLE = no # Enable one-hand typing +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
\ No newline at end of file +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/lily58/lib/glcdfont.c b/keyboards/lily58/lib/glcdfont.c new file mode 100644 index 0000000000..c691ea9d0b --- /dev/null +++ b/keyboards/lily58/lib/glcdfont.c @@ -0,0 +1,243 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/pgmspace.h> +#elif defined(ESP8266) + #include <pgmspace.h> +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font +const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x80, 0xE0, 0x70, 0x18, + 0x0C, 0x18, 0x30, 0xE0, 0x80, 0x00, + 0x00, 0x10, 0xF8, 0x90, 0x10, 0x30, + 0x78, 0x30, 0x10, 0xB8, 0xFC, 0x38, + 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xF8, 0xFC, 0xF8, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, + 0x9C, 0x1C, 0x00, 0x00, 0x00, 0x00, + 0xF8, 0xFC, 0xF8, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x1C, 0xFC, 0xF8, + 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0xE0, 0xF8, 0x7C, 0x1C, + 0x00, 0x00, 0x00, 0xF0, 0xFC, 0xFC, + 0xFC, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, + 0x1C, 0x1C, 0x1C, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xC0, 0xF0, 0xF8, + 0x38, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, + 0x1C, 0x3C, 0xF8, 0xF0, 0xE0, 0x00, + 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, + 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, + 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, + 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, + 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, + 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, + 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, + 0xBC, 0xE0, 0x81, 0x81, 0x81, 0x83, + 0x83, 0x82, 0x87, 0x0C, 0x18, 0x30, + 0x60, 0xC0, 0x00, 0x00, 0x1F, 0xFE, + 0x90, 0xB9, 0xFF, 0xBB, 0x91, 0x98, + 0x3C, 0x18, 0x11, 0x13, 0x3F, 0x11, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFF, 0xFF, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, + 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, + 0x0F, 0x7F, 0xF8, 0xE0, 0x80, 0xF0, + 0xFC, 0x3F, 0x0F, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x3F, 0x3F, 0x3F, + 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x3C, + 0x78, 0xF8, 0xF0, 0xE0, 0x80, 0x00, + 0x00, 0x00, 0x00, 0xC3, 0xE7, 0xFF, + 0x7E, 0x3C, 0x38, 0x78, 0x78, 0x70, + 0x70, 0xF8, 0xFF, 0xDF, 0x87, 0x00, + 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, + 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, + 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, + 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, + 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, + 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, + 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x18, 0x3C, 0x24, 0x66, 0x63, 0x41, + 0xC1, 0x81, 0x80, 0x80, 0x80, 0x80, + 0x80, 0x80, 0x81, 0xC1, 0x41, 0x62, + 0x38, 0x6C, 0x4C, 0xC6, 0x81, 0x81, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x81, + 0xC1, 0x43, 0x62, 0x36, 0x1C, 0x18, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFF, 0xFF, 0xFF, 0xC0, 0xC0, + 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, + 0xC0, 0x80, 0x00, 0x00, 0x00, 0x7F, + 0xFF, 0x7F, 0x00, 0x00, 0x00, 0x00, + 0x7F, 0xFF, 0xFF, 0xC0, 0x80, 0x00, + 0x00, 0x00, 0xE0, 0xE0, 0xC0, 0xC0, + 0xC0, 0xE0, 0xF9, 0x7F, 0x1F, 0x07, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x70, 0xF0, 0xE0, + 0xE0, 0xC0, 0xC0, 0xC0, 0xC0, 0xE0, + 0xF0, 0xF8, 0x7F, 0x3F, 0x0F, 0x00, + 0x00, 0x00, 0x0F, 0x3F, 0x7F, 0xF9, + 0xE0, 0xE0, 0xC0, 0xC0, 0xC0, 0xC0, + 0xC0, 0xE0, 0xF9, 0x7F, 0x3F, 0x1F, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; +#endif // FONT5X7_H diff --git a/keyboards/lily58/lib/host_led_state_reader.c b/keyboards/lily58/lib/host_led_state_reader.c new file mode 100644 index 0000000000..0e22173b1d --- /dev/null +++ b/keyboards/lily58/lib/host_led_state_reader.c @@ -0,0 +1,15 @@ +#include <stdio.h> +#include "lily58.h" + +char host_led_state_str[24]; + +const char *read_host_led_state(void) +{ + uint8_t leds = host_keyboard_leds(); + snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s", + (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ", + (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ", + (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "); + + return host_led_state_str; +} diff --git a/keyboards/lily58/lib/keylogger.c b/keyboards/lily58/lib/keylogger.c new file mode 100644 index 0000000000..a1bd476d20 --- /dev/null +++ b/keyboards/lily58/lib/keylogger.c @@ -0,0 +1,45 @@ +#include <stdio.h> +#include "lily58.h" + +char keylog_str[24] = {}; +char keylogs_str[21] = {}; +int keylogs_str_idx = 0; + +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ', + ' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '}; + +void set_keylog(uint16_t keycode, keyrecord_t *record) { + char name = ' '; + if (keycode < 60) { + name = code_to_name[keycode]; + } + + // update keylog + snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", + record->event.key.row, record->event.key.col, + keycode, name); + + // update keylogs + if (keylogs_str_idx == sizeof(keylogs_str) - 1) { + keylogs_str_idx = 0; + for (int i = 0; i < sizeof(keylogs_str) - 1; i++) { + keylogs_str[i] = ' '; + } + } + + keylogs_str[keylogs_str_idx] = name; + keylogs_str_idx++; +} + +const char *read_keylog(void) { + return keylog_str; +} + +const char *read_keylogs(void) { + return keylogs_str; +} diff --git a/keyboards/lily58/lib/layer_state_reader.c b/keyboards/lily58/lib/layer_state_reader.c new file mode 100644 index 0000000000..58f406bbc9 --- /dev/null +++ b/keyboards/lily58/lib/layer_state_reader.c @@ -0,0 +1,35 @@ + +#include QMK_KEYBOARD_H +#include <stdio.h> +#include "lily58.h" + +#define L_BASE 0 +#define L_LOWER 2 +#define L_RAISE 4 +#define L_ADJUST 65536 +#define L_ADJUST_TRI 65542 + +char layer_state_str[24]; + +const char *read_layer_state(void) { + switch (layer_state) + { + case L_BASE: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default"); + break; + case L_RAISE: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise"); + break; + case L_LOWER: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower"); + break; + case L_ADJUST: + case L_ADJUST_TRI: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust"); + break; + default: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state); + } + + return layer_state_str; +} diff --git a/keyboards/lily58/lib/logo_reader.c b/keyboards/lily58/lib/logo_reader.c new file mode 100644 index 0000000000..9f8adb8466 --- /dev/null +++ b/keyboards/lily58/lib/logo_reader.c @@ -0,0 +1,11 @@ +#include "lily58.h" + +const char *read_logo(void) { + static char logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, + 0}; + + return logo; +} diff --git a/keyboards/lily58/lib/mode_icon_reader.c b/keyboards/lily58/lib/mode_icon_reader.c new file mode 100644 index 0000000000..2bce4a71b0 --- /dev/null +++ b/keyboards/lily58/lib/mode_icon_reader.c @@ -0,0 +1,15 @@ +#include <stdio.h> +#include "lily58.h" + +char mode_icon[24]; + +const char *read_mode_icon(bool swap) { + static char logo[][2][3] = {{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}}; + if (swap == false) { + snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[0][0], logo[0][1]); + } else { + snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[1][0], logo[1][1]); + } + + return mode_icon; +} diff --git a/keyboards/lily58/lib/rgb_state_reader.c b/keyboards/lily58/lib/rgb_state_reader.c new file mode 100644 index 0000000000..e0efe2e528 --- /dev/null +++ b/keyboards/lily58/lib/rgb_state_reader.c @@ -0,0 +1,15 @@ +#ifdef RGBLIGHT_ENABLE + +#include QMK_KEYBOARD_H +#include <stdio.h> + +extern rgblight_config_t rgblight_config; +char rbf_info_str[24]; +const char *read_rgb_info(void) { + + snprintf(rbf_info_str, sizeof(rbf_info_str), "%s %2d h%3d s%3d v%3d", + rgblight_config.enable ? "on" : "- ", rgblight_config.mode, + rgblight_config.hue, rgblight_config.sat, rgblight_config.val); + return rbf_info_str; +} +#endif diff --git a/keyboards/lily58/lib/timelogger.c b/keyboards/lily58/lib/timelogger.c new file mode 100644 index 0000000000..bfbfbe8a21 --- /dev/null +++ b/keyboards/lily58/lib/timelogger.c @@ -0,0 +1,16 @@ +#include <stdio.h> +#include "lily58.h" + +char timelog_str[24] = {}; +int last_time = 0; +int elapsed_time = 0; + +void set_timelog(void) { + elapsed_time = timer_elapsed(last_time); + last_time = timer_read(); + snprintf(timelog_str, sizeof(timelog_str), "lt:%5d, et:%5d", last_time, elapsed_time); +} + +const char *read_timelog(void) { + return timelog_str; +} diff --git a/keyboards/lily58/lily58.c b/keyboards/lily58/lily58.c index 697e3820c6..eacd90a82d 100644 --- a/keyboards/lily58/lily58.c +++ b/keyboards/lily58/lily58.c @@ -1 +1,10 @@ - #include "lily58.h" +#include "lily58.h" +#include "ssd1306.h" + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { +#ifdef SSD1306OLED + return process_record_gfx(keycode,record) && process_record_user(keycode, record); +#else + return process_record_user(keycode, record); +#endif +}
\ No newline at end of file diff --git a/keyboards/lily58/lily58.h b/keyboards/lily58/lily58.h index 1d64dd7b2a..064f847dd2 100644 --- a/keyboards/lily58/lily58.h +++ b/keyboards/lily58/lily58.h @@ -1,28 +1,5 @@ -#ifndef LILY58_H -#define LILY58_H - -#include "quantum.h" +#pragma once #ifdef KEYBOARD_lily58_rev1 #include "rev1.h" #endif - - - -// Used to create a keymap using only KC_ prefixed keys -#define LAYOUT_kc( \ - L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, L34, L35, L45, R40, R30, R31, R32, R33, R34, R35, \ - L41, L42, L43, L44, R41, R42, R43, R44 \ - ) \ - LAYOUT( \ - KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ - KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ - KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ - KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L45, KC_##R40, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \ - KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##R41, KC_##R42, KC_##R43, KC_##R44 \ - ) - -#endif diff --git a/keyboards/lily58/readme.md b/keyboards/lily58/readme.md index c71365e46b..cbf0c1eeb0 100644 --- a/keyboards/lily58/readme.md +++ b/keyboards/lily58/readme.md @@ -2,16 +2,14 @@ Lily58 is 6×4+5keys column-staggered split keyboard. - - - - + + Keyboard Maintainer: [Naoki Katahira](https://github.com/kata0510/) [Twitter:@F_YUUCHI](https://twitter.com/F_YUUCHI) Hardware Supported: Lily58 PCB, ProMicro Hardware Availability: [PCB & Case Data](https://github.com/kata0510/Lily58) Make example for this keyboard (after setting up your build environment): - make lily58:default + sudo make lily58:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/lily58/rev1/config.h b/keyboards/lily58/rev1/config.h index a991e88322..0dee6a6946 100644 --- a/keyboards/lily58/rev1/config.h +++ b/keyboards/lily58/rev1/config.h @@ -19,12 +19,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -//#include QMK_KEYBOARD_CONFIG_H -#include "config_common.h" - /* USB Device descriptor parameter */ #define VENDOR_ID 0xFC51 -#define PRODUCT_ID 0x0058 +#define PRODUCT_ID 0x0058 #define DEVICE_VER 0x0100 #define MANUFACTURER F_YUUCHI #define PRODUCT Lily58 @@ -51,9 +48,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DEBOUNCING_DELAY 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE +//#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE +//#define LOCKING_RESYNC_ENABLE /* key combination for command */ #define IS_COMMAND() ( \ @@ -62,8 +59,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D3 - -#define RGBLED_NUM 14 // Number of LEDs +#define RGBLED_NUM 12 // Number of LEDs /* * Feature disable options @@ -81,4 +77,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION +//#define NO_ACTION_FUNCTION
\ No newline at end of file diff --git a/keyboards/lily58/rev1/matrix.c b/keyboards/lily58/rev1/matrix.c new file mode 100755 index 0000000000..718cc57448 --- /dev/null +++ b/keyboards/lily58/rev1/matrix.c @@ -0,0 +1,357 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <string.h> +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" + +#ifdef USE_MATRIX_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "split_scomm.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; +uint8_t is_master = 0 ; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); +static uint8_t matrix_master_scan(void); + + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + TXLED0; + RXLED0; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + is_master = has_usb(); + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_MATRIX_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(int master_changed) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; +#ifdef SERIAL_USE_MULTI_TRANSACTION + int ret=serial_update_buffers(master_changed); +#else + int ret=serial_update_buffers(); +#endif + if (ret ) { + if(ret==2) RXLED1; + return 1; + } + RXLED0; + memcpy(&matrix[slaveOffset], + (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH); + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + if (is_master) { + matrix_master_scan(); + }else{ + matrix_slave_scan(); + int offset = (isLeftHand) ? ROWS_PER_HAND : 0; + memcpy(&matrix[offset], + (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH); + matrix_scan_quantum(); + } + return 1; +} + + +uint8_t matrix_master_scan(void) { + + int ret = _matrix_scan(); + int mchanged = 1; + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_MATRIX_I2C +// for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ +// i2c_slave_buffer[i] = matrix[offset+i]; +// } +#else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + mchanged = memcmp((void *)serial_master_buffer, + &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); + #endif + memcpy((void *)serial_master_buffer, + &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); +#endif + +#ifdef USE_MATRIX_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction(mchanged) ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + matrix_scan_quantum(); + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_MATRIX_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + int change = 0; + #endif + for (int i = 0; i < ROWS_PER_HAND; ++i) { + #ifdef SERIAL_USE_MULTI_TRANSACTION + if( serial_slave_buffer[i] != matrix[offset+i] ) + change = 1; + #endif + serial_slave_buffer[i] = matrix[offset+i]; + } + #ifdef SERIAL_USE_MULTI_TRANSACTION + slave_buffer_change_count += change; + #endif +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +static void init_cols(void) +{ + for(int x = 0; x < MATRIX_COLS; x++) { + _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/lily58/rev1/rev1.c b/keyboards/lily58/rev1/rev1.c index 4c54d7717c..e78f2ccfa5 100644 --- a/keyboards/lily58/rev1/rev1.c +++ b/keyboards/lily58/rev1/rev1.c @@ -1,14 +1,8 @@ #include "lily58.h" -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -};
\ No newline at end of file +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + //led_set_user(usb_led); +} +#endif
\ No newline at end of file diff --git a/keyboards/lily58/rev1/rev1.h b/keyboards/lily58/rev1/rev1.h index a830463582..4949bf5372 100644 --- a/keyboards/lily58/rev1/rev1.h +++ b/keyboards/lily58/rev1/rev1.h @@ -5,6 +5,10 @@ //void promicro_bootloader_jmp(bool program); #include "quantum.h" +#ifdef RGBLIGHT_ENABLE +//rgb led driver +#include "ws2812.h" +#endif #ifdef USE_I2C #include <stddef.h> diff --git a/keyboards/lily58/rev1/rules.mk b/keyboards/lily58/rev1/rules.mk index f845616741..7fc101bf2b 100644 --- a/keyboards/lily58/rev1/rules.mk +++ b/keyboards/lily58/rev1/rules.mk @@ -1 +1,3 @@ -BACKLIGHT_ENABLE = no
\ No newline at end of file +SRC += rev1/matrix.c +SRC += rev1/split_util.c +SRC += rev1/split_scomm.c
\ No newline at end of file diff --git a/keyboards/lily58/rev1/serial_config.h b/keyboards/lily58/rev1/serial_config.h new file mode 100755 index 0000000000..4fab8e8ddf --- /dev/null +++ b/keyboards/lily58/rev1/serial_config.h @@ -0,0 +1,4 @@ +#ifndef SOFT_SERIAL_PIN +#define SOFT_SERIAL_PIN D2 +#define SERIAL_USE_MULTI_TRANSACTION +#endif diff --git a/keyboards/lily58/rev1/split_scomm.c b/keyboards/lily58/rev1/split_scomm.c new file mode 100755 index 0000000000..a1fe6ba5b8 --- /dev/null +++ b/keyboards/lily58/rev1/split_scomm.c @@ -0,0 +1,91 @@ +#ifdef USE_SERIAL +#ifdef SERIAL_USE_MULTI_TRANSACTION +/* --- USE flexible API (using multi-type transaction function) --- */ + +#include <stdbool.h> +#include <stdint.h> +#include <stddef.h> +#include <split_scomm.h> +#include "serial.h" +#ifdef CONSOLE_ENABLE + #include <print.h> +#endif + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; +uint8_t volatile status_com = 0; +uint8_t volatile status1 = 0; +uint8_t slave_buffer_change_count = 0; +uint8_t s_change_old = 0xff; +uint8_t s_change_new = 0xff; + +SSTD_t transactions[] = { +#define GET_SLAVE_STATUS 0 + /* master buffer not changed, only recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + 0, NULL, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define PUT_MASTER_GET_SLAVE_STATUS 1 + /* master buffer changed need send, and recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define GET_SLAVE_BUFFER 2 + /* recive serial_slave_buffer */ + { (uint8_t *)&status1, + 0, NULL, + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + } +}; + +void serial_master_init(void) +{ + soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); +} + +void serial_slave_init(void) +{ + soft_serial_target_init(transactions, TID_LIMIT(transactions)); +} + +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers(int master_update) +{ + int status, smatstatus; + static int need_retry = 0; + + if( s_change_old != s_change_new ) { + smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); + if( smatstatus == TRANSACTION_END ) { + s_change_old = s_change_new; +#ifdef CONSOLE_ENABLE + uprintf("slave matrix = %b %b %b %b\n", + serial_slave_buffer[0], serial_slave_buffer[1], + serial_slave_buffer[2], serial_slave_buffer[3]); +#endif + } + } else { + // serial_slave_buffer dosen't change + smatstatus = TRANSACTION_END; // dummy status + } + + if( !master_update && !need_retry) { + status = soft_serial_transaction(GET_SLAVE_STATUS); + } else { + status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); + } + if( status == TRANSACTION_END ) { + s_change_new = slave_buffer_change_count; + need_retry = 0; + } else { + need_retry = 1; + } + return smatstatus; +} + +#endif // SERIAL_USE_MULTI_TRANSACTION +#endif /* USE_SERIAL */ diff --git a/keyboards/lily58/rev1/split_scomm.h b/keyboards/lily58/rev1/split_scomm.h new file mode 100755 index 0000000000..873d8939d8 --- /dev/null +++ b/keyboards/lily58/rev1/split_scomm.h @@ -0,0 +1,24 @@ +#ifndef SPLIT_COMM_H +#define SPLIT_COMM_H + +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ +#include "serial.h" + +#else +/* --- USE flexible API (using multi-type transaction function) --- */ +// Buffers for master - slave communication +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 + +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; +extern uint8_t slave_buffer_change_count; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(int master_changed); + +#endif + +#endif /* SPLIT_COMM_H */ diff --git a/keyboards/lily58/rev1/split_util.c b/keyboards/lily58/rev1/split_util.c new file mode 100755 index 0000000000..e1ff8b4379 --- /dev/null +++ b/keyboards/lily58/rev1/split_util.c @@ -0,0 +1,70 @@ +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/power.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <avr/eeprom.h> +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" + +#ifdef USE_MATRIX_I2C +# include "i2c.h" +#else +# include "split_scomm.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { + +#ifdef USE_MATRIX_I2C + i2c_master_init(); +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { + +#ifdef USE_MATRIX_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1<<VBUS)); //checks state of VBUS +} + +void split_keyboard_setup(void) { + setup_handedness(); + + if (has_usb()) { + keyboard_master_setup(); + } else { + keyboard_slave_setup(); + } + sei(); +} + +// this code runs before the usb and keyboard is initialized +void matrix_setup(void) { + split_keyboard_setup(); +} diff --git a/keyboards/lily58/rev1/split_util.h b/keyboards/lily58/rev1/split_util.h new file mode 100755 index 0000000000..687ca19bd3 --- /dev/null +++ b/keyboards/lily58/rev1/split_util.h @@ -0,0 +1,19 @@ +#ifndef SPLIT_KEYBOARD_UTIL_H +#define SPLIT_KEYBOARD_UTIL_H + +#include <stdbool.h> +#include "eeconfig.h" + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); + +void matrix_master_OLED_init (void); + +#endif diff --git a/keyboards/lily58/rules.mk b/keyboards/lily58/rules.mk index ad8ad585e9..f6b922eeac 100644 --- a/keyboards/lily58/rules.mk +++ b/keyboards/lily58/rules.mk @@ -1,7 +1,10 @@ -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c +SRC += i2c.c +SRC += serial.c +SRC += ssd1306.c + +# if firmware size over limit, try this option +# CFLAGS += -flto + # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -38,16 +41,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader # This definition is optional, and if your keyboard supports multiple bootloaders of # different sizes, comment this out, and the correct address will be loaded # automatically (+60). See bootloader.mk for all options. BOOTLOADER = caterina +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -65,7 +67,7 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SUBPROJECT_rev1 = no -USE_I2C = no +USE_I2C = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/lily58/serial.c b/keyboards/lily58/serial.c index f85dc28dc3..325c29a3f7 100644..100755 --- a/keyboards/lily58/serial.c +++ b/keyboards/lily58/serial.c @@ -1,5 +1,10 @@ /* * WARNING: be careful changing this code, it is very timing dependent + * + * 2018-10-28 checked + * avr-gcc 4.9.2 + * avr-gcc 5.4.0 + * avr-gcc 7.3.0 */ #ifndef F_CPU @@ -14,9 +19,58 @@ #include "serial.h" //#include <pro_micro.h> -#ifdef USE_SERIAL -//#ifndef USE_SERIAL_PD2 +#ifdef SOFT_SERIAL_PIN +#ifdef __AVR_ATmega32U4__ + // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. + #ifdef USE_I2C + #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 + #error Using ATmega32U4 I2C, so can not use PD0, PD1 + #endif + #endif + + #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 + #define SERIAL_PIN_DDR DDRD + #define SERIAL_PIN_PORT PORTD + #define SERIAL_PIN_INPUT PIND + #if SOFT_SERIAL_PIN == D0 + #define SERIAL_PIN_MASK _BV(PD0) + #define EIMSK_BIT _BV(INT0) + #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) + #define SERIAL_PIN_INTERRUPT INT0_vect + #elif SOFT_SERIAL_PIN == D1 + #define SERIAL_PIN_MASK _BV(PD1) + #define EIMSK_BIT _BV(INT1) + #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) + #define SERIAL_PIN_INTERRUPT INT1_vect + #elif SOFT_SERIAL_PIN == D2 + #define SERIAL_PIN_MASK _BV(PD2) + #define EIMSK_BIT _BV(INT2) + #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) + #define SERIAL_PIN_INTERRUPT INT2_vect + #elif SOFT_SERIAL_PIN == D3 + #define SERIAL_PIN_MASK _BV(PD3) + #define EIMSK_BIT _BV(INT3) + #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) + #define SERIAL_PIN_INTERRUPT INT3_vect + #endif + #elif SOFT_SERIAL_PIN == E6 + #define SERIAL_PIN_DDR DDRE + #define SERIAL_PIN_PORT PORTE + #define SERIAL_PIN_INPUT PINE + #define SERIAL_PIN_MASK _BV(PE6) + #define EIMSK_BIT _BV(INT6) + #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) + #define SERIAL_PIN_INTERRUPT INT6_vect + #else + #error invalid SOFT_SERIAL_PIN value + #endif + +#else + #error serial.c now support ATmega32U4 only +#endif + +//////////////// for backward compatibility //////////////////////////////// #ifndef SERIAL_USE_MULTI_TRANSACTION /* --- USE Simple API (OLD API, compatible with let's split serial.c) */ #if SERIAL_SLAVE_BUFFER_LENGTH > 0 @@ -43,56 +97,118 @@ SSTD_t transactions[] = { }; void serial_master_init(void) -{ soft_serial_initiator_init(transactions); } +{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } void serial_slave_init(void) -{ soft_serial_target_init(transactions); } +{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } // 0 => no error // 1 => slave did not respond // 2 => checksum error int serial_update_buffers() -{ return soft_serial_transaction(); } +{ + int result; + result = soft_serial_transaction(); + return result; +} -#endif // Simple API (OLD API, compatible with let's split serial.c) +#endif // end of Simple API (OLD API, compatible with let's split serial.c) +//////////////////////////////////////////////////////////////////////////// #define ALWAYS_INLINE __attribute__((always_inline)) #define NO_INLINE __attribute__((noinline)) #define _delay_sub_us(x) __builtin_avr_delay_cycles(x) -// Serial pulse period in microseconds. -#define TID_SEND_ADJUST 14 +// parity check +#define ODD_PARITY 1 +#define EVEN_PARITY 0 +#define PARITY EVEN_PARITY + +#ifdef SERIAL_DELAY + // custom setup in config.h + // #define TID_SEND_ADJUST 2 + // #define SERIAL_DELAY 6 // micro sec + // #define READ_WRITE_START_ADJUST 30 // cycles + // #define READ_WRITE_WIDTH_ADJUST 8 // cycles +#else +// ============ Standard setups ============ + +#ifndef SELECT_SOFT_SERIAL_SPEED +#define SELECT_SOFT_SERIAL_SPEED 1 +// 0: about 189kbps +// 1: about 137kbps (default) +// 2: about 75kbps +// 3: about 39kbps +// 4: about 26kbps +// 5: about 20kbps +#endif -#define SELECT_SERIAL_SPEED 1 -#if SELECT_SERIAL_SPEED == 0 +#if __GNUC__ < 6 + #define TID_SEND_ADJUST 14 +#else + #define TID_SEND_ADJUST 2 +#endif + +#if SELECT_SOFT_SERIAL_SPEED == 0 // Very High speed #define SERIAL_DELAY 4 // micro sec - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles -#elif SELECT_SERIAL_SPEED == 1 + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 34 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 1 // High speed #define SERIAL_DELAY 6 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles -#elif SELECT_SERIAL_SPEED == 2 + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 30 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 2 // Middle speed #define SERIAL_DELAY 12 // micro sec #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles -#elif SELECT_SERIAL_SPEED == 3 + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 3 // Low speed #define SERIAL_DELAY 24 // micro sec #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles -#elif SELECT_SERIAL_SPEED == 4 + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 4 // Very Low speed - #define SERIAL_DELAY 50 // micro sec + #define SERIAL_DELAY 36 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 5 + // Ultra Low speed + #define SERIAL_DELAY 48 // micro sec #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif #else -#error Illegal Serial Speed -#endif - +#error invalid SELECT_SOFT_SERIAL_SPEED value +#endif /* SELECT_SOFT_SERIAL_SPEED */ +#endif /* SERIAL_DELAY */ #define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) #define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) @@ -106,17 +222,21 @@ int serial_update_buffers() #endif static SSTD_t *Transaction_table = NULL; +static uint8_t Transaction_table_size = 0; +inline static void serial_delay(void) ALWAYS_INLINE; inline static void serial_delay(void) { _delay_us(SERIAL_DELAY); } +inline static void serial_delay_half1(void) ALWAYS_INLINE; inline static void serial_delay_half1(void) { _delay_us(SERIAL_DELAY_HALF1); } +inline static void serial_delay_half2(void) ALWAYS_INLINE; inline static void serial_delay_half2(void) { _delay_us(SERIAL_DELAY_HALF2); @@ -136,6 +256,7 @@ void serial_input_with_pullup(void) { SERIAL_PIN_PORT |= SERIAL_PIN_MASK; } +inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; inline static uint8_t serial_read_pin(void) { return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); @@ -153,30 +274,28 @@ void serial_high(void) { SERIAL_PIN_PORT |= SERIAL_PIN_MASK; } -void soft_serial_initiator_init(SSTD_t *sstd_table) +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) { Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; serial_output(); serial_high(); } -void soft_serial_target_init(SSTD_t *sstd_table) +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) { Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; serial_input_with_pullup(); -#if SERIAL_PIN_MASK == _BV(PD0) - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -#elif SERIAL_PIN_MASK == _BV(PD2) - // Enable INT2 - EIMSK |= _BV(INT2); - // Trigger on falling edge of INT2 - EICRA &= ~(_BV(ISC20) | _BV(ISC21)); + // Enable INT0-INT3,INT6 + EIMSK |= EIMSK_BIT; +#if SERIAL_PIN_MASK == _BV(PE6) + // Trigger on falling edge of INT6 + EICRB &= EICRx_BIT; #else - #error unknown SERIAL_PIN_MASK value + // Trigger on falling edge of INT0-INT3 + EICRA &= EICRx_BIT; #endif } @@ -192,7 +311,7 @@ void sync_recv(void) { } // Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void)NO_INLINE; +static void sync_send(void) NO_INLINE; static void sync_send(void) { serial_low(); @@ -206,12 +325,12 @@ static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { uint8_t byte, i, p, pb; _delay_sub_us(READ_WRITE_START_ADJUST); - for( i = 0, byte = 0, p = 0; i < bit; i++ ) { + for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { serial_delay_half1(); // read the middle of pulses if( serial_read_pin() ) { - byte = (byte << 1) | 1; p ^= 1; + byte = (byte << 1) | 1; p ^= 1; } else { - byte = (byte << 1) | 0; p ^= 0; + byte = (byte << 1) | 0; p ^= 0; } _delay_sub_us(READ_WRITE_WIDTH_ADJUST); serial_delay_half2(); @@ -231,13 +350,13 @@ static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; void serial_write_chunk(uint8_t data, uint8_t bit) { uint8_t b, p; - for( p = 0, b = 1<<(bit-1); b ; b >>= 1) { - if(data & b) { - serial_high(); p ^= 1; - } else { - serial_low(); p ^= 0; - } - serial_delay(); + for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { + if(data & b) { + serial_high(); p ^= 1; + } else { + serial_low(); p ^= 0; + } + serial_delay(); } /* send parity bit */ if(p & 1) { serial_high(); } @@ -289,6 +408,13 @@ void change_reciver2sender(void) { serial_delay_half1(); //4 } +static inline uint8_t nibble_bits_count(uint8_t bits) +{ + bits = (bits & 0x5) + (bits >> 1 & 0x5); + bits = (bits & 0x3) + (bits >> 2 & 0x3); + return bits; +} + // interrupt handle to be used by the target device ISR(SERIAL_PIN_INTERRUPT) { @@ -298,12 +424,15 @@ ISR(SERIAL_PIN_INTERRUPT) { SSTD_t *trans = Transaction_table; #else // recive transaction table index - uint8_t tid; + uint8_t tid, bits; uint8_t pecount = 0; sync_recv(); - tid = serial_read_chunk(&pecount,4); - if(pecount> 0) + bits = serial_read_chunk(&pecount,7); + tid = bits>>3; + bits = (bits&7) != nibble_bits_count(tid); + if( bits || pecount> 0 || tid > Transaction_table_size ) { return; + } serial_delay_half1(); serial_high(); // response step1 low->high @@ -316,17 +445,17 @@ ISR(SERIAL_PIN_INTERRUPT) { // target send phase if( trans->target2initiator_buffer_size > 0 ) serial_send_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size); + trans->target2initiator_buffer_size); // target switch to input change_sender2reciver(); // target recive phase if( trans->initiator2target_buffer_size > 0 ) { if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size) ) { - *trans->status = TRANSACTION_ACCEPTED; + trans->initiator2target_buffer_size) ) { + *trans->status = TRANSACTION_ACCEPTED; } else { - *trans->status = TRANSACTION_DATA_ERROR; + *trans->status = TRANSACTION_DATA_ERROR; } } else { *trans->status = TRANSACTION_ACCEPTED; @@ -350,6 +479,8 @@ int soft_serial_transaction(void) { SSTD_t *trans = Transaction_table; #else int soft_serial_transaction(int sstd_index) { + if( sstd_index > Transaction_table_size ) + return TRANSACTION_TYPE_ERROR; SSTD_t *trans = &Transaction_table[sstd_index]; #endif cli(); @@ -376,9 +507,10 @@ int soft_serial_transaction(int sstd_index) { #else // send transaction table index + int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); sync_send(); _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(sstd_index, 4); + serial_write_chunk(tid, 7); serial_delay_half1(); // wait for the target response (step1 low->high) @@ -390,12 +522,12 @@ int soft_serial_transaction(int sstd_index) { // check if the target is present (step2 high->low) for( int i = 0; serial_read_pin(); i++ ) { if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; + // slave failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; } _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); } @@ -405,12 +537,12 @@ int soft_serial_transaction(int sstd_index) { // if the target is present syncronize with it if( trans->target2initiator_buffer_size > 0 ) { if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size) ) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; + trans->target2initiator_buffer_size) ) { + serial_output(); + serial_high(); + *trans->status = TRANSACTION_DATA_ERROR; + sei(); + return TRANSACTION_DATA_ERROR; } } @@ -420,7 +552,7 @@ int soft_serial_transaction(int sstd_index) { // initiator send phase if( trans->initiator2target_buffer_size > 0 ) { serial_send_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size); + trans->initiator2target_buffer_size); } // always, release the line when not in use @@ -443,3 +575,16 @@ int soft_serial_get_and_clean_status(int sstd_index) { #endif #endif + +// Helix serial.c history +// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) +// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) +// (adjusted with avr-gcc 4.9.2) +// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) +// (adjusted with avr-gcc 4.9.2) +// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) +// (adjusted with avr-gcc 4.9.2) +// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) +// (adjusted with avr-gcc 7.3.0) +// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) +// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/lily58/serial.h b/keyboards/lily58/serial.h index d2b7fd8e60..7e0c0847a4 100644..100755 --- a/keyboards/lily58/serial.h +++ b/keyboards/lily58/serial.h @@ -4,14 +4,16 @@ #include <stdbool.h> // ///////////////////////////////////////////////////////////////// -// Need Soft Serial defines in serial_config.h +// Need Soft Serial defines in config.h // ///////////////////////////////////////////////////////////////// // ex. -// #define SERIAL_PIN_DDR DDRD -// #define SERIAL_PIN_PORT PORTD -// #define SERIAL_PIN_INPUT PIND -// #define SERIAL_PIN_MASK _BV(PD?) ?=0,2 -// #define SERIAL_PIN_INTERRUPT INT?_vect ?=0,2 +// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 +// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 +// // 1: about 137kbps (default) +// // 2: about 75kbps +// // 3: about 39kbps +// // 4: about 26kbps +// // 5: about 20kbps // // //// USE Simple API (OLD API, compatible with let's split serial.c) // ex. @@ -47,16 +49,18 @@ typedef struct _SSTD_t { uint8_t target2initiator_buffer_size; uint8_t *target2initiator_buffer; } SSTD_t; +#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) // initiator is transaction start side -void soft_serial_initiator_init(SSTD_t *sstd_table); +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); // target is interrupt accept side -void soft_serial_target_init(SSTD_t *sstd_table); +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); // initiator resullt #define TRANSACTION_END 0 #define TRANSACTION_NO_RESPONSE 0x1 #define TRANSACTION_DATA_ERROR 0x2 +#define TRANSACTION_TYPE_ERROR 0x4 #ifndef SERIAL_USE_MULTI_TRANSACTION int soft_serial_transaction(void); #else @@ -72,7 +76,7 @@ int soft_serial_transaction(int sstd_index); // target: // TRANSACTION_DATA_ERROR // or TRANSACTION_ACCEPTED -#define TRANSACTION_ACCEPTED 0x4 +#define TRANSACTION_ACCEPTED 0x8 #ifdef SERIAL_USE_MULTI_TRANSACTION int soft_serial_get_and_clean_status(int sstd_index); #endif diff --git a/keyboards/lily58/serial_config.h b/keyboards/lily58/serial_config.h index fef689038e..4fab8e8ddf 100644 --- a/keyboards/lily58/serial_config.h +++ b/keyboards/lily58/serial_config.h @@ -1,8 +1,4 @@ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD2) -#define SERIAL_PIN_INTERRUPT INT2_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH 1
\ No newline at end of file +#ifndef SOFT_SERIAL_PIN +#define SOFT_SERIAL_PIN D2 +#define SERIAL_USE_MULTI_TRANSACTION +#endif diff --git a/keyboards/lily58/ssd1306.c b/keyboards/lily58/ssd1306.c new file mode 100755 index 0000000000..4330c8497d --- /dev/null +++ b/keyboards/lily58/ssd1306.c @@ -0,0 +1,344 @@ +#ifdef SSD1306OLED + +#include "ssd1306.h" +#include "i2c.h" +#include <string.h> +#include "print.h" +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "timer.h" + +static const unsigned char font[] PROGMEM; + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ + +// 'last_flush' is declared as uint16_t, +// so this must be less than 65535 +#define ScreenOffInterval 60000 /* milliseconds */ +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +static bool force_dirty = true; + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(SSD1306_ADDRESS)) { + xprintf("failed to start write to %d\n", SSD1306_ADDRESS); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} +#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(bool rotate) { + bool success = false; + + i2c_master_init(); + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + + if(rotate){ + // the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); + }else{ + // Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); + } + + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) { + char data_ln[strlen(data)+2]; + snprintf(data_ln, sizeof(data_ln), "%s\n", data); + matrix_write(matrix, data_ln); +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } + + // 1 column of space between chars (it's not included in the glyph) + //i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_master_stop(); +#if DEBUG_TO_SCREEN + --displaying; +#endif +} + +void iota_gfx_flush(void) { + matrix_render(&display); +} + +__attribute__ ((weak)) +void iota_gfx_task_user(void) { +} + +void iota_gfx_task(void) { + iota_gfx_task_user(); + + if (display.dirty|| force_dirty) { + iota_gfx_flush(); + force_dirty = false; + } + + if (timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } +} + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { + force_dirty = true; + return true; +} + +#endif diff --git a/keyboards/lily58/ssd1306.h b/keyboards/lily58/ssd1306.h new file mode 100755 index 0000000000..ea8c923280 --- /dev/null +++ b/keyboards/lily58/ssd1306.h @@ -0,0 +1,91 @@ +#pragma once + +#include <stdbool.h> +#include <stdio.h> +#include "pincontrol.h" +#include "action.h" + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + +// Controls the SSD1306 128x32 OLED display via i2c + +#ifndef SSD1306_ADDRESS +#define SSD1306_ADDRESS 0x3C +#endif + +#define DisplayHeight 32 +#define DisplayWidth 128 + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +struct CharacterMatrix display; + +bool iota_gfx_init(bool rotate); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +void iota_gfx_task_user(void); + +void matrix_clear(struct CharacterMatrix *matrix); +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write(struct CharacterMatrix *matrix, const char *data); +void matrix_write_ln(struct CharacterMatrix *matrix, const char *data); +void matrix_write_P(struct CharacterMatrix *matrix, const char *data); +void matrix_render(struct CharacterMatrix *matrix); + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record);
\ No newline at end of file |