summaryrefslogtreecommitdiff
path: root/keyboards/meira/TWIlib.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/meira/TWIlib.c')
-rwxr-xr-xkeyboards/meira/TWIlib.c300
1 files changed, 0 insertions, 300 deletions
diff --git a/keyboards/meira/TWIlib.c b/keyboards/meira/TWIlib.c
deleted file mode 100755
index 8f5658fcdb..0000000000
--- a/keyboards/meira/TWIlib.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * TWIlib.c
- *
- * Created: 6/01/2014 10:41:33 PM
- * Author: Chris Herring
- */
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include "TWIlib.h"
-#include <util/delay.h>
-#include "print.h"
-
-// Global transmit buffer
-volatile uint8_t *TWITransmitBuffer;
-// Global receive buffer
-volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN];
-// Buffer indexes
-volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time.
-int RXBuffIndex; // Current index in the receive buffer
-// Buffer lengths
-int TXBuffLen; // The total length of the transmit buffer
-int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN)
-
-TWIInfoStruct TWIInfo;
-
-void TWIInit()
-{
- TWIInfo.mode = Ready;
- TWIInfo.errorCode = 0xFF;
- TWIInfo.repStart = 0;
- // Set pre-scalers (no pre-scaling)
- TWSR = 0;
- // Set bit rate
- TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
- // Enable TWI and interrupt
- TWCR = (1 << TWIE) | (1 << TWEN);
-}
-
-uint8_t isTWIReady()
-{
- if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) )
- {
-
-// xprintf("i2c ready\n");
- return 1;
- }
- else
- {
- if(TWIInfo.mode == Initializing){
- switch(TWIInfo.errorCode){
- case TWI_SUCCESS:
- break;
- case TWI_NO_RELEVANT_INFO:
-
- break;
- case TWI_LOST_ARBIT:
- case TWI_MT_DATA_NACK:
- // Some kind of I2C error, reset and re-init
- xprintf("I2C init error: %d\n", TWIInfo.errorCode);
- TWCR = (1 << TWINT)|(1 << TWSTO);
- TWIInit();
- break;
- default:
- xprintf("Other i2c init error: %d\n", TWIInfo.errorCode);
- }
- }
- return 0;
- }
-}
-
-
-void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking)
-{
- // Wait until ready
- while (!isTWIReady()) {_delay_us(1);}
- // Reset the I2C stuff
- TWCR = (1 << TWINT)|(1 << TWSTO);
- TWIInit();
- // Set repeated start mode
- TWIInfo.repStart = repStart;
- // Copy transmit info to global variables
- TWITransmitBuffer = (uint8_t *)TXdata;
- TXBuffLen = dataLen;
- TXBuffIndex = 0;
-
- // If a repeated start has been sent, then devices are already listening for an address
- // and another start does not need to be sent.
- if (TWIInfo.mode == RepeatedStartSent)
- {
- TWIInfo.mode = Initializing;
- TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
- TWISendTransmit(); // Send the data
- }
- else // Otherwise, just send the normal start signal to begin transmission.
- {
- TWIInfo.mode = Initializing;
- TWISendStart();
- }
- if(blocking){
- // Wait until ready
- while (!isTWIReady()){_delay_us(1);}
- }
-}
-
-
-// uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart)
-// {
-// if (dataLen <= TXMAXBUFLEN)
-// {
-// // Wait until ready
-// while (!isTWIReady()) {_delay_us(1);}
-// // Set repeated start mode
-// TWIInfo.repStart = repStart;
-// // Copy data into the transmit buffer
-// uint8_t *data = (uint8_t *)TXdata;
-// for (int i = 0; i < dataLen; i++)
-// {
-// TWITransmitBuffer[i] = data[i];
-// }
-// // Copy transmit info to global variables
-// TXBuffLen = dataLen;
-// TXBuffIndex = 0;
-
-// // If a repeated start has been sent, then devices are already listening for an address
-// // and another start does not need to be sent.
-// if (TWIInfo.mode == RepeatedStartSent)
-// {
-// TWIInfo.mode = Initializing;
-// TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
-// TWISendTransmit(); // Send the data
-// }
-// else // Otherwise, just send the normal start signal to begin transmission.
-// {
-// TWIInfo.mode = Initializing;
-// TWISendStart();
-// }
-
-// }
-// else
-// {
-// return 1; // return an error if data length is longer than buffer
-// }
-// return 0;
-// }
-
-uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart)
-{
- // Check if number of bytes to read can fit in the RXbuffer
- if (bytesToRead < RXMAXBUFLEN)
- {
- // Reset buffer index and set RXBuffLen to the number of bytes to read
- RXBuffIndex = 0;
- RXBuffLen = bytesToRead;
- // Create the one value array for the address to be transmitted
- uint8_t TXdata[1];
- // Shift the address and AND a 1 into the read write bit (set to write mode)
- TXdata[0] = (TWIaddr << 1) | 0x01;
- // Use the TWITransmitData function to initialize the transfer and address the slave
- TWITransmitData(TXdata, 1, repStart, 0);
- }
- else
- {
- return 0;
- }
- return 1;
-}
-
-ISR (TWI_vect)
-{
- switch (TWI_STATUS)
- {
- // ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- //
- case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received
- // Set mode to Master Transmitter
- TWIInfo.mode = MasterTransmitter;
- case TWI_START_SENT: // Start condition has been transmitted
- case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received
- if (TXBuffIndex < TXBuffLen) // If there is more data to send
- {
- TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
- TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
- TWISendTransmit(); // Send the data
- }
- // This transmission is complete however do not release bus yet
- else if (TWIInfo.repStart)
- {
- TWIInfo.errorCode = 0xFF;
- TWISendStart();
- }
- // All transmissions are complete, exit
- else
- {
- TWIInfo.mode = Ready;
- TWIInfo.errorCode = 0xFF;
- TWISendStop();
- }
- break;
-
- // ----\/ ---- MASTER RECEIVER ----\/ ---- //
-
- case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received
- // Switch to Master Receiver mode
- TWIInfo.mode = MasterReceiver;
- // If there is more than one byte to be read, receive data byte and return an ACK
- if (RXBuffIndex < RXBuffLen-1)
- {
- TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
- TWISendACK();
- }
- // Otherwise when a data byte (the only data byte) is received, return NACK
- else
- {
- TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
- TWISendNACK();
- }
- break;
-
- case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted.
-
- /// -- HANDLE DATA BYTE --- ///
- TWIReceiveBuffer[RXBuffIndex++] = TWDR;
- // If there is more than one byte to be read, receive data byte and return an ACK
- if (RXBuffIndex < RXBuffLen-1)
- {
- TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
- TWISendACK();
- }
- // Otherwise when a data byte (the only data byte) is received, return NACK
- else
- {
- TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
- TWISendNACK();
- }
- break;
-
- case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission.
-
- /// -- HANDLE DATA BYTE --- ///
- TWIReceiveBuffer[RXBuffIndex++] = TWDR;
- // This transmission is complete however do not release bus yet
- if (TWIInfo.repStart)
- {
- TWIInfo.errorCode = 0xFF;
- TWISendStart();
- }
- // All transmissions are complete, exit
- else
- {
- TWIInfo.mode = Ready;
- TWIInfo.errorCode = 0xFF;
- TWISendStop();
- }
- break;
-
- // ----\/ ---- MT and MR common ----\/ ---- //
-
- case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received
- case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received
- case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received
- case TWI_LOST_ARBIT: // Arbitration has been lost
- // Return error and send stop and set mode to ready
- if (TWIInfo.repStart)
- {
- TWIInfo.errorCode = TWI_STATUS;
- TWISendStart();
- }
- // All transmissions are complete, exit
- else
- {
- TWIInfo.mode = Ready;
- TWIInfo.errorCode = TWI_STATUS;
- TWISendStop();
- }
- break;
- case TWI_REP_START_SENT: // Repeated start has been transmitted
- // Set the mode but DO NOT clear TWINT as the next data is not yet ready
- TWIInfo.mode = RepeatedStartSent;
- break;
-
- // ----\/ ---- SLAVE RECEIVER ----\/ ---- //
-
- // TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY
-
- // ----\/ ---- SLAVE TRANSMITTER ----\/ ---- //
-
- // TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY
-
- // ----\/ ---- MISCELLANEOUS STATES ----\/ ---- //
- case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition
- // Rather, it is there to be manually set between operations
- break;
- case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error
- TWIInfo.errorCode = TWI_ILLEGAL_START_STOP;
- TWIInfo.mode = Ready;
- TWISendStop();
- break;
- }
-
-}