diff options
Diffstat (limited to 'keyboards/splitkb/kyria/keymaps/taamas2/config.h')
| -rw-r--r-- | keyboards/splitkb/kyria/keymaps/taamas2/config.h | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/keyboards/splitkb/kyria/keymaps/taamas2/config.h b/keyboards/splitkb/kyria/keymaps/taamas2/config.h new file mode 100644 index 0000000000..c8afcd859d --- /dev/null +++ b/keyboards/splitkb/kyria/keymaps/taamas2/config.h @@ -0,0 +1,134 @@ +/* +Copyright 2022 Thomas Baart <thomas@splitkb.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x8D1D +#define PRODUCT_ID 0x9D9D +#define DEVICE_VER 0x0002 +#define MANUFACTURER splitkb +#define PRODUCT Kyria rev2 + +/* key matrix size */ +/* Rows are doubled up */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +// wiring +#define MATRIX_ROW_PINS \ + { F6, F7, B1, B3 } +#define MATRIX_COL_PINS \ + { B2, B6, B5, B4, E6, D7, C6, D4 } +#define MATRIX_ROW_PINS_RIGHT \ + { D4, C6, D7, E6 } +#define MATRIX_COL_PINS_RIGHT \ + { B4, B5, B6, B2, B3, B1, F7, F6 } +#define UNUSED_PINS + +#define ENCODERS_PAD_A \ + { F4 } +#define ENCODERS_PAD_B \ + { F5 } +#define ENCODERS_PAD_A_RIGHT \ + { F5 } +#define ENCODERS_PAD_B_RIGHT \ + { F4 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +// Side detection +// col 4 row 3 on right-hand-side +#define SPLIT_HAND_MATRIX_GRID E6, B3 // row first because the board is col2row +#define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT +#define MATRIX_MASKED // actual mask is defined by `matrix_mask` in `rev2.c` + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ + +#if defined(CONVERT_TO_PROTON_C) +# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +# define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve. +# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1 +# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +# define SERIAL_USART_TX_PIN D3 +# define SERIAL_USART_RX_PIN D2 + +# define RGB_DI_PIN PAL_LINE(GPIOA, 3) +# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 +# define WS2812_PWM_CHANNEL 4 // default: 2 +# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU. +#else +# define RGB_DI_PIN D3 +# define SOFT_SERIAL_PIN D2 +#endif + +#define RGBLED_SPLIT \ + { 10, 10 } +#define RGBLED_NUM 20 + +#ifdef OLED_ENABLE +# define OLED_DISPLAY_128X64 +# define SPLIT_OLED_ENABLE +#endif + +/* RGB matrix support */ +#ifdef RGB_MATRIX_ENABLE +# define SPLIT_TRANSPORT_MIRROR +# define DRIVER_LED_TOTAL RGBLED_NUM // Number of LEDs +# define RGB_MATRIX_SPLIT { 10, 10 } +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170 +# define RGB_DISABLE_WHEN_USB_SUSPENDED +#endif + +// Old personal stuff from first keyboard here + +// Lets you roll mod-tap keys +// Which is something I don't want: a +// quick Alt+a don't work if this is defined +//#define IGNORE_MOD_TAP_INTERRUPT + +#ifdef RGBLIGHT_ENABLE + #define RGBLIGHT_ANIMATIONS + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 150 +#endif + +// Mouse settings +#define MOUSEKEY_DELAY 100 +#define MOUSEKEY_INTERVAL 50 +#define MOUSEKEY_MAX_SPEED 20 +#define MOUSEKEY_TIME_TO_MAX 20 + +#define ENCODER_RESOLUTION 2 + +// If you are using an Elite C rev3 on the slave side, uncomment the lines below: +// #define SPLIT_USB_DETECT +// #define NO_USB_STARTUP_CHECK |