diff options
Diffstat (limited to 'keyboards')
67 files changed, 345 insertions, 1158 deletions
diff --git a/keyboards/40percentclub/ut47/matrix.c b/keyboards/40percentclub/ut47/matrix.c index e47c7f8e13..c1284535bc 100644 --- a/keyboards/40percentclub/ut47/matrix.c +++ b/keyboards/40percentclub/ut47/matrix.c @@ -104,12 +104,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/ai03/orbit/matrix.c b/keyboards/ai03/orbit/matrix.c index b8e3296686..024233524c 100644 --- a/keyboards/ai03/orbit/matrix.c +++ b/keyboards/ai03/orbit/matrix.c @@ -83,11 +83,6 @@ inline uint8_t matrix_rows(void) { return MATRIX_ROWS; } inline uint8_t matrix_cols(void) { return MATRIX_COLS; } -bool matrix_is_modified(void) { - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } diff --git a/keyboards/amj96/matrix.c b/keyboards/amj96/matrix.c index 8e7bbaa791..ffd66d120f 100644 --- a/keyboards/amj96/matrix.c +++ b/keyboards/amj96/matrix.c @@ -108,12 +108,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/angel64/alpha/matrix.c b/keyboards/angel64/alpha/matrix.c index 474fbec030..2851859cf2 100644 --- a/keyboards/angel64/alpha/matrix.c +++ b/keyboards/angel64/alpha/matrix.c @@ -90,13 +90,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/angel64/rev1/matrix.c b/keyboards/angel64/rev1/matrix.c index 474fbec030..2851859cf2 100644 --- a/keyboards/angel64/rev1/matrix.c +++ b/keyboards/angel64/rev1/matrix.c @@ -90,13 +90,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/bpiphany/kitten_paw/matrix.c b/keyboards/bpiphany/kitten_paw/matrix.c index b59089cdf4..56114858f1 100644 --- a/keyboards/bpiphany/kitten_paw/matrix.c +++ b/keyboards/bpiphany/kitten_paw/matrix.c @@ -117,13 +117,6 @@ uint8_t matrix_scan(void) { return 1; } -bool matrix_is_modified(void) { - if (debouncing) - return false; - else - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1<<col)); } diff --git a/keyboards/bpiphany/pegasushoof/2013/matrix.c b/keyboards/bpiphany/pegasushoof/2013/matrix.c index 037f323c00..09244982d9 100644 --- a/keyboards/bpiphany/pegasushoof/2013/matrix.c +++ b/keyboards/bpiphany/pegasushoof/2013/matrix.c @@ -110,13 +110,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) - return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/converter/palm_usb/matrix.c b/keyboards/converter/palm_usb/matrix.c index 289284b616..5cb3c23572 100644 --- a/keyboards/converter/palm_usb/matrix.c +++ b/keyboards/converter/palm_usb/matrix.c @@ -58,8 +58,6 @@ static uint16_t disconnect_counter = 0; #define COL(code) ((code & COL_MASK) ) #define KEYUP(code) ((code & KEY_MASK) >>7 ) -static bool is_modified = false; - __attribute__ ((weak)) void matrix_init_kb(void) { matrix_init_user(); @@ -354,11 +352,6 @@ uint8_t matrix_scan(void) return code; } -bool matrix_is_modified(void) -{ - return is_modified; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/converter/sun_usb/matrix.c b/keyboards/converter/sun_usb/matrix.c index 21f45111ec..9ab34bcef7 100644 --- a/keyboards/converter/sun_usb/matrix.c +++ b/keyboards/converter/sun_usb/matrix.c @@ -38,8 +38,6 @@ static uint8_t matrix[MATRIX_ROWS]; #define ROW(code) ((code>>3)&0xF) #define COL(code) (code&0x07) -static bool is_modified = false; - __attribute__ ((weak)) void matrix_init_kb(void) { matrix_init_user(); @@ -154,11 +152,6 @@ uint8_t matrix_scan(void) return code; } -bool matrix_is_modified(void) -{ - return is_modified; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/converter/usb_usb/custom_matrix.cpp b/keyboards/converter/usb_usb/custom_matrix.cpp index 296f7fcd02..91986f6eb9 100644 --- a/keyboards/converter/usb_usb/custom_matrix.cpp +++ b/keyboards/converter/usb_usb/custom_matrix.cpp @@ -192,10 +192,6 @@ extern "C" return 1; } - bool matrix_is_modified(void) { - return matrix_is_mod; - } - bool matrix_is_on(uint8_t row, uint8_t col) { uint8_t code = CODE(row, col); diff --git a/keyboards/dc01/arrow/matrix.c b/keyboards/dc01/arrow/matrix.c index 0102ad0fa4..b69e147914 100644 --- a/keyboards/dc01/arrow/matrix.c +++ b/keyboards/dc01/arrow/matrix.c @@ -205,14 +205,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c index bf5aba8497..084978a1fd 100644 --- a/keyboards/dc01/left/matrix.c +++ b/keyboards/dc01/left/matrix.c @@ -230,14 +230,6 @@ if (i2c_transaction(SLAVE_I2C_ADDRESS_NUMPAD, 0x1FFFF, 11)) { return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dc01/numpad/matrix.c b/keyboards/dc01/numpad/matrix.c index 38130114eb..e8e2a1b14a 100644 --- a/keyboards/dc01/numpad/matrix.c +++ b/keyboards/dc01/numpad/matrix.c @@ -205,14 +205,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dc01/right/matrix.c b/keyboards/dc01/right/matrix.c index 544c8dc538..2509bd7d4c 100644 --- a/keyboards/dc01/right/matrix.c +++ b/keyboards/dc01/right/matrix.c @@ -206,14 +206,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dm9records/ergoinu/config.h b/keyboards/dm9records/ergoinu/config.h index 113eaf9f76..89ea9e7903 100644 --- a/keyboards/dm9records/ergoinu/config.h +++ b/keyboards/dm9records/ergoinu/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #include "config_common.h" -#include "serial_config.h" /* USB Device descriptor parameter VID & PID are lisenced from microchip sublisence program, Don't use other project! */ @@ -30,11 +29,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MANUFACTURER Dm9Records #define PRODUCT ergoinu -#define TAPPING_FORCE_HOLD -#define TAPPING_TERM 100 - #define USE_SERIAL +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D2 + /* Select hand configuration */ #define MASTER_LEFT // #define MASTER_RIGHT @@ -49,6 +48,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COLS 7 #define MATRIX_COL_PINS { B4, E6, D7, C6, D4, F5, F4 } +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dm9records/ergoinu/ergoinu.c b/keyboards/dm9records/ergoinu/ergoinu.c index c6d099a148..a01ac0a25c 100644 --- a/keyboards/dm9records/ergoinu/ergoinu.c +++ b/keyboards/dm9records/ergoinu/ergoinu.c @@ -1 +1,18 @@ +/* +Copyright 2018 Takuya Urakawa<twitter:@hsgw> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #include "ergoinu.h" diff --git a/keyboards/dm9records/ergoinu/ergoinu.h b/keyboards/dm9records/ergoinu/ergoinu.h index 43249a8440..c275d3fa27 100644 --- a/keyboards/dm9records/ergoinu/ergoinu.h +++ b/keyboards/dm9records/ergoinu/ergoinu.h @@ -19,10 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "quantum.h" -#ifdef RGBLIGHT_ENABLE -#include "ws2812.h" -#endif - #define LAYOUT( \ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ L07, L08, L09, L10, L11, L12, L13, R07, R08, R09, R10, R11, R12, R13, \ @@ -41,4 +37,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. { R27, R26, R25, R24, R23, R22, R21 }, \ { KC_NO, KC_NO, R32, R31, R30, R29, R28 } \ } - diff --git a/keyboards/dm9records/ergoinu/keymaps/default/config.h b/keyboards/dm9records/ergoinu/keymaps/default/config.h deleted file mode 100644 index bb266f25e7..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert -Copyright 2018 Takuya Urakawa <Twitter:@hsgw> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLIGHT_ANIMATIONS diff --git a/keyboards/dm9records/ergoinu/keymaps/default/keymap.c b/keyboards/dm9records/ergoinu/keymaps/default/keymap.c index 3192b0f220..862b538829 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default/keymap.c +++ b/keyboards/dm9records/ergoinu/keymaps/default/keymap.c @@ -5,14 +5,6 @@ extern rgblight_config_t rgblight_config; #endif -#define JA_CLON KC_QUOT // : and + -#define JA_AT KC_LBRC // @ and ` -#define JA_HAT KC_EQL // ^ and ~ -#define JA_ENUN KC_RO // \ and _ (EN mark and UNder score) -#define JA_ENVL KC_JYEN // \ and | (EN mark and Vertical Line) -#define JA_LBRC KC_RBRC // [ and { -#define JA_RBRC KC_BSLS // ] and } - enum LAYER_NO { BASE = 0, META, @@ -24,33 +16,30 @@ enum CUSTOM_KEYCODES { RGB_TYPE, }; -// Fillers to make layering more clear -#define ______ KC_TRNS -#define XXXXXX KC_NO - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [BASE] = LAYOUT( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, \ - KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, \ - MO(META),KC_LALT, KC_LGUI, KC_ENT, KC_SPC, KC_ENT, KC_BSPC, KC_RGUI, KC_RALT, MO(META) \ + [BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, + KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, + MO(META),KC_LALT, KC_LGUI, KC_ENT, KC_SPC, KC_ENT, KC_BSPC, KC_RGUI, KC_RALT, MO(META) ), - [META] = LAYOUT( \ - MO(CONF),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, \ - ______, KC_CAPS, ______, ______, ______, ______, ______, ______, ______, ______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, \ - ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, \ - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_LEFT, KC_DOWN, KC_RGHT, \ - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______ \ + [META] = LAYOUT( + MO(CONF),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, + _______, KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [CONF] = LAYOUT( \ - ______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, \ - RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, \ - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, \ - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, \ - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX \ + + [CONF] = LAYOUT( + _______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ) }; diff --git a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk deleted file mode 100644 index 8741c24d87..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk +++ /dev/null @@ -1,26 +0,0 @@ - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -# ergoinu configs -DISABLE_PROMICRO_LEDs = yes - -# Uncomment these for debugging -# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) -# $(info -- OPT_DEFS=$(OPT_DEFS)) -# $(info ) diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h b/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h deleted file mode 100644 index bb266f25e7..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert -Copyright 2018 Takuya Urakawa <Twitter:@hsgw> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLIGHT_ANIMATIONS diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c b/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c index e161145f4f..32289c44db 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c +++ b/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c @@ -24,34 +24,30 @@ enum CUSTOM_KEYCODES { RGB_TYPE, }; -// Fillers to make layering more clear -#define ______ KC_TRNS -#define XXXXXX KC_NO - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [BASE] = LAYOUT( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JA_HAT, KC_JYEN, \ - KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JA_AT, JA_LBRC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JA_CLON, JA_RBRC, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, \ - MO(META),KC_LALT, KC_ZKHK, KC_BSPC, KC_SPC, KC_ENT, KC_BSPC, KC_MHEN, KC_KANA, MO(META) \ + [BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JA_HAT, KC_JYEN, + KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JA_AT, JA_LBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JA_CLON, JA_RBRC, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, + MO(META),KC_LALT, KC_ZKHK, KC_BSPC, KC_SPC, KC_ENT, KC_BSPC, KC_MHEN, KC_KANA, MO(META) ), - - [META] = LAYOUT( \ - MO(CONF),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, \ - ______, KC_CAPS, ______, KC_UP, ______, ______, ______, ______, ______, ______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, \ - ______, KC_LEFT, KC_DOWN, KC_RGHT, ______, ______, ______, ______, ______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, \ - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_LEFT, KC_DOWN, KC_RGHT, \ - ______, ______, KC_RGUI, KC_DEL, KC_ENT, ______, KC_DEL, KC_HENK, KC_LGUI, ______ \ + [META] = LAYOUT( + MO(CONF),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, + _______, KC_CAPS, _______, KC_UP, _______, _______, _______, _______, _______, _______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, + _______, _______, KC_RGUI, KC_DEL, KC_ENT, _______, KC_DEL, KC_HENK, KC_LGUI, _______ ), - [CONF] = LAYOUT( \ - ______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, \ - RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, \ - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, \ - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, \ - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX \ + + [CONF] = LAYOUT( + _______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ) }; diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk deleted file mode 100644 index 48418de471..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk +++ /dev/null @@ -1,26 +0,0 @@ - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -# ergoinu configs -DISABLE_PROMICRO_LEDs = yes - -# Uncomment these for debugging -# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) -# $(info -- OPT_DEFS=$(OPT_DEFS)) -# $(info ) diff --git a/keyboards/dm9records/ergoinu/matrix.c b/keyboards/dm9records/ergoinu/matrix.c deleted file mode 100644 index b1c58f88fe..0000000000 --- a/keyboards/dm9records/ergoinu/matrix.c +++ /dev/null @@ -1,292 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "quantum.h" - -#include "serial.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; -uint8_t is_master = 0 ; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - - #ifdef DISABLE_PROMICRO_LEDs - writePinHigh(B0); - writePinHigh(D5); - #endif - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - is_master = has_usb(); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) { - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - int ret=serial_update_buffers(); - if (ret ) { -#ifndef DISABLE_PROMICRO_LEDs - if(ret==2) writePinLow(B0); -#endif - return 1; - } -#ifndef DISABLE_PROMICRO_LEDs - writePinHigh(B0); -#endif - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} - -uint8_t matrix_scan(void) { - if (is_master) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[offset+i] = serial_master_buffer[i]; - } - - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_master_buffer[i] = matrix[offset+i]; - } - - if( serial_transaction() ) { -#ifndef DISABLE_PROMICRO_LEDs - // turn on the indicator led when halves are disconnected - writePinLow(D5); -#endif - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { -#ifndef DISABLE_PROMICRO_LEDs - // turn off the indicator led on no error - writePinHigh(D5); -#endif - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_bin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/dm9records/ergoinu/post_rules.mk b/keyboards/dm9records/ergoinu/post_rules.mk deleted file mode 100644 index 02aa48104c..0000000000 --- a/keyboards/dm9records/ergoinu/post_rules.mk +++ /dev/null @@ -1,9 +0,0 @@ -ifneq ($(strip $(ERGOINU)),) - ifeq ($(findstring promicroled, $(ERGOINU)), promicroled) - DISABLE_PROMICRO_LEDs = no - endif -endif - -ifeq ($(strip $(DISABLE_PROMICRO_LEDs)), yes) - OPT_DEFS += -DDISABLE_PROMICRO_LEDs -endif diff --git a/keyboards/dm9records/ergoinu/readme.md b/keyboards/dm9records/ergoinu/readme.md index de0a1c6c97..45f91dbac2 100644 --- a/keyboards/dm9records/ergoinu/readme.md +++ b/keyboards/dm9records/ergoinu/readme.md @@ -1,13 +1,12 @@ -ErgoInu -=== +# ErgoInu  An (Not Portable But Small) Ergonomic Split Keyboard. -Keyboard Maintainer: [hsgw](https://github.com/hsgw/) [twitter](https://twitter.com/hsgw) -Hardware Supported: Pro Micro -Hardware Availability & Repository: [https://github.com/hsgw/ergoinu](https://github.com/hsgw/ergoinu) +* Keyboard Maintainer: [hsgw](https://github.com/hsgw/) [twitter](https://twitter.com/hsgw) +* Hardware Supported: Pro Micro +* Hardware Availability & Repository: [https://github.com/hsgw/ergoinu](https://github.com/hsgw/ergoinu) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/dm9records/ergoinu/rules.mk b/keyboards/dm9records/ergoinu/rules.mk index 895ce253d7..9bdc73b761 100644 --- a/keyboards/dm9records/ergoinu/rules.mk +++ b/keyboards/dm9records/ergoinu/rules.mk @@ -5,25 +5,19 @@ MCU = atmega32u4 BOOTLOADER = caterina # Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically +# change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SUBPROJECT_rev1 = no -USE_I2C = no # i2c is not supported +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -CUSTOM_MATRIX = yes -SRC += matrix.c serial.c split_util.c +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output -# ergoinu configs -DISABLE_PROMICRO_LEDs = yes +SPLIT_KEYBOARD = yes diff --git a/keyboards/dm9records/ergoinu/serial.c b/keyboards/dm9records/ergoinu/serial.c deleted file mode 100644 index 5919415877..0000000000 --- a/keyboards/dm9records/ergoinu/serial.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef USE_SERIAL - -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// Serial pulse period in microseconds. -#define SELECT_SERIAL_SPEED 1 -#if SELECT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #define READ_WRITE_START_ADJUST 23 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 50 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#else -#error Illegal Serial Speed -#endif - - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH 1 -#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input_with_pullup(); - -#if SERIAL_PIN_MASK == _BV(PD0) - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -#elif SERIAL_PIN_MASK == _BV(PD2) - // Enable INT2 - EIMSK |= _BV(INT2); - // Trigger on falling edge of INT2 - EICRA &= ~(_BV(ISC20) | _BV(ISC21)); -#else - #error unknown SERIAL_PIN_MASK value -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static -void sync_recv(void) { - for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - _delay_sub_us(READ_WRITE_START_ADJUST); - for ( uint8_t i = 0; i < 8; ++i) { - serial_delay_half1(); // read the middle of pulses - byte = (byte << 1) | serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 1<<7; - while( b ) { - if(data & b) { - serial_high(); - } else { - serial_low(); - } - b >>= 1; - serial_delay(); - } - serial_low(); // sync_send() / senc_recv() need raise edge -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - serial_output(); - - // slave send phase - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - sync_send(); - serial_write_byte(serial_slave_buffer[i]); - checksum += serial_slave_buffer[i]; - } - sync_send(); - serial_write_byte(checksum); - - // slave switch to input - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 - - // slave recive phase - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - sync_recv(); - serial_master_buffer[i] = serial_read_byte(); - checksum_computed += serial_master_buffer[i]; - } - sync_recv(); - uint8_t checksum_received = serial_read_byte(); - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } - - sync_recv(); //weit master output to high -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH); - - // wait for the slaves response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - sei(); - return 1; - } - - // master recive phase - // if the slave is present syncronize with it - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - sync_recv(); - serial_slave_buffer[i] = serial_read_byte(); - checksum_computed += serial_slave_buffer[i]; - } - sync_recv(); - uint8_t checksum_received = serial_read_byte(); - - if (checksum_computed != checksum_received) { - serial_output(); - serial_high(); - sei(); - return 2; - } - - // master switch to output - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); // 3 - serial_delay_half1(); //4 - - // master send phase - uint8_t checksum = 0; - - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - sync_send(); - serial_write_byte(serial_master_buffer[i]); - checksum += serial_master_buffer[i]; - } - sync_send(); - serial_write_byte(checksum); - - // always, release the line when not in use - sync_send(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/dm9records/ergoinu/serial.h b/keyboards/dm9records/ergoinu/serial.h deleted file mode 100644 index 67cf06ac6b..0000000000 --- a/keyboards/dm9records/ergoinu/serial.h +++ /dev/null @@ -1,24 +0,0 @@ -#pragma once - -#include <stdbool.h> - -// //////////////////////////////////////////// -// Need Soft Serial defines in serial_config.h -// //////////////////////////////////////////// -// ex. -// #define SERIAL_PIN_DDR DDRD -// #define SERIAL_PIN_PORT PORTD -// #define SERIAL_PIN_INPUT PIND -// #define SERIAL_PIN_MASK _BV(PD?) ?=0,2 -// #define SERIAL_PIN_INTERRUPT INT?_vect ?=0,2 -// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -// #define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); diff --git a/keyboards/dm9records/ergoinu/serial_config.h b/keyboards/dm9records/ergoinu/serial_config.h deleted file mode 100644 index a16db684ca..0000000000 --- a/keyboards/dm9records/ergoinu/serial_config.h +++ /dev/null @@ -1,11 +0,0 @@ -#pragma once - -/* Soft Serial defines */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD2) -#define SERIAL_PIN_INTERRUPT INT2_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 diff --git a/keyboards/dm9records/ergoinu/split_util.c b/keyboards/dm9records/ergoinu/split_util.c deleted file mode 100644 index 0cbc2c69c4..0000000000 --- a/keyboards/dm9records/ergoinu/split_util.c +++ /dev/null @@ -1,56 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" - -#include "serial.h" - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { - serial_master_init(); -} - -static void keyboard_slave_setup(void) { - serial_slave_init(); -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); -} diff --git a/keyboards/dm9records/ergoinu/split_util.h b/keyboards/dm9records/ergoinu/split_util.h deleted file mode 100644 index 11cfd5455a..0000000000 --- a/keyboards/dm9records/ergoinu/split_util.h +++ /dev/null @@ -1,12 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include "eeconfig.h" - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); diff --git a/keyboards/duck/jetfire/matrix.c b/keyboards/duck/jetfire/matrix.c index 2dd94a72ac..729fa6dd14 100644 --- a/keyboards/duck/jetfire/matrix.c +++ b/keyboards/duck/jetfire/matrix.c @@ -116,12 +116,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/ergodox_stm32/matrix.c b/keyboards/ergodox_stm32/matrix.c index 383bf9790a..094d4a9e0f 100644 --- a/keyboards/ergodox_stm32/matrix.c +++ b/keyboards/ergodox_stm32/matrix.c @@ -119,10 +119,6 @@ uint8_t matrix_scan(void) { return 0; } -bool matrix_is_modified(void) { - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1 << col)); diff --git a/keyboards/ergotaco/matrix.c b/keyboards/ergotaco/matrix.c index e5af1c27fd..16300a7e4f 100644 --- a/keyboards/ergotaco/matrix.c +++ b/keyboards/ergotaco/matrix.c @@ -199,11 +199,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/gboards/gergoplex/matrix.c b/keyboards/gboards/gergoplex/matrix.c index 716390241a..a075b85725 100644 --- a/keyboards/gboards/gergoplex/matrix.c +++ b/keyboards/gboards/gergoplex/matrix.c @@ -152,11 +152,6 @@ uint8_t matrix_scan(void) { return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } diff --git a/keyboards/georgi/matrix.c b/keyboards/georgi/matrix.c index 438412102b..7d635ad8d7 100644 --- a/keyboards/georgi/matrix.c +++ b/keyboards/georgi/matrix.c @@ -220,11 +220,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/gergo/matrix.c b/keyboards/gergo/matrix.c index 655e729356..443e97132b 100644 --- a/keyboards/gergo/matrix.c +++ b/keyboards/gergo/matrix.c @@ -273,11 +273,6 @@ uint8_t matrix_scan(void) { return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } diff --git a/keyboards/handwired/dactyl/matrix.c b/keyboards/handwired/dactyl/matrix.c index a21cd08e14..a70e8c5aca 100644 --- a/keyboards/handwired/dactyl/matrix.c +++ b/keyboards/handwired/dactyl/matrix.c @@ -281,14 +281,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/handwired/frenchdev/matrix.c b/keyboards/handwired/frenchdev/matrix.c index 5ab254a6f9..a043f78538 100644 --- a/keyboards/handwired/frenchdev/matrix.c +++ b/keyboards/handwired/frenchdev/matrix.c @@ -174,12 +174,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/handwired/not_so_minidox/matrix.c b/keyboards/handwired/not_so_minidox/matrix.c index b7cec9370c..d2bbf7d303 100644 --- a/keyboards/handwired/not_so_minidox/matrix.c +++ b/keyboards/handwired/not_so_minidox/matrix.c @@ -239,12 +239,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/handwired/promethium/matrix.c b/keyboards/handwired/promethium/matrix.c index e3a41af288..90dbce14a9 100644 --- a/keyboards/handwired/promethium/matrix.c +++ b/keyboards/handwired/promethium/matrix.c @@ -148,14 +148,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) diff --git a/keyboards/handwired/pterodactyl/matrix.c b/keyboards/handwired/pterodactyl/matrix.c index 21e6a128df..d0f74802a0 100644 --- a/keyboards/handwired/pterodactyl/matrix.c +++ b/keyboards/handwired/pterodactyl/matrix.c @@ -282,14 +282,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/handwired/wakizashi40/config.h b/keyboards/handwired/wakizashi40/config.h new file mode 100644 index 0000000000..78f85f2197 --- /dev/null +++ b/keyboards/handwired/wakizashi40/config.h @@ -0,0 +1,20 @@ +/* Copyright 2021 xiao (@xia0) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" +#define DYNAMIC_KEYMAP_LAYER_COUNT 12 diff --git a/keyboards/handwired/wakizashi40/info.json b/keyboards/handwired/wakizashi40/info.json new file mode 100644 index 0000000000..b64ab55116 --- /dev/null +++ b/keyboards/handwired/wakizashi40/info.json @@ -0,0 +1,88 @@ +{ + "manufacturer": "fumbucker", + "keyboard_name": "Wakizashi 40", + "maintainer": "fumbucker", + "debounce": 5, + "processor": "at90usb1286", + "diode_direction": "COL2ROW", + "features": { + "audio": false, + "backlight": false, + "bluetooth": false, + "bootmagic": true, + "command": false, + "console": true, + "extrakey": true, + "midi": false, + "mousekey": true, + "nkro": true, + "rgblight": false, + "unicode": false + }, + "matrix_pins": { + "cols": ["C5", "C4", "D2", "D3", "D4", "D5", "C6", "D7", "B0", "B1", "B2", "B3", "B4"], + "rows": ["C0", "C1", "C2", "C3"] + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x7740", + "vid": "0x6662" + }, + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "TAB", "matrix": [0, 0], "w": 1.5, "x": 0, "y": 0 }, + { "label": "Q", "matrix": [0, 2], "w": 1, "x": 1.5, "y": 0 }, + { "label": "W", "matrix": [0, 3], "w": 1, "x": 2.5, "y": 0 }, + { "label": "E", "matrix": [0, 4], "w": 1, "x": 3.5, "y": 0 }, + { "label": "R", "matrix": [0, 5], "w": 1, "x": 4.5, "y": 0 }, + { "label": "T", "matrix": [0, 6], "w": 1, "x": 5.5, "y": 0 }, + { "label": "Y", "matrix": [0, 7], "w": 1, "x": 6.5, "y": 0 }, + { "label": "U", "matrix": [0, 8], "w": 1, "x": 7.5, "y": 0 }, + { "label": "I", "matrix": [0, 9], "w": 1, "x": 8.5, "y": 0 }, + { "label": "O", "matrix": [0, 10], "w": 1, "x": 9.5, "y": 0 }, + { "label": "P", "matrix": [0, 11], "w": 1, "x": 10.5, "y": 0 }, + { "label": "BACKSPACE", "matrix": [0, 12], "w": 1.5, "x": 11.5, "y": 0 }, + + { "label": "CAPSLOCK", "matrix": [1, 0], "w": 1.25, "x": 0, "y": 1 }, + { "label": "A", "matrix": [1, 1], "w": 1, "x": 1.25, "y": 1 }, + { "label": "S", "matrix": [1, 2], "w": 1, "x": 2.25, "y": 1 }, + { "label": "D", "matrix": [1, 3], "w": 1, "x": 3.25, "y": 1 }, + { "label": "F", "matrix": [1, 4], "w": 1, "x": 4.25, "y": 1 }, + { "label": "G", "matrix": [1, 5], "w": 1, "x": 5.75, "y": 1 }, + { "label": "H", "matrix": [1, 7], "w": 1, "x": 6.75, "y": 1 }, + { "label": "J", "matrix": [1, 8], "w": 1, "x": 7.75, "y": 1 }, + { "label": "K", "matrix": [1, 9], "w": 1, "x": 8.75, "y": 1 }, + { "label": "L", "matrix": [1, 10], "w": 1, "x": 9.75, "y": 1 }, + { "label": "SEMICOLON", "matrix": [1, 11], "w": 1, "x": 10.75, "y": 1 }, + { "label": "ENTER", "matrix": [1, 12], "w": 1.25, "x": 11.75, "y": 1 }, + + { "label": "LSHIFT", "matrix": [2, 0], "w": 1, "x": 0, "y": 2 }, + { "label": "Z", "matrix": [2, 1], "w": 1, "x": 1, "y": 2 }, + { "label": "X", "matrix": [2, 2], "w": 1, "x": 2, "y": 2 }, + { "label": "C", "matrix": [2, 3], "w": 1, "x": 3, "y": 2 }, + { "label": "V", "matrix": [2, 4], "w": 1, "x": 4, "y": 2 }, + { "label": "B", "matrix": [2, 5], "w": 1, "x": 5, "y": 2 }, + { "label": "ESCAPE", "matrix": [2, 6], "w": 1, "x": 6, "y": 2 }, + { "label": "N", "matrix": [2, 7], "w": 1, "x": 7, "y": 2 }, + { "label": "M", "matrix": [2, 8], "w": 1, "x": 8, "y": 2 }, + { "label": "COMMA", "matrix": [2, 9], "w": 1, "x": 9, "y": 2 }, + { "label": "PERIOD", "matrix": [2, 10], "w": 1, "x": 10, "y": 2 }, + { "label": "SLASH", "matrix": [2, 11], "w": 1, "x": 11, "y": 2 }, + { "label": "RSHIFT", "matrix": [2, 12], "w": 1, "x": 12, "y": 2 }, + + { "label": "LCTRL", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "LWIN", "matrix": [3, 1], "w": 1.25, "x": 1.25, "y": 3 }, + { "label": "LALT", "matrix": [3, 3], "w": 1.25, "x": 2.5, "y": 3 }, + { "label": "SPACE1", "matrix": [3, 5], "w": 2.75, "x": 3.75, "y": 3 }, + { "label": "SPACE2", "matrix": [3, 7], "w": 2.75, "x": 6.5, "y": 3 }, + { "label": "RALT", "matrix": [3, 9], "w": 1.25, "x": 9.25, "y": 3 }, + { "label": "MENU", "matrix": [3, 11], "w": 1.25, "x": 10.5, "y": 3 }, + { "label": "RCTRL", "matrix": [3, 12], "w": 1.25, "x": 11.75, "y": 3 } + ] + } + } +} diff --git a/keyboards/handwired/wakizashi40/keymaps/default/keymap.c b/keyboards/handwired/wakizashi40/keymaps/default/keymap.c new file mode 100644 index 0000000000..910e5bde12 --- /dev/null +++ b/keyboards/handwired/wakizashi40/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2021 xiao (@xia0) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(2, KC_SPC), KC_LALT, KC_MENU, KC_LCTL), + + [1] = LAYOUT_all( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + MO(3), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + MO(11), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; diff --git a/keyboards/handwired/wakizashi40/keymaps/via/keymap.c b/keyboards/handwired/wakizashi40/keymaps/via/keymap.c new file mode 100644 index 0000000000..d456b8b40a --- /dev/null +++ b/keyboards/handwired/wakizashi40/keymaps/via/keymap.c @@ -0,0 +1,92 @@ +/* Copyright 2021 xiao (@xia0) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(2, KC_SPC), KC_LALT, KC_MENU, KC_LCTL), + + [1] = LAYOUT_all( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + MO(11), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + MO(11), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [4] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [5] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [6] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [7] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [8] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [9] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [10] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [11] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; diff --git a/keyboards/handwired/wakizashi40/keymaps/via/rules.mk b/keyboards/handwired/wakizashi40/keymaps/via/rules.mk new file mode 100644 index 0000000000..7a49719505 --- /dev/null +++ b/keyboards/handwired/wakizashi40/keymaps/via/rules.mk @@ -0,0 +1,4 @@ +# rules.mk overrides to enable VIA + +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/handwired/wakizashi40/readme.md b/keyboards/handwired/wakizashi40/readme.md new file mode 100644 index 0000000000..d94a75651c --- /dev/null +++ b/keyboards/handwired/wakizashi40/readme.md @@ -0,0 +1,19 @@ +# Wakizashi 40 + + + +Reverse stagger 40% keyboard based on the Katana 60. + +* Keyboard Maintainer: [fumbucker](https://github.com/xia0) +* Hardware Supported: Teensy2++ +* Hardware Availability: [thingiverse](https://www.thingiverse.com/thing:3467930) + +Make example for this keyboard (after setting up your build environment): + + make handwired/wakizashi40:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + +## Bootloader + +* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Capslock + R). diff --git a/keyboards/handwired/wakizashi40/rules.mk b/keyboards/handwired/wakizashi40/rules.mk new file mode 100644 index 0000000000..6e7633bfe0 --- /dev/null +++ b/keyboards/handwired/wakizashi40/rules.mk @@ -0,0 +1 @@ +# This file intentionally left blank diff --git a/keyboards/helix/pico/matrix.c b/keyboards/helix/pico/matrix.c index b18213d846..039cca6dcf 100644 --- a/keyboards/helix/pico/matrix.c +++ b/keyboards/helix/pico/matrix.c @@ -273,12 +273,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/helix/rev1/matrix.c b/keyboards/helix/rev1/matrix.c index aa2cc76905..f59391b596 100644 --- a/keyboards/helix/rev1/matrix.c +++ b/keyboards/helix/rev1/matrix.c @@ -239,12 +239,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/helix/rev2/matrix.c b/keyboards/helix/rev2/matrix.c index 8eed7e58b7..699c15358b 100644 --- a/keyboards/helix/rev2/matrix.c +++ b/keyboards/helix/rev2/matrix.c @@ -287,12 +287,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/hhkb/ansi/matrix.c b/keyboards/hhkb/ansi/matrix.c index 529ba8b8fc..5dde74cce9 100644 --- a/keyboards/hhkb/ansi/matrix.c +++ b/keyboards/hhkb/ansi/matrix.c @@ -163,15 +163,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix[i] != matrix_prev[i]) - return true; - } - return false; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/hhkb/jp/matrix.c b/keyboards/hhkb/jp/matrix.c index c0dca6a990..81db77fca7 100644 --- a/keyboards/hhkb/jp/matrix.c +++ b/keyboards/hhkb/jp/matrix.c @@ -164,15 +164,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix[i] != matrix_prev[i]) - return true; - } - return false; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/hid_liber/matrix.c b/keyboards/hid_liber/matrix.c index ff59a17153..da73c616d7 100755 --- a/keyboards/hid_liber/matrix.c +++ b/keyboards/hid_liber/matrix.c @@ -218,12 +218,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - // NOTE: no longer used - return true; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/kinesis/alvicstep/matrix.c b/keyboards/kinesis/alvicstep/matrix.c index 71619f8167..9c05374510 100644 --- a/keyboards/kinesis/alvicstep/matrix.c +++ b/keyboards/kinesis/alvicstep/matrix.c @@ -136,12 +136,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/meira/matrix.c b/keyboards/meira/matrix.c index ae1ae5ce9d..8e8e9485b4 100644 --- a/keyboards/meira/matrix.c +++ b/keyboards/meira/matrix.c @@ -161,12 +161,6 @@ uint8_t matrix_scan(void) return ret; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/nek_type_a/matrix.c b/keyboards/nek_type_a/matrix.c index a59598a503..b396be9911 100644 --- a/keyboards/nek_type_a/matrix.c +++ b/keyboards/nek_type_a/matrix.c @@ -205,14 +205,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/redscarf_iiplus/verb/matrix.c b/keyboards/redscarf_iiplus/verb/matrix.c index 42cfb7c037..88ecb586b3 100755 --- a/keyboards/redscarf_iiplus/verb/matrix.c +++ b/keyboards/redscarf_iiplus/verb/matrix.c @@ -94,13 +94,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/redscarf_iiplus/verc/matrix.c b/keyboards/redscarf_iiplus/verc/matrix.c index 42cfb7c037..88ecb586b3 100755 --- a/keyboards/redscarf_iiplus/verc/matrix.c +++ b/keyboards/redscarf_iiplus/verc/matrix.c @@ -94,13 +94,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/redscarf_iiplus/verd/matrix.c b/keyboards/redscarf_iiplus/verd/matrix.c index 78d1191b68..d9dbb3c0a3 100644 --- a/keyboards/redscarf_iiplus/verd/matrix.c +++ b/keyboards/redscarf_iiplus/verd/matrix.c @@ -94,13 +94,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/sirius/unigo66/custom_matrix.cpp b/keyboards/sirius/unigo66/custom_matrix.cpp index fba107c7cb..dfcf82c779 100644 --- a/keyboards/sirius/unigo66/custom_matrix.cpp +++ b/keyboards/sirius/unigo66/custom_matrix.cpp @@ -172,10 +172,6 @@ extern "C" return 1; } - bool matrix_is_modified(void) { - return matrix_is_mod; - } - bool matrix_is_on(uint8_t row, uint8_t col) { uint8_t code = CODE(row, col); diff --git a/keyboards/sixkeyboard/matrix.c b/keyboards/sixkeyboard/matrix.c index 64b46e9b0c..a6b28f3a12 100644 --- a/keyboards/sixkeyboard/matrix.c +++ b/keyboards/sixkeyboard/matrix.c @@ -114,11 +114,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/sx60/matrix.c b/keyboards/sx60/matrix.c index b7dc25425d..231e1c8836 100644 --- a/keyboards/sx60/matrix.c +++ b/keyboards/sx60/matrix.c @@ -172,14 +172,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/thedogkeyboard/matrix.c b/keyboards/thedogkeyboard/matrix.c index 474fbec030..2851859cf2 100644 --- a/keyboards/thedogkeyboard/matrix.c +++ b/keyboards/thedogkeyboard/matrix.c @@ -90,13 +90,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/yosino58/rev1/matrix.c b/keyboards/yosino58/rev1/matrix.c index 3db40b3829..e2be7113bf 100644 --- a/keyboards/yosino58/rev1/matrix.c +++ b/keyboards/yosino58/rev1/matrix.c @@ -289,12 +289,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { |