1 files changed, 82 insertions, 0 deletions
diff --git a/keyboards/omkbd/ergodash/mini/config.h b/keyboards/omkbd/ergodash/mini/config.h
new file mode 100644
index 0000000000..b936e0f54e
--- /dev/null
+++ b/keyboards/omkbd/ergodash/mini/config.h
@@ -0,0 +1,82 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Omkbd
+#define PRODUCT         ErgoDashmini
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+#define DIODE_DIRECTION COL2ROW
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define AUDIO_PIN C6
+
+/* number of backlight levels */
+#ifdef BACKLIGHT_ENABLE
+  #define BACKLIGHT_PIN B6
+  #define BACKLIGHT_LEVELS 7
+//  #define BACKLIGHT_BREATHING
+//  #define BREATHING_PERIOD 4
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 10, 10 }    // Number of LEDs
+
+#define SOFT_SERIAL_PIN D0
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps