diff options
Diffstat (limited to 'keyboards/sawnsprojects')
93 files changed, 4053 insertions, 6 deletions
diff --git a/keyboards/sawnsprojects/amber80/readme.md b/keyboards/sawnsprojects/amber80/readme.md new file mode 100644 index 0000000000..bc5dd417fc --- /dev/null +++ b/keyboards/sawnsprojects/amber80/readme.md @@ -0,0 +1,25 @@ +# Amber80 solder + +A TKL keyboard sold in several variants. + +1. [Solder](solder/): 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Amber80 +* Hardware Availability: Comming Soon + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/amber80/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/config.h b/keyboards/sawnsprojects/amber80/solder/config.h new file mode 100644 index 0000000000..90c9bc522c --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/config.h @@ -0,0 +1,72 @@ +/* Copyright 2022 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0xA801 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SawnsProjects X Yuutsu X Zlane +#define PRODUCT Amber80 Solder + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* Indicator */ +#define LED_CAPS_LOCK_PIN F5 +#define LED_SCROLL_LOCK_PIN B0 +#define LED_PIN_ON_STATE 0 +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B1, B2, B3, B7, D0, D1, F1, F0, D7, B4, D5, D3 } +#define MATRIX_COL_PINS { F4, F6, F7, C7, C6, B6, B5, D6, D4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* RGB */ +#define RGB_DI_PIN D2 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 22 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== or choose animations ==*/ + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST + #define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/sawnsprojects/amber80/solder/info.json b/keyboards/sawnsprojects/amber80/solder/info.json new file mode 100644 index 0000000000..49ca20594c --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/info.json @@ -0,0 +1,101 @@ +{ + "keyboard_name": "Amber80 SOLDER", + "url": "", + "maintainer": "SawnsProjects", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "K00 (B1,F4)", "x": 0, "y": 0 }, + { "label": "K10 (B2,F4)", "x": 1.25, "y": 0 }, + { "label": "K01 (B1,F6)", "x": 2.25, "y": 0 }, + { "label": "K11 (B2,F6)", "x": 3.25, "y": 0 }, + { "label": "K02 (B1,F7)", "x": 4.25, "y": 0 }, + { "label": "K12 (B2,F7)", "x": 5.5, "y": 0 }, + { "label": "K03 (B1,C7)", "x": 6.5, "y": 0 }, + { "label": "K13 (B2,C7)", "x": 7.5, "y": 0 }, + { "label": "K04 (B1,C6)", "x": 8.5, "y": 0 }, + { "label": "K14 (B2,C6)", "x": 9.75, "y": 0 }, + { "label": "K05 (B1,B6)", "x": 10.75, "y": 0 }, + { "label": "K15 (B2,B6)", "x": 11.75, "y": 0 }, + { "label": "K06 (B1,B5)", "x": 12.75, "y": 0 }, + { "label": "K16 (B2,B5)", "x": 14, "y": 0 }, + { "label": "K17 (B2,D6)", "x": 15.25, "y": 0 }, + { "label": "K08 (B1,D4)", "x": 16.25, "y": 0 }, + { "label": "K18 (B2,D4)", "x": 17.25, "y": 0 }, + { "label": "K20 (B3,F4)", "x": 0, "y": 1.25 }, + { "label": "K30 (B7,F4)", "x": 1, "y": 1.25 }, + { "label": "K21 (B3,F6)", "x": 2, "y": 1.25 }, + { "label": "K31 (B7,F6)", "x": 3, "y": 1.25 }, + { "label": "K22 (B3,F7)", "x": 4, "y": 1.25 }, + { "label": "K32 (B7,F7)", "x": 5, "y": 1.25 }, + { "label": "K23 (B3,C7)", "x": 6, "y": 1.25 }, + { "label": "K33 (B7,C7)", "x": 7, "y": 1.25 }, + { "label": "K24 (B3,C6)", "x": 8, "y": 1.25 }, + { "label": "K34 (B7,C6)", "x": 9, "y": 1.25 }, + { "label": "K25 (B3,B6)", "x": 10, "y": 1.25 }, + { "label": "K35 (B7,B6)", "x": 11, "y": 1.25 }, + { "label": "K26 (B3,B5)", "x": 12, "y": 1.25 }, + { "label": "K36 (B7,B5)", "x": 13, "y": 1.25 }, + { "label": "K27 (B3,D6)", "x": 14, "y": 1.25 }, + { "label": "K37 (B7,D6)", "x": 15.25, "y": 1.25 }, + { "label": "K28 (B3,D4)", "x": 16.25, "y": 1.25 }, + { "label": "K38 (B7,D4)", "x": 17.25, "y": 1.25 }, + { "label": "K40 (D0,F4)", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "K50 (D1,F4)", "x": 1.5, "y": 2.25 }, + { "label": "K41 (D0,F6)", "x": 2.5, "y": 2.25 }, + { "label": "K51 (D1,F6)", "x": 3.5, "y": 2.25 }, + { "label": "K42 (D0,F7)", "x": 4.5, "y": 2.25 }, + { "label": "K52 (D1,F7)", "x": 5.5, "y": 2.25 }, + { "label": "K43 (D0,C7)", "x": 6.5, "y": 2.25 }, + { "label": "K53 (D1,C7)", "x": 7.5, "y": 2.25 }, + { "label": "K44 (D0,C6)", "x": 8.5, "y": 2.25 }, + { "label": "K54 (D1,C6)", "x": 9.5, "y": 2.25 }, + { "label": "K45 (D0,B6)", "x": 10.5, "y": 2.25 }, + { "label": "K55 (D1,B6)", "x": 11.5, "y": 2.25 }, + { "label": "K46 (D0,B5)", "x": 12.5, "y": 2.25 }, + { "label": "K56 (D1,B5)", "x": 13.5, "y": 2.25, "w": 1.5 }, + { "label": "K57 (D1,D6)", "x": 15.25, "y": 2.25 }, + { "label": "K48 (D0,D4)", "x": 16.25, "y": 2.25 }, + { "label": "K58 (D1,D4)", "x": 17.25, "y": 2.25 }, + { "label": "K60 (F1,F4)", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "K70 (F0,F4)", "x": 1.75, "y": 3.25 }, + { "label": "K61 (F1,F6)", "x": 2.75, "y": 3.25 }, + { "label": "K71 (F0,F6)", "x": 3.75, "y": 3.25 }, + { "label": "K62 (F1,F7)", "x": 4.75, "y": 3.25 }, + { "label": "K72 (F0,F7)", "x": 5.75, "y": 3.25 }, + { "label": "K63 (F1,C7)", "x": 6.75, "y": 3.25 }, + { "label": "K73 (F0,C7)", "x": 7.75, "y": 3.25 }, + { "label": "K64 (F1,C6)", "x": 8.75, "y": 3.25 }, + { "label": "K74 (F0,C6)", "x": 9.75, "y": 3.25 }, + { "label": "K65 (F1,B6)", "x": 10.75, "y": 3.25 }, + { "label": "K75 (F0,B6)", "x": 11.75, "y": 3.25 }, + { "label": "K76 (F0,B5)", "x": 12.75, "y": 3.25, "w": 2.25 }, + { "label": "K80 (D7,F4)", "x": 0, "y": 4.25, "w": 1.25 }, + { "label": "K90 (B4,F4)", "x": 1.25, "y": 4.25 }, + { "label": "K81 (D7,F6)", "x": 2.25, "y": 4.25 }, + { "label": "K91 (B4,F6)", "x": 3.25, "y": 4.25 }, + { "label": "K82 (D7,F7)", "x": 4.25, "y": 4.25 }, + { "label": "K92 (B4,F7)", "x": 5.25, "y": 4.25 }, + { "label": "K83 (D7,C7)", "x": 6.25, "y": 4.25 }, + { "label": "K93 (B4,C7)", "x": 7.25, "y": 4.25 }, + { "label": "K84 (D7,C6)", "x": 8.25, "y": 4.25 }, + { "label": "K94 (B4,C6)", "x": 9.25, "y": 4.25 }, + { "label": "K85 (D7,B6)", "x": 10.25, "y": 4.25 }, + { "label": "K95 (B4,B6)", "x": 11.25, "y": 4.25 }, + { "label": "K86 (D7,B5)", "x": 12.25, "y": 4.25, "w": 1.75 }, + { "label": "K96 (B4,B5)", "x": 14, "y": 4.25 }, + { "label": "K88 (D7,D4)", "x": 16.25, "y": 4.25 }, + { "label": "KA0 (D5,F4)", "x": 0, "y": 5.25, "w": 1.5 }, + { "label": "KB0 (D3,F4)", "x": 1.5, "y": 5.25 }, + { "label": "KA1 (D5,F6)", "x": 2.5, "y": 5.25, "w": 1.5 }, + { "label": "KB3 (D3,C7)", "x": 4, "y": 5.25, "w": 7 }, + { "label": "KA6 (D5,B5)", "x": 11, "y": 5.25, "w": 1.5 }, + { "label": "KB6 (D3,B5)", "x": 12.5, "y": 5.25 }, + { "label": "KA7 (D5,D6)", "x": 13.5, "y": 5.25, "w": 1.5 }, + { "label": "KB7 (D3,D6)", "x": 15.25, "y": 5.25 }, + { "label": "KA8 (D5,D4)", "x": 16.25, "y": 5.25 }, + { "label": "KB8 (D3,D4)", "x": 17.25, "y": 5.25 } + ] + } + } +} diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..ffc9beb772 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c @@ -0,0 +1,30 @@ +/* Copyright 2022 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ) +};
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/amber80/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..60f00eb4ba --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Amber80 Solder
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..b8e8084374 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c @@ -0,0 +1,54 @@ +/* Copyright 2022 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +};
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/amber80/solder/keymaps/via/readme.md new file mode 100644 index 0000000000..3313fcc41a --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA keymap for Amber80 Solder
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/amber80/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..43061db1dd --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/readme.md b/keyboards/sawnsprojects/amber80/solder/readme.md new file mode 100644 index 0000000000..a429328702 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/readme.md @@ -0,0 +1,24 @@ +# Amber80 solder + + + +A TKL keyboard sold in several variants. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Amber80 +* Hardware Availability: Comming Soon + +Make example for this keyboard (after setting up your build environment): + + make sawnsprojects/amber80/solder:default + + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sawnsprojects/amber80/solder/rules.mk b/keyboards/sawnsprojects/amber80/solder/rules.mk new file mode 100644 index 0000000000..4613b7d460 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/solder.c b/keyboards/sawnsprojects/amber80/solder/solder.c new file mode 100644 index 0000000000..b7dbe1e558 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/solder.c @@ -0,0 +1,17 @@ +/* Copyright 2022 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "solder.h" diff --git a/keyboards/sawnsprojects/amber80/solder/solder.h b/keyboards/sawnsprojects/amber80/solder/solder.h new file mode 100644 index 0000000000..9f76795162 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/solder.h @@ -0,0 +1,44 @@ +/* Copyright 2022 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +#define LAYOUT_all( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K17, K08, K18, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, K38, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56, K57, K48, K58, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K76, \ + K80, K90, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K96, K88, \ + KA0, KB0, KA1, KB3, KA6, KB6, KA7, KB7, KA8, KB8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX, K08 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, K41, K42, K43, K44, K45, K46, XXX, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K60, K61, K62, K63, K64, K65, XXX, XXX, XXX }, \ + { K70, K71, K72, K73, K74, K75, K76, XXX, XXX }, \ + { K80, K81, K82, K83, K84, K85, K86, XXX, K88 }, \ + { K90, K91, K92, K93, K94, K95, K96, XXX, XXX }, \ + { KA0, KA1, XXX, XXX, XXX, XXX, KA6, KA7, KA8 }, \ + { KB0, XXX, XXX, KB3, XXX, XXX, KB6, KB7, KB8 }, \ +} + diff --git a/keyboards/sawnsprojects/krush/krush60/readme.md b/keyboards/sawnsprojects/krush/krush60/readme.md new file mode 100644 index 0000000000..515040f904 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/readme.md @@ -0,0 +1,25 @@ +# Krush60 + +A 60% keyboard sold in several variants. + +1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case +* Hardware Availability: [Mechkey.store](https://mechkey.store/) + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/krush/krush60/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/config.h b/keyboards/sawnsprojects/krush/krush60/solder/config.h new file mode 100644 index 0000000000..4cd1a1b39c --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/config.h @@ -0,0 +1,61 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0x6B32 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SawnsProjects +#define PRODUCT Krush60 - Solder + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW +/* Caps Lock */ +#define LED_CAPS_LOCK_PIN F0 +#define LED_PIN_ON_STATE 0 + +#define RGB_DI_PIN F1 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/info.json b/keyboards/sawnsprojects/krush/krush60/solder/info.json new file mode 100644 index 0000000000..d95c475509 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/info.json @@ -0,0 +1,1145 @@ +{ + "keyboard_name": "Krush60 Solder", + "url": "", + "maintainer": "MaiTheSan", + "layout_aliases": { + "LAYOUT_60_ansi_arrow_split_bs_7u_spc": "LAYOUT_60_ansi_arrow_tsangan_split_bs", + "LAYOUT_60_ansi_arrow_7u_spc": "LAYOUT_60_ansi_arrow_tsangan" + }, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":4, "y":3}, + {"x":5, "y":3}, + {"x":6, "y":3}, + {"x":7, "y":3}, + {"x":8, "y":3}, + {"x":9, "y":3}, + {"x":10, "y":3}, + {"x":11, "y":3}, + {"x":12, "y":3}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_isoenter_split_bs": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_split_bs": { + "layout": [ + {"x":0, "y": 0}, + {"x":1, "y": 0}, + {"x":2, "y": 0}, + {"x":3, "y": 0}, + {"x":4, "y": 0}, + {"x":5, "y": 0}, + {"x":6, "y": 0}, + {"x":7, "y": 0}, + {"x":8, "y": 0}, + {"x":9, "y": 0}, + {"x":10, "y": 0}, + {"x":11, "y": 0}, + {"x":12, "y": 0}, + {"x":13, "y": 0}, + {"x":14, "y": 0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_split_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_split_bs_spc": { + "layout": [ + {"x":0, "y": 0}, + {"x":1, "y": 0}, + {"x":2, "y": 0}, + {"x":3, "y": 0}, + {"x":4, "y": 0}, + {"x":5, "y": 0}, + {"x":6, "y": 0}, + {"x":7, "y": 0}, + {"x":8, "y": 0}, + {"x":9, "y": 0}, + {"x":10, "y": 0}, + {"x":11, "y": 0}, + {"x":12, "y": 0}, + {"x":13, "y": 0}, + {"x":14, "y": 0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_tsangan": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4, "w": 1.5}, + {"x":12.5, "y": 4}, + {"x":13.5, "y": 4, "w": 1.5} + ] + }, + "LAYOUT_60_ansi_tsangan_split_bs": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x": 0, "y": 4, "w": 1.5}, + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4}, + {"x": 13.5, "y": 4, "w": 1.5} + ] + }, + "LAYOUT_60_ansi_arrow_split_bs": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.25}, + {"x":1.25, "y": 4, "w": 1.25}, + {"x":2.5, "y": 4, "w": 1.25}, + {"x":3.75, "y": 4, "w": 6.25}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_split_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_split_bs_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_tsangan": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.25}, + {"x":1.25, "y": 4, "w": 1.25}, + {"x":2.5, "y": 4, "w": 1.25}, + {"x":3.75, "y": 4, "w": 6.25}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_tsangan_split_bs": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_tsangan_split_rshift": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.5}, + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4}, + {"x": 13.5, "y": 4, "w": 1.5} + ] + }, + "LAYOUT_60_tsangan_hhkb": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.5}, + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4}, + {"x": 13.5, "y": 4, "w": 1.5} + ] + } + } +} diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi/keymap.c new file mode 100644 index 0000000000..922ed190f6 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL + ), + + [1] = LAYOUT_60_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi/readme.md new file mode 100644 index 0000000000..56cc403367 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi/readme.md @@ -0,0 +1,3 @@ +# The 60_ansi keymap for krush60 solder + +* Standard 60% ANSI layout diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/keymap.c new file mode 100644 index 0000000000..b198c248bb --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/readme.md new file mode 100644 index 0000000000..d601194a07 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/readme.md @@ -0,0 +1,3 @@ +# The 60_ansi_arrow keymap for krush60 solder + +* 60% ANSI with Arrows layout diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs/keymap.c new file mode 100644 index 0000000000..7d31b685d3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_bs( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_60_ansi_arrow_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs/readme.md new file mode 100644 index 0000000000..618b721d22 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs/readme.md @@ -0,0 +1,4 @@ +# The 60_ansi_arrow_split_bs keymap for krush60 solder + +* 60% ANSI with Arrows layout + * split Backspace diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs_spc/keymap.c new file mode 100644 index 0000000000..ff75a4903f --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs_spc/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_bs_spc( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_60_ansi_arrow_split_bs_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs_spc/readme.md new file mode 100644 index 0000000000..db21ea0871 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_bs_spc/readme.md @@ -0,0 +1,5 @@ +# The 60_ansi_arrow_split_bs_spc keymap for krush60 solder + +* 60% ANSI with Arrows layout + * split Backspace + * split Spacebar diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_spc/keymap.c new file mode 100644 index 0000000000..95ad0386a5 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_spc/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_spc( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_60_ansi_arrow_split_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_spc/readme.md new file mode 100644 index 0000000000..68409cf47a --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_split_spc/readme.md @@ -0,0 +1,4 @@ +# The 60_ansi_arrow_split_spc keymap for krush60 solder + +* 60% ANSI with Arrows layout + * split Spacebar diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan/keymap.c new file mode 100644 index 0000000000..9e3ad13073 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_tsangan( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_60_ansi_arrow_tsangan( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan/readme.md new file mode 100644 index 0000000000..6590eb3034 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan/readme.md @@ -0,0 +1,4 @@ +# The 60_ansi_arrow_tsangan keymap for krush60 solder + +* 60% ANSI with Arrows layout + * 7u Spacebar diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan_split_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan_split_bs/keymap.c new file mode 100644 index 0000000000..e5723c0807 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan_split_bs/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_tsangan_split_bs( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_60_ansi_arrow_tsangan_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan_split_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan_split_bs/readme.md new file mode 100644 index 0000000000..b48a892a23 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_tsangan_split_bs/readme.md @@ -0,0 +1,5 @@ +# The 60_ansi_arrow_tsangan_split_bs keymap for krush60 solder + +* 60% ANSI with Arrows layout + * 7u Spacebar + * split Backspace diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs/keymap.c new file mode 100644 index 0000000000..1e9d26d20d --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_bs( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL + ), + + [1] = LAYOUT_60_ansi_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, KC_END, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs/readme.md new file mode 100644 index 0000000000..b0075b8c7b --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs/readme.md @@ -0,0 +1,4 @@ +# The 60_ansi_split_bs keymap for krush60 solder + +* 60% ANSI layout + * split Backspace diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs_spc/keymap.c new file mode 100644 index 0000000000..88a87b3f0d --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs_spc/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_bs_spc( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + + [1] = LAYOUT_60_ansi_split_bs_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, KC_END, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs_spc/readme.md new file mode 100644 index 0000000000..922e791c40 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_bs_spc/readme.md @@ -0,0 +1,5 @@ +# The 60_ansi_split_bs_spc keymap for krush60 solder + +* 60% ANSI layout + * split Backspace + * split Spacebar diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_spc/keymap.c new file mode 100644 index 0000000000..f180ac68b1 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_spc/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_spc( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + + [1] = LAYOUT_60_ansi_split_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, KC_END, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_spc/readme.md new file mode 100644 index 0000000000..d98e08c875 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_split_spc/readme.md @@ -0,0 +1,4 @@ +# The 60_ansi_split_spc keymap for krush60 solder + +* 60% ANSI layout + * split Spacebar diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan/keymap.c new file mode 100644 index 0000000000..17a06223eb --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_tsangan( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL + ), + + [1] = LAYOUT_60_ansi_tsangan( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan/readme.md new file mode 100644 index 0000000000..11453644ea --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan/readme.md @@ -0,0 +1,4 @@ +# The 60_ansi_tsangan keymap for krush60 solder + +* 60% ANSI layout + * Tsangan bottom row diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_bs/keymap.c new file mode 100644 index 0000000000..e749252274 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_bs/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_tsangan_split_bs( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL + ), + + [1] = LAYOUT_60_ansi_tsangan_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______,_______, _______, KC_DEL, KC_END, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_bs/readme.md new file mode 100644 index 0000000000..5bc89c6b26 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_bs/readme.md @@ -0,0 +1,5 @@ +# The 60_ansi_tsangan_split_bs keymap for krush60 solder + +* 60% ANSI layout + * Tsangan bottom row + * split Backspace diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_rshift/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_rshift/keymap.c new file mode 100644 index 0000000000..71bec072c6 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_rshift/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_tsangan_split_rshift( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), + + [1] = LAYOUT_60_ansi_tsangan_split_rshift( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_rshift/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_rshift/readme.md new file mode 100644 index 0000000000..63bfb36224 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_tsangan_split_rshift/readme.md @@ -0,0 +1,5 @@ +# The 60_ansi_tsangan_split_rshift keymap for krush60 solder + +* 60% ANSI layout + * Tsangan bottom row + * split Right Shift diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_isoenter_split_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_isoenter_split_bs/keymap.c new file mode 100644 index 0000000000..3a4e0d4ab9 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_isoenter_split_bs/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2021 SawnsProjects + * 2022 QMK / James Young (@noroadsleft) +* + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_isoenter_split_bs( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ), + + [1] = LAYOUT_60_isoenter_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_isoenter_split_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_isoenter_split_bs/readme.md new file mode 100644 index 0000000000..1a837607e9 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_isoenter_split_bs/readme.md @@ -0,0 +1,5 @@ +# The 60_isoenter_split_bs keymap for krush60 + +* 60% ANSI layout + * ISO Enter with 2.25u Left Shift + * split Backspace diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_hhkb/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_hhkb/keymap.c new file mode 100644 index 0000000000..e557c078aa --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_hhkb/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_tsangan_hhkb( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), + + [1] = LAYOUT_60_tsangan_hhkb( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_hhkb/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_hhkb/readme.md new file mode 100644 index 0000000000..3d98346483 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_hhkb/readme.md @@ -0,0 +1,6 @@ +# The 60_tsangan_hhkb keymap for krush60 solder + +* 60% ANSI layout + * Tsangan bottom row + * split Backspace + * split Right Shift diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..6e194461c4 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..1f6a41724d --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# The default keymap for krush60 solder + +Assigns a keycode to every possible switch location. diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..f9a62db7d3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2021 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/readme.md new file mode 100644 index 0000000000..a7ca3b9c27 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA keymap for krush60 solder diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/readme.md new file mode 100644 index 0000000000..36da34d372 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/readme.md @@ -0,0 +1,15 @@ +# Krush60 solder + + + +A 60% keyboard PCB made and sold by SawnsProjects with Nuxros in [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674). + +* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) +* Hardware Supported: 60% keyboard case +* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674) + +Make example for this keyboard (after setting up your build environment): + + make sawnsprojects/krush60/solder:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/rules.mk b/keyboards/sawnsprojects/krush/krush60/solder/rules.mk new file mode 100644 index 0000000000..841e5bc1a2 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/rules.mk @@ -0,0 +1,19 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow + +LAYOUTS = 60_ansi 60_ansi_arrow 60_ansi_arrow_split_bs_7u_spc diff --git a/keyboards/sawnsprojects/krush/krush60/solder/solder.c b/keyboards/sawnsprojects/krush/krush60/solder/solder.c new file mode 100644 index 0000000000..2fb9b24f8c --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/solder.c @@ -0,0 +1,17 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "solder.h"
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/solder.h b/keyboards/sawnsprojects/krush/krush60/solder/solder.h new file mode 100644 index 0000000000..9fb7f834f2 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/solder.h @@ -0,0 +1,354 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │10 │01 │11 │02 │12 │03 │13 │04 │14 │05 │15 │06 │26 │17 │ │26 │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ └─┬─────┤ + * │20 │30 │21 │31 │22 │32 │23 │33 │24 │34 │25 │35 │36 │46 │ │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ┌──┴┐47 │ ISO Enter + * │40 │50 │41 │51 │42 │52 │43 │53 │44 │54 │45 │55 │47 │ │46 │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌─┴───┴────┤ ┌──────┬───┬───┐ + * │60 │70 │61 │71 │62 │72 │63 │73 │64 │74 │65 │66 │77 │ │66 │ 2.75u RShift │75 │66 │77 │ 1.75/1/1u RShift + * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬┴──┬───┼───┤ └──────────┘ └──────┴───┴───┘ + * │80 │90 │81 │82 │92 │84 │94 │85 │86 │95 │97 │ Split Space Arrow + * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘ + * ┌────┬────┬────┬────────┬────┬──────────┬────┬────┬────┬────┐ + * │80 │90 │81 │82 │92 │84 │94 │85 │95 │97 │ Split Space + * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┴────┘ + * ┌────┬────┬────┬────────────────────────┬───┬───┬───┬───┬───┐ + * │80 │90 │81 │92 │94 │85 │86 │95 │97 │ 6.25u Arrow + * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ + * ┌────┬────┬────┬────────────────────────┬────┬────┬────┬────┐ + * │80 │90 │81 │92 │94 │85 │95 │97 │ Standard + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + * ┌─────┬───┬─────┬───────────────────────────┬───┬───┬───┬───┐ + * │80 │90 │81 │92 │85 │86 │95 │97 │ 7u Arrow + * └─────┴───┴─────┴───────────────────────────┴───┴───┴───┴───┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │80 │90 │81 │92 │85 │95 │97 │ 7u Tsangan/WKL/HHKB + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ + +#define LAYOUT_all( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K77, \ + K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_isoenter_split_bs(\ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_split_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, K82, XXX, K84, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_split_bs_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, K82, XXX, K84, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_tsangan( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_tsangan_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_arrow_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, XXX, XXX, XXX, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_arrow_split_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_arrow_split_bs_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_arrow_tsangan( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, XXX, XXX, XXX, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_arrow( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, XXX, XXX, XXX, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_arrow_tsangan_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, XXX, XXX, XXX, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_ansi_tsangan_split_rshift( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, K77 }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ +} + +#define LAYOUT_60_tsangan_hhkb( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, K77 }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ +} diff --git a/keyboards/sawnsprojects/krush/krush65/readme.md b/keyboards/sawnsprojects/krush/krush65/readme.md new file mode 100644 index 0000000000..34e996f0bf --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/readme.md @@ -0,0 +1,25 @@ +# Krush65 + +A 65% keyboard sold in several variants. + +1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush65" with krush keyboard case. Compatible with some KBD67 case. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Krush65 +* Hardware Availability: [Mechkey.store](https://mechkey.store/) + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/krush/krush65/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/config.h b/keyboards/sawnsprojects/krush/krush65/solder/config.h new file mode 100644 index 0000000000..1afab16a0e --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/config.h @@ -0,0 +1,69 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0x6B31 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SawnsProjects +#define PRODUCT Krush65 - Solder + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 } +#define UNUSED_PINS + +/* indicator */ +// #define LED_CAPS_LOCK_PIN F0 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW +/* Caps Lock */ +#define LED_CAPS_LOCK_PIN F0 +#define LED_PIN_ON_STATE 0 + +/* rotary */ +#define ENCODERS_PAD_A { D0 } +#define ENCODERS_PAD_B { B3 } +#define ENCODER_RESOLUTION 4 + +#define RGB_DI_PIN F1 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c new file mode 100644 index 0000000000..039f8739b4 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c @@ -0,0 +1,58 @@ +/* Copyright 2020 Neil Brian Ramirez + * Copyright 2021 drashna jael're (@drashna) + * Copyright 2021 uybv + * Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "encoder_actions.h" + +#ifdef ENCODER_ENABLE + +# ifdef ENCODERS +static uint8_t encoder_state[ENCODERS] = {0}; +static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY; +static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY; +# endif + +void encoder_action_unregister(void) { +# ifdef ENCODERS + for (int index = 0; index < ENCODERS; ++index) { + if (encoder_state[index]) { + keyevent_t encoder_event = (keyevent_t) { + .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], + .pressed = false, + .time = (timer_read() | 1) + }; + encoder_state[index] = 0; + action_exec(encoder_event); + } + } +# endif +} + +void encoder_action_register(uint8_t index, bool clockwise) { +# ifdef ENCODERS + keyevent_t encoder_event = (keyevent_t) { + .key = clockwise ? encoder_cw[index] : encoder_ccw[index], + .pressed = true, + .time = (timer_read() | 1) + }; + encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); + action_exec(encoder_event); +# endif +} + +#endif
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h new file mode 100644 index 0000000000..098210d40c --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h @@ -0,0 +1,21 @@ +/* Copyright 2020 Neil Brian Ramirez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "quantum.h" + +void encoder_action_unregister(void); + +void encoder_action_register(uint8_t index, bool clockwise);
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/info.json b/keyboards/sawnsprojects/krush/krush65/solder/info.json new file mode 100644 index 0000000000..b72946bf55 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/info.json @@ -0,0 +1,239 @@ +{ + "keyboard_name": "Krush65 Solder", + "url": "", + "maintainer": "MaiTheSan", + "layout_aliases": { + "LAYOUT_all": "LAYOUT_65_ansi_blocker_split_bs_sp" + }, + "layouts": { + "LAYOUT_65_ansi_blocker_split_bs_sp": { + "layout": [ + {"label":"K00 (B1,C7)", "x":0, "y":0}, + {"label":"K10 (B2,C7)", "x":1, "y":0}, + {"label":"K01 (B1,C6)", "x":2, "y":0}, + {"label":"K11 (B2,C6)", "x":3, "y":0}, + {"label":"K02 (B1,B6)", "x":4, "y":0}, + {"label":"K12 (B2,B6)", "x":5, "y":0}, + {"label":"K03 (B1,B5)", "x":6, "y":0}, + {"label":"K13 (B2,B5)", "x":7, "y":0}, + {"label":"K04 (B1,B4)", "x":8, "y":0}, + {"label":"K14 (B2,B4)", "x":9, "y":0}, + {"label":"K05 (B1,D7)", "x":10, "y":0}, + {"label":"K15 (B2,D7)", "x":11, "y":0}, + {"label":"K06 (B1,D5)", "x":12, "y":0}, + {"label":"K26 (D1,D5)", "x":13, "y":0}, + {"label":"K17 (B2,D3)", "x":14, "y":0}, + {"label":"K07 (B1,D3)", "x":15, "y":0}, + + {"label":"K20 (D1,C7)", "x":0, "y":1, "w":1.5}, + {"label":"K30 (D2,C7)", "x":1.5, "y":1}, + {"label":"K21 (D1,C6)", "x":2.5, "y":1}, + {"label":"K31 (D2,C6)", "x":3.5, "y":1}, + {"label":"K22 (D1,B6)", "x":4.5, "y":1}, + {"label":"K32 (D2,B6)", "x":5.5, "y":1}, + {"label":"K23 (D1,B5)", "x":6.5, "y":1}, + {"label":"K33 (D2,B5)", "x":7.5, "y":1}, + {"label":"K24 (D1,B4)", "x":8.5, "y":1}, + {"label":"K34 (D2,B4)", "x":9.5, "y":1}, + {"label":"K25 (D1,D7)", "x":10.5, "y":1}, + {"label":"K35 (D2,D7)", "x":11.5, "y":1}, + {"label":"K36 (D2,D5)", "x":12.5, "y":1}, + {"label":"K46 (D4,D5)", "x":13.5, "y":1, "w":1.5}, + {"label":"K37 (D2,D3)", "x":15, "y":1}, + + {"label":"K40 (D4,C7)", "x":0, "y":2, "w":1.75}, + {"label":"K50 (D6,C7)", "x":1.75, "y":2}, + {"label":"K41 (D4,C6)", "x":2.75, "y":2}, + {"label":"K51 (D6,C6)", "x":3.75, "y":2}, + {"label":"K42 (D4,B6)", "x":4.75, "y":2}, + {"label":"K52 (D6,B6)", "x":5.75, "y":2}, + {"label":"K43 (D4,B5)", "x":6.75, "y":2}, + {"label":"K53 (D6,B5)", "x":7.75, "y":2}, + {"label":"K44 (D4,B4)", "x":8.75, "y":2}, + {"label":"K54 (D6,B4)", "x":9.75, "y":2}, + {"label":"K45 (D4,D7)", "x":10.75, "y":2}, + {"label":"K55 (D6,D7)", "x":11.75, "y":2}, + {"label":"K47 (D4,D3)", "x":12.75, "y":2, "w":2.25}, + {"label":"K57 (D6,D3)", "x":15, "y":2}, + + {"label":"K60 (F6,C7)", "x":0, "y":3, "w":2.25}, + {"label":"K70 (F7,C7)", "x":2.25, "y":3}, + {"label":"K61 (F6,C6)", "x":3.25, "y":3}, + {"label":"K71 (F7,C6)", "x":4.25, "y":3}, + {"label":"K62 (F6,B6)", "x":5.25, "y":3}, + {"label":"K72 (F7,B6)", "x":6.25, "y":3}, + {"label":"K63 (F6,B5)", "x":7.25, "y":3}, + {"label":"K73 (F7,B5)", "x":8.25, "y":3}, + {"label":"K64 (F6,B4)", "x":9.25, "y":3}, + {"label":"K74 (F7,B4)", "x":10.25, "y":3}, + {"label":"K65 (F6,D7)", "x":11.25, "y":3}, + {"label":"K75 (F7,D7)", "x":12.25, "y":3, "w":1.75}, + {"label":"K77 (F7,D3)", "x":14, "y":3}, + {"label":"K67 (F6,D3)", "x":15, "y":3}, + + {"label":"K80 (F5,C7)", "x":0, "y":4, "w":1.25}, + {"label":"K90 (F4,C7)", "x":1.25, "y":4, "w":1.25}, + {"label":"K81 (F5,C6)", "x":2.5, "y":4, "w":1.25}, + {"label":"K82 (F5,B6)", "x":3.75, "y":4, "w":2.25}, + {"label":"K92 (F4,B6)", "x":6, "y":4, "w":1.25}, + {"label":"K93 (F4,B5)", "x":7.25, "y":4, "w":2.75}, + {"label":"K94 (F4,B4)", "x":10, "y":4, "w":1.25}, + {"label":"K85 (F5,D7)", "x":11.25, "y":4, "w":1.25}, + {"label":"K95 (F4,D7)", "x":13, "y":4}, + {"label":"K97 (F4,D3)", "x":14, "y":4}, + {"label":"K87 (F5,D3)", "x":15, "y":4} + ] + }, + "LAYOUT_65_ansi_blocker": { + "layout": [ + {"label":"K00 (B1,C7)", "x":0, "y":0}, + {"label":"K10 (B2,C7)", "x":1, "y":0}, + {"label":"K01 (B1,C6)", "x":2, "y":0}, + {"label":"K11 (B2,C6)", "x":3, "y":0}, + {"label":"K02 (B1,B6)", "x":4, "y":0}, + {"label":"K12 (B2,B6)", "x":5, "y":0}, + {"label":"K03 (B1,B5)", "x":6, "y":0}, + {"label":"K13 (B2,B5)", "x":7, "y":0}, + {"label":"K04 (B1,B4)", "x":8, "y":0}, + {"label":"K14 (B2,B4)", "x":9, "y":0}, + {"label":"K05 (B1,D7)", "x":10, "y":0}, + {"label":"K15 (B2,D7)", "x":11, "y":0}, + {"label":"K06 (B1,D5)", "x":12, "y":0}, + {"label":"K26 (D1,D5)", "x":13, "y":0, "w":2}, + {"label":"K07 (B1,D3)", "x":15, "y":0}, + + {"label":"K20 (D1,C7)", "x":0, "y":1, "w":1.5}, + {"label":"K30 (D2,C7)", "x":1.5, "y":1}, + {"label":"K21 (D1,C6)", "x":2.5, "y":1}, + {"label":"K31 (D2,C6)", "x":3.5, "y":1}, + {"label":"K22 (D1,B6)", "x":4.5, "y":1}, + {"label":"K32 (D2,B6)", "x":5.5, "y":1}, + {"label":"K23 (D1,B5)", "x":6.5, "y":1}, + {"label":"K33 (D2,B5)", "x":7.5, "y":1}, + {"label":"K24 (D1,B4)", "x":8.5, "y":1}, + {"label":"K34 (D2,B4)", "x":9.5, "y":1}, + {"label":"K25 (D1,D7)", "x":10.5, "y":1}, + {"label":"K35 (D2,D7)", "x":11.5, "y":1}, + {"label":"K36 (D2,D5)", "x":12.5, "y":1}, + {"label":"K46 (D4,D5)", "x":13.5, "y":1, "w":1.5}, + {"label":"K37 (D2,D3)", "x":15, "y":1}, + + {"label":"K40 (D4,C7)", "x":0, "y":2, "w":1.75}, + {"label":"K50 (D6,C7)", "x":1.75, "y":2}, + {"label":"K41 (D4,C6)", "x":2.75, "y":2}, + {"label":"K51 (D6,C6)", "x":3.75, "y":2}, + {"label":"K42 (D4,B6)", "x":4.75, "y":2}, + {"label":"K52 (D6,B6)", "x":5.75, "y":2}, + {"label":"K43 (D4,B5)", "x":6.75, "y":2}, + {"label":"K53 (D6,B5)", "x":7.75, "y":2}, + {"label":"K44 (D4,B4)", "x":8.75, "y":2}, + {"label":"K54 (D6,B4)", "x":9.75, "y":2}, + {"label":"K45 (D4,D7)", "x":10.75, "y":2}, + {"label":"K55 (D6,D7)", "x":11.75, "y":2}, + {"label":"K47 (D4,D3)", "x":12.75, "y":2, "w":2.25}, + {"label":"K57 (D6,D3)", "x":15, "y":2}, + + {"label":"K60 (F6,C7)", "x":0, "y":3, "w":2.25}, + {"label":"K70 (F7,C7)", "x":2.25, "y":3}, + {"label":"K61 (F6,C6)", "x":3.25, "y":3}, + {"label":"K71 (F7,C6)", "x":4.25, "y":3}, + {"label":"K62 (F6,B6)", "x":5.25, "y":3}, + {"label":"K72 (F7,B6)", "x":6.25, "y":3}, + {"label":"K63 (F6,B5)", "x":7.25, "y":3}, + {"label":"K73 (F7,B5)", "x":8.25, "y":3}, + {"label":"K64 (F6,B4)", "x":9.25, "y":3}, + {"label":"K74 (F7,B4)", "x":10.25, "y":3}, + {"label":"K65 (F6,D7)", "x":11.25, "y":3}, + {"label":"K75 (F7,D7)", "x":12.25, "y":3, "w":1.75}, + {"label":"K77 (F7,D3)", "x":14, "y":3}, + {"label":"K67 (F6,D3)", "x":15, "y":3}, + + {"label":"K80 (F5,C7)", "x":0, "y":4, "w":1.25}, + {"label":"K90 (F4,C7)", "x":1.25, "y":4, "w":1.25}, + {"label":"K81 (F5,C6)", "x":2.5, "y":4, "w":1.25}, + {"label":"K92 (F4,B6)", "x":3.75, "y":4, "w":6.25}, + {"label":"K94 (F4,B4)", "x":10, "y":4, "w":1.25}, + {"label":"K85 (F5,D7)", "x":11.25, "y":4, "w":1.25}, + {"label":"K95 (F4,D7)", "x":13, "y":4}, + {"label":"K97 (F4,D3)", "x":14, "y":4}, + {"label":"K87 (F5,D3)", "x":15, "y":4} + ] + }, + "LAYOUT_65_ansi_blocker_split_bs": { + "layout": [ + {"label":"K00 (B1,C7)", "x":0, "y":0}, + {"label":"K10 (B2,C7)", "x":1, "y":0}, + {"label":"K01 (B1,C6)", "x":2, "y":0}, + {"label":"K11 (B2,C6)", "x":3, "y":0}, + {"label":"K02 (B1,B6)", "x":4, "y":0}, + {"label":"K12 (B2,B6)", "x":5, "y":0}, + {"label":"K03 (B1,B5)", "x":6, "y":0}, + {"label":"K13 (B2,B5)", "x":7, "y":0}, + {"label":"K04 (B1,B4)", "x":8, "y":0}, + {"label":"K14 (B2,B4)", "x":9, "y":0}, + {"label":"K05 (B1,D7)", "x":10, "y":0}, + {"label":"K15 (B2,D7)", "x":11, "y":0}, + {"label":"K06 (B1,D5)", "x":12, "y":0}, + {"label":"K26 (D1,D5)", "x":13, "y":0}, + {"label":"K17 (B2,D3)", "x":14, "y":0}, + {"label":"K07 (B1,D3)", "x":15, "y":0}, + + {"label":"K20 (D1,C7)", "x":0, "y":1, "w":1.5}, + {"label":"K30 (D2,C7)", "x":1.5, "y":1}, + {"label":"K21 (D1,C6)", "x":2.5, "y":1}, + {"label":"K31 (D2,C6)", "x":3.5, "y":1}, + {"label":"K22 (D1,B6)", "x":4.5, "y":1}, + {"label":"K32 (D2,B6)", "x":5.5, "y":1}, + {"label":"K23 (D1,B5)", "x":6.5, "y":1}, + {"label":"K33 (D2,B5)", "x":7.5, "y":1}, + {"label":"K24 (D1,B4)", "x":8.5, "y":1}, + {"label":"K34 (D2,B4)", "x":9.5, "y":1}, + {"label":"K25 (D1,D7)", "x":10.5, "y":1}, + {"label":"K35 (D2,D7)", "x":11.5, "y":1}, + {"label":"K36 (D2,D5)", "x":12.5, "y":1}, + {"label":"K46 (D4,D5)", "x":13.5, "y":1, "w":1.5}, + {"label":"K37 (D2,D3)", "x":15, "y":1}, + + {"label":"K40 (D4,C7)", "x":0, "y":2, "w":1.75}, + {"label":"K50 (D6,C7)", "x":1.75, "y":2}, + {"label":"K41 (D4,C6)", "x":2.75, "y":2}, + {"label":"K51 (D6,C6)", "x":3.75, "y":2}, + {"label":"K42 (D4,B6)", "x":4.75, "y":2}, + {"label":"K52 (D6,B6)", "x":5.75, "y":2}, + {"label":"K43 (D4,B5)", "x":6.75, "y":2}, + {"label":"K53 (D6,B5)", "x":7.75, "y":2}, + {"label":"K44 (D4,B4)", "x":8.75, "y":2}, + {"label":"K54 (D6,B4)", "x":9.75, "y":2}, + {"label":"K45 (D4,D7)", "x":10.75, "y":2}, + {"label":"K55 (D6,D7)", "x":11.75, "y":2}, + {"label":"K47 (D4,D3)", "x":12.75, "y":2, "w":2.25}, + {"label":"K57 (D6,D3)", "x":15, "y":2}, + + {"label":"K60 (F6,C7)", "x":0, "y":3, "w":2.25}, + {"label":"K70 (F7,C7)", "x":2.25, "y":3}, + {"label":"K61 (F6,C6)", "x":3.25, "y":3}, + {"label":"K71 (F7,C6)", "x":4.25, "y":3}, + {"label":"K62 (F6,B6)", "x":5.25, "y":3}, + {"label":"K72 (F7,B6)", "x":6.25, "y":3}, + {"label":"K63 (F6,B5)", "x":7.25, "y":3}, + {"label":"K73 (F7,B5)", "x":8.25, "y":3}, + {"label":"K64 (F6,B4)", "x":9.25, "y":3}, + {"label":"K74 (F7,B4)", "x":10.25, "y":3}, + {"label":"K65 (F6,D7)", "x":11.25, "y":3}, + {"label":"K75 (F7,D7)", "x":12.25, "y":3, "w":1.75}, + {"label":"K77 (F7,D3)", "x":14, "y":3}, + {"label":"K67 (F6,D3)", "x":15, "y":3}, + + {"label":"K80 (F5,C7)", "x":0, "y":4, "w":1.25}, + {"label":"K90 (F4,C7)", "x":1.25, "y":4, "w":1.25}, + {"label":"K81 (F5,C6)", "x":2.5, "y":4, "w":1.25}, + {"label":"K92 (F4,B6)", "x":3.75, "y":4, "w":6.25}, + {"label":"K94 (F4,B4)", "x":10, "y":4, "w":1.25}, + {"label":"K85 (F5,D7)", "x":11.25, "y":4, "w":1.25}, + {"label":"K95 (F4,D7)", "x":13, "y":4}, + {"label":"K97 (F4,D3)", "x":14, "y":4}, + {"label":"K87 (F5,D3)", "x":15, "y":4} + ] + } + } +} diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c new file mode 100644 index 0000000000..b684282b65 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SPC, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_65_ansi_blocker( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md new file mode 100644 index 0000000000..d69d73d349 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md @@ -0,0 +1,3 @@ +# The ansi_blocker keymap for krush65 solder + +* 65% ANSI layout with blocker diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c new file mode 100644 index 0000000000..c238e92a59 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_65_ansi_blocker_split_bs( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_65_ansi_blocker_split_bs( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md new file mode 100644 index 0000000000..fffebdf6a0 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md @@ -0,0 +1,4 @@ +# The ansi_blocker_split_bs keymap for krush65 solder + +* 65% ANSI layout with blocker + * split Backspace diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..fcadaac844 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..9e7dd186d9 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# The default keymap for krush65 solder + +* 65% ANSI layout with blocker + * split Backspace + * split Spacebar diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c new file mode 100644 index 0000000000..d252058bde --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c @@ -0,0 +1,75 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + switch (get_highest_layer(layer_state)) { + case 0: + // main layer - move mouse right (CW) and left (CCW) + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + break; + default: + // other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW) + if (clockwise) { + tap_code16(C(KC_EQL)); + } else { + tap_code16(C(KC_MINS)); + } + break; + } + } + return false; +}
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md new file mode 100644 index 0000000000..ff710c521f --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md @@ -0,0 +1 @@ +#custom keymap for MikeTheSan
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..59eebc774e --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md new file mode 100644 index 0000000000..1c17d4e53b --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md @@ -0,0 +1,5 @@ +# The VIA keymap for krush65 solder + +* 65% ANSI layout with blocker + * split Backspace + * split Spacebar diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/sawnsprojects/krush/krush65/solder/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/readme.md new file mode 100644 index 0000000000..27af715eda --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/readme.md @@ -0,0 +1,15 @@ +# Krush65 solder + + + +A 65% keyboard PCB made and sold by SawnsProjects with Nuxros in [mechkey.store](https://mechkey.store/blogs/store-updates/introducing-krush-65). + +* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) +* Hardware Supported: Krush65 +* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1410794482649627) + +Make example for this keyboard (after setting up your build environment): + + make sawnsprojects/krush65/solder:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/rules.mk new file mode 100644 index 0000000000..9b2c9fa3e8 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/rules.mk @@ -0,0 +1,20 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +ENCODER_ENABLE = yes + +LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/solder.c b/keyboards/sawnsprojects/krush/krush65/solder/solder.c new file mode 100644 index 0000000000..b8a7729725 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/solder.c @@ -0,0 +1,53 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "solder.h" +#include "encoder_actions.h" + + /* Custom encoder control - handles CW/CCW turning of encoder + * Default behavior: + * main layer: + * CW: move mouse right + * CCW: move mouse left + * other layers: + * CW: = (equals/plus - increase slider in Adobe products) + * CCW: - (minus/underscore - decrease slider in adobe products) + */ +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + switch (get_highest_layer(layer_state)) { + + case 0: + // main layer - move mouse right (CW) and left (CCW) + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + break; + default: + // other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW) + if (clockwise) { + tap_code16(C(KC_EQL)); + } else { + tap_code16(C(KC_MINS)); + } + break; + } + } + return true; +}
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/solder.h b/keyboards/sawnsprojects/krush/krush65/solder/solder.h new file mode 100644 index 0000000000..11140aac9c --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/solder.h @@ -0,0 +1,96 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │10 │01 │11 │02 │12 │03 │13 │04 │14 │05 │15 │06 │26 │17 │07 │ │26 │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ └─┬─────┤ + * │20 │30 │21 │31 │22 │32 │23 │33 │24 │34 │25 │35 │36 │46 │37 │ │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ ┌──┴┐47 │ ISO Enter + * │40 │50 │41 │51 │42 │52 │43 │53 │44 │54 │45 │55 │47 │57 │ │46 │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ └───┴────┘ + * │60 │70 │61 │71 │62 │72 │63 │73 │64 │74 │65 │75 │77 │67 │ + * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │80 │90 │81 │82 │92 │93 │94 │85 │ │95 │97 │87 │ Split Spacebar + * └────┴────┴────┴────────┴────┴──────────┴────┴────┘ └───┴───┴───┘ + * ┌────┬────┬────┬────────────────────────┬────┬────┐ + * │80 │90 │81 │92 │94 │85 │ Standard + * └────┴────┴────┴────────────────────────┴────┴────┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┐ + * │80 │90 │81 │92 │85 │ Tsangan + * └─────┴───┴─────┴───────────────────────────┴─────┘ + */ + +#define LAYOUT_65_ansi_blocker( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K92, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, K57 }, \ + { K60, K61, K62, K63, K64, K65, XXX, K67 }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, K87 }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +#define LAYOUT_65_ansi_blocker_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K92, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, K57 }, \ + { K60, K61, K62, K63, K64, K65, XXX, K67 }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, K87 }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +#define LAYOUT_65_ansi_blocker_split_bs_sp( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, K57 }, \ + { K60, K61, K62, K63, K64, K65, XXX, K67 }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, K82, XXX, XXX, K85, XXX, K87 }, \ + { K90, XXX, K92, K93, K94, K95, XXX, K97 }, \ +} diff --git a/keyboards/sawnsprojects/satxri6key/config.h b/keyboards/sawnsprojects/satxri6key/config.h index 129f2536b9..5ad3f20093 100644 --- a/keyboards/sawnsprojects/satxri6key/config.h +++ b/keyboards/sawnsprojects/satxri6key/config.h @@ -75,3 +75,48 @@ #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Sets the default mode, if none has been set + +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/sawnsprojects/satxri6key/keymaps/via/keymap.c b/keyboards/sawnsprojects/satxri6key/keymaps/via/keymap.c index e09ef997fe..0a2bdb39dc 100644 --- a/keyboards/sawnsprojects/satxri6key/keymaps/via/keymap.c +++ b/keyboards/sawnsprojects/satxri6key/keymaps/via/keymap.c @@ -145,7 +145,7 @@ static void render_anim(void) { } // Used to draw on to the oled screen -void oled_task_user(void) { +bool oled_task_user(void) { render_anim(); // renders pixelart oled_set_cursor(0, 0); // sets cursor to (row, column) using charactar spacing (5 rows on 128x32 screen, anything more will overflow back to the top) @@ -160,5 +160,6 @@ void oled_task_user(void) { led_t led_state = host_keyboard_led_state(); // caps lock stuff, prints CAPS on new line if caps led is on oled_set_cursor(0, 1); oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/sawnsprojects/satxri6key/rules.mk b/keyboards/sawnsprojects/satxri6key/rules.mk index b1039452ec..a2b29b5ae5 100644 --- a/keyboards/sawnsprojects/satxri6key/rules.mk +++ b/keyboards/sawnsprojects/satxri6key/rules.mk @@ -7,14 +7,11 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output diff --git a/keyboards/sawnsprojects/vcl65/readme.md b/keyboards/sawnsprojects/vcl65/readme.md new file mode 100644 index 0000000000..025c41badf --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/readme.md @@ -0,0 +1,25 @@ +# VCL65 solder + +A 65% keyboard sold in several variants. + +1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "VCL65" with Lotus 65 lite keyboard case. Compatible with some 65% traymount case, VCL65 and Lotus65. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) & [Hoaq](https://github.com/itsmehoaq) +* Hardware Supported: Lotus65 lite, VCL65, 65% traymount case +* Hardware Availability: Private Discord GB + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/vcl65/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/config.h b/keyboards/sawnsprojects/vcl65/solder/config.h new file mode 100644 index 0000000000..bf1a7cdde6 --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/config.h @@ -0,0 +1,66 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0x1727 +#define DEVICE_VER 0x0001 +#define MANUFACTURER VCL x SawnsProjects +#define PRODUCT VCL65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F6, F7, F0, F4, B1 } +#define MATRIX_COL_PINS { B2, B5, F5, C7, B4, C6, D7, D6, D4, D5, D3, D2, B6, D1, D0 } +#define UNUSED_PINS + +/* indicator */ +// #define LED_CAPS_LOCK_PIN F0 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW +/* Caps Lock */ +#define LED_CAPS_LOCK_PIN F1 +#define LED_PIN_ON_STATE 0 +/* rotary */ + +#define RGB_DI_PIN B7 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/info.json b/keyboards/sawnsprojects/vcl65/solder/info.json new file mode 100644 index 0000000000..bae3093b4f --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/info.json @@ -0,0 +1,81 @@ +{ + "keyboard_name": "VCL65 Solder", + "url": "", + "maintainer": "MaiTheSan", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "K00 (F6,B2)", "x": 0, "y": 0 }, + { "label": "K01 (F6,B5)", "x": 1, "y": 0 }, + { "label": "K02 (F6,F5)", "x": 2, "y": 0 }, + { "label": "K03 (F6,C7)", "x": 3, "y": 0 }, + { "label": "K04 (F6,B4)", "x": 4, "y": 0 }, + { "label": "K05 (F6,C6)", "x": 5, "y": 0 }, + { "label": "K06 (F6,D7)", "x": 6, "y": 0 }, + { "label": "K07 (F6,D6)", "x": 7, "y": 0 }, + { "label": "K08 (F6,D4)", "x": 8, "y": 0 }, + { "label": "K09 (F6,D5)", "x": 9, "y": 0 }, + { "label": "K0A (F6,D3)", "x": 10, "y": 0 }, + { "label": "K0B (F6,D2)", "x": 11, "y": 0 }, + { "label": "K0C (F6,B6)", "x": 12, "y": 0 }, + { "label": "K0D (F6,D1)", "x": 13, "y": 0 }, + { "label": "K2C (F4,B6)", "x": 14, "y": 0 }, + { "label": "K0E (F6,D0)", "x": 15, "y": 0 }, + { "label": "K10 (F7,B2)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K11 (F7,B5)", "x": 1.5, "y": 1 }, + { "label": "K12 (F7,F5)", "x": 2.5, "y": 1 }, + { "label": "K13 (F7,C7)", "x": 3.5, "y": 1 }, + { "label": "K14 (F7,B4)", "x": 4.5, "y": 1 }, + { "label": "K15 (F7,C6)", "x": 5.5, "y": 1 }, + { "label": "K16 (F7,D7)", "x": 6.5, "y": 1 }, + { "label": "K17 (F7,D6)", "x": 7.5, "y": 1 }, + { "label": "K18 (F7,D4)", "x": 8.5, "y": 1 }, + { "label": "K19 (F7,D5)", "x": 9.5, "y": 1 }, + { "label": "K1A (F7,D3)", "x": 10.5, "y": 1 }, + { "label": "K1B (F7,D2)", "x": 11.5, "y": 1 }, + { "label": "K1C (F7,B6)", "x": 12.5, "y": 1 }, + { "label": "K1D (F7,D1)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K1E (F7,D0)", "x": 15, "y": 1 }, + { "label": "K20 (F4,B2)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K21 (F4,B5)", "x": 1.75, "y": 2 }, + { "label": "K22 (F4,F5)", "x": 2.75, "y": 2 }, + { "label": "K23 (F4,C7)", "x": 3.75, "y": 2 }, + { "label": "K24 (F4,B4)", "x": 4.75, "y": 2 }, + { "label": "K25 (F4,C6)", "x": 5.75, "y": 2 }, + { "label": "K26 (F4,D7)", "x": 6.75, "y": 2 }, + { "label": "K27 (F4,D6)", "x": 7.75, "y": 2 }, + { "label": "K28 (F4,D4)", "x": 8.75, "y": 2 }, + { "label": "K29 (F4,D5)", "x": 9.75, "y": 2 }, + { "label": "K2A (F4,D3)", "x": 10.75, "y": 2 }, + { "label": "K2B (F4,D2)", "x": 11.75, "y": 2 }, + { "label": "K2D (F4,D1)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K2E (F4,D0)", "x": 15, "y": 2 }, + { "label": "K30 (B0,B2)", "x": 0, "y": 3, "w": 1.25 }, + { "label": "K31 (B0,B5)", "x": 1.25, "y": 3 }, + { "label": "K32 (B0,F5)", "x": 2.25, "y": 3 }, + { "label": "K33 (B0,C7)", "x": 3.25, "y": 3 }, + { "label": "K34 (B0,B4)", "x": 4.25, "y": 3 }, + { "label": "K35 (B0,C6)", "x": 5.25, "y": 3 }, + { "label": "K36 (B0,D7)", "x": 6.25, "y": 3 }, + { "label": "K37 (B0,D6)", "x": 7.25, "y": 3 }, + { "label": "K38 (B0,D4)", "x": 8.25, "y": 3 }, + { "label": "K39 (B0,D5)", "x": 9.25, "y": 3 }, + { "label": "K3A (B0,D3)", "x": 10.25, "y": 3 }, + { "label": "K3B (B0,D2)", "x": 11.25, "y": 3 }, + { "label": "K3C (B0,B6)", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K3D (B0,D1)", "x": 14, "y": 3 }, + { "label": "K3E (B0,D0)", "x": 15, "y": 3 }, + { "label": "K40 (B1,B2)", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K41 (B1,B5)", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K42 (B1,F5)", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K46 (B1,D7)", "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "K49 (B1,D5)", "x": 10, "y": 4 }, + { "label": "K4A (B1,D3)", "x": 11, "y": 4 }, + { "label": "K4B (B1,D2)", "x": 12, "y": 4 }, + { "label": "K4C (B1,B6)", "x": 13, "y": 4 }, + { "label": "K4D (B1,D1)", "x": 14, "y": 4 }, + { "label": "K4E (B1,D0)", "x": 15, "y": 4 } + ] + } + } +} diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/vcl65/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..b65e36d9e5 --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/default/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2022 Hoaq + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PSCR, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_INS, + QK_BOOT, RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS + ), + +};
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/vcl65/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..d4a1e6fc31 --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for VCL65 solder
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/keymap.c b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/keymap.c new file mode 100644 index 0000000000..86209da7dc --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/readme.md b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/readme.md new file mode 100644 index 0000000000..dd1d8879df --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/readme.md @@ -0,0 +1 @@ +# The custom keymap for VCL65 solder by SawnsProjects diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/rules.mk b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..497a4964ea --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2022 Hoaq + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PSCR, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_INS, + QK_BOOT, RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/readme.md new file mode 100644 index 0000000000..31baf7fc71 --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA keymap for VCL65 solder
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/readme.md b/keyboards/sawnsprojects/vcl65/solder/readme.md new file mode 100644 index 0000000000..06b44ab730 --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/readme.md @@ -0,0 +1,23 @@ +# VCL65 solder + + + +A 65% keyboard PCB made and sold under the name "VCL65 Solder" by SawnsProjects with Hoaq in Private Discord GB. + +* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) & [Hoaq](https://github.com/itsmehoaq) +* Hardware Supported: Lotus65 lite, VCL65, 65% traymount case +* Hardware Availability: Private Discord GB + +Make example for this keyboard (after setting up your build environment): + + make sawnsprojects/vcl65/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sawnsprojects/vcl65/solder/rules.mk b/keyboards/sawnsprojects/vcl65/solder/rules.mk new file mode 100644 index 0000000000..538e0d1bda --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/solder.c b/keyboards/sawnsprojects/vcl65/solder/solder.c new file mode 100644 index 0000000000..2fb9b24f8c --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/solder.c @@ -0,0 +1,17 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "solder.h"
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/solder.h b/keyboards/sawnsprojects/vcl65/solder/solder.h new file mode 100644 index 0000000000..8c150a1b96 --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/solder.h @@ -0,0 +1,36 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, K49, K4A, K4B, K4C, K4D, K4E }, \ +} + |