diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/handwired/dqz11n1g/config.h | 58 | ||||
| -rw-r--r-- | keyboards/handwired/dqz11n1g/dqz11n1g.h | 51 | ||||
| -rw-r--r-- | keyboards/handwired/dqz11n1g/info.json | 141 | ||||
| -rw-r--r-- | keyboards/handwired/dqz11n1g/keymaps/default/keymap.c | 72 | ||||
| -rw-r--r-- | keyboards/handwired/dqz11n1g/keymaps/default/readme.md | 17 | ||||
| -rw-r--r-- | keyboards/handwired/dqz11n1g/matrix.c | 131 | ||||
| -rw-r--r-- | keyboards/handwired/dqz11n1g/readme.md | 80 | ||||
| -rw-r--r-- | keyboards/handwired/dqz11n1g/rules.mk | 24 |
8 files changed, 574 insertions, 0 deletions
diff --git a/keyboards/handwired/dqz11n1g/config.h b/keyboards/handwired/dqz11n1g/config.h new file mode 100644 index 0000000000..0631787f55 --- /dev/null +++ b/keyboards/handwired/dqz11n1g/config.h @@ -0,0 +1,58 @@ +/* +Copyright (c) 2022 David Kuehling <dvdkhlng TA posteo TOD de> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x4451 +#define DEVICE_VER 0x0001 +#define PRODUCT DQz11N1G Controller Replacement + +/* Matrix size */ +#define MATRIX_ROWS 7 +#define MATRIX_COLS 19 + +/* Pin-out */ +#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6, B4 } + +/* The pin connecting to the SN74HC165 SH/~LD in */ +#define ROW_SHIFT_PIN B6 + +/* Column read via SPI (shift register) */ +/* #define MATRIX_COL_PINS { } */ +#define UNUSED_PINS + +#define LED_CAPS_LOCK_PIN F7 /* A0 */ +#define LED_NUM_LOCK_PIN F5 /*A2 */ +#define LED_SCROLL_LOCK_PIN F4 /*A3 */ + +#define LED_FUN_LOCK_PIN F6 /* A1 (handled in layer_state_set_user()) */ + +/* audio config */ +#define AUDIO_PIN B5 +#define AUDIO_CLICKY +#define AUDIO_INIT_DELAY +#define AUDIO_CLICKY_FREQ_RANDOMNESS 0.0f +#define NO_MUSIC_MODE + +/* diodes go row->col, though this is hard-coded in matrix.c and we drive the + * matrix differently: we have pull-down on the columns and drive the selected + * row high */ +/* #define DIODE_DIRECTION ROW2COL */ diff --git a/keyboards/handwired/dqz11n1g/dqz11n1g.h b/keyboards/handwired/dqz11n1g/dqz11n1g.h new file mode 100644 index 0000000000..f5c55bd6d5 --- /dev/null +++ b/keyboards/handwired/dqz11n1g/dqz11n1g.h @@ -0,0 +1,51 @@ +/* + * Copyright (c) 2022 David Kuehling <dvdkhlng TA posteo TOD de> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* Fill actually existing keys into the 7x19 keyboard matrix */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H, k0J, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1J, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2J, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, k3G, k3H, k3J, \ + k40, k41, k42, k43, k44, k45, k4D, k4E, k4F, k4G, k4H, k4J, \ + k51, k52, k53, k54, k5E, k5F, k5G, k5H, \ + k46, k47, k48, k4A, k4B, k4C, \ + k56, k57, k58, k5A, k5B, k5C, \ + k68, k6A \ +) { \ + /* left hand */ /* middle/thumb block */ /* right hand */ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H, k0J }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1J }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2J }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, k3G, k3H, k3J }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, XXX, k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, k4J }, \ + { XXX, k51, k52, k53, k54, XXX, k56, k57, k58, XXX, k5A, k5B, k5C, XXX, k5E, k5F, k5G, k5H, XXX }, \ + { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, k68, XXX, k6A, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX }, \ +} + +/* + * Local Variables: + * c-basic-offset:4 + * fill-column: 76 + * End: + */ diff --git a/keyboards/handwired/dqz11n1g/info.json b/keyboards/handwired/dqz11n1g/info.json new file mode 100644 index 0000000000..0c56752ffd --- /dev/null +++ b/keyboards/handwired/dqz11n1g/info.json @@ -0,0 +1,141 @@ +{ + "keyboard_name": "DQz11N1G", + "url": "https://github.com/dvdkhlng/qmk_firmware_dqz11n1g", + "maintainer": "dvdkhlng", + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0, "matrix": [0, 0] }, + {"x": 1, "y": 0, "matrix": [0, 1] }, + {"x": 2, "y": 0, "matrix": [0, 2] }, + {"x": 3, "y": 0, "matrix": [0, 3] }, + {"x": 4, "y": 0, "matrix": [0, 4] }, + {"x": 5, "y": 0, "matrix": [0, 5] }, + + {"x": 7, "y": 0, "matrix": [0, 6] }, + {"x": 8, "y": 0, "matrix": [0, 7] }, + {"x": 9, "y": 0, "matrix": [0, 8] }, + {"x": 10, "y": 0, "matrix": [0, 9] }, + {"x": 11, "y": 0, "matrix": [0, 10] }, + {"x": 12, "y": 0, "matrix": [0, 11] }, + {"x": 13, "y": 0, "matrix": [0, 12] }, + + {"x": 15, "y": 0, "matrix": [0, 13] }, + {"x": 16, "y": 0, "matrix": [0, 14] }, + {"x": 17, "y": 0, "matrix": [0, 15] }, + {"x": 18, "y": 0, "matrix": [0, 16] }, + {"x": 19, "y": 0, "matrix": [0, 17] }, + {"x": 20, "y": 0, "matrix": [0, 18] }, + + {"x": 0, "y": 1, "matrix": [1, 0] }, + {"x": 1, "y": 1, "matrix": [1, 1] }, + {"x": 2, "y": 1, "matrix": [1, 2] }, + {"x": 3, "y": 1, "matrix": [1, 3] }, + {"x": 4, "y": 1, "matrix": [1, 4] }, + {"x": 5, "y": 1, "matrix": [1, 5] }, + + {"x": 7, "y": 1, "matrix": [1, 6] }, + {"x": 8, "y": 1, "matrix": [1, 7] }, + {"x": 9, "y": 1, "matrix": [1, 8] }, + {"x": 10, "y": 1, "matrix": [1, 9] }, + {"x": 11, "y": 1, "matrix": [1, 10] }, + {"x": 12, "y": 1, "matrix": [1, 11] }, + {"x": 13, "y": 1, "matrix": [1, 12] }, + + {"x": 15, "y": 1, "matrix": [1, 13] }, + {"x": 16, "y": 1, "matrix": [1, 14] }, + {"x": 17, "y": 1, "matrix": [1, 15] }, + {"x": 18, "y": 1, "matrix": [1, 16] }, + {"x": 19, "y": 1, "matrix": [1, 17] }, + {"x": 20, "y": 1, "matrix": [1, 18] }, + + {"x": 0, "y": 2, "matrix": [2, 0] }, + {"x": 1, "y": 2, "matrix": [2, 1] }, + {"x": 2, "y": 2, "matrix": [2, 2] }, + {"x": 3, "y": 2, "matrix": [2, 3] }, + {"x": 4, "y": 2, "matrix": [2, 4] }, + {"x": 5, "y": 2, "matrix": [2, 5] }, + + {"x": 7, "y": 2, "matrix": [2, 6] }, + {"x": 8, "y": 2, "matrix": [2, 7] }, + {"x": 9, "y": 2, "matrix": [2, 8] }, + {"x": 10, "y": 2, "matrix": [2, 9] }, + {"x": 11, "y": 2, "matrix": [2, 10] }, + {"x": 12, "y": 2, "matrix": [2, 11] }, + {"x": 13, "y": 2, "matrix": [2, 12] }, + + {"x": 15, "y": 2, "matrix": [2, 13] }, + {"x": 16, "y": 2, "matrix": [2, 14] }, + {"x": 17, "y": 2, "matrix": [2, 15] }, + {"x": 18, "y": 2, "matrix": [2, 16] }, + {"x": 19, "y": 2, "matrix": [2, 17] }, + {"x": 20, "y": 2, "matrix": [2, 18] }, + + {"x": 0, "y": 3, "matrix": [3, 0] }, + {"x": 1, "y": 3, "matrix": [3, 1] }, + {"x": 2, "y": 3, "matrix": [3, 2] }, + {"x": 3, "y": 3, "matrix": [3, 3] }, + {"x": 4, "y": 3, "matrix": [3, 4] }, + {"x": 5, "y": 3, "matrix": [3, 5] }, + + {"x": 7, "y": 3, "matrix": [3, 6] }, + {"x": 8, "y": 3, "matrix": [3, 7] }, + {"x": 9, "y": 3, "matrix": [3, 8] }, + {"x": 10, "y": 3, "matrix": [3, 9] }, + {"x": 11, "y": 3, "matrix": [3, 10] }, + {"x": 12, "y": 3, "matrix": [3, 11] }, + {"x": 13, "y": 3, "matrix": [3, 12] }, + + {"x": 15, "y": 3, "matrix": [3, 13] }, + {"x": 16, "y": 3, "matrix": [3, 14] }, + {"x": 17, "y": 3, "matrix": [3, 15] }, + {"x": 18, "y": 3, "matrix": [3, 16] }, + {"x": 19, "y": 3, "matrix": [3, 17] }, + {"x": 20, "y": 3, "matrix": [3, 18] }, + + {"x": 0, "y": 4, "h": 2, "matrix": [4, 0] }, + {"x": 1, "y": 4, "matrix": [4, 1] }, + {"x": 2, "y": 4, "matrix": [4, 2] }, + {"x": 3, "y": 4, "matrix": [4, 3] }, + {"x": 4, "y": 4, "matrix": [4, 4] }, + {"x": 5, "y": 4, "matrix": [4, 5] }, + + {"x": 15, "y": 4, "matrix": [4, 13] }, + {"x": 16, "y": 4, "matrix": [4, 14] }, + {"x": 17, "y": 4, "matrix": [4, 15] }, + {"x": 18, "y": 4, "matrix": [4, 16] }, + {"x": 19, "y": 4, "matrix": [4, 17] }, + {"x": 20, "y": 4, "h": 2, "matrix": [4, 18] }, + + {"x": 1, "y": 5, "matrix": [5, 1] }, + {"x": 2, "y": 5, "matrix": [5, 2] }, + {"x": 3, "y": 5, "matrix": [5, 3] }, + {"x": 4, "y": 5, "matrix": [5, 4] }, + + {"x": 16, "y": 5, "matrix": [5, 14] }, + {"x": 17, "y": 5, "matrix": [5, 15] }, + {"x": 18, "y": 5, "matrix": [5, 16] }, + {"x": 19, "y": 5, "matrix": [5, 17] }, + + {"x": 5, "y": 7, "matrix": [4, 6] }, + {"x": 6, "y": 7, "matrix": [4, 7] }, + {"x": 7, "y": 7, "matrix": [4, 8] }, + + {"x": 13, "y": 7, "matrix": [4, 10] }, + {"x": 14, "y": 7, "matrix": [4, 11] }, + {"x": 15, "y": 7, "matrix": [4, 12] }, + + {"x": 5, "y": 8, "h": 2, "matrix": [5, 6] }, + {"x": 6, "y": 8, "h": 2, "matrix": [5, 7] }, + {"x": 7, "y": 8, "matrix": [5, 8] }, + + {"x": 13, "y": 8, "matrix": [5, 10] }, + {"x": 14, "y": 8, "h": 2, "matrix": [5, 11] }, + {"x": 15, "y": 8, "h": 2, "matrix": [5, 12] }, + + {"x": 7, "y": 9, "matrix": [6, 8] }, + {"x": 13, "y": 9, "matrix": [6, 10] } + ] + } + } +} diff --git a/keyboards/handwired/dqz11n1g/keymaps/default/keymap.c b/keyboards/handwired/dqz11n1g/keymaps/default/keymap.c new file mode 100644 index 0000000000..29d9cad7b7 --- /dev/null +++ b/keyboards/handwired/dqz11n1g/keymaps/default/keymap.c @@ -0,0 +1,72 @@ +/* Copyright (c) 2022 David Kuehling < dvdkhlng TA posteo TOD de > + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +enum layer_names { _DEFAULT, _FUNCTION }; +#define KC_FUN TG(_FUNCTION) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DEFAULT] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_FUN, KC_NUM, KC_P7, KC_P8, KC_P9, KC_PSLS, KC_PSCR, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_VOLU, KC_ESC, KC_P4, KC_P5, KC_P6, KC_PAST, KC_SCRL, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, + KC_NUBS,KC_Q, KC_W, KC_E, KC_R, KC_T, KC_VOLD, KC_GRV, KC_P1, KC_P2, KC_P3, KC_PMNS, KC_BRK, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_MUTE, KC_WSCH,KC_P0,KC_PDOT,KC_PENT,KC_PPLS,KC_INS, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, + KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, + /* */ KC_LCTL, KC_LGUI,KC_LALT,KC_RBRC, KC_NUHS,KC_RALT,KC_APP, KC_RCTL, /* */ + + /* thumb keys: */ KC_BSPC, KC_HOME, KC_END, KC_LEFT, KC_RGHT, KC_DEL, + /* thumb keys: */ KC_SPC, KC_TAB, KC_PGUP, KC_UP, KC_ENT, KC_SPC, + /* thumb keys: */ KC_PGDN, KC_DOWN + ), + + /* This is the "function key locked" layer. It is not documented by + * Maltron, so just putting some "Quantum" keycodes here for testing that + * the layer exists and Fun Lock LED works. */ + [_FUNCTION] = LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS,KC_TRNS,KC_BTN3,KC_MS_U,KC_WH_U,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, CK_UP, AU_ON, KC_MS_L,KC_BTN1,KC_MS_R,KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, CK_DOWN,AU_OFF, KC_BTN2,KC_MS_D,KC_WH_D,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, CK_TOGG,KC_NO, KC_ACL0,KC_ACL1,KC_ACL2,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + /* */ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* */ + + /* thumb keys: */ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + /* thumb keys: */ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + /* thumb keys: */ KC_NO, KC_NO + ) +}; + +/* Show "Fun Lock" layer state via the "Fun Lock" LED */ +layer_state_t layer_state_set_user(layer_state_t state) { + + setPinOutput(LED_FUN_LOCK_PIN); + + if (layer_state_cmp(state, _FUNCTION)) + writePinHigh(LED_FUN_LOCK_PIN); + else + writePinLow(LED_FUN_LOCK_PIN); + + return state; +} + +/* + * Local Variables: + * c-basic-offset:4 + * fill-column: 76 + * End: + */ diff --git a/keyboards/handwired/dqz11n1g/keymaps/default/readme.md b/keyboards/handwired/dqz11n1g/keymaps/default/readme.md new file mode 100644 index 0000000000..d61546eb37 --- /dev/null +++ b/keyboards/handwired/dqz11n1g/keymaps/default/readme.md @@ -0,0 +1,17 @@ + + +# Default Layout for DQz11N1G-DE + +This is the layout corresponding to what the Maltron keyboard DQz11N1G-DE I +own came with (using the original pre-installed controller). Note that this +differs from German Maltron layout as published on [Maltron's +website](https://www.maltron.com/germany.html). Use the photo above as a +reference for the layout implemented here. + +I did not find any official documentation about the the Function Lock key on +the original Maltron keyboards. It seems that it implements some of the +features that are documented for the one-handed Maltron keyboards. Most +keys don't send any keycodes at all when function lock is enabed. + +We instead map some of the Quantum keycodes (mouse keys and audio control) +in the middle (keypad) section of the keypad, when Function Lock is enabled.
\ No newline at end of file diff --git a/keyboards/handwired/dqz11n1g/matrix.c b/keyboards/handwired/dqz11n1g/matrix.c new file mode 100644 index 0000000000..f9f3f2b68f --- /dev/null +++ b/keyboards/handwired/dqz11n1g/matrix.c @@ -0,0 +1,131 @@ +/* + Copyright (c) 2022 David Kuehling <dvdkhlng TA posteo TOD de> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <string.h> + +#include <avr/io.h> + +#include "spi_master.h" +#include "quantum.h" +#include "matrix.h" + +static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; + +static void unselect_rows(void); + +void matrix_init_custom(void) { + /* initialize row pins */ + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + setPinOutput(row_pins[row]); + } + unselect_rows(); + + /* columns read via shift-register on SPI lines */ + + /* Enable SPI, Master, set clock rate fck/2. First bit already at Qh + * output before clock edge (CPHA=0). SN74HC165 shift register shifts + * on low-to-high transition (CPOL=1). Receive the LSB first (DORD=1). + */ + bool lsbFirst = true; + uint8_t mode = 2; /* CPOL=1, CPHA=0 */ + uint16_t divisor = 16; + + /* According to Atmega32U4 datasheet, PB0 *must* be set to output, + * otherwise it will interfere with SPI master operation. On pro-micro + * it's connected to a yellew LED. */ + pin_t slavePin = PB0; + spi_init(); + spi_start(slavePin, lsbFirst, mode, divisor); + + /* Initialize pin controlling the shift register's SH/~LD pin */ + setPinOutput(ROW_SHIFT_PIN); +} + +static void select_row(uint8_t row) { + pin_t pin = row_pins[row]; + if (pin != NO_PIN) { + writePinHigh(pin); + } +} + +static void unselect_row(uint8_t row) { + pin_t pin = row_pins[row]; + if (pin != NO_PIN) { + writePinLow(pin); + } +} + +static void unselect_rows(void) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + unselect_row(row); + } +} + +bool matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + /* Start with a clear matrix row */ + matrix_row_t current_row_value = 0; + + /* Set shift register SH/~LD pin to "load" mode */ + writePinLow(ROW_SHIFT_PIN); + select_row(current_row); + matrix_output_select_delay(); + + /* Set shift register SH/~LD pin to "shift" mode */ + writePinHigh(ROW_SHIFT_PIN); + + /* For each octet of columns... */ + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index += 8) { + spi_status_t read_result = spi_read(); + if (read_result >= 0) { + /* only if SPI read successful: populate the matrix row with the + state of the 8 consecutive column bits */ + current_row_value |= ((matrix_row_t)read_result << col_index); + } + } + + /* Unselect row & wait for all columns signals to go high. */ + unselect_row(current_row); + matrix_output_unselect_delay(current_row, current_row_value != 0); + + /* Update row in matrix. */ + if (current_row_value != current_matrix[current_row]) { + current_matrix[current_row] = current_row_value; + return true; + } + + return false; +} + +bool matrix_scan_custom(matrix_row_t curr_matrix[]) { + bool changed = false; + + /* set row, read cols */ + for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { + changed |= matrix_read_cols_on_row(curr_matrix, current_row); + } + + return changed; +} + +/* + * Local Variables: + * c-basic-offset:4 + * fill-column: 76 + * End: + */ diff --git a/keyboards/handwired/dqz11n1g/readme.md b/keyboards/handwired/dqz11n1g/readme.md new file mode 100644 index 0000000000..0e3a57873d --- /dev/null +++ b/keyboards/handwired/dqz11n1g/readme.md @@ -0,0 +1,80 @@ +# DQz11N1G + + + +Firmware for a DIY controller replacement for one of the ortholinear contoured +keyboards manufactured by [PCD Maltron Ltd](https://www.maltron.com) + +This work here in no way officially associated with PCD Maltron Ltd and comes +with NO WARRANTY. Modifying your Maltron keyboard as described below will +certainly void your warranty and may cause damage to your keyboard. Proceed +at your own risk! + +* maintainer: [David Kuehling](https://github.com/dvdkhlng/qmk_firmware_dqz11n1g) +* Hardware Supported: Maltron DQz11N1G with a replacement controller board + assembled as described below. The work here is based on a german version + of the keyboard: DQz11N1G-DE. I assume, but don't know for sure, that + minor or no changes at all are required to make this work on different + language versions of the keyboard. +* Hardware Availability: + * [PCD Maltron Ltd](https://www.maltron.com), for the original keyboard + * 1x [Arduino Pro Micro](https://www.sparkfun.com/products/12640) + * 3x [SN74HC165](https://www.ti.com/product/SN74HC165) + * 1x DIL connector 2 rows a 17 pins. + * 19x pull-down resistors (10k Ohm), + * 4 LED current limiting resistors (not sure about the correct resistance, + using 470 Ohm here) + +Make example for this keyboard (after setting up your build environment): + + make handwired/dqz11n1g:default + +## In Detail + +[PCD Maltron Ltd](https://www.maltron.com) manufacturs ergonomic keyboards +that appear to be hand-wired internally. For the Maltron DQz11N1G-DE +keyboard that I happen to own, the keyboard matrix is wired to a 34-pin DIL +connector. This makes it rather easy to replace the proprietary +controller-board with a self-made board based on the QMK firmware. + +I don't really like the default layout of my Maltron DQz11N1G-DE keyboard, +and modding it to work with QMK allows me to adapt it to my needs. It +especially allows for the two space keys to assume different roles, thereby +creating an additional easily reachable thumb-key. + +### Internal Details of Keyboard Matrix and DIL Connector + + + + + +### Replacement Keyboard Controller Board + +Due to supply chain problems, I decided to base this on an +Arduino-compatible [Pro Micro](https://www.sparkfun.com/products/12640) +board which is still easy to source. + +Unfortunately pin-count of the DQz11N1G-DE's keyboard matrix is way beyond +the Pro Micro's available I/O pin count. I'm using three 8-bit +shift-registers ([SN74HC165](https://www.ti.com/product/SN74HC165) ) to +connect the 19 colums of the keyboard matrix for readout. Due to diode +direction in DQz11N1G-DE we also need 19 pull-down resistors one for each of +the utilized shift-register inputs. + +This is a design sketch of the replacement board this is based on. Note how +we need a custom matrix.c source file to deal with the shift register based +keyboard readout. + + + +This is how the assembled controller board looks like, on the right side you +see the original PIC-based controller the keyboard ships with. + + + +Inside of the keyboard after installing the new controller board: + + + +(Not visible in the photo: I drilled hole into the keyboard above the USB +connector for a reset switch to simplify flashing controller firmware) diff --git a/keyboards/handwired/dqz11n1g/rules.mk b/keyboards/handwired/dqz11n1g/rules.mk new file mode 100644 index 0000000000..db8a809da9 --- /dev/null +++ b/keyboards/handwired/dqz11n1g/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Keyboard matrix uses shift-registers read via SPI +CUSTOM_MATRIX = lite +SRC += matrix.c +QUANTUM_LIB_SRC += spi_master.c + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = yes # Audio output + |