6 files changed, 56 insertions, 0 deletions
diff --git a/keyboards/annepro2/c15/config.h b/keyboards/annepro2/c15/config.h
index ff92aeea8e..2ebb962efb 100644
--- a/keyboards/annepro2/c15/config.h
+++ b/keyboards/annepro2/c15/config.h
@@ -49,3 +49,21 @@
 
 // Obins stock firmware has something similar to this already enabled, but disabled by default in QMK
 #define PERMISSIVE_HOLD
+
+// SPI configuration
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN A0
+#define SPI_MOSI_PIN A1
+#define SPI_MISO_PIN A2
+
+// Flash configuration
+#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B6
+#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 16
+#define EXTERNAL_FLASH_PAGE_SIZE 256
+#define EXTERNAL_FLASH_SECTOR_SIZE 4096
+#define EXTERNAL_FLASH_BLOCK_SIZE 4096
+#define EXTERNAL_FLASH_SIZE (256 * 1024) // 2M-bit flash size
+
+// Wear-leveling driver configuration
+#define WEAR_LEVELING_LOGICAL_SIZE 1024
+#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)
diff --git a/keyboards/annepro2/c15/rules.mk b/keyboards/annepro2/c15/rules.mk
index 2c518b6339..302aeecbe6 100644
--- a/keyboards/annepro2/c15/rules.mk
+++ b/keyboards/annepro2/c15/rules.mk
@@ -26,6 +26,10 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
 
+# Wear-levelling driver
+EEPROM_DRIVER = wear_leveling
+WEAR_LEVELING_DRIVER = spi_flash
+
 # Custom RGB matrix handling
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = custom
diff --git a/keyboards/annepro2/c18/config.h b/keyboards/annepro2/c18/config.h
index 82a406a157..5e4978048b 100644
--- a/keyboards/annepro2/c18/config.h
+++ b/keyboards/annepro2/c18/config.h
@@ -47,3 +47,21 @@
 
 // Obins stock firmware has something similar to this already enabled, but disabled by default in QMK
 #define PERMISSIVE_HOLD
+
+// SPI configuration
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN A0
+#define SPI_MOSI_PIN A1
+#define SPI_MISO_PIN A2
+
+// Flash configuration
+#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN A3
+#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 16
+#define EXTERNAL_FLASH_PAGE_SIZE 256
+#define EXTERNAL_FLASH_SECTOR_SIZE 4096
+#define EXTERNAL_FLASH_BLOCK_SIZE 4096
+#define EXTERNAL_FLASH_SIZE (256 * 1024) // 2M-bit flash size
+
+// Wear-leveling driver configuration
+#define WEAR_LEVELING_LOGICAL_SIZE 1024
+#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)
diff --git a/keyboards/annepro2/c18/rules.mk b/keyboards/annepro2/c18/rules.mk
index 60c2e08648..b1c7208f8b 100644
--- a/keyboards/annepro2/c18/rules.mk
+++ b/keyboards/annepro2/c18/rules.mk
@@ -26,6 +26,10 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
 
+# Wear-levelling driver
+EEPROM_DRIVER = wear_leveling
+WEAR_LEVELING_DRIVER = spi_flash
+
 # Custom RGB matrix handling
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = custom
diff --git a/keyboards/annepro2/halconf.h b/keyboards/annepro2/halconf.h
index 686b91a7fb..dcb04eab1b 100644
--- a/keyboards/annepro2/halconf.h
+++ b/keyboards/annepro2/halconf.h
@@ -25,4 +25,8 @@
 
 #define SERIAL_USB_BUFFERS_SIZE 256
 
+#define HAL_USE_SPI TRUE
+#define SPI_USE_WAIT TRUE
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+
 #include_next <halconf.h>
diff --git a/keyboards/annepro2/mcuconf.h b/keyboards/annepro2/mcuconf.h
index 8265fe6eb9..9e39bd9681 100644
--- a/keyboards/annepro2/mcuconf.h
+++ b/keyboards/annepro2/mcuconf.h
@@ -60,3 +60,11 @@
 
 #define HT32_USB_USE_USB0 TRUE
 #define HT32_USB_USB0_IRQ_PRIORITY 5
+
+/*
+ * SPI driver setting
+ */
+
+#define HT32_SPI_USE_SPI1 TRUE
+#define HT32_SPI1_IRQ_PRIORITY 9
+