diff options
Diffstat (limited to 'keyboards/mechwild')
27 files changed, 992 insertions, 20 deletions
diff --git a/keyboards/mechwild/bde/lefty/rules.mk b/keyboards/mechwild/bde/lefty/rules.mk index 6ba908ad55..ba23033c82 100644 --- a/keyboards/mechwild/bde/lefty/rules.mk +++ b/keyboards/mechwild/bde/lefty/rules.mk @@ -12,10 +12,7 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover +NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mechwild/bde/righty/rules.mk b/keyboards/mechwild/bde/righty/rules.mk index 6ba908ad55..ba23033c82 100644 --- a/keyboards/mechwild/bde/righty/rules.mk +++ b/keyboards/mechwild/bde/righty/rules.mk @@ -12,10 +12,7 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover +NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mechwild/mercutio/keymaps/fearless_spiff/config.h b/keyboards/mechwild/mercutio/keymaps/fearless_spiff/config.h new file mode 100644 index 0000000000..9d588ed8c0 --- /dev/null +++ b/keyboards/mechwild/mercutio/keymaps/fearless_spiff/config.h @@ -0,0 +1,19 @@ +/* Copyright 2022 Fearless Spiff + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define TAPPING_TERM 180 diff --git a/keyboards/mechwild/mercutio/keymaps/fearless_spiff/keymap.c b/keyboards/mechwild/mercutio/keymaps/fearless_spiff/keymap.c new file mode 100644 index 0000000000..ada92103c3 --- /dev/null +++ b/keyboards/mechwild/mercutio/keymaps/fearless_spiff/keymap.c @@ -0,0 +1,293 @@ +/* Copyright 2021 Kyle McCreery + * Copyright 2021 Jonavin Eng + * Copyright 2022 Fearless Spiff + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +#include "keymap_german.h" + +// OLED setup for bongocat +#define IDLE_FRAMES 5 +#define IDLE_SPEED 30 +#define TAP_FRAMES 2 +#define TAP_SPEED 40 +#define ANIM_FRAME_DURATION 200 +#define ANIM_SIZE 512 + +#define LABEL_LENGTH 8 + +#define KC_CAD LALT(LCTL(KC_DEL)) +#define KC_TEAMS_CAM C(S(KC_O)) +#define KC_TEAMS_MUTE C(S(KC_M)) + +enum layers { + QWERT, + FN_1, + FN_2 +}; + +enum custom_user_keycodes { + KC_ENC = SAFE_RANGE +}; + +static long int oled_timeout = 1800000; // 30 minutes +bool gui_on = true; +char wpm_str[10]; +uint32_t anim_timer = 0; +uint32_t anim_sleep = 0; +uint8_t current_idle_frame = 0; +uint8_t current_tap_frame = 0; + +// Tap Dance declarations +enum { + TD_TAB_ESC, +}; + +// Tap Dance definitions +qk_tap_dance_action_t tap_dance_actions[] = { + // Tap once for Tab, twice for Esc + [TD_TAB_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_TAB, KC_ESC), +}; + +typedef struct { + char label_top[LABEL_LENGTH]; + char label_mid[LABEL_LENGTH]; + char label_bottom[LABEL_LENGTH]; + uint16_t keycode; +} encoder_key; + +static const encoder_key PROGMEM encoder_keys[] = { + // list of key codes that will be scrolled through by encoder and description + // Be aware that it only works when using one char less than defined. In this case 7 max. No idea why? + {"Teams", "Toggle", "Mic", KC_TEAMS_MUTE}, + {"Teams", "Toggle", "Cam", KC_TEAMS_CAM}, + {"Ctrl", "Alt", "Del", KC_CAD}, + {"Caps", "Lock", "", KC_CAPSLOCK}, + {"Pause", "", "", KC_PAUSE}, + {"PrtScr", "", "", KC_PSCR}, + {"Insert", "", "", KC_INS}, + {"Play", "", "", KC_MEDIA_PLAY_PAUSE} +}; + +#define NUMBER_OF_ENCODER_KEYS sizeof(encoder_keys)/sizeof(encoder_keys[0]) + +static uint8_t selected_encoder_key_id = 0; +static encoder_key selected_encoder_key; + +static void set_selected_encoder_key(uint8_t idx) { + // make a copy from PROGMEM + memcpy_P (&selected_encoder_key, &encoder_keys[idx], sizeof selected_encoder_key); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_ENC: + if (record->event.pressed) { + tap_code16(selected_encoder_key.keycode); + } + break; + } + return true; +} + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [QWERT] = LAYOUT_all( + KC_ENC, + TD(TD_TAB_ESC), KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_PLUS, KC_ENT, + KC_LSFT, DE_LABK, DE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, LT(2,KC_SPC), LT(2,KC_SPC), LT(2,KC_SPC), KC_RALT, DE_MINS, KC_RCTL ), + + [FN_1] = LAYOUT_all( + KC_MUTE, + KC_GESC, _______, _______, _______, DE_LCBR, DE_RCBR, _______, DE_UDIA, KC_UP, DE_ODIA, DE_QUES, KC_DEL, + _______, DE_ADIA, DE_SS, _______, DE_LPRN, DE_RPRN, _______, KC_LEFT, KC_DOWN, KC_RIGHT, DE_HASH, _______, + _______, DE_CIRC, DE_ACUT, _______, _______, DE_LBRC, DE_RBRC, KC_HOME, KC_END, DE_QUOT, DE_DQUO, DE_EQL, + _______, _______, _______, _______, _______, _______, DE_BSLS, DE_SLSH, DE_TILD ), + + [FN_2] = LAYOUT_all( + _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_BSPC, + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ) +}; + +#ifdef ENCODER_ENABLE + bool encoder_update_user(uint8_t index, bool clockwise) { + if (clockwise) { + if (IS_LAYER_ON(QWERT) && selected_encoder_key_id < NUMBER_OF_ENCODER_KEYS-1) { + selected_encoder_key_id ++; + set_selected_encoder_key(selected_encoder_key_id); + } + if (IS_LAYER_ON(FN_1)) { + tap_code16(KC_PGDOWN); + } + if (IS_LAYER_ON(FN_2)) { + tap_code(KC_VOLU); + } + } else { + if (IS_LAYER_ON(QWERT) && selected_encoder_key_id > 0) { + selected_encoder_key_id --; + set_selected_encoder_key(selected_encoder_key_id); + } + if (IS_LAYER_ON(FN_1)) { + tap_code16(KC_PGUP); + } + if (IS_LAYER_ON(FN_2)) { + tap_code(KC_VOLD); + } + } + return true; + } +#endif + +#ifdef OLED_ENABLE + oled_rotation_t oled_init_user(oled_rotation_t rotation) { + set_selected_encoder_key(selected_encoder_key_id); + + return OLED_ROTATION_180; // flips the display 180 degrees + } + + static void render_anim(void) { + + // Idle animation + static const char PROGMEM idle[IDLE_FRAMES][ANIM_SIZE] = { + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,16,8,8,4,4,4,8,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,24,100,130,2,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,192,56,4,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,16,8,8,4,4,4,8,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,24,100,130,2,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,192,56,4,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8, + 7,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,64,64,64,64,32,32,32,32,16,8,4,2,2,4,24,96,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,60,194,1,1,2,2,4,4,2,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,96,96,0,129,130,130,132,8,16,32,64,128,0,0,0,0,128,128,128,128,64,64,64,64,32, + 32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,25,6,0,0,0,0,0,0,0,24,24,24,27,3,0,64,160,34,36,20,18,18,18,11,8,8,8,8,5,5,9,9,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + + { + 0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8, + 7,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,8,4,2,2,2,4,56,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,28,226,1,1,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64,64,64, + 32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + } + + }; + + // Prep animation + static const char PROGMEM prep[][ANIM_SIZE] = { + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,129,128,128,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,225,26,6,9,49,53,1,138,124,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,24,6,5,152,153,132,195,124,65,65,64,64,32,33,34,18,17,17,17,9,8,8,8,8,4,4,4,4,4,4,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + } + + }; + + // Typing animation + static const char PROGMEM tap[TAP_FRAMES][ANIM_SIZE] = { + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,248,248,248,248,0,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,129,128,128,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,1,2,4,8,16,32,67,135,7,1,0,184,188,190,159, + 95,95,79,76,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,24,6,5,152,153,132,67,124,65,65,64,64,32,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,61,124,252,252,252,252,252,60,12,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1, + 1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,225,26,6,9,49,53,1,138,124,0,0,128,128,128,128,64,64,64,64,32, + 32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,0,0,0,1,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,4,4,4,4,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,122,122,121,121,121,121,57,49,2,2,4,4,8,8,8,136,136,135,128, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + } + + }; + + void animation_phase(void) { + if (get_current_wpm() <= IDLE_SPEED) { + current_idle_frame = (current_idle_frame + 1) % IDLE_FRAMES; + oled_write_raw_P(idle[abs((IDLE_FRAMES-1)-current_idle_frame)], ANIM_SIZE); + } + + if (get_current_wpm() > IDLE_SPEED && get_current_wpm() < TAP_SPEED) { + oled_write_raw_P(prep[0], ANIM_SIZE); + } + + if (get_current_wpm() >= TAP_SPEED) { + current_tap_frame = (current_tap_frame + 1) % TAP_FRAMES; + oled_write_raw_P(tap[abs((TAP_FRAMES-1)-current_tap_frame)], ANIM_SIZE); + } + } + + if (get_current_wpm() != 000) { + oled_on(); + + if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { + anim_timer = timer_read32(); + animation_phase(); + } + + anim_sleep = timer_read32(); + } else { + if (timer_elapsed32(anim_sleep) > oled_timeout) { + oled_off(); + } else { + if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { + anim_timer = timer_read32(); + animation_phase(); + } + } + } + } + + bool oled_task_user(void) { + + render_anim(); + + oled_set_cursor(0,0); + oled_write(selected_encoder_key.label_top, false); + + oled_set_cursor(0,1); + oled_write(selected_encoder_key.label_mid, false); + + oled_set_cursor(0,2); + oled_write(selected_encoder_key.label_bottom, false); + + /* hide wpm display for now + oled_set_cursor(13,3); + oled_write_P(PSTR("WPM: "), false); + oled_write(get_u8_str(get_current_wpm(), ' '), false); + */ + + return true; + } + + void suspend_power_down_user(void) { + oled_off(); + } +#endif diff --git a/keyboards/mechwild/mercutio/keymaps/fearless_spiff/readme.md b/keyboards/mechwild/mercutio/keymaps/fearless_spiff/readme.md new file mode 100644 index 0000000000..33240ffbcd --- /dev/null +++ b/keyboards/mechwild/mercutio/keymaps/fearless_spiff/readme.md @@ -0,0 +1,24 @@ +Fearless Spiff's Custom Mercutio Keymap + - "Programmer"-centric and German layout based keymap + - Based on Bongocat and Jonavin keymap + +Features + - Fancy Bongocat! Yay! (borrowed from bongocat obviously) + - Encoder selectable key codes and displayed on OLED (borrowed and multi-line-enhanced from Jonavin) + - Change encoder_keys in keymap.c to assign your desired key selection + - Additional encoder functionality + - While holding FN_1, page up and down + - While holding FN_2, volume up and down + - Use my templates for your own layout overview at [Keyboard Layout Editor](http://www.keyboard-layout-editor.com) using my gist [here](https://gist.github.com/FearlessSpiff) + +QWERT Layer + + +FN_1 Layer + + +FN_2 layer + + + + diff --git a/keyboards/mechwild/mercutio/keymaps/fearless_spiff/rules.mk b/keyboards/mechwild/mercutio/keymaps/fearless_spiff/rules.mk new file mode 100644 index 0000000000..16f26944e8 --- /dev/null +++ b/keyboards/mechwild/mercutio/keymaps/fearless_spiff/rules.mk @@ -0,0 +1,7 @@ +WPM_ENABLE = yes +TAP_DANCE_ENABLE = yes +VIA_ENABLE = no +MOUSEKEY_ENABLE = no +EXTRAKEY_ENABLE = yes # Audio control and System control +KEY_LOCK_ENABLE = no +CONSOLE_ENABLE = no diff --git a/keyboards/mechwild/mercutio/rules.mk b/keyboards/mechwild/mercutio/rules.mk index 66bdc206b2..cba3861f34 100644 --- a/keyboards/mechwild/mercutio/rules.mk +++ b/keyboards/mechwild/mercutio/rules.mk @@ -12,10 +12,7 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mechwild/murphpad/rules.mk b/keyboards/mechwild/murphpad/rules.mk index cac073573b..2210965970 100644 --- a/keyboards/mechwild/murphpad/rules.mk +++ b/keyboards/mechwild/murphpad/rules.mk @@ -12,10 +12,7 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mechwild/obe/rules.mk b/keyboards/mechwild/obe/rules.mk index 0b3a24b7fd..d5fac1ee4e 100644 --- a/keyboards/mechwild/obe/rules.mk +++ b/keyboards/mechwild/obe/rules.mk @@ -6,10 +6,7 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mechwild/waka60/config.h b/keyboards/mechwild/waka60/config.h new file mode 100644 index 0000000000..636e13de38 --- /dev/null +++ b/keyboards/mechwild/waka60/config.h @@ -0,0 +1,143 @@ +/* +Copyright 2021 Kyle McCreery + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6D77 // mw = "MechWild" +#define PRODUCT_ID 0x1709 +#define DEVICE_VER 0x0101 +#define MANUFACTURER MechWild +#define PRODUCT Waka60 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 7 + +#define EEPROM_I2C_24LC64 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B8, B4, B3, B9, A15, B12, B13, B14, B15, A8 } +#define MATRIX_COL_PINS { B10, B1, B0, A7, A6, A5, A4 } +#define UNUSED_PINS + +/* encoder pins */ +#define ENCODERS_PAD_A { A3 } +#define ENCODERS_PAD_B { A2 } + +/* encoder resolution */ +#define ENCODER_RESOLUTION 4 +#define TAP_CODE_DELAY 10 + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* RGB settings, uncomment this define to enable RGB */ +#define RGB_DI_PIN A1 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 3 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/mechwild/waka60/f401/halconf.h b/keyboards/mechwild/waka60/f401/halconf.h new file mode 100644 index 0000000000..25309fc70f --- /dev/null +++ b/keyboards/mechwild/waka60/f401/halconf.h @@ -0,0 +1,25 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define HAL_USE_I2C TRUE +#define HAL_USE_PWM TRUE +#define HAL_USE_PAL TRUE +#define HAL_USE_GPT TRUE + +#include_next <halconf.h> + diff --git a/keyboards/mechwild/waka60/f401/mcuconf.h b/keyboards/mechwild/waka60/f401/mcuconf.h new file mode 100644 index 0000000000..95339690cf --- /dev/null +++ b/keyboards/mechwild/waka60/f401/mcuconf.h @@ -0,0 +1,27 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include_next <mcuconf.h> + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE
\ No newline at end of file diff --git a/keyboards/mechwild/waka60/f401/rules.mk b/keyboards/mechwild/waka60/f401/rules.mk new file mode 100644 index 0000000000..f1304648f0 --- /dev/null +++ b/keyboards/mechwild/waka60/f401/rules.mk @@ -0,0 +1,5 @@ +# MCU name +MCU = STM32F401 + +# Bootloader selection +BOOTLOADER = stm32-dfu diff --git a/keyboards/mechwild/waka60/f411/halconf.h b/keyboards/mechwild/waka60/f411/halconf.h new file mode 100644 index 0000000000..b57977316a --- /dev/null +++ b/keyboards/mechwild/waka60/f411/halconf.h @@ -0,0 +1,22 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define HAL_USE_I2C TRUE + +#include_next <halconf.h> + diff --git a/keyboards/mechwild/waka60/f411/mcuconf.h b/keyboards/mechwild/waka60/f411/mcuconf.h new file mode 100644 index 0000000000..a00131aca5 --- /dev/null +++ b/keyboards/mechwild/waka60/f411/mcuconf.h @@ -0,0 +1,23 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include_next <mcuconf.h> + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + diff --git a/keyboards/mechwild/waka60/f411/rules.mk b/keyboards/mechwild/waka60/f411/rules.mk new file mode 100644 index 0000000000..b32a8b7f5b --- /dev/null +++ b/keyboards/mechwild/waka60/f411/rules.mk @@ -0,0 +1,5 @@ +# MCU name +MCU = STM32F411 + +# Bootloader selection +BOOTLOADER = stm32-dfu diff --git a/keyboards/mechwild/waka60/info.json b/keyboards/mechwild/waka60/info.json new file mode 100644 index 0000000000..87549849b9 --- /dev/null +++ b/keyboards/mechwild/waka60/info.json @@ -0,0 +1,73 @@ +{ + "keyboard_name": "MechWild Waka60", + "url": "mechwild.com", + "maintainer": "Kyle McCreery", + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "k00", "x": 0, "y": 0}, + {"label": "k01", "x": 1, "y": 0}, + {"label": "k02", "x": 2, "y": 0}, + {"label": "k03", "x": 3, "y": 0}, + {"label": "k04", "x": 4, "y": 0}, + {"label": "k05", "x": 5, "y": 0}, + {"label": "k50", "x": 7, "y": 0}, + {"label": "k51", "x": 8, "y": 0}, + {"label": "k52", "x": 9, "y": 0}, + {"label": "k53", "x": 10, "y": 0}, + {"label": "k54", "x": 11, "y": 0}, + {"label": "k55", "x": 12, "y": 0}, + {"label": "k10", "x": 0, "y": 1}, + {"label": "k11", "x": 1, "y": 1}, + {"label": "k12", "x": 2, "y": 1}, + {"label": "k13", "x": 3, "y": 1}, + {"label": "k14", "x": 4, "y": 1}, + {"label": "k15", "x": 5, "y": 1}, + {"label": "k60", "x": 7, "y": 1}, + {"label": "k61", "x": 8, "y": 1}, + {"label": "k62", "x": 9, "y": 1}, + {"label": "k63", "x": 10, "y": 1}, + {"label": "k64", "x": 11, "y": 1}, + {"label": "k65", "x": 12, "y": 1}, + {"label": "k20", "x": 0, "y": 2}, + {"label": "k21", "x": 1, "y": 2}, + {"label": "k22", "x": 2, "y": 2}, + {"label": "k23", "x": 3, "y": 2}, + {"label": "k24", "x": 4, "y": 2}, + {"label": "k25", "x": 5, "y": 2}, + {"label": "k70", "x": 7, "y": 2}, + {"label": "k71", "x": 8, "y": 2}, + {"label": "k72", "x": 9, "y": 2}, + {"label": "k73", "x": 10, "y": 2}, + {"label": "k74", "x": 11, "y": 2}, + {"label": "k75", "x": 12, "y": 2}, + {"label": "k30", "x": 0, "y": 3}, + {"label": "k31", "x": 1, "y": 3}, + {"label": "k32", "x": 2, "y": 3}, + {"label": "k33", "x": 3, "y": 3}, + {"label": "k34", "x": 4, "y": 3}, + {"label": "k35", "x": 5, "y": 3}, + {"label": "k36", "x": 6, "y": 3}, + {"label": "k80", "x": 7, "y": 3}, + {"label": "k81", "x": 8, "y": 3}, + {"label": "k82", "x": 9, "y": 3}, + {"label": "k83", "x": 10, "y": 3}, + {"label": "k84", "x": 11, "y": 3}, + {"label": "k85", "x": 12, "y": 3}, + {"label": "k40", "x": 0, "y": 4}, + {"label": "k41", "x": 1, "y": 4}, + {"label": "k42", "x": 2, "y": 4}, + {"label": "k43", "x": 3, "y": 4}, + {"label": "k44", "x": 4, "y": 4}, + {"label": "k45", "x": 5, "y": 4}, + {"label": "k46", "x": 6, "y": 4}, + {"label": "k90", "x": 7, "y": 4}, + {"label": "k91", "x": 8, "y": 4}, + {"label": "k92", "x": 9, "y": 4}, + {"label": "k93", "x": 10, "y": 4}, + {"label": "k94", "x": 11, "y": 4}, + {"label": "k95", "x": 12, "y": 4} + ] + } + } +} diff --git a/keyboards/mechwild/waka60/keymaps/audio/config.h b/keyboards/mechwild/waka60/keymaps/audio/config.h new file mode 100644 index 0000000000..095242a161 --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/audio/config.h @@ -0,0 +1,23 @@ +/* +Copyright 2021 Kyle McCreery + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define AUDIO_PIN B5 +#define AUDIO_PWM_DRIVER PWMD1 +#define AUDIO_PWM_CHANNEL 1 +#define AUDIO_STATE_TIMER GPTD4 diff --git a/keyboards/mechwild/waka60/keymaps/audio/keymap.c b/keyboards/mechwild/waka60/keymaps/audio/keymap.c new file mode 100644 index 0000000000..6f36d75496 --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/audio/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + #include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RGUI, KC_RCTL + ), + [_FN1] = LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, + KC_TRNS, AU_TOG, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, MU_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, MU_MOD, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/mechwild/waka60/keymaps/audio/rules.mk b/keyboards/mechwild/waka60/keymaps/audio/rules.mk new file mode 100644 index 0000000000..59d40ea4dd --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/audio/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +AUDIO_ENABLE = yes +AUDIO_DRIVER = pwm_software
\ No newline at end of file diff --git a/keyboards/mechwild/waka60/keymaps/default/keymap.c b/keyboards/mechwild/waka60/keymaps/default/keymap.c new file mode 100644 index 0000000000..54f2a32a7d --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/default/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + #include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RGUI, KC_RCTL + ), + [_FN1] = LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, + KC_TRNS, KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/mechwild/waka60/keymaps/via/keymap.c b/keyboards/mechwild/waka60/keymaps/via/keymap.c new file mode 100644 index 0000000000..6f36d75496 --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/via/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + #include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RGUI, KC_RCTL + ), + [_FN1] = LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, + KC_TRNS, AU_TOG, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, MU_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, MU_MOD, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/mechwild/waka60/keymaps/via/rules.mk b/keyboards/mechwild/waka60/keymaps/via/rules.mk new file mode 100644 index 0000000000..16d33cd89f --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes + diff --git a/keyboards/mechwild/waka60/readme.md b/keyboards/mechwild/waka60/readme.md new file mode 100644 index 0000000000..7e6d9cefca --- /dev/null +++ b/keyboards/mechwild/waka60/readme.md @@ -0,0 +1,19 @@ +# Waka60 + + + +An affordable Ortholinear keyboard kit featuring a speaker, top-facing RGB LEDs, a center encoder, spacing between the halves, and powered by the STM32 Blackpill. + +* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery) +* Hardware Supported: Waka60 v1.1 +* Hardware Availability: [Waka60 on MechWild](https://mechwild.com/product/waka/) + +Make example for this keyboard (after setting up your build environment): + + make mechwild/waka60:default + +Flashing example for this keyboard: + + make mechwild/waka60:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechwild/waka60/rules.mk b/keyboards/mechwild/waka60/rules.mk new file mode 100644 index 0000000000..5b058057fc --- /dev/null +++ b/keyboards/mechwild/waka60/rules.mk @@ -0,0 +1,17 @@ +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes # Encoder Enabled + +EEPROM_DRIVER = i2c + +DEFAULT_FOLDER = mechwild/waka60/f401 diff --git a/keyboards/mechwild/waka60/waka60.c b/keyboards/mechwild/waka60/waka60.c new file mode 100644 index 0000000000..1b6eec1f44 --- /dev/null +++ b/keyboards/mechwild/waka60/waka60.c @@ -0,0 +1,37 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "waka60.h" +void board_init(void) { + // B9 is configured as I2C1_SDA in the board file; that function must be + // disabled before using B7 as I2C1_SDA. + setPinInputHigh(B9); +} +#ifdef ENCODER_ENABLE +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + switch (index) { + case 0: + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + break; + } + return true; +} +#endif diff --git a/keyboards/mechwild/waka60/waka60.h b/keyboards/mechwild/waka60/waka60.h new file mode 100644 index 0000000000..4e7d82e929 --- /dev/null +++ b/keyboards/mechwild/waka60/waka60.h @@ -0,0 +1,49 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define ___ KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k50, k51, k52, k53, k54, k55, \ + k10, k11, k12, k13, k14, k15, k60, k61, k62, k63, k64, k65, \ + k20, k21, k22, k23, k24, k25, k70, k71, k72, k73, k74, k75, \ + k30, k31, k32, k33, k34, k35, k36, k80, k81, k82, k83, k84, k85, \ + k40, k41, k42, k43, k44, k45, k46, k90, k91, k92, k93, k94, k95 \ +) { \ + { k00, k01, k02, k03, k04, k05, ___}, \ + { k10, k11, k12, k13, k14, k15, ___}, \ + { k20, k21, k22, k23, k24, k25, ___}, \ + { k30, k31, k32, k33, k34, k35, k36}, \ + { k40, k41, k42, k43, k44, k45, k46}, \ + { k50, k51, k52, k53, k54, k55, ___}, \ + { k60, k61, k62, k63, k64, k65, ___}, \ + { k70, k71, k72, k73, k74, k75, ___}, \ + { k80, k81, k82, k83, k84, k85, ___}, \ + { k90, k91, k92, k93, k94, k95, ___} \ +} |