diff options
Diffstat (limited to 'keyboards/satan')
49 files changed, 2370 insertions, 0 deletions
diff --git a/keyboards/satan/Makefile b/keyboards/satan/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/satan/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/satan/config.h b/keyboards/satan/config.h new file mode 100644 index 0000000000..eb357b39e0 --- /dev/null +++ b/keyboards/satan/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER SATAN +#define PRODUCT GH60 +#define DESCRIPTION QMK keyboard firmware for Satan GH60 with WS2812 support + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration + */ + +#define RGB_DI_PIN E2 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/satan/controller.jpg b/keyboards/satan/controller.jpg Binary files differnew file mode 100644 index 0000000000..76ffa45004 --- /dev/null +++ b/keyboards/satan/controller.jpg diff --git a/keyboards/satan/keymaps/admiralStrokers/Makefile b/keyboards/satan/keymaps/admiralStrokers/Makefile new file mode 100644 index 0000000000..61dfedeb84 --- /dev/null +++ b/keyboards/satan/keymaps/admiralStrokers/Makefile @@ -0,0 +1,24 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Enables your LED to breathe while your computer is sleeping. +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODEMAP_ENABLE = no # This allows sending unicode symbols using X(<unicode>) in your keymap. +UNICODE_ENABLE =no # Unicode +UCIS_ENABLE = no # Keep in mind that not all will work (See WinCompose for details on Windows). +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no# Breathing sleep LED during USB suspend +API_SYSEX_ENABLE = no # This enables using the Quantum SYSEX API to send strings +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/admiralStrokers/config.h b/keyboards/satan/keymaps/admiralStrokers/config.h new file mode 100644 index 0000000000..d0338fb7e9 --- /dev/null +++ b/keyboards/satan/keymaps/admiralStrokers/config.h @@ -0,0 +1,96 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H_ADMSTROK +#define CONFIG_H_ADMSTROK + +#include "config_common.h" +#include "../../config.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER SATAN +#define PRODUCT GH60 +#define DESCRIPTION QMK keyboard firmware for Satan GH60 with WS2812 support + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration */ +#define RGB_DI_PIN E2 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#define DISABLE_SPACE_CADET_ROLLOVER + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/satan/keymaps/admiralStrokers/keymap.c b/keyboards/satan/keymaps/admiralStrokers/keymap.c new file mode 100644 index 0000000000..b6dc29c673 --- /dev/null +++ b/keyboards/satan/keymaps/admiralStrokers/keymap.c @@ -0,0 +1,195 @@ +#include "satan.h" + +static uint16_t key_timer; + +bool checktime(void){ + return (timer_elapsed(key_timer) < 150) ? true : false; + }; + +// general keydefs +#define norm 0 // Default layer +#define elev 1 // Layer directional keys +#define supr 2 // F-keys and mediakeys +#define spac 3 // +#define FNO1 4 // +#define FNO2 5 // +#define FNO3 6 // +#define MAC0 M(0) // +#define MAC1 M(1) // +#define MAC2 M(2) // +#define MAC3 M(3) // +#define MAC4 M(4) // +#define MAC5 M(5) // +#define MAC6 M(6) // +#define MAC7 M(7) // +#define MAC8 M(8) // +#define MAC9 M(9) // +#define GRAV KC_GRV // +#define MEDI F(FNO1)// + +// General shortenings +#define ESCA KC_ESC +#define MINS KC_MINS +#define EQUL KC_EQL +#define BSPC KC_BSPC +#define DELE KC_DEL +#define LBRC KC_LBRC +#define RBRC KC_RBRC +#define ALTR KC_RALT +#define SCLN KC_SCLN +#define QUOT KC_QUOT +#define NUHS KC_NUHS +#define ENTE KC_ENT +#define NUBS KC_NUBS // Less/ greater sign +#define COMM KC_COMM // Comma +#define FSTO KC_DOT // Full stop +#define SLSH KC_SLSH +#define ALTL KC_LALT +#define GUIL KC_LGUI +#define GUIR KC_RGUI +#define MENO KC_MENU +// The F-row/layer: +#define FK01 KC_F1 +#define FK02 KC_F2 +#define FK03 KC_F3 +#define FK04 KC_F4 +#define FK05 KC_F5 +#define FK06 KC_F6 +#define FK07 KC_F7 +#define FK08 KC_F8 +#define FK09 KC_F9 +#define FK10 KC_F10 +#define FK11 KC_F11 +#define FK12 KC_F12 +#define FK13 KC_F13 +#define FK14 KC_F14 +// Special Actions and Media Keys +#define INSE KC_INS // Insert here +#define HOME KC_HOME // Go to beginning of line +#define ENDI KC_END // go to end of line +#define PSCR KC_PSCR // Print Screen +#define SLCK KC_SLCK // go to end of line +#define PGDN KC_PGDN // go to end of line +#define PGUP KC_PGUP // go to end of line +#define PLPS KC_MPLY // Play/Pause +#define PAUS KC_PAUS // Pause button +#define MUTE KC_MUTE // Mute sound +#define VOLU KC_VOLU // Volume increase +#define VOLD KC_VOLD // Volume decrease +#define MNXT KC_MNXT // next track +#define MPRV KC_MPRV // prev track +#define MSTP KC_MSTP // stop playing +#define MSEL KC_MSEL // Select media (Start playing it) +#define MAIL KC_MAIL // Open default mail app +#define CALC KC_CALC // Open default calculator app +#define MYCM KC_MYCM // Open default file manager +//#define LILO KC_XXXXXX // Reserved for later +//#define LIHI KC_XXXXXX // Reserved for later + + +// dual-role shortcuts +#define DUTB LT(elev, KC_TAB) // `tabs` layer on hold and tab on tap +#define DUSP LT(spac, KC_SPACE) // `spce` layer on hold and space on tap +#define LOCK LGUI(KC_L) // lock computer (win) + +// Space Admiral Strokers +#define SADL MAC0 // Hold for lshift and { on tap +#define SADR MAC1 // Hold for rshift and } on tap +#define CADL MAC2 // Hold for lctrl and [ on tap +#define CADR MAC3 // Hold for rctrl and ] on tap + +// arrow cluster duality bottom right corner +#define ARLF ALT_T(KC_LEFT) // Left arrow +#define ARRT CTL_T(KC_RIGHT)// Right arrow +#define ARUP SFT_T(KC_UP) // Up arrow +#define ARDN GUI_T(KC_DOWN) // Down arrow + +// brackets +#define NOCL RALT(KC_7) // [ +#define NOCR RALT(KC_0) // ] +#define NOPL LSFT(KC_8) // ( +#define NOPR LSFT(KC_9) // ) +#define NOAL KC_NUBS // < +#define NOAR LSFT(KC_NUBS) // > +#define NOBL RALT(KC_8) // [ +#define NOBR RALT(KC_9) // ] + +// increase readability +#define XXXX KC_TRNS +#define DEAD KC_NO +#define SCAN KC_TRNS // Scandinavian keys, the Row 5 key 5 is actually Row 1 key 15 on the PCB + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[ norm ] = KEYMAP( // Normal scandinavian mapping (danish has QUOT and SCLN wapped) + GRAV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, MINS, EQUL, BSPC, DELE,\ + DUTB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, LBRC, RBRC, DEAD,\ + ALTR, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, SCLN, QUOT, NUHS, ENTE,\ + SADL, NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, COMM, FSTO, SLSH, SADR, DEAD,\ + CADL, ALTL, GUIL, DUSP, GUIR, MEDI, MENO, CADR), + +[ elev ] = KEYMAP( // The f-Row (with f13-14), Special keys and media keys + LOCK, FK01, FK02, FK03, FK04, FK05, FK06, FK07, FK08, FK09, FK10, FK11, FK12, FK13, FK14,\ + XXXX, XXXX, XXXX, XXXX, MAIL, XXXX, XXXX, HOME, INSE, PSCR, SLCK, PAUS, PGUP, XXXX,\ + XXXX, XXXX, XXXX, XXXX, MYCM, XXXX, XXXX, MPRV, PAUS, MNXT, XXXX, XXXX, PGDN, ENDI,\ + XXXX, XXXX, XXXX, XXXX, CALC, XXXX, XXXX, XXXX, MUTE, VOLD, VOLU, XXXX, ARUP, DEAD,\ + XXXX, XXXX, XXXX, PLPS, XXXX, ARLF, ARDN, ARRT), + +[ spac ] = KEYMAP( // The space controls (by pressing space) + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, DEAD,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX), + +[ supr ] = KEYMAP( // Additional layer for later use. + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, DEAD,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { // MACRODOWN only works in this function + switch(id) { + case 0: //MAC0 - Hold for lshift and { on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(LSFT), END ); + } else { + return checktime() ? MACRO(U(LSFT),D(RALT),T(7),U(RALT),END): MACRO(U(LSFT),END); + }; break; + case 1: //MAC1 - Hold for rshift and } on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(RSFT), END ); + } else { + return checktime() ? MACRO(U(RSFT),D(RALT),T(0),U(RALT),END): MACRO(U(RSFT),END); + }; break; + case 2: //MAC2 - Hold for lctrl and [ on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(LCTL), END ); + } else {return checktime() ? MACRO(U(LCTL),D(RALT),T(8),U(RALT),END):MACRO(U(LCTL),END); + }; break; + case 3: //MAC3 - Hold for rctrl and ] on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(RCTL), END ); + } else { + return checktime() ? MACRO(U(RCTL),D(RALT),T(9),U(RALT),END):MACRO(U(RCTL),END); + }; break; + case 4: //MAC4 reserved for later. + if (record->event.pressed) { } else { }; break; + case 5: //MAC5 reserved for later. + if (record->event.pressed) { } else { }; break; + case 6: //MAC6 reserved for later. + if (record->event.pressed) { } else { }; break; + } return MACRO_NONE; +}; +/* + Later use: + void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { } + enum function_id { }; + const uint16_t PROGMEM fn_actions[] = { }; + +*/ diff --git a/keyboards/satan/keymaps/admiralStrokers/readme.md b/keyboards/satan/keymaps/admiralStrokers/readme.md new file mode 100644 index 0000000000..9b30caf349 --- /dev/null +++ b/keyboards/satan/keymaps/admiralStrokers/readme.md @@ -0,0 +1,13 @@ +# Admiral Strokers keymap +## For the Satan GH60 PCB +The Admiral STN60 is a layout for users of the satan GH60, optimized with some nice features such as mod tap for brackets (Similar to Space Cadett), space mod for F-row/ layer with easy to access media and control keys. The layout below is just as an example and is ISO based, ANSI and JIS layouts will be included later. + +`````` +[ _tmp ] = KEYMAP( // Copy this to get started. SCAN is scandinavian layout specific. +XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ +XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, DEAD,\ +XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, SCAN, XXXX,\ +XXXX, SCAN, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, DEAD,\ +XXXX, XXXX, XXXX, XXXX, SCAN, XXXX, XXXX, XXXX, XXXX),\ + +``` diff --git a/keyboards/satan/keymaps/colemak/Makefile b/keyboards/satan/keymaps/colemak/Makefile new file mode 100644 index 0000000000..2a7ff27793 --- /dev/null +++ b/keyboards/satan/keymaps/colemak/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/colemak/keymap.c b/keyboards/satan/keymaps/colemak/keymap.c new file mode 100644 index 0000000000..ffb0d10c02 --- /dev/null +++ b/keyboards/satan/keymaps/colemak/keymap.c @@ -0,0 +1,98 @@ +#include "satan.h" + + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC,KC_BSLS, \ + KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, MO(_FL), KC_LGUI, KC_SPC, KC_RALT,KC_RGUI, MO(_FL),KC_RCTL), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |--------------------------------------------ΩΩ---------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP_ANSI( + #ifdef RGBLIGHT_ENABLE + KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______, _______), + #else + KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ + _______,KC_MPRV,KC_MPLY,KC_MNXT,_______,_______,_______,KC_HOME,KC_PGDN,KC_PGUP, KC_END, BL_DEC, BL_INC,BL_TOGG, \ + KC_DEL, KC_VOLD,KC_MUTE,KC_VOLU,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP, KC_RGHT,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/keymaps/colemak/readme.md b/keyboards/satan/keymaps/colemak/readme.md new file mode 100644 index 0000000000..59bd4d1244 --- /dev/null +++ b/keyboards/satan/keymaps/colemak/readme.md @@ -0,0 +1 @@ +# Colemak layout for GH60 Satan diff --git a/keyboards/satan/keymaps/dbroqua/keymap.c b/keyboards/satan/keymaps/dbroqua/keymap.c new file mode 100644 index 0000000000..5b921e0210 --- /dev/null +++ b/keyboards/satan/keymaps/dbroqua/keymap.c @@ -0,0 +1,152 @@ +#include "satan.h" +#include "action_layer.h" +#include "rgblight.h" + +#define _DEFAULT 0 +#define _FN 1 +#define _SFX 2 + +enum planck_keycodes { + DEFAULT = SAFE_RANGE +}; + +// Fillers to make layering more clear +#define ______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty gui/alt/space/alt/gui + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | + * |-----------------------------------------------------------------------------------------+ + * |LGUI | LAlt | Space | RAlt |RGUI | + * `-----------------------------------------------------------------' + */ + [_DEFAULT] = KEYMAP_HHKB( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \ + ______, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, ______, ______ \ + ), + +/* FN Layer + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------+ + * | CAPS | BL- | BL+ | BL | | | | | Psc | Slck| Paus| Up | | | + * |-----------------------------------------------------------------------------------------+ + * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | + * |-----------------------------------------------------------------------------------------+ + * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | + * |-----------------------------------------------------------------------------------------+ + * | | | | Stop | | + * `-----------------------------------------------------------------' + */ + [_FN] = KEYMAP_HHKB( /* Layer 1 */ + TG(_SFX), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ + ______, KC_VOLD,KC_VOLU,KC_MUTE,______, ______, KC_PAST,KC_PSLS,KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, ______, \ + ______, KC_MPRV,KC_MPLY,KC_MNXT,______, ______, KC_PPLS,KC_PMNS,KC_END, KC_PGDN, KC_DOWN, ______, ______, \ + ______, ______, ______, ______, KC_MSTP, ______, ______, ______ \ + ), + +/* SFX Layer + * ,-----------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | BL- | BL+ | BL | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | RGBT| RGBM| | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | Hue+| Hue-| Sat+| Sat-| Val+| Val-| | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | + * `-----------------------------------------------------------------' + */ + [_SFX] = KEYMAP_HHKB( + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, BL_DEC, BL_INC, BL_TOGG,______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, F(0), F(1), ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, F(2), F(3), F(4), F(5), F(6), F(7), ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______ \ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; + +enum function_id { + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(RGBLED_TOGGLE), + [1] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL) +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + } +}
\ No newline at end of file diff --git a/keyboards/satan/keymaps/dbroqua/readme.md b/keyboards/satan/keymaps/dbroqua/readme.md new file mode 100644 index 0000000000..39e71beedd --- /dev/null +++ b/keyboards/satan/keymaps/dbroqua/readme.md @@ -0,0 +1,9 @@ +# Dbroqua HHKB like Layout + +Like the HHKB but with a Satan GH60 PCB :D. + +# Programming Instructions: +Enter into programming mode and run the following command. +``` +$ sudo KEYMAP=dbroqua_hhkb make dfu +```
\ No newline at end of file diff --git a/keyboards/satan/keymaps/default/Makefile b/keyboards/satan/keymaps/default/Makefile new file mode 100644 index 0000000000..2a7ff27793 --- /dev/null +++ b/keyboards/satan/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/default/keymap.c b/keyboards/satan/keymaps/default/keymap.c new file mode 100644 index 0000000000..2bf49d2e65 --- /dev/null +++ b/keyboards/satan/keymaps/default/keymap.c @@ -0,0 +1,98 @@ +#include "satan.h" + + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(_FL),KC_RCTL), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP_ANSI( + #ifdef RGBLIGHT_ENABLE + KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______, _______), + #else + KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/keymaps/default/readme.md b/keyboards/satan/keymaps/default/readme.md new file mode 100644 index 0000000000..c366147df3 --- /dev/null +++ b/keyboards/satan/keymaps/default/readme.md @@ -0,0 +1 @@ +# default Satan GH60 layout diff --git a/keyboards/satan/keymaps/denolfe/Makefile b/keyboards/satan/keymaps/denolfe/Makefile new file mode 100644 index 0000000000..c4adab737c --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/Makefile @@ -0,0 +1,20 @@ + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/denolfe/README.md b/keyboards/satan/keymaps/denolfe/README.md new file mode 100644 index 0000000000..30b94fcdd2 --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/README.md @@ -0,0 +1,12 @@ +# denolfe's Layout +Customized Satan keymap + + + +## Programming Instructions: +`cd` into keymap directory, `make dfu` + +## Features +- Movement keys with <kbd>CapsLock</kbd> + <kbd>h</kbd>, <kbd>j</kbd>, <kbd>k</kbd>, <kbd>l</kbd> +- Media Keys +- Backlight control diff --git a/keyboards/satan/keymaps/denolfe/keyboard-layout.png b/keyboards/satan/keymaps/denolfe/keyboard-layout.png Binary files differnew file mode 100644 index 0000000000..d6d6ad57fb --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/keyboard-layout.png diff --git a/keyboards/satan/keymaps/denolfe/keymap.c b/keyboards/satan/keymaps/denolfe/keymap.c new file mode 100644 index 0000000000..5f189d78a3 --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/keymap.c @@ -0,0 +1,171 @@ +#include "satan.h" + +#ifdef RGBLIGHT_ENABLE +#include "rgblight.h" +#endif + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _SL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_RGUI, KC_RCTL), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP_ANSI( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #else + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_PGUP, KC_TRNS, KC_END, KC_MPRV, KC_MNXT, KC_MPLY, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, KC_HOME, LCTL(KC_LEFT), LCTL(KC_END), LCTL(KC_RIGHT), KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, F(9), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #endif + +[_SL] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_PGUP, KC_TRNS, LSFT(KC_END), KC_MPRV, KC_MNXT, KC_MPLY, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LSFT(KC_LEFT), LSFT(KC_DOWN), LSFT(KC_UP), LSFT(KC_RIGHT), KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, LSFT(KC_HOME), LCTL(LSFT(KC_LEFT)), LCTL(LSFT(KC_END)), LCTL(LSFT(KC_RIGHT)), KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; + +enum function_id { + SHIFT_ESC, + #ifdef RGBLIGHT_ENABLE + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL + #endif +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), + #ifdef RGBLIGHT_ENABLE + [1] = ACTION_FUNCTION(RGBLED_TOGGLE), + [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + #endif + [9] = ACTION_LAYER_MODS(2, MOD_LSFT) +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + //led operations + #ifdef RGBLIGHT_ENABLE + case RGBLED_TOGGLE: + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + #endif + } +} diff --git a/keyboards/satan/keymaps/iso_split_rshift/.gitignore b/keyboards/satan/keymaps/iso_split_rshift/.gitignore new file mode 100644 index 0000000000..4d652661c6 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/.gitignore @@ -0,0 +1,3 @@ +updatemerge.sh +clear_flash.hex +resetboard.sh diff --git a/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg b/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg Binary files differnew file mode 100644 index 0000000000..7616693f9d --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile new file mode 100644 index 0000000000..d1e07da3fc --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile @@ -0,0 +1,16 @@ +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh new file mode 100755 index 0000000000..6b4b4568f5 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh @@ -0,0 +1,42 @@ +#!/bin/bash +# adjust for cpu +# -j 16 gave best result on a hyperthreaded quad core core i7 + +LIMIT=10 +THREADS="-j 16" +KMAP=iso_split_rshift + +echo "We need sudo later" +sudo ls 2>&1 /dev/null + +function wait_bootloader { + echo "Waiting for Bootloader..." + local STARTTIME=$(date +"%s") + local REMIND=0 + local EXEC=dfu-programmer + local TARGET=atmega32u4 + while true + do + sudo $EXEC $TARGET get > /dev/null 2>&1 + [ $? -eq 0 ] && break + ENDTIME=$(date +"%s") + DURATION=$(($ENDTIME-$STARTTIME)) + if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] + then + echo "Did you forget to press the reset button?" + REMIND=1 + fi + sleep 1 + done +} +make clean +make KEYMAP=${KMAP} ${THREADS} +if [[ $? -eq 0 ]] +then + echo "please trigger flashing!" + wait_bootloader + sudo make KEYMAP=${KMAP} dfu ${THREADS} +else + echo "make failed" + exit 77 +fi diff --git a/keyboards/satan/keymaps/iso_split_rshift/config.h b/keyboards/satan/keymaps/iso_split_rshift/config.h new file mode 100644 index 0000000000..27c1372da1 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/config.h @@ -0,0 +1,27 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// only change +#undef RGB_DI_PIN +#define RGB_DI_PIN B2 + +#endif diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c new file mode 100644 index 0000000000..cf938e07d5 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -0,0 +1,209 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "satan.h" +// TODO: replace your ugly german brckets with #defines + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DEF 0 +#define _SPC 1 +#define _TAB 2 +#define _SFX 3 + +// dual-role shortcuts +#define TABDUAL LT(_TAB, KC_TAB) +#define CAPSDUAL CTL_T(KC_ESC) +#define SPACEDUAL LT(_SPC, KC_SPACE) +#define ENTERDUAL CTL_T(KC_ENT) +// arrow cluster duality bottom right corner +#define ARRLEFT ALT_T(KC_LEFT) +#define ARRDOWN GUI_T(KC_DOWN) +#define ARRUP SFT_T(KC_UP) +#define ARRRIGHT CTL_T(KC_RIGHT) +// german brackets +#define GER_CUR_L RALT(KC_7) // [ +#define GER_CUR_R RALT(KC_0) // ] +#define GER_PAR_L LSFT(KC_8) // ( +#define GER_PAR_R LSFT(KC_9) // ) +#define GER_ANG_L KC_NUBS // < +#define GER_ANG_R LSFT(KC_NUBS) // > +#define GER_BRC_L RALT(KC_8) // [ +#define GER_BRC_R RALT(KC_9) // ] + +// increase readability +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _DEF: Default Layer + * ,-----------------------------------------------------------. + * |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 + * |-----------------------------------------------------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | + * |-----------------------------------------------------------| + * |Sft | < | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP + * |-----------------------------------------------------------| + * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is + * `-----------------------------------------------------------' LEFT DWN RIGHT + */ + [_DEF] = KEYMAP_ISO_SPLITRSHIFT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + TABDUAL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + CAPSDUAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, ENTERDUAL, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, ARRUP, TG(_SFX), \ + KC_LCTL, KC_LGUI, KC_LALT, SPACEDUAL, KC_RALT, ARRLEFT, ARRDOWN, ARRRIGHT), + + /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) + * ,-----------------------------------------------------------. + * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete| + * |-----------------------------------------------------------| + * | |Paus| Up| [ | ] | | | | ( | ) | | | | | + * |-----------------------------------------------------------| + * | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY | + * |-----------------------------------------------------------| + * | | | | | < | > | |M0 | | | | | Vol+ | | + * |-----------------------------------------------------------| + * | | | | |Alt |Prev|Vol-|Next| + * `-----------------------------------------------------------' + */ + [_SPC] = KEYMAP_ISO_SPLITRSHIFT( + KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, KC_PAUS, KC_UP, GER_BRC_L, GER_BRC_R, _______, _______, GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \ + _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \ + _______, _______, _______, _______, GER_ANG_L, GER_ANG_R, KC_SPACE, M(0), _______, _______, _______, _______, KC_VOLU, _______, \ + _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), + + /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) + * ,-----------------------------------------------------------. + * |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE + * |-----------------------------------------------------------| + * | | | | | | | | | { | } | | | | | + * |-----------------------------------------------------------| + * | | | | | | |Pos1|PgDn|PgUp|End| | |Retrn | + * |-----------------------------------------------------------| + * | | | | | | | |AF2| | | | | PgUp | | + * |-----------------------------------------------------------| + * | | | | |Alt |Pos1|PgDn|End | + * `-----------------------------------------------------------' + */ + [_TAB] = KEYMAP_ISO_SPLITRSHIFT( + KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \ + _______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), + + /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) + * ,-----------------------------------------------------------. + * |RSET| | | | | | | 7| 8| 9| | | |Backsp | + * |-----------------------------------------------------------| + * | | | | | | | | 4 | 5 | 6 | | | | \ | + * |-----------------------------------------------------------| + * | | L | L | | | | | 1 | 2 | 3 | | | Return | + * |-----------------------------------------------------------| + * | | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent + * |-----------------------------------------------------------| LED controlling + * |Ctrl|Win |Alt | |Alt |Left|Down|Right| + * `-----------------------------------------------------------' + */ + [_SFX] = KEYMAP_ISO_SPLITRSHIFT( + RESET, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, KC_BSPC, \ + _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, KC_BSLS, \ + _______, F(2), F(3), _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, XXXXXXX, KC_ENT, \ + _______, F(4), F(5), F(6), F(7), F(8), F(9), _______, _______, KC_0, _______, KC_SLSH, KC_UP, _______, \ + _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT), +}; + +enum function_id { + LAUNCH, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_FUNCTION(LAUNCH), + [2] = ACTION_FUNCTION(RGBLED_TOGGLE), + [3] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [4] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [5] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [6] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [8] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [9] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + return (record->event.pressed ? + MACRO( D(RALT), T(SPC), U(RALT), END ) + :MACRO( END )); + break; + case 1: + return (record->event.pressed ? + MACRO( D(LALT), T(F2), U(LALT), END ) + :MACRO( END )); + break; + } + return MACRO_NONE; +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + } +} diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md new file mode 100644 index 0000000000..ec6123d8a7 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -0,0 +1,36 @@ +toneman77's Satan Layout +===================== + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +* heavily modified ISO (!) layout with split right shift key +* spaceFn +* Dual-Role keys: +* + | Original key | when tapped | when held | + | ---------------- | ------------- | ------------- | + | Space | Space | layer change | + | Caps lock | Escape | Control | + | Tab | Tab | layer change | + | Enter | Enter | Control | + +* Lockable layer for LED functions and numpad +* vim-style arrow keys on hjkl (spacefn layer) +* corresponding Home/PgDn/PgUp/End on hjkl (tab layer) +* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift +* more bonus arrow keys on wasd (spacefn layer) +* media keys prev/next/play/vol+/vol- (spacefn layer) +* firmware bootloader button +* WS2812 RGB Underglow Support (not needed anymore to solder directly to the atmega) +* additional brackets that only work in german layout due to horrible placement +in the default qwertz layout + + +### Additional Credits +* Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan) +* nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) +* no-need-to-solder-on-chip picture: + +* special thanks to /u/TerryMathews who suggested the pin PB2, so soldering +directly on the atmega is not needed anymore. Happened on [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/4ghq9z/photos_satan_rgb60_w1976/d2k5tra) diff --git a/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh b/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh new file mode 100755 index 0000000000..d955ccf545 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh @@ -0,0 +1,4 @@ +#!/bin/bash +sudo dfu-programmer atmega32u4 erase --force +sudo dfu-programmer atmega32u4 flash clear_flash.hex +sudo dfu-programmer atmega32u4 reset diff --git a/keyboards/satan/keymaps/midi/Makefile b/keyboards/satan/keymaps/midi/Makefile new file mode 100644 index 0000000000..89c34b3946 --- /dev/null +++ b/keyboards/satan/keymaps/midi/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = yes # MIDI support (+2400 to 4200, depending on config) +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/midi/config.h b/keyboards/satan/keymaps/midi/config.h new file mode 100644 index 0000000000..8e10b04ec2 --- /dev/null +++ b/keyboards/satan/keymaps/midi/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/satan/keymaps/midi/keymap.c b/keyboards/satan/keymaps/midi/keymap.c new file mode 100644 index 0000000000..8378b4e4b9 --- /dev/null +++ b/keyboards/satan/keymaps/midi/keymap.c @@ -0,0 +1,77 @@ +#include "satan.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _ML 1 + +// readability +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |Midi|Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, TG(_ML), KC_RCTL), + +#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED) +/* Keymap _ML: MIDI Layer (Advanced) + * ,------------------------------------------------------------------------. + * | Exit | | | | | | | | | | | | | | + * |------------------------------------------------------------------------| + * | Ch+ | | C# | D# | | F# | G# | A# | | C# | D# | | | | + * |------------------------------------------------------------------------| + * | Mod | C | D | E | F | G | A | B | C | D | E | F | | + * |------------------------------------------------------------------------| + * | Sustain |Oct-|Oct+|Mod-|Mod+| | | |Tns-|Tns+|Tns0| Sustain | + * |------------------------------------------------------------------------| + * | | | | All notes off | | | | | + * `------------------------------------------------------------------------' + */ +[_ML] = KEYMAP_ANSI( + TG(_ML), MI_VEL_1, MI_VEL_2, MI_VEL_3, MI_VEL_4, MI_VEL_5, MI_VEL_6, MI_VEL_7, MI_VEL_8, MI_VEL_9, MI_VEL_10, XXXXXXX, XXXXXXX, XXXXXXX, \ + MI_CHU, XXXXXXX, MI_Cs, MI_Ds, XXXXXXX, MI_Fs, MI_Gs, MI_As, XXXXXXX, MI_Cs_1, MI_Ds_1, XXXXXXX, XXXXXXX, XXXXXXX, \ + MI_MOD, MI_C, MI_D, MI_E, MI_F, MI_G, MI_A, MI_B, MI_C_1, MI_D_1, MI_E_1, MI_F_1, _______, \ + MI_SUS, MI_OCTD, MI_OCTU, MI_MODSD, MI_MODSU, XXXXXXX, XXXXXXX, XXXXXXX, MI_TRNSD, MI_TRNSU, MI_TRNS_0, MI_SUS, \ + _______, _______, _______, MI_ALLOFF, _______, _______, _______, _______), +#elif defined(MIDI_ENABLE) && defined(MIDI_BASIC) +/* Keymap _ML: MIDI Layer (Advanced) + * ,------------------------------------------------------------------------. + * | Exit | | | | | | | | | | | | | | + * |------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |------------------------------------------------------------------------| + * | | | | | | | | | | | | | | + * |------------------------------------------------------------------------| + * | |MuOn|MuOf|MiOn|MiOf| | | | | | | | + * |------------------------------------------------------------------------| + * | | | | | | | | | + * `------------------------------------------------------------------------' + */ + +[_ML] = KEYMAP_ANSI( + TG(_ML), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______), +#endif +};
\ No newline at end of file diff --git a/keyboards/satan/keymaps/midi/readme.md b/keyboards/satan/keymaps/midi/readme.md new file mode 100644 index 0000000000..87844a854b --- /dev/null +++ b/keyboards/satan/keymaps/midi/readme.md @@ -0,0 +1 @@ +# Satan GH60 layout demonstrating MIDI key mapping diff --git a/keyboards/satan/keymaps/poker/keymap.c b/keyboards/satan/keymaps/poker/keymap.c new file mode 100644 index 0000000000..9da7d29b78 --- /dev/null +++ b/keyboards/satan/keymaps/poker/keymap.c @@ -0,0 +1,116 @@ +#include "satan.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_RL), MO(_FL), KC_RCTL), + +/* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | ~ | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | + * |-----------------------------------------------------------| + * | | Up| | | | |Cal| |Ins| |PrSc|Sclk|Paus| | + * |-----------------------------------------------------------| + * | |Left|Down|Rig| | | | | | |Home|PgUp| | + * |-----------------------------------------------------------| + * | | |App| | | |Vdn|Vup|Mute|End|PgDn| | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Keymap _RL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_RL] = KEYMAP_ANSI( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #else + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/keymaps/sethbc/Makefile b/keyboards/satan/keymaps/sethbc/Makefile new file mode 100644 index 0000000000..2a7ff27793 --- /dev/null +++ b/keyboards/satan/keymaps/sethbc/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/sethbc/keymap.c b/keyboards/satan/keymaps/sethbc/keymap.c new file mode 100644 index 0000000000..93610258b3 --- /dev/null +++ b/keyboards/satan/keymaps/sethbc/keymap.c @@ -0,0 +1,85 @@ +#include "satan.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +// Fillers to make layering more clear +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \ | ~ | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|bksp | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift| fn | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP_HHKB( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_MENU, KC_RCTL), + +[_FL] = KEYMAP_HHKB( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RESET, \ + KC_CAPS, _______, RGB_TOG,RGB_MOD,RGB_HUI, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, KC_DEL, \ + _______, KC_VOLD, RGB_HUD,RGB_SAI,RGB_SAD, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + _______, RGB_VAI,RGB_VAD,_______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______), + #else + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RESET, \ + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, KC_DEL, \ + _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/keymaps/sethbc/readme.md b/keyboards/satan/keymaps/sethbc/readme.md new file mode 100644 index 0000000000..ed0eb87016 --- /dev/null +++ b/keyboards/satan/keymaps/sethbc/readme.md @@ -0,0 +1,3 @@ +# sethbc's Satan GH60 layout + +HHKB style split right shift and split backspace. Largely based on the HHKB layout. diff --git a/keyboards/satan/keymaps/smt/Makefile b/keyboards/satan/keymaps/smt/Makefile new file mode 100644 index 0000000000..0c9ae824f6 --- /dev/null +++ b/keyboards/satan/keymaps/smt/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/smt/keymap.c b/keyboards/satan/keymaps/smt/keymap.c new file mode 100644 index 0000000000..bf919da87c --- /dev/null +++ b/keyboards/satan/keymaps/smt/keymap.c @@ -0,0 +1,141 @@ +#include "satan.h" + + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _FUNC 3 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK +}; + +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Custom macros +#define ALT_GRV ALT_T(KC_GRV) // Tap for Backtick, hold for Alt +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt) +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _QWERTY: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |Fn |Ctrl | + * `-----------------------------------------------------------' + */ +[_QWERTY] = KEYMAP_ANSI( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \ + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, SFT_ENT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(_FUNC),KC_RCTL), + + /* Keymap _COLEMAK: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| R| S| T| D| H| N| E| I| O| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| K| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |Fn |Ctrl | + * `-----------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP_ANSI( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN,KC_LBRC, KC_RBRC,KC_BSLS, \ + CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O ,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM,KC_DOT, KC_SLSH, SFT_ENT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(_FUNC),KC_RCTL), + + /* Keymap _DVORAK: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]|Backsp | + * |-----------------------------------------------------------| + * |HypTb| '| ,| .| P| Y| F| G| C| R| L| /| =| \ | + * |-----------------------------------------------------------| + * |CtrlEsc| A| O| E| U| I| D| H| T| N| S| -|Return | + * |-----------------------------------------------------------| + * |Shift | ;| Q| J| K| X| B| M| W| V| Z|ShiftEnter| + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |Fn |Ctrl | + * `-----------------------------------------------------------' + */ +[_DVORAK] = KEYMAP_ANSI( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC,KC_BSPC, \ + HPR_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, \ + CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, \ + KC_LSFT, KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(_FUNC),KC_RCTL), + + /* Keymap _FUNC: Function Layer + * ,-----------------------------------------------------------. + * | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + * |-----------------------------------------------------------| + * | |Hom| UP|End| | | |Qwt|Cmk|Dvk| |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | |LFT| DN| RT| | |LFT| DN| UP| RT|Vo+|Pg+| | + * |-----------------------------------------------------------| + * | | | |Prv|Ply|Nxt| | | |Vo-|Pg-| | + * |-----------------------------------------------------------| + * |RESET| | | | | | | | + * `-----------------------------------------------------------' + */ +[_FUNC] = KEYMAP_ANSI( + _______,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_DEL, \ + _______,KC_HOME,KC_UP ,KC_END ,_______,_______,_______,QWERTY ,COLEMAK,DVORAK ,_______,BL_DEC ,BL_INC ,BL_TOGG, \ + _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,KC_LEFT,KC_DOWN,KC_UP ,KC_RGHT,KC_VOLU,KC_PGUP ,_______, \ + _______ ,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,_______,_______,KC_VOLD,KC_PGDN ,_______, \ + RESET ,_______,_______ ,_______ ,_______,_______,_______,_______ + ) +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + } + return true; +} diff --git a/keyboards/satan/keymaps/smt/readme.md b/keyboards/satan/keymaps/smt/readme.md new file mode 100644 index 0000000000..7b706d6014 --- /dev/null +++ b/keyboards/satan/keymaps/smt/readme.md @@ -0,0 +1 @@ +# smt's Satan GH60 layout diff --git a/keyboards/satan/keymaps/stanleylai/config.h b/keyboards/satan/keymaps/stanleylai/config.h new file mode 100644 index 0000000000..7f4bb441c4 --- /dev/null +++ b/keyboards/satan/keymaps/stanleylai/config.h @@ -0,0 +1,15 @@ +#include "../../config.h" + +// Backlight configuration +#undef BACKLIGHT_LEVELS +#define BACKLIGHT_LEVELS 3 + +// Underlight configuration +#undef RGBLED_NUM +#define RGBLED_NUM 6 // Number of LEDs +#undef RGBLIGHT_HUE_STEP +#define RGBLIGHT_HUE_STEP 8 +#undef RGBLIGHT_SAT_STEP +#define RGBLIGHT_SAT_STEP 8 +#undef RGBLIGHT_VAL_STEP +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/satan/keymaps/stanleylai/keymap.c b/keyboards/satan/keymaps/stanleylai/keymap.c new file mode 100644 index 0000000000..979c122e55 --- /dev/null +++ b/keyboards/satan/keymaps/stanleylai/keymap.c @@ -0,0 +1,84 @@ +#include "satan.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RGBL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// See base_layer.png and rgb_layer.png for layout reference + +// Base Default Layer +// Mac Modifier Layout. Use BootMagic to toggle GUI and ALT positions. +[_BL] = KEYMAP_HHKB( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, MO(_FL), \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT), + +// Function layer +[_FL] = KEYMAP_HHKB( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_NO, \ + KC_NO, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, LT(_RGBL, KC_PGUP), KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_HOME, KC_PGDN, KC_END), + +// RGB Layer +[_RGBL] = KEYMAP_HHKB( + #ifdef RGBLIGHT_ENABLE + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #else + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/keymaps/unxmaal/Makefile b/keyboards/satan/keymaps/unxmaal/Makefile new file mode 100644 index 0000000000..ee94a67b4e --- /dev/null +++ b/keyboards/satan/keymaps/unxmaal/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/unxmaal/README.md b/keyboards/satan/keymaps/unxmaal/README.md new file mode 100644 index 0000000000..50ad0cf1fe --- /dev/null +++ b/keyboards/satan/keymaps/unxmaal/README.md @@ -0,0 +1,20 @@ +Unxmaal's GH60 Satan Layout +===================== +* Mostly stolen from /u/robotmaxtron + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +* Standard Mac ANSI layout +* Spacebar acts as space when tapped, Fn when held +* Menu acts as menu when tapped, Fn2 when held +* Layer1: + * Top row = `~, F1-F12, Del + * JKIL = arrow cluster +* Layer2: + * Top row = media controls + * JKIL = PgDn/Up/Home/Insert + * Backspace = Reset + +### Additional Credits +Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.
\ No newline at end of file diff --git a/keyboards/satan/keymaps/unxmaal/keymap.c b/keyboards/satan/keymaps/unxmaal/keymap.c new file mode 100644 index 0000000000..657602de02 --- /dev/null +++ b/keyboards/satan/keymaps/unxmaal/keymap.c @@ -0,0 +1,119 @@ +#include "satan.h" + + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _AL 1 +#define _FL 2 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ANSI Base, Mac style + * ,-----------------------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp | + * |-----------------------------------------------------------------------------| + * |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \| + * |-----------------------------------------------------------------------------| + * |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter | + * |-----------------------------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | + * |-----------------------------------------------------------------------------| + * |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl| + * `-----------------------------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + MO(_AL), KC_LALT,KC_LGUI, LT(_AL,KC_SPACE), KC_RGUI, KC_RALT, LT(_FL,KC_MENU), KC_RCTL), + /* + * Pok3r style arrow cluster + * ,-----------------------------------------------------------. + * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | + * |-----------------------------------------------------------| + * | | | | | | | | |Up| | | | | | + * |-----------------------------------------------------------| + * | | | | | | | |Left|Down|Right| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_AL] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \ + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | RGB on|RGB step|Hue+|Hue- |Sat+|Sat-|Val+| Val-| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP_ANSI( + #ifdef RGBLIGHT_ENABLE + _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______, _______), + #else + _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/pinout.txt b/keyboards/satan/pinout.txt new file mode 100644 index 0000000000..d1ad4ac883 --- /dev/null +++ b/keyboards/satan/pinout.txt @@ -0,0 +1 @@ +For WS2812B LED strip support, connect DIN from strip to PE2 on ATmega32u4 controller (see reference image controller.jpg)
\ No newline at end of file diff --git a/keyboards/satan/power.jpg b/keyboards/satan/power.jpg Binary files differnew file mode 100644 index 0000000000..0514eef5c7 --- /dev/null +++ b/keyboards/satan/power.jpg diff --git a/keyboards/satan/readme.md b/keyboards/satan/readme.md new file mode 100644 index 0000000000..aaf189746f --- /dev/null +++ b/keyboards/satan/readme.md @@ -0,0 +1,4 @@ +Satan GH60 keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/satan/rules.mk b/keyboards/satan/rules.mk new file mode 100644 index 0000000000..1102584d8a --- /dev/null +++ b/keyboards/satan/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/satan/satan.c b/keyboards/satan/satan.c new file mode 100644 index 0000000000..d2c5d5c205 --- /dev/null +++ b/keyboards/satan/satan.c @@ -0,0 +1,30 @@ +#include "satan.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB |= (1<<2); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB &= ~(1<<2); + } else { + // Turn capslock off + PORTB |= (1<<2); + } +} diff --git a/keyboards/satan/satan.h b/keyboards/satan/satan.h new file mode 100644 index 0000000000..f3cbd5305e --- /dev/null +++ b/keyboards/satan/satan.h @@ -0,0 +1,128 @@ +#ifndef SATAN_H +#define SATAN_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +/* Satan GH60 matrix layout (3c is right of 3d, 3d is shift) + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49| + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d | + * |-----------------------------------------------------------| + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \ +} +/* Satan GH60 ANSI layout + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |-----------------------------------------------------------| + * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +#define KEYMAP_ANSI( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ +} + +/* Satan HHKB matrix layout + * ,------------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 | + * |------------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |------------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |------------------------------------------------------------| + * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c | + * |------------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `------------------------------------------------------------' + */ + +#define KEYMAP_HHKB( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \ +} + +/* ISO w/ split right shift key matrix layout + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d | + * |-----------------------------------------------------------| + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c| + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + + swap 3c and 3d. 3c is right of 3d in reality + */ +#define KEYMAP_ISO_SPLITRSHIFT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif |
