diff options
Diffstat (limited to 'keyboards/xiudi/xd84/dev.md')
| -rw-r--r-- | keyboards/xiudi/xd84/dev.md | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/keyboards/xiudi/xd84/dev.md b/keyboards/xiudi/xd84/dev.md new file mode 100644 index 0000000000..536b01d06b --- /dev/null +++ b/keyboards/xiudi/xd84/dev.md @@ -0,0 +1,136 @@ +# XD84 + +Development docs covering the following: +- Kimera core +- RGB +- Backlight +- Light Through Cat + +## Kimera core + + +What little available info that was available for the qmk port +- atmega32u4 16Mhz + - board seems to have a 6Mhz crystal +- 2x PCA9555 I2C IO expander + +Links: +- [Schematic, BOM, Gerbers](/kairyu/kimera/blob/master/kimera_core) +- [Original firmware](https://github.com/kairyu/tmk_keyboard_custom/tree/master/keyboard/kimera) + +```c +/* +Kimera_core_v1.0 Components + + U1 (atmega32u4) + ,----------------. + TX --| TX0(PD3) RAW |-- + RX --| RX1(PD2) GND |-- + --| GND RESET |-- RST + --| GND VCC |-- + SDA --| 2(PD1) (PF4)A3 |-- + SCL --| 3(PD0) (PF5)A2 |-- + (INT) --| 4(PD4) (PF6)A1 |-- + --| 5(PC6) (PF7)A0 |-- + --| 6(PD7) (PB1)15 |-- SCK + LED2 --| 7(PE6) (PB3)14 |-- MISO + LED1 --| 8(PB4) (PB2)16 |-- MOSI + LED3 --| 9(PB5) (PB6)10 |-- LED4 + `----------------' + + IC1 (PCA9555) IC2 (PCA9555) + ,----------. ,----------. + SDA --| SDA P00 |-- P1 SDA --| SDA P00 |-- P17 + SCL --| SCL P01 |-- P2 SCL --| SCL P01 |-- P18 + INT --| INT P02 |-- P3 INT --| INT P02 |-- P19 + | P03 |-- P4 | P03 |-- P20 + GND --| A0 P04 |-- P5 VCC --| A0 P04 |-- P21 + SJ1 --| A1 P05 |-- P6 SJ1 --| A1 P05 |-- P22 + SJ2 --| A2 P06 |-- P7 SJ2 --| A2 P06 |-- P23 + | P07 |-- P8 | P07 |-- P24 + | | | | + | P10 |-- P9 | P10 |-- P25 + | P11 |-- P10 | P11 |-- P26 + | P12 |-- P11 | P12 |-- P27 + | P13 |-- P12 | P13 |-- P28 + | P14 |-- P13 | P14 |-- P29 + | P15 |-- P14 | P15 |-- P30 + | P16 |-- P15 | P16 |-- P31 + | P17 |-- P16 | P17 |-- P32 + `----------' `----------' +*/ + +``` + +### Bootloader +Default bootloader is `atmel-dfu`. +Reboot to bootloader via magnetic switch next to icsp header. +Flash using regular dfu methods. + +### XD84 pin mappings +Taken from [kimera-config.json](https://github.com/kairyu/tkg/blob/master/keyboard/config/kimera-config.json) + + "row_mapping": [ 1, 2, 3, 4, 5, 6 ], + "col_mapping": [ 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 ], + +# RGB +- PIN C7 +- Number of RGB LED 7 + +# Backlight +- PIN B6 + +# Light Through Cat + TODO - PWM C6 + +## Assumptions +### Pin/Port mappings +- All cols are on the same IC +- All rows are on the same IC and port +- Pins mapped sequentially +- Each port only does row or column not a mixture of both + - No need to have complex port config + - + +| ROW index | Kimera Pin | PCA9555 | +| ----------|------------|-------------------| +| 0 | 1 | IC1 Port 0 pin 0 | +| 1 | 2 | IC1 Port 0 pin 1 | +| 2 | 3 | IC1 Port 0 pin 2 | +| 3 | 4 | IC1 Port 0 pin 3 | +| 4 | 5 | IC1 Port 0 pin 4 | +| 5 | 6 | IC1 Port 0 pin 5 | + +- Safe enough to assume `row_index == pin` + + +| COL index | Kimera Pin | PCA9555 | +| ----------|------------|-------------------| +| 0 | 17 | IC2 Port 0 pin 0 | +| 1 | 18 | IC2 Port 0 pin 1 | +| 2 | 19 | IC2 Port 0 pin 2 | +| 3 | 20 | IC2 Port 0 pin 3 | +| 4 | 21 | IC2 Port 0 pin 4 | +| 5 | 22 | IC2 Port 0 pin 5 | +| 6 | 23 | IC2 Port 0 pin 6 | +| 7 | 24 | IC2 Port 0 pin 7 | +| 8 | 25 | IC2 Port 1 pin 0 | +| 9 | 26 | IC2 Port 1 pin 1 | +| 10 | 27 | IC2 Port 1 pin 2 | +| 11 | 28 | IC2 Port 1 pin 3 | +| 12 | 29 | IC2 Port 1 pin 4 | +| 13 | 30 | IC2 Port 1 pin 5 | +| 14 | 31 | IC2 Port 1 pin 6 | + +- Safe enough to assume here col_index does not need to be converted to pin +- Reading both ports one after the other gives us the same sequential behavior + - maps to the usual practice of reading matrix columns + - while this technically gives 16 column reads, the 16th column can never be set so is safely ignored + +## Notes +[pca9555 datasheet](https://www.ti.com/lit/ds/symlink/pca9555.pdf) + +- Other Kimera based boards with non sequential pin mappings, pins mapped across ICs, or mixed row/col configs will need more complicated `pin -> i2c_addr,port,pin` logic as well as rather more complex pin functions. + +## Return to stock firmware +Not tested but original firmware seems to be available in the [kairyu/tkg-firmware](https://github.com/kairyu/tkg-firmware/blob/master/kimera-core.hex) repo. |