diff options
Diffstat (limited to 'keyboards/tronguylabs/m122_3270/keymaps/default/readme.md')
| -rw-r--r-- | keyboards/tronguylabs/m122_3270/keymaps/default/readme.md | 29 |
1 files changed, 20 insertions, 9 deletions
diff --git a/keyboards/tronguylabs/m122_3270/keymaps/default/readme.md b/keyboards/tronguylabs/m122_3270/keymaps/default/readme.md index 3b59718ed8..cab833dd30 100644 --- a/keyboards/tronguylabs/m122_3270/keymaps/default/readme.md +++ b/keyboards/tronguylabs/m122_3270/keymaps/default/readme.md @@ -1,16 +1,17 @@ # Default keymap for m122-3270 This keymap is intended to make the PC/3270 122-key IBM keyboard work as closely as possible to the standard -PC/3270 keyboard's original mapping. Two layers are defined: layer 0 is the PC layout, using the blue legends -on the PC/3270 keys (as shipped by Unicomp; I don't have the original keycaps, and I know there are a few -differences), while layer 1 is the 3270 layout, with keycodes selected to make the x3270 suite do the right -thing with each key as pressed. The idea here is, eventually, to get x3270 and friends to automatically -shift the keyboard to layer 1 when they gain focus. +PC/3270 keyboard's (part number 1397000) original mapping. Two layers are defined: layer 0 is the PC layout, +using the blue legends on the PC/3270 keys (as shipped by Unicomp; I don't have the original keycaps, and I +know there are a few differences), while layer 1 is the 3270 layout, with keycodes selected to make the `x3270` +suite do the right thing with each key as pressed. The idea here is, eventually, to get `x3270` to +automatically shift the keyboard to layer 1 when it gains focus. -When layer 0 is active, the PA1 key is Escape, the Reset and Enter keys are Control, and the comma and dot keys -act like normal PC keys (< and >, repectively, when shifted). The Ctrl key (bottom right of the left-side 10-key -cluster) is always the left GUI key. PA2 and Jump/PA3 are PgUp and PgDn, respectively, and the backtab key is -End. The Rule/Home key is Home. +When layer 0 is active, the upper left key of the 10-key pad is Escape, the Reset and Enter keys are Control, and +the comma and dot keys act like normal PC keys (< and >, repectively, when shifted). The Ctrl key (bottom right +of the left-side 10-key cluster) is always the left GUI key. PA2 and Jump/PA3 are PgUp and PgDn, respectively, +and the backtab key is End. The Rule/Home key is Home. The key next to the Escape key is Scroll Lock when unshifted, +and Num Lock when shifted. When layer 1 is active, the keys do their labeled functions. The only keys that don't do anything are CrSel, ExSel, and Jump, though only a few of the alternate functions (on the front of the keys) work: left/right/delete @@ -22,3 +23,13 @@ To manually switch to layer 1, hold the Zoom key (the one on the far lower left Attn (the one at the top left of that block of 10). Holding the Zoom key and the spacebar gets you to keys that control QMK itself: Zoom-space-R resets to the bootloader, Zoom-space-E erases the EEPROM (which currently does nothing), and Zoom-space-D turns the debugger on and off. + +Note that you need to set your Linux system to use the Scroll Lock key as the Compose key in order to get the +cent sign to register as intended, and add the following lines to a file in your home directory named `.x3270pro` +to make Dup and Field Mark work: +``` +x3270.keymap.m122: #override \ + Ctrl<Key>F: FieldMark()\n\ + Ctrl<Key>D: Dup() +``` +You need to then invoke `x3270` with the parameter `-keymap m122` to activate those definitions. |