diff options
Diffstat (limited to 'keyboards/ryanskidmore')
| -rw-r--r-- | keyboards/ryanskidmore/rskeys100/config.h | 85 | ||||
| -rw-r--r-- | keyboards/ryanskidmore/rskeys100/info.json | 121 | ||||
| -rw-r--r-- | keyboards/ryanskidmore/rskeys100/keymaps/default/keymap.c | 65 | ||||
| -rw-r--r-- | keyboards/ryanskidmore/rskeys100/keymaps/default/readme.md | 1 | ||||
| -rw-r--r-- | keyboards/ryanskidmore/rskeys100/matrix.c | 110 | ||||
| -rw-r--r-- | keyboards/ryanskidmore/rskeys100/readme.md | 22 | ||||
| -rw-r--r-- | keyboards/ryanskidmore/rskeys100/rskeys100.c | 30 | ||||
| -rw-r--r-- | keyboards/ryanskidmore/rskeys100/rskeys100.h | 22 | ||||
| -rw-r--r-- | keyboards/ryanskidmore/rskeys100/rules.mk | 23 |
9 files changed, 479 insertions, 0 deletions
diff --git a/keyboards/ryanskidmore/rskeys100/config.h b/keyboards/ryanskidmore/rskeys100/config.h new file mode 100644 index 0000000000..9e036aa70d --- /dev/null +++ b/keyboards/ryanskidmore/rskeys100/config.h @@ -0,0 +1,85 @@ +// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7273 // rs +#define PRODUCT_ID 0x0064 // 100 +#define DEVICE_VER 0x0001 // rev 1 +#define MANUFACTURER ryanskidmore +#define PRODUCT rsKeys100 + +/* Key Matrix Sizes */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 24 + +/* Rows */ +#define ROW_A D4 +#define ROW_B C6 +#define ROW_C D7 +#define ROW_D E6 +#define ROW_E B4 +#define ROW_F B5 + +/* Columns 0 - 20 (24 with dummy columns for shift registers) */ +#define SHR_LATCH B2 +#define SHR_CLOCK B3 +#define SHR_DATA B1 +#define SHR_COLS { 0x000001, 0x000002, 0x000004, 0x000008, 0x000010, 0x000020, 0x000040, 0x000080, 0x000100, 0x000200, 0x000400, 0x000800, 0x001000, 0x002000, 0x004000, 0x008000, 0x010000, 0x020000, 0x040000, 0x080000, 0x100000, 0x200000, 0x400000, 0x800000 } + +/* The shift registers on the matrix PCB output a signal on each column, which passes through the + * switch and a diode towards the row. The row is then connected to the AVR as an input. This means + * the diode direction is COL(umn) to ROW */ +#define DIODE_DIRECTION COL2ROW + +/* RGB Data Pin */ +#define RGB_DI_PIN C7 +/* The number of RGB LEDs connected */ +#define DRIVER_LED_TOTAL 105 +/* Set the maximum brightness to 110 to avoid going over 500 mA. + * At full brightness with all three indicator LEDs on, the power draw is about 450 mA. */ +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 110 +/* Enable framebuffer effects */ +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +/* Enable the cycle left right animation and set it as the startup mode */ +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Set the max power consumption for the keyboard, which is 500 mA. */ +#define USB_MAX_POWER_CONSUMPTION 500 + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +#define FORCE_NKRO + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION
\ No newline at end of file diff --git a/keyboards/ryanskidmore/rskeys100/info.json b/keyboards/ryanskidmore/rskeys100/info.json new file mode 100644 index 0000000000..ed9898d405 --- /dev/null +++ b/keyboards/ryanskidmore/rskeys100/info.json @@ -0,0 +1,121 @@ +{ + "keyboard_name": "rskeys100", + "url": "", + "maintainer": "ryanskidmore", + "layouts": { + "LAYOUT_fullsize_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.5, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0}, + + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25, "w":2}, + {"x":15.25, "y":1.25}, + {"x":16.25, "y":1.25}, + {"x":17.25, "y":1.25}, + {"x":18.5, "y":1.25}, + {"x":19.5, "y":1.25}, + {"x":20.5, "y":1.25}, + {"x":21.5, "y":1.25}, + + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":15.25, "y":2.25}, + {"x":16.25, "y":2.25}, + {"x":17.25, "y":2.25}, + {"x":18.5, "y":2.25}, + {"x":19.5, "y":2.25}, + {"x":20.5, "y":2.25}, + {"x":21.5, "y":2.25, "h": 2}, + + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25}, + {"x":13.75, "y":2.25, "w":1.25, "h":2}, + {"x":18.5, "y":3.25}, + {"x":19.5, "y":3.25}, + {"x":20.5, "y":3.25}, + + {"x":0, "y":4.25, "w":1.25}, + {"x":1.25, "y":4.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":2.75}, + {"x":16.25, "y":4.25}, + {"x":18.5, "y":4.25}, + {"x":19.5, "y":4.25}, + {"x":20.5, "y":4.25}, + {"x":21.5, "y":4.25, "h":2}, + + {"x":0, "y":5.25, "w":1.25}, + {"x":1.25, "y":5.25, "w":1.25}, + {"x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"x":10, "y":5.25, "w":1.25}, + {"x":11.25, "y":5.25, "w":1.25}, + {"x":12.5, "y":5.25, "w":1.25}, + {"x":13.75, "y":5.25, "w":1.25}, + {"x":15.25, "y":5.25}, + {"x":16.25, "y":5.25}, + {"x":17.25, "y":5.25}, + {"x":18.5, "y":5.25, "w":2}, + {"x":20.5, "y":5.25} + ] + } + } +} diff --git a/keyboards/ryanskidmore/rskeys100/keymaps/default/keymap.c b/keyboards/ryanskidmore/rskeys100/keymaps/default/keymap.c new file mode 100644 index 0000000000..37f2589760 --- /dev/null +++ b/keyboards/ryanskidmore/rskeys100/keymaps/default/keymap.c @@ -0,0 +1,65 @@ +// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Scr│Pse│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ │Num│ / │ * │ - │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ │ │Del│End│PgD│ │ 7 │ 8 │ 9 │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent│ └───┴───┴───┘ ├───┼───┼───┤ + │ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ │ │ 4 │ 5 │ 6 │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ ├───┼───┼───┼───┤ + * │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│ + * │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ + */ + /* Default Layer */ + [0] = LAYOUT_fullsize_iso( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, LT(1, KC_F12), KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), + /* RGB Control Layer */ + [1] = LAYOUT_fullsize_iso( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, _______, _______, _______ + ), +}; + +void keyboard_post_init_user(void) { + rgb_matrix_enable_noeeprom(); +} + +void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { + /* We use RGB for the indicator RGB colours since we don't need to adjust the brightness. + * If any of the indicators are enabled, set the key to white. This overrides the active RGB + * matrix animation. */ + + if (host_keyboard_led_state().caps_lock) { + RGB_MATRIX_INDICATOR_SET_COLOR(73, 255, 255, 255); + } + + if (host_keyboard_led_state().num_lock) { + RGB_MATRIX_INDICATOR_SET_COLOR(19, 255, 255, 255); + } + + if (host_keyboard_led_state().scroll_lock) { + RGB_MATRIX_INDICATOR_SET_COLOR(14, 255, 255, 255); + } +}
\ No newline at end of file diff --git a/keyboards/ryanskidmore/rskeys100/keymaps/default/readme.md b/keyboards/ryanskidmore/rskeys100/keymaps/default/readme.md new file mode 100644 index 0000000000..03357c206b --- /dev/null +++ b/keyboards/ryanskidmore/rskeys100/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap (UK, ISO) for the rskeys100. The RGB control layer can be activated by holding the F12 key.
\ No newline at end of file diff --git a/keyboards/ryanskidmore/rskeys100/matrix.c b/keyboards/ryanskidmore/rskeys100/matrix.c new file mode 100644 index 0000000000..faefb29c84 --- /dev/null +++ b/keyboards/ryanskidmore/rskeys100/matrix.c @@ -0,0 +1,110 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> +Modified by Ryan Skidmore <rskeys@ryanskidmore.co.uk> (@ryanskidmore) +to support the rskeys100. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdbool.h> +#include "matrix.h" +#include <util/delay.h> +#include "quantum.h" + +static const uint32_t col_values[24] = SHR_COLS; + +static uint8_t read_rows(void); +static void select_col(uint8_t col); + +static void shift_pulse(void); +static void shift_out_single(uint8_t value); +static void shift_out(uint32_t value); + +void matrix_init_custom(void) { + setPinInput(ROW_A); + setPinInput(ROW_B); + setPinInput(ROW_C); + setPinInput(ROW_D); + setPinInput(ROW_E); + setPinInput(ROW_F); + + setPinOutput(SHR_DATA); + setPinOutput(SHR_LATCH); + setPinOutput(SHR_CLOCK); +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool changed = false; + + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + select_col(col); + _delay_us(1); + uint8_t rows = read_rows(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + bool prev_bit = ((uint32_t)(current_matrix[row]) & (matrix_row_t)(1UL << col)) ? 1 : 0; + bool curr_bit = ((uint32_t)rows & (uint32_t)(1UL << row)) ? 1 : 0; + if (prev_bit != curr_bit) { + current_matrix[row] = (uint32_t)(current_matrix[row]) ^ (uint32_t)(1UL << col); + changed = true; + } + } + } + + return changed; +} + +static uint8_t read_rows(void) { + return (readPin(ROW_F) << 5) + | (readPin(ROW_E) << 4) + | (readPin(ROW_D) << 3) + | (readPin(ROW_C) << 2) + | (readPin(ROW_B) << 1) + | (readPin(ROW_A) ); +} + +static void select_col(uint8_t col) { + shift_out(col_values[col]); +} + +static void shift_out(uint32_t value) { + writePinLow(SHR_LATCH); + uint8_t first_byte = (value >> 16) & 0xFF; + uint8_t second_byte = (value >> 8) & 0xFF; + uint8_t third_byte = (uint8_t)(value & 0xFF); + + shift_out_single(first_byte); + shift_out_single(second_byte); + shift_out_single(third_byte); + writePinHigh(SHR_LATCH); + /* We delay here to prevent multiple consecutive keys being triggered with a single switch press */ + _delay_us(10); +} + +static void shift_out_single(uint8_t value) { + for (uint8_t i = 0; i < 8; i++) { + if (value & 0b10000000) { + writePinHigh(SHR_DATA); + } else { + writePinLow(SHR_DATA); + } + + shift_pulse(); + value = value << 1; + } +} + +static inline void shift_pulse(void) { + writePinHigh(SHR_CLOCK); + writePinLow(SHR_CLOCK); +}
\ No newline at end of file diff --git a/keyboards/ryanskidmore/rskeys100/readme.md b/keyboards/ryanskidmore/rskeys100/readme.md new file mode 100644 index 0000000000..4be465dbde --- /dev/null +++ b/keyboards/ryanskidmore/rskeys100/readme.md @@ -0,0 +1,22 @@ +# rskeys100 + +The rskeys100 is a full size, 100% ISO keyboard with per-key RGB. + +* Keyboard Maintainer: [Ryan Skidmore](https://github.com/ryanskidmore) +* Hardware Supported: The rskeys100 matrix PCB is the only supported PCB for the switch matrix. This PCB works with any +Pro Micro or Pro Micro alternative as the daughterboard. +* Hardware Availability: Coming soon + +Make example for this keyboard (after setting up your build environment): + + make ryanskidmore/rskeys100:default + +Flashing example for this keyboard: + + make ryanskidmore/rskeys100:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +To enter the bootloader, press the `RESET` button on your daughterboard PCB while it's plugged in.
\ No newline at end of file diff --git a/keyboards/ryanskidmore/rskeys100/rskeys100.c b/keyboards/ryanskidmore/rskeys100/rskeys100.c new file mode 100644 index 0000000000..ec98ae62cc --- /dev/null +++ b/keyboards/ryanskidmore/rskeys100/rskeys100.c @@ -0,0 +1,30 @@ +// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rskeys100.h" + + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,NO_LED, 14, 15, 16,NO_LED,NO_LED,NO_LED,NO_LED}, + { 37, 36, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 24, 24, 23, 22, 21, 20, 19, 18, 17}, + { 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60}, + { 78, 77, 76, 75, 74, 73, 72, 71, 70, 69, 68, 67, 66,NO_LED,NO_LED,NO_LED,NO_LED, 64, 63, 62,NO_LED}, + { 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91,NO_LED,NO_LED, 93,NO_LED, 94, 95, 96, 97}, + { 117,NO_LED, 116, 115,NO_LED,NO_LED, 112,NO_LED,NO_LED,NO_LED, 109, 108, 107, 106, 105, 103, 102, 101,NO_LED, 99,NO_LED} + }, { + {0, 0}, {21, 0}, {32, 0}, {43, 0}, {53, 0}, {64, 0}, {75, 0}, {85, 0}, {96, 0}, {117, 0}, {128, 0}, {139, 0}, {149, 0}, {160, 0}, {171, 0}, {181, 0}, + {0, 13}, {11, 13}, {21, 13}, {32, 13}, {42, 13}, {53, 13}, {64, 13}, {75, 13}, {85, 13}, {96, 13}, {107, 13}, {117, 13}, {128, 13}, {139, 13}, {160, 13}, {171, 13}, {181, 13}, {192, 13}, {203, 13}, {213, 13}, {224, 13}, + {0, 26}, {11, 26}, {21, 26}, {32, 26}, {42, 26}, {53, 26}, {64, 26}, {75, 26}, {85, 26}, {96, 26}, {107, 26}, {117, 26}, {128, 26}, {149, 26}, {160, 26}, {171, 26}, {181, 26}, {192, 26}, {203, 26}, {213, 26}, {224, 26}, + {0, 38}, {11, 38}, {21, 38}, {32, 38}, {42, 38}, {53, 38}, {64, 38}, {75, 38}, {85, 38}, {96, 38}, {117, 38}, {128, 38}, {149, 38}, {192, 38}, {203, 38}, {213, 38}, + {0, 51}, {11, 51}, {21, 51}, {32, 51}, {42, 51}, {53, 51}, {64, 51}, {75, 51}, {85, 51}, {96, 51}, {107, 51}, {117, 51}, {139, 51}, {171, 51}, {192, 51}, {203, 51}, {213, 51}, {224, 51}, + {0, 64}, {11, 64}, {21, 64}, {64, 64}, {107, 64}, {117, 64}, {128, 64}, {149, 64}, {160, 64}, {171, 64}, {181, 64}, {192, 64}, {213, 64} + }, { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 + } }; +#endif
\ No newline at end of file diff --git a/keyboards/ryanskidmore/rskeys100/rskeys100.h b/keyboards/ryanskidmore/rskeys100/rskeys100.h new file mode 100644 index 0000000000..d297440065 --- /dev/null +++ b/keyboards/ryanskidmore/rskeys100/rskeys100.h @@ -0,0 +1,22 @@ +// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "quantum.h" + +#define LAYOUT_fullsize_iso( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K317, K318, K319, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K415, K417, K418, K419, K420, \ + K500, K502, K503, K506, K510, K511, K512, K513, K514, K515, K516, K517, K519 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014, K015, K016, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, KC_NO, KC_NO, KC_NO }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, KC_NO, KC_NO, KC_NO }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO, KC_NO, KC_NO, KC_NO, K317, K318, K319, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, KC_NO, K415, KC_NO, K417, K418, K419, K420, KC_NO, KC_NO, KC_NO }, \ + { K500, KC_NO, K502, K503, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514, K515, K516, K517, KC_NO, K519, KC_NO, KC_NO, KC_NO, KC_NO } \ +} diff --git a/keyboards/ryanskidmore/rskeys100/rules.mk b/keyboards/ryanskidmore/rskeys100/rules.mk new file mode 100644 index 0000000000..62e3f42784 --- /dev/null +++ b/keyboards/ryanskidmore/rskeys100/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite + +SRC += matrix.c
\ No newline at end of file |