diff options
Diffstat (limited to 'keyboards/sawnsprojects')
63 files changed, 3293 insertions, 0 deletions
diff --git a/keyboards/sawnsprojects/krush/krush60/readme.md b/keyboards/sawnsprojects/krush/krush60/readme.md new file mode 100644 index 0000000000..515040f904 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/readme.md @@ -0,0 +1,25 @@ +# Krush60 + +A 60% keyboard sold in several variants. + +1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case +* Hardware Availability: [Mechkey.store](https://mechkey.store/) + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/krush/krush60/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/config.h b/keyboards/sawnsprojects/krush/krush60/solder/config.h new file mode 100644 index 0000000000..b15361ed14 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/config.h @@ -0,0 +1,60 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0x6B32 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SawnsProjects +#define PRODUCT Krush60 - Solder + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW +/* Caps Lock */ +#define LED_CAPS_LOCK_PIN F0 + +#define RGB_DI_PIN F1 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/info.json b/keyboards/sawnsprojects/krush/krush60/solder/info.json new file mode 100644 index 0000000000..884b768eb6 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/info.json @@ -0,0 +1,1274 @@ +{ + "keyboard_name": "Krush60 Solder", + "url": "", + "maintainer": "MaiTheSan", + "layouts": { + "LAYOUT_60_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_arrow": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.25}, + {"x":1.25, "y": 4, "w": 1.25}, + {"x":2.5, "y": 4, "w": 1.25}, + {"x":3.75, "y": 4, "w": 6.25}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_split_bs_7u_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_split_bs": { + "layout": [ + {"x":0, "y": 0}, + {"x":1, "y": 0}, + {"x":2, "y": 0}, + {"x":3, "y": 0}, + {"x":4, "y": 0}, + {"x":5, "y": 0}, + {"x":6, "y": 0}, + {"x":7, "y": 0}, + {"x":8, "y": 0}, + {"x":9, "y": 0}, + {"x":10, "y": 0}, + {"x":11, "y": 0}, + {"x":12, "y": 0}, + {"x":13, "y": 0}, + {"x":14, "y": 0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_split_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_split_bs_spc": { + "layout": [ + {"x":0, "y": 0}, + {"x":1, "y": 0}, + {"x":2, "y": 0}, + {"x":3, "y": 0}, + {"x":4, "y": 0}, + {"x":5, "y": 0}, + {"x":6, "y": 0}, + {"x":7, "y": 0}, + {"x":8, "y": 0}, + {"x":9, "y": 0}, + {"x":10, "y": 0}, + {"x":11, "y": 0}, + {"x":12, "y": 0}, + {"x":13, "y": 0}, + {"x":14, "y": 0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_7u_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4, "w": 1.5}, + {"x":12.5, "y": 4}, + {"x":13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_ansi_split_bs_7u_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x": 0, "y": 4, "w": 1.5}, + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4}, + {"x": 13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_ansi_arrow_split_bs": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.25}, + {"x":1.25, "y": 4, "w": 1.25}, + {"x":2.5, "y": 4, "w": 1.25}, + {"x":3.75, "y": 4, "w": 6.25}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_split_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_split_bs_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_7u_spc": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_tsangan": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.5}, + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4}, + {"x": 13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_ansi_tsangan_split_bs": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.5}, + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4}, + {"x": 13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_iso_tsangan": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4, "w": 1.5}, + {"x":12.5, "y": 4}, + {"x":13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_iso_tsangan": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4, "w": 1.5}, + {"x":12.5, "y": 4}, + {"x":13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x":0, "y":3, "w":2}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":4, "y":3}, + {"x":5, "y":3}, + {"x":6, "y":3}, + {"x":7, "y":3}, + {"x":8, "y":3}, + {"x":9, "y":3}, + {"x":10, "y":3}, + {"x":11, "y":3}, + {"x":12, "y":3}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4, "w": 1.5}, + {"x":12.5, "y": 4}, + {"x":13.5, "y": 4, "w": 1.5}, + ] + } + } +} diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/keymap.c new file mode 100644 index 0000000000..b8b48194a6 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/readme.md new file mode 100644 index 0000000000..e8ab0065f2 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder full layout
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/keymap.c new file mode 100644 index 0000000000..3d454579cb --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_7u_spc( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL + ) + [1] = LAYOUT_60_ansi_7u_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/readme.md new file mode 100644 index 0000000000..b7ec93ca7b --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi 7U
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/keymap.c new file mode 100644 index 0000000000..b6fb88bb8a --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +};
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/readme.md new file mode 100644 index 0000000000..561b615d24 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi arrow
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/keymap.c new file mode 100644 index 0000000000..f22e073bf5 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_7u_spc( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow_7u_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +};
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/readme.md new file mode 100644 index 0000000000..578753b3ae --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi 7U arrow
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/keymap.c new file mode 100644 index 0000000000..8ba292cfd4 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_bs( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/readme.md new file mode 100644 index 0000000000..505c1ec9bc --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi arrow split backspace
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/keymap.c new file mode 100644 index 0000000000..56a713d56e --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_bs_7u_spc( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow_split_bs_7u_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +};
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/readme.md new file mode 100644 index 0000000000..059534d5df --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi arrow, 7u spacebar & split backspace
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/keymap.c new file mode 100644 index 0000000000..8673ce02d1 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_bs_spc( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow_split_bs_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/readme.md new file mode 100644 index 0000000000..2355c409a0 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi arrow, split spacebar & split backspace
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/keymap.c new file mode 100644 index 0000000000..1da11323e4 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_spc( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow_split_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/readme.md new file mode 100644 index 0000000000..af2fce05c2 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi arrow & split spacebar
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/keymap.c new file mode 100644 index 0000000000..ff0fd21deb --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_bs( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + + [0] = LAYOUT_60_ansi_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/readme.md new file mode 100644 index 0000000000..80634c350f --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout split backspace
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/keymap.c new file mode 100644 index 0000000000..431fb483fd --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_bs_7u_spc( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL), + + [0] = LAYOUT_60_ansi_split_bs_7u_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/readme.md new file mode 100644 index 0000000000..70b3a8617b --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout 7u spacebar & split backspace
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/keymap.c new file mode 100644 index 0000000000..e3982e2507 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_bs_spc( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + + [1] = LAYOUT_60_ansi_split_bs_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/readme.md new file mode 100644 index 0000000000..6e1981c3ce --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout split spacebar & split backspace
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/keymap.c new file mode 100644 index 0000000000..abcd186ccc --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_spc( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + + [1] = LAYOUT_60_ansi_split_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/readme.md new file mode 100644 index 0000000000..80634c350f --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout split backspace
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/keymap.c new file mode 100644 index 0000000000..cc8067cc99 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_tsangan( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ) + [1] = LAYOUT_60_ansi_tsangan( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/readme.md new file mode 100644 index 0000000000..5bdb4a1026 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder Tsangan
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/keymap.c new file mode 100644 index 0000000000..9fba9e6bf3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_tsangan_split_bs( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ) + [1] = LAYOUT_60_ansi_tsangan_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/readme.md new file mode 100644 index 0000000000..03c0444cc6 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder Tsangan & split backspace
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..f1ef9911dd --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2021 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ + * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + */ + [0] = LAYOUT_60_ansi( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ) +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..88157e507e --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/readme.md @@ -0,0 +1 @@ +# The keymap default for krush60
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..a6e005bbbb --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(0), KC_LEFT, KC_LALT, KC_LCTL + ), + [1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/readme.md new file mode 100644 index 0000000000..8f8d7a19bd --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/readme.md @@ -0,0 +1 @@ +# The keymap VIA for krush60
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/readme.md new file mode 100644 index 0000000000..36da34d372 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/readme.md @@ -0,0 +1,15 @@ +# Krush60 solder + + + +A 60% keyboard PCB made and sold by SawnsProjects with Nuxros in [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674). + +* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) +* Hardware Supported: 60% keyboard case +* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674) + +Make example for this keyboard (after setting up your build environment): + + make sawnsprojects/krush60/solder:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/rules.mk b/keyboards/sawnsprojects/krush/krush60/solder/rules.mk new file mode 100644 index 0000000000..439db87a58 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow + +LAYOUTS = 60_ansi 60_ansi_arrow 60_ansi_arrow_split_bs_7u_spc diff --git a/keyboards/sawnsprojects/krush/krush60/solder/solder.c b/keyboards/sawnsprojects/krush/krush60/solder/solder.c new file mode 100644 index 0000000000..2fb9b24f8c --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/solder.c @@ -0,0 +1,17 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "solder.h"
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/solder.h b/keyboards/sawnsprojects/krush/krush60/solder/solder.h new file mode 100644 index 0000000000..d4847b9124 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/solder.h @@ -0,0 +1,335 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" +#define XXX KC_NO +//x +#define LAYOUT_all( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K77, \ + K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +//LAYOUT_60_ansi +//x +#define LAYOUT_60_ansi( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_iso +//x +#define LAYOUT_60_iso(\ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_split_bs +#define LAYOUT_60_ansi_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_split_spc +#define LAYOUT_60_ansi_split_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, K82, XXX, K84, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_split_bs_spc +#define LAYOUT_60_ansi_split_bs_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, K82, XXX, K84, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_7u_spc +#define LAYOUT_60_ansi_7u_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_split_7u_spc +#define LAYOUT_60_ansi_split_bs_7u_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_arrow_split_bs +#define LAYOUT_60_ansi_arrow_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_arrow_split_spc +#define LAYOUT_60_ansi_arrow_split_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_arrow_split_bs_spc +#define LAYOUT_60_ansi_arrow_split_bs_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_arrow_7u_spc +#define LAYOUT_60_ansi_arrow_7u_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_arrow +//x +#define LAYOUT_60_ansi_arrow( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//x +//LAYOUT_60_ansi_arrow_split_bs_7u_spc +#define LAYOUT_60_ansi_arrow_split_bs_7u_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_tsangan +#define LAYOUT_60_ansi_tsangan( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_tsangan_split_bs +#define LAYOUT_60_ansi_tsangan_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_iso_tsangan +#define LAYOUT_60_iso_tsangan LAYOUT_60_ansi_tsangan +//LAYOUT_60_iso_tsangan_split_bs +#define LAYOUT_60_iso_tsangan_split_bs LAYOUT_60_ansi_tsangan_split_bs + + diff --git a/keyboards/sawnsprojects/krush/krush65/readme.md b/keyboards/sawnsprojects/krush/krush65/readme.md new file mode 100644 index 0000000000..34e996f0bf --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/readme.md @@ -0,0 +1,25 @@ +# Krush65 + +A 65% keyboard sold in several variants. + +1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush65" with krush keyboard case. Compatible with some KBD67 case. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Krush65 +* Hardware Availability: [Mechkey.store](https://mechkey.store/) + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/krush/krush65/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/config.h b/keyboards/sawnsprojects/krush/krush65/solder/config.h new file mode 100644 index 0000000000..9356e6cfba --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/config.h @@ -0,0 +1,68 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0x6B31 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SawnsProjects +#define PRODUCT Krush65 - Solder + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 } +#define UNUSED_PINS + +/* indicator */ +// #define LED_CAPS_LOCK_PIN F0 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW +/* Caps Lock */ +#define LED_CAPS_LOCK_PIN F0 + +/* rotary */ +#define ENCODERS_PAD_A { D0 } +#define ENCODERS_PAD_B { B3 } +#define ENCODER_RESOLUTION 4 + +#define RGB_DI_PIN F1 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c new file mode 100644 index 0000000000..039f8739b4 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c @@ -0,0 +1,58 @@ +/* Copyright 2020 Neil Brian Ramirez + * Copyright 2021 drashna jael're (@drashna) + * Copyright 2021 uybv + * Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "encoder_actions.h" + +#ifdef ENCODER_ENABLE + +# ifdef ENCODERS +static uint8_t encoder_state[ENCODERS] = {0}; +static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY; +static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY; +# endif + +void encoder_action_unregister(void) { +# ifdef ENCODERS + for (int index = 0; index < ENCODERS; ++index) { + if (encoder_state[index]) { + keyevent_t encoder_event = (keyevent_t) { + .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], + .pressed = false, + .time = (timer_read() | 1) + }; + encoder_state[index] = 0; + action_exec(encoder_event); + } + } +# endif +} + +void encoder_action_register(uint8_t index, bool clockwise) { +# ifdef ENCODERS + keyevent_t encoder_event = (keyevent_t) { + .key = clockwise ? encoder_cw[index] : encoder_ccw[index], + .pressed = true, + .time = (timer_read() | 1) + }; + encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); + action_exec(encoder_event); +# endif +} + +#endif
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h new file mode 100644 index 0000000000..098210d40c --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h @@ -0,0 +1,21 @@ +/* Copyright 2020 Neil Brian Ramirez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "quantum.h" + +void encoder_action_unregister(void); + +void encoder_action_register(uint8_t index, bool clockwise);
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/info.json b/keyboards/sawnsprojects/krush/krush65/solder/info.json new file mode 100644 index 0000000000..6c10d660e2 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/info.json @@ -0,0 +1,299 @@ +{ + "keyboard_name": "Krush65 Solder", + "url": "", + "maintainer": "MaiTheSan", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "K00 (B1,C7)", "x": 0, "y": 0 }, + { "label": "K10 (B2,C7)", "x": 1, "y": 0 }, + { "label": "K01 (B1,C6)", "x": 2, "y": 0 }, + { "label": "K11 (B2,C6)", "x": 3, "y": 0 }, + { "label": "K02 (B1,B6)", "x": 4, "y": 0 }, + { "label": "K12 (B2,B6)", "x": 5, "y": 0 }, + { "label": "K03 (B1,B5)", "x": 6, "y": 0 }, + { "label": "K13 (B2,B5)", "x": 7, "y": 0 }, + { "label": "K04 (B1,B4)", "x": 8, "y": 0 }, + { "label": "K14 (B2,B4)", "x": 9, "y": 0 }, + { "label": "K05 (B1,D7)", "x": 10, "y": 0 }, + { "label": "K15 (B2,D7)", "x": 11, "y": 0 }, + { "label": "K06 (B1,D5)", "x": 12, "y": 0 }, + { "label": "K26 (D1,D5)", "x": 13, "y": 0 }, + { "label": "K17 (B2,D3)", "x": 14, "y": 0 }, + { "label": "K07 (B1,D3)", "x": 15, "y": 0 }, + { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, + { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, + { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, + { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, + { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, + { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, + { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, + { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, + { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, + { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, + { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, + { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, + { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K37 (D2,D3)", "x": 15, "y": 1 }, + { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, + { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, + { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, + { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, + { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, + { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, + { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, + { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, + { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, + { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, + { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, + { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K57 (D6,D3)", "x": 15, "y": 2 }, + { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, + { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, + { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, + { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, + { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, + { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, + { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, + { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, + { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, + { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, + { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, + { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K77 (F7,D3)", "x": 14, "y": 3 }, + { "label": "K67 (F6,D3)", "x": 15, "y": 3 }, + { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K82 (F5,B6)", "x": 3.75, "y": 4, "w": 2.25 }, + { "label": "K92 (F4,B6)", "x": 6, "y": 4, "w": 1.25 }, + { "label": "K93 (F4,B5)", "x": 7.25, "y": 4, "w": 2.75 }, + { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, + { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "K95 (F4,D7)", "x": 13, "y": 4 }, + { "label": "K97 (F4,D3)", "x": 14, "y": 4 }, + { "label": "K87 (F5,D3)", "x": 15, "y": 4 } + ] + }, + "LAYOUT_65_ansi_blocker_split_bs_sp": { + "layout": [ + { "label": "K00 (B1,C7)", "x": 0, "y": 0 }, + { "label": "K10 (B2,C7)", "x": 1, "y": 0 }, + { "label": "K01 (B1,C6)", "x": 2, "y": 0 }, + { "label": "K11 (B2,C6)", "x": 3, "y": 0 }, + { "label": "K02 (B1,B6)", "x": 4, "y": 0 }, + { "label": "K12 (B2,B6)", "x": 5, "y": 0 }, + { "label": "K03 (B1,B5)", "x": 6, "y": 0 }, + { "label": "K13 (B2,B5)", "x": 7, "y": 0 }, + { "label": "K04 (B1,B4)", "x": 8, "y": 0 }, + { "label": "K14 (B2,B4)", "x": 9, "y": 0 }, + { "label": "K05 (B1,D7)", "x": 10, "y": 0 }, + { "label": "K15 (B2,D7)", "x": 11, "y": 0 }, + { "label": "K06 (B1,D5)", "x": 12, "y": 0 }, + { "label": "K26 (D1,D5)", "x": 13, "y": 0 }, + { "label": "K17 (B2,D3)", "x": 14, "y": 0 }, + { "label": "K07 (B1,D3)", "x": 15, "y": 0 }, + { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, + { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, + { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, + { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, + { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, + { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, + { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, + { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, + { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, + { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, + { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, + { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, + { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K37 (D2,D3)", "x": 15, "y": 1 }, + { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, + { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, + { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, + { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, + { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, + { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, + { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, + { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, + { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, + { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, + { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, + { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K57 (D6,D3)", "x": 15, "y": 2 }, + { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, + { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, + { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, + { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, + { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, + { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, + { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, + { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, + { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, + { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, + { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, + { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K77 (F7,D3)", "x": 14, "y": 3 }, + { "label": "K67 (F6,D3)", "x": 15, "y": 3 }, + { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K82 (F5,B6)", "x": 3.75, "y": 4, "w": 2.25 }, + { "label": "K92 (F4,B6)", "x": 6, "y": 4, "w": 1.25 }, + { "label": "K93 (F4,B5)", "x": 7.25, "y": 4, "w": 2.75 }, + { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, + { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "K95 (F4,D7)", "x": 13, "y": 4 }, + { "label": "K97 (F4,D3)", "x": 14, "y": 4 }, + { "label": "K87 (F5,D3)", "x": 15, "y": 4 } + ] + }, + + "LAYOUT_65_ansi_blocker": { + "layout": [ + { "label": "K00 (B1,C7)", "x": 0, "y": 0 }, + { "label": "K10 (B2,C7)", "x": 1, "y": 0 }, + { "label": "K01 (B1,C6)", "x": 2, "y": 0 }, + { "label": "K11 (B2,C6)", "x": 3, "y": 0 }, + { "label": "K02 (B1,B6)", "x": 4, "y": 0 }, + { "label": "K12 (B2,B6)", "x": 5, "y": 0 }, + { "label": "K03 (B1,B5)", "x": 6, "y": 0 }, + { "label": "K13 (B2,B5)", "x": 7, "y": 0 }, + { "label": "K04 (B1,B4)", "x": 8, "y": 0 }, + { "label": "K14 (B2,B4)", "x": 9, "y": 0 }, + { "label": "K05 (B1,D7)", "x": 10, "y": 0 }, + { "label": "K15 (B2,D7)", "x": 11, "y": 0 }, + { "label": "K06 (B1,D5)", "x": 12, "y": 0 }, + { "label": "K26 (D1,D5)", "x": 13, "y": 0, "w": 2 }, + { "label": "K07 (B1,D3)", "x": 15, "y": 0 }, + { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, + { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, + { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, + { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, + { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, + { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, + { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, + { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, + { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, + { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, + { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, + { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, + { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K37 (D2,D3)", "x": 15, "y": 1 }, + { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, + { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, + { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, + { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, + { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, + { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, + { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, + { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, + { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, + { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, + { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, + { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K57 (D6,D3)", "x": 15, "y": 2 }, + { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, + { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, + { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, + { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, + { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, + { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, + { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, + { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, + { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, + { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, + { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, + { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K77 (F7,D3)", "x": 14, "y": 3 }, + { "label": "K67 (F6,D3)", "x": 15, "y": 3 }, + { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K92 (F4,B6)", "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, + { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "K95 (F4,D7)", "x": 13, "y": 4 }, + { "label": "K97 (F4,D3)", "x": 14, "y": 4 }, + { "label": "K87 (F5,D3)", "x": 15, "y": 4 } + ] + }, + "LAYOUT_65_ansi_blocker_split_bs": { + "layout": [ + { "label": "K00 (B1,C7)", "x": 0, "y": 0 }, + { "label": "K10 (B2,C7)", "x": 1, "y": 0 }, + { "label": "K01 (B1,C6)", "x": 2, "y": 0 }, + { "label": "K11 (B2,C6)", "x": 3, "y": 0 }, + { "label": "K02 (B1,B6)", "x": 4, "y": 0 }, + { "label": "K12 (B2,B6)", "x": 5, "y": 0 }, + { "label": "K03 (B1,B5)", "x": 6, "y": 0 }, + { "label": "K13 (B2,B5)", "x": 7, "y": 0 }, + { "label": "K04 (B1,B4)", "x": 8, "y": 0 }, + { "label": "K14 (B2,B4)", "x": 9, "y": 0 }, + { "label": "K05 (B1,D7)", "x": 10, "y": 0 }, + { "label": "K15 (B2,D7)", "x": 11, "y": 0 }, + { "label": "K06 (B1,D5)", "x": 12, "y": 0 }, + { "label": "K26 (D1,D5)", "x": 13, "y": 0 }, + { "label": "K17 (B2,D3)", "x": 14, "y": 0 }, + { "label": "K07 (B1,D3)", "x": 15, "y": 0 }, + { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, + { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, + { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, + { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, + { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, + { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, + { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, + { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, + { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, + { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, + { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, + { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, + { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K37 (D2,D3)", "x": 15, "y": 1 }, + { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, + { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, + { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, + { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, + { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, + { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, + { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, + { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, + { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, + { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, + { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, + { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K57 (D6,D3)", "x": 15, "y": 2 }, + { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, + { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, + { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, + { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, + { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, + { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, + { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, + { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, + { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, + { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, + { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, + { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K77 (F7,D3)", "x": 14, "y": 3 }, + { "label": "K67 (F6,D3)", "x": 15, "y": 3 }, + { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K92 (F4,B6)", "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, + { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "K95 (F4,D7)", "x": 13, "y": 4 }, + { "label": "K97 (F4,D3)", "x": 14, "y": 4 }, + { "label": "K87 (F5,D3)", "x": 15, "y": 4 } + ] + } + } +} diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c new file mode 100644 index 0000000000..99c42be954 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c @@ -0,0 +1,39 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SPC, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_65_ansi_blocker( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; + diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md new file mode 100644 index 0000000000..181cc9a013 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md @@ -0,0 +1 @@ +# The keymap for krush65 solder layout ansi blocker
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/keymap.c new file mode 100644 index 0000000000..b2019e5ec8 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [0] = LAYOUT_65_ansi_blocker_split_bs_sp( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_65_ansi_blocker_split_bs_sp( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/readme.md new file mode 100644 index 0000000000..b6d1da89aa --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/readme.md @@ -0,0 +1 @@ +# The keymap for krush65 solder layout ansi blocker with split backspace and split spacebar
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c new file mode 100644 index 0000000000..6cd8dd4baf --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c @@ -0,0 +1,39 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + + [0] = LAYOUT_65_ansi_blocker_split_bs( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_65_ansi_blocker_split_bs( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md new file mode 100644 index 0000000000..162da7a903 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md @@ -0,0 +1 @@ +# The keymap for krush65 solder layout ansi blocker with split backspace
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..eecb1e5f8f --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; + diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..1f98b857ce --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for krush65 solder
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c new file mode 100644 index 0000000000..3a7fa10cfa --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c @@ -0,0 +1,75 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + switch (get_highest_layer(layer_state)) { + case 0: + // main layer - move mouse right (CW) and left (CCW) + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + break; + default: + // other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW) + if (clockwise) { + tap_code16(C(KC_EQL)); + } else { + tap_code16(C(KC_MINS)); + } + break; + } + } + return false; +}
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md new file mode 100644 index 0000000000..ff710c521f --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md @@ -0,0 +1 @@ +#custom keymap for MikeTheSan
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..8036529c91 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md new file mode 100644 index 0000000000..2c88050060 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA keymap for krush65 solder
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/readme.md new file mode 100644 index 0000000000..27af715eda --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/readme.md @@ -0,0 +1,15 @@ +# Krush65 solder + + + +A 65% keyboard PCB made and sold by SawnsProjects with Nuxros in [mechkey.store](https://mechkey.store/blogs/store-updates/introducing-krush-65). + +* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) +* Hardware Supported: Krush65 +* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1410794482649627) + +Make example for this keyboard (after setting up your build environment): + + make sawnsprojects/krush65/solder:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/rules.mk new file mode 100644 index 0000000000..1adb996504 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +ENCODER_ENABLE = yes + +LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/solder.c b/keyboards/sawnsprojects/krush/krush65/solder/solder.c new file mode 100644 index 0000000000..b8a7729725 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/solder.c @@ -0,0 +1,53 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "solder.h" +#include "encoder_actions.h" + + /* Custom encoder control - handles CW/CCW turning of encoder + * Default behavior: + * main layer: + * CW: move mouse right + * CCW: move mouse left + * other layers: + * CW: = (equals/plus - increase slider in Adobe products) + * CCW: - (minus/underscore - decrease slider in adobe products) + */ +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + switch (get_highest_layer(layer_state)) { + + case 0: + // main layer - move mouse right (CW) and left (CCW) + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + break; + default: + // other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW) + if (clockwise) { + tap_code16(C(KC_EQL)); + } else { + tap_code16(C(KC_MINS)); + } + break; + } + } + return true; +}
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/solder.h b/keyboards/sawnsprojects/krush/krush65/solder/solder.h new file mode 100644 index 0000000000..58f6bed57b --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/solder.h @@ -0,0 +1,93 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ + { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ + { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ + { K80, K81, K82, KC_NO, KC_NO, K85, KC_NO, K87 }, \ + { K90, KC_NO, K92, K93, K94, K95, KC_NO, K97 }, \ +} +#define LAYOUT_65_ansi_blocker( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K92, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ + { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ + { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ + { K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87 }, \ + { K90, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97 }, \ +} +#define LAYOUT_65_ansi_blocker_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K92, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ + { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ + { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ + { K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87 }, \ + { K90, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97 }, \ +} +#define LAYOUT_65_ansi_blocker_split_bs_sp( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ + { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ + { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ + { K80, K81, K82, KC_NO, KC_NO, K85, KC_NO, K87 }, \ + { K90, KC_NO, K92, K93, K94, K95, KC_NO, K97 }, \ +} + |