summaryrefslogtreecommitdiff
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/e6v2/e6v2.c54
-rw-r--r--keyboards/e6v2/e6v2.h66
-rw-r--r--keyboards/e6v2/keymaps/amnesia0287/config.h1
-rw-r--r--keyboards/e6v2/keymaps/amnesia0287/rules.mk0
-rw-r--r--keyboards/e6v2/keymaps/default/config.h1
-rw-r--r--keyboards/e6v2/keymaps/default/rules.mk0
-rw-r--r--keyboards/e6v2/le/config.h65
-rw-r--r--keyboards/e6v2/le/info.json12
-rw-r--r--keyboards/e6v2/le/le.c53
-rw-r--r--keyboards/e6v2/le/le.h19
-rw-r--r--keyboards/e6v2/le/readme.md17
-rw-r--r--keyboards/e6v2/le/rules.mk68
-rw-r--r--keyboards/e6v2/oe/config.h (renamed from keyboards/e6v2/config.h)0
-rw-r--r--keyboards/e6v2/oe/info.json (renamed from keyboards/e6v2/info.json)2
-rw-r--r--keyboards/e6v2/oe/keymaps/amnesia0287/keymap.c (renamed from keyboards/e6v2/keymaps/amnesia0287/keymap.c)0
-rw-r--r--keyboards/e6v2/oe/keymaps/amnesia0287/readme.md (renamed from keyboards/e6v2/keymaps/amnesia0287/readme.md)0
-rw-r--r--keyboards/e6v2/oe/keymaps/default/keymap.c (renamed from keyboards/e6v2/keymaps/default/keymap.c)0
-rw-r--r--keyboards/e6v2/oe/keymaps/default/readme.md (renamed from keyboards/e6v2/keymaps/default/readme.md)0
-rw-r--r--keyboards/e6v2/oe/oe.c53
-rw-r--r--keyboards/e6v2/oe/oe.h66
-rw-r--r--keyboards/e6v2/oe/readme.md17
-rw-r--r--keyboards/e6v2/oe/rules.mk70
-rw-r--r--keyboards/e6v2/readme.md15
-rw-r--r--keyboards/e6v2/rules.mk71
24 files changed, 453 insertions, 197 deletions
diff --git a/keyboards/e6v2/e6v2.c b/keyboards/e6v2/e6v2.c
index 917f3e07b6..e7d5fe9e36 100644
--- a/keyboards/e6v2/e6v2.c
+++ b/keyboards/e6v2/e6v2.c
@@ -1,53 +1 @@
-#include "e6v2.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
- DDRB |= (1<<6);
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- // output low
- DDRB |= (1<<2);
- PORTB &= ~(1<<2);
- } else {
- // Hi-Z
- DDRB &= ~(1<<2);
- PORTB &= ~(1<<2);
- }
- // DDRB |= (1<<7);
- // DDRB |= (1<<1);
- // DDRB |= (1<<3);
- // DDRE |= (1<<6);
- if (usb_led == 0){
- PORTB |= (1<<6);
- // PORTB |= (1<<7);
- // PORTB |= (1<<1);
- // PORTB |= (1<<3);
- // PORTE |= (1<<6);
- }
- else{
- PORTB &= ~(1<<6);
- // PORTB &= ~(1<<7);
- }
-
- led_set_user(usb_led);
-}
+#include "e6v2.h" \ No newline at end of file
diff --git a/keyboards/e6v2/e6v2.h b/keyboards/e6v2/e6v2.h
index 6416b4bd5f..5190a3e826 100644
--- a/keyboards/e6v2/e6v2.h
+++ b/keyboards/e6v2/e6v2.h
@@ -3,64 +3,12 @@
#include "quantum.h"
-#define LAYOUT( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
- K40, K41, K42, K46, K4A, K4B, K4C, K4D \
-)\
-{\
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \
- { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \
-}
-
-#define LAYOUT_60_ansi( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
- K40, K41, K42, K46, K4A, K4B, K4C, K4D \
-)\
-{\
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \
- { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, KC_NO }, \
- { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \
-}
-
-#define LAYOUT_hhkb( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
- K41, K42, K46, K4B, K4C \
-)\
-{\
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \
- { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \
- { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \
-}
-
-#define LAYOUT_hhkb_splits( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
- K41, K42, K46, K4B, K4C \
-)\
-{\
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \
- { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \
-}
+#ifdef KEYBOARD_e6v2_oe
+ #include "oe.h"
+#endif
+#ifdef KEYBOARD_e6v2_le
+ #include "le.h"
#endif
+
+#endif \ No newline at end of file
diff --git a/keyboards/e6v2/keymaps/amnesia0287/config.h b/keyboards/e6v2/keymaps/amnesia0287/config.h
deleted file mode 100644
index a5568e400d..0000000000
--- a/keyboards/e6v2/keymaps/amnesia0287/config.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../config.h"
diff --git a/keyboards/e6v2/keymaps/amnesia0287/rules.mk b/keyboards/e6v2/keymaps/amnesia0287/rules.mk
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/e6v2/keymaps/amnesia0287/rules.mk
+++ /dev/null
diff --git a/keyboards/e6v2/keymaps/default/config.h b/keyboards/e6v2/keymaps/default/config.h
deleted file mode 100644
index a5568e400d..0000000000
--- a/keyboards/e6v2/keymaps/default/config.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../config.h"
diff --git a/keyboards/e6v2/keymaps/default/rules.mk b/keyboards/e6v2/keymaps/default/rules.mk
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/e6v2/keymaps/default/rules.mk
+++ /dev/null
diff --git a/keyboards/e6v2/le/config.h b/keyboards/e6v2/le/config.h
new file mode 100644
index 0000000000..e155451503
--- /dev/null
+++ b/keyboards/e6v2/le/config.h
@@ -0,0 +1,65 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0002
+#define MANUFACTURER Exclusive / E-Team
+#define PRODUCT E6-V2 LE
+#define DESCRIPTION E6-V2 LE QMK PCB (Mid-Port)
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* QMK E6-V2 PCB default pin-out */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 }
+#define MATRIX_COL_PINS { B5, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7 }
+#define UNUSED_PINS
+
+#define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 12
+#define RGBLIGHT_SAT_STEP 12
+#define RGBLIGHT_VAL_STEP 12
+#endif
+
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 2
+#define BACKLIGHT_BREAHTING
+#define BREATHING_PERIOD 3
+#endif
+
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCING_DELAY 5
+
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+ )
+
+
+
+#endif
diff --git a/keyboards/e6v2/le/info.json b/keyboards/e6v2/le/info.json
new file mode 100644
index 0000000000..9f9251282b
--- /dev/null
+++ b/keyboards/e6v2/le/info.json
@@ -0,0 +1,12 @@
+{
+ "keyboard_name": "E6-V2 LE",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 15,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.75}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.25}, {"label":"Win", "x":3, "y":4, "w":1.25}, {"label":"Alt", "x":4.25, "y":4, "w":1.25}, {"x":5.5, "y":4, "w":2.75}, {"x":8.25, "y":4, "w":1.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
+ }
+ }
+} \ No newline at end of file
diff --git a/keyboards/e6v2/le/le.c b/keyboards/e6v2/le/le.c
new file mode 100644
index 0000000000..9083352d40
--- /dev/null
+++ b/keyboards/e6v2/le/le.c
@@ -0,0 +1,53 @@
+#include "le.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ DDRB |= (1<<6);
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // output low
+ DDRB |= (1<<2);
+ PORTB &= ~(1<<2);
+ } else {
+ // Hi-Z
+ DDRB &= ~(1<<2);
+ PORTB &= ~(1<<2);
+ }
+ // DDRB |= (1<<7);
+ // DDRB |= (1<<1);
+ // DDRB |= (1<<3);
+ // DDRE |= (1<<6);
+ if (usb_led == 0){
+ PORTB |= (1<<6);
+ // PORTB |= (1<<7);
+ // PORTB |= (1<<1);
+ // PORTB |= (1<<3);
+ // PORTE |= (1<<6);
+ }
+ else{
+ PORTB &= ~(1<<6);
+ // PORTB &= ~(1<<7);
+ }
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/e6v2/le/le.h b/keyboards/e6v2/le/le.h
new file mode 100644
index 0000000000..197b9335cb
--- /dev/null
+++ b/keyboards/e6v2/le/le.h
@@ -0,0 +1,19 @@
+#ifndef LE_H
+#define LE_H
+
+#include "../e6v2.h"
+
+#define LAYOUT( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+ K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+ K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K42, K43, K44, K47, K49, K4A, K4B, K4C, K4D, K4E \
+)\
+{\
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+ { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, KC_NO, K42, K43, K44, KC_NO, KC_NO, K47, KC_NO, K49, K4A, K4B, K4C, K4D, K4E }, \
+} \ No newline at end of file
diff --git a/keyboards/e6v2/le/readme.md b/keyboards/e6v2/le/readme.md
new file mode 100644
index 0000000000..33a8647719
--- /dev/null
+++ b/keyboards/e6v2/le/readme.md
@@ -0,0 +1,17 @@
+# E6-V2 Last Edition (LE)
+
+These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/)
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+Hardware Supported: E6-V2 LE Mid Port rev.qmk
+Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make e6v2/le:default
+
+Or to make and flash:
+
+ make e6v2/le:default:dfu
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file
diff --git a/keyboards/e6v2/le/rules.mk b/keyboards/e6v2/le/rules.mk
new file mode 100644
index 0000000000..c2c02b6147
--- /dev/null
+++ b/keyboards/e6v2/le/rules.mk
@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no # MIDI controls
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
diff --git a/keyboards/e6v2/config.h b/keyboards/e6v2/oe/config.h
index b80afcb51a..b80afcb51a 100644
--- a/keyboards/e6v2/config.h
+++ b/keyboards/e6v2/oe/config.h
diff --git a/keyboards/e6v2/info.json b/keyboards/e6v2/oe/info.json
index 1cac56f7e7..7c14017274 100644
--- a/keyboards/e6v2/info.json
+++ b/keyboards/e6v2/oe/info.json
@@ -1,5 +1,5 @@
{
- "keyboard_name": "E6-V2",
+ "keyboard_name": "E6-V2 OE",
"url": "",
"maintainer": "qmk",
"width": 15,
diff --git a/keyboards/e6v2/keymaps/amnesia0287/keymap.c b/keyboards/e6v2/oe/keymaps/amnesia0287/keymap.c
index 7e64b1212e..7e64b1212e 100644
--- a/keyboards/e6v2/keymaps/amnesia0287/keymap.c
+++ b/keyboards/e6v2/oe/keymaps/amnesia0287/keymap.c
diff --git a/keyboards/e6v2/keymaps/amnesia0287/readme.md b/keyboards/e6v2/oe/keymaps/amnesia0287/readme.md
index 4cc97aef04..4cc97aef04 100644
--- a/keyboards/e6v2/keymaps/amnesia0287/readme.md
+++ b/keyboards/e6v2/oe/keymaps/amnesia0287/readme.md
diff --git a/keyboards/e6v2/keymaps/default/keymap.c b/keyboards/e6v2/oe/keymaps/default/keymap.c
index 945787f0dc..945787f0dc 100644
--- a/keyboards/e6v2/keymaps/default/keymap.c
+++ b/keyboards/e6v2/oe/keymaps/default/keymap.c
diff --git a/keyboards/e6v2/keymaps/default/readme.md b/keyboards/e6v2/oe/keymaps/default/readme.md
index e726473646..e726473646 100644
--- a/keyboards/e6v2/keymaps/default/readme.md
+++ b/keyboards/e6v2/oe/keymaps/default/readme.md
diff --git a/keyboards/e6v2/oe/oe.c b/keyboards/e6v2/oe/oe.c
new file mode 100644
index 0000000000..10cd59f0c2
--- /dev/null
+++ b/keyboards/e6v2/oe/oe.c
@@ -0,0 +1,53 @@
+#include "oe.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ DDRB |= (1<<6);
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // output low
+ DDRB |= (1<<2);
+ PORTB &= ~(1<<2);
+ } else {
+ // Hi-Z
+ DDRB &= ~(1<<2);
+ PORTB &= ~(1<<2);
+ }
+ // DDRB |= (1<<7);
+ // DDRB |= (1<<1);
+ // DDRB |= (1<<3);
+ // DDRE |= (1<<6);
+ if (usb_led == 0){
+ PORTB |= (1<<6);
+ // PORTB |= (1<<7);
+ // PORTB |= (1<<1);
+ // PORTB |= (1<<3);
+ // PORTE |= (1<<6);
+ }
+ else{
+ PORTB &= ~(1<<6);
+ // PORTB &= ~(1<<7);
+ }
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/e6v2/oe/oe.h b/keyboards/e6v2/oe/oe.h
new file mode 100644
index 0000000000..2cfecb0be1
--- /dev/null
+++ b/keyboards/e6v2/oe/oe.h
@@ -0,0 +1,66 @@
+#ifndef OE_H
+#define OE_H
+
+#include "../e6v2.h"
+
+#define LAYOUT( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+)\
+{\
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \
+ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \
+}
+
+#define LAYOUT_60_ansi( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+)\
+{\
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \
+ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, KC_NO }, \
+ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \
+}
+
+#define LAYOUT_hhkb( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K41, K42, K46, K4B, K4C \
+)\
+{\
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \
+ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \
+ { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \
+}
+
+#define LAYOUT_hhkb_splits( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K41, K42, K46, K4B, K4C \
+)\
+{\
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \
+ { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \
+}
+
+#endif
diff --git a/keyboards/e6v2/oe/readme.md b/keyboards/e6v2/oe/readme.md
new file mode 100644
index 0000000000..b9b42bd5f0
--- /dev/null
+++ b/keyboards/e6v2/oe/readme.md
@@ -0,0 +1,17 @@
+# E6-V2 Original Edition (OE)
+
+These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/)
+
+Keyboard Maintainer: [amnesia0287](https://github.com/amnesia0287)
+Hardware Supported: E6-V2 OE Mid Port rev.qmk
+Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make e6v2/oe:default
+
+Or to make and flash:
+
+ make e6v2/oe:default:dfu
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file
diff --git a/keyboards/e6v2/oe/rules.mk b/keyboards/e6v2/oe/rules.mk
new file mode 100644
index 0000000000..7d28042d85
--- /dev/null
+++ b/keyboards/e6v2/oe/rules.mk
@@ -0,0 +1,70 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no # MIDI controls
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+
+LAYOUTS = 60_ansi \ No newline at end of file
diff --git a/keyboards/e6v2/readme.md b/keyboards/e6v2/readme.md
index 5fd9668f59..4ac498fc41 100644
--- a/keyboards/e6v2/readme.md
+++ b/keyboards/e6v2/readme.md
@@ -1,18 +1,9 @@
-E6-V2
-===
+# E6-V2
These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/)
-Keyboard Maintainer: [amnesia0287](https://github.com/amnesia0287)
-Hardware Supported: E6-V2 Mid Port rev.qmk
-Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0)
+The E6V2 has been available with either a bootmapper client or QMK powered PCB. During the second round, the QMK powered PCB was redesigned and used different ports and a different switch matrix.
-Make example for this keyboard (after setting up your build environment):
-
- make e6v2:default
-
-Or to make and flash:
-
- make e6v2:default:dfu
+Please use the appropriate version when making your firmware.
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/e6v2/rules.mk b/keyboards/e6v2/rules.mk
index 7d28042d85..0909ba2ce4 100644
--- a/keyboards/e6v2/rules.mk
+++ b/keyboards/e6v2/rules.mk
@@ -1,70 +1 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = yes
-MIDI_ENABLE = no # MIDI controls
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-
-LAYOUTS = 60_ansi \ No newline at end of file
+DEFAULT_FOLDER = e6v2/oe \ No newline at end of file