diff options
Diffstat (limited to 'keyboards')
422 files changed, 27757 insertions, 7979 deletions
diff --git a/keyboards/alps64/Makefile b/keyboards/alps64/Makefile index d8325e6c89..4e2a6f00fd 100644 --- a/keyboards/alps64/Makefile +++ b/keyboards/alps64/Makefile @@ -1,70 +1,3 @@ - - -# Target file name (without extension). - -# project specific files -SRC = led.c - -# MCU name -MCU = atmega32u2 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/alps64/rules.mk b/keyboards/alps64/rules.mk new file mode 100644 index 0000000000..c326d3e26c --- /dev/null +++ b/keyboards/alps64/rules.mk @@ -0,0 +1,66 @@ + + +# Target file name (without extension). + +# project specific files +SRC = led.c + +# MCU name +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
\ No newline at end of file diff --git a/keyboards/amj60/Makefile b/keyboards/amj60/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/amj60/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/amj60/amj60.c b/keyboards/amj60/amj60.c new file mode 100644 index 0000000000..993a5917db --- /dev/null +++ b/keyboards/amj60/amj60.c @@ -0,0 +1,30 @@ +#include "amj60.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB |= (1<<2); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB &= ~(1<<2); + } else { + // Turn capslock off + PORTB |= (1<<2); + } +} diff --git a/keyboards/amj60/amj60.h b/keyboards/amj60/amj60.h new file mode 100644 index 0000000000..a0cb473310 --- /dev/null +++ b/keyboards/amj60/amj60.h @@ -0,0 +1,153 @@ +#ifndef AMJ60_H +#define AMJ60_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +/* AMJ60 layout to the best of my knowledge matrix layout + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49| + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |-----------------------------------------------------------| + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c | 3d | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \ +} + +/* + * ANSI + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |-----------------------------------------------------------| + * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +#define KEYMAP_ANSI( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ +} + +/* AMJ60 HHKB matrix layout + * ,------------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 | + * |------------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |------------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |------------------------------------------------------------| + * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c | + * |------------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `------------------------------------------------------------' + */ + +#define KEYMAP_HHKB( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \ +} + +/* ISO + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d | + * |-----------------------------------------------------------| + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +#define KEYMAP_ISO( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ +} +/* ISO w/ split right shift key matrix layout + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d | + * |-----------------------------------------------------------| + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +#define KEYMAP_ISO_SPLITRSHIFT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h new file mode 100644 index 0000000000..d98e0e9f2f --- /dev/null +++ b/keyboards/amj60/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6066 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Han Chen +#define PRODUCT AMJ60 +#define DESCRIPTION qmk port of AMJ60 PCB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5} +#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3} +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration + */ + +#define RGB_DI_PIN E2 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/amj60/keymaps/iso_split_rshift/Makefile b/keyboards/amj60/keymaps/iso_split_rshift/Makefile new file mode 100644 index 0000000000..2969ed8aec --- /dev/null +++ b/keyboards/amj60/keymaps/iso_split_rshift/Makefile @@ -0,0 +1,23 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/amj60/keymaps/iso_split_rshift/build.sh b/keyboards/amj60/keymaps/iso_split_rshift/build.sh new file mode 100755 index 0000000000..6b4b4568f5 --- /dev/null +++ b/keyboards/amj60/keymaps/iso_split_rshift/build.sh @@ -0,0 +1,42 @@ +#!/bin/bash +# adjust for cpu +# -j 16 gave best result on a hyperthreaded quad core core i7 + +LIMIT=10 +THREADS="-j 16" +KMAP=iso_split_rshift + +echo "We need sudo later" +sudo ls 2>&1 /dev/null + +function wait_bootloader { + echo "Waiting for Bootloader..." + local STARTTIME=$(date +"%s") + local REMIND=0 + local EXEC=dfu-programmer + local TARGET=atmega32u4 + while true + do + sudo $EXEC $TARGET get > /dev/null 2>&1 + [ $? -eq 0 ] && break + ENDTIME=$(date +"%s") + DURATION=$(($ENDTIME-$STARTTIME)) + if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] + then + echo "Did you forget to press the reset button?" + REMIND=1 + fi + sleep 1 + done +} +make clean +make KEYMAP=${KMAP} ${THREADS} +if [[ $? -eq 0 ]] +then + echo "please trigger flashing!" + wait_bootloader + sudo make KEYMAP=${KMAP} dfu ${THREADS} +else + echo "make failed" + exit 77 +fi diff --git a/keyboards/amj60/keymaps/iso_split_rshift/keymap.c b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c new file mode 100644 index 0000000000..60fb0bfb0b --- /dev/null +++ b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c @@ -0,0 +1,147 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "amj60.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DEF 0 +#define _SPC 1 +#define _TAB 2 +#define _SFX 3 + +// dual-role shortcuts +#define TABDUAL LT(_TAB, KC_TAB) +#define CAPSDUAL CTL_T(KC_ESC) +#define SPACEDUAL LT(_SPC, KC_SPACE) +#define ENTERDUAL CTL_T(KC_ENT) +// arrow cluster duality bottom right corner +#define ARRLEFT ALT_T(KC_LEFT) +#define ARRDOWN GUI_T(KC_DOWN) +#define ARRUP SFT_T(KC_UP) +#define ARRRIGHT CTL_T(KC_RIGHT) +// german brackets +#define GER_CUR_L RALT(KC_7) // [ +#define GER_CUR_R RALT(KC_0) // ] +#define GER_PAR_L LSFT(KC_8) // ( +#define GER_PAR_R LSFT(KC_9) // ) +#define GER_ANG_L KC_NUBS // < +#define GER_ANG_R LSFT(KC_NUBS) // > +#define GER_BRC_L RALT(KC_8) // [ +#define GER_BRC_R RALT(KC_9) // ] + +// increase readability +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _DEF: Default Layer + * ,-----------------------------------------------------------. + * |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 + * |-----------------------------------------------------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | + * |-----------------------------------------------------------| + * |Sft | < | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP + * |-----------------------------------------------------------| + * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is + * `-----------------------------------------------------------' LEFT DWN RIGHT + */ + [_DEF] = KEYMAP_ISO_SPLITRSHIFT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + TABDUAL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + CAPSDUAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, ENTERDUAL, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, ARRUP, TG(_SFX), \ + KC_LCTL, KC_LGUI, KC_LALT, SPACEDUAL, KC_RALT, ARRLEFT, ARRDOWN, ARRRIGHT), + + /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) + * ,-----------------------------------------------------------. + * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete| + * |-----------------------------------------------------------| + * | |Paus| Up| [ | ] | | | | ( | ) | | | | | + * |-----------------------------------------------------------| + * | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY | + * |-----------------------------------------------------------| + * | | | | | < | > | |M0 | | | | | Vol+ | | + * |-----------------------------------------------------------| + * | | | | |Alt |Prev|Vol-|Next| + * `-----------------------------------------------------------' + */ + [_SPC] = KEYMAP_ISO_SPLITRSHIFT( + KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, KC_PAUS, KC_UP, GER_BRC_L, GER_BRC_R, _______, _______, GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \ + _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \ + _______, _______, _______, _______, GER_ANG_L, GER_ANG_R, KC_SPACE, M(0), _______, _______, _______, _______, KC_VOLU, _______, \ + _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), + + /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) + * ,-----------------------------------------------------------. + * |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE + * |-----------------------------------------------------------| + * | | | | | | | | | { | } | | | | | + * |-----------------------------------------------------------| + * | | | | | | |Pos1|PgDn|PgUp|End| | |Retrn | + * |-----------------------------------------------------------| + * | | | | | | | |AF2| | | | | PgUp | | + * |-----------------------------------------------------------| + * | | | | |Alt |Pos1|PgDn|End | + * `-----------------------------------------------------------' + */ + [_TAB] = KEYMAP_ISO_SPLITRSHIFT( + KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \ + _______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), + + /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) + * ,-----------------------------------------------------------. + * |RSET| | | | | | | 7| 8| 9| | | |Backsp | + * |-----------------------------------------------------------| + * | | | | | | | | 4 | 5 | 6 | | | | \ | + * |-----------------------------------------------------------| + * | | L | L | | | | | 1 | 2 | 3 | | | Return | + * |-----------------------------------------------------------| + * | | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent + * |-----------------------------------------------------------| LED controlling + * |Ctrl|Win |Alt | |Alt |Left|Down|Right| + * `-----------------------------------------------------------' + */ + [_SFX] = KEYMAP_ISO_SPLITRSHIFT( + RESET, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, KC_BSPC, \ + _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, KC_BSLS, \ + _______, F(2), F(3), _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, XXXXXXX, KC_ENT, \ + _______, F(4), F(5), F(6), F(7), F(8), F(9), _______, _______, KC_0, _______, KC_SLSH, KC_UP, _______, \ + _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT), +}; + +enum function_id { + LAUNCH, + RGBLED_TOGGLE, +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_FUNCTION(LAUNCH), + [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + return (record->event.pressed ? + MACRO( D(RALT), T(SPC), U(RALT), END ) + :MACRO( END )); + break; + case 1: + return (record->event.pressed ? + MACRO( D(LALT), T(F2), U(LALT), END ) + :MACRO( END )); + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/amj60/keymaps/iso_split_rshift/readme.md b/keyboards/amj60/keymaps/iso_split_rshift/readme.md new file mode 100644 index 0000000000..2113d93e4d --- /dev/null +++ b/keyboards/amj60/keymaps/iso_split_rshift/readme.md @@ -0,0 +1,30 @@ +toneman77's custom spacefn Layout +===================== + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +# Features +* heavily modified ISO (!) layout with split right shift key +* spaceFn +* Dual-Role keys: +* + | Original key | when tapped | when held | + | ---------------- | ------------- | ------------- | + | Space | Space | layer change | + | Caps lock | Escape | Control | + | Tab | Tab | layer change | + | Enter | Enter | Control | + +* vim-style arrow keys on hjkl (spacefn layer) +* corresponding Home/PgDn/PgUp/End on hjkl (tab layer) +* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift +* more bonus arrow keys on wasd (spacefn layer) +* media keys prev/next/play/vol+/vol- (spacefn layer) +* firmware bootloader button +* additional brackets that only work in german layout due to horrible placement +in the default qwertz layout + + +### Additional Credits +* visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) (without the LED keys) diff --git a/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh new file mode 100755 index 0000000000..da5457e195 --- /dev/null +++ b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh @@ -0,0 +1,4 @@ +#!/bin/bash +git checkout amj60 # gets you on branch amj60 +git fetch origin # gets you up to date with origin +git merge origin/master diff --git a/keyboards/amj60/readme.md b/keyboards/amj60/readme.md new file mode 100644 index 0000000000..0896134e0c --- /dev/null +++ b/keyboards/amj60/readme.md @@ -0,0 +1,57 @@ +AMJ60 keyboard firmware +====================== +DIY/Assembled compact 60% keyboard. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/amj60 +folder. Once your dev env is setup, you'll be able to type `make` to generate +your .hex - you can then use `make dfu` to program your PCB once you hit the +reset button. + +Depending on which keymap you would like to use, you will have to compile +slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to +define your favorite layout yourself. To define your own keymap create file +named `<name>.c` in the keymaps folder, and see keymap document (you can find +in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with +`KEYMAP` option like: +`` +$ make KEYMAP=[default|jack|<name>] +`` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` +folder. + +## Variations +KEYMAP macros for the following layouts are available: + +* default, for all the available, possible keys +* ANSI, for 60% ANSI keyboard +* ISO +* ISO w/ split right shift key +* HHKB + +Remark: all but "ISO w/ split right shift key" are untested and were done to the best of my knowledge. + +### Original tmk firmware +The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ60). + +## Further information +Since information and documentation for this board are sparse, (at least for non-chinese speaking ppl) here is everything that could be found + +* [geekhack discussion](https://geekhack.org/index.php?topic=53070.0) +* [chinese discussion](https://www.v2ex.com/t/161887) +* Board has [dedicated pinouts](https://i.imgur.com/D0sWhyh.jpg?1) for a bluetooth module +* has pins for external power [picture](https://i.imgur.com/00VrtIp.jpg?1). +* most information comes from [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/32oonr/gh60_pcb_for_your_custom_keyboard/) diff --git a/keyboards/amj60/rules.mk b/keyboards/amj60/rules.mk new file mode 100644 index 0000000000..18403ac328 --- /dev/null +++ b/keyboards/amj60/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/arrow_pad/Makefile b/keyboards/arrow_pad/Makefile index 09fcf3e7a0..4e2a6f00fd 100644 --- a/keyboards/arrow_pad/Makefile +++ b/keyboards/arrow_pad/Makefile @@ -1,74 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= yes # USB Nkey Rollover -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/arrow_pad/readme.md b/keyboards/arrow_pad/readme.md index 5aa44cce54..d0d172272e 100644 --- a/keyboards/arrow_pad/readme.md +++ b/keyboards/arrow_pad/readme.md @@ -1,24 +1,133 @@ arrow_pad keyboard firmware ====================== +## Keyboard Info + +The ArrowPad is a wired conversion that can be made to any stand-alone keypad. It uses two main layers - a standard numpad, and a more advanced arrow cluster navigator. + +The first 24-key ArrowPad was handwired, but the PCB was wired as listed below. + +``` +<Chip Ref Des> pin <Pin #> +<Keycap Name> (Silkscreen Name if different) - <Switch Pin #> + + +Note: +U2 pin 2 is the Num Lock LED and is active low. + +U2 pin 1 +Clear (Num Lock) - 1 +Enter - 2 +Esc (ESC) - 2 + + +U2 pin 3 +- - 1 + +U2 pin 4 +7 - 2 +8 - 2 +9 - 2 + +U2 pin 5 +* - 2 +Delete (BACK SPACE) - 2 + +U2 pin 6 +1 - 2 +0 - 2 +. - 2 +, - 2 + +U2 pin 7 +4 - 2 +5 - 2 +6 - 2 + +U2 pin 8 +Tab - 2 += (/) - 2 + +U2 pin 13 +Delete (BACK SPACE) - 1 +9 - 1 +6 - 1 +3 - 1 +. - 1 + +U2 pin 14 +Tab - 1 +8 - 1 +5 - 1 +2 - 1 +0 - 1 + +U2 pin 15 +Esc (ESC) - 1 += (/) - 1 +/ (*) - 1 +7 - 1 +4 - 1 +1 - 1 ++ - 1 + +U2 pin 16 +Enter - 1 +* (<--) - 1 +, - 1 + +U2 pin 17 +Fn (#NAME?) - 1 +- - 2 +Clear (Num Lock) - 2 + +U2 pin 18 +Fn (#NAME?) - 2 +* (<--) - 2 ++ - 2 +3 - 2 +2 - 2 +``` + +More info can be found on [GeekHack](https://geekhack.org/index.php?topic=73632.msg1802497#msg1802497) + +The second ArrowPad was a conversion from a 21-key Genovation keypad. It used a 2 row x 11 column matrix. + +``` +#define KEYMAP( \ + KM_ESC, KM_TAB, KM_BSL, KM_ARR, \ + KM_NUM, KM_FSL, KM_AST, KM_MIN, \ + KM___7, KM___8, KM___9, ___PLS, \ + KM___4, KM___5, KM___6, KM_PLS, \ + KM___1, KM___2, KM___3, ___ENT, \ + KM___0, _____0, KM_DOT, KM_ENT \ +) { \ + { KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \ + { KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO, KM___0, KM_DOT, }, \ +} +``` + + ## Quantum MK Firmware For the full Quantum feature list, see [the parent readme.md](/readme.md). ## Building -Download or clone the whole firmware and navigate to the keyboards/arrow_pad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. +Download or clone the whole firmware and navigate to the keyboards/arrow_pad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|<name>] +$ make [default|pad_21|pad_24|<name>] ``` -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/arrow_pad/rules.mk b/keyboards/arrow_pad/rules.mk new file mode 100644 index 0000000000..3dca9b6ea7 --- /dev/null +++ b/keyboards/arrow_pad/rules.mk @@ -0,0 +1,70 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6
\ No newline at end of file diff --git a/keyboards/atomic/Makefile b/keyboards/atomic/Makefile index 08e9205cbf..4e2a6f00fd 100644 --- a/keyboards/atomic/Makefile +++ b/keyboards/atomic/Makefile @@ -1,73 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/atomic/keymaps/pvc/Makefile b/keyboards/atomic/keymaps/pvc/Makefile index 278407e6c9..c7c04485fc 100644 --- a/keyboards/atomic/keymaps/pvc/Makefile +++ b/keyboards/atomic/keymaps/pvc/Makefile @@ -1,7 +1,7 @@ -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality diff --git a/keyboards/atomic/keymaps/pvc/config.h b/keyboards/atomic/keymaps/pvc/config.h index 70353323b6..18a7253f2e 100644 --- a/keyboards/atomic/keymaps/pvc/config.h +++ b/keyboards/atomic/keymaps/pvc/config.h @@ -150,10 +150,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ /* disable debug print */ -//#define NO_DEBUG +#ifndef NO_DEBUG +# define NO_DEBUG +#endif /* disable print */ -//#define NO_PRINT +// #ifndef NO_PRINT +// # define NO_PRINT +// #endif + +/* Only print user print statements */ +#define USER_PRINT /* disable action features */ //#define NO_ACTION_LAYER diff --git a/keyboards/atomic/keymaps/pvc/keymap.c b/keyboards/atomic/keymaps/pvc/keymap.c index f16ec8a6ec..d10bfe3bfc 100644 --- a/keyboards/atomic/keymaps/pvc/keymap.c +++ b/keyboards/atomic/keymaps/pvc/keymap.c @@ -2,48 +2,59 @@ #include "action_layer.h" #include "eeconfig.h" #include "led.h" +#include "mousekey.h" #ifdef AUDIO_ENABLE #include "audio.h" #include "song_list.h" #endif -#define LAYER_QWERTY 0 -#define LAYER_COLEMAK 1 -#define LAYER_DVORAK 2 -#define LAYER_UPPER 3 -#define LAYER_LOWER 4 -#define LAYER_FUNCTION 5 -#define LAYER_MOUSE 6 -#define LAYER_ADJUST 7 - -#define MACRO_QWERTY 0 -#define MACRO_COLEMAK 1 -#define MACRO_DVORAK 2 -#define MACRO_UPPER 3 -#define MACRO_LOWER 4 -#define MACRO_FUNCTION 5 -#define MACRO_MOUSE 6 -#define MACRO_TIMBRE_1 7 -#define MACRO_TIMBRE_2 8 -#define MACRO_TIMBRE_3 9 -#define MACRO_TIMBRE_4 10 -#define MACRO_TEMPO_U 11 -#define MACRO_TEMPO_D 12 -#define MACRO_TONE_DEFAULT 13 -#define MACRO_MUSIC_TOGGLE 14 -#define MACRO_AUDIO_TOGGLE 16 -#define MACRO_INC_VOICE 18 -#define MACRO_DEC_VOICE 19 -#define MACRO_BACKLIGHT 20 -#define MACRO_BREATH_TOGGLE 21 -#define MACRO_BREATH_SPEED_INC 23 -#define MACRO_BREATH_SPEED_DEC 24 -#define MACRO_BREATH_DEFAULT 25 +enum keyboard_layers { + LAYER_QWERTY = 0, + LAYER_UPPER, + LAYER_LOWER, + LAYER_FUNCTION, + LAYER_MOUSE, + LAYER_ADJUST, +}; +enum keyboard_macros { + MACRO_QWERTY = 0, + MACRO_UPPER, + MACRO_LOWER, + MACRO_FUNCTION, + MACRO_MOUSE, + MACRO_TIMBRE_1, + MACRO_TIMBRE_2, + MACRO_TIMBRE_3, + MACRO_TIMBRE_4, + MACRO_TEMPO_U, + MACRO_TEMPO_D, + MACRO_TONE_DEFAULT, + MACRO_MUSIC_TOGGLE, + MACRO_AUDIO_TOGGLE, + MACRO_INC_VOICE, + MACRO_DEC_VOICE, + MACRO_BACKLIGHT, + MACRO_BREATH_TOGGLE, + MACRO_BREATH_SPEED_INC, + MACRO_BREATH_SPEED_DEC, + MACRO_BREATH_DEFAULT, + MACRO_MOUSE_MOVE_UL, + MACRO_MOUSE_MOVE_UR, + MACRO_MOUSE_MOVE_DL, + MACRO_MOUSE_MOVE_DR, + MACRO_HELP_1, + MACRO_HELP_2, + MACRO_HELP_3, + MACRO_HELP_4, + MACRO_HELP_5, + MACRO_HELP_6, + MACRO_HELP_7, + MACRO_HELP_8, + MACRO_HELP_9, +}; #define M_QWRTY M(MACRO_QWERTY) -#define M_COLMK M(MACRO_COLEMAK) -#define M_DVORK M(MACRO_DVORAK) #define M_UPPER M(MACRO_UPPER) #define M_LOWER M(MACRO_LOWER) #define M_FUNCT M(MACRO_FUNCTION) @@ -60,6 +71,19 @@ #define M_BSPDU M(MACRO_BREATH_SPEED_INC) #define M_BSPDD M(MACRO_BREATH_SPEED_DEC) #define M_BDFLT M(MACRO_BREATH_DEFAULT) +#define M_MS_UL M(MACRO_MOUSE_MOVE_UL) +#define M_MS_UR M(MACRO_MOUSE_MOVE_UR) +#define M_MS_DL M(MACRO_MOUSE_MOVE_DL) +#define M_MS_DR M(MACRO_MOUSE_MOVE_DR) +#define M_HELP1 M(MACRO_HELP_1) +#define M_HELP2 M(MACRO_HELP_2) +#define M_HELP3 M(MACRO_HELP_3) +#define M_HELP4 M(MACRO_HELP_4) +#define M_HELP5 M(MACRO_HELP_5) +#define M_HELP6 M(MACRO_HELP_6) +#define M_HELP7 M(MACRO_HELP_7) +#define M_HELP8 M(MACRO_HELP_8) +#define M_HELP9 M(MACRO_HELP_9) #define VC_UP M(MACRO_INC_VOICE) @@ -77,6 +101,7 @@ #define SC_ACLS LALT(KC_F4) #define SC_CCLS LCTL(KC_F4) +#define TG_NKRO MAGIC_TOGGLE_NKRO #define OS_SHFT KC_FN0 #define _______ KC_TRNS @@ -86,155 +111,126 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* QWERTY - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | CAPS | A | S | D | F | G | H | J | K | L | ; | ' | XXXXXX . ENTER | PG UP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | LCTRL | LWIN | FN | LALT | UPPER | XXXXXX . SPACE | LOWER | SHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [LAYER_QWERTY] = { // QWERTY - { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, - { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, - { KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, - { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, - { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, - }, - - /* COLEMAK - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | DEL | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | BACKSP | A | R | S | T | D | H | N | E | I | O | ' | XXXXXX . ENTER | PG UP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | LSHIFT | Z | X | C | V | B | K | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | LCTRL | LWIN | FN | LALT | UPPER | XXXXXX . SPACE | LOWER | SHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [LAYER_COLEMAK] = { // COLEMAK - { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, - { KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, - { KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, - { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, - { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, +/* LAYER = LAYER_QWERTY + .--------------------------------------------------------------------------------------------------------------------------------------. + | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BACKSP . BACKSP | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | CAP LK | A | S | D | F | G | H | J | K | L | ; | ' | ENTER . ENTER | PG UP | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | LSHIFT | Z | X | C | V | B | N | M | , | . | / | RSHIFT . RSHIFT | UP | PG DN | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | LCTRL | LWIN | FN | LALT | UPPER | SPACE . SPACE | LOWER | OSHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | + '--------------------------------------------------------------------------------------------------------------------------------------' +*/ +[LAYER_QWERTY] = { + { KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC }, + { KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_CAPS, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT , KC_ENT , KC_PGUP }, + { KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_RSFT, KC_UP , KC_PGDN }, + { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC , KC_SPC , M_LOWER, OS_SHFT, KC_RALT, KC_APP , KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT } }, - -/* DVORAK - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | [ | ] | XXXXXX . BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | ' | , | . | P | Y | F | G | C | R | L | / | = | \ | DEL | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | CAPS | A | O | E | U | I | D | H | T | N | S | - | XXXXXX . ENTER | PG UP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | LSHIFT | ; | Q | J | K | X | B | M | W | V | Z | XXXXXX . RSHIFT | UP | PG DN | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | LCTRL | LWIN | FN | LALT | UPPER | XXXXXX . SPACE | LOWER | SHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [LAYER_DVORAK] = { // DVORAK - { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_BSPC }, - { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DEL }, - { KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, KC_ENT, KC_PGUP }, - { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, - { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, - }, - -/* UPPER - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | PRINT | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | NUM LK | / | * | | NUM LK | SCR LK | XXXXXX . PAUSE | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | | F1 | F2 | F3 | F4 | | | 7 | 8 | 9 | - | | | | INS | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | CAP LK | F5 | F6 | F7 | F8 | | | 4 | 5 | 6 | + | | XXXXXX . | HOME | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | | F9 | F10 | F11 | F12 | | | 1 | 2 | 3 | ENTER | XXXXXX . | | END | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | | | | | | 0 | | RALT | . | ENTER | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [LAYER_UPPER] = { // UPPER - { KC_PSCR, M_BRTOG, M_BSPDU, M_BSPDD, M_BDFLT, XXXXXXX, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, XXXXXXX, XXXXXXX, KC_SLCK, KC_PAUS, KC_PAUS }, - { _______, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, _______, _______, _______, KC_INS }, - { KC_CAPS, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, XXXXXXX, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, ________________, KC_HOME }, - { _______, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, ________________, _______, KC_END }, - { _______, _______, _______, _______, _______, KC_KP_0, KC_KP_0, _______, KC_RALT, KC_PDOT, KC_PENT, _______, _______, _______, _______ }, - }, - -/* LOWER - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | | $ | { | [ | ( | % | # | ) | ] | } | @ | | | | INS | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | | ^ | * | + | - | ; | : | _ | ' | " | ` | | XXXXXX . | HOME | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | | | | & | ! | ~ | / | \ | = | < | > | ? | XXXXXX . | | END | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | | | | | | | | | | | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [LAYER_LOWER] = { // LOWER - { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ________________ }, - { _______, KC_DLR, KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT, _______, _______, _______, KC_INS }, - { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SCLN, KC_COLN, KC_UNDS, KC_QUOT, KC_DQT, KC_GRV, _______, ________________, KC_HOME }, - { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SLSH, KC_BSLS, KC_EQL, KC_LT, KC_GT, KC_QUES, ________________, _______, KC_END }, - { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______ }, - }, - - [LAYER_FUNCTION] = { // FUNCTION - { KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ________________ }, - { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, _______, KC_PAUS }, - { KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, KC_PSCR }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, KC_VOLU, KC_MUTE }, - { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT }, - }, - -#ifdef MOUSEKEY_ENABLE - - [LAYER_MOUSE] = { // MOUSE - { _______, KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX }, - { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, - { XXXXXXX, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX, KC_WH_U }, - { _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ________________, KC_MS_U, KC_WH_D }, - { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, - }, - -#endif - - [LAYER_ADJUST] = { // ADJUST - { _______, TIMBR_1, TIMBR_2, TIMBR_3, TIMBR_4, TMPO_UP, TMPO_DN, TMPO_DF, _______, _______, _______, MU_TOG, AU_TOG, ________________ }, - { _______, M_QWRTY, M_COLMK, M_DVORK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______ }, - { _______, _______, _______, _______, M_BACKL, RESET, _______, M_MOUSE, _______, _______, _______, ________________, MUV_IN, _______ }, - { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, MUV_DE, _______ }, - }, - - -/* - [LAYER_EMPTY] = { // LAYER - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________ }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______ }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______, _______ }, - { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______ }, - }, +/* LAYER = LAYER_UPPER + .--------------------------------------------------------------------------------------------------------------------------------------. + | PRINT | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | NUM LK | KP / | KP * | KP - | XXXXXX | XXXXXX | ______ . ______ | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | PAUSE | F1 | F2 | F3 | F4 | NUM LK | KP / | KP 7 | KP 8 | KP 9 | KP - | ______ | ______ | ______ | INS | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | F5 | F6 | F7 | F8 | CAP LK | KP * | KP 4 | KP 5 | KP 6 | KP + | ______ | ______ . ______ | HOME | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | F9 | F10 | F11 | F12 | SCR LK | KP 0 | KP 1 | KP 2 | KP 3 | KP ENT | ______ . ______ | ______ | END | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | ______ | ______ | ______ | UPPER | KP 0 . KP 0 | ______ | RALT | KP . | KP ENT | ______ | ______ | ______ | ______ | + '--------------------------------------------------------------------------------------------------------------------------------------' */ - +[LAYER_UPPER] = { + { KC_PSCR, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, XXXXXXX, XXXXXXX, _______, _______ }, + { KC_PAUS, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_NLCK, KC_PSLS, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, _______, _______, _______, KC_INS }, + { _______, KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_CAPS, KC_PAST, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, _______, _______, KC_HOME }, + { _______, KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_SLCK, KC_KP_0, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, _______, _______, _______, KC_END }, + { _______, _______, _______, _______, M_UPPER, KC_KP_0, KC_KP_0, _______, KC_RALT, KC_PDOT, KC_PENT, _______, _______, _______, _______ } +}, +/* LAYER = LAYER_LOWER + .--------------------------------------------------------------------------------------------------------------------------------------. + | PRINT | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | ______ . ______ | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | $ | { | [ | ( | % | # | ) | ] | } | @ | ______ | ______ | ______ | INS | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | ^ | * | + | - | / | \ | _ | ' | " | ` | ______ | ______ . ______ | HOME | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | | | & | ! | ~ | ; | : | = | < | > | ? | ______ . ______ | ______ | END | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | ______ | ______ | ______ | ______ | ______ . ______ | LOWER | ______ | ______ | ______ | ______ | ______ | ______ | ______ | + '--------------------------------------------------------------------------------------------------------------------------------------' +*/ +[LAYER_LOWER] = { + { KC_PSCR, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______ }, + { _______, KC_DLR , KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT , _______, _______, _______, KC_INS }, + { _______, KC_CIRC, KC_ASTR, KC_PLUS, KC_MINS, KC_SLSH, KC_BSLS, KC_UNDS, KC_QUOT, KC_DQT , KC_GRV , _______, _______, _______, KC_HOME }, + { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SCLN, KC_COLN, KC_EQL , KC_LT , KC_GT , KC_QUES, _______, _______, _______, KC_END }, + { _______, _______, _______, _______, _______, _______, _______, M_LOWER, _______, _______, _______, _______, _______, _______, _______ } +}, +/* LAYER = LAYER_FUNCTION + .--------------------------------------------------------------------------------------------------------------------------------------. + | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX . XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | F13 | F14 | F15 | F16 | NUM LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | F17 | F18 | F19 | F20 | SCR LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX . XXXXXX | XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | F21 | F22 | F23 | F24 | CAP LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | ______ . ______ | VOL UP | MUTE | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | ______ | FN | ______ | ______ | PLAY . PLAY | ______ | ______ | ______ | ______ | ______ | PREV | VOL DN | NEXT | + '--------------------------------------------------------------------------------------------------------------------------------------' +*/ +[LAYER_FUNCTION] = { + { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { XXXXXXX, KC_F13 , KC_F14 , KC_F15 , KC_F16 , KC_NLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { XXXXXXX, KC_F17 , KC_F18 , KC_F19 , KC_F20 , KC_SLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { _______, KC_F21 , KC_F22 , KC_F23 , KC_F24 , KC_CAPS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_VOLU, KC_MUTE }, + { _______, _______, M_FUNCT, _______, _______, KC_MPLY, KC_MPLY, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT } +}, +/* LAYER = LAYER_MOUSE + .--------------------------------------------------------------------------------------------------------------------------------------. + | ESC | MS AC0 | MS AC1 | MS AC2 | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX . XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MS UL | MS U | MS UR | XXXXXX | XXXXXX | XXXXXX | MS WHL | MS WHR | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | MS BT5 | MS BT4 | MS BT3 | MS BT2 | XXXXXX | XXXXXX | MS L | XXXXXX | MS R | XXXXXX | XXXXXX | XXXXXX . XXXXXX | MS WHU | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MS DL | MS D | MS DR | XXXXXX | ______ . ______ | MS U | MS WHD | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | ______ | ______ | ______ | ______ | MS BT1 . MS BT1 | ______ | ______ | ______ | ______ | ______ | MS L | MS D | MS R | + '--------------------------------------------------------------------------------------------------------------------------------------' +*/ +[LAYER_MOUSE] = { + { KC_ESC , KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_MS_UL, KC_MS_U, M_MS_UR, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_L, KC_WH_R }, + { XXXXXXX, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, KC_MS_L, XXXXXXX, KC_MS_R, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_U }, + { _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_MS_DL, KC_MS_D, M_MS_DR, XXXXXXX, _______, _______, KC_MS_U, KC_WH_D }, + { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R } +}, +/* LAYER = LAYER_ADJUST + .--------------------------------------------------------------------------------------------------------------------------------------. + | XXXXXX | HELP 1 | HELP 2 | HELP 3 | HELP 4 | HELP 5 | HELP 6 | HELP 7 | HELP 8 | HELP 9 | XXXXXX | MUSIC | AUDIO | XXXXXX . XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | BRTOG | BRSPD+ | BRSPD- | BRDFLT | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX . XXXXXX | XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | QWERTY | XXXXXX | XXXXXX | BACKLT | RESET | XXXXXX | MOUSE | XXXXXX | XXXXXX | XXXXXX | XXXXXX . XXXXXX | VOICE+ | XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | XXXXXX | XXXXXX | XXXXXX | UPPER | XXXXXX . XXXXXX | LOWER | XXXXXX | XXXXXX | XXXXXX | XXXXXX | TEMPO- | VOICE- | TEMPO+ | + '--------------------------------------------------------------------------------------------------------------------------------------' +*/ +[LAYER_ADJUST] = { + { XXXXXXX, M_HELP1, M_HELP2, M_HELP3, M_HELP4, M_HELP5, M_HELP6, M_HELP7, M_HELP8, M_HELP9, XXXXXXX, MU_TOG , AU_TOG , XXXXXXX, XXXXXXX }, + { XXXXXXX, M_BRTOG, M_BSPDU, M_BSPDD, M_BDFLT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { XXXXXXX, M_QWRTY, XXXXXXX, XXXXXXX, M_BACKL, RESET , XXXXXXX, M_MOUSE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MUV_IN , XXXXXXX }, + { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_UPPER, XXXXXXX, XXXXXXX, M_LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TMPO_DN, MUV_DE , TMPO_UP } +}, }; #ifdef AUDIO_ENABLE @@ -276,61 +272,101 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) switch(id) { - case MACRO_BREATH_TOGGLE: + case MACRO_HELP_1: if (record->event.pressed) { - breathing_toggle(); + uprintf("1"); } break; - case MACRO_BREATH_SPEED_INC: + case MACRO_HELP_2: if (record->event.pressed) { - breathing_speed_inc(1); + uprintf("2"); } break; - case MACRO_BREATH_SPEED_DEC: + case MACRO_HELP_3: if (record->event.pressed) { - breathing_speed_dec(1); + uprintf("3"); } break; - case MACRO_BREATH_DEFAULT: + case MACRO_HELP_4: if (record->event.pressed) { - breathing_defaults(); + uprintf("4"); } break; - case MACRO_QWERTY: + case MACRO_HELP_5: if (record->event.pressed) { - persistant_default_layer_set(1UL<<LAYER_QWERTY); - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, STACCATO); - #endif /* AUDIO_ENABLE */ + uprintf("5"); } break; - case MACRO_COLEMAK: + case MACRO_HELP_6: if (record->event.pressed) { - persistant_default_layer_set(1UL<<LAYER_COLEMAK); - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, STACCATO); - #endif /* AUDIO_ENABLE */ + uprintf("6"); } break; - case MACRO_DVORAK: + case MACRO_HELP_7: if (record->event.pressed) { - persistant_default_layer_set(1UL<<LAYER_DVORAK); - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, STACCATO); - #endif /* AUDIO_ENABLE */ + uprintf("7"); + } + break; + + case MACRO_HELP_8: + if (record->event.pressed) + { + uprintf("8"); + } + break; + + case MACRO_HELP_9: + if (record->event.pressed) + { + uprintf("9"); + } + break; + + case MACRO_BREATH_TOGGLE: + if (record->event.pressed) + { + breathing_toggle(); + } + break; + + case MACRO_BREATH_SPEED_INC: + if (record->event.pressed) + { + breathing_speed_inc(1); + } + break; + + case MACRO_BREATH_SPEED_DEC: + if (record->event.pressed) + { + breathing_speed_dec(1); + } + break; + + case MACRO_BREATH_DEFAULT: + if (record->event.pressed) + { + breathing_defaults(); + } + break; + + case MACRO_QWERTY: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_QWERTY); } break; diff --git a/keyboards/atomic/readme.md b/keyboards/atomic/readme.md index ab1e7ba1ff..674dcf113b 100644 --- a/keyboards/atomic/readme.md +++ b/keyboards/atomic/readme.md @@ -13,13 +13,14 @@ Download or clone the whole firmware and navigate to the keyboards/atomic folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|<name>] +$ make [default|jack|<name>] ``` Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/atomic/rules.mk b/keyboards/atomic/rules.mk new file mode 100644 index 0000000000..d0f3a3a1c0 --- /dev/null +++ b/keyboards/atomic/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
\ No newline at end of file diff --git a/keyboards/atreus/Makefile b/keyboards/atreus/Makefile index 95ee1d4d7b..4e2a6f00fd 100644 --- a/keyboards/atreus/Makefile +++ b/keyboards/atreus/Makefile @@ -1,88 +1,3 @@ - - -ifdef TEENSY2 - OPT_DEFS += -DATREUS_TEENSY2 - ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex -else - OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER - ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) -endif - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - -USB ?= /dev/cu.usbmodem1411 - -upload: build - $(ATRUES_UPLOAD_COMMAND) -
\ No newline at end of file +endif
\ No newline at end of file diff --git a/keyboards/atreus/config.h b/keyboards/atreus/config.h index 624d90188c..51162cde3a 100644 --- a/keyboards/atreus/config.h +++ b/keyboards/atreus/config.h @@ -37,7 +37,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // COLS: Left to right, ROWS: Top to bottom #if defined(ATREUS_ASTAR) # define MATRIX_ROW_PINS { D0, D1, D3, D2 } +#if defined(PCBDOWN) +# define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 } +#else # define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 } +#endif # define UNUSED_PINS #elif defined(ATREUS_TEENSY2) # define MATRIX_ROW_PINS { D0, D1, D2, D3 } diff --git a/keyboards/atreus/keymaps/classic/keymap.c b/keyboards/atreus/keymaps/classic/keymap.c new file mode 100644 index 0000000000..6ca0b2077d --- /dev/null +++ b/keyboards/atreus/keymaps/classic/keymap.c @@ -0,0 +1,48 @@ +#include "atreus.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _RS 1 +#define _LW 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QW] = { /* Qwerty */ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN }, + {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH }, + {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT } +}, +[_RS] = { /* [> RAISE <] */ + {KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR}, + {KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, KC_TRNS, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS}, + {KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_LALT, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS}, + {TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL} +}, +[_LW] = { /* [> LOWER <] */ + {KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_TRNS, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10}, + {KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_TRNS, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LALT, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12}, + {KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, DF(_QW), KC_TRNS, KC_TRNS, RESET} +}}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atreus/keymaps/default/keymap.c b/keyboards/atreus/keymaps/default/keymap.c index 1c4280ff56..04ad66fed8 100644 --- a/keyboards/atreus/keymaps/default/keymap.c +++ b/keyboards/atreus/keymaps/default/keymap.c @@ -18,17 +18,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH }, {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT } }, +/* + * ! @ up { } || pgup 7 8 9 * + * # left down right $ || pgdn 4 5 6 + + * [ ] ( ) & || ` 1 2 3 \ + * lower insert super shift bksp ctrl || alt space fn . 0 = + */ [_RS] = { /* [> RAISE <] */ - {KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR}, - {KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, KC_TRNS, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS}, - {KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_LALT, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS}, + {KC_EXLM, KC_AT, KC_UP, KC_LCBR, KC_RCBR, KC_TRNS, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR}, + {KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR, KC_TRNS, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS}, + {KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_LALT, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS}, {TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL} }, +/* + * insert home up end pgup || up F7 F8 F9 F10 + * del left down right pgdn || down F4 F5 F6 F11 + * volup reset || F1 F2 F3 F12 + * voldn super shift bksp ctrl || alt space L0 prtsc scroll pause + */ [_LW] = { /* [> LOWER <] */ {KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_TRNS, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10}, {KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_TRNS, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LALT, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12}, - {KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, DF(_QW), KC_TRNS, KC_TRNS, RESET} + {KC_TRNS, KC_VOLU, KC_TRNS, KC_TRNS, RESET, KC_LALT, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12}, + {KC_TRNS, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, DF(_QW), KC_PSCR, KC_SLCK, KC_PAUS} }}; const uint16_t PROGMEM fn_actions[] = { diff --git a/keyboards/atreus/keymaps/erlandsona/config.h b/keyboards/atreus/keymaps/erlandsona/config.h new file mode 100644 index 0000000000..d9eb1903ed --- /dev/null +++ b/keyboards/atreus/keymaps/erlandsona/config.h @@ -0,0 +1,96 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + + +/* Make Overloaded Keys switch faster */ +#define TAPPING_TERM 150 + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Technomancy +#define PRODUCT Atreus +#define DESCRIPTION q.m.k. keyboard firmware for Atreus + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +// Change this to how you wired your keyboard +// COLS: Left to right, ROWS: Top to bottom +#if defined(ATREUS_ASTAR) +# define MATRIX_ROW_PINS { D0, D1, D3, D2 } +#if defined(PCBDOWN) +# define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 } +#else +# define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 } +#endif +# define UNUSED_PINS +#elif defined(ATREUS_TEENSY2) +# define MATRIX_ROW_PINS { D0, D1, D2, D3 } +# define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 } +# define UNUSED_PINS +#endif + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/atreus/keymaps/erlandsona/keymap.c b/keyboards/atreus/keymaps/erlandsona/keymap.c new file mode 100644 index 0000000000..32c8826e02 --- /dev/null +++ b/keyboards/atreus/keymaps/erlandsona/keymap.c @@ -0,0 +1,61 @@ +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, + +#include "atreus.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define BASE 0 +#define NUMS 1 +#define MOUS 2 + +// Some quick aliases, just to make it look pretty +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[BASE] = KEYMAP( /* Qwerty */ + KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , + KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , + SFT_T(KC_Z), KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , SFT_T(KC_QUOT), + KC_LCTL , KC_LALT, KC_LALT, KC_LGUI, KC_BSPC, KC_ESC, KC_ENT, KC_SPC, F(NUMS), KC_RALT, KC_SLSH, KC_BSLS ), + +[NUMS] = KEYMAP( /* Numbers / Arrows / Symbols */ + KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_LPRN, KC_RPRN, KC_MINS, KC_EQL , KC_LBRC, + KC_TAB , KC_5 , KC_6 , KC_7 , KC_8 , KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_RBRC, + _______, KC_9 , KC_0 , KC_DOT , KC_COMM, KC_HOME, KC_PGDN, KC_PGUP, KC_END , _______, + _______, _______, _______, _______, KC_DEL , F(MOUS), _______, _______, _______, _______, _______, _______), + +[MOUS] = KEYMAP( /* Mouse and Media Keys */ + KC_SLCK, KC_PAUSE, KC_F11 , KC_F10 , KC_F9 , KC_F8 , KC_F7 , KC_F6 , KC_F5 , KC_F4, + KC_VOLD, KC_ACL0 , KC_ACL1, KC_ACL2, KC_VOLU, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_F3, + KC_MUTE, KC_MPRV , KC_MPLY, KC_MNXT, KC_MUTE, KC_WH_R, KC_WH_U, KC_WH_D, KC_WH_L, KC_F2, + _______, _______ , _______, _______, _______, _______, _______, KC_BTN1, F(BASE), RESET , KC_F12 , KC_F1) +}; + + +// I prefer this layer switching strategy to the TG and MO functions. +// so that I can get out of mouse mode just by tapping/holding my base layer FN key. +const uint16_t PROGMEM fn_actions[] = { + [BASE] = ACTION_LAYER_OFF(2, 1), // switch back to layer 0 + [NUMS] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay + [MOUS] = ACTION_LAYER_ON(2, 1) // switch to layer 2 +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atreus/keymaps/replicaJunction/atreus-replica-base-colemakdh.png b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-base-colemakdh.png Binary files differnew file mode 100644 index 0000000000..4640f9f529 --- /dev/null +++ b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-base-colemakdh.png diff --git a/keyboards/atreus/keymaps/replicaJunction/atreus-replica-extend.png b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-extend.png Binary files differnew file mode 100644 index 0000000000..08c2e6140c --- /dev/null +++ b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-extend.png diff --git a/keyboards/atreus/keymaps/replicaJunction/atreus-replica-function.png b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-function.png Binary files differnew file mode 100644 index 0000000000..34ad03decd --- /dev/null +++ b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-function.png diff --git a/keyboards/atreus/keymaps/replicaJunction/atreus-replica-game.png b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-game.png Binary files differnew file mode 100644 index 0000000000..14ae35b54e --- /dev/null +++ b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-game.png diff --git a/keyboards/atreus/keymaps/replicaJunction/atreus-replica-num.png b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-num.png Binary files differnew file mode 100644 index 0000000000..6598acb27b --- /dev/null +++ b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-num.png diff --git a/keyboards/atreus/keymaps/replicaJunction/config.h b/keyboards/atreus/keymaps/replicaJunction/config.h new file mode 100644 index 0000000000..437aa662c8 --- /dev/null +++ b/keyboards/atreus/keymaps/replicaJunction/config.h @@ -0,0 +1,94 @@ +/* +Config file - Atreus QMK with replicaJunction layout + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Technomancy +#define PRODUCT Atreus +#define DESCRIPTION q.m.k. keyboard firmware for Atreus + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +// Change this to how you wired your keyboard +// COLS: Left to right, ROWS: Top to bottom +#if defined(ATREUS_ASTAR) +# define MATRIX_ROW_PINS { D0, D1, D3, D2 } +# define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 } +# define UNUSED_PINS +#elif defined(ATREUS_TEENSY2) +# define MATRIX_ROW_PINS { D0, D1, D2, D3 } +# define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 } +# define UNUSED_PINS +#endif + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +// Default: 5 +#define DEBOUNCING_DELAY 6 + +// I don't have any locking keys, so I don't need these features + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Prevent modifiers from sticking when switching layers */ +#define PREVENT_STUCK_MODIFIERS + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/atreus/keymaps/replicaJunction/keymap.c b/keyboards/atreus/keymaps/replicaJunction/keymap.c new file mode 100644 index 0000000000..52d3677fa7 --- /dev/null +++ b/keyboards/atreus/keymaps/replicaJunction/keymap.c @@ -0,0 +1,107 @@ +/* + * Keyboard: Atreus + * Keymap: replicaJunction + * Version: 0.3 + * + * This keymap is designed to complement my Ergodox keyboard layout, found in keyboards/ergodox_ez. + * The Atreus keyboard is a 40% board whose design was heavily influenced by the Ergodox. I now + * have both keyboards, so I've designed these layouts in an effort to make switching between the + * two as easy as possible. + * + * Clearly, the Atreus is the limiting factor in this equation, so I've taken heavy advantage of + * function and dual-role keys. + * + * The default key layout in this keymap is Colemak-ModDH. Information on that layout can be found + * here: https://colemakmods.github.io/mod-dh/ + */ + +#include "atreus.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +// Note that whatever is set as layer 0 will be the default layer of the keyboard. + +#define _CO 0 // Colemak +#define _QW 1 // QWERTY +#define _GA 2 // Gaming +#define _EX 3 // Extend +#define _NU 4 // Numpad +#define _FN 5 // Function + +// Some quick aliases, just to make it look pretty +#define _______ KC_TRNS +#define KCX_CA LCTL(KC_LALT) +#define KCX_CS LCTL(KC_LSFT) +#define KCX_CSA LCTL(LSFT(KC_LALT)) +#define KCX_LST LSFT(KC_TAB) +#define KX_COPY LCTL(KC_C) +#define KX_CUT LCTL(KC_X) +#define KX_PAST LCTL(KC_V) +#define KX_UNDO LCTL(KC_Z) + +; // This doesn't do anything. It's just for VSCode because its syntax highlighting is weird for the above #define statements. + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_CO] = KEYMAP( + KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, + KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, + SFT_T(KC_Z), KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, KC_DOT, SFT_T(KC_SLSH), + KC_ESC, KC_LGUI, KC_TAB, KC_LALT, KC_BSPC, CTL_T(KC_DEL), ALT_T(KC_ENT), LT(_NU, KC_SPC), MO(_EX), KC_MINS, KC_QUOT, KC_EQL +), + +[_QW] = KEYMAP( /* Qwerty */ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH), + KC_ESC, KC_LGUI, KC_TAB, KC_LALT, KC_BSPC, CTL_T(KC_DEL), ALT_T(KC_ENT), LT(_NU, KC_SPC), MO(_EX), KC_MINS, KC_QUOT, KC_EQL +), + +[_EX] = KEYMAP( /* Extend */ + KC_CAPS, _______, _______, _______, _______, KC_PGUP, KC_HOME, KC_UP, KC_END, KC_DEL, + _______, KC_LGUI, KC_LALT, KC_LCTL, _______, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSPC, + _______, KX_CUT, KX_COPY, _______, KX_PAST, _______, KC_TAB, KCX_LST, _______, KC_INSERT, + _______, _______, _______, _______, _______, _______, _______, KC_SPC, _______, _______, _______, KC_PSCR +), + +[_NU] = KEYMAP( /* Numbers and symbols */ + KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_AMPR, KC_SLSH, KC_7, KC_8, KC_9, KC_ASTR, + KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_TILD, KC_PIPE, KC_4, KC_5, KC_6, KC_MINS, + KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_GRV, KC_BSLS, KC_1, KC_2, KC_3, KC_PLUS, + _______, TG(_GA), _______, MO(_FN), _______, _______, _______, _______, KC_0, KC_DOT, KC_EQL, _______ +), + +[_FN] = KEYMAP( /* Functions */ + KC_DEL, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, KC_F7, KC_F8, KC_F9, KC_F10, + KC_BSPC, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, _______, KC_F4, KC_F5, KC_F6, KC_F11, + _______, KC_VOLU, KC_MUTE, KC_VOLD, KC_MPLY, _______, KC_F1, KC_F2, KC_F3, KC_F12, + _______, _______, _______, _______, KC_MSTP, _______, _______, _______, KC_NO, DF(_CO), DF(_QW), RESET +), + +[_GA] = KEYMAP( /* Gaming */ + _______, _______, _______, _______, _______, _______, KC_WH_U, KC_MS_U, KC_WH_D, _______, + _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, + KC_Z, _______, _______, _______, _______, KC_BTN3, _______, KC_MS_D, _______, _______, + _______, TG(_GA), _______, KC_LSFT, KC_SPC, KC_BSPC, KC_BTN2, KC_BTN1, _______, _______, _______, _______ +)}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atreus/keymaps/replicaJunction/readme.md b/keyboards/atreus/keymaps/replicaJunction/readme.md new file mode 100644 index 0000000000..21af48e8fd --- /dev/null +++ b/keyboards/atreus/keymaps/replicaJunction/readme.md @@ -0,0 +1,57 @@ +# replicaJunction - Atreus Layout # + +This layout is designed to make the absolute most out of the Atreus 40% keyboard. + +I was enchanted with the idea of the Atreus keyboard after using my Ergodox for several months. I wanted something of a similar form factor that was easily portable, so I could bring and transport a keyboard to my workplace without much hassle. After building the Atreus keyboard, though, I realized very quickly that the 40% form factor requires a lot more creativity than a full-size keyboard (even one as strangely-shaped as the Ergodox). + +The default Atreus keyboard layout provides all the necessary keys in order to function with the keyboard, but as a programmer, I needed quicker access to just about everything. I noticed that the default layer didn't include any dual-role keys, and so I started on my journey to build my perfect layout for the Atreus. + +I won't claim that this layout is perfect for everyone. It does make several significant changes from the "normal" Atreus layout. In my own use, though, I've found this keyboard turbocharges my Atreus, and gives it the power of a full-size keyboard without the size. + +## Base Layer ## + + + +The letters on this layout are arranged in the [Colemak Mod-DH layout](https://colemakmods.github.io/mod-dh/). + +Note that there are four dual-purpose keys: Shift (Backspace), Ctrl (Delete), Alt (Enter), and Space (Number layer). In QMK, these dual-role keys can be made to hold their primary key by double-tapping the key and holding on the second tap. For example, if I wanted to insert a long string of Spaces, I would tap the Space key, then tap it again and hold. A single press and hold would trigger the secondary function of the key instead. + +The secondary Alt on the left bottom row exists to provide a single-hand Alt+Tab shortcut, which would take two rows otherwise. + +## Extend Layer ## + + + +This layout is designed primarily for keyboard navigation. Arrow keys are easily accessible under the right hand (a welcome change from the original Atreus layout, which places them under the left hand), along with Home/End and PgUp/PgDn. + +Modifiers are also placed under the home row of the left hand. One of the single keyboard actions I use most is Shift+Ctrl+Left/Right to select a whole word; this layer makes those keypresses simple by adding the Ctrl key in an easy-to-reach location. + +For the common Ctrl shortcuts, I also added some hotkeys to this layer over the letter keys they are associated with. This gives the Extend key some extra utility by letting it "feel" like a Ctrl key in some cases. + +The Space key exists to prevent going from this layer directly into the Number layer. Similarly, the Shift key on the left pinky helps make sure that the normal letter (Z) doesn't fire. + +## Number and Symbol Layer ## + + + +This layer provides the only way of accessing number keys on this keyboard, since it's too small for its own number row. Note that even though they are laid out in the number pad fashion, they send the "regular" number keystrokes. Games and programs that specifically use NumPad keys are not supported in this layout at the moment. + +This layer also provides plenty of symbol shortcuts. Most of these can be accessed through other means (like Shift+8 for the asterisk), but having shortcut keys to them makes for one less keypress, which adds up quickly when using these symbols on a regular basis. I've been through many revisions of this concept on my Ergodox as well as the Atreus, and I've finally arrived at this layout as the one that provides the symbols I need most frequently in places I can think to expect them. The Ordinary layout from the Ergodox-EZ keyboard in this repository was a large influence in this design. + +## Function Layer ## + + + +Function keys (F1-F12) are on this layer, as well as some more generic "functions" such as media keys. I've also set up a mirror image of the arrows from the Extend layer in case I need to use these with my left hand, but I don't do this very often. + +The reset key is on this layer, as well as a toggle from Colemak to QWERTY and back. The QWERTY layer is not currently documented, but it is functionally identical to the base layer except for letter positions. + +## Gaming Layer ## + + + +This is a small layer developed to allow some simple gameplay without a mouse. This layer is a toggle (from the Number layer), so it is designed to stay on while in use. + +The keys on the left hand bring Space into the left thumb's reach, as well as overriding the dual-role Shift with its standard function (Z in both QWERTY and in Colemak). This allows easy Shift presses without blocking the Z key, commonly used in games. + +I would probably not consider this a hard-core gaming keyboard, and this layout does have the huge problem of blocking access to the number keys, but for more casual games, it plays quite well. I've used it quite a bit on Minecraft, for example, and I'm quite pleased with it.
\ No newline at end of file diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..b418cc9b5e --- /dev/null +++ b/keyboards/atreus/keymaps/xyverz/keymap.c @@ -0,0 +1,89 @@ +// This is the personal keymap of Ian Sterling (@xyverz). It is based on the keymap by +// Chris Gerber (@gerbercj), with the addition of persistent layers like the Planck and +// Preonic keyboards by Jack Humbert. + +#include "atreus.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DV 0 +#define _QW 1 +#define _CM 2 +#define _L1 3 +#define _L2 4 + +// Macro name shortcuts +#define DVORAK M(_DV) +#define QWERTY M(_QW) +#define COLEMAK M(_CM) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DV] = { /* Dvorak */ + {KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_NO, KC_F, KC_G, KC_C, KC_R, KC_L }, + {KC_A, KC_O, KC_E, KC_U, KC_I, KC_NO, KC_D, KC_H, KC_T, KC_N, KC_S }, + {SFT_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, CTL_T(KC_DEL), KC_B, KC_M, KC_W, KC_V, SFT_T(KC_Z) }, + {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_SLSH, KC_EQL} + }, + [_QW] = { /* Qwerty */ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, + {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH) }, + {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT} + }, + [_CM] = { /* Colemak */ + {KC_Q, KC_W, KC_F, KC_P, KC_G, KC_NO, KC_J, KC_L, KC_U, KC_Y, KC_SCLN}, + {KC_A, KC_R, KC_S, KC_T, KC_D, KC_NO, KC_H, KC_N, KC_E, KC_I, KC_O }, + {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_K, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH) }, + {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT} + }, + [_L1] = { /* LAYER 1 */ + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0 }, + {KC_TAB, KC_INS, KC_UP, KC_DEL, KC_HOME, KC_NO, KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL }, + {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS}, + {KC_TRNS, KC_GRV, KC_LGUI, KC_TRNS, KC_DEL, KC_LALT, KC_SPC, KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT } + }, + [_L2] = { /* LAYER 2 */ + {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_PLUS}, + {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12 }, + {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET} + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md index 734f58f0f0..a4077668e3 100644 --- a/keyboards/atreus/readme.md +++ b/keyboards/atreus/readme.md @@ -174,13 +174,14 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|<name>] +$ make [default|jack|<name>] ``` Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk new file mode 100644 index 0000000000..3a00993bd5 --- /dev/null +++ b/keyboards/atreus/rules.mk @@ -0,0 +1,82 @@ + + +ifdef TEENSY2 + OPT_DEFS += -DATREUS_TEENSY2 + ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +else + OPT_DEFS += -DATREUS_ASTAR + OPT_DEFS += -DCATERINA_BOOTLOADER + ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) +endif + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +USB ?= /dev/cu.usbmodem1411 + +upload: build + $(ATREUS_UPLOAD_COMMAND) diff --git a/keyboards/bantam44/Makefile b/keyboards/bantam44/Makefile index 03893dbf89..4e2a6f00fd 100644 --- a/keyboards/bantam44/Makefile +++ b/keyboards/bantam44/Makefile @@ -1,72 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - +endif
\ No newline at end of file diff --git a/keyboards/bantam44/readme.md b/keyboards/bantam44/readme.md index 89d7f9d053..462f67c124 100644 --- a/keyboards/bantam44/readme.md +++ b/keyboards/bantam44/readme.md @@ -12,13 +12,14 @@ Download or clone the whole firmware and navigate to the keyboards/Bantam44 fold Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|<name>] +$ make [default|jack|<name>] ``` Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file diff --git a/keyboards/bantam44/rules.mk b/keyboards/bantam44/rules.mk new file mode 100644 index 0000000000..baa0e9e7a2 --- /dev/null +++ b/keyboards/bantam44/rules.mk @@ -0,0 +1,67 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/chibios_test/Makefile b/keyboards/chibios_test/Makefile index d9f2b8b83b..4b07a62343 100644 --- a/keyboards/chibios_test/Makefile +++ b/keyboards/chibios_test/Makefile @@ -1,14 +1,5 @@ SUBPROJECT_DEFAULT = stm32_f072_onekey -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE ?= yes # Mouse keys -EXTRAKEY_ENABLE ?= yes # Audio control and System control -CONSOLE_ENABLE ?= yes # Console for debug -COMMAND_ENABLE ?= yes # Commands for debug and configuration -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover -CUSTOM_MATRIX ?= yes # Custom matrix file - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c index 31319ef575..2809c9d184 100644 --- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c +++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c @@ -1,49 +1,49 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
+/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +#if HAL_USE_PAL || defined(__DOXYGEN__) +const PALConfig pal_default_config = +{ + {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, + {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, + {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, + {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, + {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, +}; +#endif + +/* + * Early initialization code. + * This initialization must be performed just after stack setup and before + * any other initialization. + */ +void __early_init(void) { + + stm32_clock_init(); +} + +/* + * Board-specific initialization code. + */ +void boardInit(void) { +} diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h index 7253e77826..b31d74307b 100644 --- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h +++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h @@ -1,166 +1,166 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a Generic STM32F103 board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_GENERIC_STM32_F103
-#define BOARD_NAME "Generic STM32F103x board"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F103xB
-
-/*
- * IO pins assignments
- */
-
-/* on-board */
-
-#define GPIOC_LED 13
-#define GPIOD_OSC_IN 0
-#define GPIOD_OSC_OUT 1
-
-/* In case your board has a "USB enable" hardware
- controlled by a pin, define it here. (It could be just
- a 1.5k resistor connected to D+ line.)
-*/
-/*
-#define GPIOB_USB_DISC 10
-*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA2 - Alternate output (USART2 TX).
- * PA3 - Normal input (USART2 RX).
- * PA9 - Alternate output (USART1 TX).
- * PA10 - Normal input (USART1 RX).
- */
-#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB10 - Push Pull output (USB switch).
- */
-#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC13 - Push Pull output (LED).
- */
-#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0 - Normal input (XTAL).
- * PD1 - Normal input (XTAL).
- */
-#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
-#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
-#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-/* The point is that most of the generic STM32F103* boards
- have a 1.5k resistor connected on one end to the D+ line
- and on the other end to some pin. Or even a slightly more
- complicated "USB enable" circuit, controlled by a pin.
- That should go here.
-
- However on some boards (e.g. one that I have), there's no
- such hardware. In which case it's better to not do anything.
-*/
-/*
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-/*
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
+/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * Setup for a Generic STM32F103 board. + */ + +/* + * Board identifier. + */ +#define BOARD_GENERIC_STM32_F103 +#define BOARD_NAME "Generic STM32F103x board" + +/* + * Board frequencies. + */ +#define STM32_LSECLK 32768 +#define STM32_HSECLK 8000000 + +/* + * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. + */ +#define STM32F103xB + +/* + * IO pins assignments + */ + +/* on-board */ + +#define GPIOC_LED 13 +#define GPIOD_OSC_IN 0 +#define GPIOD_OSC_OUT 1 + +/* In case your board has a "USB enable" hardware + controlled by a pin, define it here. (It could be just + a 1.5k resistor connected to D+ line.) +*/ +/* +#define GPIOB_USB_DISC 10 +*/ + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * + * The digits have the following meaning: + * 0 - Analog input. + * 1 - Push Pull output 10MHz. + * 2 - Push Pull output 2MHz. + * 3 - Push Pull output 50MHz. + * 4 - Digital input. + * 5 - Open Drain output 10MHz. + * 6 - Open Drain output 2MHz. + * 7 - Open Drain output 50MHz. + * 8 - Digital input with PullUp or PullDown resistor depending on ODR. + * 9 - Alternate Push Pull output 10MHz. + * A - Alternate Push Pull output 2MHz. + * B - Alternate Push Pull output 50MHz. + * C - Reserved. + * D - Alternate Open Drain output 10MHz. + * E - Alternate Open Drain output 2MHz. + * F - Alternate Open Drain output 50MHz. + * Please refer to the STM32 Reference Manual for details. + */ + +/* + * Port A setup. + * Everything input with pull-up except: + * PA2 - Alternate output (USART2 TX). + * PA3 - Normal input (USART2 RX). + * PA9 - Alternate output (USART1 TX). + * PA10 - Normal input (USART1 RX). + */ +#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ +#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ +#define VAL_GPIOAODR 0xFFFFFFFF + +/* + * Port B setup. + * Everything input with pull-up except: + * PB10 - Push Pull output (USB switch). + */ +#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ +#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ +#define VAL_GPIOBODR 0xFFFFFFFF + +/* + * Port C setup. + * Everything input with pull-up except: + * PC13 - Push Pull output (LED). + */ +#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ +#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ +#define VAL_GPIOCODR 0xFFFFFFFF + +/* + * Port D setup. + * Everything input with pull-up except: + * PD0 - Normal input (XTAL). + * PD1 - Normal input (XTAL). + */ +#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ +#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ +#define VAL_GPIODODR 0xFFFFFFFF + +/* + * Port E setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ +#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ +#define VAL_GPIOEODR 0xFFFFFFFF + +/* + * USB bus activation macro, required by the USB driver. + */ +/* The point is that most of the generic STM32F103* boards + have a 1.5k resistor connected on one end to the D+ line + and on the other end to some pin. Or even a slightly more + complicated "USB enable" circuit, controlled by a pin. + That should go here. + + However on some boards (e.g. one that I have), there's no + such hardware. In which case it's better to not do anything. +*/ +/* +#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) +*/ +#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); + +/* + * USB bus de-activation macro, required by the USB driver. + */ +/* +#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) +*/ +#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* _BOARD_H_ */ diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk index d692c0ee46..48e0e51fe6 100644 --- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk +++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk @@ -1,5 +1,5 @@ -# List of all the board related files.
-BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
-
-# Required include directories
-BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103
+# List of all the board related files. +BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c + +# Required include directories +BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103 diff --git a/keyboards/chibios_test/ld/MKL26Z64.ld b/keyboards/chibios_test/ld/MKL26Z64.ld index fb141f888c..c4ca8b874c 100644 --- a/keyboards/chibios_test/ld/MKL26Z64.ld +++ b/keyboards/chibios_test/ld/MKL26Z64.ld @@ -1,105 +1,105 @@ -/*
- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
- * (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * KL26Z64 memory setup.
- */
-MEMORY
-{
- flash0 : org = 0x00000000, len = 0x100
- flash1 : org = 0x00000400, len = 0x10
- flash2 : org = 0x00000410, len = 62k - 0x410
- flash3 : org = 0x0000F800, len = 2k
- flash4 : org = 0x00000000, len = 0
- flash5 : org = 0x00000000, len = 0
- flash6 : org = 0x00000000, len = 0
- flash7 : org = 0x00000000, len = 0
- ram0 : org = 0x1FFFF800, len = 8k
- ram1 : org = 0x00000000, len = 0
- ram2 : org = 0x00000000, len = 0
- ram3 : org = 0x00000000, len = 0
- ram4 : org = 0x00000000, len = 0
- ram5 : org = 0x00000000, len = 0
- ram6 : org = 0x00000000, len = 0
- ram7 : org = 0x00000000, len = 0
-}
-
-/* Flash region for the configuration bytes.*/
-SECTIONS
-{
- .cfmprotect : ALIGN(4) SUBALIGN(4)
- {
- KEEP(*(.cfmconfig))
- } > flash1
-}
-
-/* For each data/text section two region are defined, a virtual region
- and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash2);
-REGION_ALIAS("XTORS_FLASH_LMA", flash2);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash2);
-REGION_ALIAS("TEXT_FLASH_LMA", flash2);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash2);
-REGION_ALIAS("RODATA_FLASH_LMA", flash2);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash2);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
- of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
- the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash2);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-__eeprom_workarea_start__ = ORIGIN(flash3);
-__eeprom_workarea_size__ = LENGTH(flash3);
-__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld
+/* + * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com + * (C) 2016 flabbergast <s3+flabbergast@sdfeu.org> + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/* + * KL26Z64 memory setup. + */ +MEMORY +{ + flash0 : org = 0x00000000, len = 0x100 + flash1 : org = 0x00000400, len = 0x10 + flash2 : org = 0x00000410, len = 62k - 0x410 + flash3 : org = 0x0000F800, len = 2k + flash4 : org = 0x00000000, len = 0 + flash5 : org = 0x00000000, len = 0 + flash6 : org = 0x00000000, len = 0 + flash7 : org = 0x00000000, len = 0 + ram0 : org = 0x1FFFF800, len = 8k + ram1 : org = 0x00000000, len = 0 + ram2 : org = 0x00000000, len = 0 + ram3 : org = 0x00000000, len = 0 + ram4 : org = 0x00000000, len = 0 + ram5 : org = 0x00000000, len = 0 + ram6 : org = 0x00000000, len = 0 + ram7 : org = 0x00000000, len = 0 +} + +/* Flash region for the configuration bytes.*/ +SECTIONS +{ + .cfmprotect : ALIGN(4) SUBALIGN(4) + { + KEEP(*(.cfmconfig)) + } > flash1 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash2); +REGION_ALIAS("XTORS_FLASH_LMA", flash2); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash2); +REGION_ALIAS("TEXT_FLASH_LMA", flash2); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash2); +REGION_ALIAS("RODATA_FLASH_LMA", flash2); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash2); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash2); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +__eeprom_workarea_start__ = ORIGIN(flash3); +__eeprom_workarea_size__ = LENGTH(flash3); +__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld index 00613328ed..f9bfe9c005 100644 --- a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld +++ b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld @@ -1,88 +1,88 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * ST32F103xB memory setup for use with the maplemini bootloader.
- * You will have to
- * #define CORTEX_VTOR_INIT 0x5000
- * in your projects chconf.h
- */
-MEMORY
-{
- flash0 : org = 0x08002000, len = 128k - 0x2000
- flash1 : org = 0x00000000, len = 0
- flash2 : org = 0x00000000, len = 0
- flash3 : org = 0x00000000, len = 0
- flash4 : org = 0x00000000, len = 0
- flash5 : org = 0x00000000, len = 0
- flash6 : org = 0x00000000, len = 0
- flash7 : org = 0x00000000, len = 0
- ram0 : org = 0x20000000, len = 20k
- ram1 : org = 0x00000000, len = 0
- ram2 : org = 0x00000000, len = 0
- ram3 : org = 0x00000000, len = 0
- ram4 : org = 0x00000000, len = 0
- ram5 : org = 0x00000000, len = 0
- ram6 : org = 0x00000000, len = 0
- ram7 : org = 0x00000000, len = 0
-}
-
-/* For each data/text section two region are defined, a virtual region
- and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash0);
-REGION_ALIAS("XTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash0);
-REGION_ALIAS("TEXT_FLASH_LMA", flash0);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash0);
-REGION_ALIAS("RODATA_FLASH_LMA", flash0);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash0);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
- of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
- the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash0);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld
+/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * ST32F103xB memory setup for use with the maplemini bootloader. + * You will have to + * #define CORTEX_VTOR_INIT 0x5000 + * in your projects chconf.h + */ +MEMORY +{ + flash0 : org = 0x08002000, len = 128k - 0x2000 + flash1 : org = 0x00000000, len = 0 + flash2 : org = 0x00000000, len = 0 + flash3 : org = 0x00000000, len = 0 + flash4 : org = 0x00000000, len = 0 + flash5 : org = 0x00000000, len = 0 + flash6 : org = 0x00000000, len = 0 + flash7 : org = 0x00000000, len = 0 + ram0 : org = 0x20000000, len = 20k + ram1 : org = 0x00000000, len = 0 + ram2 : org = 0x00000000, len = 0 + ram3 : org = 0x00000000, len = 0 + ram4 : org = 0x00000000, len = 0 + ram5 : org = 0x00000000, len = 0 + ram6 : org = 0x00000000, len = 0 + ram7 : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/keyboards/chibios_test/rules.mk b/keyboards/chibios_test/rules.mk new file mode 100644 index 0000000000..4b5a845356 --- /dev/null +++ b/keyboards/chibios_test/rules.mk @@ -0,0 +1,8 @@ +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover +CUSTOM_MATRIX ?= yes # Custom matrix file
\ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f072_onekey/Makefile b/keyboards/chibios_test/stm32_f072_onekey/Makefile index eae38c4b2b..191c6bb664 100644 --- a/keyboards/chibios_test/stm32_f072_onekey/Makefile +++ b/keyboards/chibios_test/stm32_f072_onekey/Makefile @@ -1,41 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Build Options -# comment out to disable the options. -# -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h index 3d877aaa2b..faca3defdf 100644 --- a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h +++ b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h @@ -1,171 +1,171 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-/*
- * STM32F0xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F0xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_HSI_ENABLED TRUE
-#define STM32_HSI14_ENABLED TRUE
-#define STM32_HSI48_ENABLED FALSE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED FALSE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
-#define STM32_PREDIV_VALUE 1
-#define STM32_PLLMUL_VALUE 12
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE STM32_PPRE_DIV1
-#define STM32_ADCSW STM32_ADCSW_HSI14
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_ADCSW STM32_ADCSW_HSI14
-#define STM32_USBSW STM32_USBSW_HSI48
-#define STM32_CECSW STM32_CECSW_HSI
-#define STM32_I2C1SW STM32_I2C1SW_HSI
-#define STM32_USART1SW STM32_USART1SW_PCLK
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_IRQ_PRIORITY 2
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM14 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 2
-#define STM32_GPT_TIM2_IRQ_PRIORITY 2
-#define STM32_GPT_TIM3_IRQ_PRIORITY 2
-#define STM32_GPT_TIM14_IRQ_PRIORITY 2
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 3
-#define STM32_I2C_I2C2_IRQ_PRIORITY 3
-#define STM32_I2C_USE_DMA TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY 1
-#define STM32_I2C_I2C2_DMA_PRIORITY 1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 3
-#define STM32_ICU_TIM2_IRQ_PRIORITY 3
-#define STM32_ICU_TIM3_IRQ_PRIORITY 3
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 3
-#define STM32_PWM_TIM2_IRQ_PRIORITY 3
-#define STM32_PWM_TIM3_IRQ_PRIORITY 3
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 3
-#define STM32_SERIAL_USART2_PRIORITY 3
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 2
-#define STM32_SPI_SPI2_IRQ_PRIORITY 2
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 2
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 3
-#define STM32_UART_USART2_IRQ_PRIORITY 3
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1 TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
-
-#endif /* _MCUCONF_H_ */
+/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_HSI48_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/chibios_test/stm32_f072_onekey/rules.mk b/keyboards/chibios_test/stm32_f072_onekey/rules.mk new file mode 100644 index 0000000000..eae38c4b2b --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/rules.mk @@ -0,0 +1,41 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F0xx +# linker script to use +# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +MCU_LDSCRIPT = STM32F072xB +# startup code to use +# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f0xx +# it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +BOARD = ST_STM32F072B_DISCOVERY +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m0 +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 6 +# If you want to be able to jump to bootloader from firmware on STM32 MCUs, +# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in +# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have +# a custom board definition that you plan to reuse). +# If you're not setting it here, leave it commented out. +# It is chip dependent, the correct number can be looked up here (page 175): +# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf +# This also requires a patch to chibios: +# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch +#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 + +# Build Options +# comment out to disable the options. +# +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/chibios_test/stm32_f103_onekey/Makefile b/keyboards/chibios_test/stm32_f103_onekey/Makefile index 307ca5b198..191c6bb664 100644 --- a/keyboards/chibios_test/stm32_f103_onekey/Makefile +++ b/keyboards/chibios_test/stm32_f103_onekey/Makefile @@ -1,52 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -# GENERIC STM32F103C8T6 board - stm32duino bootloader -OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = GENERIC_STM32_F103 - -# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -# MAPLE MINI -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000 -# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader -# BOARD = MAPLEMINI_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h index 626332a6aa..276829216e 100644 --- a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h +++ b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h @@ -1,209 +1,209 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define STM32F103_MCUCONF
-
-/*
- * STM32F103 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED FALSE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
-#define STM32_PLLMUL_VALUE 9
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV2
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_USB_CLOCK_REQUIRED TRUE
-#define STM32_USBPRE STM32_USBPRE_DIV1P5
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC1_IRQ_PRIORITY 6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM5 FALSE
-#define STM32_GPT_USE_TIM8 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM5_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 5
-#define STM32_I2C_I2C2_IRQ_PRIORITY 5
-#define STM32_I2C_I2C1_DMA_PRIORITY 3
-#define STM32_I2C_I2C2_DMA_PRIORITY 3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM5 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM5_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_USE_TIM4 FALSE
-#define STM32_PWM_USE_TIM5 FALSE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM5_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-
-/*
- * RTC driver system settings.
- */
-#define STM32_RTC_IRQ_PRIORITY 15
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1 TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
-
-#endif /* _MCUCONF_H_ */
+/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/rules.mk b/keyboards/chibios_test/stm32_f103_onekey/rules.mk new file mode 100644 index 0000000000..307ca5b198 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/rules.mk @@ -0,0 +1,52 @@ +# project specific files +SRC = matrix.c \ + led.c + +# GENERIC STM32F103C8T6 board - stm32duino bootloader +OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 +MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader +BOARD = GENERIC_STM32_F103 + +# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) +# OPT_DEFS = +# MCU_LDSCRIPT = STM32F103x8 +# BOARD = GENERIC_STM32_F103 + +# MAPLE MINI +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000 +# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader +# BOARD = MAPLEMINI_STM32_F103 + +## chip/board settings +# the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F1xx +# linker script to use +# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +# startup code to use +# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f1xx +# it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m3 +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 +# If you want to be able to jump to bootloader from firmware on STM32 MCUs, +# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in +# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have +# a custom board definition that you plan to reuse). +# If you're not setting it here, leave it commented out. +# It is chip dependent, the correct number can be looked up here (page 175): +# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf +# This also requires a patch to chibios: +# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch +#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 + + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile b/keyboards/chibios_test/teensy_lc_onekey/Makefile index 43ea9d82d9..191c6bb664 100644 --- a/keyboards/chibios_test/teensy_lc_onekey/Makefile +++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile @@ -1,49 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -MCU_FAMILY = KINETIS -MCU_SERIES = KL2x - -# Linker script to use -# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -MCU_LDSCRIPT = MKL26Z64 - -# Startup code to use -# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = kl2x - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -BOARD = PJRC_TEENSY_LC - -# Cortex version -# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 -MCU = cortex-m0plus - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif
\ No newline at end of file diff --git a/keyboards/chibios_test/teensy_lc_onekey/chconf.h b/keyboards/chibios_test/teensy_lc_onekey/chconf.h index cb36996c33..3294ac7eee 100644 --- a/keyboards/chibios_test/teensy_lc_onekey/chconf.h +++ b/keyboards/chibios_test/teensy_lc_onekey/chconf.h @@ -1,524 +1,524 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 32
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY 1000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM 20
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_TM FALSE
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY TRUE
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT TRUE
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES TRUE
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS TRUE
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES TRUE
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS TRUE
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK TRUE
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS TRUE
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS TRUE
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS TRUE
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/* Use __WFI in the idle thread for waiting. Does lower the power + * consumption. */ +#define CORTEX_ENABLE_WFI_IDLE TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/halconf.h b/keyboards/chibios_test/teensy_lc_onekey/halconf.h index b1d2cd5502..0436408b09 100644 --- a/keyboards/chibios_test/teensy_lc_onekey/halconf.h +++ b/keyboards/chibios_test/teensy_lc_onekey/halconf.h @@ -1,187 +1,187 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB TRUE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h index c636590197..2764e88989 100644 --- a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h +++ b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h @@ -1,55 +1,55 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define KL2x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#if 1
-/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
-#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
-#define KINETIS_PLLCLK_FREQUENCY 96000000UL
-#define KINETIS_SYSCLK_FREQUENCY 48000000UL
-#endif
-
-#if 0
-/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
-#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
-#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
-#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
-#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
-#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */
-#endif
-
-/*
- * SERIAL driver system settings.
- */
-#define KINETIS_SERIAL_USE_UART0 TRUE
-
-/*
- * USB driver settings
- */
-#define KINETIS_USB_USE_USB0 TRUE
-/* Need to redefine this, since the default is for K20x */
-/* This is for Teensy LC; you should comment it out (or change to 5)
- * for Teensy 3.x */
-#define KINETIS_USB_USB0_IRQ_PRIORITY 2
-
-#endif /* _MCUCONF_H_ */
+/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 1 +/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 0 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* Need to redefine this, since the default is for K20x */ +/* This is for Teensy LC; you should comment it out (or change to 5) + * for Teensy 3.x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/rules.mk b/keyboards/chibios_test/teensy_lc_onekey/rules.mk new file mode 100644 index 0000000000..43ea9d82d9 --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/rules.mk @@ -0,0 +1,49 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +MCU_FAMILY = KINETIS +MCU_SERIES = KL2x + +# Linker script to use +# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +MCU_LDSCRIPT = MKL26Z64 + +# Startup code to use +# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = kl2x + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +BOARD = PJRC_TEENSY_LC + +# Cortex version +# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 +MCU = cortex-m0plus + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/clueboard/Makefile b/keyboards/clueboard/Makefile index ccc01ea9a7..b9bada8f8d 100644 --- a/keyboards/clueboard/Makefile +++ b/keyboards/clueboard/Makefile @@ -1,109 +1,5 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - SUBPROJECT_DEFAULT = rev2 -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -AUDIO_ENABLE ?= no -RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/clueboard/config.h b/keyboards/clueboard/config.h index ceac80795b..ad68323856 100644 --- a/keyboards/clueboard/config.h +++ b/keyboards/clueboard/config.h @@ -29,9 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - /* Set 0 if debouncing isn't needed */ #define DEBOUNCING_DELAY 5 diff --git a/keyboards/clueboard/keymaps/default/keymap.c b/keyboards/clueboard/keymaps/default/keymap.c index 896bc7ebcc..01f158bf0f 100644 --- a/keyboards/clueboard/keymaps/default/keymap.c +++ b/keyboards/clueboard/keymaps/default/keymap.c @@ -66,19 +66,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `----------------------------------------------------------------------------------' */ [_RS] = KEYMAP( - #ifdef RGBLIGHT_ENABLE KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), - #else - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_TRNS, KC_TRNS, KC_TRNS), - #endif }; enum function_id { diff --git a/keyboards/clueboard/keymaps/skully/readme.md b/keyboards/clueboard/keymaps/skully/readme.md new file mode 100644 index 0000000000..c1182123d9 --- /dev/null +++ b/keyboards/clueboard/keymaps/skully/readme.md @@ -0,0 +1,5 @@ +# skullY's Clueboard Layout + +This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing. + +The most notable change from the default layout is putting Ctrl on the Capslock key. I also swap Alt and Cmd because I mostly use a Mac day to day. diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md index aa301f020c..4a76e2908c 100644 --- a/keyboards/clueboard/readme.md +++ b/keyboards/clueboard/readme.md @@ -1,4 +1,97 @@ Clueboard keyboard firmware ====================== -TODO: to be updated. +DIY/Assembled compact 66% keyboard by [Clueboard](http://clueboard.co). + +For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). + +## First Time Setup + +Download or clone the whole firmware and navigate to the keyboards/clueboard directory. Once your dev env is setup, you'll be able to generate the default .hex: + +``` +$ make +``` + +You will see a lot of output and if everything worked correctly you will see something similar to this: + +``` +Size after: + text data bss dec hex filename + 0 19992 0 19992 4e18 clueboard_rev2_default.hex +``` + +At this point you can press RESET on your Clueboard and flash your keyboard with this command: + +``` +$ make dfu +``` + +If you would like to use one of the alternative keymaps, or create your own, see below. + +## Clueboard 1.0 + +If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `rev1` to your make command, like this: + +``` +$ make rev1 +``` + +And when flashing your keyboard: + +``` +$ make rev1-dfu +``` + +If you are flashing an alternative layout to your rev1, include both `rev1` and `<keymap>` in your command, for example when flashing max: + +``` +$ make rev1-max-dfu +``` + +## Alternate Keymaps + +There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `<keymap>` to your command: + +``` +$ make skully +``` + +And when flashing your keyboard, put `<keymap>` between "make" and "dfu": + +``` +$ make skully-dfu +``` + +### Notable Layouts + +These layouts are notable for one reason or another. If you are looking for ideas or inspiration you should look at these first: + +* [keymaps/default](keymaps/default) - The default Clueboard layout +* [keymaps/max](keymaps/max) - A maximised layout that makes use of every key and feature of the Clueboard 2.0 PCB. +* [keymaps/skully](keymaps/skully) - The layout that @skullydazed uses on his own Clueboards. + +## Create Your Own Keymap + +There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. As a way to get started, here is the procedure I recommend: + +* Copy `[keymaps/default](keymaps/default/)` to `keymaps/<your_layout>`. +* Compile the firmware (`$ make <your_layout>`) +* Flash the firmware (`$ make <your_layout>-dfu`) +* Make sure everything works like the default keyboard +* Modify `keymaps/<your_layout>/readme.md` to tell others about your layout. +* Modify `keymaps/<your_layout>/keymap.c` to reflect your desired layout. +* Compile your new custom firmware (`$ make <your_layout>`) +** If you have warnings you may flash without fixing them, but something may not work right. +** If you have any errors you must fix them before continuing. +* Flash the firmware (`$ make <your_layout>-dfu`) + +## Share Your Keymap + +Got your layout dialed in? Please share it with the world so we can benefit from your work! Simply submit a pull request with your layout and we'll include it in the official repository. Please use the following guidelines when putting together your pull request: + +* Include a readme.md that states what your primary keyboard use is, how your layout differs from the default, and highlights anything you think makes your layout particularly great. +* If your layout requires certain features (EG, RGB underlight or backlighting) ensure you have a Makefile and config.h that reflects that +* If your layout requires special hardware to be added, please describe that in the readme.md + +TODO: Write up or link quick how-to on creating and submitting a PR. (Pull requests accepted. :) diff --git a/keyboards/clueboard/rev1/Makefile b/keyboards/clueboard/rev1/Makefile index 80a942d06f..191c6bb664 100644 --- a/keyboards/clueboard/rev1/Makefile +++ b/keyboards/clueboard/rev1/Makefile @@ -1,5 +1,3 @@ -BACKLIGHT_ENABLE = no - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/clueboard/rev1/rules.mk b/keyboards/clueboard/rev1/rules.mk new file mode 100644 index 0000000000..80a942d06f --- /dev/null +++ b/keyboards/clueboard/rev1/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/clueboard/rev2/Makefile b/keyboards/clueboard/rev2/Makefile index cea967b795..191c6bb664 100644 --- a/keyboards/clueboard/rev2/Makefile +++ b/keyboards/clueboard/rev2/Makefile @@ -1,5 +1,3 @@ -BACKLIGHT_ENABLE = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard/rev2/config.h index 02982ff299..15ca4ece86 100644 --- a/keyboards/clueboard/rev2/config.h +++ b/keyboards/clueboard/rev2/config.h @@ -36,4 +36,4 @@ #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 -#endif
\ No newline at end of file +#endif diff --git a/keyboards/clueboard/rev2/rules.mk b/keyboards/clueboard/rev2/rules.mk new file mode 100644 index 0000000000..cea967b795 --- /dev/null +++ b/keyboards/clueboard/rev2/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/clueboard/rules.mk b/keyboards/clueboard/rules.mk new file mode 100644 index 0000000000..3909fbd5cb --- /dev/null +++ b/keyboards/clueboard/rules.mk @@ -0,0 +1,103 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +AUDIO_ENABLE ?= no +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file diff --git a/keyboards/clueboard2/clueboard2.c b/keyboards/clueboard2/clueboard2.c deleted file mode 100644 index d78ffed9ba..0000000000 --- a/keyboards/clueboard2/clueboard2.c +++ /dev/null @@ -1,63 +0,0 @@ -#include "clueboard2.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); - - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1<<JTD); - MCUCR |= (1<<JTD); -}; - -void led_init_ports() { - // * Set our LED pins as output - DDRB |= (1<<4); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // Turn capslock on - PORTB |= (1<<4); - } else { - // Turn capslock off - PORTB &= ~(1<<4); - } -} - -/* Clueboard 2.0 LED locations: - * - * Capslock: B4, pull high to turn on - * LCtrl: Shared with Capslock, DO NOT INSTALL LED'S IN BOTH - * Page Up: B7, pull high to turn on - * Escape: D6, pull high to turn on - * Arrows: D4, pull high to turn on - */ - -void backlight_init_ports(void) { - print("init_backlight_pin()\n"); - // Set our LED pins as output - DDRD |= (1<<6); // Esc - DDRB |= (1<<7); // Page Up - DDRD |= (1<<4); // Arrows - - // Set our LED pins low - PORTD &= ~(1<<6); // Esc - PORTB &= ~(1<<7); // Page Up - PORTD &= ~(1<<4); // Arrows -} - -void backlight_set(uint8_t level) { - if ( level == 0 ) { - // Turn off light - PORTD |= (1<<6); // Esc - PORTB |= (1<<7); // Page Up - PORTD |= (1<<4); // Arrows - } else { - // Turn on light - PORTD &= ~(1<<6); // Esc - PORTB &= ~(1<<7); // Page Up - PORTD &= ~(1<<4); // Arrows - } -} diff --git a/keyboards/cluecard/Makefile b/keyboards/cluecard/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/cluecard/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/cluecard/cluecard.c b/keyboards/cluecard/cluecard.c new file mode 100644 index 0000000000..81db252d28 --- /dev/null +++ b/keyboards/cluecard/cluecard.c @@ -0,0 +1,98 @@ +#include "cluecard.h" +#define BL_RED OCR1B +#define BL_GREEN OCR1A +#define BL_BLUE OCR1C + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +void backlight_init_ports(void) +{ + // Set B5, B6, and B7 as output + DDRB |= (1<<7)|(1<<6)|(1<<5); + + // Setup PWM + ICR1 = 0xFFFF; + TCCR1A = 0b10101010; + TCCR1B = 0b00011001; + + BL_RED = 0xFFFF; + BL_GREEN = 0xFFFF; + BL_BLUE = 0xFFFF; +} + +void backlight_set(uint8_t level) +{ + // Set the RGB color + switch (level) + { + case 0: + // Off + BL_RED = 0xFFFF; + BL_GREEN = 0xFFFF; + BL_BLUE = 0xFFFF; + break; + case 1: + // Red + BL_RED = 0x0000; + BL_GREEN = 0xFFFF; + BL_BLUE = 0xFFFF; + break; + case 2: + // Green + BL_RED = 0xFFFF; + BL_GREEN = 0x0000; + BL_BLUE = 0xFFFF; + break; + case 3: + // Blue + BL_RED = 0xFFFF; + BL_GREEN = 0xFFFF; + BL_BLUE = 0x0000; + break; + case 4: + // Magenta + BL_RED = 0x4000; + BL_GREEN = 0x4000; + BL_BLUE = 0x4000; + break; + case 5: + // Purple + BL_RED = 0x0000; + BL_GREEN = 0xFFFF; + BL_BLUE = 0x0000; + break; + case 6: + // Yellow + BL_RED = 0x0000; + BL_GREEN = 0x0000; + BL_BLUE = 0xFFFF; + break; + default: + xprintf("Unknown level: %d\n", level); + } +} diff --git a/keyboards/cluecard/cluecard.h b/keyboards/cluecard/cluecard.h new file mode 100644 index 0000000000..3342a08233 --- /dev/null +++ b/keyboards/cluecard/cluecard.h @@ -0,0 +1,22 @@ +#ifndef CLUECARD_H +#define CLUECARD_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, \ + k10, k12, \ + k20, k21, k22, \ + k11, \ + k30, k31, k32 \ +) { \ + { k00, k01, k02, }, \ + { k10, k11, k12, }, \ + { k20, k21, k22, }, \ + { k30, k31, k32, } \ +} + +#endif diff --git a/keyboards/cluecard/config.h b/keyboards/cluecard/config.h new file mode 100644 index 0000000000..765347b131 --- /dev/null +++ b/keyboards/cluecard/config.h @@ -0,0 +1,167 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC1ED +#define PRODUCT_ID 0x2330 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Clueboard +#define PRODUCT ATMEGA32U4 Firmware Dev Kit +#define DESCRIPTION A small board to help you hack on QMK. + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 3 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F5, F4, B4 } +#define MATRIX_COL_PINS { F1, F7, F6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 20 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 6 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* Underlight configuration + */ +#define RGB_DI_PIN E6 +//#define RGBLIGHT_TIMER +#define RGBLED_NUM 4 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/cluecard/keymaps/default/Makefile b/keyboards/cluecard/keymaps/default/Makefile new file mode 100644 index 0000000000..8ee841da02 --- /dev/null +++ b/keyboards/cluecard/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/cluecard/keymaps/default/config.h b/keyboards/cluecard/keymaps/default/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/cluecard/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/cluecard/keymaps/default/keymap.c b/keyboards/cluecard/keymaps/default/keymap.c new file mode 100644 index 0000000000..517afe867b --- /dev/null +++ b/keyboards/cluecard/keymaps/default/keymap.c @@ -0,0 +1,63 @@ +#include "cluecard.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( + RGB_TOG, RGB_SAI, RGB_VAI, \ + RGB_HUD, RGB_HUI, \ + RGB_MOD, RGB_SAD, RGB_VAD, \ + BL_STEP, \ + F(0), F(1), F(2) \ + ) +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), + [1] = ACTION_FUNCTION(1), + [2] = ACTION_FUNCTION(2) +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + if (record->event.pressed) { + switch (id) { + case 0: + PLAY_NOTE_ARRAY(tone_startup, false, 0); + break; + case 1: + PLAY_NOTE_ARRAY(music_scale, false, 0); + break; + case 2: + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + break; + } + } +}; + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { +} diff --git a/keyboards/cluecard/keymaps/default/readme.md b/keyboards/cluecard/keymaps/default/readme.md new file mode 100644 index 0000000000..9e3b97beac --- /dev/null +++ b/keyboards/cluecard/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for cluecard diff --git a/keyboards/cluecard/readme.md b/keyboards/cluecard/readme.md new file mode 100644 index 0000000000..be13fc0171 --- /dev/null +++ b/keyboards/cluecard/readme.md @@ -0,0 +1,28 @@ +cluecard keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/cluecard folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/cluecard/rules.mk b/keyboards/cluecard/rules.mk new file mode 100644 index 0000000000..454235877d --- /dev/null +++ b/keyboards/cluecard/rules.mk @@ -0,0 +1,70 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= yes # Audio output on port C6 diff --git a/keyboards/cluepad/Makefile b/keyboards/cluepad/Makefile index a331ff4dcd..4e2a6f00fd 100644 --- a/keyboards/cluepad/Makefile +++ b/keyboards/cluepad/Makefile @@ -1,70 +1,3 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -# CONSOLE_ENABLE ?= yes # Console for debug(+400) -# COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality -RGBLIGHT_ENABLE ?= yes -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/cluepad/rules.mk b/keyboards/cluepad/rules.mk new file mode 100644 index 0000000000..19b16b95a9 --- /dev/null +++ b/keyboards/cluepad/rules.mk @@ -0,0 +1,65 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality +RGBLIGHT_ENABLE ?= yes +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file diff --git a/keyboards/ergodox/Makefile b/keyboards/ergodox/Makefile index 05fb588d11..7165350050 100644 --- a/keyboards/ergodox/Makefile +++ b/keyboards/ergodox/Makefile @@ -1,34 +1,5 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- SUBPROJECT_DEFAULT = ez -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= yes # Unicode - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile index 37e554b304..191c6bb664 100644 --- a/keyboards/ergodox/ez/Makefile +++ b/keyboards/ergodox/ez/Makefile @@ -1,76 +1,3 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- - -# # project specific files -SRC = twimaster.c \ - matrix.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/ergodox/ez/ez.h b/keyboards/ergodox/ez/ez.h index db4ec867bc..124bf850e7 100644 --- a/keyboards/ergodox/ez/ez.h +++ b/keyboards/ergodox/ez/ez.h @@ -119,4 +119,45 @@ inline void ergodox_led_all_set(uint8_t n) { k0D, k1D, k2D, k3D, k4D, KC_NO } \ } +#define KEYMAP_80( \ + \ + /* left hand, spatial positions */ \ + k00,k01,k02,k03,k04,k05,k06, \ + k10,k11,k12,k13,k14,k15,k16, \ + k20,k21,k22,k23,k24,k25, \ + k30,k31,k32,k33,k34,k35,k36, \ + k40,k41,k42,k43,k44, \ + k55,k56, \ + k45,k46,k54, \ + k53,k52,k51, \ + \ + /* right hand, spatial positions */ \ + k07,k08,k09,k0A,k0B,k0C,k0D, \ + k17,k18,k19,k1A,k1B,k1C,k1D, \ + k28,k29,k2A,k2B,k2C,k2D, \ + k37,k38,k39,k3A,k3B,k3C,k3D, \ + k49,k4A,k4B,k4C,k4D, \ + k57,k58, \ + k59,k47,k48, \ + k5C,k5B,k5A ) \ + \ + /* matrix positions */ \ + { \ + { k00, k10, k20, k30, k40, KC_NO }, \ + { k01, k11, k21, k31, k41, k51 }, \ + { k02, k12, k22, k32, k42, k52 }, \ + { k03, k13, k23, k33, k43, k53 }, \ + { k04, k14, k24, k34, k44, k54 }, \ + { k05, k15, k25, k35, k45, k55 }, \ + { k06, k16, KC_NO, k36, k46, k56 }, \ + \ + { k07, k17, KC_NO, k37, k47, k57 }, \ + { k08, k18, k28, k38, k48, k58 }, \ + { k09, k19, k29, k39, k49, k59 }, \ + { k0A, k1A, k2A, k3A, k4A, k5A }, \ + { k0B, k1B, k2B, k3B, k4B, k5B }, \ + { k0C, k1C, k2C, k3C, k4C, k5C }, \ + { k0D, k1D, k2D, k3D, k4D, KC_NO } \ + } + #endif diff --git a/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png b/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png Binary files differnew file mode 100644 index 0000000000..66b9752ebc --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png diff --git a/keyboards/ergodox/ez/keymaps/profet_80/keymap.c b/keyboards/ergodox/ez/keymaps/profet_80/keymap.c new file mode 100644 index 0000000000..505ff29722 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/profet_80/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | 1 | 2 | Home | | PgUp | 3 | 4 | + * |------|------|------| |------|--------|------| + * | Space| BkSp | End | | PgDn | Tab |Enter | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP_80( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_1, KC_2, KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP,KC_3, KC_4, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * |------|------|------| |------|------|------| + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP_80( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+----------. + * | | | | | | | | + * |------|------|------| |------|------|----------| + * | | | | | | |BrwserBack| + * `--------------------' `------------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP_80( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/ez/keymaps/profet_80/readme.md b/keyboards/ergodox/ez/keymaps/profet_80/readme.md new file mode 100644 index 0000000000..b6bbb86d2c --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/profet_80/readme.md @@ -0,0 +1,10 @@ +# ErgoDox 80 Default Configuration + +This is based on the default Ergodox EZ keymap. +The difference is that this keymap supports 80 key layouts. +If you own an 80 key Ergodox, use this as an example to get your desired keymap. + +**NOTE:** This layout is not physically supported by the Ergodox EZ. + + + diff --git a/keyboards/ergodox/ez/keymaps/steno/Makefile b/keyboards/ergodox/ez/keymaps/steno/Makefile new file mode 100644 index 0000000000..b6fb9b1a80 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/steno/Makefile @@ -0,0 +1,3 @@ +VIRTSER_ENABLE = yes +# Not enough interupts, so something has to go +MOUSEKEY_ENABLE = no diff --git a/keyboards/ergodox/ez/keymaps/steno/keymap.c b/keyboards/ergodox/ez/keymaps/steno/keymap.c new file mode 100644 index 0000000000..3e9830905c --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/steno/keymap.c @@ -0,0 +1,324 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "sendchar.h" +#include "virtser.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys +#define TXBOLT 3 // TxBolt Steno Virtual Serial +#define TXBOLT2 4 // TxBolt Steno Virtual Serial Alternative Layout + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | TX | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | BOLT |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(TXBOLT), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | RESET | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +// TxBolt Codes +#define Sl 0b00000001 +#define Tl 0b00000010 +#define Kl 0b00000100 +#define Pl 0b00001000 +#define Wl 0b00010000 +#define Hl 0b00100000 +#define Rl 0b01000001 +#define Al 0b01000010 +#define Ol 0b01000100 +#define X 0b01001000 +#define Er 0b01010000 +#define Ur 0b01100000 +#define Fr 0b10000001 +#define Rr 0b10000010 +#define Pr 0b10000100 +#define Br 0b10001000 +#define Lr 0b10010000 +#define Gr 0b10100000 +#define Tr 0b11000001 +#define Sr 0b11000010 +#define Dr 0b11000100 +#define Zr 0b11001000 +#define NM 0b11010000 +#define GRPMASK 0b11000000 +#define GRP0 0b00000000 +#define GRP1 0b01000000 +#define GRP2 0b10000000 +#define GRP3 0b11000000 +/* Keymap 3: TxBolt (Serial) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | BKSPC | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | # | # | # | # | # | | | | # | # | # | # | # | # | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | T | P | H | * |------| |------| * | F | P | L | T | D | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | K | W | R | * | | | | * | R | B | G | S | Z | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | A | O |------| |------| E | U | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// TxBolt over Serial +[TXBOLT] = KEYMAP( + KC_BSPC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), KC_NO, + KC_NO, M(Sl), M(Tl), M(Pl), M(Hl), M(X), + KC_NO, M(Sl), M(Kl), M(Wl), M(Rl), M(X), KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + M(Al), M(Ol), KC_NO, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, M(NM), M(NM), M(NM), M(NM), M(NM), M(NM), + M(X), M(Fr), M(Pr), M(Lr), M(Tr), M(Dr), + KC_NO, M(X), M(Rr), M(Br), M(Gr), M(Sr), M(Zr), + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, M(Er), M(Ur) +), +/* Keymap 4: TxBolt (Serial) Alternative + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | # | # | # | # | # | | | | # | # | # | # | # | # | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | S | T | P | H | * | | | | * | F | P | L | T | D | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | K | W | R | * |------| |------| * | R | B | G | S | Z | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | A | O | | E | U | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// TxBolt over Serial +[TXBOLT2] = KEYMAP( + KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), KC_NO, + KC_NO, M(Sl), M(Tl), M(Pl), M(Hl), M(X), KC_NO, + KC_NO, M(Sl), M(Kl), M(Wl), M(Rl), M(X), + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, M(Al), M(Ol), + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO, + // right hand + KC_NO, M(NM), M(NM), M(NM), M(NM), M(NM), M(NM), + KC_TRNS, M(X), M(Fr), M(Pr), M(Lr), M(Tr), M(Dr), + M(X), M(Rr), M(Br), M(Gr), M(Sr), M(Zr), + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + M(Er), M(Ur), KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +uint8_t chord[4] = {0,0,0,0}; +uint8_t pressed_count = 0; + +void send_chord(void) +{ + for(uint8_t i = 0; i < 4; i++) + { + if(chord[i]) + virtser_send(chord[i]); + } + virtser_send(0); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) +{ + // We need to track keypresses in all modes, in case the user + // changes mode whilst pressing other keys. + if (record->event.pressed) + pressed_count++; + else + pressed_count--; + return true; +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + + if (record->event.pressed) { + uint8_t grp = (id & GRPMASK) >> 6; + chord[grp] |= id; + } + else { + if (pressed_count == 0) { + send_chord(); + chord[0] = chord[1] = chord[2] = chord[3] = 0; + } + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/ez/keymaps/steno/readme.md b/keyboards/ergodox/ez/keymaps/steno/readme.md new file mode 100644 index 0000000000..d67cde2a3c --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/steno/readme.md @@ -0,0 +1,92 @@ +# ErgoDox EZ Steno Configuration + +This layout has a layer that uses the TxBolt Stenograph protocol over a Virtual Serial port. It requires something like Plover in order to function. + +In Plover, you can select TX Bolt as the Stenotype Machine, and find the COM port that was assigned. In this way, your regular keyboard will still function normally, and you can switch back and forth between the Steno and Keyboard layers. + +<pre><code> +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | TX | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | BOLT |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +/* Keymap 2: Media keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | RESET | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +/* Keymap 3: TxBolt (Serial) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | BKSPC | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | # | # | # | # | # | | | | # | # | # | # | # | # | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | T | P | H | * |------| |------| * | F | P | L | T | D | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | S | K | W | R | * | | | | * | R | B | G | S | Z | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | A | O |------| |------| E | U | + * | | | | | | | | + * `--------------------' `--------------------' + */ +</code></pre> diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk new file mode 100644 index 0000000000..37e554b304 --- /dev/null +++ b/keyboards/ergodox/ez/rules.mk @@ -0,0 +1,76 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make = Make software. +# +# make clean = Clean out built project files. +# +# That's pretty much all you need. To compile, always go make clean, +# followed by make. +# +# For advanced users only: +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +#---------------------------------------------------------------------------- + +# # project specific files +SRC = twimaster.c \ + matrix.c + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/ergodox/infinity/Makefile b/keyboards/ergodox/infinity/Makefile index ccb735a485..191c6bb664 100644 --- a/keyboards/ergodox/infinity/Makefile +++ b/keyboards/ergodox/infinity/Makefile @@ -1,77 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x - -# Linker script to use -# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader -# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader -MCU_LDSCRIPT = MK20DX256BLDR8 - -# Startup code to use -# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity 60% -# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox -MCU_STARTUP = k20x7 - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -# - MCHCK_K20 for Infinity KB -#BOARD = MCHCK_K20 -BOARD = PJRC_TEENSY_3_1 - -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000 - -# Build Options -# comment out to disable the options. -# -CUSTOM_MATRIX ?= yes # Custom matrix file -SERIAL_LINK_ENABLE = yes -VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile -LCD_ENABLE ?= yes -LED_ENABLE ?= yes -LCD_BACKLIGHT_ENABLE ?= yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - -ifdef LCD_ENABLE -include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk -endif - -ifdef LED_ENABLE -include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk -endif +endif
\ No newline at end of file diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c index f89e046d0d..c5793385fe 100644 --- a/keyboards/ergodox/infinity/infinity.c +++ b/keyboards/ergodox/infinity/infinity.c @@ -130,3 +130,27 @@ void ergodox_right_led_3_off(void){ void ergodox_right_led_off(uint8_t led){ } + +#ifdef ONEHAND_ENABLE +__attribute__ ((weak)) +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + {{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}}, + {{0, 10}, {1, 10}, {2, 10}, {3, 10}, {4, 10}}, + {{0, 11}, {1, 11}, {2, 11}, {3, 11}, {4, 11}}, + {{0, 12}, {1, 12}, {2, 12}, {3, 12}, {4, 12}}, + {{0, 13}, {1, 13}, {2, 13}, {3, 13}, {4, 13}}, + {{0, 14}, {1, 14}, {2, 14}, {3, 14}, {4, 14}}, + {{0, 15}, {1, 15}, {2, 15}, {3, 15}, {4, 15}}, + {{0, 16}, {1, 16}, {2, 16}, {3, 16}, {4, 16}}, + {{0, 17}, {1, 17}, {2, 17}, {3, 17}, {4, 17}}, + {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}}, + {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}}, + {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}}, + {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}}, + {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}}, + {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}}, + {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}}, + {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}}, + {{0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}}, +}; +#endif diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk new file mode 100644 index 0000000000..ccb735a485 --- /dev/null +++ b/keyboards/ergodox/infinity/rules.mk @@ -0,0 +1,77 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +# - For Infinity KB, SERIES = K20x +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader +# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader +MCU_LDSCRIPT = MK20DX256BLDR8 + +# Startup code to use +# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 and Infinity 60% +# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox +MCU_STARTUP = k20x7 + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +# - MCHCK_K20 for Infinity KB +#BOARD = MCHCK_K20 +BOARD = PJRC_TEENSY_3_1 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000 + +# Build Options +# comment out to disable the options. +# +CUSTOM_MATRIX ?= yes # Custom matrix file +SERIAL_LINK_ENABLE = yes +VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile +LCD_ENABLE ?= yes +LED_ENABLE ?= yes +LCD_BACKLIGHT_ENABLE ?= yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +ifdef LCD_ENABLE +include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk +endif + +ifdef LED_ENABLE +include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk +endif diff --git a/keyboards/ergodox/keymaps/absenth/absenth_highres.png b/keyboards/ergodox/keymaps/absenth/absenth_highres.png Binary files differnew file mode 100644 index 0000000000..c07aa8803f --- /dev/null +++ b/keyboards/ergodox/keymaps/absenth/absenth_highres.png diff --git a/keyboards/ergodox/keymaps/absenth/keymap.c b/keyboards/ergodox/keymaps/absenth/keymap.c new file mode 100644 index 0000000000..ded668e13b --- /dev/null +++ b/keyboards/ergodox/keymaps/absenth/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A/L2 | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LS/PO |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RS/PC | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, LT(MDIA, KC_A), KC_S, KC_D, KC_F, KC_G, + KC_LSPO, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSPC, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| left | down | up | down | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | Lclk | Rclk |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/absenth/readme.md b/keyboards/ergodox/keymaps/absenth/readme.md new file mode 100644 index 0000000000..0c04bf4177 --- /dev/null +++ b/keyboards/ergodox/keymaps/absenth/readme.md @@ -0,0 +1,11 @@ +# ErgoDox EZ Absenth Configuration + +## Changelog + + +* Sept. 14, 2016 (V0.2): + * Added Space Cadet to Left and Right Shift. Pressing Left shift with no other key adds an "(" and pressing Right shift with no other key adds an ")" +* Sept. 8, 2016 (V0.1): + * Made A key double as MEDIA Layer change when you hold it. Added mouse buttons to the large thumb buttons on the left side on the Media Layer. Added vi/vim style arrow keys on HJKL on media layer. + + diff --git a/keyboards/ergodox/keymaps/algernon/Makefile b/keyboards/ergodox/keymaps/algernon/Makefile index 6bf3976b9d..7c2b3ad97c 100644 --- a/keyboards/ergodox/keymaps/algernon/Makefile +++ b/keyboards/ergodox/keymaps/algernon/Makefile @@ -1,17 +1,25 @@ BOOTMAGIC_ENABLE=no COMMAND_ENABLE=no SLEEP_LED_ENABLE=no -UNICODE_ENABLE=no FORCE_NKRO ?= yes DEBUG_ENABLE = no CONSOLE_ENABLE = no TAP_DANCE_ENABLE = yes KEYLOGGER_ENABLE ?= yes +UCIS_ENABLE = yes +MOUSEKEY_ENABLE ?= yes + +AUTOLOG_ENABLE ?= no ifeq (${FORCE_NKRO},yes) OPT_DEFS += -DFORCE_NKRO endif +ifeq (${AUTOLOG_ENABLE},yes) +KEYLOGGER_ENABLE = yes +OPT_DEFS += -DAUTOLOG_ENABLE +endif + ifeq (${KEYLOGGER_ENABLE},yes) OPT_DEFS += -DKEYLOGGER_ENABLE CONSOLE_ENABLE = yes diff --git a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png Binary files differindex 3df68ea53d..3d0a5fb20c 100644 --- a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png +++ b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png diff --git a/keyboards/ergodox/keymaps/algernon/images/base-layer.png b/keyboards/ergodox/keymaps/algernon/images/base-layer.png Binary files differindex 7b25a05b3a..7ea57aae38 100644 --- a/keyboards/ergodox/keymaps/algernon/images/base-layer.png +++ b/keyboards/ergodox/keymaps/algernon/images/base-layer.png diff --git a/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png b/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png Binary files differdeleted file mode 100644 index 698d11e5f2..0000000000 --- a/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png +++ /dev/null diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c index c4de53da27..9f476d8a6b 100644 --- a/keyboards/ergodox/keymaps/algernon/keymap.c +++ b/keyboards/ergodox/keymaps/algernon/keymap.c @@ -1,1218 +1,1058 @@ -/*
- * algernon's ErgoDox EZ layout, please see the readme.md file!
- */
-
-#include "ergodox.h"
-#include "led.h"
-#include "debug.h"
-#include "action_layer.h"
-#include "action_util.h"
-#include "mousekey.h"
-#include "timer.h"
-#include "keymap_plover.h"
-#include "eeconfig.h"
-#include "wait.h"
+/* + * algernon's ErgoDox EZ layout, please see the readme.md file! + */ + +#include <stdarg.h> +#include "ergodox.h" +#include "led.h" +#include "debug.h" +#include "action_layer.h" +#include "action_util.h" +#include "mousekey.h" +#include "timer.h" +#include "keymap_plover.h" +#include "eeconfig.h" +#include "wait.h" #include "version.h" -
-/* Layers */
-
-enum {
- BASE = 0,
- ADORE,
- ARRW,
- APPSEL,
- HUN,
- NMDIA,
- OHLFT,
- OHRGT,
- PLVR,
-};
-
-/* Macros */
-
-enum {
- NONE = 0,
- // Buttons that do extra stuff
- A_GUI,
- A_PLVR,
- A_ESC,
- A_MPN,
-
- // Function / number keys
- KF_1, // 1, F1
- KF_2, // 2, F2
- KF_3, // ...
- KF_4,
- KF_5,
- KF_6,
- KF_7,
- KF_8,
- KF_9,
- KF_10,
- KF_11, // =, F11
-
- // Application select keys
- APP_SLK, // Slack
- APP_EMCS, // Emacs
- APP_TERM, // Terminal
- APP_CHRM, // Chrome
- APP_MSIC, // Music
-
- // Diagonal mouse movement
- A_MUL,
- A_MUR,
- A_MDL,
- A_MDR,
-
- // Hungarian layer keys
- HU_AA, // Ã
- HU_OO, // Ó
- HU_EE, // É
- HU_UU, // Ú
- HU_II, // Ã
- HU_OE, // Ö
- HU_UE, // Ü
- HU_OEE, // Å
- HU_UEE, // Å°
-
- // One-handed layout specials
- OH_BSSPC,
- OH_ENTSFT,
- OH_BASE,
- OH_LEFT,
- OH_RIGHT,
-};
-
-/* Fn keys */
-
-enum {
- F_BSE = 0,
- F_HUN,
- F_GUI,
- F_SFT,
- F_ALT,
- F_CTRL
-};
-
-/* Custom keycodes */
-
-enum {
- CT_CLN = 0,
- CT_MNS,
- CT_TA,
-};
-
-/* States & timers */
-
-uint16_t gui_timer = 0;
-
-uint16_t kf_timers[12];
-
-uint16_t oh_base_timer = 0;
-uint16_t oh_bsspc_timer = 0;
-uint16_t oh_entsft_timer = 0;
-
-#define OH_BLINK_INTERVAL 500
-
-uint8_t oh_left_blink = 0;
-uint16_t oh_left_blink_timer = 0;
-uint8_t oh_right_blink = 0;
-uint16_t oh_right_blink_timer = 0;
-
-#if KEYLOGGER_ENABLE
-bool log_enable = false;
-#endif
-
-bool time_travel = false;
-
-/* The Keymap */
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Keymap 0: Base Layer
- *
- * ,-----------------------------------------------------. ,-----------------------------------------------------.
- * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 |
- * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
- * | Next/Prev | ' | , | . | P | Y | [ | | ] | F | G | C | R | L | \ |
- * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
- * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow |
- * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------|
- * | Play/Pause| / | Q | J | K | X | | | | B | M | W | V | Z | Stop |
- * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
- * | | | | | : | | - | | | | |
- * `-----------------------------------' `-----------------------------------'
- * ,-------------. ,-------------.
- * | LAlt | GUI | | MDIA | 1HND |
- * ,------|------|------| |------+------+------.
- * | | | Ctrl | | LEAD | | |
- * |Backsp|LShift|------| |------| Enter| Space|
- * | | | ESC | | HUN | | |
- * `--------------------' `--------------------'
- */
-[BASE] = KEYMAP(
-// left hand
- KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR)
-,M(A_MPN) ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC
-,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I
-,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN
-,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN)
-
- ,F(F_ALT),F(F_GUI)
- ,F(F_CTRL)
- ,KC_BSPC,F(F_SFT),M(A_ESC)
-
- // right hand
- ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11
- ,KC_RBRC ,KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS
- ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL
- ,KC_RPRN ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP
- ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO
-
- ,OSL(NMDIA),M(OH_LEFT)
- ,KC_LEAD
- ,F(F_HUN) ,KC_ENT ,KC_SPC
- ),
-
-/* Keymap 1: Adore layer
- *
- * ,-----------------------------------------------------. ,-----------------------------------------------------.
- * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 |
- * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
- * | Next/Prev | , | . | L | W | M | [ | | ] | F | H | C | P | Y | \ |
- * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
- * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = / Arrow |
- * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------|
- * | Play/Pause| / | Z | ' | K | X | | | | B | G | V | J | Q | Stop |
- * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
- * | | | | | : | | - | | | | |
- * `-----------------------------------' `-----------------------------------'
- * ,-------------. ,-------------.
- * | LAlt | GUI | | MDIA | 1HND |
- * ,------|------|------| |------+------+------.
- * | | | Ctrl | | LEAD | | |
- * |Backsp|LShift|------| |------| Enter| Space|
- * | | | ESC | | HUN | | |
- * `--------------------' `--------------------'
- */
-[ADORE] = KEYMAP(
-// left hand
- KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR)
-,M(A_MPN) ,KC_COMM ,KC_DOT ,KC_L ,KC_W ,KC_M ,KC_LBRC
-,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U
-,KC_MPLY ,KC_SLSH ,KC_Z ,KC_QUOT,KC_K ,KC_X ,KC_LPRN
-,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN)
-
- ,F(F_ALT),F(F_GUI)
- ,F(F_CTRL)
- ,KC_BSPC,F(F_SFT),M(A_ESC)
-
- // right hand
- ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11
- ,KC_RBRC ,KC_F ,KC_H ,KC_C ,KC_P ,KC_Y ,KC_BSLS
- ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL
- ,KC_RPRN ,KC_B ,KC_G ,KC_V ,KC_J ,KC_Q ,KC_MSTP
- ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO
-
- ,OSL(NMDIA),M(OH_LEFT)
- ,KC_LEAD
- ,F(F_HUN) ,KC_ENT ,KC_SPC
- ),
-
-/* Keymap 2: Arrow layer
- *
- * ,-----------------------------------------------------. ,-----------------------------------------------------.
- * | | | | | | | | | | | | | | | |
- * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
- * | | | | | | | | | | | Home | Up | End | | |
- * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
- * | | | | | | |------| |------| | Left | Down | Rght | | |
- * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
- * | | | | | | | | | | | | | | | |
- * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
- * | | | | | | | | | | | |
- * `----------------------------------' `----------------------------------'
- * ,-------------. ,-------------.
- * | | | | | |
- * ,------|------|------| |------+------+------.
- * | | | | | | | |
- * | | |------| |------| PgUp | PgDn |
- * | | | | | | | |
- * `--------------------' `--------------------'
- */
-
-[ARRW] = KEYMAP(
-// left hand
- KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
- ,KC_TRNS ,KC_TRNS
- ,KC_TRNS
- ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
- // right hand
- ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
- ,KC_TRNS ,KC_TRNS ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS
- ,KC_TRNS ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_TRNS ,KC_TRNS
- ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
- ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
- ,KC_TRNS ,KC_TRNS
- ,KC_TRNS
- ,KC_TRNS ,KC_PGUP ,KC_PGDN
- ),
-
-/* Keymap 3: Application select layer
- *
- * ,-----------------------------------------------------. ,-----------------------------------------------------.
- * | |Music |Slack |Emacs |Term |Chrome| | | | | | | | | |
- * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
- * | | | | | | | | | | | | | | | |
- * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
- * | | | | | | |------| |------| | | | | | |
- * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
- * | | | | | | | | | | | | | | | |
- * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
- * | | | | | | | | | | | |
- * `----------------------------------' `----------------------------------'
- * ,-------------. ,-------------.
- * | | | | | |
- * ,------|------|------| |------+------+------.
- * | | | | | | | |
- * | | |------| |------| | |
- * | | | | | | | |
- * `--------------------' `--------------------'
- */
-
-[APPSEL] = KEYMAP(
-// left hand
- KC_TRNS ,M(APP_MSIC),M(APP_SLK),M(APP_EMCS),M(APP_TERM),M(APP_CHRM),KC_TRNS
-,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
- ,KC_TRNS ,KC_TRNS
- ,KC_TRNS
- ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
- // right hand
- ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_TRNS
- ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
- ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
- ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
- ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
- ,KC_TRNS ,KC_TRNS
- ,KC_TRNS
- ,KC_TRNS ,KC_TRNS ,KC_TRNS
- ),
-
-
-/* Keymap 4: Hungarian Layer
- *
- * ,-----------------------------------------------------. ,-----------------------------------------------------.
- * | | | | | | | | | | | | | | | |
- * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
- * | | | Å | | Å° | | | | | | | | | | |
- * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
- * | | à | Ó | É | Ú | à |------| |------| | | | | | |
- * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
- * | | | Ö | | Ü | | | | | | | | | | |
- * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
- * | | | | | | | | | | | |
- * `----------------------------------' `----------------------------------'
- * ,-------------. ,-------------.
- * | | | | | |
- * ,------|------|------| |------+------+------.
- * | | | | | | | |
- * | | |------| |------| | |
- * | | | | | BASE | | |
- * `--------------------' `--------------------'
- */
-
-[HUN] = KEYMAP(
-// left hand
- KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
-,KC_NO ,KC_NO ,M(HU_OEE),KC_NO ,M(HU_UEE),KC_NO ,KC_NO
-,KC_NO ,M(HU_AA),M(HU_OO) ,M(HU_EE),M(HU_UU) ,M(HU_II)
-,KC_NO ,KC_NO ,M(HU_OE) ,KC_NO ,M(HU_UE) ,KC_NO ,KC_NO
-,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
-
- ,KC_NO ,KC_NO
- ,KC_NO
- ,KC_NO ,KC_TRNS ,KC_TRNS
-
- // right hand
- ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
-
- ,KC_NO ,KC_NO
- ,KC_NO
- ,F(F_BSE),KC_TRNS ,KC_TRNS
- ),
-
-/* Keymap 5: Navigation & Media layer
- *
- * ,-----------------------------------------------------. ,-----------------------------------------------------.
- * | MS Slow | | | | | |ScrLCK| |ScrLCK| | | | | | |
- * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
- * | MS Normal | | Home | Up | PgUp | | | |Scroll| |MsUpL | MsUp |MsUpR | |PrintScreen|
- * |-----------+------+------+------+------+------| | | Up |------+------+------+------+------+-----------|
- * | MS Fast | | Left | Down | Right| |------| |------| |MsLeft| MsDn |MsRght| | |
- * |-----------+------+------+------+------+------| | |Scroll|------+------+------+------+------+-----------|
- * | Play/Pause| | End | Down | PgDn | | | | Down | |MsDnL | MsDn |MsDnR | | Stop |
- * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
- * | | | | | | | | | | | |
- * `----------------------------------' `----------------------------------'
- * ,-------------. ,-------------.
- * | Mute | VlUp | | BASE | MClk |
- * ,------|------|------| |------+------+------.
- * | | | VlDn | | Prev |Left |Right |
- * | SPC | Enter|------| |------| Click| Click|
- * | | | ESC | | Next | | |
- * `--------------------' `--------------------'
- */
-[NMDIA] = KEYMAP(
-// left hand
- KC_ACL0 ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L)
-,KC_ACL1 ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO
-,KC_ACL2 ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO
-,KC_MPLY ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_NO
-,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_MUTE ,KC_VOLU
- ,KC_VOLD
- ,KC_SPC,KC_ENTER,M(A_ESC)
-
- // right hand
- ,LGUI(KC_L),KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_WH_U ,KC_NO ,M(A_MUL),KC_MS_U ,M(A_MUR),KC_NO ,KC_PSCR
- ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO ,KC_NO
- ,KC_WH_D ,KC_NO ,M(A_MDL),KC_MS_D ,M(A_MDR),KC_NO ,KC_MSTP
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
-
- ,KC_TRNS ,KC_MS_BTN3
- ,KC_MPRV
- ,KC_MNXT ,KC_BTN1 ,KC_BTN2
- ),
-
-/* Keymap 6: One-handed, left side
- *
- * ,-----------------------------------------------------.
- * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 |A BSE|
- * |-----------+------+------+------+------+-------------|
- * | Tab | ' | , | . | P | Y | [ |
- * |-----------+------+------+------+------+------| |
- * | - | A | O | E | U | I |------|
- * |-----------+------+------+------+------+------| ( |
- * | Play/Pause| ; | Q | J | K | X | |
- * `-----------+------+------+------+------+-------------'
- * | Home | End | Down | Up | ESC |
- * `-----------------------------------'
- * ,-------------.
- * | LAlt | GUI |
- * ,------|------|------|
- * |BackSp|LShift| Ctrl |
- * | | |------|
- * |Space |Enter |OTHER |
- * `--------------------'
- */
-[OHLFT] = KEYMAP(
-// left hand
- KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3) ,M(KF_4) ,M(KF_5) ,M(OH_BASE)
-,KC_TAB ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC
-,KC_MINS ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I
-,KC_MPLY ,KC_SCLN ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN
-,KC_HOME ,KC_END ,KC_DOWN ,KC_UP ,M(A_ESC)
-
- ,KC_TRNS ,KC_TRNS
- ,KC_TRNS
- ,M(OH_BSSPC),M(OH_ENTSFT),M(OH_RIGHT)
-
- // right hand
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
-
- ,KC_NO ,KC_NO
- ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO
- ),
-
-/* Keymap 7: One-handed, right side
- *
- * ,-----------------------------------------------------.
- * | = F11 | 0 F10| 9 F9 | 8 F8 | 7 F7 | 6 F6 |A BSE|
- * |-----------+------+------+------+------+-------------|
- * | / | L | R | C | G | F | ] |
- * |-----------+------+------+------+------+------| |
- * | \ | S | N | T | H | D |------|
- * |-----------+------+------+------+------+------| ) |
- * | Stop | Z | V | W | M | B | |
- * `-----------+------+------+------+------+-------------'
- * | PgDn | PgUp | Right| Left | ESC |
- * `-----------------------------------'
- * ,-------------.
- * | LAlt | GUI |
- * ,------|------|------|
- * |BackSp|LShift| Ctrl |
- * | | |------|
- * |Space |Enter |OTHER |
- * `--------------------'
- */
-[OHRGT] = KEYMAP(
-// left hand
- M(KF_11) ,M(KF_10) ,M(KF_9) ,M(KF_8) ,M(KF_7) ,M(KF_6) ,M(OH_BASE)
-,KC_SLSH ,KC_L ,KC_R ,KC_C ,KC_G ,KC_F ,KC_RBRC
-,KC_BSLS ,KC_S ,KC_N ,KC_T ,KC_H ,KC_D
-,KC_MSTP ,KC_Z ,KC_V ,KC_W ,KC_M ,KC_B ,KC_RPRN
-,KC_PGDN ,KC_PGUP ,KC_RGHT ,KC_LEFT ,M(A_ESC)
-
- ,KC_TRNS ,KC_TRNS
- ,KC_TRNS
- ,M(OH_BSSPC),M(OH_ENTSFT),M(OH_LEFT)
-
- // right hand
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
-
- ,KC_NO ,KC_NO
- ,KC_NO
- ,KC_NO ,KC_NO ,KC_NO
- ),
-
-/* Keymap 8: Steno for Plover
- *
- * ,--------------------------------------------------. ,--------------------------------------------------.
- * | | | | | | | BASE | | | | | | | | |
- * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
- * | | # | # | # | # | # | # | | # | # | # | # | # | # | # |
- * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
- * | | | T | P | H | |------| |------| | F | P | L | T | D |
- * |--------+ S +------+------+------+ * | * | | * | * +------+------+------+------+--------|
- * | | | K | W | R | | | | | | R | B | G | S | Z |
- * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
- * | | | | | | | | | | | |
- * `----------------------------------' `----------------------------------'
- * ,-------------. ,-------------.
- * | | | | | |
- * ,------|------|------| |------+------+------.
- * | | | | | | | |
- * | A | O |------| |------| E | U |
- * | | | | | | | |
- * `--------------------' `--------------------'
- */
-
-[PLVR] = KEYMAP(
-// left hand
-KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, M(A_PLVR),
-KC_NO, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM,
-KC_NO, PV_LS, PV_LT, PV_LP, PV_LH, PV_STAR,
-KC_NO, PV_LS, PV_LK, PV_LW, PV_LR, PV_STAR, PV_STAR,
-KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
- KC_NO, KC_NO,
- KC_NO,
- PV_A, PV_O, KC_NO,
-
- // right hand
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
- PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM,
- PV_STAR, PV_RF, PV_RP, PV_RL, PV_RT, PV_RD,
- PV_STAR, PV_STAR, PV_RR, PV_RB, PV_RG, PV_RS, PV_RZ,
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
- KC_NO, KC_NO,
- KC_NO,
- KC_NO,PV_E, PV_U
- ),
-
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [F_BSE] = ACTION_LAYER_CLEAR(ON_PRESS)
- ,[F_HUN] = ACTION_LAYER_INVERT(HUN, ON_PRESS)
- ,[F_GUI] = ACTION_MACRO_TAP(A_GUI)
- ,[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT)
- ,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT)
- ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL)
-};
-
-void toggle_steno(int pressed)
-{
- uint8_t layer = biton32(layer_state);
-
- if (pressed) {
- if (layer != PLVR) layer_on(PLVR); else layer_off(PLVR);
-
- register_code(PV_LP);
- register_code(PV_LH);
- register_code(PV_LR);
- register_code(PV_O);
- register_code(PV_RL);
- register_code(PV_RG);
- } else {
- unregister_code(PV_LP);
- unregister_code(PV_LH);
- unregister_code(PV_LR);
- unregister_code(PV_O);
- unregister_code(PV_RL);
- unregister_code(PV_RG);
- }
-}
-
-macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char)
-{
- uint8_t need_shift = 0;
- uint8_t hold_shift = 0;
-
- if (!record->event.pressed)
- return MACRO_NONE;
-
- layer_off (HUN);
-
- if (keyboard_report->mods & MOD_BIT (KC_LSFT)) {
- hold_shift = 1;
- need_shift = 1;
- unregister_code (KC_LSFT);
- }
- if ((get_oneshot_mods () & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out ()) {
- need_shift = 1;
- hold_shift = 0;
- unregister_code (KC_LSFT);
- }
-
- clear_oneshot_mods ();
-
- register_code (KC_RALT);
- unregister_code (KC_RALT);
- if (accent == (KC_DQT)) {
- register_code (KC_RSFT);
- }
- register_code (accent);
- unregister_code (accent);
- if (need_shift && accent != (KC_DQT)) {
- register_code (KC_RSFT);
- } else if (accent == (KC_DQT) && !need_shift) {
- unregister_code (KC_RSFT);
- }
- register_code (hun_char);
- unregister_code (hun_char);
- if (need_shift || accent == (KC_DQT))
- unregister_code (KC_RSFT);
- if (hold_shift)
- register_code (KC_LSFT);
-
- return MACRO_NONE;
-}
-
-void ang_handle_kf (keyrecord_t *record, uint8_t id)
-{
- uint8_t code = id - KF_1;
-
- if (record->event.pressed) {
- kf_timers[code] = timer_read ();
- } else {
- uint8_t kc;
-
- if (timer_elapsed (kf_timers[code]) > TAPPING_TERM) {
- // Long press
- kc = KC_F1 + code;
- } else {
- if (id == KF_11)
- kc = KC_EQL;
- else
- kc = KC_1 + code;
- }
-
- register_code (kc);
- unregister_code (kc);
- }
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- switch(id) {
- case A_ESC:
- if (record->event.pressed) {
- if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) {
- clear_oneshot_mods ();
- } else {
- register_code (KC_ESC);
- }
- layer_off (HUN);
- } else {
- unregister_code (KC_ESC);
- }
- break;
-
- case A_MPN:
- if (record->event.pressed) {
- if (keyboard_report->mods & MOD_BIT(KC_LSFT) ||
- ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) {
- int oneshot = ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out());
-
- if (oneshot)
- clear_oneshot_mods ();
- unregister_code (KC_LSFT);
-
- register_code (KC_MPRV);
- unregister_code (KC_MPRV);
-
- if (!oneshot)
- register_code (KC_LSFT);
- } else {
- return MACRO (T(MNXT), END);
- }
- }
- break;
-
- /* Hungarian layer */
- case HU_AA:
- return ang_do_hun (record, KC_QUOT, KC_A);
- case HU_OO:
- return ang_do_hun (record, KC_QUOT, KC_O);
- case HU_EE:
- return ang_do_hun (record, KC_QUOT, KC_E);
- case HU_UU:
- return ang_do_hun (record, KC_QUOT, KC_U);
- case HU_II:
- return ang_do_hun (record, KC_QUOT, KC_I);
- case HU_OE:
- return ang_do_hun (record, KC_DQT, KC_O);
- case HU_UE:
- return ang_do_hun (record, KC_DQT, KC_U);
- case HU_OEE:
- return ang_do_hun (record, KC_EQL, KC_O);
- case HU_UEE:
- return ang_do_hun (record, KC_EQL, KC_U);
-
- /* Mouse movement */
- case A_MUL:
- if (record->event.pressed) {
- mousekey_on(KC_MS_UP);
- mousekey_on(KC_MS_LEFT);
- } else {
- mousekey_off(KC_MS_UP);
- mousekey_off(KC_MS_LEFT);
- }
- mousekey_send();
- break;
-
- case A_MUR:
- if (record->event.pressed) {
- mousekey_on(KC_MS_UP);
- mousekey_on(KC_MS_RIGHT);
- } else {
- mousekey_off(KC_MS_UP);
- mousekey_off(KC_MS_RIGHT);
- }
- mousekey_send();
- break;
-
- case A_MDL:
- if (record->event.pressed) {
- mousekey_on(KC_MS_DOWN);
- mousekey_on(KC_MS_LEFT);
- } else {
- mousekey_off(KC_MS_DOWN);
- mousekey_off(KC_MS_LEFT);
- }
- mousekey_send();
- break;
-
- case A_MDR:
- if (record->event.pressed) {
- mousekey_on(KC_MS_DOWN);
- mousekey_on(KC_MS_RIGHT);
- } else {
- mousekey_off(KC_MS_DOWN);
- mousekey_off(KC_MS_RIGHT);
- }
- mousekey_send();
- break;
-
- /* Plover base */
- case A_PLVR:
- toggle_steno(record->event.pressed);
- break;
-
- /* GUI & AppSel */
- case A_GUI:
- if (record->event.pressed) {
- register_code (KC_LGUI);
- if (record->tap.count && !record->tap.interrupted) {
- if (record->tap.count >= 2) {
- register_code (KC_W);
- layer_on (APPSEL);
- set_oneshot_layer (APPSEL, ONESHOT_START);
- }
- } else {
- record->tap.count = 0;
- }
- gui_timer = 0;
- } else {
- if (record->tap.count >= 2)
- {
- unregister_code (KC_W);
- clear_oneshot_layer_state (ONESHOT_PRESSED);
- }
- gui_timer = timer_read ();
- }
- break;
-
- case APP_SLK:
- return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END);
-
- case APP_EMCS:
- return MACRODOWN(T(E), T(M), T(A), T(C), T(S), T(ENT), END);
-
- case APP_TERM:
- return MACRODOWN(T(T), T(E), T(R), T(M), T(ENT), END);
-
- case APP_CHRM:
- return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END);
-
- case APP_MSIC:
- return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END);
-
- /* Function keys */
- case KF_1 ... KF_11:
- ang_handle_kf (record, id);
- break;
-
- /* 1HAND layout */
- case OH_BASE:
- if (record->event.pressed) {
- oh_base_timer = timer_read ();
- } else {
- if (timer_elapsed (oh_base_timer) > TAPPING_TERM) {
- layer_clear ();
- } else {
- return MACRO (T(APP), END);
- }
- }
- break;
-
- case OH_BSSPC:
- if (record->event.pressed) {
- oh_bsspc_timer = timer_read ();
- } else {
- if (timer_elapsed (oh_bsspc_timer) > TAPPING_TERM) {
- return MACRO (T(BSPC), END);
- } else {
- return MACRO (T(SPC), END);
- }
- }
- break;
-
- case OH_ENTSFT:
- if (record->event.pressed) {
- oh_entsft_timer = timer_read ();
- } else {
- if (timer_elapsed (oh_entsft_timer) > TAPPING_TERM) {
- if (keyboard_report->mods & MOD_BIT(KC_LSFT))
- unregister_code (KC_LSFT);
- else
- register_code (KC_LSFT);
- } else {
- return MACRO (T(ENT), END);
- }
- }
- break;
-
- case OH_LEFT:
- if (record->event.pressed) {
- layer_move (OHLFT);
- oh_left_blink = 1;
- oh_left_blink_timer = timer_read ();
- ergodox_right_led_1_on ();
- }
- break;
-
- case OH_RIGHT:
- if (record->event.pressed) {
- layer_move (OHRGT);
- oh_right_blink = 1;
- oh_right_blink_timer = timer_read ();
- ergodox_right_led_3_on ();
- }
- break;
- }
- return MACRO_NONE;
-};
-
-uint8_t is_adore = 0;
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
- uint8_t dl;
-
- ergodox_led_all_on();
- for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) {
- ergodox_led_all_set (i);
- wait_ms (5);
- }
- wait_ms(1000);
- for (int i = LED_BRIGHTNESS_LO; i > 0; i--) {
- ergodox_led_all_set (i);
- wait_ms (10);
- }
- ergodox_led_all_off();
-
- if (!eeconfig_is_enabled())
- eeconfig_init();
- dl = eeconfig_read_default_layer ();
- if (dl == (1UL << ADORE))
- is_adore = 1;
-};
-
-LEADER_EXTERNS();
-
-void ang_do_unicode (void) {
- register_code (KC_RCTL);
- register_code (KC_RSFT);
- register_code (KC_U);
- unregister_code (KC_U);
- unregister_code (KC_RSFT);
- unregister_code (KC_RCTL);
- wait_ms (100);
-}
-
-void ang_tap (uint16_t codes[]) {
- for (int i = 0; codes[i] != 0; i++) {
- register_code (codes[i]);
- unregister_code (codes[i]);
- wait_ms (50);
- }
-}
-
-#define TAP_ONCE(code) \
- register_code (code); \
- unregister_code (code)
-
-void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) {
- if (state->count == 1) {
- register_code (KC_RSFT);
- register_code (KC_SCLN);
- } else if (state->count == 2) {
- register_code (KC_SCLN);
- }
-}
-
-void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) {
- if (state->count == 1) {
- unregister_code (KC_SCLN);
- unregister_code (KC_RSFT);
- } else if (state->count == 2) {
- unregister_code (KC_SCLN);
- }
-}
-
-void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) {
- if (state->count == 1) {
- register_code (KC_MINS);
- } else if (state->count == 2) {
- register_code (KC_RSFT);
- register_code (KC_MINS);
- }
-}
-
-void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) {
- if (state->count == 1) {
- unregister_code (KC_MINS);
- } else if (state->count == 2) {
- unregister_code (KC_RSFT);
- unregister_code (KC_MINS);
- }
-}
-
-typedef struct {
- bool layer_toggle;
- bool sticky;
- bool finished_once;
-} td_ta_state_t;
-
-void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) {
- td_ta_state_t *td_ta = (td_ta_state_t *) user_data;
-
- if (td_ta->finished_once) {
- return;
- }
-
- if (td_ta->sticky) {
- td_ta->sticky = false;
- td_ta->layer_toggle = false;
- layer_off (ARRW);
- return;
- }
-
- td_ta->finished_once = true;
- if (state->count == 1 && !state->pressed) {
- register_code (KC_TAB);
- td_ta->sticky = false;
- td_ta->layer_toggle = false;
- } else {
- td_ta->layer_toggle = true;
- layer_on (ARRW);
- td_ta->sticky = (state->count == 2);
- }
-}
-
-void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) {
- td_ta_state_t *td_ta = (td_ta_state_t *) user_data;
-
- if (!td_ta->layer_toggle)
- unregister_code (KC_TAB);
- if (!td_ta->sticky)
- layer_off (ARRW);
-
- td_ta->finished_once = false;
-}
-
-const qk_tap_dance_action_t tap_dance_actions[] = {
- [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset)
- ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset)
- ,[CT_TA] = {
- .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset },
- .user_data = (void *)&((td_ta_state_t) { false, false, false })
- }
-};
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {
- uint8_t layer = biton32(layer_state);
-
- if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM)
- unregister_code (KC_LGUI);
-
- if (layer != OHLFT)
- oh_left_blink = 0;
- if (layer != OHRGT)
- oh_right_blink = 0;
-
- if (layer == HUN) {
- ergodox_right_led_2_on();
- ergodox_right_led_3_on();
- } else if (layer == NMDIA) {
- ergodox_right_led_1_on();
- ergodox_right_led_2_on();
- } else if (layer == PLVR) {
- ergodox_right_led_1_on ();
- ergodox_right_led_2_on ();
- ergodox_right_led_3_on ();
- } else if (layer == ADORE) {
- ergodox_right_led_1_on ();
- ergodox_right_led_2_on ();
- ergodox_right_led_3_on ();
-
- ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
- }
-
- if (layer == OHLFT || layer == OHRGT) {
- ergodox_right_led_2_on();
-
- if (oh_left_blink) {
- if (timer_elapsed (oh_left_blink_timer) > OH_BLINK_INTERVAL) {
- if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) == 0)
- ergodox_right_led_1_off ();
- }
- if (timer_elapsed (oh_left_blink_timer) > OH_BLINK_INTERVAL * 2) {
- ergodox_right_led_1_on ();
- oh_left_blink_timer = timer_read ();
- }
- }
-
- if (oh_right_blink) {
- if (timer_elapsed (oh_right_blink_timer) > OH_BLINK_INTERVAL) {
- if ((keyboard_report->mods & MOD_BIT(KC_LCTRL)) == 0)
- ergodox_right_led_3_off ();
- }
- if (timer_elapsed (oh_right_blink_timer) > OH_BLINK_INTERVAL * 2) {
- ergodox_right_led_3_on ();
- oh_right_blink_timer = timer_read ();
- }
- }
- }
-
- if (keyboard_report->mods & MOD_BIT(KC_LSFT) ||
- ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) {
- ergodox_right_led_1_set (LED_BRIGHTNESS_HI);
- ergodox_right_led_1_on ();
- } else {
- ergodox_right_led_1_set (LED_BRIGHTNESS_LO);
- if (layer != OHLFT && layer != NMDIA && layer != PLVR && layer != ADORE)
- ergodox_right_led_1_off ();
- }
-
- if (keyboard_report->mods & MOD_BIT(KC_LALT) ||
- ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) {
- ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
- ergodox_right_led_2_on ();
- } else {
- ergodox_right_led_2_set (LED_BRIGHTNESS_LO);
- if (layer != OHRGT && layer != HUN && layer != OHLFT && layer != NMDIA && layer != PLVR && layer != ADORE)
- ergodox_right_led_2_off ();
- }
-
- if (keyboard_report->mods & MOD_BIT(KC_LCTRL) ||
- ((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) {
- ergodox_right_led_3_set (LED_BRIGHTNESS_HI);
- ergodox_right_led_3_on ();
- } else {
- ergodox_right_led_3_set (LED_BRIGHTNESS_LO);
- if (layer != OHRGT && layer != HUN && layer != PLVR && layer != ADORE)
- ergodox_right_led_3_off ();
- }
-
- LEADER_DICTIONARY() {
- leading = false;
- leader_end ();
-
-#if KEYLOGGER_ENABLE
- SEQ_ONE_KEY (KC_D) {
- ergodox_led_all_on();
- wait_ms(100);
- ergodox_led_all_off();
- log_enable = !log_enable;
- }
-#endif
-
- SEQ_ONE_KEY (KC_T) {
- time_travel = !time_travel;
- }
-
- SEQ_ONE_KEY (KC_U) {
- ang_do_unicode ();
- }
-
- SEQ_ONE_KEY (KC_V) {
- SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ (" QMK_VERSION "/" KEYMAP_VERSION ")");
- }
-
- SEQ_ONE_KEY (KC_L) {
- /* λ */
- ang_do_unicode ();
-
- uint16_t codes[] = {KC_0, KC_3, KC_B, KC_B, KC_ENT, 0};
- ang_tap (codes);
- }
-
- SEQ_ONE_KEY (KC_Y) {
- uint16_t codes[] = {KC_BSLS, KC_O, KC_SLSH, 0};
- ang_tap (codes);
- }
-
- SEQ_ONE_KEY (KC_S) {
- ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC);
- TAP_ONCE (KC_BSLS);
- register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT);
- ang_do_unicode (); TAP_ONCE (KC_3); TAP_ONCE (KC_0); TAP_ONCE (KC_C); TAP_ONCE (KC_4); TAP_ONCE (KC_SPC);
- register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT);
- TAP_ONCE (KC_SLSH);
- ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC);
- }
-
- SEQ_TWO_KEYS (KC_W, KC_M) {
- register_code (KC_LALT);
- register_code (KC_F2);
- unregister_code (KC_F2);
- unregister_code (KC_LALT);
-
- wait_ms (1000);
-
- uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0};
- ang_tap (codes);
- register_code (KC_LGUI);
- register_code (KC_UP);
- unregister_code (KC_UP);
- unregister_code (KC_LGUI);
- }
-
- SEQ_ONE_KEY (KC_A) {
- if (is_adore == 0) {
- default_layer_and (0);
- default_layer_or ((1UL << ADORE));
- eeconfig_update_default_layer ((1UL << ADORE));
- is_adore = 1;
-
- ergodox_led_all_off ();
- ergodox_right_led_3_on ();
- wait_ms (100);
- ergodox_right_led_2_on ();
- wait_ms (100);
- ergodox_right_led_3_off ();
- ergodox_right_led_1_on ();
- wait_ms (100);
- ergodox_right_led_2_off ();
- wait_ms (100);
- ergodox_right_led_1_off ();
- } else {
- is_adore = 0;
- default_layer_and (0);
- default_layer_or (1UL << BASE);
- eeconfig_update_default_layer ((1UL << BASE));
-
- ergodox_led_all_off ();
- ergodox_right_led_1_on ();
- wait_ms (100);
- ergodox_right_led_2_on ();
- wait_ms (100);
- ergodox_right_led_1_off ();
- ergodox_right_led_3_on ();
- wait_ms (100);
- ergodox_right_led_2_off ();
- wait_ms (100);
- ergodox_right_led_3_off ();
- }
- }
- }
-}
-
-static uint16_t last4[4];
-
-bool process_record_user (uint16_t keycode, keyrecord_t *record) {
-#if KEYLOGGER_ENABLE
- uint8_t layer = biton32(layer_state);
-
- if (log_enable && layer == BASE) {
- xprintf ("KL: col=%d, row=%d\n", record->event.key.col,
- record->event.key.row);
- }
-#endif
-
- if (time_travel && !record->event.pressed) {
- uint8_t p;
-
- // shift cache one to the left
- for (p = 0; p < 3; p++) {
- last4[p] = last4[p + 1];
- }
- last4[3] = keycode;
-
- if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) {
- uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0};
- ang_tap (codes);
- register_code (KC_RSFT);
- register_code (KC_EQL);
- unregister_code (KC_EQL);
- unregister_code (KC_RSFT);
-
- uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0};
- ang_tap (codes2);
-
- return false;
- }
- }
-
- return true;
-}
+ +/* Layers */ + +enum { + BASE = 0, + ADORE, + ARRW, + APPSEL, + HUN, + NMDIA, + PLVR, +}; + +/* Macros */ + +enum { + NONE = 0, + // Buttons that do extra stuff + A_GUI, + A_PLVR, + A_MPN, + + // Function / number keys + KF_1, // 1, F1 + KF_2, // 2, F2 + KF_3, // ... + KF_4, + KF_5, + KF_6, + KF_7, + KF_8, + KF_9, + KF_10, + + // Application select keys + APP_SLK, // Slack + APP_EMCS, // Emacs + APP_TERM, // Terminal + APP_CHRM, // Chrome + APP_MSIC, // Music + + // Diagonal mouse movement + A_MUL, + A_MUR, + A_MDL, + A_MDR, + + // Mouse acceleration + A_ACL0, + A_ACL1, + A_ACL2, + + // Hungarian layer keys + HU_AA, // à + HU_OO, // Ó + HU_EE, // É + HU_UU, // Ú + HU_II, // à + HU_OE, // Ö + HU_UE, // Ãœ + HU_OEE, // Å + HU_UEE, // Å° +}; + +/* Fn keys */ + +enum { + F_BSE = 0, + F_HUN, + F_GUI, + F_SFT, + F_ALT, + F_CTRL +}; + +/* Custom keycodes */ + +enum { + CT_CLN = 0, + CT_TA, + CT_LBP, + CT_RBP +}; + +/* States & timers */ + +uint16_t gui_timer = 0; + +uint16_t kf_timers[12]; + +#if KEYLOGGER_ENABLE +# ifdef AUTOLOG_ENABLE +bool log_enable = true; +# else +bool log_enable = false; +# endif +#endif + +bool time_travel = false; + +/* The Keymap */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Keymap 0: Base Layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | Next/Prev | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | F12 | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | ~ | ' | , | . | P | Y | ( | | ) | F | G | C | R | L | \ | + * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| + * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow | + * |-----------+------+------+------+------+------| : | | - |------+------+------+------+------+-----------| + * | Play/Pause| / | Q | J | K | X | | | | B | M | W | V | Z | Stop | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | : | | - | | | | | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | LAlt | GUI | | MDIA | Del | + * ,------|------|------| |------+------+------. + * | | | Ctrl | | LEAD | | | + * |Backsp|LShift|------| |------| Enter| Space| + * | | | ESC | | HUN | | | + * `--------------------' `--------------------' + */ +[BASE] = KEYMAP( +// left hand + M(A_MPN) ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) +,KC_GRV ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,TD(CT_LBP) +,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I +,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,TD(CT_CLN) +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) + + ,F(F_ALT),F(F_GUI) + ,F(F_CTRL) + ,KC_BSPC,F(F_SFT),KC_ESC + + // right hand + ,KC_F12 ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 + ,TD(CT_RBP),KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS + ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL + ,KC_MINS ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP + ,KC_MINS ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,OSL(NMDIA),KC_DEL + ,KC_LEAD + ,F(F_HUN) ,KC_ENT ,KC_SPC + ), + +/* Keymap 1: Adore layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | Play/Pause| 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | F12 | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | `~ | Y | W | G | L | M | ( | | ) | F | H | C | P | X | \ | + * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| + * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | Z | Q | ' | , | . | : | | - | B | K | V | J | / | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | LAlt | GUI | | MDIA | Del | + * ,------|------|------| |------+------+------. + * | | | Ctrl | | HUN | | | + * |Backsp|LShift|------| |------| Enter| Space| + * | | | ESC | | LEAD | | | + * `--------------------' `--------------------' + */ +[ADORE] = KEYMAP( +// left hand + KC_MPLY ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) +,KC_GRV ,KC_Y ,KC_W ,KC_G ,KC_L ,KC_M ,TD(CT_LBP) +,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U +,KC_NO ,KC_Z ,KC_Q ,KC_QUOT,KC_COMM,KC_DOT ,TD(CT_CLN) +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,F(F_ALT),F(F_GUI) + ,F(F_CTRL) + ,KC_BSPC,F(F_SFT),KC_ESC + + // right hand + ,KC_F12 ,M(KF_6),M(KF_7),M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 + ,TD(CT_RBP),KC_F ,KC_H ,KC_C ,KC_P ,KC_X ,KC_BSLS + ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL + ,KC_MINS ,KC_B ,KC_K ,KC_V ,KC_J ,KC_SLSH ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,OSL(NMDIA),KC_DEL + ,F(F_HUN) + ,KC_LEAD ,KC_ENT ,KC_SPC + ), + +/* Keymap 2: Arrow layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | | | | | | | | | Home | Up | End | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | |------| |------| | Left | Down | Rght | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | Enter| |------| |------| PgUp | PgDn | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[ARRW] = KEYMAP( +// left hand + KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_ENT ,KC_TRNS ,KC_TRNS + + // right hand + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_PGUP ,KC_PGDN + ), + +/* Keymap 3: Application select layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | |Music |Slack |Emacs |Term |Chrome| | | | | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | |------| |------| | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[APPSEL] = KEYMAP( +// left hand + KC_TRNS ,M(APP_MSIC),M(APP_SLK),M(APP_EMCS),M(APP_TERM),M(APP_CHRM),KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS + + // right hand + ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS + ), + + +/* Keymap 4: Hungarian Layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | Å | | Å° | | | | | | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | à | Ó | É | Ú | à |------| |------| | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | Ö | | Ãœ | | | | | | | | | | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | BASE | | | + * `--------------------' `--------------------' + */ + +[HUN] = KEYMAP( +// left hand + KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,M(HU_OEE),KC_NO ,M(HU_UEE),KC_NO ,KC_NO +,KC_NO ,M(HU_AA),M(HU_OO) ,M(HU_EE),M(HU_UU) ,M(HU_II) +,KC_NO ,KC_NO ,M(HU_OE) ,KC_NO ,M(HU_UE) ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,KC_NO ,KC_NO + ,KC_NO + ,KC_NO ,KC_TRNS ,KC_TRNS + + // right hand + ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,KC_NO ,KC_NO + ,KC_NO + ,F(F_BSE),KC_TRNS ,KC_TRNS + ), + +/* Keymap 5: Navigation & Media layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | MS Slow | | | | | |ScrLCK| |ScrLCK| | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | MS Normal | | Home | Up | PgUp | | | |Scroll| |MsUpL | MsUp |MsUpR | |PrintScreen| + * |-----------+------+------+------+------+------| | | Up |------+------+------+------+------+-----------| + * | MS Fast | | Left | Down | Right| |------| |------| |MsLeft| MsDn |MsRght| | | + * |-----------+------+------+------+------+------| | |Scroll|------+------+------+------+------+-----------| + * | Play/Pause| | End | Down | PgDn | | | | Down | |MsDnL | MsDn |MsDnR | | Stop | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Mute | VlUp | | BASE | MClk | + * ,------|------|------| |------+------+------. + * | | | VlDn | | Prev |Left |Right | + * | SPC | Enter|------| |------| Click| Click| + * | | | ESC | | Next | | | + * `--------------------' `--------------------' + */ +[NMDIA] = KEYMAP( +// left hand + M(A_ACL0) ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L) +,M(A_ACL1) ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO +,M(A_ACL2) ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO +,KC_MPLY ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_MUTE ,KC_VOLU + ,KC_VOLD + ,KC_SPC,KC_ENTER,KC_ESC + + // right hand + ,LGUI(KC_L),KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_WH_U ,KC_NO ,M(A_MUL),KC_MS_U ,M(A_MUR),KC_NO ,KC_PSCR + ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO ,KC_NO + ,KC_WH_D ,KC_NO ,M(A_MDL),KC_MS_D ,M(A_MDR),KC_NO ,KC_MSTP + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,KC_TRNS ,KC_MS_BTN3 + ,KC_MPRV + ,KC_MNXT ,KC_BTN1 ,KC_BTN2 + ), + +/* Keymap 6: Steno for Plover + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | BASE | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | # | # | # | # | # | # | | # | # | # | # | # | # | # | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | T | P | H | |------| |------| | F | P | L | T | D | + * |--------+ S +------+------+------+ * | * | | * | * +------+------+------+------+--------| + * | | | K | W | R | | | | | | R | B | G | S | Z | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | A | O |------| |------| E | U | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[PLVR] = KEYMAP( +// left hand +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, M(A_PLVR), +KC_NO, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, +KC_NO, PV_LS, PV_LT, PV_LP, PV_LH, PV_STAR, +KC_NO, PV_LS, PV_LK, PV_LW, PV_LR, PV_STAR, PV_STAR, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + PV_A, PV_O, KC_NO, + + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, + PV_STAR, PV_RF, PV_RP, PV_RL, PV_RT, PV_RD, + PV_STAR, PV_STAR, PV_RR, PV_RB, PV_RG, PV_RS, PV_RZ, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO,PV_E, PV_U + ), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [F_BSE] = ACTION_LAYER_CLEAR(ON_PRESS) + ,[F_HUN] = ACTION_LAYER_INVERT(HUN, ON_PRESS) + ,[F_GUI] = ACTION_MACRO_TAP(A_GUI) + ,[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT) + ,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT) + ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL) +}; + +static void toggle_steno(int pressed) +{ + uint8_t layer = biton32(layer_state); + + if (pressed) { + if (layer != PLVR) layer_on(PLVR); else layer_off(PLVR); + + register_code(PV_LP); + register_code(PV_LH); + register_code(PV_LR); + register_code(PV_O); + register_code(PV_RL); + register_code(PV_RG); + } else { + unregister_code(PV_LP); + unregister_code(PV_LH); + unregister_code(PV_LR); + unregister_code(PV_O); + unregister_code(PV_RL); + unregister_code(PV_RG); + } +} + +static macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) +{ + uint8_t need_shift = 0; + uint8_t hold_shift = 0; + + if (!record->event.pressed) + return MACRO_NONE; + + layer_off (HUN); + + if (keyboard_report->mods & MOD_BIT (KC_LSFT)) { + hold_shift = 1; + need_shift = 1; + unregister_code (KC_LSFT); + } + if ((get_oneshot_mods () & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out ()) { + need_shift = 1; + hold_shift = 0; + unregister_code (KC_LSFT); + } + + clear_oneshot_mods (); + + register_code (KC_RALT); + unregister_code (KC_RALT); + if (accent == (KC_DQT)) { + register_code (KC_RSFT); + } + register_code (accent); + unregister_code (accent); + if (need_shift && accent != (KC_DQT)) { + register_code (KC_RSFT); + } else if (accent == (KC_DQT) && !need_shift) { + unregister_code (KC_RSFT); + } + register_code (hun_char); + unregister_code (hun_char); + if (need_shift || accent == (KC_DQT)) + unregister_code (KC_RSFT); + if (hold_shift) + register_code (KC_LSFT); + + return MACRO_NONE; +} + +static bool from_appsel; + +static void ang_handle_kf (keyrecord_t *record, uint8_t id) +{ + uint8_t code = id - KF_1; + + if (record->event.pressed) { + kf_timers[code] = timer_read (); + } else { + uint8_t kc_base; + + if (from_appsel) { + from_appsel = false; + return; + } + + if (kf_timers[code] && timer_elapsed (kf_timers[code]) > TAPPING_TERM) { + // Long press + kc_base = KC_F1; + } else { + kc_base = KC_1; + } + kf_timers[code] = 0; + code += kc_base; + + register_code (code); + unregister_code (code); + } +} + +static struct { + uint8_t idx; +} m_accel_state; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case A_MPN: + if (record->event.pressed) { + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || + ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { + int oneshot = ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out()); + + if (oneshot) + clear_oneshot_mods (); + unregister_code (KC_LSFT); + + register_code (KC_MPRV); + unregister_code (KC_MPRV); + + if (!oneshot) + register_code (KC_LSFT); + } else { + return MACRO (T(MNXT), END); + } + } + break; + + /* Hungarian layer */ + case HU_AA: + return ang_do_hun (record, KC_QUOT, KC_A); + case HU_OO: + return ang_do_hun (record, KC_QUOT, KC_O); + case HU_EE: + return ang_do_hun (record, KC_QUOT, KC_E); + case HU_UU: + return ang_do_hun (record, KC_QUOT, KC_U); + case HU_II: + return ang_do_hun (record, KC_QUOT, KC_I); + case HU_OE: + return ang_do_hun (record, KC_DQT, KC_O); + case HU_UE: + return ang_do_hun (record, KC_DQT, KC_U); + case HU_OEE: + return ang_do_hun (record, KC_EQL, KC_O); + case HU_UEE: + return ang_do_hun (record, KC_EQL, KC_U); + +#if MOUSEKEY_ENABLE + /* Mouse movement */ + case A_MUL: + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_LEFT); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_LEFT); + } + mousekey_send(); + break; + + case A_MUR: + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_RIGHT); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_RIGHT); + } + mousekey_send(); + break; + + case A_MDL: + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_LEFT); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_LEFT); + } + mousekey_send(); + break; + + case A_MDR: + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_RIGHT); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_RIGHT); + } + mousekey_send(); + break; + + case A_ACL0 ... A_ACL2: + if (record->event.pressed) { + uint8_t idx = id - A_ACL0; + if (m_accel_state.idx == id) { + mousekey_off(m_accel_state.idx - A_ACL0 + KC_ACL0); + m_accel_state.idx = 0; + } else { + if (m_accel_state.idx) { + mousekey_off(m_accel_state.idx - A_ACL0 + KC_ACL0); + m_accel_state.idx = 0; + } + mousekey_on(KC_ACL0 + idx); + m_accel_state.idx = id; + } + } + break; +#endif + + /* Plover base */ + case A_PLVR: + toggle_steno(record->event.pressed); + break; + + /* GUI & AppSel */ + case A_GUI: + if (record->event.pressed) { + register_code (KC_LGUI); + if (record->tap.count && !record->tap.interrupted) { + if (record->tap.count >= 2) { + register_code (KC_W); + layer_on (APPSEL); + set_oneshot_layer (APPSEL, ONESHOT_START); + } + } else { + record->tap.count = 0; + } + gui_timer = 0; + } else { + if (record->tap.count >= 2) + { + unregister_code (KC_W); + clear_oneshot_layer_state (ONESHOT_PRESSED); + } + gui_timer = timer_read (); + } + break; + + case APP_SLK: + from_appsel = true; + return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END); + + case APP_EMCS: + from_appsel = true; + return MACRODOWN(T(G), T(N), T(U), T(SPC), T(E), T(M), T(A), T(C), T(S), T(SPC), T(2), T(4), T(ENT), END); + + case APP_TERM: + from_appsel = true; + if (!record->event.pressed) { + register_code(KC_ESC); + unregister_code(KC_ESC); + wait_ms(TAPPING_TERM + 25); + register_code(KC_DEL); + unregister_code(KC_DEL); + } + break; + + case APP_CHRM: + from_appsel = true; + return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END); + + case APP_MSIC: + from_appsel = true; + return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END); + + /* Function keys */ + case KF_1 ... KF_10: + ang_handle_kf (record, id); + break; + } + + return MACRO_NONE; +}; + +static uint8_t is_adore = 0; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + uint8_t dl; + + set_unicode_input_mode(UC_LNX); + + ergodox_led_all_on(); + for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) { + ergodox_led_all_set (i); + wait_ms (5); + } + wait_ms(1000); + for (int i = LED_BRIGHTNESS_LO; i > 0; i--) { + ergodox_led_all_set (i); + wait_ms (10); + } + ergodox_led_all_off(); + + if (!eeconfig_is_enabled()) + eeconfig_init(); + dl = eeconfig_read_default_layer (); + if (dl == (1UL << ADORE)) { + is_adore = 1; + } +}; + +LEADER_EXTERNS(); + +static void ang_tap (uint8_t code, ...) { + uint8_t kc = code; + va_list ap; + + va_start(ap, code); + + do { + register_code(kc); + unregister_code(kc); + wait_ms(50); + kc = va_arg(ap, int); + } while (kc != 0); + va_end(ap); +} + +#define TAP_ONCE(code) \ + register_code (code); \ + unregister_code (code) + +typedef struct { + bool layer_toggle; + bool sticky; +} td_ta_state_t; + +static void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { + td_ta_state_t *td_ta = (td_ta_state_t *) user_data; + + if (td_ta->sticky) { + td_ta->sticky = false; + td_ta->layer_toggle = false; + layer_off (ARRW); + return; + } + + if (state->count == 1 && !state->pressed) { + register_code (KC_TAB); + td_ta->sticky = false; + td_ta->layer_toggle = false; + } else { + td_ta->layer_toggle = true; + layer_on (ARRW); + td_ta->sticky = (state->count == 2); + } +} + +static void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { + td_ta_state_t *td_ta = (td_ta_state_t *) user_data; + + if (!td_ta->layer_toggle) + unregister_code (KC_TAB); + if (!td_ta->sticky) + layer_off (ARRW); +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [CT_CLN] = ACTION_TAP_DANCE_DOUBLE (KC_COLN, KC_SCLN) + ,[CT_TA] = { + .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset }, + .user_data = (void *)&((td_ta_state_t) { false, false }) + } + ,[CT_LBP] = ACTION_TAP_DANCE_DOUBLE (KC_LBRC, KC_LPRN) + ,[CT_RBP] = ACTION_TAP_DANCE_DOUBLE (KC_RBRC, KC_RPRN) +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + bool is_arrow = false; + + if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM) + unregister_code (KC_LGUI); + + if (layer == HUN) { + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + } else if (layer == NMDIA) { + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + } else if (layer == PLVR) { + ergodox_right_led_1_on (); + ergodox_right_led_2_on (); + ergodox_right_led_3_on (); + } else if (layer == ADORE) { + ergodox_right_led_1_on (); + ergodox_right_led_2_on (); + ergodox_right_led_3_on (); + + ergodox_right_led_2_set (LED_BRIGHTNESS_HI); + } + + if (layer_state & (1UL << ARRW)) { + ergodox_right_led_1_on (); + ergodox_right_led_3_on (); + is_arrow = true; + } + + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || + ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { + ergodox_right_led_1_set (LED_BRIGHTNESS_HI); + ergodox_right_led_1_on (); + } else { + ergodox_right_led_1_set (LED_BRIGHTNESS_LO); + if (layer != NMDIA && layer != PLVR && layer != ADORE && !is_arrow) + ergodox_right_led_1_off (); + } + + if (keyboard_report->mods & MOD_BIT(KC_LALT) || + ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) { + ergodox_right_led_2_set (LED_BRIGHTNESS_HI); + ergodox_right_led_2_on (); + } else { + ergodox_right_led_2_set (LED_BRIGHTNESS_LO); + if (layer != HUN && layer != NMDIA && layer != PLVR && layer != ADORE) + ergodox_right_led_2_off (); + } + + if (keyboard_report->mods & MOD_BIT(KC_LCTRL) || + ((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) { + ergodox_right_led_3_set (LED_BRIGHTNESS_HI); + ergodox_right_led_3_on (); + } else { + ergodox_right_led_3_set (LED_BRIGHTNESS_LO); + if (layer != HUN && layer != PLVR && layer != ADORE && !is_arrow) + ergodox_right_led_3_off (); + } + + LEADER_DICTIONARY() { + leading = false; + leader_end (); + +#if KEYLOGGER_ENABLE + SEQ_ONE_KEY (KC_D) { + ergodox_led_all_on(); + wait_ms(100); + ergodox_led_all_off(); + log_enable = !log_enable; + } +#endif + + SEQ_ONE_KEY (KC_Q) { + register_code16 (LCTL(KC_1)); + unregister_code16 (LCTL(KC_1)); + } + + SEQ_ONE_KEY (KC_T) { + time_travel = !time_travel; + } + + SEQ_ONE_KEY (KC_U) { + qk_ucis_start(); + } + + SEQ_ONE_KEY (KC_V) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ (" QMK_VERSION "/" KEYMAP_VERSION ")"); + } + + SEQ_ONE_KEY (KC_L) { + /* λ */ + unicode_input_start(); + register_hex(0x03bb); + unicode_input_finish(); + } + + SEQ_ONE_KEY (KC_Y) { + ang_tap (KC_BSLS, KC_O, KC_SLSH, 0); + } + + SEQ_ONE_KEY (KC_S) { + unicode_input_start(); register_hex(0xaf); unicode_input_finish(); + TAP_ONCE (KC_BSLS); + register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT); + unicode_input_start (); register_hex(0x30c4); unicode_input_finish(); + register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT); + TAP_ONCE (KC_SLSH); + unicode_input_start (); register_hex(0xaf); unicode_input_finish(); + } + + SEQ_TWO_KEYS (KC_W, KC_M) { + register_code (KC_LALT); + register_code (KC_F2); + unregister_code (KC_F2); + unregister_code (KC_LALT); + + wait_ms (1000); + + ang_tap (KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0); + register_code (KC_LGUI); + register_code (KC_UP); + unregister_code (KC_UP); + unregister_code (KC_LGUI); + } + + SEQ_ONE_KEY (KC_A) { + if (is_adore == 0) { + default_layer_and (0); + default_layer_or ((1UL << ADORE)); + eeconfig_update_default_layer ((1UL << ADORE)); + is_adore = 1; + + ergodox_led_all_off (); + ergodox_right_led_3_on (); + wait_ms (100); + ergodox_right_led_2_on (); + wait_ms (100); + ergodox_right_led_3_off (); + ergodox_right_led_1_on (); + wait_ms (100); + ergodox_right_led_2_off (); + wait_ms (100); + ergodox_right_led_1_off (); + } else { + is_adore = 0; + default_layer_and (0); + default_layer_or (1UL << BASE); + eeconfig_update_default_layer ((1UL << BASE)); + + ergodox_led_all_off (); + ergodox_right_led_1_on (); + wait_ms (100); + ergodox_right_led_2_on (); + wait_ms (100); + ergodox_right_led_1_off (); + ergodox_right_led_3_on (); + wait_ms (100); + ergodox_right_led_2_off (); + wait_ms (100); + ergodox_right_led_3_off (); + } + } + } +} + +static uint16_t last4[4]; + +const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE +( + UCIS_SYM("poop", 0x1f4a9), + UCIS_SYM("rofl", 0x1f923), + UCIS_SYM("kiss", 0x1f619), + UCIS_SYM("snowman", 0x2603), + UCIS_SYM("coffee", 0x2615), + UCIS_SYM("heart", 0x2764), + UCIS_SYM("bolt", 0x26a1) +); + +bool process_record_user (uint16_t keycode, keyrecord_t *record) { +#if KEYLOGGER_ENABLE + if (log_enable) { + xprintf ("KL: col=%02d, row=%02d, pressed=%d, layer=%s\n", record->event.key.col, + record->event.key.row, record->event.pressed, (is_adore) ? "ADORE" : "Dvorak"); + } +#endif + + if (keycode == KC_ESC && record->event.pressed) { + bool queue = true; + + if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) { + clear_oneshot_mods (); + queue = false; + } + if (layer_state & (1UL<<HUN)) { + layer_off (HUN); + queue = false; + } + return queue; + } + + if (time_travel && !record->event.pressed) { + uint8_t p; + + // shift cache one to the left + for (p = 0; p < 3; p++) { + last4[p] = last4[p + 1]; + } + last4[3] = keycode; + + if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) { + ang_tap (KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0); + register_code (KC_RSFT); + register_code (KC_EQL); + unregister_code (KC_EQL); + unregister_code (KC_RSFT); + + ang_tap (KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0); + + return false; + } + } + + return true; +} + +void qk_ucis_symbol_fallback (void) { + for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) { + uint8_t code; + + if (qk_ucis_state.codes[i] > KF_1) + code = qk_ucis_state.codes[i] - KF_1 + KC_1; + else + code = qk_ucis_state.codes[i]; + register_code(code); + unregister_code(code); + wait_ms (10); + } +} diff --git a/keyboards/ergodox/keymaps/algernon/readme.md b/keyboards/ergodox/keymaps/algernon/readme.md index 6fe1775111..5e7adb3320 100644 --- a/keyboards/ergodox/keymaps/algernon/readme.md +++ b/keyboards/ergodox/keymaps/algernon/readme.md @@ -3,11 +3,15 @@ algernon's layout ======================= -This is an unconventional layout for the ErgoDox EZ. For more details about the history of the layout, see my [blog posts about my ErgoDox journey][blog-ergodox]. +This is an unconventional layout for the [ErgoDox EZ][ez]. For more details about the history of the layout, see my [blog posts about my ErgoDox journey][blog-ergodox]. + [ez]: https://ergodox-ez.com/ [blog-ergodox]: https://asylum.madhouse-project.org/blog/tags/ergodox/ -Some of the things in the layout only work when one uses Spacemacs and GNOME under Linux. Your mileage may vary. +Some of the things in the layout only work when one uses [Spacemacs][spacemacs] and [GNOME][gnome] under Linux. Your mileage may vary. + + [spacemacs]: http://spacemacs.org/ + [gnome]: https://www.gnome.org/ ## Table of Contents @@ -16,11 +20,12 @@ Some of the things in the layout only work when one uses Spacemacs and GNOME und - [ADORE layer](#adore-layer) - [Hungarian layer](#hungarian-layer) - [Navigation and media layer](#navigation-and-media-layer) - - [One-handed layer](#one-handed-layer) - [Steno layer](#steno-layer) - [LED states](#led-states) * [Tools](#tools) - [Heatmap](#heatmap) +* [Special features](#special-features) + - [Unicode Symbol Input](#unicode-symbol-input) * [Building](#building) - [Using on Windows](#using-on-windows) * [Changelog](#changelog) @@ -38,11 +43,11 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest * The `Shift`, `Alt`, and `Control` modifiers are one-shot. When tapped, they are considered active for the next key press only. When double tapped, they toggle on, until a third, single tap sometime later. When held, they act as expected. My usual pattern is that I use these for the next keypress only, so this behaviour is perfect. If I need them held, I'll just double-tap. * The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout. * The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode. -* The **Media** and **Hun** layer keys are one-shot, the **1Hand** and **STENO** keys are toggles. -* When holding any of the **Arrow** layer keys, the arrow layer activates while the layer key is held. Tapping the key produces the normal key. +* The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle. +* When holding the `Tab`/**Arrow** key, the arrow layer activates while the key is held. Tapping the key produces the normal, `Tab` key. Double-tapping it toggles the **Arrow** layer on until a third tap. * Tapping the `:` key once yields `:`, tapping it twice yields `;`. +* Tapping the `[{(`/`)}]` keys once yields `[` (or `{` when shifted), tapping them twice yields `(`. * The **Lead** key allows me to type in a sequence of keys, and trigger some actions: - - `LEAD u` enters unicode input mode, by sending the GTK+ key sequence that does this. - `LEAD l` uses the unicode input method to enter a `λ`. - `LEAD s` does a lot of magic to type in a shruggie: `¯\_(ツ)_/¯` - `LEAD y` types `\o/`. @@ -51,6 +56,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest - `LEAD v` prints the firmware version, the keyboard and the keymap. - `LEAD d` toggles logging keypress positions to the HID console. - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader. + - `LEAD u` enters the [Unicode symbol input](#unicode-symbol-input) mode. ## ADORE layer @@ -74,20 +80,6 @@ On this layer, the accented characters are at the same position as their base va This layer is primarily for navigating with the cursor or the mouse, and some media things. -## One-handed layer - -[](http://www.keyboard-layout-editor.com/#/gists/edff2495135955b8963198dace7f7ece) - -The one-handed layer is used in situations where the right hand is occupied, by mousing around, for example. Tapping the `OTHER` key switches which side is active. For the most part, keys remain in their usual position. When the right half is active, keys are mirrored to the left half. - -The differences are as follows: - -* The `ESC` key has been moved to the bottom row, so the `OTHER` key is easier to tap. -* Most keys on the thumb cluster now have dual uses, and these do not change when switching sides: - - The `Space`/`Backspace` key sends `Space` on tap, `Backspace` when held for longer than a normal tap. - - The `Enter`/`Shift` key sends `Enter` on short-tap, `Shift` on long-tap. -* The `Apps`/`BASE` key can be used to go back to the base layer, by long-tapping it. A short-tap will send the `App` key, as usual. - ## Steno layer [](http://www.keyboard-layout-editor.com/#/gists/401ef9a84369e47c57f9aedcf0a0d667) @@ -103,18 +95,33 @@ For the layers, the following rules apply: * When the [ADORE layer](#adore-layer) is toggled on, LEDs will light up from left to right in a sequence, then turn off. When the layer is toggled off, the LEDs light up and turn off in the other direction. No LEDs are on while the layer is active. * When the [Hungarian layer](#hungarian-layer) is active, the *green* and *blue* LEDs are on. * When the [Navigation and media layer](#navigation-and-media-layer) is active, the *red* and *green* ones are on. -* When the [One-handed layer](#one-handed-layer) is active, the *green* LED is on and bright, and either the *red* or the *blue* one is going to slowly blink, depending on the currently active side. +* When the **ARROW** layer is active, the *red* and *blue* ones are on. * For the [Steno layer](#steno-layer), all LEDs will be turned on. Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers use a stronger one, and modifiers override any layer preferences. For example, when on the one-handed layer, with the left side active (*red* light blinking), if `Shift` is on, the *red* light will be constantly on. +# Special features + +## Unicode Symbol Input + +Once in the Unicode Symbol Input mode, one is able to type in symbol names, press `Enter` or `Space`, and get the Unicode symbol itself back. When in the mode, a capital `U` is printed first. Once the sequence is finished, all of it is erased by sending enough `Backspace` taps, and the firmware starts the OS-specific unicode input sequence. Then, it looks up the symbol name, and enters the associated code. If it is not found, it will just replay the pressed keycodes. + +The currently supported symbols are: + +- `snowman`: ☃ +- `kiss`: 😙 +- `rofl`: 🤣 +- `poop`: 💩 + +This is an experimental feature, and may or may not work reliably. + # Tools ## Heatmap When the keypress logging functionality is enabled (by `LEAD d`), the keyboard will output a line every time a key is pressed, containing the position of the key in the matrix. This allows one to collect this information, and build analytics over it, such as a heat map, including dead keys too. -Included with the firmware is a small tool that can parse these logs, and create a heatmap that one can import into [KLE][kle]. To use it, simply point `tools/log-to-heatmap.py` to a base layout file (one is included in the `tools/` directory), and the key position log. The latter one can create by running `hid-listen`, and redirecting its output to a file. +Included with the firmware is a small tool that can parse these logs, and create a heatmap that one can import into [KLE][kle]. To use it, either pipe the output of `hid_listen` into it, or pipe it an already saved log, and it will save the results into files in an output directory (given on the command-line). See the output of `tools/log-to-heatmap.py --help` for more information. [kle]: http://www.keyboard-layout-editor.com/ @@ -133,14 +140,14 @@ To make my workflow easier, this layout is maintained in [its own repository][al $ git clone https://github.com/jackhumbert/qmk_firmware.git $ cd qmk_firmware $ git clone https://github.com/algernon/ergodox-layout.git \ - keyboards/ergodox_ez/keymaps/algernon-master -$ make KEYBOARD=ergodox_ez KEYMAP=algernon-master + keyboards/ergodox/keymaps/algernon-master +$ make keyboard=ergodox keymap=algernon-master ``` From time to time, updates may be submitted back to the QMK repository. If you are reading it there, you can build the firmware like any other firmware included with it (assuming you are in the root directory of the firmware): ``` -$ make KEYBOARD=ergodox_ez KEYMAP=algernon +$ make keyboard=ergodox keymap=algernon ``` ## Using on Windows @@ -149,7 +156,47 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the # Changelog -## v1.4 - 2016-07-29 +## v1.6 + +*2016-08-24* + +### Base layer changes + +* The parentheses & bracket keys have been merged: tapping them results in `[` or `{` (if it was shifted), double tapping leads to `(`. +* The `:;` and `-_` keys are now available on the base layer, on their [ADORE](#adore-layer) location, too, just below `[{(`/`]})`. +* The `Apps` key has been replaced by `F12`. +* The `-`/`_` is no longer a tap-dance key. + +### ADORE layer changes + +* Adjustments were made to the [ADORE](#adore-layer) layer, to separate some inconvenient combinations. + +### Miscellaneous changes + +* `LEAD u` now starts the symbolic unicode input system, instead of the OS-one. +* The mouse acceleration keys on the [Navigation and Media](#navigation-and-media-layer) layer have been turned into toggles: tap them once to turn them on, until tapped again. Tapping an accelerator button will turn all the others off. +* When the **ARROW** layer is on, the *red* and *blue* LEDs light up now. + +### Heatmap + +* The built-in keylogger has been greatly enhanced, it now outputs the pressed state, and the layer (Dvorak or ADORE). As such, the `ADORE_AUTOLOG` option has been removed, instead there is `AUTOLOG_ENABLE` now, which when enabled, makes the keylogger start when the keyboard boots. It defaults to off. +* The heatmap generator received a lot of updates. + +## v1.5 + +*2016-08-12* + +* The **1HAND** layer has been removed. +* A `Delete` key is now available on the right thumb cluster. +* The [ADORE](#adore-layer) layer received a major update, see the layout image above. +* It is now possible to enable automatic logging for the [ADORE](#adore-layer) layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default. +* The `~` key and the `Media Next/Prev` key have been swapped on the [base layer](#base-layer). +* On the **ARROW** layer, `Backspace` has been replaced by `Enter`. +* There is some experimental support for entering Unicode symbols. + +## v1.4 + +*2016-07-29* * When toggling the key logging on or off, the LEDs will do a little dance. * The keylogger is now optional, but enabled by default. Use `KEYLOGGER_ENABLE=no` on the `make` command line to disable it. @@ -157,14 +204,18 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the * The `-`/`_` key was turned into a tap-dance key too. * There is now a way to travel time with the keyboard, toggle the feature on by hitting `LEAD t`. -## v1.3 - 2016-07-06 +## v1.3 + +*2016-07-06* * Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a [heatmap](#heatmap) out of the logs. * The arrow and navigation keys were rearranged again, and now require an additional key being held to activate. See the [base layer](#base-layer) for an image that shows where arrows are. * The **experimental** layer has been redone, and is now called [ADORE](#adore-layer), and as such, can be enabled by `LEAD a` now. * Switching between Dvorak and ADORE is now persisted into EEPROM, and survives a reboot. -## v1.2 - 2016-06-22 +## v1.2 + +*2016-06-22* * The forced NKRO mode can be easily toggled off at compile-time, to make the firmware compatible with [certain operating systems](#using-on-windows). * The `:;` key has changed behaviour: to access the `;` symbol, the key needs to be double-tapped, instead of shifted. @@ -175,7 +226,9 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the * On the **experimental** layer, the `L` and `Q`, and the `K` and `G` keys were swapped. * The [Steno](#steno-layer) layer gained a few more `#` and `*` keys, to make it easier on my fingers. -## v1.1 - 2016-06-14 +## v1.1 + +*2016-06-14* * The keyboard starts in NKRO mode, bootmagic and other things are disabled. * A [Steno](#steno-layer) layer was added, to be used with Plover. @@ -189,7 +242,9 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the - `:` now inputs `;` when shifted. * `ESC` cancels the [Hungarian](#hungarian-layer) layer too, not just modifiers. -## v1.0 - 2016-05-26 +## v1.0 + +*2016-05-26* Initial version. diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json index 544f61ce87..4dfa877a78 100644 --- a/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json +++ b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.ADORE.json @@ -75,9 +75,9 @@ "STENO", { "x": 4.5, - "f": 6 + "f": 3 }, - "<i class='mss mss-Unicode-Option-3'></i>", + "F12", { "c": "#7adabd", "a": 4, @@ -94,12 +94,20 @@ { "y": -0.875, "c": "#ffb2d2", - "f": 3, + "f": 9, + "a": 6, "w": 1.5 }, - "\n\n~\n`", + "\n\n<i class='kb kb-Multimedia-Play-Pause'></i>", { - "t": "#0d0d0b" + "t": "#0d0d0b", + "f": 3, + "a": 4, + "fa": [ + 0, + 0, + 2 + ] }, "!\n1\nF1", { @@ -120,7 +128,7 @@ "t": "#000000", "a": 6 }, - "L", + "G", { "x": 10.5 }, @@ -132,16 +140,16 @@ "x": 2.5, "c": "#bfbad1", "t": "#0d0d0b", - "a": 4 + "a": 6 }, - ">\n.", + "W", { "x": 1, "c": "#7adabd", "t": "#000000", "a": 6 }, - "W", + "L", { "x": 8.5 }, @@ -164,14 +172,15 @@ { "c": "#93c9b7", "a": 4, + "fa": [0, 0, 0], "h": 1.5 }, - "{\n[", + "{\n(\n[", { "x": 4.5, "h": 1.5 }, - "}\n]", + "}\n)\n]", { "c": "#7adabd", "a": 6 @@ -183,21 +192,22 @@ "y": -0.875, "c": "#ffb07b", "t": "#0d0d0b", - "f": 6, + "f": 3, + "a": 4, "w": 1.5 }, - "<i class='fa fa-fast-backward'></i>\n\n<i class='fa fa-fast-forward'></i>", + "\n\n~\n`", { "c": "#ffb2d2", - "a": 4, + "a": 6, "f": 3 }, - "<\n,", + "Y", { "x": 14.5, "a": 6 }, - "Y", + "X", { "a": 4, "w": 1.5 @@ -300,15 +310,14 @@ "x": 6.5, "c": "#93c9b7", "t": "#000000", - "a": 7, "h": 1.5 }, - "(", + ";\n:", { "x": 4.5, "h": 1.5 }, - ")" + "_\n-" ], [ { @@ -320,7 +329,9 @@ }, "\"\n'", { - "x": 10.5 + "x": 10.5, + "a": 6, + "f": 3 }, "V" ], @@ -329,19 +340,22 @@ "y": -0.875, "x": 2.5, "c": "#bfbad1", - "t": "#0d0d0b" + "t": "#0d0d0b", + "a": 6 }, - "Z", + "Q", { "x": 1, "c": "#7adabd", - "t": "#000000" + "t": "#000000", + "a": 4 }, - "K", + "<\n,", { - "x": 8.5 + "x": 8.5, + "a": 6 }, - "G", + "K", { "x": 1, "c": "#bfbad1", @@ -354,11 +368,13 @@ "y": -0.875, "x": 5.5, "c": "#7adabd", - "t": "#000000" + "t": "#000000", + "a": 4 }, - "X", + ">\n.", { - "x": 6.5 + "x": 6.5, + "a": 6 }, "B" ], @@ -367,28 +383,32 @@ "y": -0.875, "c": "#ffb07b", "f": 9, - "w": 1.5 + "w": 1.5, + "g": true }, - "\n\n<i class='kb kb-Multimedia-Play-Pause'></i>", + "", { "c": "#ffb2d2", "t": "#0d0d0b", - "a": 4, - "f": 3 + "a": 6, + "f": 3, + "g": false }, - "?\n/", + "Z", { "x": 14.5, - "a": 6 + "a": 4 }, - "Q", + "?\n/", { "c": "#ffb07b", "t": "#000000", "f": 9, - "w": 1.5 + "g": true, + "w": 1.5, + "a": 4 }, - "<i class='kb kb-Multimedia-Stop'></i>" + "" ], [ { @@ -414,14 +434,14 @@ { "x": 1, "c": "#d4872a", - "g": false, + "g": true, "a": 5 }, - ";\n:", + "", { "x": 8.5 }, - "_\n-", + "", { "x": 1, "c": "#d9dae0", @@ -503,13 +523,13 @@ }, "MEDIA", {}, - "1HAND" + "DEL" ], [ { "x": -3 }, - "LEAD", + "HUN", { "c": "#d4872a", "f": 9, @@ -528,6 +548,6 @@ "c": "#f9cd31", "f": 2 }, - "HUN" + "LEAD" ] ] diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json index 148bb1f23b..1248d36af7 100644 --- a/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json +++ b/keyboards/ergodox/keymaps/algernon/tools/heatmap-layout.Dvorak.json @@ -75,9 +75,9 @@ "STENO", { "x": 4.5, - "f": 6 + "f": 3 }, - "<i class='mss mss-Unicode-Option-3'></i>", + "F12", { "c": "#7adabd", "a": 4, @@ -94,12 +94,21 @@ { "y": -0.875, "c": "#ffb2d2", - "f": 3, + "f": 6, + "a": 6, "w": 1.5 }, - "\n\n~\n`", + "<i class='fa fa-fast-backward'></i>\n\n<i class='fa fa-fast-forward'></i>", { - "t": "#0d0d0b" + "f": 3, + "t": "#0d0d0b", + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + }, "!\n1\nF1", { @@ -167,12 +176,12 @@ "a": 4, "h": 1.5 }, - "{\n[", + "{\n(\n[", { "x": 4.5, "h": 1.5 }, - "}\n]", + "}\n)\n]", { "c": "#7adabd", "a": 6 @@ -184,10 +193,10 @@ "y": -0.875, "c": "#ffb07b", "t": "#0d0d0b", - "f": 6, + "f": 3, "w": 1.5 }, - "<i class='fa fa-fast-backward'></i>\n\n<i class='fa fa-fast-forward'></i>", + "\n\n~\n`", { "c": "#ffb2d2", "a": 4, @@ -503,7 +512,7 @@ }, "MEDIA", {}, - "1HAND" + "DEL" ], [ { diff --git a/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py b/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py index a13d12e81a..68585843be 100755 --- a/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py +++ b/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py @@ -3,143 +3,247 @@ import json import os import sys import re +import argparse from math import floor +from os.path import dirname + +class Heatmap(object): + coords = [ + [ + # Row 0 + [ 4, 0], [ 4, 2], [ 2, 0], [ 1, 0], [ 2, 2], [ 3, 0], [ 3, 2], + [ 3, 4], [ 3, 6], [ 2, 4], [ 1, 2], [ 2, 6], [ 4, 4], [ 4, 6], + ], + [ + # Row 1 + [ 8, 0], [ 8, 2], [ 6, 0], [ 5, 0], [ 6, 2], [ 7, 0], [ 7, 2], + [ 7, 4], [ 7, 6], [ 6, 4], [ 5, 2], [ 6, 6], [ 8, 4], [ 8, 6], + ], + [ + # Row 2 + [12, 0], [12, 2], [10, 0], [ 9, 0], [10, 2], [11, 0], [ ], + [ ], [11, 2], [10, 4], [ 9, 2], [10, 6], [12, 4], [12, 6], + ], + [ + # Row 3 + [17, 0], [17, 2], [15, 0], [14, 0], [15, 2], [16, 0], [13, 0], + [13, 2], [16, 2], [15, 4], [14, 2], [15, 6], [17, 4], [17, 6], + ], + [ + # Row 4 + [20, 0], [20, 2], [19, 0], [18, 0], [19, 2], [], [], [], [], + [19, 4], [18, 2], [19, 6], [20, 4], [20, 6], + ], + [ + # Row 5 + [ ], [23, 0], [22, 2], [22, 0], [22, 4], [21, 0], [21, 2], + [24, 0], [24, 2], [25, 0], [25, 4], [25, 2], [26, 0], [ ], + ], + ] + + def set_attr_at(self, block, n, attr, fn, val): + blk = self.heatmap[block][n] + if attr in blk: + blk[attr] = fn(blk[attr], val) + else: + blk[attr] = fn(None, val) + + def coord(self, col, row): + return self.coords[row][col] + + @staticmethod + def set_attr(orig, new): + return new + + def set_bg(self, (block, n), color): + self.set_attr_at(block, n, "c", self.set_attr, color) + #self.set_attr_at(block, n, "g", self.set_attr, False) + + def set_tap_info(self, (block, n), count, cap): + def _set_tap_info(o, _count, _cap): + ns = 4 - o.count ("\n") + return o + "\n" * ns + "%.02f%%" % (float(_count) / float(_cap) * 100) + + if not cap: + cap = 1 + self.heatmap[block][n + 1] = _set_tap_info (self.heatmap[block][n + 1], count, cap) + + @staticmethod + def heatmap_color (v): + colors = [ [0.3, 0.3, 1], [0.3, 1, 0.3], [1, 1, 0.3], [1, 0.3, 0.3]] + fb = 0 + if v <= 0: + idx1, idx2 = 0, 0 + elif v >= 1: + idx1, idx2 = len(colors) - 1, len(colors) - 1 + else: + val = v * (len(colors) - 1) + idx1 = int(floor(val)) + idx2 = idx1 + 1 + fb = val - float(idx1) + + r = (colors[idx2][0] - colors[idx1][0]) * fb + colors[idx1][0] + g = (colors[idx2][1] - colors[idx1][1]) * fb + colors[idx1][1] + b = (colors[idx2][2] - colors[idx1][2]) * fb + colors[idx1][2] + + r, g, b = [x * 255 for x in r, g, b] + return "#%02x%02x%02x" % (r, g, b) + + def __init__(self, layout): + self.log = {} + self.total = 0 + self.max_cnt = 0 + self.layout = layout + + def update_log(self, (c, r)): + if not (c, r) in self.log: + self.log[(c, r)] = 0 + self.log[(c, r)] = self.log[(c, r)] + 1 + self.total = self.total + 1 + if self.max_cnt < self.log[(c, r)]: + self.max_cnt = self.log[(c, r)] + + def get_heatmap(self): + with open("%s/heatmap-layout.%s.json" % (dirname(sys.argv[0]), self.layout), "r") as f: + self.heatmap = json.load (f) + + ## Reset colors + for row in self.coords: + for coord in row: + if coord != []: + self.set_bg (coord, "#d9dae0") + + for (c, r) in self.log: + coords = self.coord(c, r) + b, n = coords + cap = self.max_cnt + if cap == 0: + cap = 1 + v = float(self.log[(c, r)]) / cap + self.set_bg (coords, self.heatmap_color (v)) + self.set_tap_info (coords, self.log[(c, r)], self.total) + return self.heatmap + + def get_stats(self): + usage = [ + # left hand + [0, 0, 0, 0, 0], + # right hand + [0, 0, 0, 0, 0] + ] + finger_map = [0, 0, 1, 2, 3, 4, 4] + for (c, r) in self.log: + if r == 5: # thumb cluster + if c <= 6: # left side + usage[0][4] = usage[0][4] + self.log[(c, r)] + else: + usage[1][4] = usage[1][4] + self.log[(c, r)] + else: + fc = c + hand = 0 + if fc >= 7: + fc = fc - 7 + hand = 1 + fm = finger_map[fc] + usage[hand][fm] = usage[hand][fm] + self.log[(c, r)] + hand_usage = [0, 0] + for f in usage[0]: + hand_usage[0] = hand_usage[0] + f + for f in usage[1]: + hand_usage[1] = hand_usage[1] + f + + total = self.total + if total == 0: + total = 1 + stats = { + "hands": { + "left": { + "usage": float(hand_usage[0]) / total * 100, + "fingers": { + "0 - pinky": 0, + "1 - ring": 0, + "2 - middle": 0, + "3 - index": 0, + "4 - thumb": 0, + } + }, + "right": { + "usage": float(hand_usage[1]) / total * 100, + "fingers": { + "0 - thumb": 0, + "1 - index": 0, + "2 - middle": 0, + "3 - ring": 0, + "4 - pinky": 0, + } + }, + } + } + + hmap = ['left', 'right'] + fmap = ['0 - pinky', '1 - ring', '2 - middle', '3 - index', '4 - thumb', + '0 - thumb', '1 - index', '2 - middle', '3 - ring', '4 - pinky'] + for hand_idx in range(len(usage)): + hand = usage[hand_idx] + for finger_idx in range(len(hand)): + stats['hands'][hmap[hand_idx]]['fingers'][fmap[finger_idx + hand_idx * 5]] = float(hand[finger_idx]) / total * 100 + return stats + +def dump_all(out_dir, heatmaps): + for layer in heatmaps.keys(): + if len(heatmaps[layer].log) == 0: + continue -cr_coord_map = [ - [ - # Row 0 - [ 4, 0], [ 4, 2], [ 2, 0], [ 1, 0], [ 2, 2], [ 3, 0], [ 3, 2], - [ 3, 4], [ 3, 6], [ 2, 4], [ 1, 2], [ 2, 6], [ 4, 4], [ 4, 6], - ], - [ - # Row 1 - [ 8, 0], [ 8, 2], [ 6, 0], [ 5, 0], [ 6, 2], [ 7, 0], [ 7, 2], - [ 7, 4], [ 7, 6], [ 6, 4], [ 5, 2], [ 6, 6], [ 8, 4], [ 8, 6], - ], - [ - # Row 2 - [12, 0], [12, 2], [10, 0], [ 9, 0], [10, 2], [11, 0], [ ], - [ ], [11, 2], [10, 4], [ 9, 2], [10, 6], [12, 4], [12, 6], - ], - [ - # Row 3 - [17, 0], [17, 2], [15, 0], [14, 0], [15, 2], [16, 0], [13, 0], - [13, 2], [16, 2], [15, 4], [14, 2], [15, 6], [17, 4], [17, 6], - ], - [ - # Row 4 - [20, 0], [20, 2], [19, 0], [18, 0], [19, 2], [], [], [], [], - [19, 4], [18, 2], [19, 6], [20, 4], [20, 6], - ], - [ - # Row 5 - [ ], [23, 0], [22, 2], [22, 0], [22, 4], [21, 0], [21, 2], - [24, 0], [24, 2], [25, 0], [25, 4], [25, 2], [26, 0], [ ], - ], -] - -def set_attr_at(j, b, n, attr, fn, val): - blk = j[b][n] - if attr in blk: - blk[attr] = fn(blk[attr], val) - else: - blk[attr] = fn(None, val) - -def coord(col, row): - return cr_coord_map[row][col] - -def set_attr(orig, new): - return new - -def set_bg(j, (b, n), color): - set_attr_at(j, b, n, "c", set_attr, color) - #set_attr_at(j, b, n, "g", set_attr, False) - -def _set_tap_info(o, count, cap): - ns = 4 - o.count ("\n") - return o + "\n" * ns + "%.02f%%" % (float(count) / float(cap) * 100) - -def set_tap_info(j, (b, n), count, cap): - j[b][n + 1] = _set_tap_info (j[b][n + 1], count, cap) - -def heatmap_color (v): - colors = [ [0.3, 0.3, 1], [0.3, 1, 0.3], [1, 1, 0.3], [1, 0.3, 0.3]] - fb = 0 - if v <= 0: - idx1, idx2 = 0, 0 - elif v >= 1: - idx1, idx2 = len(colors) - 1, len(colors) - 1 - else: - val = v * (len(colors) - 1) - idx1 = int(floor(val)) - idx2 = idx1 + 1 - fb = val - float(idx1) - - r = (colors[idx2][0] - colors[idx1][0]) * fb + colors[idx1][0] - g = (colors[idx2][1] - colors[idx1][1]) * fb + colors[idx1][1] - b = (colors[idx2][2] - colors[idx1][2]) * fb + colors[idx1][2] - - r, g, b = [x * 255 for x in r, g, b] - return "#%02x%02x%02x" % (r, g, b) - -# Load the keylog -def load_keylog(fname, restrict_row): - keylog = {} - total = 0 - with open(fname, "r") as f: - lines = f.readlines() - for line in lines: - m = re.search ('KL: col=(\d+), row=(\d+)', line) + with open ("%s/%s.json" % (out_dir, layer), "w") as f: + json.dump(heatmaps[layer].get_heatmap(), f) + print >>sys.stderr, "%s stats:" % (layer) + json.dump (heatmaps[layer].get_stats(), sys.stderr, + indent = 4, sort_keys = True) + print >>sys.stderr, "" + print >>sys.stderr, "" + +def main(opts): + + heatmaps = {"Dvorak": Heatmap("Dvorak"), + "ADORE": Heatmap("ADORE") + } + cnt = 0 + restrict_row = opts.restrict_row + out_dir = opts.outdir + + while True: + line = sys.stdin.readline() + if not line: + break + m = re.search ('KL: col=(\d+), row=(\d+), pressed=(\d+), layer=(.*)', line) if not m: continue - (c, r) = (int(m.group (2)), int(m.group (1))) - if restrict_row != None and r != int(restrict_row): + + cnt = cnt + 1 + (c, r, l) = (int(m.group (2)), int(m.group (1)), m.group (4)) + if restrict_row != -1 and r != restrict_row: + continue + if c in opts.ignore_columns: continue - if (c, r) in keylog: - keylog[(c, r)] = keylog[(c, r)] + 1 - else: - keylog[(c, r)] = 1 - total = total + 1 - return total / 2, keylog - -def l_flat(s): - f = s.split("\n") - return ", ".join (f) - -def main(base_fn, log_fn, restrict_row = None): - - with open(base_fn, "r") as f: - layout = json.load (f) - - ## Reset colors - for row in cr_coord_map: - for col in row: - if col != []: - set_bg (layout, col, "#d9dae0") - #set_attr_at (layout, col[0], col[1], "g", set_attr, True) - - total, log = load_keylog (log_fn, restrict_row) - max_cnt = 0 - for (c, r) in log: - max_cnt = max(max_cnt, log[(c, r)]) - - # Create the heatmap - for (c, r) in log: - coords = coord(c, r) - b, n = coords - cap = max_cnt - v = float(log[(c, r)]) / cap - print >> sys.stderr, "%s => %d/%d => %f = %s" % (l_flat(layout[b][n+1]), log[(c,r)], cap, v, heatmap_color(v)) - set_bg (layout, coord(c, r), heatmap_color (v)) - set_tap_info (layout, coord (c, r), log[(c, r)], total) - - print json.dumps(layout) -if __name__ == "__main__": - if len(sys.argv) < 3: - print """Log to Heatmap -- creates a heatmap out of keyboard logs + heatmaps[l].update_log ((c, r)) + + if opts.dump_interval != -1 and cnt >= opts.dump_interval: + cnt = 0 + dump_all(out_dir, heatmaps) -Usage: log-to-heatmap.py base-layout.json logfile [row] >layout.json""" - sys.exit (1) - main(*sys.argv[1:]) + dump_all (out_dir, heatmaps) + +if __name__ == "__main__": + parser = argparse.ArgumentParser (description = "keylog to heatmap processor") + parser.add_argument ('outdir', action = 'store', + help = 'Output directory') + parser.add_argument ('--row', dest = 'restrict_row', action = 'store', type = int, + default = -1, help = 'Restrict processing to this row only') + parser.add_argument ('--dump-interval', dest = 'dump_interval', action = 'store', type = int, + default = 100, help = 'Dump stats and heatmap at every Nth event, -1 for dumping at EOF only') + parser.add_argument ('--ignore-column', dest = 'ignore_columns', action = 'append', type = int, + default = [], help = 'Ignore the specified columns') + args = parser.parse_args() + main(args) diff --git a/keyboards/ergodox/keymaps/bepo_csa/keymap.c b/keyboards/ergodox/keymaps/bepo_csa/keymap.c new file mode 100644 index 0000000000..495242adb3 --- /dev/null +++ b/keyboards/ergodox/keymaps/bepo_csa/keymap.c @@ -0,0 +1,527 @@ +/* TypeMatrix-2030-like keymap */ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "action_util.h" +#include "led.h" +#include "keymap_extras/keymap_bepo.h" +#include "keymap_extras/keymap_canadian_multilingual.h" + +enum layers { + LR_BASE, // default layer + LR_CSA, // BÉPO over Canadian Multilingual (CSA) + LR_CSA_SFT, // shifted BÉPO over CSA + LR_CSA_AGR, // altgr-ed BÉPO over CSA + LR_CSA_AGR_SFT, // altgr-shifted BÉPO over CSA + LR_NUMR, // numeric layer + LR_FN, // fn layer +}; + +#define IS_CA_MULT_ENABLED() (layer_state & (1 << LR_CSA)) + +enum macros { + // Characters that do not exist in CSA and must be implemented based on unicode support + // Note: these are intentionally declared first to be used as indexes in spec_chars below + UC_NDSH, // – + UC_MDSH, // — + UC_ELPS, // … + END_UC, // indicates the last unicode character macro + // other macros + M_CSA_SFT, // toggle shift on CSA + M_CSA_AGR_SFT, // toggle shift on LR_CSA_AGR (goes to LR_CSA_AGR_SFT) + M_CSA_SFT_AGR, // toggle AltGr on LR_CSA_SFT (goes to LR_CSA_AGR_SFT) + // macros for characters that need to be un-shifted in LR_CA_MULT_SHIFT + M_1, + M_2, + M_3, + M_4, + M_5, + M_6, + M_7, + M_8, + M_9, + M_0, + M_DEGR, + M_SCLN, + M_GRV, + M_NBSP, + // macros for characters that don't have a simple key combination in LR_CA_MULT_ALTGR + M_CRC, + // other layer macros + M_DBL0, // double 0 + M_FNLR, // fn layer + M_NMAL, // num+alt +}; + +#define CSA(name) M(M_CSA_##name) // calls a CSA macro + +const uint16_t unicode_chars[] = { + [UC_NDSH] = L'–', + [UC_MDSH] = L'—', + [UC_ELPS] = L'…', +}; + +/* shortcut for unicode character macros */ +#define MUC(name) M(UC_##name) // calls a unicode macro + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | $ | " | « | » | ( | ) | Del | | Del | @ | + | - | / | * | W | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | B | É | P | O | È |Backsp| |Backsp| ^ | V | D | L | J | Z | + * |--------+------+------+------+------+------|ace | |ace |------+------+------+------+------+--------| + * | = | A | U | I | E | , |------| |------| C | T | S | R | N | M | + * |--------+------+------+------+------+------|Enter | |Enter |------+------+------+------+------+--------| + * | LShift | À | Y | X | . | K | | | | ' | Q | G | H | F | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |LCtrl | fn | LGui |numAlt| LAlt | |Alt Gr| % | App | Ç | RCtrl| + * `----------------------------------' `----------------------------------' + * ,--------------. ,-------------. + * | Esc | num | | Left |Right | + * ,------+-------+------| |------+------+------. + * | | | PgUp | | Up | | | + * |Space | Home |------| |------| End |Space | + * | | | PgDn | | Down | | | + * `---------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[LR_BASE] = KEYMAP( // layer 0 : default + // left hand + BP_DLR, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DELT, + KC_TAB, BP_B, BP_ECUT, BP_P, BP_O, BP_EGRV, KC_BSPC, + BP_EQL, BP_A, BP_U, BP_I, BP_E, BP_COMM, + KC_LSFT, BP_AGRV, BP_Y, BP_X, BP_DOT, BP_K, KC_ENT, + KC_LCTL, M(M_FNLR), KC_LGUI, M(M_NMAL), KC_LALT, + + KC_ESC, TG(LR_NUMR), + KC_PGUP, + KC_SPC, KC_HOME, KC_PGDN, + + // right hand + KC_DELT, KC_6, KC_7, KC_8, KC_9, KC_0, BP_W, + KC_BSPC, BP_DCRC, BP_V, BP_D, BP_L, BP_J, BP_Z, + BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, + KC_ENT, BP_APOS, BP_Q, BP_G, BP_H, BP_F, KC_RSFT, + BP_ALGR, BP_PERC, KC_APP, BP_CCED, KC_RCTL, + + KC_LEFT, KC_RGHT, + KC_UP, + KC_DOWN, KC_END, KC_SPC + ), +/** + * Same as default but for use with Canadian Multilingual on OS side + */ +[LR_CSA] = KEYMAP( + // left hand + KC_DLR, CSA_DQOT, CSA_LGIL, CSA_RGIL, KC_LPRN, KC_RPRN, KC_TRNS, + KC_TRNS, KC_B, CSA_ECUT, KC_P, KC_O, CSA_EGRV, KC_TRNS, + KC_EQL, KC_A, KC_U, KC_I, KC_E, KC_COMM, + CSA(SFT), CSA_AGRV, KC_Y, KC_X, KC_DOT, KC_K, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + + // right hand + KC_TRNS, KC_AT, KC_PLUS, KC_MINS, CSA_SLSH, KC_ASTR, KC_W, + KC_TRNS, CSA_DCRC, KC_V, KC_D, KC_L, KC_J, KC_Z, + KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, + KC_TRNS, CSA_APOS, KC_Q, KC_G, KC_H, KC_F, CSA(SFT), + MO(LR_CSA_AGR), KC_PERC, KC_TRNS, CSA_CCED, KC_LCTL, // RCTL has a special behaviour in CSA so use LCTL + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), +/* Shifted BÉPO over Canadian Multilingual + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | # | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | ! | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ° | | | | | ; |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | : | | | | | ? | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | ` | | | | + * `----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[LR_CSA_SFT] = KEYMAP( + // left hand + KC_HASH, M(M_1), M(M_2), M(M_3), M(M_4), M(M_5), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + M(M_DEGR),KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(M_SCLN), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_COLN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + M(M_NBSP), KC_TRNS, KC_TRNS, + + // right hand + KC_TRNS, M(M_6), M(M_7), M(M_8), M(M_9), M(M_0), KC_TRNS, + KC_TRNS, KC_EXLM, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, CSA_QEST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + CSA(SFT_AGR), M(M_GRV), KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, M(M_NBSP) + ), +/* AltGr-ed BÉPO over Canadian Multilingual + * "////" indicates that the key is disabled (unsupported bépo character) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | – | — | < | > | [ | ] | | | | ^ | ± | //// | ÷ | × | dead ˘ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | |dead '| & | Å“ |dead `| | | | ¡ |dead ˇ| ð | //// | ij | ////// | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ////// | æ | ù |dead "| € | ̛’ |------| |------| © | þ | ß | ® |dead ~| dead ¯ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | \ | { | } | … | ~ | | | | ¿ |dead °| μ | //// |dead Ë›| | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | //// | |dead ¸| | + * `----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | _ | |------| |------| | _ | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[LR_CSA_AGR] = KEYMAP( + // left hand + MUC(NDSH), MUC(MDSH), CSA_LESS, CSA_GRTR, CSA_LBRC, CSA_RBRC, KC_TRNS, + KC_TRNS, CSA_PIPE, CSA_DACT, KC_AMPR, CSA_OE, CSA_DGRV, KC_TRNS, + KC_NO, CSA_AE, CSA_UGRV, CSA_DTRM, CSA_EURO, CSA_RQOT, + CSA(AGR_SFT), CSA_BSLS, CSA_LCBR, CSA_RCBR, MUC(ELPS), CSA_TILD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_UNDS, CSA(AGR_SFT), KC_TRNS, + + // right hand + KC_TRNS, M(M_CRC), CSA_PSMS, KC_NO, CSA_DVSN, CSA_TIMS, CSA_DBRV, + KC_TRNS, CSA_IXLM, CSA_DCAR, CSA_ETH, KC_NO, CSA_IJ, KC_NO, + CSA_CPRT, CSA_THRN, CSA_SRPS, CSA_RTM, CSA_DTLD, CSA_DMCR, + KC_TRNS, CSA_IQST, CSA_DRNG, CSA_MU, KC_NO, CSA_DOGO, CSA(AGR_SFT), + KC_TRNS, KC_NO, KC_TRNS, CSA_DCED, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, CSA(AGR_SFT), KC_UNDS + ), +/* AltGr-shifted BÉPO over Canadian Multilingual + * "////" indicates that the key is disabled (unsupported bépo character or unused in bépo) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ¶ | //// | “ | †| //// | //// | | | | //// | ¬ | ¼ | ½ | ¾ | ////// | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ¦ | Ë | § | Å’ | ` | | | | //// | //// | à | //// | IJ | ////// | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ////// | Æ | Ù |dead-Ë™| //// | //// |------| |------| //// | Þ | ẞ | â„¢ | //// | º | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | //// | ‘ | ’ | //// | //// | | | | //// | //// | //// | //// | ª | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[LR_CSA_AGR_SFT] = KEYMAP( + // left hand + CSA_PARG, KC_NO, CSA_LDQT, CSA_RDQT, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, CSA_BPIP, CSA_DDCT, CSA_SECT, S(CSA_OE), M(M_GRV), KC_TRNS, + KC_NO, S(CSA_AE), S(CSA_UGRV), CSA_DDTA, KC_NO, KC_NO, + CSA(AGR_SFT), KC_NO, CSA_LQOT, CSA_RQOT, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, CSA(AGR_SFT), KC_TRNS, + + // right hand + KC_TRNS, KC_NO, CSA_NEGT, CSA_1QRT, CSA_1HLF, CSA_3QRT, KC_NO, + KC_TRNS, KC_NO, KC_NO, S(CSA_ETH), KC_NO, S(CSA_IJ), KC_NO, + KC_NO, S(CSA_THRN), S(CSA_SRPS), CSA_TM, KC_NO, CSA_ORDO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, CSA_ORDA, CSA(AGR_SFT), + CSA(SFT_AGR), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, CSA(AGR_SFT), KC_TRNS + ), +/* Numeric Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | | | Tab | / | * | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | F6 | F7 | F8 | F9 | F10 | | | | | Home | 7 | 8 | 9 | + | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | F11 | F12 | | | |------| |------| Up | End | 4 | 5 | 6 | + | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | Left | Down | Right| 1 | 2 | 3 |KpEnter | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | 0 | 00 | . |Etr/Ctl| + * `----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | | | |n.lock|c.lock| + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[LR_NUMR] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS, + + // right hand + KC_TRNS, KC_F6, KC_F7, KC_TAB, KC_PSLS, KC_PAST, KC_PMNS, + KC_TRNS, KC_TRNS, KC_HOME, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_UP, KC_END, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LEFT, KC_DOWN, KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_TRNS, KC_P0, M(M_DBL0),KC_PDOT, CTL_T(KC_PENT), + + KC_NLCK, KC_CAPS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* fn layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |~CA-mult| | | | | |Insert| |Insert|Eject |Power |Sleep | Wake |PrtScr|ScrollLk| + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | |VolUp | | | | | | | | Pause | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | RESET | | | Calc | Mail |Browsr|------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | App | cut | copy |paste | Mute |VolDn | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | Next | | | | | + * | Mute | play |------| |------| | | + * | | | Prev | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[LR_FN] = KEYMAP( + TG(LR_CSA), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + RESET, KC_TRNS, KC_TRNS, KC_CALC, KC_MAIL, KC_WHOM, + KC_TRNS, KC_APP, S(KC_DELT), LCTL(KC_INS),S(KC_INS), KC_MUTE, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_MPRV, + KC_MUTE, KC_MPLY, KC_MNXT, + + // right hand + KC_INS, KC_EJCT, KC_PWR, KC_SLEP, KC_WAKE, KC_PSCR, KC_SLCK, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +void hold_shift(void) { + register_code(KC_LSHIFT); +} + +void release_shift(void) { + unregister_code(KC_LSHIFT); +} + +uint16_t hextokeycode(int hex) { + if (hex == 0x0) { + return KC_P0; + } else if (hex < 0xA) { + return KC_P1 + (hex - 0x1); + } else { + return KC_A + (hex - 0xA); + } +} + +void send_unicode(uint16_t unicode) +{ + // For more info on how this works per OS, see here: https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input + // Implemented for Windows: + // Pressing ALT followed by + followed by the unicode code point in hex. + // Requires registry key HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad set to String 1 + register_code(KC_LALT); + register_code(KC_PPLS); + unregister_code(KC_PPLS); + + for (int i = 12; i >= 0; i -= 4) { + register_code(hextokeycode((unicode >> i) & 0xF)); + unregister_code(hextokeycode((unicode >> i) & 0xF)); + } + + unregister_code(KC_LALT); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0 ... END_UC: + if (record->event.pressed) { + send_unicode(unicode_chars[id]); + } + break; + case M_CSA_SFT: + // BÉPO over CSA: toggle shift layer + layer_invert(LR_CSA_SFT); + if (record->event.pressed) { + hold_shift(); + } else { + release_shift(); + } + break; + case M_CSA_SFT_AGR: + // BÉPO over CSA: from shift layer, momentary altgr+shift layer + layer_invert(LR_CSA_AGR); + layer_invert(LR_CSA_AGR_SFT); + if (record->event.pressed) { + // shift not needed for LR_CSA_AGR_SFT + release_shift(); + } else { + // back to shift layer + hold_shift(); + } + break; + case M_CSA_AGR_SFT: + // BÉPO over CSA: from altgr layer, momentary altgr+shift layer + layer_invert(LR_CSA_SFT); + layer_invert(LR_CSA_AGR_SFT); + break; + case M_1 ... M_0: + case M_DEGR: + case M_SCLN: + case M_GRV: + case M_NBSP: + // macros of the shift layer that require to release shift + if (record->event.pressed) { + release_shift(); + switch (id) { + case M_1 ... M_0: + register_code(KC_1 + (id - M_1)); + break; + case M_DEGR: + return MACRO(DOWN(CSA_ALTGR), D(SCLN), END); + case M_SCLN: + return MACRO(D(SCLN), END); + case M_GRV: + return MACRO(I(75), DOWN(CSA_ALTGR), TYPE(CSA_DCRC), UP(CSA_ALTGR), T(SPACE), END); + case M_NBSP: + // use weak mod such that pressing another key will not be affected + add_weak_mods(MOD_BIT(CSA_ALTGR)); + return MACRO(D(SPACE), END); + } + } else { + hold_shift(); + switch (id) { + case M_1 ... M_0: + unregister_code(KC_1 + (id - M_1)); + break; + case M_DEGR: + return MACRO(UP(CSA_ALTGR), U(SCLN), END); + case M_SCLN: + return MACRO(U(SCLN), END); + case M_NBSP: + del_weak_mods(MOD_BIT(CSA_ALTGR)); + return MACRO(U(SPACE), END); + } + } + break; + case M_CRC: + if (record->event.pressed) { + return MACRO(I(75), TYPE(CSA_DCRC), T(SPACE), END); + } + break; + case M_DBL0: + if (record->event.pressed) { + return MACRO( I(25), T(P0), T(P0), END ); + } + break; + case M_FNLR: + layer_invert(LR_NUMR); + layer_invert(LR_FN); + break; + case M_NMAL: + layer_invert(LR_NUMR); + if (record->event.pressed) { + register_code(KC_LALT); + } else { + unregister_code(KC_LALT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + // led 1: numeric layer + if (layer_state & (1 << LR_NUMR)) { + ergodox_right_led_1_on(); + } + // led 2: BÉPO over Canadian Multilingual + if (IS_CA_MULT_ENABLED()) { + ergodox_right_led_2_on(); + } + // led 3: caps lock + if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { + ergodox_right_led_3_on(); + } +}; diff --git a/keyboards/ergodox/keymaps/bepo_csa/readme.md b/keyboards/ergodox/keymaps/bepo_csa/readme.md new file mode 100644 index 0000000000..d4975b2265 --- /dev/null +++ b/keyboards/ergodox/keymaps/bepo_csa/readme.md @@ -0,0 +1,162 @@ +# BÉPO Keymap with firmware-remapping for software CSA layout + +This is a keymap intended to be used with the [BÉPO layout](http://bepo.fr), a French ergonomic layout designed by following Dvorak's principles. + +The particularity of this keymap is that it supports using the [Canadian Multilingual Standard layout](https://en.wikipedia.org/wiki/QWERTY#Canadian_Multilingual_Standard) (also known as _ACNOR keyboard_ or _CSA keyboard_, see also the [French page](https://fr.wikipedia.org/wiki/QWERTY#Clavier_canadien_multilingue_standard) which contains more details) on the OS side, by enabling the _CSA_ layer. This is especially useful for operating systems that natively provide CSA, but not BÉPO, like Windows. The CSA layout was chosen because it is probably the standard layout that provides the best character set coverage. + +This keymap is based on the [tm2030](../tm2030/) keymap, whose goal was to have a [TypeMatrixâ„¢ 2030](http://typematrix.com/2030/features.php) inspired layout for the ErgoDox EZ. + +As this keyboard is intended for French people, the rest of this page will be in French. + +# Keymap BÉPO avec support en firmware pour utilisation avec la disposition CSA en software + +Cette keymap a été conçue pour être utilisée avec la [disposition BÉPO](http://bepo.fr), la disposition francophone, ergonomique et libre basée sure les principes de Dvorak. + +La particularité de cette keymap est qu'elle supporte l'utilisation du [clavier canadien multilingue standard](https://fr.wikipedia.org/wiki/QWERTY#Clavier_canadien_multilingue_standard) (aussi appelé _clavier ACNOR_ ou _clavier CSA_) du côté du système d'exploitation, en activant la couche _CSA_. Ceci s'avère particulièrement utile pour les systèmes d'exploitations qui fournissent nativement le CSA, mais pas le BÉPO, comme Windows. Le clavier CSA a été choisi comme base car c'est probablement la disposition standard qui fournit la meilleure couverture en termes de caractères disponibles. + +Cette keymap est basée sur la keymap [tm2030](../tm2030/), dont le but est de fournir une disposition inspirée du [TypeMatrixâ„¢ 2030](http://typematrix.com/2030/features.php) pour l'ErgoDox EZ. + +## Couche de base +C'est la couche par défaut, proche du TypeMatrix, avec les différences suivantes: +- La ligne du haut (les touches `F`) et la colonne de droite sont retirées, les touches correspondantes étant déplacées ailleurs. +- Les touches situés en bas à gauche sont redisposées dans cet ordre: `Ctrl`, `fn`, `Gui`, `num+Alt`, `Alt` +- Les touches `shuffle` (`Alt+Tab`) et `desktop` ne sont pas supportés +- `W` est déplacé à la place de `=` +- `=` est déplacé sous `Tab` (au lieu d'avoir un grand `Shift`) +- `%` et `Ç` sont déplacés à la place de `Home` et `End` respectivement +- Les flèches ainsi que `PgUp`/`PgDown`/`Home`/`End` sont déplacées sur les pouces + +À noter que pour `W` et `Ç`, le but a été de ne pas les déplacer trop par rapport à la disposition BÉPO _standard_, afin de pouvoir repasser facilement sur un TypeMatrix ou un clavier traditionnel. + + +``` +,--------------------------------------------------. ,--------------------------------------------------. +| $ | " | « | » | ( | ) | Del | | Del | @ | + | - | / | * | W | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Tab | B | É | P | O | È |Backsp| |Backsp| ^ | V | D | L | J | Z | +|--------+------+------+------+------+------|ace | |ace |------+------+------+------+------+--------| +| = | A | U | I | E | , |------| |------| C | T | S | R | N | M | +|--------+------+------+------+------+------|Enter | |Enter |------+------+------+------+------+--------| +| LShift | À | Y | X | . | K | | | | ' | Q | G | H | F | RShift | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + |LCtrl | fn | LGui |numAlt| LAlt | |Alt Gr| % | App | Ç | RCtrl| + `----------------------------------' `----------------------------------' + ,--------------. ,-------------. + | Esc | num | | Left |Right | + ,------+-------+------| |------+------+------. + | | | PgUp | | Up | | | + |Space | Home |------| |------| End |Space | + | | | PgDn | | Down | | | + `---------------------' `--------------------' +``` + +### Changer de couche + +- Utilisez `num` pour activer/désactiver [la couche numérique](#couche-numérique) +- Maintenez `fn` pour activer temporairement [les couches numériques et Fn](#couche-fn) +- Maintenez `numAlt` pour activer temporairement la couche numérique combinée avec `Alt` (facilite l'utilisation des raccourcis tels que `Alt`+`F4`) + +### Diodes +Les diodes de l'ErgoDox EZ (côté droit) sont utilisées de la façon suivante : + +- diode de gauche (rouge) : indique l'activation de [la couche numérique](#couche-numérique) +- diode du milieu (verte) : indique l'activation du [mode CSA](#couche-csa) +- diode de droite (bleue) : indique le verrouillage majuscules + +## Couche CSA +La couche _CSA_ est la même que la couche de base, pour une utilisation avec un clavier Canadien Multilingue configuré dans le système d'exploitation. + +Pour l'activer, appuyez sur `fn`+`$`. La [diode](#diodes) verte indique que la couche CSA est activée. + +### Limitations +Seuls les caractères présents dans le clavier CSA sont parfaitement supportés. De manière générale, il s'agit des caractères suivants : + +- toute la couche de base +- tous les caractères accessibles en `Shift` +- tous les caractères de la main gauche accessibles en `AltGr` à l'exception du `≠` +- environ la moitié des caractères de la main droite accessibles en `AltGr` et la moitié des caractères accessibles en `AltGr`+`Shift` (consultez [le fichier source](keymap.c) pour voir les caractères supportés) + +En particulier, les caractères suivants sont émulés via le support Unicode (Windows seulement): + +- le tiret cadratin (tiret long) : — +- le tiret demi-cadratin (demi tiret) : – +- les points de suspension : … + +L'implémentation actuelle ne fonctionne pas dans toutes les applications, en particulier les applications MS Office. + +Il est probable que l'utilisation de la couche CSA ne fonctionne pas correctement dans certains jeux vidéos. + +Cette fonctionnalité a été conçue et testée essentiellment pour Windows (7). + +### Détails techniques +Techniquement, la couche CSA est en réalité composée de 4 couches servant à émuler la couche de base, les appuis sur `Shift` ou `Alt` et la combinaison des deux. + +Le changement de couches se fait par des macros afin d'activer ou désactiver plusieurs couches et la touche `Shift` en même temps. + +Certains caractères sont également implémentés par des macros, notamment ceux de la couche `Shift` qui n'ont pas besoin de cette touche en CSA, comme les chiffres. + +Les caractères Unicode se basent sur une implémentation spécifique et non celle fournie dans QMK — il faudrait sans doute migrer le code. Notez la façon dont ces caractères sont déclarés tels quels dans [le code source](keymap.c) (tableau `unicode_char`). + +## Couche numérique +Couche numérique proche du TM lorsqu'on active `num`, avec les différences suivantes : + +- Le clavier numérique est déplacés de 1 vers le haut et vers la droite. +- Les flèches sont décalées de 1 vers la gauche. +- Fournit l'accès aux touches `F1` à `F12`, `caps-lock` et `num-lock`. + +La couche numérique est indiquée par la [diode](#diodes) de gauche (rouge). Caps-lock est indiqué par la diode de droite (bleue). + +La touche `numAlt` de [la couche de base](#couche-de-base) permet d'activer la couche numérique et la touche `Alt` simultanément, afin de faciliter les raccourcis claviers comme `Alt`+`F4`. + +``` +,--------------------------------------------------. ,--------------------------------------------------. +| | F1 | F2 | F3 | F4 | F5 | | | | | | Tab | / | * | - | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| | F6 | F7 | F8 | F9 | F10 | | | | | Home | 7 | 8 | 9 | + | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | F11 | F12 | | | |------| |------| Up | End | 4 | 5 | 6 | + | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | | | | | | | | Left | Down | Right| 1 | 2 | 3 |KpEnter | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | | 0 | 00 | . |Etr/Ctl| + `----------------------------------' `-----------------------------------' + ,-------------. ,-------------. + | | | |n.lock|c.lock| + ,------|------|------| |------+------+------. + | | | | | | | | + | | |------| |------| | | + | | | | | | | | + `--------------------' `--------------------' +``` + +## Couche Fn +Activée simultanément avec la couche numérique lorsque l'on maintient la touche `fn`. Comme sur le TM, elle fournit l'accès aux fonctionnalités suivantes : + +- `couper`, `copier` et `coller` — attention: ne pas utiliser dans l'explorateur de fichiers. +- monter/baisser/couper le volume — seulement accessible en main gauche, contrairement au TM. +- piste précédente/suivante +- calculatrice, e-mail et page d'accueil du navigateur web +- `insert`, `power`, `sleep`, `wake`, `print screen`, `scroll-lock` et `pause` +- ~CSA: (dés)activation de [la couche CSA](#couche-csa) sur `$` +- RESET: rechargement du firmware avec Teensy-Loader (pour les développeurs) + +``` +,--------------------------------------------------. ,--------------------------------------------------. +| ~CSA | | | | | |Insert| |Insert|Eject |Power |Sleep | Wake |PrtScr|ScrollLk| +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| | | | | | |VolUp | | | | | | | | Pause | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| RESET | | | Calc | Mail |Browsr|------| |------| | | | | | | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | App | cut | copy |paste | Mute |VolDn | | | | | | | | | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | | | | | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | Next | | | | | + | Mute | play |------| |------| | | + | | | Prev | | | | | + `--------------------' `--------------------' +```
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/coderkun_neo2/Makefile b/keyboards/ergodox/keymaps/coderkun_neo2/Makefile index 6c0a79b110..b0fe90ab1d 100644 --- a/keyboards/ergodox/keymaps/coderkun_neo2/Makefile +++ b/keyboards/ergodox/keymaps/coderkun_neo2/Makefile @@ -1,2 +1,3 @@ SLEEP_LED_ENABLE = no UNICODE_ENABLE = yes +COMMAND_ENABLE = no diff --git a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c index 2ac06eef85..0eedecf3dd 100644 --- a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c +++ b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c @@ -1,5 +1,4 @@ #include "ergodox.h" -#include "debug.h" #include "action_layer.h" #include "led.h" #include "keymap_extras/keymap_neo2.h" @@ -138,11 +137,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ┌───────┬─────┬─────┬─────┬─────┬─────┬─────┠┌─────┬─────┬─────┬─────┬─────┬─────┬───────┠* │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ * ├───────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼───────┤ - * │ │ │ │ │ ✕ │ │ │ │ │ │ F9 │ F10 │ F11 │ F12 │ │ + * │ │ ┌ │ ┬ │ ┠│ ─ │ │ │ │ │ │ │ F9 │ F10 │ F11 │ F12 │ │ * ├───────┼─────┼─────┼─────╆─────╅─────┤ │ │ ├─────╆─────╅─────┼─────┼─────┼───────┤ - * │ │ │ │ │ ✓ │ ├─────┤ ├─────┤ │ F5 │ F6 │ F7 │ F8 │ │ + * │ │ ├ │ ┼ │ ┤ │ ✓ │ ✕ ├─────┤ ├─────┤ │ F5 │ F6 │ F7 │ F8 │ │ * ├───────┼─────┼─────┼─────╄─────╃─────┤(TL2)│ │(TL3)├─────╄─────╃─────┼─────┼─────┼───────┤ - * │ │ │ │ │ │ │ │ │ │ │ F1 │ F2 │ F3 │ F4 │ │ + * │ │ â”” │ â”´ │ ┘ │ │ │ │ │ │ │ F1 │ F2 │ F3 │ F4 │ │ * └─┬─────┼─────┼─────┼─────┼─────┼─────┴─────┘ └─────┴─────┼─────┼─────┼─────┼─────┼─────┬─┘ * │ │ │(MO1)│ │(MO4)│ │(MO4)│ │(MO1)│ │ │ * └─────┴─────┴─────┴─────┴─────┘ ┌─────┬─────┠┌─────┬─────┠└─────┴─────┴─────┴─────┴─────┘ @@ -156,9 +155,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [FMU] = KEYMAP( // left hand KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,UC(0x2713),KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,UC(0x2715),KC_TRNS, - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, UC(0x250C),UC(0x252C),UC(0x2510),UC(0x2500),UC(0x2502),KC_TRNS, + KC_TRNS, UC(0x251C),UC(0x253C),UC(0x2524),UC(0x2713),UC(0x2715), + KC_TRNS, UC(0x2514),UC(0x2534),UC(0x2518),KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_MS_L, KC_MS_U, KC_BTN1, @@ -245,6 +244,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // Runs just one time when the keyboard initializes. void matrix_init_user(void) { + set_unicode_input_mode(UC_LNX); }; @@ -279,3 +279,14 @@ void matrix_scan_user(void) } }; + + +// Override Unicode start method to use NEO_U instead of KC_U +void unicode_input_start (void) { + register_code(KC_LCTL); + register_code(KC_LSFT); + register_code(NEO_U); + unregister_code(NEO_U); + unregister_code(KC_LSFT); + unregister_code(KC_LCTL); +}; diff --git a/keyboards/ergodox/keymaps/jafo/jafo-Notes b/keyboards/ergodox/keymaps/jafo/jafo-Notes new file mode 100644 index 0000000000..9376125e90 --- /dev/null +++ b/keyboards/ergodox/keymaps/jafo/jafo-Notes @@ -0,0 +1,10 @@ +These are notes on how to build and deploy the firmware to Ez, but they are +from before the qmk restructuring. + +cd qmk_firmware/keyboard/ergodox_ez +make KEYMAP=jafo +cp ergodox_ez.hex keymaps/jafo/ +/tmp/teensy.64bit +Open hex keymap file +Program +Upload diff --git a/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf b/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf Binary files differnew file mode 100644 index 0000000000..189b49b128 --- /dev/null +++ b/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf diff --git a/keyboards/ergodox/keymaps/jafo/jafo_highres.png b/keyboards/ergodox/keymaps/jafo/jafo_highres.png Binary files differnew file mode 100644 index 0000000000..e3d7cef858 --- /dev/null +++ b/keyboards/ergodox/keymaps/jafo/jafo_highres.png diff --git a/keyboards/ergodox/keymaps/jafo/keymap.c b/keyboards/ergodox/keymaps/jafo/keymap.c new file mode 100644 index 0000000000..4f1428f2ba --- /dev/null +++ b/keyboards/ergodox/keymaps/jafo/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Grv | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | = | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Esc/Cmd| A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| L2 | | L2 |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" | Del | Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |Ctrl/Esc| Alt| | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_EQL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + GUI_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, TG(MDIA), + LT(SYMB,KC_GRV),KC_QUOT, KC_DELT, KC_LEFT,KC_RGHT, + CTL_T(KC_ESC), KC_LALT, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + TG(MDIA), KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| LEFT | DOWN | UP | RIGHT| | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | Lclk | Mclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN3, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/jafo/readme.md b/keyboards/ergodox/keymaps/jafo/readme.md new file mode 100644 index 0000000000..c870dfd050 --- /dev/null +++ b/keyboards/ergodox/keymaps/jafo/readme.md @@ -0,0 +1,20 @@ +# ErgoDox EZ "jafo" Configuration + +This is a layout based on the ErgoDox Ez default layout, but with some +customizations I made for my use-case. I use Linux, vi and the i3 window +manager, so I made these changes: + +- Arrow keys laid out in vi positions in media layer. + +- Esc (tap) and Win (held) to the left of A. i3 uses Win key for navigation + and having that be symmetric on the left and right makes it easier. + +- Grave accent below equals, I was having a hard time using ~ + +- Layer 2 switch below the L1 switch, so I can go into a mode where I get + arrow keys under my vi motion fingers. + +- Making the Ctrl (held) and Esc (tap) on my thumbs symmetric. Not sure I + need that with the Esc left of A and Ctrl on the Z and / keys when held... + + diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png Binary files differnew file mode 100644 index 0000000000..544b5658e9 --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keyboard-layout.png diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c new file mode 100644 index 0000000000..1d505f8e38 --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/keymap.c @@ -0,0 +1,180 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_norwegian.h" + +#define BASE 0 // default layer +#define BASE_MAC 1 // default layer mac +#define NUMB_FUNC 2 // numbers and function keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Keymap 0: Basic layer PC + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | * | [ | ] | { | } | ~ |Mac/PC| | ^ | $ | ( | ) | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | + | Q | W | E | R | T | " | | ' | Y | U | I | O | P | Ã… | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | / | A | S | D | F | G |------| |------| H | J | K | L | Ø | Æ | + * |--------+------+------+------+------+------| ; | | = |------+------+------+------+------+--------| + * | - | Z | X | C | V | B | | | | N | M | RIGHT| DOWN | UP | _ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Alt/esc| ! | ? | : | TAB | | LEFT | _ | & | | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,--------------. + * | # | ` | |Insert| % | + * ,------|------|------| |------+-------+------. + * | | | ´ | | Del | | | + * | Shift|Ctrl/.|------| |------| Enter |Space | + * | | |GUI/, | | Bspc | | | + * `--------------------' `---------------------' + */ +[BASE] = KEYMAP( + // left hand + KC_PAST, NO_LBRC, NO_RBRC, NO_LCBR, NO_RCBR, KC_FN2, TG(1), + KC_PPLS, KC_Q, KC_W, KC_E, KC_R, KC_T, NO_QUO2, + KC_PSLS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_PMNS, KC_Z, KC_X, KC_C, KC_V, KC_B, NO_SCLN, + ALT_T(KC_ESC), KC_EXLM , NO_QUES, NO_COLN, KC_TAB, + KC_HASH, KC_FN7, + KC_FN6, + KC_FN1,CTL_T(KC_DOT),GUI_T(KC_COMMA), + // right hand + KC_FN5, NO_DLR, NO_LPRN, NO_RPRN ,KC_FN3, KC_FN4,NO_AT, + NO_APOS, KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AA , + KC_H, KC_J, KC_K, KC_L, NO_OSLH, NO_AE, + NO_EQL, KC_N, KC_M, KC_RIGHT, KC_DOWN, KC_UP, NO_BSLS, + KC_LEFT, NO_UNDS, NO_AMPR, NO_PIPE, OSL(2), + KC_INSERT, KC_PERC, + KC_DELT, + KC_BSPC,KC_ENT,KC_SPC + ), +/* Keymap 1: Basic layer MACS (Same as pc, except for cmd/ctrl, which are swapped) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | | | { | } | | | | | $ | | | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | ' |------+------+------+------+------+--------| + * | | | | | | |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | |,/Ctrl| | | | ` | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | ` | | | | + * ,------|------|------| |------+------+------. + * | | | ´ | | | | | + * | |GUI/. |------| |------| | | + * | | |crtl/,| | | | | + * `--------------------' `--------------------' + */ +[BASE_MAC] = KEYMAP( + KC_TRNS, KC_TRNS,KC_TRNS, NO_LCBR_MAC,NO_RCBR_MAC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, NO_GRV_MAC, + KC_FN10, + KC_TRNS,GUI_T(KC_DOT) , CTL_T(KC_COMMA), + // right hand + KC_TRNS, NO_DLR_MAC, KC_TRNS,KC_TRNS,KC_FN8, KC_FN9,NO_AT_MAC, + NO_APOS_MAC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NO_BSLS_MAC, + KC_TRNS, KC_TRNS, KC_TRNS, NO_PIPE_MAC, OSL(2), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 2: Number ++´ánd Fn layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | F9 | F10 | F11 | F12 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 8 | 7 | 6 | 5 | 9 | | | | | F5 | F6 | F7 | F8 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 4 | 3 | 2 | 1 | 0 |------| |------| | F1 | F2 | F3 | F4 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | END | PGDWN| PGUP | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | HOME | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUMB_FUNC] = KEYMAP( + NO_ASTR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + NO_PLUS, KC_8, KC_7,KC_6,KC_5, KC_9 , KC_TRNS, + NO_SLSH , KC_4 , KC_3 , KC_2 , KC_1 , KC_0, + NO_MINS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_F5, KC_F6 , KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_TRNS, + KC_TRNS, KC_HOME, KC_TRNS, KC_END, KC_PGDN, KC_PGUP, KC_TRNS, + KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +) +}; + +enum macro_id { + TILDE_NO, LESS_NO, GRTR_NO, CIRC_NO, ACUT_NO, GRV_NO, LESS_NO_MAC, GRTR_NO_MAC, ACUT_NO_MAC +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_MODS_ONESHOT(MOD_LSFT), // Sticky shift light. Tap for the next keypress to be shifted. Hold for regular shift. + [2] = ACTION_MACRO(TILDE_NO), // Completed ~ character(pc and mac), no space needed. + [3] = ACTION_MACRO(LESS_NO), // < completed on keypress down, to avoid shifting the next character if it is not released first. + [4] = ACTION_MACRO(GRTR_NO), // > completed on keypress down, to avoid shifting the next character if it is not released first. + [5] = ACTION_MACRO(CIRC_NO), // Completed ^ character, no space needed. + [6] = ACTION_MACRO(ACUT_NO), // Completed ´ character, no space needed. + [7] = ACTION_MACRO(GRV_NO), // Completed ` character, no space needed. + [8] = ACTION_MACRO(LESS_NO_MAC), // < completed on keypress down, to avoid same button problem when typing <> quickly + [9] = ACTION_MACRO(GRTR_NO_MAC), // > completed on keypress down, to avoid same button problem when typing <> quickly + [10] = ACTION_MACRO(ACUT_NO_MAC), // Completed ´ character, no space needed +}; + + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + + switch (id) { + case TILDE_NO: + return (event.pressed ? MACRO( D(RALT), T(RBRC), U(RALT), T(SPC), END ) : MACRO_NONE); + case LESS_NO: + return (event.pressed ? MACRO( T(NUBS), END ) : MACRO_NONE); + case GRTR_NO: + return (event.pressed ? MACRO( D(LSFT), T(NUBS), U(LSFT), END ) : MACRO_NONE); + case CIRC_NO: + return (event.pressed ? MACRO( D(LSFT), T(RBRC), U(LSFT), T(SPC), END ) : MACRO_NONE); + case ACUT_NO: + return (event.pressed ? MACRO( D(RALT), T(EQL), U(RALT), T(SPC), END ) : MACRO_NONE); + case GRV_NO: + return (event.pressed ? MACRO( D(LSFT), T(EQL), T(SPC), U(LSFT), END ) : MACRO_NONE); + case LESS_NO_MAC: + return (event.pressed ? MACRO( T(GRV), END ) : MACRO_NONE); + case GRTR_NO_MAC: + return (event.pressed ? MACRO( D(LSFT), T(GRV), U(LSFT), END ) : MACRO_NONE); + case ACUT_NO_MAC: + return (event.pressed ? MACRO( T(EQL), T(SPC), END ) : MACRO_NONE); + } + return MACRO_NONE; +}; diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md new file mode 100644 index 0000000000..f7e8baf56a --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc/readme.md @@ -0,0 +1,30 @@ +# Norwegian setup with osx/pc toggle + +## Motivation +I wanted a Norwegian setup that worked in a similar way on both my Mac and PC. I also wanted the keyboard to translate from a standard Norwegian keyboard OS setup. + +## Overview +The setup is created to be programmer friendly. +- Most of the symbols used in code can be activated without using layers or shift key. +- You can reach the IDE/OS shortcut activators(Ctrl, Win/Cmd, Alt, Shift) with the thumb or the wrist. +- Navigation is prioritized, arrows below the home row. + +## PC/Mac toggle +The default setup is for Norwegian keyboard setting(on a PC(Windows or Linux) or Mac. Use the Mac/PC toggle button to switch between OSX and PC setup. The settings will be reverted to PC setup each time you restart/connect the keyboard. + +## Layers +Since symbols are prioritized in this setup, numbers and function keys are on a new layer. The easiest way to use the layer switch(and also the alt key), is to push your hand right below the little finger, on the key. You will then have all your fingers free to type numbers or press function keys. + +## Tap-shift +Tap for the next character to be shifted, hold down for regular shift. + +## Comma dot and escape +Comma, dot and escape share buttons with modifier keys. Tap to access these keys, hold down to use the keys as modifier keys. + +## Numpad symbols ++-/* are implemented with the numpad keycodes. The benefit is that they will work better with shortcuts in certain programs. For some reason, the default setting in the osx terminal is to not accept numpad characters for '/' and '-'. For a solution, see https://discussions.apple.com/thread/6613968?start=0&tstart=0. +If you really need the norwegian symbols in a program, you can access them using the number toggle button. + +## Layout + + diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png Binary files differnew file mode 100644 index 0000000000..462de5c56b --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keyboard-layout.png diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c new file mode 100644 index 0000000000..acf74a47d2 --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/keymap.c @@ -0,0 +1,180 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_norwegian.h" + +#define BASE 0 // default layer +#define BASE_MAC 1 // default layer mac +#define NUMB_FUNC 2 // numbers and function keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Keymap 0: Basic layer PC + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | * | [ | ] | { | } | ~ |Mac/PC| | ^ | $ | ( | ) | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | + | Q | W | F | P | G | " | | ' | J | L | U | Y | Ã… | Æ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | / | A | R | S | T | D |------| |------| H | N | E | I | O | Ø | + * |--------+------+------+------+------+------| ; | | = |------+------+------+------+------+--------| + * | - | Z | X | C | V | B | | | | K | M | RIGHT| DOWN | UP | _ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Alt/esc| ! | ? | : | TAB | | LEFT | _ | & | | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,--------------. + * | # | ` | |Insert| % | + * ,------|------|------| |------+-------+------. + * | | | ´ | | Del | | | + * | Shift|Ctrl/.|------| |------| Enter |Space | + * | | |GUI/, | | Bspc | | | + * `--------------------' `---------------------' + */ +[BASE] = KEYMAP( + // left hand + KC_PAST, NO_LBRC, NO_RBRC, NO_LCBR, NO_RCBR, KC_FN2, TG(1), + KC_PPLS, KC_Q, KC_W, KC_F, KC_P, KC_G, NO_QUO2, + KC_PSLS, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_PMNS, KC_Z, KC_X, KC_C, KC_V, KC_B, NO_SCLN, + ALT_T(KC_ESC), KC_EXLM , NO_QUES, NO_COLN, KC_TAB, + KC_HASH, KC_FN7, + KC_FN6, + KC_FN1,CTL_T(KC_DOT),GUI_T(KC_COMMA), + // right hand + KC_FN5, NO_DLR, NO_LPRN, NO_RPRN ,KC_FN3, KC_FN4,NO_AT, + NO_APOS, KC_J, KC_L, KC_U, KC_Y, NO_AA, NO_AE , + KC_H, KC_N, KC_E, KC_I, KC_O, NO_OSLH, + NO_EQL, KC_K, KC_M, KC_RIGHT, KC_DOWN, KC_UP, NO_BSLS, + KC_LEFT, NO_UNDS, NO_AMPR, NO_PIPE, OSL(2), + KC_INSERT, KC_PERC, + KC_DELT, + KC_BSPC,KC_ENT,KC_SPC + ), +/* Keymap 1: Basic layer MAC (Same as pc, except for cmd/ctrl, which are swapped) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | | | { | } | | | | | $ | | | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | ' |------+------+------+------+------+--------| + * | | | | | | |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | |,/Ctrl| | | | ` | |Num/fn| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | ` | | | | + * ,------|------|------| |------+------+------. + * | | | ´ | | | | | + * | |GUI/. |------| |------| | | + * | | |crtl/,| | | | | + * `--------------------' `--------------------' + */ +[BASE_MAC] = KEYMAP( + KC_TRNS, KC_TRNS,KC_TRNS, NO_LCBR_MAC,NO_RCBR_MAC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, NO_GRV_MAC, + KC_FN10, + KC_TRNS,GUI_T(KC_DOT) , CTL_T(KC_COMMA), + // right hand + KC_TRNS, NO_DLR_MAC, KC_TRNS,KC_TRNS,KC_FN8, KC_FN9,NO_AT_MAC, + NO_APOS_MAC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NO_BSLS_MAC, + KC_TRNS, KC_TRNS, KC_TRNS, NO_PIPE_MAC, OSL(2), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 2: Number ++´ánd Fn layer pc + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | F9 | F10 | F11 | F12 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 8 | 7 | 6 | 5 | 9 | | | | | F5 | F6 | F7 | F8 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 4 | 3 | 2 | 1 | 0 |------| |------| | F1 | F2 | F3 | F4 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | END | PGDWN| PGUP | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | HOME | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUMB_FUNC] = KEYMAP( + NO_ASTR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + NO_PLUS, KC_8, KC_7,KC_6,KC_5, KC_9 , KC_TRNS, + NO_SLSH , KC_4 , KC_3 , KC_2 , KC_1 , KC_0, + NO_MINS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_F5, KC_F6 , KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_TRNS, + KC_TRNS, KC_HOME, KC_TRNS, KC_END, KC_PGDN, KC_PGUP, KC_TRNS, + KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +) +}; + +enum macro_id { + TILDE_NO, LESS_NO, GRTR_NO, CIRC_NO, ACUT_NO, GRV_NO, LESS_NO_MAC, GRTR_NO_MAC, ACUT_NO_MAC +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_MODS_ONESHOT(MOD_LSFT), // Sticky shift light. Tap for the next keypress to be shifted. Hold for regular shift. + [2] = ACTION_MACRO(TILDE_NO), // Completed ~ character(pc and mac), no space needed. + [3] = ACTION_MACRO(LESS_NO), // < completed on keypress down, to avoid shifting the next character if it is not released first. + [4] = ACTION_MACRO(GRTR_NO), // > completed on keypress down, to avoid shifting the next character if it is not released first. + [5] = ACTION_MACRO(CIRC_NO), // Completed ^ character, no space needed. + [6] = ACTION_MACRO(ACUT_NO), // Completed ´ character, no space needed. + [7] = ACTION_MACRO(GRV_NO), // Completed ` character, no space needed. + [8] = ACTION_MACRO(LESS_NO_MAC), // < completed on keypress down, to avoid same button problem when typing <> quickly + [9] = ACTION_MACRO(GRTR_NO_MAC), // > completed on keypress down, to avoid same button problem when typing <> quickly + [10] = ACTION_MACRO(ACUT_NO_MAC), // Completed ´ character, no space needed +}; + + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + + switch (id) { + case TILDE_NO: + return (event.pressed ? MACRO( D(RALT), T(RBRC), U(RALT), T(SPC), END ) : MACRO_NONE); + case LESS_NO: + return (event.pressed ? MACRO( T(NUBS), END ) : MACRO_NONE); + case GRTR_NO: + return (event.pressed ? MACRO( D(LSFT), T(NUBS), U(LSFT), END ) : MACRO_NONE); + case CIRC_NO: + return (event.pressed ? MACRO( D(LSFT), T(RBRC), U(LSFT), T(SPC), END ) : MACRO_NONE); + case ACUT_NO: + return (event.pressed ? MACRO( D(RALT), T(EQL), U(RALT), T(SPC), END ) : MACRO_NONE); + case GRV_NO: + return (event.pressed ? MACRO( D(LSFT), T(EQL), T(SPC), U(LSFT), END ) : MACRO_NONE); + case LESS_NO_MAC: + return (event.pressed ? MACRO( T(GRV), END ) : MACRO_NONE); + case GRTR_NO_MAC: + return (event.pressed ? MACRO( D(LSFT), T(GRV), U(LSFT), END ) : MACRO_NONE); + case ACUT_NO_MAC: + return (event.pressed ? MACRO( T(EQL), T(SPC), END ) : MACRO_NONE); + } + return MACRO_NONE; +}; diff --git a/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md new file mode 100644 index 0000000000..aaaec3e534 --- /dev/null +++ b/keyboards/ergodox/keymaps/norwegian_programmer_osx_pc_colemak/readme.md @@ -0,0 +1,30 @@ +# Norwegian Colemak setup with osx/pc toggle + +## Motivation +I wanted a Norwegian Colemak setup that worked in a similar way on both my Mac and PC. I also wanted the keyboard to translate from a standard Norwegian keyboard OS setup. + +## Overview +The setup is created to be programmer friendly. +- Most of the symbols used in code can be activated without using layers or shift key. +- You can reach the IDE/OS shortcut activators(Ctrl, Win/Cmd, Alt, Shift) with the thumb or the wrist. +- Navigation is prioritized, arrows below the home row. + +## PC/Mac toggle +The default setup is for Norwegian keyboard setting(not colemak software variants) on a PC(Windows or Linux) or Mac. Use the Mac/PC toggle button to switch between OSX and PC setup. The settings will be reverted to PC setup each time you restart/connect the keyboard. + +## Layers +Since symbols are prioritized in this setup, numbers and function keys are on a new layer. The easiest way to use the layer switch(and also the alt key), is to push your hand right below the little finger, on the key. You will then have all your fingers free to type numbers or press function keys. + +## Tap-shift +Tap for the next character to be shifted, hold down for regular shift. + +## Comma dot and escape +Comma, dot and escape share buttons with modifier keys. Tap to access these keys, hold down to use the keys as modifier keys. + +## Numpad symbols ++-/* are implemented with the numpad keycodes. The benefit is that they will work better with shortcuts in certain programs. For some reason, the default setting in the osx terminal is to not accept numpad characters for '/' and '-'. For a solution, see https://discussions.apple.com/thread/6613968?start=0&tstart=0. +If you really need the norwegian symbols in a program, you can access them using the number toggle button. + +## Layout + + diff --git a/keyboards/ergodox/keymaps/ordinary/keymap.c b/keyboards/ergodox/keymaps/ordinary/keymap.c index bf0574ea2c..302c41cc8d 100644 --- a/keyboards/ergodox/keymaps/ordinary/keymap.c +++ b/keyboards/ergodox/keymaps/ordinary/keymap.c @@ -3,21 +3,18 @@ #include "debug.h" #include "action_layer.h" #include "action_util.h" -#include "mousekey.h" #define BASE 0 // default layer #define SYMB 1 // symbols layer #define MDIA 2 // media layer #define SPEC 3 // special layer -#define LCaps 10 // left caps-shift key -#define LSymb 11 // left symbol-shift key -#define LMdia 12 // left media-shift key -#define LSpec 13 // left special-shift key -#define RCaps 14 // right caps-shift key -#define RSymb 15 // right symbol-shift key -#define RMdia 16 // right media-shift key -#define RSpec 17 // right special-shift key +#define LSymb 10 // left symbol-shift key +#define LMdia 11 // left media-shift key +#define LSpec 12 // left special-shift key +#define RSymb 13 // right symbol-shift key +#define RMdia 14 // right media-shift key +#define RSpec 15 // right special-shift key #define MUL 20 // mouse up left #define MUR 21 // mouse up right @@ -25,123 +22,124 @@ #define MDR 23 // mouse down right /* - * The Ordinary Layout for the Ergodox EZ keyboard, v4 - * + * The Ordinary Layout for the Ergodox EZ keyboard, v4.20 + * * Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com * * No rights reserved. This software is in the public domain. * Credit me if you are friendly but if you're a jerk don't bother. - * + * If you use or modify this layout I would love to hear from you. + * * Details: readme.md - * https://github.com/nrrkeene/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/ordinary + * https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary */ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/******* Base Layer ******************************************************************************************************** +/******* Base Layer **************************************************************************************************** * - * ,------------------------------------------------------. ,------------------------------------------------------. - * | Special `~ | 1 | 2 | 3 | 4 | 5 | ESC | | - | 6 | 7 | 8 | 9 | 0 | =+ Special | - * |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------| - * | Media Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \| Media | - * |------------+------+------+------+------+------| | | |------+------+------+------+------+------------| - * | Symbol | A | S | D | F | G |------| |------| H | J | K | L | ; | '" Symbol | - * |------------+------+------+------+------+------|Shift | | Tab |------+------+------+------+------+------------| - * | Capitals | Z | X | C | V | B | -Tab | | | N | M | , | . | / | Capitals | - * `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------' - * | LCtrl | Meh |Hyper | LAlt | LGui | | RGui | RAlt | Hyper| Meh | RCtrl | - * `-----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | Home | End | | Left | Right| - * ,------|------|------| |------+------+------. - * | | | PgUp | | Up | | | - * |Backsp| Del |------| |------| Enter| Space| - * | | | PgDn | | Down | | | - * `--------------------' `--------------------' + * ,------------------------------------------------------. ,------------------------------------------------------. + * | Special `~ | 1 | 2 | 3 | 4 | 5 | ESC | | - | 6 | 7 | 8 | 9 | 0 | =+ Special | + * |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------| + * | Media Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \| Media | + * |------------+------+------+------+------+------| | | |------+------+------+------+------+------------| + * | Symbol | A | S | D | F | G |------| |------| H | J | K | L | ; | '" Symbol | + * |------------+------+------+------+------+------|Shift | | Tab |------+------+------+------+------+------------| + * | Capitals | Z | X | C | V | B | -Tab | | | N | M | , | . | / | Capitals | + * `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------' + * | LCtrl | Meh |Hyper | LAlt | LGui | | RGui | RAlt | Hyper| Meh | RCtrl | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | Home | End | | Left | Right| + * ,------|------|------| |------+------+------. + * | | | PgUp | | Up | | | + * |Backsp| Del |------| |------| Enter| Space| + * | | | PgDn | | Down | | | + * `--------------------' `--------------------' */ [BASE] = KEYMAP( // left hand - F(LSpec),KC_1,KC_2,KC_3 ,KC_4 ,KC_5 ,KC_ESC + F(LSpec) ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_ESC ,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC ,M(LSymb) ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G -,M(LCaps) ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) +,KC_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) ,KC_LCTL ,KC_MEH ,KC_HYPR,KC_LALT,KC_LGUI ,KC_HOME,KC_END ,KC_PGUP ,KC_BSPC,KC_DEL ,KC_PGDN - // right hand - ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) - ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) - ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,F(RSymb) - ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,M(RCaps) - ,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH ,KC_RCTL - ,KC_LEFT ,KC_RGHT - ,KC_UP - ,KC_DOWN ,KC_ENT ,KC_SPC + // right hand + ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) + ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) + ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,F(RSymb) + ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_RSFT + ,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH ,KC_RCTL + ,KC_LEFT ,KC_RGHT + ,KC_UP + ,KC_DOWN ,KC_ENT ,KC_SPC ), -/******* Symbols Layer ***************************************************************************************************** +/******* Symbols Layer ************************************************************************************************* * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | Esc | | - | F6 | F7 | F8 | F9 | F10 | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | ! | @ | { | } | & | < | | > | | | 7 | 8 | 9 | / | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | # | $ | ( | ) | ` |------| |------| / | 4 | 5 | 6 | * | | - * |-----------+------+------+------+------+------| Tab | | Shift|------+------+------+------+------+-----------| - * | | % | ^ | [ | ] | ~ | | | -Tab| \ | 1 | 2 | 3 | - | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | LCtrl | Meh |Hyper | LAlt | LGui | |RGui/0|RAlt/.|Hypr/=|Meh/+ |RCtrl/Ent| - * `-----------------------------------' `-------------------------------------' - * ,-------------. ,-------------. - * | Left | Right| | Home | End | - * ,------|------|------| |------+------+------. - * | | | Up | | PgUp | | | - * |Space |Enter |------| |------|BackSp| Del | - * | | | Down | | PgDn | | | - * `--------------------' `--------------------' + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | Esc | | - | F6 | F7 | F8 | F9 | F10 | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | ! | @ | { | } | & | < | | > | | | 7 | 8 | 9 | / | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | # | $ | ( | ) | ` |------| |------| / | 4 | 5 | 6 | * | | + * |-----------+------+------+------+------+------| Tab | | Shift|------+------+------+------+------+-----------| + * | | % | ^ | [ | ] | ~ | | | -Tab| \ | 1 | 2 | 3 | - | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | LCtrl | Meh |Hyper | LAlt | LGui | | 0 | . | = | + | Ent | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | Left | Right| | Home | End | + * ,------|------|------| |------+------+------. + * | | | Up | | PgUp | | | + * |Space |Enter |------| |------|BackSp| Del | + * | | | Down | | PgDn | | | + * `--------------------' `--------------------' */ [SYMB] = KEYMAP( // left hand KC_TRNS ,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_ESC ,KC_TRNS ,KC_EXLM ,KC_AT ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM) -,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV +,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV ,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_TAB -,KC_LCTL ,KC_MEH ,KC_HYPR,KC_LALT ,KC_LGUI +,KC_LCTL ,KC_MEH ,KC_HYPR ,KC_LALT ,KC_LGUI ,KC_LEFT ,KC_RGHT ,KC_UP ,KC_SPC ,KC_ENT ,KC_DOWN - // right hand - ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS - ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS - ,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS - ,LSFT(KC_TAB),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS - ,GUI_T(KC_0),ALT_T(KC_DOT),ALL_T(KC_EQL),MEH_T(KC_PLUS),CTL_T(KC_ENT) - ,KC_HOME ,KC_END - ,KC_PGUP - ,KC_PGDN ,KC_BSPC ,KC_DEL + // right hand + ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS + ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS + ,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS + ,LSFT(KC_TAB),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS + ,KC_0 ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT + ,KC_HOME ,KC_END + ,KC_PGUP + ,KC_PGDN ,KC_BSPC ,KC_DEL ), /******* Media Layer ******************************************************************************************************* * - * ,---------------------------------------------------------------. ,---------------------------------------------------------------. - * | | F11 | F12 | F13 | F14 | F15 | Esc | | | F16 | F17 | F18 | F19 | F20 | | - * |------+---------+---------+---------+---------+----------------| |------+---------+---------+---------+---------+---------+------| - * | |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll| |Scroll|PrintScrn| Home | Up | PgUp | Mail | | - * |------+---------+---------+---------+---------+---------| Up | | Up |---------+---------+---------+---------+---------+------| - * | | Sleep |MouseLeft|MouseDown|MouseRght|Volume Dn|------| |------| Num Lock| Left | Down | Right | MyComp | | - * |------+---------+---------+---------+---------+---------|Scroll| |Scroll|---------+---------+---------+---------+---------+------| - * | | |MouseDnLf|MouseDown|MouseDnRg| Mute | Down | | Down | | End | Down | PgDn | | | - * `------+---------+---------+---------+---------+----------------' `----------------+---------+---------+---------+---------+------' - * |LCtrl| Meh | MClick | LClick | R Click| |Cmd/Insrt|Optn/Del | Hyper | Meh |RCtrl| - * `---------------------------------------------' `---------------------------------------------' - * ,-------------. ,-------------. - * | Stop |Refrsh| | Prev | Next | - * ,------|------|------| |------+------+------. - * |Brwser|Brwser|Search| |VolUp | | | - * |Back | Fwd |------| |------| Stop | Play-| - * | | | Home | |VolDn | | Pause| - * `--------------------' `--------------------' + * ,---------------------------------------------------------------. ,---------------------------------------------------------------. + * | | F11 | F12 | F13 | F14 | F15 | Esc | | | F16 | F17 | F18 | F19 | F20 | | + * |------+---------+---------+---------+---------+----------------| |------+---------+---------+---------+---------+---------+------| + * | |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll| |Scroll|PrintScrn| Home | Up | PgUp | Mail | | + * |------+---------+---------+---------+---------+---------| Up | | Up |---------+---------+---------+---------+---------+------| + * | | Sleep |MouseLeft|MouseDown|MouseRght|Volume Dn|------| |------| Num Lock| Left | Down | Right | MyComp | | + * |------+---------+---------+---------+---------+---------|Scroll| |Scroll|---------+---------+---------+---------+---------+------| + * | | |MouseDnLf|MouseDown|MouseDnRg| Mute | Down | | Down | | End | Down | PgDn | | | + * `------+---------+---------+---------+---------+----------------' `----------------+---------+---------+---------+---------+------' + * |LCtrl| Meh | MClick | LClick | R Click| |Cmd/Insrt|Optn/Del | Hyper | Meh |RCtrl| + * `---------------------------------------------' `---------------------------------------------' + * ,-------------. ,-------------. + * | Stop |Refrsh| | Prev | Next | + * ,------|------|------| |------+------+------. + * |Brwser|Brwser|Search| |VolUp | | | + * |Back | Fwd |------| |------| Stop | Play-| + * | | | Home | |VolDn | | Pause| + * `--------------------' `--------------------' */ [MDIA] = KEYMAP( // left hand @@ -166,67 +164,63 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /******* Special Layer ***************************************************************************************************** * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | Esc | | | | | | | | | | | | Bspc | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | |------| |------| | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | RShift | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' + * ,-------------------------------------------------------. ,-------------------------------------------------------. + * | | Esc | | | | | | | | | | | - | Bspc | | + * |-------------+------+------+------+------+-------------| |------+------+------+------+------+------+-------------| + * | Media Lock | | | | | | | | | | | | [ | ] | Media Lock | + * |-------------+------+------+------+------+------| | | |------+------+------+------+------+-------------| + * | Symbol Lock | | | | | |------| |------| | | | | | Symbol Lock | + * |-------------+------+------+------+------+------| | | |------+------+------+------+------+-------------| + * | Caps Lock | | | | | | | | | | | | | | Caps Lock | + * `-------------+------+------+------+------+-------------' `-------------+------+------+------+------+-------------' + * | | | | | | | | | | | | + * `------------------------------------' `------------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' */ [SPEC] = KEYMAP( // left hand KC_TRNS ,KC_ESC ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_CAPS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS,KC_TRNS ,KC_TRNS - // right hand - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_BSPC ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_RSFT - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS + // right hand + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_MINS ,KC_BSPC ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_LBRC ,KC_RBRC ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_CAPS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ) }; const uint16_t PROGMEM fn_actions[] = { // the faux shift keys are implemented as macro taps - [LCaps] = ACTION_MACRO_TAP(LCaps) - ,[LSymb] = ACTION_MACRO_TAP(LSymb) + [LSymb] = ACTION_MACRO_TAP(LSymb) ,[LMdia] = ACTION_MACRO_TAP(LMdia) ,[LSpec] = ACTION_MACRO_TAP(LSpec) - ,[RCaps] = ACTION_MACRO_TAP(RCaps) ,[RSymb] = ACTION_MACRO_TAP(RSymb) ,[RMdia] = ACTION_MACRO_TAP(RMdia) ,[RSpec] = ACTION_MACRO_TAP(RSpec) }; -uint16_t caps_shift = 0; uint16_t symb_shift = 0; uint16_t mdia_shift = 0; +uint16_t spec_shift = 0; -bool symb_lock = false; bool mdia_lock = false; +bool symb_lock = false; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { @@ -237,50 +231,28 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // only because sometimes rapid pressing led to irregular events; this way the states // are self healing during use. - case LCaps: // both caps-shift keys trigger Left Shift - case RCaps: // so they don't interfere with the magic combo - if (record->event.pressed && !record->tap.count) { - if(++caps_shift > 2) caps_shift = 2; - if(caps_shift == 2) { - register_code(KC_CAPS); - unregister_code(KC_CAPS); - } else if(caps_shift == 1) { - register_code(KC_LSFT); - } - } else { - if(--caps_shift < 0) caps_shift = 0; - if(caps_shift == 0) unregister_code(KC_LSFT); - } - break; - - case LSymb: - if (record->event.pressed) { - if(++symb_shift > 2) symb_shift = 2; - if(symb_shift == 2) { - symb_lock = !symb_lock; - } else if(symb_shift == 1) { - layer_on(SYMB); - } - } else { - if(--symb_shift < 0) symb_shift = 0; - if((symb_shift == 0) && (!symb_lock)) layer_off(SYMB); + case LSymb: // + if (record->event.pressed) { // when the LSymb button is pressed + if(++symb_shift > 2) mdia_shift = 2; // increment the symb shift count, max two + if(spec_shift) symb_lock = !symb_lock; // if the Special layer is on, toggle the shift lock + layer_on(SYMB); // in any case, turn on the Symbols layer + } else { // when the LSymb button is released + if(--symb_shift < 0) symb_shift = 0; // decrement the shift count, minimum zero + if((!symb_shift) && (!symb_lock)) layer_off(SYMB); // if both shifts are released and the lock is off, turn off the Symbols layer } break; case LMdia: if (record->event.pressed) { - if (record->tap.count && (!mdia_shift) && (!mdia_lock)) { + if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { register_code(KC_TAB); } else { + if(spec_shift) mdia_lock = !mdia_lock; if(++mdia_shift > 2) mdia_shift = 2; - if(mdia_shift == 2) { - mdia_lock = !mdia_lock; - } else if(mdia_shift == 1) { - layer_on(MDIA); - } + layer_on(MDIA); } } else { - if(record->tap.count && (!mdia_shift) && (!mdia_lock)) { + if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { unregister_code(KC_TAB); } else { if(--mdia_shift < 0) mdia_shift = 0; @@ -290,35 +262,36 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) break; case LSpec: - if (record->event.pressed) { - if (record->tap.count && !record->tap.interrupted) { - register_code(KC_GRV); + if (record->event.pressed) { // when the LSpec button is pressed + if(symb_shift) symb_lock == !symb_lock; // if another layer button is engaged, then + else if(mdia_shift) mdia_lock = !mdia_lock; // lock that layer, be it caps or symb or mdia + else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) { + register_code(KC_GRV); // otherwise, if it's an uninterrupted tap, emit a char } else { - layer_on(SPEC); + if(++spec_shift > 2) spec_shift = 2; + layer_on(SPEC); // otherwise, turn on the Special layer } } else { - if(record->tap.count && !record->tap.interrupted) { + if(record->tap.count && !record->tap.interrupted && (!spec_shift)) { unregister_code(KC_GRV); } else { - layer_off(SPEC); + if(--spec_shift < 0) spec_shift = 0; + if(!spec_shift) layer_off(SPEC); } } break; case RSymb: if (record->event.pressed) { - if (record->tap.count && (!symb_shift) && (!symb_lock)) { + if (record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) { register_code(KC_QUOT); } else { if(++symb_shift > 2) symb_shift = 2; - if(symb_shift == 2) { - symb_lock = !symb_lock; - } else if(symb_shift == 1) { - layer_on(SYMB); - } + if(spec_shift) symb_lock = !symb_lock; + layer_on(SYMB); } } else { - if(record->tap.count && symb_shift == 0) { + if(record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) { unregister_code(KC_QUOT); } else { if(--symb_shift < 0) symb_shift = 0; @@ -329,18 +302,15 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) case RMdia: if (record->event.pressed) { - if (record->tap.count && (!mdia_shift) && (!mdia_lock)) { + if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { register_code(KC_BSLS); } else { if(++mdia_shift > 2) mdia_shift = 2; - if(mdia_shift == 2) { - mdia_lock = !mdia_lock; - } else if(mdia_shift == 1) { - layer_on(MDIA); - } + if(spec_shift) mdia_lock = !mdia_lock; + layer_on(MDIA); } } else { - if(record->tap.count && (!mdia_shift) && (!mdia_lock)) { + if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { unregister_code(KC_BSLS); } else { if(--mdia_shift < 0) mdia_shift = 0; @@ -351,16 +321,20 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) case RSpec: if (record->event.pressed) { - if (record->tap.count && !record->tap.interrupted) { + if(symb_shift) symb_lock = !symb_lock; + else if(mdia_shift) mdia_lock = !mdia_lock; + else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) { register_code(KC_EQL); } else { + if(++spec_shift > 2) spec_shift = 2; layer_on(SPEC); } } else { - if(record->tap.count && !record->tap.interrupted) { + if(record->tap.count && !record->tap.interrupted && (!spec_shift)) { unregister_code(KC_EQL); } else { - layer_off(SPEC); + if(--spec_shift < 0) spec_shift = 0; + if(!spec_shift) layer_off(SPEC); } } break; @@ -419,7 +393,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // none break; } - + return MACRO_NONE; }; @@ -431,7 +405,9 @@ void matrix_init_user(void) { // Runs constantly in the background, in a loop. void matrix_scan_user(void) { // shift or caps lock turns on red light - if(caps_shift || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK))) { + if((keyboard_report->mods & MOD_BIT(KC_LSFT)) + || (keyboard_report->mods & MOD_BIT(KC_RSFT)) + || (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK))) { ergodox_right_led_1_on(); } else { ergodox_right_led_1_off(); @@ -451,4 +427,3 @@ void matrix_scan_user(void) { ergodox_right_led_3_off(); } }; - diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png Binary files differindex 9c561a10aa..831db4f5d3 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt index 25731ea2e6..7763c3d37e 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt @@ -1,24 +1,24 @@ [{x:3.5},"#\n3",{x:10.5},"*\n8"], [{y:-0.875,x:2.5},"@\n2",{x:1},"$\n4",{x:8.5},"&\n7",{x:1},"(\n9"], [{y:-0.875,x:5.5},"%\n5",{c:"#ff4444"},"Esc",{x:4.5,c:"#cccccc"},"_\n\n\n\n\n\n-","^\n6"], -[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n~\n\n\n\nShift\n`",{c:"#cccccc"},"!\n1",{x:14.5},")\n0",{c:"#2277ff",w:1.5},"+\n\nSpecial\n\n\n\n=\nShift"], +[{y:-0.875,c:"#c6c600",w:1.5},"Special\n\n~\n\n\n\nShift\n`",{c:"#cccccc"},"!\n1",{x:14.5},")\n0",{c:"#c6c600",w:1.5},"+\n\nSpecial\n\n\n\n=\nShift"], [{y:-0.375,x:3.5,c:"#cccccc"},"E",{x:10.5},"I"], [{y:-0.875,x:2.5},"W",{x:1},"R",{x:8.5},"U",{x:1},"O"], [{y:-0.875,x:5.5},"T",{h:1.5},"{\n\n\n\n\n\n[",{x:4.5,h:1.5},"}\n\n\n\n\n\n]","Y"], -[{y:-0.875,c:"#2277ff",w:1.5},"Media\n\nTab\n\n\n\nShift",{c:"#cccccc"},"Q",{x:14.5},"P",{c:"#2277ff",w:1.5},"|\n\\\nMedia\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#cccccc"},"D",{x:10.5},"K"], +[{y:-0.875,c:"#c6c600",t:"#002299",w:1.5},"Media\n\nTab\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"Q",{x:14.5},"P",{c:"#c6c600",t:"#002299",w:1.5},"|\n\\\nMedia\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000"},"D",{x:10.5},"K"], [{y:-0.875,x:2.5},"S",{x:1},"F",{x:8.5},"J",{x:1},"L"], [{y:-0.875,x:5.5},"G",{x:6.5},"H"], -[{y:-0.875,c:"#2277ff",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc"},"A",{x:14.5},":\n;",{c:"#2277ff",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"], -[{y:-0.625,x:6.5,c:"#54d6de",fa:[0,0,0,1],h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"], +[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"A",{x:14.5},":\n;",{c:"#c6c600",t:"#007d00",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"], +[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",fa:[0,0,0,1],h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"], [{y:-0.75,x:3.5,c:"#cccccc"},"C",{x:10.5},"<\n,"], [{y:-0.875,x:2.5},"X",{x:1},"V",{x:8.5},"M",{x:1},">\n."], [{y:-0.875,x:5.5},"B",{x:6.5},"N"], -[{y:-0.875,c:"#2277ff",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#cccccc"},"Z",{x:14.5},"?\n/",{c:"#2277ff",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#77aaff"},"Option\n\n\nLAlt",{x:10.5},"Option\n\n\nRAlt"], +[{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"Z",{x:14.5},"?\n/",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#dddd77",t:"#000000"},"Option\n\n\nLAlt",{x:10.5},"Option\n\n\nRAlt"], [{y:-0.875,x:2.5},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5},"Cmd\n\n\nSuper",{x:1},"Hyper"], [{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Ctrl\n\n\nRCtrl"], -[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#54d6de"},"Home","End"], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Home","End"], [{h:2},"< Del\n\n\nBackspace",{h:2},"Del >\n\n\nDelete","Page\n\n\n\n\n\nUp"], [{x:2},"Page\n\n\n\n\n\nDown"], [{r:-30,rx:13,y:-1,x:-3},"Left","Right"], diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png Binary files differindex 99e5ed80b1..5ff3f53385 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt index 4eccc9f350..e1467b22e1 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt @@ -1,27 +1,27 @@ [{x:3.5,c:"#99de2a"},"F13",{x:10.5},"F18"], [{y:-0.875,x:2.5},"F12",{x:1},"F14",{x:8.5},"F17",{x:1},"F19"], [{y:-0.875,x:5.5},"F15",{c:"#ff4444"},"Esc",{x:4.5,c:"#737373",a:7},"",{c:"#99de2a",a:4},"F16"], -[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n\n\n\n\nShift",{c:"#99de2a"},"F11",{x:14.5},"F20",{c:"#2277ff",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#ff8500"},"Mouse\n\n\n\n\n\nUp",{x:10.5},"Cursor\n\n\n\n\n\nUp"], -[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nUpLeft",{x:1},"Mouse\n\n\n\n\n\nUpRgt",{x:8.5,c:"#ffb063"},"Home",{x:1},"Page\n\n\n\n\n\nUp"], -[{y:-0.875,x:5.5,c:"#e6e067"},"Vol\n\n\n\n\n\nUp",{c:"#ffb063",h:1.5},"Scroll\n\n\n\n\n\nUp",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nUp",{c:"#e6e067"},"Print\n\n\n\n\n\nScreen"], -[{y:-0.875,c:"#000000",t:"#ff0000",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#e6e067",t:"#000000"},"Shut\n\n\n\n\n\nDown",{x:14.5},"Mail",{c:"#000000",t:"#ff0000",w:1.5},"\n\nMedia\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#ff8500",t:"#000000"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"], +[{y:-0.875,c:"#c6c600",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F11",{x:14.5},"F20",{c:"#c6c600",w:1.5},"\n\nShift\n\n\n\n\nLock"], +[{y:-0.375,x:3.5,c:"#0066cc"},"Mouse\n\n\n\n\n\nUp",{x:10.5},"Cursor\n\n\n\n\n\nUp"], +[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nUpLeft",{x:1},"Mouse\n\n\n\n\n\nUpRgt",{x:8.5,c:"#1e8fff"},"Home",{x:1},"Page\n\n\n\n\n\nUp"], +[{y:-0.875,x:5.5,c:"#9977ee"},"Vol\n\n\n\n\n\nUp",{c:"#1e8fff",h:1.5},"Scroll\n\n\n\n\n\nUp",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nUp",{c:"#9977ee"},"Print\n\n\n\n\n\nScreen"], +[{y:-0.875,c:"#000000",t:"#3f68ff",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#9977ee",t:"#000000"},"Shut\n\n\n\n\n\nDown",{x:14.5},"Mail",{c:"#000000",t:"#3f68ff",w:1.5},"\n\nMedia\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"], [{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nLeft",{x:1},"Mouse\n\n\n\n\n\nRight",{x:8.5},"Cursor\n\n\n\n\n\nLeft",{x:1},"Cursor\n\n\n\n\n\nRight"], -[{y:-0.875,x:5.5,c:"#e6e067"},"Vol\n\n\n\n\n\nDown",{x:6.5},"Num\n\n\n\n\n\nLock"], -[{y:-0.875,c:"#2277ff",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#e6e067"},"Sleep",{x:14.5},"My\n\n\n\n\n\nComp",{c:"#2277ff",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], -[{y:-0.625,x:6.5,c:"#ffb063",h:1.5},"Scroll\n\n\n\n\n\nDown",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nDown"], -[{y:-0.75,x:3.5,c:"#ff8500"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"], -[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#ffb063"},"End",{x:1},"Page\n\n\n\n\n\nDown"], -[{y:-0.875,x:5.5,c:"#e6e067"},"Mute",{x:6.5,c:"#737373",a:7},""], -[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#ff8500"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#ffb063",fa:[0,0,0,1]},"Delete\n\n\nOption"], -[{y:-0.875,x:2.5,c:"#ff8500"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#ffb063"},"Insert\n\n\nCmd",{x:1,c:"#77aaff"},"Hyper"], +[{y:-0.875,x:5.5,c:"#9977ee"},"Vol\n\n\n\n\n\nDown",{x:6.5},"Num\n\n\n\n\n\nLock"], +[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#9977ee",t:"#000000"},"Sleep",{x:14.5},"My\n\n\n\n\n\nComp",{c:"#c6c600",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], +[{y:-0.625,x:6.5,c:"#1e8fff",t:"#000000",h:1.5},"Scroll\n\n\n\n\n\nDown",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nDown"], +[{y:-0.75,x:3.5,c:"#0066cc"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"], +[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#1e8fff"},"End",{x:1},"Page\n\n\n\n\n\nDown"], +[{y:-0.875,x:5.5,c:"#9977ee"},"Mute",{x:6.5,c:"#737373",a:7},""], +[{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#1e8fff",fa:[0,0,0,1]},"Delete\n\n\nOption"], +[{y:-0.875,x:2.5,c:"#0066cc"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#1e8fff"},"Insert\n\n\nCmd",{x:1,c:"#dddd77"},"Hyper"], [{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Crtl\n\n\nRCtrl"], -[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ccbb00"},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#6633ee"},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"], [{h:2},"< Web\n\n\nBrowser",{h:2},"Web >\n\n\nBrowser","Search\n\n\nBrowser"], [{x:2},"Home\n\n\nBrowser"], [{r:-30,rx:13,y:-1,x:-3},"Prev\n\n\nAudio\n\n\nTrack","Next\n\n\nAudio\n\n\nTrack"], -[{x:-3,c:"#e6e067"},"Vol\n\n\n\n\n\nUp",{c:"#ccbb00",h:2},"Stop\n\n\nAudio",{h:2},"Play\n\n\nAudio\n\n\nPause"], -[{x:-3,c:"#e6e067"},"Vol\n\n\n\n\n\nDown"] +[{x:-3,c:"#9977ee"},"Vol\n\n\n\n\n\nUp",{c:"#6633ee",h:2},"Stop\n\n\nAudio",{h:2},"Play\n\n\nAudio\n\n\nPause"], +[{x:-3,c:"#9977ee"},"Vol\n\n\n\n\n\nDown"] diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png Binary files differindex 6eecf447ee..4fb9d1d166 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt index a08827c6de..97f40f9dbc 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt @@ -1,21 +1,21 @@ [{x:3.5,a:7},"",{x:10.5},""], -[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], -[{y:-0.875,x:5.5},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""], -[{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#54d6de"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"_\n\n\n\n\n\n-"], +[{y:-0.875,x:5.5,a:7},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""], +[{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#ff8500"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"{\n["], +[{y:-0.875,x:5.5,a:7},"",{h:1.5},"",{x:4.5,h:1.5},"",""], +[{y:-0.875,c:"#c6c600",t:"#002299",a:4,w:1.5},"Media\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5,a:4},"\n\n}\n]",{c:"#c6c600",t:"#002299",w:1.5},"Media\n\n\n\n\n\nLock"], [{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""], -[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], -[{y:-0.875,x:5.5},"",{h:1.5},"",{x:4.5,h:1.5},"",""], -[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""], -[{y:-0.375,x:3.5},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], [{y:-0.875,x:5.5},"",{x:6.5},""], -[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""], -[{y:-0.625,x:6.5,h:1.5},"",{x:4.5,h:1.5},""], +[{y:-0.875,c:"#c6c600",t:"#007d00",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#007d00",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock"], +[{y:-0.625,x:6.5,c:"#cccccc",t:"#000000",a:7,h:1.5},"",{x:4.5,h:1.5},""], [{y:-0.75,x:3.5},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], [{y:-0.875,x:5.5},"",{x:6.5},""], -[{y:-0.875,w:1.5},"","",{x:14.5},"",{c:"#2277ff",w:1.5},"RShift"], -[{y:-0.375,x:3.5,c:"#cccccc"},"",{x:10.5},""], +[{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock"], +[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""], [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], [{y:-0.75,x:0.5},"","",{x:14.5},"",""], [{r:30,rx:6.5,ry:4.25,y:-1,x:1},"",""], diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png Binary files differindex e4de64a96f..dd90863295 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt index e199f5c59f..001bf370d8 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt @@ -1,24 +1,24 @@ [{x:3.5,c:"#99de2a"},"F3",{x:10.5},"F8"], [{y:-0.875,x:2.5},"F2",{x:1},"F4",{x:8.5},"F7",{x:1},"F9"], [{y:-0.875,x:5.5},"F5",{c:"#ff4444"},"Esc",{x:4.5,c:"#bbddbb"},"_\n\n\n\n\n\n-",{c:"#99de2a"},"F6"], -[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n\n\n\n\nShift",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#2277ff",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], +[{y:-0.875,c:"#c6c600",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#c6c600",w:1.5},"\n\nShift\n\n\n\n\nLock"], [{y:-0.375,x:3.5,c:"#bbddbb"},"{",{x:10.5,c:"#89b087"},"8"], [{y:-0.875,x:2.5,c:"#bbddbb"},"@",{x:1},"}",{x:8.5,c:"#89b087"},"7",{x:1},"9"], [{y:-0.875,x:5.5,c:"#bbddbb"},"&",{h:1.5},"<",{x:4.5,h:1.5},">","|"], -[{y:-0.875,c:"#2277ff",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb"},"!",{x:14.5,c:"#89b087"},"/",{c:"#2277ff",w:1.5},"\n\nMedia\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#bbddbb"},"(",{x:10.5,c:"#89b087"},"5"], +[{y:-0.875,c:"#c6c600",t:"#002299",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"!",{x:14.5,c:"#89b087"},"/",{c:"#c6c600",t:"#002299",w:1.5},"\n\nMedia\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#bbddbb",t:"#000000"},"(",{x:10.5,c:"#89b087"},"5"], [{y:-0.875,x:2.5,c:"#bbddbb"},"$",{x:1},")",{x:8.5,c:"#89b087"},"4",{x:1},"6"], [{y:-0.875,x:5.5,c:"#bbddbb"},"`",{x:6.5},"/"], -[{y:-0.875,c:"#000000",t:"#ff0000",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], -[{y:-0.625,x:6.5,c:"#54d6de",t:"#000000",fa:[0,0,0,1],h:1.5},"Tab >\n\n\nTab",{x:4.5,h:1.5},"< Tab\n\n\nShift Tab"], +[{y:-0.875,c:"#000000",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], +[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",fa:[0,0,0,1],h:1.5},"Tab >\n\n\nTab",{x:4.5,h:1.5},"< Tab\n\n\nShift Tab"], [{y:-0.75,x:3.5,c:"#bbddbb"},"[",{x:10.5,c:"#89b087"},"2"], [{y:-0.875,x:2.5,c:"#bbddbb"},"^",{x:1},"]",{x:8.5,c:"#89b087"},"1",{x:1},"3"], [{y:-0.875,x:5.5,c:"#bbddbb"},"~",{x:6.5},"\\"], -[{y:-0.875,c:"#2277ff",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb"},"%",{x:14.5,c:"#89b087"},"-",{c:"#2277ff",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#77aaff"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},".\n\n\nOption"], -[{y:-0.875,x:2.5,c:"#77aaff"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0\n\n\nCmd",{x:1},"=\n\n\nHyper"], -[{y:-0.75,x:0.5,c:"#77aaff"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+\n\n\nMeh","Enter\n\n\nCtrl"], -[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#54d6de"},"Left","Right"], +[{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#dddd77",t:"#000000"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},"."], +[{y:-0.875,x:2.5,c:"#dddd77"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0",{x:1},"="], +[{y:-0.75,x:0.5,c:"#dddd77"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+","Enter"], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Left","Right"], [{h:2},"Space",{h:2},"Enter","Up"], [{x:2},"Down"], [{r:-30,rx:13,y:-1,x:-3},"Home","End"], diff --git a/keyboards/ergodox/keymaps/ordinary/readme.md b/keyboards/ergodox/keymaps/ordinary/readme.md index 6465cd79e0..820b80b454 100644 --- a/keyboards/ergodox/keymaps/ordinary/readme.md +++ b/keyboards/ergodox/keymaps/ordinary/readme.md @@ -10,66 +10,51 @@ no rights reserved, use for any purposes, credit me if you are a nice person ## The Base Layout ## -* The light blue keys are modifiers: traditional Control, Option, and Command keys, plus Hyper and Meh -* The dark blue keys are Shift keys: Capitals Shift (traditional shift), Symbol Shift, and Media Shift; plus a Shift Lock key -* Several dark blue keys double for entry of characters which would typically be in those locations -* The turquoise keys are text navigation and manipulation -* The red keys is Escape and it is always found in that location no matter what +* *White Keys* are all the normal characters and symbols in all the normal locations (except for the brackets). +* *Modifier Keys* are light yellow and in the traditional location: Control, Option, Command, plus Hyper and Meh. +* *Shift Keys* are dark yellow, found on the outsides of the keyboard. Capitals Shift (traditional shift) is found in the usual place and above that is found Symbol Shift, Media Shift, and Special Shift (Shift Lock). +* Several of the shift keys double for entry of characters which would typically be in those locations. +* *Thumb Keys* shown in orange are for text navigation and manipulation. +* *Escape* is red and it is always found in that location no matter what.  -This layout puts the modifier keys along the bottom of the keyboard where they are on most keyboards. They are in the regular order, with the addition of Hyper and Meh keys. The modifier keys are all in the same place on all layers, although some layers also assign symbols on those buttons. On the outside edges are the Shift keys. The traditional shift key is called Capitals Shift and it is in the normal location. Above that are Symbols Shift and Media Shift. Each Shift key momentarily switches the layout to that layer, and if you use the Shift Lock button you can lock the layout to that layer. - -Touch typists will also find tilde, tab, equals/plus, slash/pipe, and quote/double-quote sharing space on those Shift keys where they would probably be on a common keyboard. Other than the turquoise keys the only buttons which move to new locations are the Brackets and Dash and Escape. Most touch typists dont touch-type brackets or dash anyway so only Escape really requires retraining of muscle memory, and see below for the Special Escape Sequence. - -The four big turquoise keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another. +The four big orange keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another. The Forward Tab and Backward Tab keys are in their locations mostly because I ended up with two extra buttons and needed something to do with them. My muscle memory from using the Truly Ergonomic Keyboard makes me look for the Tab key with my right index finger, so it is handy to have this redundant Tab, and the idea with the Backward Tab key is that it becomes easy to navigate text fields in forms, or to indent/unindent code. ## The Symbols Layer ## -* The light green keys are the eponymous symbols -* The bright green keys are F-Keys -* The dark green keys constitute a number pad -* The turquoise keys are the *reverse* of the turquoise keys on the base layer +* *Symbols* shown in light green. All kinds of brackets are available on this layer. Ampersand and Pipe justapose each other. Pipe, slash, and backslash are arranged in a column. +* *F-Keys* are bright green and overlay the row of numerals. +* *Number pad* in dark green under the right hand includes all four arithmetic operations in the same order found on most number pads and features an Enter key. The keycodes emitted here are normal numeric keycodes, not the number-pad specific keycodes emitted by most number pads so that NumLock is not needed. +* *Thumb keys* on this layer are the *reverse* of the orange keys on the base layer, with the keys either mirrored or shifted. This is powerful! Often I find myself using the mouse with my right hand, and the left hand needs to press Enter. Instead of reaching the left hand over to the right side of the keyboard, now I simply tap Symbols to reverse the turquoise keys, and Enter is right where it should be.  -The Ergodox EZ ships with the "Coder Layer" which I like to call the Symbols layer. There are some significant improvements in The Ordinary Layout over the default layout. - -The symbol keys are mostly the same as on the default layout, which did a good job in this regard, but with a few enhancements: - -* Angle brackets on this layer mean that curly, square, and angle brackets are all available on different layers of the same two buttons. Also, they mean that all kinds of brackets, including parentheses, are available on both the Base and Symbols layers. -* The slash, backslash, and pipe characters are grouped together as a memory aid. -* The & and | symbols are juxtaposed as a memory aid - -The number pad area here, in green, includes all four arithmetic operations in the same order found on most number pads and features an Enter key. The keycodes emitted here are normal numeric keycodes, not the number-pad specific keycodes emitted by most number pads, because this layout does not use a Num Lock key to switch the buttons between numeric keycodes and navigational keycodes. See the explanation in The Media Layout section about navigation using these same buttons. - -Finally, consider the turquoise text-nav keys. Here in the Symbols layer, these are *reversed* from the base layer, with the keys either mirrored or shifted. This is powerful! Often I find myself using the mouse with my right hand, and the left hand needs to press Enter. Instead of reaching the left hand over to the right side of the keyboard, now I simply tap Symbols to reverse the turquoise keys, and Enter is right where it should be. +The Symbols Layer is based on the Coder Layer from the default Ergodox EZ layout. I slightly rearranged the symbols, added some symbols, expanded the number pad, and straightened out the F-Keys. It's very handy to have the symbols directly underneath the normal typing keys. ## The Media Layer ## -* The dark orange keys on the left move the mouse cursor -* The dark orange keys on the right move the text cursor -* The light orange keys are for scrolling and paging -* The bright green keys are more F-keys -* The dark yellow keys signal Web and Audio applications -* The light yellow keys signal the operating system +* *Mouse Cursor Keys* are under the left hand, shown in dark blue. Diagonal keys won't automatically repeat unless combined with other keys. Buttons to left- middle- and right-click the mouse are also featured. +* *Text Cursor Keys* are under the right hand, shown in dark blue. They overlay the numberpad from the Symbols Layer, such that in the Media Layer the same keys can be used as if they were a number pad in navigational mode (Num Lock off). For instance, in traditional number pads the '3' key became 'Page Down', and so it is here. This means a user can do text navigation without moving either hand. +* *Scrolling and Paging* keys are shown in light blue and have some useful redundancy across the layout. +* Higher-order *F-Keys* are shown in bright green overylaying the numerals. +* *Application Keys* to control web browsers and audio players are dark purple but don't get too excited because these have weak support on operating systems I've looked at. Good luck. +* The light purple keys are various operating system keys such as NumLock and Mute and a button to navigate to My Computer (usually your home dir). * The dark gray keys do nothing in case you bump them by accident  -This layer was inspired by the Media layer on the Ergodox EZ but takes it farther. The Fingerworks TouchStream keyboard had a very useful feature for controlling the text cursor easily and this layer does something similar. The left hand can move the mouse, the right hand moves the text cursor, in all four directions, in small or large increments. This greatly enhances navigation in text documents. +This layer is a substantial extension of the Media layer on the Ergodox EZ default layout. The Fingerworks TouchStream keyboard had a very useful feature for controlling the text cursor easily and this layer does something similar. The left hand can move the mouse, the right hand moves the text cursor, in all four directions, in small or large increments. This greatly enhances navigation in text documents. -Moreover, the orange keys on the right overlay the numberpad from the Symbols Layer, such that in the Media Layer the same keys can be used as if they were a number pad in navigational mode (Num Lock off). For instance, in traditional number pads the '3' key became 'Page Down', and so it is here. This means a user can do text navigation without moving either hand. - -Alas, the yellow keys have at best spotty success with common software. Good luck with those but don't expect too much. +Keys to directly interact with the operating system are also found on this layer, such as volume and shutdown. ## Switching Between Layers ## In addition to Symbols and Media there is the Capitals layer which is exactly the same as pressing the shift key. Each layer is accessed by a shift key on each edge of the keyboard and corresponds to one of the three LEDs on the keyboard: Capitals (red), Symbols (green), Media (blue). The color of a layer illuminates when the layer is active. -Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. If you press both of a pair of shift keys, the layer will lock on until you press both shift keys again. For instance, the widely and rightly loathed Caps Lock is engaged by pressing both Capitals Shift buttons. All the Shift keys work this way. +Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. Lock the shift keys using the Shift Lock button, which is the same as the Special Shift button. Multiple layers can be turned on at once. The Capitals layer will affect characters on other layers to capitalize. Other layers, however, don't 'mix': Symbols blankets the base layout; Media blankets Symbols. @@ -77,27 +62,29 @@ Multiple layers can be turned on at once. The Capitals layer will affect charact  +The Special Shift layer is mostly used to lock the shift keys but in order to make this layout more _ordinary_ there are a few special sequences which put some keys near their most common traditional locations. + ### Escape ### -The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, whnich is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape. +The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, which is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape. The Ordinary layout offers as a consolation prize a Special sequence for Escape: Special Shift + 1. This is natural so you can tap the top left button, then the button next to it and get Escape. This gesture works in all layers. ### Backspace ### -At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence, using the 0 key, to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times. +At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence using the 0 key to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times. -### RShift ### +### Other Characters ### -The Ordinary Layout locks layers by pressing both of a pair of shift keys. This interferes with the QMK firmware magic sequence, which is LShift+RShift. To work around this, both of the Capitals Shift keys produce a *Left Shift* keystroke. If for some reason a person needs *Right Shift* they can find it by pressing a Special Shift key, then the Capitals Shift key on the right side of the keyboard. +The Escape and Backspace special sequences are so useful why not have a few more? You can find dash under 9, left bracket under o, and right bracket under p. That's pretty much all the characters from the top right corner of the keyboard which moved to make room for the columnar layout. **** -The Ordinary Layout for the Ergodox EZ keyboard, v4 +The Ordinary Layout for the Ergodox EZ keyboard, v4.20 Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com No rights reserved. This software is in the public domain. Credit me if you are friendly but if you're a jerk don't bother. Details: readme.md - https://github.com/nrrkeene/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/ordinary + https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c index 24d0c4ecb7..2c64304404 100644 --- a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c @@ -6,23 +6,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = KEYMAP( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5, - KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_BSLS, - CTL_T(KC_ESC), KC_A, KC_S, KC_E, KC_T, KC_G, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, - KC_F1, KC_F2, KC_F3, KC_F4, KC_LGUI, - /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE, - /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU, - /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_LALT, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5, + KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_BSLS, + KC_LCTRL, KC_A, KC_S, KC_E, KC_T, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_LGUI, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_LALT, // - /*-*/ KC_F6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, - /*-*/ KC_NO, KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS, - /*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT, - /*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - /*-*/ /*-*/ /*-*/ KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, - KC_MPLY, KC_MNXT, + /*-*/ KC_F6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + /*-*/ KC_NO, KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS, + /*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT, + /*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + /*-*/ /*-*/ /*-*/ KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, + KC_MPLY, KC_MNXT, KC_MPRV, - KC_RALT, KC_QUOT, KC_SPC + KC_RALT, KC_QUOT, KC_SPC ) }; diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md index 80475ab21e..4fa1814fb1 100644 --- a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md @@ -1,28 +1,41 @@ # Roman's Layout -There is only one layer based on [Norman layout](https://normanlayout.info/). +There is only one layer, and it is based on [Norman +layout](https://normanlayout.info/). Looking for multiple-layer layouts? -- [Symbols, arrows, plover, HJKL arrows](../romanzolotarev-norman-plover-osx-hjkl/) +- [Symbols, arrows, plover, HJKL + arrows](../romanzolotarev-norman-plover-osx-hjkl/) - [Same with IJKL arrows](../romanzolotarev-norman-plover-osx/) [](http://www.keyboard-layout-editor.com/#/gists/9e89d54f1ea6eeeb7dab1b2d19d28195) -## Functional Keys +## How to use Vim key -- Tap `F1` to mute microphone via [Shush](http://mizage.com/shush/). -- Tap `F2` to copy screenshot to the clipboard. -- Hold `SHIFT` and tap `F2` to save screenshot as a file. -- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/). - -## CTRL/ESC - -CTRL and ESC are frequently used in Vim. +It is `CTL_T(KC_ESC)` and it works this way: - Tap `CTRL/ESC` to send `ESC`. - Hold `CTRL/ESC` to use as `CTRL`. -## Activate N-rollover +## How to activate N-rollover + +- Hold left `SHIFT` and right `SHIFT` and then tap `N`. + +## How to make and flash on OS X + +First you need to install few brew packages. + +```bash +brew tap osx-cross/avr +brew install dfu-programmer avr-libc teensy_loader_cli +``` + +Then you can clone this repository, make and flash your ErgoDox. -- Hold left `SHIFT` and right `SHIRT` and then tap `N`. +```bash +git clone https://github.com/romanzolotarev/qmk_firmware +cd qmk_firmware/keyboards/ergodox +# Optionally tweak ./keymaps/romanzolotarev-norman-osx/keymap.c +SLEEP_LED_ENABLED=no KEYMAP=romanzolotarev-norman-osx make teensy +``` diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..08ee5aeda5 --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/keymap.c @@ -0,0 +1,312 @@ +/* + * About this keymap: + * + * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak + * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner + * keys. I've decided to continue using this layout with my ErgoDox. + * + * The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional + * keys as shown in the diagrams. The Colemak layout is merely an adaptation of that. + * + * I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck + * layouts. + * + */ + +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _DV 0 // Dvorak layer +#define _QW 1 // Qwerty layer +#define _CM 2 // Colemak layer +#define _MD 3 // Media Layer +#define _KP 4 // Keypad Layer + +// Macro name shortcuts +#define DVORAK M(_DV) +#define QWERTY M(_QW) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Layer 0 : Dvorak + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | ' | , | . | P | Y | | | | F | G | C | R | L | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | ; | Q | J | K | X | | | | B | M | W | V | Z | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCTL | LALT | | RALT | RCTL | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + * + */ +[_DV] = KEYMAP( + // left hand + KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, XXXXXXX, + KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, MO(_MD), + KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, + XXXXXXX, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, + KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + MO(_KP), KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, + KC_UP, KC_DOWN, KC_SLSH, KC_EQL, KC_RGUI, + KC_RALT, KC_RCTL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC + ), + + +/* Layer 1: QWERTY + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCTL | LALT | | RALT | RCTL | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + */ +[_QW] = KEYMAP( + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, XXXXXXX, + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(_MD), + KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + XXXXXXX, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + MO(_KP), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, KC_RGUI, + KC_LALT, KC_LCTL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC + ), + + +/* Layer 2 : Colemak + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCTL | LALT | | RALT | RCTL | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + */ +[_CM] = KEYMAP( + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_F, KC_P, KC_G, XXXXXXX, + KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(_MD), + KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + XXXXXXX, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, + KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + MO(_KP), KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, KC_RGUI, + KC_LALT, KC_LCTL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC + ), + + +/* Layer 3 : Media layer + * ,--------------------------------------------------. ,--------------------------------------------------. + * | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | PrSc | ScLk | Paus | | | | | | Mute | Vol- | Vol+ | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| Stop | Prev | Play | Next | Sel | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |Dvorak|Qwerty|Colemk| | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[_MD] = KEYMAP( + // left hand + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, + _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, DVORAK, QWERTY, COLEMAK, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______, + // right hand + KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, + _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, + KC_MSTP, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSEL, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______ + ), + + +/* Layer 4 : Keypad layer + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Power | | | | | | | | | | NmLk | KP = | KP / | KP * | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Sleep | | | | | | | | | | KP 7 | KP 8 | KP 9 | KP - | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | KP 0 | | KP . |KP Ent| | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[_KP] = KEYMAP( + // left hand + KC_PWR, _______, _______, _______, _______, _______, _______, + KC_SLEP, _______, _______, _______, _______, _______, _______, + KC_WAKE, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______, + // right hand + _______, _______, KC_NLCK, KC_PEQL, KC_PSLS, KC_PAST, _______, + _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, _______, + _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______, + _______, _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______, + KC_P0, _______, KC_PDOT, KC_PENT, _______, + _______, _______, + _______, + _______, _______, _______ + ), + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md new file mode 100644 index 0000000000..6ecdabc9ed --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -0,0 +1,122 @@ +# Xyverz's ErgoDox EZ Keymap + +## About this keymap: + +The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner keys. I've decided to continue using this layout with my ErgoDox. + +The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional keys as shown in the diagrams. The Colemak layout is merely an adaptation of that. + +I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts. + +## Still to do: + + * Need to figure out a better position for the ESC key. + * Come up with a function for the empty keys shown in the alpha layers below. + * Fix the CapsLock, NumLock, and ScrLck LEDs. + +### Layer 0: Dvorak layer + + ,--------------------------------------------------.,--------------------------------------------------. + | ] | 1 | 2 | 3 | 4 | 5 | ESC || ESC | 6 | 7 | 8 | 9 | 0 | [ | + |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| + | Tab | ' | , | . | Y | Y | || | F | G | C | R | L | \ | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | CapsLk | A | O | E | U | I |------||------| D | H | T | N | S | - | + |--------+------+------+------+------+------| _MD || _KP |------+------+------+------+------+--------| + | LShift | Z | X | C | V | X | || | B | M | W | V | Z | RShift | + `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + `----------------------------------' `----------------------------------' + ,-------------.,-------------. + | LCtr | LAlt || Ralt | RCtr | + ,------|------|------||------+------+------. + | | | Home || PgUp | | | + | BkSp | Del |------||------| Enter| Space| + | | | End || PgDn | | | + `--------------------'`--------------------' + +### Layer 1: QWERTY layer + + ,--------------------------------------------------.,--------------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 | ESC || ESC | 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| + | Tab | Q | W | E | R | T | || | Y | U | I | O | P | \ | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | CapsLk | A | S | D | F | G |------||------| H | J | K | L | ; | ' | + |--------+------+------+------+------+------| _MD || _KP |------+------+------+------+------+--------| + | LShift | Z | X | C | V | B | || | N | M | , | . | / | RShift | + `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + `----------------------------------' `----------------------------------' + ,-------------.,-------------. + | LCtr | LAlt || Ralt | RCtr | + ,------|------|------||------+------+------. + | | | Home || PgUp | | | + | BkSp | Del |------||------| Enter| Space| + | | | End || PgDn | | | + `--------------------'`--------------------' + +### Keymap 2: Colemak layer + + ,--------------------------------------------------.,--------------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 | ESC || ESC | 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| + | Tab | Q | W | F | P | G | || | J | L | U | Y | ; | \ | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | BkSpc | A | R | S | T | D |------||------| H | N | E | I | O | ' | + |--------+------+------+------+------+------| _MD || _KP |------+------+------+------+------+--------| + | LShift | Z | X | C | V | B | || | K | M | , | . | / | RShift | + `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' + | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + `----------------------------------' `----------------------------------' + ,-------------.,-------------. + | LCtr | LAlt || Ralt | RCtr | + ,------|------|------||------+------+------. + | | | Home || PgUp | | | + | BkSp | Del |------||------| Enter| Space| + | | | End || PgDn | | | + `--------------------'`--------------------' + +### layer 3 : Media layer + + ,--------------------------------------------------.,--------------------------------------------------. + | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 || F12 | F6 | F7 | F8 | F9 | F10 | | + |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| + | | | PrSc | ScLk | Paus | | || | | Mute | Vol- | Vol+ | | | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | | | | | | |------||------| Stop | Prev | Play | Next | Sel | | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | | |Dvorak|Qwerty|Colemk| | || | | | | | | | + `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' + | | | | | | | | | | | | + `----------------------------------' `----------------------------------' + ,-------------.,-------------. + | | || | | + ,------|------|------||------+------+------. + | | | || | | | + | | |------||------| | | + | | | || | | | + `--------------------'`--------------------' + + + +### Keymap 4: Keypad layer + + ,--------------------------------------------------.,--------------------------------------------------. + | Power | | | | | | || | | NmLk | KP = | KP / | KP * | | + |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| + | Sleep | | | | | | || | | KP 7 | KP 8 | KP 9 | KP - | | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | Wake | | | | | |------||------| | KP 4 | KP 5 | KP 6 | KP + | | + |--------+------+------+------+------+------| || |------+------+------+------+------+--------| + | | | | | | | || | | KP 1 | KP 2 | KP 3 |KP Ent| | + `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' + | | | | | | | KP 0 | | KP . |KP Ent| | + `----------------------------------' `----------------------------------' + ,-------------.,-------------. + | | || | | + ,------|------|------||------+------+------. + | | | || | | | + | | |------||------| | | + | | | || | | | + `--------------------'`--------------------' diff --git a/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf b/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf new file mode 100644 index 0000000000..ce4fce3b1d --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/90-ergodox-yoruian.conf @@ -0,0 +1,6 @@ +Section "InputClass" + Identifier "ErgoDox EZ" + MatchIsKeyboard "on" + MatchProduct "ErgoDox EZ ErgoDox EZ" + Option "XkbLayout" "ergodox_yoruian" +EndSection diff --git a/keyboards/ergodox/keymaps/yoruian/Makefile b/keyboards/ergodox/keymaps/yoruian/Makefile new file mode 100644 index 0000000000..b43a24c611 --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/Makefile @@ -0,0 +1,13 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +install-xorg-configuration: + install -m 0664 90-$(KEYBOARD)-$(KEYMAP).conf \ + /etc/X11/xorg.conf.d/90-$(KEYBOARD)-$(KEYMAP).conf + install -m 0644 $(KEYBOARD)_$(KEYMAP) \ + /usr/share/X11/xkb/symbols/$(KEYBOARD)_$(KEYMAP) + +uninstall-xorg-configuration: + -rm -f /etc/X11/xorg.conf.d/90-$(KEYBOARD)-$(KEYMAP).conf + -rm -f /usr/share/X11/xkb/symbols/$(KEYBOARD)_$(KEYMAP) diff --git a/keyboards/ergodox/keymaps/yoruian/README b/keyboards/ergodox/keymaps/yoruian/README new file mode 100644 index 0000000000..99b41434ef --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/README @@ -0,0 +1,102 @@ + Snarfangel's YORUIAN for the ErgoDox EZ + ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ +DEFAULT +â”â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┓ â”â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┓ +┃ ` │ ; │ : │ - │ / │ ( │ < ┃ ┃ > │ ) │ ^ │ * │ ~ │ Γ │ σ ┃ +┠───┼───┼───┼───┼───┼───┼───┨ ┠───┼───┼───┼───┼───┼───┼───┨ +┃ ⎋ │ . │ y │ o │ r │ ? │ ✦ ┃ ┃ ✦ │ j │ v │ d │ f │ w │ q ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ ⎈ │ u │ i │ a │ n │ ! ├───┨ ┠───┤ m │ h │ t │ s │ c │ ⎈ ┃ +┠───┼───┼───┼───┼───┼───┤ ■┃ ┃ ■├───┼───┼───┼───┼───┼───┨ +┃ λ │ ' │ " │ , │ _ │ = │ ┃ ┃ │ k │ l │ p │ g │ b │ x ┃ +┠───┼───┼───┼───┼───╆â”â”â”â”·â”â”â”â”› â”—â”â”â”â”·â”â”â”╅───┼───┼───┼───┼───┨ +┃ ⎀ │ E │ │ │ â—† ┃ ┃ â—† │ │ │ z │ ⎙ ┃ +â”—â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”› â”—â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”› + â”â”â”â”┯â”â”â”┓ â”â”â”â”┯â”â”â”┓ + ┃ ⌫ │ ⌥ ┃ ┃ ⎄ │ ↹ ┃ + â”â”â”â”╃───┼───┨ ┠───┼───╄â”â”â”┓ + ┃ │ │ ┃ ┃ │ │ ┃ + ┃ e │ ⇧ ├───┨ ┠───┤ ⎠│ ⣠┃ + ┃ │ │ ┃ ┃ │ │ ┃ + â”—â”â”â”â”·â”â”â”â”·â”â”â”â”› â”—â”â”â”â”·â”â”â”â”·â”â”â”â”› +SHIFTED +â”â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┓ â”â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┓ +┃ 9 │ 7 │ 5 │ 3 │ 1 │ [ │ { ┃ ┃ } │ ] │ 0 │ 2 │ 4 │ 6 │ 8 ┃ +┠───┼───┼───┼───┼───┼───┼───┨ ┠───┼───┼───┼───┼───┼───┼───┨ +┃ │ * │ Y │ O │ R │ \ │ ┃ ┃ │ J │ V │ D │ F │ W │ Q ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ │ U │ I │ A │ N │ | ├───┨ ┠───┤ M │ H │ T │ S │ C │ ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ │ # │ $ │ @ │ & │ + │ ┃ ┃ │ K │ L │ P │ G │ B │ X ┃ +┠───┼───┼───┼───┼───╆â”â”â”â”·â”â”â”â”› â”—â”â”â”â”·â”â”â”╅───┼───┼───┼───┼───┨ +┃ │ │ │ │ ┃ ┃ │ │ │ Z │ ┃ +â”—â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”› â”—â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”› + â”â”â”â”┯â”â”â”┓ â”â”â”â”┯â”â”â”┓ + ┃ │ ┃ ┃ │ ┃ + â”â”â”â”╃───┼───┨ ┠───┼───╄â”â”â”┓ + ┃ │ │ ┃ ┃ │ │ ┃ + ┃ │ ├───┨ ┠───┤ │ ┃ + ┃ │ │ ┃ ┃ │ │ ┃ + â”—â”â”â”â”·â”â”â”â”·â”â”â”â”› â”—â”â”â”â”·â”â”â”â”·â”â”â”â”› +λ LAYER +â”â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┓ â”â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┯â”â”â”┓ +┃ │ │ │ │ │ │ ┃ ┃ │ │ ⑤ │ â‘¥ │ ⑦ │ ⑧ │ ⑨ ┃ +┠───┼───┼───┼───┼───┼───┼───┨ ┠───┼───┼───┼───┼───┼───┼───┨ +┃ │ │ │ │ │ │ ┃ ┃ │ │ ①│ â‘¡ │ â‘¢ │ â‘£ │ â‘© ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ │ │ │ │ │ ├───┨ ┠───┤ ⎉ │ ↠│ ↓ │ ↑ │ → │ ⑪ ┃ +┠───┼───┼───┼───┼───┼───┤ ┃ ┃ ├───┼───┼───┼───┼───┼───┨ +┃ λ │ │ │ │ │ │ ┃ ┃ │ │ ⇱ │ ⎘ │ ⎗ │ ⇲ │ â‘« ┃ +┠───┼───┼───┼───┼───╆â”â”â”â”·â”â”â”â”› â”—â”â”â”â”·â”â”â”╅───┼───┼───┼───┼───┨ +┃ │ │ │ │ ┃ ┃ │ │ │ │ ┃ +â”—â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”› â”—â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”·â”â”â”â”› + â”â”â”â”┯â”â”â”┓ â”â”â”â”┯â”â”â”┓ + ┃ │ ┃ ┃ │ ┃ + â”â”â”â”╃───┼───┨ ┠───┼───╄â”â”â”┓ + ┃ │ │ ┃ ┃ │ │ ┃ + ┃ │ ├───┨ ┠───┤ │ ┃ + ┃ │ │ ┃ ┃ │ │ ┃ + â”—â”â”â”â”·â”â”â”â”·â”â”â”â”› â”—â”â”â”â”·â”â”â”â”·â”â”â”â”› + +Installation (X only) +‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ + 1. Build and flash firmware as usual + + 2. sudo make install-xorg-configuration + + 3. Restart X + +Features +‾‾‾‾‾‾‾‾ + • E on the thumb + + • Emacs-friendly + + • Symmetric control keys for finger wear levelling + + • Greek and subscript dead keys + + • Compose key for arbitrary Unicode input via ~/.XCompose + +Don't Cares +‾‾‾‾‾‾‾‾‾‾‾ + • Easy migration from QWERTY + + • Compatbility with non-XKB systems + + • Mouse emulation + + • Media keys + +Acknowledgements +‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ +Snarfangel, for designing the layout. + +The GNU FreeFont project and Steve White, for adding new keyboard +symbols. + +Xah Lee, for http://xahlee.info/comp/unicode_computing_symbols.html + +Colophon +‾‾‾‾‾‾‾‾ +This file is best-viewed with an SVN version of GNU FreeFont Mono. diff --git a/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian b/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian new file mode 100644 index 0000000000..0d13fbfd4c --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/ergodox_yoruian @@ -0,0 +1,34 @@ +partial alphanumeric_keys modifier_keys +xkb_symbols "ergodox_yoruian" { + include "us" + name[Group1]= "English (yoruian-1.0.0)"; + + replace key <KP2> { [ Multi_key, Multi_key ] }; + replace key <KP3> { [ Hyper_L, Hyper_L ] }; + replace key <AE09> { [ grave, 9 ] }; + replace key <AE07> { [ semicolon, 7 ] }; + replace key <AE05> { [ colon, 5 ] }; + replace key <AE03> { [ minus, 3 ] }; + replace key <AE01> { [ slash, 1 ] }; + replace key <AE10> { [ asciicircum, 0 ] }; + replace key <AE02> { [ percent, 2 ] }; + replace key <AE04> { [ asciitilde, 4 ] }; + replace key <AE06> { [ dead_greek, 6 ] }; + replace key <AE08> { [ dead_caron, 8 ] }; + replace key <KP1> { [ E, E ] }; + replace key <AD12> { [ period, asterisk ] }; + replace key <BKSL> { [ question, backslash ] }; + replace key <AC10> { [ exclam, bar ] }; + replace key <AC11> { [ apostrophe, numbersign ] }; + replace key <AB08> { [ quotedbl, dollar ] }; + replace key <AB09> { [ comma, at ] }; + replace key <AB10> { [ underscore, ampersand ] }; + replace key <KP0> { [ equal, plus ] }; + replace key <TLDE> { [ parenleft, bracketleft ] }; + replace key <AE11> { [ less, braceleft ] }; + replace key <AE12> { [ greater, braceright ] }; + replace key <AD11> { [ parenright, bracketright ] }; + + modifier_map none { <HYPR> }; + modifier_map Mod3 { <KP3> }; +}; diff --git a/keyboards/ergodox/keymaps/yoruian/keymap.c b/keyboards/ergodox/keymaps/yoruian/keymap.c new file mode 100644 index 0000000000..d3635ddf3f --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/keymap.c @@ -0,0 +1,61 @@ +/* + * Copyright 2016 Thomas Fitzsimmons <fitzsim@fitzsim.org> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "yoruian.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP\ +(9, 7, 5, 3, 1, GRV, MINS, EQL, LBRC, 0, 2, 4, 6, 8, + ES, RBRC, Y, O, R, BSLS, P3, P3, J, V, D, F, W, Q, + LC, U, I, A, N, SCLN, M, H, T, S, C, RC, + FF, QUOT, COMM, DOT, SLSH, P0, LGUI, LGUI, K, L, P, G, B, X, + IN, P1, NO, NO, LALT, LALT, NO, NO, Z, PS, + BSPC, RALT, P2, TAB, + NO, NO, + E, LSFT, NO, NO, ENT, SPC), +[1] = KEYMAP\ +(TR, TR, TR, TR, TR, TR, TR, TR, TR, F5, F6, F7, F8, F9, + TR, TR, TR, TR, TR, TR, TR, TR, TR, F1, F2, F3, F4, FT, + TR, TR, TR, TR, TR, TR, PAUS, LEFT, DOWN, UP, RGHT, FE, + TR, TR, TR, TR, TR, TR, TR, TR, TR, HOME, PGDN, PGUP, END, FW, + TR, TR, TR, TR, TR, TR, TR, TR, TR, TR, + TR, TR, TR, TR, + TR, TR, + TR, TR, TR, TR, TR, TR), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + return MACRO_NONE; +}; + +void matrix_init_user(void) { +}; + +void matrix_scan_user(void) { + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); +}; + +/* + * Local Variables: + * electric-indent-mode: nil + * End: + */ diff --git a/keyboards/ergodox/keymaps/yoruian/yoruian.h b/keyboards/ergodox/keymaps/yoruian/yoruian.h new file mode 100644 index 0000000000..1adcb7fd3f --- /dev/null +++ b/keyboards/ergodox/keymaps/yoruian/yoruian.h @@ -0,0 +1,61 @@ +/* + * Copyright 2016 Thomas Fitzsimmons <fitzsim@fitzsim.org> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#undef KEYMAP +#define KEYMAP\ +( \ + /* Spacial positions. */ \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ + k20, k21, k22, k23, k24, k25, k28, k29, k2A, k2B, k2C, k2D, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ + k40, k41, k42, k43, k44, k49, k4A, k4B, k4C, k4D, \ + k55, k56, k57, k58, \ + k54, k59, \ + k53, k52, k51, k5C, k5B, k5A) \ + \ + /* Matrix positions. */ \ + { \ + { KC_##k00, KC_##k10, KC_##k20, KC_##k30, KC_##k40, KC_NO }, \ + { KC_##k01, KC_##k11, KC_##k21, KC_##k31, KC_##k41, KC_##k51 }, \ + { KC_##k02, KC_##k12, KC_##k22, KC_##k32, KC_##k42, KC_##k52 }, \ + { KC_##k03, KC_##k13, KC_##k23, KC_##k33, KC_##k43, KC_##k53 }, \ + { KC_##k04, KC_##k14, KC_##k24, KC_##k34, KC_##k44, KC_##k54 }, \ + { KC_##k05, KC_##k15, KC_##k25, KC_##k35, KC_NO, KC_##k55 }, \ + { KC_##k06, KC_##k16, KC_NO, KC_##k36, KC_NO, KC_##k56 }, \ + { KC_##k07, KC_##k17, KC_NO, KC_##k37, KC_NO, KC_##k57 }, \ + { KC_##k08, KC_##k18, KC_##k28, KC_##k38, KC_NO, KC_##k58 }, \ + { KC_##k09, KC_##k19, KC_##k29, KC_##k39, KC_##k49, KC_##k59 }, \ + { KC_##k0A, KC_##k1A, KC_##k2A, KC_##k3A, KC_##k4A, KC_##k5A }, \ + { KC_##k0B, KC_##k1B, KC_##k2B, KC_##k3B, KC_##k4B, KC_##k5B }, \ + { KC_##k0C, KC_##k1C, KC_##k2C, KC_##k3C, KC_##k4C, KC_##k5C }, \ + { KC_##k0D, KC_##k1D, KC_##k2D, KC_##k3D, KC_##k4D, KC_NO } \ + } + +#define KC_ES KC_ESC +#define KC_LC KC_LCTL +#define KC_RC KC_RCTL +#define KC_FF MO(1) +#define KC_IN KC_INS +#define KC_PS KC_PSCR +#define KC_TR KC_TRNS +#define KC_FT KC_F10 +#define KC_FE KC_F11 +#define KC_FW KC_F12 diff --git a/keyboards/ergodox/keymaps/zweihander-osx/makefile.mk b/keyboards/ergodox/keymaps/zweihander-osx/Makefile index 6e3d088a43..6e3d088a43 100644 --- a/keyboards/ergodox/keymaps/zweihander-osx/makefile.mk +++ b/keyboards/ergodox/keymaps/zweihander-osx/Makefile diff --git a/keyboards/ergodox/keymaps/zweihander-osx/keymap.c b/keyboards/ergodox/keymaps/zweihander-osx/keymap.c index d6d66fd55d..725a73e346 100644 --- a/keyboards/ergodox/keymaps/zweihander-osx/keymap.c +++ b/keyboards/ergodox/keymaps/zweihander-osx/keymap.c @@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,------|------|------| |------+--------+------. * | | | PgUp | | PgDn | | | * | | ⇥ |------| |------| ⇥ |Enter | - * | | | L⌥ | | L⌃ | | | + * | | | R⌥ | | R⌃ | | | * `--------------------' `----------------------' */ // If it accepts an argument (i.e, is a function), it doesn't need KC_. @@ -46,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_LGUI,KC_LEFT,KC_RGHT, KC_GRV, KC_QUOT, KC_PGUP, - KC_SPC,KC_TAB ,KC_LALT, + KC_SPC,KC_TAB ,KC_RALT, // right hand TG(SYMB), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, MO(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, @@ -55,7 +55,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_SPC , KC_ESC, KC_BSPC, KC_PGDN, - KC_LCTL, KC_TAB, KC_ENT + KC_RCTL, KC_TAB, KC_ENT ), /* Keymap 1: Symbol Layer * @@ -102,13 +102,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 2: Media keys * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | F14 | F15 | | | | | | ⌘Q | ⌘W | ⌘⇧` | ⌘` | | | Power | + * | | F14 | F15 |PrtScr|SclLck| Pause| | | ⌘Q | ⌘W | ⌘⇧` | ⌘` | | | Power | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | | | | PgUp |⌘S⌘⇥⌘R| Term | | | | ⌘] | ⌥⌘↑ | ↑ | ⌥⌘↓ | | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | |Safari| PgDn | | |------| |------| ⌘[ | ↠| ↓ | → | | ⯠| * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | |BBEdit| | | |L⇧+Spc| Spc | â® | â | | | + * | | | | | |BBEdit| | | | | ⯠| â® | â | | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' * | | | | | | |VolUp |VolDn | Mute | | | * `----------------------------------' `----------------------------------' @@ -122,7 +122,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ // MEDIA AND MOUSE [MDIA] = KEYMAP( - KC_TRNS, KC_F14 , KC_F15 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, /* F14 dims screen, F15 brightens */ + KC_TRNS, KC_F14 , KC_F15 , KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, /* F14 dims screen, F15 brightens */ KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, M(SGWF), M(TMNL), KC_TRNS, KC_TRNS, KC_TRNS, M(SAFA), KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(BBED), KC_TRNS, @@ -134,7 +134,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LGUI(KC_Q), LGUI(KC_W), LGUI(LSFT(KC_GRV)), LGUI(KC_GRV), KC_TRNS, KC_TRNS, KC_PWR , KC_TRNS, LGUI(KC_RBRC), LGUI(LALT(KC_UP)), KC_UP , LGUI(LALT(KC_DOWN)), KC_TRNS, KC_TRNS, LGUI(KC_LBRC), KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_MPLY, - KC_TRNS, LSFT(KC_SPC), KC_SPC , KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END , diff --git a/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown b/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown index 3b7f52941a..5125a12ee1 100644 --- a/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown +++ b/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown @@ -7,7 +7,7 @@ This layout is tuned for people who… ## use OS X -This layout doesn’t make any concessions for Windows use. While it should work fine in Windows, I’m not about to devote precious keyboard space to Windows-specific shortcuts. +While this layout should work fine in Windows, it’s not tuned for it. No sane person who primarily uses Windows would put this many Windows keys on a keyboard layout. ## mouse left-handed while doing other things with the right hand @@ -21,8 +21,6 @@ I tend to have my mouse in my left hand, but I like to use my other hand to make - Go Up and Close Just-Left Folder (⌥⌘↑) - Cycle through open windows in current application (⌘\` and ⌘⇧\`) - Cycle through tabs in current window (⌥⇥ and ⌥⇧⇥) -- Space (page down in browsers; Quick Look in the Finder) -- Shift-Space (page up in web browsers) Because moving letter-by-letter is way slower than moving word-by-word, I added Option (⌥) to the bottommost button on the left side. This key can be held easily while holding ; (activate media layer) and pressing J and L to move left and right by word. @@ -34,11 +32,15 @@ I wanted to preserve the feel of a number of shortcuts that involve pressing lot - Empty Trash Without Asking for Confirmation (⇧⌥⌘⌫) - Shut Down Without Asking for Confirmation (⇧⌥⌘ power) +⇧⌥⌘⌫, when you press the backspace on the right half of the keyboard, is much more satisfying than if you curl your left hand into a claw to press all the keys on the left. Try both; you’ll agree. + ## use Emacs-style shortcuts I press C-a, C-e, and C-k all the time. It’s difficult to press these key combinations with the control key on the bottom left and I’m too quick on the draw for the control function on the / key to work reliably, so the bottommost thumb button on the right side is another control key. +Having trouble remembering which thumb key is alt and which is ctrl? It’s like on the lower right of a normal keyboard — leftmost is alt, rightmost is ctrl. + ## use spreadsheets diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index f81d7cd8df..3bbe98fd69 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,33 +1,137 @@ -# Getting started +# The Easy Way -There are two main ways you could customize the ErgoDox (EZ and Infinity) +If you can find firmware someone else has made that does what you want, that +is the easiest way to customize your ErgoDox. It requires no programming +experience or the setup of a build environment. -## The Easy Way: Use an existing firmware file and just flash it (ErgoDox EZ only) +Quickstart: -1. Download and install the [Teensy Loader](https://www.pjrc.com/teensy/loader.html). Some Linux distributions already provide a binary (may be called `teensy-loader-cli`), so you may prefer to use this. -2. Find a firmware file you like. There are [dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) you can browse and download. You can also use the [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) to create a firmware Hex file you like. -3. Download the firmware file -4. Connect the keyboard, press its Reset button (gently insert a paperclip into the hole in the top-right corner) and flash it using the Teensy loader you installed on step 1 and the firmware you downloaded. + - Find and download an existing firmware + [from Other Firmware Options](#other-firmware-options) -## More technical: compile an existing keymap, or create your own totally custom firmware by editing the source files. + - Then flash the firmware to your [ErgoDox Ez](#ergodox-ez) + or [ErgoDox Infinity](#ergodox-infinity) -This requires a little bit of familiarity with coding. -If you are just compiling an existing keymap and don't want to create your own, you can skip step 4, 5 and 8. +# Customizing Keymaps -1. Go to https://github.com/jackhumbert/qmk_firmware and read the readme at the base of this repository, top to bottom. Then come back here :) -2. Clone the repository (download it) -3. Set up a build environment as per the readme. -4. Copy `keyboards/ergodox/keymaps/default/keymap.c` into `keymaps/your_name/keymap.c` (for example, `keymaps/german/keymap.c`) -5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. See below for more tips on sharing your work. -6. Compile your firmware by running `make keymap=keymap_name`. For example, `make keymap=german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `subproject=infinity` to the make command. -7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make teensy keymap=keymap_name`. +There are many existing keymaps in the "keymaps" directory. If you just want +to use one of them, you don't need to modify keymaps and can just build and +flash the firmware as described below. These directories each have a +"readme.md" file which describe them. - **Infinity ErgoDox** - Flash the firmware by running `make dfu-util keymap=keymap_name subproject=infinity` -8. Submit your work as a pull request to this repository, so others can also use it. :) See below on specifics. +If none of the existing keymaps suit you, you can create your own custom +keymap. This will require some experience with coding. Follow these steps +to customize a keymap: -Good luck! :) + - Read the [qmk firmware README](https://github.com/jackhumbert/qmk_firmware) from top to bottom. Then come back here. :) -## Contributing your keymap + - Clone the qmk_firmware repository + + - Set up your build environment (see below). + + - Make a new directory under "keymaps" to hold your customizations. + + - Copy an existing keymap that is close to what you want, such as + "keymaps/default/keymap.c". + + - Use an editor to modify the new "keymap.c". See "Finding the keycodes you + need" below). Try to edit the comments as well, so the "text graphics" + represent your layout correctly. + + - Compile your new firmware (see below) + + - Flash your firmware (see below) + + - Test the changes. + + - Submit your keymap as a pull request to the qmk_firmware repository so + others can use it. You will want to add a "readme.md" that describes the + keymap. + +# Build Dependencies + +Before you can build, you will need the build dependencies. There is a script +to try to do this for Linux: + + - Run the `util/install_dependencies.sh` script as root. + +For the Infinity, you need the chibios submodules to be checked out or you +will receive errors about the build process being unable to find the chibios +files. Check them out with: + + - Go to the top level repo directory and run: `git submodule update --init --recursive` + +# Flashing Firmware + +## ErgoDox Ez + +The Ez uses the [Teensy Loader](https://www.pjrc.com/teensy/loader.html). + +Linux users need to modify udev rules as described on the Teensy Linux page. +Some distributions provide a binary, maybe called `teensy-loader-cli`). + +To flash the firmware: + + - Build the firmware with `make keymapname`, for example `make default` + - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g. + `ergodox_ez_default.hex` + + - Start the teensy loader. + + - Load the .hex file into it. + + - Press the Reset button by inserting a paperclip gently into the reset hole + in the top right corder. + + - Click the button in the Teensy app to download the firmware. + +## ErgoDox Infinity + +The Infinity is two completely independent keyboards, and needs to be flashed +for the left and right halves seperately. To flash them: + + - Build the firmware with `make infinity-keymapname` + + - Plug in the left hand keyboard only. + + - Press the program button (back of keyboard, above thumb pad). + + - Install the firmware with `sudo make infinity-keymapname-dfu-util` + + - Build left hand firmware with `make infinity-keymapname MASTER=right` + + - Plug in the right hand keyboard only. + + - Press the program button (back of keyboard, above thumb pad). + + - Install the firmware with `sudo make infinity-keymapname-dfu-util MASTER=right` + +More information on the Infinity firmware is available in the [TMK/chibios for +Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md) + +### Infinity Master/Two Halves + +The Infinity is two completely independent keyboards, that can connect together. +You have a few options in how you flash the firmware: + +- Flash the left half, rebuild the firmware with "MASTER=right" and then flash + the right half. This allows you to plug in either half directly to the + computer and is what the above instructions do. + +- Flash the left half, then flash the same firmware on the right. This only + works when the left half is plugged directly to the computer and the keymap + is mirrored. It saves the small extra step of rebuilding with + "MASTER=right". + +- The same as the previous one but with "MASTER=right" when you build the + firmware, then flash the same firmware to both halves. You just have to + directly connect the right half to the computer. + +- For minor changes such as changing only the keymap without having updated + any part of the firmware code itself, you can program only the MASTER half. + It is safest to program both halves though. + +# Contributing your keymap The QMK firmware is open-source, so it would be wonderful to have your contribution! Within a very short time after launching we already amassed dozens of user-contributed keymaps, with all sorts of creative improvements and tweaks. This is very valuable for people who aren't comfortable coding, but do want to customize their ErgoDox. To make it easy for these people to use your layout, I recommend submitting your PR in the following format. @@ -36,11 +140,26 @@ The QMK firmware is open-source, so it would be wonderful to have your contribut 3. `readme.md` - a readme file, which GitHub would display by default when people go to your directory. Explain what's different about your keymap, what you tweaked or how it works. No specific format to follow, just communicate what you did. :) 4. Any graphics you wish to add. This is absolutely not a must. If you feel like it, you can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to make something and grab a screenshot, but it's really not a must. If you do have graphics, your readme can just embed the graphic as a link, just like I did with the default layout. - -## Finding the keycodes you need +# Finding the keycodes you need Let's say you want a certain key in your layout to send a colon; to figure out what keycode to use to make it do that, you're going to need `quantum/keymap_common.h`. That file contains a big list of all of the special, fancy keys (like, being able to send % on its own and whatnot). If you want to send a plain vanilla key, you can look up its code under `doc/keycode.txt`. That's where all the boring keys hang out. + +# Other Firmware Options + +There are external tools for customizing the layout, but those do not use +the featurs of this qmk firmware. These sites include: + + - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez + - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files + +You can also find an existing firmware that you like, for example from: + + - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) + +This qmk firmware also provides the ability to customize keymaps, but requires +a toolchain to build the firmware. See below for instructions on building +firmware and customizing keymaps. diff --git a/keyboards/ergodox/rules.mk b/keyboards/ergodox/rules.mk new file mode 100644 index 0000000000..ac63d4eff2 --- /dev/null +++ b/keyboards/ergodox/rules.mk @@ -0,0 +1,28 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make = Make software. +# +# make clean = Clean out built project files. +# +# That's pretty much all you need. To compile, always go make clean, +# followed by make. +# +# For advanced users only: +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +#---------------------------------------------------------------------------- +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= yes # Unicode diff --git a/keyboards/gh60/Makefile b/keyboards/gh60/Makefile index 39a9cc0ae1..57b2ef62e5 100644 --- a/keyboards/gh60/Makefile +++ b/keyboards/gh60/Makefile @@ -1,74 +1,3 @@ -
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes # Console for debug(+400)
-# COMMAND_ENABLE ?= yes # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES # MIDI controls
-# UNICODE_ENABLE ?= YES # Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-ifndef QUANTUM_DIR
- include ../../Makefile
-endif
-
+ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/gh60/config.h b/keyboards/gh60/config.h index 4813c4e786..97753bc069 100644 --- a/keyboards/gh60/config.h +++ b/keyboards/gh60/config.h @@ -1,161 +1,161 @@ -/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER geekhack
-#define PRODUCT GH60
-#define DESCRIPTION t.m.k. keyboard firmware for GH60
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-// Rev A
-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
-// Rev B/C
- #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT GH60 +#define DESCRIPTION t.m.k. keyboard firmware for GH60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +// Rev A +// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } +// Rev B/C + #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/gh60/gh60.c b/keyboards/gh60/gh60.c index 255d87de99..f5a158e12f 100644 --- a/keyboards/gh60/gh60.c +++ b/keyboards/gh60/gh60.c @@ -1,25 +1,25 @@ -#include "gh60.h"
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- gh60_caps_led_on();
- } else {
- gh60_caps_led_off();
- }
-
- // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
- // gh60_esc_led_on();
- // } else {
- // gh60_esc_led_off();
- // }
-
- // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
- // gh60_fn_led_on();
- // } else {
- // gh60_fn_led_off();
- // }
-
- led_set_user(usb_led);
-}
+#include "gh60.h" + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + gh60_caps_led_on(); + } else { + gh60_caps_led_off(); + } + + // if (usb_led & (1<<USB_LED_NUM_LOCK)) { + // gh60_esc_led_on(); + // } else { + // gh60_esc_led_off(); + // } + + // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { + // gh60_fn_led_on(); + // } else { + // gh60_fn_led_off(); + // } + + led_set_user(usb_led); +} diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h index ca30562a44..82624b6148 100644 --- a/keyboards/gh60/gh60.h +++ b/keyboards/gh60/gh60.h @@ -1,74 +1,74 @@ -#ifndef GH60_H
-#define GH60_H
-
-#include "quantum.h"
-#include "led.h"
-
-/* GH60 LEDs
- * GPIO pads
- * 0 F7 WASD LEDs
- * 1 F6 ESC LED
- * 2 F5 FN LED
- * 3 F4 POKER Arrow LEDs
- * B2 Capslock LED
- * B0 not connected
- */
-inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
-inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
-inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
-inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); }
-inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); }
-
-inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
-inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
-inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
-inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
-inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
-
-/* GH60 keymap definition macro
- * K2C, K31 and K3C are extra keys for ISO
- */
-#define KEYMAP( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
- K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
-) { \
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \
-}
-
-/* ANSI valiant. No extra keys for ISO */
-#define KEYMAP_ANSI( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
- K40, K41, K42, K45, K4A, K4B, K4C, K4D \
-) KEYMAP( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
- K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \
- K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \
-)
-
-#define KEYMAP_HHKB( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
- K40, K41, K42, K45, K4A, K4B, K4C, K4D \
-) KEYMAP( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
- K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
- K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
-)
-
-#endif
+#ifndef GH60_H +#define GH60_H + +#include "quantum.h" +#include "led.h" + +/* GH60 LEDs + * GPIO pads + * 0 F7 WASD LEDs + * 1 F6 ESC LED + * 2 F5 FN LED + * 3 F4 POKER Arrow LEDs + * B2 Capslock LED + * B0 not connected + */ +inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); } +inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); } +inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); } +inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); } +inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); } + +inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); } +inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); } +inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } +inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); } +inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } + +/* GH60 keymap definition macro + * K2C, K31 and K3C are extra keys for ISO + */ +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ +} + +/* ANSI valiant. No extra keys for ISO */ +#define KEYMAP_ANSI( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ +) KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ + K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \ + K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \ +) + +#define KEYMAP_HHKB( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ +) KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ + K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ +) + +#endif diff --git a/keyboards/gh60/keymaps/robotmaxtron/Makefile b/keyboards/gh60/keymaps/robotmaxtron/Makefile index 2e69aee298..c73cf11417 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/Makefile +++ b/keyboards/gh60/keymaps/robotmaxtron/Makefile @@ -1,112 +1,112 @@ -#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes # Console for debug(+400)
-# COMMAND_ENABLE ?= yes # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES # MIDI controls
-# UNICODE_ENABLE ?= YES # Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
-
+#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h index 8272875ed0..6a29e6b8c2 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/config.h +++ b/keyboards/gh60/keymaps/robotmaxtron/config.h @@ -1,190 +1,190 @@ -/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER geekhack
-#define PRODUCT GH60
-#define DESCRIPTION t.m.k. keyboard firmware for GH60
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-// Rev A
-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
-// Rev B/C
- #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * RGB Underglow
- * These settings are for the F4 by default:
- *
- *
- * #define ws2812_PORTREG PORTF
- * #define ws2812_DDRREG DDRF
- * #define ws2812_pin PF4
- * #define RGBLED_NUM 14 // Number of LEDs
- * #define RGBLIGHT_HUE_STEP 10
- * #define RGBLIGHT_SAT_STEP 17
- * #define RGBLIGHT_VAL_STEP 17
- *
- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
- * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
-*/
-
-/* Deprecated code below
-#define ws2812_PORTREG PORTF
-#define ws2812_DDRREG DDRF
-#define ws2812_pin PF4
-*/
-#define RGB_DI_PIN F4
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 8 // Number of LEDs
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
+/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT GH60 +#define DESCRIPTION t.m.k. keyboard firmware for GH60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +// Rev A +// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } +// Rev B/C + #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * RGB Underglow + * These settings are for the F4 by default: + * + * + * #define ws2812_PORTREG PORTF + * #define ws2812_DDRREG DDRF + * #define ws2812_pin PF4 + * #define RGBLED_NUM 14 // Number of LEDs + * #define RGBLIGHT_HUE_STEP 10 + * #define RGBLIGHT_SAT_STEP 17 + * #define RGBLIGHT_VAL_STEP 17 + * + * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. + * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. + * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c +*/ + +/* Deprecated code below +#define ws2812_PORTREG PORTF +#define ws2812_DDRREG DDRF +#define ws2812_pin PF4 +*/ +#define RGB_DI_PIN F4 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif diff --git a/keyboards/gh60/pinout.txt b/keyboards/gh60/pinout.txt index 3787f938e7..e9bf1983a5 100644 --- a/keyboards/gh60/pinout.txt +++ b/keyboards/gh60/pinout.txt @@ -1,18 +1,18 @@ - /* Column pin configuration
- * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
- * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
- */
-
- /* Row pin configuration
- * row: 0 1 2 3 4
- * pin: D0 D1 D2 D3 D5
- */
-
- GPIO pads
- 0 F7 WASD LEDs
- 1 F6 ESC LED
- 2 F5 FN LED
- 3 F4 POKER Arrow LEDs
-
- B2 Capslock LED
+ /* Column pin configuration + * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 + * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) + */ + + /* Row pin configuration + * row: 0 1 2 3 4 + * pin: D0 D1 D2 D3 D5 + */ + + GPIO pads + 0 F7 WASD LEDs + 1 F6 ESC LED + 2 F5 FN LED + 3 F4 POKER Arrow LEDs + + B2 Capslock LED B0 not connected
\ No newline at end of file diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md index 92302d507c..8c744bfd3c 100644 --- a/keyboards/gh60/readme.md +++ b/keyboards/gh60/readme.md @@ -1,60 +1,62 @@ -## gh60 Rev C keyboard firmware
-
-
-
- /* Column pin configuration
- * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
- * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
- */
-
- /* Row pin configuration
- * row: 0 1 2 3 4
- * pin: D0 D1 D2 D3 D5
- */
-
- GPIO pads
- 0 F7 WASD LEDs
- 1 F6 ESC LED
- 2 F5 FN LED
- 3 F4 POKER Arrow LEDs
-
- B2 Capslock LED
- B0 not connected
-
-Functions to controls LED clusters
-
- gh60_caps_led_on()
- gh60_poker_leds_on()
- gh60_fn_led_on()
- gh60_esc_led_on()
- gh60_wasd_leds_on()
-
- gh60_caps_led_off()
- gh60_poker_leds_off()
- gh60_fn_led_off()
- gh60_esc_led_off()
- gh60_wasd_leds_off()
-
-======================
-
-## Quantum MK Firmware
-
-For the full Quantum feature list, see [the parent readme.md](/readme.md).
-
-## Building
-
-Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-To build with the default keymap, simply run `make`.
-
-### Other Keymaps
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
-```
-$ make KEYMAP=[default|jack|<name>]
-```
-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
+## gh60 Rev C keyboard firmware + + + + /* Column pin configuration + * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 + * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) + */ + + /* Row pin configuration + * row: 0 1 2 3 4 + * pin: D0 D1 D2 D3 D5 + */ + + GPIO pads + 0 F7 WASD LEDs + 1 F6 ESC LED + 2 F5 FN LED + 3 F4 POKER Arrow LEDs + + B2 Capslock LED + B0 not connected + +Functions to controls LED clusters + + gh60_caps_led_on() + gh60_poker_leds_on() + gh60_fn_led_on() + gh60_esc_led_on() + gh60_wasd_leds_on() + + gh60_caps_led_off() + gh60_poker_leds_off() + gh60_fn_led_off() + gh60_esc_led_off() + gh60_wasd_leds_off() + +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make default`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/gh60/rules.mk b/keyboards/gh60/rules.mk new file mode 100644 index 0000000000..aba680e45b --- /dev/null +++ b/keyboards/gh60/rules.mk @@ -0,0 +1,66 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/handwired/CMD60/Makefile b/keyboards/handwired/CMD60/Makefile index 7117599173..191c6bb664 100644 --- a/keyboards/handwired/CMD60/Makefile +++ b/keyboards/handwired/CMD60/Makefile @@ -1,73 +1,3 @@ - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - - +endif
\ No newline at end of file diff --git a/keyboards/handwired/CMD60/rules.mk b/keyboards/handwired/CMD60/rules.mk new file mode 100644 index 0000000000..7117599173 --- /dev/null +++ b/keyboards/handwired/CMD60/rules.mk @@ -0,0 +1,73 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + + diff --git a/keyboards/handwired/Makefile b/keyboards/handwired/Makefile index 57493a47ca..4e2a6f00fd 100644 --- a/keyboards/handwired/Makefile +++ b/keyboards/handwired/Makefile @@ -1,3 +1,3 @@ -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/handwired/fivethirteen/Makefile b/keyboards/handwired/fivethirteen/Makefile index 7117599173..191c6bb664 100644 --- a/keyboards/handwired/fivethirteen/Makefile +++ b/keyboards/handwired/fivethirteen/Makefile @@ -1,73 +1,3 @@ - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - - +endif
\ No newline at end of file diff --git a/keyboards/handwired/fivethirteen/rules.mk b/keyboards/handwired/fivethirteen/rules.mk new file mode 100644 index 0000000000..7117599173 --- /dev/null +++ b/keyboards/handwired/fivethirteen/rules.mk @@ -0,0 +1,73 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + + diff --git a/keyboards/handwired/minorca/Makefile b/keyboards/handwired/minorca/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/handwired/minorca/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/minorca/config.h b/keyboards/handwired/minorca/config.h new file mode 100644 index 0000000000..4cdafcbd2e --- /dev/null +++ b/keyboards/handwired/minorca/config.h @@ -0,0 +1,80 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6660 +#define DEVICE_VER 0x0001 +#define MANUFACTURER ME +#define PRODUCT MinOrca +#define DESCRIPTION Tiny Whale + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* MinOrca PCB default pin-out */ +#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 } +#define MATRIX_ROW_PINS { B0, B1, B2, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/minorca/keymaps/default/Makefile b/keyboards/handwired/minorca/keymaps/default/Makefile new file mode 100644 index 0000000000..a573488a5e --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/default/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../../Makefile +endif diff --git a/keyboards/handwired/minorca/keymaps/default/config.h b/keyboards/handwired/minorca/keymaps/default/config.h new file mode 100644 index 0000000000..bf40376c19 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/default/config.h @@ -0,0 +1,12 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* bootmagic salt key */ +#define BOOTMAGIC_KEY_SALT KC_ESC + +/* skip bootmagic and eeconfig */ +#define BOOTMAGIC_KEY_SKIP KC_SPACE + +#endif diff --git a/keyboards/handwired/minorca/keymaps/default/keymap.c b/keyboards/handwired/minorca/keymaps/default/keymap.c new file mode 100644 index 0000000000..a55d578e44 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "minorca.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = { /* Base */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, XXXXXXX, KC_ENT }, + {KC_LCTRL,XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_QUOT, KC_FN1, KC_FN0 }, + {KC_NO, XXXXXXX, KC_NO, KC_LALT, KC_SPC, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, KC_DOT, KC_SLSH, KC_NO } + }, + [1] = { /* First */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT }, + {KC_TAB, KC_MPRV, KC_MPLY, KC_MNXT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, XXXXXXX, KC_LGUI }, + {KC_LCTRL,XXXXXXX, KC_Z, KC_X, KC_C, KC_PGDN, KC_END, KC_L, KC_SCLN, KC_UP, KC_FN1, KC_FN0 }, + {KC_NO, XXXXXXX, KC_NO, KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO } + }, + [2] = { /* Second */ + {KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT }, + {KC_TAB, KC_MUTE, KC_VOLD, KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX, KC_ENT }, + {KC_CAPS, XXXXXXX, KC_LSFT, KC_RSFT, KC_PAUSE,KC_F10, KC_F11, KC_F12, KC_NO, KC_UP, KC_FN1, KC_FN0 }, + {KC_NO, XXXXXXX, KC_NO, KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO } + }, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to First overlay + [1] = ACTION_LAYER_MOMENTARY(2), // to Second overlay + +};
\ No newline at end of file diff --git a/keyboards/handwired/minorca/keymaps/default/readme.md b/keyboards/handwired/minorca/keymaps/default/readme.md new file mode 100644 index 0000000000..6ed31f82b3 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# The Default Minorca Layout + +Copied from https://github.com/pancinteractive/qmk_firmware/blob/master/keyboard/minorca_mkV/keymaps/default/keymap.c + +It looks incomplete.
\ No newline at end of file diff --git a/keyboards/handwired/minorca/keymaps/readme.md b/keyboards/handwired/minorca/keymaps/readme.md new file mode 100644 index 0000000000..058923ba25 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/readme.md @@ -0,0 +1,23 @@ +# How to add your own keymap + +Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: + + _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] + +\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements + +and contain the following files: + +* `keymap.c` +* `readme.md` *recommended* +* `config.h` *optional*, found automatically when compiling +* `Makefile` *optional*, found automatically when compling + +When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: + + * **folder_name** description + +# List of Minorca keymaps + +* **default** default Minorca layout +* **rgb** layout with WS2812b control diff --git a/keyboards/handwired/minorca/keymaps/rgb/Makefile b/keyboards/handwired/minorca/keymaps/rgb/Makefile new file mode 100644 index 0000000000..2b2af13358 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../../Makefile +endif diff --git a/keyboards/handwired/minorca/keymaps/rgb/config.h b/keyboards/handwired/minorca/keymaps/rgb/config.h new file mode 100644 index 0000000000..deaac2e26f --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/config.h @@ -0,0 +1,20 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* bootmagic salt key */ +#define BOOTMAGIC_KEY_SALT KC_ESC + +/* skip bootmagic and eeconfig */ +#define BOOTMAGIC_KEY_SKIP KC_SPACE + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D5 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 13 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif diff --git a/keyboards/handwired/minorca/keymaps/rgb/example.jpg b/keyboards/handwired/minorca/keymaps/rgb/example.jpg Binary files differnew file mode 100644 index 0000000000..a04c8d37d6 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/example.jpg diff --git a/keyboards/handwired/minorca/keymaps/rgb/keymap.c b/keyboards/handwired/minorca/keymaps/rgb/keymap.c new file mode 100644 index 0000000000..9002afbb88 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/keymap.c @@ -0,0 +1,65 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "minorca.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _TB 3 + +// Macro name shortcuts +#define QWERTY M(_QWERTY) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {FUNC(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, XXXXXXX, KC_QUOT}, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, FUNC(1)}, + {KC_LCTL, XXXXXXX, KC_LGUI, KC_LALT, FUNC(2), XXXXXXX, XXXXXXX, FUNC(3), XXXXXXX, KC_RALT, KC_APP, KC_RCTL} +}, + +[_RAISE] = { + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUSE, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), XXXXXXX, S(KC_BSLS)}, + {KC_TRNS, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_ENT}, + {KC_TRNS, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_MNXT, KC_MUTE, KC_MPLY} +}, + +[_LOWER] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, XXXXXXX, KC_BSLS}, + {KC_TRNS, XXXXXXX, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_PGUP, KC_ENT}, + {KC_TRNS, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_HOME, KC_PGDN, KC_END} +}, + +[_TB] = { /* Tab */ + {KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, KC_TRNS}, + {KC_TRNS, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_UP, KC_ENT}, + {BL_STEP, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT} +} +}; + + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_TB, KC_TAB), + [1] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [2] = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC), + [3] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), +}; diff --git a/keyboards/handwired/minorca/keymaps/rgb/readme.md b/keyboards/handwired/minorca/keymaps/rgb/readme.md new file mode 100644 index 0000000000..f50dfa546f --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/readme.md @@ -0,0 +1,25 @@ +#RGB backlight for MinOrca + + + +Example of adding WS2812b LEDs to a MinOrca. + +http://www.40percent.club/2016/08/tiny-whale.html + +The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. + +* Tab + Z Toggle on/off +* Tab + X Mode +* Tab + C Hue+ +* Tab + V Hue- +* Tab + B Saturation+ +* Tab + N Saturation- +* Tab + M Brightness+ +* Tab + , Brightness- + +Example wiring: + +WS2812 data pin is connected to D5 + + + diff --git a/keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg b/keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg Binary files differnew file mode 100644 index 0000000000..7dcbe80c5e --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg diff --git a/keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg b/keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg Binary files differnew file mode 100644 index 0000000000..fd91d3e1c9 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg diff --git a/keyboards/handwired/minorca/minorca.c b/keyboards/handwired/minorca/minorca.c new file mode 100644 index 0000000000..24e72c2a5c --- /dev/null +++ b/keyboards/handwired/minorca/minorca.c @@ -0,0 +1,6 @@ +#include "minorca.h" + +void matrix_init_kb(void) { + + matrix_init_user(); +}
\ No newline at end of file diff --git a/keyboards/handwired/minorca/minorca.h b/keyboards/handwired/minorca/minorca.h new file mode 100644 index 0000000000..158e5b4c55 --- /dev/null +++ b/keyboards/handwired/minorca/minorca.h @@ -0,0 +1,6 @@ +#ifndef MINORCA_H +#define MINORCA_H + +#include "quantum.h" + +#endif diff --git a/keyboards/handwired/minorca/readme.md b/keyboards/handwired/minorca/readme.md new file mode 100644 index 0000000000..93c767954d --- /dev/null +++ b/keyboards/handwired/minorca/readme.md @@ -0,0 +1,33 @@ +minorca keyboard firmware +====================== +Handwired 40% keyboard + +http://www.panc.co/blog/minorcasebright-information-page + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. + +### Notable forks (which some of the keymap files are from) +- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck) +- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c) +- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck) +- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid) diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk new file mode 100644 index 0000000000..c51371a781 --- /dev/null +++ b/keyboards/handwired/minorca/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
\ No newline at end of file diff --git a/keyboards/handwired/onekey/Makefile b/keyboards/handwired/onekey/Makefile index c6d10856a1..191c6bb664 100644 --- a/keyboards/handwired/onekey/Makefile +++ b/keyboards/handwired/onekey/Makefile @@ -1,65 +1,3 @@ - - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif
\ No newline at end of file diff --git a/keyboards/handwired/onekey/rules.mk b/keyboards/handwired/onekey/rules.mk new file mode 100644 index 0000000000..c6d10856a1 --- /dev/null +++ b/keyboards/handwired/onekey/rules.mk @@ -0,0 +1,65 @@ + + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/retro_refit/Makefile b/keyboards/handwired/retro_refit/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/handwired/retro_refit/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/retro_refit/config.h b/keyboards/handwired/retro_refit/config.h index f2194e550c..f2194e550c 100644 --- a/keyboards/retro_refit/config.h +++ b/keyboards/handwired/retro_refit/config.h diff --git a/keyboards/retro_refit/keymaps/default/keymap.c b/keyboards/handwired/retro_refit/keymaps/default/keymap.c index 405402d5e3..405402d5e3 100644 --- a/keyboards/retro_refit/keymaps/default/keymap.c +++ b/keyboards/handwired/retro_refit/keymaps/default/keymap.c diff --git a/keyboards/handwired/retro_refit/readme.md b/keyboards/handwired/retro_refit/readme.md new file mode 100644 index 0000000000..9f10edf9fc --- /dev/null +++ b/keyboards/handwired/retro_refit/readme.md @@ -0,0 +1,60 @@ +retro_refit keyboard firmware +====================== + +## Keyboard Info + +The retro refit keyboard used a Teensy to replace the original controller on a 386 "laptop". + +http://imgur.com/a/08Fyj + +This keyboard uses a KEYMAP macro that is a great example of using a non-standard row-column matrix. The keyboard in question had 11 rows and 8 columns, but the rows were not all horizontal, and the columns were not all vertical. For example, row 2 contained "Print Screen", "N", "M", ",", ".", "/", "Right Shift", and"Left Alt". Column 0 contained "F6", "7", "O", "'", "Q", "D", "B", "Left Alt", "Up Arrow", and "Down Arrow". + +The macro makes programming the keys easier and in a more straight-forward manner because it realigns the keys into a 6x15 sensible keyboard layout instead of the obtuse 11x8 matrix. Each Kxy corrisponds to a key in row x column y. + +``` +#define KEYMAP( \ + K77, K05, K04, K03, K02, K01, K00, KA7, KA6, KA5, KA4, KA3, KA2, K11, K94, \ + K27, K76, K75, K74, K73, K72, K71, K70, K67, K66, K65, K64, K63, K62, KA1, \ + K61, K60, K57, K56, K55, K54, K53, K52, K51, K50, K47, K46, K45, K97, \ + K43, K42, K41, K40, K37, K36, K35, K34, K33, K32, K31, K30, K44, K87, \ + K26, K24, K23, K22, K21, K20, K17, K16, K15, K14, K13, K12, KA0, K91, \ + K10, K06, K25, K07, K86, K85, K95, K90, K93 \ +) { \ +{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, }, \ +{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, }, \ +{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, }, \ +{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, }, \ +{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, }, \ +{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, }, \ +{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, }, \ +{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, }, \ +{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K85, KC_##K86, KC_##K87, }, \ +{ KC_##K90, KC_##K91, KC_NO, KC_##K93, KC_##K94, KC_##K95, KC_NO, KC_##K97, }, \ +{ KC_##KA0, KC_##KA1, KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7, } \ +} +``` + + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/retro_refit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make default`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file diff --git a/keyboards/retro_refit/retro_refit.c b/keyboards/handwired/retro_refit/retro_refit.c index 3d610eba34..3d610eba34 100644 --- a/keyboards/retro_refit/retro_refit.c +++ b/keyboards/handwired/retro_refit/retro_refit.c diff --git a/keyboards/retro_refit/retro_refit.h b/keyboards/handwired/retro_refit/retro_refit.h index 109acdc399..109acdc399 100644 --- a/keyboards/retro_refit/retro_refit.h +++ b/keyboards/handwired/retro_refit/retro_refit.h diff --git a/keyboards/retro_refit/Makefile b/keyboards/handwired/retro_refit/rules.mk index 2dd8cc5f79..10fbfa5c9d 100644 --- a/keyboards/retro_refit/Makefile +++ b/keyboards/handwired/retro_refit/rules.mk @@ -66,9 +66,3 @@ NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https # MIDI_ENABLE ?= YES # MIDI controls # UNICODE_ENABLE ?= YES # Unicode # BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR - include ../../Makefile -endif - diff --git a/keyboards/handwired/rules.mk b/keyboards/handwired/rules.mk new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/handwired/rules.mk diff --git a/keyboards/handwired/traveller/Makefile b/keyboards/handwired/traveller/Makefile index 12a4b71f4e..191c6bb664 100644 --- a/keyboards/handwired/traveller/Makefile +++ b/keyboards/handwired/traveller/Makefile @@ -1,89 +1,3 @@ - -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# for avr upload -USB ?= /dev/cu.usbmodem1421 -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - - -ifdef TEENSY2 - OPT_DEFS += -DATREUS_TEENSY2 - ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex -else - OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER - ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) -endif -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# MCU name - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 -RGBLIGHT_ENABLE = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif - -upload: build - $(ATREUS_UPLOAD_COMMAND) - +endif
\ No newline at end of file diff --git a/keyboards/handwired/traveller/rules.mk b/keyboards/handwired/traveller/rules.mk new file mode 100644 index 0000000000..12a4b71f4e --- /dev/null +++ b/keyboards/handwired/traveller/rules.mk @@ -0,0 +1,89 @@ + +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# for avr upload +USB ?= /dev/cu.usbmodem1421 +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +ifdef TEENSY2 + OPT_DEFS += -DATREUS_TEENSY2 + ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +else + OPT_DEFS += -DATREUS_ASTAR + OPT_DEFS += -DCATERINA_BOOTLOADER + ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) +endif +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# MCU name + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +RGBLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +upload: build + $(ATREUS_UPLOAD_COMMAND) + diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile index 6fe973e1eb..4e2a6f00fd 100644 --- a/keyboards/hhkb/Makefile +++ b/keyboards/hhkb/Makefile @@ -1,90 +1,3 @@ - - -# project specific files -SRC = matrix.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# as per original hasu settings -OPT_DEFS += -DBOOTLOADER_SIZE=512 - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - -ifneq (, $(findstring yes, $(HHKB_JP))) - OPT_DEFS += -DHHKB_JP -endif - -debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION -debug-on: all - -debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT -debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) -debug-off: all +endif
\ No newline at end of file diff --git a/keyboards/hhkb/keymaps/jp/Makefile b/keyboards/hhkb/keymaps/jp/Makefile index 92986292a2..a7f700f019 100644 --- a/keyboards/hhkb/keymaps/jp/Makefile +++ b/keyboards/hhkb/keymaps/jp/Makefile @@ -1 +1 @@ -HHKB_JP=yes +OPT_DEFS += -DHHKB_JP diff --git a/keyboards/hhkb/keymaps/rdg_jp/Makefile b/keyboards/hhkb/keymaps/rdg_jp/Makefile index 92986292a2..a7f700f019 100644 --- a/keyboards/hhkb/keymaps/rdg_jp/Makefile +++ b/keyboards/hhkb/keymaps/rdg_jp/Makefile @@ -1 +1 @@ -HHKB_JP=yes +OPT_DEFS += -DHHKB_JP diff --git a/keyboards/hhkb/keymaps/shela/Makefile b/keyboards/hhkb/keymaps/shela/Makefile new file mode 100644 index 0000000000..d0586bda68 --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/Makefile @@ -0,0 +1 @@ +SRC += action_pseudo_lut.c diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c new file mode 100644 index 0000000000..b205968c7b --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c @@ -0,0 +1,142 @@ +#include "quantum.h" +#include "action_pseudo_lut.h" + +static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE]; + +/* + * Pseudo layout action. + * This action converts a keycode in order to output the character according to the keymap you specified + * still your keyboard layout recognized wrongly on your OS. + * Memo: Using other layer keymap to get keycode + */ +void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) { + static uint8_t prev_shift; + uint16_t keycode; + uint16_t pseudo_keycode; + + /* get keycode from keymap you specified */ + keycode = keymap_key_to_keycode(base_keymap_id, record->event.key); + + prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)); + + if (record->event.pressed) { + /* when magic commands entered, keycode does not converted */ + if (IS_COMMAND()) { + if (prev_shift) { + add_shift_bit(keycode); + } + register_code(keycode); + return; + } + + if (prev_shift) { + pseudo_keycode = convert_keycode(keymap, keycode, true); + dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); + add_shift_bit(keycode); + + if (IS_LSFT(pseudo_keycode)) { + register_code(QK_LSFT ^ pseudo_keycode); + } else { + /* delete shift mod temporarily */ + del_mods(prev_shift); + send_keyboard_report(); + register_code(pseudo_keycode); + add_mods(prev_shift); + send_keyboard_report(); + } + } else { + pseudo_keycode = convert_keycode(keymap, keycode, false); + dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); + + if (IS_LSFT(pseudo_keycode)) { + add_weak_mods(MOD_BIT(KC_LSFT)); + send_keyboard_report(); + register_code(QK_LSFT ^ pseudo_keycode); + /* on Windows, prevent key repeat to avoid unintended output */ + unregister_code(QK_LSFT ^ pseudo_keycode); + del_weak_mods(MOD_BIT(KC_LSFT)); + send_keyboard_report(); + } else { + register_code(pseudo_keycode); + } + } + } else { + if (get_shift_bit(keycode)) { + del_shift_bit(keycode); + pseudo_keycode = convert_keycode(keymap, keycode, true); + } else { + pseudo_keycode = convert_keycode(keymap, keycode, false); + } + dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode); + + if (IS_LSFT(pseudo_keycode)) { + unregister_code(QK_LSFT ^ pseudo_keycode); + } else { + unregister_code(pseudo_keycode); + } + } +} + +uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded) +{ + uint16_t pseudo_keycode; + + switch (keycode) { + case KC_A ... KC_CAPSLOCK: +#if defined(__AVR__) + if (shift_modded) { + pseudo_keycode = pgm_read_word(&keymap[keycode][1]); + } else { + pseudo_keycode = pgm_read_word(&keymap[keycode][0]); + } +#else + if (shift_modded) { + pseudo_keycode = keymap[keycode][1]; + } else { + pseudo_keycode = keymap[keycode][0]; + } +#endif + /* if undefined, use got keycode as it is */ + if (pseudo_keycode == 0x00) { + if (shift_modded) { + pseudo_keycode = S(keycode); + } else { + pseudo_keycode = keycode; + } + } + break; + default: + if (shift_modded) { + pseudo_keycode = S(keycode); + } else { + pseudo_keycode = keycode; + } + break; + } + return pseudo_keycode; +} + +uint8_t get_shift_bit(uint16_t keycode) { + if ((keycode >> 3) < SHIFT_BIT_SIZE) { + return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7)); + } else { + dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode); + return 0; + } +} + +void add_shift_bit(uint16_t keycode) { + if ((keycode >> 3) < SHIFT_BIT_SIZE) { + send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7)); + } else { + dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode); + } +} + +void del_shift_bit(uint16_t keycode) { + if ((keycode >> 3) < SHIFT_BIT_SIZE) { + send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7)); + } else { + dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode); + } +} diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h new file mode 100644 index 0000000000..681252440f --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h @@ -0,0 +1,15 @@ +#ifndef ACTION_PSEUDO_LUT_H +#define ACTION_PSEUDO_LUT_H + +#define SHIFT_BIT_SIZE (0xE7 / 8 + 1) // 1bit per 1key + +#define IS_LSFT(kc) ((QK_LSFT & (kc)) == QK_LSFT) + +void action_pseudo_lut(keyrecord_t *, uint8_t, const uint16_t (*)[2]); +uint16_t convert_keycode(const uint16_t (*)[2], uint16_t, bool); + +uint8_t get_shift_bit(uint16_t); +void add_shift_bit(uint16_t); +void del_shift_bit(uint16_t); + +#endif diff --git a/keyboards/hhkb/keymaps/shela/config.h b/keyboards/hhkb/keymaps/shela/config.h new file mode 100644 index 0000000000..08cc1fb46e --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/config.h @@ -0,0 +1,12 @@ +#ifndef CONFIG_SHELA_H +#define CONFIG_SHELA_H + +#include "../../config.h" + +#undef TAPPING_TERM +#define TAPPING_TERM 230 + +#define ONESHOT_TAP_TOGGLE 2 +#define ONESHOT_TIMEOUT 2000 + +#endif diff --git a/keyboards/hhkb/keymaps/shela/keymap.c b/keyboards/hhkb/keymaps/shela/keymap.c new file mode 100644 index 0000000000..c286b99de8 --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/keymap.c @@ -0,0 +1,179 @@ +/* + * HHKB Pro 2 US Layout for shela + */ +#include "hhkb.h" +#include "keymap_jis2us.h" +#include "action_pseudo_lut.h" + +enum keymap_layout { + BASE = 0, + PSEUDO_US, + DVORAK, + MOUSE, + TENKEY, + HHKB, + SPACE_FN, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Layer 0: Default Layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | ` | BSp | + * |-----------------------------------------------------------------------------------------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + * |-----------------------------------------------------------------------------------------| + * | Control | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------| + * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | + * `-----------------------------------------------------------------------------------------' + * |LAlt | LGui | SpaceFN | RGui |RAlt | + * `-----------------------------------------------------------------' + */ + [BASE] = + KEYMAP(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, \ + KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \ + OSM(MOD_LSFT),KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_FN0, \ + KC_LALT,KC_LGUI, KC_FN2, KC_RGUI,KC_RALT), + + /* Layer 1: Pseudo US Layout Layer */ + [PSEUDO_US] = + KEYMAP(KC_ESC, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_BSPC, \ + KC_TAB, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, \ + KC_LCTL,KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_ENT, \ + OSM(MOD_LSFT),KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_RSFT,KC_FN0, \ + KC_LGUI,KC_FN3, KC_FN2, KC_FN4 ,KC_RGUI), + + /* Layer 2: Dvorak Layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | [ | ] | ` | BSp | + * |-----------------------------------------------------------------------------------------| + * | Tab | ' | , | . | P | Y | F | G | C | R | L | / | = | \ | + * |-----------------------------------------------------------------------------------------| + * | Control | A | O | E | U | I | D | H | T | N | S | - | Enter | + * |-----------------------------------------------------------------------------------------| + * | Shift | ; | Q | J | K | X | B | M | W | V | Z | Shift | Fn0 | + * `-----------------------------------------------------------------------------------------' + * |LAlt | LGui | SpaceFN | RGui |RAlt | + * `-----------------------------------------------------------------' + */ + [DVORAK] = + KEYMAP(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC,KC_RBRC,KC_GRV, KC_BSPC, \ + KC_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH,KC_EQL, KC_BSLS, \ + KC_LCTL,KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS,KC_ENT, \ + KC_LSFT,KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT,KC_FN0, \ + KC_LALT,KC_LGUI, KC_FN2, KC_RGUI,KC_RALT), + + /* Layer 3: Mouse layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | MwL | MwD | MwU | MwR | | | | | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | McL | McD | McU | McR | | | | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | Mb1 | Mb2 | Mb3 | | | | Fn0 | + * `-----------------------------------------------------------------------------------------' + * | | | Mb1 | | | + * `-----------------------------------------------------------------' + */ + [MOUSE] = + KEYMAP(KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_TRNS, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,KC_NO, KC_NO, KC_TRNS, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN1,KC_BTN2,KC_BTN3,KC_NO, KC_NO, KC_TRNS,KC_FN0, \ + KC_TRNS,KC_TRNS, KC_BTN1, KC_TRNS,KC_TRNS), + + /* Layer 4: Tenkey layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | | | | | | | | | | / | * | - | | BSp | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | | | | 7 | 8 | 9 | + | | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | | | | 4 | 5 | 6 | Enter | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | | | 1 | 2 | 3 | + | Fn0 | + * `-----------------------------------------------------------------------------------------' + * | | | SpaceFN | 0 | . | + * `-----------------------------------------------------------------' + */ + [TENKEY] = + KEYMAP(KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSLS,KC_PAST,KC_PMNS,KC_NO, KC_BSPC, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_7,KC_KP_8,KC_KP_9,KC_PPLS,KC_NO, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_4,KC_KP_5,KC_KP_6,KC_PENT, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_1,KC_KP_2,KC_KP_3,KC_PPLS,KC_FN0, \ + KC_TRNS,KC_TRNS, KC_FN2, KC_KP_0,KC_PDOT), + + /* Layer 5: HHKB mode (HHKB Fn) + * ,-----------------------------------------------------------------------------------------. + * | Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------| + * | Caps | Fn5 | Fn6 | Fn7 | Fn8 | Fn9 | | | Psc | Slk | Pus | Up | | BSp | + * |-----------------------------------------------------------------------------------------| + * | | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | + | - | End | PgD | Dow | | | + * `-----------------------------------------------------------------------------------------' + * | | | | | | + * `-----------------------------------------------------------------' + */ + [HHKB] = + KEYMAP(KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS,KC_FN5, KC_FN6, KC_FN7, KC_FN8, KC_FN9, KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_UP, KC_TRNS,KC_BSPC, \ + KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS), + + /* Layer 6: SpaceFN + * ,-----------------------------------------------------------------------------------------. + * | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | Del | + * |-----------------------------------------------------------------------------------------| + * | | End | Up | Hom | | | | Hom | Up | End | Psc | Slk | Pau | Ins | + * |-----------------------------------------------------------------------------------------| + * | | Lef | Dow | Rig | PgU | | PgU | Lef | Dow | Rig | | | | + * |-----------------------------------------------------------------------------------------| + * | | | | PgD | | Spc | PgD | ` | ~ | | | | | + * `-----------------------------------------------------------------------------------------' + * | | | | | | + * `-----------------------------------------------------------------' + */ + [SPACE_FN] = + KEYMAP(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL, \ + KC_TRNS,KC_END, KC_UP, KC_HOME,KC_NO, KC_NO, KC_NO, KC_HOME,KC_UP, KC_END, KC_PSCR,KC_SLCK,KC_PAUS,KC_INS, \ + KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_PGUP,KC_NO, KC_PGUP,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_NO, KC_TRNS, \ + KC_TRNS,KC_NO, KC_NO, KC_PGDN,KC_NO, KC_SPC, KC_PGDN,KC_GRV, KC_TILD,KC_NO, KC_NO, KC_TRNS,KC_NO, \ + KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS), +}; + +/* + * user defined action function + */ +enum function_id { + PSEUDO_US_FUNCTION, +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + + switch (id) { + case PSEUDO_US_FUNCTION: + action_pseudo_lut(record, BASE, keymap_jis2us); + break; + } +} + +/* + * Fn action definition + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(HHKB), + [1] = ACTION_FUNCTION(PSEUDO_US_FUNCTION), + [2] = ACTION_LAYER_TAP_KEY(SPACE_FN, KC_SPACE), + [3] = ACTION_MODS_TAP_KEY(MOD_LALT, KC_MHEN), + [4] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_KANA), + [5] = ACTION_DEFAULT_LAYER_SET(BASE), + [6] = ACTION_DEFAULT_LAYER_SET(PSEUDO_US), + [7] = ACTION_DEFAULT_LAYER_SET(MOUSE), + [8] = ACTION_DEFAULT_LAYER_SET(TENKEY), + [9] = ACTION_DEFAULT_LAYER_SET(DVORAK), +}; diff --git a/keyboards/hhkb/keymaps/shela/keymap_jis2us.h b/keyboards/hhkb/keymaps/shela/keymap_jis2us.h new file mode 100644 index 0000000000..cf2bd4f0e8 --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/keymap_jis2us.h @@ -0,0 +1,32 @@ +#ifndef KEYMAP_JIS2US_H +#define KEYMAP_JIS2US_H + +/* keymap for convert from JIS to US */ +const uint16_t PROGMEM keymap_jis2us[][2] = { + [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */ + + [KC_1] = { KC_1, KC_EXLM }, /* 1 and ! -> 1 and ! */ + [KC_2] = { KC_2, KC_LBRC }, /* 2 and " -> 2 and @ */ + [KC_3] = { KC_3, KC_HASH }, /* 3 and # -> 3 and # */ + [KC_4] = { KC_4, KC_DLR }, /* 4 and $ -> 4 and $ */ + [KC_5] = { KC_5, KC_PERC }, /* 5 and % -> 5 and % */ + [KC_6] = { KC_6, KC_EQL }, /* 6 and & -> 6 and ^ */ + [KC_7] = { KC_7, KC_CIRC }, /* 7 and ' -> 7 and & */ + [KC_8] = { KC_8, KC_DQT }, /* 8 and ( -> 8 and * */ + [KC_9] = { KC_9, KC_ASTR }, /* 9 and ) -> 9 and ( */ + [KC_0] = { KC_0, KC_LPRN }, /* 0 and (no assign) -> 0 and ) */ + [KC_MINS] = { KC_MINS, S(KC_RO) }, /* - and = -> - and _ */ + [KC_EQL] = { KC_UNDS, KC_COLN }, /* ^ and ~ -> = and + */ + [KC_LBRC] = { KC_RBRC, KC_RCBR }, /* @ and ` -> [ and { */ + [KC_RBRC] = { KC_BSLS, KC_PIPE }, /* [ and { -> ] and } */ + [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */ + [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */ + [KC_SCLN] = { KC_SCLN, KC_QUOT }, /* ; and + -> ; and : */ + [KC_QUOT] = { KC_AMPR, KC_AT }, /* : and * -> ' and " */ + [KC_GRV] = { KC_LCBR, KC_PLUS }, /* (no assign) -> ` and ~ */ + [KC_COMM] = { KC_COMM, KC_LT }, /* , and < -> , and < */ + [KC_DOT] = { KC_DOT, KC_GT }, /* . and > -> . and > */ + [KC_SLSH] = { KC_SLSH, KC_QUES }, /* / and ? -> / and ? */ +}; + +#endif diff --git a/keyboards/hhkb/keymaps/shela/readme.md b/keyboards/hhkb/keymaps/shela/readme.md new file mode 100644 index 0000000000..5a06a83632 --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/readme.md @@ -0,0 +1,14 @@ +# Shela's HHKB Layout + +Layer 0: US Layout +Layer 1: Pseudo US Layout +Layer 2: Dvorak Layout +Layer 3: Mouse +Layer 4: Tenkey +Layer 5: HHKB Fn Key +Layer 6: SpaceFN + +## Pseudo US Layout + +On japanese Windows, HHKB Professional 2 US layout model recognized wrongly as JIS layout without changing OS settings. +But, you can use HHKB like a US layout keyboard as it is. diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md index 39d49b32a1..367c0a08f7 100644 --- a/keyboards/hhkb/readme.md +++ b/keyboards/hhkb/readme.md @@ -168,13 +168,15 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|<name>] +$ make [default|jack|<name>] ``` + Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk new file mode 100644 index 0000000000..a46271f023 --- /dev/null +++ b/keyboards/hhkb/rules.mk @@ -0,0 +1,80 @@ + + +# project specific files +SRC = matrix.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +#OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# as per original hasu settings +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= yes # MIDI controls +# UNICODE_ENABLE ?= yes # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION +debug-on: all + +debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT +debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) +debug-off: all diff --git a/keyboards/infinity_chibios/MEMO.txt b/keyboards/infinity60/MEMO.txt index e2886aa002..e2886aa002 100644 --- a/keyboards/infinity_chibios/MEMO.txt +++ b/keyboards/infinity60/MEMO.txt diff --git a/keyboards/infinity60/Makefile b/keyboards/infinity60/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/infinity60/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/infinity_chibios/bootloader_defs.h b/keyboards/infinity60/bootloader_defs.h index c67153be60..c67153be60 100644 --- a/keyboards/infinity_chibios/bootloader_defs.h +++ b/keyboards/infinity60/bootloader_defs.h diff --git a/keyboards/infinity_chibios/chconf.h b/keyboards/infinity60/chconf.h index b886c383bb..43c845739a 100644 --- a/keyboards/infinity_chibios/chconf.h +++ b/keyboards/infinity60/chconf.h @@ -1,524 +1,524 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 32
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY 1000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM 20
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_TM FALSE
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY TRUE
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT TRUE
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES TRUE
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS TRUE
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES TRUE
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS TRUE
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS FALSE
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS FALSE
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS FALSE
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/* Use __WFI in the idle thread for waiting. Does lower the power + * consumption. */ +#define CORTEX_ENABLE_WFI_IDLE TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/infinity_chibios/config.h b/keyboards/infinity60/config.h index cb90222055..f8346fe165 100644 --- a/keyboards/infinity_chibios/config.h +++ b/keyboards/infinity60/config.h @@ -18,6 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifndef CONFIG_H #define CONFIG_H +#define PREVENT_STUCK_MODIFIERS /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED @@ -25,11 +26,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DEVICE_VER 0x0001 /* in python2: list(u"whatever".encode('utf-16-le')) */ /* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER "TMK" -#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00' -#define PRODUCT "Infinity keyboard/TMK" -#define USBSTR_PRODUCT 'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00' - +#define MANUFACTURER "Input Club" +#define USBSTR_MANUFACTURER 'I', '\x00', 'n', '\x00', 'p', '\x00', 'u', '\x00', 't', '\x00', ' ', '\x00', 'C', '\x00', 'l', '\x00', 'u', '\x00', 'b', '\x00' +#define PRODUCT "Infinity keyboard/QMK" +#define USBSTR_PRODUCT 'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'Q', '\x00', 'M', '\x00', 'K', '\x00' /* key matrix size */ #define MATRIX_ROWS 9 #define MATRIX_COLS 7 @@ -50,9 +50,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* Keymap for Infiity prototype */ -#define INFINITY_PROTOTYPE +/* Keymap for Infinity prototype */ +//#define INFINITY_PROTOTYPE +/* Keymap for Infinity 1.1a (first revision with LED support) */ +//#define INFINITY_LED /* * Feature disable options diff --git a/keyboards/infinity_chibios/halconf.h b/keyboards/infinity60/halconf.h index 53538de149..46b37a4f46 100644 --- a/keyboards/infinity_chibios/halconf.h +++ b/keyboards/infinity60/halconf.h @@ -1,353 +1,353 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB TRUE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB TRUE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/keyboards/infinity_chibios/infinity_chibios.c b/keyboards/infinity60/infinity60.c index 845eda01b0..e471250feb 100644 --- a/keyboards/infinity_chibios/infinity_chibios.c +++ b/keyboards/infinity60/infinity60.c @@ -14,4 +14,4 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "infinity_chibios.h" +#include "infinity60.h" diff --git a/keyboards/infinity_chibios/infinity_chibios.h b/keyboards/infinity60/infinity60.h index a44c68b82d..f1ba15e489 100644 --- a/keyboards/infinity_chibios/infinity_chibios.h +++ b/keyboards/infinity60/infinity60.h @@ -29,15 +29,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. K54, K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, \ K06, K16, K26, K36, K46, K56, K66, K76 \ ) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06 }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16 }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26 }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36 }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46 }, \ - { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56 }, \ - { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66 }, \ - { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76 }, \ - { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86 } \ + { K00, K01, K02, K03, K04, K05, K06 }, \ + { K10, K11, K12, K13, K14, K15, K16 }, \ + { K20, K21, K22, K23, K24, K25, K26 }, \ + { K30, K31, K32, K33, K34, K35, K36 }, \ + { K40, K41, K42, K43, K44, K45, K46 }, \ + { K50, K51, K52, K53, K54, K55, K56 }, \ + { K60, K61, K62, K63, K64, K65, K66 }, \ + { K70, K71, K72, K73, K74, K75, K76 }, \ + { K80, K81, K82, K83, K84, K85, K86 } \ } #else @@ -50,15 +50,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, K06, \ K16, K26, K36, K46, K56, K66, K76, K86 \ ) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06 }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16 }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26 }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36 }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46 }, \ - { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56 }, \ - { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66 }, \ - { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76 }, \ - { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86 } \ + { K00, K01, K02, K03, K04, K05, K06 }, \ + { K10, K11, K12, K13, K14, K15, K16 }, \ + { K20, K21, K22, K23, K24, K25, K26 }, \ + { K30, K31, K32, K33, K34, K35, K36 }, \ + { K40, K41, K42, K43, K44, K45, K46 }, \ + { K50, K51, K52, K53, K54, K55, K56 }, \ + { K60, K61, K62, K63, K64, K65, K66 }, \ + { K70, K71, K72, K73, K74, K75, K76 }, \ + { K80, K81, K82, K83, K84, K85, K86 } \ } #endif diff --git a/keyboards/infinity_chibios/keymaps/default/keymap.c b/keyboards/infinity60/keymaps/default/keymap.c index 2acf728494..4434128579 100644 --- a/keyboards/infinity_chibios/keymaps/default/keymap.c +++ b/keyboards/infinity60/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -#include "infinity_chibios.h" +#include "infinity60.h" const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Layer 0: Default Layer @@ -14,12 +14,12 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | |Gui|Alt | Space |Alt |Gui| | | * `-----------------------------------------------------------' */ - [0] = - KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS, GRV, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ - LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT,FN0, \ - NO, LGUI,LALT, SPC, RALT,RGUI,NO, NO), + [0] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \ + KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \ + KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,MO(1), \ + KC_NO, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_NO, KC_NO), /* Layer 1: HHKB mode (HHKB Fn) * ,-----------------------------------------------------------. @@ -34,15 +34,15 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | |Gui|Alt | Space |Alt |Gui| | | * `-----------------------------------------------------------' */ - [1] = - KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, BSPC, \ - TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,PENT, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END, PGDN,DOWN,TRNS,TRNS, \ - TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS), + [1] = KEYMAP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \ + KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), }; const uint16_t fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), + }; diff --git a/keyboards/infinity60/keymaps/depariel/keymap.c b/keyboards/infinity60/keymaps/depariel/keymap.c new file mode 100755 index 0000000000..7412b9b9dd --- /dev/null +++ b/keyboards/infinity60/keymaps/depariel/keymap.c @@ -0,0 +1,82 @@ +#include "infinity60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default Layer + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Bksp| + * |-----------------------------------------------------------| + * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| + * |-----------------------------------------------------------' + * |Fn2 |Gui |Alt | Space |RAlt|Prv|PlPs|Next| + * `-----------------------------------------------------------' + */ + [0] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, LT(5, KC_ENT), \ + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, MO(4), \ + MO(4), KC_LGUI, KC_LALT, LT(3, KC_SPC), KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT), + + /* Layer 1: "Toggle" off SpaceFn for League of Legends + */ + [1] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(4), \ + MO(4), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT), + + /* Layer 2: "Toggle" off SpaceFn for MapleRoyals + */ + [2] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_LSFT, \ + MO(4), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Layer 3: FN layer 1 + */ + [3] = KEYMAP( + KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \ + KC_NO, KC_BTN1, KC_MS_U, KC_BTN2, LALT(KC_F4), KC_HOME, KC_PGUP, KC_PSCR, KC_SLCK, KC_UP, KC_NO, KC_LPRN, KC_RPRN, KC_DEL, \ + MO(6), KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_END, KC_PGDN, KC_TILD, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, \ + LGUI(KC_SPC), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_CALC, KC_MENU, KC_TRNS, TG(4), \ + KC_TRNS, KC_TRNS, KC_TRNS, LT(3, KC_SPC), KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU), + + /* Layer 4: FN layer 2 + */ + [4] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PMNS, KC_PPLS, KC_PSLS, TG(2), \ + KC_CAPS, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_NO, KC_P7, KC_P8, KC_P9, KC_PAST, KC_BSPC, \ + KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P4, KC_P5, KC_P6, KC_PENT, \ + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P1, KC_P2, KC_P3, KC_RSFT, MO(4), \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P0, KC_PDOT, KC_NO, TG(1)), + + /* Layer 5: FN layer 3 + */ + [5] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TAB , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F13, KC_F14, KC_F15, KC_F16, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F17, KC_F18, KC_F19, KC_F20, LT(5, KC_ENT), \ + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F21, KC_F22, KC_F23, KC_F24, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_NO, KC_NO, KC_NO), + + /* Layer 6: FN layer 4 + */ + [6] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + LCTL(LSFT(KC_TAB)), KC_NO, LGUI(KC_UP), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + MO(6), LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + diff --git a/keyboards/infinity60/keymaps/hasu/keymap.c b/keyboards/infinity60/keymaps/hasu/keymap.c new file mode 100644 index 0000000000..d3728869ab --- /dev/null +++ b/keyboards/infinity60/keymaps/hasu/keymap.c @@ -0,0 +1,113 @@ +#include "infinity60.h" + +const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default Layer + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| + * |-----------------------------------------------------------' + * | |Gui|Alt | Space |Alt |Gui| | | + * `-----------------------------------------------------------' + */ + [0] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(3, KC_SCLN), KC_QUOT,MT(KC_RCTL, KC_ENT), \ + OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, LT(2, KC_SLSH), KC_RSFT,TG(1), \ + KC_NO, KC_LGUI,KC_LALT, LT(4, KC_SPC), MO(4), KC_RGUI,KC_NO, KC_NO), + + /* Layer 1: HHKB mode (HHKB Fn) + * ,-----------------------------------------------------------. + * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| + * |-----------------------------------------------------------| + * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | + * |-----------------------------------------------------------| + * | | | | | | | +| -|End|PgD|Dow| | | + * `-----------------------------------------------------------' + * | |Gui|Alt | Space |Alt |Gui| | | + * `-----------------------------------------------------------' + */ + [1] = KEYMAP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP, KC_TRNS,KC_BSPC, \ + KC_LCTL,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_ENT, \ + KC_LSFT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_RSFT,KC_TRNS, \ + KC_TRNS,KC_LGUI,KC_LALT, KC_TRNS, KC_RALT,KC_RGUI,KC_TRNS,KC_TRNS), + + /* Layer 2: Vi mode[Slash] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs| + * |-----------------------------------------------------------| + * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return | + * |-----------------------------------------------------------| + * |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | | + * `-----------------------------------------------------------' + * |Gui|Alt | Space |Alt |Gui| + * `-------------------------------------------' + */ + [2] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_TAB, KC_HOME,KC_PGDN,KC_UP, KC_PGUP,KC_END, KC_HOME,KC_PGDN,KC_PGUP,KC_END, KC_NO, KC_NO, KC_NO, KC_BSPC, \ + KC_LCTL,KC_NO, KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_LEFT,KC_DOWN,KC_UP, KC_RGHT,KC_NO, KC_NO, KC_ENT, \ + KC_LSFT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME,KC_PGDN,KC_PGUP,KC_END, LT(2, KC_SLSH), KC_RSFT,KC_TRNS, \ + KC_TRNS,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_TRNS, KC_TRNS), + + /* Layer 3: Mouse mode(IJKL)[Semicolon] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| + * |-----------------------------------------------------------| + * |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return | + * |-----------------------------------------------------------| + * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | + * `-----------------------------------------------------------' + * |Gui |Alt | Mb1 |Fn |Fn | + * `--------------------------------------------' + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel + */ + [3] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + LALT(KC_TAB), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L,KC_WH_D,KC_MS_U, KC_WH_U, KC_WH_R, ALT_T(KC_LEFT), ALT_T(KC_RGHT),LALT(KC_TAB), \ + KC_LCTL, KC_ACL0,KC_ACL1,KC_ACL2,KC_ACL2,KC_NO, KC_NO, KC_MS_L,KC_MS_D, KC_MS_R, LT(3, KC_SCLN), KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT), ALT_T(KC_RGHT), KC_NO, KC_RSFT, KC_TRNS, \ + KC_TRNS, KC_LGUI,KC_LALT, KC_BTN1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Layer 4: Mouse mode(IJKL)[Space] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| + * |-----------------------------------------------------------| + * |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return | + * |-----------------------------------------------------------| + * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | + * `-----------------------------------------------------------' + * |Gui |Alt | Mb1 |Fn |Fn | + * `--------------------------------------------' + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel + */ + [4] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + LALT(KC_TAB), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L,KC_WH_D,KC_MS_U, KC_WH_U, KC_WH_R,KC_BTN4,KC_BTN5,LALT(KC_TAB), \ + KC_LCTL, KC_VOLD,KC_VOLU,KC_MUTE,KC_NO, KC_NO, KC_NO, KC_MS_L,KC_MS_D, KC_MS_R, KC_BTN1,KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT),ALT_T(KC_RGHT),KC_NO, KC_RSFT,KC_TRNS, \ + KC_TRNS, KC_LGUI,KC_LALT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS), + +}; + +/* + * Fn action definition + */ +const uint16_t fn_actions[] = { + +}; diff --git a/keyboards/infinity_chibios/led.c b/keyboards/infinity60/led.c index aed66c7c03..aed66c7c03 100644 --- a/keyboards/infinity_chibios/led.c +++ b/keyboards/infinity60/led.c diff --git a/keyboards/infinity_chibios/matrix.c b/keyboards/infinity60/matrix.c index 2c68ea83ab..62c165aa53 100644 --- a/keyboards/infinity_chibios/matrix.c +++ b/keyboards/infinity60/matrix.c @@ -12,9 +12,12 @@ * Infinity Pinusage: * Column pins are input with internal pull-down. Row pins are output and strobe with high. * Key is high or 1 when it turns on. - * + * INFINITY PRODUCTION (NO LED) * col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 } * row: { PTB0, PTB1, PTB2, PTB3, PTB16, PTB17, PTC4, PTC5, PTD0 } + * INFINITY PRODUCTION (WITH LED) + * col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 } + * row: { PTC0, PTC1, PTC2, PTC3, PTC4, PTC5, PTC6, PTC7, PTD0 } */ /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -34,6 +37,18 @@ void matrix_init(void) palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLDOWN); palSetPadMode(GPIOD, 7, PAL_MODE_INPUT_PULLDOWN); +#ifdef INFINITY_LED + /* Row(strobe) */ + palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 1, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 2, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 3, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 4, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 5, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 6, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 7, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL); +#else /* Row(strobe) */ palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL); palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL); @@ -44,7 +59,7 @@ void matrix_init(void) palSetPadMode(GPIOC, 4, PAL_MODE_OUTPUT_PUSHPULL); palSetPadMode(GPIOC, 5, PAL_MODE_OUTPUT_PUSHPULL); palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL); - +#endif memset(matrix, 0, MATRIX_ROWS); memset(matrix_debouncing, 0, MATRIX_ROWS); } @@ -53,7 +68,20 @@ uint8_t matrix_scan(void) { for (int row = 0; row < MATRIX_ROWS; row++) { matrix_row_t data = 0; - + #ifdef INFINITY_LED + // strobe row + switch (row) { + case 0: palSetPad(GPIOC, 0); break; + case 1: palSetPad(GPIOC, 1); break; + case 2: palSetPad(GPIOC, 2); break; + case 3: palSetPad(GPIOC, 3); break; + case 4: palSetPad(GPIOC, 4); break; + case 5: palSetPad(GPIOC, 5); break; + case 6: palSetPad(GPIOC, 6); break; + case 7: palSetPad(GPIOC, 7); break; + case 8: palSetPad(GPIOD, 0); break; + } + #else // strobe row switch (row) { case 0: palSetPad(GPIOB, 0); break; @@ -66,12 +94,26 @@ uint8_t matrix_scan(void) case 7: palSetPad(GPIOC, 5); break; case 8: palSetPad(GPIOD, 0); break; } + #endif wait_us(1); // need wait to settle pin state // read col data data = (palReadPort(GPIOD)>>1); - + #ifdef INFINITY_LED + // un-strobe row + switch (row) { + case 0: palClearPad(GPIOC, 0); break; + case 1: palClearPad(GPIOC, 1); break; + case 2: palClearPad(GPIOC, 2); break; + case 3: palClearPad(GPIOC, 3); break; + case 4: palClearPad(GPIOC, 4); break; + case 5: palClearPad(GPIOC, 5); break; + case 6: palClearPad(GPIOC, 6); break; + case 7: palClearPad(GPIOC, 7); break; + case 8: palClearPad(GPIOD, 0); break; + } + #else // un-strobe row switch (row) { case 0: palClearPad(GPIOB, 0); break; @@ -84,6 +126,7 @@ uint8_t matrix_scan(void) case 7: palClearPad(GPIOC, 5); break; case 8: palClearPad(GPIOD, 0); break; } + #endif if (matrix_debouncing[row] != data) { matrix_debouncing[row] = data; diff --git a/keyboards/infinity_chibios/mcuconf.h b/keyboards/infinity60/mcuconf.h index 66b6ce25de..f453304b75 100644 --- a/keyboards/infinity_chibios/mcuconf.h +++ b/keyboards/infinity60/mcuconf.h @@ -1,55 +1,55 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define K20x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-
-/* Select the MCU clocking mode below by enabling the appropriate block. */
-
-#define KINETIS_NO_INIT FALSE
-
-/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
-#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
-#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
-#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
-#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
-#define KINETIS_CLKDIV1_OUTDIV1 1
-#define KINETIS_CLKDIV1_OUTDIV2 1
-#define KINETIS_CLKDIV1_OUTDIV4 2
-#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY
-#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2
-
-/*
- * SERIAL driver system settings.
- */
-#define KINETIS_SERIAL_USE_UART0 TRUE
-
-/*
- * USB driver settings
- */
-#define KINETIS_USB_USE_USB0 TRUE
-/* Need to redefine this, since the default is for K20x */
-/* This is for Teensy LC; you should comment it out (or change to 5)
- * for Teensy 3.x */
-#define KINETIS_USB_USB0_IRQ_PRIORITY 2
-
-#endif /* _MCUCONF_H_ */
+/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ + +/* Select the MCU clocking mode below by enabling the appropriate block. */ + +#define KINETIS_NO_INIT FALSE + +/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 +#define KINETIS_CLKDIV1_OUTDIV2 1 +#define KINETIS_CLKDIV1_OUTDIV4 2 +#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY +#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* Need to redefine this, since the default is for K20x */ +/* This is for Teensy LC; you should comment it out (or change to 5) + * for Teensy 3.x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/infinity60/readme.md b/keyboards/infinity60/readme.md new file mode 100644 index 0000000000..97457b4077 --- /dev/null +++ b/keyboards/infinity60/readme.md @@ -0,0 +1,29 @@ +Infinity 60% keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Keymaps + +Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` + + +## Compiling + +Download or clone the whole firmware and navigate to the keyboards/infinity60 folder. Once your dev env is setup, you'll be able to use the `make` command to both compile your keymap and flash it to your keyboard. + +To just compile, which generates the output files in the `.build` folder at the root of the repository, run `make keymap`, where keymap is the name of the keymap that you want to compile. + +## Flashing + +To flash the firmware to the keyboard + +1. First press the flash button on the bottom of the keyboard. If you already have a flah button mapped in a keyboard layout running on the keyboard, you can also use that. +2. Then run `make keymap-dfu-util`, where keymap is the name of the keymap you want to flash. On Linux based operating systems you might need to run the comamnd as root, for example `sudo make keymap-dfu-util` on Ubuntu. + +**Tip** `make keymap-dfu-util` will also compile the keymap if needed, so you can skip the compilation step if you want to. + diff --git a/keyboards/infinity_chibios/Makefile b/keyboards/infinity60/rules.mk index 649b43e64d..56d6470b59 100644 --- a/keyboards/infinity_chibios/Makefile +++ b/keyboards/infinity60/rules.mk @@ -63,8 +63,4 @@ CONSOLE_ENABLE ?= yes # Console for debug COMMAND_ENABLE ?= yes # Commands for debug and configuration SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend NKRO_ENABLE ?= yes # USB Nkey Rollover -CUSTOM_MATRIX ?= yes # Custom matrix file - -ifndef QUANTUM_DIR - include ../../Makefile -endif
\ No newline at end of file +CUSTOM_MATRIX ?= yes # Custom matrix file
\ No newline at end of file diff --git a/keyboards/infinity_chibios/keymaps/hasu/keymap.c b/keyboards/infinity_chibios/keymaps/hasu/keymap.c deleted file mode 100644 index e9a212f0eb..0000000000 --- a/keyboards/infinity_chibios/keymaps/hasu/keymap.c +++ /dev/null @@ -1,199 +0,0 @@ -#include "infinity_chibios.h" - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp| - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| - * |-----------------------------------------------------------' - * | |Gui|Alt | Space |Alt |Gui| | | - * `-----------------------------------------------------------' - */ - [0] = - KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ - LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \ - FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ - NO, LGUI,LALT, FN4, FN5, RGUI,NO, NO), - - /* Layer 1: HHKB mode (HHKB Fn) - * ,-----------------------------------------------------------. - * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| - * |-----------------------------------------------------------| - * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | - * |-----------------------------------------------------------| - * | | | | | | | +| -|End|PgD|Dow| | | - * `-----------------------------------------------------------' - * | |Gui|Alt | Space |Alt |Gui| | | - * `-----------------------------------------------------------' - */ - [1] = - KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS,BSPC, \ - LCTL,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ - LSFT,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \ - TRNS,LGUI,LALT, TRNS, RALT,RGUI,TRNS,TRNS), - - /* Layer 2: Vi mode[Slash] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs| - * |-----------------------------------------------------------| - * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return | - * |-----------------------------------------------------------| - * |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | | - * `-----------------------------------------------------------' - * |Gui|Alt | Space |Alt |Gui| - * `-------------------------------------------' - */ - [2] = \ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \ - LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \ - LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,TRNS, \ - TRNS,LGUI,LALT, SPC, RALT,RGUI,TRNS,TRNS), - - /* Layer 3: Mouse mode(IJKL)[Semicolon] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| - * |-----------------------------------------------------------| - * |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return | - * |-----------------------------------------------------------| - * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | - * `-----------------------------------------------------------' - * |Gui |Alt | Mb1 |Fn |Fn | - * `--------------------------------------------' - * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel - */ - [3] = \ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,FN9, FN10,FN8, \ - LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,FN3, NO, ENT, \ - LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \ - TRNS,LGUI,LALT, BTN1, TRNS,TRNS,TRNS,TRNS), - - /* Layer 4: Mouse mode(IJKL)[Space] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| - * |-----------------------------------------------------------| - * |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return | - * |-----------------------------------------------------------| - * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | - * `-----------------------------------------------------------' - * |Gui |Alt | Mb1 |Fn |Fn | - * `--------------------------------------------' - * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel - */ - [4] = \ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,BTN4,BTN5,FN8, \ - LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \ - LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \ - TRNS,LGUI,LALT, TRNS, TRNS,TRNS,TRNS,TRNS), - -}; - -/* id for user defined functions */ -enum function_id { - LSHIFT_LPAREN, -}; - -enum macro_id { - HELLO, - VOLUP, - ALT_TAB, -}; - -/* - * Fn action definition - */ -const uint16_t fn_actions[] = { - [0] = ACTION_DEFAULT_LAYER_SET(0), // Default layer(not used) - [1] = ACTION_LAYER_TAP_TOGGLE(1), // HHKB layer(toggle with 5 taps) - [2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash* - [3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon* - [4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space - [5] = ACTION_LAYER_MOMENTARY(4), // Mousekey layer(IJKL) - [6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter - [7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift - [8] = ACTION_MACRO(ALT_TAB), // Application switching - [9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT), - [10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT), -}; - -/* - * Macro definition - */ -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch (id) { - case HELLO: - return (record->event.pressed ? - MACRO( I(0), T(H), T(E), T(L), T(L), W(255), T(O), END ) : - MACRO_NONE ); - case VOLUP: - return (record->event.pressed ? - MACRO( D(VOLU), U(VOLU), END ) : - MACRO_NONE ); - case ALT_TAB: - return (record->event.pressed ? - MACRO( D(LALT), D(TAB), END ) : - MACRO( U(TAB), END )); - } - return MACRO_NONE; -} - - - -/* - * user defined action function - */ -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - if (record->event.pressed) dprint("P"); else dprint("R"); - dprintf("%d", record->tap.count); - if (record->tap.interrupted) dprint("i"); - dprint("\n"); - - switch (id) { - case LSHIFT_LPAREN: - // Shift parentheses example: LShft + tap '(' - // http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses - // http://geekhack.org/index.php?topic=41989.msg1304899#msg1304899 - if (record->event.pressed) { - if (record->tap.count > 0 && !record->tap.interrupted) { - if (record->tap.interrupted) { - dprint("tap interrupted\n"); - register_mods(MOD_BIT(KC_LSHIFT)); - } - } else { - register_mods(MOD_BIT(KC_LSHIFT)); - } - } else { - if (record->tap.count > 0 && !(record->tap.interrupted)) { - add_weak_mods(MOD_BIT(KC_LSHIFT)); - send_keyboard_report(); - register_code(KC_9); - unregister_code(KC_9); - del_weak_mods(MOD_BIT(KC_LSHIFT)); - send_keyboard_report(); - record->tap.count = 0; // ad hoc: cancel tap - } else { - unregister_mods(MOD_BIT(KC_LSHIFT)); - } - } - break; - } -} diff --git a/keyboards/jd40/Makefile b/keyboards/jd40/Makefile new file mode 100644 index 0000000000..242748111c --- /dev/null +++ b/keyboards/jd40/Makefile @@ -0,0 +1,74 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow + +ifndef QUANTUM_DIR + include ../../Makefile +endif + diff --git a/keyboards/jd40/config.h b/keyboards/jd40/config.h new file mode 100644 index 0000000000..e2594f4b37 --- /dev/null +++ b/keyboards/jd40/config.h @@ -0,0 +1,79 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT jd40v2 +#define DESCRIPTION t.m.k. keyboard firmware for JD40 MKII + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F1, F5, B4 } +#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#endif diff --git a/keyboards/jd40/jd40.c b/keyboards/jd40/jd40.c new file mode 100644 index 0000000000..fa06356d97 --- /dev/null +++ b/keyboards/jd40/jd40.c @@ -0,0 +1,26 @@ +#include "jd40.h" + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + + // if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // gh60_caps_led_on(); + // } else { + // gh60_caps_led_off(); + // } + + // if (usb_led & (1<<USB_LED_NUM_LOCK)) { + // gh60_esc_led_on(); + // } else { + // gh60_esc_led_off(); + // } + + // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { + // gh60_fn_led_on(); + // } else { + // gh60_fn_led_off(); + // } + + led_set_user(usb_led); +} diff --git a/keyboards/jd40/jd40.h b/keyboards/jd40/jd40.h new file mode 100644 index 0000000000..77a1222993 --- /dev/null +++ b/keyboards/jd40/jd40.h @@ -0,0 +1,45 @@ +#ifndef JD40_H +#define JD40_H + +#include "quantum.h" +#include "led.h" + +/* GH60 LEDs + * GPIO pads + * 0 F7 WASD LEDs + * 1 F6 ESC LED + * 2 F5 FN LED + * 3 F4 POKER Arrow LEDs + * B2 Capslock LED + * B0 not connected + */ + + /* +inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); } +inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); } +inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); } +inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); } +inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); } + +inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); } +inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); } +inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } +inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); } +inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } +*/ + +/* JD40 MKII keymap definition macro + */ +#define KEYMAP( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, \ + K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, \ + K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, \ + K35, K36, K37, K38, K39, K40, K41, K42, K43, K44 \ +) { \ + { KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K10, KC_##K11, KC_##K12 }, \ + { KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_NO }, \ + { KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO }, \ + { KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_NO, KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_NO } \ +} + +#endif diff --git a/keyboards/jd40/keymaps/default/keymap.c b/keyboards/jd40/keymaps/default/keymap.c new file mode 100644 index 0000000000..79ac146c9e --- /dev/null +++ b/keyboards/jd40/keymaps/default/keymap.c @@ -0,0 +1,164 @@ +#include "jd40.h" +#include "action_layer.h" + +#define _BL 0 +#define _AL 1 +#define _FL 2 +#define _UL 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BL] = KEYMAP( + F12, Q, W, E, R, T, Y, U, I, O, P, BSPC, + TAB, A, S, D, F, G, H, J, K, L, ENT, + LSFT, Z, X, C, V, B, N, M, COMM, UP, DOT, + LCTL, LGUI, LALT, FN0, SPC, SPC, FN0, LEFT, DOWN, RIGHT ), + + [_AL] = KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, DEL, + CAPS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, SCLN, PGUP, QUOT, + TRNS, TRNS, TRNS, TRNS, FN3, FN3, TRNS, HOME, PGDN, END ), + + [_FL] = KEYMAP( + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS ), + + [_UL] = KEYMAP( + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, FN4, FN5, FN11, FN10, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS ), +}; + +enum function_id { + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // Momentary Fn overlay + [1] = ACTION_LAYER_TOGGLE(2), // Toggle Arrow Layer overlay + [2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer + [3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay + [4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow + [5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode + [6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + [12] = ACTION_FUNCTION(SHIFT_ESC), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + +// Layer LED indicators +// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster + uint32_t layer = layer_state; + if (layer & (1<<1)) { + //gh60_wasd_leds_on(); + } else { + //gh60_wasd_leds_off(); + } + + if (layer & (1<<2)) { + //gh60_esc_led_on(); + } else { + //gh60_esc_led_off(); + } +}; + +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + static uint8_t shift_esc_shift_mask; + // Shift + ESC = ~ + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +}; diff --git a/keyboards/jd40/readme.md b/keyboards/jd40/readme.md new file mode 100644 index 0000000000..7daa0980eb --- /dev/null +++ b/keyboards/jd40/readme.md @@ -0,0 +1,17 @@ +## jd40 mkii keyboard firmware + + Pins: + MATRIX_ROW_PINS { F0, F1, F5, B4 } + MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2 } + RGB_DI_PIN D3 + +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/jd40 folder. +Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Amtel Flip to program your .hex file. diff --git a/keyboards/jd40/rules.mk b/keyboards/jd40/rules.mk new file mode 100644 index 0000000000..2f18fdf10d --- /dev/null +++ b/keyboards/jd40/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
\ No newline at end of file diff --git a/keyboards/jd45/Makefile b/keyboards/jd45/Makefile index 75d544f16a..4e2a6f00fd 100644 --- a/keyboards/jd45/Makefile +++ b/keyboards/jd45/Makefile @@ -1,71 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/jd45/keymaps/jeebak/config.h b/keyboards/jd45/keymaps/jeebak/config.h new file mode 100644 index 0000000000..53a1f0a307 --- /dev/null +++ b/keyboards/jd45/keymaps/jeebak/config.h @@ -0,0 +1,16 @@ +#include "../../config.h" + +/** + *JD45 keymap definition macro + */ +#define KEYMAP_JD45( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, \ + K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, \ + K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, K37, \ + K38, K39, K40, K41, K42, K43, K44, K45, K46, K47 \ +) { \ + { K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13 }, \ + { K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, KC_NO }, \ + { K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, K37, KC_NO }, \ + { K38, K39, K40, K41, K42, KC_NO, K43, KC_NO, K44, K45, K46, K47, KC_NO } \ +} diff --git a/keyboards/jd45/keymaps/jeebak/keymap.c b/keyboards/jd45/keymaps/jeebak/keymap.c new file mode 100644 index 0000000000..8d26cbde12 --- /dev/null +++ b/keyboards/jd45/keymaps/jeebak/keymap.c @@ -0,0 +1,423 @@ +#include "jd45.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _TOUCHCURSOR 6 +#define _MOUSECURSOR 7 +#define _ADJUST 16 + +// Keycodes +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +enum macro_keycodes { + KC_ALT_TAB, + KC_CMD_TAB, + KC_CTL_TAB, + KC_CMD_SLSH, + KC_AG_FIND, + KC_AG_AGAIN, + KC_AG_UNDO, + KC_AG_CUT, + KC_AG_COPY, + KC_AG_PASTE, + KC_AG_DESK_L, + KC_AG_DESK_R, + KC_AG_TAB_C, + KC_AG_TAB_N, + KC_AG_TAB_R, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper +#define GUI_SEM GUI_T(KC_SCLN) // Tap for Semicolon, hold for GUI +#define ALT_QUO ALT_T(KC_QUOT) // Tap for Quote, hold for Alt +// Requires KC_TRNS/_______ for the trigger key in the destination layer +#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor +#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor +#define ALT_TAB M(KC_ALT_TAB) // Macro for Alt-Tab +#define CMD_TAB M(KC_CMD_TAB) // Macro for Cmd-Tab +#define CTL_TAB M(KC_CTL_TAB) // Macro for Ctl-Tab +#define CMD_SLSH M(KC_CMD_SLSH) // Macro for Cmd-Slash (personal shortcut to toggle iTerm2 visibility) +#define AG_FIND M(KC_AG_FIND) // Macros for Cmd-[x] vs Ctrl-[x] based on current AG_NORM or AG_SWAP settings +#define AG_AGAIN M(KC_AG_AGAIN) +#define AG_UNDO M(KC_AG_UNDO) +#define AG_CUT M(KC_AG_CUT) +#define AG_COPY M(KC_AG_COPY) +#define AG_PASTE M(KC_AG_PASTE) +#define AG_D_L M(KC_AG_DESK_L) // For Virtual Desktop Switching: Left, and +#define AG_D_R M(KC_AG_DESK_R) // Right +#define AG_T_C M(KC_AG_TAB_C) // For Chrome, etc. Tab Close, +#define AG_T_N M(KC_AG_TAB_N) // Tab New, and +#define AG_T_R M(KC_AG_TAB_R) // Tab Reopen Closed + +/* Qwerty + * + * ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + * |Hyper/Tab| Q | W | E | R | T | Y | U | I | O | P | Bksp | Bksp | + * |---------`------`------`------`------`------`------`------`------`------`------`------`------| + * | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L |GUI/; | Alt/" | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | Shift | Z | X | C | V | B | N | M | , | . | / | Sft/Ent | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | RGUI | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol- | Vol+ | Play | + * `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QWERTY] = KEYMAP_JD45( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/ + HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_BSPC, +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/ + CTL_ESC , KC_A, KC_S,LT_MC(KC_D), KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, GUI_SEM, ALT_QUO , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + KC_RGUI , KC_LALT , KC_LGUI , LOWER , LT_TC , LT_TC , RAISE , KC_VOLD , KC_VOLU , KC_MPLY), +/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/ + +/* Colemak + * ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + * |Hyper/Tab| Q | W | F | P | G | J | L | U | Y | ; | Bksp | Bksp | + * |---------`------`------`------`------`------`------`------`------`------`------`------`------| + * | Ctrl/Esc | A | R | MC/S | T | D | H | N | E | I | O | " | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | Shift | Z | X | C | V | B | K | M | , | . | / | Sft/Ent | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | RGUI | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol- | Vol+ | Play | + * `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' + */ +[_COLEMAK] = KEYMAP_JD45( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/ + HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, KC_BSPC, +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/ + CTL_ESC , KC_A, KC_R,LT_MC(KC_S), KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + KC_RGUI , KC_LALT , KC_LGUI , LOWER , LT_TC , LT_TC , RAISE , KC_VOLD , KC_VOLU , KC_MPLY), +/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/ + +/* Dvorak + * ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + * |Hyper/Tab| " | , | . | P | Y | F | G | C | R | L | Bksp | Bksp | + * |---------`------`------`------`------`------`------`------`------`------`------`------`------| + * | Ctrl/Esc | A | O | MC/E | U | I | D | H | T | N | S | / | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | Shift | ; | Q | J | K | X | B | M | W | V | Z | Sft/Ent | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | RGUI | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol- | Vol+ | Play | + * `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' + */ +[_DVORAK] = KEYMAP_JD45( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/ + HPR_TAB,KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, KC_BSPC, +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/ + CTL_ESC , KC_A, KC_O,LT_MC(KC_E), KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + KC_LSFT , KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + KC_RGUI , KC_LALT , KC_LGUI , LOWER , LT_TC , LT_TC , RAISE , KC_VOLD , KC_VOLU , KC_MPLY), +/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/ + +/* Lower + * ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | Bksp | + * |---------`------`------`------`------`------`------`------`------`------`------`------`------| + * | [ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | "|" | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | ] | F7 | F8 | F9 | F10 | F11 | F12 | - | = | [ | ] | \ | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | Brite | | | | | | | Prev | Next | Mute | + * `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' + */ +[_LOWER] = KEYMAP_JD45( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/ + KC_TILD,KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, KC_BSPC, +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/ + KC_LBRC , KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + KC_RBRC , KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + BACKLIT , _______, _______, _______, _______ , _______ , _______, KC_MPRV, KC_MNXT, KC_MUTE), +/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/ + +/* Raise + * ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | Bksp | + * |---------`------`------`------`------`------`------`------`------`------`------`------`------| + * | $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | "|" | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | Brite | | | | | | | Prev | Next | Mute | + * `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' + */ +[_RAISE] = KEYMAP_JD45( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/ + KC_0 , KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_BSPC, +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/ + KC_DLR , KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_DOT, KC_4, KC_5, KC_6, KC_ASTR, KC_PIPE , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + KC_EQL , KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_DOT, KC_1, KC_2, KC_3, KC_SLSH, KC_BSLS , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + BACKLIT , _______, _______, _______, _______ , _______ , _______, KC_MPRV, KC_MNXT, KC_MUTE), +/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/ + +/* TouchCursor layer (http://martin-stone.github.io/touchcursor/) plus personal customizations + * ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + * | AltTab |CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | | + * |---------`------`------`------`------`------`------`------`------`------`------`------`------| + * | | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L| Desk_R | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | | | | | | | | | | | + * `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' + * + * The KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND, and KC_AGAIN keycodes don't + * seem to work on Mac. Presumably they'll work under Windows. + */ + +[_TOUCHCURSOR] = KEYMAP_JD45( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/ + ALT_TAB,CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______, _______, +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/ + _______ ,KC_LALT, KC_SPC, AG_T_C, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, AG_D_L, AG_D_R , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + _______ ,AG_UNDO, AG_CUT, AG_COPY,AG_PASTE, KC_GRV, KC_PGDN, KC_DEL, AG_T_N, AG_T_R,CMD_SLSH, _______ , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + _______ , _______, _______, _______, _______ , _______ , _______, _______, _______, _______), +/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/ + +/* Mouse Layer + * ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + * | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | | | + * |---------`------`------`------`------`------`------`------`------`------`------`------`------| + * | |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | | | | | | | | | | | + * `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' + */ + +[_MOUSECURSOR] = KEYMAP_JD45( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/ + _______,_______, KC_ACL0, _______, _______, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______, _______, +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/ + _______ ,KC_ACL2, KC_BTN2, _______, KC_BTN1, KC_ACL1, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4, KC_BTN5 , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + _______ ,_______, _______, _______, KC_BTN3, _______, KC_WH_D, KC_BTN1, _______, _______, KC_BTN3, _______ , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + _______ , _______, _______, _______, _______, _______, _______, _______, _______, _______), +/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/ + +/* Plover layer (http://opensteno.org) + * ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + * | # | # | # | # | # | # | # | # | # | # | # | # | # | + * |---------`------`------`------`------`------`------`------`------`------`------`------`------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | TogOut | S | K | W | R | * | * | R | B | G | S | Z | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | Exit | | A | O | | | E | U | | | + * `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' + */ + +[_PLOVER] = KEYMAP_JD45( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/ + KC_1 , KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/ + XXXXXXX , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + XXXXXXX , KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + EXT_PLV , XXXXXXX, KC_C, KC_V, XXXXXXX , XXXXXXX , KC_N, KC_M, XXXXXXX, XXXXXXX), +/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/ + +/* Adjust (Lower + Raise) + * ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + * | | | | | | | | | | | | | Del | + * |---------`------`------`------`------`------`------`------`------`------`------`------`------| + * | | | | | |AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | | | | | | | | | | | | | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | | | | | | | | | | Reset | + * `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' + */ +[_ADJUST] = KEYMAP_JD45( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/ + _______,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/ + _______ ,_______, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______ , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + _______ ,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + _______ , _______, _______, _______, _______ , _______ , _______, _______, _______, RESET) +/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/ +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + bool use_cmd = true; // Use, for example, Cmd-Tab, Cmd-C, Cmd-V, etc. + // Compare to MAGIC_SWAP_ALT_GUI and MAGIC_UNSWAP_ALT_GUI configs, set in: + // quantum/quantum.c + if(keymap_config.swap_lalt_lgui == 1 && keymap_config.swap_ralt_rgui == 1) { + use_cmd = false; // ... or, Alt-Tab, Ctrl-C, Ctrl-V, etc. + } + + switch (id) { + case KC_ALT_TAB: + if(use_cmd) { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } + else { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } + case KC_CMD_TAB: + if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } + else { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } + + case KC_CTL_TAB: + return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END )); + case KC_CMD_SLSH: + return (record->event.pressed ? MACRO( D(LGUI), D(SLSH),END ) : MACRO( U(SLSH),END )); + + case KC_AG_FIND: + return use_cmd ? MACRODOWN( D(LGUI), T(F), END ) : MACRODOWN( D(LCTRL), T(F), END ); + case KC_AG_AGAIN: + return use_cmd ? MACRODOWN( D(LGUI), T(G), END ) : MACRODOWN( D(LCTRL), T(G), END ); + case KC_AG_UNDO: + return use_cmd ? MACRODOWN( D(LGUI), T(Z), END ) : MACRODOWN( D(LCTRL), T(Z), END ); + case KC_AG_CUT: + return use_cmd ? MACRODOWN( D(LGUI), T(X), END ) : MACRODOWN( D(LCTRL), T(X), END ); + case KC_AG_COPY: + return use_cmd ? MACRODOWN( D(LGUI), T(C), END ) : MACRODOWN( D(LCTRL), T(C), END ); + case KC_AG_PASTE: + return use_cmd ? MACRODOWN( D(LGUI), T(V), END ) : MACRODOWN( D(LCTRL), T(V), END ); + + case KC_AG_DESK_L: + return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(SCLN), END ) : MACRODOWN( D(LALT), D(LCTRL), T(SCLN), END ); + case KC_AG_DESK_R: + return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(QUOT), END ) : MACRODOWN( D(LALT), D(LCTRL), T(QUOT), END ); + + case KC_AG_TAB_C: + return use_cmd ? MACRODOWN( D(LGUI), T(W), END ) : MACRODOWN( D(LCTRL), T(W), END ); + case KC_AG_TAB_N: + return use_cmd ? MACRODOWN( D(LGUI), T(T), END ) : MACRODOWN( D(LCTRL), T(T), END ); + case KC_AG_TAB_R: + return use_cmd ? MACRODOWN( D(LGUI), D(LSHIFT), T(T), END ) : MACRODOWN( D(LCTRL), D(LSHIFT), T(T), END ); + } + + return MACRO_NONE; +} diff --git a/keyboards/jd45/keymaps/jeebak/readme.md b/keyboards/jd45/keymaps/jeebak/readme.md new file mode 100644 index 0000000000..2e45a46d9b --- /dev/null +++ b/keyboards/jd45/keymaps/jeebak/readme.md @@ -0,0 +1,129 @@ +jeebak's JD45 layout +======================= +NOTE: This is a port of jeebak's planck layout, for jd45. + +This WIP keymap attempts to minimize fingers straying away from the home row. +To aid in this endeavor, when additional modifyer keys to switch layers are +needed, they will be mapped to home row keys. The `keymap.c` file will contain +the exact changes. The diagrams in this README shows the highlights of the +changes from the default mappings. + +I also decided to change all calls to `persistant_default_layer_set()` to +`default_layer_set()` since this is my personal perference. + +## Macros +``` +#define ALT_TAB M(KC_ALT_TAB) +``` + +## Base Layers (Qwerty/Colemak/Dvorak) +These base layers are mostly the same as the default mappings. The interesting +changes are shown below. + +- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held, +- `GUI/;` as `;` and `GUI`, +- `Alt/"` as `"` and `Alt`, +- `Sft/Ent` as `Enter` and `Shift`, and +- `Hyper/Tab` as `Tab` and `Hyper` + +A `TODO` item is to see if it can also act as a `CapsLock` when double-tapped. +The arrow keys, which have been moved to the +[TouchCursor](http://martin-stone.github.io/touchcursor/) layer, have been +replaced with the Media keys as shown. The `MC/kc` key activates the +`MouseCursor` layer when held, and emits the corresponding `kc` for its layer, +when tapped. +``` + ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + |Hyper/Tab| Q | W | E | R | T | Y | U | I | O | P | [ | Bksp | + |---------`------`------`------`------`------`------`------`------`------`------`------`------| + | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L |GUI/; | Alt/" | + |----------`------`------`------`------`------`------`------`------`------`------`------------| + | Shift | Z | X | C | V | B | N | M | , | . | / | Sft/Ent | + |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + | RGUI | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol- | Vol+ | Play | + `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' +``` + +## Lower Layer (Symbols and Function Keys) +The symbols and functions keys are essentially the same as the default mapping. +The most notable changes are that the symbol keys from the `RAISE` layer have +been moved here. The remaining Media keys replace those that are now on the +base layers. The `BACKLIT` key has also been moved here. +``` + ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | Bksp | + |---------`------`------`------`------`------`------`------`------`------`------`------`------| + | [ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | "|" | + |----------`------`------`------`------`------`------`------`------`------`------`------------| + | ] | F7 | F8 | F9 | F10 | F11 | F12 | - | = | [ | ] | \ | + |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + | Brite | | | | | | | Prev | Next | Mute | + `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' +``` + +## Raise Layer (Numbers and Arithmetic Operators) +All of the numbers and arithmetic operators are available on this layer. Some +keys are duplicated for the convenience of their positions. The `0` and `$` +keys at the far left are for quick access to beginning and end of line in vim. +``` + ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | Bksp | + |---------`------`------`------`------`------`------`------`------`------`------`------`------| + | $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | "|" | + |----------`------`------`------`------`------`------`------`------`------`------`------------| + | = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ | + |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + | Brite | | | | | | | Prev | Next | Mute | + `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' +``` + +## TouchCursor layer plus personal customizations +[TouchCursor](http://martin-stone.github.io/touchcursor/) uses the `Space` key +as the modifier, with the `IJKL` home row keys representing the inverted-T of +the arrow keys. All of the default TouchCursor keymappings for the right hand +are represented below. My personalizations include all of the keys shown for +the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key +from the base layers) readily accessible from the home row allows quick word +jumps and highlighting when used in conjunction with the arrow keys. The +`Alt-Tab` macro is not only useful under Windows, but also under Mac when used +with alternative switchers like [HyperSwitch](https://bahoom.com/hyperswitch). +The `Cmd-Tab` and `Ctrl-Tab` sequences are duplicated for easy access while in +this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN` +keycodes do not seem to work. There are macros in place that'll "automatically" +choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`, +etc.) depending on which layout you've currently selected (`AG_NORM` or +`AG_SWAP`) in the `_ADJUST` layer. The `Desk_L` and `Desk_R` macros are what I +use to switch between Virtual Desktops Left/Right. The `Tab_C`, `Tab_N` and +`Tab_R` are for "Close Tab," "New Tab" and "Reopen Closed Tab" for apps such as +Google Chrome. +``` + ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + | AltTab |CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | | + |---------`------`------`------`------`------`------`------`------`------`------`------`------| + | | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L| Desk_R | + |----------`------`------`------`------`------`------`------`------`------`------`------------| + | | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| | + |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + | | | | | | | | | | | + `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' +``` + +## Mouse Layer +The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer. +The `D` key (on QWERTY) is used to activate this layer. All 16 keycodes for the +mouse from the `doc/keycode.txt` file are represented, and logically located, +IMHO. The left and right click buttons are duplicated; on the right hand side, +for a quick click here and there, and again on the left hand side for when the +buttons need to be held for dragging things or highlighting text, thus allowing +the right hand to be free to use the up/down/left/right actions. +``` + ,---------+------+------+------+------+------+------+------+------+------+------+------+------. + | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | | | + |---------`------`------`------`------`------`------`------`------`------`------`------`------| + | |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 | + |----------`------`------`------`------`------`------`------`------`------`------`------------| + | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | | + |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + | | | | | | | | | | | + `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------' +``` diff --git a/keyboards/jd45/rules.mk b/keyboards/jd45/rules.mk new file mode 100644 index 0000000000..2f1e266a14 --- /dev/null +++ b/keyboards/jd45/rules.mk @@ -0,0 +1,67 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file diff --git a/keyboards/kc60/Makefile b/keyboards/kc60/Makefile index b00a488b91..57b2ef62e5 100644 --- a/keyboards/kc60/Makefile +++ b/keyboards/kc60/Makefile @@ -1,76 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif - diff --git a/keyboards/kc60/kc60.h b/keyboards/kc60/kc60.h index 34eab4b2a0..c3a0165c09 100644 --- a/keyboards/kc60/kc60.h +++ b/keyboards/kc60/kc60.h @@ -3,21 +3,92 @@ #include "quantum.h" +// K49 key is for the key at row 1 and column 15 when you split the backspace in 2 1U key. + // This a shortcut to help you visually see your layout. // The first section contains all of the arguements // The second converts the arguments into a multi-dimensional array +/* + * ,-----------------------------------------------------------------------------------------. + * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | K49 | + * |-----------------------------------------------------------------------------------------+ + * | K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | + * |-----------------------------------------------------------------------------------------+ + * | K20 | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | + * |-----------------------------------------------------------------------------------------+ + * | K30 | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3D | K3C | + * |-----------------------------------------------------------------------------------------+ + * | K40 | K41 | K42 | K45 | K4A | K4B | K4C | K4D | + * `-----------------------------------------------------------------------------------------' + */ #define KEYMAP( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, }, \ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ - { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO,K4A, K4B, K4C, K4D } \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ } #endif + +/* Default layout + * ,-----------------------------------------------------------------------------------------. + * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | + * |-----------------------------------------------------------------------------------------+ + * | K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | + * |-----------------------------------------------------------------------------------------+ + * | K20 | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | + * |-----------------------------------------------------------------------------------------+ + * | K30 | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | + * |-----------------------------------------------------------------------------------------+ + * | K40 | K41 | K42 | K45 | K4A | K4B | K4C | K4D | + * `-----------------------------------------------------------------------------------------' + */ + +/* Mini Lshift + * ,-----------------------------------------------------------------------------------------. + * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | + * |-----------------------------------------------------------------------------------------+ + * | K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | + * |-----------------------------------------------------------------------------------------+ + * | K20 | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | + * |-----------------------------------------------------------------------------------------+ + * | K30 |K31| K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | + * |-----------------------------------------------------------------------------------------+ + * | K40 | K41 | K42 | K45 | K4A | K4B | K4C | K4D | + * `-----------------------------------------------------------------------------------------' + */ + +/* Mini Rshift + * ,-----------------------------------------------------------------------------------------. + * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | + * |-----------------------------------------------------------------------------------------+ + * | K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | + * |-----------------------------------------------------------------------------------------+ + * | K20 | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | + * |-----------------------------------------------------------------------------------------+ + * | K30 | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | K3D | + * |-----------------------------------------------------------------------------------------+ + * | K40 | K41 | K42 | K45 | K4A | K4B | K4C | K4D | + * `-----------------------------------------------------------------------------------------' + */ + +/* Mini Enter + * ,-----------------------------------------------------------------------------------------. + * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | + * |-----------------------------------------------------------------------------------------+ + * | K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | + * |-----------------------------------------------------------------------------------------+ + * | K20 | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | K2D | + * |-----------------------------------------------------------------------------------------+ + * | K30 | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | + * |-----------------------------------------------------------------------------------------+ + * | K40 | K41 | K42 | K45 | K4A | K4B | K4C | K4D | + * `-----------------------------------------------------------------------------------------' + */
\ No newline at end of file diff --git a/keyboards/kc60/keymaps/dbroqua/keymap.c b/keyboards/kc60/keymaps/dbroqua/keymap.c new file mode 100644 index 0000000000..e17827fad9 --- /dev/null +++ b/keyboards/kc60/keymaps/dbroqua/keymap.c @@ -0,0 +1,103 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +#define _QWERTY 0 +#define _FNCAPS 1 +#define _FNRIGHTSHIFT 2 + +// Fillers to make layering more clear +#define ______ KC_TRNS +#define XXXXXXX KC_NO + +// Func macro definitions. +#define S_LED FUNC(0) +#define S_LEDI FUNC(1) +#define S_LEDD FUNC(2) + +// Enable these functions using FUNC(n) macro. +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_BACKLIGHT_TOGGLE(), + [1] = ACTION_BACKLIGHT_INCREASE(), + [2] = ACTION_BACKLIGHT_DECREASE() + }; + +/* + * | | | + * | | | + * | | | + * | | | + * | | + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | ` | Bksp| + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + * |-----------------------------------------------------------------------------------------+ + * | Caps/FN1| A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | Up | FN2 | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | Gui | Alt | Space | AltGr | Left | Down | Right | + * `-----------------------------------------------------------------------------------------' + */ + [0] = KEYMAP( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + LT(_FNCAPS, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_FNRIGHTSHIFT), KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT \ + ), + +/* Layer 1 + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | Psc | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | Led | Led-| Led+| | Mute| Vol+| Vol-| | | | Play | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | Prev | Stop | Next | + * `-----------------------------------------------------------------------------------------' + */ + [_FNCAPS] = KEYMAP( /* Layer 1 */ + ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, KC_PSCR,______, ______, ______, ______, ______, ______, \ + ______, ______, S_LED, S_LEDI, S_LEDD,______,KC_MUTE,KC_VOLU,KC_VOLD,______, ______, ______, ______,KC_MPLY, \ + ______, ______, ______, ______, KC_DEL, ______, KC_MPRV, KC_MSTP, KC_MNXT \ + ), + +/* Layer 2 + * ,-----------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | PgUp | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | Home | PgDown| End | + * `-----------------------------------------------------------------------------------------' + */ + [_FNRIGHTSHIFT] = KEYMAP( /* Layer 2 */ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_PGUP, \ + ______, ______, ______, ______, ______, ______, KC_HOME,KC_PGDN,KC_END \ + ), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/dbroqua/readme.md b/keyboards/kc60/keymaps/dbroqua/readme.md new file mode 100644 index 0000000000..b71d10ab04 --- /dev/null +++ b/keyboards/kc60/keymaps/dbroqua/readme.md @@ -0,0 +1,11 @@ +# Dbroqua Layout + +* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/24fa7821d4955ec3c76037c8e159a199 +* Online keyboard layout editor (caps layer): http://www.keyboard-layout-editor.com/#/gists/4136d4d1555d6f0d9403c21aaf50fd37 +* Online keyboard layout editor (fn2 layer): http://www.keyboard-layout-editor.com/#/gists/cf4955f73f339020dbb41c15364e7e4f + +# Programming Instructions: +Enter into programming mode and run the following command. +``` +$ sudo KEYMAP=dbroqua make dfu +```
\ No newline at end of file diff --git a/keyboards/kc60/keymaps/default/keymap.c b/keyboards/kc60/keymaps/default/keymap.c index 6f8352c695..293ff3ab46 100644 --- a/keyboards/kc60/keymaps/default/keymap.c +++ b/keyboards/kc60/keymaps/default/keymap.c @@ -9,7 +9,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, RESET \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_RGUI, KC_RALT, KC_RCTL, RESET \ ), }; diff --git a/keyboards/kc60/keymaps/sgoodwin/keymap.c b/keyboards/kc60/keymaps/sgoodwin/keymap.c index 99e95c2326..3192b25142 100644 --- a/keyboards/kc60/keymaps/sgoodwin/keymap.c +++ b/keyboards/kc60/keymaps/sgoodwin/keymap.c @@ -13,21 +13,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \ MO(2), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, DF(1) \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_RGUI, KC_RALT, KC_RCTL, DF(1) \ ), [1] = KEYMAP( /* Basic QWERTY */ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ MO(2), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, DF(0) \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_RGUI, KC_RALT, KC_RCTL, DF(0) \ ), [2] = KEYMAP( /* KBP v60-like arrows, media keys, etc */ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, BL_INC, BL_DEC, BL_STEP, \ KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_NO, KC_TRNS, \ KC_TRNS, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, DEBUG, RESET, KC_TRNS, KC_NO \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_NO, DEBUG, RESET, KC_TRNS, KC_NO \ ), }; diff --git a/keyboards/kc60/keymaps/stanleylai/keymap.c b/keyboards/kc60/keymaps/stanleylai/keymap.c index 057c73bf4d..212fa88bd0 100644 --- a/keyboards/kc60/keymaps/stanleylai/keymap.c +++ b/keyboards/kc60/keymaps/stanleylai/keymap.c @@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, MO(_FL), KC_UP, \ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI,KC_LEFT, KC_DOWN, KC_RGHT), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_RGUI,KC_LEFT, KC_DOWN, KC_RGHT), // Function layer [_FL] = KEYMAP( @@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_MPRV,KC_UP, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR,KC_SLCK, KC_PAUS, KC_INS, \ KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_TRNS,KC_NO, KC_MUTE,KC_VOLD,KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, LT(_RGBL, KC_PGUP),\ - KC_TRNS,KC_TRNS,KC_TRNS, KC_MPLY, KC_TRNS,KC_HOME, KC_PGDN, KC_END), + KC_TRNS,KC_TRNS,KC_TRNS, KC_MPLY, KC_NO, KC_TRNS,KC_HOME, KC_PGDN, KC_END), // RGB Layer [_RGBL] = KEYMAP( @@ -39,13 +39,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_TRNS,KC_NO, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS), + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_NO, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS), #else RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS), + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_NO, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS), #endif }; diff --git a/keyboards/kc60/keymaps/wigguno/keymap.c b/keyboards/kc60/keymaps/wigguno/keymap.c index 50b1d0f981..dca2826eb1 100644 --- a/keyboards/kc60/keymaps/wigguno/keymap.c +++ b/keyboards/kc60/keymaps/wigguno/keymap.c @@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, MO(1), KC_RGUI, KC_RCTL \ ), /* @@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, BL_DEC, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, \ - RESET, KC_TRNS, KC_TRNS, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + RESET, KC_TRNS, KC_TRNS, BL_TOGG, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ ), }; diff --git a/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png b/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png Binary files differnew file mode 100644 index 0000000000..cc6a630a59 --- /dev/null +++ b/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png diff --git a/keyboards/kc60/keymaps/workman-dead/keymap.c b/keyboards/kc60/keymaps/workman-dead/keymap.c new file mode 100644 index 0000000000..9e3b9bb656 --- /dev/null +++ b/keyboards/kc60/keymaps/workman-dead/keymap.c @@ -0,0 +1,183 @@ +#include "kc60.h" + +#define _WM 0 +#define _QW 1 +#define _DK 2 +#define _FUN 3 +#define _MS 4 + +#define _______ KC_NO +#define XXXXXXX KC_TRNS + +#define _DK_ACT 0 +#define _DK_REL 1 +#define _KC_COMS 2 +#define _KC_CENT 3 + +#define DK_ACT M(_DK_ACT) // activate dead key layer +#define DK_REL M(_DK_REL) // release dead key layer +#define KC_COMS M(_KC_COMS) // comma + space +#define KC_CENT M(_KC_CENT) // comma + enter +#define KC_TABM LT(_MS, KC_TAB) // press for tab, hold for mouse layer +#define KC_SPFN LT(_FUN, KC_SPC) // press for space, hold for function layer (aka spacefn) +#define KC_DFQW DF(_QW) // set default layer to qwerty +#define KC_DFWM DF(_WM) // set default layer to workman +#define KC_CMDQ LGUI(KC_Q) // command + q +#define KC_CMDD LGUI(KC_D) // command + d +#define KC_CMDA LGUI(KC_A) // command + a +#define KC_CMDS LGUI(KC_S) // command + s +#define KC_CMDZ LGUI(KC_Z) // command + z +#define KC_CMDX LGUI(KC_X) // command + x +#define KC_CMDC LGUI(KC_C) // command + c +#define KC_CMDV LGUI(KC_V) // command + v +#define KC_CSTB S(RCTL(KC_TAB)) // shift + control + tab +#define KC_C_TB RCTL(KC_TAB) // control + tab +#define KC_C_LF RCTL(KC_LEFT) // control + left +#define KC_C_RT RCTL(KC_RGHT) // control + right + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// Workman +/* +* ,-----------------------------------------------------------. +* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp | +* |-----------------------------------------------------------| +* |Tab/M| Q| D| R| W| B| J| F| U| P| ;| [| ]| \ | +* |-----------------------------------------------------------| +* |Ctrl | A| S| H| T| G| Y| N| E| O| I| '| Return | +* |-----------------------------------------------------------| +* |Shift | Z| X| M| C| V| K| L| ,| .| /| Shift | +* |-----------------------------------------------------------| +* |Ctrl | Alt | GUI | Space/FN | Alt | GUI | Ctrl | qwerty | +* `-----------------------------------------------------------' +*/ +[_WM] = KEYMAP( /* Workman */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TABM, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_LCTL, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT, _______, KC_ENT, \ + KC_LSFT, _______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, DK_ACT, KC_DOT, KC_SLSH, _______, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPFN, _______, KC_RALT, KC_RGUI, KC_RCTL, KC_DFQW), + +// QWERTY +/* +* ,-----------------------------------------------------------. +* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp | +* |-----------------------------------------------------------| +* |Tab/M| Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | +* |-----------------------------------------------------------| +* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | +* |-----------------------------------------------------------| +* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | +* |-----------------------------------------------------------| +* |Ctrl | Alt | GUI | Space/FN | Alt | GUI | Ctrl | workman | +* `-----------------------------------------------------------' +*/ +[_QW] = KEYMAP( /* QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TABM, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, _______, KC_ENT, \ + KC_LSFT, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, DK_ACT, KC_DOT, KC_SLSH, _______, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPFN, _______, KC_RALT, KC_RGUI, KC_RCTL, KC_DFWM), + +// dead key layer +/* +* ,-----------------------------------------------------------. +* | | | | | | | | | | | | | | Bsp | +* |-----------------------------------------------------------| +* | | %| &| ?| +| @| $| _| [| ]| !| ~| ^| | +* |-----------------------------------------------------------| +* | | #| (| =| 0| {| }| 1| *| )| -| `| Return | +* |-----------------------------------------------------------| +* | | 6| 7| 8| 9| || \| 2| 3| 4| 5| | +* |-----------------------------------------------------------| +* |Ctrl | Alt | GUI | , | Alt | GUI | Ctrl | | +* `-----------------------------------------------------------' +*/ +[_DK] = KEYMAP( /* dead key layer */ + XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, \ + XXXXXXX, KC_PERC, KC_AMPR, KC_QUES, KC_PLUS, KC_AT, KC_DLR, KC_UNDS, KC_LBRC, KC_RBRC, KC_EXLM, KC_TILD, KC_CIRC, _______, \ + _______, KC_HASH, KC_LPRN, KC_EQL, KC_0, KC_LCBR, KC_RCBR, KC_1, KC_ASTR, KC_RPRN, KC_MINS, KC_GRV, _______, KC_CENT, \ + _______, _______, KC_6, KC_7, KC_8, KC_9, KC_PIPE, KC_BSLS, KC_2, DK_REL, KC_4, KC_5, _______, _______, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_COMS, _______, KC_RALT, KC_RGUI, KC_RCTL, _______), + +// function layer +/* +* ,-----------------------------------------------------------. +* | | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|Del | +* |-----------------------------------------------------------| +* |Esc | Cq| Cd|cstb|ctb| | |pgd| up|pgu| | | |ins | +* |-----------------------------------------------------------| +* |Shift | Ca| Cs|clt|crt| | | lt| dw| rt|home|end| Bsp | +* |-----------------------------------------------------------| +* |Shift | Cz| Cx| | Cc| Cv| V-| V+|mute| | | | +* |-----------------------------------------------------------| +* |Ctrl | Alt | GUI | | Alt | GUI | Ctrl | Reset | +* `-----------------------------------------------------------' +*/ +[_FUN] = KEYMAP( /* function layer */ + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_ESC, KC_CMDQ, KC_CMDD, KC_CSTB, KC_C_TB, _______, _______, KC_PGDN, KC_UP, KC_PGUP, _______, _______, _______, KC_INS, \ + KC_LSFT, KC_CMDA, KC_CMDS, KC_C_LF, KC_C_RT, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, KC_END, _______, KC_BSPC, \ + KC_LSFT, _______, KC_CMDZ, KC_CMDX, _______, KC_CMDC, KC_CMDV, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_TRNS, _______, KC_RALT, KC_RGUI, KC_RCTL, RESET), + +// mouse layer +/* +* ,-----------------------------------------------------------. +* | | | | | | | | | | | | | | | +* |-----------------------------------------------------------| +* | |fast|med|slow| | | | | up| | | | | | +* |-----------------------------------------------------------| +* | | | | | | | | lt| dw| rt| rc| | | +* |-----------------------------------------------------------| +* | | | | | | | | | | | | | +* |-----------------------------------------------------------| +* | | | | lc | | | | | +* `-----------------------------------------------------------' +*/ +[_MS] = KEYMAP( /* mouse layer */ + XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + XXXXXXX, KC_ACL2, KC_ACL1, KC_ACL0, _______, _______, _______, _______, KC_MS_U, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN2, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _KC_COMS: + if (record->event.pressed) { + return MACRO(T(COMM), T(SPC), END); // comma + space + } + break; + case _KC_CENT: + if (record->event.pressed) { + return MACRO(T(COMM), T(ENT), END); // comma + enter + } + break; + case _DK_ACT: + if (record->event.pressed) { + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || keyboard_report->mods & MOD_BIT(KC_RSFT)) { // act as comma when shift is pressed (eg <) + register_code(KC_COMM); + } else { // activate oneshot dead key layer otherwise + layer_on(_DK); + set_oneshot_layer(_DK, ONESHOT_START); + } + } else { // make sure to deactive dead key layer on key release + clear_oneshot_layer_state(ONESHOT_PRESSED); + unregister_code(KC_COMM); + } + break; + case _DK_REL: + if (record->event.pressed) { // act as 3 on keypress + register_code(KC_3); + } else { // make sure to deactive dead key layer on key release + clear_oneshot_layer_state(ONESHOT_PRESSED); + unregister_code(KC_3); + } + break; + } + + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/workman-dead/readme.md b/keyboards/kc60/keymaps/workman-dead/readme.md new file mode 100644 index 0000000000..f1fcdc9606 --- /dev/null +++ b/keyboards/kc60/keymaps/workman-dead/readme.md @@ -0,0 +1,17 @@ +# Workman dead with spacefn (kc60 @ QMK) + +## Layout reference + + +## Build + +To build this keymap, simply run `make KEYMAP=workman-dead`. + +## Notes + +* the default layout is `workman` (try it out, it's awesome!), but it can be changed to `qwerty` with the `rebel` key (the function layer won't change though) +* `comma` acts as a dead key, that means tapping/holding it will activate the **oneshot** `dead key` layer (marked red in the reference) +* hold `space` to access the `function` layer (marked blue in the reference) +* hold `tab` to activate the mouse layer +* the `function` layer contains mostly osx specific shortcuts +* on the right side of the bottom row `alt` and `super` are switched compared to a standard layout diff --git a/keyboards/kc60/keymaps/ws2812/keymap.c b/keyboards/kc60/keymaps/ws2812/keymap.c index 1c0574df09..ae11ebf91c 100644 --- a/keyboards/kc60/keymaps/ws2812/keymap.c +++ b/keyboards/kc60/keymaps/ws2812/keymap.c @@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(_FL), KC_RCTL), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT,KC_RGUI, MO(_FL), KC_RCTL), /* Keymap _FL: Function Layer * ,-----------------------------------------------------------. @@ -53,13 +53,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, RESET), #else KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, RESET), #endif }; diff --git a/keyboards/kc60/led.c b/keyboards/kc60/led.c new file mode 100644 index 0000000000..50659d7247 --- /dev/null +++ b/keyboards/kc60/led.c @@ -0,0 +1,31 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output low + DDRB |= (1<<2); + PORTB &= ~(1<<2); + } else { + // Hi-Z + DDRB &= ~(1<<2); + PORTB &= ~(1<<2); + } +}
\ No newline at end of file diff --git a/keyboards/kc60/readme.md b/keyboards/kc60/readme.md index acc0df68dc..da84f6159a 100644 --- a/keyboards/kc60/readme.md +++ b/keyboards/kc60/readme.md @@ -10,18 +10,27 @@ Download or clone the whole firmware and navigate to the keyboards/kc60 folder. Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|<name>] +$ make [default|jack|<name>] ``` + Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. ## WS2812 Support  -Build with WS2812 Support by running `make KEYMAP=ws2812`. +Build with WS2812 Support by running `make ws2812`. + +## Warning +For those who want to use 2x1U instead of classic backspace you need to use K0D and K49 like this: +* K0D represents the key at the right of =. +* K49 represents the last key of the row (is wired at the right of the space key on the PCB) + +In kc60.h I've put several definitions' examples of possible layouts proposed by online editor (http://123.57.250.164:9128/). diff --git a/keyboards/kc60/rules.mk b/keyboards/kc60/rules.mk new file mode 100644 index 0000000000..a935ed19ee --- /dev/null +++ b/keyboards/kc60/rules.mk @@ -0,0 +1,71 @@ +# project specific files +SRC = led.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/kinesis/Makefile b/keyboards/kinesis/Makefile index ca077e6366..4e2a6f00fd 100644 --- a/keyboards/kinesis/Makefile +++ b/keyboards/kinesis/Makefile @@ -1,79 +1,3 @@ - -## Project specific files - -SRC= matrix.c - -# MCU name -MCU = at90usb1286 -#MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=1024 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming -CUSTOM_MATRIX=yes # need to do our own thing with the matrix - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - - +endif
\ No newline at end of file diff --git a/keyboards/kinesis/readme.md b/keyboards/kinesis/readme.md index a990f9cb99..79c86581e6 100644 --- a/keyboards/kinesis/readme.md +++ b/keyboards/kinesis/readme.md @@ -27,16 +27,16 @@ Depending on which keymap you would like to use, you will have to compile slight ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` -$ make keymap=[default|jack|<name>] +$ make [default|jack|<name>] ``` Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/kinesis/rules.mk b/keyboards/kinesis/rules.mk new file mode 100644 index 0000000000..a4a2b7d156 --- /dev/null +++ b/keyboards/kinesis/rules.mk @@ -0,0 +1,73 @@ + +## Project specific files + +SRC= matrix.c + +# MCU name +MCU = at90usb1286 +#MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=1024 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming +CUSTOM_MATRIX=yes # need to do our own thing with the matrix diff --git a/keyboards/kitten_paw/Makefile b/keyboards/kitten_paw/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/kitten_paw/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/kitten_paw/config.h b/keyboards/kitten_paw/config.h new file mode 100644 index 0000000000..d7089734aa --- /dev/null +++ b/keyboards/kitten_paw/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6050 +#define DEVICE_VER 0x0104 +#define MANUFACTURER Costar +#define PRODUCT Majestouch + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 18 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +//#define MATRIX_ROW_PINS { D0, D5 } +//#define MATRIX_COL_PINS { F1, F0, B0 } +//#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/kitten_paw/keymaps/default/keymap.c b/keyboards/kitten_paw/keymaps/default/keymap.c new file mode 100644 index 0000000000..64aa672d0a --- /dev/null +++ b/keyboards/kitten_paw/keymaps/default/keymap.c @@ -0,0 +1,51 @@ +#include "kitten_paw.h" + +enum layers { + DEFAULT, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DEFAULT] = KEYMAP(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +}
\ No newline at end of file diff --git a/keyboards/kitten_paw/keymaps/ickerwx/config.h b/keyboards/kitten_paw/keymaps/ickerwx/config.h new file mode 100644 index 0000000000..04a2d253c7 --- /dev/null +++ b/keyboards/kitten_paw/keymaps/ickerwx/config.h @@ -0,0 +1,31 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#undef MOUSEKEY_MOVE_MAX +#define MOUSEKEY_MOVE_MAX 127 +#undef MOUSEKEY_WHEEL_MAX +#define MOUSEKEY_WHEEL_MAX 110 +#undef MOUSEKEY_MOVE_DELTA +#define MOUSEKEY_MOVE_DELTA 5 +#undef MOUSEKEY_WHEEL_DELTA +#define MOUSEKEY_WHEEL_DELTA 1 +#undef MOUSEKEY_DELAY +#define MOUSEKEY_DELAY 50 +#undef MOUSEKEY_INTERVAL +#define MOUSEKEY_INTERVAL 20 +#undef MOUSEKEY_MAX_SPEED +#define MOUSEKEY_MAX_SPEED 4 +#undef MOUSEKEY_TIME_TO_MAX +#define MOUSEKEY_TIME_TO_MAX 30 +#undef MOUSEKEY_WHEEL_MAX_SPEED +#define MOUSEKEY_WHEEL_MAX_SPEED 3 +#undef MOUSEKEY_WHEEL_TIME_TO_MAX +#define MOUSEKEY_WHEEL_TIME_TO_MAX 1000 +#undef ONESHOT_TIMEOUT +#define ONESHOT_TIMEOUT 500 +#undef TAPPING_TOGGLE +#define TAPPING_TOGGLE 2 + +#endif diff --git a/keyboards/kitten_paw/keymaps/ickerwx/keymap.c b/keyboards/kitten_paw/keymaps/ickerwx/keymap.c new file mode 100644 index 0000000000..9a00c80dc8 --- /dev/null +++ b/keyboards/kitten_paw/keymaps/ickerwx/keymap.c @@ -0,0 +1,242 @@ +#include "kitten_paw.h" +#include "mousekey.h" + +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define C(kc) LCTL(KC_##kc) +#define RA(kc) RALT(KC_##kc) +#define KC_SLCT KC_SELECT +#define MEDAPP LT(MEDIA, KC_APP) +#undef S +#define S(kc) LSFT(KC_##kc) + +uint8_t current_layer_global = 255; + +enum layers { + DEFAULT, + PROG1, + PROG2, + MEDIA, + MOUSE1, + MOUSE2, + MISC, +}; + +enum function_id { + LSHFT_PAREN, + RSHFT_PAREN, + LCTRL_BRACKET, + RCTRL_BRACKET, + LALT_CURLY, + RALT_CURLY, + CTRL_CLICK +}; + +enum macro_id { + GRV, + CFLEX +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DEFAULT] = KEYMAP(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + F(8),KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, F(9), KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ + F(1),KC_LGUI, F(3), LT(MISC, KC_SPC), F(4), F(5), MEDAPP, F(2), KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT), + /* Layer 1: Programming Layer 1, emulating US l ayout */ + [PROG1] = KEYMAP(\ + KC_ESC,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + M(GRV),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_SLSH, S(0),_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______, KC_Z,_______,_______,_______,_______, RA(8), RA(9),RA(MINS), _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,S(COMM),S(BSLS), _______, _______,_______,_______, \ + MO(PROG2),_______, KC_Y,_______,_______,_______,_______,_______,_______,_______,_______, S(7), MO(PROG2), _______, _______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______), + /* Layer 2: programming layer 2 + all keys that are not FN keys are sent as LSFT+key on this layer + */ + [PROG2] = KEYMAP(\ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + RA(RBRC),_______, RA(Q),KC_BSLS,_______,_______,M(CFLEX), S(6),S(RBRC), S(8), S(9),S(SLSH),KC_RBRC,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RA(7), RA(0),RA(NUBS), _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, S(DOT), S(2), _______, _______,_______,_______, \ + _______,S(NUBS),_______,_______,_______,_______,_______,_______,_______,KC_NUBS,S(NUBS),S(MINS), _______, _______, _______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______), + /* Layer 3: media layer */ + [MEDIA] = KEYMAP(\ + KC_PWR,KC_SLEP,KC_WAKE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX, \ + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_MPRV,KC_MPLY,KC_MNXT, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \ + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_VOLD,KC_MUTE,KC_VOLU, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \ + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX, \ + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, KC_EJCT, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \ + XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,_______,XXXXXXX, KC_MRWD,KC_MSTP,KC_MFFD, XXXXXXX,XXXXXXX), + /* Layer 4: Mouse layer */ + [MOUSE1] = KEYMAP(\ + F(6),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + _______,KC_ACL0,KC_ACL1,KC_ACL2,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,KC_BTN4,KC_WH_D,KC_MS_U,KC_WH_U,_______, C(Z),_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,KC_BTN5,KC_MS_L,KC_MS_D,KC_MS_R, F(7),KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,_______,_______, _______, _______,_______,_______, \ + MO(MOUSE2),_______, C(Y), C(X), C(C), C(V),_______,KC_BTN2,KC_BTN3,C(PGUP),C(PGDN),_______, KC_RSFT, _______, _______,_______,_______,_______, \ + KC_LCTL,_______,KC_LALT, KC_BTN1, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, _______,_______,_______, _______,_______), + /* Layer 5: Mouse layer 2*/ + [MOUSE2] = KEYMAP(\ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,KC_BTN2,KC_WH_U,KC_BTN3,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,KC_WH_L,KC_WH_D,KC_WH_R,_______,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,_______,_______, _______, _______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______), + /* Layer 6: Misc layer */ + [MISC] = KEYMAP(\ + _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, _______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,KC_SLCT, C(W), KC_UP,_______,_______,_______,_______,KC_BSPC, KC_DEL,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,KC_HOME,KC_PGDN,KC_PGUP,_______,_______,_______, _______, _______,_______,_______, \ + KC_LSFT,_______, C(Y), C(X), C(C), C(V), KC_SPC, KC_END,_______,C(PGUP),C(PGDN),_______, _______, _______, _______,_______,_______,_______, \ + _______,_______,_______, LT(MISC, KC_SPC), _______,_______,_______,_______, _______,_______,_______, _______,_______), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_TOGGLE(MOUSE1), // tap-toggle mouse layer (4) + [1] = ACTION_FUNCTION_TAP(LCTRL_BRACKET), // tap to print [ + [2] = ACTION_FUNCTION_TAP(RCTRL_BRACKET), // tap to print ] + [3] = ACTION_FUNCTION_TAP(LALT_CURLY), // tap to print { + [4] = ACTION_FUNCTION_TAP(RALT_CURLY), // tap to print } + [5] = ACTION_LAYER_TAP_TOGGLE(PROG1), // tap-toggle programming layer 1 + [6] = ACTION_LAYER_SET_CLEAR(DEFAULT), + [7] = ACTION_FUNCTION_TAP(CTRL_CLICK), + [8] = ACTION_FUNCTION_TAP(LSHFT_PAREN), // tap to print ( + [9] = ACTION_FUNCTION_TAP(RSHFT_PAREN), // tap to print ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case GRV: // macro to print accent grave + return (record->event.pressed ? + MACRO( D(LSFT), T(EQL), U(RALT), T(SPC), END) : + MACRO_NONE ); + case CFLEX: // print accent circonflex + return (record->event.pressed ? + MACRO( T(GRV), T(SPC), END ) : + MACRO_NONE ); + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + uint8_t layer; + layer = biton32(layer_state); + + if (current_layer_global != layer) { + current_layer_global = layer; + + // unset CAPSLOCK and SCROLL LOCK LEDs + led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_CAPS_LOCK)); + led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_SCROLL_LOCK)); + // set SCROLL LOCK LED when the mouse layer is active, CAPS LOCK when PROG layer is active + if (layer == MOUSE1 || layer == MOUSE2) { + led_set_kb(host_keyboard_leds() | (1<<USB_LED_SCROLL_LOCK)); + } else if (layer == PROG1 || layer == PROG2) { + led_set_kb(host_keyboard_leds() | (1<<USB_LED_CAPS_LOCK)); + } + } +} + +void led_set_user(uint8_t usb_led) { + +} + +void tap_helper(keyrecord_t *record, uint16_t orig_mod, uint16_t macro_mod, uint16_t macro_kc ) { + if (record->event.pressed) { + if (record->tap.count > 0 && !record->tap.interrupted) { + if (record->tap.interrupted) { + register_mods(MOD_BIT(orig_mod)); + } + } else { + register_mods(MOD_BIT(orig_mod)); + } + } else { + if (record->tap.count > 0 && !(record->tap.interrupted)) { + add_weak_mods(MOD_BIT(macro_mod)); + send_keyboard_report(); + register_code(macro_kc); + unregister_code(macro_kc); + del_weak_mods(MOD_BIT(macro_mod)); + send_keyboard_report(); + record->tap.count = 0; // ad hoc: cancel tap + } else { + unregister_mods(MOD_BIT(orig_mod)); + } + } +} + +/* if LCTRL is tabbed, print (, or ) if RCTRL is tabbed, same for LALT/RALT and [/] */ +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + // The code is copied from keymap_hasu.c in the tmk keyboards hhkb folder + switch (id) { + case LCTRL_BRACKET: + tap_helper(record, KC_LCTL, KC_RALT, KC_8); + break; + case RCTRL_BRACKET: + tap_helper(record, KC_RCTL, KC_RALT, KC_9); + break; + case LALT_CURLY: + tap_helper(record, KC_LALT, KC_RALT, KC_7); + break; + case RALT_CURLY: + tap_helper(record, KC_RALT, KC_RALT, KC_0); + break; + case LSHFT_PAREN: + tap_helper(record, KC_LSFT, KC_LSFT, KC_8); + break; + case RSHFT_PAREN: + tap_helper(record, KC_RSFT, KC_LSFT, KC_9); + break; + case CTRL_CLICK: + if (record->event.pressed) { + mousekey_clear(); + register_mods(MOD_BIT(KC_LCTL)); + send_keyboard_report(); + wait_ms(5); + mousekey_on(KC_BTN1); + mousekey_send(); + wait_ms(10); + mousekey_off(KC_BTN1); + mousekey_send(); + wait_ms(5); + unregister_mods(MOD_BIT(KC_LCTL)); + send_keyboard_report(); + } + break; + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint8_t layer; + layer = biton32(layer_state); + if (layer == PROG2) { + if (keycode >= KC_A && keycode <= KC_EXSEL && \ + !( // do not send LSFT + these keycodes, they are needed for emulating the US layout + keycode == KC_NONUS_BSLASH || + keycode == KC_RBRC || + keycode == KC_BSLS || + keycode == KC_GRV + )) { + // LSFT is the modifier for this layer, so we set LSFT for every key to get the expected behavior + if (record->event.pressed) { + register_mods(MOD_LSFT); + } else { + unregister_mods(MOD_LSFT); + } + } + } + return true; +} diff --git a/keyboards/kitten_paw/keymaps/ickerwx/readme.md b/keyboards/kitten_paw/keymaps/ickerwx/readme.md new file mode 100644 index 0000000000..0d23be4eac --- /dev/null +++ b/keyboards/kitten_paw/keymaps/ickerwx/readme.md @@ -0,0 +1,18 @@ +# My personal keymap for the Kitten Paw controller + +This keymap only works correctly when you have your OS configured with a German keymap. Use the keymap however you like. It's most likely a living thing that will never be quite finished. + +## Description of the layers +Layer 0 (DEFAULT) works just like you would expect a keyboard to work, mostly, except: +Caps Lock switches to the mouse layer, RGUI and APP are switches to the programming layer and media layer. +Mouse and programming layer switches can be held or double-tapped to lock. +Holding space switches to the MISC layer where I currently accumulate useful shortcuts. +Tapping left and right Shift, Ctrl and Alt will send (), [] and {} respectively. + +Layers 1 and 2 (PROG1 and PROG2) emulate the US layout while still using a German OS keymap setting. I was annoyed of having to change the OS settings every time I wanted to use the US layout for coding, so I made these layers to behave just like the US layout even though the OS still uses German. The shift keys were a bit tricky, I had to use them as MO(PROG2) switches, so to get the actual expected behavior I enable LSFT for almost every keypress on PROG2 in ```process_record_user```. Since the shift keys are MO() function keys, they do not print () at the moment, which sucks. I'm working on it. + +Layer 3 (MEDIA) just has a couple of media keys on it, mainly around the cursor keys and nav key cluster. + +Layers 4 and 5 (MOUSE1 and MOUSE2) are mouse layers. Move the cursor using ESDF, scroll using HJKL, Space for left click, N and M for right and middle click. There's more, look at the keymap. + +Layer 6 is a layer I don't have a good name for, so I call it MISC. You'll find cursor keys at ESDF, other navigation keys around the HJKL cluster and F12 to F24 on the F-keys. For now.
\ No newline at end of file diff --git a/keyboards/kitten_paw/kitten_paw.c b/keyboards/kitten_paw/kitten_paw.c new file mode 100644 index 0000000000..92f64b06b4 --- /dev/null +++ b/keyboards/kitten_paw/kitten_paw.c @@ -0,0 +1,43 @@ +#include "kitten_paw.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + CONFIG_LED_IO; + CONFIG_LED_IO; + print_dec(usb_led); + if (usb_led & (1<<USB_LED_CAPS_LOCK)) + USB_LED_CAPS_LOCK_ON; + else + USB_LED_CAPS_LOCK_OFF; + + if (usb_led & (1<<USB_LED_NUM_LOCK)) + USB_LED_NUM_LOCK_ON; + else + USB_LED_NUM_LOCK_OFF; + if (usb_led & (1<<USB_LED_SCROLL_LOCK)) + USB_LED_SCROLL_LOCK_ON; + else + USB_LED_SCROLL_LOCK_OFF; + led_set_user(usb_led); +} diff --git a/keyboards/kitten_paw/kitten_paw.h b/keyboards/kitten_paw/kitten_paw.h new file mode 100644 index 0000000000..189b721b93 --- /dev/null +++ b/keyboards/kitten_paw/kitten_paw.h @@ -0,0 +1,58 @@ +#ifndef KITTEN_PAW_H +#define KITTEN_PAW_H + +#include "quantum.h" + +#define CONFIG_LED_IO \ + DDRB |= (1<<7); \ + DDRC |= (1<<5) | (1<<6); + +#define USB_LED_CAPS_LOCK_ON PORTC &= ~(1<<6) +#define USB_LED_CAPS_LOCK_OFF PORTC |= (1<<6) +#define USB_LED_NUM_LOCK_ON PORTB &= ~(1<<7) +#define USB_LED_NUM_LOCK_OFF PORTB |= (1<<7) +#define USB_LED_SCROLL_LOCK_ON PORTC &= ~(1<<5) +#define USB_LED_SCROLL_LOCK_OFF PORTC |= (1<<5) + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +/* + Matrix col/row mapping + + ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. + | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 | + `----' `-------------------' `-------------------' `-------------------' `--------------' + ,-------------------------------------------------------------------------. ,--------------. ,-------------------. + | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 | + |-------------------------------------------------------------------------| |--------------| |-------------------| + | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 | + |-------------------------------------------------------------------------| '--------------' |-------------- | + | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | | + |-------------------------------------------------------------------------| ,----. |-------------------| + | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 | + |-------------------------------------------------------------------------| ,--------------. |-------------- | + | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | | + `-------------------------------------------------------------------------' `--------------' `-------------------' +*/ + +#define KEYMAP( \ + KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \ + KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \ + KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \ + KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \ + KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \ + KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \ +) \ +{ \ + {KC_NO, KB0, KC0, KD0,KC_NO, KF0, KG0,KC_NO,KC_NO,KC_NO, KK0, KL0,KC_NO,KC_NO, KO0,KC_NO, KQ0, KR0}, \ + { KA1, KB1,KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1,KC_NO,KC_NO,KC_NO,KC_NO, KQ1,KC_NO}, \ + {KC_NO, KB2,KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2,KC_NO, KN2,KC_NO, KP2, KQ2, KR2}, \ + {KC_NO, KB3,KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3,KC_NO, KQ3, KR3}, \ + { KA4, KB4,KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4,KC_NO,KC_NO, KO4,KC_NO, KQ4, KR4}, \ + { KA5,KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5,KC_NO,KC_NO, KO5,KC_NO, KQ5, KR5}, \ + {KC_NO, KB6, KC6,KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6,KC_NO,KC_NO, KO6,KC_NO, KQ6, KR6}, \ + { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7,KC_NO,KC_NO,KC_NO,KC_NO, KO7,KC_NO, KQ7, KR7} \ +} + +#endif diff --git a/keyboards/kitten_paw/matrix.c b/keyboards/kitten_paw/matrix.c new file mode 100644 index 0000000000..d436ad56ca --- /dev/null +++ b/keyboards/kitten_paw/matrix.c @@ -0,0 +1,165 @@ +/* + Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 +#endif +static uint8_t debouncing = DEBOUNCING_DELAY; + +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static uint8_t read_rows(void); +static void select_col(uint8_t col); + +inline uint8_t matrix_rows(void) { + return MATRIX_ROWS; +} + +inline uint8_t matrix_cols(void) { + return MATRIX_COLS; +} + +/* Column pin configuration + * + * col: 0 1 2 3 4 5 6 7 + * pin: PC7 PD5 PD3 PD1 PC2 PD6 PD4 PD2 + * + * Rrr pin configuration + * + * These rrrs uses one 74HC154 4 to 16 bit demultiplexer (low + * active), together with 2 rrrs driven directly from the micro + * controller, to control the 18 rrrs. The rrrs are driven from + * pins B6,5,4,3,2,1,0. + */ +void matrix_init(void) { + DDRC &= ~0b10000100; // Row input pins + DDRD &= ~0b01111110; + PORTC |= 0b10000100; + PORTD |= 0b01111110; + + DDRB |= 0b01111111; // Column output pins + + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + select_col(col); + _delay_us(3); + uint8_t rows = read_rows(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); + bool curr_bit = rows & (1<<row); + if (prev_bit != curr_bit) { + matrix_debouncing[row] ^= ((matrix_row_t)1<<col); + debouncing = DEBOUNCING_DELAY; + } + } + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } + else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + matrix_scan_quantum(); + return 1; +} + +bool matrix_is_modified(void) { + if (debouncing) + return false; + else + return true; +} + +inline bool matrix_is_on(uint8_t row, uint8_t col) { + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row))); + } +} + +uint8_t matrix_key_count(void) { + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop32(matrix[i]); + } + return count; +} + +static uint8_t read_rows(void) { + return + (PINC&(1<<7) ? 0 : (1<<0)) | + (PIND&(1<<5) ? 0 : (1<<1)) | + (PIND&(1<<3) ? 0 : (1<<2)) | + (PIND&(1<<1) ? 0 : (1<<3)) | + (PINC&(1<<2) ? 0 : (1<<4)) | + (PIND&(1<<2) ? 0 : (1<<5)) | + (PIND&(1<<4) ? 0 : (1<<6)) | + (PIND&(1<<6) ? 0 : (1<<7)); +} + +static void select_col(uint8_t col) { + switch (col) { + case 0: PORTB = (PORTB & ~0b01111111) | 0b01100100; break; + case 1: PORTB = (PORTB & ~0b01111111) | 0b01101100; break; + case 2: PORTB = (PORTB & ~0b01111111) | 0b01100010; break; + case 3: PORTB = (PORTB & ~0b01111111) | 0b01111010; break; + case 4: PORTB = (PORTB & ~0b01111111) | 0b01100110; break; + case 5: PORTB = (PORTB & ~0b01111111) | 0b01110110; break; + case 6: PORTB = (PORTB & ~0b01111111) | 0b01101110; break; + case 7: PORTB = (PORTB & ~0b01111111) | 0b01111110; break; + case 8: PORTB = (PORTB & ~0b01111111) | 0b01000001; break; + case 9: PORTB = (PORTB & ~0b01111111) | 0b00100001; break; + case 10: PORTB = (PORTB & ~0b01111111) | 0b01101010; break; + case 11: PORTB = (PORTB & ~0b01111111) | 0b01110010; break; + case 12: PORTB = (PORTB & ~0b01111111) | 0b01111100; break; + case 13: PORTB = (PORTB & ~0b01111111) | 0b01110100; break; + case 14: PORTB = (PORTB & ~0b01111111) | 0b01111000; break; + case 15: PORTB = (PORTB & ~0b01111111) | 0b01110000; break; + case 16: PORTB = (PORTB & ~0b01111111) | 0b01100000; break; + case 17: PORTB = (PORTB & ~0b01111111) | 0b01101000; break; + } +} diff --git a/keyboards/kitten_paw/readme.md b/keyboards/kitten_paw/readme.md new file mode 100644 index 0000000000..a6ef2a0672 --- /dev/null +++ b/keyboards/kitten_paw/readme.md @@ -0,0 +1,32 @@ +kitten_paw keyboard firmware +====================== +This is the firmware for the 2016 revision of the Kitten Paw controller by Bathroom Epiphanies. +Most of the boilerplate code is the work of [BathroomEpiphanies](https://github.com/BathroomEpiphanies). + +NKRO doesn't work at the moment, I don't know if I will take the time to find out how to fix this, so far 6KRO is enough for me. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/kitten_paw folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: + +``` +$ make keymap=[default|jack|<name>] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/kitten_paw/rules.mk b/keyboards/kitten_paw/rules.mk new file mode 100644 index 0000000000..b0c909d11f --- /dev/null +++ b/keyboards/kitten_paw/rules.mk @@ -0,0 +1,72 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 + OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +CUSTOM_MATRIX = yes +SRC += matrix.c diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile index b9f07636be..4e2a6f00fd 100644 --- a/keyboards/lets_split/Makefile +++ b/keyboards/lets_split/Makefile @@ -1,78 +1,3 @@ -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= yes # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -CUSTOM_MATRIX = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/lets_split/pro_micro.h b/keyboards/lets_split/pro_micro.h index 09e219b7b1..f9e7ed75d9 100644 --- a/keyboards/lets_split/pro_micro.h +++ b/keyboards/lets_split/pro_micro.h @@ -111,18 +111,18 @@ static const uint8_t SCK = 15; // Mapping of analog pins as digital I/O // A6-A11 share with digital pins -static const uint8_t A0 = 18; -static const uint8_t A1 = 19; -static const uint8_t A2 = 20; -static const uint8_t A3 = 21; -static const uint8_t A4 = 22; -static const uint8_t A5 = 23; -static const uint8_t A6 = 24; // D4 -static const uint8_t A7 = 25; // D6 -static const uint8_t A8 = 26; // D8 -static const uint8_t A9 = 27; // D9 -static const uint8_t A10 = 28; // D10 -static const uint8_t A11 = 29; // D12 +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24; // D4 +static const uint8_t ADC7 = 25; // D6 +static const uint8_t ADC8 = 26; // D8 +static const uint8_t ADC9 = 27; // D9 +static const uint8_t ADC10 = 28; // D10 +static const uint8_t ADC11 = 29; // D12 #define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) #define digitalPinToPCICRbit(p) 0 @@ -220,26 +220,26 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = { PC, // D5 - PC6 PD, // D6 - PD7 PE, // D7 - PE6 - + PB, // D8 - PB4 PB, // D9 - PB5 PB, // D10 - PB6 PB, // D11 - PB7 PD, // D12 - PD6 PC, // D13 - PC7 - + PB, // D14 - MISO - PB3 PB, // D15 - SCK - PB1 PB, // D16 - MOSI - PB2 PB, // D17 - SS - PB0 - + PF, // D18 - A0 - PF7 PF, // D19 - A1 - PF6 PF, // D20 - A2 - PF5 PF, // D21 - A3 - PF4 PF, // D22 - A4 - PF1 PF, // D23 - A5 - PF0 - + PD, // D24 - PD5 PD, // D25 / D6 - A7 - PD7 PB, // D26 / D8 - A8 - PB4 @@ -257,26 +257,26 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { _BV(6), // D5 - PC6 _BV(7), // D6 - PD7 _BV(6), // D7 - PE6 - + _BV(4), // D8 - PB4 _BV(5), // D9 - PB5 _BV(6), // D10 - PB6 _BV(7), // D11 - PB7 _BV(6), // D12 - PD6 _BV(7), // D13 - PC7 - + _BV(3), // D14 - MISO - PB3 _BV(1), // D15 - SCK - PB1 _BV(2), // D16 - MOSI - PB2 _BV(0), // D17 - SS - PB0 - + _BV(7), // D18 - A0 - PF7 _BV(6), // D19 - A1 - PF6 _BV(5), // D20 - A2 - PF5 _BV(4), // D21 - A3 - PF4 _BV(1), // D22 - A4 - PF1 _BV(0), // D23 - A5 - PF0 - + _BV(5), // D24 - PD5 _BV(7), // D25 / D6 - A7 - PD7 _BV(4), // D26 / D8 - A8 - PB4 @@ -286,24 +286,24 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { }; const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, + NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, TIMER0B, /* 3 */ NOT_ON_TIMER, TIMER3A, /* 5 */ TIMER4D, /* 6 */ - NOT_ON_TIMER, - - NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, TIMER1A, /* 9 */ TIMER1B, /* 10 */ TIMER0A, /* 11 */ - - NOT_ON_TIMER, + + NOT_ON_TIMER, TIMER4A, /* 13 */ - - NOT_ON_TIMER, + + NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, @@ -324,11 +324,11 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { 7, // A0 PF7 ADC7 - 6, // A1 PF6 ADC6 - 5, // A2 PF5 ADC5 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 4, // A3 PF4 ADC4 - 1, // A4 PF1 ADC1 - 0, // A5 PF0 ADC0 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 8, // A6 D4 PD4 ADC8 10, // A7 D6 PD7 ADC10 11, // A8 D8 PB4 ADC11 diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk new file mode 100644 index 0000000000..6961fbd556 --- /dev/null +++ b/keyboards/lets_split/rules.mk @@ -0,0 +1,74 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= yes # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes
\ No newline at end of file diff --git a/keyboards/phantom/Makefile b/keyboards/phantom/Makefile index 3a71fd0ee3..4e2a6f00fd 100644 --- a/keyboards/phantom/Makefile +++ b/keyboards/phantom/Makefile @@ -1,74 +1,3 @@ - - -SRC = led.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/phantom/keymaps/xyverz/keymap.c b/keyboards/phantom/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..4a15226386 --- /dev/null +++ b/keyboards/phantom/keymaps/xyverz/keymap.c @@ -0,0 +1,104 @@ +#include "phantom.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _DV 1 +#define _CM 2 +#define _FL 3 + +// Macro name shortcuts +#define QWERTY M(_QW) +#define DVORAK M(_DV) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QW] = { /* Layer 0: Qwerty */ + {KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS}, + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN}, + {KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX}, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX}, + {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT} + }, + +[_DV] = { /* Layer 1: Dvorak */ + {KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS}, + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP}, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DEL, KC_END, KC_PGDN}, + {KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX}, + {KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX}, + {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT} + }, + +[_CM] = { /* Layer 2: Colemak */ + {KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS}, + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN}, + {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX}, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX}, + {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT} + }, + +[_FL] = { /* Layer 3: Functions */ + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, RESET, KC_MPRV, KC_MPLY, KC_MNXT}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX}, + {_______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX}, + {QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, _______}, + }, + + +}; + +enum function_id { + SHIFT_ESC, +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/clueboard2/Makefile b/keyboards/phantom/rules.mk index e9367a90d0..c6b8ca6c35 100644 --- a/keyboards/clueboard2/Makefile +++ b/keyboards/phantom/rules.mk @@ -1,5 +1,7 @@ +SRC = led.c + # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -59,13 +61,9 @@ EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= yes # Console for debug(+400) COMMAND_ENABLE ?= yes # Commands for debug and configuration NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150) MIDI_ENABLE ?= no # MIDI controls AUDIO_ENABLE ?= no UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR - include ../../Makefile -endif diff --git a/keyboards/planck/Makefile b/keyboards/planck/Makefile index 23944f92ea..7d49c5ef96 100644 --- a/keyboards/planck/Makefile +++ b/keyboards/planck/Makefile @@ -1,74 +1,5 @@ - SUBPROJECT_DEFAULT = rev4 -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/bone2planck/config.h b/keyboards/planck/keymaps/bone2planck/config.h new file mode 100644 index 0000000000..60aff6db0d --- /dev/null +++ b/keyboards/planck/keymaps/bone2planck/config.h @@ -0,0 +1,7 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H +#endif + +#include "../../config.h" + +#define PREVENT_STUCK_MODIFIERS
\ No newline at end of file diff --git a/keyboards/planck/keymaps/bone2planck/keymap.c b/keyboards/planck/keymaps/bone2planck/keymap.c index 66cf9386df..69d164b8c7 100644 --- a/keyboards/planck/keymaps/bone2planck/keymap.c +++ b/keyboards/planck/keymaps/bone2planck/keymap.c @@ -4,6 +4,13 @@ #endif #include "keymap_german.h" +// for intellisense, has to be commented for building +/* +#include "..\..\..\..\quantum\keymap_extras\keymap_german.h" +#include "..\..\..\..\quantum\keymap_common.h" +#include "..\..\..\..\tmk_core\common\keycode.h" +*/ + #define _______ KC_TRNS /* This Layout tries to emulate the Bone2 Variant of Neo2, and is intended to be used with a German QWERTZ Softwarelayout. @@ -24,14 +31,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| F | V | Ü | Ä | Ö | Y | Z | , | . | K |Shift | * |------+------+------+------+------+------+------+------+------+------+------+------| -* | GUI | Ctrl | Alt | M4 | M2 | Space | M2 | M4 | | Ctrl | Esc | +* | Ctrl | GUI | Alt | M4 | M2 | Space | M2 | M4 | Alt | Esc | Ctrl | * `-----------------------------------------------------------------------------------' */ [0] = { - { DE_Q, DE_J, DE_D, DE_U, DE_A, DE_X, DE_P, DE_H, DE_L, DE_M, DE_W, DE_SS }, - { LT(1,KC_TAB), DE_C, DE_T, DE_I, DE_E, DE_O, DE_B, DE_N, DE_R, DE_S, DE_G, LT(1,KC_ENT) }, - { KC_LSFT, DE_F, DE_V, DE_UE, DE_AE, DE_OE, DE_Y, DE_Z, DE_COMM, DE_DOT, DE_K, KC_LSFT }, - { KC_LGUI, KC_LCTL, KC_LALT, MO(4), MO(2), KC_SPC, KC_SPC, MO(2), MO(4), KC_NO, KC_RCTL, KC_ESC } + { DE_Q, DE_J, DE_D, DE_U, DE_A, DE_X, DE_P, DE_H, DE_L, DE_M, DE_W, DE_SS }, + { LT(1,KC_TAB), DE_C, DE_T, DE_I, DE_E, DE_O, DE_B, DE_N, DE_R, DE_S, DE_G, LT(1,KC_ENT) }, + { KC_LSFT, DE_F, DE_V, DE_UE, DE_AE, DE_OE, DE_Y, DE_Z, DE_COMM, DE_DOT, DE_K, KC_LSFT }, + { KC_LCTL, KC_RGUI, KC_LALT, MO(4), MO(2), KC_SPC, KC_SPC, MO(2), MO(4), KC_RALT, KC_ESC, KC_RCTL } }, /* M1 Special Characters @@ -43,7 +50,7 @@ very ergonomic placement for coding * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| # | $ | | | ~ | € | + | % | " | ' | ; |Shift | * |------+------+------+------+------+------+------+------+------+------+------+------| -* | GUI | Ctrl | Alt | M4 | M2 | Space | M2 | M4 | | Ctrl | Esc | +* | Ctrl | GUI | Alt | M4 | M2 | Space | M2 | M4 | Alt | Esc | Ctrl | * `-----------------------------------------------------------------------------------' */ [1] = { @@ -56,37 +63,37 @@ very ergonomic placement for coding /* Navigation & Number Blocks very easy to get used to & intuituve placement * ,-----------------------------------------------------------------------------------. -* | | PgUp | Bksp | Up | DEL | PgDn | | 7 | 8 | 9 | | | +* | | PgUp | Bksp | Up | DEL | PgDn | | 7 | 8 | 9 | | Ins | * |------+------+------+------+------+-------------+------+------+------+------+------| * | Tab | Home | Lft | Down | Right| End | . | 4 | 5 | 6 | , | Enter| * |------+------+------+------+------+------|------+------+------+------+------+------| -* | Shift| | Tab | Ins | Enter| | 0 | 1 | 2 | 3 | ; |Shift | +* | Shift| | Tab | | Enter| | 0 | 1 | 2 | 3 | ; |Shift | * |------+------+------+------+------+------+------+------+------+------+------+------| -* | GUI | Ctrl | Alt | M3 | M2 | Space | M2 | M3 | | Ctrl | Esc | +* | Ctrl | GUI | Alt | M3 | M2 | Space | M2 | M3 | Alt | Esc | Ctrl | * `-----------------------------------------------------------------------------------' */ [2] = { - { KC_NO, KC_PGUP, KC_BSPC, KC_UP, KC_DEL, KC_PGDN, KC_NO, DE_7, DE_8, DE_9, KC_NO, KC_NO }, + { KC_NO, KC_PGUP, KC_BSPC, KC_UP, KC_DEL, KC_PGDN, KC_NO, DE_7, DE_8, DE_9, KC_NO, KC_INS }, { KC_TAB, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, DE_DOT, DE_4, DE_5, DE_6, DE_COMM, KC_ENT }, - { _______, KC_NO, KC_TAB, KC_INS, KC_ENT, KC_NO, DE_0, DE_1, DE_2, DE_3, DE_SCLN, _______ }, + { _______, KC_NO, KC_TAB, KC_NO, KC_ENT, KC_NO, DE_0, DE_1, DE_2, DE_3, DE_SCLN, _______ }, { _______, _______, _______, MO(3), _______, _______, _______, _______, MO(3), _______, _______, _______ } }, /* Flipped Navigation & Number Blocks for one handed use accessed by sliding from M2 to M3 with thumb * ,-----------------------------------------------------------------------------------. -* | | | 7 | 8 | 9 | | PgUp | Bksp | Up | DEL | PgDn | | +* | Ins | | 7 | 8 | 9 | | PgUp | Bksp | Up | DEL | PgDn | | * |------+------+------+------+------+-------------+------+------+------+------+------| * | Tab | . | 4 | 5 | 6 | , | Home | Left | Down | Right| End | Enter| * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| 0 | 1 | 2 | 3 | ; | | Tab | Ins | Enter| |Shift | * |------+------+------+------+------+------+------+------+------+------+------+------| -* | GUI | Ctrl | Alt | M3 | | Space | | M3 | | Ctrl | Esc | +* | Ctrl | GUI | Alt | M3 | | Space | | M3 | Alt | Esc | Ctrl | * `-----------------------------------------------------------------------------------' */ [3] = { - { KC_NO, KC_NO, DE_7, DE_8, DE_9, KC_NO, KC_PGUP, KC_BSPC, KC_UP, KC_DEL, KC_PGDN, KC_NO }, + { KC_INS, KC_NO, DE_7, DE_8, DE_9, KC_NO, KC_PGUP, KC_BSPC, KC_UP, KC_DEL, KC_PGDN, KC_NO }, { _______, DE_DOT, DE_4, DE_5, DE_6, DE_COMM, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, _______ }, { _______, DE_0, DE_1, DE_2, DE_3, DE_SCLN, KC_NO, KC_TAB, KC_INS, KC_ENT, KC_NO, _______ }, { _______, _______, _______, _______, KC_NO, _______, _______, KC_NO, _______, _______, _______, _______ } @@ -102,7 +109,7 @@ slide from m4 to m5 to access flipped version * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| | Prev | Play | Next | | ² | F1 | F2 | F3 | F10 |Shift | * |------+------+------+------+------+------+------+------+------+------+------+------| -* | GUI | Ctrl | Alt | M4 | M5 | Space | M5 | M4 | | Ctrl | Esc | +* | Ctrl | GUI | Alt | M4 | M5 | Space | M5 | M4 | Alt | Esc | Ctrl | * `-----------------------------------------------------------------------------------' */ [4] = { @@ -115,19 +122,19 @@ slide from m4 to m5 to access flipped version /* flipped Function & Media Keys * ,-----------------------------------------------------------------------------------. -* | | | F7 | F8 | F9 | | | Print|Scroll| Pause| | | +* | | | F7 | F8 | F9 | F12 | | Print|Scroll| Pause| | | * |------+------+------+------+------+-------------+------+------+------+------+------| -* | | ³ | F4 | F5 | F6 | | | Mute | Vol- | Vol+ | | | +* | | ³ | F4 | F5 | F6 | F11 | | Mute | Vol- | Vol+ | | | * |------+------+------+------+------+------|------+------+------+------+------+------| -* | Shift| ² | F1 | F2 | F3 | | | Prev | Play | Next | |Shift | +* | Shift| ² | F1 | F2 | F3 | F10 | | Prev | Play | Next | |Shift | * |------+------+------+------+------+------+------+------+------+------+------+------| -* | GUI | Ctrl | Alt | | M5 | Space | M5 | | | Ctrl | Esc | +* | Ctrl | GUI | Alt | | M5 | Space | M5 | | Alt | Esc | Ctrl | * `-----------------------------------------------------------------------------------' */ [5] = { - { KC_NO, KC_NO, KC_F7, KC_F8, KC_F9, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_NO, KC_NO }, - { KC_NO, DE_SQ3, KC_F4, KC_F5, KC_F6, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO }, - { _______, DE_SQ2, KC_F1, KC_F2, KC_F3, KC_NO, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, _______ }, + { KC_NO, KC_NO, KC_F7, KC_F8, KC_F9, KC_F12, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_NO, KC_NO }, + { KC_NO, DE_SQ3, KC_F4, KC_F5, KC_F6, KC_F11, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO }, + { _______, DE_SQ2, KC_F1, KC_F2, KC_F3, KC_F10, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, _______ }, { _______, _______, _______, KC_NO, _______, _______, _______, _______, KC_NO, _______, _______, _______ } } }; diff --git a/keyboards/planck/keymaps/bone2planck/readme.md b/keyboards/planck/keymaps/bone2planck/readme.md new file mode 100644 index 0000000000..3c425efddb --- /dev/null +++ b/keyboards/planck/keymaps/bone2planck/readme.md @@ -0,0 +1,8 @@ +check keymap.c to the layers + +This Layout tries to emulate the Bone2 Variant of Neo2, and is intended to be used with a German QWERTZ Softwarelayout. +It has "üäöß" as it is optimized for a mix of German & English. +My favourite features are the placement of the special characters often used for programming right on the home row +and the number & navigation block combo, so you never have to move your hands from their home position. + +Bone2 wiki page: http://wiki.neo-layout.org/wiki/Bone
\ No newline at end of file diff --git a/keyboards/planck/keymaps/callum/keymap.c b/keyboards/planck/keymaps/callum/keymap.c index a747dcb159..6c34311339 100644 --- a/keyboards/planck/keymaps/callum/keymap.c +++ b/keyboards/planck/keymaps/callum/keymap.c @@ -20,7 +20,8 @@ enum planck_keycodes { BASE = SAFE_RANGE, MOVE, SYMB, - FUNC + FUNC, + LOCK }; // Fillers to make layering more clear @@ -37,14 +38,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Z | X | C | V | B | K | M | , | . | / |Shift | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Func | GUI | Alt | Ctrl | Symb |Enter |Space | Move | GUI | Alt | Ctrl |Caps | + * | Func | Ctrl | Alt | GUI | Symb |Enter |Space | Move | GUI | Alt | Ctrl |Caps | * `-----------------------------------------------------------------------------------' */ [_BASE] = { {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_MINS}, {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, - {FUNC, KC_LGUI, KC_LALT, KC_LCTL, SYMB, KC_ENT, KC_SPC, MOVE, KC_RGUI, KC_RALT, KC_RCTL, KC_CAPS} + {FUNC, KC_LCTL, KC_LALT, KC_LGUI, SYMB, KC_ENT, KC_SPC, MOVE, KC_RGUI, KC_RALT, KC_RCTL, KC_CAPS} }, /* MOVE @@ -71,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------------------------------------------------------------------------------. * | Del | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | ~ | | | + | [ | { | } | ] | = | \ | ` | | + * | | ~ | ` | + | = | | | \ | [ | ] | { | } | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' @@ -79,7 +80,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_SYMB] = { {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_ESC }, {KC_DEL, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, - {_______, KC_TILD, KC_PIPE, KC_PLUS, KC_LBRC, KC_LCBR, KC_RCBR, KC_RBRC, KC_EQL, KC_BSLS, KC_GRV, _______}, + {_______, KC_TILD, KC_GRV, KC_PLUS, KC_EQL, KC_PIPE, KC_BSLS, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, @@ -87,7 +88,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * | F12 | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | * |-----------------------------------------------------------------------------------. - * | | Play | Prev | Next | BL+ | | | | | | | | + * | | Play | Prev | Next | BL+ | | | Lock | | | | | * |------+------+------+------+------+------|------+------+------+------+------+------| * | | Mute | Vol- | Vol+ | BL- | | | | | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -96,7 +97,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_FUNC] = { {KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11 }, - {_______, KC_MPLY, KC_MPRV, KC_MNXT, KC_PAUS, _______, _______, _______, _______, _______, _______, _______}, + {_______, KC_MPLY, KC_MPRV, KC_MNXT, KC_PAUS, _______, _______, LOCK, _______, _______, _______, _______}, {_______, KC_MUTE, KC_VOLD, KC_VOLU, KC_SLCK, _______, _______, _______, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET } } @@ -133,6 +134,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; + case LOCK: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + } else { + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; } return true; } diff --git a/keyboards/planck/keymaps/callum/readme.md b/keyboards/planck/keymaps/callum/readme.md index d4f3449f15..b70de3f1e2 100644 --- a/keyboards/planck/keymaps/callum/readme.md +++ b/keyboards/planck/keymaps/callum/readme.md @@ -1,25 +1,20 @@ # callum’s planck layout -This is a layout for the grid planck, built with a few ideals in mind. These ideals are just my opinion mind! The great thing about *qmk* is that we can all afford to have different opinions about what makes a good layout: +This is a layout for the grid planck, built with a few ideals in mind: -- Minimal response times should be maintained. i.e. keys that react differently depending on whether they are tapped or held, keys that react differently if they are double tapped, etc. should be avoided --- since they inevitably send their keycode later than a normal key, interrupting the immediate feedback from the screen. Therefore we restrict ourselves to chording. +- Minimal response times should be maintained. i.e. keys that react differently depending on whether they are tapped or held, keys that react differently if they are double tapped, etc. should be avoided — they inevitably send their keycode later than a normal key, interrupting the immediate feedback from the screen. Therefore we restrict ourselves to chording. - The hands should never need to leave the home position. The usual culprit for this is the arrow cluster, so the arrow cluster should be as close to home as possible. -- There should be two of every modifier (one on each side), since otherwise certain long key combinations become hard to make. -- Backspace should be in the “capslock position†as God intended. -- The keyboard should be usable without any firmware changes on any operating system. In my case that means it should work on *Windows* and *Linux* without any software modifications, while I can change the behaviour slightly on *macOS* in software since that’s my home OS. The images reflect the intended use on *macOS* **after** minor software tweaks; which will be noted. +- There should be two of every modifier (one on each side), otherwise certain long key combinations become hard to make. +- Backspace should be in the “capslock position†in the colemak tradition. We have four layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster etc, a `SYMB` layer, with numbers and symbols; and a `FUNC` layer, with function keys and media keys. ## The `BASE` layer - + This is the default layer; in [colemak](https://colemak.com). `esc` and `del` are conspicuously absent but are especially easy to reach from either of the other main layers (see below). The `backspace` location is standard colemak. The `caps` key is still on the `BASE` layer but only because I don’t really use the bottom corners so there’s nothing else I would rather put there. Having `enter` on a thumb means I can still have `quote` immediately to the right of `O`, something that would have annoyed me endlessly otherwise. `minus` is in the upper right because I had an extra space and it’s probably my next most used key that didn’t yet have a home. -The `MOVE` and `SYMB` layers are reached by holding down the `move` and `symb` keys respectively. The `FUNC` layer is reached by holding down both the `move` and `symb` keys simultaneosly, *or* by holding down the `fn` key. The intended use is that whenever both hands are on the keyboard, the former method is used, and the latter is only used when, for example, reaching over to the keyboard with one hand to access the media controls. - -The `ctrl`, `alt`, `cmd` cluster is asymmetric around the centre so that at least one of each of the modifiers can be reached with the thumbs. The intended use is to always hit the left `cmd` and the right `ctrl`, unless an awkward key combination dictates otherwise. - -In firmware `ctrl` and `cmd`/`GUI` are swapped with respect to the image above --- I swap them to the illustrated location when using *macOS* and leave them be for *Windows* and *Linux*. (so that `cmd-z,x,c,v,...` becomes `ctrl-z,x,c,v,...` saving me some confusion) +The `MOVE` and `SYMB` layers are reached by holding down the `move` and `symb` keys respectively. The `FUNC` layer is reached by holding down both the `move` and `symb` keys simultaneously, *or* by holding down the `fn` key. The intended use is that whenever both hands are on the keyboard, the former method is used, and the latter is only used when, for example, reaching over to the keyboard with one hand to access the media controls. ## The `MOVE` layer  @@ -31,18 +26,18 @@ On *macOS* I recommend using [Karabiner](https://pqrs.org/osx/karabiner/) and ti None of the modifiers are overwritten so that `shift-alt-arrows` etc work as expected. ## The `SYMB` layer - + -The symbol layer has all the numbers and their usual corresponding symbols in the first two rows, with the symbols on the home row since I use them more frequently than the numbers. The third row contains all the remaining symbols, with brackets in the centre; then normally shifted symbols to the left, and non shifted to the right, in order of most to least used. +The symbol layer has all the numbers and their usual corresponding symbols in the first two rows, with the symbols on the home row since I use them more frequently than the numbers. The third row contains all the remaining symbols, arranged roughly so that the most used symbols are accessible with the strongest fingers. `esc` and `del` are repeated here since I wanted to be able to reach either, one handed, with either hand. Again none of the modifiers are overwritten so that shortcuts involving numbers or symbols work as expected. ## The `FUNC` layer - + -The only thing of note here is that `bl+` and `bl-` are short for *backlight up* and *backlight down* respectively, and in firmware are actually `KC_PAUS` and `KC_SLCK` respectively, since *macOS* interprets these as the backlight keys. +The only things of note here are that `bl+` and `bl-` are short for *backlight up* and *backlight down*, and in firmware are actually `KC_PAUS` and `KC_SLCK` respectively, since *macOS* interprets these as the backlight keys. And that `lock` is currently a macro hard coded to turn off the screen on *macOS*. (By activating the shortcut `shift-ctrl-power`.) ## Other changes from the default -I have LEDs and sound disabled, simply because I have no need of them.
\ No newline at end of file +I have LEDs and sound disabled, simply because I have no need of them. diff --git a/keyboards/planck/keymaps/cbbrowne/config.h b/keyboards/planck/keymaps/cbbrowne/config.h index 2d3df59bd2..58cd2cc5bc 100644 --- a/keyboards/planck/keymaps/cbbrowne/config.h +++ b/keyboards/planck/keymaps/cbbrowne/config.h @@ -9,6 +9,11 @@ #define randmul 181 #define randmod 167 +/* Filler to make layering a bit clearer * + * borrowed from basic keymap */ + +#define _______ KC_TRNS + #endif diff --git a/keyboards/planck/keymaps/cbbrowne/keymap.c b/keyboards/planck/keymaps/cbbrowne/keymap.c index 70eaefb7be..898f6f0e0a 100644 --- a/keyboards/planck/keymaps/cbbrowne/keymap.c +++ b/keyboards/planck/keymaps/cbbrowne/keymap.c @@ -1,6 +1,6 @@ #include "planck.h" #ifdef BACKLIGHT_ENABLE - #include "backlight.h" +#include "backlight.h" #endif #include "config.h" #include "quantum.h" @@ -84,21 +84,22 @@ enum macro_id { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QW] = { /* Qwerty */ {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MT(MOD_RSFT, KC_ENT)}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT }, {KC_TAB, M(M_LED), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + /* Note that KC_SPC is recorded TWICE, so that either matrix position can activate it */ }, [_RS] = { /* RAISE */ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, - {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [_LW] = { /* LOWER */ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, - {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, KC_TRNS}, - {KC_TRNS, DF(_KP), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, _______}, + {_______, DF(_KP), _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [_KP] = { /* Key Pad */ {KC_ESC, M(M_USERNAME), M(M_VERSION), KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC}, @@ -108,6 +109,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { } }; +/* What is fn_actions actually used for??? */ const uint16_t PROGMEM fn_actions[] = { }; diff --git a/keyboards/planck/keymaps/cbbrowne/readme.md b/keyboards/planck/keymaps/cbbrowne/readme.md index c676dd2c1c..51979f6300 100644 --- a/keyboards/planck/keymaps/cbbrowne/readme.md +++ b/keyboards/planck/keymaps/cbbrowne/readme.md @@ -7,16 +7,10 @@ Christopher Browne This was originally based on the default keyboard map, but I have been doing sundry experimentation: -1. Experiments +1. Useful Experiments ---------------------------------------- - * To figure things out about the toolset - * I'm an Emacs guy, so will be needing a fair bit of tuning * It made sense to mess around some with keyboard maps. - - I tried added Workman alongside Dvorak and Colemak - - Boy, oh boy, these don't help!!! - - I have done 30 years of learning of Emacs key mappings, and - these alternative keyboards massively mess me up - I added a keypad, originally based on keymaps/numpad.c, but mighty substantially revised, as that one seems to be rotated 90 degrees from usual conventions for number pads @@ -30,6 +24,7 @@ doing sundry experimentation: - Key [2][2] aka "a" uses a random number generator to select a digit 0-9 at random - Key [3][2] aka "z" uses a random number generator to select a letter a-z at random - Key [1][3] aka "e" spits out the keymap version number + * Minor use of Space Cadet Shift; my SHIFT key has switched to KC_LSP0, so that when I just hit SHIFT, I get a left parens: ( which is great for Lisping. I don't have a Right Shift, so I don't get an autoclose; I think I'll live with that until a Planck successor with more lines of keys :-) 2. Some code structure ideas --------------------------------------------------- @@ -62,3 +57,24 @@ doing sundry experimentation: and shift ESC off the first column so KC_LCTL and KC_LALT can be on the first column. * I needed to swap ' and ENTER + * I tried added Workman alongside Dvorak and Colemak + - Boy, oh boy, these don't help!!! + - I have done 30 years of learning of Emacs key mappings, and + these alternative keyboards massively mess me up + +4. TODO +--------------------------------------------------------- + + * I use tmux quite a lot; the mollat keymap seems to have some + interesting helpers. It might be interesting to add a "tmux + layer," or to have a few keys in a layer oriented towards that + * The mollat tmux layer also suggests some thoughts about Emacs + helpers. + * I do not presently have anything that handles X11 screen + switching, as with Control-Alt-various + * I ought to probably look into KC_LEAD, to have some key combos + that do not need to be concurrent + * The jeebak keymap seems to have some neat ideas: + - Number layer which is aggressive about having numbers in several places + - Touch layer seems interesting + * Trying out sgoodwin's "hold Enter down to get Shift"
\ No newline at end of file diff --git a/keyboards/planck/keymaps/circuit/Makefile b/keyboards/planck/keymaps/circuit/Makefile new file mode 100644 index 0000000000..1ed0ff9568 --- /dev/null +++ b/keyboards/planck/keymaps/circuit/Makefile @@ -0,0 +1,25 @@ + +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +TAP_DANCE_ENABLE = yes # Enables the double-tap functionality of keys + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/circuit/Readme.md b/keyboards/planck/keymaps/circuit/Readme.md new file mode 100644 index 0000000000..cbdf5de4e5 --- /dev/null +++ b/keyboards/planck/keymaps/circuit/Readme.md @@ -0,0 +1,44 @@ +##Design goals: +1. Arrow keys always available. +2. As close to a to my US layout 107-key QWERTY keyboard as I could manage, (i.e. as few arbitrary decisions as possible). +3. Togglable DVORAK keyboard. +4. most frequently used things in the easiest to reach places. +5. Ability to game on it, just for fun. + +My layout differs from most in the placement the ARROW keys, `ESC`, VOL keys, use of double-tap `CAPS`, and the GAME LOCK function. + +I put the layer buttons in the usual spots. I originally wanted only function/symbols layer, but that proved detrimental. I use some timed press actions to save some space, but this has been accounted for, (see GAME LOCK below). I'm not fully satisfied with the current product (see NOTES below), so it may change in the future. + +##Effective layers: +* Default later is obviously your letters and modifiers. +* Lower layer [NUMBER] is your numbers and punctuation. +* Upper layer [ACTION] is your symbols and actions. +* Function layer is the infrequently used function keys, layout toggle, game lock, and reset. + +There is also a toggle for the DVORAK/QWERTY layers, but in normal typing this is not of concern. + +###Special keys: +* `RSHFT` and `ENTER` are combined. Tap once for `ENTER` and hold for `RSHFT`. `ENTER` will be registered on release if released within 200 ms, else `RSHFT` is registered starting at 201 ms until release. +* If for some reason, this interferes with the normal usage of the `ENTER` key in any way, (some problem that may never happen), I have added a regular non-modified `ENTER` key on the same key in the [ACTION] layer. +* `LSHFT` and `CAPS` are also combined. The key works like a normal `LSHFT` unless double-tapped, in which case it counts as `CAPS`. This functionality unfortunately delays all key presses by at most 200 ms, but I have added ways to disable this both temporarily or permanently, described below. +* A failsafe `CAPS` key is on the same key in the [ACTION] layer. +* There are `UNDO`, `CUT`, `COPY`, and `PASTE` keys. This was intended to be a universal way to use these commands since in macOS cut is `⌘ + C` but in Windows it is `⌃ + C`. Unfortunately these special keys only work in Windows. ¯\\\_(ツ)\_/¯ + +##Game lock: +**TL;DR** the game lock toggle disables the double-tap `CAPS`, and disables `GUI` keys (WINDOWS key). + +I wished for this keyboard to be fully usable in the most demanding of games. The most demanding game I know of is ARMA 3 which has a binding to practically every individual key of a 107-key keyboard. This means I need to have pretty much every key possible somewhere. I also wanted the keyboard to be responsive in games for every critical keypress. This means having a way to disable features that introduce an inherent delay to registering keys, such as double-tap. + +I do not expect to see this used by the pros, but I enjoyed making it. As for use in ARMA 3, I got a little ways into the APEX campaign, but I found a few flaws. For Example, I cannot enable my HUD GPS since that requires `RCTRL`+`M` but `RCTRL` is not bound. The obvious fix is to rebind the action to a new key, but I still take this as a shortcoming of my layout. + +###If you wish to disable double-tap +####Disable it temporarily +Turn on the game lock. While on, it registers as normal `LSHFT` and has no delay. Whether in game mode or not, `CAPS` is on the same key in the [ACTION] layer. + +####Disable it permanently +Open the `Makefile` and set `TAP_DANCE_ENABLE = no`. I wrote the layout to compensate for this change, and no further changes to the code should be necessary. Whether or not it's disabled, `CAPS` is on the same key in the [ACTION] layer. + +##Notes: +* `ALT` and `GUI` are reversed compared to the normal US layout. I will also be using my Planck on my mac, and that's the standard in the Apple ecosystem. I may add a special compiler flag in the future to swap the two. +* The DVORAK `Z` key is to the right of the `S` key instead of under it as part of a compromise I made to keep the ARROW keys available on the default layer. I prioritize the ARROW keys, so the DVORAK layout is the one to suffer. +* I also support the little tones that the default Planck layout features, identical to them too, (minus those for layouts I don't support). To enable it, open the `Makefile` and set `AUDIO_ENABLE = yes`. diff --git a/keyboards/planck/keymaps/circuit/config.h b/keyboards/planck/keymaps/circuit/config.h new file mode 100644 index 0000000000..22244f4a7f --- /dev/null +++ b/keyboards/planck/keymaps/circuit/config.h @@ -0,0 +1,91 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* Tap-dance interval definition */ +#define TAPPING_TERM 200 + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Planck Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D0, D5, B5, B6 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#ifdef SUBPROJECT_rev3 + #include "rev3/config.h" +#endif +#ifdef SUBPROJECT_rev4 + #include "rev4/config.h" +#endif + +#endif diff --git a/keyboards/planck/keymaps/circuit/keyboard-layout.png b/keyboards/planck/keymaps/circuit/keyboard-layout.png Binary files differnew file mode 100644 index 0000000000..e9296a6d97 --- /dev/null +++ b/keyboards/planck/keymaps/circuit/keyboard-layout.png diff --git a/keyboards/planck/keymaps/circuit/keymap.c b/keyboards/planck/keymaps/circuit/keymap.c new file mode 100644 index 0000000000..63e01f389a --- /dev/null +++ b/keyboards/planck/keymaps/circuit/keymap.c @@ -0,0 +1,258 @@ +// Layout picture at http://www.keyboard-layout-editor.com/#/gists/125febfad6960add078e6f14256539b6 + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE +#include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _DVORAK 1 +#define _LOCKED 2 +#define _NUMBER 3 +#define _ACTION 4 +#define _FUNCTN 5 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + DVORAK, + NUMBER, + ACTION +}; + +// Key code names +#define SFT_ENT FUNC(0) // Tap for enter, hold for right shift +#define LOCK FUNC(1) +#define KC_PSTE KC_PASTE +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +#ifdef TAP_DANCE_ENABLE +#define SFT_CAP TD(0) // Left shift, double tap for caps +#endif +#ifndef TAP_DANCE_ENABLE +#define SFT_CAP KC_LSFT // Regular left shift +#endif + +// Tap Dance Definitions +#ifdef TAP_DANCE_ENABLE +qk_tap_dance_action_t tap_dance_actions[] = { + [0] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS) +}; +#endif + +// Function definitions +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [1] = ACTION_LAYER_TOGGLE(_LOCKED) +}; + +// Layout definitions +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTY + * ,-----------------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P | BKSP | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | ; | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |*Shift| Z | X | C | V | B | N | M | , | . | Up |SftEnt| + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Ctrl | Alt | Cmd | Vol- | ACTN | Space | NUMS | Vol+ | Left | Down | Left | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {SFT_CAP, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, SFT_ENT}, + {KC_LCTL, KC_LALT, KC_LGUI, KC_VOLD, ACTION, KC_SPC, KC_SPC, NUMBER, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT} +}, + +/* DVORAK + * ,-----------------------------------------------------------------------------------. + * | | ' | , | . | P | Y | F | G | C | R | L | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | A | O | E | U | I | D | H | T | N | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | ; | Q | J | K | X | B | M | W | V | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {_______, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, _______}, + {_______, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_Z }, + {_______, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* LOCK + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| | | | | | | | | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | NULL | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_LOCKED] = { + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* NUMBERS + * ,-----------------------------------------------------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | ~ | NULL | NULL | NULL | | | _ | + | { | } | ? | / | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | ` | NULL | NULL | NULL | \ | - | = | [ | ] | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | NULL | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_NUMBER] = { + {_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, + {_______, KC_TILD, XXXXXXX, XXXXXXX, XXXXXXX, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_QUES, KC_SLSH}, + {_______, KC_GRV, XXXXXXX, XXXXXXX, XXXXXXX, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, _______}, + {_______, _______, _______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______} +}, + +/* ACTIONS + * ,-----------------------------------------------------------------------------------. + * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | Undo | Cut | Copy | Paste| NULL | NULL | NULL | NULL | NULL | PgUp | Enter| + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | Mute | | NULL | | NULL | Home | PgDn | End | + * `-----------------------------------------------------------------------------------' + */ +[_ACTION] = { + {_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, + {_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {KC_CAPS, KC_UNDO, KC_CUT, KC_COPY, KC_PSTE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, KC_ENT }, + {_______, _______, _______, KC_MUTE, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_HOME, KC_PGDN, KC_END } +}, + +/* FUNCTIONS + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | F22 | F23 | F24 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | NULL | NULL | NULL | NULL | NULL |QWERTY|DVORAK| NULL | NULL | NULL | NULL | NULL | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Reset| NULL | Lock | NULL | | NULL | | NULL | NULL | NULL | NULL | + * `-----------------------------------------------------------------------------------' + */ +[_FUNCTN] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 }, + {KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24 }, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, QWERTY, DVORAK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {RESET, XXXXXXX, LOCK, XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX} +} + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + if (IS_LAYER_ON(_DVORAK)) { +#ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); +#endif + layer_off(_DVORAK); + } + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + if (!IS_LAYER_ON(_DVORAK)) { +#ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); +#endif + layer_on(_DVORAK); + } + } + return false; + break; + case NUMBER: + if (record->event.pressed) { + layer_on(_NUMBER); + update_tri_layer(_NUMBER, _ACTION, _FUNCTN); + } else { + layer_off(_NUMBER); + update_tri_layer(_NUMBER, _ACTION, _FUNCTN); + } + return false; + break; + case ACTION: + if (record->event.pressed) { + layer_on(_ACTION); + update_tri_layer(_NUMBER, _ACTION, _FUNCTN); + } else { + layer_off(_ACTION); + update_tri_layer(_NUMBER, _ACTION, _FUNCTN); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { +#ifdef AUDIO_ENABLE + startup_user(); +#endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/dbroqua/keymap.c b/keyboards/planck/keymaps/dbroqua/keymap.c new file mode 100644 index 0000000000..33929cb3af --- /dev/null +++ b/keyboards/planck/keymaps/dbroqua/keymap.c @@ -0,0 +1,234 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _MULTIMEDIA 3 +#define _ADJUST 4 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Func macro definitions. +#define SFT_TAB FUNC(0) // Tap for Enter, hold for Shift + +// Enable these functions using FUNC(n) macro. +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_MULTIMEDIA, KC_TAB) + }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | GUI | AltGr| Alt | Lower| Space | Raise| Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {SFT_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LCTL, KC_LGUI, KC_RALT, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | ( | ) | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | | | | | | | | | { | } | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | [ | ] | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Home | PgDwn| PgUp | End | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LPRN, KC_RPRN}, + {BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LCBR, KC_RCBR}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | - | = | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | ` | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | \ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GRV}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSLS, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* _MULTIMEDIA + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Psc | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | Mute | Vol+ | Vol- | | | |Insert| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Prev | Play | Next | Del | + * `-----------------------------------------------------------------------------------' + */ +[_MULTIMEDIA] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {_______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, KC_VOLD, _______, _______, _______, KC_INS}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_DEL} +}, + + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty| | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, _______, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/dbroqua/layout.png b/keyboards/planck/keymaps/dbroqua/layout.png Binary files differnew file mode 100644 index 0000000000..37b74cdc5e --- /dev/null +++ b/keyboards/planck/keymaps/dbroqua/layout.png diff --git a/keyboards/planck/keymaps/dbroqua/readme.md b/keyboards/planck/keymaps/dbroqua/readme.md new file mode 100644 index 0000000000..777c76abd4 --- /dev/null +++ b/keyboards/planck/keymaps/dbroqua/readme.md @@ -0,0 +1,14 @@ +# Dbroqua Layout + + + +* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/e77306f9d14cc93fa26123b93b106474 +* Online keyboard layout editor (lower layer): http://www.keyboard-layout-editor.com/#/gists/786e03f6fbd274cb4f4e77a3d67f85fa +* Online keyboard layout editor (raise layer): http://www.keyboard-layout-editor.com/#/gists/2e22c71f6910103c20d595d1caa713d6 +* Online keyboard layout editor (multimedia layer): http://www.keyboard-layout-editor.com/#/gists/132ebf8053508a7a81dfa8e0756edb40 + +# Programming Instructions: +Enter into programming mode and run the following command. +``` +$ sudo KEYMAP=dbroqua make dfu +```
\ No newline at end of file diff --git a/keyboards/planck/keymaps/experimental/Makefile b/keyboards/planck/keymaps/experimental/Makefile index 877c4aed0e..3a8250a9b5 100644 --- a/keyboards/planck/keymaps/experimental/Makefile +++ b/keyboards/planck/keymaps/experimental/Makefile @@ -16,6 +16,7 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +ONEHAND_ENABLE = yes # Enable one-hand typing # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/planck/keymaps/experimental/keymap.c b/keyboards/planck/keymaps/experimental/keymap.c index 2c12700944..569dbcc8aa 100644 --- a/keyboards/planck/keymaps/experimental/keymap.c +++ b/keyboards/planck/keymaps/experimental/keymap.c @@ -70,7 +70,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, - {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_FN0, KC_FN0, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, /* Colemak @@ -88,7 +88,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, - {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_FN0, KC_FN0, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, /* Dvorak @@ -106,7 +106,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, - {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_FN0, KC_FN0, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, /* Lower @@ -186,7 +186,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; const uint16_t PROGMEM fn_actions[] = { - + ACTION_SWAP_HANDS_TAP_KEY(KC_SPC), }; #ifdef AUDIO_ENABLE diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index ec142ecbb5..cb7ccb5884 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -21,9 +21,10 @@ extern keymap_config_t keymap_config; #define _RAISE 4 #define _PLOVER 5 #define _TOUCHCURSOR 6 -#define _MOUSE 7 +#define _MOUSECURSOR 7 #define _ADJUST 16 +// Keycodes enum planck_keycodes { QWERTY = SAFE_RANGE, COLEMAK, @@ -35,24 +36,60 @@ enum planck_keycodes { EXT_PLV }; +enum macro_keycodes { + KC_ALT_TAB, + KC_CMD_TAB, + KC_CTL_TAB, + KC_CMD_SLSH, + KC_AG_FIND, + KC_AG_AGAIN, + KC_AG_UNDO, + KC_AG_CUT, + KC_AG_COPY, + KC_AG_PASTE, + KC_AG_DESK_L, + KC_AG_DESK_R, + KC_AG_TAB_C, + KC_AG_TAB_N, + KC_AG_TAB_R, +}; + // Fillers to make layering more clear #define _______ KC_TRNS #define XXXXXXX KC_NO // Custom macros #define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl -#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor -// ^-- Requires KC_TRNS / _______ for the trigger key in the destination layer #define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift -#define LT_ML LT(_MOUSE, KC_A) // L-ayer T-ap M-ouse C-ursor (on A) +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper +#define GUI_SEM GUI_T(KC_SCLN) // Tap for Semicolon, hold for GUI +#define ALT_QUO ALT_T(KC_QUOT) // Tap for Quote, hold for Alt +// Requires KC_TRNS/_______ for the trigger key in the destination layer +#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor +#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor +#define ALT_TAB M(KC_ALT_TAB) // Macro for Alt-Tab +#define CMD_TAB M(KC_CMD_TAB) // Macro for Cmd-Tab +#define CTL_TAB M(KC_CTL_TAB) // Macro for Ctl-Tab +#define CMD_SLSH M(KC_CMD_SLSH) // Macro for Cmd-Slash (personal shortcut to toggle iTerm2 visibility) +#define AG_FIND M(KC_AG_FIND) // Macros for Cmd-[x] vs Ctrl-[x] based on current AG_NORM or AG_SWAP settings +#define AG_AGAIN M(KC_AG_AGAIN) +#define AG_UNDO M(KC_AG_UNDO) +#define AG_CUT M(KC_AG_CUT) +#define AG_COPY M(KC_AG_COPY) +#define AG_PASTE M(KC_AG_PASTE) +#define AG_D_L M(KC_AG_DESK_L) // For Virtual Desktop Switching: Left, and +#define AG_D_R M(KC_AG_DESK_R) // Right +#define AG_T_C M(KC_AG_TAB_C) // For Chrome, etc. Tab Close, +#define AG_T_N M(KC_AG_TAB_N) // Tab New, and +#define AG_T_R M(KC_AG_TAB_R) // Tab Reopen Closed const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Qwerty * ,-----------------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * | Hyper/Tab| Q | W | E | R | T | Y | U | I | O | P | Bksp | * |----------+------+------+------+------+-------------+------+------+------+------+--------| - * | Ctrl/Esc | ML/A | S | D | F | G | H | J | K | L | ; | " | + * | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L |GUI/; | Alt/" | * |----------+------+------+------+------+------|------+------+------+------+------+--------| * | Shift | Z | X | C | V | B | N | M | , | . | / |Sft/Ent | * |----------+------+------+------+------+------+------+------+------+------+------+--------| @@ -60,17 +97,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------------' */ [_QWERTY] = { - {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {CTL_ESC, LT_ML, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {CTL_ESC, KC_A, KC_S, LT_MC(KC_D),KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, GUI_SEM, ALT_QUO}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, /* Colemak * ,-----------------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * | Hyper/Tab| Q | W | F | P | G | J | L | U | Y | ; | Bksp | * |----------+------+------+------+------+-------------+------+------+------+------+--------| - * | Ctrl/Esc | ML/A | R | S | T | D | H | N | E | I | O | " | + * | Ctrl/Esc | A | R | MC/S | T | D | H | N | E | I | O | " | * |----------+------+------+------+------+------|------+------+------+------+------+--------| * | Shift | Z | X | C | V | B | K | M | , | . | / |Sft/Ent | * |----------+------+------+------+------+------+------+------+------+------+------+--------| @@ -78,17 +115,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------------' */ [_COLEMAK] = { - {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, - {CTL_ESC, LT_ML, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {CTL_ESC, KC_A, KC_R, LT_MC(KC_S),KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, /* Dvorak * ,-----------------------------------------------------------------------------------------. - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * | Hyper/Tab| " | , | . | P | Y | F | G | C | R | L | Bksp | * |----------+------+------+------+------+-------------+------+------+------+------+--------| - * | Ctrl/Esc | ML/A | O | E | U | I | D | H | T | N | S | / | + * | Ctrl/Esc | A | O | MC/E | U | I | D | H | T | N | S | / | * |----------+------+------+------+------+------|------+------+------+------+------+--------| * | Shift | ; | Q | J | K | X | B | M | W | V | Z |Sft/Ent | * |----------+------+------+------+------+------+------+------+------+------+------+--------| @@ -96,8 +133,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------------' */ [_DVORAK] = { - {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, - {CTL_ESC, LT_ML, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {CTL_ESC, KC_A, KC_O, LT_MC(KC_E),KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT}, {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, @@ -124,27 +161,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | $ | 4 | 5 | 6 | . | + | * | 4 | 5 | 6 | - | | | + * | $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | = | 7 | 8 | 9 | 0 | - | / | 1 | 2 | 3 | . | \ | + * | = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ | * |------+------+------+------+------+------+------+------+------+------+------+------| * |Brite | | | | | | | Prev | Stop | Slct | Mute | * `-----------------------------------------------------------------------------------' */ [_RAISE] = { {KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - {KC_DLR, KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_ASTR, KC_4, KC_5, KC_6, KC_MINS, KC_PIPE}, - {KC_EQL, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_SLSH, KC_1, KC_2, KC_3, KC_DOT, KC_BSLS}, + {KC_DLR, KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_DOT, KC_4, KC_5, KC_6, KC_ASTR, KC_PIPE}, + {KC_EQL, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_DOT, KC_1, KC_2, KC_3, KC_SLSH, KC_BSLS}, {BACKLIT, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MSTP, KC_MSEL, KC_MUTE} }, /* TouchCursor layer (http://martin-stone.github.io/touchcursor/) plus personal customizations * ,-----------------------------------------------------------------------------------. - * | | | |Shift | GUI | ~ |Insert| Home | Up | End | Bksp | | + * |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | | + * | | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|Desk_R| * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | Undo | Cut | Copy |Paste | ` | PgDn | Del | | | | | + * | | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' @@ -154,28 +191,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_TOUCHCURSOR] = { - {_______, _______, _______, KC_LSFT, KC_LGUI, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______}, - {_______, KC_LALT, KC_SPC, _______, KC_FIND,KC_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______}, - {_______, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE,KC_GRV, KC_PGDN, KC_DEL, _______, _______, _______, _______}, + {ALT_TAB, CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______}, + {_______, KC_LALT, KC_SPC, AG_T_C, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, AG_D_L, AG_D_R }, + {_______, AG_UNDO, AG_CUT, AG_COPY, AG_PASTE,KC_GRV, KC_PGDN, KC_DEL, AG_T_N, AG_T_R, CMD_SLSH,_______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, /* Mouse Layer * ,-----------------------------------------------------------------------------------. - * | | |ACCL0 |ACCL1 |ACCL2 |ACCL2 | |WHL_L | Up |WHL_R | BTN2 | | + * | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | BTN3 | BTN1 | BTN4 |WHL_Up| Left | Down |Right | | | + * | |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | BTN2 | BTN5 |WHL_Dn| BTN1 | | | | | + * | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_MOUSE] = { - {_______, _______, KC_ACL0, KC_ACL1, KC_ACL2, KC_ACL2, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______}, - {_______, _______, _______, KC_BTN3, KC_BTN1, KC_BTN4, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______}, - {_______, _______, _______, _______, KC_BTN2, KC_BTN5, KC_WH_D, KC_BTN1, _______, _______, _______, _______}, +[_MOUSECURSOR] = { + {_______, _______, KC_ACL0, _______, _______, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______}, + {_______, KC_ACL2, KC_BTN2, _______, KC_BTN1, KC_ACL1, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4, KC_BTN5}, + {_______, _______, _______, _______, KC_BTN3, _______, KC_WH_D, KC_BTN1, _______, _______, KC_BTN3, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, @@ -330,6 +367,64 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + bool use_cmd = true; // Use, for example, Cmd-Tab, Cmd-C, Cmd-V, etc. + // Compare to MAGIC_SWAP_ALT_GUI and MAGIC_UNSWAP_ALT_GUI configs, set in: + // quantum/quantum.c + if(keymap_config.swap_lalt_lgui == 1 && keymap_config.swap_ralt_rgui == 1) { + use_cmd = false; // ... or, Alt-Tab, Ctrl-C, Ctrl-V, etc. + } + + switch (id) { + case KC_ALT_TAB: + if(use_cmd) { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } + else { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } + case KC_CMD_TAB: + if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } + else { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } + + case KC_CTL_TAB: + return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END )); + case KC_CMD_SLSH: + return (record->event.pressed ? MACRO( D(LGUI), D(SLSH),END ) : MACRO( U(SLSH),END )); + + case KC_AG_FIND: + return use_cmd ? MACRODOWN( D(LGUI), T(F), END ) : MACRODOWN( D(LCTRL), T(F), END ); + case KC_AG_AGAIN: + return use_cmd ? MACRODOWN( D(LGUI), T(G), END ) : MACRODOWN( D(LCTRL), T(G), END ); + case KC_AG_UNDO: + return use_cmd ? MACRODOWN( D(LGUI), T(Z), END ) : MACRODOWN( D(LCTRL), T(Z), END ); + case KC_AG_CUT: + return use_cmd ? MACRODOWN( D(LGUI), T(X), END ) : MACRODOWN( D(LCTRL), T(X), END ); + case KC_AG_COPY: + return use_cmd ? MACRODOWN( D(LGUI), T(C), END ) : MACRODOWN( D(LCTRL), T(C), END ); + case KC_AG_PASTE: + return use_cmd ? MACRODOWN( D(LGUI), T(V), END ) : MACRODOWN( D(LCTRL), T(V), END ); + + case KC_AG_DESK_L: + return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(SCLN), END ) : MACRODOWN( D(LALT), D(LCTRL), T(SCLN), END ); + case KC_AG_DESK_R: + return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(QUOT), END ) : MACRODOWN( D(LALT), D(LCTRL), T(QUOT), END ); + + case KC_AG_TAB_C: + return use_cmd ? MACRODOWN( D(LGUI), T(W), END ) : MACRODOWN( D(LCTRL), T(W), END ); + case KC_AG_TAB_N: + return use_cmd ? MACRODOWN( D(LGUI), T(T), END ) : MACRODOWN( D(LCTRL), T(T), END ); + case KC_AG_TAB_R: + return use_cmd ? MACRODOWN( D(LGUI), D(LSHIFT), T(T), END ) : MACRODOWN( D(LCTRL), D(LSHIFT), T(T), END ); + } + + return MACRO_NONE; +} + void matrix_init_user(void) { #ifdef AUDIO_ENABLE startup_user(); diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index eb8104379d..e1dd1dca51 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -7,36 +7,47 @@ the exact changes. The diagrams in this README shows the highlights of the changes from the default mappings. I also decided to change all calls to `persistant_default_layer_set()` to -`update_tri_layer()` since this is my personal perference. +`default_layer_set()` since this is my personal perference. + +## Macros +``` +#define ALT_TAB M(KC_ALT_TAB) +``` ## Base Layers (Qwerty/Colemak/Dvorak) These base layers are mostly the same as the default mappings. The interesting -changes are shown below. The `Ctrl/Esc`, mapped using `CTL_T(KC_ESC)` will emit -an `Escape` when tapped, and act as a `Control` key when held. A `TODO` item is -to see if it can also act as a `CapsLock` when double-tapped. The right shift -key acts as `Enter` when tapped, and as a `Shift` key when held. The arrow -keys, which have been moved to the +changes are shown below. + +- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held, +- `GUI/;` as `;` and `GUI`, +- `Alt/"` as `"` and `Alt`, +- `Sft/Ent` as `Enter` and `Shift`, and +- `Hyper/Tab` as `Tab` and `Hyper` + +A `TODO` item is to see if it can also act as a `CapsLock` when double-tapped. +The arrow keys, which have been moved to the [TouchCursor](http://martin-stone.github.io/touchcursor/) layer, have been -replaced with the Media keys as shown. The `ML/A` key activates the Mouse layer -when held, and emits an `A` when tapped. +replaced with the Media keys as shown. The `MC/kc` key activates the +`MouseCursor` layer when held, and emits the corresponding `kc` for its layer, +when tapped. ``` ,-----------------------------------------------------------------------------------------. - | | | | | | | | | | | | | + | Hyper/Tab| | | | | | | | | | | | |----------+------+------+------+------+-------------+------+------+------+------+--------| - | Ctrl/Esc | ML/A | | | | | | | | | | | + | Ctrl/Esc | | |MC/kc | | | | | | |GUI/; | Alt/" | |----------+------+------+------+------+------|------+------+------+------+------+--------| | | | | | | | | | | | |Sft/Ent | |----------+------+------+------+------+------+------+------+------+------+------+--------| | PrntScrn | RGUI | Alt | GUI |Lower | TC/Space |Raise | Next | Vol- | Vol+ | Play | `-----------------------------------------------------------------------------------------' -``` - +``` + ## Lower Layer (Symbols and Function Keys) The symbols and functions keys are essentially the same as the default mapping. The most notable changes are that the symbol keys from the `RAISE` layer have been moved here. The remaining Media keys replace those that are now on the base layers. The `BACKLIT` key has also been moved here. -``` +``` ,-----------------------------------------------------------------------------------. | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | |------+------+------+------+------+-------------+------+------+------+------+------| @@ -46,62 +57,71 @@ base layers. The `BACKLIT` key has also been moved here. |------+------+------+------+------+------+------+------+------+------+------+------| |Brite | | | | | | | Prev | Stop | Slct | Mute | `-----------------------------------------------------------------------------------' -``` - +``` + ## Raise Layer (Numbers and Arithmetic Operators) All of the numbers and arithmetic operators are available on this layer. Some keys are duplicated for the convenience of their positions. The `0` and `$` keys at the far left are for quick access to beginning and end of line in vim. -``` +``` ,-----------------------------------------------------------------------------------. | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | |------+------+------+------+------+-------------+------+------+------+------+------| - | $ | 4 | 5 | 6 | . | + | * | 4 | 5 | 6 | - | | | + | $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | | | |------+------+------+------+------+------|------+------+------+------+------+------| - | = | 7 | 8 | 9 | 0 | - | / | 1 | 2 | 3 | . | \ | + | = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ | |------+------+------+------+------+------+------+------+------+------+------+------| |Brite | | | | | | | Prev | Stop | Slct | Mute | `-----------------------------------------------------------------------------------' -``` - +``` + ## TouchCursor layer plus personal customizations [TouchCursor](http://martin-stone.github.io/touchcursor/) uses the `Space` key as the modifier, with the `IJKL` home row keys representing the inverted-T of the arrow keys. All of the default TouchCursor keymappings for the right hand are represented below. My personalizations include all of the keys shown for -the left hand. Having the `Alt` and `Shift` keys readily accessible from the -home row allows quick word jumps and highlighting when used in conjunction with -the arrow keys. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and -`KC_AGAIN` keycodes have been mapped but they don't seem to work on Mac. -Presumably they'll work under Windows. -``` +the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key +from the base layers) readily accessible from the home row allows quick word +jumps and highlighting when used in conjunction with the arrow keys. The +`Alt-Tab` macro is not only useful under Windows, but also under Mac when used +with alternative switchers like [HyperSwitch](https://bahoom.com/hyperswitch). +The `Cmd-Tab` and `Ctrl-Tab` sequences are duplicated for easy access while in +this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN` +keycodes do not seem to work. There are macros in place that'll "automatically" +choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`, +etc.) depending on which layout you've currently selected (`AG_NORM` or +`AG_SWAP`) in the `_ADJUST` layer. The `Desk_L` and `Desk_R` macros are what I +use to switch between Virtual Desktops Left/Right. The `Tab_C`, `Tab_N` and +`Tab_R` are for "Close Tab," "New Tab" and "Reopen Closed Tab" for apps such as +Google Chrome. +``` ,-----------------------------------------------------------------------------------. - | | | |Shift | GUI | ~ |Insert| Home | Up | End | Bksp | | + |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | |------+------+------+------+------+-------------+------+------+------+------+------| - | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | | + | | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|Desk_R| |------+------+------+------+------+------|------+------+------+------+------+------| - | | Undo | Cut | Copy |Paste | ` | PgDn | Del | | | | | + | | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| | |------+------+------+------+------+------+------+------+------+------+------+------| | | | | | | | | | | | | `-----------------------------------------------------------------------------------' -``` +``` ## Mouse Layer The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer. -The `A` key is used to activate this layer. All 16 keycodes for the mouse from -the `doc/keycode.txt` file are represented, and logically located, IMHO. The -left and right click buttons are duplicated; on the right hand side, for a -quick click here and there, and again on the left hand side for when the +The `D` key (on QWERTY) is used to activate this layer. All 16 keycodes for the +mouse from the `doc/keycode.txt` file are represented, and logically located, +IMHO. The left and right click buttons are duplicated; on the right hand side, +for a quick click here and there, and again on the left hand side for when the buttons need to be held for dragging things or highlighting text, thus allowing the right hand to be free to use the up/down/left/right actions. -``` +``` ,-----------------------------------------------------------------------------------. - | | |ACCL0 |ACCL1 |ACCL2 |ACCL2 | |WHL_L | Up |WHL_R | BTN2 | | + | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | | |------+------+------+------+------+-------------+------+------+------+------+------| - | | | | BTN3 | BTN1 | BTN4 |WHL_Up| Left | Down |Right | | | + | |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 | |------+------+------+------+------+------|------+------+------+------+------+------| - | | | | | BTN2 | BTN5 |WHL_Dn| BTN1 | | | | | + | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | | |------+------+------+------+------+------+------+------+------+------+------+------| | | | | | | | | | | | | `-----------------------------------------------------------------------------------' -``` +``` diff --git a/keyboards/planck/keymaps/jhenahan/Makefile b/keyboards/planck/keymaps/jhenahan/Makefile new file mode 100644 index 0000000000..de01ad2404 --- /dev/null +++ b/keyboards/planck/keymaps/jhenahan/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/jhenahan/config.h b/keyboards/planck/keymaps/jhenahan/config.h new file mode 100644 index 0000000000..cd3adc41cc --- /dev/null +++ b/keyboards/planck/keymaps/jhenahan/config.h @@ -0,0 +1,9 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define FORCE_NKRO +#define WORKMAN_SOUND COLEMAK_SOUND + +#endif diff --git a/keyboards/planck/keymaps/jhenahan/keymap.c b/keyboards/planck/keymaps/jhenahan/keymap.c new file mode 100644 index 0000000000..2bda4b6956 --- /dev/null +++ b/keyboards/planck/keymaps/jhenahan/keymap.c @@ -0,0 +1,314 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _WORKMAN 0 +#define _DEAD 1 +#define _QWERTY 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +enum planck_keycodes { + WORKMAN = SAFE_RANGE, + DEAD, + QWERTY, + LOWER, + RAISE, + PLOVER, + EXT_PLV, + TOG_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + +/* Workman + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | D | R | W | B | J | F | U | P | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | H | T | G | Y | N | E | O | I | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | M | C | V | K | L | Dead | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | RAlt | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_WORKMAN] = { + {KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC}, + {MT(MOD_LCTL,KC_ESC), KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, DEAD, KC_DOT, KC_SLSH, KC_ENT}, + {KC_LCTL, KC_RALT, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Workman Dead Layer + * ,-----------------------------------------------------------------------------------. + * | | % | & | ? | + | @ | $ | _ | [ | ] | ! | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | / | ( | = | 0 | { | } | 1 | * | ) | - | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | 6 | 7 | 8 | 9 | | | \ | 2 | 3 | 4 | 5 | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | < | ~ | ` | , | # | ^ | > | | | + * `-----------------------------------------------------------------------------------' + */ +[_DEAD] = { + {XXXXXXX, KC_PERC, KC_AMPR, KC_QUES, KC_PLUS, KC_AT, KC_DLR, KC_UNDS, KC_LBRC, KC_RBRC, KC_EXLM, XXXXXXX}, + {XXXXXXX, KC_SLSH, KC_LPRN, KC_EQL, KC_0, KC_LCBR, KC_RCBR, KC_1, KC_ASTR, KC_RPRN, KC_MINS, XXXXXXX}, + {XXXXXXX, KC_6, KC_7, KC_8, KC_9, KC_PIPE, KC_BSLS, KC_2, KC_3, KC_4, KC_5, XXXXXXX}, + {XXXXXXX, XXXXXXX, KC_LT, KC_TILD, KC_GRV, KC_COMM, KC_COMM, KC_HASH, KC_CIRC, KC_GT, XXXXXXX, XXXXXXX} +}, + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | RAlt | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LCTL, KC_RALT, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | Vol+ |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Prev | Next | Vol- | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS), _______, KC_VOLU, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, KC_MPLY} +}, + +/* Raise - KWM Interaction + * ,-----------------------------------------------------------------------------------. + * |Restrt| |TgSplt|Flotng|Parent|FlScrn|InsMrk| InsW | InsS | InsN | InsE | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | Mark |Rotate|Prefix| Term | BSP |SwpMrk|SwapW |SwapS |SwapN |SwapE | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |MarkW |MarkS |MarkN |MarkE |Monocl|Float |FocusW|FocusS|FocusN|FocusE| | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {LCAG(KC_Q), XXXXXXX, LCAG(KC_S), LCAG(KC_W), LCAG(KC_D), LCAG(KC_F), LCTL(S(KC_X)), LCTL(S(KC_H)), LCTL(S(KC_J)), LCTL(S(KC_K)), LCTL(S(KC_L)), XXXXXXX}, + {XXXXXXX, LCAG(KC_M), LGUI(LCTL(KC_R)), LCAG(KC_DOT), LCAG(KC_T), LGUI(LCTL(KC_A)), LCTL(LALT(KC_M)), LCTL(LALT(KC_H)), LCTL(LALT(KC_J)), LCTL(LALT(KC_K)), LCTL(LALT(KC_L)), XXXXXXX}, + {_______, LCAG(KC_H), LCAG(KC_J), LCAG(KC_K), LCAG(KC_L), LGUI(LCTL(KC_S)), LGUI(LCTL(KC_D)), LGUI(LALT(KC_H)), LGUI(LALT(KC_J)), LGUI(LALT(KC_K)), LGUI(LALT(KC_L)), _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC}, + {TOG_PLV, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_M, KC_C, XXXXXXX, XXXXXXX, KC_L, KC_COMM, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Workmn|Plover| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, WORKMAN, PLOVER, _______, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_workman[][2] = SONG(WORKMAN_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case WORKMAN: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_workman, false, 0); + #endif + persistant_default_layer_set(1UL<<_WORKMAN); + } + return false; + break; + case DEAD: + if (record->event.pressed) { + layer_on(_DEAD); + set_oneshot_layer(_DEAD, ONESHOT_START); + clear_oneshot_layer_state(ONESHOT_PRESSED); + } + return false; + break; + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + case TOG_PLV: + if (record->event.pressed) { + register_code(KC_R); + register_code(KC_W); + register_code(KC_T); + register_code(KC_C); + register_code(KC_P); + register_code(KC_O); + clear_keyboard(); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/jhenahan/readme.md b/keyboards/planck/keymaps/jhenahan/readme.md new file mode 100644 index 0000000000..a80506fc9d --- /dev/null +++ b/keyboards/planck/keymaps/jhenahan/readme.md @@ -0,0 +1,41 @@ +# jhenahan's layout + +## Layout + +The base layer is based on the +[Workman Dead](https://github.com/ojbucao/Workman/tree/master/mac) layout. The +primary interaction layer is a slightly modified Workman layout with a 'dead' +key on the third row under the middle finger. The dead key activates a layer of +special characters. + +## [Layers](http://www.keyboard-layout-editor.com/#/gists/2b875f7d5d76fe4408c0a5b3bd76ddae) +### Function Layer + +This is very slightly modified from the default, mainly just to rearrange the media keys. + +### [KWM](https://github.com/koekeishiya/kwm) Interaction Layer + +`kwm` is a tiling window manager for OS X. The keys defined in my keymap +correspond to the settings I use in +[my `kwmrc` file](https://github.com/jhenahan/dotfiles/blob/master/kwm/kwmrc). + +### QWERTY + +Just in case. + +### [Plover](http://www.openstenoproject.org/plover/) + +This layout functions exactly as a Workman layout unless you're running the Plover +application. Includes a key for toggling Plover while it's running. + +Add this in the appropriate section of your `plover.cfg` to allow this altered layout: + +``` ini +[System: English Stenotype] +keymap[keyboard] = [["#", ["1", "2", "3", "4", "5", "6", "7", "8", "9", "0", "-", "="]], ["S-", ["q", "a"]], ["T-", ["d"]], ["K-", ["s"]], ["P-", ["r"]], ["W-", ["h"]], ["H-", ["w"]], ["R-", ["t"]], ["A-", ["m"]], ["O-", ["c"]], ["*", ["y", "g", "j", "b"]], ["-E", ["l"]], ["-U", [","]], ["-F", ["f"]], ["-R", ["n"]], ["-P", ["u"]], ["-B", ["e"]], ["-L", ["p"]], ["-G", ["o"]], ["-T", [";"]], ["-S", ["i"]], ["-D", ["BackSpace"]], ["-Z", ["'"]], ["no-op", ["\\", "]", "x", ".", "/"]], ["arpeggiate", ["space"]]] +``` + +### Adjust Layer + +This layer is only slightly modified from the default to remove Dvorak and +Colemak and replace them with Workman. diff --git a/keyboards/planck/keymaps/premek/Makefile b/keyboards/planck/keymaps/premek/Makefile new file mode 100644 index 0000000000..0f4953888d --- /dev/null +++ b/keyboards/planck/keymaps/premek/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/premek/keymap.c b/keyboards/planck/keymaps/premek/keymap.c new file mode 100644 index 0000000000..9b212ab259 --- /dev/null +++ b/keyboards/planck/keymaps/premek/keymap.c @@ -0,0 +1,231 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = { + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_DEL, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_TAB, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, + {KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH}, + {KC_LGUI, _______, _______, KC_LALT, LOWER, KC_SPC, KC_ENT, KC_SPC, RAISE, KC_RALT, _______, KC_RGUI} +}, +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_LOWER] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0}, + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_HOME, KC_PGDN, KC_PGUP, KC_END }, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, KC_F12, KC_PLUS, KC_PIPE, KC_LCBR, KC_RCBR}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, +[_RAISE] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, + {_______, _______, _______, KC_QUOT, KC_MINS, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}, + {_______, KC_TILD, KC_GRV, KC_PLUS, KC_EQL, KC_PIPE, _______, KC_BSLS, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/premek/readme.md b/keyboards/planck/keymaps/premek/readme.md new file mode 100644 index 0000000000..16debdd632 --- /dev/null +++ b/keyboards/planck/keymaps/premek/readme.md @@ -0,0 +1,4 @@ +# Split Layout +Inspired by TECK + +[Layout](http://www.keyboard-layout-editor.com/##@_switchMount=cherry&switchBrand=gateron&switchType=KS-3-Tea&pcb:true%3B&@_c=%23e6e6e6&t=%23757575&a:7&fa@:5%3B%3B&=Esc&_a:4&fa@:5&:0&:0&:0&:0&:0&:0&:0&:0&:5%3B%3B&=%0A%0A!%0A1%0A%0A%0A%0A%0A%0AQ&=%0A%0A%2F@%0A2%0A%0A%0A%0A%0A%0AW&=%0A%0A%23%0A3%0A%0A%0A%0A%0A%0AE&=%0A%0A$%0A4%0A%0A%0A%0A%0A%0AR&=%0A%0A%25%0A5%0A%0A%0A%0A%0A%0AT&_c=%23e3b02d&a:7%3B&=Del&_c=%23e6e6e6&a:4%3B&=%0A%0A%5E%0A6%0A%0A%0A%0A%0A%0AY&=%0A%0A%2F&%0A7%0A%0A%0A%0A%0A%0AU&=%0A%0A*%0A8%0A%0A%0A%0A%0A%0AI&=%0A%0A(%0A9%0A%0A%0A%0A%0A%0AO&=%0A%0A)%0A0%0A%0A%0A%0A%0A%0AP%3B&@_a:7%3B&=Shift&_a:4%3B&=%0A%0A%0AF1%0A%0A%0A%0A%0A%0AA&=%0A%0A%0AF2%0A%0A%0A%0A%0A%0AS&=%0A%0A'%0AF3%0A%0A%0A%0A%0A%0AD&_c=%23e3b02d&n:true%3B&=%0A%0A-%0AF4%0A%0A%0A%0A%0A%0AF&_c=%23e6e6e6%3B&=%0A%0A%0AF5%0A%0A%0A%0A%0A%0AG&_c=%23e3b02d&a:7%3B&=Tab&_c=%23e6e6e6&a:4%3B&=%0A%0A%0AF6%0A%0A%0A%0A%0A%0AH&_c=%23e3b02d&n:true%3B&=%0A%0A%2F&larr%2F%3B%0AHom%0A%0A%0A%0A%0A%0AJ&_c=%23e6e6e6%3B&=%0A%0A%2F&darr%2F%3B%0APgD%0A%0A%0A%0A%0A%0AK&=%0A%0A%2F&uarr%2F%3B%0APgU%0A%0A%0A%0A%0A%0AL&=%0A%0A%2F&rarr%2F%3B%0AEnd%0A%0A%0A%0A%0A%0A%2F%3B%3B&@_a:7%3B&=Ctrl&_a:4%3B&=%0A%0A~%0AF7%0A%0A%0A%0A%0A%0AZ&=%0A%0A%60%0AF8%0A%0A%0A%0A%0A%0AX&=%0A%0A+%0AF9%0A%0A%0A%0A%0A%0AC&=%0A%0A%2F=%0AF10%0A%0A%0A%0A%0A%0AV&=%0A%0A%7C%0AF11%0A%0A%0A%0A%0A%0AB&_c=%23e3b02d&a:7%3B&=BSp&_c=%23e6e6e6&a:4%3B&=%0A%0A%5C%0AF12%0A%0A%0A%0A%0A%0AN&=%0A%0A%5B%0A%0A%0A%0A%0A%0A%0AM&=%0A%0A%5D%0A%0A%0A%0A%0A%0A%0A,&=%0A%0A%7B%0A%0A%0A%0A%0A%0A%0A.&=%0A%0A%7D%0A%0A%0A%0A%0A%0A%0A%2F%2F%3B&@_a:7%3B&=&=&=&=Alt&_c=%23e3b02d%3B&=%2F&dArr%2F%3B&_c=%23e6e6e6%3B&=spc&_c=%23e3b02d%3B&=%2F&crarr%2F%3B&_c=%23e6e6e6%3B&=spc&_c=%23e3b02d%3B&=%2F&uArr%2F%3B&_c=%23e6e6e6%3B&=Alt&=&=) diff --git a/keyboards/planck/keymaps/pvc/Makefile b/keyboards/planck/keymaps/pvc/Makefile index 0b2f060de4..b2ff961fa5 100644 --- a/keyboards/planck/keymaps/pvc/Makefile +++ b/keyboards/planck/keymaps/pvc/Makefile @@ -1,12 +1,12 @@ # Build Options -# change to "no" to disable the options, or define them in the Makefile in +# change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality diff --git a/keyboards/planck/keymaps/pvc/config.h b/keyboards/planck/keymaps/pvc/config.h index c857a3e89d..1004c8b99f 100644 --- a/keyboards/planck/keymaps/pvc/config.h +++ b/keyboards/planck/keymaps/pvc/config.h @@ -59,13 +59,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* ws2812 RGB LED */ -#define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 28 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_BREATHING /* * Feature disable options @@ -73,10 +68,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ /* disable debug print */ -//#define NO_DEBUG +#ifndef NO_DEBUG +# define NO_DEBUG +#endif /* disable print */ -//#define NO_PRINT +// #ifndef NO_PRINT +// # define NO_PRINT +// #endif + +/* Only print user print statements */ +#define USER_PRINT + /* disable action features */ //#define NO_ACTION_LAYER diff --git a/keyboards/planck/keymaps/pvc/keymap.c b/keyboards/planck/keymaps/pvc/keymap.c index 2fc5f0da16..6ad95832d2 100644 --- a/keyboards/planck/keymaps/pvc/keymap.c +++ b/keyboards/planck/keymaps/pvc/keymap.c @@ -2,48 +2,59 @@ #include "action_layer.h" #include "eeconfig.h" #include "led.h" +#include "mousekey.h" #ifdef AUDIO_ENABLE #include "audio.h" #include "song_list.h" #endif -#define LAYER_QWERTY 0 -#define LAYER_COLEMAK 1 -#define LAYER_DVORAK 2 -#define LAYER_UPPER 3 -#define LAYER_LOWER 4 -#define LAYER_FUNCTION 5 -#define LAYER_MOUSE 6 -#define LAYER_ADJUST 7 - -#define MACRO_QWERTY 0 -#define MACRO_COLEMAK 1 -#define MACRO_DVORAK 2 -#define MACRO_UPPER 3 -#define MACRO_LOWER 4 -#define MACRO_FUNCTION 5 -#define MACRO_MOUSE 6 -#define MACRO_TIMBRE_1 7 -#define MACRO_TIMBRE_2 8 -#define MACRO_TIMBRE_3 9 -#define MACRO_TIMBRE_4 10 -#define MACRO_TEMPO_U 11 -#define MACRO_TEMPO_D 12 -#define MACRO_TONE_DEFAULT 13 -#define MACRO_MUSIC_TOGGLE 14 -#define MACRO_AUDIO_TOGGLE 16 -#define MACRO_INC_VOICE 18 -#define MACRO_DEC_VOICE 19 -#define MACRO_BACKLIGHT 20 -#define MACRO_BREATH_TOGGLE 21 -#define MACRO_BREATH_SPEED_INC 23 -#define MACRO_BREATH_SPEED_DEC 24 -#define MACRO_BREATH_DEFAULT 25 +enum keyboard_layers { + LAYER_QWERTY = 0, + LAYER_UPPER, + LAYER_LOWER, + LAYER_FUNCTION, + LAYER_MOUSE, + LAYER_ADJUST, +}; +enum keyboard_macros { + MACRO_QWERTY = 0, + MACRO_UPPER, + MACRO_LOWER, + MACRO_FUNCTION, + MACRO_MOUSE, + MACRO_TIMBRE_1, + MACRO_TIMBRE_2, + MACRO_TIMBRE_3, + MACRO_TIMBRE_4, + MACRO_TEMPO_U, + MACRO_TEMPO_D, + MACRO_TONE_DEFAULT, + MACRO_MUSIC_TOGGLE, + MACRO_AUDIO_TOGGLE, + MACRO_INC_VOICE, + MACRO_DEC_VOICE, + MACRO_BACKLIGHT, + MACRO_BREATH_TOGGLE, + MACRO_BREATH_SPEED_INC, + MACRO_BREATH_SPEED_DEC, + MACRO_BREATH_DEFAULT, + MACRO_MOUSE_MOVE_UL, + MACRO_MOUSE_MOVE_UR, + MACRO_MOUSE_MOVE_DL, + MACRO_MOUSE_MOVE_DR, + MACRO_HELP_1, + MACRO_HELP_2, + MACRO_HELP_3, + MACRO_HELP_4, + MACRO_HELP_5, + MACRO_HELP_6, + MACRO_HELP_7, + MACRO_HELP_8, + MACRO_HELP_9, +}; #define M_QWRTY M(MACRO_QWERTY) -#define M_COLMK M(MACRO_COLEMAK) -#define M_DVORK M(MACRO_DVORAK) #define M_UPPER M(MACRO_UPPER) #define M_LOWER M(MACRO_LOWER) #define M_FUNCT M(MACRO_FUNCTION) @@ -60,6 +71,19 @@ #define M_BSPDU M(MACRO_BREATH_SPEED_INC) #define M_BSPDD M(MACRO_BREATH_SPEED_DEC) #define M_BDFLT M(MACRO_BREATH_DEFAULT) +#define M_MS_UL M(MACRO_MOUSE_MOVE_UL) +#define M_MS_UR M(MACRO_MOUSE_MOVE_UR) +#define M_MS_DL M(MACRO_MOUSE_MOVE_DL) +#define M_MS_DR M(MACRO_MOUSE_MOVE_DR) +#define M_HELP1 M(MACRO_HELP_1) +#define M_HELP2 M(MACRO_HELP_2) +#define M_HELP3 M(MACRO_HELP_3) +#define M_HELP4 M(MACRO_HELP_4) +#define M_HELP5 M(MACRO_HELP_5) +#define M_HELP6 M(MACRO_HELP_6) +#define M_HELP7 M(MACRO_HELP_7) +#define M_HELP8 M(MACRO_HELP_8) +#define M_HELP9 M(MACRO_HELP_9) #define VC_UP M(MACRO_INC_VOICE) @@ -77,6 +101,7 @@ #define SC_ACLS LALT(KC_F4) #define SC_CCLS LCTL(KC_F4) +#define TG_NKRO MAGIC_TOGGLE_NKRO #define OS_SHFT KC_FN0 #define _______ KC_TRNS @@ -86,146 +111,108 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* QWERTY - * .-----------------------------------------------------------------------------------------------------------. - * | TAB | Q | W | E | R | T | Y | U | I | O | P | BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | ESC | A | S | D | F | G | H | J | K | L | ; | ' | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | LSHIFT | Z | X | C | V | B | N | M | , | . | UP | ENTER | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | LCTRL | LWIN | FN | LALT | UPPER | SPACE | SPACE | LOWER | SHIFT | LEFT | DOWN | RIGHT | - * '-----------------------------------------------------------------------------------------------------------' - */ - - [LAYER_QWERTY] = { // QWERTY - { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, - { KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, - { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT }, - { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_LEFT, KC_DOWN, KC_RGHT }, - }, - -/* COLEMAK - * .-----------------------------------------------------------------------------------------------------------. - * | TAB | Q | W | F | P | G | J | L | U | Y | ; | ESC | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | BACKSP | A | R | S | T | D | H | N | E | I | O | ' | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | LSHIFT | Z | X | C | V | B | K | M | , | . | UP | ENTER | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | LCTRL | LWIN | FN | LALT | UPPER | SPACE | SPACE | LOWER | SHIFT | LEFT | DOWN | RIGHT | - * '-----------------------------------------------------------------------------------------------------------' - */ - - [LAYER_COLEMAK] = { // COLEMAK - { KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_ESC }, - { KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT }, - { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT }, - { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_LEFT, KC_DOWN, KC_RGHT }, - }, - -/* DVORAK - * .-----------------------------------------------------------------------------------------------------------. - * | TAB | ' | , | . | P | Y | F | G | C | R | L | BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | ESC | A | O | E | U | I | D | H | T | N | S | / | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | LSHIFT | ; | Q | J | K | X | B | M | W | V | Z | ENTER | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | LCTRL | LWIN | FN | LALT | UPPER | SPACE | SPACE | LOWER | UP | DOWN | LEFT | RIGHT | - * '-----------------------------------------------------------------------------------------------------------' - */ - - [LAYER_DVORAK] = { // DVORAK - { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC }, - { KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH }, - { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, - { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, KC_UP, KC_DOWN, KC_LEFT, KC_RGHT }, - }, - -/* UPPER - * .-----------------------------------------------------------------------------------------------------------. - * | PRINT | F1 | F2 | F3 | F4 | NUM LK | / | 7 | 8 | 9 | - | DEL | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | CAP LK | F5 | F6 | F7 | F8 | SCR LK | * | 4 | 5 | 6 | + | INS | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | F9 | F10 | F11 | F12 | PAUSE | | 1 | 2 | 3 | ENTER | HOME | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | | | | | | 0 | 0 | | RALT | . | ENTER | END | - * '-----------------------------------------------------------------------------------------------------------' - */ - - [LAYER_UPPER] = { // UPPER - { KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_NLCK, KC_PSLS, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, KC_DEL }, - { KC_CAPS, KC_F5, KC_F6, KC_F7, KC_F8, KC_SLCK, KC_PAST, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, KC_INS }, - { _______, KC_F9, KC_F10, KC_F11, KC_F12, KC_PAUS, XXXXXXX, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, KC_HOME }, - { _______, _______, _______, _______, _______, KC_KP_0, KC_KP_0, _______, KC_RALT, KC_PDOT, KC_PENT, KC_END }, - }, - -/* LOWER - * .-----------------------------------------------------------------------------------------------------------. - * | | $ | { | [ | ( | % | # | ) | ] | } | @ | PG UP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | ^ | * | + | - | ; | : | _ | ' | " | ` | PG DN | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | | | & | ! | ~ | / | \ | = | < | > | ? | HOME | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | | | | | | | | | | | | END | - * '-----------------------------------------------------------------------------------------------------------' - */ - - [LAYER_LOWER] = { // LOWER - { _______, KC_DLR, KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT, KC_PGUP }, - { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SCLN, KC_COLN, KC_UNDS, KC_QUOT, KC_DQT, KC_GRV, KC_PGDN }, - { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SLSH, KC_BSLS, KC_EQL, KC_LT, KC_GT, KC_QUES, KC_HOME }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END }, - }, - - -/* FUNCTION - * .-----------------------------------------------------------------------------------------------------------. - * | NUM LK | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | PAUSE | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | CAP LK | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | PRINT | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | SCR LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MUTE | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | LCTRL | LWIN | FN | LALT | UPPER | PLAY | PLAY | LOWER | VOL UP | VOL DN | NEXT | PREV | - * '-----------------------------------------------------------------------------------------------------------' - */ - [LAYER_FUNCTION] = { // FUNCTION - { KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PAUS }, - { KC_CAPS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_PSCR }, - { KC_SLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE }, - { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, KC_VOLU, KC_VOLD, KC_MPRV, KC_MNXT }, - }, - -#ifdef MOUSEKEY_ENABLE - - [LAYER_MOUSE] = { // MOUSE - { KC_ESC, KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC }, - { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, - { _______, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_U, KC_WH_D }, - { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, KC_MS_U, KC_MS_D, KC_MS_L, KC_MS_R }, - }, - -#endif - - [LAYER_ADJUST] = { // ADJUST - { _______, TIMBR_1, TIMBR_2, TIMBR_3, TIMBR_4, TMPO_UP, TMPO_DN, TMPO_DF, _______, _______, MU_TOG, AU_TOG }, - { _______, M_QWRTY, M_COLMK, M_DVORK, _______, _______, _______, _______, _______, _______, _______, _______ }, - { _______, _______, _______, _______, M_BACKL, RESET, _______, M_MOUSE, _______, _______, MUV_IN, _______ }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MUV_DE, _______ }, - }, - -/* - [LAYER_EMPTY] = { - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, }, - { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, }, - }, +/* LAYER = LAYER_QWERTY + .-----------------------------------------------------------------------------------------------------------. + | TAB | Q | W | E | R | T | Y | U | I | O | P | BACKSP | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ESC | A | S | D | F | G | H | J | K | L | ; | ' | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | LSHIFT | Z | X | C | V | B | N | M | , | . | UP | ENTER | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | LCTRL | LWIN | FN | LALT | UPPER | SPACE | SPACE | LOWER | OSHIFT | LEFT | DOWN | RIGHT | + '-----------------------------------------------------------------------------------------------------------' */ +[LAYER_QWERTY] = { + { KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_BSPC }, + { KC_ESC , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT }, + { KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_UP , KC_ENT }, + { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC , KC_SPC , M_LOWER, OS_SHFT, KC_LEFT, KC_DOWN, KC_RGHT } +}, +/* LAYER = LAYER_UPPER + .-----------------------------------------------------------------------------------------------------------. + | PRINT | F1 | F2 | F3 | F4 | NUM LK | KP / | KP 7 | KP 8 | KP 9 | KP - | DEL | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | PAUSE | F5 | F6 | F7 | F8 | SCR LK | KP * | KP 4 | KP 5 | KP 6 | KP + | INS | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | F9 | F10 | F11 | F12 | PAUSE | KP 0 | KP 1 | KP 2 | KP 3 | KP ENT | HOME | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | ______ | ______ | ______ | UPPER | KP 0 | KP 0 | ______ | RALT | KP . | KP ENT | END | + '-----------------------------------------------------------------------------------------------------------' +*/ +[LAYER_UPPER] = { + { KC_PSCR, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_NLCK, KC_PSLS, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, KC_DEL }, + { KC_PAUS, KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_SLCK, KC_PAST, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, KC_INS }, + { _______, KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_PAUS, KC_KP_0, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, KC_HOME }, + { _______, _______, _______, _______, M_UPPER, KC_KP_0, KC_KP_0, _______, KC_RALT, KC_PDOT, KC_PENT, KC_END } +}, +/* LAYER = LAYER_LOWER + .-----------------------------------------------------------------------------------------------------------. + | ______ | $ | { | [ | ( | % | # | ) | ] | } | @ | PG UP | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | ^ | * | + | - | / | \ | _ | ' | " | ` | PG DN | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | | | & | ! | ~ | ; | : | = | < | > | ? | HOME | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | ______ | ______ | ______ | ______ | ______ | ______ | LOWER | ______ | ______ | ______ | END | + '-----------------------------------------------------------------------------------------------------------' +*/ +[LAYER_LOWER] = { + { _______, KC_DLR , KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT , KC_PGUP }, + { _______, KC_CIRC, KC_ASTR, KC_PLUS, KC_MINS, KC_SLSH, KC_BSLS, KC_UNDS, KC_QUOT, KC_DQT , KC_GRV , KC_PGDN }, + { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SCLN, KC_COLN, KC_EQL , KC_LT , KC_GT , KC_QUES, KC_HOME }, + { _______, _______, _______, _______, _______, _______, _______, M_LOWER, _______, _______, _______, KC_END } +}, +/* LAYER = LAYER_FUNCTION + .-----------------------------------------------------------------------------------------------------------. + | XXXXXX | F13 | F14 | F15 | F16 | NUM LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | F17 | F18 | F19 | F20 | SCR LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | F21 | F22 | F23 | F24 | CAP LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | VOL UP | MUTE | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | ______ | FN | ______ | ______ | PLAY | PLAY | ______ | ______ | PREV | VOL DN | NEXT | + '-----------------------------------------------------------------------------------------------------------' +*/ +[LAYER_FUNCTION] = { + { XXXXXXX, KC_F13 , KC_F14 , KC_F15 , KC_F16 , KC_NLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { XXXXXXX, KC_F17 , KC_F18 , KC_F19 , KC_F20 , KC_SLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { _______, KC_F21 , KC_F22 , KC_F23 , KC_F24 , KC_CAPS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU, KC_MUTE }, + { _______, _______, M_FUNCT, _______, _______, KC_MPLY, KC_MPLY, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT } +}, +/* LAYER = LAYER_MOUSE + .-----------------------------------------------------------------------------------------------------------. + | ESC | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MS UL | MS U | MS UR | MS WHL | MS WHR | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | MS BT5 | MS BT4 | MS BT3 | MS BT2 | XXXXXX | XXXXXX | MS L | XXXXXX | MS R | XXXXXX | MS WHU | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MS DL | MS D | MS DR | MS U | MS WHD | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | ______ | ______ | ______ | ______ | ______ | MS BT1 | MS BT1 | ______ | ______ | MS L | MS D | MS R | + '-----------------------------------------------------------------------------------------------------------' +*/ +[LAYER_MOUSE] = { + { KC_ESC , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_MS_UL, KC_MS_U, M_MS_UR, KC_WH_L, KC_WH_R }, + { XXXXXXX, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, KC_MS_L, XXXXXXX, KC_MS_R, XXXXXXX, KC_WH_U }, + { _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_MS_DL, KC_MS_D, M_MS_DR, KC_MS_U, KC_WH_D }, + { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R } +}, +/* LAYER = LAYER_ADJUST + .-----------------------------------------------------------------------------------------------------------. + | XXXXXX | HELP 1 | HELP 2 | HELP 3 | HELP 4 | HELP 5 | HELP 6 | HELP 7 | HELP 8 | HELP 9 | MUSIC | AUDIO | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | BRTOG | BRSPD+ | BRSPD- | BRDFLT | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | QWERTY | XXXXXX | XXXXXX | BACKLT | RESET | XXXXXX | MOUSE | XXXXXX | XXXXXX | VOICE+ | XXXXXX | + |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + | XXXXXX | XXXXXX | XXXXXX | XXXXXX | UPPER | XXXXXX | XXXXXX | LOWER | XXXXXX | TEMPO- | VOICE- | TEMPO+ | + '-----------------------------------------------------------------------------------------------------------' +*/ +[LAYER_ADJUST] = { + { XXXXXXX, M_HELP1, M_HELP2, M_HELP3, M_HELP4, M_HELP5, M_HELP6, M_HELP7, M_HELP8, M_HELP9, MU_TOG , AU_TOG }, + { XXXXXXX, M_BRTOG, M_BSPDU, M_BSPDD, M_BDFLT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { XXXXXXX, M_QWRTY, XXXXXXX, XXXXXXX, M_BACKL, RESET , XXXXXXX, M_MOUSE, XXXXXXX, XXXXXXX, MUV_IN , XXXXXXX }, + { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_UPPER, XXXXXXX, XXXXXXX, M_LOWER, XXXXXXX, TMPO_DN, MUV_DE , TMPO_UP } +}, }; @@ -234,10 +221,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { float tone_my_startup[][2] = SONG(ODE_TO_JOY); float tone_my_goodbye[][2] = SONG(ROCK_A_BYE_BABY); -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); - float tone_audio_on[][2] = SONG(CLOSE_ENCOUNTERS_5_NOTE); float tone_music_on[][2] = SONG(DOE_A_DEER); float tone_caps_on[][2] = SONG(CAPS_LOCK_ON_SOUND); @@ -257,7 +240,7 @@ void persistant_default_layer_set(uint16_t default_layer) } const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_MODS_ONESHOT(MOD_LSFT), + [0] = ACTION_MODS_ONESHOT(MOD_RSFT), }; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) @@ -267,46 +250,101 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) switch(id) { - case MACRO_QWERTY: + case MACRO_HELP_1: if (record->event.pressed) { - persistant_default_layer_set(1UL<<LAYER_QWERTY); - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, STACCATO); - #endif /* AUDIO_ENABLE */ + uprintf("1"); } break; - case MACRO_COLEMAK: + case MACRO_HELP_2: if (record->event.pressed) { - persistant_default_layer_set(1UL<<LAYER_COLEMAK); - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, STACCATO); - #endif /* AUDIO_ENABLE */ + uprintf("2"); } break; - case MACRO_DVORAK: + case MACRO_HELP_3: if (record->event.pressed) { - persistant_default_layer_set(1UL<<LAYER_DVORAK); - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, STACCATO); - #endif /* AUDIO_ENABLE */ + uprintf("3"); } break; - case MACRO_LOWER: + case MACRO_HELP_4: if (record->event.pressed) { - layer_on(LAYER_LOWER); - update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + uprintf("4"); } - else + break; + + case MACRO_HELP_5: + if (record->event.pressed) { - layer_off(LAYER_LOWER); - update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + uprintf("5"); + } + break; + + case MACRO_HELP_6: + if (record->event.pressed) + { + uprintf("6"); + } + break; + + case MACRO_HELP_7: + if (record->event.pressed) + { + uprintf("7"); + } + break; + + case MACRO_HELP_8: + if (record->event.pressed) + { + uprintf("8"); + } + break; + + case MACRO_HELP_9: + if (record->event.pressed) + { + uprintf("9"); + } + break; + + case MACRO_BREATH_TOGGLE: + if (record->event.pressed) + { + breathing_toggle(); + } + break; + + case MACRO_BREATH_SPEED_INC: + if (record->event.pressed) + { + breathing_speed_inc(1); + } + break; + + case MACRO_BREATH_SPEED_DEC: + if (record->event.pressed) + { + breathing_speed_dec(1); + } + break; + + case MACRO_BREATH_DEFAULT: + if (record->event.pressed) + { + breathing_defaults(); + } + break; + + case MACRO_QWERTY: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_QWERTY); } break; @@ -314,6 +352,8 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) if (record->event.pressed) { layer_on(LAYER_UPPER); + breathing_speed_set(2); + breathing_pulse(); update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); } else @@ -323,13 +363,32 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) } break; + case MACRO_LOWER: + if (record->event.pressed) + { + layer_on(LAYER_LOWER); + breathing_speed_set(2); + breathing_pulse(); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + else + { + layer_off(LAYER_LOWER); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + break; + case MACRO_FUNCTION: if (record->event.pressed) { + breathing_speed_set(3); + breathing_enable(); layer_on(LAYER_FUNCTION); } else { + breathing_speed_set(1); + breathing_self_disable(); layer_off(LAYER_FUNCTION); } break; @@ -352,6 +411,58 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) } break; + case MACRO_MOUSE_MOVE_UL: + if (record->event.pressed) + { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_LEFT); + } + else + { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_LEFT); + } + break; + + case MACRO_MOUSE_MOVE_UR: + if (record->event.pressed) + { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_RIGHT); + } + else + { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_RIGHT); + } + break; + + case MACRO_MOUSE_MOVE_DL: + if (record->event.pressed) + { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_LEFT); + } + else + { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_LEFT); + } + break; + + case MACRO_MOUSE_MOVE_DR: + if (record->event.pressed) + { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_RIGHT); + } + else + { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_RIGHT); + } + break; + #endif /* MOUSEKEY_ENABLE */ #ifdef AUDIO_ENABLE diff --git a/keyboards/planck/keymaps/sgoodwin/Makefile b/keyboards/planck/keymaps/sgoodwin/Makefile new file mode 100644 index 0000000000..581e08cd02 --- /dev/null +++ b/keyboards/planck/keymaps/sgoodwin/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/sgoodwin/keymap.c b/keyboards/planck/keymaps/sgoodwin/keymap.c new file mode 100644 index 0000000000..4d5d3d7ef6 --- /dev/null +++ b/keyboards/planck/keymaps/sgoodwin/keymap.c @@ -0,0 +1,233 @@ +// This is sgoodwin's layout file for the Quantum project. +// It doesn't have Plover or Dvorak layers because he doesn't use that. +// It Also doesn't allow for swapping alt with CMD because that only happens in error. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 1 +#define _COLEMAK 0 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum planck_keycodes { + COLEMAK = SAFE_RANGE, + QWERTY, + LOWER, + RAISE, + BACKLIT, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |SHEnt | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Hyper| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT(MOD_RSFT, KC_ENT) }, + {ALL_T(KC_NO), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |SHEnt | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Hyper| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT(MOD_RSFT, KC_ENT) }, + {ALL_T(KC_NO), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {BACKLIT, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {BACKLIT, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff| | |Qwerty|Colemk| | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, _______, _______, QWERTY, COLEMAK, _______, _______, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/sgoodwin/readme.md b/keyboards/planck/keymaps/sgoodwin/readme.md new file mode 100644 index 0000000000..dfa88f380d --- /dev/null +++ b/keyboards/planck/keymaps/sgoodwin/readme.md @@ -0,0 +1,10 @@ +# sgoodwin's Planck Layout + +Includes: + +1. No Dvorak or Plover +2. No alt-swapping +3. Right enter is shift when held down, enter when tapped. +4. Bottom left corner in normal layers is Hyper and not brightness control. +5. Brightness is instead in the bottom corner on raise/lower. + diff --git a/keyboards/planck/keymaps/tong92/Makefile b/keyboards/planck/keymaps/tong92/Makefile new file mode 100644 index 0000000000..e6608e74c5 --- /dev/null +++ b/keyboards/planck/keymaps/tong92/Makefile @@ -0,0 +1,62 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/tong92/keymap.c b/keyboards/planck/keymaps/tong92/keymap.c new file mode 100644 index 0000000000..2be28fb4f6 --- /dev/null +++ b/keyboards/planck/keymaps/tong92/keymap.c @@ -0,0 +1,146 @@ +//Author: tong92 <tong92power@gmail.com> + +#include "planck.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define LOWER M(1) +#define RAISE M(2) +#define GO_DEFT M(99) +# + +//MIT Layout +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* 0: Qwerty layer (Default) +* ,-----------------------------------------------------------------------. +* |Tab | q | w | e | r | t | y | u | i | o | p | BS | +* |-----------------------------------------------------------------------| +* |Ctrl | a | s | d | f | g | h | j | k | l | ; |enter| +* |-----------------------------------------------------------------------| +* |Shift| z | x | c | v | b | n | m | , | . | / |Shift| +* |-----------------------------------------------------------------------| +* | Fn |Ctrl | Win | Alt |Lower| Space |Upper| ' | [ | ] | Alt | +* `-----------------------------------------------------------------------' +*/ +[0] ={ +{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, +{KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_ENT }, +{KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT}, +{MO(4), KC_RCTL,KC_LGUI,KC_LALT,LOWER,KC_SPC,KC_SPC,RAISE,KC_QUOT,KC_LBRC,KC_RBRC,KC_RALT} +}, +/* 1: Lower layer +* ,-----------------------------------------------------------------------. +* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | BS | +* |-----------------------------------------------------------------------| +* | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | \ | +* |-----------------------------------------------------------------------| +* | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| +* |-----------------------------------------------------------------------| +* | | | | | | SPACE |mouse| END | LEFT| DOWN|RIGHT| +* `-----------------------------------------------------------------------' +*/ +[1] ={ +{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC }, +{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS }, +{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,KC_F12,_______,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN }, +{XXXXXXX,_______,_______,_______,_______,KC_SPC,KC_SPC,_______,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT} +}, +/* 2: Upper layer +* ,-----------------------------------------------------------------------. +* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | BS | +* |-----------------------------------------------------------------------| +* | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | | +* |-----------------------------------------------------------------------| +* | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| +* |-----------------------------------------------------------------------| +* | | | | |mouse| SPACE | | END | LEFT| DOWN|RIGHT| +* `-----------------------------------------------------------------------' +*/ +[2] ={ +{KC_TILD,KC_EXLM,KC_AT, KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC }, +{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS,KC_EQL, KC_LCBR,KC_RCBR,KC_PIPE }, +{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN }, +{XXXXXXX,_______,_______,_______,_______,KC_SPC, KC_SPC, _______,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT} +}, +/* 4: fn layer (Window shortcuts) +* ,-----------------------------------------------------------------------. +* | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DEL | +* |-----------------------------------------------------------------------| +* | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | | +* |-----------------------------------------------------------------------| +* | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | | +* |-----------------------------------------------------------------------| +* | |DeskL|DeskR|DeskX|Task | ChangeLang| | | | | LED | +* `-----------------------------------------------------------------------' +*/ +[4] ={ +{KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX ,S(KC_CAPS) ,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DELT}, +{_______,LGUI(KC_LEFT) ,LGUI(KC_DOWN) ,LGUI(KC_RIGHT) ,XXXXXXX ,LALT(KC_CAPS),KC_CAPS,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX}, +{_______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX ,XXXXXXX ,LCTL(KC_CAPS),KC_SLCK,KC_HOME,XXXXXXX,KC_END,XXXXXXX,XXXXXXX}, +{KC_TRNS,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)),LGUI(LCTL(KC_F4)),LCTL(LALT(KC_DELT)),LGUI(KC_SPC),LGUI(KC_SPC),XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,M(0)} +}, +/* 10: mouse layer +* ,-----------------------------------------------------------------------. +* | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| |RESET| +* |-----------------------------------------------------------------------| +* | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | | +* |-----------------------------------------------------------------------| +* | | | | | | | |M_AC0|M_AC1|M_AC2| | | +* |-----------------------------------------------------------------------| +* | | | | | | GO_DEFT | | | | | | +* `-----------------------------------------------------------------------' +*/ +[10] ={ +{XXXXXXX,XXXXXXX,XXXXXXX,KC_MS_U,XXXXXXX,XXXXXXX,XXXXXXX,KC_WH_L,KC_WH_U,KC_WH_R,XXXXXXX,RESET}, +{XXXXXXX,XXXXXXX,KC_MS_L,KC_MS_D,KC_MS_R,XXXXXXX,XXXXXXX,KC_BTN1,KC_WH_D,KC_BTN2,XXXXXXX,XXXXXXX}, +{XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_ACL0,KC_ACL1,KC_ACL2,XXXXXXX,XXXXXXX}, +{XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX} +} + +}; +//Layout END + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + break; + case 1: + if (record->event.pressed) { + layer_on(1); + update_tri_layer(1, 2, 10); + } else { + layer_off(1); + update_tri_layer(1, 2, 10); + } + break; + case 2: + if (record->event.pressed) { + layer_on(2); + update_tri_layer(1, 2, 10); + } else { + layer_off(2); + update_tri_layer(1, 2, 10); + } + break; + case 99: + if (record->event.pressed) { + layer_off(10); + layer_off(1); + layer_off(2); + layer_on(0); + update_tri_layer(0 ,1 ,2); + } + break; + } + return MACRO_NONE; +};
\ No newline at end of file diff --git a/keyboards/planck/keymaps/tong92/readme.md b/keyboards/planck/keymaps/tong92/readme.md new file mode 100644 index 0000000000..328d005f6f --- /dev/null +++ b/keyboards/planck/keymaps/tong92/readme.md @@ -0,0 +1,66 @@ +# The Tong92 Layout +- MIT Layout +- my keymap for WIndow User +- Lower && Upper Hold -> Mouse Layer +- Mouse Layer : space -> Default Layer +- No Audio + +## 1. Default Layer - Qwerty + + ,-----------------------------------------------------------------------. + |Tab | q | w | e | r | t | y | u | i | o | p | BS | + |-----------------------------------------------------------------------| + |Ctrl | a | s | d | f | g | h | j | k | l | ; |enter| + |-----------------------------------------------------------------------| + |Shift| z | x | c | v | b | n | m | , | . | / |Shift| + |-----------------------------------------------------------------------| + | Fn |Ctrl | Win | Alt |Lower| Space |Upper| ' | [ | ] | Alt | + `-----------------------------------------------------------------------' + +## 2. Lower Layer + + ,-----------------------------------------------------------------------. + | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | BS | + |-----------------------------------------------------------------------| + | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | \ | + |-----------------------------------------------------------------------| + | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + |-----------------------------------------------------------------------| + | | | | | | SPACE |mouse| END | LEFT| DOWN|RIGHT| + `-----------------------------------------------------------------------' + +## 3. Upper Layer + + ,-----------------------------------------------------------------------. + | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | BS | + |-----------------------------------------------------------------------| + | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | | + |-----------------------------------------------------------------------| + | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + |-----------------------------------------------------------------------| + | | | | |mouse| SPACE | | END | LEFT| DOWN|RIGHT| + `-----------------------------------------------------------------------' + +## 4. Fn Layer - Window Shortcuts + + ,-----------------------------------------------------------------------. + | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DEL | + |-----------------------------------------------------------------------| + | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | | + |-----------------------------------------------------------------------| + | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | | + |-----------------------------------------------------------------------| + | |DeskL|DeskR|DeskX|Task | ChangeLang| | | | | LED | + `-----------------------------------------------------------------------' + +## 5. Mouse Layer + + ,-----------------------------------------------------------------------. + | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| |RESET| + |-----------------------------------------------------------------------| + | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | | + |-----------------------------------------------------------------------| + | | | | | | | |M_AC0|M_AC1|M_AC2| | | + |-----------------------------------------------------------------------| + | | | | | |GO_DEFAULT | | | | | | + `-----------------------------------------------------------------------'
\ No newline at end of file diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..192933b181 --- /dev/null +++ b/keyboards/planck/keymaps/xyverz/keymap.c @@ -0,0 +1,262 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | / | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Bksp |Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Mute | Vol- | Vol+ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Del | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______}, + {BACKLIT, _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | Play | Next | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Del | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______}, + {BACKLIT, _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/xyverz/makefile.mk b/keyboards/planck/keymaps/xyverz/makefile.mk new file mode 100644 index 0000000000..93a89bb4ab --- /dev/null +++ b/keyboards/planck/keymaps/xyverz/makefile.mk @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/planck.c b/keyboards/planck/planck.c index 8d70bb4e5a..645b450d1d 100644 --- a/keyboards/planck/planck.c +++ b/keyboards/planck/planck.c @@ -1,5 +1,15 @@ #include "planck.h" +#ifdef ONEHAND_ENABLE +__attribute__ ((weak)) +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, + {{11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}}, + {{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}}, + {{11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}}, +}; +#endif + void matrix_init_kb(void) { // Turn status LED on DDRE |= (1<<6); diff --git a/keyboards/planck/readme.md b/keyboards/planck/readme.md index f89fdeb931..4b24a690e0 100644 --- a/keyboards/planck/readme.md +++ b/keyboards/planck/readme.md @@ -13,15 +13,17 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|<name>] +$ make [default|jack|<name>] ``` + Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. ### Notable forks (which some of the keymap files are from) diff --git a/keyboards/planck/rev3/Makefile b/keyboards/planck/rev3/Makefile index 3ed1445e43..191c6bb664 100644 --- a/keyboards/planck/rev3/Makefile +++ b/keyboards/planck/rev3/Makefile @@ -1,5 +1,3 @@ -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif
\ No newline at end of file diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk new file mode 100644 index 0000000000..3ed1445e43 --- /dev/null +++ b/keyboards/planck/rev3/rules.mk @@ -0,0 +1,5 @@ +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/rev4/Makefile b/keyboards/planck/rev4/Makefile index ed09f85a4d..191c6bb664 100644 --- a/keyboards/planck/rev4/Makefile +++ b/keyboards/planck/rev4/Makefile @@ -1,5 +1,3 @@ -AUDIO_ENABLE ?= yes # Audio output on port C6 - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile endif
\ No newline at end of file diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk new file mode 100644 index 0000000000..ed09f85a4d --- /dev/null +++ b/keyboards/planck/rev4/rules.mk @@ -0,0 +1,5 @@ +AUDIO_ENABLE ?= yes # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk new file mode 100644 index 0000000000..25db53a315 --- /dev/null +++ b/keyboards/planck/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
\ No newline at end of file diff --git a/keyboards/preonic/Makefile b/keyboards/preonic/Makefile index 08e9205cbf..4e2a6f00fd 100644 --- a/keyboards/preonic/Makefile +++ b/keyboards/preonic/Makefile @@ -1,73 +1,3 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/preonic/keymaps/jacwib/Makefile b/keyboards/preonic/keymaps/jacwib/Makefile new file mode 100644 index 0000000000..3e87d41d36 --- /dev/null +++ b/keyboards/preonic/keymaps/jacwib/Makefile @@ -0,0 +1,20 @@ + + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/preonic/keymaps/jacwib/config.h b/keyboards/preonic/keymaps/jacwib/config.h new file mode 100644 index 0000000000..23e9e0ed28 --- /dev/null +++ b/keyboards/preonic/keymaps/jacwib/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define FORCE_NKRO 1 + +#endif diff --git a/keyboards/preonic/keymaps/jacwib/keymap.c b/keyboards/preonic/keymaps/jacwib/keymap.c new file mode 100644 index 0000000000..cf441bf309 --- /dev/null +++ b/keyboards/preonic/keymaps/jacwib/keymap.c @@ -0,0 +1,215 @@ +#include "preonic.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "keymap_nordic.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | + | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | Q | W | E | R | T | Y | U | I | O | P | Å | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | Ö | Ä | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| < | Z | X | C | V | B | N | M | . | , | - | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | GUI | Alt |AltGr |Lower | Space| Enter|Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, NO_PLUS, KC_BSPC}, + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AM }, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, NO_AE, NO_OSLH}, + {KC_LSFT, NO_LESS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_DOT, KC_COMM, NO_MINS}, + {KC_LCTL, KC_LGUI, KC_LALT, NO_ALGR, LOWER, KC_SPC, KC_ENT, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | | @ | £ | $ | | | { | [ | ] | } | \ | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | |VolUp | | | ~ | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | |LastS |PauseP|NextS | | * | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | |VolDwn| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | |Bspc | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {_______, NO_AT, NO_PND, NO_DLR, _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD}, + {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, LSFT(KC_BSLS)}, + {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ! | " | # | ¤ | % | & | / | ( | ) | = | ? | Ins | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |Mouse^| | | | |ScrlUp| | | ^ | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | |Mouse<|MouseV|Mouse>| | |MLC |MMC |MRC | ' | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | > | | | | | | |ScrlDown| : | ; | _ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | |Bspc | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {LSFT(KC_1),NO_QUO2,LSFT(KC_3), NO_BULT,LSFT(KC_5), NO_AMPR, NO_SLSH, NO_LPRN, NO_RPRN, NO_EQL, NO_QUES, KC_INS}, + {_______, _______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, NO_CIRC}, + {_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN3, KC_BTN2, NO_APOS, NO_QUOT}, + {_______, NO_GRTR, _______, _______, _______, _______, _______, _______, KC_WH_D, NO_COLN, NO_SCLN, NO_UNDS}, + {_______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______, _______} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | Reset| | | | | | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | |Rsft | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |MusOn |MusOff| | | | | | | | | Reset| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {_______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT}, + {_______, MU_ON, MU_OFF, _______, _______, _______, _______, _______, _______, _______, _______, RESET }, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/preonic/keymaps/jacwib/readme.md b/keyboards/preonic/keymaps/jacwib/readme.md new file mode 100644 index 0000000000..0660312353 --- /dev/null +++ b/keyboards/preonic/keymaps/jacwib/readme.md @@ -0,0 +1,3 @@ +# Jacwib's preonic keymap. + +Designed for use with a swedish language. diff --git a/keyboards/preonic/keymaps/kinesis/Makefile b/keyboards/preonic/keymaps/kinesis/Makefile new file mode 100644 index 0000000000..6c8d2897cd --- /dev/null +++ b/keyboards/preonic/keymaps/kinesis/Makefile @@ -0,0 +1,27 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +TAP_DANCE_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/preonic/keymaps/kinesis/config.h b/keyboards/preonic/keymaps/kinesis/config.h new file mode 100644 index 0000000000..086baa84ff --- /dev/null +++ b/keyboards/preonic/keymaps/kinesis/config.h @@ -0,0 +1,92 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6061 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Preonic Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 12 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D2, D5, B5, B6, D3 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D1 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 28 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +#define TAPPING_TERM 200 + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/preonic/keymaps/kinesis/keymap.c b/keyboards/preonic/keymaps/kinesis/keymap.c new file mode 100644 index 0000000000..9691be91d9 --- /dev/null +++ b/keyboards/preonic/keymaps/kinesis/keymap.c @@ -0,0 +1,144 @@ +#include "preonic.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE +#include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _FN 1 +#define _ULCK 2 + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define HYP_TIC ALL_T(KC_GRV) +#define EQ_LOCK TD(TD_EQ_LOCK) +#define MIN_ULK TD(TD_MIN_ULOCK) + +//Tap Dance Declarations +enum { + TD_EQ_LOCK = 0, + TD_MIN_ULOCK +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | \ | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Shift | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | FN | ` | Alt | LGUI | Back | ESC |ENTER | SPCE | RGUI | [ | ] | FN | + * `-----------------------------------------------------------------------------------' + */ + [_QWERTY] = { + {EQ_LOCK, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, MIN_ULK }, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS }, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + {KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC }, + {MO(_FN), HYP_TIC, KC_LALT, KC_LGUI, KC_BSPC, KC_ESC, KC_ENT, KC_SPC, KC_RGUI, KC_LBRC, KC_RBRC, MO(_FN) } + }, + + /* Fn + * ,-----------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | VOL- | VOL+ | MUTE |BLtogg| | LEFT | DOWN | UP | RGHT | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | BL- | BL+ |Aud on|AudOff|AGnorm|AGswap| | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|MusOff| | |PLY/PS| | PREV | NEXT | | + * `-----------------------------------------------------------------------------------' + */ + [_FN] = { + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______ }, + {_______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, _______ }, + {_______, KC_VOLD, KC_VOLU, KC_MUTE, BL_TOGG, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______ }, + {_______, BL_DEC, BL_INC, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______ }, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, _______, _______, KC_MPLY, _______, KC_MPRV, KC_MNXT, _______ } + } + +}; + +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} +}; + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +/*bool process_record_user(uint16_t keycode, keyrecord_t *record) {*/ + /*return true;*/ + /*[>switch (keycode) {<]*/ + /*[>case QWERTY:<]*/ + /*[>return true;<]*/ + /*[>}<]*/ +/*};*/ + +void matrix_init_user(void) { + startup_user(); +} + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + + +qk_tap_dance_action_t tap_dance_actions[] = { + //Tap once for equal, twice for hyper + X (alfred lock) + [TD_EQ_LOCK] = ACTION_TAP_DANCE_DOUBLE(KC_EQL, HYPR(KC_X)), + //Tap once for minus, twice for time.heals.nothing + [TD_MIN_ULOCK] = ACTION_TAP_DANCE_DOUBLE(KC_MINS, M(_ULCK)) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _ULCK: + if (record->event.pressed) { + /* time.heals.nothing */ + return MACRO( I(220), T(T), T(I), T(M), T(E), T(DOT), T(H), T(E), T(A), T(L), T(S), T(DOT), T(N), T(O), T(T), T(H), T(I), T(N), T(G), END); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/preonic/keymaps/kinesis/readme.md b/keyboards/preonic/keymaps/kinesis/readme.md new file mode 100644 index 0000000000..e911968dd9 --- /dev/null +++ b/keyboards/preonic/keymaps/kinesis/readme.md @@ -0,0 +1 @@ +# The default Preonic layout - largely based on the Planck's
\ No newline at end of file diff --git a/keyboards/preonic/keymaps/xyverz/keymap.c b/keyboards/preonic/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..adc7392e5c --- /dev/null +++ b/keyboards/preonic/keymaps/xyverz/keymap.c @@ -0,0 +1,342 @@ +#include "preonic.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _MUSIC 5 +#define _ADJUST 16 + +// Macro name shortcuts +#define QWERTY M(_QWERTY) +#define COLEMAK M(_COLEMAK) +#define DVORAK M(_DVORAK) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) +#define M_BL 5 +#define AUD_OFF M(6) +#define AUD_ON M(7) +#define MUS_OFF M(8) +#define MUS_ON M(9) +#define VC_IN M(10) +#define VC_DE M(11) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | - | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL}, + {KC_MINS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_SPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | " | , | . | P | Y | F | G | C | R | L | / | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_SPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Mute | Vol- | Vol+ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______}, + {M(M_BL), _______, KC_HOME, KC_END, _______, KC_INS, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | Play | Next | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______}, + {M(M_BL), _______, KC_HOME, KC_END, _______, KC_INS, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Music (reserved for process_action_user) + * + */ +[_MUSIC] = { + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER, XXXXXXX, XXXXXXX, RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Audoff|Aud on|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Musoff|Mus on| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AUD_ON, AUD_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, + {_______, VC_DE, VC_IN, MUS_ON, MUS_OFF, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +#ifdef AUDIO_ENABLE +float start_up[][2] = { + {440.0*pow(2.0,(14)/12.0), 20}, + {440.0*pow(2.0,(26)/12.0), 8}, + {440.0*pow(2.0,(18)/12.0), 20}, + {440.0*pow(2.0,(26)/12.0), 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + break; + case _COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + break; + case _DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + break; + case _LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case _RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case M_BL: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + case 6: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + audio_off(); + #endif + } + break; + case 7: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + audio_on(); + PLAY_NOTE_ARRAY(start_up, false, 0); + #endif + } + break; + case 8: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + layer_off(_MUSIC); + stop_all_notes(); + #endif + } + break; + case 9: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(music_scale, false, 0); + layer_on(_MUSIC); + #endif + } + break; + case 10: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + voice_iterate(); + PLAY_NOTE_ARRAY(music_scale, false, 0); + #endif + } + break; + case 11: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + voice_deiterate(); + PLAY_NOTE_ARRAY(music_scale, false, 0); + #endif + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(start_up, false, 0); + #endif +} + +#ifdef AUDIO_ENABLE + +uint8_t starting_note = 0x0C; +int offset = 7; + +void process_action_user(keyrecord_t *record) { + + if (IS_LAYER_ON(_MUSIC)) { + if (record->event.pressed) { + play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF); + } else { + stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row))); + } + } + +} + +void play_goodbye_tone() +{ + PLAY_NOTE_ARRAY(goodbye, false, 0); + _delay_ms(150); +} + +#endif
\ No newline at end of file diff --git a/keyboards/preonic/keymaps/xyverz/makefile.mk b/keyboards/preonic/keymaps/xyverz/makefile.mk new file mode 100644 index 0000000000..628167ff66 --- /dev/null +++ b/keyboards/preonic/keymaps/xyverz/makefile.mk @@ -0,0 +1 @@ +AUDIO_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/preonic/preonic.c b/keyboards/preonic/preonic.c index 889c3fc8fd..d9c119b8da 100644 --- a/keyboards/preonic/preonic.c +++ b/keyboards/preonic/preonic.c @@ -1,5 +1,16 @@ #include "preonic.h" +#ifdef ONEHAND_ENABLE +__attribute__ ((weak)) +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, + {{11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}}, + {{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}}, + {{11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}}, + {{11, 4}, {10, 4}, {9, 4}, {8, 4}, {7, 4}, {6, 4}, {5, 4}, {4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}}, +}; +#endif + void matrix_init_kb(void) { // Turn status LED on diff --git a/keyboards/preonic/readme.md b/keyboards/preonic/readme.md index f0be255a09..10763ee97a 100644 --- a/keyboards/preonic/readme.md +++ b/keyboards/preonic/readme.md @@ -13,13 +13,15 @@ Download or clone the whole firmware and navigate to the keyboards/preonic folde Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap, create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|<name>] +$ make [default|jack|<name>] ``` + Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk new file mode 100644 index 0000000000..d0f3a3a1c0 --- /dev/null +++ b/keyboards/preonic/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
\ No newline at end of file diff --git a/keyboards/readme.md b/keyboards/readme.md index f6c90b1f63..81a23c7e55 100644 --- a/keyboards/readme.md +++ b/keyboards/readme.md @@ -9,37 +9,47 @@ These keyboards are manufactured by the maintainers of QMK. What makes OLKB keyboards shine is a combo of lean aesthetics, compact size, and killer tactile feel. These are available through [olkb.com](http://olkb.com) as well as through [Massdrop](http://massdrop.com) from time to time, as easy to assemble kits. -* [Planck](/keyboards/planck/) - A 40% DIY powerhouse of customizability and modification capability. It's a lean, mean, typing machine. -* [Preonic](/keyboards/preonic/) - Like the Planck, but bigger. 50%. -* [Atomic](/keyboards/atomic/) - Imagine the size of the Planck. Now imagine the size of the Preonic. Now imagine _bigger_. That is the Atomic. A 60% keyboard. +* [Planck](/keyboards/planck/) — A 40% DIY powerhouse of customizability and modification capability. It's a lean, mean, typing machine. +* [Preonic](/keyboards/preonic/) — Like the Planck, but bigger. 50%. +* [Atomic](/keyboards/atomic/) — Imagine the size of the Planck. Now imagine the size of the Preonic. Now imagine _bigger_. That is the Atomic. A 60% keyboard. ### ErgoDox EZ - Erez Zukerman Made in Taiwan using advanced robotic manufacturing, the ErgoDox EZ is a fully-assembled, premium ergonomic keyboard. Its split design allows you to place both halves shoulder width, and its custom-made wrist rests and tilt/tent kit make for incredibly comfortable typing. Available on [ergodox-ez.com](https://ergodox-ez.com). -* [ErgoDox EZ](/keyboards/ergodox/) - Our one and only product. Yes, it's that awesome. Comes with either printed or blank keycaps, and 7 different keyswitch types. +* [ErgoDox EZ](/keyboards/ergodox/) — Our one and only product. Yes, it's that awesome. Comes with either printed or blank keycaps, and 7 different keyswitch types. ### Clueboard - Zach White Designed and built in Felton, CA, Clueboards keyboard emphasize quality and locally sourced components, available on [clueboard.co](http://clueboard.co) -* [Clueboard](/keyboards/clueboard/) - The 66% custom keyboard. -* [Cluepad](/keyboards/cluepad/) - A mechanical numpad with QMK superpowers. +* [Clueboard](/keyboards/clueboard/) — The 66% custom keyboard. +* [Cluecard](/keyboards/cluecard/) — A small board to help you hack on QMK. +* [Cluepad](/keyboards/cluepad/) — A mechanical numpad with QMK superpowers. ## Community-supported QMK Keyboards These keyboards are part of the QMK repository, but their manufacturers are not official maintainers of the repository. -* [alps64](/keyboards/alps64/) — A 60% keyboard for Alps keyswitches. -* [arrow_pad](/keyboards/arrow_pad) — A custom creation by IBNobody. -* [atreus](/keyboards/atreus) — Made by Technomancy. -* [bantam44](/keyboards/bantam44) — It is a 44-key 40% staggered keyboard. -* [gh60](/keyboards/gh60) — A 60% Geekhack community-driven project. -* [hhkb](/keyboards/hhkb) — The Happy Hacking keyboard can be hacked with a custom controller to run QMK. -* [jd45](/keyboards/jd45) — Another Geekhack community project, designed by jdcarpe. -* [kc60](/keyboards/kc60) — A programmable Chinese-made keyboard, lost in the mists of time. -* [phantom](/keyboards/phantom) — A tenkeyless kit by Teel, also from Geekhack. -* [retro_refit](/keyboards/retro_refit) — Another creation by IBNobody. -* [satan](/keyboards/satan) — A GH60 variant. -* [sixkeyboard](/keyboards/sixkeyboard) — A 6-key keyboard made by TechKeys. +* [Alps64](/keyboards/alps64) — A 60% keyboard for Alps keyswitches. +* [AMJ60](/keyboards/amj60) — DIY/Assembled compact 60% keyboard. +* [Arrow Pad](/keyboards/arrow_pad) — A custom creation by IBNobody. +* [Atreus](/keyboards/atreus) — Made by Technomancy. +* [Bantam44](/keyboards/bantam44) — It is a 44-key 40% staggered keyboard. +* [Ergodox Infinity](/keyboards/ergodox) - Ergonomic Split Keyboard by Input Club. +* [GH60](/keyboards/gh60) — A 60% Geekhack community-driven project. +* [Happy Hacking Keyboard](/keyboards/hhkb) — The Happy Hacking keyboard can be hacked with a custom controller to run QMK. +* [Infinity 60%](/keyboards/infinity60) - — Compact community keyboard by Input Club. +* [JD45](/keyboards/jd45) — Another Geekhack community project, designed by jdcarpe. +* [KC60](/keyboards/kc60) — A programmable Chinese-made keyboard, lost in the mists of time. +* [Kinesis Advantage](/keyboards/kinesis) — Contoured ergonomic keyboard by Kinesis Computer Ergonomics. +* [The Kitten Paw](/keyboards/kitten_paw) — A replacement controller (2016 revision) for the Filco Majestouch by [Bathroom Epiphanies](https://github.com/BathroomEpiphanies). +* [Lets Split](/keyboards/lets_split) - Split ortholinear 40% keyboard. +* [Phantom](/keyboards/phantom) — A tenkeyless kit by Teel, also from Geekhack. +* [Retro Refit](/keyboards/retro_refit) — Another creation by IBNobody. +* [S60-x](/keyboards/s60-x) — DIY compact keyboard designed by VinnyCordeiro for Sentraq. +* [Satan](/keyboards/satan) — A GH60 variant. +* [SixKeyBoard](/keyboards/sixkeyboard) — A 6-key keyboard made by TechKeys. +* [TheVan 44](/keyboars/tv44) — A 44-key staggered keybard by Evangs. +* [Vision Division](/keyboards/vision_division) — Full Size / Split Linear Keyboard by IBNobody. diff --git a/keyboards/retro_refit/readme.md b/keyboards/retro_refit/readme.md deleted file mode 100644 index b01a1a9ca9..0000000000 --- a/keyboards/retro_refit/readme.md +++ /dev/null @@ -1,24 +0,0 @@ -retro_refit keyboard firmware -====================== - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme.md](/readme.md). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/retro_refit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build with the default keymap, simply run `make`. - -### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. - -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: -``` -$ make KEYMAP=[default|jack|<name>] -``` -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/s60-x/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/s60-x/config.h b/keyboards/s60-x/config.h new file mode 100644 index 0000000000..ac7951c247 --- /dev/null +++ b/keyboards/s60-x/config.h @@ -0,0 +1,164 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2016 Julien Pecqueur <julien@peclu.net> +Copyright 2016 Felix Uhl <ifreilicht@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Massdrop +#define PRODUCT S60-X +#define DESCRIPTION q.m.k. keyboard firmware for S60-X + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 } +#define UNUSED_PINS { F0 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/Makefile b/keyboards/s60-x/keymaps/ansi_qwertz/Makefile new file mode 100644 index 0000000000..6a078bcc3f --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/config.h b/keyboards/s60-x/keymaps/ansi_qwertz/config.h new file mode 100644 index 0000000000..6c01d579f8 --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/config.h @@ -0,0 +1,14 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// keymap needs oneshot functionality +#undef NO_ACTION_ONESHOT + +#undef IS_COMMAND +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#endif
\ No newline at end of file diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.png b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.png Binary files differnew file mode 100644 index 0000000000..168780c824 --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.png diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg new file mode 100644 index 0000000000..f03858993e --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg @@ -0,0 +1,1046 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="900" + height="300" + id="svg2" + sodipodi:version="0.32" + inkscape:version="0.91 r13725" + version="1.0" + sodipodi:docname="KB_US-International-Alternative.svg" + inkscape:output_extension="org.inkscape.output.svg.inkscape"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow1Lend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Lend" + style="overflow:visible;"> + <path + id="path5387" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;" + transform="scale(0.8) rotate(180)" /> + </marker> + <marker + inkscape:stockid="Arrow1Lstart" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Lstart" + style="overflow:visible"> + <path + id="path5390" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none" + transform="scale(0.8)" /> + </marker> + <marker + inkscape:stockid="Tail" + orient="auto" + refY="0.0" + refX="0.0" + id="Tail" + style="overflow:visible"> + <g + id="g5342" + transform="scale(-1.2)"> + <path + id="path5344" + d="M -3.8048674,-3.9585227 L 0.54352094,-0.00068114835" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5346" + d="M -1.2866832,-3.9585227 L 3.0617053,-0.00068114835" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5348" + d="M 1.3053582,-3.9585227 L 5.6537466,-0.00068114835" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5350" + d="M -3.8048674,4.1775838 L 0.54352094,0.21974226" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5352" + d="M -1.2866832,4.1775838 L 3.0617053,0.21974226" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5354" + d="M 1.3053582,4.1775838 L 5.6537466,0.21974226" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + </g> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Mend" + style="overflow:visible;"> + <path + id="path5363" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(0.6) rotate(180) translate(-5,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Lend" + style="overflow:visible;"> + <path + id="path5369" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(1.1) rotate(180) translate(-5,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Send" + style="overflow:visible;"> + <path + id="path5375" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;" + transform="scale(0.2) rotate(180)" /> + </marker> + <marker + inkscape:stockid="Arrow2Send" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Send" + style="overflow:visible;"> + <path + id="path5357" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(0.3) rotate(180) translate(-5,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path5381" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;" + transform="scale(0.4) rotate(180)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path5372" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(1.1) translate(-5,0)" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.4142136" + inkscape:cx="435.66801" + inkscape:cy="291.15819" + inkscape:document-units="px" + inkscape:current-layer="layer1" + inkscape:grid-points="true" + showgrid="true" + gridtolerance="15px" + showborder="false" + inkscape:window-width="1920" + inkscape:window-height="1017" + inkscape:window-x="1912" + inkscape:window-y="-8" + showguides="true" + inkscape:guide-bbox="true" + inkscape:grid-bbox="true" + inkscape:window-maximized="1"> + <inkscape:grid + id="GridFromPre046Settings" + type="xygrid" + originx="0px" + originy="0px" + spacingx="7.5px" + spacingy="7.5px" + color="#0000ff" + empcolor="#0000ff" + opacity="0.12156863" + empopacity="0.25098039" + empspacing="4" /> + </sodipodi:namedview> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1"> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,0 L 60,0 L 60,60 L 0,60 L 0,0 z " + id="rect2186" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 60,0 L 120,0 L 120,60 L 60,60 L 60,0 z " + id="rect2218" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 120,0 L 180,0 L 180,60 L 120,60 L 120,0 z " + id="rect2222" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 180,0 L 240,0 L 240,60 L 180,60 L 180,0 z " + id="rect2228" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 240,0 L 300,0 L 300,60 L 240,60 L 240,0 z " + id="rect2230" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 300,0 L 360,0 L 360,60 L 300,60 L 300,0 z " + id="rect2232" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 360,0 L 420,0 L 420,60 L 360,60 L 360,0 z " + id="rect2234" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 420,0 L 480,0 L 480,60 L 420,60 L 420,0 z " + id="rect2236" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 480,0 L 540,0 L 540,60 L 480,60 L 480,0 z " + id="rect2238" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 540,0 L 600,0 L 600,60 L 540,60 L 540,0 z " + id="rect2240" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 600,0 L 660,0 L 660,60 L 600,60 L 600,0 z " + id="rect2242" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 660,0 L 720,0 L 720,60 L 660,60 L 660,0 z " + id="rect2244" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 720,0 L 780,0 L 780,60 L 720,60 L 720,0 z " + id="rect2246" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 780,0 L 900,0 L 900,60 L 780,60 L 780,0 z " + id="rect2248" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,60 L 90,60 L 90,120 L 0,120 L 0,60 z " + id="rect2250" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 90,60 L 150,60 L 150,120 L 90,120 L 90,60 z " + id="rect2252" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 150,60 L 210,60 L 210,120 L 150,120 L 150,60 z " + id="rect2254" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 210,60 L 270,60 L 270,120 L 210,120 L 210,60 z " + id="rect2256" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 270,60 L 330,60 L 330,120 L 270,120 L 270,60 z " + id="rect2258" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 330,60 L 390,60 L 390,120 L 330,120 L 330,60 z " + id="rect2262" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 390,60 L 450,60 L 450,120 L 390,120 L 390,60 z " + id="rect2264" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 450,60 L 510,60 L 510,120 L 450,120 L 450,60 z " + id="rect2266" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 510,60 L 570,60 L 570,120 L 510,120 L 510,60 z " + id="rect2270" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 570,60 L 630,60 L 630,120 L 570,120 L 570,60 z " + id="rect2272" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 630,60 L 690,60 L 690,120 L 630,120 L 630,60 z " + id="rect2274" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 690,60 L 750,60 L 750,120 L 690,120 L 690,60 z " + id="rect2278" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 750,60 L 810,60 L 810,120 L 750,120 L 750,60 z " + id="rect2280" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 810,60 L 900,60 L 900,120 L 810,120 L 810,60 z " + id="rect2284" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,120 L 105,120 L 105,180 L 0,180 L 0,120 z " + id="rect2286" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 105,120 L 165,120 L 165,180 L 105,180 L 105,120 z " + id="rect2292" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 165,120 L 225,120 L 225,180 L 165,180 L 165,120 z " + id="rect2296" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 225,120 L 285,120 L 285,180 L 225,180 L 225,120 z " + id="rect2298" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 285,120 L 345,120 L 345,180 L 285,180 L 285,120 z " + id="rect2300" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 345,120 L 405,120 L 405,180 L 345,180 L 345,120 z " + id="rect2302" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 405,120 L 465,120 L 465,180 L 405,180 L 405,120 z " + id="rect2306" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 465,120 L 525,120 L 525,180 L 465,180 L 465,120 z " + id="rect2308" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 525,120 L 585,120 L 585,180 L 525,180 L 525,120 z " + id="rect2312" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 585,120 L 645,120 L 645,180 L 585,180 L 585,120 z " + id="rect2314" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 645,120 L 705,120 L 705,180 L 645,180 L 645,120 z " + id="rect2316" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 705,120 L 765,120 L 765,180 L 705,180 L 705,120 z " + id="rect2318" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 765,120 L 900,120 L 900,180 L 765,180 L 765,120 z " + id="rect2320" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,180 L 135,180 L 135,240 L 0,240 L 0,180 z " + id="rect2322" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 135,180 L 195,180 L 195,240 L 135,240 L 135,180 z " + id="rect2324" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 195,180 L 255,180 L 255,240 L 195,240 L 195,180 z " + id="rect2326" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 255,180 L 315,180 L 315,240 L 255,240 L 255,180 z " + id="rect2330" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 315,180 L 375,180 L 375,240 L 315,240 L 315,180 z " + id="rect2334" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 375,180 L 435,180 L 435,240 L 375,240 L 375,180 z " + id="rect2336" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 435,180 L 495,180 L 495,240 L 435,240 L 435,180 z " + id="rect2338" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 495,180 L 555,180 L 555,240 L 495,240 L 495,180 z " + id="rect2340" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 555,180 L 615,180 L 615,240 L 555,240 L 555,180 z " + id="rect2342" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 615,180 L 675,180 L 675,240 L 615,240 L 615,180 z " + id="rect2344" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 675,180 L 735,180 L 735,240 L 675,240 L 675,180 z " + id="rect2346" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 735,180 L 900,180 L 900,240 L 735,240 L 735,180 z " + id="rect2348" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,240 L 90,240 L 90,300 L 0,300 L 0,240 z " + id="rect2350" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 810,240 L 900,240 L 900,300 L 810,300 L 810,240 z " + id="rect2352" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 150,240 L 240,240 L 240,300 L 150,300 L 150,240 z " + id="rect2354" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 600,240 L 690,240 L 690,300 L 600,300 L 600,240 z " + id="rect2360" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 240,240 L 600,240 L 600,300 L 240,300 L 240,240 z " + id="rect2362" /> + <path + style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 90,240 L 150,240 L 150,300 L 90,300 L 90,240 z " + id="rect2364" /> + <path + style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 690,240 L 750,240 L 750,300 L 690,300 L 690,240 z " + id="rect2366" /> + <path + style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 750,240 L 810,240 L 810,300 L 750,300 L 750,240 z " + id="rect2368" /> + <path + style="" + d="" + id="flowRoot4146" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 75.351563,18.826172 L 74.4375,11.056641 L 74.4375,6.3691406 L 78.046875,6.3691406 L 78.046875,11.056641 L 77.132813,18.826172 L 75.351563,18.826172 M 74.484375,23.630859 L 74.484375,20.173828 L 77.964844,20.173828 L 77.964844,23.630859 L 74.484375,23.630859 M 75.351563,53.630859 L 75.351563,42.158203 L 71.34375,42.158203 L 71.34375,39.802734 L 71.601563,39.802734 C 73.062496,39.802748 74.124995,39.576186 74.789063,39.123047 C 75.460931,38.669937 75.855462,37.912125 75.972656,36.849609 L 78.65625,36.849609 L 78.65625,53.630859 L 75.351563,53.630859" + id="text5091" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 23.34375,14.220703 L 23.34375,16.810547 C 22.531233,17.365241 21.761702,17.775396 21.035156,18.041016 C 20.316391,18.298833 19.605455,18.42774 18.902344,18.427734 C 18.542956,18.42774 18.183581,18.39649 17.824219,18.333984 C 17.464832,18.27149 17.105457,18.181646 16.746094,18.064453 C 16.558583,18.001959 16.281239,17.904303 15.914063,17.771484 C 14.203116,17.185553 12.902336,16.892585 12.011719,16.892578 C 11.34765,16.892585 10.652339,17.041022 9.9257813,17.337891 C 9.2070275,17.626959 8.3984345,18.091802 7.5,18.732422 L 7.5,16.142578 C 8.3359346,15.580086 9.1328088,15.162118 9.890625,14.888672 C 10.648432,14.607431 11.363275,14.466806 12.035156,14.466797 C 12.949211,14.466806 14.085929,14.693368 15.445313,15.146484 C 15.46874,15.154305 15.484365,15.158212 15.492188,15.158203 C 15.632802,15.205087 15.847646,15.279305 16.136719,15.380859 C 17.347644,15.810555 18.285143,16.025398 18.949219,16.025391 C 19.613267,16.025398 20.29686,15.880867 21,15.591797 C 21.703109,15.302743 22.484358,14.845712 23.34375,14.220703 M 11.988281,35.033203 L 15.011719,35.033203 L 17.320313,39.369141 L 15.65625,39.369141 L 11.988281,35.033203" + id="text5103" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 136.47578,20.443359 C 136.04608,21.099612 135.54999,21.583986 134.9875,21.896484 C 134.42499,22.201173 133.76093,22.353517 132.99532,22.353516 C 131.76093,22.353517 130.81953,22.01758 130.1711,21.345703 C 129.53047,20.673831 129.21015,19.681645 129.21016,18.369141 C 129.21015,16.50196 129.75312,14.935556 130.83907,13.669922 C 131.93281,12.404308 133.27656,11.771496 134.87032,11.771484 C 135.4953,11.771496 136.03827,11.900402 136.49922,12.158203 C 136.96015,12.416027 137.33905,12.798839 137.63594,13.306641 L 138.25703,12.158203 L 140.34297,12.158203 L 138.62032,19.166016 C 138.59686,19.251958 138.57733,19.341801 138.56172,19.435547 C 138.54608,19.521488 138.53827,19.591801 138.53828,19.646484 C 138.53827,19.919926 138.63202,20.126957 138.81953,20.267578 C 139.00702,20.400394 139.28436,20.4668 139.65157,20.466797 C 139.95624,20.4668 140.27264,20.388675 140.60078,20.232422 C 140.9367,20.076175 141.2492,19.857426 141.53828,19.576172 C 142.21014,18.951177 142.71795,18.220709 143.06172,17.384766 C 143.41326,16.548835 143.58904,15.630867 143.58907,14.630859 C 143.58904,12.75587 142.86248,11.216809 141.40938,10.013672 C 139.96405,8.8027492 138.09686,8.1972811 135.80782,8.1972656 C 134.70624,8.1972811 133.6789,8.3300934 132.72578,8.5957031 C 131.78046,8.8613429 130.92109,9.2558737 130.14766,9.7792969 C 128.81953,10.669935 127.79609,11.783215 127.07735,13.119141 C 126.36641,14.455087 126.01094,15.91993 126.01094,17.513672 C 126.01094,19.912113 126.81953,21.83008 128.43672,23.267578 C 130.0539,24.697265 132.21406,25.412108 134.91719,25.412109 C 136.1828,25.412108 137.41718,25.220702 138.62032,24.837891 C 139.83124,24.455077 140.95623,23.90039 141.99532,23.173828 L 142.95625,24.544922 C 141.76092,25.443358 140.49139,26.119138 139.14766,26.572266 C 137.81171,27.025387 136.41718,27.25195 134.96407,27.251953 C 133.46405,27.25195 132.08515,27.060543 130.82735,26.677734 C 129.56953,26.302732 128.45234,25.744139 127.47578,25.001953 C 126.26484,24.05664 125.35859,22.966798 124.75703,21.732422 C 124.15547,20.49805 123.85469,19.099614 123.85469,17.537109 C 123.85469,16.232429 124.05781,14.990243 124.46407,13.810547 C 124.87813,12.623058 125.48359,11.544934 126.28047,10.576172 C 127.43672,9.1621238 128.82734,8.0918124 130.45235,7.3652344 C 132.07734,6.6386889 133.88593,6.275408 135.87813,6.2753906 C 137.19843,6.275408 138.43671,6.4550953 139.59297,6.8144531 C 140.75702,7.1660321 141.76873,7.6660316 142.62813,8.3144531 C 143.68279,9.1347801 144.46795,10.072279 144.9836,11.126953 C 145.50701,12.17384 145.76873,13.357432 145.76875,14.677734 C 145.76873,15.966805 145.51092,17.15821 144.99532,18.251953 C 144.48748,19.337895 143.75311,20.267581 142.79219,21.041016 C 142.2453,21.478518 141.64764,21.814455 140.99922,22.048828 C 140.35858,22.275392 139.69061,22.388673 138.99532,22.388672 C 138.16718,22.388673 137.54218,22.224611 137.12032,21.896484 C 136.70624,21.568361 136.4914,21.083987 136.47578,20.443359 M 137.06172,15.427734 C 136.96015,14.794931 136.73358,14.314462 136.38203,13.986328 C 136.03827,13.650401 135.58124,13.482432 135.01094,13.482422 C 134.1203,13.482432 133.34687,13.966807 132.69063,14.935547 C 132.03437,15.904305 131.70624,17.068366 131.70625,18.427734 C 131.70624,19.146489 131.86249,19.693363 132.175,20.068359 C 132.49531,20.443363 132.95624,20.630862 133.55782,20.630859 C 134.20624,20.630862 134.79608,20.384769 135.32735,19.892578 C 135.8664,19.400395 136.23358,18.75977 136.42891,17.970703 L 137.06172,15.427734 M 128.56563,53.630859 C 128.58125,52.130861 128.90156,50.861331 129.52657,49.822266 C 130.15156,48.775395 131.26094,47.716803 132.85469,46.646484 C 133.09687,46.482429 133.44844,46.255867 133.90938,45.966797 C 136.01875,44.615243 137.07343,43.314463 137.07344,42.064453 C 137.07343,41.322278 136.85078,40.736341 136.40547,40.306641 C 135.96015,39.876967 135.35078,39.662123 134.57735,39.662109 C 133.73359,39.662123 133.08125,39.927748 132.62032,40.458984 C 132.16719,40.982435 131.94062,41.732434 131.94063,42.708984 L 131.94063,42.849609 L 128.84688,42.849609 C 128.84688,40.927747 129.3625,39.44728 130.39375,38.408203 C 131.425,37.369157 132.89375,36.849626 134.8,36.849609 C 136.52656,36.849626 137.90546,37.322282 138.93672,38.267578 C 139.96796,39.205093 140.48358,40.455091 140.4836,42.017578 C 140.48358,43.134776 140.21405,44.103525 139.675,44.923828 C 139.13593,45.744149 138.09296,46.677741 136.5461,47.724609 C 136.21796,47.951178 135.76484,48.248052 135.18672,48.615234 C 133.71797,49.560551 132.88984,50.2793 132.70235,50.771484 L 140.31953,50.771484 L 140.31953,53.630859 L 128.56563,53.630859" + id="text5127" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 195.28125,13.693359 L 194.25,16.552734 L 197.19141,16.552734 L 198.19922,13.693359 L 195.28125,13.693359 M 195.28125,6.4746094 L 197.87109,6.4746094 L 196.16016,11.337891 L 198.99609,11.337891 L 200.73047,6.4746094 L 203.32031,6.4746094 L 201.58594,11.337891 L 204.90234,11.337891 L 204.03516,13.693359 L 200.75391,13.693359 L 199.76953,16.529297 L 203.16797,16.529297 L 202.33594,18.873047 L 198.92578,18.873047 L 197.19141,23.748047 L 194.60156,23.748047 L 196.33594,18.873047 L 193.47656,18.873047 L 191.73047,23.748047 L 189.15234,23.748047 L 190.86328,18.873047 L 187.5,18.873047 L 188.39063,16.529297 L 191.69531,16.529297 L 192.70313,13.693359 L 189.19922,13.693359 L 190.06641,11.337891 L 193.54688,11.337891 L 195.28125,6.4746094 M 190.07813,48.521484 L 193.30078,48.521484 C 193.30859,49.458989 193.53515,50.166019 193.98047,50.642578 C 194.42578,51.111331 195.08593,51.345705 195.96094,51.345703 C 196.80468,51.345705 197.45312,51.126956 197.90625,50.689453 C 198.36718,50.244144 198.59765,49.607426 198.59766,48.779297 C 198.59765,47.951178 198.32812,47.326178 197.78906,46.904297 C 197.2578,46.474617 196.46484,46.259773 195.41016,46.259766 C 195.35546,46.259773 195.26953,46.263679 195.15234,46.271484 C 195.04296,46.279304 194.96093,46.28321 194.90625,46.283203 L 194.90625,43.962891 L 195.26953,43.962891 C 196.23827,43.9629 196.95312,43.7754 197.41406,43.400391 C 197.8828,43.017589 198.11718,42.435558 198.11719,41.654297 C 198.11718,41.005872 197.91796,40.494154 197.51953,40.119141 C 197.1289,39.736342 196.59374,39.544936 195.91406,39.544922 C 195.17187,39.544936 194.59765,39.763686 194.19141,40.201172 C 193.78515,40.638685 193.58203,41.259778 193.58203,42.064453 L 193.58203,42.205078 L 190.41797,42.205078 C 190.45703,40.486341 190.96094,39.169936 191.92969,38.255859 C 192.90625,37.334001 194.28125,36.873064 196.05469,36.873047 C 197.73437,36.873064 199.0664,37.283219 200.05078,38.103516 C 201.03514,38.923843 201.52733,40.02931 201.52734,41.419922 C 201.52733,42.154308 201.35936,42.798839 201.02344,43.353516 C 200.68749,43.908213 200.18358,44.365244 199.51172,44.724609 C 200.37108,45.099618 201.01952,45.619149 201.45703,46.283203 C 201.90233,46.93946 202.12499,47.724615 202.125,48.638672 C 202.12499,50.318363 201.57421,51.650393 200.47266,52.634766 C 199.37108,53.619141 197.86718,54.111328 195.96094,54.111328 C 194.07812,54.111328 192.625,53.634766 191.60156,52.681641 C 190.58594,51.720705 190.07812,50.357425 190.07813,48.591797 L 190.07813,48.521484" + id="text5139" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 254.46094,21.451172 C 255.10155,21.365237 255.58984,21.134768 255.92578,20.759766 C 256.26171,20.384769 256.42968,19.884769 256.42969,19.259766 C 256.42968,18.705083 256.26952,18.248052 255.94922,17.888672 C 255.63671,17.52149 255.14062,17.236335 254.46094,17.033203 L 254.46094,21.451172 M 253.06641,13.435547 L 253.06641,9.4511719 C 252.45703,9.529311 251.99218,9.7402483 251.67188,10.083984 C 251.35156,10.419935 251.1914,10.87306 251.19141,11.443359 C 251.1914,11.919934 251.33984,12.318371 251.63672,12.638672 C 251.9414,12.958995 252.41796,13.22462 253.06641,13.435547 M 253.06641,26.267578 L 253.06641,24.017578 C 251.30078,23.908203 249.98047,23.396485 249.10547,22.482422 C 248.23047,21.568361 247.79297,20.24805 247.79297,18.521484 L 250.93359,18.521484 C 250.97265,19.365239 251.16796,20.033207 251.51953,20.525391 C 251.8789,21.009768 252.39453,21.318362 253.06641,21.451172 L 253.06641,16.599609 C 251.2539,16.138679 249.96484,15.537117 249.19922,14.794922 C 248.43359,14.052744 248.05078,13.03712 248.05078,11.748047 C 248.05078,10.318373 248.5039,9.1660301 249.41016,8.2910156 C 250.32422,7.4160318 251.54296,6.959001 253.06641,6.9199219 L 253.06641,5.4199219 L 254.46094,5.4199219 L 254.46094,6.9199219 C 255.98437,6.9980635 257.17186,7.4590005 258.02344,8.3027344 C 258.87499,9.1386864 259.34374,10.318373 259.42969,11.841797 L 256.24219,11.841797 C 256.18749,11.115247 256.01171,10.56056 255.71484,10.177734 C 255.42577,9.7871232 255.0078,9.5683734 254.46094,9.5214844 L 254.46094,13.787109 C 256.39062,14.388681 257.74999,15.07618 258.53906,15.849609 C 259.32811,16.623054 259.72264,17.642584 259.72266,18.908203 C 259.72264,20.400394 259.26171,21.591799 258.33984,22.482422 C 257.42577,23.373047 256.1328,23.892578 254.46094,24.041016 L 254.46094,26.267578 L 253.06641,26.267578 M 254.64844,47.419922 L 254.64844,40.236328 L 250.08984,47.419922 L 254.64844,47.419922 M 254.57813,53.630859 L 254.57813,50.009766 L 247.5,50.009766 L 247.5,47.056641 L 253.6875,37.330078 L 257.84766,37.330078 L 257.84766,47.337891 L 259.79297,47.337891 L 259.79297,50.009766 L 257.84766,50.009766 L 257.84766,53.630859 L 254.57813,53.630859" + id="text5145" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 320.42578,19.740234 C 320.42577,20.263675 320.60155,20.705081 320.95313,21.064453 C 321.30467,21.416018 321.73827,21.591799 322.25391,21.591797 C 322.75389,21.591799 323.18358,21.412112 323.54297,21.052734 C 323.90233,20.68555 324.08201,20.24805 324.08203,19.740234 C 324.08201,19.240239 323.90233,18.814458 323.54297,18.462891 C 323.19139,18.103521 322.7617,17.923834 322.25391,17.923828 C 321.73827,17.923834 321.30467,18.099615 320.95313,18.451172 C 320.60155,18.794927 320.42577,19.224614 320.42578,19.740234 M 317.88281,19.740234 C 317.8828,18.521489 318.30468,17.494147 319.14844,16.658203 C 319.99217,15.822273 321.02733,15.404305 322.25391,15.404297 C 323.45701,15.404305 324.48045,15.830086 325.32422,16.681641 C 326.17576,17.525397 326.60154,18.544927 326.60156,19.740234 C 326.60154,20.943362 326.17576,21.974611 325.32422,22.833984 C 324.47264,23.685547 323.4492,24.111328 322.25391,24.111328 C 321.02733,24.111328 319.99217,23.689453 319.14844,22.845703 C 318.30468,22.001955 317.8828,20.9668 317.88281,19.740234 M 311.07422,24.111328 L 321.08203,6.8496094 L 322.96875,6.8496094 L 312.96094,24.111328 L 311.07422,24.111328 M 310.04297,11.220703 C 310.04297,11.73634 310.21484,12.169933 310.55859,12.521484 C 310.91015,12.873058 311.34375,13.048839 311.85938,13.048828 C 312.36718,13.048839 312.79687,12.873058 313.14844,12.521484 C 313.50781,12.162121 313.68749,11.728528 313.6875,11.220703 C 313.68749,10.720716 313.50781,10.294935 313.14844,9.9433594 C 312.79687,9.5839984 312.36718,9.4043111 311.85938,9.4042969 C 311.34375,9.4043111 310.91015,9.5800922 310.55859,9.9316406 C 310.21484,10.275404 310.04297,10.705091 310.04297,11.220703 M 307.5,11.220703 C 307.5,10.001967 307.92187,8.9707178 308.76563,8.1269531 C 309.60937,7.275407 310.64062,6.8496262 311.85938,6.8496094 C 313.06249,6.8496262 314.08593,7.2793132 314.92969,8.1386719 C 315.78124,8.990249 316.20702,10.017592 316.20703,11.220703 C 316.20702,12.423839 315.78124,13.451182 314.92969,14.302734 C 314.08593,15.146493 313.06249,15.568367 311.85938,15.568359 C 310.63281,15.568367 309.59765,15.150399 308.75391,14.314453 C 307.91797,13.478526 307.5,12.447277 307.5,11.220703 M 310.85156,49.119141 L 314.13281,49.119141 C 314.1875,49.853519 314.43359,50.423831 314.87109,50.830078 C 315.30859,51.228518 315.89453,51.427737 316.62891,51.427734 C 317.53515,51.427737 318.22655,51.162112 318.70313,50.630859 C 319.18749,50.099613 319.42968,49.337895 319.42969,48.345703 C 319.42968,47.416022 319.18358,46.685554 318.69141,46.154297 C 318.19921,45.615242 317.51952,45.345711 316.65234,45.345703 C 316.16796,45.345711 315.74218,45.443368 315.375,45.638672 C 315.00781,45.833992 314.69531,46.123054 314.4375,46.505859 L 311.41406,46.330078 L 312.50391,37.330078 L 322.14844,37.330078 L 322.14844,40.166016 L 314.87109,40.166016 L 314.4375,43.529297 C 314.80468,43.240245 315.22656,43.025401 315.70313,42.884766 C 316.17968,42.736339 316.71093,42.66212 317.29688,42.662109 C 318.96874,42.66212 320.3164,43.169932 321.33984,44.185547 C 322.37108,45.20118 322.88671,46.53321 322.88672,48.181641 C 322.88671,49.986332 322.3203,51.427737 321.1875,52.505859 C 320.05468,53.576172 318.53515,54.111328 316.62891,54.111328 C 314.89453,54.111328 313.51172,53.669922 312.48047,52.787109 C 311.45703,51.896486 310.91406,50.673831 310.85156,49.119141" + id="text5151" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 372.15234,48.298828 C 372.15234,49.25977 372.39062,50.021488 372.86719,50.583984 C 373.35156,51.146487 374.00781,51.427737 374.83594,51.427734 C 375.60937,51.427737 376.21484,51.154299 376.65234,50.607422 C 377.08983,50.06055 377.30858,49.298832 377.30859,48.322266 C 377.30858,47.423834 377.08202,46.724616 376.62891,46.224609 C 376.17577,45.724617 375.53905,45.474618 374.71875,45.474609 C 373.91406,45.474618 373.28515,45.724617 372.83203,46.224609 C 372.3789,46.724616 372.15234,47.416022 372.15234,48.298828 M 372.10547,43.916016 C 372.48828,43.525401 372.94921,43.232432 373.48828,43.037109 C 374.02734,42.833995 374.6289,42.732433 375.29297,42.732422 C 376.93358,42.732433 378.24608,43.232432 379.23047,44.232422 C 380.22264,45.23243 380.71874,46.56446 380.71875,48.228516 C 380.71874,49.994144 380.17968,51.419924 379.10156,52.505859 C 378.02343,53.591797 376.60155,54.134765 374.83594,54.134766 C 372.79687,54.134765 371.24609,53.431641 370.18359,52.025391 C 369.1289,50.619144 368.60156,48.560552 368.60156,45.849609 C 368.60156,42.935558 369.16797,40.708997 370.30078,39.169922 C 371.43359,37.623063 373.0664,36.849626 375.19922,36.849609 C 376.68358,36.849626 377.8789,37.236345 378.78516,38.009766 C 379.69921,38.783218 380.19921,39.830092 380.28516,41.150391 L 376.88672,41.150391 C 376.80858,40.611341 376.59765,40.205092 376.25391,39.931641 C 375.91015,39.658217 375.42968,39.521498 374.8125,39.521484 C 373.96874,39.521498 373.32031,39.888686 372.86719,40.623047 C 372.41406,41.349622 372.16015,42.447277 372.10547,43.916016" + id="text5157" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 432.85547,16.095703 L 431.96484,16.740234 C 431.60546,16.990241 431.33593,17.291022 431.15625,17.642578 C 430.97656,17.994146 430.88671,18.388677 430.88672,18.826172 C 430.88671,19.490239 431.11328,20.048832 431.56641,20.501953 C 432.01953,20.955081 432.58593,21.181643 433.26563,21.181641 C 433.76562,21.181643 434.24218,21.080081 434.69531,20.876953 C 435.15624,20.666019 435.58202,20.361331 435.97266,19.962891 L 432.85547,16.095703 M 433.79297,12.404297 L 434.20313,12.111328 C 434.57812,11.853527 434.85546,11.564465 435.03516,11.244141 C 435.21483,10.923841 435.30468,10.556654 435.30469,10.142578 C 435.30468,9.7441545 435.17968,9.4277486 434.92969,9.1933594 C 434.68749,8.958999 434.35546,8.8418117 433.93359,8.8417969 C 433.5039,8.8418117 433.16406,8.9629053 432.91406,9.2050781 C 432.66406,9.4394673 432.53906,9.7597795 432.53906,10.166016 C 432.53906,10.384779 432.59765,10.62306 432.71484,10.880859 C 432.83984,11.138684 433.01562,11.412122 433.24219,11.701172 L 433.79297,12.404297 M 431.15625,13.962891 L 430.47656,13.072266 C 430.125,12.603527 429.87109,12.166027 429.71484,11.759766 C 429.5664,11.345715 429.49218,10.912122 429.49219,10.458984 C 429.49218,9.2089988 429.89062,8.2168123 430.6875,7.4824219 C 431.49218,6.7402513 432.58203,6.3691579 433.95703,6.3691406 C 435.27733,6.3691579 436.3203,6.7090013 437.08594,7.3886719 C 437.85155,8.0683749 438.23436,8.9863428 438.23438,10.142578 C 438.23436,11.017591 438.0078,11.802746 437.55469,12.498047 C 437.10936,13.185557 436.40624,13.833994 435.44531,14.443359 L 437.91797,17.490234 C 438.15233,17.107428 438.33593,16.677741 438.46875,16.201172 C 438.60936,15.724617 438.70702,15.193368 438.76172,14.607422 L 441.80859,14.607422 C 441.72264,15.623055 441.5117,16.56446 441.17578,17.431641 C 440.83983,18.298833 440.37889,19.091801 439.79297,19.810547 L 442.93359,23.630859 L 438.94922,23.630859 L 437.77734,22.189453 C 437.08983,22.822266 436.33202,23.302735 435.50391,23.630859 C 434.68359,23.951172 433.82421,24.111328 432.92578,24.111328 C 431.33203,24.111328 430.02734,23.638672 429.01172,22.693359 C 428.0039,21.748049 427.5,20.541019 427.5,19.072266 C 427.5,17.978521 427.78125,17.037116 428.34375,16.248047 C 428.90625,15.458993 429.84375,14.697275 431.15625,13.962891 M 434.66016,53.630859 L 431.15625,53.630859 C 431.28125,51.341799 431.83203,49.07227 432.80859,46.822266 C 433.79296,44.572275 435.19531,42.361339 437.01563,40.189453 L 428.76563,40.189453 L 428.76563,37.330078 L 440.66016,37.330078 L 440.66016,39.849609 C 438.8164,41.880871 437.39843,44.029306 436.40625,46.294922 C 435.42187,48.560552 434.83984,51.005862 434.66016,53.630859" + id="text5163" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 493.5,13.212891 L 491.4375,16.119141 L 489.44531,14.724609 L 491.69531,11.900391 L 488.41406,10.986328 L 489.17578,8.6074219 L 492.32813,9.7324219 L 492.32813,6.3691406 L 494.64844,6.3691406 L 494.64844,9.7324219 L 497.80078,8.6308594 L 498.58594,11.009766 L 495.30469,11.900391 L 497.53125,14.701172 L 495.49219,16.166016 L 493.5,13.212891 M 490.875,48.755859 C 490.875,49.576176 491.10156,50.208988 491.55469,50.654297 C 492.01562,51.099612 492.67187,51.322268 493.52344,51.322266 C 494.33593,51.322268 494.97265,51.095706 495.43359,50.642578 C 495.90233,50.189457 496.13671,49.560551 496.13672,48.755859 C 496.13671,47.982428 495.89843,47.361334 495.42188,46.892578 C 494.9453,46.423835 494.31249,46.189461 493.52344,46.189453 C 492.73437,46.189461 492.09374,46.427742 491.60156,46.904297 C 491.11718,47.380866 490.875,47.998053 490.875,48.755859 M 491.14453,41.560547 C 491.14453,42.208996 491.34765,42.708995 491.75391,43.060547 C 492.16015,43.404307 492.74218,43.576182 493.5,43.576172 C 494.2578,43.576182 494.83984,43.400401 495.24609,43.048828 C 495.66015,42.697277 495.86718,42.201183 495.86719,41.560547 C 495.86718,40.93556 495.65624,40.443373 495.23438,40.083984 C 494.81249,39.724623 494.23437,39.544936 493.5,39.544922 C 492.78124,39.544936 492.20703,39.72853 491.77734,40.095703 C 491.35546,40.462904 491.14453,40.951185 491.14453,41.560547 M 489.9375,44.818359 C 489.23437,44.427744 488.72656,43.970713 488.41406,43.447266 C 488.10156,42.923839 487.94531,42.255871 487.94531,41.443359 C 487.94531,40.005873 488.4375,38.876968 489.42188,38.056641 C 490.40625,37.236345 491.76562,36.826189 493.5,36.826172 C 495.24999,36.826189 496.61718,37.236345 497.60156,38.056641 C 498.59374,38.869155 499.08983,39.998061 499.08984,41.443359 C 499.08983,42.216808 498.92186,42.888683 498.58594,43.458984 C 498.24999,44.021494 497.74608,44.474619 497.07422,44.818359 C 497.89452,45.20118 498.51171,45.73243 498.92578,46.412109 C 499.33983,47.083991 499.54686,47.904303 499.54688,48.873047 C 499.54686,50.505862 499.0078,51.787111 497.92969,52.716797 C 496.85936,53.646484 495.3828,54.111328 493.5,54.111328 C 491.59375,54.111328 490.11328,53.650391 489.05859,52.728516 C 488.0039,51.806642 487.47656,50.521487 487.47656,48.873047 C 487.47656,47.912115 487.67187,47.107428 488.0625,46.458984 C 488.46094,45.802742 489.08594,45.255868 489.9375,44.818359" + id="text5169" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 557.85938,6.3691406 C 556.78124,8.1347811 555.98046,9.9316543 555.45703,11.759766 C 554.93359,13.587901 554.67187,15.505868 554.67188,17.513672 C 554.67187,19.513676 554.93359,21.427737 555.45703,23.255859 C 555.98046,25.083983 556.78124,26.880856 557.85938,28.646484 L 555.38672,28.646484 C 554.01953,26.779294 552.98046,24.904296 552.26953,23.021484 C 551.5664,21.130862 551.21484,19.294926 551.21484,17.513672 C 551.21484,15.73243 551.5664,13.896494 552.26953,12.005859 C 552.98046,10.115248 554.01953,8.2363435 555.38672,6.3691406 L 557.85938,6.3691406 M 556.06641,42.685547 C 556.0664,41.724621 555.82421,40.96681 555.33984,40.412109 C 554.86327,39.849623 554.21093,39.568373 553.38281,39.568359 C 552.60156,39.568373 551.99218,39.837904 551.55469,40.376953 C 551.125,40.916028 550.91015,41.669934 550.91016,42.638672 C 550.91015,43.544932 551.13671,44.251963 551.58984,44.759766 C 552.04296,45.267586 552.67968,45.521492 553.5,45.521484 C 554.30468,45.521492 554.93359,45.271493 555.38672,44.771484 C 555.83983,44.271494 556.0664,43.576182 556.06641,42.685547 M 556.125,47.056641 C 555.73437,47.447272 555.27343,47.74024 554.74219,47.935547 C 554.21093,48.130865 553.61327,48.228521 552.94922,48.228516 C 551.30078,48.228521 549.98047,47.732428 548.98828,46.740234 C 547.99609,45.748055 547.5,44.419931 547.5,42.755859 C 547.5,40.990247 548.03906,39.564467 549.11719,38.478516 C 550.19531,37.392594 551.61718,36.849626 553.38281,36.849609 C 555.42968,36.849626 556.98436,37.556657 558.04688,38.970703 C 559.11718,40.376966 559.65233,42.431652 559.65234,45.134766 C 559.65233,48.041021 559.08202,50.267581 557.94141,51.814453 C 556.80077,53.361328 555.16015,54.134765 553.01953,54.134766 C 551.54296,54.134765 550.35156,53.751953 549.44531,52.986328 C 548.53906,52.212892 548.04297,51.162112 547.95703,49.833984 L 551.34375,49.845703 C 551.42187,50.384769 551.63281,50.787112 551.97656,51.052734 C 552.32031,51.318362 552.80468,51.451174 553.42969,51.451172 C 554.27343,51.451174 554.91796,51.083987 555.36328,50.349609 C 555.80858,49.615238 556.06249,48.517583 556.125,47.056641" + id="text5175" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 609.375,6.3691406 L 611.87109,6.3691406 C 613.23046,8.228531 614.26171,10.103529 614.96484,11.994141 C 615.66796,13.876963 616.01952,15.716805 616.01953,17.513672 C 616.01952,19.302739 615.66796,21.142581 614.96484,23.033203 C 614.26171,24.923827 613.23046,26.794919 611.87109,28.646484 L 609.375,28.646484 C 610.46094,26.873044 611.26562,25.072264 611.78906,23.244141 C 612.32031,21.408205 612.58593,19.498051 612.58594,17.513672 C 612.58593,15.521492 612.32031,13.611338 611.78906,11.783203 C 611.26562,9.9550918 610.46094,8.1504061 609.375,6.3691406 M 610.98047,45.474609 C 610.98046,47.513678 611.18359,48.994145 611.58984,49.916016 C 612.0039,50.837893 612.66015,51.29883 613.55859,51.298828 C 614.45702,51.29883 615.11327,50.833987 615.52734,49.904297 C 615.9414,48.974614 616.14843,47.498053 616.14844,45.474609 C 616.14843,43.44337 615.9414,41.966809 615.52734,41.044922 C 615.11327,40.12306 614.45702,39.662123 613.55859,39.662109 C 612.66015,39.662123 612.0039,40.12306 611.58984,41.044922 C 611.18359,41.958996 610.98046,43.435557 610.98047,45.474609 M 607.5,45.474609 C 607.5,42.591808 608,40.43556 609,39.005859 C 610.00781,37.568375 611.52734,36.849626 613.55859,36.849609 C 615.58202,36.849626 617.09765,37.572282 618.10547,39.017578 C 619.12108,40.455091 619.62889,42.615245 619.62891,45.498047 C 619.62889,48.380865 619.12499,50.533206 618.11719,51.955078 C 617.11718,53.376953 615.59765,54.08789 613.55859,54.087891 C 611.52734,54.08789 610.00781,53.373047 609,51.943359 C 608,50.513675 607.5,48.357427 607.5,45.474609" + id="text5181" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 667.5,26.900391 L 679.5,26.900391 L 679.5,29.291016 L 667.5,29.291016 L 667.5,26.900391 M 670.20703,48.849609 L 670.20703,45.638672 L 676.79297,45.638672 L 676.79297,48.849609 L 670.20703,48.849609" + id="text5187" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 733.33594,9.3222656 L 735.70313,9.3222656 L 735.70313,15.298828 L 741.53906,15.298828 L 741.53906,17.630859 L 735.70313,17.630859 L 735.70313,23.630859 L 733.33594,23.630859 L 733.33594,17.630859 L 727.5,17.630859 L 727.5,15.298828 L 733.33594,15.298828 L 733.33594,9.3222656 M 727.5,47.818359 L 741.53906,47.818359 L 741.53906,50.150391 L 727.5,50.150391 L 727.5,47.818359 M 727.5,42.779297 L 741.53906,42.779297 L 741.53906,45.111328 L 727.5,45.111328 L 727.5,42.779297" + id="text5201" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 11.070313,95.601563 L 11.070313,86.148438 L 7.65625,86.148438 L 7.65625,84.09375 L 16.828125,84.09375 L 16.828125,86.148438 L 13.4375,86.148438 L 13.4375,95.601563 L 11.070313,95.601563 M 22.859375,94.546875 C 22.572911,94.989584 22.197911,95.328125 21.734375,95.5625 C 21.270829,95.791666 20.731767,95.90625 20.117188,95.90625 C 19.294269,95.90625 18.658853,95.671875 18.210938,95.203125 C 17.768228,94.734376 17.546874,94.06771 17.546875,93.203125 C 17.546874,92.401045 17.768228,91.789066 18.210938,91.367188 C 18.658853,90.945317 19.395831,90.656255 20.421875,90.5 C 20.656246,90.463547 20.963538,90.42188 21.34375,90.375 C 22.307286,90.250005 22.789057,89.97136 22.789063,89.539063 C 22.789057,89.195319 22.682286,88.950527 22.46875,88.804688 C 22.255203,88.653653 21.898433,88.578132 21.398438,88.578125 C 20.9401,88.578132 20.588538,88.669278 20.34375,88.851563 C 20.098955,89.033861 19.97656,89.294277 19.976563,89.632813 L 19.976563,89.757813 L 17.851563,89.757813 L 17.851563,89.601563 C 17.851562,88.731778 18.158853,88.049487 18.773438,87.554688 C 19.388018,87.054696 20.236976,86.804696 21.320313,86.804688 C 22.507807,86.804696 23.41666,87.010425 24.046875,87.421875 C 24.682284,87.833341 24.999992,88.427091 25,89.203125 L 25,94.03125 C 24.999992,94.385418 25.03645,94.651043 25.109375,94.828125 C 25.182283,95.000001 25.304679,95.130209 25.476563,95.21875 L 25.476563,95.601563 L 23.109375,95.601563 C 23.031244,95.455729 22.971348,95.294271 22.929688,95.117188 C 22.888015,94.940105 22.864577,94.750001 22.859375,94.546875 M 22.820313,91.421875 C 22.450515,91.593754 22.023432,91.731775 21.539063,91.835938 C 21.059892,91.940108 20.812496,91.994795 20.796875,92 C 20.39583,92.114587 20.11458,92.257816 19.953125,92.429688 C 19.796872,92.601566 19.718747,92.838544 19.71875,93.140625 C 19.718747,93.453127 19.82031,93.703127 20.023438,93.890625 C 20.226559,94.072918 20.499997,94.164064 20.84375,94.164063 C 21.458329,94.164064 21.940099,93.992189 22.289063,93.648438 C 22.643224,93.299481 22.820307,92.825524 22.820313,92.226563 L 22.820313,91.421875 M 27.039063,84.09375 L 29.25,84.09375 L 29.25,88.164063 C 29.531246,87.721362 29.882809,87.388029 30.304688,87.164063 C 30.731766,86.934905 31.216141,86.820321 31.757813,86.820313 C 32.783847,86.820321 33.622388,87.2448 34.273438,88.09375 C 34.92447,88.937507 35.249991,90.036464 35.25,91.390625 C 35.249991,92.734378 34.92447,93.820314 34.273438,94.648438 C 33.622388,95.476563 32.773431,95.890625 31.726563,95.890625 C 31.179682,95.890625 30.70312,95.776041 30.296875,95.546875 C 29.895829,95.317709 29.531246,94.953126 29.203125,94.453125 L 29.203125,95.601563 L 27.039063,95.601563 L 27.039063,84.09375 M 32.992188,91.296875 C 32.992181,90.51563 32.828118,89.903652 32.5,89.460938 C 32.171869,89.013027 31.721348,88.789069 31.148438,88.789063 C 30.544266,88.789069 30.075517,89.007819 29.742188,89.445313 C 29.414059,89.87761 29.249997,90.494797 29.25,91.296875 C 29.249997,92.161462 29.406247,92.817711 29.71875,93.265625 C 30.036454,93.713544 30.497391,93.937502 31.101563,93.9375 C 31.71614,93.937502 32.18489,93.713544 32.507813,93.265625 C 32.830722,92.812503 32.992181,92.156253 32.992188,91.296875" + id="text5427" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 789.76563,44.369141 L 792.57031,44.369141 C 793.23176,44.369143 793.71353,44.249351 794.01563,44.009766 C 794.3177,43.770185 794.46874,43.392581 794.46875,42.876953 C 794.46874,42.340499 794.3203,41.955083 794.02344,41.720703 C 793.72656,41.481125 793.23697,41.361333 792.55469,41.361328 L 789.76563,41.361328 L 789.76563,44.369141 M 789.76563,39.392578 L 792.46875,39.392578 C 793.05208,39.392585 793.47916,39.293627 793.75,39.095703 C 794.02083,38.892586 794.15624,38.574878 794.15625,38.142578 C 794.15624,37.720712 794.02343,37.416025 793.75781,37.228516 C 793.49739,37.035817 793.06249,36.939463 792.45313,36.939453 L 789.76563,36.939453 L 789.76563,39.392578 M 787.5,46.447266 L 787.5,34.939453 L 792.92188,34.939453 C 794.09895,34.939465 794.99478,35.189464 795.60938,35.689453 C 796.22916,36.184255 796.53905,36.905609 796.53906,37.853516 C 796.53905,38.436857 796.42447,38.923836 796.19531,39.314453 C 795.96614,39.705085 795.62239,40.007168 795.16406,40.220703 C 795.7578,40.460292 796.20051,40.806646 796.49219,41.259766 C 796.78905,41.707687 796.93749,42.267582 796.9375,42.939453 C 796.93749,44.059247 796.57291,44.92383 795.84375,45.533203 C 795.11457,46.142578 794.08072,46.447266 792.74219,46.447266 L 787.5,46.447266 M 803.45313,45.392578 C 803.16666,45.835287 802.79166,46.173828 802.32813,46.408203 C 801.86458,46.63737 801.32552,46.751953 800.71094,46.751953 C 799.88802,46.751953 799.2526,46.517578 798.80469,46.048828 C 798.36198,45.580079 798.14062,44.913413 798.14063,44.048828 C 798.14062,43.246748 798.36198,42.634769 798.80469,42.212891 C 799.2526,41.79102 799.98958,41.501958 801.01563,41.345703 C 801.25,41.30925 801.55729,41.267583 801.9375,41.220703 C 802.90104,41.095708 803.38281,40.817063 803.38281,40.384766 C 803.38281,40.041022 803.27604,39.796231 803.0625,39.650391 C 802.84895,39.499356 802.49218,39.423835 801.99219,39.423828 C 801.53385,39.423835 801.18229,39.514981 800.9375,39.697266 C 800.69271,39.879564 800.57031,40.13998 800.57031,40.478516 L 800.57031,40.603516 L 798.44531,40.603516 L 798.44531,40.447266 C 798.44531,39.577481 798.7526,38.89519 799.36719,38.400391 C 799.98177,37.900399 800.83073,37.650399 801.91406,37.650391 C 803.10156,37.650399 804.01041,37.856128 804.64063,38.267578 C 805.27603,38.679044 805.59374,39.272794 805.59375,40.048828 L 805.59375,44.876953 C 805.59374,45.231121 805.6302,45.496746 805.70313,45.673828 C 805.77603,45.845704 805.89843,45.975912 806.07031,46.064453 L 806.07031,46.447266 L 803.70313,46.447266 C 803.62499,46.301432 803.5651,46.139974 803.52344,45.962891 C 803.48176,45.785808 803.45833,45.595704 803.45313,45.392578 M 803.41406,42.267578 C 803.04427,42.439457 802.61718,42.577478 802.13281,42.681641 C 801.65364,42.785811 801.40625,42.840498 801.39063,42.845703 C 800.98958,42.96029 800.70833,43.103519 800.54688,43.275391 C 800.39062,43.447269 800.3125,43.684248 800.3125,43.986328 C 800.3125,44.29883 800.41406,44.54883 800.61719,44.736328 C 800.82031,44.918621 801.09375,45.009767 801.4375,45.009766 C 802.05208,45.009767 802.53385,44.837892 802.88281,44.494141 C 803.23697,44.145185 803.41406,43.671227 803.41406,43.072266 L 803.41406,42.267578 M 812.71875,43.244141 L 814.96094,43.244141 C 814.86718,44.322268 814.47395,45.173829 813.78125,45.798828 C 813.08854,46.423828 812.19791,46.736328 811.10938,46.736328 C 809.875,46.736328 808.90625,46.335287 808.20313,45.533203 C 807.50521,44.725913 807.15625,43.611331 807.15625,42.189453 C 807.15625,40.772792 807.51302,39.663418 808.22656,38.861328 C 808.94531,38.054045 809.93229,37.650399 811.1875,37.650391 C 812.28645,37.650399 813.16666,37.942066 813.82813,38.525391 C 814.49478,39.108731 814.86718,39.92123 814.94531,40.962891 L 812.6875,40.962891 C 812.62499,40.509772 812.46614,40.163418 812.21094,39.923828 C 811.95572,39.684252 811.61979,39.56446 811.20313,39.564453 C 810.64062,39.56446 810.21875,39.785814 809.9375,40.228516 C 809.66146,40.67123 809.52343,41.335292 809.52344,42.220703 C 809.52343,43.038415 809.66666,43.668623 809.95313,44.111328 C 810.24479,44.54883 810.66145,44.76758 811.20313,44.767578 C 811.62499,44.76758 811.96354,44.639976 812.21875,44.384766 C 812.47395,44.12956 812.64062,43.749352 812.71875,43.244141 M 816.44531,46.447266 L 816.44531,34.939453 L 818.65625,34.939453 L 818.65625,40.978516 L 821.35938,37.955078 L 824.09375,37.955078 L 821.13281,41.103516 L 824.27344,46.447266 L 821.54688,46.447266 L 819.51563,42.830078 L 818.65625,43.759766 L 818.65625,46.447266 L 816.44531,46.447266 M 824.79688,43.681641 L 827.0625,43.681641 C 827.08333,44.113935 827.23958,44.436851 827.53125,44.650391 C 827.82291,44.858726 828.26041,44.962892 828.84375,44.962891 C 829.28645,44.962892 829.6276,44.889976 829.86719,44.744141 C 830.11197,44.593101 830.23437,44.382164 830.23438,44.111328 C 830.23437,43.725914 829.78124,43.436852 828.875,43.244141 C 828.5052,43.166019 828.21093,43.098311 827.99219,43.041016 C 826.88802,42.759769 826.11979,42.426436 825.6875,42.041016 C 825.26042,41.655604 825.04687,41.134771 825.04688,40.478516 C 825.04687,39.608731 825.35937,38.921231 825.98438,38.416016 C 826.61458,37.905608 827.46614,37.650399 828.53906,37.650391 C 829.67447,37.650399 830.5651,37.903003 831.21094,38.408203 C 831.86197,38.913419 832.20833,39.624356 832.25,40.541016 L 830.03906,40.541016 C 830.02343,40.181647 829.88541,39.903001 829.625,39.705078 C 829.36979,39.507168 829.01302,39.40821 828.55469,39.408203 C 828.12239,39.40821 827.79948,39.473314 827.58594,39.603516 C 827.3776,39.733731 827.27343,39.929043 827.27344,40.189453 C 827.27343,40.528001 827.83854,40.82748 828.96875,41.087891 C 829.22916,41.145188 829.43489,41.192063 829.58594,41.228516 C 830.71614,41.494146 831.48697,41.814458 831.89844,42.189453 C 832.3151,42.564457 832.52343,43.093102 832.52344,43.775391 C 832.52343,44.738934 832.18228,45.473308 831.5,45.978516 C 830.82291,46.483724 829.83593,46.736328 828.53906,46.736328 C 827.36718,46.736328 826.45052,46.473307 825.78906,45.947266 C 825.1276,45.421225 824.79687,44.697267 824.79688,43.775391 L 824.79688,43.681641 M 840.02344,42.251953 C 840.02343,41.397792 839.86197,40.74675 839.53906,40.298828 C 839.21614,39.84571 838.74739,39.619147 838.13281,39.619141 C 837.52864,39.619147 837.0677,39.843106 836.75,40.291016 C 836.4375,40.738938 836.28125,41.392583 836.28125,42.251953 C 836.28125,43.05404 836.44531,43.673831 836.77344,44.111328 C 837.10677,44.54883 837.57552,44.76758 838.17969,44.767578 C 838.7526,44.76758 839.20312,44.543622 839.53125,44.095703 C 839.85937,43.647789 840.02343,43.033207 840.02344,42.251953 M 834.07031,49.853516 L 834.07031,37.955078 L 836.23438,37.955078 L 836.23438,39.103516 C 836.5625,38.603523 836.92708,38.23894 837.32813,38.009766 C 837.73437,37.780608 838.21093,37.666024 838.75781,37.666016 C 839.80468,37.666024 840.65364,38.080086 841.30469,38.908203 C 841.95572,39.731127 842.28124,40.814459 842.28125,42.158203 C 842.28124,43.517581 841.95572,44.621747 841.30469,45.470703 C 840.65364,46.314453 839.8151,46.736328 838.78906,46.736328 C 838.24739,46.736328 837.76302,46.621745 837.33594,46.392578 C 836.91406,46.163412 836.5625,45.830079 836.28125,45.392578 L 836.28125,49.853516 L 834.07031,49.853516 M 848.70313,45.392578 C 848.41666,45.835287 848.04166,46.173828 847.57813,46.408203 C 847.11458,46.63737 846.57552,46.751953 845.96094,46.751953 C 845.13802,46.751953 844.5026,46.517578 844.05469,46.048828 C 843.61198,45.580079 843.39062,44.913413 843.39063,44.048828 C 843.39062,43.246748 843.61198,42.634769 844.05469,42.212891 C 844.5026,41.79102 845.23958,41.501958 846.26563,41.345703 C 846.5,41.30925 846.80729,41.267583 847.1875,41.220703 C 848.15104,41.095708 848.63281,40.817063 848.63281,40.384766 C 848.63281,40.041022 848.52604,39.796231 848.3125,39.650391 C 848.09895,39.499356 847.74218,39.423835 847.24219,39.423828 C 846.78385,39.423835 846.43229,39.514981 846.1875,39.697266 C 845.94271,39.879564 845.82031,40.13998 845.82031,40.478516 L 845.82031,40.603516 L 843.69531,40.603516 L 843.69531,40.447266 C 843.69531,39.577481 844.0026,38.89519 844.61719,38.400391 C 845.23177,37.900399 846.08073,37.650399 847.16406,37.650391 C 848.35156,37.650399 849.26041,37.856128 849.89063,38.267578 C 850.52603,38.679044 850.84374,39.272794 850.84375,40.048828 L 850.84375,44.876953 C 850.84374,45.231121 850.8802,45.496746 850.95313,45.673828 C 851.02603,45.845704 851.14843,45.975912 851.32031,46.064453 L 851.32031,46.447266 L 848.95313,46.447266 C 848.87499,46.301432 848.8151,46.139974 848.77344,45.962891 C 848.73176,45.785808 848.70833,45.595704 848.70313,45.392578 M 848.66406,42.267578 C 848.29427,42.439457 847.86718,42.577478 847.38281,42.681641 C 846.90364,42.785811 846.65625,42.840498 846.64063,42.845703 C 846.23958,42.96029 845.95833,43.103519 845.79688,43.275391 C 845.64062,43.447269 845.5625,43.684248 845.5625,43.986328 C 845.5625,44.29883 845.66406,44.54883 845.86719,44.736328 C 846.07031,44.918621 846.34375,45.009767 846.6875,45.009766 C 847.30208,45.009767 847.78385,44.837892 848.13281,44.494141 C 848.48697,44.145185 848.66406,43.671227 848.66406,43.072266 L 848.66406,42.267578 M 857.96875,43.244141 L 860.21094,43.244141 C 860.11718,44.322268 859.72395,45.173829 859.03125,45.798828 C 858.33854,46.423828 857.44791,46.736328 856.35938,46.736328 C 855.125,46.736328 854.15625,46.335287 853.45313,45.533203 C 852.75521,44.725913 852.40625,43.611331 852.40625,42.189453 C 852.40625,40.772792 852.76302,39.663418 853.47656,38.861328 C 854.19531,38.054045 855.18229,37.650399 856.4375,37.650391 C 857.53645,37.650399 858.41666,37.942066 859.07813,38.525391 C 859.74478,39.108731 860.11718,39.92123 860.19531,40.962891 L 857.9375,40.962891 C 857.87499,40.509772 857.71614,40.163418 857.46094,39.923828 C 857.20572,39.684252 856.86979,39.56446 856.45313,39.564453 C 855.89062,39.56446 855.46875,39.785814 855.1875,40.228516 C 854.91146,40.67123 854.77343,41.335292 854.77344,42.220703 C 854.77343,43.038415 854.91666,43.668623 855.20313,44.111328 C 855.49479,44.54883 855.91145,44.76758 856.45313,44.767578 C 856.87499,44.76758 857.21354,44.639976 857.46875,44.384766 C 857.72395,44.12956 857.89062,43.749352 857.96875,43.244141 M 866.88281,43.869141 L 869.14844,43.869141 C 868.91926,44.764976 868.45572,45.4681 867.75781,45.978516 C 867.0651,46.483724 866.21874,46.736328 865.21875,46.736328 C 863.98958,46.736328 863.01562,46.32487 862.29688,45.501953 C 861.57812,44.67383 861.21875,43.554039 861.21875,42.142578 C 861.21875,40.751959 861.57292,39.655606 862.28125,38.853516 C 862.98958,38.051441 863.95833,37.650399 865.1875,37.650391 C 866.48958,37.650399 867.49478,38.046232 868.20313,38.837891 C 868.91145,39.624356 869.26562,40.74675 869.26563,42.205078 C 869.26562,42.366541 869.26301,42.488936 869.25781,42.572266 C 869.2578,42.650394 869.2526,42.725915 869.24219,42.798828 L 863.57031,42.798828 C 863.60156,43.465498 863.76302,43.968101 864.05469,44.306641 C 864.35156,44.645184 864.77604,44.814455 865.32813,44.814453 C 865.71874,44.814455 866.03906,44.738934 866.28906,44.587891 C 866.53906,44.431643 866.73697,44.19206 866.88281,43.869141 M 863.57031,41.306641 L 866.91406,41.306641 C 866.89322,40.73373 866.73958,40.298834 866.45313,40.001953 C 866.17187,39.699877 865.76562,39.548835 865.23438,39.548828 C 864.73958,39.548835 864.34895,39.699877 864.0625,40.001953 C 863.78125,40.304043 863.61718,40.738938 863.57031,41.306641" + id="text5207" /> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1" + d="M 840,17.646484 L 797.02608,17.646484" + id="path5439" /> + <path + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="M 802.5,25.146484 L 802.5,10.146484 L 787.5,17.646484 L 802.5,25.146484 z " + id="path5441" /> + <g + id="g5459" + transform="translate(0,7.5)"> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" + d="M 82.50003,75 L 54.020182,75" + id="path5453" /> + <path + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z " + id="path5455" /> + <path + id="path5457" + d="M 45,67.5 C 45,82.5 45,82.5 45,82.5" + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> + </g> + <g + id="g5464" + transform="matrix(-1,9.581637e-17,-9.581637e-17,-1,127.5,172.5)"> + <path + id="path5466" + d="M 82.50003,75 L 54.020182,75" + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> + <path + id="path5468" + d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z " + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" /> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" + d="M 45,67.5 C 45,82.5 45,82.5 45,82.5" + id="path5470" /> + </g> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 107.0625,80.560547 L 105.23438,78.779297 L 107.17969,76.763672 L 109.05469,78.591797 C 109.30467,78.123052 109.49608,77.587897 109.62891,76.986328 C 109.7617,76.384773 109.82811,75.728524 109.82813,75.017578 C 109.82811,73.119151 109.40233,71.646496 108.55078,70.599609 C 107.69921,69.544936 106.5078,69.017593 104.97656,69.017578 C 103.46093,69.017593 102.28124,69.54103 101.4375,70.587891 C 100.59374,71.634778 100.17187,73.111339 100.17188,75.017578 C 100.17187,76.916022 100.59374,78.392583 101.4375,79.447266 C 102.28124,80.494144 103.46093,81.017581 104.97656,81.017578 C 105.36718,81.017581 105.73436,80.978518 106.07813,80.900391 C 106.42968,80.822268 106.7578,80.708987 107.0625,80.560547 M 109.55859,82.916016 C 108.97264,83.306641 108.28905,83.603516 107.50781,83.806641 C 106.73436,84.009765 105.89061,84.111328 104.97656,84.111328 C 102.39843,84.111328 100.34765,83.291016 98.824219,81.650391 C 97.308592,80.009769 96.55078,77.798834 96.550781,75.017578 C 96.55078,72.228527 97.308592,70.017592 98.824219,68.384766 C 100.34765,66.744158 102.39843,65.923846 104.97656,65.923828 C 107.55468,65.923846 109.60545,66.744158 111.12891,68.384766 C 112.66014,70.025404 113.42576,72.23634 113.42578,75.017578 C 113.42576,76.236336 113.26951,77.353522 112.95703,78.369141 C 112.64451,79.376957 112.18358,80.259769 111.57422,81.017578 L 113.44922,82.810547 L 111.52734,84.826172 L 109.55859,82.916016" + id="text5474" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 158.94141,83.630859 L 153.99609,66.369141 L 157.67578,66.369141 L 160.62891,78.544922 L 163.125,66.369141 L 166.91016,66.369141 L 169.40625,78.544922 L 172.35938,66.369141 L 176.00391,66.369141 L 171.07031,83.630859 L 167.68359,83.630859 L 165.01172,70.412109 L 162.32813,83.630859 L 158.94141,83.630859" + id="text5482" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 218.52539,83.630859 L 218.52539,66.369141 L 231.05273,66.369141 L 231.05273,69.369141 L 222.0293,69.369141 L 222.0293,73.048828 L 230.2793,73.048828 L 230.2793,76.001953 L 222.0293,76.001953 L 222.0293,80.443359 L 231.47461,80.443359 L 231.47461,83.630859 L 218.52539,83.630859" + id="text5492" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 281.4375,73.916016 L 285.60938,73.916016 C 286.51561,73.916025 287.17968,73.732432 287.60156,73.365234 C 288.03124,72.998058 288.24608,72.419933 288.24609,71.630859 C 288.24608,70.880872 288.03905,70.314466 287.625,69.931641 C 287.21093,69.54103 286.59374,69.345717 285.77344,69.345703 L 281.4375,69.345703 L 281.4375,73.916016 M 277.88672,83.630859 L 277.88672,66.369141 L 286.25391,66.369141 C 288.13671,66.369158 289.53124,66.771501 290.4375,67.576172 C 291.34373,68.380875 291.79686,69.611342 291.79688,71.267578 C 291.79686,72.322277 291.5742,73.201182 291.12891,73.904297 C 290.69139,74.607431 290.05858,75.087899 289.23047,75.345703 C 289.98045,75.611336 290.5117,76.017586 290.82422,76.564453 C 291.14452,77.111335 291.32811,77.962896 291.375,79.119141 L 291.44531,81.158203 C 291.4453,81.173831 291.4453,81.197268 291.44531,81.228516 C 291.46873,82.259767 291.69139,82.884766 292.11328,83.103516 L 292.11328,83.630859 L 288.22266,83.630859 C 288.09764,83.388672 287.99999,83.091797 287.92969,82.740234 C 287.86718,82.380861 287.82811,81.95508 287.8125,81.462891 L 287.76563,79.646484 C 287.72655,78.576177 287.52343,77.853521 287.15625,77.478516 C 286.79686,77.103522 286.14452,76.916022 285.19922,76.916016 L 281.4375,76.916016 L 281.4375,83.630859 L 277.88672,83.630859" + id="text5500" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 343.24219,83.630859 L 343.24219,69.451172 L 338.12109,69.451172 L 338.12109,66.369141 L 351.87891,66.369141 L 351.87891,69.451172 L 346.79297,69.451172 L 346.79297,83.630859 L 343.24219,83.630859" + id="text5504" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 407.06836,83.630859 L 403.51758,83.630859 L 403.51758,77.197266 L 397.24805,66.369141 L 401.5957,66.369141 L 405.28711,73.810547 L 408.69727,66.369141 L 412.75195,66.369141 L 407.06836,77.197266 L 407.06836,83.630859" + id="text5518" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 458.08594,66.105469 L 461.67188,66.105469 L 461.67188,76.933594 C 461.67187,78.269536 461.93749,79.246098 462.46875,79.863281 C 462.99999,80.472659 463.84374,80.777346 465,80.777344 C 466.17187,80.777346 467.02343,80.472659 467.55469,79.863281 C 468.09374,79.25391 468.36327,78.277349 468.36328,76.933594 L 468.36328,66.105469 L 471.91406,66.105469 L 471.91406,77.320313 C 471.91405,79.437504 471.3203,81.062502 470.13281,82.195313 C 468.95311,83.328125 467.24999,83.894531 465.02344,83.894531 C 462.78124,83.894531 461.0625,83.332031 459.86719,82.207031 C 458.67969,81.074221 458.08594,79.445316 458.08594,77.320313 L 458.08594,66.105469" + id="text5522" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 523.22461,83.630859 L 523.22461,66.369141 L 526.77539,66.369141 L 526.77539,83.630859 L 523.22461,83.630859" + id="text5526" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 580.18359,75 C 580.18359,76.898444 580.60546,78.375005 581.44922,79.429688 C 582.29296,80.476566 583.47265,81.000003 584.98828,81 C 586.51952,81.000003 587.71093,80.476566 588.5625,79.429688 C 589.41405,78.375005 589.83983,76.898444 589.83984,75 C 589.83983,73.101573 589.41405,71.628918 588.5625,70.582031 C 587.71093,69.527358 586.51952,69.000015 584.98828,69 C 583.47265,69.000015 582.29296,69.523452 581.44922,70.570313 C 580.60546,71.617199 580.18359,73.093761 580.18359,75 M 576.5625,75 C 576.5625,72.210949 577.32031,70.000014 578.83594,68.367188 C 580.35937,66.726579 582.41015,65.906268 584.98828,65.90625 C 587.56639,65.906268 589.61717,66.726579 591.14063,68.367188 C 592.67186,70.007826 593.43748,72.218761 593.4375,75 C 593.43748,77.781256 592.67186,79.992191 591.14063,81.632813 C 589.61717,83.273438 587.56639,84.09375 584.98828,84.09375 C 582.41015,84.09375 580.35937,83.273438 578.83594,81.632813 C 577.32031,79.992191 576.5625,77.781256 576.5625,75" + id="text5530" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 641.97656,74.361328 L 645.41016,74.361328 C 646.33983,74.361337 647.01561,74.166025 647.4375,73.775391 C 647.85936,73.376963 648.0703,72.740245 648.07031,71.865234 C 648.0703,71.044934 647.86327,70.423841 647.44922,70.001953 C 647.03515,69.580092 646.41796,69.369155 645.59766,69.369141 L 641.97656,69.369141 L 641.97656,74.361328 M 641.95313,77.490234 L 641.95313,83.630859 L 638.40234,83.630859 L 638.40234,66.369141 L 646.07813,66.369141 C 647.89061,66.369158 649.26171,66.841814 650.19141,67.787109 C 651.12889,68.724624 651.59764,70.103529 651.59766,71.923828 C 651.59764,73.705088 651.14061,75.080087 650.22656,76.048828 C 649.31249,77.009772 648.0078,77.490241 646.3125,77.490234 L 641.95313,77.490234" + id="text5534" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 709.24805,63.919922 L 709.24805,66.369141 C 709.17772,66.369155 709.08007,66.365249 708.95508,66.357422 C 708.83007,66.349624 708.74413,66.345718 708.69727,66.345703 C 707.90819,66.345718 707.37304,66.498062 707.0918,66.802734 C 706.81835,67.099624 706.68163,67.732435 706.68164,68.701172 L 706.68164,71.513672 C 706.68163,72.66993 706.50585,73.490242 706.1543,73.974609 C 705.80273,74.458991 705.16992,74.806647 704.25586,75.017578 C 705.16992,75.228522 705.80273,75.572271 706.1543,76.048828 C 706.50585,76.525395 706.68163,77.341801 706.68164,78.498047 L 706.68164,81.322266 C 706.68163,82.283202 706.81835,82.912108 707.0918,83.208984 C 707.36523,83.505857 707.90038,83.654294 708.69727,83.654297 C 708.74413,83.654294 708.83007,83.650388 708.95508,83.642578 C 709.08007,83.634763 709.17772,83.630857 709.24805,83.630859 L 709.24805,86.080078 C 709.13866,86.080073 708.98632,86.08398 708.79102,86.091797 C 708.59569,86.099605 708.45116,86.103511 708.35742,86.103516 C 707.57616,86.103511 706.92382,86.056636 706.40039,85.962891 C 705.87695,85.869136 705.43163,85.724605 705.06445,85.529297 C 704.61913,85.263668 704.30273,84.904293 704.11523,84.451172 C 703.93554,84.005857 703.8457,83.228514 703.8457,82.119141 L 703.8457,79.166016 C 703.8457,78.095706 703.64648,77.337895 703.24805,76.892578 C 702.84961,76.439458 702.17773,76.212896 701.23242,76.212891 C 701.18554,76.212896 701.10742,76.216802 700.99805,76.224609 C 700.88867,76.232427 700.80664,76.236333 700.75195,76.236328 L 700.75195,73.787109 C 700.80664,73.787117 700.88867,73.791023 700.99805,73.798828 C 701.10742,73.806648 701.18554,73.810554 701.23242,73.810547 C 702.16992,73.810554 702.83789,73.583992 703.23633,73.130859 C 703.64257,72.677743 703.8457,71.912119 703.8457,70.833984 L 703.8457,67.904297 C 703.8457,66.787124 703.93554,66.001968 704.11523,65.548828 C 704.30273,65.095719 704.61913,64.736345 705.06445,64.470703 C 705.43163,64.275408 705.87695,64.130876 706.40039,64.037109 C 706.92382,63.943377 707.57616,63.896502 708.35742,63.896484 C 708.45116,63.896502 708.59569,63.900408 708.79102,63.908203 C 708.98632,63.916033 709.13866,63.919939 709.24805,63.919922 M 703.0957,93.966797 L 709.01367,93.966797 L 709.01367,96.462891 L 706.25977,96.462891 L 706.25977,113.8418 L 709.01367,113.8418 L 709.01367,116.33789 L 703.0957,116.33789 L 703.0957,93.966797" + id="text5546" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 760.75195,63.908203 L 761.54883,63.908203 C 762.4082,63.90822 763.09961,63.955095 763.62305,64.048828 C 764.14648,64.142595 764.58398,64.291033 764.93555,64.494141 C 765.38085,64.744157 765.69335,65.103532 765.87305,65.572266 C 766.06054,66.033218 766.15429,66.806655 766.1543,67.892578 L 766.1543,70.845703 C 766.15429,71.916025 766.35351,72.677743 766.75195,73.130859 C 767.15038,73.57618 767.82226,73.798836 768.76758,73.798828 C 768.81444,73.798836 768.89257,73.794929 769.00195,73.787109 C 769.11132,73.779304 769.19335,73.775398 769.24805,73.775391 L 769.24805,76.224609 L 768.81445,76.224609 C 767.83788,76.224614 767.15038,76.443364 766.75195,76.880859 C 766.35351,77.318363 766.15429,78.076175 766.1543,79.154297 L 766.1543,82.107422 C 766.15429,83.224607 766.06054,84.009763 765.87305,84.462891 C 765.69335,84.916012 765.38085,85.267574 764.93555,85.517578 C 764.56835,85.712886 764.12304,85.857417 763.59961,85.951172 C 763.07617,86.044917 762.42382,86.091792 761.64258,86.091797 C 761.54883,86.091792 761.40429,86.087886 761.20898,86.080078 C 761.01367,86.072261 760.86133,86.068355 760.75195,86.068359 L 760.75195,83.619141 C 760.82226,83.619138 760.91992,83.623044 761.04492,83.630859 C 761.16992,83.638669 761.25586,83.642576 761.30273,83.642578 C 762.09179,83.642576 762.62304,83.490232 762.89648,83.185547 C 763.17773,82.88867 763.31836,82.263671 763.31836,81.310547 L 763.31836,78.509766 C 763.31836,77.337895 763.49414,76.513677 763.8457,76.037109 C 764.19726,75.55274 764.83007,75.20899 765.74414,75.005859 C 764.83007,74.794928 764.19726,74.447272 763.8457,73.962891 C 763.49414,73.478523 763.31836,72.658212 763.31836,71.501953 L 763.31836,68.666016 C 763.31836,67.712904 763.17773,67.087905 762.89648,66.791016 C 762.62304,66.486343 762.09179,66.333999 761.30273,66.333984 C 761.25586,66.333999 761.16992,66.337906 761.04492,66.345703 C 760.91992,66.35353 760.82226,66.357437 760.75195,66.357422 L 760.75195,63.908203 M 767.00977,93.955078 L 767.00977,116.32617 L 761.08008,116.32617 L 761.08008,113.83008 L 763.8457,113.83008 L 763.8457,96.451172 L 761.08008,96.451172 L 761.08008,93.955078 L 767.00977,93.955078" + id="text5554" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 823.79883,62.977287 L 826.21289,62.977287 L 826.21289,86.977287 L 823.79883,86.977287 L 823.79883,62.977287 M 827.10352,113.54369 L 821.29102,93.6101 L 822.87305,93.6101 L 828.70898,113.54369 L 827.10352,113.54369" + id="text5564" /> + <g + id="g3597"> + <path + id="text5570" + d="M 22.996094,139.10156 C 22.907541,140.40886 22.403635,141.44792 21.484375,142.21875 C 20.565095,142.98958 19.365878,143.375 17.886719,143.375 C 16.183589,143.375 14.859372,142.84375 13.914063,141.78125 C 12.968749,140.71875 12.496093,139.22917 12.496094,137.3125 C 12.496093,135.35417 12.977863,133.85418 13.941406,132.8125 C 14.904945,131.77084 16.29036,131.25001 18.097656,131.25 C 19.566398,131.25001 20.726554,131.60808 21.578125,132.32422 C 22.429677,133.04037 22.897124,134.05209 22.980469,135.35938 L 20.644531,135.35938 C 20.545564,134.70834 20.279939,134.21225 19.847656,133.87109 C 19.415357,133.52996 18.832024,133.35938 18.097656,133.35938 C 17.055984,133.35938 16.264318,133.69532 15.722656,134.36719 C 15.180986,135.03907 14.910153,136.02084 14.910156,137.3125 C 14.910153,138.5625 15.179684,139.52865 15.71875,140.21094 C 16.257808,140.89323 17.024734,141.23438 18.019531,141.23438 C 18.738274,141.23438 19.326815,141.05078 19.785156,140.68359 C 20.243481,140.31641 20.540356,139.78907 20.675781,139.10156 L 22.996094,139.10156 z M 29.558594,142 C 29.27213,142.44271 28.89713,142.77995 28.433594,143.01172 C 27.970048,143.24349 27.430986,143.35937 26.816406,143.35938 C 25.993487,143.35937 25.359373,143.125 24.914063,142.65625 C 24.468749,142.1875 24.246093,141.52083 24.246094,140.65625 C 24.246093,139.85417 24.468749,139.24219 24.914063,138.82031 C 25.359373,138.39844 26.09505,138.10938 27.121094,137.95313 C 27.355465,137.91667 27.662756,137.87501 28.042969,137.82813 C 29.006505,137.70313 29.488275,137.42448 29.488281,136.99219 C 29.488275,136.64844 29.381505,136.40235 29.167969,136.25391 C 28.954422,136.10548 28.597651,136.03126 28.097656,136.03125 C 27.639319,136.03126 27.287757,136.1224 27.042969,136.30469 C 26.798174,136.48699 26.675778,136.7474 26.675781,137.08594 L 26.675781,137.21094 L 24.550781,137.21094 L 24.550781,137.05469 C 24.55078,136.1849 24.858072,135.50131 25.472656,135.00391 C 26.087237,134.50652 26.936195,134.25782 28.019531,134.25781 C 29.207026,134.25782 30.117181,134.46355 30.75,134.875 C 31.382805,135.28647 31.699211,135.88022 31.699219,136.65625 L 31.699219,141.48438 C 31.699211,141.83854 31.735669,142.10287 31.808594,142.27734 C 31.881502,142.45182 32.003898,142.58333 32.175781,142.67188 L 32.175781,143.05469 L 29.808594,143.05469 C 29.730463,142.90885 29.670567,142.7474 29.628906,142.57031 C 29.587234,142.39323 29.563796,142.20313 29.558594,142 L 29.558594,142 z M 29.519531,138.875 C 29.149734,139.04688 28.723953,139.1849 28.242188,139.28906 C 27.760413,139.39323 27.511715,139.44792 27.496094,139.45313 C 27.095049,139.56771 26.815101,139.71094 26.65625,139.88281 C 26.497393,140.05469 26.417966,140.29167 26.417969,140.59375 C 26.417966,140.90625 26.519528,141.15495 26.722656,141.33984 C 26.925778,141.52474 27.199215,141.61719 27.542969,141.61719 C 28.157548,141.61719 28.64062,141.44401 28.992188,141.09766 C 29.343744,140.7513 29.519525,140.27865 29.519531,139.67969 L 29.519531,138.875 z M 39.691406,138.85938 C 39.691399,138.00521 39.529941,137.35287 39.207031,136.90234 C 38.884108,136.45183 38.415359,136.22657 37.800781,136.22656 C 37.19661,136.22657 36.736975,136.45053 36.421875,136.89844 C 36.106767,137.34636 35.949216,138.00001 35.949219,138.85938 C 35.949216,139.66146 36.11458,140.28125 36.445313,140.71875 C 36.776038,141.15625 37.243485,141.375 37.847656,141.375 C 38.420567,141.375 38.871088,141.15104 39.199219,140.70313 C 39.527337,140.25521 39.691399,139.64063 39.691406,138.85938 L 39.691406,138.85938 z M 33.738281,146.46094 L 33.738281,134.5625 L 35.902344,134.5625 L 35.902344,135.71094 C 36.230465,135.21095 36.59635,134.84636 37,134.61719 C 37.403641,134.38803 37.878901,134.27345 38.425781,134.27344 C 39.472649,134.27345 40.321607,134.68621 40.972656,135.51172 C 41.623689,136.33725 41.94921,137.42188 41.949219,138.76563 C 41.94921,140.125 41.623689,141.22787 40.972656,142.07422 C 40.321607,142.92057 39.483066,143.34375 38.457031,143.34375 C 37.915359,143.34375 37.432287,143.22917 37.007813,143 C 36.583329,142.77083 36.230465,142.4375 35.949219,142 L 35.949219,146.46094 L 33.738281,146.46094 z M 43.027344,140.28906 L 45.292969,140.28906 C 45.313799,140.72136 45.470049,141.04297 45.761719,141.25391 C 46.053382,141.46485 46.490881,141.57031 47.074219,141.57031 C 47.516922,141.57031 47.85937,141.4961 48.101563,141.34766 C 48.343744,141.19922 48.464838,140.98959 48.464844,140.71875 C 48.464838,140.33334 48.011713,140.04427 47.105469,139.85156 C 46.735673,139.77344 46.441402,139.70573 46.222656,139.64844 C 45.118487,139.36719 44.351561,139.03386 43.921875,138.64844 C 43.492187,138.26303 43.277343,137.74219 43.277344,137.08594 C 43.277343,136.21615 43.591145,135.52735 44.21875,135.01953 C 44.846352,134.51173 45.696611,134.25782 46.769531,134.25781 C 47.904943,134.25782 48.796869,134.51043 49.445313,135.01563 C 50.093742,135.52084 50.438794,136.23178 50.480469,137.14844 L 48.269531,137.14844 C 48.253901,136.78907 48.117182,136.51042 47.859375,136.3125 C 47.601557,136.11459 47.243485,136.01563 46.785156,136.01563 C 46.352861,136.01563 46.031246,136.08074 45.820313,136.21094 C 45.609372,136.34115 45.503903,136.53646 45.503906,136.79688 C 45.503903,137.13542 46.069007,137.4349 47.199219,137.69531 C 47.45963,137.75261 47.665359,137.79948 47.816406,137.83594 C 48.946608,138.10157 49.718743,138.42188 50.132813,138.79688 C 50.546867,139.17188 50.753898,139.70052 50.753906,140.38281 C 50.753898,141.34636 50.414055,142.08073 49.734375,142.58594 C 49.054681,143.09115 48.066401,143.34375 46.769531,143.34375 C 45.597653,143.34375 44.680987,143.08073 44.019531,142.55469 C 43.358072,142.02865 43.027343,141.30469 43.027344,140.38281 L 43.027344,140.28906 z M 57.011719,143.05469 L 57.011719,131.54688 L 59.378906,131.54688 L 59.378906,140.92969 L 64.996094,140.92969 L 64.996094,143.05469 L 57.011719,143.05469 z M 67.972656,138.79688 C 67.972653,139.64063 68.14583,140.29167 68.492188,140.75 C 68.838538,141.20834 69.332027,141.4375 69.972656,141.4375 C 70.602859,141.4375 71.09114,141.20834 71.4375,140.75 C 71.783847,140.29167 71.957024,139.64063 71.957031,138.79688 C 71.957024,137.95834 71.78515,137.3112 71.441406,136.85547 C 71.09765,136.39975 70.608067,136.17188 69.972656,136.17188 C 69.332027,136.17188 68.838538,136.39975 68.492188,136.85547 C 68.14583,137.3112 67.972653,137.95834 67.972656,138.79688 L 67.972656,138.79688 z M 65.667969,138.79688 C 65.667968,137.38542 66.05078,136.27605 66.816406,135.46875 C 67.582029,134.66147 68.634111,134.25782 69.972656,134.25781 C 71.305983,134.25782 72.356764,134.66147 73.125,135.46875 C 73.89322,136.27605 74.277335,137.38542 74.277344,138.79688 C 74.277335,140.21354 73.89322,141.32552 73.125,142.13281 C 72.356764,142.9401 71.305983,143.34375 69.972656,143.34375 C 68.634111,143.34375 67.582029,142.9401 66.816406,142.13281 C 66.05078,141.32552 65.667968,140.21354 65.667969,138.79688 L 65.667969,138.79688 z M 80.949219,139.85156 L 83.191406,139.85156 C 83.097648,140.92969 82.704419,141.78125 82.011719,142.40625 C 81.319004,143.03125 80.42838,143.34375 79.339844,143.34375 C 78.105465,143.34375 77.138019,142.94141 76.4375,142.13672 C 75.736978,141.33203 75.386718,140.21875 75.386719,138.79688 C 75.386718,137.38021 75.744791,136.26954 76.460938,135.46484 C 77.177081,134.66016 78.162757,134.25782 79.417969,134.25781 C 80.516921,134.25782 81.398431,134.54949 82.0625,135.13281 C 82.726555,135.71615 83.097648,136.52865 83.175781,137.57031 L 80.917969,137.57031 C 80.855463,137.11719 80.696609,136.77084 80.441406,136.53125 C 80.186193,136.29167 79.850255,136.17188 79.433594,136.17188 C 78.87109,136.17188 78.450517,136.39324 78.171875,136.83594 C 77.893226,137.27865 77.753903,137.94271 77.753906,138.82813 C 77.753903,139.64584 77.898434,140.27474 78.1875,140.71484 C 78.476559,141.15495 78.891923,141.375 79.433594,141.375 C 79.855464,141.375 80.194005,141.2474 80.449219,140.99219 C 80.704421,140.73698 80.871088,140.35677 80.949219,139.85156 L 80.949219,139.85156 z M 84.675781,143.05469 L 84.675781,131.54688 L 86.886719,131.54688 L 86.886719,137.58594 L 89.589844,134.5625 L 92.324219,134.5625 L 89.363281,137.71094 L 92.503906,143.05469 L 89.777344,143.05469 L 87.746094,139.4375 L 86.886719,140.36719 L 86.886719,143.05469 L 84.675781,143.05469 z " + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" /> + <path + id="path5584" + d="M 23.746094,146.25 L 12.496094,161.25 L 19.996094,161.25 L 19.996094,168.75 L 27.496094,168.75 L 27.496094,161.25 L 34.996094,161.25 L 23.746094,146.25 z M 22.714844,150.46875 L 24.746094,150.46875 L 27.871094,159.09375 L 25.996094,159.09375 L 25.402344,157.3125 L 22.058594,157.3125 L 21.496094,159.09375 L 19.621094,159.09375 L 22.714844,150.46875 z M 23.746094,152.1875 L 22.527344,155.84375 L 24.933594,155.84375 L 23.746094,152.1875 z " + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" /> + </g> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 119.9707,129.82617 L 117.58008,137.17383 L 122.37305,137.17383 L 119.9707,129.82617 M 117.9082,126.36914 L 122.00977,126.36914 L 128.23242,143.63086 L 124.50586,143.63086 L 123.33398,140.08008 L 116.64258,140.08008 L 115.50586,143.63086 L 111.76758,143.63086 L 117.9082,126.36914" + id="text5641" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 172.98047,138.29297 L 176.48438,138.29297 C 176.61718,139.23829 177.0039,139.94141 177.64453,140.40234 C 178.28515,140.85547 179.21093,141.08203 180.42188,141.08203 C 181.45312,141.08203 182.23046,140.89844 182.75391,140.53125 C 183.27733,140.16407 183.53905,139.6211 183.53906,138.90234 C 183.53905,137.85547 182.03515,136.98829 179.02734,136.30078 C 178.98827,136.29298 178.95312,136.28516 178.92188,136.27734 C 178.84374,136.26173 178.72265,136.23438 178.55859,136.19531 C 176.94921,135.84376 175.80078,135.44923 175.11328,135.01172 C 174.5039,134.6211 174.03906,134.09767 173.71875,133.44141 C 173.39844,132.77735 173.23828,131.99611 173.23828,131.09766 C 173.23828,129.41798 173.80859,128.13283 174.94922,127.24219 C 176.08984,126.34377 177.73828,125.89455 179.89453,125.89453 C 181.91015,125.89455 183.48436,126.37111 184.61719,127.32422 C 185.7578,128.27736 186.35936,129.62111 186.42188,131.35547 L 183.01172,131.35547 C 182.94921,130.51954 182.6289,129.88283 182.05078,129.44531 C 181.47265,129.00783 180.64843,128.78908 179.57813,128.78906 C 178.64843,128.78908 177.92968,128.97267 177.42188,129.33984 C 176.92187,129.69923 176.67187,130.21486 176.67188,130.88672 C 176.67187,131.80079 177.65234,132.48439 179.61328,132.9375 C 180.14452,133.06251 180.55859,133.16017 180.85547,133.23047 C 182.11327,133.55079 183.0039,133.80079 183.52734,133.98047 C 184.05858,134.16017 184.51952,134.35938 184.91016,134.57813 C 185.61327,134.96876 186.14061,135.48829 186.49219,136.13672 C 186.84374,136.77735 187.01952,137.54688 187.01953,138.44531 C 187.01952,140.24219 186.41405,141.63672 185.20313,142.62891 C 183.99218,143.61328 182.28515,144.10547 180.08203,144.10547 C 177.91015,144.10547 176.20703,143.60156 174.97266,142.59375 C 173.73828,141.58594 173.07422,140.15235 172.98047,138.29297" + id="text5645" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 236.16211,140.51367 L 239.00977,140.51367 C 240.65819,140.51367 241.8496,140.08399 242.58398,139.22461 C 243.32616,138.35743 243.69725,136.95508 243.69727,135.01758 C 243.69725,133.0879 243.3535,131.66993 242.66602,130.76367 C 241.9785,129.85744 240.90429,129.40431 239.44336,129.4043 L 236.16211,129.4043 L 236.16211,140.51367 M 232.68164,143.63086 L 232.68164,126.36914 L 239.44336,126.36914 C 242.09179,126.36916 244.06444,127.084 245.36133,128.51367 C 246.666,129.94337 247.31834,132.11134 247.31836,135.01758 C 247.31834,136.59571 247.07616,137.98633 246.5918,139.18945 C 246.11522,140.39258 245.41991,141.36133 244.50586,142.0957 C 243.81835,142.64258 243.0371,143.03711 242.16211,143.2793 C 241.2871,143.51367 240.06054,143.63086 238.48242,143.63086 L 232.68164,143.63086" + id="text5649" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 293.97656,143.63086 L 293.97656,126.36914 L 306.02344,126.36914 L 306.02344,129.36914 L 297.48047,129.36914 L 297.48047,133.2832 L 304.96875,133.2832 L 304.96875,136.2832 L 297.48047,136.2832 L 297.48047,143.63086 L 293.97656,143.63086" + id="text5653" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 365.17969,141.57422 C 364.53905,142.44141 363.80858,143.07813 362.98828,143.48438 C 362.17577,143.89062 361.21874,144.09375 360.11719,144.09375 C 357.70312,144.09375 355.74609,143.25781 354.24609,141.58594 C 352.7539,139.90625 352.00781,137.70313 352.00781,134.97656 C 352.00781,132.22657 352.7539,130.02736 354.24609,128.37891 C 355.73828,126.73049 357.72656,125.90627 360.21094,125.90625 C 362.37499,125.90627 364.14061,126.4258 365.50781,127.46484 C 366.87498,128.49611 367.68748,129.91798 367.94531,131.73047 L 364.32422,131.73047 C 364.10546,130.83204 363.65624,130.14845 362.97656,129.67969 C 362.30468,129.21095 361.42577,128.97658 360.33984,128.97656 C 358.89452,128.97658 357.75781,129.50783 356.92969,130.57031 C 356.10937,131.62501 355.69921,133.08595 355.69922,134.95313 C 355.69921,136.82813 356.1289,138.29688 356.98828,139.35938 C 357.84765,140.42188 359.02734,140.95313 360.52734,140.95313 C 361.65233,140.95313 362.59374,140.6211 363.35156,139.95703 C 364.10936,139.29297 364.57811,138.38282 364.75781,137.22656 L 360.84375,137.22656 L 360.84375,134.27344 L 367.99219,134.27344 L 367.99219,143.61328 L 365.61328,143.61328 L 365.17969,141.57422" + id="text5657" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 412.86328,143.63086 L 412.86328,126.36914 L 416.4375,126.36914 L 416.4375,132.80273 L 423.5625,132.80273 L 423.5625,126.36914 L 427.13672,126.36914 L 427.13672,143.63086 L 423.5625,143.63086 L 423.5625,135.97852 L 416.4375,135.97852 L 416.4375,143.63086 L 412.86328,143.63086" + id="text5661" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 474.48047,136.95703 L 477.91406,136.95703 L 477.91406,139.04297 C 477.91406,139.64453 478.09375,140.10547 478.45313,140.42578 C 478.8125,140.73828 479.32812,140.89453 480,140.89453 C 480.73437,140.89453 481.24609,140.70313 481.53516,140.32031 C 481.82421,139.9375 481.96874,139.21875 481.96875,138.16406 L 481.96875,126.12891 L 485.51953,126.12891 L 485.51953,138.32813 C 485.51952,139.42188 485.45311,140.22657 485.32031,140.74219 C 485.1953,141.25 484.98436,141.69922 484.6875,142.08984 C 484.23436,142.66797 483.61327,143.10938 482.82422,143.41406 C 482.03515,143.71875 481.10937,143.87109 480.04688,143.87109 C 479.07031,143.87109 478.20703,143.73828 477.45703,143.47266 C 476.70703,143.20703 476.08203,142.8125 475.58203,142.28906 C 475.18359,141.86719 474.89844,141.39844 474.72656,140.88281 C 474.5625,140.35938 474.48047,139.5 474.48047,138.30469 L 474.48047,136.95703" + id="text5665" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 532.32422,143.63086 L 532.32422,126.36914 L 535.875,126.36914 L 535.875,133.45898 L 542.61328,126.36914 L 547.05469,126.36914 L 540.16406,133.35352 L 547.67578,143.63086 L 543.33984,143.63086 L 537.71484,135.73242 L 535.875,137.56055 L 535.875,143.63086 L 532.32422,143.63086" + id="text5669" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 594.01172,143.63086 L 594.01172,126.36914 L 597.5625,126.36914 L 597.5625,140.44336 L 605.98828,140.44336 L 605.98828,143.63086 L 594.01172,143.63086" + id="text5673" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 143.15039,203.63086 L 143.15039,200.63086 L 152.53711,189.49805 L 143.33789,189.49805 L 143.33789,186.36914 L 156.84961,186.36914 L 156.84961,189.36914 L 147.43945,200.51367 L 156.63867,200.51367 L 156.63867,203.63086 L 143.15039,203.63086" + id="text5679" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 202.37109,203.63086 L 207.79688,194.81836 L 202.37109,186.36914 L 206.47266,186.36914 L 210,192.4043 L 213.50391,186.36914 L 217.62891,186.36914 L 212.20313,194.79492 L 217.62891,203.63086 L 213.52734,203.63086 L 210,197.6543 L 206.47266,203.63086 L 202.37109,203.63086" + id="text5683" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 277.875,197.68359 C 277.74217,199.64454 276.98436,201.20313 275.60156,202.35938 C 274.22655,203.51563 272.42968,204.09375 270.21094,204.09375 C 267.65624,204.09375 265.66796,203.29688 264.24609,201.70313 C 262.83203,200.10938 262.125,197.87501 262.125,195 C 262.125,192.06251 262.84765,189.81251 264.29297,188.25 C 265.73828,186.68752 267.8164,185.90627 270.52734,185.90625 C 272.73046,185.90627 274.46874,186.44533 275.74219,187.52344 C 277.02342,188.59377 277.72655,190.10939 277.85156,192.07031 L 274.34766,192.07031 C 274.19921,191.09376 273.80077,190.35158 273.15234,189.84375 C 272.50389,189.32814 271.6289,189.07033 270.52734,189.07031 C 268.96484,189.07033 267.77734,189.57423 266.96484,190.58203 C 266.15234,191.58986 265.74609,193.06251 265.74609,195 C 265.74609,196.87501 266.14843,198.32422 266.95313,199.34766 C 267.76562,200.3711 268.91796,200.88282 270.41016,200.88281 C 271.48827,200.88282 272.37108,200.60938 273.05859,200.0625 C 273.74608,199.50782 274.19139,198.71485 274.39453,197.68359 L 277.875,197.68359" + id="text5687" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 328.33594,203.63086 L 322.38281,186.36914 L 326.32031,186.36914 L 329.98828,199.2832 L 333.72656,186.36914 L 337.61719,186.36914 L 331.73438,203.63086 L 328.33594,203.63086" + id="text5691" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 386.32031,200.51367 L 390.52734,200.51367 C 391.51952,200.51367 392.24218,200.33399 392.69531,199.97461 C 393.14843,199.61524 393.37499,199.04883 393.375,198.27539 C 393.37499,197.47071 393.15233,196.89258 392.70703,196.54102 C 392.26171,196.18165 391.52733,196.00196 390.50391,196.00195 L 386.32031,196.00195 L 386.32031,200.51367 M 386.32031,193.04883 L 390.375,193.04883 C 391.24999,193.04884 391.89061,192.9004 392.29688,192.60352 C 392.70311,192.29884 392.90624,191.82228 392.90625,191.17383 C 392.90624,190.54103 392.70702,190.084 392.30859,189.80273 C 391.91796,189.51369 391.26561,189.36915 390.35156,189.36914 L 386.32031,189.36914 L 386.32031,193.04883 M 382.92188,203.63086 L 382.92188,186.36914 L 391.05469,186.36914 C 392.8203,186.36916 394.16405,186.74416 395.08594,187.49414 C 396.01561,188.23634 396.48045,189.31837 396.48047,190.74023 C 396.48045,191.61525 396.30858,192.34571 395.96484,192.93164 C 395.62108,193.51759 395.10545,193.97071 394.41797,194.29102 C 395.30858,194.6504 395.97264,195.16993 396.41016,195.84961 C 396.85545,196.52149 397.07811,197.36133 397.07813,198.36914 C 397.07811,200.04883 396.53123,201.34571 395.4375,202.25977 C 394.34374,203.17383 392.79296,203.63086 390.78516,203.63086 L 382.92188,203.63086" + id="text5695" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 442.88672,203.63086 L 442.88672,186.36914 L 446.60156,186.36914 L 453.60938,198.22852 L 453.60938,186.36914 L 457.11328,186.36914 L 457.11328,203.63086 L 453.44531,203.63086 L 446.39063,191.77148 L 446.39063,203.63086 L 442.88672,203.63086" + id="text5699" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 501.32813,203.63086 L 501.32813,186.36914 L 506.57813,186.36914 L 510.01172,199.50586 L 513.39844,186.36914 L 518.67188,186.36914 L 518.67188,203.63086 L 515.34375,203.63086 L 515.34375,189.70898 L 511.83984,203.63086 L 508.20703,203.63086 L 504.65625,189.70898 L 504.65625,203.63086 L 501.32813,203.63086" + id="text5703" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 658.22461,134.6543 L 658.22461,131.10352 L 661.77539,131.10352 L 661.77539,134.6543 L 658.22461,134.6543 M 658.22461,143.63086 L 658.22461,140.10352 L 661.77539,140.10352 L 661.77539,143.63086 L 658.22461,143.63086 M 658.24805,164.6543 L 658.24805,161.10352 L 661.77539,161.10352 L 661.77539,164.6543 L 658.24805,164.6543 M 658.24805,177.68555 L 658.24805,176.31445 C 658.90429,176.12695 659.38867,175.83789 659.70117,175.44727 C 660.01367,175.05664 660.16992,174.54883 660.16992,173.92383 L 660.16992,173.63086 L 658.22461,173.63086 L 658.22461,170.10352 L 661.77539,170.10352 L 661.77539,173.49023 C 661.77539,174.66211 661.47851,175.59961 660.88477,176.30273 C 660.29101,177.01367 659.41211,177.47461 658.24805,177.68555" + id="text5725" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 720.78516,126.7793 L 723.03516,126.7793 L 723.03516,133.33008 L 720.78516,133.33008 L 720.78516,126.7793 M 716.96484,126.7793 L 719.21484,126.7793 L 719.21484,133.33008 L 716.96484,133.33008 L 716.96484,126.7793 M 718.88672,156.7793 L 721.13672,156.7793 L 721.13672,163.33008 L 718.88672,163.33008 L 718.88672,156.7793" + id="text5731" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 772.5,140.60938 L 772.5,129.10156 L 780.85156,129.10156 L 780.85156,131.10156 L 774.83594,131.10156 L 774.83594,133.55469 L 780.33594,133.55469 L 780.33594,135.52344 L 774.83594,135.52344 L 774.83594,138.48438 L 781.13281,138.48438 L 781.13281,140.60938 L 772.5,140.60938 M 782.74219,140.60938 L 782.74219,132.11719 L 784.96875,132.11719 L 784.96875,133.125 C 785.28645,132.71355 785.66145,132.40626 786.09375,132.20313 C 786.52604,131.9948 787.00781,131.89063 787.53906,131.89063 C 788.47656,131.89063 789.17708,132.13543 789.64063,132.625 C 790.10937,133.10938 790.34374,133.84115 790.34375,134.82031 L 790.34375,140.60938 L 788.07031,140.60938 L 788.07031,135.47656 C 788.07031,134.86719 787.96614,134.4323 787.75781,134.17188 C 787.55468,133.91147 787.22135,133.78126 786.75781,133.78125 C 786.22135,133.78126 785.79687,133.94271 785.48438,134.26563 C 785.17187,134.58334 785.01562,135.01823 785.01563,135.57031 L 785.01563,140.60938 L 782.74219,140.60938 M 796.07813,140.67188 C 795.86979,140.67708 795.61979,140.6849 795.32813,140.69531 C 795.04166,140.71094 794.85937,140.71875 794.78125,140.71875 C 793.91146,140.71875 793.3151,140.55729 792.99219,140.23438 C 792.67448,139.90625 792.51562,139.26302 792.51563,138.30469 L 792.51563,133.71094 L 791.39063,133.71094 L 791.39063,132.11719 L 792.51563,132.11719 L 792.51563,129.79688 L 794.76563,129.79688 L 794.76563,132.11719 L 796.07813,132.11719 L 796.07813,133.71094 L 794.76563,133.71094 L 794.76563,138.41406 C 794.76562,138.63802 794.8151,138.78646 794.91406,138.85938 C 795.01302,138.92709 795.21614,138.96094 795.52344,138.96094 L 796.07813,138.96094 L 796.07813,140.67188 M 802.63281,138.03125 L 804.89844,138.03125 C 804.66926,138.92709 804.20572,139.63021 803.50781,140.14063 C 802.8151,140.64583 801.96874,140.89844 800.96875,140.89844 C 799.73958,140.89844 798.76562,140.48698 798.04688,139.66406 C 797.32812,138.83594 796.96875,137.71615 796.96875,136.30469 C 796.96875,134.91407 797.32292,133.81772 798.03125,133.01563 C 798.73958,132.21355 799.70833,131.81251 800.9375,131.8125 C 802.23958,131.81251 803.24478,132.20834 803.95313,133 C 804.66145,133.78647 805.01562,134.90886 805.01563,136.36719 C 805.01562,136.52865 805.01301,136.65105 805.00781,136.73438 C 805.0078,136.8125 805.0026,136.88802 804.99219,136.96094 L 799.32031,136.96094 C 799.35156,137.62761 799.51302,138.13021 799.80469,138.46875 C 800.10156,138.80729 800.52604,138.97656 801.07813,138.97656 C 801.46874,138.97656 801.78906,138.90104 802.03906,138.75 C 802.28906,138.59375 802.48697,138.35417 802.63281,138.03125 M 799.32031,135.46875 L 802.66406,135.46875 C 802.64322,134.89584 802.48958,134.46094 802.20313,134.16406 C 801.92187,133.86199 801.51562,133.71094 800.98438,133.71094 C 800.48958,133.71094 800.09895,133.86199 799.8125,134.16406 C 799.53125,134.46615 799.36718,134.90105 799.32031,135.46875 M 806.52344,140.60938 L 806.52344,132.11719 L 808.63281,132.11719 L 808.63281,133.57031 C 808.92968,132.98699 809.27604,132.5599 809.67188,132.28906 C 810.0677,132.01303 810.53906,131.87501 811.08594,131.875 C 811.17447,131.87501 811.24218,131.87761 811.28906,131.88281 C 811.34114,131.88282 811.38281,131.88543 811.41406,131.89063 L 811.42188,134.19531 L 810.66406,134.19531 C 810.04427,134.19532 809.57812,134.35678 809.26563,134.67969 C 808.95312,135.00261 808.79687,135.48178 808.79688,136.11719 L 808.79688,140.60938 L 806.52344,140.60938" + id="text5737" /> + <path + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="M 787.5,172.5 L 787.5,157.5 L 772.5,165 L 787.5,172.5 z " + id="path5745" /> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1" + d="M 810,150 L 810,165 L 780,165" + id="path5747" /> + <g + id="g3601"> + <path + id="text5753" + d="M 12.496094,197.64063 L 14.832032,197.64063 C 14.92057,198.27084 15.178382,198.73828 15.605469,199.04297 C 16.032548,199.34766 16.649735,199.5 17.457032,199.5 C 18.144525,199.5 18.662754,199.37761 19.011719,199.13281 C 19.36067,198.88802 19.535149,198.52604 19.535157,198.04688 C 19.535149,197.34896 18.532546,196.77084 16.527344,196.3125 C 16.501298,196.3073 16.47786,196.30209 16.457032,196.29688 C 16.404944,196.28646 16.324215,196.26823 16.214844,196.24219 C 15.141924,196.00782 14.3763,195.7448 13.917969,195.45313 C 13.511717,195.19271 13.201822,194.84245 12.988282,194.40234 C 12.774739,193.96225 12.667968,193.44272 12.667969,192.84375 C 12.667968,191.72397 13.048176,190.8659 13.808594,190.26953 C 14.569008,189.67319 15.667965,189.37501 17.105469,189.375 C 18.449212,189.37501 19.499993,189.69272 20.257813,190.32813 C 21.015616,190.96355 21.415355,191.85938 21.457032,193.01563 L 19.183594,193.01563 C 19.14192,192.45834 18.928379,192.03386 18.542969,191.74219 C 18.157546,191.45053 17.608067,191.3047 16.894532,191.30469 C 16.274735,191.3047 15.796871,191.42579 15.460938,191.66797 C 15.124997,191.91017 14.957028,192.25522 14.957032,192.70313 C 14.957028,193.31251 15.610674,193.76824 16.917969,194.07031 C 17.27213,194.15365 17.548172,194.21876 17.746094,194.26563 C 18.584629,194.47917 19.17968,194.64584 19.53125,194.76563 C 19.882805,194.88542 20.188794,195.01824 20.449219,195.16406 C 20.91796,195.42448 21.269522,195.76954 21.503907,196.19922 C 21.738272,196.62891 21.855459,197.14323 21.855469,197.74219 C 21.855459,198.94011 21.451814,199.86849 20.644532,200.52734 C 19.837232,201.1862 18.699212,201.51562 17.230469,201.51563 C 15.782548,201.51562 14.647133,201.17969 13.824219,200.50781 C 13.001301,199.83594 12.558593,198.88021 12.496094,197.64063 L 12.496094,197.64063 z M 23.566407,201.19531 L 23.566407,189.6875 L 25.824219,189.6875 L 25.824219,193.64063 C 26.131507,193.25522 26.497392,192.96485 26.921875,192.76953 C 27.34635,192.57423 27.82161,192.47657 28.347657,192.47656 C 28.84765,192.47657 29.299473,192.56251 29.703125,192.73438 C 30.106764,192.90626 30.433586,193.15105 30.683594,193.46875 C 30.855461,193.6823 30.976554,193.92709 31.046875,194.20313 C 31.117179,194.47917 31.152335,194.92188 31.152344,195.53125 L 31.152344,195.6875 L 31.152344,201.19531 L 28.894532,201.19531 L 28.894532,196.75 C 28.894525,195.69792 28.798171,195.03777 28.605469,194.76953 C 28.412755,194.50131 28.066401,194.36719 27.566407,194.36719 C 27.029944,194.36719 26.605465,194.52735 26.292969,194.84766 C 25.980466,195.16797 25.824216,195.60417 25.824219,196.15625 L 25.824219,201.19531 L 23.566407,201.19531 z M 33.191407,191.75781 L 33.191407,189.6875 L 35.464844,189.6875 L 35.464844,191.75781 L 33.191407,191.75781 z M 33.191407,201.19531 L 33.191407,192.70313 L 35.464844,192.70313 L 35.464844,201.19531 L 33.191407,201.19531 z M 37.886719,201.19531 L 37.886719,194.29688 L 36.675782,194.29688 L 36.675782,192.70313 L 37.886719,192.70313 L 37.886719,191.91406 C 37.886718,191.12241 38.091144,190.54038 38.5,190.16797 C 38.908852,189.79558 39.553383,189.60939 40.433594,189.60938 C 40.595048,189.60939 40.765621,189.61329 40.945313,189.62109 C 41.124996,189.62892 41.316402,189.64324 41.519532,189.66406 L 41.519532,191.46875 L 40.925782,191.46875 C 40.587236,191.46876 40.36458,191.51303 40.257813,191.60156 C 40.151038,191.69011 40.097653,191.85938 40.097657,192.10938 L 40.097657,192.70313 L 41.519532,192.70313 L 41.519532,194.29688 L 40.113282,194.29688 L 40.113282,201.19531 L 37.886719,201.19531 z M 46.449219,201.25781 C 46.240881,201.26302 45.992183,201.27214 45.703125,201.28516 C 45.414059,201.29818 45.230465,201.30469 45.152344,201.30469 C 44.28255,201.30469 43.687498,201.14193 43.367188,200.81641 C 43.046874,200.49089 42.886718,199.84896 42.886719,198.89063 L 42.886719,194.29688 L 41.761719,194.29688 L 41.761719,192.70313 L 42.886719,192.70313 L 42.886719,190.38281 L 45.136719,190.38281 L 45.136719,192.70313 L 46.449219,192.70313 L 46.449219,194.29688 L 45.136719,194.29688 L 45.136719,199 C 45.136716,199.22396 45.186195,199.3711 45.285157,199.44141 C 45.384111,199.51172 45.587236,199.54688 45.894532,199.54688 L 46.449219,199.54688 L 46.449219,201.25781 z " + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" /> + <path + style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" + d="M 24.746094,207.125 L 13.496094,222.125 L 20.996094,222.125 L 20.996094,229.625 L 28.496094,229.625 L 28.496094,222.125 L 35.996094,222.125 L 24.746094,207.125 z " + id="path5757" /> + </g> + <g + id="g5795" + transform="translate(727.5,0)"> + <text + sodipodi:linespacing="125%" + id="text5797" + y="201.19531" + x="31.8125" + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + xml:space="preserve"><tspan + y="201.19531" + x="31.8125" + id="tspan5799" + sodipodi:role="line">Shift</tspan></text> + <path + id="path5801" + d="M 27.25,207.125 L 16,222.125 L 23.5,222.125 L 23.5,229.625 L 31,229.625 L 31,222.125 L 38.5,222.125 L 27.25,207.125 z " + style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> + </g> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 576.90234,189.63867 L 576.90234,192.20508 L 566.4375,196.48242 L 576.90234,200.74805 L 576.90234,203.31445 L 563.09766,197.63086 L 563.09766,195.29883 L 576.90234,189.63867 M 568.21875,237.68555 L 568.21875,236.31445 C 568.875,236.12695 569.35937,235.83789 569.67188,235.44727 C 569.98437,235.05664 570.14062,234.54883 570.14063,233.92383 L 570.14063,233.63086 L 568.21875,233.63086 L 568.21875,230.10352 L 571.76953,230.10352 L 571.76953,233.49023 C 571.76953,234.6543 571.46875,235.59179 570.86719,236.30273 C 570.27343,237.01367 569.39062,237.47461 568.21875,237.68555" + id="text5803" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 623.09766,189.63867 L 636.90234,195.29883 L 636.90234,197.63086 L 623.09766,203.31445 L 623.09766,200.74805 L 633.58594,196.48242 L 623.09766,192.20508 L 623.09766,189.63867 M 628.21875,233.63086 L 628.21875,230.10352 L 631.74609,230.10352 L 631.74609,233.63086 L 628.21875,233.63086" + id="text5813" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 688.44727,198.61523 C 688.44726,198.5293 688.44335,198.41602 688.43555,198.27539 C 688.42773,198.12696 688.42382,198.01758 688.42383,197.94727 C 688.42382,197.25977 688.49804,196.68946 688.64648,196.23633 C 688.79492,195.7754 689.0332,195.34571 689.36133,194.94727 C 689.61132,194.6504 689.98242,194.31056 690.47461,193.92773 C 690.9746,193.54493 691.29882,193.26759 691.44727,193.0957 C 691.75976,192.74415 691.9746,192.42775 692.0918,192.14648 C 692.20898,191.86525 692.26757,191.55665 692.26758,191.2207 C 692.26757,190.47853 692.06054,189.9004 691.64648,189.48633 C 691.23241,189.07228 690.65429,188.86525 689.91211,188.86523 C 689.16992,188.86525 688.58398,189.11525 688.1543,189.61523 C 687.73242,190.10744 687.50195,190.80275 687.46289,191.70117 L 684.1582,191.70117 L 684.1582,191.33789 C 684.1582,189.68947 684.67773,188.37697 685.7168,187.40039 C 686.76367,186.41603 688.16992,185.92385 689.93555,185.92383 C 691.74023,185.92385 693.17382,186.38869 694.23633,187.31836 C 695.30663,188.24025 695.84178,189.47853 695.8418,191.0332 C 695.84178,191.58009 695.77928,192.07228 695.6543,192.50977 C 695.5371,192.93946 695.3535,193.33399 695.10352,193.69336 C 694.78319,194.14649 694.2871,194.63868 693.61523,195.16992 C 692.95116,195.69337 692.54882,196.01759 692.4082,196.14258 C 692.11132,196.43165 691.89648,196.73634 691.76367,197.05664 C 691.63866,197.37696 691.57616,197.75977 691.57617,198.20508 C 691.57616,198.24415 691.58007,198.31055 691.58789,198.4043 C 691.59569,198.49805 691.5996,198.56836 691.59961,198.61523 L 688.44727,198.61523 M 688.2832,203.63086 L 688.2832,200.19727 L 691.74023,200.19727 L 691.74023,203.63086 L 688.2832,203.63086 M 686.31445,235.85742 L 692.12695,215.92383 L 693.73242,215.92383 L 687.89648,235.85742 L 686.31445,235.85742" + id="text5819" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 18,271.78906 C 17.911447,273.09636 17.406239,274.13542 16.484375,274.90625 C 15.5677,275.67708 14.369784,276.0625 12.890625,276.0625 C 11.187496,276.0625 9.8619761,275.53125 8.9140625,274.46875 C 7.971353,273.40625 7.4999993,271.91667 7.5,270 C 7.4999993,268.04167 7.9817696,266.54168 8.9453125,265.5 C 9.9088511,264.45834 11.294266,263.93751 13.101563,263.9375 C 14.570305,263.93751 15.729158,264.29689 16.578125,265.01563 C 17.432281,265.72918 17.901031,266.73959 17.984375,268.04688 L 15.648438,268.04688 C 15.54947,267.39584 15.283846,266.90105 14.851563,266.5625 C 14.419263,266.21876 13.83593,266.04688 13.101563,266.04688 C 12.059891,266.04688 11.268225,266.38282 10.726563,267.05469 C 10.184892,267.72657 9.9140594,268.70834 9.9140625,270 C 9.9140594,271.25 10.182288,272.21615 10.71875,272.89844 C 11.260412,273.58073 12.028641,273.92188 13.023438,273.92188 C 13.742181,273.92188 14.330722,273.73959 14.789063,273.375 C 15.247387,273.00521 15.544262,272.47657 15.679688,271.78906 L 18,271.78906 M 23.46875,275.80469 C 23.260412,275.8099 23.010412,275.81771 22.71875,275.82813 C 22.432288,275.84375 22.249996,275.85156 22.171875,275.85156 C 21.302081,275.85156 20.705727,275.6901 20.382813,275.36719 C 20.065103,275.03906 19.906249,274.39583 19.90625,273.4375 L 19.90625,268.84375 L 18.78125,268.84375 L 18.78125,267.25 L 19.90625,267.25 L 19.90625,264.92969 L 22.15625,264.92969 L 22.15625,267.25 L 23.46875,267.25 L 23.46875,268.84375 L 22.15625,268.84375 L 22.15625,273.54688 C 22.156247,273.77084 22.205726,273.91927 22.304688,273.99219 C 22.403642,274.0599 22.606767,274.09375 22.914063,274.09375 L 23.46875,274.09375 L 23.46875,275.80469 M 24.789063,275.74219 L 24.789063,267.25 L 26.898438,267.25 L 26.898438,268.70313 C 27.195309,268.1198 27.541663,267.69272 27.9375,267.42188 C 28.333329,267.14584 28.804682,267.00782 29.351563,267.00781 C 29.440099,267.00782 29.507807,267.01043 29.554688,267.01563 C 29.606765,267.01563 29.648432,267.01824 29.679688,267.02344 L 29.6875,269.32813 L 28.929688,269.32813 C 28.309891,269.32813 27.843746,269.48959 27.53125,269.8125 C 27.218747,270.13542 27.062497,270.61459 27.0625,271.25 L 27.0625,275.74219 L 24.789063,275.74219 M 31.023438,275.74219 L 31.023438,264.23438 L 33.296875,264.23438 L 33.296875,275.74219 L 31.023438,275.74219" + id="text5827" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 162.96875,266.49609 L 161.375,271.39453 L 164.57031,271.39453 L 162.96875,266.49609 M 161.59375,264.19141 L 164.32813,264.19141 L 168.47656,275.69922 L 165.99219,275.69922 L 165.21094,273.33203 L 160.75,273.33203 L 159.99219,275.69922 L 157.5,275.69922 L 161.59375,264.19141 M 169.53906,275.69922 L 169.53906,264.19141 L 171.8125,264.19141 L 171.8125,275.69922 L 169.53906,275.69922 M 177.64063,275.76172 C 177.43229,275.76693 177.18229,275.77474 176.89063,275.78516 C 176.60416,275.80078 176.42187,275.80859 176.34375,275.80859 C 175.47396,275.80859 174.8776,275.64714 174.55469,275.32422 C 174.23698,274.99609 174.07812,274.35287 174.07813,273.39453 L 174.07813,268.80078 L 172.95313,268.80078 L 172.95313,267.20703 L 174.07813,267.20703 L 174.07813,264.88672 L 176.32813,264.88672 L 176.32813,267.20703 L 177.64063,267.20703 L 177.64063,268.80078 L 176.32813,268.80078 L 176.32813,273.50391 C 176.32812,273.72787 176.3776,273.8763 176.47656,273.94922 C 176.57552,274.01693 176.77864,274.05078 177.08594,274.05078 L 177.64063,274.05078 L 177.64063,275.76172" + id="text5831" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 612.96875,266.53906 L 611.375,271.4375 L 614.57031,271.4375 L 612.96875,266.53906 M 611.59375,264.23438 L 614.32813,264.23438 L 618.47656,275.74219 L 615.99219,275.74219 L 615.21094,273.375 L 610.75,273.375 L 609.99219,275.74219 L 607.5,275.74219 L 611.59375,264.23438 M 619.53906,275.74219 L 619.53906,264.23438 L 621.8125,264.23438 L 621.8125,275.74219 L 619.53906,275.74219 M 627.64063,275.80469 C 627.43229,275.8099 627.18229,275.81771 626.89063,275.82813 C 626.60416,275.84375 626.42187,275.85156 626.34375,275.85156 C 625.47396,275.85156 624.8776,275.6901 624.55469,275.36719 C 624.23698,275.03906 624.07812,274.39583 624.07813,273.4375 L 624.07813,268.84375 L 622.95313,268.84375 L 622.95313,267.25 L 624.07813,267.25 L 624.07813,264.92969 L 626.32813,264.92969 L 626.32813,267.25 L 627.64063,267.25 L 627.64063,268.84375 L 626.32813,268.84375 L 626.32813,273.54688 C 626.32812,273.77084 626.3776,273.91927 626.47656,273.99219 C 626.57552,274.0599 626.77864,274.09375 627.08594,274.09375 L 627.64063,274.09375 L 627.64063,275.80469 M 642,274.38281 C 641.57291,274.96094 641.08593,275.38542 640.53906,275.65625 C 639.99739,275.92708 639.35937,276.0625 638.625,276.0625 C 637.01562,276.0625 635.71093,275.50521 634.71094,274.39063 C 633.71614,273.27084 633.21875,271.80209 633.21875,269.98438 C 633.21875,268.15105 633.71614,266.6849 634.71094,265.58594 C 635.70573,264.48699 637.03125,263.93751 638.6875,263.9375 C 640.1302,263.93751 641.30728,264.28387 642.21875,264.97656 C 643.1302,265.66407 643.67186,266.61199 643.84375,267.82031 L 641.42969,267.82031 C 641.28385,267.22136 640.98437,266.76563 640.53125,266.45313 C 640.08333,266.14063 639.49739,265.98438 638.77344,265.98438 C 637.80989,265.98438 637.05208,266.33855 636.5,267.04688 C 635.95312,267.75001 635.67968,268.72397 635.67969,269.96875 C 635.67968,271.21875 635.96614,272.19792 636.53906,272.90625 C 637.11197,273.61459 637.89843,273.96875 638.89844,273.96875 C 639.64843,273.96875 640.27603,273.7474 640.78125,273.30469 C 641.28645,272.86198 641.59895,272.25521 641.71875,271.48438 L 639.10938,271.48438 L 639.10938,269.51563 L 643.875,269.51563 L 643.875,275.74219 L 642.28906,275.74219 L 642,274.38281 M 645.96094,275.74219 L 645.96094,267.25 L 648.07031,267.25 L 648.07031,268.70313 C 648.36718,268.1198 648.71354,267.69272 649.10938,267.42188 C 649.5052,267.14584 649.97656,267.00782 650.52344,267.00781 C 650.61197,267.00782 650.67968,267.01043 650.72656,267.01563 C 650.77864,267.01563 650.82031,267.01824 650.85156,267.02344 L 650.85938,269.32813 L 650.10156,269.32813 C 649.48177,269.32813 649.01562,269.48959 648.70313,269.8125 C 648.39062,270.13542 648.23437,270.61459 648.23438,271.25 L 648.23438,275.74219 L 645.96094,275.74219" + id="text5835" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 828,271.78906 C 827.91145,273.09636 827.40624,274.13542 826.48438,274.90625 C 825.5677,275.67708 824.36978,276.0625 822.89063,276.0625 C 821.1875,276.0625 819.86198,275.53125 818.91406,274.46875 C 817.97135,273.40625 817.5,271.91667 817.5,270 C 817.5,268.04167 817.98177,266.54168 818.94531,265.5 C 819.90885,264.45834 821.29427,263.93751 823.10156,263.9375 C 824.5703,263.93751 825.72916,264.29689 826.57813,265.01563 C 827.43228,265.72918 827.90103,266.73959 827.98438,268.04688 L 825.64844,268.04688 C 825.54947,267.39584 825.28385,266.90105 824.85156,266.5625 C 824.41926,266.21876 823.83593,266.04688 823.10156,266.04688 C 822.05989,266.04688 821.26822,266.38282 820.72656,267.05469 C 820.18489,267.72657 819.91406,268.70834 819.91406,270 C 819.91406,271.25 820.18229,272.21615 820.71875,272.89844 C 821.26041,273.58073 822.02864,273.92188 823.02344,273.92188 C 823.74218,273.92188 824.33072,273.73959 824.78906,273.375 C 825.24739,273.00521 825.54426,272.47657 825.67969,271.78906 L 828,271.78906 M 833.46875,275.80469 C 833.26041,275.8099 833.01041,275.81771 832.71875,275.82813 C 832.43229,275.84375 832.25,275.85156 832.17188,275.85156 C 831.30208,275.85156 830.70573,275.6901 830.38281,275.36719 C 830.0651,275.03906 829.90625,274.39583 829.90625,273.4375 L 829.90625,268.84375 L 828.78125,268.84375 L 828.78125,267.25 L 829.90625,267.25 L 829.90625,264.92969 L 832.15625,264.92969 L 832.15625,267.25 L 833.46875,267.25 L 833.46875,268.84375 L 832.15625,268.84375 L 832.15625,273.54688 C 832.15625,273.77084 832.20573,273.91927 832.30469,273.99219 C 832.40364,274.0599 832.60677,274.09375 832.91406,274.09375 L 833.46875,274.09375 L 833.46875,275.80469 M 834.78906,275.74219 L 834.78906,267.25 L 836.89844,267.25 L 836.89844,268.70313 C 837.19531,268.1198 837.54166,267.69272 837.9375,267.42188 C 838.33333,267.14584 838.80468,267.00782 839.35156,267.00781 C 839.4401,267.00782 839.50781,267.01043 839.55469,267.01563 C 839.60677,267.01563 839.64843,267.01824 839.67969,267.02344 L 839.6875,269.32813 L 838.92969,269.32813 C 838.30989,269.32813 837.84375,269.48959 837.53125,269.8125 C 837.21875,270.13542 837.0625,270.61459 837.0625,271.25 L 837.0625,275.74219 L 834.78906,275.74219 M 841.02344,275.74219 L 841.02344,264.23438 L 843.29688,264.23438 L 843.29688,275.74219 L 841.02344,275.74219" + id="text5839" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 108.94531,264.01953 L 105.64844,252.51172 L 108.10156,252.51172 L 110.07031,260.62891 L 111.73438,252.51172 L 114.25781,252.51172 L 115.92188,260.62891 L 117.89063,252.51172 L 120.32031,252.51172 L 117.03125,264.01953 L 114.77344,264.01953 L 112.99219,255.20703 L 111.20313,264.01953 L 108.94531,264.01953 M 121.5,254.58203 L 121.5,252.51172 L 123.77344,252.51172 L 123.77344,254.58203 L 121.5,254.58203 M 121.5,264.01953 L 121.5,255.52734 L 123.77344,255.52734 L 123.77344,264.01953 L 121.5,264.01953 M 125.79688,264.01953 L 125.79688,255.52734 L 128.02344,255.52734 L 128.02344,256.53516 C 128.34114,256.12371 128.71614,255.81641 129.14844,255.61328 C 129.58072,255.40496 130.06249,255.30079 130.59375,255.30078 C 131.53124,255.30079 132.23176,255.54558 132.69531,256.03516 C 133.16405,256.51954 133.39843,257.25131 133.39844,258.23047 L 133.39844,264.01953 L 131.125,264.01953 L 131.125,258.88672 C 131.12499,258.27735 131.02083,257.84245 130.8125,257.58203 C 130.60937,257.32162 130.27604,257.19141 129.8125,257.19141 C 129.27604,257.19141 128.85156,257.35287 128.53906,257.67578 C 128.22656,257.9935 128.07031,258.42839 128.07031,258.98047 L 128.07031,264.01953 L 125.79688,264.01953 M 106.64844,284.01953 L 106.64844,272.51172 L 109.01563,272.51172 L 109.01563,277.23828 L 113.50781,272.51172 L 116.46875,272.51172 L 111.875,277.16797 L 116.88281,284.01953 L 113.99219,284.01953 L 110.24219,278.75391 L 109.01563,279.97266 L 109.01563,284.01953 L 106.64844,284.01953 M 122.9375,281.44141 L 125.20313,281.44141 C 124.97395,282.33724 124.51041,283.04037 123.8125,283.55078 C 123.11979,284.05599 122.27343,284.30859 121.27344,284.30859 C 120.04427,284.30859 119.07031,283.89714 118.35156,283.07422 C 117.63281,282.2461 117.27344,281.1263 117.27344,279.71484 C 117.27344,278.32422 117.6276,277.22787 118.33594,276.42578 C 119.04427,275.62371 120.01302,275.22267 121.24219,275.22266 C 122.54427,275.22267 123.54947,275.6185 124.25781,276.41016 C 124.96614,277.19662 125.3203,278.31902 125.32031,279.77734 C 125.3203,279.93881 125.3177,280.0612 125.3125,280.14453 C 125.31249,280.22266 125.30728,280.29818 125.29688,280.37109 L 119.625,280.37109 C 119.65625,281.03776 119.81771,281.54037 120.10938,281.87891 C 120.40625,282.21745 120.83073,282.38672 121.38281,282.38672 C 121.77343,282.38672 122.09374,282.3112 122.34375,282.16016 C 122.59374,282.00391 122.79166,281.76433 122.9375,281.44141 M 119.625,278.87891 L 122.96875,278.87891 C 122.94791,278.306 122.79426,277.8711 122.50781,277.57422 C 122.22656,277.27214 121.82031,277.1211 121.28906,277.12109 C 120.79427,277.1211 120.40364,277.27214 120.11719,277.57422 C 119.83593,277.87631 119.67187,278.3112 119.625,278.87891 M 127.16406,287.42578 L 127.16406,285.58984 C 127.23698,285.60026 127.3125,285.60807 127.39063,285.61328 C 127.46875,285.61849 127.57031,285.62109 127.69531,285.62109 C 128.14323,285.62109 128.47916,285.51432 128.70313,285.30078 C 128.92708,285.09245 129.03906,284.77734 129.03906,284.35547 C 129.03906,284.32422 129.03385,284.28516 129.02344,284.23828 C 129.01302,284.19141 129.0026,284.15234 128.99219,284.12109 L 125.92969,275.52734 L 128.42969,275.52734 L 130.21875,281.65234 L 131.96094,275.52734 L 134.35156,275.52734 L 130.85938,285.54297 C 130.59895,286.29297 130.27343,286.80338 129.88281,287.07422 C 129.49218,287.35026 128.90625,287.48828 128.125,287.48828 C 127.98437,287.48828 127.83333,287.48307 127.67188,287.47266 C 127.51041,287.46224 127.34114,287.44661 127.16406,287.42578" + id="text5872" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 708.94531,264.01953 L 705.64844,252.51172 L 708.10156,252.51172 L 710.07031,260.62891 L 711.73438,252.51172 L 714.25781,252.51172 L 715.92188,260.62891 L 717.89063,252.51172 L 720.32031,252.51172 L 717.03125,264.01953 L 714.77344,264.01953 L 712.99219,255.20703 L 711.20313,264.01953 L 708.94531,264.01953 M 721.5,254.58203 L 721.5,252.51172 L 723.77344,252.51172 L 723.77344,254.58203 L 721.5,254.58203 M 721.5,264.01953 L 721.5,255.52734 L 723.77344,255.52734 L 723.77344,264.01953 L 721.5,264.01953 M 725.79688,264.01953 L 725.79688,255.52734 L 728.02344,255.52734 L 728.02344,256.53516 C 728.34114,256.12371 728.71614,255.81641 729.14844,255.61328 C 729.58072,255.40496 730.06249,255.30079 730.59375,255.30078 C 731.53124,255.30079 732.23176,255.54558 732.69531,256.03516 C 733.16405,256.51954 733.39843,257.25131 733.39844,258.23047 L 733.39844,264.01953 L 731.125,264.01953 L 731.125,258.88672 C 731.12499,258.27735 731.02083,257.84245 730.8125,257.58203 C 730.60937,257.32162 730.27604,257.19141 729.8125,257.19141 C 729.27604,257.19141 728.85156,257.35287 728.53906,257.67578 C 728.22656,257.9935 728.07031,258.42839 728.07031,258.98047 L 728.07031,264.01953 L 725.79688,264.01953 M 706.64844,284.01953 L 706.64844,272.51172 L 709.01563,272.51172 L 709.01563,277.23828 L 713.50781,272.51172 L 716.46875,272.51172 L 711.875,277.16797 L 716.88281,284.01953 L 713.99219,284.01953 L 710.24219,278.75391 L 709.01563,279.97266 L 709.01563,284.01953 L 706.64844,284.01953 M 722.9375,281.44141 L 725.20313,281.44141 C 724.97395,282.33724 724.51041,283.04037 723.8125,283.55078 C 723.11979,284.05599 722.27343,284.30859 721.27344,284.30859 C 720.04427,284.30859 719.07031,283.89714 718.35156,283.07422 C 717.63281,282.2461 717.27344,281.1263 717.27344,279.71484 C 717.27344,278.32422 717.6276,277.22787 718.33594,276.42578 C 719.04427,275.62371 720.01302,275.22267 721.24219,275.22266 C 722.54427,275.22267 723.54947,275.6185 724.25781,276.41016 C 724.96614,277.19662 725.3203,278.31902 725.32031,279.77734 C 725.3203,279.93881 725.3177,280.0612 725.3125,280.14453 C 725.31249,280.22266 725.30728,280.29818 725.29688,280.37109 L 719.625,280.37109 C 719.65625,281.03776 719.81771,281.54037 720.10938,281.87891 C 720.40625,282.21745 720.83073,282.38672 721.38281,282.38672 C 721.77343,282.38672 722.09374,282.3112 722.34375,282.16016 C 722.59374,282.00391 722.79166,281.76433 722.9375,281.44141 M 719.625,278.87891 L 722.96875,278.87891 C 722.94791,278.306 722.79426,277.8711 722.50781,277.57422 C 722.22656,277.27214 721.82031,277.1211 721.28906,277.12109 C 720.79427,277.1211 720.40364,277.27214 720.11719,277.57422 C 719.83593,277.87631 719.67187,278.3112 719.625,278.87891 M 727.16406,287.42578 L 727.16406,285.58984 C 727.23698,285.60026 727.3125,285.60807 727.39063,285.61328 C 727.46875,285.61849 727.57031,285.62109 727.69531,285.62109 C 728.14323,285.62109 728.47916,285.51432 728.70313,285.30078 C 728.92708,285.09245 729.03906,284.77734 729.03906,284.35547 C 729.03906,284.32422 729.03385,284.28516 729.02344,284.23828 C 729.01302,284.19141 729.0026,284.15234 728.99219,284.12109 L 725.92969,275.52734 L 728.42969,275.52734 L 730.21875,281.65234 L 731.96094,275.52734 L 734.35156,275.52734 L 730.85938,285.54297 C 730.59895,286.29297 730.27343,286.80338 729.88281,287.07422 C 729.49218,287.35026 728.90625,287.48828 728.125,287.48828 C 727.98437,287.48828 727.83333,287.48307 727.67188,287.47266 C 727.51041,287.46224 727.34114,287.44661 727.16406,287.42578" + id="text5878" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 759.98438,275.60938 L 759.98438,264.10156 L 763.48438,264.10156 L 765.77344,272.85938 L 768.03125,264.10156 L 771.54688,264.10156 L 771.54688,275.60938 L 769.32813,275.60938 L 769.32813,266.32813 L 766.99219,275.60938 L 764.57031,275.60938 L 762.20313,266.32813 L 762.20313,275.60938 L 759.98438,275.60938 M 778.99219,273.03125 L 781.25781,273.03125 C 781.02864,273.92709 780.5651,274.63021 779.86719,275.14063 C 779.17447,275.64583 778.32812,275.89844 777.32813,275.89844 C 776.09896,275.89844 775.125,275.48698 774.40625,274.66406 C 773.6875,273.83594 773.32812,272.71615 773.32813,271.30469 C 773.32812,269.91407 773.68229,268.81772 774.39063,268.01563 C 775.09896,267.21355 776.06771,266.81251 777.29688,266.8125 C 778.59895,266.81251 779.60416,267.20834 780.3125,268 C 781.02083,268.78647 781.37499,269.90886 781.375,271.36719 C 781.37499,271.52865 781.37239,271.65105 781.36719,271.73438 C 781.36718,271.8125 781.36197,271.88802 781.35156,271.96094 L 775.67969,271.96094 C 775.71093,272.62761 775.87239,273.13021 776.16406,273.46875 C 776.46093,273.80729 776.88541,273.97656 777.4375,273.97656 C 777.82812,273.97656 778.14843,273.90104 778.39844,273.75 C 778.64843,273.59375 778.84635,273.35417 778.99219,273.03125 M 775.67969,270.46875 L 779.02344,270.46875 C 779.0026,269.89584 778.84895,269.46094 778.5625,269.16406 C 778.28124,268.86199 777.87499,268.71094 777.34375,268.71094 C 776.84895,268.71094 776.45833,268.86199 776.17188,269.16406 C 775.89062,269.46615 775.72656,269.90105 775.67969,270.46875 M 782.88281,275.60938 L 782.88281,267.11719 L 785.10938,267.11719 L 785.10938,268.125 C 785.42708,267.71355 785.80208,267.40626 786.23438,267.20313 C 786.66666,266.9948 787.14843,266.89063 787.67969,266.89063 C 788.61718,266.89063 789.3177,267.13543 789.78125,267.625 C 790.24999,268.10938 790.48437,268.84115 790.48438,269.82031 L 790.48438,275.60938 L 788.21094,275.60938 L 788.21094,270.47656 C 788.21093,269.86719 788.10676,269.4323 787.89844,269.17188 C 787.69531,268.91147 787.36197,268.78126 786.89844,268.78125 C 786.36197,268.78126 785.9375,268.94272 785.625,269.26563 C 785.3125,269.58334 785.15625,270.01823 785.15625,270.57031 L 785.15625,275.60938 L 782.88281,275.60938 M 800.01563,267.11719 L 800.01563,275.60938 L 797.78906,275.60938 L 797.78906,274.60156 C 797.46614,275.01302 797.08854,275.32292 796.65625,275.53125 C 796.22916,275.73437 795.74739,275.83594 795.21094,275.83594 C 794.27864,275.83594 793.57812,275.59115 793.10938,275.10156 C 792.64583,274.61198 792.41406,273.88021 792.41406,272.90625 L 792.41406,267.11719 L 794.6875,267.11719 L 794.6875,272.25 C 794.6875,272.85417 794.78906,273.28646 794.99219,273.54688 C 795.19531,273.80209 795.53125,273.92969 796,273.92969 C 796.53124,273.92969 796.95312,273.77084 797.26563,273.45313 C 797.58333,273.13021 797.74218,272.69271 797.74219,272.14063 L 797.74219,267.11719 L 800.01563,267.11719" + id="text5884" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 104.41406,17.103516 L 104.41406,10.212891 L 101.74219,10.212891 L 101.74219,8.7949219 L 101.94141,8.7949219 C 102.89453,8.7949367 103.58984,8.6621243 104.02734,8.3964844 C 104.47265,8.1308749 104.73828,7.6894691 104.82422,7.0722656 L 106.59375,7.0722656 L 106.59375,17.103516 L 104.41406,17.103516 M 106.72266,36.369141 L 106.72266,39.826172 L 103.24219,39.826172 L 103.24219,36.369141 L 106.72266,36.369141 M 105.89063,41.173828 L 106.80469,48.978516 L 106.80469,53.630859 L 103.19531,53.630859 L 103.19531,48.978516 L 104.10938,41.173828 L 105.89063,41.173828" + id="text5890" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 160.85156,47.103516 C 160.875,46.197273 161.08984,45.431649 161.49609,44.806641 C 161.91015,44.18165 162.63672,43.548838 163.67578,42.908203 C 163.82422,42.822276 164.03125,42.701183 164.29688,42.544922 C 165.74218,41.724621 166.46484,40.931653 166.46484,40.166016 C 166.46484,39.720717 166.32031,39.369155 166.03125,39.111328 C 165.74218,38.85353 165.34375,38.724624 164.83594,38.724609 C 164.27343,38.724624 163.83984,38.88478 163.53516,39.205078 C 163.23047,39.517592 163.07812,39.966811 163.07813,40.552734 L 163.07813,40.646484 L 161.03906,40.646484 C 161.03906,39.498061 161.37891,38.615249 162.05859,37.998047 C 162.73828,37.380876 163.71093,37.072282 164.97656,37.072266 C 166.11718,37.072282 167.02343,37.353532 167.69531,37.916016 C 168.37499,38.470718 168.71484,39.212905 168.71484,40.142578 C 168.71484,40.814466 168.53905,41.39259 168.1875,41.876953 C 167.83593,42.361339 167.14843,42.919933 166.125,43.552734 C 165.89843,43.701182 165.57812,43.896494 165.16406,44.138672 C 164.22656,44.685556 163.69922,45.115243 163.58203,45.427734 L 168.62109,45.427734 L 168.62109,47.103516 L 160.85156,47.103516" + id="text5910" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 220.92188,44.033203 L 223.05469,44.033203 C 223.07031,44.603525 223.22265,45.029305 223.51172,45.310547 C 223.80078,45.591805 224.23437,45.73243 224.8125,45.732422 C 225.36718,45.73243 225.79687,45.599617 226.10156,45.333984 C 226.40624,45.068368 226.55859,44.689462 226.55859,44.197266 C 226.55859,43.697276 226.38281,43.322276 226.03125,43.072266 C 225.67968,42.814464 225.15234,42.685558 224.44922,42.685547 L 224.10938,42.685547 L 224.10938,41.291016 L 224.35547,41.291016 C 225.0039,41.291028 225.48046,41.181653 225.78516,40.962891 C 226.09765,40.736341 226.2539,40.392591 226.25391,39.931641 C 226.2539,39.54103 226.12109,39.232436 225.85547,39.005859 C 225.58984,38.771499 225.23437,38.654312 224.78906,38.654297 C 224.29687,38.654312 223.91797,38.787124 223.65234,39.052734 C 223.38672,39.310561 223.2539,39.681655 223.25391,40.166016 L 223.25391,40.236328 L 221.16797,40.236328 C 221.19141,39.212905 221.51953,38.431656 222.15234,37.892578 C 222.79297,37.345719 223.70312,37.072282 224.88281,37.072266 C 225.99218,37.072282 226.86718,37.314469 227.50781,37.798828 C 228.15624,38.283218 228.48046,38.943374 228.48047,39.779297 C 228.48046,40.21681 228.36718,40.603529 228.14063,40.939453 C 227.92187,41.26759 227.59374,41.537121 227.15625,41.748047 C 227.72656,41.974621 228.15624,42.291027 228.44531,42.697266 C 228.74218,43.095714 228.89062,43.564463 228.89063,44.103516 C 228.89062,45.119149 228.52343,45.923836 227.78906,46.517578 C 227.06249,47.103522 226.07031,47.396491 224.8125,47.396484 C 223.57031,47.396491 222.60937,47.107428 221.92969,46.529297 C 221.25781,45.95118 220.92187,45.134774 220.92188,44.080078 L 220.92188,44.033203" + id="text5922" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 278.92969,21.685547 C 279.86719,21.037112 280.53125,20.439456 280.92188,19.892578 C 281.32031,19.345707 281.51953,18.75977 281.51953,18.134766 C 281.51953,17.837896 281.47265,17.525397 281.37891,17.197266 C 281.28515,16.861335 281.14843,16.509773 280.96875,16.142578 L 278.90625,16.142578 L 278.90625,14.841797 L 280.17188,14.841797 C 279.82812,14.162119 279.57812,13.556651 279.42188,13.025391 C 279.26562,12.494152 279.1875,11.998059 279.1875,11.537109 C 279.1875,10.146498 279.69531,9.021499 280.71094,8.1621094 C 281.73437,7.3027507 283.08203,6.8730636 284.75391,6.8730469 C 286.5664,6.8730636 287.98827,7.3379069 289.01953,8.2675781 C 290.05077,9.1972801 290.61327,10.517591 290.70703,12.228516 L 287.47266,12.228516 C 287.41015,11.345715 287.15624,10.669935 286.71094,10.201172 C 286.26562,9.7324358 285.65624,9.498061 284.88281,9.4980469 C 284.14843,9.498061 283.58203,9.6894671 283.18359,10.072266 C 282.79296,10.455091 282.59765,11.005872 282.59766,11.724609 C 282.59765,12.138683 282.84375,12.888683 283.33594,13.974609 C 283.50781,14.349619 283.63671,14.638681 283.72266,14.841797 L 287.0625,14.841797 L 287.0625,16.142578 L 284.20313,16.142578 C 284.27343,16.43946 284.32421,16.712898 284.35547,16.962891 C 284.38671,17.212897 284.40234,17.443366 284.40234,17.654297 C 284.40234,18.216802 284.22656,18.779302 283.875,19.341797 C 283.53124,19.896488 282.94531,20.548831 282.11719,21.298828 C 282.625,21.064456 283.08203,20.892581 283.48828,20.783203 C 283.90234,20.666019 284.27734,20.607425 284.61328,20.607422 C 285.01952,20.607425 285.57421,20.701175 286.27734,20.888672 C 286.98046,21.068362 287.48046,21.158206 287.77734,21.158203 C 288.16796,21.158206 288.55077,21.095706 288.92578,20.970703 C 289.30858,20.845706 289.68749,20.6543 290.0625,20.396484 L 291.09375,22.939453 C 290.4453,23.322266 289.82421,23.611328 289.23047,23.806641 C 288.63671,24.009765 288.08202,24.111328 287.56641,24.111328 C 286.97265,24.111328 286.16796,23.955078 285.15234,23.642578 C 284.14453,23.330078 283.41406,23.173829 282.96094,23.173828 C 282.48437,23.173829 282.01953,23.251954 281.56641,23.408203 C 281.12109,23.564453 280.6875,23.798828 280.26563,24.111328 L 278.92969,21.685547 M 284.94141,40.025391 C 284.05859,40.025404 283.29687,40.345716 282.65625,40.986328 C 282.01562,41.626965 281.69531,42.384777 281.69531,43.259766 C 281.69531,44.1504 282.01171,44.912118 282.64453,45.544922 C 283.27734,46.169929 284.04296,46.482429 284.94141,46.482422 C 285.82421,46.482429 286.58202,46.169929 287.21484,45.544922 C 287.85546,44.912118 288.17577,44.1504 288.17578,43.259766 C 288.17577,42.384777 287.85546,41.626965 287.21484,40.986328 C 286.58202,40.345716 285.82421,40.025404 284.94141,40.025391 M 279.65625,36.779297 L 282.05859,39.158203 C 282.48046,38.85353 282.92578,38.626968 283.39453,38.478516 C 283.86328,38.322281 284.37109,38.244156 284.91797,38.244141 C 285.46484,38.244156 285.97655,38.322281 286.45313,38.478516 C 286.93749,38.626968 287.39062,38.85353 287.8125,39.158203 L 290.19141,36.779297 L 291.42188,38.033203 L 289.04297,40.435547 C 289.33983,40.849622 289.56249,41.294934 289.71094,41.771484 C 289.85936,42.240246 289.93358,42.736339 289.93359,43.259766 C 289.93358,43.783213 289.85936,44.279306 289.71094,44.748047 C 289.56249,45.216805 289.33983,45.666024 289.04297,46.095703 L 291.42188,48.498047 L 290.19141,49.716797 L 287.8125,47.337891 C 287.39062,47.650397 286.9414,47.880865 286.46484,48.029297 C 285.98827,48.17774 285.48046,48.251959 284.94141,48.251953 C 284.3789,48.251959 283.85937,48.17774 283.38281,48.029297 C 282.91406,47.880865 282.47265,47.650397 282.05859,47.337891 L 279.65625,49.716797 L 278.4375,48.498047 L 280.80469,46.095703 C 280.50781,45.673836 280.28515,45.23243 280.13672,44.771484 C 279.99609,44.302744 279.92578,43.798838 279.92578,43.259766 C 279.92578,42.736339 279.99609,42.240246 280.13672,41.771484 C 280.28515,41.294934 280.50781,40.849622 280.80469,40.435547 L 278.4375,38.033203 L 279.65625,36.779297" + id="text5928" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 352.875,47.701172 C 352.74217,49.662113 351.98436,51.220706 350.60156,52.376953 C 349.22655,53.533203 347.42968,54.111328 345.21094,54.111328 C 342.65624,54.111328 340.66796,53.314453 339.24609,51.720703 C 337.83203,50.126957 337.125,47.892584 337.125,45.017578 C 337.125,42.08009 337.84765,39.830092 339.29297,38.267578 C 340.73828,36.705095 342.8164,35.923846 345.52734,35.923828 C 347.73046,35.923846 349.46874,36.462908 350.74219,37.541016 C 352.02342,38.611343 352.72655,40.126967 352.85156,42.087891 L 349.34766,42.087891 C 349.19921,41.111341 348.80077,40.369154 348.15234,39.861328 C 347.50389,39.345717 346.6289,39.087905 345.52734,39.087891 C 343.96484,39.087905 342.77734,39.591811 341.96484,40.599609 C 341.15234,41.607434 340.74609,43.080089 340.74609,45.017578 C 340.74609,46.892585 341.14843,48.341802 341.95313,49.365234 C 342.76562,50.388675 343.91796,50.900393 345.41016,50.900391 C 346.48827,50.900393 347.37108,50.626956 348.05859,50.080078 C 348.74608,49.525395 349.19139,48.732427 349.39453,47.701172 L 352.875,47.701172" + id="text5946" /> + <path + transform="matrix(1.16233,0,-0.444745,0.860341,0,0)" + style="font-size:16.72912407px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 307.52845,53.268758 L 317.31434,53.268758 L 317.31434,54.894293 L 307.52845,54.894293 L 307.52845,53.268758 M 307.52845,49.756296 L 317.31434,49.756296 L 317.31434,51.381831 L 307.52845,51.381831 L 307.52845,49.756296" + id="text5956" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 411.45117,50.150391 L 411.45117,46.142578 L 408.63867,50.150391 L 411.45117,50.150391 M 411.45117,53.630859 L 411.45117,51.591797 L 406.98633,51.591797 L 406.98633,49.962891 L 410.90039,44.513672 L 413.51367,44.513672 L 413.51367,50.103516 L 414.73242,50.103516 L 414.73242,51.591797 L 413.51367,51.591797 L 413.51367,53.630859 L 411.45117,53.630859 M 398.58398,54.111328 L 408.7793,36.615234 L 410.70117,36.615234 L 400.48242,54.111328 L 398.58398,54.111328 M 397.78711,46.458984 L 397.78711,40.025391 L 395.26758,40.025391 L 395.26758,38.701172 L 395.44336,38.701172 C 396.36523,38.701187 397.0332,38.576187 397.44727,38.326172 C 397.86914,38.076187 398.11914,37.658219 398.19727,37.072266 L 399.88477,37.072266 L 399.88477,46.458984 L 397.78711,46.458984" + id="text5960" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 467.0918,53.630859 C 467.11522,52.779298 467.32225,52.064455 467.71289,51.486328 C 468.11131,50.900393 468.80663,50.31055 469.79883,49.716797 C 469.95506,49.630863 470.16991,49.50977 470.44336,49.353516 C 471.7949,48.595708 472.47068,47.861334 472.4707,47.150391 C 472.47068,46.736335 472.33006,46.40821 472.04883,46.166016 C 471.76756,45.923836 471.38475,45.802742 470.90039,45.802734 C 470.36912,45.802742 469.95506,45.95118 469.6582,46.248047 C 469.36913,46.544929 469.22459,46.966804 469.22461,47.513672 L 469.22461,47.607422 L 467.2793,47.607422 C 467.27928,46.529304 467.6035,45.70118 468.25195,45.123047 C 468.90038,44.537118 469.82616,44.24415 471.0293,44.244141 C 472.12303,44.24415 472.99412,44.505868 473.64258,45.029297 C 474.29881,45.552742 474.62693,46.251961 474.62695,47.126953 C 474.62693,47.751959 474.45506,48.294927 474.11133,48.755859 C 473.77537,49.208989 473.11522,49.72852 472.13086,50.314453 C 471.9199,50.439456 471.63084,50.607425 471.26367,50.818359 C 470.34959,51.341799 469.83397,51.744143 469.7168,52.025391 L 474.50977,52.025391 L 474.50977,53.630859 L 467.0918,53.630859 M 458.68945,54.111328 L 468.88477,36.615234 L 470.80664,36.615234 L 460.58789,54.111328 L 458.68945,54.111328 M 457.89258,46.458984 L 457.89258,40.025391 L 455.37305,40.025391 L 455.37305,38.701172 L 455.54883,38.701172 C 456.4707,38.701187 457.13867,38.576187 457.55273,38.326172 C 457.97461,38.076187 458.22461,37.658219 458.30273,37.072266 L 459.99023,37.072266 L 459.99023,46.458984 L 457.89258,46.458984" + id="text5967" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 531.83203,50.150391 L 531.83203,46.142578 L 529.01953,50.150391 L 531.83203,50.150391 M 531.83203,53.630859 L 531.83203,51.591797 L 527.36719,51.591797 L 527.36719,49.962891 L 531.28125,44.513672 L 533.89453,44.513672 L 533.89453,50.103516 L 535.11328,50.103516 L 535.11328,51.591797 L 533.89453,51.591797 L 533.89453,53.630859 L 531.83203,53.630859 M 518.96484,54.111328 L 529.16016,36.615234 L 531.08203,36.615234 L 520.86328,54.111328 L 518.96484,54.111328 M 514.88672,43.599609 L 516.89063,43.599609 C 516.91406,44.130869 517.0625,44.529306 517.33594,44.794922 C 517.61718,45.052743 518.03125,45.181649 518.57813,45.181641 C 519.10937,45.181649 519.51953,45.060555 519.80859,44.818359 C 520.09765,44.568368 520.24218,44.208994 520.24219,43.740234 C 520.24218,43.271495 520.07421,42.919933 519.73828,42.685547 C 519.40234,42.443371 518.90625,42.322277 518.25,42.322266 C 518.20312,42.322277 518.14453,42.326183 518.07422,42.333984 C 518.0039,42.341808 517.94922,42.345714 517.91016,42.345703 L 517.91016,41.033203 L 518.14453,41.033203 C 518.76171,41.033216 519.21484,40.931653 519.50391,40.728516 C 519.80078,40.517591 519.94921,40.193373 519.94922,39.755859 C 519.94921,39.388686 519.82421,39.099624 519.57422,38.888672 C 519.32421,38.669937 518.98437,38.560562 518.55469,38.560547 C 518.08593,38.560562 517.72265,38.685562 517.46484,38.935547 C 517.21484,39.177749 517.08984,39.525405 517.08984,39.978516 L 517.08984,40.048828 L 515.08594,40.048828 C 515.10156,39.087905 515.41797,38.353531 516.03516,37.845703 C 516.65234,37.330094 517.52343,37.072282 518.64844,37.072266 C 519.70312,37.072282 520.53906,37.302751 521.15625,37.763672 C 521.77343,38.216812 522.08202,38.833999 522.08203,39.615234 C 522.08202,40.02931 521.97655,40.392591 521.76563,40.705078 C 521.55468,41.009778 521.23827,41.263684 520.81641,41.466797 C 521.36327,41.677746 521.77343,41.970715 522.04688,42.345703 C 522.32812,42.712902 522.46874,43.154307 522.46875,43.669922 C 522.46874,44.607431 522.11718,45.349618 521.41406,45.896484 C 520.71874,46.443367 519.77343,46.716804 518.57813,46.716797 C 517.39062,46.716804 516.47656,46.451179 515.83594,45.919922 C 515.20312,45.380868 514.88672,44.615243 514.88672,43.623047 L 514.88672,43.599609" + id="text5973" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 586.63477,39.404297 L 586.63477,42.498047 L 583.36523,42.498047 L 583.36523,39.474609 C 583.36523,38.482437 583.66992,37.654313 584.2793,36.990234 C 584.88867,36.326189 585.67382,35.970721 586.63477,35.923828 L 586.63477,37.119141 C 586.04101,37.259782 585.59961,37.509782 585.31055,37.869141 C 585.02148,38.220719 584.87695,38.681656 584.87695,39.251953 L 584.87695,39.404297 L 586.63477,39.404297" + id="text5979" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 643.36523,39.474609 L 643.36523,36.369141 L 646.63477,36.369141 L 646.63477,39.427734 C 646.63476,40.412123 646.33007,41.240247 645.7207,41.912109 C 645.11132,42.576183 644.32617,42.931651 643.36523,42.978516 L 643.36523,41.771484 C 643.95898,41.630871 644.39648,41.384778 644.67773,41.033203 C 644.96679,40.673841 645.11132,40.201185 645.11133,39.615234 L 645.11133,39.474609 L 643.36523,39.474609" + id="text5985" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 706.89258,53.630859 L 703.50586,53.630859 L 703.50586,47.560547 L 703.27148,47.150391 L 698.00977,47.150391 L 698.00977,45.826172 L 702.49805,45.826172 L 701.64258,44.337891 L 698.00977,44.337891 L 698.00977,43.025391 L 700.86914,43.025391 L 697.61133,37.330078 L 701.41992,37.330078 L 705.19336,44.724609 L 708.69727,37.330078 L 712.27148,37.330078 L 709.27148,43.025391 L 712.00195,43.025391 L 712.00195,44.337891 L 708.58008,44.337891 L 707.7832,45.826172 L 712.00195,45.826172 L 712.00195,47.150391 L 707.0918,47.150391 L 706.89258,47.560547 L 706.89258,53.630859" + id="text5991" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 764.97656,19.306641 C 765.46093,19.306645 765.8789,19.482426 766.23047,19.833984 C 766.58202,20.18555 766.7578,20.603519 766.75781,21.087891 C 766.7578,21.564455 766.58202,21.974611 766.23047,22.318359 C 765.8789,22.66211 765.46093,22.833985 764.97656,22.833984 C 764.48437,22.833985 764.06249,22.666017 763.71094,22.330078 C 763.36718,21.994142 763.1953,21.58008 763.19531,21.087891 C 763.1953,20.595706 763.36718,20.177738 763.71094,19.833984 C 764.06249,19.482426 764.48437,19.306645 764.97656,19.306641 M 757.94531,15.298828 L 771.98438,15.298828 L 771.98438,17.630859 L 757.94531,17.630859 L 757.94531,15.298828 M 764.97656,10.095703 C 765.46093,10.095717 765.8789,10.271498 766.23047,10.623047 C 766.58202,10.96681 766.7578,11.380872 766.75781,11.865234 C 766.7578,12.357433 766.58202,12.779308 766.23047,13.130859 C 765.88671,13.47462 765.46874,13.646494 764.97656,13.646484 C 764.48437,13.646494 764.06249,13.47462 763.71094,13.130859 C 763.36718,12.779308 763.1953,12.357433 763.19531,11.865234 C 763.1953,11.373059 763.36718,10.955091 763.71094,10.611328 C 764.06249,10.267591 764.48437,10.095717 764.97656,10.095703 M 759.84375,39.544922 L 765.11719,44.818359 L 770.40234,39.544922 L 772.05469,41.173828 L 766.78125,46.482422 L 772.05469,51.755859 L 770.40234,53.396484 L 765.11719,48.111328 L 759.84375,53.396484 L 758.20313,51.755859 L 763.48828,46.482422 L 758.20313,41.173828 L 759.84375,39.544922" + id="text5997" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 134.9707,69.826172 L 132.58008,77.173828 L 137.37305,77.173828 L 134.9707,69.826172 M 132.9082,66.369141 L 137.00977,66.369141 L 143.23242,83.630859 L 139.50586,83.630859 L 138.33398,80.080078 L 131.64258,80.080078 L 130.50586,83.630859 L 126.76758,83.630859 L 132.9082,66.369141 M 135.70898,64.166016 L 135.70898,61.283203 L 138.35742,61.283203 L 138.35742,64.166016 L 135.70898,64.166016 M 131.63086,64.166016 L 131.63086,61.283203 L 134.2793,61.283203 L 134.2793,64.166016 L 131.63086,64.166016" + id="text6003" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 194.9707,62.126953 C 194.5957,62.126975 194.27538,62.267599 194.00977,62.548828 C 193.74413,62.822286 193.61132,63.154317 193.61133,63.544922 C 193.61132,63.927754 193.74023,64.251973 193.99805,64.517578 C 194.26366,64.783222 194.58788,64.916034 194.9707,64.916016 C 195.36132,64.916034 195.69335,64.783222 195.9668,64.517578 C 196.24804,64.24416 196.38866,63.919942 196.38867,63.544922 C 196.38866,63.16213 196.24804,62.830099 195.9668,62.548828 C 195.69335,62.267599 195.36132,62.126975 194.9707,62.126953 M 194.9707,60.521484 C 195.81444,60.521507 196.52929,60.814476 197.11523,61.400391 C 197.70116,61.978537 197.99413,62.685568 197.99414,63.521484 C 197.99413,64.357441 197.70116,65.068378 197.11523,65.654297 C 196.52929,66.232439 195.81444,66.521501 194.9707,66.521484 C 194.13476,66.521501 193.42773,66.232439 192.84961,65.654297 C 192.27929,65.07619 191.99414,64.365254 191.99414,63.521484 C 191.99414,62.677755 192.27929,61.966819 192.84961,61.388672 C 193.42773,60.81057 194.13476,60.521507 194.9707,60.521484 M 192.7207,67.072266 L 197.23242,67.072266 L 203.23242,83.630859 L 199.50586,83.630859 L 198.33398,80.080078 L 191.64258,80.080078 L 190.50586,83.630859 L 186.76758,83.630859 L 192.7207,67.072266 M 194.9707,69.826172 L 192.58008,77.173828 L 197.37305,77.173828 L 194.9707,69.826172" + id="text6007" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 248.52539,83.630859 L 248.52539,66.369141 L 261.05273,66.369141 L 261.05273,69.369141 L 252.0293,69.369141 L 252.0293,73.048828 L 260.2793,73.048828 L 260.2793,76.001953 L 252.0293,76.001953 L 252.0293,80.443359 L 261.47461,80.443359 L 261.47461,83.630859 L 248.52539,83.630859 M 258.24023,60.521484 L 254.57227,64.857422 L 252.9082,64.857422 L 255.2168,60.521484 L 258.24023,60.521484" + id="text6011" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 313.72266,101.49056 L 313.72266,104.29134 L 314.88281,104.29134 C 315.5703,104.29135 316.07421,104.18198 316.39453,103.96322 C 316.71483,103.74448 316.87499,103.40073 316.875,102.93197 C 316.87499,102.43979 316.70311,102.07651 316.35938,101.84212 C 316.01561,101.60776 315.48436,101.49057 314.76563,101.49056 L 313.72266,101.49056 M 311.37891,100.00228 L 315.16406,100.00228 C 316.53905,100.00229 317.5703,100.23667 318.25781,100.70541 C 318.95311,101.16636 319.30077,101.85776 319.30078,102.77962 C 319.30077,103.42026 319.11327,103.96713 318.73828,104.42025 C 318.36327,104.87338 317.84374,105.18198 317.17969,105.34603 L 319.34766,109.67025 L 316.72266,109.67025 L 314.88281,105.70931 L 313.72266,105.70931 L 313.72266,109.67025 L 311.37891,109.67025 L 311.37891,100.00228 M 315,97.717125 C 314.0078,97.717141 313.08593,97.892922 312.23438,98.244469 C 311.38281,98.588234 310.61718,99.099952 309.9375,99.779625 C 309.22656,100.49058 308.67968,101.29917 308.29688,102.20541 C 307.91406,103.10385 307.72265,104.03354 307.72266,104.99447 C 307.72265,105.96323 307.90234,106.8851 308.26172,107.76009 C 308.62109,108.62729 309.14062,109.40072 309.82031,110.08041 C 310.51562,110.79135 311.30859,111.33822 312.19922,111.72103 C 313.08984,112.09603 314.01562,112.28353 314.97656,112.28353 C 315.91405,112.28353 316.82421,112.09994 317.70703,111.73275 C 318.59764,111.36556 319.40624,110.83822 320.13281,110.15072 C 320.81248,109.49447 321.33983,108.72885 321.71484,107.85384 C 322.08983,106.97885 322.27733,106.0726 322.27734,105.13509 C 322.27733,104.09604 322.10155,103.13901 321.75,102.264 C 321.40623,101.38901 320.89061,100.60386 320.20313,99.908531 C 319.49999,99.181983 318.70702,98.635109 317.82422,98.267906 C 316.94921,97.900734 316.0078,97.717141 315,97.717125 M 314.97656,96.275719 C 316.17968,96.275736 317.31249,96.502298 318.375,96.955406 C 319.4453,97.400735 320.39842,98.049172 321.23438,98.900719 C 322.03905,99.713233 322.65233,100.64292 323.07422,101.68978 C 323.49608,102.73667 323.70701,103.84604 323.70703,105.01791 C 323.70701,106.20541 323.48826,107.33041 323.05078,108.39291 C 322.61326,109.4476 321.97655,110.37728 321.14063,111.18197 C 320.30467,112.00228 319.35155,112.63119 318.28125,113.06869 C 317.21874,113.50619 316.11718,113.72494 314.97656,113.72494 C 313.81249,113.72494 312.69921,113.49838 311.63672,113.04525 C 310.57421,112.59213 309.625,111.93978 308.78906,111.08822 C 307.97656,110.26791 307.35547,109.33822 306.92578,108.29916 C 306.5039,107.25229 306.29297,106.15854 306.29297,105.01791 C 306.29297,104.22104 306.39844,103.4476 306.60938,102.69759 C 306.82031,101.93979 307.13672,101.20151 307.55859,100.48275 C 308.34765,99.154639 309.39062,98.12339 310.6875,97.389 C 311.98437,96.646829 313.41405,96.275736 314.97656,96.275719" + id="text6015" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 372.0293,69.064453 L 376.06055,69.064453 C 377.84179,69.064468 379.18944,69.505874 380.10352,70.388672 C 381.01756,71.263684 381.47459,72.556652 381.47461,74.267578 C 381.47459,75.939461 381.02538,77.228522 380.12695,78.134766 C 379.23632,79.033208 377.95897,79.482426 376.29492,79.482422 L 372.0293,79.482422 L 372.0293,83.630859 L 368.52539,83.630859 L 368.52539,66.369141 L 372.0293,66.369141 L 372.0293,69.064453 M 372.05273,76.599609 L 375.47461,76.599609 C 376.4121,76.599616 377.09179,76.416023 377.51367,76.048828 C 377.93554,75.673836 378.14647,75.080087 378.14648,74.267578 C 378.14647,73.509776 377.93554,72.939464 377.51367,72.556641 C 377.09179,72.166027 376.47069,71.970715 375.65039,71.970703 L 372.05273,71.970703 L 372.05273,76.599609" + id="text6019" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 428.08594,66.322266 L 431.67188,66.322266 L 431.67188,77.150391 C 431.67187,78.486333 431.93749,79.462895 432.46875,80.080078 C 432.99999,80.689456 433.84374,80.994143 435,80.994141 C 436.17187,80.994143 437.02343,80.689456 437.55469,80.080078 C 438.09374,79.470707 438.36327,78.494146 438.36328,77.150391 L 438.36328,66.322266 L 441.91406,66.322266 L 441.91406,77.537109 C 441.91405,79.654301 441.3203,81.279299 440.13281,82.412109 C 438.95311,83.544922 437.24999,84.111328 435.02344,84.111328 C 432.78124,84.111328 431.0625,83.548828 429.86719,82.423828 C 428.67969,81.291018 428.08594,79.662113 428.08594,77.537109 L 428.08594,66.322266 M 435.73828,64.166016 L 435.73828,61.283203 L 438.38672,61.283203 L 438.38672,64.166016 L 435.73828,64.166016 M 431.66016,64.166016 L 431.66016,61.283203 L 434.30859,61.283203 L 434.30859,64.166016 L 431.66016,64.166016" + id="text6023" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 488.08594,66.105469 L 491.67188,66.105469 L 491.67188,76.933594 C 491.67187,78.269536 491.93749,79.246098 492.46875,79.863281 C 492.99999,80.472659 493.84374,80.777346 495,80.777344 C 496.17187,80.777346 497.02343,80.472659 497.55469,79.863281 C 498.09374,79.25391 498.36327,78.277349 498.36328,76.933594 L 498.36328,66.105469 L 501.91406,66.105469 L 501.91406,77.320313 C 501.91405,79.437504 501.3203,81.062502 500.13281,82.195313 C 498.95311,83.328125 497.24999,83.894531 495.02344,83.894531 C 492.78124,83.894531 491.0625,83.332031 489.86719,82.207031 C 488.67969,81.074221 488.08594,79.445316 488.08594,77.320313 L 488.08594,66.105469 M 498.45703,60.304688 L 494.78906,64.640625 L 493.125,64.640625 L 495.43359,60.304688 L 498.45703,60.304688" + id="text6029" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 552.43945,83.630859 L 552.43945,66.369141 L 555.99023,66.369141 L 555.99023,83.630859 L 552.43945,83.630859 M 557.66602,60.521484 L 553.99805,64.857422 L 552.33398,64.857422 L 554.64258,60.521484 L 557.66602,60.521484" + id="text6033" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 610.18359,75 C 610.18359,76.898444 610.60546,78.375005 611.44922,79.429688 C 612.29296,80.476566 613.47265,81.000003 614.98828,81 C 616.51952,81.000003 617.71093,80.476566 618.5625,79.429688 C 619.41405,78.375005 619.83983,76.898444 619.83984,75 C 619.83983,73.101573 619.41405,71.628918 618.5625,70.582031 C 617.71093,69.527358 616.51952,69.000015 614.98828,69 C 613.47265,69.000015 612.29296,69.523452 611.44922,70.570313 C 610.60546,71.617199 610.18359,73.093761 610.18359,75 M 606.5625,75 C 606.5625,72.210949 607.32031,70.000014 608.83594,68.367188 C 610.35937,66.726579 612.41015,65.906268 614.98828,65.90625 C 617.56639,65.906268 619.61717,66.726579 621.14063,68.367188 C 622.67186,70.007826 623.43748,72.218761 623.4375,75 C 623.43748,77.781256 622.67186,79.992191 621.14063,81.632813 C 619.61717,83.273438 617.56639,84.09375 614.98828,84.09375 C 612.41015,84.09375 610.35937,83.273438 608.83594,81.632813 C 607.32031,79.992191 606.5625,77.781256 606.5625,75 M 618.44531,60.503906 L 614.77734,64.839844 L 613.11328,64.839844 L 615.42188,60.503906 L 618.44531,60.503906" + id="text6037" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 670.18359,75.017578 C 670.18359,76.916022 670.60546,78.392583 671.44922,79.447266 C 672.29296,80.494144 673.47265,81.017581 674.98828,81.017578 C 676.51952,81.017581 677.71093,80.494144 678.5625,79.447266 C 679.41405,78.392583 679.83983,76.916022 679.83984,75.017578 C 679.83983,73.119151 679.41405,71.646496 678.5625,70.599609 C 677.71093,69.544936 676.51952,69.017593 674.98828,69.017578 C 673.47265,69.017593 672.29296,69.54103 671.44922,70.587891 C 670.60546,71.634778 670.18359,73.111339 670.18359,75.017578 M 666.5625,75.017578 C 666.5625,72.228527 667.32031,70.017592 668.83594,68.384766 C 670.35937,66.744158 672.41015,65.923846 674.98828,65.923828 C 677.56639,65.923846 679.61717,66.744158 681.14063,68.384766 C 682.67186,70.025404 683.43748,72.23634 683.4375,75.017578 C 683.43748,77.798834 682.67186,80.009769 681.14063,81.650391 C 679.61717,83.291016 677.56639,84.111328 674.98828,84.111328 C 672.41015,84.111328 670.35937,83.291016 668.83594,81.650391 C 667.32031,80.009769 666.5625,77.798834 666.5625,75.017578 M 675.72656,64.166016 L 675.72656,61.283203 L 678.375,61.283203 L 678.375,64.166016 L 675.72656,64.166016 M 671.64844,64.166016 L 671.64844,61.283203 L 674.29688,61.283203 L 674.29688,64.166016 L 671.64844,64.166016" + id="text6041" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 735.5332,106.35352 L 735.5332,103.35352 L 739.44727,99.966797 L 739.44727,102.75586 L 737.04492,104.8418 L 739.44727,106.92773 L 739.44727,109.74023 L 735.5332,106.35352 M 730.4707,106.35352 L 730.4707,103.35352 L 734.4082,99.966797 L 734.4082,102.75586 L 732.00586,104.8418 L 734.4082,106.92773 L 734.4082,109.74023 L 730.4707,106.35352" + id="text6045" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 799.44727,103.3418 L 799.44727,106.3418 L 795.5332,109.72852 L 795.5332,106.93945 L 797.93555,104.83008 L 795.5332,102.76758 L 795.5332,99.955078 L 799.44727,103.3418 M 794.4082,103.3418 L 794.4082,106.3418 L 790.4707,109.72852 L 790.4707,106.93945 L 792.86133,104.83008 L 790.4707,102.76758 L 790.4707,99.955078 L 794.4082,103.3418" + id="text6051" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 883.81641,76.535881 L 886.23047,76.535881 L 886.23047,85.418694 L 883.81641,85.418694 L 883.81641,76.535881 M 883.81641,64.535881 L 886.23047,64.535881 L 886.23047,73.418694 L 883.81641,73.418694 L 883.81641,64.535881 M 877.98047,101.19213 L 892.01953,101.19213 L 892.01953,107.07494 L 889.6875,107.07494 L 889.6875,103.48901 L 877.98047,103.48901 L 877.98047,101.19213" + id="text6057" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 149.9707,129.82617 L 147.58008,137.17383 L 152.37305,137.17383 L 149.9707,129.82617 M 147.9082,126.36914 L 152.00977,126.36914 L 158.23242,143.63086 L 154.50586,143.63086 L 153.33398,140.08008 L 146.64258,140.08008 L 145.50586,143.63086 L 141.76758,143.63086 L 147.9082,126.36914 M 153.42773,120.52148 L 149.75977,124.85742 L 148.0957,124.85742 L 150.4043,120.52148 L 153.42773,120.52148" + id="text6065" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 211.40625,137.91797 C 211.71874,137.73829 211.95312,137.53907 212.10938,137.32031 C 212.26562,137.10157 212.34374,136.86719 212.34375,136.61719 C 212.34374,136.31251 212.2539,136.0547 212.07422,135.84375 C 211.89452,135.62501 211.52343,135.3711 210.96094,135.08203 L 207.85547,133.47656 C 207.55078,133.65626 207.3164,133.85938 207.15234,134.08594 C 206.99609,134.31251 206.91797,134.5547 206.91797,134.8125 C 206.91797,135.1172 207.03125,135.38673 207.25781,135.62109 C 207.49218,135.84766 208.0039,136.16407 208.79297,136.57031 L 211.40625,137.91797 M 205.03125,141.75 L 207.92578,141.75 C 207.98828,142.35938 208.16796,142.8125 208.46484,143.10938 C 208.76953,143.40625 209.19921,143.55469 209.75391,143.55469 C 210.26952,143.55469 210.67968,143.43359 210.98438,143.19141 C 211.28905,142.94141 211.4414,142.60547 211.44141,142.18359 C 211.4414,141.83985 211.32812,141.54297 211.10156,141.29297 C 210.87499,141.03516 210.42577,140.74219 209.75391,140.41406 L 206.95313,138.99609 C 206.0625,138.55079 205.39844,138.03907 204.96094,137.46094 C 204.52344,136.88282 204.30469,136.23438 204.30469,135.51563 C 204.30469,134.82032 204.47266,134.21095 204.80859,133.6875 C 205.15234,133.15626 205.65625,132.71485 206.32031,132.36328 C 205.92969,132.01173 205.64062,131.62892 205.45313,131.21484 C 205.26562,130.79298 205.17187,130.32814 205.17188,129.82031 C 205.17187,128.64845 205.57422,127.70705 206.37891,126.99609 C 207.18359,126.27736 208.2539,125.91799 209.58984,125.91797 C 210.96484,125.91799 212.04296,126.26955 212.82422,126.97266 C 213.60546,127.6758 214.0078,128.64845 214.03125,129.89063 L 211.26563,129.89063 C 211.24999,129.3672 211.09374,128.96876 210.79688,128.69531 C 210.50781,128.42189 210.08984,128.28517 209.54297,128.28516 C 209.05859,128.28517 208.68359,128.39064 208.41797,128.60156 C 208.16015,128.81251 208.03125,129.10939 208.03125,129.49219 C 208.03125,129.8047 208.18359,130.09767 208.48828,130.37109 C 208.80078,130.63673 209.35937,130.95704 210.16406,131.33203 L 212.13281,132.24609 C 213.1328,132.72267 213.87108,133.25392 214.34766,133.83984 C 214.82421,134.41798 215.06249,135.08595 215.0625,135.84375 C 215.06249,136.55469 214.8828,137.17579 214.52344,137.70703 C 214.17186,138.23047 213.66405,138.63672 213,138.92578 C 213.45312,139.32422 213.79296,139.76563 214.01953,140.25 C 214.24608,140.73438 214.35936,141.26563 214.35938,141.84375 C 214.35936,143.04688 213.92968,144.03906 213.07031,144.82031 C 212.21093,145.60937 211.10546,146.0039 209.75391,146.00391 C 208.26953,146.0039 207.1289,145.64453 206.33203,144.92578 C 205.53515,144.20703 205.10156,143.14844 205.03125,141.75 M 203.97656,173.625 L 203.97656,160.59375 C 203.97656,159.29689 204.48047,158.25002 205.48828,157.45313 C 206.49609,156.64845 207.83984,156.24611 209.51953,156.24609 C 211.23046,156.24611 212.5703,156.63674 213.53906,157.41797 C 214.5078,158.19923 214.99217,159.27345 214.99219,160.64063 C 214.99217,161.48439 214.84764,162.17579 214.55859,162.71484 C 214.27733,163.25392 213.83983,163.66798 213.24609,163.95703 C 214.16796,164.32423 214.85936,164.86329 215.32031,165.57422 C 215.78905,166.28516 216.02342,167.16016 216.02344,168.19922 C 216.02342,169.94922 215.51952,171.36328 214.51172,172.44141 C 213.5039,173.51953 212.18358,174.05859 210.55078,174.05859 C 210.32421,174.05859 210.0703,174.04687 209.78906,174.02344 C 209.51562,174 209.21874,173.96484 208.89844,173.91797 L 208.89844,171.17578 C 208.99999,171.19141 209.10156,171.20313 209.20313,171.21094 C 209.31249,171.21875 209.47265,171.22266 209.68359,171.22266 C 210.60546,171.22266 211.3164,170.96875 211.81641,170.46094 C 212.3164,169.94532 212.5664,169.21485 212.56641,168.26953 C 212.5664,167.35548 212.29296,166.66016 211.74609,166.18359 C 211.20702,165.70704 210.41796,165.46876 209.37891,165.46875 L 209.0625,165.46875 L 209.07422,163.06641 C 209.12109,163.07423 209.17187,163.08204 209.22656,163.08984 C 209.28124,163.08985 209.36327,163.08985 209.47266,163.08984 C 210.16796,163.08985 210.6953,162.91798 211.05469,162.57422 C 211.42187,162.22267 211.60546,161.71486 211.60547,161.05078 C 211.60546,160.38673 211.41405,159.88283 211.03125,159.53906 C 210.65624,159.18751 210.10546,159.01173 209.37891,159.01172 C 208.70703,159.01173 208.19531,159.20705 207.84375,159.59766 C 207.49218,159.98048 207.3164,160.54298 207.31641,161.28516 L 207.31641,173.625 L 203.97656,173.625" + id="text6073" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 267.09961,140.51367 L 269.94727,140.51367 C 271.60351,140.51367 272.80272,140.08008 273.54492,139.21289 C 274.2871,138.34571 274.65819,136.94727 274.6582,135.01758 C 274.65819,133.09571 274.31053,131.68165 273.61523,130.77539 C 272.92772,129.86134 271.8496,129.40431 270.38086,129.4043 L 267.09961,129.4043 L 267.09961,133.23633 L 270.88477,133.23633 L 270.88477,135.47461 L 267.09961,135.47461 L 267.09961,140.51367 M 263.61914,143.63086 L 263.61914,135.47461 L 261.74414,135.47461 L 261.74414,133.23633 L 263.61914,133.23633 L 263.61914,126.36914 L 270.4043,126.36914 C 273.04491,126.36916 275.01366,127.084 276.31055,128.51367 C 277.60741,129.93556 278.25584,132.10353 278.25586,135.01758 C 278.25584,136.60352 278.01756,137.99805 277.54102,139.20117 C 277.07225,140.4043 276.38084,141.36914 275.4668,142.0957 C 274.77928,142.64258 273.99413,143.03711 273.11133,143.2793 C 272.23632,143.51367 271.00585,143.63086 269.41992,143.63086 L 263.61914,143.63086" + id="text6077" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 626.72461,139.55273 C 627.17773,140.04493 627.68945,140.41211 628.25977,140.6543 C 628.83007,140.89649 629.47069,141.01758 630.18164,141.01758 C 631.71288,141.01758 632.90428,140.49414 633.75586,139.44727 C 634.60741,138.39258 635.03319,136.91602 635.0332,135.01758 C 635.03319,134.24415 634.96288,133.54493 634.82227,132.91992 C 634.68163,132.28712 634.4785,131.73634 634.21289,131.26758 L 626.72461,139.55273 M 625.98633,138.36914 L 633.39258,130.21289 C 632.9785,129.81447 632.50585,129.51759 631.97461,129.32227 C 631.44335,129.11916 630.84569,129.01759 630.18164,129.01758 C 628.66601,129.01759 627.48632,129.54103 626.64258,130.58789 C 625.79882,131.63478 625.37695,133.11134 625.37695,135.01758 C 625.37695,135.72071 625.42382,136.34571 625.51758,136.89258 C 625.61914,137.43946 625.77539,137.93165 625.98633,138.36914 M 621.36914,143.36133 L 623.51367,140.9707 C 622.91992,140.16602 622.47851,139.27149 622.18945,138.28711 C 621.90039,137.29493 621.75586,136.20509 621.75586,135.01758 C 621.75586,132.22853 622.51367,130.01759 624.0293,128.38477 C 625.55273,126.74416 627.60351,125.92385 630.18164,125.92383 C 631.28319,125.92385 632.27147,126.06447 633.14648,126.3457 C 634.02928,126.62697 634.84178,127.06056 635.58398,127.64648 L 637.30664,125.70117 L 638.45508,126.73242 L 636.63867,128.70117 C 637.30272,129.5215 637.79881,130.45509 638.12695,131.50195 C 638.46287,132.54884 638.63084,133.72071 638.63086,135.01758 C 638.63084,137.79883 637.86912,140.00977 636.3457,141.65039 C 634.82225,143.29102 632.76757,144.11133 630.18164,144.11133 C 629.01757,144.11133 627.96679,143.94727 627.0293,143.61914 C 626.0996,143.29102 625.26367,142.79102 624.52148,142.11914 L 622.50586,144.4043 L 621.36914,143.36133" + id="text6081" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 690,127.98633 C 689.42968,127.98634 688.9414,128.18556 688.53516,128.58398 C 688.13672,128.98244 687.9375,129.4629 687.9375,130.02539 C 687.9375,130.60353 688.13672,131.09181 688.53516,131.49023 C 688.93359,131.88868 689.42187,132.0879 690,132.08789 C 690.5625,132.0879 691.04296,131.88478 691.44141,131.47852 C 691.83984,131.07228 692.03906,130.5879 692.03906,130.02539 C 692.03906,129.4629 691.83984,128.98244 691.44141,128.58398 C 691.04296,128.18556 690.5625,127.98634 690,127.98633 M 690,126.47461 C 690.98437,126.47463 691.82031,126.82619 692.50781,127.5293 C 693.20312,128.22462 693.55077,129.06447 693.55078,130.04883 C 693.55077,131.0254 693.20312,131.86134 692.50781,132.55664 C 691.81249,133.25196 690.96875,133.59962 689.97656,133.59961 C 688.99218,133.59962 688.15625,133.25587 687.46875,132.56836 C 686.78906,131.88087 686.44922,131.04103 686.44922,130.04883 C 686.44922,129.05666 686.79297,128.21291 687.48047,127.51758 C 688.17578,126.82228 689.01562,126.47463 690,126.47461 M 695.51953,156.29883 L 695.51953,157.59961 L 694.19531,157.59961 L 694.19531,173.63086 L 692.42578,173.63086 L 692.42578,157.59961 L 690.57422,157.59961 L 690.57422,173.63086 L 688.78125,173.63086 L 688.78125,164.44336 C 687.47656,164.39649 686.43359,164.00196 685.65234,163.25977 C 684.87109,162.51759 684.48047,161.56056 684.48047,160.38867 C 684.48047,159.15431 684.89844,158.16603 685.73438,157.42383 C 686.57031,156.67385 687.67968,156.29885 689.0625,156.29883 L 695.51953,156.29883" + id="text6085" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 373.13672,6.5214844 L 376.08984,6.5214844 L 381.72656,13.095703 L 378.97266,13.095703 L 374.625,8.7480469 L 370.25391,13.095703 L 367.5,13.095703 L 373.13672,6.5214844" + id="text6091" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 750.67969,128.67773 L 750.67969,125.79492 L 753.32813,125.79492 L 753.32813,128.67773 L 750.67969,128.67773 M 746.60156,128.67773 L 746.60156,125.79492 L 749.25,125.79492 L 749.25,128.67773 L 746.60156,128.67773 M 753.39844,155.0332 L 749.73047,159.36914 L 748.06641,159.36914 L 750.375,155.0332 L 753.39844,155.0332" + id="text6099" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 171.07031,197.29102 L 175.92188,197.29102 L 175.92188,189.29883 L 173.97656,189.29883 L 171.07031,197.29102 M 165,203.63086 L 171.80859,186.36914 L 187.81641,186.36914 L 187.81641,189.36914 L 179.34375,189.36914 L 179.34375,193.04883 L 187.05469,193.04883 L 187.05469,196.00195 L 179.34375,196.00195 L 179.34375,200.44336 L 188.25,200.44336 L 188.25,203.63086 L 175.92188,203.63086 L 175.92188,200.08008 L 170.0625,200.08008 L 168.76172,203.63086 L 165,203.63086" + id="text6105" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 300.46875,193.23633 C 300.32031,193.22071 300.20312,193.20899 300.11719,193.20117 C 300.03906,193.19337 299.96484,193.18946 299.89453,193.18945 C 299.05859,193.18946 298.42578,193.53321 297.99609,194.2207 C 297.5664,194.90821 297.35156,195.92384 297.35156,197.26758 C 297.35156,198.04102 297.4375,198.70899 297.60938,199.27148 C 297.78906,199.83399 298.04687,200.28711 298.38281,200.63086 L 300.46875,193.23633 M 296.68359,206.49023 L 297.48047,203.63086 C 296.30859,203.13867 295.42187,202.35352 294.82031,201.27539 C 294.21875,200.19727 293.91797,198.85352 293.91797,197.24414 C 293.91797,195.11134 294.45312,193.43946 295.52344,192.22852 C 296.60156,191.01759 298.07421,190.41212 299.94141,190.41211 C 300.15234,190.41212 300.35937,190.41994 300.5625,190.43555 C 300.76562,190.45119 300.96874,190.47462 301.17188,190.50586 L 301.69922,188.56055 L 302.97656,188.56055 L 302.34375,190.78711 C 303.32811,191.09181 304.09765,191.63478 304.65234,192.41602 C 305.20702,193.18946 305.52733,194.17774 305.61328,195.38086 L 302.32031,195.36914 C 302.28124,194.98634 302.1914,194.65821 302.05078,194.38477 C 301.91796,194.10353 301.72265,193.85743 301.46484,193.64648 L 299.36719,201.13477 C 299.38281,201.13477 299.40624,201.13867 299.4375,201.14648 C 299.67187,201.16992 299.85156,201.18164 299.97656,201.18164 C 300.66406,201.18164 301.19921,200.99024 301.58203,200.60742 C 301.97265,200.22461 302.23437,199.62305 302.36719,198.80273 L 305.66016,198.80273 C 305.54296,200.41993 304.96874,201.70117 303.9375,202.64648 C 302.91405,203.5918 301.59374,204.06445 299.97656,204.06445 C 299.76562,204.06445 299.55077,204.05664 299.33203,204.04102 C 299.11328,204.02539 298.88671,204.00195 298.65234,203.9707 L 297.96094,206.49023 L 296.68359,206.49023 M 304.19531,223.0957 L 301.99219,223.0957 C 301.92968,222.54884 301.72264,222.12696 301.37109,221.83008 C 301.01952,221.5254 300.55468,221.37306 299.97656,221.37305 C 299.26562,221.37306 298.70702,221.69337 298.30078,222.33398 C 297.89452,222.96681 297.6914,223.85353 297.69141,224.99414 C 297.6914,226.14259 297.89452,227.01758 298.30078,227.61914 C 298.70702,228.22071 299.29687,228.52149 300.07031,228.52148 C 300.64061,228.52149 301.09765,228.35743 301.44141,228.0293 C 301.78514,227.70118 301.99218,227.23633 302.0625,226.63477 L 304.32422,226.62305 C 304.2617,227.70899 303.83592,228.58008 303.04688,229.23633 C 302.2578,229.89258 301.24218,230.22071 300,230.2207 C 298.54687,230.22071 297.39843,229.75977 296.55469,228.83789 C 295.71874,227.91602 295.30078,226.65821 295.30078,225.06445 C 295.30078,223.45509 295.72656,222.17384 296.57813,221.2207 C 297.43749,220.25978 298.58593,219.77931 300.02344,219.7793 C 301.21093,219.77931 302.18749,220.084 302.95313,220.69336 C 303.72655,221.30275 304.14061,222.10353 304.19531,223.0957 M 300,217.7168 C 298.99999,217.71681 298.06249,217.8965 297.1875,218.25586 C 296.32031,218.61525 295.54687,219.13869 294.86719,219.82617 C 294.17187,220.52931 293.64062,221.32618 293.27344,222.2168 C 292.90625,223.09962 292.72265,224.0254 292.72266,224.99414 C 292.72265,225.97071 292.90625,226.89649 293.27344,227.77148 C 293.64062,228.64649 294.17187,229.43164 294.86719,230.12695 C 295.55468,230.81446 296.33984,231.3418 297.22266,231.70898 C 298.10546,232.07617 299.03124,232.25977 300,232.25977 C 300.96874,232.25977 301.89452,232.07617 302.77734,231.70898 C 303.66796,231.3418 304.46874,230.80664 305.17969,230.10352 C 305.86717,229.43164 306.3867,228.66211 306.73828,227.79492 C 307.09764,226.92774 307.27733,225.99415 307.27734,224.99414 C 307.27733,224.00978 307.09373,223.08009 306.72656,222.20508 C 306.36717,221.32228 305.84373,220.53712 305.15625,219.84961 C 304.46092,219.15431 303.67577,218.62697 302.80078,218.26758 C 301.92577,217.90041 300.99218,217.71681 300,217.7168 M 299.97656,216.27539 C 301.16405,216.27541 302.28514,216.49416 303.33984,216.93164 C 304.40233,217.36916 305.35155,218.00587 306.1875,218.8418 C 307.0078,219.66212 307.63279,220.60353 308.0625,221.66602 C 308.49217,222.72071 308.70701,223.8379 308.70703,225.01758 C 308.70701,226.20509 308.49217,227.31446 308.0625,228.3457 C 307.64061,229.37696 307.01561,230.29883 306.1875,231.11133 C 305.3203,231.95508 304.35155,232.60352 303.28125,233.05664 C 302.21093,233.50195 301.10936,233.72461 299.97656,233.72461 C 298.82812,233.72461 297.73046,233.50586 296.68359,233.06836 C 295.64453,232.62305 294.70312,231.97852 293.85938,231.13477 C 293.02343,230.30664 292.38672,229.36914 291.94922,228.32227 C 291.51172,227.26758 291.29297,226.16602 291.29297,225.01758 C 291.29297,223.85353 291.51172,222.74415 291.94922,221.68945 C 292.38672,220.62697 293.02343,219.66994 293.85938,218.81836 C 294.67968,217.99025 295.60937,217.36134 296.64844,216.93164 C 297.68749,216.49416 298.79687,216.27541 299.97656,216.27539" + id="text6109" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 472.88672,203.63086 L 472.88672,186.36914 L 476.60156,186.36914 L 483.60938,198.22852 L 483.60938,186.36914 L 487.11328,186.36914 L 487.11328,203.63086 L 483.44531,203.63086 L 476.39063,191.77148 L 476.39063,203.63086 L 472.88672,203.63086 M 483.82031,181.0957 C 483.61717,182.07229 483.31639,182.79494 482.91797,183.26367 C 482.51952,183.72463 482.0078,183.9551 481.38281,183.95508 C 481.21874,183.9551 481.0664,183.94729 480.92578,183.93164 C 480.78515,183.90822 480.64452,183.87307 480.50391,183.82617 L 479.48438,183.52148 C 479.33593,183.48244 479.19921,183.4551 479.07422,183.43945 C 478.94921,183.41604 478.82812,183.40432 478.71094,183.4043 C 478.44531,183.40432 478.23046,183.47463 478.06641,183.61523 C 477.90234,183.75588 477.77343,183.98635 477.67969,184.30664 L 476.39063,184.30664 C 476.57812,183.36135 476.86718,182.66604 477.25781,182.2207 C 477.64843,181.77541 478.15624,181.55276 478.78125,181.55273 C 478.9453,181.55276 479.10937,181.56838 479.27344,181.59961 C 479.43749,181.62307 479.60937,181.66213 479.78906,181.7168 L 480.87891,182.00977 C 480.97265,182.04104 481.0703,182.06447 481.17188,182.08008 C 481.28124,182.09572 481.39843,182.10354 481.52344,182.10352 C 481.77343,182.10354 481.98046,182.02151 482.14453,181.85742 C 482.3164,181.68557 482.4453,181.43166 482.53125,181.0957 L 483.82031,181.0957" + id="text6113" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 535.83398,220.83432 L 539.2207,220.83432 L 538.33008,225.93198 C 538.21289,226.55698 538.12304,227.15073 538.06055,227.71323 C 537.99804,228.26792 537.96679,228.72104 537.9668,229.0726 C 537.96679,229.79917 538.13085,230.34214 538.45898,230.70151 C 538.7871,231.05307 539.2871,231.22885 539.95898,231.22885 C 540.74023,231.22885 541.3457,230.90854 541.77539,230.26791 C 542.21288,229.62729 542.57616,228.49058 542.86523,226.85776 L 543.91992,220.83432 L 547.30664,220.83432 L 545.04492,233.6312 L 541.9043,233.6312 L 542.11523,232.2601 C 541.7871,232.86948 541.41991,233.31479 541.01367,233.59604 C 540.61523,233.87729 540.14257,234.01791 539.5957,234.01791 C 539.07226,234.01791 538.60742,233.90073 538.20117,233.66635 C 537.79492,233.43979 537.42773,233.08432 537.09961,232.59995 L 536.04492,238.76401 L 532.69336,238.76401 L 535.83398,220.83432" + id="text6117" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 607.875,197.70117 C 607.74217,199.66211 606.98436,201.22071 605.60156,202.37695 C 604.22655,203.5332 602.42968,204.11133 600.21094,204.11133 C 597.65624,204.11133 595.66796,203.31445 594.24609,201.7207 C 592.83203,200.12696 592.125,197.89258 592.125,195.01758 C 592.125,192.08009 592.84765,189.83009 594.29297,188.26758 C 595.73828,186.7051 597.8164,185.92385 600.52734,185.92383 C 602.73046,185.92385 604.46874,186.46291 605.74219,187.54102 C 607.02342,188.61134 607.72655,190.12697 607.85156,192.08789 L 604.34766,192.08789 C 604.19921,191.11134 603.80077,190.36915 603.15234,189.86133 C 602.50389,189.34572 601.6289,189.08791 600.52734,189.08789 C 598.96484,189.08791 597.77734,189.59181 596.96484,190.59961 C 596.15234,191.60743 595.74609,193.08009 595.74609,195.01758 C 595.74609,196.89258 596.14843,198.3418 596.95313,199.36523 C 597.76562,200.38868 598.91796,200.90039 600.41016,200.90039 C 601.48827,200.90039 602.37108,200.62696 603.05859,200.08008 C 603.74608,199.52539 604.19139,198.73243 604.39453,197.70117 L 607.875,197.70117 M 597.62109,208.76367 L 597.62109,207.25195 C 598.24609,207.41601 598.81249,207.54101 599.32031,207.62695 C 599.82812,207.71289 600.26171,207.75586 600.62109,207.75586 C 601.02733,207.75586 601.32421,207.68554 601.51172,207.54492 C 601.69921,207.41211 601.79296,207.19726 601.79297,206.90039 C 601.79296,206.60351 601.68358,206.39258 601.46484,206.26758 C 601.24608,206.14258 600.8828,206.08008 600.375,206.08008 C 600.1953,206.08008 600.05858,206.08008 599.96484,206.08008 C 599.87108,206.08789 599.78515,206.0957 599.70703,206.10352 L 599.70703,203.63086 L 600.90234,203.63086 L 600.90234,204.68555 L 601.07813,204.68555 C 601.99218,204.68555 602.67968,204.87305 603.14063,205.24805 C 603.60155,205.62304 603.83202,206.18164 603.83203,206.92383 C 603.83202,207.70507 603.57421,208.29101 603.05859,208.68164 C 602.54296,209.07226 601.76952,209.26757 600.73828,209.26758 C 600.33983,209.26757 599.87108,209.2246 599.33203,209.13867 C 598.80077,209.05273 598.23046,208.92773 597.62109,208.76367" + id="text6121" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 721.7168,216.36914 L 721.7168,219.82617 L 718.23633,219.82617 L 718.23633,216.36914 L 721.7168,216.36914 M 721.55273,221.39648 C 721.55273,221.47462 721.55663,221.5879 721.56445,221.73633 C 721.57226,221.88478 721.57616,221.99415 721.57617,222.06445 C 721.57616,222.74415 721.50194,223.31446 721.35352,223.77539 C 721.20507,224.23634 720.96679,224.66602 720.63867,225.06445 C 720.38085,225.36134 720.00195,225.70118 719.50195,226.08398 C 719.00976,226.4668 718.69335,226.74415 718.55273,226.91602 C 718.24804,227.25977 718.0332,227.57618 717.9082,227.86523 C 717.79101,228.1543 717.73242,228.4668 717.73242,228.80273 C 717.73242,229.55274 717.93554,230.13477 718.3418,230.54883 C 718.74804,230.95508 719.32226,231.15821 720.06445,231.1582 C 720.79882,231.15821 721.38085,230.91211 721.81055,230.41992 C 722.24023,229.91993 722.4746,229.22071 722.51367,228.32227 L 725.8418,228.32227 L 725.8418,228.68555 C 725.84178,230.3418 725.31835,231.66211 724.27148,232.64648 C 723.23241,233.62305 721.83007,234.11133 720.06445,234.11133 C 718.25976,234.11133 716.82226,233.64648 715.75195,232.7168 C 714.68945,231.7793 714.1582,230.53321 714.1582,228.97852 C 714.1582,228.40821 714.2168,227.90821 714.33398,227.47852 C 714.45117,227.04883 714.63086,226.65821 714.87305,226.30664 C 715.18554,225.86915 715.67773,225.39259 716.34961,224.87695 C 717.02148,224.36134 717.43554,224.03321 717.5918,223.89258 C 717.88867,223.60353 718.0996,223.29884 718.22461,222.97852 C 718.35742,222.6504 718.42382,222.25587 718.42383,221.79492 C 718.42382,221.75587 718.41992,221.69337 718.41211,221.60742 C 718.40429,221.51368 718.40039,221.44337 718.40039,221.39648 L 721.55273,221.39648" + id="text6131" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Matrix Unicode" + d="" + id="text6955" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="137.05411" + y="23.149496" + id="text4346" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348" + x="137.05411" + y="23.149496" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> Ë </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="186.05411" + y="27.3995" + id="text4346-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-1" + x="186.05411" + y="27.3995" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> ¯ </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="482.80411" + y="24.6495" + id="text4346-1" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-7" + x="482.80411" + y="24.6495" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> Ë› </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="558.30408" + y="24.399498" + id="text4346-6" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-0" + x="558.30408" + y="24.399498" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> ˘ </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="626.55408" + y="11.1495" + id="text4346-0" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-09" + x="626.55408" + y="11.1495" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"><tspan + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:12.5px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" + id="tspan4483"> o</tspan></tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="667.80408" + y="28.899498" + id="text4346-31" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-15" + x="667.80408" + y="28.899498" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> . </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="619.55408" + y="203.14951" + id="text4346-38" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-8" + x="619.55408" + y="203.14951" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> ˇ </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="620.30408" + y="232.14951" + id="text4346-9" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-6" + x="620.30408" + y="232.14951" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> Ë™ </tspan></text> + <path + inkscape:connector-curvature="0" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:24px;line-height:125%;font-family:'Swis721 BT';text-align:center;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="m 402.88672,6.52148 2.95312,0 5.63672,6.574219 -2.7539,0 -4.34766,-4.3476565 -4.37109,4.3476565 -2.75391,0 5.63672,-6.574219" + id="text6091-3" /> + </g> +</svg> diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg.2016_08_18_09_06_36.0.svg b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg.2016_08_18_09_06_36.0.svg new file mode 100644 index 0000000000..2304b2a4c3 --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg.2016_08_18_09_06_36.0.svg @@ -0,0 +1,1049 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="900" + height="300" + id="svg2" + sodipodi:version="0.32" + inkscape:version="0.91 r13725" + version="1.0" + sodipodi:docname="KB_US-International-Alternative.svg" + inkscape:output_extension="org.inkscape.output.svg.inkscape" + inkscape:export-filename="D:\Users\Felix\Source\Repos\qmk_firmware\keyboards\s60-x\keymaps\ansi_qwertz\docs\KB_US-International-Alternative.png" + inkscape:export-xdpi="79.910004" + inkscape:export-ydpi="79.910004"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow1Lend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Lend" + style="overflow:visible;"> + <path + id="path5387" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;" + transform="scale(0.8) rotate(180)" /> + </marker> + <marker + inkscape:stockid="Arrow1Lstart" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Lstart" + style="overflow:visible"> + <path + id="path5390" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none" + transform="scale(0.8)" /> + </marker> + <marker + inkscape:stockid="Tail" + orient="auto" + refY="0.0" + refX="0.0" + id="Tail" + style="overflow:visible"> + <g + id="g5342" + transform="scale(-1.2)"> + <path + id="path5344" + d="M -3.8048674,-3.9585227 L 0.54352094,-0.00068114835" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5346" + d="M -1.2866832,-3.9585227 L 3.0617053,-0.00068114835" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5348" + d="M 1.3053582,-3.9585227 L 5.6537466,-0.00068114835" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5350" + d="M -3.8048674,4.1775838 L 0.54352094,0.21974226" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5352" + d="M -1.2866832,4.1775838 L 3.0617053,0.21974226" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5354" + d="M 1.3053582,4.1775838 L 5.6537466,0.21974226" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + </g> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Mend" + style="overflow:visible;"> + <path + id="path5363" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(0.6) rotate(180) translate(-5,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Lend" + style="overflow:visible;"> + <path + id="path5369" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(1.1) rotate(180) translate(-5,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Send" + style="overflow:visible;"> + <path + id="path5375" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;" + transform="scale(0.2) rotate(180)" /> + </marker> + <marker + inkscape:stockid="Arrow2Send" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Send" + style="overflow:visible;"> + <path + id="path5357" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(0.3) rotate(180) translate(-5,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path5381" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;" + transform="scale(0.4) rotate(180)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path5372" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(1.1) translate(-5,0)" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.4142136" + inkscape:cx="435.66801" + inkscape:cy="291.15819" + inkscape:document-units="px" + inkscape:current-layer="layer1" + inkscape:grid-points="true" + showgrid="true" + gridtolerance="15px" + showborder="false" + inkscape:window-width="1920" + inkscape:window-height="1017" + inkscape:window-x="1912" + inkscape:window-y="-8" + showguides="true" + inkscape:guide-bbox="true" + inkscape:grid-bbox="true" + inkscape:window-maximized="1"> + <inkscape:grid + id="GridFromPre046Settings" + type="xygrid" + originx="0px" + originy="0px" + spacingx="7.5px" + spacingy="7.5px" + color="#0000ff" + empcolor="#0000ff" + opacity="0.12156863" + empopacity="0.25098039" + empspacing="4" /> + </sodipodi:namedview> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1"> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,0 L 60,0 L 60,60 L 0,60 L 0,0 z " + id="rect2186" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 60,0 L 120,0 L 120,60 L 60,60 L 60,0 z " + id="rect2218" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 120,0 L 180,0 L 180,60 L 120,60 L 120,0 z " + id="rect2222" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 180,0 L 240,0 L 240,60 L 180,60 L 180,0 z " + id="rect2228" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 240,0 L 300,0 L 300,60 L 240,60 L 240,0 z " + id="rect2230" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 300,0 L 360,0 L 360,60 L 300,60 L 300,0 z " + id="rect2232" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 360,0 L 420,0 L 420,60 L 360,60 L 360,0 z " + id="rect2234" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 420,0 L 480,0 L 480,60 L 420,60 L 420,0 z " + id="rect2236" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 480,0 L 540,0 L 540,60 L 480,60 L 480,0 z " + id="rect2238" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 540,0 L 600,0 L 600,60 L 540,60 L 540,0 z " + id="rect2240" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 600,0 L 660,0 L 660,60 L 600,60 L 600,0 z " + id="rect2242" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 660,0 L 720,0 L 720,60 L 660,60 L 660,0 z " + id="rect2244" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 720,0 L 780,0 L 780,60 L 720,60 L 720,0 z " + id="rect2246" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 780,0 L 900,0 L 900,60 L 780,60 L 780,0 z " + id="rect2248" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,60 L 90,60 L 90,120 L 0,120 L 0,60 z " + id="rect2250" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 90,60 L 150,60 L 150,120 L 90,120 L 90,60 z " + id="rect2252" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 150,60 L 210,60 L 210,120 L 150,120 L 150,60 z " + id="rect2254" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 210,60 L 270,60 L 270,120 L 210,120 L 210,60 z " + id="rect2256" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 270,60 L 330,60 L 330,120 L 270,120 L 270,60 z " + id="rect2258" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 330,60 L 390,60 L 390,120 L 330,120 L 330,60 z " + id="rect2262" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 390,60 L 450,60 L 450,120 L 390,120 L 390,60 z " + id="rect2264" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 450,60 L 510,60 L 510,120 L 450,120 L 450,60 z " + id="rect2266" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 510,60 L 570,60 L 570,120 L 510,120 L 510,60 z " + id="rect2270" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 570,60 L 630,60 L 630,120 L 570,120 L 570,60 z " + id="rect2272" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 630,60 L 690,60 L 690,120 L 630,120 L 630,60 z " + id="rect2274" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 690,60 L 750,60 L 750,120 L 690,120 L 690,60 z " + id="rect2278" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 750,60 L 810,60 L 810,120 L 750,120 L 750,60 z " + id="rect2280" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 810,60 L 900,60 L 900,120 L 810,120 L 810,60 z " + id="rect2284" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,120 L 105,120 L 105,180 L 0,180 L 0,120 z " + id="rect2286" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 105,120 L 165,120 L 165,180 L 105,180 L 105,120 z " + id="rect2292" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 165,120 L 225,120 L 225,180 L 165,180 L 165,120 z " + id="rect2296" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 225,120 L 285,120 L 285,180 L 225,180 L 225,120 z " + id="rect2298" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 285,120 L 345,120 L 345,180 L 285,180 L 285,120 z " + id="rect2300" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 345,120 L 405,120 L 405,180 L 345,180 L 345,120 z " + id="rect2302" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 405,120 L 465,120 L 465,180 L 405,180 L 405,120 z " + id="rect2306" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 465,120 L 525,120 L 525,180 L 465,180 L 465,120 z " + id="rect2308" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 525,120 L 585,120 L 585,180 L 525,180 L 525,120 z " + id="rect2312" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 585,120 L 645,120 L 645,180 L 585,180 L 585,120 z " + id="rect2314" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 645,120 L 705,120 L 705,180 L 645,180 L 645,120 z " + id="rect2316" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 705,120 L 765,120 L 765,180 L 705,180 L 705,120 z " + id="rect2318" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 765,120 L 900,120 L 900,180 L 765,180 L 765,120 z " + id="rect2320" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,180 L 135,180 L 135,240 L 0,240 L 0,180 z " + id="rect2322" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 135,180 L 195,180 L 195,240 L 135,240 L 135,180 z " + id="rect2324" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 195,180 L 255,180 L 255,240 L 195,240 L 195,180 z " + id="rect2326" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 255,180 L 315,180 L 315,240 L 255,240 L 255,180 z " + id="rect2330" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 315,180 L 375,180 L 375,240 L 315,240 L 315,180 z " + id="rect2334" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 375,180 L 435,180 L 435,240 L 375,240 L 375,180 z " + id="rect2336" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 435,180 L 495,180 L 495,240 L 435,240 L 435,180 z " + id="rect2338" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 495,180 L 555,180 L 555,240 L 495,240 L 495,180 z " + id="rect2340" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 555,180 L 615,180 L 615,240 L 555,240 L 555,180 z " + id="rect2342" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 615,180 L 675,180 L 675,240 L 615,240 L 615,180 z " + id="rect2344" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 675,180 L 735,180 L 735,240 L 675,240 L 675,180 z " + id="rect2346" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 735,180 L 900,180 L 900,240 L 735,240 L 735,180 z " + id="rect2348" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,240 L 90,240 L 90,300 L 0,300 L 0,240 z " + id="rect2350" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 810,240 L 900,240 L 900,300 L 810,300 L 810,240 z " + id="rect2352" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 150,240 L 240,240 L 240,300 L 150,300 L 150,240 z " + id="rect2354" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 600,240 L 690,240 L 690,300 L 600,300 L 600,240 z " + id="rect2360" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 240,240 L 600,240 L 600,300 L 240,300 L 240,240 z " + id="rect2362" /> + <path + style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 90,240 L 150,240 L 150,300 L 90,300 L 90,240 z " + id="rect2364" /> + <path + style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 690,240 L 750,240 L 750,300 L 690,300 L 690,240 z " + id="rect2366" /> + <path + style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 750,240 L 810,240 L 810,300 L 750,300 L 750,240 z " + id="rect2368" /> + <path + style="" + d="" + id="flowRoot4146" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 75.351563,18.826172 L 74.4375,11.056641 L 74.4375,6.3691406 L 78.046875,6.3691406 L 78.046875,11.056641 L 77.132813,18.826172 L 75.351563,18.826172 M 74.484375,23.630859 L 74.484375,20.173828 L 77.964844,20.173828 L 77.964844,23.630859 L 74.484375,23.630859 M 75.351563,53.630859 L 75.351563,42.158203 L 71.34375,42.158203 L 71.34375,39.802734 L 71.601563,39.802734 C 73.062496,39.802748 74.124995,39.576186 74.789063,39.123047 C 75.460931,38.669937 75.855462,37.912125 75.972656,36.849609 L 78.65625,36.849609 L 78.65625,53.630859 L 75.351563,53.630859" + id="text5091" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 23.34375,14.220703 L 23.34375,16.810547 C 22.531233,17.365241 21.761702,17.775396 21.035156,18.041016 C 20.316391,18.298833 19.605455,18.42774 18.902344,18.427734 C 18.542956,18.42774 18.183581,18.39649 17.824219,18.333984 C 17.464832,18.27149 17.105457,18.181646 16.746094,18.064453 C 16.558583,18.001959 16.281239,17.904303 15.914063,17.771484 C 14.203116,17.185553 12.902336,16.892585 12.011719,16.892578 C 11.34765,16.892585 10.652339,17.041022 9.9257813,17.337891 C 9.2070275,17.626959 8.3984345,18.091802 7.5,18.732422 L 7.5,16.142578 C 8.3359346,15.580086 9.1328088,15.162118 9.890625,14.888672 C 10.648432,14.607431 11.363275,14.466806 12.035156,14.466797 C 12.949211,14.466806 14.085929,14.693368 15.445313,15.146484 C 15.46874,15.154305 15.484365,15.158212 15.492188,15.158203 C 15.632802,15.205087 15.847646,15.279305 16.136719,15.380859 C 17.347644,15.810555 18.285143,16.025398 18.949219,16.025391 C 19.613267,16.025398 20.29686,15.880867 21,15.591797 C 21.703109,15.302743 22.484358,14.845712 23.34375,14.220703 M 11.988281,35.033203 L 15.011719,35.033203 L 17.320313,39.369141 L 15.65625,39.369141 L 11.988281,35.033203" + id="text5103" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 136.47578,20.443359 C 136.04608,21.099612 135.54999,21.583986 134.9875,21.896484 C 134.42499,22.201173 133.76093,22.353517 132.99532,22.353516 C 131.76093,22.353517 130.81953,22.01758 130.1711,21.345703 C 129.53047,20.673831 129.21015,19.681645 129.21016,18.369141 C 129.21015,16.50196 129.75312,14.935556 130.83907,13.669922 C 131.93281,12.404308 133.27656,11.771496 134.87032,11.771484 C 135.4953,11.771496 136.03827,11.900402 136.49922,12.158203 C 136.96015,12.416027 137.33905,12.798839 137.63594,13.306641 L 138.25703,12.158203 L 140.34297,12.158203 L 138.62032,19.166016 C 138.59686,19.251958 138.57733,19.341801 138.56172,19.435547 C 138.54608,19.521488 138.53827,19.591801 138.53828,19.646484 C 138.53827,19.919926 138.63202,20.126957 138.81953,20.267578 C 139.00702,20.400394 139.28436,20.4668 139.65157,20.466797 C 139.95624,20.4668 140.27264,20.388675 140.60078,20.232422 C 140.9367,20.076175 141.2492,19.857426 141.53828,19.576172 C 142.21014,18.951177 142.71795,18.220709 143.06172,17.384766 C 143.41326,16.548835 143.58904,15.630867 143.58907,14.630859 C 143.58904,12.75587 142.86248,11.216809 141.40938,10.013672 C 139.96405,8.8027492 138.09686,8.1972811 135.80782,8.1972656 C 134.70624,8.1972811 133.6789,8.3300934 132.72578,8.5957031 C 131.78046,8.8613429 130.92109,9.2558737 130.14766,9.7792969 C 128.81953,10.669935 127.79609,11.783215 127.07735,13.119141 C 126.36641,14.455087 126.01094,15.91993 126.01094,17.513672 C 126.01094,19.912113 126.81953,21.83008 128.43672,23.267578 C 130.0539,24.697265 132.21406,25.412108 134.91719,25.412109 C 136.1828,25.412108 137.41718,25.220702 138.62032,24.837891 C 139.83124,24.455077 140.95623,23.90039 141.99532,23.173828 L 142.95625,24.544922 C 141.76092,25.443358 140.49139,26.119138 139.14766,26.572266 C 137.81171,27.025387 136.41718,27.25195 134.96407,27.251953 C 133.46405,27.25195 132.08515,27.060543 130.82735,26.677734 C 129.56953,26.302732 128.45234,25.744139 127.47578,25.001953 C 126.26484,24.05664 125.35859,22.966798 124.75703,21.732422 C 124.15547,20.49805 123.85469,19.099614 123.85469,17.537109 C 123.85469,16.232429 124.05781,14.990243 124.46407,13.810547 C 124.87813,12.623058 125.48359,11.544934 126.28047,10.576172 C 127.43672,9.1621238 128.82734,8.0918124 130.45235,7.3652344 C 132.07734,6.6386889 133.88593,6.275408 135.87813,6.2753906 C 137.19843,6.275408 138.43671,6.4550953 139.59297,6.8144531 C 140.75702,7.1660321 141.76873,7.6660316 142.62813,8.3144531 C 143.68279,9.1347801 144.46795,10.072279 144.9836,11.126953 C 145.50701,12.17384 145.76873,13.357432 145.76875,14.677734 C 145.76873,15.966805 145.51092,17.15821 144.99532,18.251953 C 144.48748,19.337895 143.75311,20.267581 142.79219,21.041016 C 142.2453,21.478518 141.64764,21.814455 140.99922,22.048828 C 140.35858,22.275392 139.69061,22.388673 138.99532,22.388672 C 138.16718,22.388673 137.54218,22.224611 137.12032,21.896484 C 136.70624,21.568361 136.4914,21.083987 136.47578,20.443359 M 137.06172,15.427734 C 136.96015,14.794931 136.73358,14.314462 136.38203,13.986328 C 136.03827,13.650401 135.58124,13.482432 135.01094,13.482422 C 134.1203,13.482432 133.34687,13.966807 132.69063,14.935547 C 132.03437,15.904305 131.70624,17.068366 131.70625,18.427734 C 131.70624,19.146489 131.86249,19.693363 132.175,20.068359 C 132.49531,20.443363 132.95624,20.630862 133.55782,20.630859 C 134.20624,20.630862 134.79608,20.384769 135.32735,19.892578 C 135.8664,19.400395 136.23358,18.75977 136.42891,17.970703 L 137.06172,15.427734 M 128.56563,53.630859 C 128.58125,52.130861 128.90156,50.861331 129.52657,49.822266 C 130.15156,48.775395 131.26094,47.716803 132.85469,46.646484 C 133.09687,46.482429 133.44844,46.255867 133.90938,45.966797 C 136.01875,44.615243 137.07343,43.314463 137.07344,42.064453 C 137.07343,41.322278 136.85078,40.736341 136.40547,40.306641 C 135.96015,39.876967 135.35078,39.662123 134.57735,39.662109 C 133.73359,39.662123 133.08125,39.927748 132.62032,40.458984 C 132.16719,40.982435 131.94062,41.732434 131.94063,42.708984 L 131.94063,42.849609 L 128.84688,42.849609 C 128.84688,40.927747 129.3625,39.44728 130.39375,38.408203 C 131.425,37.369157 132.89375,36.849626 134.8,36.849609 C 136.52656,36.849626 137.90546,37.322282 138.93672,38.267578 C 139.96796,39.205093 140.48358,40.455091 140.4836,42.017578 C 140.48358,43.134776 140.21405,44.103525 139.675,44.923828 C 139.13593,45.744149 138.09296,46.677741 136.5461,47.724609 C 136.21796,47.951178 135.76484,48.248052 135.18672,48.615234 C 133.71797,49.560551 132.88984,50.2793 132.70235,50.771484 L 140.31953,50.771484 L 140.31953,53.630859 L 128.56563,53.630859" + id="text5127" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 195.28125,13.693359 L 194.25,16.552734 L 197.19141,16.552734 L 198.19922,13.693359 L 195.28125,13.693359 M 195.28125,6.4746094 L 197.87109,6.4746094 L 196.16016,11.337891 L 198.99609,11.337891 L 200.73047,6.4746094 L 203.32031,6.4746094 L 201.58594,11.337891 L 204.90234,11.337891 L 204.03516,13.693359 L 200.75391,13.693359 L 199.76953,16.529297 L 203.16797,16.529297 L 202.33594,18.873047 L 198.92578,18.873047 L 197.19141,23.748047 L 194.60156,23.748047 L 196.33594,18.873047 L 193.47656,18.873047 L 191.73047,23.748047 L 189.15234,23.748047 L 190.86328,18.873047 L 187.5,18.873047 L 188.39063,16.529297 L 191.69531,16.529297 L 192.70313,13.693359 L 189.19922,13.693359 L 190.06641,11.337891 L 193.54688,11.337891 L 195.28125,6.4746094 M 190.07813,48.521484 L 193.30078,48.521484 C 193.30859,49.458989 193.53515,50.166019 193.98047,50.642578 C 194.42578,51.111331 195.08593,51.345705 195.96094,51.345703 C 196.80468,51.345705 197.45312,51.126956 197.90625,50.689453 C 198.36718,50.244144 198.59765,49.607426 198.59766,48.779297 C 198.59765,47.951178 198.32812,47.326178 197.78906,46.904297 C 197.2578,46.474617 196.46484,46.259773 195.41016,46.259766 C 195.35546,46.259773 195.26953,46.263679 195.15234,46.271484 C 195.04296,46.279304 194.96093,46.28321 194.90625,46.283203 L 194.90625,43.962891 L 195.26953,43.962891 C 196.23827,43.9629 196.95312,43.7754 197.41406,43.400391 C 197.8828,43.017589 198.11718,42.435558 198.11719,41.654297 C 198.11718,41.005872 197.91796,40.494154 197.51953,40.119141 C 197.1289,39.736342 196.59374,39.544936 195.91406,39.544922 C 195.17187,39.544936 194.59765,39.763686 194.19141,40.201172 C 193.78515,40.638685 193.58203,41.259778 193.58203,42.064453 L 193.58203,42.205078 L 190.41797,42.205078 C 190.45703,40.486341 190.96094,39.169936 191.92969,38.255859 C 192.90625,37.334001 194.28125,36.873064 196.05469,36.873047 C 197.73437,36.873064 199.0664,37.283219 200.05078,38.103516 C 201.03514,38.923843 201.52733,40.02931 201.52734,41.419922 C 201.52733,42.154308 201.35936,42.798839 201.02344,43.353516 C 200.68749,43.908213 200.18358,44.365244 199.51172,44.724609 C 200.37108,45.099618 201.01952,45.619149 201.45703,46.283203 C 201.90233,46.93946 202.12499,47.724615 202.125,48.638672 C 202.12499,50.318363 201.57421,51.650393 200.47266,52.634766 C 199.37108,53.619141 197.86718,54.111328 195.96094,54.111328 C 194.07812,54.111328 192.625,53.634766 191.60156,52.681641 C 190.58594,51.720705 190.07812,50.357425 190.07813,48.591797 L 190.07813,48.521484" + id="text5139" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 254.46094,21.451172 C 255.10155,21.365237 255.58984,21.134768 255.92578,20.759766 C 256.26171,20.384769 256.42968,19.884769 256.42969,19.259766 C 256.42968,18.705083 256.26952,18.248052 255.94922,17.888672 C 255.63671,17.52149 255.14062,17.236335 254.46094,17.033203 L 254.46094,21.451172 M 253.06641,13.435547 L 253.06641,9.4511719 C 252.45703,9.529311 251.99218,9.7402483 251.67188,10.083984 C 251.35156,10.419935 251.1914,10.87306 251.19141,11.443359 C 251.1914,11.919934 251.33984,12.318371 251.63672,12.638672 C 251.9414,12.958995 252.41796,13.22462 253.06641,13.435547 M 253.06641,26.267578 L 253.06641,24.017578 C 251.30078,23.908203 249.98047,23.396485 249.10547,22.482422 C 248.23047,21.568361 247.79297,20.24805 247.79297,18.521484 L 250.93359,18.521484 C 250.97265,19.365239 251.16796,20.033207 251.51953,20.525391 C 251.8789,21.009768 252.39453,21.318362 253.06641,21.451172 L 253.06641,16.599609 C 251.2539,16.138679 249.96484,15.537117 249.19922,14.794922 C 248.43359,14.052744 248.05078,13.03712 248.05078,11.748047 C 248.05078,10.318373 248.5039,9.1660301 249.41016,8.2910156 C 250.32422,7.4160318 251.54296,6.959001 253.06641,6.9199219 L 253.06641,5.4199219 L 254.46094,5.4199219 L 254.46094,6.9199219 C 255.98437,6.9980635 257.17186,7.4590005 258.02344,8.3027344 C 258.87499,9.1386864 259.34374,10.318373 259.42969,11.841797 L 256.24219,11.841797 C 256.18749,11.115247 256.01171,10.56056 255.71484,10.177734 C 255.42577,9.7871232 255.0078,9.5683734 254.46094,9.5214844 L 254.46094,13.787109 C 256.39062,14.388681 257.74999,15.07618 258.53906,15.849609 C 259.32811,16.623054 259.72264,17.642584 259.72266,18.908203 C 259.72264,20.400394 259.26171,21.591799 258.33984,22.482422 C 257.42577,23.373047 256.1328,23.892578 254.46094,24.041016 L 254.46094,26.267578 L 253.06641,26.267578 M 254.64844,47.419922 L 254.64844,40.236328 L 250.08984,47.419922 L 254.64844,47.419922 M 254.57813,53.630859 L 254.57813,50.009766 L 247.5,50.009766 L 247.5,47.056641 L 253.6875,37.330078 L 257.84766,37.330078 L 257.84766,47.337891 L 259.79297,47.337891 L 259.79297,50.009766 L 257.84766,50.009766 L 257.84766,53.630859 L 254.57813,53.630859" + id="text5145" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 320.42578,19.740234 C 320.42577,20.263675 320.60155,20.705081 320.95313,21.064453 C 321.30467,21.416018 321.73827,21.591799 322.25391,21.591797 C 322.75389,21.591799 323.18358,21.412112 323.54297,21.052734 C 323.90233,20.68555 324.08201,20.24805 324.08203,19.740234 C 324.08201,19.240239 323.90233,18.814458 323.54297,18.462891 C 323.19139,18.103521 322.7617,17.923834 322.25391,17.923828 C 321.73827,17.923834 321.30467,18.099615 320.95313,18.451172 C 320.60155,18.794927 320.42577,19.224614 320.42578,19.740234 M 317.88281,19.740234 C 317.8828,18.521489 318.30468,17.494147 319.14844,16.658203 C 319.99217,15.822273 321.02733,15.404305 322.25391,15.404297 C 323.45701,15.404305 324.48045,15.830086 325.32422,16.681641 C 326.17576,17.525397 326.60154,18.544927 326.60156,19.740234 C 326.60154,20.943362 326.17576,21.974611 325.32422,22.833984 C 324.47264,23.685547 323.4492,24.111328 322.25391,24.111328 C 321.02733,24.111328 319.99217,23.689453 319.14844,22.845703 C 318.30468,22.001955 317.8828,20.9668 317.88281,19.740234 M 311.07422,24.111328 L 321.08203,6.8496094 L 322.96875,6.8496094 L 312.96094,24.111328 L 311.07422,24.111328 M 310.04297,11.220703 C 310.04297,11.73634 310.21484,12.169933 310.55859,12.521484 C 310.91015,12.873058 311.34375,13.048839 311.85938,13.048828 C 312.36718,13.048839 312.79687,12.873058 313.14844,12.521484 C 313.50781,12.162121 313.68749,11.728528 313.6875,11.220703 C 313.68749,10.720716 313.50781,10.294935 313.14844,9.9433594 C 312.79687,9.5839984 312.36718,9.4043111 311.85938,9.4042969 C 311.34375,9.4043111 310.91015,9.5800922 310.55859,9.9316406 C 310.21484,10.275404 310.04297,10.705091 310.04297,11.220703 M 307.5,11.220703 C 307.5,10.001967 307.92187,8.9707178 308.76563,8.1269531 C 309.60937,7.275407 310.64062,6.8496262 311.85938,6.8496094 C 313.06249,6.8496262 314.08593,7.2793132 314.92969,8.1386719 C 315.78124,8.990249 316.20702,10.017592 316.20703,11.220703 C 316.20702,12.423839 315.78124,13.451182 314.92969,14.302734 C 314.08593,15.146493 313.06249,15.568367 311.85938,15.568359 C 310.63281,15.568367 309.59765,15.150399 308.75391,14.314453 C 307.91797,13.478526 307.5,12.447277 307.5,11.220703 M 310.85156,49.119141 L 314.13281,49.119141 C 314.1875,49.853519 314.43359,50.423831 314.87109,50.830078 C 315.30859,51.228518 315.89453,51.427737 316.62891,51.427734 C 317.53515,51.427737 318.22655,51.162112 318.70313,50.630859 C 319.18749,50.099613 319.42968,49.337895 319.42969,48.345703 C 319.42968,47.416022 319.18358,46.685554 318.69141,46.154297 C 318.19921,45.615242 317.51952,45.345711 316.65234,45.345703 C 316.16796,45.345711 315.74218,45.443368 315.375,45.638672 C 315.00781,45.833992 314.69531,46.123054 314.4375,46.505859 L 311.41406,46.330078 L 312.50391,37.330078 L 322.14844,37.330078 L 322.14844,40.166016 L 314.87109,40.166016 L 314.4375,43.529297 C 314.80468,43.240245 315.22656,43.025401 315.70313,42.884766 C 316.17968,42.736339 316.71093,42.66212 317.29688,42.662109 C 318.96874,42.66212 320.3164,43.169932 321.33984,44.185547 C 322.37108,45.20118 322.88671,46.53321 322.88672,48.181641 C 322.88671,49.986332 322.3203,51.427737 321.1875,52.505859 C 320.05468,53.576172 318.53515,54.111328 316.62891,54.111328 C 314.89453,54.111328 313.51172,53.669922 312.48047,52.787109 C 311.45703,51.896486 310.91406,50.673831 310.85156,49.119141" + id="text5151" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 372.15234,48.298828 C 372.15234,49.25977 372.39062,50.021488 372.86719,50.583984 C 373.35156,51.146487 374.00781,51.427737 374.83594,51.427734 C 375.60937,51.427737 376.21484,51.154299 376.65234,50.607422 C 377.08983,50.06055 377.30858,49.298832 377.30859,48.322266 C 377.30858,47.423834 377.08202,46.724616 376.62891,46.224609 C 376.17577,45.724617 375.53905,45.474618 374.71875,45.474609 C 373.91406,45.474618 373.28515,45.724617 372.83203,46.224609 C 372.3789,46.724616 372.15234,47.416022 372.15234,48.298828 M 372.10547,43.916016 C 372.48828,43.525401 372.94921,43.232432 373.48828,43.037109 C 374.02734,42.833995 374.6289,42.732433 375.29297,42.732422 C 376.93358,42.732433 378.24608,43.232432 379.23047,44.232422 C 380.22264,45.23243 380.71874,46.56446 380.71875,48.228516 C 380.71874,49.994144 380.17968,51.419924 379.10156,52.505859 C 378.02343,53.591797 376.60155,54.134765 374.83594,54.134766 C 372.79687,54.134765 371.24609,53.431641 370.18359,52.025391 C 369.1289,50.619144 368.60156,48.560552 368.60156,45.849609 C 368.60156,42.935558 369.16797,40.708997 370.30078,39.169922 C 371.43359,37.623063 373.0664,36.849626 375.19922,36.849609 C 376.68358,36.849626 377.8789,37.236345 378.78516,38.009766 C 379.69921,38.783218 380.19921,39.830092 380.28516,41.150391 L 376.88672,41.150391 C 376.80858,40.611341 376.59765,40.205092 376.25391,39.931641 C 375.91015,39.658217 375.42968,39.521498 374.8125,39.521484 C 373.96874,39.521498 373.32031,39.888686 372.86719,40.623047 C 372.41406,41.349622 372.16015,42.447277 372.10547,43.916016" + id="text5157" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 432.85547,16.095703 L 431.96484,16.740234 C 431.60546,16.990241 431.33593,17.291022 431.15625,17.642578 C 430.97656,17.994146 430.88671,18.388677 430.88672,18.826172 C 430.88671,19.490239 431.11328,20.048832 431.56641,20.501953 C 432.01953,20.955081 432.58593,21.181643 433.26563,21.181641 C 433.76562,21.181643 434.24218,21.080081 434.69531,20.876953 C 435.15624,20.666019 435.58202,20.361331 435.97266,19.962891 L 432.85547,16.095703 M 433.79297,12.404297 L 434.20313,12.111328 C 434.57812,11.853527 434.85546,11.564465 435.03516,11.244141 C 435.21483,10.923841 435.30468,10.556654 435.30469,10.142578 C 435.30468,9.7441545 435.17968,9.4277486 434.92969,9.1933594 C 434.68749,8.958999 434.35546,8.8418117 433.93359,8.8417969 C 433.5039,8.8418117 433.16406,8.9629053 432.91406,9.2050781 C 432.66406,9.4394673 432.53906,9.7597795 432.53906,10.166016 C 432.53906,10.384779 432.59765,10.62306 432.71484,10.880859 C 432.83984,11.138684 433.01562,11.412122 433.24219,11.701172 L 433.79297,12.404297 M 431.15625,13.962891 L 430.47656,13.072266 C 430.125,12.603527 429.87109,12.166027 429.71484,11.759766 C 429.5664,11.345715 429.49218,10.912122 429.49219,10.458984 C 429.49218,9.2089988 429.89062,8.2168123 430.6875,7.4824219 C 431.49218,6.7402513 432.58203,6.3691579 433.95703,6.3691406 C 435.27733,6.3691579 436.3203,6.7090013 437.08594,7.3886719 C 437.85155,8.0683749 438.23436,8.9863428 438.23438,10.142578 C 438.23436,11.017591 438.0078,11.802746 437.55469,12.498047 C 437.10936,13.185557 436.40624,13.833994 435.44531,14.443359 L 437.91797,17.490234 C 438.15233,17.107428 438.33593,16.677741 438.46875,16.201172 C 438.60936,15.724617 438.70702,15.193368 438.76172,14.607422 L 441.80859,14.607422 C 441.72264,15.623055 441.5117,16.56446 441.17578,17.431641 C 440.83983,18.298833 440.37889,19.091801 439.79297,19.810547 L 442.93359,23.630859 L 438.94922,23.630859 L 437.77734,22.189453 C 437.08983,22.822266 436.33202,23.302735 435.50391,23.630859 C 434.68359,23.951172 433.82421,24.111328 432.92578,24.111328 C 431.33203,24.111328 430.02734,23.638672 429.01172,22.693359 C 428.0039,21.748049 427.5,20.541019 427.5,19.072266 C 427.5,17.978521 427.78125,17.037116 428.34375,16.248047 C 428.90625,15.458993 429.84375,14.697275 431.15625,13.962891 M 434.66016,53.630859 L 431.15625,53.630859 C 431.28125,51.341799 431.83203,49.07227 432.80859,46.822266 C 433.79296,44.572275 435.19531,42.361339 437.01563,40.189453 L 428.76563,40.189453 L 428.76563,37.330078 L 440.66016,37.330078 L 440.66016,39.849609 C 438.8164,41.880871 437.39843,44.029306 436.40625,46.294922 C 435.42187,48.560552 434.83984,51.005862 434.66016,53.630859" + id="text5163" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 493.5,13.212891 L 491.4375,16.119141 L 489.44531,14.724609 L 491.69531,11.900391 L 488.41406,10.986328 L 489.17578,8.6074219 L 492.32813,9.7324219 L 492.32813,6.3691406 L 494.64844,6.3691406 L 494.64844,9.7324219 L 497.80078,8.6308594 L 498.58594,11.009766 L 495.30469,11.900391 L 497.53125,14.701172 L 495.49219,16.166016 L 493.5,13.212891 M 490.875,48.755859 C 490.875,49.576176 491.10156,50.208988 491.55469,50.654297 C 492.01562,51.099612 492.67187,51.322268 493.52344,51.322266 C 494.33593,51.322268 494.97265,51.095706 495.43359,50.642578 C 495.90233,50.189457 496.13671,49.560551 496.13672,48.755859 C 496.13671,47.982428 495.89843,47.361334 495.42188,46.892578 C 494.9453,46.423835 494.31249,46.189461 493.52344,46.189453 C 492.73437,46.189461 492.09374,46.427742 491.60156,46.904297 C 491.11718,47.380866 490.875,47.998053 490.875,48.755859 M 491.14453,41.560547 C 491.14453,42.208996 491.34765,42.708995 491.75391,43.060547 C 492.16015,43.404307 492.74218,43.576182 493.5,43.576172 C 494.2578,43.576182 494.83984,43.400401 495.24609,43.048828 C 495.66015,42.697277 495.86718,42.201183 495.86719,41.560547 C 495.86718,40.93556 495.65624,40.443373 495.23438,40.083984 C 494.81249,39.724623 494.23437,39.544936 493.5,39.544922 C 492.78124,39.544936 492.20703,39.72853 491.77734,40.095703 C 491.35546,40.462904 491.14453,40.951185 491.14453,41.560547 M 489.9375,44.818359 C 489.23437,44.427744 488.72656,43.970713 488.41406,43.447266 C 488.10156,42.923839 487.94531,42.255871 487.94531,41.443359 C 487.94531,40.005873 488.4375,38.876968 489.42188,38.056641 C 490.40625,37.236345 491.76562,36.826189 493.5,36.826172 C 495.24999,36.826189 496.61718,37.236345 497.60156,38.056641 C 498.59374,38.869155 499.08983,39.998061 499.08984,41.443359 C 499.08983,42.216808 498.92186,42.888683 498.58594,43.458984 C 498.24999,44.021494 497.74608,44.474619 497.07422,44.818359 C 497.89452,45.20118 498.51171,45.73243 498.92578,46.412109 C 499.33983,47.083991 499.54686,47.904303 499.54688,48.873047 C 499.54686,50.505862 499.0078,51.787111 497.92969,52.716797 C 496.85936,53.646484 495.3828,54.111328 493.5,54.111328 C 491.59375,54.111328 490.11328,53.650391 489.05859,52.728516 C 488.0039,51.806642 487.47656,50.521487 487.47656,48.873047 C 487.47656,47.912115 487.67187,47.107428 488.0625,46.458984 C 488.46094,45.802742 489.08594,45.255868 489.9375,44.818359" + id="text5169" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 557.85938,6.3691406 C 556.78124,8.1347811 555.98046,9.9316543 555.45703,11.759766 C 554.93359,13.587901 554.67187,15.505868 554.67188,17.513672 C 554.67187,19.513676 554.93359,21.427737 555.45703,23.255859 C 555.98046,25.083983 556.78124,26.880856 557.85938,28.646484 L 555.38672,28.646484 C 554.01953,26.779294 552.98046,24.904296 552.26953,23.021484 C 551.5664,21.130862 551.21484,19.294926 551.21484,17.513672 C 551.21484,15.73243 551.5664,13.896494 552.26953,12.005859 C 552.98046,10.115248 554.01953,8.2363435 555.38672,6.3691406 L 557.85938,6.3691406 M 556.06641,42.685547 C 556.0664,41.724621 555.82421,40.96681 555.33984,40.412109 C 554.86327,39.849623 554.21093,39.568373 553.38281,39.568359 C 552.60156,39.568373 551.99218,39.837904 551.55469,40.376953 C 551.125,40.916028 550.91015,41.669934 550.91016,42.638672 C 550.91015,43.544932 551.13671,44.251963 551.58984,44.759766 C 552.04296,45.267586 552.67968,45.521492 553.5,45.521484 C 554.30468,45.521492 554.93359,45.271493 555.38672,44.771484 C 555.83983,44.271494 556.0664,43.576182 556.06641,42.685547 M 556.125,47.056641 C 555.73437,47.447272 555.27343,47.74024 554.74219,47.935547 C 554.21093,48.130865 553.61327,48.228521 552.94922,48.228516 C 551.30078,48.228521 549.98047,47.732428 548.98828,46.740234 C 547.99609,45.748055 547.5,44.419931 547.5,42.755859 C 547.5,40.990247 548.03906,39.564467 549.11719,38.478516 C 550.19531,37.392594 551.61718,36.849626 553.38281,36.849609 C 555.42968,36.849626 556.98436,37.556657 558.04688,38.970703 C 559.11718,40.376966 559.65233,42.431652 559.65234,45.134766 C 559.65233,48.041021 559.08202,50.267581 557.94141,51.814453 C 556.80077,53.361328 555.16015,54.134765 553.01953,54.134766 C 551.54296,54.134765 550.35156,53.751953 549.44531,52.986328 C 548.53906,52.212892 548.04297,51.162112 547.95703,49.833984 L 551.34375,49.845703 C 551.42187,50.384769 551.63281,50.787112 551.97656,51.052734 C 552.32031,51.318362 552.80468,51.451174 553.42969,51.451172 C 554.27343,51.451174 554.91796,51.083987 555.36328,50.349609 C 555.80858,49.615238 556.06249,48.517583 556.125,47.056641" + id="text5175" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 609.375,6.3691406 L 611.87109,6.3691406 C 613.23046,8.228531 614.26171,10.103529 614.96484,11.994141 C 615.66796,13.876963 616.01952,15.716805 616.01953,17.513672 C 616.01952,19.302739 615.66796,21.142581 614.96484,23.033203 C 614.26171,24.923827 613.23046,26.794919 611.87109,28.646484 L 609.375,28.646484 C 610.46094,26.873044 611.26562,25.072264 611.78906,23.244141 C 612.32031,21.408205 612.58593,19.498051 612.58594,17.513672 C 612.58593,15.521492 612.32031,13.611338 611.78906,11.783203 C 611.26562,9.9550918 610.46094,8.1504061 609.375,6.3691406 M 610.98047,45.474609 C 610.98046,47.513678 611.18359,48.994145 611.58984,49.916016 C 612.0039,50.837893 612.66015,51.29883 613.55859,51.298828 C 614.45702,51.29883 615.11327,50.833987 615.52734,49.904297 C 615.9414,48.974614 616.14843,47.498053 616.14844,45.474609 C 616.14843,43.44337 615.9414,41.966809 615.52734,41.044922 C 615.11327,40.12306 614.45702,39.662123 613.55859,39.662109 C 612.66015,39.662123 612.0039,40.12306 611.58984,41.044922 C 611.18359,41.958996 610.98046,43.435557 610.98047,45.474609 M 607.5,45.474609 C 607.5,42.591808 608,40.43556 609,39.005859 C 610.00781,37.568375 611.52734,36.849626 613.55859,36.849609 C 615.58202,36.849626 617.09765,37.572282 618.10547,39.017578 C 619.12108,40.455091 619.62889,42.615245 619.62891,45.498047 C 619.62889,48.380865 619.12499,50.533206 618.11719,51.955078 C 617.11718,53.376953 615.59765,54.08789 613.55859,54.087891 C 611.52734,54.08789 610.00781,53.373047 609,51.943359 C 608,50.513675 607.5,48.357427 607.5,45.474609" + id="text5181" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 667.5,26.900391 L 679.5,26.900391 L 679.5,29.291016 L 667.5,29.291016 L 667.5,26.900391 M 670.20703,48.849609 L 670.20703,45.638672 L 676.79297,45.638672 L 676.79297,48.849609 L 670.20703,48.849609" + id="text5187" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 733.33594,9.3222656 L 735.70313,9.3222656 L 735.70313,15.298828 L 741.53906,15.298828 L 741.53906,17.630859 L 735.70313,17.630859 L 735.70313,23.630859 L 733.33594,23.630859 L 733.33594,17.630859 L 727.5,17.630859 L 727.5,15.298828 L 733.33594,15.298828 L 733.33594,9.3222656 M 727.5,47.818359 L 741.53906,47.818359 L 741.53906,50.150391 L 727.5,50.150391 L 727.5,47.818359 M 727.5,42.779297 L 741.53906,42.779297 L 741.53906,45.111328 L 727.5,45.111328 L 727.5,42.779297" + id="text5201" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 11.070313,95.601563 L 11.070313,86.148438 L 7.65625,86.148438 L 7.65625,84.09375 L 16.828125,84.09375 L 16.828125,86.148438 L 13.4375,86.148438 L 13.4375,95.601563 L 11.070313,95.601563 M 22.859375,94.546875 C 22.572911,94.989584 22.197911,95.328125 21.734375,95.5625 C 21.270829,95.791666 20.731767,95.90625 20.117188,95.90625 C 19.294269,95.90625 18.658853,95.671875 18.210938,95.203125 C 17.768228,94.734376 17.546874,94.06771 17.546875,93.203125 C 17.546874,92.401045 17.768228,91.789066 18.210938,91.367188 C 18.658853,90.945317 19.395831,90.656255 20.421875,90.5 C 20.656246,90.463547 20.963538,90.42188 21.34375,90.375 C 22.307286,90.250005 22.789057,89.97136 22.789063,89.539063 C 22.789057,89.195319 22.682286,88.950527 22.46875,88.804688 C 22.255203,88.653653 21.898433,88.578132 21.398438,88.578125 C 20.9401,88.578132 20.588538,88.669278 20.34375,88.851563 C 20.098955,89.033861 19.97656,89.294277 19.976563,89.632813 L 19.976563,89.757813 L 17.851563,89.757813 L 17.851563,89.601563 C 17.851562,88.731778 18.158853,88.049487 18.773438,87.554688 C 19.388018,87.054696 20.236976,86.804696 21.320313,86.804688 C 22.507807,86.804696 23.41666,87.010425 24.046875,87.421875 C 24.682284,87.833341 24.999992,88.427091 25,89.203125 L 25,94.03125 C 24.999992,94.385418 25.03645,94.651043 25.109375,94.828125 C 25.182283,95.000001 25.304679,95.130209 25.476563,95.21875 L 25.476563,95.601563 L 23.109375,95.601563 C 23.031244,95.455729 22.971348,95.294271 22.929688,95.117188 C 22.888015,94.940105 22.864577,94.750001 22.859375,94.546875 M 22.820313,91.421875 C 22.450515,91.593754 22.023432,91.731775 21.539063,91.835938 C 21.059892,91.940108 20.812496,91.994795 20.796875,92 C 20.39583,92.114587 20.11458,92.257816 19.953125,92.429688 C 19.796872,92.601566 19.718747,92.838544 19.71875,93.140625 C 19.718747,93.453127 19.82031,93.703127 20.023438,93.890625 C 20.226559,94.072918 20.499997,94.164064 20.84375,94.164063 C 21.458329,94.164064 21.940099,93.992189 22.289063,93.648438 C 22.643224,93.299481 22.820307,92.825524 22.820313,92.226563 L 22.820313,91.421875 M 27.039063,84.09375 L 29.25,84.09375 L 29.25,88.164063 C 29.531246,87.721362 29.882809,87.388029 30.304688,87.164063 C 30.731766,86.934905 31.216141,86.820321 31.757813,86.820313 C 32.783847,86.820321 33.622388,87.2448 34.273438,88.09375 C 34.92447,88.937507 35.249991,90.036464 35.25,91.390625 C 35.249991,92.734378 34.92447,93.820314 34.273438,94.648438 C 33.622388,95.476563 32.773431,95.890625 31.726563,95.890625 C 31.179682,95.890625 30.70312,95.776041 30.296875,95.546875 C 29.895829,95.317709 29.531246,94.953126 29.203125,94.453125 L 29.203125,95.601563 L 27.039063,95.601563 L 27.039063,84.09375 M 32.992188,91.296875 C 32.992181,90.51563 32.828118,89.903652 32.5,89.460938 C 32.171869,89.013027 31.721348,88.789069 31.148438,88.789063 C 30.544266,88.789069 30.075517,89.007819 29.742188,89.445313 C 29.414059,89.87761 29.249997,90.494797 29.25,91.296875 C 29.249997,92.161462 29.406247,92.817711 29.71875,93.265625 C 30.036454,93.713544 30.497391,93.937502 31.101563,93.9375 C 31.71614,93.937502 32.18489,93.713544 32.507813,93.265625 C 32.830722,92.812503 32.992181,92.156253 32.992188,91.296875" + id="text5427" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 789.76563,44.369141 L 792.57031,44.369141 C 793.23176,44.369143 793.71353,44.249351 794.01563,44.009766 C 794.3177,43.770185 794.46874,43.392581 794.46875,42.876953 C 794.46874,42.340499 794.3203,41.955083 794.02344,41.720703 C 793.72656,41.481125 793.23697,41.361333 792.55469,41.361328 L 789.76563,41.361328 L 789.76563,44.369141 M 789.76563,39.392578 L 792.46875,39.392578 C 793.05208,39.392585 793.47916,39.293627 793.75,39.095703 C 794.02083,38.892586 794.15624,38.574878 794.15625,38.142578 C 794.15624,37.720712 794.02343,37.416025 793.75781,37.228516 C 793.49739,37.035817 793.06249,36.939463 792.45313,36.939453 L 789.76563,36.939453 L 789.76563,39.392578 M 787.5,46.447266 L 787.5,34.939453 L 792.92188,34.939453 C 794.09895,34.939465 794.99478,35.189464 795.60938,35.689453 C 796.22916,36.184255 796.53905,36.905609 796.53906,37.853516 C 796.53905,38.436857 796.42447,38.923836 796.19531,39.314453 C 795.96614,39.705085 795.62239,40.007168 795.16406,40.220703 C 795.7578,40.460292 796.20051,40.806646 796.49219,41.259766 C 796.78905,41.707687 796.93749,42.267582 796.9375,42.939453 C 796.93749,44.059247 796.57291,44.92383 795.84375,45.533203 C 795.11457,46.142578 794.08072,46.447266 792.74219,46.447266 L 787.5,46.447266 M 803.45313,45.392578 C 803.16666,45.835287 802.79166,46.173828 802.32813,46.408203 C 801.86458,46.63737 801.32552,46.751953 800.71094,46.751953 C 799.88802,46.751953 799.2526,46.517578 798.80469,46.048828 C 798.36198,45.580079 798.14062,44.913413 798.14063,44.048828 C 798.14062,43.246748 798.36198,42.634769 798.80469,42.212891 C 799.2526,41.79102 799.98958,41.501958 801.01563,41.345703 C 801.25,41.30925 801.55729,41.267583 801.9375,41.220703 C 802.90104,41.095708 803.38281,40.817063 803.38281,40.384766 C 803.38281,40.041022 803.27604,39.796231 803.0625,39.650391 C 802.84895,39.499356 802.49218,39.423835 801.99219,39.423828 C 801.53385,39.423835 801.18229,39.514981 800.9375,39.697266 C 800.69271,39.879564 800.57031,40.13998 800.57031,40.478516 L 800.57031,40.603516 L 798.44531,40.603516 L 798.44531,40.447266 C 798.44531,39.577481 798.7526,38.89519 799.36719,38.400391 C 799.98177,37.900399 800.83073,37.650399 801.91406,37.650391 C 803.10156,37.650399 804.01041,37.856128 804.64063,38.267578 C 805.27603,38.679044 805.59374,39.272794 805.59375,40.048828 L 805.59375,44.876953 C 805.59374,45.231121 805.6302,45.496746 805.70313,45.673828 C 805.77603,45.845704 805.89843,45.975912 806.07031,46.064453 L 806.07031,46.447266 L 803.70313,46.447266 C 803.62499,46.301432 803.5651,46.139974 803.52344,45.962891 C 803.48176,45.785808 803.45833,45.595704 803.45313,45.392578 M 803.41406,42.267578 C 803.04427,42.439457 802.61718,42.577478 802.13281,42.681641 C 801.65364,42.785811 801.40625,42.840498 801.39063,42.845703 C 800.98958,42.96029 800.70833,43.103519 800.54688,43.275391 C 800.39062,43.447269 800.3125,43.684248 800.3125,43.986328 C 800.3125,44.29883 800.41406,44.54883 800.61719,44.736328 C 800.82031,44.918621 801.09375,45.009767 801.4375,45.009766 C 802.05208,45.009767 802.53385,44.837892 802.88281,44.494141 C 803.23697,44.145185 803.41406,43.671227 803.41406,43.072266 L 803.41406,42.267578 M 812.71875,43.244141 L 814.96094,43.244141 C 814.86718,44.322268 814.47395,45.173829 813.78125,45.798828 C 813.08854,46.423828 812.19791,46.736328 811.10938,46.736328 C 809.875,46.736328 808.90625,46.335287 808.20313,45.533203 C 807.50521,44.725913 807.15625,43.611331 807.15625,42.189453 C 807.15625,40.772792 807.51302,39.663418 808.22656,38.861328 C 808.94531,38.054045 809.93229,37.650399 811.1875,37.650391 C 812.28645,37.650399 813.16666,37.942066 813.82813,38.525391 C 814.49478,39.108731 814.86718,39.92123 814.94531,40.962891 L 812.6875,40.962891 C 812.62499,40.509772 812.46614,40.163418 812.21094,39.923828 C 811.95572,39.684252 811.61979,39.56446 811.20313,39.564453 C 810.64062,39.56446 810.21875,39.785814 809.9375,40.228516 C 809.66146,40.67123 809.52343,41.335292 809.52344,42.220703 C 809.52343,43.038415 809.66666,43.668623 809.95313,44.111328 C 810.24479,44.54883 810.66145,44.76758 811.20313,44.767578 C 811.62499,44.76758 811.96354,44.639976 812.21875,44.384766 C 812.47395,44.12956 812.64062,43.749352 812.71875,43.244141 M 816.44531,46.447266 L 816.44531,34.939453 L 818.65625,34.939453 L 818.65625,40.978516 L 821.35938,37.955078 L 824.09375,37.955078 L 821.13281,41.103516 L 824.27344,46.447266 L 821.54688,46.447266 L 819.51563,42.830078 L 818.65625,43.759766 L 818.65625,46.447266 L 816.44531,46.447266 M 824.79688,43.681641 L 827.0625,43.681641 C 827.08333,44.113935 827.23958,44.436851 827.53125,44.650391 C 827.82291,44.858726 828.26041,44.962892 828.84375,44.962891 C 829.28645,44.962892 829.6276,44.889976 829.86719,44.744141 C 830.11197,44.593101 830.23437,44.382164 830.23438,44.111328 C 830.23437,43.725914 829.78124,43.436852 828.875,43.244141 C 828.5052,43.166019 828.21093,43.098311 827.99219,43.041016 C 826.88802,42.759769 826.11979,42.426436 825.6875,42.041016 C 825.26042,41.655604 825.04687,41.134771 825.04688,40.478516 C 825.04687,39.608731 825.35937,38.921231 825.98438,38.416016 C 826.61458,37.905608 827.46614,37.650399 828.53906,37.650391 C 829.67447,37.650399 830.5651,37.903003 831.21094,38.408203 C 831.86197,38.913419 832.20833,39.624356 832.25,40.541016 L 830.03906,40.541016 C 830.02343,40.181647 829.88541,39.903001 829.625,39.705078 C 829.36979,39.507168 829.01302,39.40821 828.55469,39.408203 C 828.12239,39.40821 827.79948,39.473314 827.58594,39.603516 C 827.3776,39.733731 827.27343,39.929043 827.27344,40.189453 C 827.27343,40.528001 827.83854,40.82748 828.96875,41.087891 C 829.22916,41.145188 829.43489,41.192063 829.58594,41.228516 C 830.71614,41.494146 831.48697,41.814458 831.89844,42.189453 C 832.3151,42.564457 832.52343,43.093102 832.52344,43.775391 C 832.52343,44.738934 832.18228,45.473308 831.5,45.978516 C 830.82291,46.483724 829.83593,46.736328 828.53906,46.736328 C 827.36718,46.736328 826.45052,46.473307 825.78906,45.947266 C 825.1276,45.421225 824.79687,44.697267 824.79688,43.775391 L 824.79688,43.681641 M 840.02344,42.251953 C 840.02343,41.397792 839.86197,40.74675 839.53906,40.298828 C 839.21614,39.84571 838.74739,39.619147 838.13281,39.619141 C 837.52864,39.619147 837.0677,39.843106 836.75,40.291016 C 836.4375,40.738938 836.28125,41.392583 836.28125,42.251953 C 836.28125,43.05404 836.44531,43.673831 836.77344,44.111328 C 837.10677,44.54883 837.57552,44.76758 838.17969,44.767578 C 838.7526,44.76758 839.20312,44.543622 839.53125,44.095703 C 839.85937,43.647789 840.02343,43.033207 840.02344,42.251953 M 834.07031,49.853516 L 834.07031,37.955078 L 836.23438,37.955078 L 836.23438,39.103516 C 836.5625,38.603523 836.92708,38.23894 837.32813,38.009766 C 837.73437,37.780608 838.21093,37.666024 838.75781,37.666016 C 839.80468,37.666024 840.65364,38.080086 841.30469,38.908203 C 841.95572,39.731127 842.28124,40.814459 842.28125,42.158203 C 842.28124,43.517581 841.95572,44.621747 841.30469,45.470703 C 840.65364,46.314453 839.8151,46.736328 838.78906,46.736328 C 838.24739,46.736328 837.76302,46.621745 837.33594,46.392578 C 836.91406,46.163412 836.5625,45.830079 836.28125,45.392578 L 836.28125,49.853516 L 834.07031,49.853516 M 848.70313,45.392578 C 848.41666,45.835287 848.04166,46.173828 847.57813,46.408203 C 847.11458,46.63737 846.57552,46.751953 845.96094,46.751953 C 845.13802,46.751953 844.5026,46.517578 844.05469,46.048828 C 843.61198,45.580079 843.39062,44.913413 843.39063,44.048828 C 843.39062,43.246748 843.61198,42.634769 844.05469,42.212891 C 844.5026,41.79102 845.23958,41.501958 846.26563,41.345703 C 846.5,41.30925 846.80729,41.267583 847.1875,41.220703 C 848.15104,41.095708 848.63281,40.817063 848.63281,40.384766 C 848.63281,40.041022 848.52604,39.796231 848.3125,39.650391 C 848.09895,39.499356 847.74218,39.423835 847.24219,39.423828 C 846.78385,39.423835 846.43229,39.514981 846.1875,39.697266 C 845.94271,39.879564 845.82031,40.13998 845.82031,40.478516 L 845.82031,40.603516 L 843.69531,40.603516 L 843.69531,40.447266 C 843.69531,39.577481 844.0026,38.89519 844.61719,38.400391 C 845.23177,37.900399 846.08073,37.650399 847.16406,37.650391 C 848.35156,37.650399 849.26041,37.856128 849.89063,38.267578 C 850.52603,38.679044 850.84374,39.272794 850.84375,40.048828 L 850.84375,44.876953 C 850.84374,45.231121 850.8802,45.496746 850.95313,45.673828 C 851.02603,45.845704 851.14843,45.975912 851.32031,46.064453 L 851.32031,46.447266 L 848.95313,46.447266 C 848.87499,46.301432 848.8151,46.139974 848.77344,45.962891 C 848.73176,45.785808 848.70833,45.595704 848.70313,45.392578 M 848.66406,42.267578 C 848.29427,42.439457 847.86718,42.577478 847.38281,42.681641 C 846.90364,42.785811 846.65625,42.840498 846.64063,42.845703 C 846.23958,42.96029 845.95833,43.103519 845.79688,43.275391 C 845.64062,43.447269 845.5625,43.684248 845.5625,43.986328 C 845.5625,44.29883 845.66406,44.54883 845.86719,44.736328 C 846.07031,44.918621 846.34375,45.009767 846.6875,45.009766 C 847.30208,45.009767 847.78385,44.837892 848.13281,44.494141 C 848.48697,44.145185 848.66406,43.671227 848.66406,43.072266 L 848.66406,42.267578 M 857.96875,43.244141 L 860.21094,43.244141 C 860.11718,44.322268 859.72395,45.173829 859.03125,45.798828 C 858.33854,46.423828 857.44791,46.736328 856.35938,46.736328 C 855.125,46.736328 854.15625,46.335287 853.45313,45.533203 C 852.75521,44.725913 852.40625,43.611331 852.40625,42.189453 C 852.40625,40.772792 852.76302,39.663418 853.47656,38.861328 C 854.19531,38.054045 855.18229,37.650399 856.4375,37.650391 C 857.53645,37.650399 858.41666,37.942066 859.07813,38.525391 C 859.74478,39.108731 860.11718,39.92123 860.19531,40.962891 L 857.9375,40.962891 C 857.87499,40.509772 857.71614,40.163418 857.46094,39.923828 C 857.20572,39.684252 856.86979,39.56446 856.45313,39.564453 C 855.89062,39.56446 855.46875,39.785814 855.1875,40.228516 C 854.91146,40.67123 854.77343,41.335292 854.77344,42.220703 C 854.77343,43.038415 854.91666,43.668623 855.20313,44.111328 C 855.49479,44.54883 855.91145,44.76758 856.45313,44.767578 C 856.87499,44.76758 857.21354,44.639976 857.46875,44.384766 C 857.72395,44.12956 857.89062,43.749352 857.96875,43.244141 M 866.88281,43.869141 L 869.14844,43.869141 C 868.91926,44.764976 868.45572,45.4681 867.75781,45.978516 C 867.0651,46.483724 866.21874,46.736328 865.21875,46.736328 C 863.98958,46.736328 863.01562,46.32487 862.29688,45.501953 C 861.57812,44.67383 861.21875,43.554039 861.21875,42.142578 C 861.21875,40.751959 861.57292,39.655606 862.28125,38.853516 C 862.98958,38.051441 863.95833,37.650399 865.1875,37.650391 C 866.48958,37.650399 867.49478,38.046232 868.20313,38.837891 C 868.91145,39.624356 869.26562,40.74675 869.26563,42.205078 C 869.26562,42.366541 869.26301,42.488936 869.25781,42.572266 C 869.2578,42.650394 869.2526,42.725915 869.24219,42.798828 L 863.57031,42.798828 C 863.60156,43.465498 863.76302,43.968101 864.05469,44.306641 C 864.35156,44.645184 864.77604,44.814455 865.32813,44.814453 C 865.71874,44.814455 866.03906,44.738934 866.28906,44.587891 C 866.53906,44.431643 866.73697,44.19206 866.88281,43.869141 M 863.57031,41.306641 L 866.91406,41.306641 C 866.89322,40.73373 866.73958,40.298834 866.45313,40.001953 C 866.17187,39.699877 865.76562,39.548835 865.23438,39.548828 C 864.73958,39.548835 864.34895,39.699877 864.0625,40.001953 C 863.78125,40.304043 863.61718,40.738938 863.57031,41.306641" + id="text5207" /> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1" + d="M 840,17.646484 L 797.02608,17.646484" + id="path5439" /> + <path + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="M 802.5,25.146484 L 802.5,10.146484 L 787.5,17.646484 L 802.5,25.146484 z " + id="path5441" /> + <g + id="g5459" + transform="translate(0,7.5)"> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" + d="M 82.50003,75 L 54.020182,75" + id="path5453" /> + <path + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z " + id="path5455" /> + <path + id="path5457" + d="M 45,67.5 C 45,82.5 45,82.5 45,82.5" + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> + </g> + <g + id="g5464" + transform="matrix(-1,9.581637e-17,-9.581637e-17,-1,127.5,172.5)"> + <path + id="path5466" + d="M 82.50003,75 L 54.020182,75" + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> + <path + id="path5468" + d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z " + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" /> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" + d="M 45,67.5 C 45,82.5 45,82.5 45,82.5" + id="path5470" /> + </g> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 107.0625,80.560547 L 105.23438,78.779297 L 107.17969,76.763672 L 109.05469,78.591797 C 109.30467,78.123052 109.49608,77.587897 109.62891,76.986328 C 109.7617,76.384773 109.82811,75.728524 109.82813,75.017578 C 109.82811,73.119151 109.40233,71.646496 108.55078,70.599609 C 107.69921,69.544936 106.5078,69.017593 104.97656,69.017578 C 103.46093,69.017593 102.28124,69.54103 101.4375,70.587891 C 100.59374,71.634778 100.17187,73.111339 100.17188,75.017578 C 100.17187,76.916022 100.59374,78.392583 101.4375,79.447266 C 102.28124,80.494144 103.46093,81.017581 104.97656,81.017578 C 105.36718,81.017581 105.73436,80.978518 106.07813,80.900391 C 106.42968,80.822268 106.7578,80.708987 107.0625,80.560547 M 109.55859,82.916016 C 108.97264,83.306641 108.28905,83.603516 107.50781,83.806641 C 106.73436,84.009765 105.89061,84.111328 104.97656,84.111328 C 102.39843,84.111328 100.34765,83.291016 98.824219,81.650391 C 97.308592,80.009769 96.55078,77.798834 96.550781,75.017578 C 96.55078,72.228527 97.308592,70.017592 98.824219,68.384766 C 100.34765,66.744158 102.39843,65.923846 104.97656,65.923828 C 107.55468,65.923846 109.60545,66.744158 111.12891,68.384766 C 112.66014,70.025404 113.42576,72.23634 113.42578,75.017578 C 113.42576,76.236336 113.26951,77.353522 112.95703,78.369141 C 112.64451,79.376957 112.18358,80.259769 111.57422,81.017578 L 113.44922,82.810547 L 111.52734,84.826172 L 109.55859,82.916016" + id="text5474" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 158.94141,83.630859 L 153.99609,66.369141 L 157.67578,66.369141 L 160.62891,78.544922 L 163.125,66.369141 L 166.91016,66.369141 L 169.40625,78.544922 L 172.35938,66.369141 L 176.00391,66.369141 L 171.07031,83.630859 L 167.68359,83.630859 L 165.01172,70.412109 L 162.32813,83.630859 L 158.94141,83.630859" + id="text5482" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 218.52539,83.630859 L 218.52539,66.369141 L 231.05273,66.369141 L 231.05273,69.369141 L 222.0293,69.369141 L 222.0293,73.048828 L 230.2793,73.048828 L 230.2793,76.001953 L 222.0293,76.001953 L 222.0293,80.443359 L 231.47461,80.443359 L 231.47461,83.630859 L 218.52539,83.630859" + id="text5492" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 281.4375,73.916016 L 285.60938,73.916016 C 286.51561,73.916025 287.17968,73.732432 287.60156,73.365234 C 288.03124,72.998058 288.24608,72.419933 288.24609,71.630859 C 288.24608,70.880872 288.03905,70.314466 287.625,69.931641 C 287.21093,69.54103 286.59374,69.345717 285.77344,69.345703 L 281.4375,69.345703 L 281.4375,73.916016 M 277.88672,83.630859 L 277.88672,66.369141 L 286.25391,66.369141 C 288.13671,66.369158 289.53124,66.771501 290.4375,67.576172 C 291.34373,68.380875 291.79686,69.611342 291.79688,71.267578 C 291.79686,72.322277 291.5742,73.201182 291.12891,73.904297 C 290.69139,74.607431 290.05858,75.087899 289.23047,75.345703 C 289.98045,75.611336 290.5117,76.017586 290.82422,76.564453 C 291.14452,77.111335 291.32811,77.962896 291.375,79.119141 L 291.44531,81.158203 C 291.4453,81.173831 291.4453,81.197268 291.44531,81.228516 C 291.46873,82.259767 291.69139,82.884766 292.11328,83.103516 L 292.11328,83.630859 L 288.22266,83.630859 C 288.09764,83.388672 287.99999,83.091797 287.92969,82.740234 C 287.86718,82.380861 287.82811,81.95508 287.8125,81.462891 L 287.76563,79.646484 C 287.72655,78.576177 287.52343,77.853521 287.15625,77.478516 C 286.79686,77.103522 286.14452,76.916022 285.19922,76.916016 L 281.4375,76.916016 L 281.4375,83.630859 L 277.88672,83.630859" + id="text5500" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 343.24219,83.630859 L 343.24219,69.451172 L 338.12109,69.451172 L 338.12109,66.369141 L 351.87891,66.369141 L 351.87891,69.451172 L 346.79297,69.451172 L 346.79297,83.630859 L 343.24219,83.630859" + id="text5504" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 407.06836,83.630859 L 403.51758,83.630859 L 403.51758,77.197266 L 397.24805,66.369141 L 401.5957,66.369141 L 405.28711,73.810547 L 408.69727,66.369141 L 412.75195,66.369141 L 407.06836,77.197266 L 407.06836,83.630859" + id="text5518" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 458.08594,66.105469 L 461.67188,66.105469 L 461.67188,76.933594 C 461.67187,78.269536 461.93749,79.246098 462.46875,79.863281 C 462.99999,80.472659 463.84374,80.777346 465,80.777344 C 466.17187,80.777346 467.02343,80.472659 467.55469,79.863281 C 468.09374,79.25391 468.36327,78.277349 468.36328,76.933594 L 468.36328,66.105469 L 471.91406,66.105469 L 471.91406,77.320313 C 471.91405,79.437504 471.3203,81.062502 470.13281,82.195313 C 468.95311,83.328125 467.24999,83.894531 465.02344,83.894531 C 462.78124,83.894531 461.0625,83.332031 459.86719,82.207031 C 458.67969,81.074221 458.08594,79.445316 458.08594,77.320313 L 458.08594,66.105469" + id="text5522" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 523.22461,83.630859 L 523.22461,66.369141 L 526.77539,66.369141 L 526.77539,83.630859 L 523.22461,83.630859" + id="text5526" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 580.18359,75 C 580.18359,76.898444 580.60546,78.375005 581.44922,79.429688 C 582.29296,80.476566 583.47265,81.000003 584.98828,81 C 586.51952,81.000003 587.71093,80.476566 588.5625,79.429688 C 589.41405,78.375005 589.83983,76.898444 589.83984,75 C 589.83983,73.101573 589.41405,71.628918 588.5625,70.582031 C 587.71093,69.527358 586.51952,69.000015 584.98828,69 C 583.47265,69.000015 582.29296,69.523452 581.44922,70.570313 C 580.60546,71.617199 580.18359,73.093761 580.18359,75 M 576.5625,75 C 576.5625,72.210949 577.32031,70.000014 578.83594,68.367188 C 580.35937,66.726579 582.41015,65.906268 584.98828,65.90625 C 587.56639,65.906268 589.61717,66.726579 591.14063,68.367188 C 592.67186,70.007826 593.43748,72.218761 593.4375,75 C 593.43748,77.781256 592.67186,79.992191 591.14063,81.632813 C 589.61717,83.273438 587.56639,84.09375 584.98828,84.09375 C 582.41015,84.09375 580.35937,83.273438 578.83594,81.632813 C 577.32031,79.992191 576.5625,77.781256 576.5625,75" + id="text5530" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 641.97656,74.361328 L 645.41016,74.361328 C 646.33983,74.361337 647.01561,74.166025 647.4375,73.775391 C 647.85936,73.376963 648.0703,72.740245 648.07031,71.865234 C 648.0703,71.044934 647.86327,70.423841 647.44922,70.001953 C 647.03515,69.580092 646.41796,69.369155 645.59766,69.369141 L 641.97656,69.369141 L 641.97656,74.361328 M 641.95313,77.490234 L 641.95313,83.630859 L 638.40234,83.630859 L 638.40234,66.369141 L 646.07813,66.369141 C 647.89061,66.369158 649.26171,66.841814 650.19141,67.787109 C 651.12889,68.724624 651.59764,70.103529 651.59766,71.923828 C 651.59764,73.705088 651.14061,75.080087 650.22656,76.048828 C 649.31249,77.009772 648.0078,77.490241 646.3125,77.490234 L 641.95313,77.490234" + id="text5534" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 709.24805,63.919922 L 709.24805,66.369141 C 709.17772,66.369155 709.08007,66.365249 708.95508,66.357422 C 708.83007,66.349624 708.74413,66.345718 708.69727,66.345703 C 707.90819,66.345718 707.37304,66.498062 707.0918,66.802734 C 706.81835,67.099624 706.68163,67.732435 706.68164,68.701172 L 706.68164,71.513672 C 706.68163,72.66993 706.50585,73.490242 706.1543,73.974609 C 705.80273,74.458991 705.16992,74.806647 704.25586,75.017578 C 705.16992,75.228522 705.80273,75.572271 706.1543,76.048828 C 706.50585,76.525395 706.68163,77.341801 706.68164,78.498047 L 706.68164,81.322266 C 706.68163,82.283202 706.81835,82.912108 707.0918,83.208984 C 707.36523,83.505857 707.90038,83.654294 708.69727,83.654297 C 708.74413,83.654294 708.83007,83.650388 708.95508,83.642578 C 709.08007,83.634763 709.17772,83.630857 709.24805,83.630859 L 709.24805,86.080078 C 709.13866,86.080073 708.98632,86.08398 708.79102,86.091797 C 708.59569,86.099605 708.45116,86.103511 708.35742,86.103516 C 707.57616,86.103511 706.92382,86.056636 706.40039,85.962891 C 705.87695,85.869136 705.43163,85.724605 705.06445,85.529297 C 704.61913,85.263668 704.30273,84.904293 704.11523,84.451172 C 703.93554,84.005857 703.8457,83.228514 703.8457,82.119141 L 703.8457,79.166016 C 703.8457,78.095706 703.64648,77.337895 703.24805,76.892578 C 702.84961,76.439458 702.17773,76.212896 701.23242,76.212891 C 701.18554,76.212896 701.10742,76.216802 700.99805,76.224609 C 700.88867,76.232427 700.80664,76.236333 700.75195,76.236328 L 700.75195,73.787109 C 700.80664,73.787117 700.88867,73.791023 700.99805,73.798828 C 701.10742,73.806648 701.18554,73.810554 701.23242,73.810547 C 702.16992,73.810554 702.83789,73.583992 703.23633,73.130859 C 703.64257,72.677743 703.8457,71.912119 703.8457,70.833984 L 703.8457,67.904297 C 703.8457,66.787124 703.93554,66.001968 704.11523,65.548828 C 704.30273,65.095719 704.61913,64.736345 705.06445,64.470703 C 705.43163,64.275408 705.87695,64.130876 706.40039,64.037109 C 706.92382,63.943377 707.57616,63.896502 708.35742,63.896484 C 708.45116,63.896502 708.59569,63.900408 708.79102,63.908203 C 708.98632,63.916033 709.13866,63.919939 709.24805,63.919922 M 703.0957,93.966797 L 709.01367,93.966797 L 709.01367,96.462891 L 706.25977,96.462891 L 706.25977,113.8418 L 709.01367,113.8418 L 709.01367,116.33789 L 703.0957,116.33789 L 703.0957,93.966797" + id="text5546" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 760.75195,63.908203 L 761.54883,63.908203 C 762.4082,63.90822 763.09961,63.955095 763.62305,64.048828 C 764.14648,64.142595 764.58398,64.291033 764.93555,64.494141 C 765.38085,64.744157 765.69335,65.103532 765.87305,65.572266 C 766.06054,66.033218 766.15429,66.806655 766.1543,67.892578 L 766.1543,70.845703 C 766.15429,71.916025 766.35351,72.677743 766.75195,73.130859 C 767.15038,73.57618 767.82226,73.798836 768.76758,73.798828 C 768.81444,73.798836 768.89257,73.794929 769.00195,73.787109 C 769.11132,73.779304 769.19335,73.775398 769.24805,73.775391 L 769.24805,76.224609 L 768.81445,76.224609 C 767.83788,76.224614 767.15038,76.443364 766.75195,76.880859 C 766.35351,77.318363 766.15429,78.076175 766.1543,79.154297 L 766.1543,82.107422 C 766.15429,83.224607 766.06054,84.009763 765.87305,84.462891 C 765.69335,84.916012 765.38085,85.267574 764.93555,85.517578 C 764.56835,85.712886 764.12304,85.857417 763.59961,85.951172 C 763.07617,86.044917 762.42382,86.091792 761.64258,86.091797 C 761.54883,86.091792 761.40429,86.087886 761.20898,86.080078 C 761.01367,86.072261 760.86133,86.068355 760.75195,86.068359 L 760.75195,83.619141 C 760.82226,83.619138 760.91992,83.623044 761.04492,83.630859 C 761.16992,83.638669 761.25586,83.642576 761.30273,83.642578 C 762.09179,83.642576 762.62304,83.490232 762.89648,83.185547 C 763.17773,82.88867 763.31836,82.263671 763.31836,81.310547 L 763.31836,78.509766 C 763.31836,77.337895 763.49414,76.513677 763.8457,76.037109 C 764.19726,75.55274 764.83007,75.20899 765.74414,75.005859 C 764.83007,74.794928 764.19726,74.447272 763.8457,73.962891 C 763.49414,73.478523 763.31836,72.658212 763.31836,71.501953 L 763.31836,68.666016 C 763.31836,67.712904 763.17773,67.087905 762.89648,66.791016 C 762.62304,66.486343 762.09179,66.333999 761.30273,66.333984 C 761.25586,66.333999 761.16992,66.337906 761.04492,66.345703 C 760.91992,66.35353 760.82226,66.357437 760.75195,66.357422 L 760.75195,63.908203 M 767.00977,93.955078 L 767.00977,116.32617 L 761.08008,116.32617 L 761.08008,113.83008 L 763.8457,113.83008 L 763.8457,96.451172 L 761.08008,96.451172 L 761.08008,93.955078 L 767.00977,93.955078" + id="text5554" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 823.79883,62.977287 L 826.21289,62.977287 L 826.21289,86.977287 L 823.79883,86.977287 L 823.79883,62.977287 M 827.10352,113.54369 L 821.29102,93.6101 L 822.87305,93.6101 L 828.70898,113.54369 L 827.10352,113.54369" + id="text5564" /> + <g + id="g3597"> + <path + id="text5570" + d="M 22.996094,139.10156 C 22.907541,140.40886 22.403635,141.44792 21.484375,142.21875 C 20.565095,142.98958 19.365878,143.375 17.886719,143.375 C 16.183589,143.375 14.859372,142.84375 13.914063,141.78125 C 12.968749,140.71875 12.496093,139.22917 12.496094,137.3125 C 12.496093,135.35417 12.977863,133.85418 13.941406,132.8125 C 14.904945,131.77084 16.29036,131.25001 18.097656,131.25 C 19.566398,131.25001 20.726554,131.60808 21.578125,132.32422 C 22.429677,133.04037 22.897124,134.05209 22.980469,135.35938 L 20.644531,135.35938 C 20.545564,134.70834 20.279939,134.21225 19.847656,133.87109 C 19.415357,133.52996 18.832024,133.35938 18.097656,133.35938 C 17.055984,133.35938 16.264318,133.69532 15.722656,134.36719 C 15.180986,135.03907 14.910153,136.02084 14.910156,137.3125 C 14.910153,138.5625 15.179684,139.52865 15.71875,140.21094 C 16.257808,140.89323 17.024734,141.23438 18.019531,141.23438 C 18.738274,141.23438 19.326815,141.05078 19.785156,140.68359 C 20.243481,140.31641 20.540356,139.78907 20.675781,139.10156 L 22.996094,139.10156 z M 29.558594,142 C 29.27213,142.44271 28.89713,142.77995 28.433594,143.01172 C 27.970048,143.24349 27.430986,143.35937 26.816406,143.35938 C 25.993487,143.35937 25.359373,143.125 24.914063,142.65625 C 24.468749,142.1875 24.246093,141.52083 24.246094,140.65625 C 24.246093,139.85417 24.468749,139.24219 24.914063,138.82031 C 25.359373,138.39844 26.09505,138.10938 27.121094,137.95313 C 27.355465,137.91667 27.662756,137.87501 28.042969,137.82813 C 29.006505,137.70313 29.488275,137.42448 29.488281,136.99219 C 29.488275,136.64844 29.381505,136.40235 29.167969,136.25391 C 28.954422,136.10548 28.597651,136.03126 28.097656,136.03125 C 27.639319,136.03126 27.287757,136.1224 27.042969,136.30469 C 26.798174,136.48699 26.675778,136.7474 26.675781,137.08594 L 26.675781,137.21094 L 24.550781,137.21094 L 24.550781,137.05469 C 24.55078,136.1849 24.858072,135.50131 25.472656,135.00391 C 26.087237,134.50652 26.936195,134.25782 28.019531,134.25781 C 29.207026,134.25782 30.117181,134.46355 30.75,134.875 C 31.382805,135.28647 31.699211,135.88022 31.699219,136.65625 L 31.699219,141.48438 C 31.699211,141.83854 31.735669,142.10287 31.808594,142.27734 C 31.881502,142.45182 32.003898,142.58333 32.175781,142.67188 L 32.175781,143.05469 L 29.808594,143.05469 C 29.730463,142.90885 29.670567,142.7474 29.628906,142.57031 C 29.587234,142.39323 29.563796,142.20313 29.558594,142 L 29.558594,142 z M 29.519531,138.875 C 29.149734,139.04688 28.723953,139.1849 28.242188,139.28906 C 27.760413,139.39323 27.511715,139.44792 27.496094,139.45313 C 27.095049,139.56771 26.815101,139.71094 26.65625,139.88281 C 26.497393,140.05469 26.417966,140.29167 26.417969,140.59375 C 26.417966,140.90625 26.519528,141.15495 26.722656,141.33984 C 26.925778,141.52474 27.199215,141.61719 27.542969,141.61719 C 28.157548,141.61719 28.64062,141.44401 28.992188,141.09766 C 29.343744,140.7513 29.519525,140.27865 29.519531,139.67969 L 29.519531,138.875 z M 39.691406,138.85938 C 39.691399,138.00521 39.529941,137.35287 39.207031,136.90234 C 38.884108,136.45183 38.415359,136.22657 37.800781,136.22656 C 37.19661,136.22657 36.736975,136.45053 36.421875,136.89844 C 36.106767,137.34636 35.949216,138.00001 35.949219,138.85938 C 35.949216,139.66146 36.11458,140.28125 36.445313,140.71875 C 36.776038,141.15625 37.243485,141.375 37.847656,141.375 C 38.420567,141.375 38.871088,141.15104 39.199219,140.70313 C 39.527337,140.25521 39.691399,139.64063 39.691406,138.85938 L 39.691406,138.85938 z M 33.738281,146.46094 L 33.738281,134.5625 L 35.902344,134.5625 L 35.902344,135.71094 C 36.230465,135.21095 36.59635,134.84636 37,134.61719 C 37.403641,134.38803 37.878901,134.27345 38.425781,134.27344 C 39.472649,134.27345 40.321607,134.68621 40.972656,135.51172 C 41.623689,136.33725 41.94921,137.42188 41.949219,138.76563 C 41.94921,140.125 41.623689,141.22787 40.972656,142.07422 C 40.321607,142.92057 39.483066,143.34375 38.457031,143.34375 C 37.915359,143.34375 37.432287,143.22917 37.007813,143 C 36.583329,142.77083 36.230465,142.4375 35.949219,142 L 35.949219,146.46094 L 33.738281,146.46094 z M 43.027344,140.28906 L 45.292969,140.28906 C 45.313799,140.72136 45.470049,141.04297 45.761719,141.25391 C 46.053382,141.46485 46.490881,141.57031 47.074219,141.57031 C 47.516922,141.57031 47.85937,141.4961 48.101563,141.34766 C 48.343744,141.19922 48.464838,140.98959 48.464844,140.71875 C 48.464838,140.33334 48.011713,140.04427 47.105469,139.85156 C 46.735673,139.77344 46.441402,139.70573 46.222656,139.64844 C 45.118487,139.36719 44.351561,139.03386 43.921875,138.64844 C 43.492187,138.26303 43.277343,137.74219 43.277344,137.08594 C 43.277343,136.21615 43.591145,135.52735 44.21875,135.01953 C 44.846352,134.51173 45.696611,134.25782 46.769531,134.25781 C 47.904943,134.25782 48.796869,134.51043 49.445313,135.01563 C 50.093742,135.52084 50.438794,136.23178 50.480469,137.14844 L 48.269531,137.14844 C 48.253901,136.78907 48.117182,136.51042 47.859375,136.3125 C 47.601557,136.11459 47.243485,136.01563 46.785156,136.01563 C 46.352861,136.01563 46.031246,136.08074 45.820313,136.21094 C 45.609372,136.34115 45.503903,136.53646 45.503906,136.79688 C 45.503903,137.13542 46.069007,137.4349 47.199219,137.69531 C 47.45963,137.75261 47.665359,137.79948 47.816406,137.83594 C 48.946608,138.10157 49.718743,138.42188 50.132813,138.79688 C 50.546867,139.17188 50.753898,139.70052 50.753906,140.38281 C 50.753898,141.34636 50.414055,142.08073 49.734375,142.58594 C 49.054681,143.09115 48.066401,143.34375 46.769531,143.34375 C 45.597653,143.34375 44.680987,143.08073 44.019531,142.55469 C 43.358072,142.02865 43.027343,141.30469 43.027344,140.38281 L 43.027344,140.28906 z M 57.011719,143.05469 L 57.011719,131.54688 L 59.378906,131.54688 L 59.378906,140.92969 L 64.996094,140.92969 L 64.996094,143.05469 L 57.011719,143.05469 z M 67.972656,138.79688 C 67.972653,139.64063 68.14583,140.29167 68.492188,140.75 C 68.838538,141.20834 69.332027,141.4375 69.972656,141.4375 C 70.602859,141.4375 71.09114,141.20834 71.4375,140.75 C 71.783847,140.29167 71.957024,139.64063 71.957031,138.79688 C 71.957024,137.95834 71.78515,137.3112 71.441406,136.85547 C 71.09765,136.39975 70.608067,136.17188 69.972656,136.17188 C 69.332027,136.17188 68.838538,136.39975 68.492188,136.85547 C 68.14583,137.3112 67.972653,137.95834 67.972656,138.79688 L 67.972656,138.79688 z M 65.667969,138.79688 C 65.667968,137.38542 66.05078,136.27605 66.816406,135.46875 C 67.582029,134.66147 68.634111,134.25782 69.972656,134.25781 C 71.305983,134.25782 72.356764,134.66147 73.125,135.46875 C 73.89322,136.27605 74.277335,137.38542 74.277344,138.79688 C 74.277335,140.21354 73.89322,141.32552 73.125,142.13281 C 72.356764,142.9401 71.305983,143.34375 69.972656,143.34375 C 68.634111,143.34375 67.582029,142.9401 66.816406,142.13281 C 66.05078,141.32552 65.667968,140.21354 65.667969,138.79688 L 65.667969,138.79688 z M 80.949219,139.85156 L 83.191406,139.85156 C 83.097648,140.92969 82.704419,141.78125 82.011719,142.40625 C 81.319004,143.03125 80.42838,143.34375 79.339844,143.34375 C 78.105465,143.34375 77.138019,142.94141 76.4375,142.13672 C 75.736978,141.33203 75.386718,140.21875 75.386719,138.79688 C 75.386718,137.38021 75.744791,136.26954 76.460938,135.46484 C 77.177081,134.66016 78.162757,134.25782 79.417969,134.25781 C 80.516921,134.25782 81.398431,134.54949 82.0625,135.13281 C 82.726555,135.71615 83.097648,136.52865 83.175781,137.57031 L 80.917969,137.57031 C 80.855463,137.11719 80.696609,136.77084 80.441406,136.53125 C 80.186193,136.29167 79.850255,136.17188 79.433594,136.17188 C 78.87109,136.17188 78.450517,136.39324 78.171875,136.83594 C 77.893226,137.27865 77.753903,137.94271 77.753906,138.82813 C 77.753903,139.64584 77.898434,140.27474 78.1875,140.71484 C 78.476559,141.15495 78.891923,141.375 79.433594,141.375 C 79.855464,141.375 80.194005,141.2474 80.449219,140.99219 C 80.704421,140.73698 80.871088,140.35677 80.949219,139.85156 L 80.949219,139.85156 z M 84.675781,143.05469 L 84.675781,131.54688 L 86.886719,131.54688 L 86.886719,137.58594 L 89.589844,134.5625 L 92.324219,134.5625 L 89.363281,137.71094 L 92.503906,143.05469 L 89.777344,143.05469 L 87.746094,139.4375 L 86.886719,140.36719 L 86.886719,143.05469 L 84.675781,143.05469 z " + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" /> + <path + id="path5584" + d="M 23.746094,146.25 L 12.496094,161.25 L 19.996094,161.25 L 19.996094,168.75 L 27.496094,168.75 L 27.496094,161.25 L 34.996094,161.25 L 23.746094,146.25 z M 22.714844,150.46875 L 24.746094,150.46875 L 27.871094,159.09375 L 25.996094,159.09375 L 25.402344,157.3125 L 22.058594,157.3125 L 21.496094,159.09375 L 19.621094,159.09375 L 22.714844,150.46875 z M 23.746094,152.1875 L 22.527344,155.84375 L 24.933594,155.84375 L 23.746094,152.1875 z " + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" /> + </g> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 119.9707,129.82617 L 117.58008,137.17383 L 122.37305,137.17383 L 119.9707,129.82617 M 117.9082,126.36914 L 122.00977,126.36914 L 128.23242,143.63086 L 124.50586,143.63086 L 123.33398,140.08008 L 116.64258,140.08008 L 115.50586,143.63086 L 111.76758,143.63086 L 117.9082,126.36914" + id="text5641" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 172.98047,138.29297 L 176.48438,138.29297 C 176.61718,139.23829 177.0039,139.94141 177.64453,140.40234 C 178.28515,140.85547 179.21093,141.08203 180.42188,141.08203 C 181.45312,141.08203 182.23046,140.89844 182.75391,140.53125 C 183.27733,140.16407 183.53905,139.6211 183.53906,138.90234 C 183.53905,137.85547 182.03515,136.98829 179.02734,136.30078 C 178.98827,136.29298 178.95312,136.28516 178.92188,136.27734 C 178.84374,136.26173 178.72265,136.23438 178.55859,136.19531 C 176.94921,135.84376 175.80078,135.44923 175.11328,135.01172 C 174.5039,134.6211 174.03906,134.09767 173.71875,133.44141 C 173.39844,132.77735 173.23828,131.99611 173.23828,131.09766 C 173.23828,129.41798 173.80859,128.13283 174.94922,127.24219 C 176.08984,126.34377 177.73828,125.89455 179.89453,125.89453 C 181.91015,125.89455 183.48436,126.37111 184.61719,127.32422 C 185.7578,128.27736 186.35936,129.62111 186.42188,131.35547 L 183.01172,131.35547 C 182.94921,130.51954 182.6289,129.88283 182.05078,129.44531 C 181.47265,129.00783 180.64843,128.78908 179.57813,128.78906 C 178.64843,128.78908 177.92968,128.97267 177.42188,129.33984 C 176.92187,129.69923 176.67187,130.21486 176.67188,130.88672 C 176.67187,131.80079 177.65234,132.48439 179.61328,132.9375 C 180.14452,133.06251 180.55859,133.16017 180.85547,133.23047 C 182.11327,133.55079 183.0039,133.80079 183.52734,133.98047 C 184.05858,134.16017 184.51952,134.35938 184.91016,134.57813 C 185.61327,134.96876 186.14061,135.48829 186.49219,136.13672 C 186.84374,136.77735 187.01952,137.54688 187.01953,138.44531 C 187.01952,140.24219 186.41405,141.63672 185.20313,142.62891 C 183.99218,143.61328 182.28515,144.10547 180.08203,144.10547 C 177.91015,144.10547 176.20703,143.60156 174.97266,142.59375 C 173.73828,141.58594 173.07422,140.15235 172.98047,138.29297" + id="text5645" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 236.16211,140.51367 L 239.00977,140.51367 C 240.65819,140.51367 241.8496,140.08399 242.58398,139.22461 C 243.32616,138.35743 243.69725,136.95508 243.69727,135.01758 C 243.69725,133.0879 243.3535,131.66993 242.66602,130.76367 C 241.9785,129.85744 240.90429,129.40431 239.44336,129.4043 L 236.16211,129.4043 L 236.16211,140.51367 M 232.68164,143.63086 L 232.68164,126.36914 L 239.44336,126.36914 C 242.09179,126.36916 244.06444,127.084 245.36133,128.51367 C 246.666,129.94337 247.31834,132.11134 247.31836,135.01758 C 247.31834,136.59571 247.07616,137.98633 246.5918,139.18945 C 246.11522,140.39258 245.41991,141.36133 244.50586,142.0957 C 243.81835,142.64258 243.0371,143.03711 242.16211,143.2793 C 241.2871,143.51367 240.06054,143.63086 238.48242,143.63086 L 232.68164,143.63086" + id="text5649" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 293.97656,143.63086 L 293.97656,126.36914 L 306.02344,126.36914 L 306.02344,129.36914 L 297.48047,129.36914 L 297.48047,133.2832 L 304.96875,133.2832 L 304.96875,136.2832 L 297.48047,136.2832 L 297.48047,143.63086 L 293.97656,143.63086" + id="text5653" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 365.17969,141.57422 C 364.53905,142.44141 363.80858,143.07813 362.98828,143.48438 C 362.17577,143.89062 361.21874,144.09375 360.11719,144.09375 C 357.70312,144.09375 355.74609,143.25781 354.24609,141.58594 C 352.7539,139.90625 352.00781,137.70313 352.00781,134.97656 C 352.00781,132.22657 352.7539,130.02736 354.24609,128.37891 C 355.73828,126.73049 357.72656,125.90627 360.21094,125.90625 C 362.37499,125.90627 364.14061,126.4258 365.50781,127.46484 C 366.87498,128.49611 367.68748,129.91798 367.94531,131.73047 L 364.32422,131.73047 C 364.10546,130.83204 363.65624,130.14845 362.97656,129.67969 C 362.30468,129.21095 361.42577,128.97658 360.33984,128.97656 C 358.89452,128.97658 357.75781,129.50783 356.92969,130.57031 C 356.10937,131.62501 355.69921,133.08595 355.69922,134.95313 C 355.69921,136.82813 356.1289,138.29688 356.98828,139.35938 C 357.84765,140.42188 359.02734,140.95313 360.52734,140.95313 C 361.65233,140.95313 362.59374,140.6211 363.35156,139.95703 C 364.10936,139.29297 364.57811,138.38282 364.75781,137.22656 L 360.84375,137.22656 L 360.84375,134.27344 L 367.99219,134.27344 L 367.99219,143.61328 L 365.61328,143.61328 L 365.17969,141.57422" + id="text5657" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 412.86328,143.63086 L 412.86328,126.36914 L 416.4375,126.36914 L 416.4375,132.80273 L 423.5625,132.80273 L 423.5625,126.36914 L 427.13672,126.36914 L 427.13672,143.63086 L 423.5625,143.63086 L 423.5625,135.97852 L 416.4375,135.97852 L 416.4375,143.63086 L 412.86328,143.63086" + id="text5661" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 474.48047,136.95703 L 477.91406,136.95703 L 477.91406,139.04297 C 477.91406,139.64453 478.09375,140.10547 478.45313,140.42578 C 478.8125,140.73828 479.32812,140.89453 480,140.89453 C 480.73437,140.89453 481.24609,140.70313 481.53516,140.32031 C 481.82421,139.9375 481.96874,139.21875 481.96875,138.16406 L 481.96875,126.12891 L 485.51953,126.12891 L 485.51953,138.32813 C 485.51952,139.42188 485.45311,140.22657 485.32031,140.74219 C 485.1953,141.25 484.98436,141.69922 484.6875,142.08984 C 484.23436,142.66797 483.61327,143.10938 482.82422,143.41406 C 482.03515,143.71875 481.10937,143.87109 480.04688,143.87109 C 479.07031,143.87109 478.20703,143.73828 477.45703,143.47266 C 476.70703,143.20703 476.08203,142.8125 475.58203,142.28906 C 475.18359,141.86719 474.89844,141.39844 474.72656,140.88281 C 474.5625,140.35938 474.48047,139.5 474.48047,138.30469 L 474.48047,136.95703" + id="text5665" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 532.32422,143.63086 L 532.32422,126.36914 L 535.875,126.36914 L 535.875,133.45898 L 542.61328,126.36914 L 547.05469,126.36914 L 540.16406,133.35352 L 547.67578,143.63086 L 543.33984,143.63086 L 537.71484,135.73242 L 535.875,137.56055 L 535.875,143.63086 L 532.32422,143.63086" + id="text5669" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 594.01172,143.63086 L 594.01172,126.36914 L 597.5625,126.36914 L 597.5625,140.44336 L 605.98828,140.44336 L 605.98828,143.63086 L 594.01172,143.63086" + id="text5673" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 143.15039,203.63086 L 143.15039,200.63086 L 152.53711,189.49805 L 143.33789,189.49805 L 143.33789,186.36914 L 156.84961,186.36914 L 156.84961,189.36914 L 147.43945,200.51367 L 156.63867,200.51367 L 156.63867,203.63086 L 143.15039,203.63086" + id="text5679" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 202.37109,203.63086 L 207.79688,194.81836 L 202.37109,186.36914 L 206.47266,186.36914 L 210,192.4043 L 213.50391,186.36914 L 217.62891,186.36914 L 212.20313,194.79492 L 217.62891,203.63086 L 213.52734,203.63086 L 210,197.6543 L 206.47266,203.63086 L 202.37109,203.63086" + id="text5683" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 277.875,197.68359 C 277.74217,199.64454 276.98436,201.20313 275.60156,202.35938 C 274.22655,203.51563 272.42968,204.09375 270.21094,204.09375 C 267.65624,204.09375 265.66796,203.29688 264.24609,201.70313 C 262.83203,200.10938 262.125,197.87501 262.125,195 C 262.125,192.06251 262.84765,189.81251 264.29297,188.25 C 265.73828,186.68752 267.8164,185.90627 270.52734,185.90625 C 272.73046,185.90627 274.46874,186.44533 275.74219,187.52344 C 277.02342,188.59377 277.72655,190.10939 277.85156,192.07031 L 274.34766,192.07031 C 274.19921,191.09376 273.80077,190.35158 273.15234,189.84375 C 272.50389,189.32814 271.6289,189.07033 270.52734,189.07031 C 268.96484,189.07033 267.77734,189.57423 266.96484,190.58203 C 266.15234,191.58986 265.74609,193.06251 265.74609,195 C 265.74609,196.87501 266.14843,198.32422 266.95313,199.34766 C 267.76562,200.3711 268.91796,200.88282 270.41016,200.88281 C 271.48827,200.88282 272.37108,200.60938 273.05859,200.0625 C 273.74608,199.50782 274.19139,198.71485 274.39453,197.68359 L 277.875,197.68359" + id="text5687" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 328.33594,203.63086 L 322.38281,186.36914 L 326.32031,186.36914 L 329.98828,199.2832 L 333.72656,186.36914 L 337.61719,186.36914 L 331.73438,203.63086 L 328.33594,203.63086" + id="text5691" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 386.32031,200.51367 L 390.52734,200.51367 C 391.51952,200.51367 392.24218,200.33399 392.69531,199.97461 C 393.14843,199.61524 393.37499,199.04883 393.375,198.27539 C 393.37499,197.47071 393.15233,196.89258 392.70703,196.54102 C 392.26171,196.18165 391.52733,196.00196 390.50391,196.00195 L 386.32031,196.00195 L 386.32031,200.51367 M 386.32031,193.04883 L 390.375,193.04883 C 391.24999,193.04884 391.89061,192.9004 392.29688,192.60352 C 392.70311,192.29884 392.90624,191.82228 392.90625,191.17383 C 392.90624,190.54103 392.70702,190.084 392.30859,189.80273 C 391.91796,189.51369 391.26561,189.36915 390.35156,189.36914 L 386.32031,189.36914 L 386.32031,193.04883 M 382.92188,203.63086 L 382.92188,186.36914 L 391.05469,186.36914 C 392.8203,186.36916 394.16405,186.74416 395.08594,187.49414 C 396.01561,188.23634 396.48045,189.31837 396.48047,190.74023 C 396.48045,191.61525 396.30858,192.34571 395.96484,192.93164 C 395.62108,193.51759 395.10545,193.97071 394.41797,194.29102 C 395.30858,194.6504 395.97264,195.16993 396.41016,195.84961 C 396.85545,196.52149 397.07811,197.36133 397.07813,198.36914 C 397.07811,200.04883 396.53123,201.34571 395.4375,202.25977 C 394.34374,203.17383 392.79296,203.63086 390.78516,203.63086 L 382.92188,203.63086" + id="text5695" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 442.88672,203.63086 L 442.88672,186.36914 L 446.60156,186.36914 L 453.60938,198.22852 L 453.60938,186.36914 L 457.11328,186.36914 L 457.11328,203.63086 L 453.44531,203.63086 L 446.39063,191.77148 L 446.39063,203.63086 L 442.88672,203.63086" + id="text5699" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 501.32813,203.63086 L 501.32813,186.36914 L 506.57813,186.36914 L 510.01172,199.50586 L 513.39844,186.36914 L 518.67188,186.36914 L 518.67188,203.63086 L 515.34375,203.63086 L 515.34375,189.70898 L 511.83984,203.63086 L 508.20703,203.63086 L 504.65625,189.70898 L 504.65625,203.63086 L 501.32813,203.63086" + id="text5703" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 658.22461,134.6543 L 658.22461,131.10352 L 661.77539,131.10352 L 661.77539,134.6543 L 658.22461,134.6543 M 658.22461,143.63086 L 658.22461,140.10352 L 661.77539,140.10352 L 661.77539,143.63086 L 658.22461,143.63086 M 658.24805,164.6543 L 658.24805,161.10352 L 661.77539,161.10352 L 661.77539,164.6543 L 658.24805,164.6543 M 658.24805,177.68555 L 658.24805,176.31445 C 658.90429,176.12695 659.38867,175.83789 659.70117,175.44727 C 660.01367,175.05664 660.16992,174.54883 660.16992,173.92383 L 660.16992,173.63086 L 658.22461,173.63086 L 658.22461,170.10352 L 661.77539,170.10352 L 661.77539,173.49023 C 661.77539,174.66211 661.47851,175.59961 660.88477,176.30273 C 660.29101,177.01367 659.41211,177.47461 658.24805,177.68555" + id="text5725" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 720.78516,126.7793 L 723.03516,126.7793 L 723.03516,133.33008 L 720.78516,133.33008 L 720.78516,126.7793 M 716.96484,126.7793 L 719.21484,126.7793 L 719.21484,133.33008 L 716.96484,133.33008 L 716.96484,126.7793 M 718.88672,156.7793 L 721.13672,156.7793 L 721.13672,163.33008 L 718.88672,163.33008 L 718.88672,156.7793" + id="text5731" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 772.5,140.60938 L 772.5,129.10156 L 780.85156,129.10156 L 780.85156,131.10156 L 774.83594,131.10156 L 774.83594,133.55469 L 780.33594,133.55469 L 780.33594,135.52344 L 774.83594,135.52344 L 774.83594,138.48438 L 781.13281,138.48438 L 781.13281,140.60938 L 772.5,140.60938 M 782.74219,140.60938 L 782.74219,132.11719 L 784.96875,132.11719 L 784.96875,133.125 C 785.28645,132.71355 785.66145,132.40626 786.09375,132.20313 C 786.52604,131.9948 787.00781,131.89063 787.53906,131.89063 C 788.47656,131.89063 789.17708,132.13543 789.64063,132.625 C 790.10937,133.10938 790.34374,133.84115 790.34375,134.82031 L 790.34375,140.60938 L 788.07031,140.60938 L 788.07031,135.47656 C 788.07031,134.86719 787.96614,134.4323 787.75781,134.17188 C 787.55468,133.91147 787.22135,133.78126 786.75781,133.78125 C 786.22135,133.78126 785.79687,133.94271 785.48438,134.26563 C 785.17187,134.58334 785.01562,135.01823 785.01563,135.57031 L 785.01563,140.60938 L 782.74219,140.60938 M 796.07813,140.67188 C 795.86979,140.67708 795.61979,140.6849 795.32813,140.69531 C 795.04166,140.71094 794.85937,140.71875 794.78125,140.71875 C 793.91146,140.71875 793.3151,140.55729 792.99219,140.23438 C 792.67448,139.90625 792.51562,139.26302 792.51563,138.30469 L 792.51563,133.71094 L 791.39063,133.71094 L 791.39063,132.11719 L 792.51563,132.11719 L 792.51563,129.79688 L 794.76563,129.79688 L 794.76563,132.11719 L 796.07813,132.11719 L 796.07813,133.71094 L 794.76563,133.71094 L 794.76563,138.41406 C 794.76562,138.63802 794.8151,138.78646 794.91406,138.85938 C 795.01302,138.92709 795.21614,138.96094 795.52344,138.96094 L 796.07813,138.96094 L 796.07813,140.67188 M 802.63281,138.03125 L 804.89844,138.03125 C 804.66926,138.92709 804.20572,139.63021 803.50781,140.14063 C 802.8151,140.64583 801.96874,140.89844 800.96875,140.89844 C 799.73958,140.89844 798.76562,140.48698 798.04688,139.66406 C 797.32812,138.83594 796.96875,137.71615 796.96875,136.30469 C 796.96875,134.91407 797.32292,133.81772 798.03125,133.01563 C 798.73958,132.21355 799.70833,131.81251 800.9375,131.8125 C 802.23958,131.81251 803.24478,132.20834 803.95313,133 C 804.66145,133.78647 805.01562,134.90886 805.01563,136.36719 C 805.01562,136.52865 805.01301,136.65105 805.00781,136.73438 C 805.0078,136.8125 805.0026,136.88802 804.99219,136.96094 L 799.32031,136.96094 C 799.35156,137.62761 799.51302,138.13021 799.80469,138.46875 C 800.10156,138.80729 800.52604,138.97656 801.07813,138.97656 C 801.46874,138.97656 801.78906,138.90104 802.03906,138.75 C 802.28906,138.59375 802.48697,138.35417 802.63281,138.03125 M 799.32031,135.46875 L 802.66406,135.46875 C 802.64322,134.89584 802.48958,134.46094 802.20313,134.16406 C 801.92187,133.86199 801.51562,133.71094 800.98438,133.71094 C 800.48958,133.71094 800.09895,133.86199 799.8125,134.16406 C 799.53125,134.46615 799.36718,134.90105 799.32031,135.46875 M 806.52344,140.60938 L 806.52344,132.11719 L 808.63281,132.11719 L 808.63281,133.57031 C 808.92968,132.98699 809.27604,132.5599 809.67188,132.28906 C 810.0677,132.01303 810.53906,131.87501 811.08594,131.875 C 811.17447,131.87501 811.24218,131.87761 811.28906,131.88281 C 811.34114,131.88282 811.38281,131.88543 811.41406,131.89063 L 811.42188,134.19531 L 810.66406,134.19531 C 810.04427,134.19532 809.57812,134.35678 809.26563,134.67969 C 808.95312,135.00261 808.79687,135.48178 808.79688,136.11719 L 808.79688,140.60938 L 806.52344,140.60938" + id="text5737" /> + <path + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="M 787.5,172.5 L 787.5,157.5 L 772.5,165 L 787.5,172.5 z " + id="path5745" /> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1" + d="M 810,150 L 810,165 L 780,165" + id="path5747" /> + <g + id="g3601"> + <path + id="text5753" + d="M 12.496094,197.64063 L 14.832032,197.64063 C 14.92057,198.27084 15.178382,198.73828 15.605469,199.04297 C 16.032548,199.34766 16.649735,199.5 17.457032,199.5 C 18.144525,199.5 18.662754,199.37761 19.011719,199.13281 C 19.36067,198.88802 19.535149,198.52604 19.535157,198.04688 C 19.535149,197.34896 18.532546,196.77084 16.527344,196.3125 C 16.501298,196.3073 16.47786,196.30209 16.457032,196.29688 C 16.404944,196.28646 16.324215,196.26823 16.214844,196.24219 C 15.141924,196.00782 14.3763,195.7448 13.917969,195.45313 C 13.511717,195.19271 13.201822,194.84245 12.988282,194.40234 C 12.774739,193.96225 12.667968,193.44272 12.667969,192.84375 C 12.667968,191.72397 13.048176,190.8659 13.808594,190.26953 C 14.569008,189.67319 15.667965,189.37501 17.105469,189.375 C 18.449212,189.37501 19.499993,189.69272 20.257813,190.32813 C 21.015616,190.96355 21.415355,191.85938 21.457032,193.01563 L 19.183594,193.01563 C 19.14192,192.45834 18.928379,192.03386 18.542969,191.74219 C 18.157546,191.45053 17.608067,191.3047 16.894532,191.30469 C 16.274735,191.3047 15.796871,191.42579 15.460938,191.66797 C 15.124997,191.91017 14.957028,192.25522 14.957032,192.70313 C 14.957028,193.31251 15.610674,193.76824 16.917969,194.07031 C 17.27213,194.15365 17.548172,194.21876 17.746094,194.26563 C 18.584629,194.47917 19.17968,194.64584 19.53125,194.76563 C 19.882805,194.88542 20.188794,195.01824 20.449219,195.16406 C 20.91796,195.42448 21.269522,195.76954 21.503907,196.19922 C 21.738272,196.62891 21.855459,197.14323 21.855469,197.74219 C 21.855459,198.94011 21.451814,199.86849 20.644532,200.52734 C 19.837232,201.1862 18.699212,201.51562 17.230469,201.51563 C 15.782548,201.51562 14.647133,201.17969 13.824219,200.50781 C 13.001301,199.83594 12.558593,198.88021 12.496094,197.64063 L 12.496094,197.64063 z M 23.566407,201.19531 L 23.566407,189.6875 L 25.824219,189.6875 L 25.824219,193.64063 C 26.131507,193.25522 26.497392,192.96485 26.921875,192.76953 C 27.34635,192.57423 27.82161,192.47657 28.347657,192.47656 C 28.84765,192.47657 29.299473,192.56251 29.703125,192.73438 C 30.106764,192.90626 30.433586,193.15105 30.683594,193.46875 C 30.855461,193.6823 30.976554,193.92709 31.046875,194.20313 C 31.117179,194.47917 31.152335,194.92188 31.152344,195.53125 L 31.152344,195.6875 L 31.152344,201.19531 L 28.894532,201.19531 L 28.894532,196.75 C 28.894525,195.69792 28.798171,195.03777 28.605469,194.76953 C 28.412755,194.50131 28.066401,194.36719 27.566407,194.36719 C 27.029944,194.36719 26.605465,194.52735 26.292969,194.84766 C 25.980466,195.16797 25.824216,195.60417 25.824219,196.15625 L 25.824219,201.19531 L 23.566407,201.19531 z M 33.191407,191.75781 L 33.191407,189.6875 L 35.464844,189.6875 L 35.464844,191.75781 L 33.191407,191.75781 z M 33.191407,201.19531 L 33.191407,192.70313 L 35.464844,192.70313 L 35.464844,201.19531 L 33.191407,201.19531 z M 37.886719,201.19531 L 37.886719,194.29688 L 36.675782,194.29688 L 36.675782,192.70313 L 37.886719,192.70313 L 37.886719,191.91406 C 37.886718,191.12241 38.091144,190.54038 38.5,190.16797 C 38.908852,189.79558 39.553383,189.60939 40.433594,189.60938 C 40.595048,189.60939 40.765621,189.61329 40.945313,189.62109 C 41.124996,189.62892 41.316402,189.64324 41.519532,189.66406 L 41.519532,191.46875 L 40.925782,191.46875 C 40.587236,191.46876 40.36458,191.51303 40.257813,191.60156 C 40.151038,191.69011 40.097653,191.85938 40.097657,192.10938 L 40.097657,192.70313 L 41.519532,192.70313 L 41.519532,194.29688 L 40.113282,194.29688 L 40.113282,201.19531 L 37.886719,201.19531 z M 46.449219,201.25781 C 46.240881,201.26302 45.992183,201.27214 45.703125,201.28516 C 45.414059,201.29818 45.230465,201.30469 45.152344,201.30469 C 44.28255,201.30469 43.687498,201.14193 43.367188,200.81641 C 43.046874,200.49089 42.886718,199.84896 42.886719,198.89063 L 42.886719,194.29688 L 41.761719,194.29688 L 41.761719,192.70313 L 42.886719,192.70313 L 42.886719,190.38281 L 45.136719,190.38281 L 45.136719,192.70313 L 46.449219,192.70313 L 46.449219,194.29688 L 45.136719,194.29688 L 45.136719,199 C 45.136716,199.22396 45.186195,199.3711 45.285157,199.44141 C 45.384111,199.51172 45.587236,199.54688 45.894532,199.54688 L 46.449219,199.54688 L 46.449219,201.25781 z " + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" /> + <path + style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" + d="M 24.746094,207.125 L 13.496094,222.125 L 20.996094,222.125 L 20.996094,229.625 L 28.496094,229.625 L 28.496094,222.125 L 35.996094,222.125 L 24.746094,207.125 z " + id="path5757" /> + </g> + <g + id="g5795" + transform="translate(727.5,0)"> + <text + sodipodi:linespacing="125%" + id="text5797" + y="201.19531" + x="31.8125" + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + xml:space="preserve"><tspan + y="201.19531" + x="31.8125" + id="tspan5799" + sodipodi:role="line">Shift</tspan></text> + <path + id="path5801" + d="M 27.25,207.125 L 16,222.125 L 23.5,222.125 L 23.5,229.625 L 31,229.625 L 31,222.125 L 38.5,222.125 L 27.25,207.125 z " + style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> + </g> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 576.90234,189.63867 L 576.90234,192.20508 L 566.4375,196.48242 L 576.90234,200.74805 L 576.90234,203.31445 L 563.09766,197.63086 L 563.09766,195.29883 L 576.90234,189.63867 M 568.21875,237.68555 L 568.21875,236.31445 C 568.875,236.12695 569.35937,235.83789 569.67188,235.44727 C 569.98437,235.05664 570.14062,234.54883 570.14063,233.92383 L 570.14063,233.63086 L 568.21875,233.63086 L 568.21875,230.10352 L 571.76953,230.10352 L 571.76953,233.49023 C 571.76953,234.6543 571.46875,235.59179 570.86719,236.30273 C 570.27343,237.01367 569.39062,237.47461 568.21875,237.68555" + id="text5803" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 623.09766,189.63867 L 636.90234,195.29883 L 636.90234,197.63086 L 623.09766,203.31445 L 623.09766,200.74805 L 633.58594,196.48242 L 623.09766,192.20508 L 623.09766,189.63867 M 628.21875,233.63086 L 628.21875,230.10352 L 631.74609,230.10352 L 631.74609,233.63086 L 628.21875,233.63086" + id="text5813" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 688.44727,198.61523 C 688.44726,198.5293 688.44335,198.41602 688.43555,198.27539 C 688.42773,198.12696 688.42382,198.01758 688.42383,197.94727 C 688.42382,197.25977 688.49804,196.68946 688.64648,196.23633 C 688.79492,195.7754 689.0332,195.34571 689.36133,194.94727 C 689.61132,194.6504 689.98242,194.31056 690.47461,193.92773 C 690.9746,193.54493 691.29882,193.26759 691.44727,193.0957 C 691.75976,192.74415 691.9746,192.42775 692.0918,192.14648 C 692.20898,191.86525 692.26757,191.55665 692.26758,191.2207 C 692.26757,190.47853 692.06054,189.9004 691.64648,189.48633 C 691.23241,189.07228 690.65429,188.86525 689.91211,188.86523 C 689.16992,188.86525 688.58398,189.11525 688.1543,189.61523 C 687.73242,190.10744 687.50195,190.80275 687.46289,191.70117 L 684.1582,191.70117 L 684.1582,191.33789 C 684.1582,189.68947 684.67773,188.37697 685.7168,187.40039 C 686.76367,186.41603 688.16992,185.92385 689.93555,185.92383 C 691.74023,185.92385 693.17382,186.38869 694.23633,187.31836 C 695.30663,188.24025 695.84178,189.47853 695.8418,191.0332 C 695.84178,191.58009 695.77928,192.07228 695.6543,192.50977 C 695.5371,192.93946 695.3535,193.33399 695.10352,193.69336 C 694.78319,194.14649 694.2871,194.63868 693.61523,195.16992 C 692.95116,195.69337 692.54882,196.01759 692.4082,196.14258 C 692.11132,196.43165 691.89648,196.73634 691.76367,197.05664 C 691.63866,197.37696 691.57616,197.75977 691.57617,198.20508 C 691.57616,198.24415 691.58007,198.31055 691.58789,198.4043 C 691.59569,198.49805 691.5996,198.56836 691.59961,198.61523 L 688.44727,198.61523 M 688.2832,203.63086 L 688.2832,200.19727 L 691.74023,200.19727 L 691.74023,203.63086 L 688.2832,203.63086 M 686.31445,235.85742 L 692.12695,215.92383 L 693.73242,215.92383 L 687.89648,235.85742 L 686.31445,235.85742" + id="text5819" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 18,271.78906 C 17.911447,273.09636 17.406239,274.13542 16.484375,274.90625 C 15.5677,275.67708 14.369784,276.0625 12.890625,276.0625 C 11.187496,276.0625 9.8619761,275.53125 8.9140625,274.46875 C 7.971353,273.40625 7.4999993,271.91667 7.5,270 C 7.4999993,268.04167 7.9817696,266.54168 8.9453125,265.5 C 9.9088511,264.45834 11.294266,263.93751 13.101563,263.9375 C 14.570305,263.93751 15.729158,264.29689 16.578125,265.01563 C 17.432281,265.72918 17.901031,266.73959 17.984375,268.04688 L 15.648438,268.04688 C 15.54947,267.39584 15.283846,266.90105 14.851563,266.5625 C 14.419263,266.21876 13.83593,266.04688 13.101563,266.04688 C 12.059891,266.04688 11.268225,266.38282 10.726563,267.05469 C 10.184892,267.72657 9.9140594,268.70834 9.9140625,270 C 9.9140594,271.25 10.182288,272.21615 10.71875,272.89844 C 11.260412,273.58073 12.028641,273.92188 13.023438,273.92188 C 13.742181,273.92188 14.330722,273.73959 14.789063,273.375 C 15.247387,273.00521 15.544262,272.47657 15.679688,271.78906 L 18,271.78906 M 23.46875,275.80469 C 23.260412,275.8099 23.010412,275.81771 22.71875,275.82813 C 22.432288,275.84375 22.249996,275.85156 22.171875,275.85156 C 21.302081,275.85156 20.705727,275.6901 20.382813,275.36719 C 20.065103,275.03906 19.906249,274.39583 19.90625,273.4375 L 19.90625,268.84375 L 18.78125,268.84375 L 18.78125,267.25 L 19.90625,267.25 L 19.90625,264.92969 L 22.15625,264.92969 L 22.15625,267.25 L 23.46875,267.25 L 23.46875,268.84375 L 22.15625,268.84375 L 22.15625,273.54688 C 22.156247,273.77084 22.205726,273.91927 22.304688,273.99219 C 22.403642,274.0599 22.606767,274.09375 22.914063,274.09375 L 23.46875,274.09375 L 23.46875,275.80469 M 24.789063,275.74219 L 24.789063,267.25 L 26.898438,267.25 L 26.898438,268.70313 C 27.195309,268.1198 27.541663,267.69272 27.9375,267.42188 C 28.333329,267.14584 28.804682,267.00782 29.351563,267.00781 C 29.440099,267.00782 29.507807,267.01043 29.554688,267.01563 C 29.606765,267.01563 29.648432,267.01824 29.679688,267.02344 L 29.6875,269.32813 L 28.929688,269.32813 C 28.309891,269.32813 27.843746,269.48959 27.53125,269.8125 C 27.218747,270.13542 27.062497,270.61459 27.0625,271.25 L 27.0625,275.74219 L 24.789063,275.74219 M 31.023438,275.74219 L 31.023438,264.23438 L 33.296875,264.23438 L 33.296875,275.74219 L 31.023438,275.74219" + id="text5827" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 162.96875,266.49609 L 161.375,271.39453 L 164.57031,271.39453 L 162.96875,266.49609 M 161.59375,264.19141 L 164.32813,264.19141 L 168.47656,275.69922 L 165.99219,275.69922 L 165.21094,273.33203 L 160.75,273.33203 L 159.99219,275.69922 L 157.5,275.69922 L 161.59375,264.19141 M 169.53906,275.69922 L 169.53906,264.19141 L 171.8125,264.19141 L 171.8125,275.69922 L 169.53906,275.69922 M 177.64063,275.76172 C 177.43229,275.76693 177.18229,275.77474 176.89063,275.78516 C 176.60416,275.80078 176.42187,275.80859 176.34375,275.80859 C 175.47396,275.80859 174.8776,275.64714 174.55469,275.32422 C 174.23698,274.99609 174.07812,274.35287 174.07813,273.39453 L 174.07813,268.80078 L 172.95313,268.80078 L 172.95313,267.20703 L 174.07813,267.20703 L 174.07813,264.88672 L 176.32813,264.88672 L 176.32813,267.20703 L 177.64063,267.20703 L 177.64063,268.80078 L 176.32813,268.80078 L 176.32813,273.50391 C 176.32812,273.72787 176.3776,273.8763 176.47656,273.94922 C 176.57552,274.01693 176.77864,274.05078 177.08594,274.05078 L 177.64063,274.05078 L 177.64063,275.76172" + id="text5831" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 612.96875,266.53906 L 611.375,271.4375 L 614.57031,271.4375 L 612.96875,266.53906 M 611.59375,264.23438 L 614.32813,264.23438 L 618.47656,275.74219 L 615.99219,275.74219 L 615.21094,273.375 L 610.75,273.375 L 609.99219,275.74219 L 607.5,275.74219 L 611.59375,264.23438 M 619.53906,275.74219 L 619.53906,264.23438 L 621.8125,264.23438 L 621.8125,275.74219 L 619.53906,275.74219 M 627.64063,275.80469 C 627.43229,275.8099 627.18229,275.81771 626.89063,275.82813 C 626.60416,275.84375 626.42187,275.85156 626.34375,275.85156 C 625.47396,275.85156 624.8776,275.6901 624.55469,275.36719 C 624.23698,275.03906 624.07812,274.39583 624.07813,273.4375 L 624.07813,268.84375 L 622.95313,268.84375 L 622.95313,267.25 L 624.07813,267.25 L 624.07813,264.92969 L 626.32813,264.92969 L 626.32813,267.25 L 627.64063,267.25 L 627.64063,268.84375 L 626.32813,268.84375 L 626.32813,273.54688 C 626.32812,273.77084 626.3776,273.91927 626.47656,273.99219 C 626.57552,274.0599 626.77864,274.09375 627.08594,274.09375 L 627.64063,274.09375 L 627.64063,275.80469 M 642,274.38281 C 641.57291,274.96094 641.08593,275.38542 640.53906,275.65625 C 639.99739,275.92708 639.35937,276.0625 638.625,276.0625 C 637.01562,276.0625 635.71093,275.50521 634.71094,274.39063 C 633.71614,273.27084 633.21875,271.80209 633.21875,269.98438 C 633.21875,268.15105 633.71614,266.6849 634.71094,265.58594 C 635.70573,264.48699 637.03125,263.93751 638.6875,263.9375 C 640.1302,263.93751 641.30728,264.28387 642.21875,264.97656 C 643.1302,265.66407 643.67186,266.61199 643.84375,267.82031 L 641.42969,267.82031 C 641.28385,267.22136 640.98437,266.76563 640.53125,266.45313 C 640.08333,266.14063 639.49739,265.98438 638.77344,265.98438 C 637.80989,265.98438 637.05208,266.33855 636.5,267.04688 C 635.95312,267.75001 635.67968,268.72397 635.67969,269.96875 C 635.67968,271.21875 635.96614,272.19792 636.53906,272.90625 C 637.11197,273.61459 637.89843,273.96875 638.89844,273.96875 C 639.64843,273.96875 640.27603,273.7474 640.78125,273.30469 C 641.28645,272.86198 641.59895,272.25521 641.71875,271.48438 L 639.10938,271.48438 L 639.10938,269.51563 L 643.875,269.51563 L 643.875,275.74219 L 642.28906,275.74219 L 642,274.38281 M 645.96094,275.74219 L 645.96094,267.25 L 648.07031,267.25 L 648.07031,268.70313 C 648.36718,268.1198 648.71354,267.69272 649.10938,267.42188 C 649.5052,267.14584 649.97656,267.00782 650.52344,267.00781 C 650.61197,267.00782 650.67968,267.01043 650.72656,267.01563 C 650.77864,267.01563 650.82031,267.01824 650.85156,267.02344 L 650.85938,269.32813 L 650.10156,269.32813 C 649.48177,269.32813 649.01562,269.48959 648.70313,269.8125 C 648.39062,270.13542 648.23437,270.61459 648.23438,271.25 L 648.23438,275.74219 L 645.96094,275.74219" + id="text5835" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 828,271.78906 C 827.91145,273.09636 827.40624,274.13542 826.48438,274.90625 C 825.5677,275.67708 824.36978,276.0625 822.89063,276.0625 C 821.1875,276.0625 819.86198,275.53125 818.91406,274.46875 C 817.97135,273.40625 817.5,271.91667 817.5,270 C 817.5,268.04167 817.98177,266.54168 818.94531,265.5 C 819.90885,264.45834 821.29427,263.93751 823.10156,263.9375 C 824.5703,263.93751 825.72916,264.29689 826.57813,265.01563 C 827.43228,265.72918 827.90103,266.73959 827.98438,268.04688 L 825.64844,268.04688 C 825.54947,267.39584 825.28385,266.90105 824.85156,266.5625 C 824.41926,266.21876 823.83593,266.04688 823.10156,266.04688 C 822.05989,266.04688 821.26822,266.38282 820.72656,267.05469 C 820.18489,267.72657 819.91406,268.70834 819.91406,270 C 819.91406,271.25 820.18229,272.21615 820.71875,272.89844 C 821.26041,273.58073 822.02864,273.92188 823.02344,273.92188 C 823.74218,273.92188 824.33072,273.73959 824.78906,273.375 C 825.24739,273.00521 825.54426,272.47657 825.67969,271.78906 L 828,271.78906 M 833.46875,275.80469 C 833.26041,275.8099 833.01041,275.81771 832.71875,275.82813 C 832.43229,275.84375 832.25,275.85156 832.17188,275.85156 C 831.30208,275.85156 830.70573,275.6901 830.38281,275.36719 C 830.0651,275.03906 829.90625,274.39583 829.90625,273.4375 L 829.90625,268.84375 L 828.78125,268.84375 L 828.78125,267.25 L 829.90625,267.25 L 829.90625,264.92969 L 832.15625,264.92969 L 832.15625,267.25 L 833.46875,267.25 L 833.46875,268.84375 L 832.15625,268.84375 L 832.15625,273.54688 C 832.15625,273.77084 832.20573,273.91927 832.30469,273.99219 C 832.40364,274.0599 832.60677,274.09375 832.91406,274.09375 L 833.46875,274.09375 L 833.46875,275.80469 M 834.78906,275.74219 L 834.78906,267.25 L 836.89844,267.25 L 836.89844,268.70313 C 837.19531,268.1198 837.54166,267.69272 837.9375,267.42188 C 838.33333,267.14584 838.80468,267.00782 839.35156,267.00781 C 839.4401,267.00782 839.50781,267.01043 839.55469,267.01563 C 839.60677,267.01563 839.64843,267.01824 839.67969,267.02344 L 839.6875,269.32813 L 838.92969,269.32813 C 838.30989,269.32813 837.84375,269.48959 837.53125,269.8125 C 837.21875,270.13542 837.0625,270.61459 837.0625,271.25 L 837.0625,275.74219 L 834.78906,275.74219 M 841.02344,275.74219 L 841.02344,264.23438 L 843.29688,264.23438 L 843.29688,275.74219 L 841.02344,275.74219" + id="text5839" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 108.94531,264.01953 L 105.64844,252.51172 L 108.10156,252.51172 L 110.07031,260.62891 L 111.73438,252.51172 L 114.25781,252.51172 L 115.92188,260.62891 L 117.89063,252.51172 L 120.32031,252.51172 L 117.03125,264.01953 L 114.77344,264.01953 L 112.99219,255.20703 L 111.20313,264.01953 L 108.94531,264.01953 M 121.5,254.58203 L 121.5,252.51172 L 123.77344,252.51172 L 123.77344,254.58203 L 121.5,254.58203 M 121.5,264.01953 L 121.5,255.52734 L 123.77344,255.52734 L 123.77344,264.01953 L 121.5,264.01953 M 125.79688,264.01953 L 125.79688,255.52734 L 128.02344,255.52734 L 128.02344,256.53516 C 128.34114,256.12371 128.71614,255.81641 129.14844,255.61328 C 129.58072,255.40496 130.06249,255.30079 130.59375,255.30078 C 131.53124,255.30079 132.23176,255.54558 132.69531,256.03516 C 133.16405,256.51954 133.39843,257.25131 133.39844,258.23047 L 133.39844,264.01953 L 131.125,264.01953 L 131.125,258.88672 C 131.12499,258.27735 131.02083,257.84245 130.8125,257.58203 C 130.60937,257.32162 130.27604,257.19141 129.8125,257.19141 C 129.27604,257.19141 128.85156,257.35287 128.53906,257.67578 C 128.22656,257.9935 128.07031,258.42839 128.07031,258.98047 L 128.07031,264.01953 L 125.79688,264.01953 M 106.64844,284.01953 L 106.64844,272.51172 L 109.01563,272.51172 L 109.01563,277.23828 L 113.50781,272.51172 L 116.46875,272.51172 L 111.875,277.16797 L 116.88281,284.01953 L 113.99219,284.01953 L 110.24219,278.75391 L 109.01563,279.97266 L 109.01563,284.01953 L 106.64844,284.01953 M 122.9375,281.44141 L 125.20313,281.44141 C 124.97395,282.33724 124.51041,283.04037 123.8125,283.55078 C 123.11979,284.05599 122.27343,284.30859 121.27344,284.30859 C 120.04427,284.30859 119.07031,283.89714 118.35156,283.07422 C 117.63281,282.2461 117.27344,281.1263 117.27344,279.71484 C 117.27344,278.32422 117.6276,277.22787 118.33594,276.42578 C 119.04427,275.62371 120.01302,275.22267 121.24219,275.22266 C 122.54427,275.22267 123.54947,275.6185 124.25781,276.41016 C 124.96614,277.19662 125.3203,278.31902 125.32031,279.77734 C 125.3203,279.93881 125.3177,280.0612 125.3125,280.14453 C 125.31249,280.22266 125.30728,280.29818 125.29688,280.37109 L 119.625,280.37109 C 119.65625,281.03776 119.81771,281.54037 120.10938,281.87891 C 120.40625,282.21745 120.83073,282.38672 121.38281,282.38672 C 121.77343,282.38672 122.09374,282.3112 122.34375,282.16016 C 122.59374,282.00391 122.79166,281.76433 122.9375,281.44141 M 119.625,278.87891 L 122.96875,278.87891 C 122.94791,278.306 122.79426,277.8711 122.50781,277.57422 C 122.22656,277.27214 121.82031,277.1211 121.28906,277.12109 C 120.79427,277.1211 120.40364,277.27214 120.11719,277.57422 C 119.83593,277.87631 119.67187,278.3112 119.625,278.87891 M 127.16406,287.42578 L 127.16406,285.58984 C 127.23698,285.60026 127.3125,285.60807 127.39063,285.61328 C 127.46875,285.61849 127.57031,285.62109 127.69531,285.62109 C 128.14323,285.62109 128.47916,285.51432 128.70313,285.30078 C 128.92708,285.09245 129.03906,284.77734 129.03906,284.35547 C 129.03906,284.32422 129.03385,284.28516 129.02344,284.23828 C 129.01302,284.19141 129.0026,284.15234 128.99219,284.12109 L 125.92969,275.52734 L 128.42969,275.52734 L 130.21875,281.65234 L 131.96094,275.52734 L 134.35156,275.52734 L 130.85938,285.54297 C 130.59895,286.29297 130.27343,286.80338 129.88281,287.07422 C 129.49218,287.35026 128.90625,287.48828 128.125,287.48828 C 127.98437,287.48828 127.83333,287.48307 127.67188,287.47266 C 127.51041,287.46224 127.34114,287.44661 127.16406,287.42578" + id="text5872" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 708.94531,264.01953 L 705.64844,252.51172 L 708.10156,252.51172 L 710.07031,260.62891 L 711.73438,252.51172 L 714.25781,252.51172 L 715.92188,260.62891 L 717.89063,252.51172 L 720.32031,252.51172 L 717.03125,264.01953 L 714.77344,264.01953 L 712.99219,255.20703 L 711.20313,264.01953 L 708.94531,264.01953 M 721.5,254.58203 L 721.5,252.51172 L 723.77344,252.51172 L 723.77344,254.58203 L 721.5,254.58203 M 721.5,264.01953 L 721.5,255.52734 L 723.77344,255.52734 L 723.77344,264.01953 L 721.5,264.01953 M 725.79688,264.01953 L 725.79688,255.52734 L 728.02344,255.52734 L 728.02344,256.53516 C 728.34114,256.12371 728.71614,255.81641 729.14844,255.61328 C 729.58072,255.40496 730.06249,255.30079 730.59375,255.30078 C 731.53124,255.30079 732.23176,255.54558 732.69531,256.03516 C 733.16405,256.51954 733.39843,257.25131 733.39844,258.23047 L 733.39844,264.01953 L 731.125,264.01953 L 731.125,258.88672 C 731.12499,258.27735 731.02083,257.84245 730.8125,257.58203 C 730.60937,257.32162 730.27604,257.19141 729.8125,257.19141 C 729.27604,257.19141 728.85156,257.35287 728.53906,257.67578 C 728.22656,257.9935 728.07031,258.42839 728.07031,258.98047 L 728.07031,264.01953 L 725.79688,264.01953 M 706.64844,284.01953 L 706.64844,272.51172 L 709.01563,272.51172 L 709.01563,277.23828 L 713.50781,272.51172 L 716.46875,272.51172 L 711.875,277.16797 L 716.88281,284.01953 L 713.99219,284.01953 L 710.24219,278.75391 L 709.01563,279.97266 L 709.01563,284.01953 L 706.64844,284.01953 M 722.9375,281.44141 L 725.20313,281.44141 C 724.97395,282.33724 724.51041,283.04037 723.8125,283.55078 C 723.11979,284.05599 722.27343,284.30859 721.27344,284.30859 C 720.04427,284.30859 719.07031,283.89714 718.35156,283.07422 C 717.63281,282.2461 717.27344,281.1263 717.27344,279.71484 C 717.27344,278.32422 717.6276,277.22787 718.33594,276.42578 C 719.04427,275.62371 720.01302,275.22267 721.24219,275.22266 C 722.54427,275.22267 723.54947,275.6185 724.25781,276.41016 C 724.96614,277.19662 725.3203,278.31902 725.32031,279.77734 C 725.3203,279.93881 725.3177,280.0612 725.3125,280.14453 C 725.31249,280.22266 725.30728,280.29818 725.29688,280.37109 L 719.625,280.37109 C 719.65625,281.03776 719.81771,281.54037 720.10938,281.87891 C 720.40625,282.21745 720.83073,282.38672 721.38281,282.38672 C 721.77343,282.38672 722.09374,282.3112 722.34375,282.16016 C 722.59374,282.00391 722.79166,281.76433 722.9375,281.44141 M 719.625,278.87891 L 722.96875,278.87891 C 722.94791,278.306 722.79426,277.8711 722.50781,277.57422 C 722.22656,277.27214 721.82031,277.1211 721.28906,277.12109 C 720.79427,277.1211 720.40364,277.27214 720.11719,277.57422 C 719.83593,277.87631 719.67187,278.3112 719.625,278.87891 M 727.16406,287.42578 L 727.16406,285.58984 C 727.23698,285.60026 727.3125,285.60807 727.39063,285.61328 C 727.46875,285.61849 727.57031,285.62109 727.69531,285.62109 C 728.14323,285.62109 728.47916,285.51432 728.70313,285.30078 C 728.92708,285.09245 729.03906,284.77734 729.03906,284.35547 C 729.03906,284.32422 729.03385,284.28516 729.02344,284.23828 C 729.01302,284.19141 729.0026,284.15234 728.99219,284.12109 L 725.92969,275.52734 L 728.42969,275.52734 L 730.21875,281.65234 L 731.96094,275.52734 L 734.35156,275.52734 L 730.85938,285.54297 C 730.59895,286.29297 730.27343,286.80338 729.88281,287.07422 C 729.49218,287.35026 728.90625,287.48828 728.125,287.48828 C 727.98437,287.48828 727.83333,287.48307 727.67188,287.47266 C 727.51041,287.46224 727.34114,287.44661 727.16406,287.42578" + id="text5878" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 759.98438,275.60938 L 759.98438,264.10156 L 763.48438,264.10156 L 765.77344,272.85938 L 768.03125,264.10156 L 771.54688,264.10156 L 771.54688,275.60938 L 769.32813,275.60938 L 769.32813,266.32813 L 766.99219,275.60938 L 764.57031,275.60938 L 762.20313,266.32813 L 762.20313,275.60938 L 759.98438,275.60938 M 778.99219,273.03125 L 781.25781,273.03125 C 781.02864,273.92709 780.5651,274.63021 779.86719,275.14063 C 779.17447,275.64583 778.32812,275.89844 777.32813,275.89844 C 776.09896,275.89844 775.125,275.48698 774.40625,274.66406 C 773.6875,273.83594 773.32812,272.71615 773.32813,271.30469 C 773.32812,269.91407 773.68229,268.81772 774.39063,268.01563 C 775.09896,267.21355 776.06771,266.81251 777.29688,266.8125 C 778.59895,266.81251 779.60416,267.20834 780.3125,268 C 781.02083,268.78647 781.37499,269.90886 781.375,271.36719 C 781.37499,271.52865 781.37239,271.65105 781.36719,271.73438 C 781.36718,271.8125 781.36197,271.88802 781.35156,271.96094 L 775.67969,271.96094 C 775.71093,272.62761 775.87239,273.13021 776.16406,273.46875 C 776.46093,273.80729 776.88541,273.97656 777.4375,273.97656 C 777.82812,273.97656 778.14843,273.90104 778.39844,273.75 C 778.64843,273.59375 778.84635,273.35417 778.99219,273.03125 M 775.67969,270.46875 L 779.02344,270.46875 C 779.0026,269.89584 778.84895,269.46094 778.5625,269.16406 C 778.28124,268.86199 777.87499,268.71094 777.34375,268.71094 C 776.84895,268.71094 776.45833,268.86199 776.17188,269.16406 C 775.89062,269.46615 775.72656,269.90105 775.67969,270.46875 M 782.88281,275.60938 L 782.88281,267.11719 L 785.10938,267.11719 L 785.10938,268.125 C 785.42708,267.71355 785.80208,267.40626 786.23438,267.20313 C 786.66666,266.9948 787.14843,266.89063 787.67969,266.89063 C 788.61718,266.89063 789.3177,267.13543 789.78125,267.625 C 790.24999,268.10938 790.48437,268.84115 790.48438,269.82031 L 790.48438,275.60938 L 788.21094,275.60938 L 788.21094,270.47656 C 788.21093,269.86719 788.10676,269.4323 787.89844,269.17188 C 787.69531,268.91147 787.36197,268.78126 786.89844,268.78125 C 786.36197,268.78126 785.9375,268.94272 785.625,269.26563 C 785.3125,269.58334 785.15625,270.01823 785.15625,270.57031 L 785.15625,275.60938 L 782.88281,275.60938 M 800.01563,267.11719 L 800.01563,275.60938 L 797.78906,275.60938 L 797.78906,274.60156 C 797.46614,275.01302 797.08854,275.32292 796.65625,275.53125 C 796.22916,275.73437 795.74739,275.83594 795.21094,275.83594 C 794.27864,275.83594 793.57812,275.59115 793.10938,275.10156 C 792.64583,274.61198 792.41406,273.88021 792.41406,272.90625 L 792.41406,267.11719 L 794.6875,267.11719 L 794.6875,272.25 C 794.6875,272.85417 794.78906,273.28646 794.99219,273.54688 C 795.19531,273.80209 795.53125,273.92969 796,273.92969 C 796.53124,273.92969 796.95312,273.77084 797.26563,273.45313 C 797.58333,273.13021 797.74218,272.69271 797.74219,272.14063 L 797.74219,267.11719 L 800.01563,267.11719" + id="text5884" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 104.41406,17.103516 L 104.41406,10.212891 L 101.74219,10.212891 L 101.74219,8.7949219 L 101.94141,8.7949219 C 102.89453,8.7949367 103.58984,8.6621243 104.02734,8.3964844 C 104.47265,8.1308749 104.73828,7.6894691 104.82422,7.0722656 L 106.59375,7.0722656 L 106.59375,17.103516 L 104.41406,17.103516 M 106.72266,36.369141 L 106.72266,39.826172 L 103.24219,39.826172 L 103.24219,36.369141 L 106.72266,36.369141 M 105.89063,41.173828 L 106.80469,48.978516 L 106.80469,53.630859 L 103.19531,53.630859 L 103.19531,48.978516 L 104.10938,41.173828 L 105.89063,41.173828" + id="text5890" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 160.85156,47.103516 C 160.875,46.197273 161.08984,45.431649 161.49609,44.806641 C 161.91015,44.18165 162.63672,43.548838 163.67578,42.908203 C 163.82422,42.822276 164.03125,42.701183 164.29688,42.544922 C 165.74218,41.724621 166.46484,40.931653 166.46484,40.166016 C 166.46484,39.720717 166.32031,39.369155 166.03125,39.111328 C 165.74218,38.85353 165.34375,38.724624 164.83594,38.724609 C 164.27343,38.724624 163.83984,38.88478 163.53516,39.205078 C 163.23047,39.517592 163.07812,39.966811 163.07813,40.552734 L 163.07813,40.646484 L 161.03906,40.646484 C 161.03906,39.498061 161.37891,38.615249 162.05859,37.998047 C 162.73828,37.380876 163.71093,37.072282 164.97656,37.072266 C 166.11718,37.072282 167.02343,37.353532 167.69531,37.916016 C 168.37499,38.470718 168.71484,39.212905 168.71484,40.142578 C 168.71484,40.814466 168.53905,41.39259 168.1875,41.876953 C 167.83593,42.361339 167.14843,42.919933 166.125,43.552734 C 165.89843,43.701182 165.57812,43.896494 165.16406,44.138672 C 164.22656,44.685556 163.69922,45.115243 163.58203,45.427734 L 168.62109,45.427734 L 168.62109,47.103516 L 160.85156,47.103516" + id="text5910" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 220.92188,44.033203 L 223.05469,44.033203 C 223.07031,44.603525 223.22265,45.029305 223.51172,45.310547 C 223.80078,45.591805 224.23437,45.73243 224.8125,45.732422 C 225.36718,45.73243 225.79687,45.599617 226.10156,45.333984 C 226.40624,45.068368 226.55859,44.689462 226.55859,44.197266 C 226.55859,43.697276 226.38281,43.322276 226.03125,43.072266 C 225.67968,42.814464 225.15234,42.685558 224.44922,42.685547 L 224.10938,42.685547 L 224.10938,41.291016 L 224.35547,41.291016 C 225.0039,41.291028 225.48046,41.181653 225.78516,40.962891 C 226.09765,40.736341 226.2539,40.392591 226.25391,39.931641 C 226.2539,39.54103 226.12109,39.232436 225.85547,39.005859 C 225.58984,38.771499 225.23437,38.654312 224.78906,38.654297 C 224.29687,38.654312 223.91797,38.787124 223.65234,39.052734 C 223.38672,39.310561 223.2539,39.681655 223.25391,40.166016 L 223.25391,40.236328 L 221.16797,40.236328 C 221.19141,39.212905 221.51953,38.431656 222.15234,37.892578 C 222.79297,37.345719 223.70312,37.072282 224.88281,37.072266 C 225.99218,37.072282 226.86718,37.314469 227.50781,37.798828 C 228.15624,38.283218 228.48046,38.943374 228.48047,39.779297 C 228.48046,40.21681 228.36718,40.603529 228.14063,40.939453 C 227.92187,41.26759 227.59374,41.537121 227.15625,41.748047 C 227.72656,41.974621 228.15624,42.291027 228.44531,42.697266 C 228.74218,43.095714 228.89062,43.564463 228.89063,44.103516 C 228.89062,45.119149 228.52343,45.923836 227.78906,46.517578 C 227.06249,47.103522 226.07031,47.396491 224.8125,47.396484 C 223.57031,47.396491 222.60937,47.107428 221.92969,46.529297 C 221.25781,45.95118 220.92187,45.134774 220.92188,44.080078 L 220.92188,44.033203" + id="text5922" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 278.92969,21.685547 C 279.86719,21.037112 280.53125,20.439456 280.92188,19.892578 C 281.32031,19.345707 281.51953,18.75977 281.51953,18.134766 C 281.51953,17.837896 281.47265,17.525397 281.37891,17.197266 C 281.28515,16.861335 281.14843,16.509773 280.96875,16.142578 L 278.90625,16.142578 L 278.90625,14.841797 L 280.17188,14.841797 C 279.82812,14.162119 279.57812,13.556651 279.42188,13.025391 C 279.26562,12.494152 279.1875,11.998059 279.1875,11.537109 C 279.1875,10.146498 279.69531,9.021499 280.71094,8.1621094 C 281.73437,7.3027507 283.08203,6.8730636 284.75391,6.8730469 C 286.5664,6.8730636 287.98827,7.3379069 289.01953,8.2675781 C 290.05077,9.1972801 290.61327,10.517591 290.70703,12.228516 L 287.47266,12.228516 C 287.41015,11.345715 287.15624,10.669935 286.71094,10.201172 C 286.26562,9.7324358 285.65624,9.498061 284.88281,9.4980469 C 284.14843,9.498061 283.58203,9.6894671 283.18359,10.072266 C 282.79296,10.455091 282.59765,11.005872 282.59766,11.724609 C 282.59765,12.138683 282.84375,12.888683 283.33594,13.974609 C 283.50781,14.349619 283.63671,14.638681 283.72266,14.841797 L 287.0625,14.841797 L 287.0625,16.142578 L 284.20313,16.142578 C 284.27343,16.43946 284.32421,16.712898 284.35547,16.962891 C 284.38671,17.212897 284.40234,17.443366 284.40234,17.654297 C 284.40234,18.216802 284.22656,18.779302 283.875,19.341797 C 283.53124,19.896488 282.94531,20.548831 282.11719,21.298828 C 282.625,21.064456 283.08203,20.892581 283.48828,20.783203 C 283.90234,20.666019 284.27734,20.607425 284.61328,20.607422 C 285.01952,20.607425 285.57421,20.701175 286.27734,20.888672 C 286.98046,21.068362 287.48046,21.158206 287.77734,21.158203 C 288.16796,21.158206 288.55077,21.095706 288.92578,20.970703 C 289.30858,20.845706 289.68749,20.6543 290.0625,20.396484 L 291.09375,22.939453 C 290.4453,23.322266 289.82421,23.611328 289.23047,23.806641 C 288.63671,24.009765 288.08202,24.111328 287.56641,24.111328 C 286.97265,24.111328 286.16796,23.955078 285.15234,23.642578 C 284.14453,23.330078 283.41406,23.173829 282.96094,23.173828 C 282.48437,23.173829 282.01953,23.251954 281.56641,23.408203 C 281.12109,23.564453 280.6875,23.798828 280.26563,24.111328 L 278.92969,21.685547 M 284.94141,40.025391 C 284.05859,40.025404 283.29687,40.345716 282.65625,40.986328 C 282.01562,41.626965 281.69531,42.384777 281.69531,43.259766 C 281.69531,44.1504 282.01171,44.912118 282.64453,45.544922 C 283.27734,46.169929 284.04296,46.482429 284.94141,46.482422 C 285.82421,46.482429 286.58202,46.169929 287.21484,45.544922 C 287.85546,44.912118 288.17577,44.1504 288.17578,43.259766 C 288.17577,42.384777 287.85546,41.626965 287.21484,40.986328 C 286.58202,40.345716 285.82421,40.025404 284.94141,40.025391 M 279.65625,36.779297 L 282.05859,39.158203 C 282.48046,38.85353 282.92578,38.626968 283.39453,38.478516 C 283.86328,38.322281 284.37109,38.244156 284.91797,38.244141 C 285.46484,38.244156 285.97655,38.322281 286.45313,38.478516 C 286.93749,38.626968 287.39062,38.85353 287.8125,39.158203 L 290.19141,36.779297 L 291.42188,38.033203 L 289.04297,40.435547 C 289.33983,40.849622 289.56249,41.294934 289.71094,41.771484 C 289.85936,42.240246 289.93358,42.736339 289.93359,43.259766 C 289.93358,43.783213 289.85936,44.279306 289.71094,44.748047 C 289.56249,45.216805 289.33983,45.666024 289.04297,46.095703 L 291.42188,48.498047 L 290.19141,49.716797 L 287.8125,47.337891 C 287.39062,47.650397 286.9414,47.880865 286.46484,48.029297 C 285.98827,48.17774 285.48046,48.251959 284.94141,48.251953 C 284.3789,48.251959 283.85937,48.17774 283.38281,48.029297 C 282.91406,47.880865 282.47265,47.650397 282.05859,47.337891 L 279.65625,49.716797 L 278.4375,48.498047 L 280.80469,46.095703 C 280.50781,45.673836 280.28515,45.23243 280.13672,44.771484 C 279.99609,44.302744 279.92578,43.798838 279.92578,43.259766 C 279.92578,42.736339 279.99609,42.240246 280.13672,41.771484 C 280.28515,41.294934 280.50781,40.849622 280.80469,40.435547 L 278.4375,38.033203 L 279.65625,36.779297" + id="text5928" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 352.875,47.701172 C 352.74217,49.662113 351.98436,51.220706 350.60156,52.376953 C 349.22655,53.533203 347.42968,54.111328 345.21094,54.111328 C 342.65624,54.111328 340.66796,53.314453 339.24609,51.720703 C 337.83203,50.126957 337.125,47.892584 337.125,45.017578 C 337.125,42.08009 337.84765,39.830092 339.29297,38.267578 C 340.73828,36.705095 342.8164,35.923846 345.52734,35.923828 C 347.73046,35.923846 349.46874,36.462908 350.74219,37.541016 C 352.02342,38.611343 352.72655,40.126967 352.85156,42.087891 L 349.34766,42.087891 C 349.19921,41.111341 348.80077,40.369154 348.15234,39.861328 C 347.50389,39.345717 346.6289,39.087905 345.52734,39.087891 C 343.96484,39.087905 342.77734,39.591811 341.96484,40.599609 C 341.15234,41.607434 340.74609,43.080089 340.74609,45.017578 C 340.74609,46.892585 341.14843,48.341802 341.95313,49.365234 C 342.76562,50.388675 343.91796,50.900393 345.41016,50.900391 C 346.48827,50.900393 347.37108,50.626956 348.05859,50.080078 C 348.74608,49.525395 349.19139,48.732427 349.39453,47.701172 L 352.875,47.701172" + id="text5946" /> + <path + transform="matrix(1.16233,0,-0.444745,0.860341,0,0)" + style="font-size:16.72912407px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 307.52845,53.268758 L 317.31434,53.268758 L 317.31434,54.894293 L 307.52845,54.894293 L 307.52845,53.268758 M 307.52845,49.756296 L 317.31434,49.756296 L 317.31434,51.381831 L 307.52845,51.381831 L 307.52845,49.756296" + id="text5956" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 411.45117,50.150391 L 411.45117,46.142578 L 408.63867,50.150391 L 411.45117,50.150391 M 411.45117,53.630859 L 411.45117,51.591797 L 406.98633,51.591797 L 406.98633,49.962891 L 410.90039,44.513672 L 413.51367,44.513672 L 413.51367,50.103516 L 414.73242,50.103516 L 414.73242,51.591797 L 413.51367,51.591797 L 413.51367,53.630859 L 411.45117,53.630859 M 398.58398,54.111328 L 408.7793,36.615234 L 410.70117,36.615234 L 400.48242,54.111328 L 398.58398,54.111328 M 397.78711,46.458984 L 397.78711,40.025391 L 395.26758,40.025391 L 395.26758,38.701172 L 395.44336,38.701172 C 396.36523,38.701187 397.0332,38.576187 397.44727,38.326172 C 397.86914,38.076187 398.11914,37.658219 398.19727,37.072266 L 399.88477,37.072266 L 399.88477,46.458984 L 397.78711,46.458984" + id="text5960" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 467.0918,53.630859 C 467.11522,52.779298 467.32225,52.064455 467.71289,51.486328 C 468.11131,50.900393 468.80663,50.31055 469.79883,49.716797 C 469.95506,49.630863 470.16991,49.50977 470.44336,49.353516 C 471.7949,48.595708 472.47068,47.861334 472.4707,47.150391 C 472.47068,46.736335 472.33006,46.40821 472.04883,46.166016 C 471.76756,45.923836 471.38475,45.802742 470.90039,45.802734 C 470.36912,45.802742 469.95506,45.95118 469.6582,46.248047 C 469.36913,46.544929 469.22459,46.966804 469.22461,47.513672 L 469.22461,47.607422 L 467.2793,47.607422 C 467.27928,46.529304 467.6035,45.70118 468.25195,45.123047 C 468.90038,44.537118 469.82616,44.24415 471.0293,44.244141 C 472.12303,44.24415 472.99412,44.505868 473.64258,45.029297 C 474.29881,45.552742 474.62693,46.251961 474.62695,47.126953 C 474.62693,47.751959 474.45506,48.294927 474.11133,48.755859 C 473.77537,49.208989 473.11522,49.72852 472.13086,50.314453 C 471.9199,50.439456 471.63084,50.607425 471.26367,50.818359 C 470.34959,51.341799 469.83397,51.744143 469.7168,52.025391 L 474.50977,52.025391 L 474.50977,53.630859 L 467.0918,53.630859 M 458.68945,54.111328 L 468.88477,36.615234 L 470.80664,36.615234 L 460.58789,54.111328 L 458.68945,54.111328 M 457.89258,46.458984 L 457.89258,40.025391 L 455.37305,40.025391 L 455.37305,38.701172 L 455.54883,38.701172 C 456.4707,38.701187 457.13867,38.576187 457.55273,38.326172 C 457.97461,38.076187 458.22461,37.658219 458.30273,37.072266 L 459.99023,37.072266 L 459.99023,46.458984 L 457.89258,46.458984" + id="text5967" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 531.83203,50.150391 L 531.83203,46.142578 L 529.01953,50.150391 L 531.83203,50.150391 M 531.83203,53.630859 L 531.83203,51.591797 L 527.36719,51.591797 L 527.36719,49.962891 L 531.28125,44.513672 L 533.89453,44.513672 L 533.89453,50.103516 L 535.11328,50.103516 L 535.11328,51.591797 L 533.89453,51.591797 L 533.89453,53.630859 L 531.83203,53.630859 M 518.96484,54.111328 L 529.16016,36.615234 L 531.08203,36.615234 L 520.86328,54.111328 L 518.96484,54.111328 M 514.88672,43.599609 L 516.89063,43.599609 C 516.91406,44.130869 517.0625,44.529306 517.33594,44.794922 C 517.61718,45.052743 518.03125,45.181649 518.57813,45.181641 C 519.10937,45.181649 519.51953,45.060555 519.80859,44.818359 C 520.09765,44.568368 520.24218,44.208994 520.24219,43.740234 C 520.24218,43.271495 520.07421,42.919933 519.73828,42.685547 C 519.40234,42.443371 518.90625,42.322277 518.25,42.322266 C 518.20312,42.322277 518.14453,42.326183 518.07422,42.333984 C 518.0039,42.341808 517.94922,42.345714 517.91016,42.345703 L 517.91016,41.033203 L 518.14453,41.033203 C 518.76171,41.033216 519.21484,40.931653 519.50391,40.728516 C 519.80078,40.517591 519.94921,40.193373 519.94922,39.755859 C 519.94921,39.388686 519.82421,39.099624 519.57422,38.888672 C 519.32421,38.669937 518.98437,38.560562 518.55469,38.560547 C 518.08593,38.560562 517.72265,38.685562 517.46484,38.935547 C 517.21484,39.177749 517.08984,39.525405 517.08984,39.978516 L 517.08984,40.048828 L 515.08594,40.048828 C 515.10156,39.087905 515.41797,38.353531 516.03516,37.845703 C 516.65234,37.330094 517.52343,37.072282 518.64844,37.072266 C 519.70312,37.072282 520.53906,37.302751 521.15625,37.763672 C 521.77343,38.216812 522.08202,38.833999 522.08203,39.615234 C 522.08202,40.02931 521.97655,40.392591 521.76563,40.705078 C 521.55468,41.009778 521.23827,41.263684 520.81641,41.466797 C 521.36327,41.677746 521.77343,41.970715 522.04688,42.345703 C 522.32812,42.712902 522.46874,43.154307 522.46875,43.669922 C 522.46874,44.607431 522.11718,45.349618 521.41406,45.896484 C 520.71874,46.443367 519.77343,46.716804 518.57813,46.716797 C 517.39062,46.716804 516.47656,46.451179 515.83594,45.919922 C 515.20312,45.380868 514.88672,44.615243 514.88672,43.623047 L 514.88672,43.599609" + id="text5973" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 586.63477,39.404297 L 586.63477,42.498047 L 583.36523,42.498047 L 583.36523,39.474609 C 583.36523,38.482437 583.66992,37.654313 584.2793,36.990234 C 584.88867,36.326189 585.67382,35.970721 586.63477,35.923828 L 586.63477,37.119141 C 586.04101,37.259782 585.59961,37.509782 585.31055,37.869141 C 585.02148,38.220719 584.87695,38.681656 584.87695,39.251953 L 584.87695,39.404297 L 586.63477,39.404297" + id="text5979" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 643.36523,39.474609 L 643.36523,36.369141 L 646.63477,36.369141 L 646.63477,39.427734 C 646.63476,40.412123 646.33007,41.240247 645.7207,41.912109 C 645.11132,42.576183 644.32617,42.931651 643.36523,42.978516 L 643.36523,41.771484 C 643.95898,41.630871 644.39648,41.384778 644.67773,41.033203 C 644.96679,40.673841 645.11132,40.201185 645.11133,39.615234 L 645.11133,39.474609 L 643.36523,39.474609" + id="text5985" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 706.89258,53.630859 L 703.50586,53.630859 L 703.50586,47.560547 L 703.27148,47.150391 L 698.00977,47.150391 L 698.00977,45.826172 L 702.49805,45.826172 L 701.64258,44.337891 L 698.00977,44.337891 L 698.00977,43.025391 L 700.86914,43.025391 L 697.61133,37.330078 L 701.41992,37.330078 L 705.19336,44.724609 L 708.69727,37.330078 L 712.27148,37.330078 L 709.27148,43.025391 L 712.00195,43.025391 L 712.00195,44.337891 L 708.58008,44.337891 L 707.7832,45.826172 L 712.00195,45.826172 L 712.00195,47.150391 L 707.0918,47.150391 L 706.89258,47.560547 L 706.89258,53.630859" + id="text5991" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 764.97656,19.306641 C 765.46093,19.306645 765.8789,19.482426 766.23047,19.833984 C 766.58202,20.18555 766.7578,20.603519 766.75781,21.087891 C 766.7578,21.564455 766.58202,21.974611 766.23047,22.318359 C 765.8789,22.66211 765.46093,22.833985 764.97656,22.833984 C 764.48437,22.833985 764.06249,22.666017 763.71094,22.330078 C 763.36718,21.994142 763.1953,21.58008 763.19531,21.087891 C 763.1953,20.595706 763.36718,20.177738 763.71094,19.833984 C 764.06249,19.482426 764.48437,19.306645 764.97656,19.306641 M 757.94531,15.298828 L 771.98438,15.298828 L 771.98438,17.630859 L 757.94531,17.630859 L 757.94531,15.298828 M 764.97656,10.095703 C 765.46093,10.095717 765.8789,10.271498 766.23047,10.623047 C 766.58202,10.96681 766.7578,11.380872 766.75781,11.865234 C 766.7578,12.357433 766.58202,12.779308 766.23047,13.130859 C 765.88671,13.47462 765.46874,13.646494 764.97656,13.646484 C 764.48437,13.646494 764.06249,13.47462 763.71094,13.130859 C 763.36718,12.779308 763.1953,12.357433 763.19531,11.865234 C 763.1953,11.373059 763.36718,10.955091 763.71094,10.611328 C 764.06249,10.267591 764.48437,10.095717 764.97656,10.095703 M 759.84375,39.544922 L 765.11719,44.818359 L 770.40234,39.544922 L 772.05469,41.173828 L 766.78125,46.482422 L 772.05469,51.755859 L 770.40234,53.396484 L 765.11719,48.111328 L 759.84375,53.396484 L 758.20313,51.755859 L 763.48828,46.482422 L 758.20313,41.173828 L 759.84375,39.544922" + id="text5997" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 134.9707,69.826172 L 132.58008,77.173828 L 137.37305,77.173828 L 134.9707,69.826172 M 132.9082,66.369141 L 137.00977,66.369141 L 143.23242,83.630859 L 139.50586,83.630859 L 138.33398,80.080078 L 131.64258,80.080078 L 130.50586,83.630859 L 126.76758,83.630859 L 132.9082,66.369141 M 135.70898,64.166016 L 135.70898,61.283203 L 138.35742,61.283203 L 138.35742,64.166016 L 135.70898,64.166016 M 131.63086,64.166016 L 131.63086,61.283203 L 134.2793,61.283203 L 134.2793,64.166016 L 131.63086,64.166016" + id="text6003" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 194.9707,62.126953 C 194.5957,62.126975 194.27538,62.267599 194.00977,62.548828 C 193.74413,62.822286 193.61132,63.154317 193.61133,63.544922 C 193.61132,63.927754 193.74023,64.251973 193.99805,64.517578 C 194.26366,64.783222 194.58788,64.916034 194.9707,64.916016 C 195.36132,64.916034 195.69335,64.783222 195.9668,64.517578 C 196.24804,64.24416 196.38866,63.919942 196.38867,63.544922 C 196.38866,63.16213 196.24804,62.830099 195.9668,62.548828 C 195.69335,62.267599 195.36132,62.126975 194.9707,62.126953 M 194.9707,60.521484 C 195.81444,60.521507 196.52929,60.814476 197.11523,61.400391 C 197.70116,61.978537 197.99413,62.685568 197.99414,63.521484 C 197.99413,64.357441 197.70116,65.068378 197.11523,65.654297 C 196.52929,66.232439 195.81444,66.521501 194.9707,66.521484 C 194.13476,66.521501 193.42773,66.232439 192.84961,65.654297 C 192.27929,65.07619 191.99414,64.365254 191.99414,63.521484 C 191.99414,62.677755 192.27929,61.966819 192.84961,61.388672 C 193.42773,60.81057 194.13476,60.521507 194.9707,60.521484 M 192.7207,67.072266 L 197.23242,67.072266 L 203.23242,83.630859 L 199.50586,83.630859 L 198.33398,80.080078 L 191.64258,80.080078 L 190.50586,83.630859 L 186.76758,83.630859 L 192.7207,67.072266 M 194.9707,69.826172 L 192.58008,77.173828 L 197.37305,77.173828 L 194.9707,69.826172" + id="text6007" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 248.52539,83.630859 L 248.52539,66.369141 L 261.05273,66.369141 L 261.05273,69.369141 L 252.0293,69.369141 L 252.0293,73.048828 L 260.2793,73.048828 L 260.2793,76.001953 L 252.0293,76.001953 L 252.0293,80.443359 L 261.47461,80.443359 L 261.47461,83.630859 L 248.52539,83.630859 M 258.24023,60.521484 L 254.57227,64.857422 L 252.9082,64.857422 L 255.2168,60.521484 L 258.24023,60.521484" + id="text6011" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 313.72266,101.49056 L 313.72266,104.29134 L 314.88281,104.29134 C 315.5703,104.29135 316.07421,104.18198 316.39453,103.96322 C 316.71483,103.74448 316.87499,103.40073 316.875,102.93197 C 316.87499,102.43979 316.70311,102.07651 316.35938,101.84212 C 316.01561,101.60776 315.48436,101.49057 314.76563,101.49056 L 313.72266,101.49056 M 311.37891,100.00228 L 315.16406,100.00228 C 316.53905,100.00229 317.5703,100.23667 318.25781,100.70541 C 318.95311,101.16636 319.30077,101.85776 319.30078,102.77962 C 319.30077,103.42026 319.11327,103.96713 318.73828,104.42025 C 318.36327,104.87338 317.84374,105.18198 317.17969,105.34603 L 319.34766,109.67025 L 316.72266,109.67025 L 314.88281,105.70931 L 313.72266,105.70931 L 313.72266,109.67025 L 311.37891,109.67025 L 311.37891,100.00228 M 315,97.717125 C 314.0078,97.717141 313.08593,97.892922 312.23438,98.244469 C 311.38281,98.588234 310.61718,99.099952 309.9375,99.779625 C 309.22656,100.49058 308.67968,101.29917 308.29688,102.20541 C 307.91406,103.10385 307.72265,104.03354 307.72266,104.99447 C 307.72265,105.96323 307.90234,106.8851 308.26172,107.76009 C 308.62109,108.62729 309.14062,109.40072 309.82031,110.08041 C 310.51562,110.79135 311.30859,111.33822 312.19922,111.72103 C 313.08984,112.09603 314.01562,112.28353 314.97656,112.28353 C 315.91405,112.28353 316.82421,112.09994 317.70703,111.73275 C 318.59764,111.36556 319.40624,110.83822 320.13281,110.15072 C 320.81248,109.49447 321.33983,108.72885 321.71484,107.85384 C 322.08983,106.97885 322.27733,106.0726 322.27734,105.13509 C 322.27733,104.09604 322.10155,103.13901 321.75,102.264 C 321.40623,101.38901 320.89061,100.60386 320.20313,99.908531 C 319.49999,99.181983 318.70702,98.635109 317.82422,98.267906 C 316.94921,97.900734 316.0078,97.717141 315,97.717125 M 314.97656,96.275719 C 316.17968,96.275736 317.31249,96.502298 318.375,96.955406 C 319.4453,97.400735 320.39842,98.049172 321.23438,98.900719 C 322.03905,99.713233 322.65233,100.64292 323.07422,101.68978 C 323.49608,102.73667 323.70701,103.84604 323.70703,105.01791 C 323.70701,106.20541 323.48826,107.33041 323.05078,108.39291 C 322.61326,109.4476 321.97655,110.37728 321.14063,111.18197 C 320.30467,112.00228 319.35155,112.63119 318.28125,113.06869 C 317.21874,113.50619 316.11718,113.72494 314.97656,113.72494 C 313.81249,113.72494 312.69921,113.49838 311.63672,113.04525 C 310.57421,112.59213 309.625,111.93978 308.78906,111.08822 C 307.97656,110.26791 307.35547,109.33822 306.92578,108.29916 C 306.5039,107.25229 306.29297,106.15854 306.29297,105.01791 C 306.29297,104.22104 306.39844,103.4476 306.60938,102.69759 C 306.82031,101.93979 307.13672,101.20151 307.55859,100.48275 C 308.34765,99.154639 309.39062,98.12339 310.6875,97.389 C 311.98437,96.646829 313.41405,96.275736 314.97656,96.275719" + id="text6015" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 372.0293,69.064453 L 376.06055,69.064453 C 377.84179,69.064468 379.18944,69.505874 380.10352,70.388672 C 381.01756,71.263684 381.47459,72.556652 381.47461,74.267578 C 381.47459,75.939461 381.02538,77.228522 380.12695,78.134766 C 379.23632,79.033208 377.95897,79.482426 376.29492,79.482422 L 372.0293,79.482422 L 372.0293,83.630859 L 368.52539,83.630859 L 368.52539,66.369141 L 372.0293,66.369141 L 372.0293,69.064453 M 372.05273,76.599609 L 375.47461,76.599609 C 376.4121,76.599616 377.09179,76.416023 377.51367,76.048828 C 377.93554,75.673836 378.14647,75.080087 378.14648,74.267578 C 378.14647,73.509776 377.93554,72.939464 377.51367,72.556641 C 377.09179,72.166027 376.47069,71.970715 375.65039,71.970703 L 372.05273,71.970703 L 372.05273,76.599609" + id="text6019" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 428.08594,66.322266 L 431.67188,66.322266 L 431.67188,77.150391 C 431.67187,78.486333 431.93749,79.462895 432.46875,80.080078 C 432.99999,80.689456 433.84374,80.994143 435,80.994141 C 436.17187,80.994143 437.02343,80.689456 437.55469,80.080078 C 438.09374,79.470707 438.36327,78.494146 438.36328,77.150391 L 438.36328,66.322266 L 441.91406,66.322266 L 441.91406,77.537109 C 441.91405,79.654301 441.3203,81.279299 440.13281,82.412109 C 438.95311,83.544922 437.24999,84.111328 435.02344,84.111328 C 432.78124,84.111328 431.0625,83.548828 429.86719,82.423828 C 428.67969,81.291018 428.08594,79.662113 428.08594,77.537109 L 428.08594,66.322266 M 435.73828,64.166016 L 435.73828,61.283203 L 438.38672,61.283203 L 438.38672,64.166016 L 435.73828,64.166016 M 431.66016,64.166016 L 431.66016,61.283203 L 434.30859,61.283203 L 434.30859,64.166016 L 431.66016,64.166016" + id="text6023" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 488.08594,66.105469 L 491.67188,66.105469 L 491.67188,76.933594 C 491.67187,78.269536 491.93749,79.246098 492.46875,79.863281 C 492.99999,80.472659 493.84374,80.777346 495,80.777344 C 496.17187,80.777346 497.02343,80.472659 497.55469,79.863281 C 498.09374,79.25391 498.36327,78.277349 498.36328,76.933594 L 498.36328,66.105469 L 501.91406,66.105469 L 501.91406,77.320313 C 501.91405,79.437504 501.3203,81.062502 500.13281,82.195313 C 498.95311,83.328125 497.24999,83.894531 495.02344,83.894531 C 492.78124,83.894531 491.0625,83.332031 489.86719,82.207031 C 488.67969,81.074221 488.08594,79.445316 488.08594,77.320313 L 488.08594,66.105469 M 498.45703,60.304688 L 494.78906,64.640625 L 493.125,64.640625 L 495.43359,60.304688 L 498.45703,60.304688" + id="text6029" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 552.43945,83.630859 L 552.43945,66.369141 L 555.99023,66.369141 L 555.99023,83.630859 L 552.43945,83.630859 M 557.66602,60.521484 L 553.99805,64.857422 L 552.33398,64.857422 L 554.64258,60.521484 L 557.66602,60.521484" + id="text6033" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 610.18359,75 C 610.18359,76.898444 610.60546,78.375005 611.44922,79.429688 C 612.29296,80.476566 613.47265,81.000003 614.98828,81 C 616.51952,81.000003 617.71093,80.476566 618.5625,79.429688 C 619.41405,78.375005 619.83983,76.898444 619.83984,75 C 619.83983,73.101573 619.41405,71.628918 618.5625,70.582031 C 617.71093,69.527358 616.51952,69.000015 614.98828,69 C 613.47265,69.000015 612.29296,69.523452 611.44922,70.570313 C 610.60546,71.617199 610.18359,73.093761 610.18359,75 M 606.5625,75 C 606.5625,72.210949 607.32031,70.000014 608.83594,68.367188 C 610.35937,66.726579 612.41015,65.906268 614.98828,65.90625 C 617.56639,65.906268 619.61717,66.726579 621.14063,68.367188 C 622.67186,70.007826 623.43748,72.218761 623.4375,75 C 623.43748,77.781256 622.67186,79.992191 621.14063,81.632813 C 619.61717,83.273438 617.56639,84.09375 614.98828,84.09375 C 612.41015,84.09375 610.35937,83.273438 608.83594,81.632813 C 607.32031,79.992191 606.5625,77.781256 606.5625,75 M 618.44531,60.503906 L 614.77734,64.839844 L 613.11328,64.839844 L 615.42188,60.503906 L 618.44531,60.503906" + id="text6037" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 670.18359,75.017578 C 670.18359,76.916022 670.60546,78.392583 671.44922,79.447266 C 672.29296,80.494144 673.47265,81.017581 674.98828,81.017578 C 676.51952,81.017581 677.71093,80.494144 678.5625,79.447266 C 679.41405,78.392583 679.83983,76.916022 679.83984,75.017578 C 679.83983,73.119151 679.41405,71.646496 678.5625,70.599609 C 677.71093,69.544936 676.51952,69.017593 674.98828,69.017578 C 673.47265,69.017593 672.29296,69.54103 671.44922,70.587891 C 670.60546,71.634778 670.18359,73.111339 670.18359,75.017578 M 666.5625,75.017578 C 666.5625,72.228527 667.32031,70.017592 668.83594,68.384766 C 670.35937,66.744158 672.41015,65.923846 674.98828,65.923828 C 677.56639,65.923846 679.61717,66.744158 681.14063,68.384766 C 682.67186,70.025404 683.43748,72.23634 683.4375,75.017578 C 683.43748,77.798834 682.67186,80.009769 681.14063,81.650391 C 679.61717,83.291016 677.56639,84.111328 674.98828,84.111328 C 672.41015,84.111328 670.35937,83.291016 668.83594,81.650391 C 667.32031,80.009769 666.5625,77.798834 666.5625,75.017578 M 675.72656,64.166016 L 675.72656,61.283203 L 678.375,61.283203 L 678.375,64.166016 L 675.72656,64.166016 M 671.64844,64.166016 L 671.64844,61.283203 L 674.29688,61.283203 L 674.29688,64.166016 L 671.64844,64.166016" + id="text6041" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 735.5332,106.35352 L 735.5332,103.35352 L 739.44727,99.966797 L 739.44727,102.75586 L 737.04492,104.8418 L 739.44727,106.92773 L 739.44727,109.74023 L 735.5332,106.35352 M 730.4707,106.35352 L 730.4707,103.35352 L 734.4082,99.966797 L 734.4082,102.75586 L 732.00586,104.8418 L 734.4082,106.92773 L 734.4082,109.74023 L 730.4707,106.35352" + id="text6045" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 799.44727,103.3418 L 799.44727,106.3418 L 795.5332,109.72852 L 795.5332,106.93945 L 797.93555,104.83008 L 795.5332,102.76758 L 795.5332,99.955078 L 799.44727,103.3418 M 794.4082,103.3418 L 794.4082,106.3418 L 790.4707,109.72852 L 790.4707,106.93945 L 792.86133,104.83008 L 790.4707,102.76758 L 790.4707,99.955078 L 794.4082,103.3418" + id="text6051" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 883.81641,76.535881 L 886.23047,76.535881 L 886.23047,85.418694 L 883.81641,85.418694 L 883.81641,76.535881 M 883.81641,64.535881 L 886.23047,64.535881 L 886.23047,73.418694 L 883.81641,73.418694 L 883.81641,64.535881 M 877.98047,101.19213 L 892.01953,101.19213 L 892.01953,107.07494 L 889.6875,107.07494 L 889.6875,103.48901 L 877.98047,103.48901 L 877.98047,101.19213" + id="text6057" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 149.9707,129.82617 L 147.58008,137.17383 L 152.37305,137.17383 L 149.9707,129.82617 M 147.9082,126.36914 L 152.00977,126.36914 L 158.23242,143.63086 L 154.50586,143.63086 L 153.33398,140.08008 L 146.64258,140.08008 L 145.50586,143.63086 L 141.76758,143.63086 L 147.9082,126.36914 M 153.42773,120.52148 L 149.75977,124.85742 L 148.0957,124.85742 L 150.4043,120.52148 L 153.42773,120.52148" + id="text6065" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 211.40625,137.91797 C 211.71874,137.73829 211.95312,137.53907 212.10938,137.32031 C 212.26562,137.10157 212.34374,136.86719 212.34375,136.61719 C 212.34374,136.31251 212.2539,136.0547 212.07422,135.84375 C 211.89452,135.62501 211.52343,135.3711 210.96094,135.08203 L 207.85547,133.47656 C 207.55078,133.65626 207.3164,133.85938 207.15234,134.08594 C 206.99609,134.31251 206.91797,134.5547 206.91797,134.8125 C 206.91797,135.1172 207.03125,135.38673 207.25781,135.62109 C 207.49218,135.84766 208.0039,136.16407 208.79297,136.57031 L 211.40625,137.91797 M 205.03125,141.75 L 207.92578,141.75 C 207.98828,142.35938 208.16796,142.8125 208.46484,143.10938 C 208.76953,143.40625 209.19921,143.55469 209.75391,143.55469 C 210.26952,143.55469 210.67968,143.43359 210.98438,143.19141 C 211.28905,142.94141 211.4414,142.60547 211.44141,142.18359 C 211.4414,141.83985 211.32812,141.54297 211.10156,141.29297 C 210.87499,141.03516 210.42577,140.74219 209.75391,140.41406 L 206.95313,138.99609 C 206.0625,138.55079 205.39844,138.03907 204.96094,137.46094 C 204.52344,136.88282 204.30469,136.23438 204.30469,135.51563 C 204.30469,134.82032 204.47266,134.21095 204.80859,133.6875 C 205.15234,133.15626 205.65625,132.71485 206.32031,132.36328 C 205.92969,132.01173 205.64062,131.62892 205.45313,131.21484 C 205.26562,130.79298 205.17187,130.32814 205.17188,129.82031 C 205.17187,128.64845 205.57422,127.70705 206.37891,126.99609 C 207.18359,126.27736 208.2539,125.91799 209.58984,125.91797 C 210.96484,125.91799 212.04296,126.26955 212.82422,126.97266 C 213.60546,127.6758 214.0078,128.64845 214.03125,129.89063 L 211.26563,129.89063 C 211.24999,129.3672 211.09374,128.96876 210.79688,128.69531 C 210.50781,128.42189 210.08984,128.28517 209.54297,128.28516 C 209.05859,128.28517 208.68359,128.39064 208.41797,128.60156 C 208.16015,128.81251 208.03125,129.10939 208.03125,129.49219 C 208.03125,129.8047 208.18359,130.09767 208.48828,130.37109 C 208.80078,130.63673 209.35937,130.95704 210.16406,131.33203 L 212.13281,132.24609 C 213.1328,132.72267 213.87108,133.25392 214.34766,133.83984 C 214.82421,134.41798 215.06249,135.08595 215.0625,135.84375 C 215.06249,136.55469 214.8828,137.17579 214.52344,137.70703 C 214.17186,138.23047 213.66405,138.63672 213,138.92578 C 213.45312,139.32422 213.79296,139.76563 214.01953,140.25 C 214.24608,140.73438 214.35936,141.26563 214.35938,141.84375 C 214.35936,143.04688 213.92968,144.03906 213.07031,144.82031 C 212.21093,145.60937 211.10546,146.0039 209.75391,146.00391 C 208.26953,146.0039 207.1289,145.64453 206.33203,144.92578 C 205.53515,144.20703 205.10156,143.14844 205.03125,141.75 M 203.97656,173.625 L 203.97656,160.59375 C 203.97656,159.29689 204.48047,158.25002 205.48828,157.45313 C 206.49609,156.64845 207.83984,156.24611 209.51953,156.24609 C 211.23046,156.24611 212.5703,156.63674 213.53906,157.41797 C 214.5078,158.19923 214.99217,159.27345 214.99219,160.64063 C 214.99217,161.48439 214.84764,162.17579 214.55859,162.71484 C 214.27733,163.25392 213.83983,163.66798 213.24609,163.95703 C 214.16796,164.32423 214.85936,164.86329 215.32031,165.57422 C 215.78905,166.28516 216.02342,167.16016 216.02344,168.19922 C 216.02342,169.94922 215.51952,171.36328 214.51172,172.44141 C 213.5039,173.51953 212.18358,174.05859 210.55078,174.05859 C 210.32421,174.05859 210.0703,174.04687 209.78906,174.02344 C 209.51562,174 209.21874,173.96484 208.89844,173.91797 L 208.89844,171.17578 C 208.99999,171.19141 209.10156,171.20313 209.20313,171.21094 C 209.31249,171.21875 209.47265,171.22266 209.68359,171.22266 C 210.60546,171.22266 211.3164,170.96875 211.81641,170.46094 C 212.3164,169.94532 212.5664,169.21485 212.56641,168.26953 C 212.5664,167.35548 212.29296,166.66016 211.74609,166.18359 C 211.20702,165.70704 210.41796,165.46876 209.37891,165.46875 L 209.0625,165.46875 L 209.07422,163.06641 C 209.12109,163.07423 209.17187,163.08204 209.22656,163.08984 C 209.28124,163.08985 209.36327,163.08985 209.47266,163.08984 C 210.16796,163.08985 210.6953,162.91798 211.05469,162.57422 C 211.42187,162.22267 211.60546,161.71486 211.60547,161.05078 C 211.60546,160.38673 211.41405,159.88283 211.03125,159.53906 C 210.65624,159.18751 210.10546,159.01173 209.37891,159.01172 C 208.70703,159.01173 208.19531,159.20705 207.84375,159.59766 C 207.49218,159.98048 207.3164,160.54298 207.31641,161.28516 L 207.31641,173.625 L 203.97656,173.625" + id="text6073" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 267.09961,140.51367 L 269.94727,140.51367 C 271.60351,140.51367 272.80272,140.08008 273.54492,139.21289 C 274.2871,138.34571 274.65819,136.94727 274.6582,135.01758 C 274.65819,133.09571 274.31053,131.68165 273.61523,130.77539 C 272.92772,129.86134 271.8496,129.40431 270.38086,129.4043 L 267.09961,129.4043 L 267.09961,133.23633 L 270.88477,133.23633 L 270.88477,135.47461 L 267.09961,135.47461 L 267.09961,140.51367 M 263.61914,143.63086 L 263.61914,135.47461 L 261.74414,135.47461 L 261.74414,133.23633 L 263.61914,133.23633 L 263.61914,126.36914 L 270.4043,126.36914 C 273.04491,126.36916 275.01366,127.084 276.31055,128.51367 C 277.60741,129.93556 278.25584,132.10353 278.25586,135.01758 C 278.25584,136.60352 278.01756,137.99805 277.54102,139.20117 C 277.07225,140.4043 276.38084,141.36914 275.4668,142.0957 C 274.77928,142.64258 273.99413,143.03711 273.11133,143.2793 C 272.23632,143.51367 271.00585,143.63086 269.41992,143.63086 L 263.61914,143.63086" + id="text6077" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 626.72461,139.55273 C 627.17773,140.04493 627.68945,140.41211 628.25977,140.6543 C 628.83007,140.89649 629.47069,141.01758 630.18164,141.01758 C 631.71288,141.01758 632.90428,140.49414 633.75586,139.44727 C 634.60741,138.39258 635.03319,136.91602 635.0332,135.01758 C 635.03319,134.24415 634.96288,133.54493 634.82227,132.91992 C 634.68163,132.28712 634.4785,131.73634 634.21289,131.26758 L 626.72461,139.55273 M 625.98633,138.36914 L 633.39258,130.21289 C 632.9785,129.81447 632.50585,129.51759 631.97461,129.32227 C 631.44335,129.11916 630.84569,129.01759 630.18164,129.01758 C 628.66601,129.01759 627.48632,129.54103 626.64258,130.58789 C 625.79882,131.63478 625.37695,133.11134 625.37695,135.01758 C 625.37695,135.72071 625.42382,136.34571 625.51758,136.89258 C 625.61914,137.43946 625.77539,137.93165 625.98633,138.36914 M 621.36914,143.36133 L 623.51367,140.9707 C 622.91992,140.16602 622.47851,139.27149 622.18945,138.28711 C 621.90039,137.29493 621.75586,136.20509 621.75586,135.01758 C 621.75586,132.22853 622.51367,130.01759 624.0293,128.38477 C 625.55273,126.74416 627.60351,125.92385 630.18164,125.92383 C 631.28319,125.92385 632.27147,126.06447 633.14648,126.3457 C 634.02928,126.62697 634.84178,127.06056 635.58398,127.64648 L 637.30664,125.70117 L 638.45508,126.73242 L 636.63867,128.70117 C 637.30272,129.5215 637.79881,130.45509 638.12695,131.50195 C 638.46287,132.54884 638.63084,133.72071 638.63086,135.01758 C 638.63084,137.79883 637.86912,140.00977 636.3457,141.65039 C 634.82225,143.29102 632.76757,144.11133 630.18164,144.11133 C 629.01757,144.11133 627.96679,143.94727 627.0293,143.61914 C 626.0996,143.29102 625.26367,142.79102 624.52148,142.11914 L 622.50586,144.4043 L 621.36914,143.36133" + id="text6081" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 690,127.98633 C 689.42968,127.98634 688.9414,128.18556 688.53516,128.58398 C 688.13672,128.98244 687.9375,129.4629 687.9375,130.02539 C 687.9375,130.60353 688.13672,131.09181 688.53516,131.49023 C 688.93359,131.88868 689.42187,132.0879 690,132.08789 C 690.5625,132.0879 691.04296,131.88478 691.44141,131.47852 C 691.83984,131.07228 692.03906,130.5879 692.03906,130.02539 C 692.03906,129.4629 691.83984,128.98244 691.44141,128.58398 C 691.04296,128.18556 690.5625,127.98634 690,127.98633 M 690,126.47461 C 690.98437,126.47463 691.82031,126.82619 692.50781,127.5293 C 693.20312,128.22462 693.55077,129.06447 693.55078,130.04883 C 693.55077,131.0254 693.20312,131.86134 692.50781,132.55664 C 691.81249,133.25196 690.96875,133.59962 689.97656,133.59961 C 688.99218,133.59962 688.15625,133.25587 687.46875,132.56836 C 686.78906,131.88087 686.44922,131.04103 686.44922,130.04883 C 686.44922,129.05666 686.79297,128.21291 687.48047,127.51758 C 688.17578,126.82228 689.01562,126.47463 690,126.47461 M 695.51953,156.29883 L 695.51953,157.59961 L 694.19531,157.59961 L 694.19531,173.63086 L 692.42578,173.63086 L 692.42578,157.59961 L 690.57422,157.59961 L 690.57422,173.63086 L 688.78125,173.63086 L 688.78125,164.44336 C 687.47656,164.39649 686.43359,164.00196 685.65234,163.25977 C 684.87109,162.51759 684.48047,161.56056 684.48047,160.38867 C 684.48047,159.15431 684.89844,158.16603 685.73438,157.42383 C 686.57031,156.67385 687.67968,156.29885 689.0625,156.29883 L 695.51953,156.29883" + id="text6085" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 373.13672,6.5214844 L 376.08984,6.5214844 L 381.72656,13.095703 L 378.97266,13.095703 L 374.625,8.7480469 L 370.25391,13.095703 L 367.5,13.095703 L 373.13672,6.5214844" + id="text6091" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 750.67969,128.67773 L 750.67969,125.79492 L 753.32813,125.79492 L 753.32813,128.67773 L 750.67969,128.67773 M 746.60156,128.67773 L 746.60156,125.79492 L 749.25,125.79492 L 749.25,128.67773 L 746.60156,128.67773 M 753.39844,155.0332 L 749.73047,159.36914 L 748.06641,159.36914 L 750.375,155.0332 L 753.39844,155.0332" + id="text6099" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 171.07031,197.29102 L 175.92188,197.29102 L 175.92188,189.29883 L 173.97656,189.29883 L 171.07031,197.29102 M 165,203.63086 L 171.80859,186.36914 L 187.81641,186.36914 L 187.81641,189.36914 L 179.34375,189.36914 L 179.34375,193.04883 L 187.05469,193.04883 L 187.05469,196.00195 L 179.34375,196.00195 L 179.34375,200.44336 L 188.25,200.44336 L 188.25,203.63086 L 175.92188,203.63086 L 175.92188,200.08008 L 170.0625,200.08008 L 168.76172,203.63086 L 165,203.63086" + id="text6105" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 300.46875,193.23633 C 300.32031,193.22071 300.20312,193.20899 300.11719,193.20117 C 300.03906,193.19337 299.96484,193.18946 299.89453,193.18945 C 299.05859,193.18946 298.42578,193.53321 297.99609,194.2207 C 297.5664,194.90821 297.35156,195.92384 297.35156,197.26758 C 297.35156,198.04102 297.4375,198.70899 297.60938,199.27148 C 297.78906,199.83399 298.04687,200.28711 298.38281,200.63086 L 300.46875,193.23633 M 296.68359,206.49023 L 297.48047,203.63086 C 296.30859,203.13867 295.42187,202.35352 294.82031,201.27539 C 294.21875,200.19727 293.91797,198.85352 293.91797,197.24414 C 293.91797,195.11134 294.45312,193.43946 295.52344,192.22852 C 296.60156,191.01759 298.07421,190.41212 299.94141,190.41211 C 300.15234,190.41212 300.35937,190.41994 300.5625,190.43555 C 300.76562,190.45119 300.96874,190.47462 301.17188,190.50586 L 301.69922,188.56055 L 302.97656,188.56055 L 302.34375,190.78711 C 303.32811,191.09181 304.09765,191.63478 304.65234,192.41602 C 305.20702,193.18946 305.52733,194.17774 305.61328,195.38086 L 302.32031,195.36914 C 302.28124,194.98634 302.1914,194.65821 302.05078,194.38477 C 301.91796,194.10353 301.72265,193.85743 301.46484,193.64648 L 299.36719,201.13477 C 299.38281,201.13477 299.40624,201.13867 299.4375,201.14648 C 299.67187,201.16992 299.85156,201.18164 299.97656,201.18164 C 300.66406,201.18164 301.19921,200.99024 301.58203,200.60742 C 301.97265,200.22461 302.23437,199.62305 302.36719,198.80273 L 305.66016,198.80273 C 305.54296,200.41993 304.96874,201.70117 303.9375,202.64648 C 302.91405,203.5918 301.59374,204.06445 299.97656,204.06445 C 299.76562,204.06445 299.55077,204.05664 299.33203,204.04102 C 299.11328,204.02539 298.88671,204.00195 298.65234,203.9707 L 297.96094,206.49023 L 296.68359,206.49023 M 304.19531,223.0957 L 301.99219,223.0957 C 301.92968,222.54884 301.72264,222.12696 301.37109,221.83008 C 301.01952,221.5254 300.55468,221.37306 299.97656,221.37305 C 299.26562,221.37306 298.70702,221.69337 298.30078,222.33398 C 297.89452,222.96681 297.6914,223.85353 297.69141,224.99414 C 297.6914,226.14259 297.89452,227.01758 298.30078,227.61914 C 298.70702,228.22071 299.29687,228.52149 300.07031,228.52148 C 300.64061,228.52149 301.09765,228.35743 301.44141,228.0293 C 301.78514,227.70118 301.99218,227.23633 302.0625,226.63477 L 304.32422,226.62305 C 304.2617,227.70899 303.83592,228.58008 303.04688,229.23633 C 302.2578,229.89258 301.24218,230.22071 300,230.2207 C 298.54687,230.22071 297.39843,229.75977 296.55469,228.83789 C 295.71874,227.91602 295.30078,226.65821 295.30078,225.06445 C 295.30078,223.45509 295.72656,222.17384 296.57813,221.2207 C 297.43749,220.25978 298.58593,219.77931 300.02344,219.7793 C 301.21093,219.77931 302.18749,220.084 302.95313,220.69336 C 303.72655,221.30275 304.14061,222.10353 304.19531,223.0957 M 300,217.7168 C 298.99999,217.71681 298.06249,217.8965 297.1875,218.25586 C 296.32031,218.61525 295.54687,219.13869 294.86719,219.82617 C 294.17187,220.52931 293.64062,221.32618 293.27344,222.2168 C 292.90625,223.09962 292.72265,224.0254 292.72266,224.99414 C 292.72265,225.97071 292.90625,226.89649 293.27344,227.77148 C 293.64062,228.64649 294.17187,229.43164 294.86719,230.12695 C 295.55468,230.81446 296.33984,231.3418 297.22266,231.70898 C 298.10546,232.07617 299.03124,232.25977 300,232.25977 C 300.96874,232.25977 301.89452,232.07617 302.77734,231.70898 C 303.66796,231.3418 304.46874,230.80664 305.17969,230.10352 C 305.86717,229.43164 306.3867,228.66211 306.73828,227.79492 C 307.09764,226.92774 307.27733,225.99415 307.27734,224.99414 C 307.27733,224.00978 307.09373,223.08009 306.72656,222.20508 C 306.36717,221.32228 305.84373,220.53712 305.15625,219.84961 C 304.46092,219.15431 303.67577,218.62697 302.80078,218.26758 C 301.92577,217.90041 300.99218,217.71681 300,217.7168 M 299.97656,216.27539 C 301.16405,216.27541 302.28514,216.49416 303.33984,216.93164 C 304.40233,217.36916 305.35155,218.00587 306.1875,218.8418 C 307.0078,219.66212 307.63279,220.60353 308.0625,221.66602 C 308.49217,222.72071 308.70701,223.8379 308.70703,225.01758 C 308.70701,226.20509 308.49217,227.31446 308.0625,228.3457 C 307.64061,229.37696 307.01561,230.29883 306.1875,231.11133 C 305.3203,231.95508 304.35155,232.60352 303.28125,233.05664 C 302.21093,233.50195 301.10936,233.72461 299.97656,233.72461 C 298.82812,233.72461 297.73046,233.50586 296.68359,233.06836 C 295.64453,232.62305 294.70312,231.97852 293.85938,231.13477 C 293.02343,230.30664 292.38672,229.36914 291.94922,228.32227 C 291.51172,227.26758 291.29297,226.16602 291.29297,225.01758 C 291.29297,223.85353 291.51172,222.74415 291.94922,221.68945 C 292.38672,220.62697 293.02343,219.66994 293.85938,218.81836 C 294.67968,217.99025 295.60937,217.36134 296.64844,216.93164 C 297.68749,216.49416 298.79687,216.27541 299.97656,216.27539" + id="text6109" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 472.88672,203.63086 L 472.88672,186.36914 L 476.60156,186.36914 L 483.60938,198.22852 L 483.60938,186.36914 L 487.11328,186.36914 L 487.11328,203.63086 L 483.44531,203.63086 L 476.39063,191.77148 L 476.39063,203.63086 L 472.88672,203.63086 M 483.82031,181.0957 C 483.61717,182.07229 483.31639,182.79494 482.91797,183.26367 C 482.51952,183.72463 482.0078,183.9551 481.38281,183.95508 C 481.21874,183.9551 481.0664,183.94729 480.92578,183.93164 C 480.78515,183.90822 480.64452,183.87307 480.50391,183.82617 L 479.48438,183.52148 C 479.33593,183.48244 479.19921,183.4551 479.07422,183.43945 C 478.94921,183.41604 478.82812,183.40432 478.71094,183.4043 C 478.44531,183.40432 478.23046,183.47463 478.06641,183.61523 C 477.90234,183.75588 477.77343,183.98635 477.67969,184.30664 L 476.39063,184.30664 C 476.57812,183.36135 476.86718,182.66604 477.25781,182.2207 C 477.64843,181.77541 478.15624,181.55276 478.78125,181.55273 C 478.9453,181.55276 479.10937,181.56838 479.27344,181.59961 C 479.43749,181.62307 479.60937,181.66213 479.78906,181.7168 L 480.87891,182.00977 C 480.97265,182.04104 481.0703,182.06447 481.17188,182.08008 C 481.28124,182.09572 481.39843,182.10354 481.52344,182.10352 C 481.77343,182.10354 481.98046,182.02151 482.14453,181.85742 C 482.3164,181.68557 482.4453,181.43166 482.53125,181.0957 L 483.82031,181.0957" + id="text6113" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 535.83398,220.83432 L 539.2207,220.83432 L 538.33008,225.93198 C 538.21289,226.55698 538.12304,227.15073 538.06055,227.71323 C 537.99804,228.26792 537.96679,228.72104 537.9668,229.0726 C 537.96679,229.79917 538.13085,230.34214 538.45898,230.70151 C 538.7871,231.05307 539.2871,231.22885 539.95898,231.22885 C 540.74023,231.22885 541.3457,230.90854 541.77539,230.26791 C 542.21288,229.62729 542.57616,228.49058 542.86523,226.85776 L 543.91992,220.83432 L 547.30664,220.83432 L 545.04492,233.6312 L 541.9043,233.6312 L 542.11523,232.2601 C 541.7871,232.86948 541.41991,233.31479 541.01367,233.59604 C 540.61523,233.87729 540.14257,234.01791 539.5957,234.01791 C 539.07226,234.01791 538.60742,233.90073 538.20117,233.66635 C 537.79492,233.43979 537.42773,233.08432 537.09961,232.59995 L 536.04492,238.76401 L 532.69336,238.76401 L 535.83398,220.83432" + id="text6117" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 607.875,197.70117 C 607.74217,199.66211 606.98436,201.22071 605.60156,202.37695 C 604.22655,203.5332 602.42968,204.11133 600.21094,204.11133 C 597.65624,204.11133 595.66796,203.31445 594.24609,201.7207 C 592.83203,200.12696 592.125,197.89258 592.125,195.01758 C 592.125,192.08009 592.84765,189.83009 594.29297,188.26758 C 595.73828,186.7051 597.8164,185.92385 600.52734,185.92383 C 602.73046,185.92385 604.46874,186.46291 605.74219,187.54102 C 607.02342,188.61134 607.72655,190.12697 607.85156,192.08789 L 604.34766,192.08789 C 604.19921,191.11134 603.80077,190.36915 603.15234,189.86133 C 602.50389,189.34572 601.6289,189.08791 600.52734,189.08789 C 598.96484,189.08791 597.77734,189.59181 596.96484,190.59961 C 596.15234,191.60743 595.74609,193.08009 595.74609,195.01758 C 595.74609,196.89258 596.14843,198.3418 596.95313,199.36523 C 597.76562,200.38868 598.91796,200.90039 600.41016,200.90039 C 601.48827,200.90039 602.37108,200.62696 603.05859,200.08008 C 603.74608,199.52539 604.19139,198.73243 604.39453,197.70117 L 607.875,197.70117 M 597.62109,208.76367 L 597.62109,207.25195 C 598.24609,207.41601 598.81249,207.54101 599.32031,207.62695 C 599.82812,207.71289 600.26171,207.75586 600.62109,207.75586 C 601.02733,207.75586 601.32421,207.68554 601.51172,207.54492 C 601.69921,207.41211 601.79296,207.19726 601.79297,206.90039 C 601.79296,206.60351 601.68358,206.39258 601.46484,206.26758 C 601.24608,206.14258 600.8828,206.08008 600.375,206.08008 C 600.1953,206.08008 600.05858,206.08008 599.96484,206.08008 C 599.87108,206.08789 599.78515,206.0957 599.70703,206.10352 L 599.70703,203.63086 L 600.90234,203.63086 L 600.90234,204.68555 L 601.07813,204.68555 C 601.99218,204.68555 602.67968,204.87305 603.14063,205.24805 C 603.60155,205.62304 603.83202,206.18164 603.83203,206.92383 C 603.83202,207.70507 603.57421,208.29101 603.05859,208.68164 C 602.54296,209.07226 601.76952,209.26757 600.73828,209.26758 C 600.33983,209.26757 599.87108,209.2246 599.33203,209.13867 C 598.80077,209.05273 598.23046,208.92773 597.62109,208.76367" + id="text6121" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 721.7168,216.36914 L 721.7168,219.82617 L 718.23633,219.82617 L 718.23633,216.36914 L 721.7168,216.36914 M 721.55273,221.39648 C 721.55273,221.47462 721.55663,221.5879 721.56445,221.73633 C 721.57226,221.88478 721.57616,221.99415 721.57617,222.06445 C 721.57616,222.74415 721.50194,223.31446 721.35352,223.77539 C 721.20507,224.23634 720.96679,224.66602 720.63867,225.06445 C 720.38085,225.36134 720.00195,225.70118 719.50195,226.08398 C 719.00976,226.4668 718.69335,226.74415 718.55273,226.91602 C 718.24804,227.25977 718.0332,227.57618 717.9082,227.86523 C 717.79101,228.1543 717.73242,228.4668 717.73242,228.80273 C 717.73242,229.55274 717.93554,230.13477 718.3418,230.54883 C 718.74804,230.95508 719.32226,231.15821 720.06445,231.1582 C 720.79882,231.15821 721.38085,230.91211 721.81055,230.41992 C 722.24023,229.91993 722.4746,229.22071 722.51367,228.32227 L 725.8418,228.32227 L 725.8418,228.68555 C 725.84178,230.3418 725.31835,231.66211 724.27148,232.64648 C 723.23241,233.62305 721.83007,234.11133 720.06445,234.11133 C 718.25976,234.11133 716.82226,233.64648 715.75195,232.7168 C 714.68945,231.7793 714.1582,230.53321 714.1582,228.97852 C 714.1582,228.40821 714.2168,227.90821 714.33398,227.47852 C 714.45117,227.04883 714.63086,226.65821 714.87305,226.30664 C 715.18554,225.86915 715.67773,225.39259 716.34961,224.87695 C 717.02148,224.36134 717.43554,224.03321 717.5918,223.89258 C 717.88867,223.60353 718.0996,223.29884 718.22461,222.97852 C 718.35742,222.6504 718.42382,222.25587 718.42383,221.79492 C 718.42382,221.75587 718.41992,221.69337 718.41211,221.60742 C 718.40429,221.51368 718.40039,221.44337 718.40039,221.39648 L 721.55273,221.39648" + id="text6131" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Matrix Unicode" + d="" + id="text6955" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="137.05411" + y="23.149496" + id="text4346" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348" + x="137.05411" + y="23.149496" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> Ë </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="186.05411" + y="27.3995" + id="text4346-3" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-1" + x="186.05411" + y="27.3995" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> ¯ </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="482.80411" + y="24.6495" + id="text4346-1" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-7" + x="482.80411" + y="24.6495" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> Ë› </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="558.30408" + y="24.399498" + id="text4346-6" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-0" + x="558.30408" + y="24.399498" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> ˘ </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="626.55408" + y="11.1495" + id="text4346-0" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-09" + x="626.55408" + y="11.1495" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"><tspan + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:12.5px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start" + id="tspan4483"> o</tspan></tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="667.80408" + y="28.899498" + id="text4346-31" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-15" + x="667.80408" + y="28.899498" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> . </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="619.55408" + y="203.14951" + id="text4346-38" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-8" + x="619.55408" + y="203.14951" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> ˇ </tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + x="620.30408" + y="232.14951" + id="text4346-9" + sodipodi:linespacing="125%"><tspan + sodipodi:role="line" + id="tspan4348-6" + x="620.30408" + y="232.14951" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"> Ë™ </tspan></text> + <path + inkscape:connector-curvature="0" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:24px;line-height:125%;font-family:'Swis721 BT';text-align:center;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="m 402.88672,6.52148 2.95312,0 5.63672,6.574219 -2.7539,0 -4.34766,-4.3476565 -4.37109,4.3476565 -2.75391,0 5.63672,-6.574219" + id="text6091-3" /> + </g> +</svg> diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.png b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.png Binary files differnew file mode 100644 index 0000000000..875eb3652f --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.png diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.svg b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.svg new file mode 100644 index 0000000000..1ca6a9c872 --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.svg @@ -0,0 +1,935 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://web.resource.org/cc/" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="900" + height="300" + id="svg2" + sodipodi:version="0.32" + inkscape:version="0.45.1" + version="1.0" + sodipodi:docbase="C:\Documents and Settings\David Nelson\Archives\Svg" + sodipodi:docname="KB_US-International.svg" + inkscape:output_extension="org.inkscape.output.svg.inkscape"> + <defs + id="defs4"> + <marker + inkscape:stockid="Arrow1Lend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Lend" + style="overflow:visible;"> + <path + id="path5387" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;" + transform="scale(0.8) rotate(180)" /> + </marker> + <marker + inkscape:stockid="Arrow1Lstart" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Lstart" + style="overflow:visible"> + <path + id="path5390" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none" + transform="scale(0.8)" /> + </marker> + <marker + inkscape:stockid="Tail" + orient="auto" + refY="0.0" + refX="0.0" + id="Tail" + style="overflow:visible"> + <g + id="g5342" + transform="scale(-1.2)"> + <path + id="path5344" + d="M -3.8048674,-3.9585227 L 0.54352094,-0.00068114835" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5346" + d="M -1.2866832,-3.9585227 L 3.0617053,-0.00068114835" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5348" + d="M 1.3053582,-3.9585227 L 5.6537466,-0.00068114835" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5350" + d="M -3.8048674,4.1775838 L 0.54352094,0.21974226" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5352" + d="M -1.2866832,4.1775838 L 3.0617053,0.21974226" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + <path + id="path5354" + d="M 1.3053582,4.1775838 L 5.6537466,0.21974226" + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" /> + </g> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Mend" + style="overflow:visible;"> + <path + id="path5363" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(0.6) rotate(180) translate(-5,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Lend" + style="overflow:visible;"> + <path + id="path5369" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(1.1) rotate(180) translate(-5,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Send" + style="overflow:visible;"> + <path + id="path5375" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;" + transform="scale(0.2) rotate(180)" /> + </marker> + <marker + inkscape:stockid="Arrow2Send" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Send" + style="overflow:visible;"> + <path + id="path5357" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(0.3) rotate(180) translate(-5,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path5381" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;" + transform="scale(0.4) rotate(180)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lstart" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Lstart" + style="overflow:visible"> + <path + id="path5372" + style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(1.1) translate(-5,0)" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="0.74472808" + inkscape:cx="450" + inkscape:cy="150" + inkscape:document-units="px" + inkscape:current-layer="layer1" + inkscape:grid-points="true" + showgrid="true" + gridtolerance="15px" + gridcolor="#0000ff" + gridopacity="0.12156863" + gridempcolor="#0000ff" + gridempopacity="0.25098039" + gridspacingx="7.5px" + gridspacingy="7.5px" + gridempspacing="4" + showborder="false" + inkscape:window-width="756" + inkscape:window-height="569" + inkscape:window-x="28" + inkscape:window-y="218" + showguides="true" + inkscape:guide-bbox="true" + inkscape:grid-bbox="true" /> + <metadata + id="metadata7"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1"> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,0 L 60,0 L 60,60 L 0,60 L 0,0 z " + id="rect2186" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 60,0 L 120,0 L 120,60 L 60,60 L 60,0 z " + id="rect2218" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 120,0 L 180,0 L 180,60 L 120,60 L 120,0 z " + id="rect2222" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 180,0 L 240,0 L 240,60 L 180,60 L 180,0 z " + id="rect2228" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 240,0 L 300,0 L 300,60 L 240,60 L 240,0 z " + id="rect2230" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 300,0 L 360,0 L 360,60 L 300,60 L 300,0 z " + id="rect2232" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 360,0 L 420,0 L 420,60 L 360,60 L 360,0 z " + id="rect2234" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 420,0 L 480,0 L 480,60 L 420,60 L 420,0 z " + id="rect2236" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 480,0 L 540,0 L 540,60 L 480,60 L 480,0 z " + id="rect2238" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 540,0 L 600,0 L 600,60 L 540,60 L 540,0 z " + id="rect2240" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 600,0 L 660,0 L 660,60 L 600,60 L 600,0 z " + id="rect2242" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 660,0 L 720,0 L 720,60 L 660,60 L 660,0 z " + id="rect2244" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 720,0 L 780,0 L 780,60 L 720,60 L 720,0 z " + id="rect2246" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 780,0 L 900,0 L 900,60 L 780,60 L 780,0 z " + id="rect2248" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,60 L 90,60 L 90,120 L 0,120 L 0,60 z " + id="rect2250" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 90,60 L 150,60 L 150,120 L 90,120 L 90,60 z " + id="rect2252" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 150,60 L 210,60 L 210,120 L 150,120 L 150,60 z " + id="rect2254" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 210,60 L 270,60 L 270,120 L 210,120 L 210,60 z " + id="rect2256" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 270,60 L 330,60 L 330,120 L 270,120 L 270,60 z " + id="rect2258" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 330,60 L 390,60 L 390,120 L 330,120 L 330,60 z " + id="rect2262" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 390,60 L 450,60 L 450,120 L 390,120 L 390,60 z " + id="rect2264" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 450,60 L 510,60 L 510,120 L 450,120 L 450,60 z " + id="rect2266" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 510,60 L 570,60 L 570,120 L 510,120 L 510,60 z " + id="rect2270" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 570,60 L 630,60 L 630,120 L 570,120 L 570,60 z " + id="rect2272" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 630,60 L 690,60 L 690,120 L 630,120 L 630,60 z " + id="rect2274" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 690,60 L 750,60 L 750,120 L 690,120 L 690,60 z " + id="rect2278" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 750,60 L 810,60 L 810,120 L 750,120 L 750,60 z " + id="rect2280" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 810,60 L 900,60 L 900,120 L 810,120 L 810,60 z " + id="rect2284" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,120 L 105,120 L 105,180 L 0,180 L 0,120 z " + id="rect2286" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 105,120 L 165,120 L 165,180 L 105,180 L 105,120 z " + id="rect2292" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 165,120 L 225,120 L 225,180 L 165,180 L 165,120 z " + id="rect2296" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 225,120 L 285,120 L 285,180 L 225,180 L 225,120 z " + id="rect2298" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 285,120 L 345,120 L 345,180 L 285,180 L 285,120 z " + id="rect2300" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 345,120 L 405,120 L 405,180 L 345,180 L 345,120 z " + id="rect2302" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 405,120 L 465,120 L 465,180 L 405,180 L 405,120 z " + id="rect2306" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 465,120 L 525,120 L 525,180 L 465,180 L 465,120 z " + id="rect2308" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 525,120 L 585,120 L 585,180 L 525,180 L 525,120 z " + id="rect2312" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 585,120 L 645,120 L 645,180 L 585,180 L 585,120 z " + id="rect2314" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 645,120 L 705,120 L 705,180 L 645,180 L 645,120 z " + id="rect2316" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 705,120 L 765,120 L 765,180 L 705,180 L 705,120 z " + id="rect2318" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 765,120 L 900,120 L 900,180 L 765,180 L 765,120 z " + id="rect2320" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,180 L 135,180 L 135,240 L 0,240 L 0,180 z " + id="rect2322" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 135,180 L 195,180 L 195,240 L 135,240 L 135,180 z " + id="rect2324" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 195,180 L 255,180 L 255,240 L 195,240 L 195,180 z " + id="rect2326" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 255,180 L 315,180 L 315,240 L 255,240 L 255,180 z " + id="rect2330" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 315,180 L 375,180 L 375,240 L 315,240 L 315,180 z " + id="rect2334" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 375,180 L 435,180 L 435,240 L 375,240 L 375,180 z " + id="rect2336" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 435,180 L 495,180 L 495,240 L 435,240 L 435,180 z " + id="rect2338" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 495,180 L 555,180 L 555,240 L 495,240 L 495,180 z " + id="rect2340" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 555,180 L 615,180 L 615,240 L 555,240 L 555,180 z " + id="rect2342" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 615,180 L 675,180 L 675,240 L 615,240 L 615,180 z " + id="rect2344" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 675,180 L 735,180 L 735,240 L 675,240 L 675,180 z " + id="rect2346" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 735,180 L 900,180 L 900,240 L 735,240 L 735,180 z " + id="rect2348" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 0,240 L 90,240 L 90,300 L 0,300 L 0,240 z " + id="rect2350" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 810,240 L 900,240 L 900,300 L 810,300 L 810,240 z " + id="rect2352" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 150,240 L 240,240 L 240,300 L 150,300 L 150,240 z " + id="rect2354" /> + <path + style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 600,240 L 690,240 L 690,300 L 600,300 L 600,240 z " + id="rect2360" /> + <path + style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 240,240 L 600,240 L 600,300 L 240,300 L 240,240 z " + id="rect2362" /> + <path + style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 90,240 L 150,240 L 150,300 L 90,300 L 90,240 z " + id="rect2364" /> + <path + style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 690,240 L 750,240 L 750,300 L 690,300 L 690,240 z " + id="rect2366" /> + <path + style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" + d="M 750,240 L 810,240 L 810,300 L 750,300 L 750,240 z " + id="rect2368" /> + <path + style="" + d="" + id="flowRoot4146" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 75.351563,18.826172 L 74.4375,11.056641 L 74.4375,6.3691406 L 78.046875,6.3691406 L 78.046875,11.056641 L 77.132813,18.826172 L 75.351563,18.826172 M 74.484375,23.630859 L 74.484375,20.173828 L 77.964844,20.173828 L 77.964844,23.630859 L 74.484375,23.630859 M 75.351563,53.630859 L 75.351563,42.158203 L 71.34375,42.158203 L 71.34375,39.802734 L 71.601563,39.802734 C 73.062496,39.802748 74.124995,39.576186 74.789063,39.123047 C 75.460931,38.669937 75.855462,37.912125 75.972656,36.849609 L 78.65625,36.849609 L 78.65625,53.630859 L 75.351563,53.630859" + id="text5091" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 23.34375,14.220703 L 23.34375,16.810547 C 22.531233,17.365241 21.761702,17.775396 21.035156,18.041016 C 20.316391,18.298833 19.605455,18.42774 18.902344,18.427734 C 18.542956,18.42774 18.183581,18.39649 17.824219,18.333984 C 17.464832,18.27149 17.105457,18.181646 16.746094,18.064453 C 16.558583,18.001959 16.281239,17.904303 15.914063,17.771484 C 14.203116,17.185553 12.902336,16.892585 12.011719,16.892578 C 11.34765,16.892585 10.652339,17.041022 9.9257813,17.337891 C 9.2070275,17.626959 8.3984345,18.091802 7.5,18.732422 L 7.5,16.142578 C 8.3359346,15.580086 9.1328088,15.162118 9.890625,14.888672 C 10.648432,14.607431 11.363275,14.466806 12.035156,14.466797 C 12.949211,14.466806 14.085929,14.693368 15.445313,15.146484 C 15.46874,15.154305 15.484365,15.158212 15.492188,15.158203 C 15.632802,15.205087 15.847646,15.279305 16.136719,15.380859 C 17.347644,15.810555 18.285143,16.025398 18.949219,16.025391 C 19.613267,16.025398 20.29686,15.880867 21,15.591797 C 21.703109,15.302743 22.484358,14.845712 23.34375,14.220703 M 11.988281,35.033203 L 15.011719,35.033203 L 17.320313,39.369141 L 15.65625,39.369141 L 11.988281,35.033203" + id="text5103" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 136.47578,20.443359 C 136.04608,21.099612 135.54999,21.583986 134.9875,21.896484 C 134.42499,22.201173 133.76093,22.353517 132.99532,22.353516 C 131.76093,22.353517 130.81953,22.01758 130.1711,21.345703 C 129.53047,20.673831 129.21015,19.681645 129.21016,18.369141 C 129.21015,16.50196 129.75312,14.935556 130.83907,13.669922 C 131.93281,12.404308 133.27656,11.771496 134.87032,11.771484 C 135.4953,11.771496 136.03827,11.900402 136.49922,12.158203 C 136.96015,12.416027 137.33905,12.798839 137.63594,13.306641 L 138.25703,12.158203 L 140.34297,12.158203 L 138.62032,19.166016 C 138.59686,19.251958 138.57733,19.341801 138.56172,19.435547 C 138.54608,19.521488 138.53827,19.591801 138.53828,19.646484 C 138.53827,19.919926 138.63202,20.126957 138.81953,20.267578 C 139.00702,20.400394 139.28436,20.4668 139.65157,20.466797 C 139.95624,20.4668 140.27264,20.388675 140.60078,20.232422 C 140.9367,20.076175 141.2492,19.857426 141.53828,19.576172 C 142.21014,18.951177 142.71795,18.220709 143.06172,17.384766 C 143.41326,16.548835 143.58904,15.630867 143.58907,14.630859 C 143.58904,12.75587 142.86248,11.216809 141.40938,10.013672 C 139.96405,8.8027492 138.09686,8.1972811 135.80782,8.1972656 C 134.70624,8.1972811 133.6789,8.3300934 132.72578,8.5957031 C 131.78046,8.8613429 130.92109,9.2558737 130.14766,9.7792969 C 128.81953,10.669935 127.79609,11.783215 127.07735,13.119141 C 126.36641,14.455087 126.01094,15.91993 126.01094,17.513672 C 126.01094,19.912113 126.81953,21.83008 128.43672,23.267578 C 130.0539,24.697265 132.21406,25.412108 134.91719,25.412109 C 136.1828,25.412108 137.41718,25.220702 138.62032,24.837891 C 139.83124,24.455077 140.95623,23.90039 141.99532,23.173828 L 142.95625,24.544922 C 141.76092,25.443358 140.49139,26.119138 139.14766,26.572266 C 137.81171,27.025387 136.41718,27.25195 134.96407,27.251953 C 133.46405,27.25195 132.08515,27.060543 130.82735,26.677734 C 129.56953,26.302732 128.45234,25.744139 127.47578,25.001953 C 126.26484,24.05664 125.35859,22.966798 124.75703,21.732422 C 124.15547,20.49805 123.85469,19.099614 123.85469,17.537109 C 123.85469,16.232429 124.05781,14.990243 124.46407,13.810547 C 124.87813,12.623058 125.48359,11.544934 126.28047,10.576172 C 127.43672,9.1621238 128.82734,8.0918124 130.45235,7.3652344 C 132.07734,6.6386889 133.88593,6.275408 135.87813,6.2753906 C 137.19843,6.275408 138.43671,6.4550953 139.59297,6.8144531 C 140.75702,7.1660321 141.76873,7.6660316 142.62813,8.3144531 C 143.68279,9.1347801 144.46795,10.072279 144.9836,11.126953 C 145.50701,12.17384 145.76873,13.357432 145.76875,14.677734 C 145.76873,15.966805 145.51092,17.15821 144.99532,18.251953 C 144.48748,19.337895 143.75311,20.267581 142.79219,21.041016 C 142.2453,21.478518 141.64764,21.814455 140.99922,22.048828 C 140.35858,22.275392 139.69061,22.388673 138.99532,22.388672 C 138.16718,22.388673 137.54218,22.224611 137.12032,21.896484 C 136.70624,21.568361 136.4914,21.083987 136.47578,20.443359 M 137.06172,15.427734 C 136.96015,14.794931 136.73358,14.314462 136.38203,13.986328 C 136.03827,13.650401 135.58124,13.482432 135.01094,13.482422 C 134.1203,13.482432 133.34687,13.966807 132.69063,14.935547 C 132.03437,15.904305 131.70624,17.068366 131.70625,18.427734 C 131.70624,19.146489 131.86249,19.693363 132.175,20.068359 C 132.49531,20.443363 132.95624,20.630862 133.55782,20.630859 C 134.20624,20.630862 134.79608,20.384769 135.32735,19.892578 C 135.8664,19.400395 136.23358,18.75977 136.42891,17.970703 L 137.06172,15.427734 M 128.56563,53.630859 C 128.58125,52.130861 128.90156,50.861331 129.52657,49.822266 C 130.15156,48.775395 131.26094,47.716803 132.85469,46.646484 C 133.09687,46.482429 133.44844,46.255867 133.90938,45.966797 C 136.01875,44.615243 137.07343,43.314463 137.07344,42.064453 C 137.07343,41.322278 136.85078,40.736341 136.40547,40.306641 C 135.96015,39.876967 135.35078,39.662123 134.57735,39.662109 C 133.73359,39.662123 133.08125,39.927748 132.62032,40.458984 C 132.16719,40.982435 131.94062,41.732434 131.94063,42.708984 L 131.94063,42.849609 L 128.84688,42.849609 C 128.84688,40.927747 129.3625,39.44728 130.39375,38.408203 C 131.425,37.369157 132.89375,36.849626 134.8,36.849609 C 136.52656,36.849626 137.90546,37.322282 138.93672,38.267578 C 139.96796,39.205093 140.48358,40.455091 140.4836,42.017578 C 140.48358,43.134776 140.21405,44.103525 139.675,44.923828 C 139.13593,45.744149 138.09296,46.677741 136.5461,47.724609 C 136.21796,47.951178 135.76484,48.248052 135.18672,48.615234 C 133.71797,49.560551 132.88984,50.2793 132.70235,50.771484 L 140.31953,50.771484 L 140.31953,53.630859 L 128.56563,53.630859" + id="text5127" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 195.28125,13.693359 L 194.25,16.552734 L 197.19141,16.552734 L 198.19922,13.693359 L 195.28125,13.693359 M 195.28125,6.4746094 L 197.87109,6.4746094 L 196.16016,11.337891 L 198.99609,11.337891 L 200.73047,6.4746094 L 203.32031,6.4746094 L 201.58594,11.337891 L 204.90234,11.337891 L 204.03516,13.693359 L 200.75391,13.693359 L 199.76953,16.529297 L 203.16797,16.529297 L 202.33594,18.873047 L 198.92578,18.873047 L 197.19141,23.748047 L 194.60156,23.748047 L 196.33594,18.873047 L 193.47656,18.873047 L 191.73047,23.748047 L 189.15234,23.748047 L 190.86328,18.873047 L 187.5,18.873047 L 188.39063,16.529297 L 191.69531,16.529297 L 192.70313,13.693359 L 189.19922,13.693359 L 190.06641,11.337891 L 193.54688,11.337891 L 195.28125,6.4746094 M 190.07813,48.521484 L 193.30078,48.521484 C 193.30859,49.458989 193.53515,50.166019 193.98047,50.642578 C 194.42578,51.111331 195.08593,51.345705 195.96094,51.345703 C 196.80468,51.345705 197.45312,51.126956 197.90625,50.689453 C 198.36718,50.244144 198.59765,49.607426 198.59766,48.779297 C 198.59765,47.951178 198.32812,47.326178 197.78906,46.904297 C 197.2578,46.474617 196.46484,46.259773 195.41016,46.259766 C 195.35546,46.259773 195.26953,46.263679 195.15234,46.271484 C 195.04296,46.279304 194.96093,46.28321 194.90625,46.283203 L 194.90625,43.962891 L 195.26953,43.962891 C 196.23827,43.9629 196.95312,43.7754 197.41406,43.400391 C 197.8828,43.017589 198.11718,42.435558 198.11719,41.654297 C 198.11718,41.005872 197.91796,40.494154 197.51953,40.119141 C 197.1289,39.736342 196.59374,39.544936 195.91406,39.544922 C 195.17187,39.544936 194.59765,39.763686 194.19141,40.201172 C 193.78515,40.638685 193.58203,41.259778 193.58203,42.064453 L 193.58203,42.205078 L 190.41797,42.205078 C 190.45703,40.486341 190.96094,39.169936 191.92969,38.255859 C 192.90625,37.334001 194.28125,36.873064 196.05469,36.873047 C 197.73437,36.873064 199.0664,37.283219 200.05078,38.103516 C 201.03514,38.923843 201.52733,40.02931 201.52734,41.419922 C 201.52733,42.154308 201.35936,42.798839 201.02344,43.353516 C 200.68749,43.908213 200.18358,44.365244 199.51172,44.724609 C 200.37108,45.099618 201.01952,45.619149 201.45703,46.283203 C 201.90233,46.93946 202.12499,47.724615 202.125,48.638672 C 202.12499,50.318363 201.57421,51.650393 200.47266,52.634766 C 199.37108,53.619141 197.86718,54.111328 195.96094,54.111328 C 194.07812,54.111328 192.625,53.634766 191.60156,52.681641 C 190.58594,51.720705 190.07812,50.357425 190.07813,48.591797 L 190.07813,48.521484" + id="text5139" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 254.46094,21.451172 C 255.10155,21.365237 255.58984,21.134768 255.92578,20.759766 C 256.26171,20.384769 256.42968,19.884769 256.42969,19.259766 C 256.42968,18.705083 256.26952,18.248052 255.94922,17.888672 C 255.63671,17.52149 255.14062,17.236335 254.46094,17.033203 L 254.46094,21.451172 M 253.06641,13.435547 L 253.06641,9.4511719 C 252.45703,9.529311 251.99218,9.7402483 251.67188,10.083984 C 251.35156,10.419935 251.1914,10.87306 251.19141,11.443359 C 251.1914,11.919934 251.33984,12.318371 251.63672,12.638672 C 251.9414,12.958995 252.41796,13.22462 253.06641,13.435547 M 253.06641,26.267578 L 253.06641,24.017578 C 251.30078,23.908203 249.98047,23.396485 249.10547,22.482422 C 248.23047,21.568361 247.79297,20.24805 247.79297,18.521484 L 250.93359,18.521484 C 250.97265,19.365239 251.16796,20.033207 251.51953,20.525391 C 251.8789,21.009768 252.39453,21.318362 253.06641,21.451172 L 253.06641,16.599609 C 251.2539,16.138679 249.96484,15.537117 249.19922,14.794922 C 248.43359,14.052744 248.05078,13.03712 248.05078,11.748047 C 248.05078,10.318373 248.5039,9.1660301 249.41016,8.2910156 C 250.32422,7.4160318 251.54296,6.959001 253.06641,6.9199219 L 253.06641,5.4199219 L 254.46094,5.4199219 L 254.46094,6.9199219 C 255.98437,6.9980635 257.17186,7.4590005 258.02344,8.3027344 C 258.87499,9.1386864 259.34374,10.318373 259.42969,11.841797 L 256.24219,11.841797 C 256.18749,11.115247 256.01171,10.56056 255.71484,10.177734 C 255.42577,9.7871232 255.0078,9.5683734 254.46094,9.5214844 L 254.46094,13.787109 C 256.39062,14.388681 257.74999,15.07618 258.53906,15.849609 C 259.32811,16.623054 259.72264,17.642584 259.72266,18.908203 C 259.72264,20.400394 259.26171,21.591799 258.33984,22.482422 C 257.42577,23.373047 256.1328,23.892578 254.46094,24.041016 L 254.46094,26.267578 L 253.06641,26.267578 M 254.64844,47.419922 L 254.64844,40.236328 L 250.08984,47.419922 L 254.64844,47.419922 M 254.57813,53.630859 L 254.57813,50.009766 L 247.5,50.009766 L 247.5,47.056641 L 253.6875,37.330078 L 257.84766,37.330078 L 257.84766,47.337891 L 259.79297,47.337891 L 259.79297,50.009766 L 257.84766,50.009766 L 257.84766,53.630859 L 254.57813,53.630859" + id="text5145" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 320.42578,19.740234 C 320.42577,20.263675 320.60155,20.705081 320.95313,21.064453 C 321.30467,21.416018 321.73827,21.591799 322.25391,21.591797 C 322.75389,21.591799 323.18358,21.412112 323.54297,21.052734 C 323.90233,20.68555 324.08201,20.24805 324.08203,19.740234 C 324.08201,19.240239 323.90233,18.814458 323.54297,18.462891 C 323.19139,18.103521 322.7617,17.923834 322.25391,17.923828 C 321.73827,17.923834 321.30467,18.099615 320.95313,18.451172 C 320.60155,18.794927 320.42577,19.224614 320.42578,19.740234 M 317.88281,19.740234 C 317.8828,18.521489 318.30468,17.494147 319.14844,16.658203 C 319.99217,15.822273 321.02733,15.404305 322.25391,15.404297 C 323.45701,15.404305 324.48045,15.830086 325.32422,16.681641 C 326.17576,17.525397 326.60154,18.544927 326.60156,19.740234 C 326.60154,20.943362 326.17576,21.974611 325.32422,22.833984 C 324.47264,23.685547 323.4492,24.111328 322.25391,24.111328 C 321.02733,24.111328 319.99217,23.689453 319.14844,22.845703 C 318.30468,22.001955 317.8828,20.9668 317.88281,19.740234 M 311.07422,24.111328 L 321.08203,6.8496094 L 322.96875,6.8496094 L 312.96094,24.111328 L 311.07422,24.111328 M 310.04297,11.220703 C 310.04297,11.73634 310.21484,12.169933 310.55859,12.521484 C 310.91015,12.873058 311.34375,13.048839 311.85938,13.048828 C 312.36718,13.048839 312.79687,12.873058 313.14844,12.521484 C 313.50781,12.162121 313.68749,11.728528 313.6875,11.220703 C 313.68749,10.720716 313.50781,10.294935 313.14844,9.9433594 C 312.79687,9.5839984 312.36718,9.4043111 311.85938,9.4042969 C 311.34375,9.4043111 310.91015,9.5800922 310.55859,9.9316406 C 310.21484,10.275404 310.04297,10.705091 310.04297,11.220703 M 307.5,11.220703 C 307.5,10.001967 307.92187,8.9707178 308.76563,8.1269531 C 309.60937,7.275407 310.64062,6.8496262 311.85938,6.8496094 C 313.06249,6.8496262 314.08593,7.2793132 314.92969,8.1386719 C 315.78124,8.990249 316.20702,10.017592 316.20703,11.220703 C 316.20702,12.423839 315.78124,13.451182 314.92969,14.302734 C 314.08593,15.146493 313.06249,15.568367 311.85938,15.568359 C 310.63281,15.568367 309.59765,15.150399 308.75391,14.314453 C 307.91797,13.478526 307.5,12.447277 307.5,11.220703 M 310.85156,49.119141 L 314.13281,49.119141 C 314.1875,49.853519 314.43359,50.423831 314.87109,50.830078 C 315.30859,51.228518 315.89453,51.427737 316.62891,51.427734 C 317.53515,51.427737 318.22655,51.162112 318.70313,50.630859 C 319.18749,50.099613 319.42968,49.337895 319.42969,48.345703 C 319.42968,47.416022 319.18358,46.685554 318.69141,46.154297 C 318.19921,45.615242 317.51952,45.345711 316.65234,45.345703 C 316.16796,45.345711 315.74218,45.443368 315.375,45.638672 C 315.00781,45.833992 314.69531,46.123054 314.4375,46.505859 L 311.41406,46.330078 L 312.50391,37.330078 L 322.14844,37.330078 L 322.14844,40.166016 L 314.87109,40.166016 L 314.4375,43.529297 C 314.80468,43.240245 315.22656,43.025401 315.70313,42.884766 C 316.17968,42.736339 316.71093,42.66212 317.29688,42.662109 C 318.96874,42.66212 320.3164,43.169932 321.33984,44.185547 C 322.37108,45.20118 322.88671,46.53321 322.88672,48.181641 C 322.88671,49.986332 322.3203,51.427737 321.1875,52.505859 C 320.05468,53.576172 318.53515,54.111328 316.62891,54.111328 C 314.89453,54.111328 313.51172,53.669922 312.48047,52.787109 C 311.45703,51.896486 310.91406,50.673831 310.85156,49.119141" + id="text5151" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 372.15234,48.298828 C 372.15234,49.25977 372.39062,50.021488 372.86719,50.583984 C 373.35156,51.146487 374.00781,51.427737 374.83594,51.427734 C 375.60937,51.427737 376.21484,51.154299 376.65234,50.607422 C 377.08983,50.06055 377.30858,49.298832 377.30859,48.322266 C 377.30858,47.423834 377.08202,46.724616 376.62891,46.224609 C 376.17577,45.724617 375.53905,45.474618 374.71875,45.474609 C 373.91406,45.474618 373.28515,45.724617 372.83203,46.224609 C 372.3789,46.724616 372.15234,47.416022 372.15234,48.298828 M 372.10547,43.916016 C 372.48828,43.525401 372.94921,43.232432 373.48828,43.037109 C 374.02734,42.833995 374.6289,42.732433 375.29297,42.732422 C 376.93358,42.732433 378.24608,43.232432 379.23047,44.232422 C 380.22264,45.23243 380.71874,46.56446 380.71875,48.228516 C 380.71874,49.994144 380.17968,51.419924 379.10156,52.505859 C 378.02343,53.591797 376.60155,54.134765 374.83594,54.134766 C 372.79687,54.134765 371.24609,53.431641 370.18359,52.025391 C 369.1289,50.619144 368.60156,48.560552 368.60156,45.849609 C 368.60156,42.935558 369.16797,40.708997 370.30078,39.169922 C 371.43359,37.623063 373.0664,36.849626 375.19922,36.849609 C 376.68358,36.849626 377.8789,37.236345 378.78516,38.009766 C 379.69921,38.783218 380.19921,39.830092 380.28516,41.150391 L 376.88672,41.150391 C 376.80858,40.611341 376.59765,40.205092 376.25391,39.931641 C 375.91015,39.658217 375.42968,39.521498 374.8125,39.521484 C 373.96874,39.521498 373.32031,39.888686 372.86719,40.623047 C 372.41406,41.349622 372.16015,42.447277 372.10547,43.916016" + id="text5157" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 432.85547,16.095703 L 431.96484,16.740234 C 431.60546,16.990241 431.33593,17.291022 431.15625,17.642578 C 430.97656,17.994146 430.88671,18.388677 430.88672,18.826172 C 430.88671,19.490239 431.11328,20.048832 431.56641,20.501953 C 432.01953,20.955081 432.58593,21.181643 433.26563,21.181641 C 433.76562,21.181643 434.24218,21.080081 434.69531,20.876953 C 435.15624,20.666019 435.58202,20.361331 435.97266,19.962891 L 432.85547,16.095703 M 433.79297,12.404297 L 434.20313,12.111328 C 434.57812,11.853527 434.85546,11.564465 435.03516,11.244141 C 435.21483,10.923841 435.30468,10.556654 435.30469,10.142578 C 435.30468,9.7441545 435.17968,9.4277486 434.92969,9.1933594 C 434.68749,8.958999 434.35546,8.8418117 433.93359,8.8417969 C 433.5039,8.8418117 433.16406,8.9629053 432.91406,9.2050781 C 432.66406,9.4394673 432.53906,9.7597795 432.53906,10.166016 C 432.53906,10.384779 432.59765,10.62306 432.71484,10.880859 C 432.83984,11.138684 433.01562,11.412122 433.24219,11.701172 L 433.79297,12.404297 M 431.15625,13.962891 L 430.47656,13.072266 C 430.125,12.603527 429.87109,12.166027 429.71484,11.759766 C 429.5664,11.345715 429.49218,10.912122 429.49219,10.458984 C 429.49218,9.2089988 429.89062,8.2168123 430.6875,7.4824219 C 431.49218,6.7402513 432.58203,6.3691579 433.95703,6.3691406 C 435.27733,6.3691579 436.3203,6.7090013 437.08594,7.3886719 C 437.85155,8.0683749 438.23436,8.9863428 438.23438,10.142578 C 438.23436,11.017591 438.0078,11.802746 437.55469,12.498047 C 437.10936,13.185557 436.40624,13.833994 435.44531,14.443359 L 437.91797,17.490234 C 438.15233,17.107428 438.33593,16.677741 438.46875,16.201172 C 438.60936,15.724617 438.70702,15.193368 438.76172,14.607422 L 441.80859,14.607422 C 441.72264,15.623055 441.5117,16.56446 441.17578,17.431641 C 440.83983,18.298833 440.37889,19.091801 439.79297,19.810547 L 442.93359,23.630859 L 438.94922,23.630859 L 437.77734,22.189453 C 437.08983,22.822266 436.33202,23.302735 435.50391,23.630859 C 434.68359,23.951172 433.82421,24.111328 432.92578,24.111328 C 431.33203,24.111328 430.02734,23.638672 429.01172,22.693359 C 428.0039,21.748049 427.5,20.541019 427.5,19.072266 C 427.5,17.978521 427.78125,17.037116 428.34375,16.248047 C 428.90625,15.458993 429.84375,14.697275 431.15625,13.962891 M 434.66016,53.630859 L 431.15625,53.630859 C 431.28125,51.341799 431.83203,49.07227 432.80859,46.822266 C 433.79296,44.572275 435.19531,42.361339 437.01563,40.189453 L 428.76563,40.189453 L 428.76563,37.330078 L 440.66016,37.330078 L 440.66016,39.849609 C 438.8164,41.880871 437.39843,44.029306 436.40625,46.294922 C 435.42187,48.560552 434.83984,51.005862 434.66016,53.630859" + id="text5163" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 493.5,13.212891 L 491.4375,16.119141 L 489.44531,14.724609 L 491.69531,11.900391 L 488.41406,10.986328 L 489.17578,8.6074219 L 492.32813,9.7324219 L 492.32813,6.3691406 L 494.64844,6.3691406 L 494.64844,9.7324219 L 497.80078,8.6308594 L 498.58594,11.009766 L 495.30469,11.900391 L 497.53125,14.701172 L 495.49219,16.166016 L 493.5,13.212891 M 490.875,48.755859 C 490.875,49.576176 491.10156,50.208988 491.55469,50.654297 C 492.01562,51.099612 492.67187,51.322268 493.52344,51.322266 C 494.33593,51.322268 494.97265,51.095706 495.43359,50.642578 C 495.90233,50.189457 496.13671,49.560551 496.13672,48.755859 C 496.13671,47.982428 495.89843,47.361334 495.42188,46.892578 C 494.9453,46.423835 494.31249,46.189461 493.52344,46.189453 C 492.73437,46.189461 492.09374,46.427742 491.60156,46.904297 C 491.11718,47.380866 490.875,47.998053 490.875,48.755859 M 491.14453,41.560547 C 491.14453,42.208996 491.34765,42.708995 491.75391,43.060547 C 492.16015,43.404307 492.74218,43.576182 493.5,43.576172 C 494.2578,43.576182 494.83984,43.400401 495.24609,43.048828 C 495.66015,42.697277 495.86718,42.201183 495.86719,41.560547 C 495.86718,40.93556 495.65624,40.443373 495.23438,40.083984 C 494.81249,39.724623 494.23437,39.544936 493.5,39.544922 C 492.78124,39.544936 492.20703,39.72853 491.77734,40.095703 C 491.35546,40.462904 491.14453,40.951185 491.14453,41.560547 M 489.9375,44.818359 C 489.23437,44.427744 488.72656,43.970713 488.41406,43.447266 C 488.10156,42.923839 487.94531,42.255871 487.94531,41.443359 C 487.94531,40.005873 488.4375,38.876968 489.42188,38.056641 C 490.40625,37.236345 491.76562,36.826189 493.5,36.826172 C 495.24999,36.826189 496.61718,37.236345 497.60156,38.056641 C 498.59374,38.869155 499.08983,39.998061 499.08984,41.443359 C 499.08983,42.216808 498.92186,42.888683 498.58594,43.458984 C 498.24999,44.021494 497.74608,44.474619 497.07422,44.818359 C 497.89452,45.20118 498.51171,45.73243 498.92578,46.412109 C 499.33983,47.083991 499.54686,47.904303 499.54688,48.873047 C 499.54686,50.505862 499.0078,51.787111 497.92969,52.716797 C 496.85936,53.646484 495.3828,54.111328 493.5,54.111328 C 491.59375,54.111328 490.11328,53.650391 489.05859,52.728516 C 488.0039,51.806642 487.47656,50.521487 487.47656,48.873047 C 487.47656,47.912115 487.67187,47.107428 488.0625,46.458984 C 488.46094,45.802742 489.08594,45.255868 489.9375,44.818359" + id="text5169" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 557.85938,6.3691406 C 556.78124,8.1347811 555.98046,9.9316543 555.45703,11.759766 C 554.93359,13.587901 554.67187,15.505868 554.67188,17.513672 C 554.67187,19.513676 554.93359,21.427737 555.45703,23.255859 C 555.98046,25.083983 556.78124,26.880856 557.85938,28.646484 L 555.38672,28.646484 C 554.01953,26.779294 552.98046,24.904296 552.26953,23.021484 C 551.5664,21.130862 551.21484,19.294926 551.21484,17.513672 C 551.21484,15.73243 551.5664,13.896494 552.26953,12.005859 C 552.98046,10.115248 554.01953,8.2363435 555.38672,6.3691406 L 557.85938,6.3691406 M 556.06641,42.685547 C 556.0664,41.724621 555.82421,40.96681 555.33984,40.412109 C 554.86327,39.849623 554.21093,39.568373 553.38281,39.568359 C 552.60156,39.568373 551.99218,39.837904 551.55469,40.376953 C 551.125,40.916028 550.91015,41.669934 550.91016,42.638672 C 550.91015,43.544932 551.13671,44.251963 551.58984,44.759766 C 552.04296,45.267586 552.67968,45.521492 553.5,45.521484 C 554.30468,45.521492 554.93359,45.271493 555.38672,44.771484 C 555.83983,44.271494 556.0664,43.576182 556.06641,42.685547 M 556.125,47.056641 C 555.73437,47.447272 555.27343,47.74024 554.74219,47.935547 C 554.21093,48.130865 553.61327,48.228521 552.94922,48.228516 C 551.30078,48.228521 549.98047,47.732428 548.98828,46.740234 C 547.99609,45.748055 547.5,44.419931 547.5,42.755859 C 547.5,40.990247 548.03906,39.564467 549.11719,38.478516 C 550.19531,37.392594 551.61718,36.849626 553.38281,36.849609 C 555.42968,36.849626 556.98436,37.556657 558.04688,38.970703 C 559.11718,40.376966 559.65233,42.431652 559.65234,45.134766 C 559.65233,48.041021 559.08202,50.267581 557.94141,51.814453 C 556.80077,53.361328 555.16015,54.134765 553.01953,54.134766 C 551.54296,54.134765 550.35156,53.751953 549.44531,52.986328 C 548.53906,52.212892 548.04297,51.162112 547.95703,49.833984 L 551.34375,49.845703 C 551.42187,50.384769 551.63281,50.787112 551.97656,51.052734 C 552.32031,51.318362 552.80468,51.451174 553.42969,51.451172 C 554.27343,51.451174 554.91796,51.083987 555.36328,50.349609 C 555.80858,49.615238 556.06249,48.517583 556.125,47.056641" + id="text5175" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 609.375,6.3691406 L 611.87109,6.3691406 C 613.23046,8.228531 614.26171,10.103529 614.96484,11.994141 C 615.66796,13.876963 616.01952,15.716805 616.01953,17.513672 C 616.01952,19.302739 615.66796,21.142581 614.96484,23.033203 C 614.26171,24.923827 613.23046,26.794919 611.87109,28.646484 L 609.375,28.646484 C 610.46094,26.873044 611.26562,25.072264 611.78906,23.244141 C 612.32031,21.408205 612.58593,19.498051 612.58594,17.513672 C 612.58593,15.521492 612.32031,13.611338 611.78906,11.783203 C 611.26562,9.9550918 610.46094,8.1504061 609.375,6.3691406 M 610.98047,45.474609 C 610.98046,47.513678 611.18359,48.994145 611.58984,49.916016 C 612.0039,50.837893 612.66015,51.29883 613.55859,51.298828 C 614.45702,51.29883 615.11327,50.833987 615.52734,49.904297 C 615.9414,48.974614 616.14843,47.498053 616.14844,45.474609 C 616.14843,43.44337 615.9414,41.966809 615.52734,41.044922 C 615.11327,40.12306 614.45702,39.662123 613.55859,39.662109 C 612.66015,39.662123 612.0039,40.12306 611.58984,41.044922 C 611.18359,41.958996 610.98046,43.435557 610.98047,45.474609 M 607.5,45.474609 C 607.5,42.591808 608,40.43556 609,39.005859 C 610.00781,37.568375 611.52734,36.849626 613.55859,36.849609 C 615.58202,36.849626 617.09765,37.572282 618.10547,39.017578 C 619.12108,40.455091 619.62889,42.615245 619.62891,45.498047 C 619.62889,48.380865 619.12499,50.533206 618.11719,51.955078 C 617.11718,53.376953 615.59765,54.08789 613.55859,54.087891 C 611.52734,54.08789 610.00781,53.373047 609,51.943359 C 608,50.513675 607.5,48.357427 607.5,45.474609" + id="text5181" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 667.5,26.900391 L 679.5,26.900391 L 679.5,29.291016 L 667.5,29.291016 L 667.5,26.900391 M 670.20703,48.849609 L 670.20703,45.638672 L 676.79297,45.638672 L 676.79297,48.849609 L 670.20703,48.849609" + id="text5187" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 733.33594,9.3222656 L 735.70313,9.3222656 L 735.70313,15.298828 L 741.53906,15.298828 L 741.53906,17.630859 L 735.70313,17.630859 L 735.70313,23.630859 L 733.33594,23.630859 L 733.33594,17.630859 L 727.5,17.630859 L 727.5,15.298828 L 733.33594,15.298828 L 733.33594,9.3222656 M 727.5,47.818359 L 741.53906,47.818359 L 741.53906,50.150391 L 727.5,50.150391 L 727.5,47.818359 M 727.5,42.779297 L 741.53906,42.779297 L 741.53906,45.111328 L 727.5,45.111328 L 727.5,42.779297" + id="text5201" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 11.070313,95.601563 L 11.070313,86.148438 L 7.65625,86.148438 L 7.65625,84.09375 L 16.828125,84.09375 L 16.828125,86.148438 L 13.4375,86.148438 L 13.4375,95.601563 L 11.070313,95.601563 M 22.859375,94.546875 C 22.572911,94.989584 22.197911,95.328125 21.734375,95.5625 C 21.270829,95.791666 20.731767,95.90625 20.117188,95.90625 C 19.294269,95.90625 18.658853,95.671875 18.210938,95.203125 C 17.768228,94.734376 17.546874,94.06771 17.546875,93.203125 C 17.546874,92.401045 17.768228,91.789066 18.210938,91.367188 C 18.658853,90.945317 19.395831,90.656255 20.421875,90.5 C 20.656246,90.463547 20.963538,90.42188 21.34375,90.375 C 22.307286,90.250005 22.789057,89.97136 22.789063,89.539063 C 22.789057,89.195319 22.682286,88.950527 22.46875,88.804688 C 22.255203,88.653653 21.898433,88.578132 21.398438,88.578125 C 20.9401,88.578132 20.588538,88.669278 20.34375,88.851563 C 20.098955,89.033861 19.97656,89.294277 19.976563,89.632813 L 19.976563,89.757813 L 17.851563,89.757813 L 17.851563,89.601563 C 17.851562,88.731778 18.158853,88.049487 18.773438,87.554688 C 19.388018,87.054696 20.236976,86.804696 21.320313,86.804688 C 22.507807,86.804696 23.41666,87.010425 24.046875,87.421875 C 24.682284,87.833341 24.999992,88.427091 25,89.203125 L 25,94.03125 C 24.999992,94.385418 25.03645,94.651043 25.109375,94.828125 C 25.182283,95.000001 25.304679,95.130209 25.476563,95.21875 L 25.476563,95.601563 L 23.109375,95.601563 C 23.031244,95.455729 22.971348,95.294271 22.929688,95.117188 C 22.888015,94.940105 22.864577,94.750001 22.859375,94.546875 M 22.820313,91.421875 C 22.450515,91.593754 22.023432,91.731775 21.539063,91.835938 C 21.059892,91.940108 20.812496,91.994795 20.796875,92 C 20.39583,92.114587 20.11458,92.257816 19.953125,92.429688 C 19.796872,92.601566 19.718747,92.838544 19.71875,93.140625 C 19.718747,93.453127 19.82031,93.703127 20.023438,93.890625 C 20.226559,94.072918 20.499997,94.164064 20.84375,94.164063 C 21.458329,94.164064 21.940099,93.992189 22.289063,93.648438 C 22.643224,93.299481 22.820307,92.825524 22.820313,92.226563 L 22.820313,91.421875 M 27.039063,84.09375 L 29.25,84.09375 L 29.25,88.164063 C 29.531246,87.721362 29.882809,87.388029 30.304688,87.164063 C 30.731766,86.934905 31.216141,86.820321 31.757813,86.820313 C 32.783847,86.820321 33.622388,87.2448 34.273438,88.09375 C 34.92447,88.937507 35.249991,90.036464 35.25,91.390625 C 35.249991,92.734378 34.92447,93.820314 34.273438,94.648438 C 33.622388,95.476563 32.773431,95.890625 31.726563,95.890625 C 31.179682,95.890625 30.70312,95.776041 30.296875,95.546875 C 29.895829,95.317709 29.531246,94.953126 29.203125,94.453125 L 29.203125,95.601563 L 27.039063,95.601563 L 27.039063,84.09375 M 32.992188,91.296875 C 32.992181,90.51563 32.828118,89.903652 32.5,89.460938 C 32.171869,89.013027 31.721348,88.789069 31.148438,88.789063 C 30.544266,88.789069 30.075517,89.007819 29.742188,89.445313 C 29.414059,89.87761 29.249997,90.494797 29.25,91.296875 C 29.249997,92.161462 29.406247,92.817711 29.71875,93.265625 C 30.036454,93.713544 30.497391,93.937502 31.101563,93.9375 C 31.71614,93.937502 32.18489,93.713544 32.507813,93.265625 C 32.830722,92.812503 32.992181,92.156253 32.992188,91.296875" + id="text5427" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 789.76563,44.369141 L 792.57031,44.369141 C 793.23176,44.369143 793.71353,44.249351 794.01563,44.009766 C 794.3177,43.770185 794.46874,43.392581 794.46875,42.876953 C 794.46874,42.340499 794.3203,41.955083 794.02344,41.720703 C 793.72656,41.481125 793.23697,41.361333 792.55469,41.361328 L 789.76563,41.361328 L 789.76563,44.369141 M 789.76563,39.392578 L 792.46875,39.392578 C 793.05208,39.392585 793.47916,39.293627 793.75,39.095703 C 794.02083,38.892586 794.15624,38.574878 794.15625,38.142578 C 794.15624,37.720712 794.02343,37.416025 793.75781,37.228516 C 793.49739,37.035817 793.06249,36.939463 792.45313,36.939453 L 789.76563,36.939453 L 789.76563,39.392578 M 787.5,46.447266 L 787.5,34.939453 L 792.92188,34.939453 C 794.09895,34.939465 794.99478,35.189464 795.60938,35.689453 C 796.22916,36.184255 796.53905,36.905609 796.53906,37.853516 C 796.53905,38.436857 796.42447,38.923836 796.19531,39.314453 C 795.96614,39.705085 795.62239,40.007168 795.16406,40.220703 C 795.7578,40.460292 796.20051,40.806646 796.49219,41.259766 C 796.78905,41.707687 796.93749,42.267582 796.9375,42.939453 C 796.93749,44.059247 796.57291,44.92383 795.84375,45.533203 C 795.11457,46.142578 794.08072,46.447266 792.74219,46.447266 L 787.5,46.447266 M 803.45313,45.392578 C 803.16666,45.835287 802.79166,46.173828 802.32813,46.408203 C 801.86458,46.63737 801.32552,46.751953 800.71094,46.751953 C 799.88802,46.751953 799.2526,46.517578 798.80469,46.048828 C 798.36198,45.580079 798.14062,44.913413 798.14063,44.048828 C 798.14062,43.246748 798.36198,42.634769 798.80469,42.212891 C 799.2526,41.79102 799.98958,41.501958 801.01563,41.345703 C 801.25,41.30925 801.55729,41.267583 801.9375,41.220703 C 802.90104,41.095708 803.38281,40.817063 803.38281,40.384766 C 803.38281,40.041022 803.27604,39.796231 803.0625,39.650391 C 802.84895,39.499356 802.49218,39.423835 801.99219,39.423828 C 801.53385,39.423835 801.18229,39.514981 800.9375,39.697266 C 800.69271,39.879564 800.57031,40.13998 800.57031,40.478516 L 800.57031,40.603516 L 798.44531,40.603516 L 798.44531,40.447266 C 798.44531,39.577481 798.7526,38.89519 799.36719,38.400391 C 799.98177,37.900399 800.83073,37.650399 801.91406,37.650391 C 803.10156,37.650399 804.01041,37.856128 804.64063,38.267578 C 805.27603,38.679044 805.59374,39.272794 805.59375,40.048828 L 805.59375,44.876953 C 805.59374,45.231121 805.6302,45.496746 805.70313,45.673828 C 805.77603,45.845704 805.89843,45.975912 806.07031,46.064453 L 806.07031,46.447266 L 803.70313,46.447266 C 803.62499,46.301432 803.5651,46.139974 803.52344,45.962891 C 803.48176,45.785808 803.45833,45.595704 803.45313,45.392578 M 803.41406,42.267578 C 803.04427,42.439457 802.61718,42.577478 802.13281,42.681641 C 801.65364,42.785811 801.40625,42.840498 801.39063,42.845703 C 800.98958,42.96029 800.70833,43.103519 800.54688,43.275391 C 800.39062,43.447269 800.3125,43.684248 800.3125,43.986328 C 800.3125,44.29883 800.41406,44.54883 800.61719,44.736328 C 800.82031,44.918621 801.09375,45.009767 801.4375,45.009766 C 802.05208,45.009767 802.53385,44.837892 802.88281,44.494141 C 803.23697,44.145185 803.41406,43.671227 803.41406,43.072266 L 803.41406,42.267578 M 812.71875,43.244141 L 814.96094,43.244141 C 814.86718,44.322268 814.47395,45.173829 813.78125,45.798828 C 813.08854,46.423828 812.19791,46.736328 811.10938,46.736328 C 809.875,46.736328 808.90625,46.335287 808.20313,45.533203 C 807.50521,44.725913 807.15625,43.611331 807.15625,42.189453 C 807.15625,40.772792 807.51302,39.663418 808.22656,38.861328 C 808.94531,38.054045 809.93229,37.650399 811.1875,37.650391 C 812.28645,37.650399 813.16666,37.942066 813.82813,38.525391 C 814.49478,39.108731 814.86718,39.92123 814.94531,40.962891 L 812.6875,40.962891 C 812.62499,40.509772 812.46614,40.163418 812.21094,39.923828 C 811.95572,39.684252 811.61979,39.56446 811.20313,39.564453 C 810.64062,39.56446 810.21875,39.785814 809.9375,40.228516 C 809.66146,40.67123 809.52343,41.335292 809.52344,42.220703 C 809.52343,43.038415 809.66666,43.668623 809.95313,44.111328 C 810.24479,44.54883 810.66145,44.76758 811.20313,44.767578 C 811.62499,44.76758 811.96354,44.639976 812.21875,44.384766 C 812.47395,44.12956 812.64062,43.749352 812.71875,43.244141 M 816.44531,46.447266 L 816.44531,34.939453 L 818.65625,34.939453 L 818.65625,40.978516 L 821.35938,37.955078 L 824.09375,37.955078 L 821.13281,41.103516 L 824.27344,46.447266 L 821.54688,46.447266 L 819.51563,42.830078 L 818.65625,43.759766 L 818.65625,46.447266 L 816.44531,46.447266 M 824.79688,43.681641 L 827.0625,43.681641 C 827.08333,44.113935 827.23958,44.436851 827.53125,44.650391 C 827.82291,44.858726 828.26041,44.962892 828.84375,44.962891 C 829.28645,44.962892 829.6276,44.889976 829.86719,44.744141 C 830.11197,44.593101 830.23437,44.382164 830.23438,44.111328 C 830.23437,43.725914 829.78124,43.436852 828.875,43.244141 C 828.5052,43.166019 828.21093,43.098311 827.99219,43.041016 C 826.88802,42.759769 826.11979,42.426436 825.6875,42.041016 C 825.26042,41.655604 825.04687,41.134771 825.04688,40.478516 C 825.04687,39.608731 825.35937,38.921231 825.98438,38.416016 C 826.61458,37.905608 827.46614,37.650399 828.53906,37.650391 C 829.67447,37.650399 830.5651,37.903003 831.21094,38.408203 C 831.86197,38.913419 832.20833,39.624356 832.25,40.541016 L 830.03906,40.541016 C 830.02343,40.181647 829.88541,39.903001 829.625,39.705078 C 829.36979,39.507168 829.01302,39.40821 828.55469,39.408203 C 828.12239,39.40821 827.79948,39.473314 827.58594,39.603516 C 827.3776,39.733731 827.27343,39.929043 827.27344,40.189453 C 827.27343,40.528001 827.83854,40.82748 828.96875,41.087891 C 829.22916,41.145188 829.43489,41.192063 829.58594,41.228516 C 830.71614,41.494146 831.48697,41.814458 831.89844,42.189453 C 832.3151,42.564457 832.52343,43.093102 832.52344,43.775391 C 832.52343,44.738934 832.18228,45.473308 831.5,45.978516 C 830.82291,46.483724 829.83593,46.736328 828.53906,46.736328 C 827.36718,46.736328 826.45052,46.473307 825.78906,45.947266 C 825.1276,45.421225 824.79687,44.697267 824.79688,43.775391 L 824.79688,43.681641 M 840.02344,42.251953 C 840.02343,41.397792 839.86197,40.74675 839.53906,40.298828 C 839.21614,39.84571 838.74739,39.619147 838.13281,39.619141 C 837.52864,39.619147 837.0677,39.843106 836.75,40.291016 C 836.4375,40.738938 836.28125,41.392583 836.28125,42.251953 C 836.28125,43.05404 836.44531,43.673831 836.77344,44.111328 C 837.10677,44.54883 837.57552,44.76758 838.17969,44.767578 C 838.7526,44.76758 839.20312,44.543622 839.53125,44.095703 C 839.85937,43.647789 840.02343,43.033207 840.02344,42.251953 M 834.07031,49.853516 L 834.07031,37.955078 L 836.23438,37.955078 L 836.23438,39.103516 C 836.5625,38.603523 836.92708,38.23894 837.32813,38.009766 C 837.73437,37.780608 838.21093,37.666024 838.75781,37.666016 C 839.80468,37.666024 840.65364,38.080086 841.30469,38.908203 C 841.95572,39.731127 842.28124,40.814459 842.28125,42.158203 C 842.28124,43.517581 841.95572,44.621747 841.30469,45.470703 C 840.65364,46.314453 839.8151,46.736328 838.78906,46.736328 C 838.24739,46.736328 837.76302,46.621745 837.33594,46.392578 C 836.91406,46.163412 836.5625,45.830079 836.28125,45.392578 L 836.28125,49.853516 L 834.07031,49.853516 M 848.70313,45.392578 C 848.41666,45.835287 848.04166,46.173828 847.57813,46.408203 C 847.11458,46.63737 846.57552,46.751953 845.96094,46.751953 C 845.13802,46.751953 844.5026,46.517578 844.05469,46.048828 C 843.61198,45.580079 843.39062,44.913413 843.39063,44.048828 C 843.39062,43.246748 843.61198,42.634769 844.05469,42.212891 C 844.5026,41.79102 845.23958,41.501958 846.26563,41.345703 C 846.5,41.30925 846.80729,41.267583 847.1875,41.220703 C 848.15104,41.095708 848.63281,40.817063 848.63281,40.384766 C 848.63281,40.041022 848.52604,39.796231 848.3125,39.650391 C 848.09895,39.499356 847.74218,39.423835 847.24219,39.423828 C 846.78385,39.423835 846.43229,39.514981 846.1875,39.697266 C 845.94271,39.879564 845.82031,40.13998 845.82031,40.478516 L 845.82031,40.603516 L 843.69531,40.603516 L 843.69531,40.447266 C 843.69531,39.577481 844.0026,38.89519 844.61719,38.400391 C 845.23177,37.900399 846.08073,37.650399 847.16406,37.650391 C 848.35156,37.650399 849.26041,37.856128 849.89063,38.267578 C 850.52603,38.679044 850.84374,39.272794 850.84375,40.048828 L 850.84375,44.876953 C 850.84374,45.231121 850.8802,45.496746 850.95313,45.673828 C 851.02603,45.845704 851.14843,45.975912 851.32031,46.064453 L 851.32031,46.447266 L 848.95313,46.447266 C 848.87499,46.301432 848.8151,46.139974 848.77344,45.962891 C 848.73176,45.785808 848.70833,45.595704 848.70313,45.392578 M 848.66406,42.267578 C 848.29427,42.439457 847.86718,42.577478 847.38281,42.681641 C 846.90364,42.785811 846.65625,42.840498 846.64063,42.845703 C 846.23958,42.96029 845.95833,43.103519 845.79688,43.275391 C 845.64062,43.447269 845.5625,43.684248 845.5625,43.986328 C 845.5625,44.29883 845.66406,44.54883 845.86719,44.736328 C 846.07031,44.918621 846.34375,45.009767 846.6875,45.009766 C 847.30208,45.009767 847.78385,44.837892 848.13281,44.494141 C 848.48697,44.145185 848.66406,43.671227 848.66406,43.072266 L 848.66406,42.267578 M 857.96875,43.244141 L 860.21094,43.244141 C 860.11718,44.322268 859.72395,45.173829 859.03125,45.798828 C 858.33854,46.423828 857.44791,46.736328 856.35938,46.736328 C 855.125,46.736328 854.15625,46.335287 853.45313,45.533203 C 852.75521,44.725913 852.40625,43.611331 852.40625,42.189453 C 852.40625,40.772792 852.76302,39.663418 853.47656,38.861328 C 854.19531,38.054045 855.18229,37.650399 856.4375,37.650391 C 857.53645,37.650399 858.41666,37.942066 859.07813,38.525391 C 859.74478,39.108731 860.11718,39.92123 860.19531,40.962891 L 857.9375,40.962891 C 857.87499,40.509772 857.71614,40.163418 857.46094,39.923828 C 857.20572,39.684252 856.86979,39.56446 856.45313,39.564453 C 855.89062,39.56446 855.46875,39.785814 855.1875,40.228516 C 854.91146,40.67123 854.77343,41.335292 854.77344,42.220703 C 854.77343,43.038415 854.91666,43.668623 855.20313,44.111328 C 855.49479,44.54883 855.91145,44.76758 856.45313,44.767578 C 856.87499,44.76758 857.21354,44.639976 857.46875,44.384766 C 857.72395,44.12956 857.89062,43.749352 857.96875,43.244141 M 866.88281,43.869141 L 869.14844,43.869141 C 868.91926,44.764976 868.45572,45.4681 867.75781,45.978516 C 867.0651,46.483724 866.21874,46.736328 865.21875,46.736328 C 863.98958,46.736328 863.01562,46.32487 862.29688,45.501953 C 861.57812,44.67383 861.21875,43.554039 861.21875,42.142578 C 861.21875,40.751959 861.57292,39.655606 862.28125,38.853516 C 862.98958,38.051441 863.95833,37.650399 865.1875,37.650391 C 866.48958,37.650399 867.49478,38.046232 868.20313,38.837891 C 868.91145,39.624356 869.26562,40.74675 869.26563,42.205078 C 869.26562,42.366541 869.26301,42.488936 869.25781,42.572266 C 869.2578,42.650394 869.2526,42.725915 869.24219,42.798828 L 863.57031,42.798828 C 863.60156,43.465498 863.76302,43.968101 864.05469,44.306641 C 864.35156,44.645184 864.77604,44.814455 865.32813,44.814453 C 865.71874,44.814455 866.03906,44.738934 866.28906,44.587891 C 866.53906,44.431643 866.73697,44.19206 866.88281,43.869141 M 863.57031,41.306641 L 866.91406,41.306641 C 866.89322,40.73373 866.73958,40.298834 866.45313,40.001953 C 866.17187,39.699877 865.76562,39.548835 865.23438,39.548828 C 864.73958,39.548835 864.34895,39.699877 864.0625,40.001953 C 863.78125,40.304043 863.61718,40.738938 863.57031,41.306641" + id="text5207" /> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1" + d="M 840,17.646484 L 797.02608,17.646484" + id="path5439" /> + <path + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="M 802.5,25.146484 L 802.5,10.146484 L 787.5,17.646484 L 802.5,25.146484 z " + id="path5441" /> + <g + id="g5459" + transform="translate(0,7.5)"> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" + d="M 82.50003,75 L 54.020182,75" + id="path5453" /> + <path + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z " + id="path5455" /> + <path + id="path5457" + d="M 45,67.5 C 45,82.5 45,82.5 45,82.5" + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> + </g> + <g + id="g5464" + transform="matrix(-1,9.581637e-17,-9.581637e-17,-1,127.5,172.5)"> + <path + id="path5466" + d="M 82.50003,75 L 54.020182,75" + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> + <path + id="path5468" + d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z " + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" /> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" + d="M 45,67.5 C 45,82.5 45,82.5 45,82.5" + id="path5470" /> + </g> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 107.0625,80.560547 L 105.23438,78.779297 L 107.17969,76.763672 L 109.05469,78.591797 C 109.30467,78.123052 109.49608,77.587897 109.62891,76.986328 C 109.7617,76.384773 109.82811,75.728524 109.82813,75.017578 C 109.82811,73.119151 109.40233,71.646496 108.55078,70.599609 C 107.69921,69.544936 106.5078,69.017593 104.97656,69.017578 C 103.46093,69.017593 102.28124,69.54103 101.4375,70.587891 C 100.59374,71.634778 100.17187,73.111339 100.17188,75.017578 C 100.17187,76.916022 100.59374,78.392583 101.4375,79.447266 C 102.28124,80.494144 103.46093,81.017581 104.97656,81.017578 C 105.36718,81.017581 105.73436,80.978518 106.07813,80.900391 C 106.42968,80.822268 106.7578,80.708987 107.0625,80.560547 M 109.55859,82.916016 C 108.97264,83.306641 108.28905,83.603516 107.50781,83.806641 C 106.73436,84.009765 105.89061,84.111328 104.97656,84.111328 C 102.39843,84.111328 100.34765,83.291016 98.824219,81.650391 C 97.308592,80.009769 96.55078,77.798834 96.550781,75.017578 C 96.55078,72.228527 97.308592,70.017592 98.824219,68.384766 C 100.34765,66.744158 102.39843,65.923846 104.97656,65.923828 C 107.55468,65.923846 109.60545,66.744158 111.12891,68.384766 C 112.66014,70.025404 113.42576,72.23634 113.42578,75.017578 C 113.42576,76.236336 113.26951,77.353522 112.95703,78.369141 C 112.64451,79.376957 112.18358,80.259769 111.57422,81.017578 L 113.44922,82.810547 L 111.52734,84.826172 L 109.55859,82.916016" + id="text5474" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 158.94141,83.630859 L 153.99609,66.369141 L 157.67578,66.369141 L 160.62891,78.544922 L 163.125,66.369141 L 166.91016,66.369141 L 169.40625,78.544922 L 172.35938,66.369141 L 176.00391,66.369141 L 171.07031,83.630859 L 167.68359,83.630859 L 165.01172,70.412109 L 162.32813,83.630859 L 158.94141,83.630859" + id="text5482" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 218.52539,83.630859 L 218.52539,66.369141 L 231.05273,66.369141 L 231.05273,69.369141 L 222.0293,69.369141 L 222.0293,73.048828 L 230.2793,73.048828 L 230.2793,76.001953 L 222.0293,76.001953 L 222.0293,80.443359 L 231.47461,80.443359 L 231.47461,83.630859 L 218.52539,83.630859" + id="text5492" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 281.4375,73.916016 L 285.60938,73.916016 C 286.51561,73.916025 287.17968,73.732432 287.60156,73.365234 C 288.03124,72.998058 288.24608,72.419933 288.24609,71.630859 C 288.24608,70.880872 288.03905,70.314466 287.625,69.931641 C 287.21093,69.54103 286.59374,69.345717 285.77344,69.345703 L 281.4375,69.345703 L 281.4375,73.916016 M 277.88672,83.630859 L 277.88672,66.369141 L 286.25391,66.369141 C 288.13671,66.369158 289.53124,66.771501 290.4375,67.576172 C 291.34373,68.380875 291.79686,69.611342 291.79688,71.267578 C 291.79686,72.322277 291.5742,73.201182 291.12891,73.904297 C 290.69139,74.607431 290.05858,75.087899 289.23047,75.345703 C 289.98045,75.611336 290.5117,76.017586 290.82422,76.564453 C 291.14452,77.111335 291.32811,77.962896 291.375,79.119141 L 291.44531,81.158203 C 291.4453,81.173831 291.4453,81.197268 291.44531,81.228516 C 291.46873,82.259767 291.69139,82.884766 292.11328,83.103516 L 292.11328,83.630859 L 288.22266,83.630859 C 288.09764,83.388672 287.99999,83.091797 287.92969,82.740234 C 287.86718,82.380861 287.82811,81.95508 287.8125,81.462891 L 287.76563,79.646484 C 287.72655,78.576177 287.52343,77.853521 287.15625,77.478516 C 286.79686,77.103522 286.14452,76.916022 285.19922,76.916016 L 281.4375,76.916016 L 281.4375,83.630859 L 277.88672,83.630859" + id="text5500" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 343.24219,83.630859 L 343.24219,69.451172 L 338.12109,69.451172 L 338.12109,66.369141 L 351.87891,66.369141 L 351.87891,69.451172 L 346.79297,69.451172 L 346.79297,83.630859 L 343.24219,83.630859" + id="text5504" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 407.06836,83.630859 L 403.51758,83.630859 L 403.51758,77.197266 L 397.24805,66.369141 L 401.5957,66.369141 L 405.28711,73.810547 L 408.69727,66.369141 L 412.75195,66.369141 L 407.06836,77.197266 L 407.06836,83.630859" + id="text5518" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 458.08594,66.105469 L 461.67188,66.105469 L 461.67188,76.933594 C 461.67187,78.269536 461.93749,79.246098 462.46875,79.863281 C 462.99999,80.472659 463.84374,80.777346 465,80.777344 C 466.17187,80.777346 467.02343,80.472659 467.55469,79.863281 C 468.09374,79.25391 468.36327,78.277349 468.36328,76.933594 L 468.36328,66.105469 L 471.91406,66.105469 L 471.91406,77.320313 C 471.91405,79.437504 471.3203,81.062502 470.13281,82.195313 C 468.95311,83.328125 467.24999,83.894531 465.02344,83.894531 C 462.78124,83.894531 461.0625,83.332031 459.86719,82.207031 C 458.67969,81.074221 458.08594,79.445316 458.08594,77.320313 L 458.08594,66.105469" + id="text5522" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 523.22461,83.630859 L 523.22461,66.369141 L 526.77539,66.369141 L 526.77539,83.630859 L 523.22461,83.630859" + id="text5526" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 580.18359,75 C 580.18359,76.898444 580.60546,78.375005 581.44922,79.429688 C 582.29296,80.476566 583.47265,81.000003 584.98828,81 C 586.51952,81.000003 587.71093,80.476566 588.5625,79.429688 C 589.41405,78.375005 589.83983,76.898444 589.83984,75 C 589.83983,73.101573 589.41405,71.628918 588.5625,70.582031 C 587.71093,69.527358 586.51952,69.000015 584.98828,69 C 583.47265,69.000015 582.29296,69.523452 581.44922,70.570313 C 580.60546,71.617199 580.18359,73.093761 580.18359,75 M 576.5625,75 C 576.5625,72.210949 577.32031,70.000014 578.83594,68.367188 C 580.35937,66.726579 582.41015,65.906268 584.98828,65.90625 C 587.56639,65.906268 589.61717,66.726579 591.14063,68.367188 C 592.67186,70.007826 593.43748,72.218761 593.4375,75 C 593.43748,77.781256 592.67186,79.992191 591.14063,81.632813 C 589.61717,83.273438 587.56639,84.09375 584.98828,84.09375 C 582.41015,84.09375 580.35937,83.273438 578.83594,81.632813 C 577.32031,79.992191 576.5625,77.781256 576.5625,75" + id="text5530" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 641.97656,74.361328 L 645.41016,74.361328 C 646.33983,74.361337 647.01561,74.166025 647.4375,73.775391 C 647.85936,73.376963 648.0703,72.740245 648.07031,71.865234 C 648.0703,71.044934 647.86327,70.423841 647.44922,70.001953 C 647.03515,69.580092 646.41796,69.369155 645.59766,69.369141 L 641.97656,69.369141 L 641.97656,74.361328 M 641.95313,77.490234 L 641.95313,83.630859 L 638.40234,83.630859 L 638.40234,66.369141 L 646.07813,66.369141 C 647.89061,66.369158 649.26171,66.841814 650.19141,67.787109 C 651.12889,68.724624 651.59764,70.103529 651.59766,71.923828 C 651.59764,73.705088 651.14061,75.080087 650.22656,76.048828 C 649.31249,77.009772 648.0078,77.490241 646.3125,77.490234 L 641.95313,77.490234" + id="text5534" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 709.24805,63.919922 L 709.24805,66.369141 C 709.17772,66.369155 709.08007,66.365249 708.95508,66.357422 C 708.83007,66.349624 708.74413,66.345718 708.69727,66.345703 C 707.90819,66.345718 707.37304,66.498062 707.0918,66.802734 C 706.81835,67.099624 706.68163,67.732435 706.68164,68.701172 L 706.68164,71.513672 C 706.68163,72.66993 706.50585,73.490242 706.1543,73.974609 C 705.80273,74.458991 705.16992,74.806647 704.25586,75.017578 C 705.16992,75.228522 705.80273,75.572271 706.1543,76.048828 C 706.50585,76.525395 706.68163,77.341801 706.68164,78.498047 L 706.68164,81.322266 C 706.68163,82.283202 706.81835,82.912108 707.0918,83.208984 C 707.36523,83.505857 707.90038,83.654294 708.69727,83.654297 C 708.74413,83.654294 708.83007,83.650388 708.95508,83.642578 C 709.08007,83.634763 709.17772,83.630857 709.24805,83.630859 L 709.24805,86.080078 C 709.13866,86.080073 708.98632,86.08398 708.79102,86.091797 C 708.59569,86.099605 708.45116,86.103511 708.35742,86.103516 C 707.57616,86.103511 706.92382,86.056636 706.40039,85.962891 C 705.87695,85.869136 705.43163,85.724605 705.06445,85.529297 C 704.61913,85.263668 704.30273,84.904293 704.11523,84.451172 C 703.93554,84.005857 703.8457,83.228514 703.8457,82.119141 L 703.8457,79.166016 C 703.8457,78.095706 703.64648,77.337895 703.24805,76.892578 C 702.84961,76.439458 702.17773,76.212896 701.23242,76.212891 C 701.18554,76.212896 701.10742,76.216802 700.99805,76.224609 C 700.88867,76.232427 700.80664,76.236333 700.75195,76.236328 L 700.75195,73.787109 C 700.80664,73.787117 700.88867,73.791023 700.99805,73.798828 C 701.10742,73.806648 701.18554,73.810554 701.23242,73.810547 C 702.16992,73.810554 702.83789,73.583992 703.23633,73.130859 C 703.64257,72.677743 703.8457,71.912119 703.8457,70.833984 L 703.8457,67.904297 C 703.8457,66.787124 703.93554,66.001968 704.11523,65.548828 C 704.30273,65.095719 704.61913,64.736345 705.06445,64.470703 C 705.43163,64.275408 705.87695,64.130876 706.40039,64.037109 C 706.92382,63.943377 707.57616,63.896502 708.35742,63.896484 C 708.45116,63.896502 708.59569,63.900408 708.79102,63.908203 C 708.98632,63.916033 709.13866,63.919939 709.24805,63.919922 M 703.0957,93.966797 L 709.01367,93.966797 L 709.01367,96.462891 L 706.25977,96.462891 L 706.25977,113.8418 L 709.01367,113.8418 L 709.01367,116.33789 L 703.0957,116.33789 L 703.0957,93.966797" + id="text5546" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 760.75195,63.908203 L 761.54883,63.908203 C 762.4082,63.90822 763.09961,63.955095 763.62305,64.048828 C 764.14648,64.142595 764.58398,64.291033 764.93555,64.494141 C 765.38085,64.744157 765.69335,65.103532 765.87305,65.572266 C 766.06054,66.033218 766.15429,66.806655 766.1543,67.892578 L 766.1543,70.845703 C 766.15429,71.916025 766.35351,72.677743 766.75195,73.130859 C 767.15038,73.57618 767.82226,73.798836 768.76758,73.798828 C 768.81444,73.798836 768.89257,73.794929 769.00195,73.787109 C 769.11132,73.779304 769.19335,73.775398 769.24805,73.775391 L 769.24805,76.224609 L 768.81445,76.224609 C 767.83788,76.224614 767.15038,76.443364 766.75195,76.880859 C 766.35351,77.318363 766.15429,78.076175 766.1543,79.154297 L 766.1543,82.107422 C 766.15429,83.224607 766.06054,84.009763 765.87305,84.462891 C 765.69335,84.916012 765.38085,85.267574 764.93555,85.517578 C 764.56835,85.712886 764.12304,85.857417 763.59961,85.951172 C 763.07617,86.044917 762.42382,86.091792 761.64258,86.091797 C 761.54883,86.091792 761.40429,86.087886 761.20898,86.080078 C 761.01367,86.072261 760.86133,86.068355 760.75195,86.068359 L 760.75195,83.619141 C 760.82226,83.619138 760.91992,83.623044 761.04492,83.630859 C 761.16992,83.638669 761.25586,83.642576 761.30273,83.642578 C 762.09179,83.642576 762.62304,83.490232 762.89648,83.185547 C 763.17773,82.88867 763.31836,82.263671 763.31836,81.310547 L 763.31836,78.509766 C 763.31836,77.337895 763.49414,76.513677 763.8457,76.037109 C 764.19726,75.55274 764.83007,75.20899 765.74414,75.005859 C 764.83007,74.794928 764.19726,74.447272 763.8457,73.962891 C 763.49414,73.478523 763.31836,72.658212 763.31836,71.501953 L 763.31836,68.666016 C 763.31836,67.712904 763.17773,67.087905 762.89648,66.791016 C 762.62304,66.486343 762.09179,66.333999 761.30273,66.333984 C 761.25586,66.333999 761.16992,66.337906 761.04492,66.345703 C 760.91992,66.35353 760.82226,66.357437 760.75195,66.357422 L 760.75195,63.908203 M 767.00977,93.955078 L 767.00977,116.32617 L 761.08008,116.32617 L 761.08008,113.83008 L 763.8457,113.83008 L 763.8457,96.451172 L 761.08008,96.451172 L 761.08008,93.955078 L 767.00977,93.955078" + id="text5554" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 823.79883,62.977287 L 826.21289,62.977287 L 826.21289,86.977287 L 823.79883,86.977287 L 823.79883,62.977287 M 827.10352,113.54369 L 821.29102,93.6101 L 822.87305,93.6101 L 828.70898,113.54369 L 827.10352,113.54369" + id="text5564" /> + <g + id="g3597"> + <path + id="text5570" + d="M 22.996094,139.10156 C 22.907541,140.40886 22.403635,141.44792 21.484375,142.21875 C 20.565095,142.98958 19.365878,143.375 17.886719,143.375 C 16.183589,143.375 14.859372,142.84375 13.914063,141.78125 C 12.968749,140.71875 12.496093,139.22917 12.496094,137.3125 C 12.496093,135.35417 12.977863,133.85418 13.941406,132.8125 C 14.904945,131.77084 16.29036,131.25001 18.097656,131.25 C 19.566398,131.25001 20.726554,131.60808 21.578125,132.32422 C 22.429677,133.04037 22.897124,134.05209 22.980469,135.35938 L 20.644531,135.35938 C 20.545564,134.70834 20.279939,134.21225 19.847656,133.87109 C 19.415357,133.52996 18.832024,133.35938 18.097656,133.35938 C 17.055984,133.35938 16.264318,133.69532 15.722656,134.36719 C 15.180986,135.03907 14.910153,136.02084 14.910156,137.3125 C 14.910153,138.5625 15.179684,139.52865 15.71875,140.21094 C 16.257808,140.89323 17.024734,141.23438 18.019531,141.23438 C 18.738274,141.23438 19.326815,141.05078 19.785156,140.68359 C 20.243481,140.31641 20.540356,139.78907 20.675781,139.10156 L 22.996094,139.10156 z M 29.558594,142 C 29.27213,142.44271 28.89713,142.77995 28.433594,143.01172 C 27.970048,143.24349 27.430986,143.35937 26.816406,143.35938 C 25.993487,143.35937 25.359373,143.125 24.914063,142.65625 C 24.468749,142.1875 24.246093,141.52083 24.246094,140.65625 C 24.246093,139.85417 24.468749,139.24219 24.914063,138.82031 C 25.359373,138.39844 26.09505,138.10938 27.121094,137.95313 C 27.355465,137.91667 27.662756,137.87501 28.042969,137.82813 C 29.006505,137.70313 29.488275,137.42448 29.488281,136.99219 C 29.488275,136.64844 29.381505,136.40235 29.167969,136.25391 C 28.954422,136.10548 28.597651,136.03126 28.097656,136.03125 C 27.639319,136.03126 27.287757,136.1224 27.042969,136.30469 C 26.798174,136.48699 26.675778,136.7474 26.675781,137.08594 L 26.675781,137.21094 L 24.550781,137.21094 L 24.550781,137.05469 C 24.55078,136.1849 24.858072,135.50131 25.472656,135.00391 C 26.087237,134.50652 26.936195,134.25782 28.019531,134.25781 C 29.207026,134.25782 30.117181,134.46355 30.75,134.875 C 31.382805,135.28647 31.699211,135.88022 31.699219,136.65625 L 31.699219,141.48438 C 31.699211,141.83854 31.735669,142.10287 31.808594,142.27734 C 31.881502,142.45182 32.003898,142.58333 32.175781,142.67188 L 32.175781,143.05469 L 29.808594,143.05469 C 29.730463,142.90885 29.670567,142.7474 29.628906,142.57031 C 29.587234,142.39323 29.563796,142.20313 29.558594,142 L 29.558594,142 z M 29.519531,138.875 C 29.149734,139.04688 28.723953,139.1849 28.242188,139.28906 C 27.760413,139.39323 27.511715,139.44792 27.496094,139.45313 C 27.095049,139.56771 26.815101,139.71094 26.65625,139.88281 C 26.497393,140.05469 26.417966,140.29167 26.417969,140.59375 C 26.417966,140.90625 26.519528,141.15495 26.722656,141.33984 C 26.925778,141.52474 27.199215,141.61719 27.542969,141.61719 C 28.157548,141.61719 28.64062,141.44401 28.992188,141.09766 C 29.343744,140.7513 29.519525,140.27865 29.519531,139.67969 L 29.519531,138.875 z M 39.691406,138.85938 C 39.691399,138.00521 39.529941,137.35287 39.207031,136.90234 C 38.884108,136.45183 38.415359,136.22657 37.800781,136.22656 C 37.19661,136.22657 36.736975,136.45053 36.421875,136.89844 C 36.106767,137.34636 35.949216,138.00001 35.949219,138.85938 C 35.949216,139.66146 36.11458,140.28125 36.445313,140.71875 C 36.776038,141.15625 37.243485,141.375 37.847656,141.375 C 38.420567,141.375 38.871088,141.15104 39.199219,140.70313 C 39.527337,140.25521 39.691399,139.64063 39.691406,138.85938 L 39.691406,138.85938 z M 33.738281,146.46094 L 33.738281,134.5625 L 35.902344,134.5625 L 35.902344,135.71094 C 36.230465,135.21095 36.59635,134.84636 37,134.61719 C 37.403641,134.38803 37.878901,134.27345 38.425781,134.27344 C 39.472649,134.27345 40.321607,134.68621 40.972656,135.51172 C 41.623689,136.33725 41.94921,137.42188 41.949219,138.76563 C 41.94921,140.125 41.623689,141.22787 40.972656,142.07422 C 40.321607,142.92057 39.483066,143.34375 38.457031,143.34375 C 37.915359,143.34375 37.432287,143.22917 37.007813,143 C 36.583329,142.77083 36.230465,142.4375 35.949219,142 L 35.949219,146.46094 L 33.738281,146.46094 z M 43.027344,140.28906 L 45.292969,140.28906 C 45.313799,140.72136 45.470049,141.04297 45.761719,141.25391 C 46.053382,141.46485 46.490881,141.57031 47.074219,141.57031 C 47.516922,141.57031 47.85937,141.4961 48.101563,141.34766 C 48.343744,141.19922 48.464838,140.98959 48.464844,140.71875 C 48.464838,140.33334 48.011713,140.04427 47.105469,139.85156 C 46.735673,139.77344 46.441402,139.70573 46.222656,139.64844 C 45.118487,139.36719 44.351561,139.03386 43.921875,138.64844 C 43.492187,138.26303 43.277343,137.74219 43.277344,137.08594 C 43.277343,136.21615 43.591145,135.52735 44.21875,135.01953 C 44.846352,134.51173 45.696611,134.25782 46.769531,134.25781 C 47.904943,134.25782 48.796869,134.51043 49.445313,135.01563 C 50.093742,135.52084 50.438794,136.23178 50.480469,137.14844 L 48.269531,137.14844 C 48.253901,136.78907 48.117182,136.51042 47.859375,136.3125 C 47.601557,136.11459 47.243485,136.01563 46.785156,136.01563 C 46.352861,136.01563 46.031246,136.08074 45.820313,136.21094 C 45.609372,136.34115 45.503903,136.53646 45.503906,136.79688 C 45.503903,137.13542 46.069007,137.4349 47.199219,137.69531 C 47.45963,137.75261 47.665359,137.79948 47.816406,137.83594 C 48.946608,138.10157 49.718743,138.42188 50.132813,138.79688 C 50.546867,139.17188 50.753898,139.70052 50.753906,140.38281 C 50.753898,141.34636 50.414055,142.08073 49.734375,142.58594 C 49.054681,143.09115 48.066401,143.34375 46.769531,143.34375 C 45.597653,143.34375 44.680987,143.08073 44.019531,142.55469 C 43.358072,142.02865 43.027343,141.30469 43.027344,140.38281 L 43.027344,140.28906 z M 57.011719,143.05469 L 57.011719,131.54688 L 59.378906,131.54688 L 59.378906,140.92969 L 64.996094,140.92969 L 64.996094,143.05469 L 57.011719,143.05469 z M 67.972656,138.79688 C 67.972653,139.64063 68.14583,140.29167 68.492188,140.75 C 68.838538,141.20834 69.332027,141.4375 69.972656,141.4375 C 70.602859,141.4375 71.09114,141.20834 71.4375,140.75 C 71.783847,140.29167 71.957024,139.64063 71.957031,138.79688 C 71.957024,137.95834 71.78515,137.3112 71.441406,136.85547 C 71.09765,136.39975 70.608067,136.17188 69.972656,136.17188 C 69.332027,136.17188 68.838538,136.39975 68.492188,136.85547 C 68.14583,137.3112 67.972653,137.95834 67.972656,138.79688 L 67.972656,138.79688 z M 65.667969,138.79688 C 65.667968,137.38542 66.05078,136.27605 66.816406,135.46875 C 67.582029,134.66147 68.634111,134.25782 69.972656,134.25781 C 71.305983,134.25782 72.356764,134.66147 73.125,135.46875 C 73.89322,136.27605 74.277335,137.38542 74.277344,138.79688 C 74.277335,140.21354 73.89322,141.32552 73.125,142.13281 C 72.356764,142.9401 71.305983,143.34375 69.972656,143.34375 C 68.634111,143.34375 67.582029,142.9401 66.816406,142.13281 C 66.05078,141.32552 65.667968,140.21354 65.667969,138.79688 L 65.667969,138.79688 z M 80.949219,139.85156 L 83.191406,139.85156 C 83.097648,140.92969 82.704419,141.78125 82.011719,142.40625 C 81.319004,143.03125 80.42838,143.34375 79.339844,143.34375 C 78.105465,143.34375 77.138019,142.94141 76.4375,142.13672 C 75.736978,141.33203 75.386718,140.21875 75.386719,138.79688 C 75.386718,137.38021 75.744791,136.26954 76.460938,135.46484 C 77.177081,134.66016 78.162757,134.25782 79.417969,134.25781 C 80.516921,134.25782 81.398431,134.54949 82.0625,135.13281 C 82.726555,135.71615 83.097648,136.52865 83.175781,137.57031 L 80.917969,137.57031 C 80.855463,137.11719 80.696609,136.77084 80.441406,136.53125 C 80.186193,136.29167 79.850255,136.17188 79.433594,136.17188 C 78.87109,136.17188 78.450517,136.39324 78.171875,136.83594 C 77.893226,137.27865 77.753903,137.94271 77.753906,138.82813 C 77.753903,139.64584 77.898434,140.27474 78.1875,140.71484 C 78.476559,141.15495 78.891923,141.375 79.433594,141.375 C 79.855464,141.375 80.194005,141.2474 80.449219,140.99219 C 80.704421,140.73698 80.871088,140.35677 80.949219,139.85156 L 80.949219,139.85156 z M 84.675781,143.05469 L 84.675781,131.54688 L 86.886719,131.54688 L 86.886719,137.58594 L 89.589844,134.5625 L 92.324219,134.5625 L 89.363281,137.71094 L 92.503906,143.05469 L 89.777344,143.05469 L 87.746094,139.4375 L 86.886719,140.36719 L 86.886719,143.05469 L 84.675781,143.05469 z " + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" /> + <path + id="path5584" + d="M 23.746094,146.25 L 12.496094,161.25 L 19.996094,161.25 L 19.996094,168.75 L 27.496094,168.75 L 27.496094,161.25 L 34.996094,161.25 L 23.746094,146.25 z M 22.714844,150.46875 L 24.746094,150.46875 L 27.871094,159.09375 L 25.996094,159.09375 L 25.402344,157.3125 L 22.058594,157.3125 L 21.496094,159.09375 L 19.621094,159.09375 L 22.714844,150.46875 z M 23.746094,152.1875 L 22.527344,155.84375 L 24.933594,155.84375 L 23.746094,152.1875 z " + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" /> + </g> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 119.9707,129.82617 L 117.58008,137.17383 L 122.37305,137.17383 L 119.9707,129.82617 M 117.9082,126.36914 L 122.00977,126.36914 L 128.23242,143.63086 L 124.50586,143.63086 L 123.33398,140.08008 L 116.64258,140.08008 L 115.50586,143.63086 L 111.76758,143.63086 L 117.9082,126.36914" + id="text5641" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 172.98047,138.29297 L 176.48438,138.29297 C 176.61718,139.23829 177.0039,139.94141 177.64453,140.40234 C 178.28515,140.85547 179.21093,141.08203 180.42188,141.08203 C 181.45312,141.08203 182.23046,140.89844 182.75391,140.53125 C 183.27733,140.16407 183.53905,139.6211 183.53906,138.90234 C 183.53905,137.85547 182.03515,136.98829 179.02734,136.30078 C 178.98827,136.29298 178.95312,136.28516 178.92188,136.27734 C 178.84374,136.26173 178.72265,136.23438 178.55859,136.19531 C 176.94921,135.84376 175.80078,135.44923 175.11328,135.01172 C 174.5039,134.6211 174.03906,134.09767 173.71875,133.44141 C 173.39844,132.77735 173.23828,131.99611 173.23828,131.09766 C 173.23828,129.41798 173.80859,128.13283 174.94922,127.24219 C 176.08984,126.34377 177.73828,125.89455 179.89453,125.89453 C 181.91015,125.89455 183.48436,126.37111 184.61719,127.32422 C 185.7578,128.27736 186.35936,129.62111 186.42188,131.35547 L 183.01172,131.35547 C 182.94921,130.51954 182.6289,129.88283 182.05078,129.44531 C 181.47265,129.00783 180.64843,128.78908 179.57813,128.78906 C 178.64843,128.78908 177.92968,128.97267 177.42188,129.33984 C 176.92187,129.69923 176.67187,130.21486 176.67188,130.88672 C 176.67187,131.80079 177.65234,132.48439 179.61328,132.9375 C 180.14452,133.06251 180.55859,133.16017 180.85547,133.23047 C 182.11327,133.55079 183.0039,133.80079 183.52734,133.98047 C 184.05858,134.16017 184.51952,134.35938 184.91016,134.57813 C 185.61327,134.96876 186.14061,135.48829 186.49219,136.13672 C 186.84374,136.77735 187.01952,137.54688 187.01953,138.44531 C 187.01952,140.24219 186.41405,141.63672 185.20313,142.62891 C 183.99218,143.61328 182.28515,144.10547 180.08203,144.10547 C 177.91015,144.10547 176.20703,143.60156 174.97266,142.59375 C 173.73828,141.58594 173.07422,140.15235 172.98047,138.29297" + id="text5645" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 236.16211,140.51367 L 239.00977,140.51367 C 240.65819,140.51367 241.8496,140.08399 242.58398,139.22461 C 243.32616,138.35743 243.69725,136.95508 243.69727,135.01758 C 243.69725,133.0879 243.3535,131.66993 242.66602,130.76367 C 241.9785,129.85744 240.90429,129.40431 239.44336,129.4043 L 236.16211,129.4043 L 236.16211,140.51367 M 232.68164,143.63086 L 232.68164,126.36914 L 239.44336,126.36914 C 242.09179,126.36916 244.06444,127.084 245.36133,128.51367 C 246.666,129.94337 247.31834,132.11134 247.31836,135.01758 C 247.31834,136.59571 247.07616,137.98633 246.5918,139.18945 C 246.11522,140.39258 245.41991,141.36133 244.50586,142.0957 C 243.81835,142.64258 243.0371,143.03711 242.16211,143.2793 C 241.2871,143.51367 240.06054,143.63086 238.48242,143.63086 L 232.68164,143.63086" + id="text5649" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 293.97656,143.63086 L 293.97656,126.36914 L 306.02344,126.36914 L 306.02344,129.36914 L 297.48047,129.36914 L 297.48047,133.2832 L 304.96875,133.2832 L 304.96875,136.2832 L 297.48047,136.2832 L 297.48047,143.63086 L 293.97656,143.63086" + id="text5653" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 365.17969,141.57422 C 364.53905,142.44141 363.80858,143.07813 362.98828,143.48438 C 362.17577,143.89062 361.21874,144.09375 360.11719,144.09375 C 357.70312,144.09375 355.74609,143.25781 354.24609,141.58594 C 352.7539,139.90625 352.00781,137.70313 352.00781,134.97656 C 352.00781,132.22657 352.7539,130.02736 354.24609,128.37891 C 355.73828,126.73049 357.72656,125.90627 360.21094,125.90625 C 362.37499,125.90627 364.14061,126.4258 365.50781,127.46484 C 366.87498,128.49611 367.68748,129.91798 367.94531,131.73047 L 364.32422,131.73047 C 364.10546,130.83204 363.65624,130.14845 362.97656,129.67969 C 362.30468,129.21095 361.42577,128.97658 360.33984,128.97656 C 358.89452,128.97658 357.75781,129.50783 356.92969,130.57031 C 356.10937,131.62501 355.69921,133.08595 355.69922,134.95313 C 355.69921,136.82813 356.1289,138.29688 356.98828,139.35938 C 357.84765,140.42188 359.02734,140.95313 360.52734,140.95313 C 361.65233,140.95313 362.59374,140.6211 363.35156,139.95703 C 364.10936,139.29297 364.57811,138.38282 364.75781,137.22656 L 360.84375,137.22656 L 360.84375,134.27344 L 367.99219,134.27344 L 367.99219,143.61328 L 365.61328,143.61328 L 365.17969,141.57422" + id="text5657" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 412.86328,143.63086 L 412.86328,126.36914 L 416.4375,126.36914 L 416.4375,132.80273 L 423.5625,132.80273 L 423.5625,126.36914 L 427.13672,126.36914 L 427.13672,143.63086 L 423.5625,143.63086 L 423.5625,135.97852 L 416.4375,135.97852 L 416.4375,143.63086 L 412.86328,143.63086" + id="text5661" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 474.48047,136.95703 L 477.91406,136.95703 L 477.91406,139.04297 C 477.91406,139.64453 478.09375,140.10547 478.45313,140.42578 C 478.8125,140.73828 479.32812,140.89453 480,140.89453 C 480.73437,140.89453 481.24609,140.70313 481.53516,140.32031 C 481.82421,139.9375 481.96874,139.21875 481.96875,138.16406 L 481.96875,126.12891 L 485.51953,126.12891 L 485.51953,138.32813 C 485.51952,139.42188 485.45311,140.22657 485.32031,140.74219 C 485.1953,141.25 484.98436,141.69922 484.6875,142.08984 C 484.23436,142.66797 483.61327,143.10938 482.82422,143.41406 C 482.03515,143.71875 481.10937,143.87109 480.04688,143.87109 C 479.07031,143.87109 478.20703,143.73828 477.45703,143.47266 C 476.70703,143.20703 476.08203,142.8125 475.58203,142.28906 C 475.18359,141.86719 474.89844,141.39844 474.72656,140.88281 C 474.5625,140.35938 474.48047,139.5 474.48047,138.30469 L 474.48047,136.95703" + id="text5665" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 532.32422,143.63086 L 532.32422,126.36914 L 535.875,126.36914 L 535.875,133.45898 L 542.61328,126.36914 L 547.05469,126.36914 L 540.16406,133.35352 L 547.67578,143.63086 L 543.33984,143.63086 L 537.71484,135.73242 L 535.875,137.56055 L 535.875,143.63086 L 532.32422,143.63086" + id="text5669" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 594.01172,143.63086 L 594.01172,126.36914 L 597.5625,126.36914 L 597.5625,140.44336 L 605.98828,140.44336 L 605.98828,143.63086 L 594.01172,143.63086" + id="text5673" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 143.15039,203.63086 L 143.15039,200.63086 L 152.53711,189.49805 L 143.33789,189.49805 L 143.33789,186.36914 L 156.84961,186.36914 L 156.84961,189.36914 L 147.43945,200.51367 L 156.63867,200.51367 L 156.63867,203.63086 L 143.15039,203.63086" + id="text5679" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 202.37109,203.63086 L 207.79688,194.81836 L 202.37109,186.36914 L 206.47266,186.36914 L 210,192.4043 L 213.50391,186.36914 L 217.62891,186.36914 L 212.20313,194.79492 L 217.62891,203.63086 L 213.52734,203.63086 L 210,197.6543 L 206.47266,203.63086 L 202.37109,203.63086" + id="text5683" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 277.875,197.68359 C 277.74217,199.64454 276.98436,201.20313 275.60156,202.35938 C 274.22655,203.51563 272.42968,204.09375 270.21094,204.09375 C 267.65624,204.09375 265.66796,203.29688 264.24609,201.70313 C 262.83203,200.10938 262.125,197.87501 262.125,195 C 262.125,192.06251 262.84765,189.81251 264.29297,188.25 C 265.73828,186.68752 267.8164,185.90627 270.52734,185.90625 C 272.73046,185.90627 274.46874,186.44533 275.74219,187.52344 C 277.02342,188.59377 277.72655,190.10939 277.85156,192.07031 L 274.34766,192.07031 C 274.19921,191.09376 273.80077,190.35158 273.15234,189.84375 C 272.50389,189.32814 271.6289,189.07033 270.52734,189.07031 C 268.96484,189.07033 267.77734,189.57423 266.96484,190.58203 C 266.15234,191.58986 265.74609,193.06251 265.74609,195 C 265.74609,196.87501 266.14843,198.32422 266.95313,199.34766 C 267.76562,200.3711 268.91796,200.88282 270.41016,200.88281 C 271.48827,200.88282 272.37108,200.60938 273.05859,200.0625 C 273.74608,199.50782 274.19139,198.71485 274.39453,197.68359 L 277.875,197.68359" + id="text5687" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 328.33594,203.63086 L 322.38281,186.36914 L 326.32031,186.36914 L 329.98828,199.2832 L 333.72656,186.36914 L 337.61719,186.36914 L 331.73438,203.63086 L 328.33594,203.63086" + id="text5691" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 386.32031,200.51367 L 390.52734,200.51367 C 391.51952,200.51367 392.24218,200.33399 392.69531,199.97461 C 393.14843,199.61524 393.37499,199.04883 393.375,198.27539 C 393.37499,197.47071 393.15233,196.89258 392.70703,196.54102 C 392.26171,196.18165 391.52733,196.00196 390.50391,196.00195 L 386.32031,196.00195 L 386.32031,200.51367 M 386.32031,193.04883 L 390.375,193.04883 C 391.24999,193.04884 391.89061,192.9004 392.29688,192.60352 C 392.70311,192.29884 392.90624,191.82228 392.90625,191.17383 C 392.90624,190.54103 392.70702,190.084 392.30859,189.80273 C 391.91796,189.51369 391.26561,189.36915 390.35156,189.36914 L 386.32031,189.36914 L 386.32031,193.04883 M 382.92188,203.63086 L 382.92188,186.36914 L 391.05469,186.36914 C 392.8203,186.36916 394.16405,186.74416 395.08594,187.49414 C 396.01561,188.23634 396.48045,189.31837 396.48047,190.74023 C 396.48045,191.61525 396.30858,192.34571 395.96484,192.93164 C 395.62108,193.51759 395.10545,193.97071 394.41797,194.29102 C 395.30858,194.6504 395.97264,195.16993 396.41016,195.84961 C 396.85545,196.52149 397.07811,197.36133 397.07813,198.36914 C 397.07811,200.04883 396.53123,201.34571 395.4375,202.25977 C 394.34374,203.17383 392.79296,203.63086 390.78516,203.63086 L 382.92188,203.63086" + id="text5695" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 442.88672,203.63086 L 442.88672,186.36914 L 446.60156,186.36914 L 453.60938,198.22852 L 453.60938,186.36914 L 457.11328,186.36914 L 457.11328,203.63086 L 453.44531,203.63086 L 446.39063,191.77148 L 446.39063,203.63086 L 442.88672,203.63086" + id="text5699" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 501.32813,203.63086 L 501.32813,186.36914 L 506.57813,186.36914 L 510.01172,199.50586 L 513.39844,186.36914 L 518.67188,186.36914 L 518.67188,203.63086 L 515.34375,203.63086 L 515.34375,189.70898 L 511.83984,203.63086 L 508.20703,203.63086 L 504.65625,189.70898 L 504.65625,203.63086 L 501.32813,203.63086" + id="text5703" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 658.22461,134.6543 L 658.22461,131.10352 L 661.77539,131.10352 L 661.77539,134.6543 L 658.22461,134.6543 M 658.22461,143.63086 L 658.22461,140.10352 L 661.77539,140.10352 L 661.77539,143.63086 L 658.22461,143.63086 M 658.24805,164.6543 L 658.24805,161.10352 L 661.77539,161.10352 L 661.77539,164.6543 L 658.24805,164.6543 M 658.24805,177.68555 L 658.24805,176.31445 C 658.90429,176.12695 659.38867,175.83789 659.70117,175.44727 C 660.01367,175.05664 660.16992,174.54883 660.16992,173.92383 L 660.16992,173.63086 L 658.22461,173.63086 L 658.22461,170.10352 L 661.77539,170.10352 L 661.77539,173.49023 C 661.77539,174.66211 661.47851,175.59961 660.88477,176.30273 C 660.29101,177.01367 659.41211,177.47461 658.24805,177.68555" + id="text5725" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 720.78516,126.7793 L 723.03516,126.7793 L 723.03516,133.33008 L 720.78516,133.33008 L 720.78516,126.7793 M 716.96484,126.7793 L 719.21484,126.7793 L 719.21484,133.33008 L 716.96484,133.33008 L 716.96484,126.7793 M 718.88672,156.7793 L 721.13672,156.7793 L 721.13672,163.33008 L 718.88672,163.33008 L 718.88672,156.7793" + id="text5731" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 772.5,140.60938 L 772.5,129.10156 L 780.85156,129.10156 L 780.85156,131.10156 L 774.83594,131.10156 L 774.83594,133.55469 L 780.33594,133.55469 L 780.33594,135.52344 L 774.83594,135.52344 L 774.83594,138.48438 L 781.13281,138.48438 L 781.13281,140.60938 L 772.5,140.60938 M 782.74219,140.60938 L 782.74219,132.11719 L 784.96875,132.11719 L 784.96875,133.125 C 785.28645,132.71355 785.66145,132.40626 786.09375,132.20313 C 786.52604,131.9948 787.00781,131.89063 787.53906,131.89063 C 788.47656,131.89063 789.17708,132.13543 789.64063,132.625 C 790.10937,133.10938 790.34374,133.84115 790.34375,134.82031 L 790.34375,140.60938 L 788.07031,140.60938 L 788.07031,135.47656 C 788.07031,134.86719 787.96614,134.4323 787.75781,134.17188 C 787.55468,133.91147 787.22135,133.78126 786.75781,133.78125 C 786.22135,133.78126 785.79687,133.94271 785.48438,134.26563 C 785.17187,134.58334 785.01562,135.01823 785.01563,135.57031 L 785.01563,140.60938 L 782.74219,140.60938 M 796.07813,140.67188 C 795.86979,140.67708 795.61979,140.6849 795.32813,140.69531 C 795.04166,140.71094 794.85937,140.71875 794.78125,140.71875 C 793.91146,140.71875 793.3151,140.55729 792.99219,140.23438 C 792.67448,139.90625 792.51562,139.26302 792.51563,138.30469 L 792.51563,133.71094 L 791.39063,133.71094 L 791.39063,132.11719 L 792.51563,132.11719 L 792.51563,129.79688 L 794.76563,129.79688 L 794.76563,132.11719 L 796.07813,132.11719 L 796.07813,133.71094 L 794.76563,133.71094 L 794.76563,138.41406 C 794.76562,138.63802 794.8151,138.78646 794.91406,138.85938 C 795.01302,138.92709 795.21614,138.96094 795.52344,138.96094 L 796.07813,138.96094 L 796.07813,140.67188 M 802.63281,138.03125 L 804.89844,138.03125 C 804.66926,138.92709 804.20572,139.63021 803.50781,140.14063 C 802.8151,140.64583 801.96874,140.89844 800.96875,140.89844 C 799.73958,140.89844 798.76562,140.48698 798.04688,139.66406 C 797.32812,138.83594 796.96875,137.71615 796.96875,136.30469 C 796.96875,134.91407 797.32292,133.81772 798.03125,133.01563 C 798.73958,132.21355 799.70833,131.81251 800.9375,131.8125 C 802.23958,131.81251 803.24478,132.20834 803.95313,133 C 804.66145,133.78647 805.01562,134.90886 805.01563,136.36719 C 805.01562,136.52865 805.01301,136.65105 805.00781,136.73438 C 805.0078,136.8125 805.0026,136.88802 804.99219,136.96094 L 799.32031,136.96094 C 799.35156,137.62761 799.51302,138.13021 799.80469,138.46875 C 800.10156,138.80729 800.52604,138.97656 801.07813,138.97656 C 801.46874,138.97656 801.78906,138.90104 802.03906,138.75 C 802.28906,138.59375 802.48697,138.35417 802.63281,138.03125 M 799.32031,135.46875 L 802.66406,135.46875 C 802.64322,134.89584 802.48958,134.46094 802.20313,134.16406 C 801.92187,133.86199 801.51562,133.71094 800.98438,133.71094 C 800.48958,133.71094 800.09895,133.86199 799.8125,134.16406 C 799.53125,134.46615 799.36718,134.90105 799.32031,135.46875 M 806.52344,140.60938 L 806.52344,132.11719 L 808.63281,132.11719 L 808.63281,133.57031 C 808.92968,132.98699 809.27604,132.5599 809.67188,132.28906 C 810.0677,132.01303 810.53906,131.87501 811.08594,131.875 C 811.17447,131.87501 811.24218,131.87761 811.28906,131.88281 C 811.34114,131.88282 811.38281,131.88543 811.41406,131.89063 L 811.42188,134.19531 L 810.66406,134.19531 C 810.04427,134.19532 809.57812,134.35678 809.26563,134.67969 C 808.95312,135.00261 808.79687,135.48178 808.79688,136.11719 L 808.79688,140.60938 L 806.52344,140.60938" + id="text5737" /> + <path + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" + d="M 787.5,172.5 L 787.5,157.5 L 772.5,165 L 787.5,172.5 z " + id="path5745" /> + <path + style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1" + d="M 810,150 L 810,165 L 780,165" + id="path5747" /> + <g + id="g3601"> + <path + id="text5753" + d="M 12.496094,197.64063 L 14.832032,197.64063 C 14.92057,198.27084 15.178382,198.73828 15.605469,199.04297 C 16.032548,199.34766 16.649735,199.5 17.457032,199.5 C 18.144525,199.5 18.662754,199.37761 19.011719,199.13281 C 19.36067,198.88802 19.535149,198.52604 19.535157,198.04688 C 19.535149,197.34896 18.532546,196.77084 16.527344,196.3125 C 16.501298,196.3073 16.47786,196.30209 16.457032,196.29688 C 16.404944,196.28646 16.324215,196.26823 16.214844,196.24219 C 15.141924,196.00782 14.3763,195.7448 13.917969,195.45313 C 13.511717,195.19271 13.201822,194.84245 12.988282,194.40234 C 12.774739,193.96225 12.667968,193.44272 12.667969,192.84375 C 12.667968,191.72397 13.048176,190.8659 13.808594,190.26953 C 14.569008,189.67319 15.667965,189.37501 17.105469,189.375 C 18.449212,189.37501 19.499993,189.69272 20.257813,190.32813 C 21.015616,190.96355 21.415355,191.85938 21.457032,193.01563 L 19.183594,193.01563 C 19.14192,192.45834 18.928379,192.03386 18.542969,191.74219 C 18.157546,191.45053 17.608067,191.3047 16.894532,191.30469 C 16.274735,191.3047 15.796871,191.42579 15.460938,191.66797 C 15.124997,191.91017 14.957028,192.25522 14.957032,192.70313 C 14.957028,193.31251 15.610674,193.76824 16.917969,194.07031 C 17.27213,194.15365 17.548172,194.21876 17.746094,194.26563 C 18.584629,194.47917 19.17968,194.64584 19.53125,194.76563 C 19.882805,194.88542 20.188794,195.01824 20.449219,195.16406 C 20.91796,195.42448 21.269522,195.76954 21.503907,196.19922 C 21.738272,196.62891 21.855459,197.14323 21.855469,197.74219 C 21.855459,198.94011 21.451814,199.86849 20.644532,200.52734 C 19.837232,201.1862 18.699212,201.51562 17.230469,201.51563 C 15.782548,201.51562 14.647133,201.17969 13.824219,200.50781 C 13.001301,199.83594 12.558593,198.88021 12.496094,197.64063 L 12.496094,197.64063 z M 23.566407,201.19531 L 23.566407,189.6875 L 25.824219,189.6875 L 25.824219,193.64063 C 26.131507,193.25522 26.497392,192.96485 26.921875,192.76953 C 27.34635,192.57423 27.82161,192.47657 28.347657,192.47656 C 28.84765,192.47657 29.299473,192.56251 29.703125,192.73438 C 30.106764,192.90626 30.433586,193.15105 30.683594,193.46875 C 30.855461,193.6823 30.976554,193.92709 31.046875,194.20313 C 31.117179,194.47917 31.152335,194.92188 31.152344,195.53125 L 31.152344,195.6875 L 31.152344,201.19531 L 28.894532,201.19531 L 28.894532,196.75 C 28.894525,195.69792 28.798171,195.03777 28.605469,194.76953 C 28.412755,194.50131 28.066401,194.36719 27.566407,194.36719 C 27.029944,194.36719 26.605465,194.52735 26.292969,194.84766 C 25.980466,195.16797 25.824216,195.60417 25.824219,196.15625 L 25.824219,201.19531 L 23.566407,201.19531 z M 33.191407,191.75781 L 33.191407,189.6875 L 35.464844,189.6875 L 35.464844,191.75781 L 33.191407,191.75781 z M 33.191407,201.19531 L 33.191407,192.70313 L 35.464844,192.70313 L 35.464844,201.19531 L 33.191407,201.19531 z M 37.886719,201.19531 L 37.886719,194.29688 L 36.675782,194.29688 L 36.675782,192.70313 L 37.886719,192.70313 L 37.886719,191.91406 C 37.886718,191.12241 38.091144,190.54038 38.5,190.16797 C 38.908852,189.79558 39.553383,189.60939 40.433594,189.60938 C 40.595048,189.60939 40.765621,189.61329 40.945313,189.62109 C 41.124996,189.62892 41.316402,189.64324 41.519532,189.66406 L 41.519532,191.46875 L 40.925782,191.46875 C 40.587236,191.46876 40.36458,191.51303 40.257813,191.60156 C 40.151038,191.69011 40.097653,191.85938 40.097657,192.10938 L 40.097657,192.70313 L 41.519532,192.70313 L 41.519532,194.29688 L 40.113282,194.29688 L 40.113282,201.19531 L 37.886719,201.19531 z M 46.449219,201.25781 C 46.240881,201.26302 45.992183,201.27214 45.703125,201.28516 C 45.414059,201.29818 45.230465,201.30469 45.152344,201.30469 C 44.28255,201.30469 43.687498,201.14193 43.367188,200.81641 C 43.046874,200.49089 42.886718,199.84896 42.886719,198.89063 L 42.886719,194.29688 L 41.761719,194.29688 L 41.761719,192.70313 L 42.886719,192.70313 L 42.886719,190.38281 L 45.136719,190.38281 L 45.136719,192.70313 L 46.449219,192.70313 L 46.449219,194.29688 L 45.136719,194.29688 L 45.136719,199 C 45.136716,199.22396 45.186195,199.3711 45.285157,199.44141 C 45.384111,199.51172 45.587236,199.54688 45.894532,199.54688 L 46.449219,199.54688 L 46.449219,201.25781 z " + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" /> + <path + style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" + d="M 24.746094,207.125 L 13.496094,222.125 L 20.996094,222.125 L 20.996094,229.625 L 28.496094,229.625 L 28.496094,222.125 L 35.996094,222.125 L 24.746094,207.125 z " + id="path5757" /> + </g> + <g + id="g5795" + transform="translate(727.5,0)"> + <text + sodipodi:linespacing="125%" + id="text5797" + y="201.19531" + x="31.8125" + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + xml:space="preserve"><tspan + y="201.19531" + x="31.8125" + id="tspan5799" + sodipodi:role="line">Shift</tspan></text> + <path + id="path5801" + d="M 27.25,207.125 L 16,222.125 L 23.5,222.125 L 23.5,229.625 L 31,229.625 L 31,222.125 L 38.5,222.125 L 27.25,207.125 z " + style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> + </g> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 576.90234,189.63867 L 576.90234,192.20508 L 566.4375,196.48242 L 576.90234,200.74805 L 576.90234,203.31445 L 563.09766,197.63086 L 563.09766,195.29883 L 576.90234,189.63867 M 568.21875,237.68555 L 568.21875,236.31445 C 568.875,236.12695 569.35937,235.83789 569.67188,235.44727 C 569.98437,235.05664 570.14062,234.54883 570.14063,233.92383 L 570.14063,233.63086 L 568.21875,233.63086 L 568.21875,230.10352 L 571.76953,230.10352 L 571.76953,233.49023 C 571.76953,234.6543 571.46875,235.59179 570.86719,236.30273 C 570.27343,237.01367 569.39062,237.47461 568.21875,237.68555" + id="text5803" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 623.09766,189.63867 L 636.90234,195.29883 L 636.90234,197.63086 L 623.09766,203.31445 L 623.09766,200.74805 L 633.58594,196.48242 L 623.09766,192.20508 L 623.09766,189.63867 M 628.21875,233.63086 L 628.21875,230.10352 L 631.74609,230.10352 L 631.74609,233.63086 L 628.21875,233.63086" + id="text5813" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 688.44727,198.61523 C 688.44726,198.5293 688.44335,198.41602 688.43555,198.27539 C 688.42773,198.12696 688.42382,198.01758 688.42383,197.94727 C 688.42382,197.25977 688.49804,196.68946 688.64648,196.23633 C 688.79492,195.7754 689.0332,195.34571 689.36133,194.94727 C 689.61132,194.6504 689.98242,194.31056 690.47461,193.92773 C 690.9746,193.54493 691.29882,193.26759 691.44727,193.0957 C 691.75976,192.74415 691.9746,192.42775 692.0918,192.14648 C 692.20898,191.86525 692.26757,191.55665 692.26758,191.2207 C 692.26757,190.47853 692.06054,189.9004 691.64648,189.48633 C 691.23241,189.07228 690.65429,188.86525 689.91211,188.86523 C 689.16992,188.86525 688.58398,189.11525 688.1543,189.61523 C 687.73242,190.10744 687.50195,190.80275 687.46289,191.70117 L 684.1582,191.70117 L 684.1582,191.33789 C 684.1582,189.68947 684.67773,188.37697 685.7168,187.40039 C 686.76367,186.41603 688.16992,185.92385 689.93555,185.92383 C 691.74023,185.92385 693.17382,186.38869 694.23633,187.31836 C 695.30663,188.24025 695.84178,189.47853 695.8418,191.0332 C 695.84178,191.58009 695.77928,192.07228 695.6543,192.50977 C 695.5371,192.93946 695.3535,193.33399 695.10352,193.69336 C 694.78319,194.14649 694.2871,194.63868 693.61523,195.16992 C 692.95116,195.69337 692.54882,196.01759 692.4082,196.14258 C 692.11132,196.43165 691.89648,196.73634 691.76367,197.05664 C 691.63866,197.37696 691.57616,197.75977 691.57617,198.20508 C 691.57616,198.24415 691.58007,198.31055 691.58789,198.4043 C 691.59569,198.49805 691.5996,198.56836 691.59961,198.61523 L 688.44727,198.61523 M 688.2832,203.63086 L 688.2832,200.19727 L 691.74023,200.19727 L 691.74023,203.63086 L 688.2832,203.63086 M 686.31445,235.85742 L 692.12695,215.92383 L 693.73242,215.92383 L 687.89648,235.85742 L 686.31445,235.85742" + id="text5819" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 18,271.78906 C 17.911447,273.09636 17.406239,274.13542 16.484375,274.90625 C 15.5677,275.67708 14.369784,276.0625 12.890625,276.0625 C 11.187496,276.0625 9.8619761,275.53125 8.9140625,274.46875 C 7.971353,273.40625 7.4999993,271.91667 7.5,270 C 7.4999993,268.04167 7.9817696,266.54168 8.9453125,265.5 C 9.9088511,264.45834 11.294266,263.93751 13.101563,263.9375 C 14.570305,263.93751 15.729158,264.29689 16.578125,265.01563 C 17.432281,265.72918 17.901031,266.73959 17.984375,268.04688 L 15.648438,268.04688 C 15.54947,267.39584 15.283846,266.90105 14.851563,266.5625 C 14.419263,266.21876 13.83593,266.04688 13.101563,266.04688 C 12.059891,266.04688 11.268225,266.38282 10.726563,267.05469 C 10.184892,267.72657 9.9140594,268.70834 9.9140625,270 C 9.9140594,271.25 10.182288,272.21615 10.71875,272.89844 C 11.260412,273.58073 12.028641,273.92188 13.023438,273.92188 C 13.742181,273.92188 14.330722,273.73959 14.789063,273.375 C 15.247387,273.00521 15.544262,272.47657 15.679688,271.78906 L 18,271.78906 M 23.46875,275.80469 C 23.260412,275.8099 23.010412,275.81771 22.71875,275.82813 C 22.432288,275.84375 22.249996,275.85156 22.171875,275.85156 C 21.302081,275.85156 20.705727,275.6901 20.382813,275.36719 C 20.065103,275.03906 19.906249,274.39583 19.90625,273.4375 L 19.90625,268.84375 L 18.78125,268.84375 L 18.78125,267.25 L 19.90625,267.25 L 19.90625,264.92969 L 22.15625,264.92969 L 22.15625,267.25 L 23.46875,267.25 L 23.46875,268.84375 L 22.15625,268.84375 L 22.15625,273.54688 C 22.156247,273.77084 22.205726,273.91927 22.304688,273.99219 C 22.403642,274.0599 22.606767,274.09375 22.914063,274.09375 L 23.46875,274.09375 L 23.46875,275.80469 M 24.789063,275.74219 L 24.789063,267.25 L 26.898438,267.25 L 26.898438,268.70313 C 27.195309,268.1198 27.541663,267.69272 27.9375,267.42188 C 28.333329,267.14584 28.804682,267.00782 29.351563,267.00781 C 29.440099,267.00782 29.507807,267.01043 29.554688,267.01563 C 29.606765,267.01563 29.648432,267.01824 29.679688,267.02344 L 29.6875,269.32813 L 28.929688,269.32813 C 28.309891,269.32813 27.843746,269.48959 27.53125,269.8125 C 27.218747,270.13542 27.062497,270.61459 27.0625,271.25 L 27.0625,275.74219 L 24.789063,275.74219 M 31.023438,275.74219 L 31.023438,264.23438 L 33.296875,264.23438 L 33.296875,275.74219 L 31.023438,275.74219" + id="text5827" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 162.96875,266.49609 L 161.375,271.39453 L 164.57031,271.39453 L 162.96875,266.49609 M 161.59375,264.19141 L 164.32813,264.19141 L 168.47656,275.69922 L 165.99219,275.69922 L 165.21094,273.33203 L 160.75,273.33203 L 159.99219,275.69922 L 157.5,275.69922 L 161.59375,264.19141 M 169.53906,275.69922 L 169.53906,264.19141 L 171.8125,264.19141 L 171.8125,275.69922 L 169.53906,275.69922 M 177.64063,275.76172 C 177.43229,275.76693 177.18229,275.77474 176.89063,275.78516 C 176.60416,275.80078 176.42187,275.80859 176.34375,275.80859 C 175.47396,275.80859 174.8776,275.64714 174.55469,275.32422 C 174.23698,274.99609 174.07812,274.35287 174.07813,273.39453 L 174.07813,268.80078 L 172.95313,268.80078 L 172.95313,267.20703 L 174.07813,267.20703 L 174.07813,264.88672 L 176.32813,264.88672 L 176.32813,267.20703 L 177.64063,267.20703 L 177.64063,268.80078 L 176.32813,268.80078 L 176.32813,273.50391 C 176.32812,273.72787 176.3776,273.8763 176.47656,273.94922 C 176.57552,274.01693 176.77864,274.05078 177.08594,274.05078 L 177.64063,274.05078 L 177.64063,275.76172" + id="text5831" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 612.96875,266.53906 L 611.375,271.4375 L 614.57031,271.4375 L 612.96875,266.53906 M 611.59375,264.23438 L 614.32813,264.23438 L 618.47656,275.74219 L 615.99219,275.74219 L 615.21094,273.375 L 610.75,273.375 L 609.99219,275.74219 L 607.5,275.74219 L 611.59375,264.23438 M 619.53906,275.74219 L 619.53906,264.23438 L 621.8125,264.23438 L 621.8125,275.74219 L 619.53906,275.74219 M 627.64063,275.80469 C 627.43229,275.8099 627.18229,275.81771 626.89063,275.82813 C 626.60416,275.84375 626.42187,275.85156 626.34375,275.85156 C 625.47396,275.85156 624.8776,275.6901 624.55469,275.36719 C 624.23698,275.03906 624.07812,274.39583 624.07813,273.4375 L 624.07813,268.84375 L 622.95313,268.84375 L 622.95313,267.25 L 624.07813,267.25 L 624.07813,264.92969 L 626.32813,264.92969 L 626.32813,267.25 L 627.64063,267.25 L 627.64063,268.84375 L 626.32813,268.84375 L 626.32813,273.54688 C 626.32812,273.77084 626.3776,273.91927 626.47656,273.99219 C 626.57552,274.0599 626.77864,274.09375 627.08594,274.09375 L 627.64063,274.09375 L 627.64063,275.80469 M 642,274.38281 C 641.57291,274.96094 641.08593,275.38542 640.53906,275.65625 C 639.99739,275.92708 639.35937,276.0625 638.625,276.0625 C 637.01562,276.0625 635.71093,275.50521 634.71094,274.39063 C 633.71614,273.27084 633.21875,271.80209 633.21875,269.98438 C 633.21875,268.15105 633.71614,266.6849 634.71094,265.58594 C 635.70573,264.48699 637.03125,263.93751 638.6875,263.9375 C 640.1302,263.93751 641.30728,264.28387 642.21875,264.97656 C 643.1302,265.66407 643.67186,266.61199 643.84375,267.82031 L 641.42969,267.82031 C 641.28385,267.22136 640.98437,266.76563 640.53125,266.45313 C 640.08333,266.14063 639.49739,265.98438 638.77344,265.98438 C 637.80989,265.98438 637.05208,266.33855 636.5,267.04688 C 635.95312,267.75001 635.67968,268.72397 635.67969,269.96875 C 635.67968,271.21875 635.96614,272.19792 636.53906,272.90625 C 637.11197,273.61459 637.89843,273.96875 638.89844,273.96875 C 639.64843,273.96875 640.27603,273.7474 640.78125,273.30469 C 641.28645,272.86198 641.59895,272.25521 641.71875,271.48438 L 639.10938,271.48438 L 639.10938,269.51563 L 643.875,269.51563 L 643.875,275.74219 L 642.28906,275.74219 L 642,274.38281 M 645.96094,275.74219 L 645.96094,267.25 L 648.07031,267.25 L 648.07031,268.70313 C 648.36718,268.1198 648.71354,267.69272 649.10938,267.42188 C 649.5052,267.14584 649.97656,267.00782 650.52344,267.00781 C 650.61197,267.00782 650.67968,267.01043 650.72656,267.01563 C 650.77864,267.01563 650.82031,267.01824 650.85156,267.02344 L 650.85938,269.32813 L 650.10156,269.32813 C 649.48177,269.32813 649.01562,269.48959 648.70313,269.8125 C 648.39062,270.13542 648.23437,270.61459 648.23438,271.25 L 648.23438,275.74219 L 645.96094,275.74219" + id="text5835" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 828,271.78906 C 827.91145,273.09636 827.40624,274.13542 826.48438,274.90625 C 825.5677,275.67708 824.36978,276.0625 822.89063,276.0625 C 821.1875,276.0625 819.86198,275.53125 818.91406,274.46875 C 817.97135,273.40625 817.5,271.91667 817.5,270 C 817.5,268.04167 817.98177,266.54168 818.94531,265.5 C 819.90885,264.45834 821.29427,263.93751 823.10156,263.9375 C 824.5703,263.93751 825.72916,264.29689 826.57813,265.01563 C 827.43228,265.72918 827.90103,266.73959 827.98438,268.04688 L 825.64844,268.04688 C 825.54947,267.39584 825.28385,266.90105 824.85156,266.5625 C 824.41926,266.21876 823.83593,266.04688 823.10156,266.04688 C 822.05989,266.04688 821.26822,266.38282 820.72656,267.05469 C 820.18489,267.72657 819.91406,268.70834 819.91406,270 C 819.91406,271.25 820.18229,272.21615 820.71875,272.89844 C 821.26041,273.58073 822.02864,273.92188 823.02344,273.92188 C 823.74218,273.92188 824.33072,273.73959 824.78906,273.375 C 825.24739,273.00521 825.54426,272.47657 825.67969,271.78906 L 828,271.78906 M 833.46875,275.80469 C 833.26041,275.8099 833.01041,275.81771 832.71875,275.82813 C 832.43229,275.84375 832.25,275.85156 832.17188,275.85156 C 831.30208,275.85156 830.70573,275.6901 830.38281,275.36719 C 830.0651,275.03906 829.90625,274.39583 829.90625,273.4375 L 829.90625,268.84375 L 828.78125,268.84375 L 828.78125,267.25 L 829.90625,267.25 L 829.90625,264.92969 L 832.15625,264.92969 L 832.15625,267.25 L 833.46875,267.25 L 833.46875,268.84375 L 832.15625,268.84375 L 832.15625,273.54688 C 832.15625,273.77084 832.20573,273.91927 832.30469,273.99219 C 832.40364,274.0599 832.60677,274.09375 832.91406,274.09375 L 833.46875,274.09375 L 833.46875,275.80469 M 834.78906,275.74219 L 834.78906,267.25 L 836.89844,267.25 L 836.89844,268.70313 C 837.19531,268.1198 837.54166,267.69272 837.9375,267.42188 C 838.33333,267.14584 838.80468,267.00782 839.35156,267.00781 C 839.4401,267.00782 839.50781,267.01043 839.55469,267.01563 C 839.60677,267.01563 839.64843,267.01824 839.67969,267.02344 L 839.6875,269.32813 L 838.92969,269.32813 C 838.30989,269.32813 837.84375,269.48959 837.53125,269.8125 C 837.21875,270.13542 837.0625,270.61459 837.0625,271.25 L 837.0625,275.74219 L 834.78906,275.74219 M 841.02344,275.74219 L 841.02344,264.23438 L 843.29688,264.23438 L 843.29688,275.74219 L 841.02344,275.74219" + id="text5839" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 108.94531,264.01953 L 105.64844,252.51172 L 108.10156,252.51172 L 110.07031,260.62891 L 111.73438,252.51172 L 114.25781,252.51172 L 115.92188,260.62891 L 117.89063,252.51172 L 120.32031,252.51172 L 117.03125,264.01953 L 114.77344,264.01953 L 112.99219,255.20703 L 111.20313,264.01953 L 108.94531,264.01953 M 121.5,254.58203 L 121.5,252.51172 L 123.77344,252.51172 L 123.77344,254.58203 L 121.5,254.58203 M 121.5,264.01953 L 121.5,255.52734 L 123.77344,255.52734 L 123.77344,264.01953 L 121.5,264.01953 M 125.79688,264.01953 L 125.79688,255.52734 L 128.02344,255.52734 L 128.02344,256.53516 C 128.34114,256.12371 128.71614,255.81641 129.14844,255.61328 C 129.58072,255.40496 130.06249,255.30079 130.59375,255.30078 C 131.53124,255.30079 132.23176,255.54558 132.69531,256.03516 C 133.16405,256.51954 133.39843,257.25131 133.39844,258.23047 L 133.39844,264.01953 L 131.125,264.01953 L 131.125,258.88672 C 131.12499,258.27735 131.02083,257.84245 130.8125,257.58203 C 130.60937,257.32162 130.27604,257.19141 129.8125,257.19141 C 129.27604,257.19141 128.85156,257.35287 128.53906,257.67578 C 128.22656,257.9935 128.07031,258.42839 128.07031,258.98047 L 128.07031,264.01953 L 125.79688,264.01953 M 106.64844,284.01953 L 106.64844,272.51172 L 109.01563,272.51172 L 109.01563,277.23828 L 113.50781,272.51172 L 116.46875,272.51172 L 111.875,277.16797 L 116.88281,284.01953 L 113.99219,284.01953 L 110.24219,278.75391 L 109.01563,279.97266 L 109.01563,284.01953 L 106.64844,284.01953 M 122.9375,281.44141 L 125.20313,281.44141 C 124.97395,282.33724 124.51041,283.04037 123.8125,283.55078 C 123.11979,284.05599 122.27343,284.30859 121.27344,284.30859 C 120.04427,284.30859 119.07031,283.89714 118.35156,283.07422 C 117.63281,282.2461 117.27344,281.1263 117.27344,279.71484 C 117.27344,278.32422 117.6276,277.22787 118.33594,276.42578 C 119.04427,275.62371 120.01302,275.22267 121.24219,275.22266 C 122.54427,275.22267 123.54947,275.6185 124.25781,276.41016 C 124.96614,277.19662 125.3203,278.31902 125.32031,279.77734 C 125.3203,279.93881 125.3177,280.0612 125.3125,280.14453 C 125.31249,280.22266 125.30728,280.29818 125.29688,280.37109 L 119.625,280.37109 C 119.65625,281.03776 119.81771,281.54037 120.10938,281.87891 C 120.40625,282.21745 120.83073,282.38672 121.38281,282.38672 C 121.77343,282.38672 122.09374,282.3112 122.34375,282.16016 C 122.59374,282.00391 122.79166,281.76433 122.9375,281.44141 M 119.625,278.87891 L 122.96875,278.87891 C 122.94791,278.306 122.79426,277.8711 122.50781,277.57422 C 122.22656,277.27214 121.82031,277.1211 121.28906,277.12109 C 120.79427,277.1211 120.40364,277.27214 120.11719,277.57422 C 119.83593,277.87631 119.67187,278.3112 119.625,278.87891 M 127.16406,287.42578 L 127.16406,285.58984 C 127.23698,285.60026 127.3125,285.60807 127.39063,285.61328 C 127.46875,285.61849 127.57031,285.62109 127.69531,285.62109 C 128.14323,285.62109 128.47916,285.51432 128.70313,285.30078 C 128.92708,285.09245 129.03906,284.77734 129.03906,284.35547 C 129.03906,284.32422 129.03385,284.28516 129.02344,284.23828 C 129.01302,284.19141 129.0026,284.15234 128.99219,284.12109 L 125.92969,275.52734 L 128.42969,275.52734 L 130.21875,281.65234 L 131.96094,275.52734 L 134.35156,275.52734 L 130.85938,285.54297 C 130.59895,286.29297 130.27343,286.80338 129.88281,287.07422 C 129.49218,287.35026 128.90625,287.48828 128.125,287.48828 C 127.98437,287.48828 127.83333,287.48307 127.67188,287.47266 C 127.51041,287.46224 127.34114,287.44661 127.16406,287.42578" + id="text5872" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 708.94531,264.01953 L 705.64844,252.51172 L 708.10156,252.51172 L 710.07031,260.62891 L 711.73438,252.51172 L 714.25781,252.51172 L 715.92188,260.62891 L 717.89063,252.51172 L 720.32031,252.51172 L 717.03125,264.01953 L 714.77344,264.01953 L 712.99219,255.20703 L 711.20313,264.01953 L 708.94531,264.01953 M 721.5,254.58203 L 721.5,252.51172 L 723.77344,252.51172 L 723.77344,254.58203 L 721.5,254.58203 M 721.5,264.01953 L 721.5,255.52734 L 723.77344,255.52734 L 723.77344,264.01953 L 721.5,264.01953 M 725.79688,264.01953 L 725.79688,255.52734 L 728.02344,255.52734 L 728.02344,256.53516 C 728.34114,256.12371 728.71614,255.81641 729.14844,255.61328 C 729.58072,255.40496 730.06249,255.30079 730.59375,255.30078 C 731.53124,255.30079 732.23176,255.54558 732.69531,256.03516 C 733.16405,256.51954 733.39843,257.25131 733.39844,258.23047 L 733.39844,264.01953 L 731.125,264.01953 L 731.125,258.88672 C 731.12499,258.27735 731.02083,257.84245 730.8125,257.58203 C 730.60937,257.32162 730.27604,257.19141 729.8125,257.19141 C 729.27604,257.19141 728.85156,257.35287 728.53906,257.67578 C 728.22656,257.9935 728.07031,258.42839 728.07031,258.98047 L 728.07031,264.01953 L 725.79688,264.01953 M 706.64844,284.01953 L 706.64844,272.51172 L 709.01563,272.51172 L 709.01563,277.23828 L 713.50781,272.51172 L 716.46875,272.51172 L 711.875,277.16797 L 716.88281,284.01953 L 713.99219,284.01953 L 710.24219,278.75391 L 709.01563,279.97266 L 709.01563,284.01953 L 706.64844,284.01953 M 722.9375,281.44141 L 725.20313,281.44141 C 724.97395,282.33724 724.51041,283.04037 723.8125,283.55078 C 723.11979,284.05599 722.27343,284.30859 721.27344,284.30859 C 720.04427,284.30859 719.07031,283.89714 718.35156,283.07422 C 717.63281,282.2461 717.27344,281.1263 717.27344,279.71484 C 717.27344,278.32422 717.6276,277.22787 718.33594,276.42578 C 719.04427,275.62371 720.01302,275.22267 721.24219,275.22266 C 722.54427,275.22267 723.54947,275.6185 724.25781,276.41016 C 724.96614,277.19662 725.3203,278.31902 725.32031,279.77734 C 725.3203,279.93881 725.3177,280.0612 725.3125,280.14453 C 725.31249,280.22266 725.30728,280.29818 725.29688,280.37109 L 719.625,280.37109 C 719.65625,281.03776 719.81771,281.54037 720.10938,281.87891 C 720.40625,282.21745 720.83073,282.38672 721.38281,282.38672 C 721.77343,282.38672 722.09374,282.3112 722.34375,282.16016 C 722.59374,282.00391 722.79166,281.76433 722.9375,281.44141 M 719.625,278.87891 L 722.96875,278.87891 C 722.94791,278.306 722.79426,277.8711 722.50781,277.57422 C 722.22656,277.27214 721.82031,277.1211 721.28906,277.12109 C 720.79427,277.1211 720.40364,277.27214 720.11719,277.57422 C 719.83593,277.87631 719.67187,278.3112 719.625,278.87891 M 727.16406,287.42578 L 727.16406,285.58984 C 727.23698,285.60026 727.3125,285.60807 727.39063,285.61328 C 727.46875,285.61849 727.57031,285.62109 727.69531,285.62109 C 728.14323,285.62109 728.47916,285.51432 728.70313,285.30078 C 728.92708,285.09245 729.03906,284.77734 729.03906,284.35547 C 729.03906,284.32422 729.03385,284.28516 729.02344,284.23828 C 729.01302,284.19141 729.0026,284.15234 728.99219,284.12109 L 725.92969,275.52734 L 728.42969,275.52734 L 730.21875,281.65234 L 731.96094,275.52734 L 734.35156,275.52734 L 730.85938,285.54297 C 730.59895,286.29297 730.27343,286.80338 729.88281,287.07422 C 729.49218,287.35026 728.90625,287.48828 728.125,287.48828 C 727.98437,287.48828 727.83333,287.48307 727.67188,287.47266 C 727.51041,287.46224 727.34114,287.44661 727.16406,287.42578" + id="text5878" /> + <path + style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 759.98438,275.60938 L 759.98438,264.10156 L 763.48438,264.10156 L 765.77344,272.85938 L 768.03125,264.10156 L 771.54688,264.10156 L 771.54688,275.60938 L 769.32813,275.60938 L 769.32813,266.32813 L 766.99219,275.60938 L 764.57031,275.60938 L 762.20313,266.32813 L 762.20313,275.60938 L 759.98438,275.60938 M 778.99219,273.03125 L 781.25781,273.03125 C 781.02864,273.92709 780.5651,274.63021 779.86719,275.14063 C 779.17447,275.64583 778.32812,275.89844 777.32813,275.89844 C 776.09896,275.89844 775.125,275.48698 774.40625,274.66406 C 773.6875,273.83594 773.32812,272.71615 773.32813,271.30469 C 773.32812,269.91407 773.68229,268.81772 774.39063,268.01563 C 775.09896,267.21355 776.06771,266.81251 777.29688,266.8125 C 778.59895,266.81251 779.60416,267.20834 780.3125,268 C 781.02083,268.78647 781.37499,269.90886 781.375,271.36719 C 781.37499,271.52865 781.37239,271.65105 781.36719,271.73438 C 781.36718,271.8125 781.36197,271.88802 781.35156,271.96094 L 775.67969,271.96094 C 775.71093,272.62761 775.87239,273.13021 776.16406,273.46875 C 776.46093,273.80729 776.88541,273.97656 777.4375,273.97656 C 777.82812,273.97656 778.14843,273.90104 778.39844,273.75 C 778.64843,273.59375 778.84635,273.35417 778.99219,273.03125 M 775.67969,270.46875 L 779.02344,270.46875 C 779.0026,269.89584 778.84895,269.46094 778.5625,269.16406 C 778.28124,268.86199 777.87499,268.71094 777.34375,268.71094 C 776.84895,268.71094 776.45833,268.86199 776.17188,269.16406 C 775.89062,269.46615 775.72656,269.90105 775.67969,270.46875 M 782.88281,275.60938 L 782.88281,267.11719 L 785.10938,267.11719 L 785.10938,268.125 C 785.42708,267.71355 785.80208,267.40626 786.23438,267.20313 C 786.66666,266.9948 787.14843,266.89063 787.67969,266.89063 C 788.61718,266.89063 789.3177,267.13543 789.78125,267.625 C 790.24999,268.10938 790.48437,268.84115 790.48438,269.82031 L 790.48438,275.60938 L 788.21094,275.60938 L 788.21094,270.47656 C 788.21093,269.86719 788.10676,269.4323 787.89844,269.17188 C 787.69531,268.91147 787.36197,268.78126 786.89844,268.78125 C 786.36197,268.78126 785.9375,268.94272 785.625,269.26563 C 785.3125,269.58334 785.15625,270.01823 785.15625,270.57031 L 785.15625,275.60938 L 782.88281,275.60938 M 800.01563,267.11719 L 800.01563,275.60938 L 797.78906,275.60938 L 797.78906,274.60156 C 797.46614,275.01302 797.08854,275.32292 796.65625,275.53125 C 796.22916,275.73437 795.74739,275.83594 795.21094,275.83594 C 794.27864,275.83594 793.57812,275.59115 793.10938,275.10156 C 792.64583,274.61198 792.41406,273.88021 792.41406,272.90625 L 792.41406,267.11719 L 794.6875,267.11719 L 794.6875,272.25 C 794.6875,272.85417 794.78906,273.28646 794.99219,273.54688 C 795.19531,273.80209 795.53125,273.92969 796,273.92969 C 796.53124,273.92969 796.95312,273.77084 797.26563,273.45313 C 797.58333,273.13021 797.74218,272.69271 797.74219,272.14063 L 797.74219,267.11719 L 800.01563,267.11719" + id="text5884" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 104.41406,17.103516 L 104.41406,10.212891 L 101.74219,10.212891 L 101.74219,8.7949219 L 101.94141,8.7949219 C 102.89453,8.7949367 103.58984,8.6621243 104.02734,8.3964844 C 104.47265,8.1308749 104.73828,7.6894691 104.82422,7.0722656 L 106.59375,7.0722656 L 106.59375,17.103516 L 104.41406,17.103516 M 106.72266,36.369141 L 106.72266,39.826172 L 103.24219,39.826172 L 103.24219,36.369141 L 106.72266,36.369141 M 105.89063,41.173828 L 106.80469,48.978516 L 106.80469,53.630859 L 103.19531,53.630859 L 103.19531,48.978516 L 104.10938,41.173828 L 105.89063,41.173828" + id="text5890" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 160.85156,47.103516 C 160.875,46.197273 161.08984,45.431649 161.49609,44.806641 C 161.91015,44.18165 162.63672,43.548838 163.67578,42.908203 C 163.82422,42.822276 164.03125,42.701183 164.29688,42.544922 C 165.74218,41.724621 166.46484,40.931653 166.46484,40.166016 C 166.46484,39.720717 166.32031,39.369155 166.03125,39.111328 C 165.74218,38.85353 165.34375,38.724624 164.83594,38.724609 C 164.27343,38.724624 163.83984,38.88478 163.53516,39.205078 C 163.23047,39.517592 163.07812,39.966811 163.07813,40.552734 L 163.07813,40.646484 L 161.03906,40.646484 C 161.03906,39.498061 161.37891,38.615249 162.05859,37.998047 C 162.73828,37.380876 163.71093,37.072282 164.97656,37.072266 C 166.11718,37.072282 167.02343,37.353532 167.69531,37.916016 C 168.37499,38.470718 168.71484,39.212905 168.71484,40.142578 C 168.71484,40.814466 168.53905,41.39259 168.1875,41.876953 C 167.83593,42.361339 167.14843,42.919933 166.125,43.552734 C 165.89843,43.701182 165.57812,43.896494 165.16406,44.138672 C 164.22656,44.685556 163.69922,45.115243 163.58203,45.427734 L 168.62109,45.427734 L 168.62109,47.103516 L 160.85156,47.103516" + id="text5910" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 220.92188,44.033203 L 223.05469,44.033203 C 223.07031,44.603525 223.22265,45.029305 223.51172,45.310547 C 223.80078,45.591805 224.23437,45.73243 224.8125,45.732422 C 225.36718,45.73243 225.79687,45.599617 226.10156,45.333984 C 226.40624,45.068368 226.55859,44.689462 226.55859,44.197266 C 226.55859,43.697276 226.38281,43.322276 226.03125,43.072266 C 225.67968,42.814464 225.15234,42.685558 224.44922,42.685547 L 224.10938,42.685547 L 224.10938,41.291016 L 224.35547,41.291016 C 225.0039,41.291028 225.48046,41.181653 225.78516,40.962891 C 226.09765,40.736341 226.2539,40.392591 226.25391,39.931641 C 226.2539,39.54103 226.12109,39.232436 225.85547,39.005859 C 225.58984,38.771499 225.23437,38.654312 224.78906,38.654297 C 224.29687,38.654312 223.91797,38.787124 223.65234,39.052734 C 223.38672,39.310561 223.2539,39.681655 223.25391,40.166016 L 223.25391,40.236328 L 221.16797,40.236328 C 221.19141,39.212905 221.51953,38.431656 222.15234,37.892578 C 222.79297,37.345719 223.70312,37.072282 224.88281,37.072266 C 225.99218,37.072282 226.86718,37.314469 227.50781,37.798828 C 228.15624,38.283218 228.48046,38.943374 228.48047,39.779297 C 228.48046,40.21681 228.36718,40.603529 228.14063,40.939453 C 227.92187,41.26759 227.59374,41.537121 227.15625,41.748047 C 227.72656,41.974621 228.15624,42.291027 228.44531,42.697266 C 228.74218,43.095714 228.89062,43.564463 228.89063,44.103516 C 228.89062,45.119149 228.52343,45.923836 227.78906,46.517578 C 227.06249,47.103522 226.07031,47.396491 224.8125,47.396484 C 223.57031,47.396491 222.60937,47.107428 221.92969,46.529297 C 221.25781,45.95118 220.92187,45.134774 220.92188,44.080078 L 220.92188,44.033203" + id="text5922" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 278.92969,21.685547 C 279.86719,21.037112 280.53125,20.439456 280.92188,19.892578 C 281.32031,19.345707 281.51953,18.75977 281.51953,18.134766 C 281.51953,17.837896 281.47265,17.525397 281.37891,17.197266 C 281.28515,16.861335 281.14843,16.509773 280.96875,16.142578 L 278.90625,16.142578 L 278.90625,14.841797 L 280.17188,14.841797 C 279.82812,14.162119 279.57812,13.556651 279.42188,13.025391 C 279.26562,12.494152 279.1875,11.998059 279.1875,11.537109 C 279.1875,10.146498 279.69531,9.021499 280.71094,8.1621094 C 281.73437,7.3027507 283.08203,6.8730636 284.75391,6.8730469 C 286.5664,6.8730636 287.98827,7.3379069 289.01953,8.2675781 C 290.05077,9.1972801 290.61327,10.517591 290.70703,12.228516 L 287.47266,12.228516 C 287.41015,11.345715 287.15624,10.669935 286.71094,10.201172 C 286.26562,9.7324358 285.65624,9.498061 284.88281,9.4980469 C 284.14843,9.498061 283.58203,9.6894671 283.18359,10.072266 C 282.79296,10.455091 282.59765,11.005872 282.59766,11.724609 C 282.59765,12.138683 282.84375,12.888683 283.33594,13.974609 C 283.50781,14.349619 283.63671,14.638681 283.72266,14.841797 L 287.0625,14.841797 L 287.0625,16.142578 L 284.20313,16.142578 C 284.27343,16.43946 284.32421,16.712898 284.35547,16.962891 C 284.38671,17.212897 284.40234,17.443366 284.40234,17.654297 C 284.40234,18.216802 284.22656,18.779302 283.875,19.341797 C 283.53124,19.896488 282.94531,20.548831 282.11719,21.298828 C 282.625,21.064456 283.08203,20.892581 283.48828,20.783203 C 283.90234,20.666019 284.27734,20.607425 284.61328,20.607422 C 285.01952,20.607425 285.57421,20.701175 286.27734,20.888672 C 286.98046,21.068362 287.48046,21.158206 287.77734,21.158203 C 288.16796,21.158206 288.55077,21.095706 288.92578,20.970703 C 289.30858,20.845706 289.68749,20.6543 290.0625,20.396484 L 291.09375,22.939453 C 290.4453,23.322266 289.82421,23.611328 289.23047,23.806641 C 288.63671,24.009765 288.08202,24.111328 287.56641,24.111328 C 286.97265,24.111328 286.16796,23.955078 285.15234,23.642578 C 284.14453,23.330078 283.41406,23.173829 282.96094,23.173828 C 282.48437,23.173829 282.01953,23.251954 281.56641,23.408203 C 281.12109,23.564453 280.6875,23.798828 280.26563,24.111328 L 278.92969,21.685547 M 284.94141,40.025391 C 284.05859,40.025404 283.29687,40.345716 282.65625,40.986328 C 282.01562,41.626965 281.69531,42.384777 281.69531,43.259766 C 281.69531,44.1504 282.01171,44.912118 282.64453,45.544922 C 283.27734,46.169929 284.04296,46.482429 284.94141,46.482422 C 285.82421,46.482429 286.58202,46.169929 287.21484,45.544922 C 287.85546,44.912118 288.17577,44.1504 288.17578,43.259766 C 288.17577,42.384777 287.85546,41.626965 287.21484,40.986328 C 286.58202,40.345716 285.82421,40.025404 284.94141,40.025391 M 279.65625,36.779297 L 282.05859,39.158203 C 282.48046,38.85353 282.92578,38.626968 283.39453,38.478516 C 283.86328,38.322281 284.37109,38.244156 284.91797,38.244141 C 285.46484,38.244156 285.97655,38.322281 286.45313,38.478516 C 286.93749,38.626968 287.39062,38.85353 287.8125,39.158203 L 290.19141,36.779297 L 291.42188,38.033203 L 289.04297,40.435547 C 289.33983,40.849622 289.56249,41.294934 289.71094,41.771484 C 289.85936,42.240246 289.93358,42.736339 289.93359,43.259766 C 289.93358,43.783213 289.85936,44.279306 289.71094,44.748047 C 289.56249,45.216805 289.33983,45.666024 289.04297,46.095703 L 291.42188,48.498047 L 290.19141,49.716797 L 287.8125,47.337891 C 287.39062,47.650397 286.9414,47.880865 286.46484,48.029297 C 285.98827,48.17774 285.48046,48.251959 284.94141,48.251953 C 284.3789,48.251959 283.85937,48.17774 283.38281,48.029297 C 282.91406,47.880865 282.47265,47.650397 282.05859,47.337891 L 279.65625,49.716797 L 278.4375,48.498047 L 280.80469,46.095703 C 280.50781,45.673836 280.28515,45.23243 280.13672,44.771484 C 279.99609,44.302744 279.92578,43.798838 279.92578,43.259766 C 279.92578,42.736339 279.99609,42.240246 280.13672,41.771484 C 280.28515,41.294934 280.50781,40.849622 280.80469,40.435547 L 278.4375,38.033203 L 279.65625,36.779297" + id="text5928" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 352.875,47.701172 C 352.74217,49.662113 351.98436,51.220706 350.60156,52.376953 C 349.22655,53.533203 347.42968,54.111328 345.21094,54.111328 C 342.65624,54.111328 340.66796,53.314453 339.24609,51.720703 C 337.83203,50.126957 337.125,47.892584 337.125,45.017578 C 337.125,42.08009 337.84765,39.830092 339.29297,38.267578 C 340.73828,36.705095 342.8164,35.923846 345.52734,35.923828 C 347.73046,35.923846 349.46874,36.462908 350.74219,37.541016 C 352.02342,38.611343 352.72655,40.126967 352.85156,42.087891 L 349.34766,42.087891 C 349.19921,41.111341 348.80077,40.369154 348.15234,39.861328 C 347.50389,39.345717 346.6289,39.087905 345.52734,39.087891 C 343.96484,39.087905 342.77734,39.591811 341.96484,40.599609 C 341.15234,41.607434 340.74609,43.080089 340.74609,45.017578 C 340.74609,46.892585 341.14843,48.341802 341.95313,49.365234 C 342.76562,50.388675 343.91796,50.900393 345.41016,50.900391 C 346.48827,50.900393 347.37108,50.626956 348.05859,50.080078 C 348.74608,49.525395 349.19139,48.732427 349.39453,47.701172 L 352.875,47.701172" + id="text5946" /> + <path + transform="matrix(1.16233,0,-0.444745,0.860341,0,0)" + style="font-size:16.72912407px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 307.52845,53.268758 L 317.31434,53.268758 L 317.31434,54.894293 L 307.52845,54.894293 L 307.52845,53.268758 M 307.52845,49.756296 L 317.31434,49.756296 L 317.31434,51.381831 L 307.52845,51.381831 L 307.52845,49.756296" + id="text5956" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 411.45117,50.150391 L 411.45117,46.142578 L 408.63867,50.150391 L 411.45117,50.150391 M 411.45117,53.630859 L 411.45117,51.591797 L 406.98633,51.591797 L 406.98633,49.962891 L 410.90039,44.513672 L 413.51367,44.513672 L 413.51367,50.103516 L 414.73242,50.103516 L 414.73242,51.591797 L 413.51367,51.591797 L 413.51367,53.630859 L 411.45117,53.630859 M 398.58398,54.111328 L 408.7793,36.615234 L 410.70117,36.615234 L 400.48242,54.111328 L 398.58398,54.111328 M 397.78711,46.458984 L 397.78711,40.025391 L 395.26758,40.025391 L 395.26758,38.701172 L 395.44336,38.701172 C 396.36523,38.701187 397.0332,38.576187 397.44727,38.326172 C 397.86914,38.076187 398.11914,37.658219 398.19727,37.072266 L 399.88477,37.072266 L 399.88477,46.458984 L 397.78711,46.458984" + id="text5960" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 467.0918,53.630859 C 467.11522,52.779298 467.32225,52.064455 467.71289,51.486328 C 468.11131,50.900393 468.80663,50.31055 469.79883,49.716797 C 469.95506,49.630863 470.16991,49.50977 470.44336,49.353516 C 471.7949,48.595708 472.47068,47.861334 472.4707,47.150391 C 472.47068,46.736335 472.33006,46.40821 472.04883,46.166016 C 471.76756,45.923836 471.38475,45.802742 470.90039,45.802734 C 470.36912,45.802742 469.95506,45.95118 469.6582,46.248047 C 469.36913,46.544929 469.22459,46.966804 469.22461,47.513672 L 469.22461,47.607422 L 467.2793,47.607422 C 467.27928,46.529304 467.6035,45.70118 468.25195,45.123047 C 468.90038,44.537118 469.82616,44.24415 471.0293,44.244141 C 472.12303,44.24415 472.99412,44.505868 473.64258,45.029297 C 474.29881,45.552742 474.62693,46.251961 474.62695,47.126953 C 474.62693,47.751959 474.45506,48.294927 474.11133,48.755859 C 473.77537,49.208989 473.11522,49.72852 472.13086,50.314453 C 471.9199,50.439456 471.63084,50.607425 471.26367,50.818359 C 470.34959,51.341799 469.83397,51.744143 469.7168,52.025391 L 474.50977,52.025391 L 474.50977,53.630859 L 467.0918,53.630859 M 458.68945,54.111328 L 468.88477,36.615234 L 470.80664,36.615234 L 460.58789,54.111328 L 458.68945,54.111328 M 457.89258,46.458984 L 457.89258,40.025391 L 455.37305,40.025391 L 455.37305,38.701172 L 455.54883,38.701172 C 456.4707,38.701187 457.13867,38.576187 457.55273,38.326172 C 457.97461,38.076187 458.22461,37.658219 458.30273,37.072266 L 459.99023,37.072266 L 459.99023,46.458984 L 457.89258,46.458984" + id="text5967" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 531.83203,50.150391 L 531.83203,46.142578 L 529.01953,50.150391 L 531.83203,50.150391 M 531.83203,53.630859 L 531.83203,51.591797 L 527.36719,51.591797 L 527.36719,49.962891 L 531.28125,44.513672 L 533.89453,44.513672 L 533.89453,50.103516 L 535.11328,50.103516 L 535.11328,51.591797 L 533.89453,51.591797 L 533.89453,53.630859 L 531.83203,53.630859 M 518.96484,54.111328 L 529.16016,36.615234 L 531.08203,36.615234 L 520.86328,54.111328 L 518.96484,54.111328 M 514.88672,43.599609 L 516.89063,43.599609 C 516.91406,44.130869 517.0625,44.529306 517.33594,44.794922 C 517.61718,45.052743 518.03125,45.181649 518.57813,45.181641 C 519.10937,45.181649 519.51953,45.060555 519.80859,44.818359 C 520.09765,44.568368 520.24218,44.208994 520.24219,43.740234 C 520.24218,43.271495 520.07421,42.919933 519.73828,42.685547 C 519.40234,42.443371 518.90625,42.322277 518.25,42.322266 C 518.20312,42.322277 518.14453,42.326183 518.07422,42.333984 C 518.0039,42.341808 517.94922,42.345714 517.91016,42.345703 L 517.91016,41.033203 L 518.14453,41.033203 C 518.76171,41.033216 519.21484,40.931653 519.50391,40.728516 C 519.80078,40.517591 519.94921,40.193373 519.94922,39.755859 C 519.94921,39.388686 519.82421,39.099624 519.57422,38.888672 C 519.32421,38.669937 518.98437,38.560562 518.55469,38.560547 C 518.08593,38.560562 517.72265,38.685562 517.46484,38.935547 C 517.21484,39.177749 517.08984,39.525405 517.08984,39.978516 L 517.08984,40.048828 L 515.08594,40.048828 C 515.10156,39.087905 515.41797,38.353531 516.03516,37.845703 C 516.65234,37.330094 517.52343,37.072282 518.64844,37.072266 C 519.70312,37.072282 520.53906,37.302751 521.15625,37.763672 C 521.77343,38.216812 522.08202,38.833999 522.08203,39.615234 C 522.08202,40.02931 521.97655,40.392591 521.76563,40.705078 C 521.55468,41.009778 521.23827,41.263684 520.81641,41.466797 C 521.36327,41.677746 521.77343,41.970715 522.04688,42.345703 C 522.32812,42.712902 522.46874,43.154307 522.46875,43.669922 C 522.46874,44.607431 522.11718,45.349618 521.41406,45.896484 C 520.71874,46.443367 519.77343,46.716804 518.57813,46.716797 C 517.39062,46.716804 516.47656,46.451179 515.83594,45.919922 C 515.20312,45.380868 514.88672,44.615243 514.88672,43.623047 L 514.88672,43.599609" + id="text5973" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 586.63477,39.404297 L 586.63477,42.498047 L 583.36523,42.498047 L 583.36523,39.474609 C 583.36523,38.482437 583.66992,37.654313 584.2793,36.990234 C 584.88867,36.326189 585.67382,35.970721 586.63477,35.923828 L 586.63477,37.119141 C 586.04101,37.259782 585.59961,37.509782 585.31055,37.869141 C 585.02148,38.220719 584.87695,38.681656 584.87695,39.251953 L 584.87695,39.404297 L 586.63477,39.404297" + id="text5979" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 643.36523,39.474609 L 643.36523,36.369141 L 646.63477,36.369141 L 646.63477,39.427734 C 646.63476,40.412123 646.33007,41.240247 645.7207,41.912109 C 645.11132,42.576183 644.32617,42.931651 643.36523,42.978516 L 643.36523,41.771484 C 643.95898,41.630871 644.39648,41.384778 644.67773,41.033203 C 644.96679,40.673841 645.11132,40.201185 645.11133,39.615234 L 645.11133,39.474609 L 643.36523,39.474609" + id="text5985" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 706.89258,53.630859 L 703.50586,53.630859 L 703.50586,47.560547 L 703.27148,47.150391 L 698.00977,47.150391 L 698.00977,45.826172 L 702.49805,45.826172 L 701.64258,44.337891 L 698.00977,44.337891 L 698.00977,43.025391 L 700.86914,43.025391 L 697.61133,37.330078 L 701.41992,37.330078 L 705.19336,44.724609 L 708.69727,37.330078 L 712.27148,37.330078 L 709.27148,43.025391 L 712.00195,43.025391 L 712.00195,44.337891 L 708.58008,44.337891 L 707.7832,45.826172 L 712.00195,45.826172 L 712.00195,47.150391 L 707.0918,47.150391 L 706.89258,47.560547 L 706.89258,53.630859" + id="text5991" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 764.97656,19.306641 C 765.46093,19.306645 765.8789,19.482426 766.23047,19.833984 C 766.58202,20.18555 766.7578,20.603519 766.75781,21.087891 C 766.7578,21.564455 766.58202,21.974611 766.23047,22.318359 C 765.8789,22.66211 765.46093,22.833985 764.97656,22.833984 C 764.48437,22.833985 764.06249,22.666017 763.71094,22.330078 C 763.36718,21.994142 763.1953,21.58008 763.19531,21.087891 C 763.1953,20.595706 763.36718,20.177738 763.71094,19.833984 C 764.06249,19.482426 764.48437,19.306645 764.97656,19.306641 M 757.94531,15.298828 L 771.98438,15.298828 L 771.98438,17.630859 L 757.94531,17.630859 L 757.94531,15.298828 M 764.97656,10.095703 C 765.46093,10.095717 765.8789,10.271498 766.23047,10.623047 C 766.58202,10.96681 766.7578,11.380872 766.75781,11.865234 C 766.7578,12.357433 766.58202,12.779308 766.23047,13.130859 C 765.88671,13.47462 765.46874,13.646494 764.97656,13.646484 C 764.48437,13.646494 764.06249,13.47462 763.71094,13.130859 C 763.36718,12.779308 763.1953,12.357433 763.19531,11.865234 C 763.1953,11.373059 763.36718,10.955091 763.71094,10.611328 C 764.06249,10.267591 764.48437,10.095717 764.97656,10.095703 M 759.84375,39.544922 L 765.11719,44.818359 L 770.40234,39.544922 L 772.05469,41.173828 L 766.78125,46.482422 L 772.05469,51.755859 L 770.40234,53.396484 L 765.11719,48.111328 L 759.84375,53.396484 L 758.20313,51.755859 L 763.48828,46.482422 L 758.20313,41.173828 L 759.84375,39.544922" + id="text5997" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 134.9707,69.826172 L 132.58008,77.173828 L 137.37305,77.173828 L 134.9707,69.826172 M 132.9082,66.369141 L 137.00977,66.369141 L 143.23242,83.630859 L 139.50586,83.630859 L 138.33398,80.080078 L 131.64258,80.080078 L 130.50586,83.630859 L 126.76758,83.630859 L 132.9082,66.369141 M 135.70898,64.166016 L 135.70898,61.283203 L 138.35742,61.283203 L 138.35742,64.166016 L 135.70898,64.166016 M 131.63086,64.166016 L 131.63086,61.283203 L 134.2793,61.283203 L 134.2793,64.166016 L 131.63086,64.166016" + id="text6003" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 194.9707,62.126953 C 194.5957,62.126975 194.27538,62.267599 194.00977,62.548828 C 193.74413,62.822286 193.61132,63.154317 193.61133,63.544922 C 193.61132,63.927754 193.74023,64.251973 193.99805,64.517578 C 194.26366,64.783222 194.58788,64.916034 194.9707,64.916016 C 195.36132,64.916034 195.69335,64.783222 195.9668,64.517578 C 196.24804,64.24416 196.38866,63.919942 196.38867,63.544922 C 196.38866,63.16213 196.24804,62.830099 195.9668,62.548828 C 195.69335,62.267599 195.36132,62.126975 194.9707,62.126953 M 194.9707,60.521484 C 195.81444,60.521507 196.52929,60.814476 197.11523,61.400391 C 197.70116,61.978537 197.99413,62.685568 197.99414,63.521484 C 197.99413,64.357441 197.70116,65.068378 197.11523,65.654297 C 196.52929,66.232439 195.81444,66.521501 194.9707,66.521484 C 194.13476,66.521501 193.42773,66.232439 192.84961,65.654297 C 192.27929,65.07619 191.99414,64.365254 191.99414,63.521484 C 191.99414,62.677755 192.27929,61.966819 192.84961,61.388672 C 193.42773,60.81057 194.13476,60.521507 194.9707,60.521484 M 192.7207,67.072266 L 197.23242,67.072266 L 203.23242,83.630859 L 199.50586,83.630859 L 198.33398,80.080078 L 191.64258,80.080078 L 190.50586,83.630859 L 186.76758,83.630859 L 192.7207,67.072266 M 194.9707,69.826172 L 192.58008,77.173828 L 197.37305,77.173828 L 194.9707,69.826172" + id="text6007" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 248.52539,83.630859 L 248.52539,66.369141 L 261.05273,66.369141 L 261.05273,69.369141 L 252.0293,69.369141 L 252.0293,73.048828 L 260.2793,73.048828 L 260.2793,76.001953 L 252.0293,76.001953 L 252.0293,80.443359 L 261.47461,80.443359 L 261.47461,83.630859 L 248.52539,83.630859 M 258.24023,60.521484 L 254.57227,64.857422 L 252.9082,64.857422 L 255.2168,60.521484 L 258.24023,60.521484" + id="text6011" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 313.72266,101.49056 L 313.72266,104.29134 L 314.88281,104.29134 C 315.5703,104.29135 316.07421,104.18198 316.39453,103.96322 C 316.71483,103.74448 316.87499,103.40073 316.875,102.93197 C 316.87499,102.43979 316.70311,102.07651 316.35938,101.84212 C 316.01561,101.60776 315.48436,101.49057 314.76563,101.49056 L 313.72266,101.49056 M 311.37891,100.00228 L 315.16406,100.00228 C 316.53905,100.00229 317.5703,100.23667 318.25781,100.70541 C 318.95311,101.16636 319.30077,101.85776 319.30078,102.77962 C 319.30077,103.42026 319.11327,103.96713 318.73828,104.42025 C 318.36327,104.87338 317.84374,105.18198 317.17969,105.34603 L 319.34766,109.67025 L 316.72266,109.67025 L 314.88281,105.70931 L 313.72266,105.70931 L 313.72266,109.67025 L 311.37891,109.67025 L 311.37891,100.00228 M 315,97.717125 C 314.0078,97.717141 313.08593,97.892922 312.23438,98.244469 C 311.38281,98.588234 310.61718,99.099952 309.9375,99.779625 C 309.22656,100.49058 308.67968,101.29917 308.29688,102.20541 C 307.91406,103.10385 307.72265,104.03354 307.72266,104.99447 C 307.72265,105.96323 307.90234,106.8851 308.26172,107.76009 C 308.62109,108.62729 309.14062,109.40072 309.82031,110.08041 C 310.51562,110.79135 311.30859,111.33822 312.19922,111.72103 C 313.08984,112.09603 314.01562,112.28353 314.97656,112.28353 C 315.91405,112.28353 316.82421,112.09994 317.70703,111.73275 C 318.59764,111.36556 319.40624,110.83822 320.13281,110.15072 C 320.81248,109.49447 321.33983,108.72885 321.71484,107.85384 C 322.08983,106.97885 322.27733,106.0726 322.27734,105.13509 C 322.27733,104.09604 322.10155,103.13901 321.75,102.264 C 321.40623,101.38901 320.89061,100.60386 320.20313,99.908531 C 319.49999,99.181983 318.70702,98.635109 317.82422,98.267906 C 316.94921,97.900734 316.0078,97.717141 315,97.717125 M 314.97656,96.275719 C 316.17968,96.275736 317.31249,96.502298 318.375,96.955406 C 319.4453,97.400735 320.39842,98.049172 321.23438,98.900719 C 322.03905,99.713233 322.65233,100.64292 323.07422,101.68978 C 323.49608,102.73667 323.70701,103.84604 323.70703,105.01791 C 323.70701,106.20541 323.48826,107.33041 323.05078,108.39291 C 322.61326,109.4476 321.97655,110.37728 321.14063,111.18197 C 320.30467,112.00228 319.35155,112.63119 318.28125,113.06869 C 317.21874,113.50619 316.11718,113.72494 314.97656,113.72494 C 313.81249,113.72494 312.69921,113.49838 311.63672,113.04525 C 310.57421,112.59213 309.625,111.93978 308.78906,111.08822 C 307.97656,110.26791 307.35547,109.33822 306.92578,108.29916 C 306.5039,107.25229 306.29297,106.15854 306.29297,105.01791 C 306.29297,104.22104 306.39844,103.4476 306.60938,102.69759 C 306.82031,101.93979 307.13672,101.20151 307.55859,100.48275 C 308.34765,99.154639 309.39062,98.12339 310.6875,97.389 C 311.98437,96.646829 313.41405,96.275736 314.97656,96.275719" + id="text6015" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 372.0293,69.064453 L 376.06055,69.064453 C 377.84179,69.064468 379.18944,69.505874 380.10352,70.388672 C 381.01756,71.263684 381.47459,72.556652 381.47461,74.267578 C 381.47459,75.939461 381.02538,77.228522 380.12695,78.134766 C 379.23632,79.033208 377.95897,79.482426 376.29492,79.482422 L 372.0293,79.482422 L 372.0293,83.630859 L 368.52539,83.630859 L 368.52539,66.369141 L 372.0293,66.369141 L 372.0293,69.064453 M 372.05273,76.599609 L 375.47461,76.599609 C 376.4121,76.599616 377.09179,76.416023 377.51367,76.048828 C 377.93554,75.673836 378.14647,75.080087 378.14648,74.267578 C 378.14647,73.509776 377.93554,72.939464 377.51367,72.556641 C 377.09179,72.166027 376.47069,71.970715 375.65039,71.970703 L 372.05273,71.970703 L 372.05273,76.599609" + id="text6019" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 428.08594,66.322266 L 431.67188,66.322266 L 431.67188,77.150391 C 431.67187,78.486333 431.93749,79.462895 432.46875,80.080078 C 432.99999,80.689456 433.84374,80.994143 435,80.994141 C 436.17187,80.994143 437.02343,80.689456 437.55469,80.080078 C 438.09374,79.470707 438.36327,78.494146 438.36328,77.150391 L 438.36328,66.322266 L 441.91406,66.322266 L 441.91406,77.537109 C 441.91405,79.654301 441.3203,81.279299 440.13281,82.412109 C 438.95311,83.544922 437.24999,84.111328 435.02344,84.111328 C 432.78124,84.111328 431.0625,83.548828 429.86719,82.423828 C 428.67969,81.291018 428.08594,79.662113 428.08594,77.537109 L 428.08594,66.322266 M 435.73828,64.166016 L 435.73828,61.283203 L 438.38672,61.283203 L 438.38672,64.166016 L 435.73828,64.166016 M 431.66016,64.166016 L 431.66016,61.283203 L 434.30859,61.283203 L 434.30859,64.166016 L 431.66016,64.166016" + id="text6023" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 488.08594,66.105469 L 491.67188,66.105469 L 491.67188,76.933594 C 491.67187,78.269536 491.93749,79.246098 492.46875,79.863281 C 492.99999,80.472659 493.84374,80.777346 495,80.777344 C 496.17187,80.777346 497.02343,80.472659 497.55469,79.863281 C 498.09374,79.25391 498.36327,78.277349 498.36328,76.933594 L 498.36328,66.105469 L 501.91406,66.105469 L 501.91406,77.320313 C 501.91405,79.437504 501.3203,81.062502 500.13281,82.195313 C 498.95311,83.328125 497.24999,83.894531 495.02344,83.894531 C 492.78124,83.894531 491.0625,83.332031 489.86719,82.207031 C 488.67969,81.074221 488.08594,79.445316 488.08594,77.320313 L 488.08594,66.105469 M 498.45703,60.304688 L 494.78906,64.640625 L 493.125,64.640625 L 495.43359,60.304688 L 498.45703,60.304688" + id="text6029" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 552.43945,83.630859 L 552.43945,66.369141 L 555.99023,66.369141 L 555.99023,83.630859 L 552.43945,83.630859 M 557.66602,60.521484 L 553.99805,64.857422 L 552.33398,64.857422 L 554.64258,60.521484 L 557.66602,60.521484" + id="text6033" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 610.18359,75 C 610.18359,76.898444 610.60546,78.375005 611.44922,79.429688 C 612.29296,80.476566 613.47265,81.000003 614.98828,81 C 616.51952,81.000003 617.71093,80.476566 618.5625,79.429688 C 619.41405,78.375005 619.83983,76.898444 619.83984,75 C 619.83983,73.101573 619.41405,71.628918 618.5625,70.582031 C 617.71093,69.527358 616.51952,69.000015 614.98828,69 C 613.47265,69.000015 612.29296,69.523452 611.44922,70.570313 C 610.60546,71.617199 610.18359,73.093761 610.18359,75 M 606.5625,75 C 606.5625,72.210949 607.32031,70.000014 608.83594,68.367188 C 610.35937,66.726579 612.41015,65.906268 614.98828,65.90625 C 617.56639,65.906268 619.61717,66.726579 621.14063,68.367188 C 622.67186,70.007826 623.43748,72.218761 623.4375,75 C 623.43748,77.781256 622.67186,79.992191 621.14063,81.632813 C 619.61717,83.273438 617.56639,84.09375 614.98828,84.09375 C 612.41015,84.09375 610.35937,83.273438 608.83594,81.632813 C 607.32031,79.992191 606.5625,77.781256 606.5625,75 M 618.44531,60.503906 L 614.77734,64.839844 L 613.11328,64.839844 L 615.42188,60.503906 L 618.44531,60.503906" + id="text6037" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 670.18359,75.017578 C 670.18359,76.916022 670.60546,78.392583 671.44922,79.447266 C 672.29296,80.494144 673.47265,81.017581 674.98828,81.017578 C 676.51952,81.017581 677.71093,80.494144 678.5625,79.447266 C 679.41405,78.392583 679.83983,76.916022 679.83984,75.017578 C 679.83983,73.119151 679.41405,71.646496 678.5625,70.599609 C 677.71093,69.544936 676.51952,69.017593 674.98828,69.017578 C 673.47265,69.017593 672.29296,69.54103 671.44922,70.587891 C 670.60546,71.634778 670.18359,73.111339 670.18359,75.017578 M 666.5625,75.017578 C 666.5625,72.228527 667.32031,70.017592 668.83594,68.384766 C 670.35937,66.744158 672.41015,65.923846 674.98828,65.923828 C 677.56639,65.923846 679.61717,66.744158 681.14063,68.384766 C 682.67186,70.025404 683.43748,72.23634 683.4375,75.017578 C 683.43748,77.798834 682.67186,80.009769 681.14063,81.650391 C 679.61717,83.291016 677.56639,84.111328 674.98828,84.111328 C 672.41015,84.111328 670.35937,83.291016 668.83594,81.650391 C 667.32031,80.009769 666.5625,77.798834 666.5625,75.017578 M 675.72656,64.166016 L 675.72656,61.283203 L 678.375,61.283203 L 678.375,64.166016 L 675.72656,64.166016 M 671.64844,64.166016 L 671.64844,61.283203 L 674.29688,61.283203 L 674.29688,64.166016 L 671.64844,64.166016" + id="text6041" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 735.5332,106.35352 L 735.5332,103.35352 L 739.44727,99.966797 L 739.44727,102.75586 L 737.04492,104.8418 L 739.44727,106.92773 L 739.44727,109.74023 L 735.5332,106.35352 M 730.4707,106.35352 L 730.4707,103.35352 L 734.4082,99.966797 L 734.4082,102.75586 L 732.00586,104.8418 L 734.4082,106.92773 L 734.4082,109.74023 L 730.4707,106.35352" + id="text6045" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 799.44727,103.3418 L 799.44727,106.3418 L 795.5332,109.72852 L 795.5332,106.93945 L 797.93555,104.83008 L 795.5332,102.76758 L 795.5332,99.955078 L 799.44727,103.3418 M 794.4082,103.3418 L 794.4082,106.3418 L 790.4707,109.72852 L 790.4707,106.93945 L 792.86133,104.83008 L 790.4707,102.76758 L 790.4707,99.955078 L 794.4082,103.3418" + id="text6051" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 883.81641,76.535881 L 886.23047,76.535881 L 886.23047,85.418694 L 883.81641,85.418694 L 883.81641,76.535881 M 883.81641,64.535881 L 886.23047,64.535881 L 886.23047,73.418694 L 883.81641,73.418694 L 883.81641,64.535881 M 877.98047,101.19213 L 892.01953,101.19213 L 892.01953,107.07494 L 889.6875,107.07494 L 889.6875,103.48901 L 877.98047,103.48901 L 877.98047,101.19213" + id="text6057" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 149.9707,129.82617 L 147.58008,137.17383 L 152.37305,137.17383 L 149.9707,129.82617 M 147.9082,126.36914 L 152.00977,126.36914 L 158.23242,143.63086 L 154.50586,143.63086 L 153.33398,140.08008 L 146.64258,140.08008 L 145.50586,143.63086 L 141.76758,143.63086 L 147.9082,126.36914 M 153.42773,120.52148 L 149.75977,124.85742 L 148.0957,124.85742 L 150.4043,120.52148 L 153.42773,120.52148" + id="text6065" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 211.40625,137.91797 C 211.71874,137.73829 211.95312,137.53907 212.10938,137.32031 C 212.26562,137.10157 212.34374,136.86719 212.34375,136.61719 C 212.34374,136.31251 212.2539,136.0547 212.07422,135.84375 C 211.89452,135.62501 211.52343,135.3711 210.96094,135.08203 L 207.85547,133.47656 C 207.55078,133.65626 207.3164,133.85938 207.15234,134.08594 C 206.99609,134.31251 206.91797,134.5547 206.91797,134.8125 C 206.91797,135.1172 207.03125,135.38673 207.25781,135.62109 C 207.49218,135.84766 208.0039,136.16407 208.79297,136.57031 L 211.40625,137.91797 M 205.03125,141.75 L 207.92578,141.75 C 207.98828,142.35938 208.16796,142.8125 208.46484,143.10938 C 208.76953,143.40625 209.19921,143.55469 209.75391,143.55469 C 210.26952,143.55469 210.67968,143.43359 210.98438,143.19141 C 211.28905,142.94141 211.4414,142.60547 211.44141,142.18359 C 211.4414,141.83985 211.32812,141.54297 211.10156,141.29297 C 210.87499,141.03516 210.42577,140.74219 209.75391,140.41406 L 206.95313,138.99609 C 206.0625,138.55079 205.39844,138.03907 204.96094,137.46094 C 204.52344,136.88282 204.30469,136.23438 204.30469,135.51563 C 204.30469,134.82032 204.47266,134.21095 204.80859,133.6875 C 205.15234,133.15626 205.65625,132.71485 206.32031,132.36328 C 205.92969,132.01173 205.64062,131.62892 205.45313,131.21484 C 205.26562,130.79298 205.17187,130.32814 205.17188,129.82031 C 205.17187,128.64845 205.57422,127.70705 206.37891,126.99609 C 207.18359,126.27736 208.2539,125.91799 209.58984,125.91797 C 210.96484,125.91799 212.04296,126.26955 212.82422,126.97266 C 213.60546,127.6758 214.0078,128.64845 214.03125,129.89063 L 211.26563,129.89063 C 211.24999,129.3672 211.09374,128.96876 210.79688,128.69531 C 210.50781,128.42189 210.08984,128.28517 209.54297,128.28516 C 209.05859,128.28517 208.68359,128.39064 208.41797,128.60156 C 208.16015,128.81251 208.03125,129.10939 208.03125,129.49219 C 208.03125,129.8047 208.18359,130.09767 208.48828,130.37109 C 208.80078,130.63673 209.35937,130.95704 210.16406,131.33203 L 212.13281,132.24609 C 213.1328,132.72267 213.87108,133.25392 214.34766,133.83984 C 214.82421,134.41798 215.06249,135.08595 215.0625,135.84375 C 215.06249,136.55469 214.8828,137.17579 214.52344,137.70703 C 214.17186,138.23047 213.66405,138.63672 213,138.92578 C 213.45312,139.32422 213.79296,139.76563 214.01953,140.25 C 214.24608,140.73438 214.35936,141.26563 214.35938,141.84375 C 214.35936,143.04688 213.92968,144.03906 213.07031,144.82031 C 212.21093,145.60937 211.10546,146.0039 209.75391,146.00391 C 208.26953,146.0039 207.1289,145.64453 206.33203,144.92578 C 205.53515,144.20703 205.10156,143.14844 205.03125,141.75 M 203.97656,173.625 L 203.97656,160.59375 C 203.97656,159.29689 204.48047,158.25002 205.48828,157.45313 C 206.49609,156.64845 207.83984,156.24611 209.51953,156.24609 C 211.23046,156.24611 212.5703,156.63674 213.53906,157.41797 C 214.5078,158.19923 214.99217,159.27345 214.99219,160.64063 C 214.99217,161.48439 214.84764,162.17579 214.55859,162.71484 C 214.27733,163.25392 213.83983,163.66798 213.24609,163.95703 C 214.16796,164.32423 214.85936,164.86329 215.32031,165.57422 C 215.78905,166.28516 216.02342,167.16016 216.02344,168.19922 C 216.02342,169.94922 215.51952,171.36328 214.51172,172.44141 C 213.5039,173.51953 212.18358,174.05859 210.55078,174.05859 C 210.32421,174.05859 210.0703,174.04687 209.78906,174.02344 C 209.51562,174 209.21874,173.96484 208.89844,173.91797 L 208.89844,171.17578 C 208.99999,171.19141 209.10156,171.20313 209.20313,171.21094 C 209.31249,171.21875 209.47265,171.22266 209.68359,171.22266 C 210.60546,171.22266 211.3164,170.96875 211.81641,170.46094 C 212.3164,169.94532 212.5664,169.21485 212.56641,168.26953 C 212.5664,167.35548 212.29296,166.66016 211.74609,166.18359 C 211.20702,165.70704 210.41796,165.46876 209.37891,165.46875 L 209.0625,165.46875 L 209.07422,163.06641 C 209.12109,163.07423 209.17187,163.08204 209.22656,163.08984 C 209.28124,163.08985 209.36327,163.08985 209.47266,163.08984 C 210.16796,163.08985 210.6953,162.91798 211.05469,162.57422 C 211.42187,162.22267 211.60546,161.71486 211.60547,161.05078 C 211.60546,160.38673 211.41405,159.88283 211.03125,159.53906 C 210.65624,159.18751 210.10546,159.01173 209.37891,159.01172 C 208.70703,159.01173 208.19531,159.20705 207.84375,159.59766 C 207.49218,159.98048 207.3164,160.54298 207.31641,161.28516 L 207.31641,173.625 L 203.97656,173.625" + id="text6073" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 267.09961,140.51367 L 269.94727,140.51367 C 271.60351,140.51367 272.80272,140.08008 273.54492,139.21289 C 274.2871,138.34571 274.65819,136.94727 274.6582,135.01758 C 274.65819,133.09571 274.31053,131.68165 273.61523,130.77539 C 272.92772,129.86134 271.8496,129.40431 270.38086,129.4043 L 267.09961,129.4043 L 267.09961,133.23633 L 270.88477,133.23633 L 270.88477,135.47461 L 267.09961,135.47461 L 267.09961,140.51367 M 263.61914,143.63086 L 263.61914,135.47461 L 261.74414,135.47461 L 261.74414,133.23633 L 263.61914,133.23633 L 263.61914,126.36914 L 270.4043,126.36914 C 273.04491,126.36916 275.01366,127.084 276.31055,128.51367 C 277.60741,129.93556 278.25584,132.10353 278.25586,135.01758 C 278.25584,136.60352 278.01756,137.99805 277.54102,139.20117 C 277.07225,140.4043 276.38084,141.36914 275.4668,142.0957 C 274.77928,142.64258 273.99413,143.03711 273.11133,143.2793 C 272.23632,143.51367 271.00585,143.63086 269.41992,143.63086 L 263.61914,143.63086" + id="text6077" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 626.72461,139.55273 C 627.17773,140.04493 627.68945,140.41211 628.25977,140.6543 C 628.83007,140.89649 629.47069,141.01758 630.18164,141.01758 C 631.71288,141.01758 632.90428,140.49414 633.75586,139.44727 C 634.60741,138.39258 635.03319,136.91602 635.0332,135.01758 C 635.03319,134.24415 634.96288,133.54493 634.82227,132.91992 C 634.68163,132.28712 634.4785,131.73634 634.21289,131.26758 L 626.72461,139.55273 M 625.98633,138.36914 L 633.39258,130.21289 C 632.9785,129.81447 632.50585,129.51759 631.97461,129.32227 C 631.44335,129.11916 630.84569,129.01759 630.18164,129.01758 C 628.66601,129.01759 627.48632,129.54103 626.64258,130.58789 C 625.79882,131.63478 625.37695,133.11134 625.37695,135.01758 C 625.37695,135.72071 625.42382,136.34571 625.51758,136.89258 C 625.61914,137.43946 625.77539,137.93165 625.98633,138.36914 M 621.36914,143.36133 L 623.51367,140.9707 C 622.91992,140.16602 622.47851,139.27149 622.18945,138.28711 C 621.90039,137.29493 621.75586,136.20509 621.75586,135.01758 C 621.75586,132.22853 622.51367,130.01759 624.0293,128.38477 C 625.55273,126.74416 627.60351,125.92385 630.18164,125.92383 C 631.28319,125.92385 632.27147,126.06447 633.14648,126.3457 C 634.02928,126.62697 634.84178,127.06056 635.58398,127.64648 L 637.30664,125.70117 L 638.45508,126.73242 L 636.63867,128.70117 C 637.30272,129.5215 637.79881,130.45509 638.12695,131.50195 C 638.46287,132.54884 638.63084,133.72071 638.63086,135.01758 C 638.63084,137.79883 637.86912,140.00977 636.3457,141.65039 C 634.82225,143.29102 632.76757,144.11133 630.18164,144.11133 C 629.01757,144.11133 627.96679,143.94727 627.0293,143.61914 C 626.0996,143.29102 625.26367,142.79102 624.52148,142.11914 L 622.50586,144.4043 L 621.36914,143.36133" + id="text6081" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 690,127.98633 C 689.42968,127.98634 688.9414,128.18556 688.53516,128.58398 C 688.13672,128.98244 687.9375,129.4629 687.9375,130.02539 C 687.9375,130.60353 688.13672,131.09181 688.53516,131.49023 C 688.93359,131.88868 689.42187,132.0879 690,132.08789 C 690.5625,132.0879 691.04296,131.88478 691.44141,131.47852 C 691.83984,131.07228 692.03906,130.5879 692.03906,130.02539 C 692.03906,129.4629 691.83984,128.98244 691.44141,128.58398 C 691.04296,128.18556 690.5625,127.98634 690,127.98633 M 690,126.47461 C 690.98437,126.47463 691.82031,126.82619 692.50781,127.5293 C 693.20312,128.22462 693.55077,129.06447 693.55078,130.04883 C 693.55077,131.0254 693.20312,131.86134 692.50781,132.55664 C 691.81249,133.25196 690.96875,133.59962 689.97656,133.59961 C 688.99218,133.59962 688.15625,133.25587 687.46875,132.56836 C 686.78906,131.88087 686.44922,131.04103 686.44922,130.04883 C 686.44922,129.05666 686.79297,128.21291 687.48047,127.51758 C 688.17578,126.82228 689.01562,126.47463 690,126.47461 M 695.51953,156.29883 L 695.51953,157.59961 L 694.19531,157.59961 L 694.19531,173.63086 L 692.42578,173.63086 L 692.42578,157.59961 L 690.57422,157.59961 L 690.57422,173.63086 L 688.78125,173.63086 L 688.78125,164.44336 C 687.47656,164.39649 686.43359,164.00196 685.65234,163.25977 C 684.87109,162.51759 684.48047,161.56056 684.48047,160.38867 C 684.48047,159.15431 684.89844,158.16603 685.73438,157.42383 C 686.57031,156.67385 687.67968,156.29885 689.0625,156.29883 L 695.51953,156.29883" + id="text6085" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 373.13672,6.5214844 L 376.08984,6.5214844 L 381.72656,13.095703 L 378.97266,13.095703 L 374.625,8.7480469 L 370.25391,13.095703 L 367.5,13.095703 L 373.13672,6.5214844" + id="text6091" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 750.67969,128.67773 L 750.67969,125.79492 L 753.32813,125.79492 L 753.32813,128.67773 L 750.67969,128.67773 M 746.60156,128.67773 L 746.60156,125.79492 L 749.25,125.79492 L 749.25,128.67773 L 746.60156,128.67773 M 753.39844,155.0332 L 749.73047,159.36914 L 748.06641,159.36914 L 750.375,155.0332 L 753.39844,155.0332" + id="text6099" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 171.07031,197.29102 L 175.92188,197.29102 L 175.92188,189.29883 L 173.97656,189.29883 L 171.07031,197.29102 M 165,203.63086 L 171.80859,186.36914 L 187.81641,186.36914 L 187.81641,189.36914 L 179.34375,189.36914 L 179.34375,193.04883 L 187.05469,193.04883 L 187.05469,196.00195 L 179.34375,196.00195 L 179.34375,200.44336 L 188.25,200.44336 L 188.25,203.63086 L 175.92188,203.63086 L 175.92188,200.08008 L 170.0625,200.08008 L 168.76172,203.63086 L 165,203.63086" + id="text6105" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 300.46875,193.23633 C 300.32031,193.22071 300.20312,193.20899 300.11719,193.20117 C 300.03906,193.19337 299.96484,193.18946 299.89453,193.18945 C 299.05859,193.18946 298.42578,193.53321 297.99609,194.2207 C 297.5664,194.90821 297.35156,195.92384 297.35156,197.26758 C 297.35156,198.04102 297.4375,198.70899 297.60938,199.27148 C 297.78906,199.83399 298.04687,200.28711 298.38281,200.63086 L 300.46875,193.23633 M 296.68359,206.49023 L 297.48047,203.63086 C 296.30859,203.13867 295.42187,202.35352 294.82031,201.27539 C 294.21875,200.19727 293.91797,198.85352 293.91797,197.24414 C 293.91797,195.11134 294.45312,193.43946 295.52344,192.22852 C 296.60156,191.01759 298.07421,190.41212 299.94141,190.41211 C 300.15234,190.41212 300.35937,190.41994 300.5625,190.43555 C 300.76562,190.45119 300.96874,190.47462 301.17188,190.50586 L 301.69922,188.56055 L 302.97656,188.56055 L 302.34375,190.78711 C 303.32811,191.09181 304.09765,191.63478 304.65234,192.41602 C 305.20702,193.18946 305.52733,194.17774 305.61328,195.38086 L 302.32031,195.36914 C 302.28124,194.98634 302.1914,194.65821 302.05078,194.38477 C 301.91796,194.10353 301.72265,193.85743 301.46484,193.64648 L 299.36719,201.13477 C 299.38281,201.13477 299.40624,201.13867 299.4375,201.14648 C 299.67187,201.16992 299.85156,201.18164 299.97656,201.18164 C 300.66406,201.18164 301.19921,200.99024 301.58203,200.60742 C 301.97265,200.22461 302.23437,199.62305 302.36719,198.80273 L 305.66016,198.80273 C 305.54296,200.41993 304.96874,201.70117 303.9375,202.64648 C 302.91405,203.5918 301.59374,204.06445 299.97656,204.06445 C 299.76562,204.06445 299.55077,204.05664 299.33203,204.04102 C 299.11328,204.02539 298.88671,204.00195 298.65234,203.9707 L 297.96094,206.49023 L 296.68359,206.49023 M 304.19531,223.0957 L 301.99219,223.0957 C 301.92968,222.54884 301.72264,222.12696 301.37109,221.83008 C 301.01952,221.5254 300.55468,221.37306 299.97656,221.37305 C 299.26562,221.37306 298.70702,221.69337 298.30078,222.33398 C 297.89452,222.96681 297.6914,223.85353 297.69141,224.99414 C 297.6914,226.14259 297.89452,227.01758 298.30078,227.61914 C 298.70702,228.22071 299.29687,228.52149 300.07031,228.52148 C 300.64061,228.52149 301.09765,228.35743 301.44141,228.0293 C 301.78514,227.70118 301.99218,227.23633 302.0625,226.63477 L 304.32422,226.62305 C 304.2617,227.70899 303.83592,228.58008 303.04688,229.23633 C 302.2578,229.89258 301.24218,230.22071 300,230.2207 C 298.54687,230.22071 297.39843,229.75977 296.55469,228.83789 C 295.71874,227.91602 295.30078,226.65821 295.30078,225.06445 C 295.30078,223.45509 295.72656,222.17384 296.57813,221.2207 C 297.43749,220.25978 298.58593,219.77931 300.02344,219.7793 C 301.21093,219.77931 302.18749,220.084 302.95313,220.69336 C 303.72655,221.30275 304.14061,222.10353 304.19531,223.0957 M 300,217.7168 C 298.99999,217.71681 298.06249,217.8965 297.1875,218.25586 C 296.32031,218.61525 295.54687,219.13869 294.86719,219.82617 C 294.17187,220.52931 293.64062,221.32618 293.27344,222.2168 C 292.90625,223.09962 292.72265,224.0254 292.72266,224.99414 C 292.72265,225.97071 292.90625,226.89649 293.27344,227.77148 C 293.64062,228.64649 294.17187,229.43164 294.86719,230.12695 C 295.55468,230.81446 296.33984,231.3418 297.22266,231.70898 C 298.10546,232.07617 299.03124,232.25977 300,232.25977 C 300.96874,232.25977 301.89452,232.07617 302.77734,231.70898 C 303.66796,231.3418 304.46874,230.80664 305.17969,230.10352 C 305.86717,229.43164 306.3867,228.66211 306.73828,227.79492 C 307.09764,226.92774 307.27733,225.99415 307.27734,224.99414 C 307.27733,224.00978 307.09373,223.08009 306.72656,222.20508 C 306.36717,221.32228 305.84373,220.53712 305.15625,219.84961 C 304.46092,219.15431 303.67577,218.62697 302.80078,218.26758 C 301.92577,217.90041 300.99218,217.71681 300,217.7168 M 299.97656,216.27539 C 301.16405,216.27541 302.28514,216.49416 303.33984,216.93164 C 304.40233,217.36916 305.35155,218.00587 306.1875,218.8418 C 307.0078,219.66212 307.63279,220.60353 308.0625,221.66602 C 308.49217,222.72071 308.70701,223.8379 308.70703,225.01758 C 308.70701,226.20509 308.49217,227.31446 308.0625,228.3457 C 307.64061,229.37696 307.01561,230.29883 306.1875,231.11133 C 305.3203,231.95508 304.35155,232.60352 303.28125,233.05664 C 302.21093,233.50195 301.10936,233.72461 299.97656,233.72461 C 298.82812,233.72461 297.73046,233.50586 296.68359,233.06836 C 295.64453,232.62305 294.70312,231.97852 293.85938,231.13477 C 293.02343,230.30664 292.38672,229.36914 291.94922,228.32227 C 291.51172,227.26758 291.29297,226.16602 291.29297,225.01758 C 291.29297,223.85353 291.51172,222.74415 291.94922,221.68945 C 292.38672,220.62697 293.02343,219.66994 293.85938,218.81836 C 294.67968,217.99025 295.60937,217.36134 296.64844,216.93164 C 297.68749,216.49416 298.79687,216.27541 299.97656,216.27539" + id="text6109" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 472.88672,203.63086 L 472.88672,186.36914 L 476.60156,186.36914 L 483.60938,198.22852 L 483.60938,186.36914 L 487.11328,186.36914 L 487.11328,203.63086 L 483.44531,203.63086 L 476.39063,191.77148 L 476.39063,203.63086 L 472.88672,203.63086 M 483.82031,181.0957 C 483.61717,182.07229 483.31639,182.79494 482.91797,183.26367 C 482.51952,183.72463 482.0078,183.9551 481.38281,183.95508 C 481.21874,183.9551 481.0664,183.94729 480.92578,183.93164 C 480.78515,183.90822 480.64452,183.87307 480.50391,183.82617 L 479.48438,183.52148 C 479.33593,183.48244 479.19921,183.4551 479.07422,183.43945 C 478.94921,183.41604 478.82812,183.40432 478.71094,183.4043 C 478.44531,183.40432 478.23046,183.47463 478.06641,183.61523 C 477.90234,183.75588 477.77343,183.98635 477.67969,184.30664 L 476.39063,184.30664 C 476.57812,183.36135 476.86718,182.66604 477.25781,182.2207 C 477.64843,181.77541 478.15624,181.55276 478.78125,181.55273 C 478.9453,181.55276 479.10937,181.56838 479.27344,181.59961 C 479.43749,181.62307 479.60937,181.66213 479.78906,181.7168 L 480.87891,182.00977 C 480.97265,182.04104 481.0703,182.06447 481.17188,182.08008 C 481.28124,182.09572 481.39843,182.10354 481.52344,182.10352 C 481.77343,182.10354 481.98046,182.02151 482.14453,181.85742 C 482.3164,181.68557 482.4453,181.43166 482.53125,181.0957 L 483.82031,181.0957" + id="text6113" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 535.83398,220.83432 L 539.2207,220.83432 L 538.33008,225.93198 C 538.21289,226.55698 538.12304,227.15073 538.06055,227.71323 C 537.99804,228.26792 537.96679,228.72104 537.9668,229.0726 C 537.96679,229.79917 538.13085,230.34214 538.45898,230.70151 C 538.7871,231.05307 539.2871,231.22885 539.95898,231.22885 C 540.74023,231.22885 541.3457,230.90854 541.77539,230.26791 C 542.21288,229.62729 542.57616,228.49058 542.86523,226.85776 L 543.91992,220.83432 L 547.30664,220.83432 L 545.04492,233.6312 L 541.9043,233.6312 L 542.11523,232.2601 C 541.7871,232.86948 541.41991,233.31479 541.01367,233.59604 C 540.61523,233.87729 540.14257,234.01791 539.5957,234.01791 C 539.07226,234.01791 538.60742,233.90073 538.20117,233.66635 C 537.79492,233.43979 537.42773,233.08432 537.09961,232.59995 L 536.04492,238.76401 L 532.69336,238.76401 L 535.83398,220.83432" + id="text6117" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 607.875,197.70117 C 607.74217,199.66211 606.98436,201.22071 605.60156,202.37695 C 604.22655,203.5332 602.42968,204.11133 600.21094,204.11133 C 597.65624,204.11133 595.66796,203.31445 594.24609,201.7207 C 592.83203,200.12696 592.125,197.89258 592.125,195.01758 C 592.125,192.08009 592.84765,189.83009 594.29297,188.26758 C 595.73828,186.7051 597.8164,185.92385 600.52734,185.92383 C 602.73046,185.92385 604.46874,186.46291 605.74219,187.54102 C 607.02342,188.61134 607.72655,190.12697 607.85156,192.08789 L 604.34766,192.08789 C 604.19921,191.11134 603.80077,190.36915 603.15234,189.86133 C 602.50389,189.34572 601.6289,189.08791 600.52734,189.08789 C 598.96484,189.08791 597.77734,189.59181 596.96484,190.59961 C 596.15234,191.60743 595.74609,193.08009 595.74609,195.01758 C 595.74609,196.89258 596.14843,198.3418 596.95313,199.36523 C 597.76562,200.38868 598.91796,200.90039 600.41016,200.90039 C 601.48827,200.90039 602.37108,200.62696 603.05859,200.08008 C 603.74608,199.52539 604.19139,198.73243 604.39453,197.70117 L 607.875,197.70117 M 597.62109,208.76367 L 597.62109,207.25195 C 598.24609,207.41601 598.81249,207.54101 599.32031,207.62695 C 599.82812,207.71289 600.26171,207.75586 600.62109,207.75586 C 601.02733,207.75586 601.32421,207.68554 601.51172,207.54492 C 601.69921,207.41211 601.79296,207.19726 601.79297,206.90039 C 601.79296,206.60351 601.68358,206.39258 601.46484,206.26758 C 601.24608,206.14258 600.8828,206.08008 600.375,206.08008 C 600.1953,206.08008 600.05858,206.08008 599.96484,206.08008 C 599.87108,206.08789 599.78515,206.0957 599.70703,206.10352 L 599.70703,203.63086 L 600.90234,203.63086 L 600.90234,204.68555 L 601.07813,204.68555 C 601.99218,204.68555 602.67968,204.87305 603.14063,205.24805 C 603.60155,205.62304 603.83202,206.18164 603.83203,206.92383 C 603.83202,207.70507 603.57421,208.29101 603.05859,208.68164 C 602.54296,209.07226 601.76952,209.26757 600.73828,209.26758 C 600.33983,209.26757 599.87108,209.2246 599.33203,209.13867 C 598.80077,209.05273 598.23046,208.92773 597.62109,208.76367" + id="text6121" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" + d="M 721.7168,216.36914 L 721.7168,219.82617 L 718.23633,219.82617 L 718.23633,216.36914 L 721.7168,216.36914 M 721.55273,221.39648 C 721.55273,221.47462 721.55663,221.5879 721.56445,221.73633 C 721.57226,221.88478 721.57616,221.99415 721.57617,222.06445 C 721.57616,222.74415 721.50194,223.31446 721.35352,223.77539 C 721.20507,224.23634 720.96679,224.66602 720.63867,225.06445 C 720.38085,225.36134 720.00195,225.70118 719.50195,226.08398 C 719.00976,226.4668 718.69335,226.74415 718.55273,226.91602 C 718.24804,227.25977 718.0332,227.57618 717.9082,227.86523 C 717.79101,228.1543 717.73242,228.4668 717.73242,228.80273 C 717.73242,229.55274 717.93554,230.13477 718.3418,230.54883 C 718.74804,230.95508 719.32226,231.15821 720.06445,231.1582 C 720.79882,231.15821 721.38085,230.91211 721.81055,230.41992 C 722.24023,229.91993 722.4746,229.22071 722.51367,228.32227 L 725.8418,228.32227 L 725.8418,228.68555 C 725.84178,230.3418 725.31835,231.66211 724.27148,232.64648 C 723.23241,233.62305 721.83007,234.11133 720.06445,234.11133 C 718.25976,234.11133 716.82226,233.64648 715.75195,232.7168 C 714.68945,231.7793 714.1582,230.53321 714.1582,228.97852 C 714.1582,228.40821 714.2168,227.90821 714.33398,227.47852 C 714.45117,227.04883 714.63086,226.65821 714.87305,226.30664 C 715.18554,225.86915 715.67773,225.39259 716.34961,224.87695 C 717.02148,224.36134 717.43554,224.03321 717.5918,223.89258 C 717.88867,223.60353 718.0996,223.29884 718.22461,222.97852 C 718.35742,222.6504 718.42382,222.25587 718.42383,221.79492 C 718.42382,221.75587 718.41992,221.69337 718.41211,221.60742 C 718.40429,221.51368 718.40039,221.44337 718.40039,221.39648 L 721.55273,221.39648" + id="text6131" /> + <path + style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Matrix Unicode" + d="" + id="text6955" /> + </g> +</svg> diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/base_layer.PNG b/keyboards/s60-x/keymaps/ansi_qwertz/docs/base_layer.PNG Binary files differnew file mode 100644 index 0000000000..c730c2d65a --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/base_layer.PNG diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/function_layer.PNG b/keyboards/s60-x/keymaps/ansi_qwertz/docs/function_layer.PNG Binary files differnew file mode 100644 index 0000000000..fae2439cab --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/function_layer.PNG diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/gaming_layer.PNG b/keyboards/s60-x/keymaps/ansi_qwertz/docs/gaming_layer.PNG Binary files differnew file mode 100644 index 0000000000..59b202be2b --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/gaming_layer.PNG diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/keymap.c b/keyboards/s60-x/keymaps/ansi_qwertz/keymap.c new file mode 100644 index 0000000000..317a245bef --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/keymap.c @@ -0,0 +1,237 @@ +/* +Copyright 2016 Julien Pecqueur <julien@peclu.net> +Copyright 2016 Felix Uhl <ifreilicht@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "s60-x.h" + +//make keymap a little easier to read +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +#define ONESHOT_TAP_TOGGLE 2 +#define ONESHOT_TIMEOUT 1 + +//uncomment to activate dead keys +//#define DONT_REVIVE_DEADKEYS 1 + +//Function keycodes for better readability +//SpaceFN +//OneShot LeftShift +//GamingMode Lock (disables SpaceFn and OneShot LShift) +//Function +//Mute microphone +#define KC_SPACEFN KC_FN0 +#define KC_OSLS KC_FN3 +#define KC_GMLK KC_FN1 +#define KC_FUNC KC_FN2 +#define MICMUTE RCTL(KC_LCTL) + +enum function_codes { + F_SPACEFN = 0, + F_OSLS = 3, + F_GMLK = 1, + F_FUNC = 2 +}; + +enum layer_names { + DEFAULT, + GAMING, + FUNCTION +}; + +enum languages { + GERMAN +}; + +#define LANGUAGE GERMAN + +enum custom_keycodes { + KC_CM_A = SAFE_RANGE, +// KC_CM_B, + KC_CM_C, +// KC_CM_D, + KC_CM_E, +// KC_CM_F, + KC_CM_G, +// KC_CM_H, + KC_CM_I, +// KC_CM_J, + KC_CM_K, + KC_CM_L, + KC_CM_M, + KC_CM_N, + KC_CM_O, + KC_CM_P, +// KC_CM_Q, + KC_CM_R, + KC_CM_S, +// KC_CM_T, + KC_CM_U, +// KC_CM_V, + KC_CM_W, +// KC_CM_X, + KC_CM_Y, + KC_CM_Z +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layout 0: Default Layer + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|Del| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Z| U| I| O| P| [| ]|BckSp| + * |-----------------------------------------------------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Y| X| C| V| B| N| M| ,| .| /| Up |RSft| + * |-----------------------------------------------------------| + * |Fn2 |Gui |Alt | SpaceFn |Alt |Left|Down|Right| + * `-----------------------------------------------------------' + */ + [DEFAULT] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Z, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_UP, KC_RSFT, \ + KC_FUNC, KC_LGUI, KC_LALT, KC_SPACEFN, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* Layout 1: Gaming Layer, SpaceFn disabled + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | |Fn1 | + * |-----------------------------------------------------------| + * | |RSft| | Space | | | | | + * `-----------------------------------------------------------' + */ + [GAMING] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GMLK, \ + _______, KC_RSFT, _______, KC_SPC, _______, _______, _______, _______ + ), + + /* Layout 2: Function Layer + * MicMute requires special software to be installed. Check readme.md for more information + * ,-----------------------------------------------------------. + * |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|RES| + * |-----------------------------------------------------------| + * | | | | |Prv|Ply|Nxt| Ü | | Ö | |Prt|Slk|Pau | + * |-----------------------------------------------------------| + * | | Ä | ß | |Vl-|Mut|Vl+| | | | | |PEnt | + * |-----------------------------------------------------------| + * | | | | |MicMut|Cal| | | | |Pau |PUp |Fn1 | + * |-----------------------------------------------------------| + * | | | | | |Home|PDn |End | + * `-----------------------------------------------------------' + */ + [FUNCTION] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, RESET, \ + _______, _______, KC_CM_W, KC_CM_E, KC_MPRV, KC_MPLY, KC_MNXT, KC_CM_U, KC_CM_I, KC_CM_O, KC_CM_P, KC_PSCR, KC_SLCK, KC_PAUS, \ + _______, KC_CM_A, KC_CM_S, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, KC_CM_K, KC_CM_L, _______, _______, _______, KC_PENT, \ + _______, _______, KC_CM_Y, _______, KC_CM_C, MICMUTE, KC_CALC, KC_CM_N, KC_CM_M, _______, _______, _______, _______, KC_PGUP, KC_GMLK, \ + _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), +}; + +/* +* Fn action definition +*/ +const uint16_t PROGMEM fn_actions[] = { + [F_SPACEFN] = ACTION_LAYER_TAP_KEY(2, KC_SPACE), // SpaceFn layout 1 + [F_GMLK] = ACTION_LAYER_TOGGLE(1), // Disable SpaceFn and Oneshot Shift + [F_FUNC] = ACTION_LAYER_MOMENTARY(2), // SpaceFn layout 1 + [F_OSLS] = ACTION_MODS_ONESHOT(MOD_LSFT) // Oneshot Leftshift +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +}; + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_german(uint16_t keycode, keyrecord_t *record) { + uint16_t send_code = 0; + if (record->event.pressed) { + switch (keycode) { + case KC_CM_A: + send_code = KC_Q; + break; + case KC_CM_O: + send_code = KC_P; + break; + case KC_CM_U: + send_code = KC_Y; + break; + case KC_CM_S: + send_code = KC_S; + break; + } + + if (send_code == 0) { + return true; + } + else { + register_code(KC_RALT); + register_code(send_code); + unregister_code(send_code); + unregister_code(KC_RALT); + return false; + } + } + return true; +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + //revive dead keys +#ifndef DONT_REVIVE_DEADKEYS + bool shift_active = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_LSFT)); + bool altgr_active = keyboard_report->mods & (MOD_BIT(KC_RALT)); + if ((keycode == KC_QUOT && !altgr_active) || + keycode == KC_GRV || + (keycode == KC_6 && shift_active)) + { + if (record->event.pressed) { + register_code(keycode); + unregister_code(keycode); + register_code(KC_SPACE); + unregister_code(KC_SPACE); + } + return false; + } +#endif +#if LANGUAGE == GERMAN + return process_german(keycode, record); +#else + return true; +#endif +} + +void led_set_user(uint8_t usb_led) { + +}
\ No newline at end of file diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md new file mode 100644 index 0000000000..b220106121 --- /dev/null +++ b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md @@ -0,0 +1,94 @@ +# ANSI_QWERTZ + +[Click here to go to the layers directly.](readme.md#1-layers) + +This keymap was specifically designed to support keycaps with ANSI layout and legends, while retaining the possibility of inputting characters +with diacritics that are normally not used in the english language. + +It currently relies on the US-International keyboard layout, which can be installed in any current operating system without the use of third party hardware. + +##0 Features +* Input of letters with diacritics on familiar QWERTZ layout +* Support for ANSI-legend keycaps +* Option to "revive" all dead keys +* Dedicated arrow cluster +* SpaceFN for easy access to Function keys and diacritic input +* Locking "Gaming Mode" that disables SpaceFN and allows to bind GUI key in Games +* Reset key binding, no need to press hardware reset button to program +* Microphone Mute key (requires 3rd-party software, see below) + +###0.0 Languages +The US-International Layout is currently required for the support of non-english languages. This keymap swaps Y and Z to provide the familiar QWERTZ position for characters when using that layout. +All diacritic characters are input by either holding `Space` or `Fn` and pressing the corresponding key. For languages that aren't yet supported explicitly, +one can also use AltGr to input the characters as intended by the US-Intl layout or the dead keys, if they're kept from being [revived](readme.md#04-revive-dead-keys). + +The illustration below shows the "US International" layout available in the Language settings of Windows, Linux and Mac OS. + + + +Not all languages are supported by this layout. Linux also offers the "US International Alternative" layout, +which contains more dead keys to input pretty much every diacritic character in a language using latin letters. More information can be found [here](http://web.archive.org/web/20160818101234/http://dry.sailingissues.com/us-international-keyboard-layout.html). + + + +####0.0.0 Explicitly Supported Languages +* German + +####0.0.1 Implicitly Supported Languages +This list only applies to Windows. Linux systems support all languages, see above. This list might be incomplete! Please add your language if you find it's supported. + +* French + +###0.1 SpaceFN +SpaceFN basically means that `Space` acts as a normal spacebar when tapped, but acts as a layer-key when held down. +This means that you can't hold space to output multiple spaces consecutively and that space only registers once released. +The advantage is that the spacebar is easier to reach than any other `Fn`-key could be. + +###0.2 "Gaming Mode" +To alleviate the problems SpaceFN would cause when gaming, the Gaming Mode is pretty much a layer that can be turned on by pressing Fn+RShift. +This will turn the double-role Spacebar into a normal one, so the Fn-layer (and thus function and media keys) can only be accessed with the Fn-key. +It also turns the GUI-key (aka Win-key aka Super-key) into Right Shift, so it can be bound in Games. This is especially useful when playing with ESDF instead of WASD. + +###0.3 Mute Microphone +The function layer has a "Mute Microphone"-key. As this is not an existing media key and you can't normally set a shortcut to this function, +you need to set this up in software before using it, see below. This key is bound to `RCtrl+LCtrl`, a keycombination that +no other program in existence uses for anything, at least to my knowledge. It also can't be pressed with this keymap in any other way. + +####0.3.0 Linux +Follow [these instructions](http://askubuntu.com/a/13364). + +#####0.3.1 Windows (Requires 3rd Party Software) +*DISCLAIMER: I take no responsibility for any potential harm caused by third party applications!* + +You'll need a utility called "MicMute". It is available on [Sourceforge](https://sourceforge.net/projects/micmute/). +After installing and running the tool, you only need to use the "Setup Shortcut" option to bind the key to muting the microphone +and check whether your microphone is selected under "Devices". + +###0.4 Revive Dead Keys +Some diacritics that are commonly used are dead keys on the international layouts, for example `` ` ``, `'`, or `"`. +The dead keys on the regular international layout (shown in red [here](readme.md#00-languages)) are revived with this keymap by automatically inserting a space if one of those characters is typed. +If you don't want this to be the case, uncomment the following line in `keymap.c` prior to compiling: +``` +//#define DONT_REVIVE_DEADKEYS 1 +``` + +##1 Layers +###1.0 Base Layer +The base layer is shown here for ANSI keysm, HHKB-style right shift and split backspace. If you use a 2U backspace key there, `Del` will not be available. +Again, the Y and Z keys are swapped, so you get the QWERTZ-positions of Y and Z when using the US-International layout. + + + +###1.1 Gaming layer +To turn this layer on, please use the combination `Fn+RShift`, not `Space+RShift`. If you do the latter, the Function layer will become stuck. You can press `Fn` once to unstick it if this happens to you. A solution is being worked on. + + + +###1.2 Function Layer +This is the function layer for German diacritics. It can be accessed via the `Fn` or by holding `Space` on the base layer. + + + + + + diff --git a/keyboards/s60-x/keymaps/custom/keymap.c b/keyboards/s60-x/keymaps/custom/keymap.c new file mode 100644 index 0000000000..fb2a40b85e --- /dev/null +++ b/keyboards/s60-x/keymaps/custom/keymap.c @@ -0,0 +1,28 @@ +#include "s60-x.h" + +/* Main layer: Test layout, using all keys. + + 0 1 2 3 4 5 6 7 8 9 A B C D E + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ 0 │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │PGUP │BKSPC│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + 1 │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + 2 │CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │PGDN │ENTER│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + 3 │LSHFT│HOME │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ END │RSHFT│ UP │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + 4 │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_GUI│ APP │RCTRL│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +*/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: ANSI qwerty */ + LEGACY_KEYMAP(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, PGUP, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, PGDN, ENT , \ + LSFT, HOME, Z, X, C, V, B, N, M, COMM, DOT, SLSH, END, RSFT, UP, \ + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL), +}; +const uint16_t PROGMEM fn_actions[] = {}; + diff --git a/keyboards/s60-x/keymaps/custom/readme.md b/keyboards/s60-x/keymaps/custom/readme.md new file mode 100644 index 0000000000..cf87bd915f --- /dev/null +++ b/keyboards/s60-x/keymaps/custom/readme.md @@ -0,0 +1,15 @@ +### 8 Custom +The custom keymap - [keymap_custom.c](keymap_custom.c) - is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys. + +#### 8.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │PgUp │BkSpc│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │PgDwn│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│Home │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ End │Shift│ Up │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ diff --git a/keyboards/s60-x/keymaps/default/keymap.c b/keyboards/s60-x/keymaps/default/keymap.c new file mode 100644 index 0000000000..eb0c6b056e --- /dev/null +++ b/keyboards/s60-x/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +#include "s60-x.h" + +/* 0: Main layer +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +*/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: ANSI qwerty */ + LEGACY_KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT , \ + LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, RALT, FN0, APP, RCTL), + +/* 1: Fn layer +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │Left │Down │Right│ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +*/ + LEGACY_KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ + TRNS, TRNS, UP, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, PGDN, PSCR, SLCK, PAUS, TRNS, \ + TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; diff --git a/keyboards/s60-x/keymaps/default/readme.md b/keyboards/s60-x/keymaps/default/readme.md new file mode 100644 index 0000000000..01cda9df9b --- /dev/null +++ b/keyboards/s60-x/keymaps/default/readme.md @@ -0,0 +1,27 @@ +### 1 Standard - ANSI +The standard keymap is the one that is pre-flashed on the S60-X. + +#### 1.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 1.1 Fn layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │Left │Down │Right│ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ diff --git a/keyboards/s60-x/keymaps/hasu/keymap.c b/keyboards/s60-x/keymaps/hasu/keymap.c new file mode 100644 index 0000000000..cbeaae0281 --- /dev/null +++ b/keyboards/s60-x/keymaps/hasu/keymap.c @@ -0,0 +1,182 @@ +#include "s60-x.h" + +/* + * Hasu + */ +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap 0: Default Layer +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ Fn2 │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ Fn1 │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ Fn3 │ Fn3 │ Fn0 │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ + CAPS, A, S, D, F, G, H, J, K, L, FN2, QUOT, NO, ENT, \ + LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, FN1, NO, FN9, NO, \ + LCTL, LGUI, LALT, SPC, RALT, FN3, FN3, FN0), + /* Keymap 1: colemak +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ W │ F │ P │ G │ J │ L │ U │ Y │ ; │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│BKSPC│ A │ R │ S │ T │ D │ H │ N │ E │ I │ O │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ K │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_WIN│ APP │ Fn0 │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, W, F, P, G, J, L, U, Y, SCLN, LBRC, RBRC, BSLS, \ + BSPC, A, R, S, T, D, H, N, E, I, O, QUOT, NO, ENT, \ + LSFT, NO, Z, X, C, V, B, K, M, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, FN0), + /* Keymap 2: dvorak +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ [ │ ] │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ ' │ , │ . │ P │ Y │ F │ G │ C │ R │ L │ / │ = │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│CAPSL│ A │ O │ E │ U │ I │ D │ H │ T │ N │ S │ - │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ ; │ Q │ J │ K │ X │ B │ M │ W │ V │ Z │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_WIN│ APP │ FN0 │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC, RBRC, NO, BSPC, \ + TAB, QUOT, COMM, DOT, P, Y, F, G, C, R, L, SLSH, EQL, BSLS, \ + CAPS, A, O, E, U, I, D, H, T, N, S, MINS, NO, ENT, \ + LSFT, NO, SCLN, Q, J, K, X, B, M, W, V, Z, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, FN0), + /* Keymap 3: workman +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ D │ E │ W │ B │ J │ F │ U │ P │ ; │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│BKSPC│ A │ S │ H │ T │ G │ Y │ N │ E │ O │ I │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ M │ C │ V │ K │ L │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_WIN│ APP │ FN0 │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, D, R, W, B, J, F, U, P, SCLN, LBRC, RBRC, BSLS, \ + BSPC, A, S, H, T, G, Y, N, E, O, I, QUOT, NO, ENT, \ + LSFT, NO, Z, X, M, C, V, K, L, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, FN0), + /* Overlay 4: HHKB mode +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│Grave│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│Caps │ │ │ │ │ │ │ │ Psc │ Slk │Pause│ Up │ │ Ins │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│ VoD │ VoU │Mute │ │ │NP_* │NP_/ │Home │PgUp │Left │Right│▒▒▒▒▒│Enter│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ │ │ │ │ │NP_+ │NP_- │ End │PgDwn│Down │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_GUI│L_ALT│█████│█████│█████│Space│█████│█████│█████│R_ALT│R_GUI│ App │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, DEL, \ + CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, SLCK, PAUS, UP, TRNS, INS, \ + LCTL, VOLD, VOLU, MUTE, TRNS, TRNS, PAST, PSLS, HOME, PGUP, LEFT, RGHT, TRNS, ENT, \ + LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS, END, PGDN, DOWN, TRNS, RSFT, TRNS, \ + LCTL, LGUI, LALT, SPC, RALT, RGUI, FN4, TRNS), + /* Overlay 5: Vi mode (Slash) +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│Grave│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│BkSpc│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ Tab │Home │PgDwn│ Up │PgUp │ End │Home │PgDwn│PgUp │ End │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│ │Left │Down │Right│ │Left │Down │ Up │Right│ │ │▒▒▒▒▒│Enter│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ │ │ │ │ │Home │PgDwn│PgUp │ End │ │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_GUI│L_ALT│█████│█████│█████│Space│█████│█████│█████│R_ALT│R_GUI│ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, BSPC, \ + TAB, HOME, PGDN, UP, PGUP, END, HOME, PGDN, PGUP, END, TRNS, TRNS, TRNS, TRNS, \ + LCTL, TRNS, LEFT, DOWN, RGHT, TRNS, LEFT, DOWN, UP, RGHT, TRNS, TRNS, TRNS, ENT, \ + LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END, TRNS, TRNS, RSFT, TRNS, \ + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL), + /* Overlay 6: Mouse mode (Semicolon/App) +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│Grave│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│BkSpc│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ Tab │ │ │ │ │ │ MwL │ MwD │ MwU │ MwR │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│ │ Ac0 │ Ac1 │ Ac2 │ │ McL │ McD │ McU │ McR │ │ │▒▒▒▒▒│Enter│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSFHT│▒▒▒▒▒│ │ │ │ │ Mb3 │ Mb2 │ Mb1 │ Mb4 │ Mb5 │ │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_GUI│L_ALT│█████│█████│█████│ Mb1 │█████│█████│█████│ │ │ │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel + */ + LEGACY_KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, BSPC, \ + TAB, TRNS, TRNS, TRNS, TRNS, TRNS, WH_L, WH_D, WH_U, WH_R, TRNS, TRNS, TRNS, TRNS, \ + LCTL, TRNS, ACL0, ACL1, ACL2, TRNS, MS_L, MS_D, MS_U, MS_R, TRNS, TRNS, TRNS, ENT, \ + LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, BTN3, BTN2, BTN1, BTN4, BTN5, TRNS, TRNS, RSFT, TRNS, \ + LCTL, LGUI, LALT, BTN1, TRNS, TRNS, TRNS, RCTL), + /* Overlay 7: Layout selector +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ Lq │ Lc │ Ld │ Lw │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ Lq │ Lw │ │ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ Ld │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ Lc │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + +Lq: set Qwerty layout +Lc: set Colemak layout +Ld: set Dvorak layout +Lw: set Workman layout + + */ + LEGACY_KEYMAP( + FN5, FN6, FN7, FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, FN5, FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, FN7, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, FN6, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; + +/* + * Fn action definition + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(4), + [1] = ACTION_LAYER_TAP_KEY(5, KC_SLASH), + [2] = ACTION_LAYER_TAP_KEY(6, KC_SCLN), + [3] = ACTION_LAYER_MOMENTARY(6), + [4] = ACTION_LAYER_MOMENTARY(7), // to Layout selector + [5] = ACTION_DEFAULT_LAYER_SET(0), // set qwerty layout + [6] = ACTION_DEFAULT_LAYER_SET(1), // set colemak layout + [7] = ACTION_DEFAULT_LAYER_SET(2), // set dvorak layout + [8] = ACTION_DEFAULT_LAYER_SET(3), // set workman layout + [9] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRV), +}; diff --git a/keyboards/s60-x/keymaps/hasu/readme.md b/keyboards/s60-x/keymaps/hasu/readme.md new file mode 100644 index 0000000000..64969b616d --- /dev/null +++ b/keyboards/s60-x/keymaps/hasu/readme.md @@ -0,0 +1,4 @@ +### 5. Hasu +This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail. + +(Hasu is the initial creator of the TMK firmware, in case you weren't aware.)
\ No newline at end of file diff --git a/keyboards/s60-x/keymaps/hhkb/keymap.c b/keyboards/s60-x/keymaps/hhkb/keymap.c new file mode 100644 index 0000000000..9afd1247f8 --- /dev/null +++ b/keyboards/s60-x/keymaps/hhkb/keymap.c @@ -0,0 +1,52 @@ +#include "s60-x.h" + +/* + * HHKB Layout + */ +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: Default layer +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │BkSpc│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Fn3 │ ' │▒▒▒▒▒│Enter│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│ Fn │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│▒▒▒▒▒│ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│▒▒▒▒▒│ Alt │ Gui │▒▒▒▒▒│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSLS, GRV, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSPC, \ + LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT, \ + LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, FN0, \ + NO, LGUI, LALT, SPC, NO, RALT, RGUI, NO), + /* 1: HHKB Fn layer +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ Pwr │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │ Ins │ Del │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│Caps │ │ │ │ │ │ │ │ Psc │ Slk │ Pus │ Up │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ VoD │ VoU │ Mut │ Ejc │ │NP_* │NP_/ │Home │PgUp │Left │Right│▒▒▒▒▒│NPEnt│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │ │ │NP_+ │NP_- │ End │PgDwn│Down │▒▒▒▒▒│ │ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│▒▒▒▒▒│ │ │█████│█████│█████│ │█████│█████│█████│▒▒▒▒▒│ │ │▒▒▒▒▒│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, SLCK, PAUS, UP, TRNS, TRNS, \ + TRNS, VOLD, VOLU, MUTE, EJCT, TRNS, PAST, PSLS, HOME, PGUP, LEFT, RGHT, NO, PENT, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS, END, PGDN, DOWN, NO, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; + +/* + * Fn action definition + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), +}; diff --git a/keyboards/s60-x/keymaps/hhkb/readme.md b/keyboards/s60-x/keymaps/hhkb/readme.md new file mode 100644 index 0000000000..2bceb26dd5 --- /dev/null +++ b/keyboards/s60-x/keymaps/hhkb/readme.md @@ -0,0 +1,26 @@ +### 7. HHKB +[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers. +#### 7.0: Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │BkSpc│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Fn3 │ ' │▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│ Fn │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │▒▒▒▒▒│ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│▒▒▒▒▒│ Alt │ Gui │▒▒▒▒▒│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 7.1: HHKB Fn layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Pwr │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │ Ins │ Del │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ │ │ │ │ │ │ │ Psc │ Slk │ Pus │ Up │ │ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ VoD │ VoU │ Mut │ Ejc │ │ * │ / │Home │PgUp │Left │Right│▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │▒▒▒▒▒│ │ │ │ │ │ + │ - │ End │PgDwn│Down │▒▒▒▒▒│ │ │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │▒▒▒▒▒│ │ │█████│█████│█████│ │█████│█████│█████│▒▒▒▒▒│ │ │▒▒▒▒▒│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ diff --git a/keyboards/s60-x/keymaps/iso/keymap.c b/keyboards/s60-x/keymaps/iso/keymap.c new file mode 100644 index 0000000000..43a9c48b05 --- /dev/null +++ b/keyboards/s60-x/keymaps/iso/keymap.c @@ -0,0 +1,48 @@ +#include "s60-x.h" + +/* 0: Main layer +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │▒▒▒▒▒│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │NUHS │ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +*/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: ANSI qwerty */ + LEGACY_KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, NO, \ + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NUHS, ENT , \ + LSFT, BSLS, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, RALT, FN0, APP, RCTL), + +/* 1: Fn layer +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│▒▒▒▒▒│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │Left │Down │Right│ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +*/ + LEGACY_KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ + TRNS, TRNS, UP, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, PGDN, PSCR, SLCK, PAUS, TRNS, \ + TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; diff --git a/keyboards/s60-x/keymaps/iso/readme.md b/keyboards/s60-x/keymaps/iso/readme.md new file mode 100644 index 0000000000..2c06bf86f0 --- /dev/null +++ b/keyboards/s60-x/keymaps/iso/readme.md @@ -0,0 +1,28 @@ +### 2 Standard - ISO +The same as the standard keymap, but with additional ISO keys. + + +#### 2.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │▒▒▒▒▒│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │NUHS │ENTER│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │LSHFT│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 2.1 Fn layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│▒▒▒▒▒│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │Left │Down │Right│ │ │ │ │ │ │ │ │ │ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ diff --git a/keyboards/s60-x/keymaps/jpec/keymap.c b/keyboards/s60-x/keymaps/jpec/keymap.c new file mode 100644 index 0000000000..c8fc133288 --- /dev/null +++ b/keyboards/s60-x/keymaps/jpec/keymap.c @@ -0,0 +1,92 @@ +/* +Copyright 2016 Julien Pecqueur <julien@peclu.net> +Copyright 2016 Felix Uhl <ifreilicht@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "s60-x.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layout 0: Default Layer + * ,-----------------------------------------------------------. + * |` | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Fn1 |Gui |Alt | SpaceFn |Alt |Gui |App |Ctrl| + * `-----------------------------------------------------------' + */ + LEGACY_KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ + LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NUHS, ENT, \ + LSFT, NUBS, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ + FN1, LGUI, LALT, FN0, RALT, RGUI, APP, RCTL), + + /* Layout 1: Function Layer + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + * |-----------------------------------------------------------| + * | |Prv|Ply|Nxt|Stp| | |PUp|Up |PDn| |Slk|Pau|Ins | + * |-----------------------------------------------------------| + * | |Vl-|Mut|Vl+| | |Hom|Lef|Dow|Rig|End| |PEnt | + * |-----------------------------------------------------------| + * | |Prt|Cut|Cop|Pst|Cal| | | | | |CapsLock | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + LEGACY_KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, DEL, \ + TRNS, MPRV, MPLY, MNXT, MSTP, TRNS, TRNS, PGUP, UP, PGDN, TRNS, SLCK, PAUS, INS, \ + TRNS, VOLD, MUTE, VOLU, TRNS, TRNS, HOME, LEFT, DOWN, RGHT, END, TRNS, TRNS, PENT, \ + TRNS, TRNS, PSCR, FN2, FN3, FN4, CALC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CAPS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; + +/* +* Fn action definition +*/ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), /* SpaceFn layout 1 */ + [1] = ACTION_LAYER_MOMENTARY(1), /* Momentary layout 1 */ + [2] = ACTION_MODS_KEY(MOD_LSFT, KC_DEL), /* Cut */ + [3] = ACTION_MODS_KEY(MOD_LCTL, KC_INS), /* Copy */ + [4] = ACTION_MODS_KEY(MOD_LSFT, KC_INS), /* Paste */ +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +}
\ No newline at end of file diff --git a/keyboards/s60-x/keymaps/jpec/readme.md b/keyboards/s60-x/keymaps/jpec/readme.md new file mode 100644 index 0000000000..73318dad72 --- /dev/null +++ b/keyboards/s60-x/keymaps/jpec/readme.md @@ -0,0 +1 @@ +# The default keymap for s60-x
\ No newline at end of file diff --git a/keyboards/s60-x/keymaps/plain/keymap.c b/keyboards/s60-x/keymaps/plain/keymap.c new file mode 100644 index 0000000000..790ac88e73 --- /dev/null +++ b/keyboards/s60-x/keymaps/plain/keymap.c @@ -0,0 +1,25 @@ +#include "s60-x.h" + +/* Main layer: +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_GUI│ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +*/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + LEGACY_KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT, \ + LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL), +}; +const uint16_t PROGMEM fn_actions[] = {}; diff --git a/keyboards/s60-x/keymaps/plain/readme.md b/keyboards/s60-x/keymaps/plain/readme.md new file mode 100644 index 0000000000..ab13323e3b --- /dev/null +++ b/keyboards/s60-x/keymaps/plain/readme.md @@ -0,0 +1,16 @@ +### 4. Plain +Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host. +See [keymap_plain.c](keymap_plain.c) for detail. + +#### 4.0 Plain Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ diff --git a/keyboards/s60-x/keymaps/poker/keymap.c b/keyboards/s60-x/keymaps/poker/keymap.c new file mode 100644 index 0000000000..0a8691792a --- /dev/null +++ b/keyboards/s60-x/keymaps/poker/keymap.c @@ -0,0 +1,180 @@ +#include "s60-x.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT, \ + LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + /* 1: colemak +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ W │ F │ P │ G │ J │ L │ U │ Y │ ; │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│BKSPC│ A │ R │ S │ T │ D │ H │ N │ E │ I │ O │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ K │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, W, F, P, G, J, L, U, Y, SCLN, LBRC, RBRC, BSLS, \ + BSPC, A, R, S, T, D, H, N, E, I, O, QUOT, NO, ENT, \ + LSFT, NO, Z, X, C, V, B, K, M, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + /* 2: dvorak +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ [ │ ] │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ ' │ , │ . │ P │ Y │ F │ G │ C │ R │ L │ / │ = │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│CAPSL│ A │ O │ E │ U │ I │ D │ H │ T │ N │ S │ - │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ ; │ Q │ J │ K │ X │ B │ M │ W │ V │ Z │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC, RBRC, NO, BSPC, \ + TAB, QUOT, COMM, DOT, P, Y, F, G, C, R, L, SLSH, EQL, BSLS, \ + CAPS, A, O, E, U, I, D, H, T, N, S, MINS, NO, ENT, \ + LSFT, NO, SCLN, Q, J, K, X, B, M, W, V, Z, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + /* 3: workman +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ D │ E │ W │ B │ J │ F │ U │ P │ ; │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│BKSPC│ A │ S │ H │ T │ G │ Y │ N │ E │ O │ I │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ M │ C │ V │ K │ L │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, D, R, W, B, J, F, U, P, SCLN, LBRC, RBRC, BSLS, \ + BSPC, A, S, H, T, G, Y, N, E, O, I, QUOT, NO, ENT, \ + LSFT, NO, Z, X, M, C, V, K, L, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + /* 4: Poker with Arrow +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ Up │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ │Left │Down │Right│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, LEFT, DOWN, RGHT), + /* 5: Poker with Esc +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ ESC │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), + /* 6: Poker Fn +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ FnQ │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ FnL │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Tsk │ End │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ FnS │█████│█████│█████│ │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + +Fn: to Fn overlay +FnL: to Layout selector overaly +FnQ: toggle Esc overlay +FnS: toggle Arrow overlay + + */ + LEGACY_KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ + TRNS, FN2, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME, INS, FN4, \ + TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS, FN3, END, TRNS, TRNS, \ + TRNS, TRNS, DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN, DEL, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, FN1, TRNS, TRNS, TRNS, TRNS), + /* 7: Layout selector +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ Lq │ Lc │ Ld │ Lw │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ Lq │ Lw │ │ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ Ld │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ Lc │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + +Lq: set Qwerty layout +Lc: set Colemak layout +Ld: set Dvorak layout +Lw: set Workman layout + + */ + LEGACY_KEYMAP( + FN5, FN6, FN7, FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, FN5, FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, FN7, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, FN6, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + /* Poker Layout */ + [0] = ACTION_LAYER_MOMENTARY(6), // to Fn overlay + [1] = ACTION_LAYER_TOGGLE(4), // toggle arrow overlay + [2] = ACTION_LAYER_TOGGLE(5), // toggle Esc overlay + [3] = ACTION_MODS_KEY(MOD_RCTL|MOD_RSFT, KC_ESC), // Task(RControl,RShift+Esc) + [4] = ACTION_LAYER_MOMENTARY(7), // to Layout selector + [5] = ACTION_DEFAULT_LAYER_SET(0), // set qwerty layout + [6] = ACTION_DEFAULT_LAYER_SET(1), // set colemak layout + [7] = ACTION_DEFAULT_LAYER_SET(2), // set dvorak layout + [8] = ACTION_DEFAULT_LAYER_SET(3), // set workman layout +}; diff --git a/keyboards/s60-x/keymaps/poker/readme.md b/keyboards/s60-x/keymaps/poker/readme.md new file mode 100644 index 0000000000..0d8be9d0f8 --- /dev/null +++ b/keyboards/s60-x/keymaps/poker/readme.md @@ -0,0 +1,31 @@ +### 3 Poker +[keymap_poker.c](keymap_poker.c) emulates original Poker layers +while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys. + + Fn + Esc = ` + Fn + {left, down, up, right} = {home, pgdown, pgup, end} + +#### 3.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Fn │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 3.1 Poker Fn layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ FnQ │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Tsk │ End │▒▒▒▒▒│ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│ Up │▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │█████│█████│█████│ FnS │█████│█████│█████│ Fn │Left │Down │Right│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ diff --git a/keyboards/s60-x/keymaps/poker_bit/keymap.c b/keyboards/s60-x/keymaps/poker_bit/keymap.c new file mode 100644 index 0000000000..7626038f42 --- /dev/null +++ b/keyboards/s60-x/keymaps/poker_bit/keymap.c @@ -0,0 +1,110 @@ +#include "s60-x.h" + +// Poker fix with toggle and bit operation +// Fn + Esc = ` +// Fn + {left, down, up, right} = {home, pgdown, pgup, end} +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ + LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT, \ + LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + /* 4: Poker Default + Fn'd +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│Caps │ Fn2 │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Fn4 │ End │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ Fn1 │█████│█████│█████│ │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + [4] = LEGACY_KEYMAP( + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ + CAPS, FN2, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME, INS, TRNS, \ + TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS, FN4, END, TRNS, TRNS, \ + TRNS, TRNS, DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN, DEL, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, FN1, TRNS, TRNS, TRNS, TRNS), + /* 5: Poker with Arrow +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│PgUp │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ Fn3 │Home │PgDwn│ End │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, TRNS, \ + TRNS, TRNS, TRNS, TRNS, FN3, HOME, PGDN, END), + /* 6: Poker with Esc +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ ESC │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), + /* 7: Poker with Arrow + Fn'd +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ Up │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ │Left │Down │Right│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, LEFT, DOWN, RGHT), +}; +const uint16_t PROGMEM fn_actions[] = { + /* Poker Layout */ + [0] = ACTION_LAYER_BIT_XOR(1, 0b0101, ON_BOTH), // Poker Fn(with fix for Esc) + [1] = ACTION_LAYER_TOGGLE(5), // Poker Arrow toggle + [2] = ACTION_LAYER_TOGGLE(6), // Poker Esc toggle + [3] = ACTION_LAYER_BIT_XOR(1, 0b1101, ON_BOTH), // Poker Fn(with fix for Arrow) + [4] = ACTION_MODS_KEY(MOD_RCTL|MOD_RSFT, KC_ESC), // FN3 Task(RControl,RShift+Esc) +}; diff --git a/keyboards/s60-x/keymaps/poker_bit/readme.md b/keyboards/s60-x/keymaps/poker_bit/readme.md new file mode 100644 index 0000000000..0d8be9d0f8 --- /dev/null +++ b/keyboards/s60-x/keymaps/poker_bit/readme.md @@ -0,0 +1,31 @@ +### 3 Poker +[keymap_poker.c](keymap_poker.c) emulates original Poker layers +while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys. + + Fn + Esc = ` + Fn + {left, down, up, right} = {home, pgdown, pgup, end} + +#### 3.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Fn │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 3.1 Poker Fn layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ FnQ │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Tsk │ End │▒▒▒▒▒│ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│ Up │▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │█████│█████│█████│ FnS │█████│█████│█████│ Fn │Left │Down │Right│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ diff --git a/keyboards/s60-x/keymaps/poker_set/keymap.c b/keyboards/s60-x/keymaps/poker_set/keymap.c new file mode 100644 index 0000000000..09423e75b3 --- /dev/null +++ b/keyboards/s60-x/keymaps/poker_set/keymap.c @@ -0,0 +1,178 @@ +#include "s60-x.h" + +// Poker fix with set(state transition) +// Fn + Esc = ` +// Fn + {left, down, up, right} = {home, pgdown, pgup, end} +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ + LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT, \ + LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + /* 1: Poker with Arrow +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ Up │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ Fn1 │Left │Down │Right│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, TRNS, \ + TRNS, TRNS, TRNS, TRNS, FN1, LEFT, DOWN, RGHT), + /* 2: Poker with Esc +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ ESC │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ Fn2 │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS), + /* 3: Poker with Arrow and Esc +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ Esc │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ Up │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ Fn3 │Left │Down │Right│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, TRNS, \ + TRNS, TRNS, TRNS, TRNS, FN3, LEFT, DOWN, RGHT), + /* 4: Poker Fn'd +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ Fn6 │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Fn8 │ End │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ Fn5 │█████│█████│█████│ Fn4 │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ + TRNS, FN6, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME, INS, TRNS, \ + TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS, FN8, END, TRNS, TRNS, \ + TRNS, TRNS, DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN, DEL, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, FN5, FN4, TRNS, TRNS, TRNS), + /* 5: Poker Fn'd arrow +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ Fn7 │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Fn8 │ End │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│PgUp │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ Fn4 │█████│█████│█████│ Fn5 │Home │PgDwn│ End │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ + TRNS, FN7, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME, INS, TRNS, \ + TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS, FN8, END, TRNS, TRNS, \ + TRNS, TRNS, DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN, DEL, TRNS, PGUP, TRNS, \ + TRNS, TRNS, TRNS, FN4, FN5, HOME, PGDN, END), + /* 6: Poker Fn'd Esc +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│Grave│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ Fn4 │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Fn8 │ End │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ Fn7 │█████│█████│█████│ Fn6 │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ + TRNS, FN4, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME, INS, TRNS, \ + TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS, FN8, END, TRNS, TRNS, \ + TRNS, TRNS, DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN, DEL, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, FN7, FN6, TRNS, TRNS, TRNS), + /* 7: Poker Fn'd Arrow + Esc +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│Grave│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ Fn5 │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Fn8 │ End │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│PgUp │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ Fn6 │█████│█████│█████│ Fn7 │Home │PgDwn│ End │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ + TRNS, FN5, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME, INS, TRNS, \ + TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS, FN8, END, TRNS, TRNS, \ + TRNS, TRNS, DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN, DEL, TRNS, PGUP, TRNS, \ + TRNS, TRNS, TRNS, FN6, FN7, HOME, PGDN, END), +}; + +/* + * Fn action definition + */ +const uint16_t PROGMEM fn_actions[] = { + /* Poker Layout */ + [0] = ACTION_LAYER_SET(4, ON_PRESS), // FN0 move to Fn'd when press + [1] = ACTION_LAYER_SET(5, ON_PRESS), // FN1 move to Fn'd arrow when press + [2] = ACTION_LAYER_SET(6, ON_PRESS), // FN2 move to Fn'd Esc when press + [3] = ACTION_LAYER_SET(7, ON_PRESS), // FN3 move to Fn'd arrow + Esc when press + + //[4] = ACTION_LAYER_CLEAR(ON_RELEASE), // FN4 clear overlay when release + [4] = ACTION_LAYER_SET(0, ON_RELEASE), // FN4 clear overlay when release + [5] = ACTION_LAYER_SET(1, ON_RELEASE), // FN5 move to arrow when release + [6] = ACTION_LAYER_SET(2, ON_RELEASE), // FN6 move to Esc when release + [7] = ACTION_LAYER_SET(3, ON_RELEASE), // FN7 move to arrow + Esc when release + + [8] = ACTION_MODS_KEY(MOD_RCTL|MOD_RSFT, KC_ESC), // FN8 Task(RControl,RShift+Esc) +}; diff --git a/keyboards/s60-x/keymaps/poker_set/readme.md b/keyboards/s60-x/keymaps/poker_set/readme.md new file mode 100644 index 0000000000..0d8be9d0f8 --- /dev/null +++ b/keyboards/s60-x/keymaps/poker_set/readme.md @@ -0,0 +1,31 @@ +### 3 Poker +[keymap_poker.c](keymap_poker.c) emulates original Poker layers +while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys. + + Fn + Esc = ` + Fn + {left, down, up, right} = {home, pgdown, pgup, end} + +#### 3.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Fn │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 3.1 Poker Fn layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ FnQ │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Tsk │ End │▒▒▒▒▒│ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│ Up │▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │█████│█████│█████│ FnS │█████│█████│█████│ Fn │Left │Down │Right│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ diff --git a/keyboards/s60-x/keymaps/spacefn/keymap.c b/keyboards/s60-x/keymaps/spacefn/keymap.c new file mode 100644 index 0000000000..b6dc7ca7eb --- /dev/null +++ b/keyboards/s60-x/keymaps/spacefn/keymap.c @@ -0,0 +1,55 @@ +#include "s60-x.h" + +/* + * SpaceFN + * http://geekhack.org/index.php?topic=51069.0 + */ +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap 0: Default Layer +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│LCTRL│L_GUI│L_ALT│█████│█████│█████Spc/Fn0█████│█████│█████│R_ALT│R_GUI│ APP │RCTRL│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT, \ + LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ + LCTL, LGUI, LALT, FN0, RALT, RGUI, APP, RCTL), + + /* Overlay 1: SpaceFN +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+│ ` │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ Esc │ │ │ │Home │ Up │ End │Pscr │Slck │Pause│ Ins │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │ │ │ │PgUp │Left │Down │Right│ │ │▒▒▒▒▒│ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │▒▒▒▒▒│ │ │ │Space│PgDwn│ ` │ ~ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + LEGACY_KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, DEL, \ + TRNS, TRNS, TRNS, ESC, TRNS, TRNS, TRNS, HOME, UP, END, PSCR, SLCK, PAUS, INS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, SPC, PGDN, GRV, FN1, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; + +/* + * Fn action definition + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), + [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // tilde +}; diff --git a/keyboards/s60-x/keymaps/spacefn/readme.md b/keyboards/s60-x/keymaps/spacefn/readme.md new file mode 100644 index 0000000000..d04bd94865 --- /dev/null +++ b/keyboards/s60-x/keymaps/spacefn/readme.md @@ -0,0 +1,27 @@ +### 6. SpaceFN +This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0). + +#### 6.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ Gui │ Alt │█████│█████│████ Space/Fn ███│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 6.1 SpaceFN layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ` │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │ │ │ │ │Home │ Up │ End │ Psc │ Slk │Pause│ Ins │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │ │ │ │PgUp │Left │Down │Right│ │ │▒▒▒▒▒│ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │▒▒▒▒▒│ │ │ │ │Space│PgDwn│ ` │ ~ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │█████│█████│█████│ Fn │█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md new file mode 100644 index 0000000000..94ce829223 --- /dev/null +++ b/keyboards/s60-x/readme.md @@ -0,0 +1,260 @@ +S60-x keyboard firmware +====================== +DIY compact keyboard designed by VinnyCordeiro for Sentraq. Most of the keymaps are based on GH60 code. This is a port from TMK to QMK based on the [original S60-X Repo](https://github.com/VinnyCordeiro/tmk_keyboard). + +## S60X Resources +- [Massdrop page](https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit?mode=guest_open) + +## Quickstart + +If you just want to test a few layouts, the archive [s60-x_precompiled.zip](s60-x_precompiled.zip) contains pre-compiled .hex-files for all available keymaps. Not all of them are tested. +You only need to flash them onto your keyboard, which is explained below, there's no need to setup a build environment. For a full list + +## Flashing your keyboard +The recommended programs for flashing your keyboard are [Atmel FLIP](http://www.atmel.com/tools/FLIP.aspx) (Windows) and [dfu-programmer](http://dfu-programmer.sourceforge.net/) (Linux/Windows). + +[QMK Firmware Flasher](https://github.com/jackhumbert/qmk_firmware_flasher/releases) may work, as the S60-X keyboard uses the ATMega32U4 microcontroller, but it is untested. Use at your own risk. + +[Easy AVR USB Keyboard Firmware](https://deskthority.net/wiki/Easy_AVR_USB_Keyboard_Firmware) also supports S60-X, but it is completely unrelated to TMK firmware. Use at your own risk. + +**Programming the firmware (Windows)** + +1. download and install FLIP (http://www.atmel.com/tools/FLIP.aspx) +2. connect the keyboard, press the program button on the underside of the board (S1) and wait until it enumerates (you'll hear the "disconnect" and "connect" sound) +3. go to device manager, find the atmega32u4 chip and click "update driver" +4. choose location manually: folder named "usb" inside the installation directory of FLIP +5. once the driver is installed, run flip +6. Device -> Select: choose ATMega32U4 +7. Settings -> Communication -> USB, FLIP should show the signature at this point (58 1E 95 87) +8. File -> Load HEX file: choose the hex firmware: <firmware>.hex +9. click "Run" +10. after programming is done, disconnect the device from USB and connect again. + + +**Programming the firmware (Linux)** + +1. Download and install/compile/unpack dfu-programmer from http://dfu-programmer.sourceforge.net/. +2. Issue the following commands in the command prompt after connecting the device and pressing the programming button (S1). You may need root permissions or udev rules to do that. + 1. `sudo dfu-programmer atmega32u4 erase` + 2. `sudo dfu-programmer atmega32u4 flash <firmware>.hex` + 3. `sudo dfu-programmer atmega32u4 start` +3. The keyboard should start working. If it doesn't, reconnect the cable. + +## Building the firmware + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + + $ make [custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>] + +For a more detailed explanation of the build process and the environment setup, see the ["Getting Started" section](/readme.md#getting-started). + +## List of included Keymaps + +Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. +To define your own keymap, copy the [default keymap template](/quantum/template/keymaps/default) directory into the `keymaps` directory and start modifying the `keymap.c` file. Some options might require you to change the `config.h` or `Makefile` as well, refer to the main documentation for more information on those. +If you want to later merge your finalised keymap into this repository to make it available for everyone, make sure to also modify the `readme.md` in your keymap directory to show a visual version of your keymap. + +Here's a list of the standard layouts that are provided with the precompiled .hex-files. + +### 0 Initial explanations +The █████ blocks on the layouts hides the switch positions that do not exist physically on the PCB. If you feel like hacking the keyboard and adding new keys, those are the positions that can be used. You'll have to modify the [keymap_common.h](keymap_common.h) file for that. + +The ▒▒▒▒▒ blocks hides switch positions not used on this particular layout, but they do exist on the PCB. + +There is no LED support on the PCB at the moment, but I'll let the code for that untouched. + + +### 1 [Standard - ANSI (default layout)](keymaps/default/keymap.c) +The standard keymap is the one that is pre-flashed on the S60-X. + +#### 1.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 1.1 Fn layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │Left │Down │Right│ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + + +### 2 [Standard - ISO](keymaps/iso/keymap.c) +The same as the standard keymap, but with additional ISO keys. + + +#### 2.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │▒▒▒▒▒│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │NUHS │ENTER│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │LSHFT│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 2.1 Fn layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│▒▒▒▒▒│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │Left │Down │Right│ │ │ │ │ │ │ │ │ │ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + + +### 3 Poker +[The poker keymap](keymaps/poker/keymap.c) emulates original Vortex Poker layers +while both [poker_bit](keymaps/poker_bit/keymap.c) and [poker_set](keymap/poker_set/keymap.c) implement the same layout in a slightly different way, fix a minor issue of the original poker Layout and enhance arrow keys. + + Fn + Esc = ` + Fn + {left, down, up, right} = {home, pgdown, pgup, end} + +#### 3.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Fn │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 3.1 Poker Fn layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ FnQ │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Tsk │ End │▒▒▒▒▒│ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│ Up │▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │█████│█████│█████│ FnS │█████│█████│█████│ Fn │Left │Down │Right│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + + +### 4. [Plain](keymaps/plain/keymap.c) +Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host. + +#### 4.0 Plain Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + + +### 5. [Hasu](keymaps/hasu/keymap.c) +This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. + +(Hasu is the creator of the TMK firmware, for those who do not know that.) + + +### 6. [SpaceFN](keymaps/spacefn/keymap.c) +This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. Check the sourcefile and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0) for more information. + +#### 6.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ Gui │ Alt │█████│█████│████ Space/Fn ███│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 6.1 SpaceFN layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ` │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │ │ │ │ │Home │ Up │ End │ Psc │ Slk │Pause│ Ins │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │ │ │ │PgUp │Left │Down │Right│ │ │▒▒▒▒▒│ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │▒▒▒▒▒│ │ │ │ │Space│PgDwn│ ` │ ~ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ │ │█████│█████│█████│ Fn │█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + + +### 7. [HHKB](keymap/hhkb/keymap.c) +The HHKB keymap emulates original HHKB layers. +#### 7.0: Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │BkSpc│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Fn3 │ ' │▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│ Fn │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │▒▒▒▒▒│ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│▒▒▒▒▒│ Alt │ Gui │▒▒▒▒▒│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ +#### 7.1: HHKB Fn layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ Pwr │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │ Ins │ Del │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ │ │ │ │ │ │ │ Psc │ Slk │ Pus │ Up │ │ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │ VoD │ VoU │ Mut │ Ejc │ │ * │ / │Home │PgUp │Left │Right│▒▒▒▒▒│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ │▒▒▒▒▒│ │ │ │ │ │ + │ - │ End │PgDwn│Down │▒▒▒▒▒│ │ │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │▒▒▒▒▒│ │ │█████│█████│█████│ │█████│█████│█████│▒▒▒▒▒│ │ │▒▒▒▒▒│█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + + +### 8 [Custom](keymaps/custom/keymap.c) +The custom keymap is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys. + +#### 8.0 Default layer + ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┠+ │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │PgUp │BkSpc│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │PgDwn│Enter│█████│ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Shift│Home │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ End │Shift│ Up │ + ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ + └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + +### 9. [ANSI_QWERTZ](keymaps/ansi_qwertz/keymap.c) + +This keymap was designed for inputting characters with diacritics with ANSI keycaps. +It provides toggleable SpaceFn functionality, a dedicated arrow cluster and a microphone mute key on the function layer as well as a bootloader reset key. + +For more info, [check here](keymaps/ansi_qwertz/readme.md). diff --git a/keyboards/s60-x/rules.mk b/keyboards/s60-x/rules.mk new file mode 100644 index 0000000000..7ec93933a9 --- /dev/null +++ b/keyboards/s60-x/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6
\ No newline at end of file diff --git a/keyboards/s60-x/s60-x.c b/keyboards/s60-x/s60-x.c new file mode 100644 index 0000000000..417358140c --- /dev/null +++ b/keyboards/s60-x/s60-x.c @@ -0,0 +1,28 @@ +#include "s60-x.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h new file mode 100644 index 0000000000..29a2a27b22 --- /dev/null +++ b/keyboards/s60-x/s60-x.h @@ -0,0 +1,69 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> +Copyright 2015 Vinícius Nery Cordeiro <vinicius.nery.cordeiro@gmail.com> +Copyright 2016 Felix Uhl <ifreilicht@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef S60X_H +#define S60X_H + +#include "quantum.h" + +#ifdef __INTELLISENSE__ +#define PROGMEM +#include "config.h" +#endif + +/* S60-X keymap definition macro +* K31 is the extra key next to short left ISO shift +* K2C is the moved key next to enter on ISO boards +* K3C is the extra key next to short right JIS shift +* K0D is extra key from split backspace +* K3E is extra key from HHKB-style split right shift +*/ + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO } \ +} + +/*This special definition is used for S60-X keymaps that were ported from TMK + * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended + */ +#define LEGACY_KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO } \ +} + +#endif diff --git a/keyboards/s60-x/s60-x_precompiled.zip b/keyboards/s60-x/s60-x_precompiled.zip Binary files differnew file mode 100644 index 0000000000..00d99ca8a1 --- /dev/null +++ b/keyboards/s60-x/s60-x_precompiled.zip diff --git a/keyboards/satan/Makefile b/keyboards/satan/Makefile index a0879fc9c9..4e2a6f00fd 100644 --- a/keyboards/satan/Makefile +++ b/keyboards/satan/Makefile @@ -1,70 +1,3 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/satan/keymaps/default/keymap.c b/keyboards/satan/keymaps/default/keymap.c index 3806137e78..2bf49d2e65 100644 --- a/keyboards/satan/keymaps/default/keymap.c +++ b/keyboards/satan/keymaps/default/keymap.c @@ -27,7 +27,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | * `-----------------------------------------------------------' */ -[_BL] = KEYMAP( +[_BL] = KEYMAP_ANSI( F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ @@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | * `-----------------------------------------------------------' */ -[_FL] = KEYMAP( +[_FL] = KEYMAP_ANSI( #ifdef RGBLIGHT_ENABLE KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \ diff --git a/keyboards/satan/keymaps/denolfe/Makefile b/keyboards/satan/keymaps/denolfe/Makefile new file mode 100644 index 0000000000..c4adab737c --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/Makefile @@ -0,0 +1,20 @@ + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/denolfe/README.md b/keyboards/satan/keymaps/denolfe/README.md new file mode 100644 index 0000000000..30b94fcdd2 --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/README.md @@ -0,0 +1,12 @@ +# denolfe's Layout +Customized Satan keymap + + + +## Programming Instructions: +`cd` into keymap directory, `make dfu` + +## Features +- Movement keys with <kbd>CapsLock</kbd> + <kbd>h</kbd>, <kbd>j</kbd>, <kbd>k</kbd>, <kbd>l</kbd> +- Media Keys +- Backlight control diff --git a/keyboards/satan/keymaps/denolfe/keyboard-layout.png b/keyboards/satan/keymaps/denolfe/keyboard-layout.png Binary files differnew file mode 100644 index 0000000000..d6d6ad57fb --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/keyboard-layout.png diff --git a/keyboards/satan/keymaps/denolfe/keymap.c b/keyboards/satan/keymaps/denolfe/keymap.c new file mode 100644 index 0000000000..5f189d78a3 --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/keymap.c @@ -0,0 +1,171 @@ +#include "satan.h" + +#ifdef RGBLIGHT_ENABLE +#include "rgblight.h" +#endif + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _SL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_RGUI, KC_RCTL), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP_ANSI( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #else + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_PGUP, KC_TRNS, KC_END, KC_MPRV, KC_MNXT, KC_MPLY, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, KC_HOME, LCTL(KC_LEFT), LCTL(KC_END), LCTL(KC_RIGHT), KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, F(9), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #endif + +[_SL] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_PGUP, KC_TRNS, LSFT(KC_END), KC_MPRV, KC_MNXT, KC_MPLY, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LSFT(KC_LEFT), LSFT(KC_DOWN), LSFT(KC_UP), LSFT(KC_RIGHT), KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, LSFT(KC_HOME), LCTL(LSFT(KC_LEFT)), LCTL(LSFT(KC_END)), LCTL(LSFT(KC_RIGHT)), KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; + +enum function_id { + SHIFT_ESC, + #ifdef RGBLIGHT_ENABLE + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL + #endif +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), + #ifdef RGBLIGHT_ENABLE + [1] = ACTION_FUNCTION(RGBLED_TOGGLE), + [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + #endif + [9] = ACTION_LAYER_MODS(2, MOD_LSFT) +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + //led operations + #ifdef RGBLIGHT_ENABLE + case RGBLED_TOGGLE: + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + #endif + } +} diff --git a/keyboards/satan/keymaps/iso_split_rshift/.gitignore b/keyboards/satan/keymaps/iso_split_rshift/.gitignore new file mode 100644 index 0000000000..4d652661c6 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/.gitignore @@ -0,0 +1,3 @@ +updatemerge.sh +clear_flash.hex +resetboard.sh diff --git a/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg b/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg Binary files differnew file mode 100644 index 0000000000..7616693f9d --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile new file mode 100644 index 0000000000..d1e07da3fc --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile @@ -0,0 +1,16 @@ +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh new file mode 100755 index 0000000000..6b4b4568f5 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh @@ -0,0 +1,42 @@ +#!/bin/bash +# adjust for cpu +# -j 16 gave best result on a hyperthreaded quad core core i7 + +LIMIT=10 +THREADS="-j 16" +KMAP=iso_split_rshift + +echo "We need sudo later" +sudo ls 2>&1 /dev/null + +function wait_bootloader { + echo "Waiting for Bootloader..." + local STARTTIME=$(date +"%s") + local REMIND=0 + local EXEC=dfu-programmer + local TARGET=atmega32u4 + while true + do + sudo $EXEC $TARGET get > /dev/null 2>&1 + [ $? -eq 0 ] && break + ENDTIME=$(date +"%s") + DURATION=$(($ENDTIME-$STARTTIME)) + if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] + then + echo "Did you forget to press the reset button?" + REMIND=1 + fi + sleep 1 + done +} +make clean +make KEYMAP=${KMAP} ${THREADS} +if [[ $? -eq 0 ]] +then + echo "please trigger flashing!" + wait_bootloader + sudo make KEYMAP=${KMAP} dfu ${THREADS} +else + echo "make failed" + exit 77 +fi diff --git a/keyboards/satan/keymaps/iso_split_rshift/config.h b/keyboards/satan/keymaps/iso_split_rshift/config.h new file mode 100644 index 0000000000..27c1372da1 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/config.h @@ -0,0 +1,27 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// only change +#undef RGB_DI_PIN +#define RGB_DI_PIN B2 + +#endif diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c new file mode 100644 index 0000000000..cf938e07d5 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -0,0 +1,209 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "satan.h" +// TODO: replace your ugly german brckets with #defines + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DEF 0 +#define _SPC 1 +#define _TAB 2 +#define _SFX 3 + +// dual-role shortcuts +#define TABDUAL LT(_TAB, KC_TAB) +#define CAPSDUAL CTL_T(KC_ESC) +#define SPACEDUAL LT(_SPC, KC_SPACE) +#define ENTERDUAL CTL_T(KC_ENT) +// arrow cluster duality bottom right corner +#define ARRLEFT ALT_T(KC_LEFT) +#define ARRDOWN GUI_T(KC_DOWN) +#define ARRUP SFT_T(KC_UP) +#define ARRRIGHT CTL_T(KC_RIGHT) +// german brackets +#define GER_CUR_L RALT(KC_7) // [ +#define GER_CUR_R RALT(KC_0) // ] +#define GER_PAR_L LSFT(KC_8) // ( +#define GER_PAR_R LSFT(KC_9) // ) +#define GER_ANG_L KC_NUBS // < +#define GER_ANG_R LSFT(KC_NUBS) // > +#define GER_BRC_L RALT(KC_8) // [ +#define GER_BRC_R RALT(KC_9) // ] + +// increase readability +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _DEF: Default Layer + * ,-----------------------------------------------------------. + * |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 + * |-----------------------------------------------------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | + * |-----------------------------------------------------------| + * |Sft | < | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP + * |-----------------------------------------------------------| + * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is + * `-----------------------------------------------------------' LEFT DWN RIGHT + */ + [_DEF] = KEYMAP_ISO_SPLITRSHIFT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + TABDUAL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + CAPSDUAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, ENTERDUAL, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, ARRUP, TG(_SFX), \ + KC_LCTL, KC_LGUI, KC_LALT, SPACEDUAL, KC_RALT, ARRLEFT, ARRDOWN, ARRRIGHT), + + /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) + * ,-----------------------------------------------------------. + * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete| + * |-----------------------------------------------------------| + * | |Paus| Up| [ | ] | | | | ( | ) | | | | | + * |-----------------------------------------------------------| + * | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY | + * |-----------------------------------------------------------| + * | | | | | < | > | |M0 | | | | | Vol+ | | + * |-----------------------------------------------------------| + * | | | | |Alt |Prev|Vol-|Next| + * `-----------------------------------------------------------' + */ + [_SPC] = KEYMAP_ISO_SPLITRSHIFT( + KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, KC_PAUS, KC_UP, GER_BRC_L, GER_BRC_R, _______, _______, GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \ + _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \ + _______, _______, _______, _______, GER_ANG_L, GER_ANG_R, KC_SPACE, M(0), _______, _______, _______, _______, KC_VOLU, _______, \ + _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), + + /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) + * ,-----------------------------------------------------------. + * |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE + * |-----------------------------------------------------------| + * | | | | | | | | | { | } | | | | | + * |-----------------------------------------------------------| + * | | | | | | |Pos1|PgDn|PgUp|End| | |Retrn | + * |-----------------------------------------------------------| + * | | | | | | | |AF2| | | | | PgUp | | + * |-----------------------------------------------------------| + * | | | | |Alt |Pos1|PgDn|End | + * `-----------------------------------------------------------' + */ + [_TAB] = KEYMAP_ISO_SPLITRSHIFT( + KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \ + _______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), + + /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) + * ,-----------------------------------------------------------. + * |RSET| | | | | | | 7| 8| 9| | | |Backsp | + * |-----------------------------------------------------------| + * | | | | | | | | 4 | 5 | 6 | | | | \ | + * |-----------------------------------------------------------| + * | | L | L | | | | | 1 | 2 | 3 | | | Return | + * |-----------------------------------------------------------| + * | | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent + * |-----------------------------------------------------------| LED controlling + * |Ctrl|Win |Alt | |Alt |Left|Down|Right| + * `-----------------------------------------------------------' + */ + [_SFX] = KEYMAP_ISO_SPLITRSHIFT( + RESET, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, KC_BSPC, \ + _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, KC_BSLS, \ + _______, F(2), F(3), _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, XXXXXXX, KC_ENT, \ + _______, F(4), F(5), F(6), F(7), F(8), F(9), _______, _______, KC_0, _______, KC_SLSH, KC_UP, _______, \ + _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT), +}; + +enum function_id { + LAUNCH, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_FUNCTION(LAUNCH), + [2] = ACTION_FUNCTION(RGBLED_TOGGLE), + [3] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [4] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [5] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [6] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [8] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [9] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + return (record->event.pressed ? + MACRO( D(RALT), T(SPC), U(RALT), END ) + :MACRO( END )); + break; + case 1: + return (record->event.pressed ? + MACRO( D(LALT), T(F2), U(LALT), END ) + :MACRO( END )); + break; + } + return MACRO_NONE; +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + } +} diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md new file mode 100644 index 0000000000..ec6123d8a7 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -0,0 +1,36 @@ +toneman77's Satan Layout +===================== + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +* heavily modified ISO (!) layout with split right shift key +* spaceFn +* Dual-Role keys: +* + | Original key | when tapped | when held | + | ---------------- | ------------- | ------------- | + | Space | Space | layer change | + | Caps lock | Escape | Control | + | Tab | Tab | layer change | + | Enter | Enter | Control | + +* Lockable layer for LED functions and numpad +* vim-style arrow keys on hjkl (spacefn layer) +* corresponding Home/PgDn/PgUp/End on hjkl (tab layer) +* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift +* more bonus arrow keys on wasd (spacefn layer) +* media keys prev/next/play/vol+/vol- (spacefn layer) +* firmware bootloader button +* WS2812 RGB Underglow Support (not needed anymore to solder directly to the atmega) +* additional brackets that only work in german layout due to horrible placement +in the default qwertz layout + + +### Additional Credits +* Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan) +* nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) +* no-need-to-solder-on-chip picture: + +* special thanks to /u/TerryMathews who suggested the pin PB2, so soldering +directly on the atmega is not needed anymore. Happened on [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/4ghq9z/photos_satan_rgb60_w1976/d2k5tra) diff --git a/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh b/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh new file mode 100755 index 0000000000..d955ccf545 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh @@ -0,0 +1,4 @@ +#!/bin/bash +sudo dfu-programmer atmega32u4 erase --force +sudo dfu-programmer atmega32u4 flash clear_flash.hex +sudo dfu-programmer atmega32u4 reset diff --git a/keyboards/satan/keymaps/poker/keymap.c b/keyboards/satan/keymaps/poker/keymap.c index 8181955cf9..9da7d29b78 100644 --- a/keyboards/satan/keymaps/poker/keymap.c +++ b/keyboards/satan/keymaps/poker/keymap.c @@ -25,12 +25,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | * `-----------------------------------------------------------' */ -[_BL] = KEYMAP( - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, MO(_RL), MO(_FL), KC_RCTL), +[_BL] = KEYMAP_ANSI( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_RL), MO(_FL), KC_RCTL), /* Keymap _FL: Function Layer * ,-----------------------------------------------------------. @@ -45,12 +45,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | * `-----------------------------------------------------------' */ -[_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - KC_TRNS,KC_TRNS, KC_UP, KC_TRNS,KC_TRNS,KC_TRNS, KC_CALC,KC_TRNS,KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \ - KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +[_FL] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), /* Keymap _RL: Function Layer * ,-----------------------------------------------------------. @@ -65,19 +65,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | * `-----------------------------------------------------------' */ -[_RL] = KEYMAP( +[_RL] = KEYMAP_ANSI( #ifdef RGBLIGHT_ENABLE - KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), #else - KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), #endif }; diff --git a/keyboards/satan/keymaps/stanleylai/keymap.c b/keyboards/satan/keymaps/stanleylai/keymap.c index 623427e97c..979c122e55 100644 --- a/keyboards/satan/keymaps/stanleylai/keymap.c +++ b/keyboards/satan/keymaps/stanleylai/keymap.c @@ -26,25 +26,25 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Function layer [_FL] = KEYMAP_HHKB( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_NO, \ - KC_NO, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, LT(_RGBL, KC_PGUP), KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_HOME, KC_PGDN, KC_END), + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_NO, \ + KC_NO, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, LT(_RGBL, KC_PGUP), KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_HOME, KC_PGDN, KC_END), // RGB Layer [_RGBL] = KEYMAP_HHKB( #ifdef RGBLIGHT_ENABLE RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_TRNS, KC_TRNS,\ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), #else RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS,\ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), #endif }; diff --git a/keyboards/satan/rules.mk b/keyboards/satan/rules.mk new file mode 100644 index 0000000000..1102584d8a --- /dev/null +++ b/keyboards/satan/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/satan/satan.h b/keyboards/satan/satan.h index 513446bf37..f3cbd5305e 100644 --- a/keyboards/satan/satan.h +++ b/keyboards/satan/satan.h @@ -3,15 +3,18 @@ #include "quantum.h" -/* Satan GH60 matrix layout +// readability +#define XXX KC_NO + +/* Satan GH60 matrix layout (3c is right of 3d, 3d is shift) * ,-----------------------------------------------------------. - * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49| * |-----------------------------------------------------------| * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | * |-----------------------------------------------------------| - * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d | * |-----------------------------------------------------------| - * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c | * |-----------------------------------------------------------| * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | * `-----------------------------------------------------------' @@ -19,18 +22,45 @@ // The first section contains all of the arguments // The second converts the arguments into a two-dimensional array #define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \ +} +/* Satan GH60 ANSI layout + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |-----------------------------------------------------------| + * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +#define KEYMAP_ANSI( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ k40, k41, k42, k45, k4a, k4b, k4c, k4d \ ) \ { \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ - {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d}, \ - {k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3d}, \ - {k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d} \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ } /* Satan HHKB matrix layout @@ -51,17 +81,46 @@ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ k40, k41, k42, k45, k4a, k4b, k4c, k4d \ ) \ { \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ - {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d}, \ - {k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ - {k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k4a, k4b, k4c, k4d} \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \ } +/* ISO w/ split right shift key matrix layout + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d | + * |-----------------------------------------------------------| + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c| + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + + swap 3c and 3d. 3c is right of 3d in reality + */ +#define KEYMAP_ISO_SPLITRSHIFT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ +} void matrix_init_user(void); void matrix_scan_user(void); diff --git a/keyboards/sixkeyboard/Makefile b/keyboards/sixkeyboard/Makefile index 6f273064a7..4e2a6f00fd 100644 --- a/keyboards/sixkeyboard/Makefile +++ b/keyboards/sixkeyboard/Makefile @@ -1,75 +1,3 @@ - - -SRC = matrix.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega16u2 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no # Commands for debug and configuration -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -CUSTOM_MATRIX = yes - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - +endif
\ No newline at end of file diff --git a/keyboards/sixkeyboard/rules.mk b/keyboards/sixkeyboard/rules.mk new file mode 100644 index 0000000000..2c99985a97 --- /dev/null +++ b/keyboards/sixkeyboard/rules.mk @@ -0,0 +1,70 @@ + + +SRC = matrix.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega16u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +CUSTOM_MATRIX = yes
\ No newline at end of file diff --git a/keyboards/tv44/Makefile b/keyboards/tv44/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/tv44/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/tv44/config.h b/keyboards/tv44/config.h new file mode 100644 index 0000000000..0ae93c0957 --- /dev/null +++ b/keyboards/tv44/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEAE +#define PRODUCT_ID 0x8844 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Evan Sailer +#define PRODUCT TheVan 44 +#define DESCRIPTION keyboard firmware for TV44 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D7, B5, F7, D4 } +#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/tv44/keymaps/default/Makefile b/keyboards/tv44/keymaps/default/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/tv44/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/tv44/keymaps/default/config.h b/keyboards/tv44/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/tv44/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/tv44/keymaps/default/keymap.c b/keyboards/tv44/keymaps/default/keymap.c new file mode 100644 index 0000000000..f3f989f2d1 --- /dev/null +++ b/keyboards/tv44/keymaps/default/keymap.c @@ -0,0 +1,97 @@ +#include "tv44.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _QW 0 +#define _DV 1 +#define _CM 2 +#define _L1 3 +#define _L2 4 +#define _L3 5 + +// Macro name shortcuts +#define QWERTY M(_QW) +#define DVORAK M(_DV) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QW] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MO(_L1) }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) }, + {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } + }, + [_DV] = { /* Dvorak */ + {KC_TAB, KC_SLSH, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC }, + {MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, MO(_L1) }, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, MO(_L2) }, + {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } + }, + [_CM] = { /* Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, + {MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, MO(_L1) }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) }, + {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } + }, + [_L1] = { /* LAYER 1 */ + {KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, + {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ }, + {_______, KC_ESC, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT }, + {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ } + }, + [_L2] = { /* LAYER 2 */ + {_______, QWERTY, DVORAK, COLEMAK, _______, _______, _______, KC_7, KC_8, KC_9, KC_0, _______ }, + {KC_ESC, KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4, KC_5, KC_6, KC_VOLU, KC_ENT }, + {_______, _______, _______, _______, _______, _______, KC_0, KC_1, KC_2, KC_3, KC_VOLD, _______ }, + {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ } + }, + [_L3] = { /* LAYER 3 */ + {_______, _______, _______, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, _______ }, + {KC_ESC, _______, _______, _______, _______, _______, _______, KC_F5, KC_F6, KC_F7, KC_F8, _______ }, + {KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_F9, KC_F10, KC_F11, KC_F12, _______ }, + {_______, KC_LSFT, KC_B, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_C, _______, _______, XXXXXXX, _______ } + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/tv44/keymaps/default/readme.md b/keyboards/tv44/keymaps/default/readme.md new file mode 100644 index 0000000000..ac84c08cfa --- /dev/null +++ b/keyboards/tv44/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for tv44
\ No newline at end of file diff --git a/keyboards/tv44/keymaps/jeebak/Makefile b/keyboards/tv44/keymaps/jeebak/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/tv44/keymaps/jeebak/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/tv44/keymaps/jeebak/config.h b/keyboards/tv44/keymaps/jeebak/config.h new file mode 100644 index 0000000000..a59ef2b70a --- /dev/null +++ b/keyboards/tv44/keymaps/jeebak/config.h @@ -0,0 +1,21 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/** + *TV44 keymap definition macro + */ +#define KEYMAP_TV44( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, \ + K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, \ + K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, \ + K37, K38, K39, K40, K41, K42, K43, K44 \ +) { \ + { K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, }, \ + { K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, }, \ + { K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, }, \ + { K37, K38, K39, K40, KC_NO, KC_NO, KC_NO, K41, K42, K43, KC_NO, K44 } \ +} + +#endif diff --git a/keyboards/tv44/keymaps/jeebak/keymap.c b/keyboards/tv44/keymaps/jeebak/keymap.c new file mode 100644 index 0000000000..1bb1015c36 --- /dev/null +++ b/keyboards/tv44/keymaps/jeebak/keymap.c @@ -0,0 +1,425 @@ +#include "tv44.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _TOUCHCURSOR 6 +#define _MOUSECURSOR 7 +#define _ADJUST 16 + +// Keycodes +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +enum macro_keycodes { + KC_ALT_TAB, + KC_CMD_TAB, + KC_CTL_TAB, + KC_CMD_SLSH, + KC_AG_FIND, + KC_AG_AGAIN, + KC_AG_UNDO, + KC_AG_CUT, + KC_AG_COPY, + KC_AG_PASTE, + KC_AG_DESK_L, + KC_AG_DESK_R, + KC_AG_TAB_C, + KC_AG_TAB_N, + KC_AG_TAB_R, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper +#define GUI_SEM GUI_T(KC_SCLN) // Tap for Semicolon, hold for GUI +#define ALT_QUO ALT_T(KC_QUOT) // Tap for Quote, hold for Alt +// Requires KC_TRNS/_______ for the trigger key in the destination layer +#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor +#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor +#define ALT_TAB M(KC_ALT_TAB) // Macro for Alt-Tab +#define CMD_TAB M(KC_CMD_TAB) // Macro for Cmd-Tab +#define CTL_TAB M(KC_CTL_TAB) // Macro for Ctl-Tab +#define CMD_SLSH M(KC_CMD_SLSH) // Macro for Cmd-Slash (personal shortcut to toggle iTerm2 visibility) +#define AG_FIND M(KC_AG_FIND) // Macros for Cmd-[x] vs Ctrl-[x] based on current AG_NORM or AG_SWAP settings +#define AG_AGAIN M(KC_AG_AGAIN) +#define AG_UNDO M(KC_AG_UNDO) +#define AG_CUT M(KC_AG_CUT) +#define AG_COPY M(KC_AG_COPY) +#define AG_PASTE M(KC_AG_PASTE) +#define AG_D_L M(KC_AG_DESK_L) // For Virtual Desktop Switching: Left, and +#define AG_D_R M(KC_AG_DESK_R) // Right +#define AG_T_C M(KC_AG_TAB_C) // For Chrome, etc. Tab Close, +#define AG_T_N M(KC_AG_TAB_N) // Tab New, and +#define AG_T_R M(KC_AG_TAB_R) // Tab Reopen Closed + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * + * ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + * |Hyper/Tab| Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |---------`------`------`------`------`------`------`------`------`------`------`-------------| + * | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L |GUI/; | Alt/" | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | Shift | Z | X | C | V | B | N | M | , | . | / | Sft/Ent | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol+ | Play | + * `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' + */ +[_QWERTY] = KEYMAP_TV44( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ + HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ + CTL_ESC , KC_A, KC_S,LT_MC(KC_D), KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, GUI_SEM, ALT_QUO , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + KC_LALT , KC_LGUI , LOWER , LT_TC , LT_TC , RAISE , KC_VOLU , KC_MPLY ), +/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/ + +/* Colemak + * ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + * |Hyper/Tab| Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |---------`------`------`------`------`------`------`------`------`------`------`-------------| + * | Ctrl/Esc | A | R | MC/S | T | D | H | N | E | I | O | " | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | Shift | Z | X | C | V | B | K | M | , | . | / | Sft/Ent | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol+ | Play | + * `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' + */ +[_COLEMAK] = KEYMAP_TV44( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ + HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ + CTL_ESC , KC_A, KC_R,LT_MC(KC_S), KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + KC_LALT , KC_LGUI , LOWER , LT_TC , LT_TC , RAISE , KC_VOLU , KC_MPLY ), +/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/ + +/* Dvorak + * ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + * |Hyper/Tab| " | , | . | P | Y | F | G | C | R | L | Bksp | + * |---------`------`------`------`------`------`------`------`------`------`------`-------------| + * | Ctrl/Esc | A | O | MC/E | U | I | D | H | T | N | S | / | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | Shift | ; | Q | J | K | X | B | M | W | V | Z | Sft/Ent | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol+ | Play | + * `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' + */ +[_DVORAK] = KEYMAP_TV44( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ + HPR_TAB,KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ + CTL_ESC , KC_A, KC_O,LT_MC(KC_E), KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + KC_LSFT , KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + KC_LALT , KC_LGUI , LOWER , LT_TC , LT_TC , RAISE , KC_VOLU , KC_MPLY ), +/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/ + +/* Lower + * ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |---------`------`------`------`------`------`------`------`------`------`------`-------------| + * | [ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | "|" | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | ] | F7 | F8 | F9 | F10 | F11 | F12 | - | = | [ | ] | \ | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | Brite | | | | | | Vol- | Mute | + * `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' + */ +[_LOWER] = KEYMAP_TV44( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ + KC_TILD,KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ + KC_LBRC , KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + KC_RBRC , KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + BACKLIT , _______ , _______ , _______ , _______ , _______ , KC_VOLD , KC_MUTE ), +/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/ + +/* Raise + * ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |---------`------`------`------`------`------`------`------`------`------`------`-------------| + * | $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | "|" | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | Brite | | | | | | Vol- | Mute | + * `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' + */ +[_RAISE] = KEYMAP_TV44( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ + KC_0 , KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ + KC_DLR , KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_DOT, KC_4, KC_5, KC_6, KC_ASTR, KC_PIPE , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + KC_EQL , KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_DOT, KC_1, KC_2, KC_3, KC_SLSH, KC_BSLS , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + BACKLIT , _______ , _______ , _______ , _______ , _______ , KC_VOLD , KC_MUTE ), +/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/ + +/* TouchCursor layer (http://martin-stone.github.io/touchcursor/) plus personal customizations + * ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + * | AltTab |CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | + * |---------`------`------`------`------`------`------`------`------`------`------`-------------| + * | | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L| Desk_R | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | | | | | | | | | + * `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' + * + * The KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND, and KC_AGAIN keycodes don't + * seem to work on Mac. Presumably they'll work under Windows. + */ + +[_TOUCHCURSOR] = KEYMAP_TV44( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ + ALT_TAB,CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______ , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ + _______ ,KC_LALT, KC_SPC, AG_T_C, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, AG_D_L, AG_D_R , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + _______ ,AG_UNDO, AG_CUT, AG_COPY,AG_PASTE, KC_GRV, KC_PGDN, KC_DEL, AG_T_N, AG_T_R,CMD_SLSH, _______ , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ ), +/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/ + +/* Mouse Layer + * ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + * | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | | + * |---------`------`------`------`------`------`------`------`------`------`------`-------------| + * | |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | | | | | | | | | + * `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' + */ + +[_MOUSECURSOR] = KEYMAP_TV44( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ + _______,_______, KC_ACL0, _______, _______, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______ , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ + _______ ,KC_ACL2, KC_BTN2, _______, KC_BTN1, KC_ACL1, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4, KC_BTN5 , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + _______ ,_______, _______, _______, KC_BTN3, _______, KC_WH_D, KC_BTN1, _______, _______, KC_BTN3, _______ , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ ), +/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/ + +/* Plover layer (http://opensteno.org) + * ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |---------`------`------`------`------`------`------`------`------`------`------`-------------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | TogOut | S | K | W | R | * | * | R | B | G | S | Z | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | Exit | A | O | | | E | U | | + * `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' + */ + +[_PLOVER] = KEYMAP_TV44( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ + KC_1 , KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ + XXXXXXX , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + XXXXXXX , KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + EXT_PLV , KC_C , KC_V , XXXXXXX , XXXXXXX , KC_N , KC_M , XXXXXXX ), +/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/ + +/* Adjust (Lower + Raise) + * ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + * | | | | | | | | | | | | Del | + * |---------`------`------`------`------`------`------`------`------`------`------`-------------| + * | | | | | |AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |----------`------`------`------`------`------`------`------`------`------`------`------------| + * | | | | | | | | | | | | | + * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + * | | | | | | | | Reset | + * `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' + */ +[_ADJUST] = KEYMAP_TV44( +/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ + _______,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL , +/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ + _______ ,_______, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______ , +/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ + _______ ,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ , +/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ + _______ , _______ , _______ , _______ , _______ , _______ , _______ , RESET ) +/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/ +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + bool use_cmd = true; // Use, for example, Cmd-Tab, Cmd-C, Cmd-V, etc. + // Compare to MAGIC_SWAP_ALT_GUI and MAGIC_UNSWAP_ALT_GUI configs, set in: + // quantum/quantum.c + if(keymap_config.swap_lalt_lgui == 1 && keymap_config.swap_ralt_rgui == 1) { + use_cmd = false; // ... or, Alt-Tab, Ctrl-C, Ctrl-V, etc. + } + + switch (id) { + case KC_ALT_TAB: + if(use_cmd) { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } + else { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } + case KC_CMD_TAB: + if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } + else { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } + + case KC_CTL_TAB: + return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END )); + case KC_CMD_SLSH: + return (record->event.pressed ? MACRO( D(LGUI), D(SLSH),END ) : MACRO( U(SLSH),END )); + + case KC_AG_FIND: + return use_cmd ? MACRODOWN( D(LGUI), T(F), END ) : MACRODOWN( D(LCTRL), T(F), END ); + case KC_AG_AGAIN: + return use_cmd ? MACRODOWN( D(LGUI), T(G), END ) : MACRODOWN( D(LCTRL), T(G), END ); + case KC_AG_UNDO: + return use_cmd ? MACRODOWN( D(LGUI), T(Z), END ) : MACRODOWN( D(LCTRL), T(Z), END ); + case KC_AG_CUT: + return use_cmd ? MACRODOWN( D(LGUI), T(X), END ) : MACRODOWN( D(LCTRL), T(X), END ); + case KC_AG_COPY: + return use_cmd ? MACRODOWN( D(LGUI), T(C), END ) : MACRODOWN( D(LCTRL), T(C), END ); + case KC_AG_PASTE: + return use_cmd ? MACRODOWN( D(LGUI), T(V), END ) : MACRODOWN( D(LCTRL), T(V), END ); + + case KC_AG_DESK_L: + return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(SCLN), END ) : MACRODOWN( D(LALT), D(LCTRL), T(SCLN), END ); + case KC_AG_DESK_R: + return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(QUOT), END ) : MACRODOWN( D(LALT), D(LCTRL), T(QUOT), END ); + + case KC_AG_TAB_C: + return use_cmd ? MACRODOWN( D(LGUI), T(W), END ) : MACRODOWN( D(LCTRL), T(W), END ); + case KC_AG_TAB_N: + return use_cmd ? MACRODOWN( D(LGUI), T(T), END ) : MACRODOWN( D(LCTRL), T(T), END ); + case KC_AG_TAB_R: + return use_cmd ? MACRODOWN( D(LGUI), D(LSHIFT), T(T), END ) : MACRODOWN( D(LCTRL), D(LSHIFT), T(T), END ); + } + + return MACRO_NONE; +} diff --git a/keyboards/tv44/keymaps/jeebak/readme.md b/keyboards/tv44/keymaps/jeebak/readme.md new file mode 100644 index 0000000000..43d20958a6 --- /dev/null +++ b/keyboards/tv44/keymaps/jeebak/readme.md @@ -0,0 +1,129 @@ +jeebak's TV44 layout +======================= +NOTE: This is a port of jeebak's planck layout, for tv44. + +This WIP keymap attempts to minimize fingers straying away from the home row. +To aid in this endeavor, when additional modifyer keys to switch layers are +needed, they will be mapped to home row keys. The `keymap.c` file will contain +the exact changes. The diagrams in this README shows the highlights of the +changes from the default mappings. + +I also decided to change all calls to `persistant_default_layer_set()` to +`default_layer_set()` since this is my personal perference. + +## Macros +``` +#define ALT_TAB M(KC_ALT_TAB) +``` + +## Base Layers (Qwerty/Colemak/Dvorak) +These base layers are mostly the same as the default mappings. The interesting +changes are shown below. + +- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held, +- `GUI/;` as `;` and `GUI`, +- `Alt/"` as `"` and `Alt`, +- `Sft/Ent` as `Enter` and `Shift`, and +- `Hyper/Tab` as `Tab` and `Hyper` + +A `TODO` item is to see if it can also act as a `CapsLock` when double-tapped. +The arrow keys, which have been moved to the +[TouchCursor](http://martin-stone.github.io/touchcursor/) layer, have been +replaced with the Media keys as shown. The `MC/kc` key activates the +`MouseCursor` layer when held, and emits the corresponding `kc` for its layer, +when tapped. +``` + ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + |Hyper/Tab| Q | W | E | R | T | Y | U | I | O | P | Bksp | + |---------`------`------`------`------`------`------`------`------`------`------`-------------| + | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L |GUI/; | Alt/" | + |----------`------`------`------`------`------`------`------`------`------`------`------------| + | Shift | Z | X | C | V | B | N | M | , | . | / | Sft/Ent | + |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol+ | Play | + `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' +``` + +## Lower Layer (Symbols and Function Keys) +The symbols and functions keys are essentially the same as the default mapping. +The most notable changes are that the symbol keys from the `RAISE` layer have +been moved here. The remaining Media keys replace those that are now on the +base layers. The `BACKLIT` key has also been moved here. +``` + ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + |---------`------`------`------`------`------`------`------`------`------`------`-------------| + | [ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | "|" | + |----------`------`------`------`------`------`------`------`------`------`------`------------| + | ] | F7 | F8 | F9 | F10 | F11 | F12 | - | = | [ | ] | \ | + |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + | Brite | | | | | | Vol- | Mute | + `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' +``` + +## Raise Layer (Numbers and Arithmetic Operators) +All of the numbers and arithmetic operators are available on this layer. Some +keys are duplicated for the convenience of their positions. The `0` and `$` +keys at the far left are for quick access to beginning and end of line in vim. +``` + ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + |---------`------`------`------`------`------`------`------`------`------`------`-------------| + | $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | "|" | + |----------`------`------`------`------`------`------`------`------`------`------`------------| + | = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ | + |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + | Brite | | | | | | Vol- | Mute | + `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' +``` + +## TouchCursor layer plus personal customizations +[TouchCursor](http://martin-stone.github.io/touchcursor/) uses the `Space` key +as the modifier, with the `IJKL` home row keys representing the inverted-T of +the arrow keys. All of the default TouchCursor keymappings for the right hand +are represented below. My personalizations include all of the keys shown for +the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key +from the base layers) readily accessible from the home row allows quick word +jumps and highlighting when used in conjunction with the arrow keys. The +`Alt-Tab` macro is not only useful under Windows, but also under Mac when used +with alternative switchers like [HyperSwitch](https://bahoom.com/hyperswitch). +The `Cmd-Tab` and `Ctrl-Tab` sequences are duplicated for easy access while in +this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN` +keycodes do not seem to work. There are macros in place that'll "automatically" +choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`, +etc.) depending on which layout you've currently selected (`AG_NORM` or +`AG_SWAP`) in the `_ADJUST` layer. The `Desk_L` and `Desk_R` macros are what I +use to switch between Virtual Desktops Left/Right. The `Tab_C`, `Tab_N` and +`Tab_R` are for "Close Tab," "New Tab" and "Reopen Closed Tab" for apps such as +Google Chrome. +``` + ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + | AltTab |CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | + |---------`------`------`------`------`------`------`------`------`------`------`-------------| + | | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L| Desk_R | + |----------`------`------`------`------`------`------`------`------`------`------`------------| + | | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| | + |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + | | | | | | | | | + `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' +``` + +## Mouse Layer +The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer. +The `D` key (on QWERTY) is used to activate this layer. All 16 keycodes for the +mouse from the `doc/keycode.txt` file are represented, and logically located, +IMHO. The left and right click buttons are duplicated; on the right hand side, +for a quick click here and there, and again on the left hand side for when the +buttons need to be held for dragging things or highlighting text, thus allowing +the right hand to be free to use the up/down/left/right actions. +``` + ,---------+------+------+------+------+------+------+------+------+------+------+-------------. + | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | | + |---------`------`------`------`------`------`------`------`------`------`------`-------------| + | |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 | + |----------`------`------`------`------`------`------`------`------`------`------`------------| + | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | | + |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------| + | | | | | | | | | + `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------' +``` diff --git a/keyboards/tv44/keymaps/xyverz/Makefile b/keyboards/tv44/keymaps/xyverz/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/tv44/keymaps/xyverz/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/tv44/keymaps/xyverz/config.h b/keyboards/tv44/keymaps/xyverz/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/tv44/keymaps/xyverz/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/tv44/keymaps/xyverz/keymap.c b/keyboards/tv44/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..8cbcf8d35a --- /dev/null +++ b/keyboards/tv44/keymaps/xyverz/keymap.c @@ -0,0 +1,92 @@ +#include "tv44.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _DV 0 +#define _QW 1 +#define _CM 2 +#define _L1 3 +#define _L2 4 + +// Macro name shortcuts +#define DVORAK M(_DV) +#define QWERTY M(_QW) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DV] = { /* 0: Dvorak */ + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC }, + {MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT }, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT }, + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + }, + + [_QW] = { /* 1: Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + }, + + [_CM] = { /* 2: Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, + {MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + }, + + [_L1] = {/* 1: FN 1 */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL }, + {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ }, + {_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT }, + {KC_ESC, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ } + }, + + [_L2] = { /* 2: FN 2 */ + {KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_ESC }, + {_______, KC_F11, KC_F12, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT }, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, KC_VOLD, _______ }, + {QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ } + } + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; + + diff --git a/keyboards/tv44/keymaps/xyverz/readme.md b/keyboards/tv44/keymaps/xyverz/readme.md new file mode 100644 index 0000000000..ac84c08cfa --- /dev/null +++ b/keyboards/tv44/keymaps/xyverz/readme.md @@ -0,0 +1 @@ +# The default keymap for tv44
\ No newline at end of file diff --git a/keyboards/tv44/readme.md b/keyboards/tv44/readme.md new file mode 100644 index 0000000000..4f691a4ca0 --- /dev/null +++ b/keyboards/tv44/readme.md @@ -0,0 +1,28 @@ +tv44 keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/tv44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file diff --git a/keyboards/tv44/rules.mk b/keyboards/tv44/rules.mk new file mode 100644 index 0000000000..dbba6bace6 --- /dev/null +++ b/keyboards/tv44/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/tv44/tv44.c b/keyboards/tv44/tv44.c new file mode 100644 index 0000000000..6dc0efd28e --- /dev/null +++ b/keyboards/tv44/tv44.c @@ -0,0 +1,28 @@ +#include "tv44.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/tv44/tv44.h b/keyboards/tv44/tv44.h new file mode 100644 index 0000000000..65c0b45939 --- /dev/null +++ b/keyboards/tv44/tv44.h @@ -0,0 +1,22 @@ +#ifndef TV44_H +#define TV44_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K37, K38, K39, K3A, K3B \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, K33, KC_NO, KC_NO, KC_NO, K37, K38, K39, K3A, K3B } \ + +#endif diff --git a/keyboards/vision_division/Makefile b/keyboards/vision_division/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/vision_division/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/vision_division/Potential Layouts.txt b/keyboards/vision_division/Potential Layouts.txt new file mode 100644 index 0000000000..f715ac8c65 --- /dev/null +++ b/keyboards/vision_division/Potential Layouts.txt @@ -0,0 +1,84 @@ +/* Numeric Max / Numeric Normal - Full Grid + * .-----------------------------------. .--------------------------------------------------------------_--------------------------------------------------------------. .-----------------------------------. + * | | | | | | | | | | | | | | | | | | | | | | | | | + * '-----------------------------------' '-----------------------------------------------------------------------------------------------------------------------------' '-----------------------------------' + * .-----------------------------------. .-----------------------------------------------------------------------------------------------------------------------------. .-----------------------------------. + * | | | | | | | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------| + * | | | | | | | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+--------| o |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------| + * | | | | | o | | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+--------| o |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------| + * | | | | | | | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------| + * | | | | | | | | | | | | | | | | | | | | | | | | | + * '-----------------------------------' '-----------------------------------------------------------------------------------------------------------------------------' '-----------------------------------' + */ + +//* Numeric Max / Homing Normal - Full Grid + * .-----------------------------------. .--------------------------------------------------------------_--------------------------------------------------------------. .--------------------------. + * | | | | | | | | | | | | | | | | | | | | | | | | + * '-----------------------------------' '-----------------------------------------------------------------------------------------------------------------------------' '--------------------------' + * .-----------------------------------. .-----------------------------------------------------------------------------------------------------------------------------. .--------------------------. + * | | | | | | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------| + * | | | | | | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+--------| o |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------| + * | | | | | o | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+--------| o |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------| + * | | | | | | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------| + * | | | | | | | | | | | | | | | | | | | | | | | | + * '-----------------------------------' '-----------------------------------------------------------------------------------------------------------------------------' '--------------------------' + */ + +//* Numeric Max / Homing Normal - Traditional + * .-----------------------------------. .-----------------------------------. .-----------------_-----------------. .-----------------------------------. .--------------------------. + * | | | | | | | | | | | | | | | | | | | | | | | | + * '-----------------------------------' '-----------------------------------' '-----------------------------------' '-----------------------------------' '--------------------------' + * .-----------------------------------. .-----------------------------------------------------------------------------------------------------------------------------. .--------------------------. + * | | | | | | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------| + * | | | | | | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+ | o |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| '--------+--------+--------' + * | | | | | o | | | | | | | | | | | | | | | + * |--------+--------+--------+--------| o |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| .--------. + * | | | | | | | | | | | | | | | | | | | | + * |--------+--------+--------+ | |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| .--------+--------+--------. + * | | | | | | | | | | | | | | | | | | | | | | + * '-----------------------------------' '-----------------------------------------------------------------------------------------------------------------------------' '--------------------------' + */ + +/* Numeric Max / Numeric Normal + * .-----------------------------------. .--------------------------------------------------------------_--------------------------------------------------------------. .-----------------------------------. + * | | | | | | | | | | | | | | | | | | | | | | | | | + * '-----------------------------------' '-----------------------------------------------------------------------------------------------------------------------------' '-----------------------------------' + * .-----------------------------------. .-----------------------------------------------------------------------------------------------------------------------------. .-----------------------------------. + * | | | | | | 1U / 2U | | | | | | | | | | | 1U / 2U | | | | | | + * |--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------| + * | 1U | | | 1U | | | | | | | | | | | | | | | | | 1U | | | 1U | + * | / +--------+--------+ / | o |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| | / +--------+--------+ / | + * | 2U | | | 2U | o | 1U / 2U | | | | | | | | | | | | | 2U | | | 2U | + * |--------+--------+--------+--------| o |-----------------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| |--------+--------+--------+--------| + * | | | | | | 1U / 2U | | | | | | | | | | | 1U / 2U | | | | | | + * | '--------+--------' | |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| | '--------+--------' | + * | 1U / 2UH / 2UV | 1U / 2UH / 2UV | | | | | | | | 1U / 2U | | | | | | | | 1U / 2UH / 2UV | 1U / 2UH / 2UV | + * '-----------------------------------' '-----------------------------------------------------------------------------------------------------------------------------' '-----------------------------------' + */ + +/* Numeric Max / Numeric Max + * .-----------------------------------. .-----------------------------------------------------------------------_-----------------------------------------------------------------------. .-----------------------------------. + * | | | | | | | | | | | | | | | | | | | | | | | | | | | + * '-----------------------------------' '-----------------------------------------------------------------------------------------------------------------------------------------------' '-----------------------------------' + * .-----------------------------------. .-----------------------------------------------------------------------------------------------------------------------------------------------. .-----------------------------------. + * | | | | | | 1U / 2U | | | | | | | | | | | | | 1U / 2U | | | | | | + * |--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------| + * | 1U | | | 1U | | | | | | | | | | | | | | | | | | | 1U | | | 1U | + * | / +--------+--------+ / | o |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| | / +--------+--------+ / | + * | 2U | | | 2U | o | 1U / 2U | | | | | | | | | | | | | | | 2U | | | 2U | + * |--------+--------+--------+--------| o |-----------------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| |--------+--------+--------+--------| + * | | | | | | 1U / 2U | | | | | | | | | | | | | 1U / 2U | | | | | | + * | '--------+--------' | |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| | '--------+--------' | + * | 1U / 2UH / 2UV | 1U / 2UH / 2UV | | | | | | | | 1U / 2U | 1U / 2U | | | | | | | | 1U / 2UH / 2UV | 1U / 2UH / 2UV | + * '-----------------------------------' '-----------------------------------------------------------------------------------------------------------------------------------------------' '-----------------------------------' + */ diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h new file mode 100644 index 0000000000..f50378ffa8 --- /dev/null +++ b/keyboards/vision_division/config.h @@ -0,0 +1,139 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +// Due to the configurability of this keyboard, matrix sizes are determined in the keymap's config.h + + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/vision_division/keymaps/default/Makefile b/keyboards/vision_division/keymaps/default/Makefile new file mode 100644 index 0000000000..ecbe7e1ab2 --- /dev/null +++ b/keyboards/vision_division/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/vision_division/keymaps/default/config.h b/keyboards/vision_division/keymaps/default/config.h new file mode 100644 index 0000000000..16740fb15b --- /dev/null +++ b/keyboards/vision_division/keymaps/default/config.h @@ -0,0 +1,59 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" +#include "matrix_types.h" + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID GET_PID(NUMERIC_NORMAL, HOMING_MAX_TEENSY) +#define DEVICE_VER 0x0001 +#define MANUFACTURER IBNobody +#define PRODUCT Vision Division +#define DESCRIPTION Full / Split Keyboard + + +#define MATRIX_ROWS 6 +#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 } + +#define MATRIX_COLS GET_MATRIX_COLS(NUMERIC_NORMAL, HOMING_MAX_TEENSY) +#define MATRIX_COL_PINS GET_MATRIX_COL_PINS(NUMERIC_NORMAL, HOMING_MAX_TEENSY) + +#define UNUSED_PINS + +/*#define KEYMAP( \ + k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C, \ + k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C, \ + k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C, \ + k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C, \ + k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C, \ + k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, k60B, k60C, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, k61C \ +) \ +KEYMAP_MASTER(NUMERIC_MAX_TEENSY, NUMERIC_MAX, \ + k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C, \ + k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C, \ + k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C, \ + k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C, \ + k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C, \ + k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, k60B, k60C, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, k61C \ +)*/ + +#define KEYMAP( \ + k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, \ + k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, \ + k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, \ + k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, \ + k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, \ + k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B \ +) \ +KEYMAP_MASTER(NUMERIC_NORMAL, HOMING_MAX_TEENSY, \ + k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, KC_NO, KC_NO, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, KC_NO, \ + k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, KC_NO, KC_NO, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, KC_NO, \ + k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, KC_NO, KC_NO, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, KC_NO, \ + k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, KC_NO, KC_NO, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, KC_NO, \ + k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, KC_NO, KC_NO, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, KC_NO, \ + k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, KC_NO, KC_NO, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, KC_NO \ +) + +#endif
\ No newline at end of file diff --git a/keyboards/vision_division/keymaps/default/keymap.c b/keyboards/vision_division/keymaps/default/keymap.c new file mode 100644 index 0000000000..b8cef9c759 --- /dev/null +++ b/keyboards/vision_division/keymaps/default/keymap.c @@ -0,0 +1,630 @@ +#include "vision_division.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "led.h" + +#ifdef AUDIO_ENABLE + #include "audio.h" + #include "song_list.h" +#endif + +#define LAYER_QWERTY 0 +#define LAYER_COLEMAK 1 +#define LAYER_DVORAK 2 +#define LAYER_UPPER 3 +#define LAYER_LOWER 4 +#define LAYER_FUNCTION 5 +#define LAYER_MOUSE 6 +#define LAYER_ADJUST 7 + +#define MACRO_QWERTY 0 +#define MACRO_COLEMAK 1 +#define MACRO_DVORAK 2 +#define MACRO_UPPER 3 +#define MACRO_LOWER 4 +#define MACRO_FUNCTION 5 +#define MACRO_MOUSE 6 +#define MACRO_TIMBRE_1 7 +#define MACRO_TIMBRE_2 8 +#define MACRO_TIMBRE_3 9 +#define MACRO_TIMBRE_4 10 +#define MACRO_TEMPO_U 11 +#define MACRO_TEMPO_D 12 +#define MACRO_TONE_DEFAULT 13 +#define MACRO_MUSIC_TOGGLE 14 +#define MACRO_AUDIO_TOGGLE 16 +#define MACRO_INC_VOICE 18 +#define MACRO_DEC_VOICE 19 +#define MACRO_BACKLIGHT 20 +#define MACRO_BREATH_TOGGLE 21 +#define MACRO_BREATH_SPEED_INC 23 +#define MACRO_BREATH_SPEED_DEC 24 +#define MACRO_BREATH_DEFAULT 25 + +#define M_QWRTY M(MACRO_QWERTY) +#define M_COLMK M(MACRO_COLEMAK) +#define M_DVORK M(MACRO_DVORAK) +#define M_UPPER M(MACRO_UPPER) +#define M_LOWER M(MACRO_LOWER) +#define M_FUNCT M(MACRO_FUNCTION) +#define M_MOUSE M(MACRO_MOUSE) +#define TIMBR_1 M(MACRO_TIMBRE_1) +#define TIMBR_2 M(MACRO_TIMBRE_2) +#define TIMBR_3 M(MACRO_TIMBRE_3) +#define TIMBR_4 M(MACRO_TIMBRE_4) +#define TMPO_UP M(MACRO_TEMPO_U) +#define TMPO_DN M(MACRO_TEMPO_D) +#define TMPO_DF M(MACRO_TONE_DEFAULT) +#define M_BACKL M(MACRO_BACKLIGHT) +#define M_BRTOG M(MACRO_BREATH_TOGGLE) +#define M_BSPDU M(MACRO_BREATH_SPEED_INC) +#define M_BSPDD M(MACRO_BREATH_SPEED_DEC) +#define M_BDFLT M(MACRO_BREATH_DEFAULT) + + +#define VC_UP M(MACRO_INC_VOICE) +#define VC_DOWN M(MACRO_DEC_VOICE) + + +#define SC_UNDO LCTL(KC_Z) +#define SC_REDO LCTL(KC_Y) +#define SC_CUT LCTL(KC_X) +#define SC_COPY LCTL(KC_C) +#define SC_PSTE LCTL(KC_V) +#define SC_SELA LCTL(KC_A) +#define SC_SAVE LCTL(KC_S) +#define SC_OPEN LCTL(KC_O) +#define SC_ACLS LALT(KC_F4) +#define SC_CCLS LCTL(KC_F4) + +#define OS_SHFT KC_FN0 + +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define ________________ _______, _______ +#define XXXXXXXXXXXXXXXX XXXXXXX, XXXXXXX + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + +KEYMAP( \ + KC_VOLD, KC_MUTE, KC_VOLU, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_KP_7, KC_KP_8, KC_KP_9, KC_PPLS, KC_TAB, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, KC_CAPS, KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, \ + KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX, \ + KC_KP_0, KC_KP_0, KC_PDOT, KC_PENT, KC_LCTL, KC_LCTL, XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, KC_SPC, KC_SPC, XXXXXXX, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ +) + + +// [LAYER_QWERTY] = { // QWERTY +// { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, +// { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, +// { KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, +// { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, +// { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, +// }, + + +// /* Numeric Max / Homing Normal - Traditional +// * .-----------------------------------. .-----------------------------------. .-----------------_-----------------. .-----------------------------------. .--------------------------. +// * | | | | | | | | | | | | | | | | | | | | | | | | +// * '-----------------------------------' '-----------------------------------' '-----------------------------------' '-----------------------------------' '--------------------------' +// * .-----------------------------------. .-----------------------------------------------------------------------------------------------------------------------------. .--------------------------. +// * | | | | | | ESC | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | | | | | | +// * |--------+--------+--------+--------| | -------+ -------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------| +// * | | | | | | TAB | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | | | | | | +// * |--------+--------+--------+ | o | -------+ -------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| '--------+--------+--------' +// * | | | | | o | CAPS | CAPS | A | S | D | F | G | H | J | K | L | ; | ' | | +// * |--------+--------+--------+--------| o | -------+ -------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---+--------| .--------. +// * | | | | | | LSHIFT | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX | | | | +// * |--------+--------+--------+ | | -------+ -------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+--------+--------| .--------+--------+--------. +// * | | | | | LCTRL | LCTRL | LWIN | FN | LALT | UPPER | XXXXXX . SPACE | LOWER | SHIFT | RALT | APP | RCTRL | | | | | | +// * '-----------------------------------' '-----------------------------------------------------------------------------------------------------------------------------' '--------------------------' +// */ + + +// /* QWERTY +// * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. +// * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| +// * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| +// * | CAPS | A | S | D | F | G | H | J | K | L | ; | ' | XXXXXX . ENTER | PG UP | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| +// * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | +// * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| +// * | LCTRL | LWIN | FN | LALT | UPPER | XXXXXX . SPACE | LOWER | SHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | +// * '--------------------------------------------------------------------------------------------------------------------------------------' +// */ + +// [LAYER_QWERTY] = { // QWERTY +// { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, +// { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, +// { KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, +// { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, +// { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, +// }, + +// /* COLEMAK +// * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. +// * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| +// * | TAB | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | DEL | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| +// * | BACKSP | A | R | S | T | D | H | N | E | I | O | ' | XXXXXX . ENTER | PG UP | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| +// * | LSHIFT | Z | X | C | V | B | K | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | +// * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| +// * | LCTRL | LWIN | FN | LALT | UPPER | XXXXXX . SPACE | LOWER | SHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | +// * '--------------------------------------------------------------------------------------------------------------------------------------' +// */ + +// [LAYER_COLEMAK] = { // COLEMAK +// { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, +// { KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, +// { KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, +// { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, +// { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, +// }, + +// /* DVORAK +// * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. +// * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | [ | ] | XXXXXX . BACKSP | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| +// * | TAB | ' | , | . | P | Y | F | G | C | R | L | / | = | \ | DEL | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| +// * | CAPS | A | O | E | U | I | D | H | T | N | S | - | XXXXXX . ENTER | PG UP | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| +// * | LSHIFT | ; | Q | J | K | X | B | M | W | V | Z | XXXXXX . RSHIFT | UP | PG DN | +// * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| +// * | LCTRL | LWIN | FN | LALT | UPPER | XXXXXX . SPACE | LOWER | SHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | +// * '--------------------------------------------------------------------------------------------------------------------------------------' +// */ + +// [LAYER_DVORAK] = { // DVORAK +// { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_BSPC }, +// { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DEL }, +// { KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, KC_ENT, KC_PGUP }, +// { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, +// { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, +// }, + +// /* UPPER +// * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. +// * | PRINT | BR TOG | BR SP+ | BR SP- | BR RST | XXXXXX | XXXXXX | NUM LK | / | * | | NUM LK | SCR LK | XXXXXX . PAUSE | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| +// * | | F1 | F2 | F3 | F4 | | | 7 | 8 | 9 | - | | | | INS | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| +// * | CAP LK | F5 | F6 | F7 | F8 | | | 4 | 5 | 6 | + | | XXXXXX . | HOME | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| +// * | | F9 | F10 | F11 | F12 | | | 1 | 2 | 3 | ENTER | XXXXXX . | | END | +// * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| +// * | | | | | | 0 | | RALT | . | ENTER | | | | | +// * '--------------------------------------------------------------------------------------------------------------------------------------' +// */ + +// [LAYER_UPPER] = { // UPPER +// { KC_PSCR, M_BRTOG, M_BSPDU, M_BSPDD, M_BDFLT, XXXXXXX, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, XXXXXXX, XXXXXXX, KC_SLCK, KC_PAUS, KC_PAUS }, +// { _______, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, _______, _______, _______, KC_INS }, +// { KC_CAPS, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, XXXXXXX, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, ________________, KC_HOME }, +// { _______, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, ________________, _______, KC_END }, +// { _______, _______, _______, _______, _______, KC_KP_0, KC_KP_0, _______, KC_RALT, KC_PDOT, KC_PENT, _______, _______, _______, _______ }, +// }, + +// /* LOWER +// * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. +// * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . BACKSP | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| +// * | | $ | { | [ | ( | % | # | ) | ] | } | @ | | | | INS | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| +// * | | ^ | * | + | - | / | \ | _ | ' | " | ` | | XXXXXX . | HOME | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| +// * | | | | & | ! | ~ | ; | : | = | < | > | ? | XXXXXX . | | END | +// * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| +// * | | | | | | | | | | | | | | | +// * '--------------------------------------------------------------------------------------------------------------------------------------' +// */ + +// [LAYER_LOWER] = { // LOWER +// { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ________________ }, +// { _______, KC_DLR, KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT, _______, _______, _______, KC_INS }, +// { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SLSH, KC_BSLS, KC_UNDS, KC_QUOT, KC_DQT, KC_GRV, _______, ________________, KC_HOME }, +// { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SCLN, KC_COLN, KC_EQL, KC_LT, KC_GT, KC_QUES, ________________, _______, KC_END }, +// { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______ }, +// }, + +// /* FUNCTION +// * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. +// * | NUM LK | | | | | | | | | | | | | XXXXXX . | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| +// * | SCR LK | F13 | F14 | F15 | F16 | | | | | | | | | | | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| +// * | CAP LK | F17 | F18 | F19 | F20 | | | | | | | | XXXXXX . | | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| +// * | | F21 | F22 | F23 | F24 | | | | | | | XXXXXX . | VOL UP | MUTE | +// * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| +// * | | | | | | PLAY/PAUSE | | | | | | PTRACK | VOL DN | NTRACK | +// * '--------------------------------------------------------------------------------------------------------------------------------------' +// */ + +// [LAYER_FUNCTION] = { // FUNCTION +// { KC_NLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX }, +// { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, +// { KC_CAPS, KC_F17, KC_F18, KC_F19, KC_F20, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX, XXXXXXX }, +// { _______, KC_F21, KC_F22, KC_F23, KC_F24, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ________________, KC_VOLU, KC_MUTE }, +// { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT }, +// }, + +// #ifdef MOUSEKEY_ENABLE + +// [LAYER_MOUSE] = { // MOUSE +// { _______, KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX }, +// { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, +// { XXXXXXX, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX, KC_WH_U }, +// { _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ________________, KC_MS_U, KC_WH_D }, +// { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, +// }, + +// #endif + +// [LAYER_ADJUST] = { // ADJUST +// { _______, TIMBR_1, TIMBR_2, TIMBR_3, TIMBR_4, TMPO_UP, TMPO_DN, TMPO_DF, _______, _______, _______, MU_TOG, AU_TOG, ________________ }, +// { _______, M_QWRTY, M_COLMK, M_DVORK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, +// { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______ }, +// { _______, _______, _______, _______, M_BACKL, RESET, _______, M_MOUSE, _______, _______, _______, ________________, MUV_IN, _______ }, +// { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, MUV_DE, _______ }, +// }, + + +// /* +// [LAYER_EMPTY] = { // LAYER +// { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________ }, +// { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, +// { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______ }, +// { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______, _______ }, +// { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______ }, +// }, +// */ + +}; + +#ifdef AUDIO_ENABLE + +float tone_my_startup[][2] = SONG(ODE_TO_JOY); +float tone_my_goodbye[][2] = SONG(ROCK_A_BYE_BABY); + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float tone_audio_on[][2] = SONG(CLOSE_ENCOUNTERS_5_NOTE); +float tone_music_on[][2] = SONG(DOE_A_DEER); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_caps_on[][2] = SONG(CAPS_LOCK_ON_SOUND); +float tone_caps_off[][2] = SONG(CAPS_LOCK_OFF_SOUND); +float tone_numlk_on[][2] = SONG(NUM_LOCK_ON_SOUND); +float tone_numlk_off[][2] = SONG(NUM_LOCK_OFF_SOUND); +float tone_scroll_on[][2] = SONG(SCROLL_LOCK_ON_SOUND); +float tone_scroll_off[][2] = SONG(SCROLL_LOCK_OFF_SOUND); + +#endif /* AUDIO_ENABLE */ + +void persistant_default_layer_set(uint16_t default_layer) +{ + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_ONESHOT(MOD_LSFT), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + + // MACRODOWN only works in this function + switch(id) + { + + // case MACRO_BREATH_TOGGLE: + // if (record->event.pressed) + // { + // breathing_toggle(); + // } + // break; + + // case MACRO_BREATH_SPEED_INC: + // if (record->event.pressed) + // { + // breathing_speed_inc(1); + // } + // break; + + // case MACRO_BREATH_SPEED_DEC: + // if (record->event.pressed) + // { + // breathing_speed_dec(1); + // } + // break; + + // case MACRO_BREATH_DEFAULT: + // if (record->event.pressed) + // { + // breathing_defaults(); + // } + // break; + + case MACRO_QWERTY: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_QWERTY); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, STACCATO); + #endif /* AUDIO_ENABLE */ + } + break; + + case MACRO_COLEMAK: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_COLEMAK); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, STACCATO); + #endif /* AUDIO_ENABLE */ + } + break; + + case MACRO_DVORAK: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_DVORAK); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, STACCATO); + #endif /* AUDIO_ENABLE */ + } + break; + + case MACRO_UPPER: + if (record->event.pressed) + { + layer_on(LAYER_UPPER); + // breathing_speed_set(2); + // breathing_pulse(); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + else + { + layer_off(LAYER_UPPER); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + break; + + case MACRO_LOWER: + if (record->event.pressed) + { + layer_on(LAYER_LOWER); + // breathing_speed_set(2); + // breathing_pulse(); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + else + { + layer_off(LAYER_LOWER); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + break; + + case MACRO_FUNCTION: + if (record->event.pressed) + { + // breathing_speed_set(3); + // breathing_enable(); + layer_on(LAYER_FUNCTION); + } + else + { + // breathing_speed_set(1); + // breathing_self_disable(); + layer_off(LAYER_FUNCTION); + } + break; + +#ifdef MOUSEKEY_ENABLE + + case MACRO_MOUSE: + if (record->event.pressed) + { + layer_invert(LAYER_MOUSE); + } + break; + +#endif /* MOUSEKEY_ENABLE */ + +#ifdef AUDIO_ENABLE + + case MACRO_TIMBRE_1: + if (record->event.pressed) set_timbre(TIMBRE_12); + break; + + case MACRO_TIMBRE_2: + if (record->event.pressed) set_timbre(TIMBRE_25); + break; + + case MACRO_TIMBRE_3: + if (record->event.pressed) set_timbre(TIMBRE_50); + break; + + case MACRO_TIMBRE_4: + if (record->event.pressed) set_timbre(TIMBRE_75); + break; + + case MACRO_TEMPO_U: + if (record->event.pressed) increase_tempo(10); + break; + + case MACRO_TEMPO_D: + if (record->event.pressed) decrease_tempo(10); + break; + + case MACRO_TONE_DEFAULT: + if (record->event.pressed) + { + set_timbre(TIMBRE_DEFAULT); + set_tempo(TEMPO_DEFAULT); + } + break; + +/* + case MACRO_AUDIO_TOGGLE: + if (record->event.pressed) + { + if (is_audio_on()) + { + audio_off(); + } + else + { + audio_on(); + PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO); + } + } + break; + + case MACRO_MUSIC_TOGGLE: + if (record->event.pressed) + { + if (IS_LAYER_ON(LAYER_MUSIC)) + { + layer_off(LAYER_MUSIC); + stop_all_notes(); + } + else + { + PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO); + layer_on(LAYER_MUSIC); + } + } + break; + case MACRO_INC_VOICE: + if (record->event.pressed) + { + #ifdef AUDIO_ENABLE + voice_iterate(); + PLAY_NOTE_ARRAY(music_scale, false, STACCATO); + #endif + } + break; + + case MACRO_DEC_VOICE: + if (record->event.pressed) + { + #ifdef AUDIO_ENABLE + voice_deiterate(); + PLAY_NOTE_ARRAY(music_scale, false, STACCATO); + #endif + } + break; +*/ + +#endif /* AUDIO_ENABLE */ + +#ifdef BACKLIGHT_ENABLE + case MACRO_BACKLIGHT: + if (record->event.pressed) + { + backlight_step(); + } +#endif + + default: + break; + + } + return MACRO_NONE; +}; + + +#ifdef AUDIO_ENABLE + +void matrix_init_user(void) +{ + set_voice(default_voice); + startup_user(); + println("Matrix Init"); +} + +void led_set_user(uint8_t usb_led) +{ + static uint8_t old_usb_led = 0; + + _delay_ms(10); // gets rid of tick + + if (!is_playing_notes()) + { + if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK))) + { + // If CAPS LK LED is turning on... + PLAY_NOTE_ARRAY(tone_caps_on, false, LEGATO); + } + else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK))) + { + // If CAPS LK LED is turning off... + PLAY_NOTE_ARRAY(tone_caps_off, false, LEGATO); + } + else if ((usb_led & (1<<USB_LED_NUM_LOCK)) && !(old_usb_led & (1<<USB_LED_NUM_LOCK))) + { + // If NUM LK LED is turning on... + PLAY_NOTE_ARRAY(tone_numlk_on, false, LEGATO); + } + else if (!(usb_led & (1<<USB_LED_NUM_LOCK)) && (old_usb_led & (1<<USB_LED_NUM_LOCK))) + { + // If NUM LED is turning off... + PLAY_NOTE_ARRAY(tone_numlk_off, false, LEGATO); + } + else if ((usb_led & (1<<USB_LED_SCROLL_LOCK)) && !(old_usb_led & (1<<USB_LED_SCROLL_LOCK))) + { + // If SCROLL LK LED is turning on... + PLAY_NOTE_ARRAY(tone_scroll_on, false, LEGATO); + } + else if (!(usb_led & (1<<USB_LED_SCROLL_LOCK)) && (old_usb_led & (1<<USB_LED_SCROLL_LOCK))) + { + // If SCROLL LED is turning off... + PLAY_NOTE_ARRAY(tone_scroll_off, false, LEGATO); + } + } + + old_usb_led = usb_led; +} + + +void startup_user() +{ + _delay_ms(10); // gets rid of tick + PLAY_NOTE_ARRAY(tone_my_startup, false, STACCATO); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_my_goodbye, false, STACCATO); + _delay_ms(2000); + stop_all_notes(); +} + +void audio_on_user(void) +{ + PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO); +} + +void music_on_user(void) +{ + PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, STACCATO); +} + +#endif /* AUDIO_ENABLE */
\ No newline at end of file diff --git a/keyboards/vision_division/keymaps/default/readme.md b/keyboards/vision_division/keymaps/default/readme.md new file mode 100644 index 0000000000..bb0ed38622 --- /dev/null +++ b/keyboards/vision_division/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for vision_division
\ No newline at end of file diff --git a/keyboards/vision_division/matrix_types.h b/keyboards/vision_division/matrix_types.h new file mode 100644 index 0000000000..d40b2079a6 --- /dev/null +++ b/keyboards/vision_division/matrix_types.h @@ -0,0 +1,167 @@ +#ifndef MATRIX_TYPES_H +#define MATRIX_TYPES_H + +// Because the vision/division keyboard allows for multiple PCB configurations, the configuration +// can get tricky. The PCB itself has 12 columns, but to achieve a full sized 14-column keyboard +// with a 4-column numeric pad on the left and a 3-column homing key cluster on the right, the +// right PCB must have its rightmost column cut off. Also either the rightmost two columns on the +// left PCB or the leftmost two columns on the right PCB need to be cut away. +// +// _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ +// Left Numeric Max = 1 2 3 4 _ 5 6 7 8 9 0 A B C +// Left Homing Max = 2 3 4 _ 5 6 7 8 9 0 A B C +// Left Numeric Extended = 1 2 3 4 _ 5 6 7 8 9 0 A B +// Left Homing Extended = 2 3 4 _ 5 6 7 8 9 0 A B +// Left Numeric Normal = 1 2 3 4 _ 5 6 7 8 9 0 A +// Left Homing Normal = 2 3 4 _ 5 6 7 8 9 0 A +// Right Numeric Max = 1 2 3 4 5 6 7 8 _ 9 A B C +// Right Homing Max = 1 2 3 4 5 6 7 8 _ 9 A B +// Right Numeric Extended = 2 3 4 5 6 7 8 _ 9 A B C +// Right Homing Extended = 2 3 4 5 6 7 8 _ 9 A B +// Right Numeric Normal = 3 4 5 6 7 8 _ 9 A B C +// Right Homing Normal = 3 4 5 6 7 8 _ 9 A B +// +// +// A full keyboard would look like this: +// +// _Left_Numeric_Max__________|_Right_Homing_Normal +// 1 2 3 4 _ 5 6 7 8 9 0 A B C|3 4 5 6 7 8 _ 9 A B +// +// The ideal full keyboard would use a normal and max rather than two extended because the max +// size allows for a centered 2U space key. + + +#define MATRIX_TYPE_ABSENT 0 +#define MATRIX_TYPE_NUMERIC_MAX 1 +#define MATRIX_TYPE_HOMING_MAX 2 +#define MATRIX_TYPE_NUMERIC_EXTENDED 3 +#define MATRIX_TYPE_HOMING_EXTENDED 4 +#define MATRIX_TYPE_NUMERIC_NORMAL 5 +#define MATRIX_TYPE_HOMING_NORMAL 6 +#define MATRIX_TYPE_NUMERIC_MAX_TEENSY 7 +#define MATRIX_TYPE_HOMING_MAX_TEENSY 8 +#define MATRIX_TYPE_NUMERIC_EXTENDED_TEENSY 9 +#define MATRIX_TYPE_HOMING_EXTENDED_TEENSY 10 +#define MATRIX_TYPE_NUMERIC_NORMAL_TEENSY 11 +#define MATRIX_TYPE_HOMING_NORMAL_TEENSY 12 + + +// Column Length + +#define MATRIX_COLS_ABSENT 0 +#define MATRIX_COLS_NUMERIC_MAX 12 +#define MATRIX_COLS_HOMING_MAX 11 +#define MATRIX_COLS_NUMERIC_EXTENDED 11 +#define MATRIX_COLS_HOMING_EXTENDED 10 +#define MATRIX_COLS_NUMERIC_NORMAL 10 +#define MATRIX_COLS_HOMING_NORMAL 9 +#define MATRIX_COLS_NUMERIC_MAX_TEENSY 12 +#define MATRIX_COLS_HOMING_MAX_TEENSY 11 +#define MATRIX_COLS_NUMERIC_EXTENDED_TEENSY 11 +#define MATRIX_COLS_HOMING_EXTENDED_TEENSY 10 +#define MATRIX_COLS_NUMERIC_NORMAL_TEENSY 10 +#define MATRIX_COLS_HOMING_NORMAL_TEENSY 9 + +// Left PCB Pin assignments + +#define MATRIX_COL_PINS_LEFT_ABSENT + +#define MATRIX_COL_PINS_LEFT_NUMERIC_MAX C7, C5, C4, A7, A3, A6, A2, A5, A1, A0, A4, E6 +#define MATRIX_COL_PINS_LEFT_HOMING_MAX C5, C4, A7, A3, A6, A2, A5, A1, A0, A4, E6 +#define MATRIX_COL_PINS_LEFT_NUMERIC_EXTENDED C7, C5, C4, A7, A3, A6, A2, A5, A1, A0, A4 +#define MATRIX_COL_PINS_LEFT_HOMING_EXTENDED C5, C4, A7, A3, A6, A2, A5, A1, A0, A4 +#define MATRIX_COL_PINS_LEFT_NUMERIC_NORMAL C7, C5, C4, A7, A3, A6, A2, A5, A1, A0 +#define MATRIX_COL_PINS_LEFT_HOMING_NORMAL C5, C4, A7, A3, A6, A2, A5, A1, A0 + +#define MATRIX_COL_PINS_LEFT_NUMERIC_MAX_TEENSY C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3 +#define MATRIX_COL_PINS_LEFT_HOMING_MAX_TEENSY C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3 +#define MATRIX_COL_PINS_LEFT_NUMERIC_EXTENDED_TEENSY C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2 +#define MATRIX_COL_PINS_LEFT_HOMING_EXTENDED_TEENSY C0, E1, E0, F3, F2, F1, F0, B0, B1, B2 +#define MATRIX_COL_PINS_LEFT_NUMERIC_NORMAL_TEENSY C1, C0, E1, E0, F3, F2, F1, F0, B0, B1 +#define MATRIX_COL_PINS_LEFT_HOMING_NORMAL_TEENSY C0, E1, E0, F3, F2, F1, F0, B0, B1 + +// Right PCB Pin assignments + +#define MATRIX_COL_PINS_RIGHT_ABSENT + +#define MATRIX_COL_PINS_RIGHT_NUMERIC_MAX E6, A4, A0, A1, A5, A2, A6, A3, A7, C4, C5, C7 +#define MATRIX_COL_PINS_RIGHT_HOMING_MAX E6, A4, A0, A1, A5, A2, A6, A3, A7, C4, C5 +#define MATRIX_COL_PINS_RIGHT_NUMERIC_EXTENDED A4, A0, A1, A5, A2, A6, A3, A7, C4, C5, C7 +#define MATRIX_COL_PINS_RIGHT_HOMING_EXTENDED A4, A0, A1, A5, A2, A6, A3, A7, C4, C5 +#define MATRIX_COL_PINS_RIGHT_NUMERIC_NORMAL A0, A1, A5, A2, A6, A3, A7, C4, C5, C7 +#define MATRIX_COL_PINS_RIGHT_HOMING_NORMAL A0, A1, A5, A2, A6, A3, A7, C4, C5 + +#define MATRIX_COL_PINS_RIGHT_NUMERIC_MAX_TEENSY B3, B2, B1, B0, F0, F1, F2, F3, E0, E1, C0, C1 +#define MATRIX_COL_PINS_RIGHT_HOMING_MAX_TEENSY B3, B2, B1, B0, F0, F1, F2, F3, E0, E1, C0 +#define MATRIX_COL_PINS_RIGHT_NUMERIC_EXTENDED_TEENSY B2, B1, B0, F0, F1, F2, F3, E0, E1, C0, C1 +#define MATRIX_COL_PINS_RIGHT_HOMING_EXTENDED_TEENSY B2, B1, B0, F0, F1, F2, F3, E0, E1, C0 +#define MATRIX_COL_PINS_RIGHT_NUMERIC_NORMAL_TEENSY B1, B0, F0, F1, F2, F3, E0, E1, C0, C1 +#define MATRIX_COL_PINS_RIGHT_HOMING_NORMAL_TEENSY B1, B0, F0, F1, F2, F3, E0, E1, C0 + +// Fetch Macros + +#define GET_PID(LEFT_TYPE, RIGHT_TYPE) ( ( ( MATRIX_TYPE_ ## LEFT_TYPE ) << 8 ) + ( MATRIX_TYPE_ ## RIGHT_TYPE ) ) +#define GET_MATRIX_COL(TYPE) MATRIX_COLS_ ## TYPE +#define GET_MATRIX_COLS(LEFT_TYPE, RIGHT_TYPE) ( ( GET_MATRIX_COL(LEFT_TYPE) ) + ( GET_MATRIX_COL(RIGHT_TYPE) ) ) +#define GET_MATRIX_COL_PINS(LEFT_TYPE, RIGHT_TYPE) { MATRIX_COL_PINS_LEFT_ ## LEFT_TYPE, MATRIX_COL_PINS_RIGHT_ ## RIGHT_TYPE } + +// Specialized Row Macros + +#define KEYMAP_ROW_LEFT_ABSENT( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) + +#define KEYMAP_ROW_LEFT_NUMERIC_MAX( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C +#define KEYMAP_ROW_LEFT_HOMING_MAX( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C +#define KEYMAP_ROW_LEFT_NUMERIC_EXTENDED( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B +#define KEYMAP_ROW_LEFT_HOMING_EXTENDED( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B +#define KEYMAP_ROW_LEFT_NUMERIC_NORMAL( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A +#define KEYMAP_ROW_LEFT_HOMING_NORMAL( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k02, k03, k04, k05, k06, k07, k08, k09, k0A +#define KEYMAP_ROW_LEFT_NUMERIC_MAX_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C +#define KEYMAP_ROW_LEFT_HOMING_MAX_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C +#define KEYMAP_ROW_LEFT_NUMERIC_EXTENDED_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B +#define KEYMAP_ROW_LEFT_HOMING_EXTENDED_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B +#define KEYMAP_ROW_LEFT_NUMERIC_NORMAL_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A +#define KEYMAP_ROW_LEFT_HOMING_NORMAL_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k02, k03, k04, k05, k06, k07, k08, k09, k0A + +#define KEYMAP_ROW_RIGHT_ABSENT( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) + +#define KEYMAP_ROW_RIGHT_NUMERIC_MAX( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C +#define KEYMAP_ROW_RIGHT_HOMING_MAX( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B +#define KEYMAP_ROW_RIGHT_NUMERIC_EXTENDED( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C +#define KEYMAP_ROW_RIGHT_HOMING_EXTENDED( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B +#define KEYMAP_ROW_RIGHT_NUMERIC_NORMAL( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C +#define KEYMAP_ROW_RIGHT_HOMING_NORMAL( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k03, k04, k05, k06, k07, k08, k09, k0A, k0B +#define KEYMAP_ROW_RIGHT_NUMERIC_MAX_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C +#define KEYMAP_ROW_RIGHT_HOMING_MAX_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B +#define KEYMAP_ROW_RIGHT_NUMERIC_EXTENDED_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C +#define KEYMAP_ROW_RIGHT_HOMING_EXTENDED_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B +#define KEYMAP_ROW_RIGHT_NUMERIC_NORMAL_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C +#define KEYMAP_ROW_RIGHT_HOMING_NORMAL_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C) k03, k04, k05, k06, k07, k08, k09, k0A, k0B + +// Changable Row Macro + +#define KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, \ + k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \ +) \ +KEYMAP_ROW_LEFT_ ## LEFT_TYPE(k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C), KEYMAP_ROW_RIGHT_ ## RIGHT_TYPE(k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C) + +// Changable Master Macro + +#define KEYMAP_MASTER(LEFT_TYPE, RIGHT_TYPE, \ + k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C, \ + k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C, \ + k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C, \ + k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C, \ + k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C, \ + k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \ +) \ +{ \ + { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C ) },\ + { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C ) },\ + { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C ) },\ + { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C ) },\ + { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C ) },\ + { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C ) },\ +} + + +#endif // MATRIX_TYPES_H
\ No newline at end of file diff --git a/keyboards/vision_division/readme.md b/keyboards/vision_division/readme.md new file mode 100644 index 0000000000..de200d7c5b --- /dev/null +++ b/keyboards/vision_division/readme.md @@ -0,0 +1,34 @@ +vision_division keyboard firmware +====================== + +## Keyboard Info + +[See this thread.](https://geekhack.org/index.php?topic=83692.msg2227856#msg2227856) + +Vision/Division is a full size or split keyboard that can be customized due to its pcb. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/vision_division folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: + +``` +$ make keymap=[default|jack|<name>] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file diff --git a/keyboards/vision_division/rules.mk b/keyboards/vision_division/rules.mk new file mode 100644 index 0000000000..063fba29bd --- /dev/null +++ b/keyboards/vision_division/rules.mk @@ -0,0 +1,70 @@ + + +# MCU name +MCU = at90usb1286 +# MCU = at90usb1287 +# MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=1024 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6
\ No newline at end of file diff --git a/keyboards/vision_division/vision_division.c b/keyboards/vision_division/vision_division.c new file mode 100644 index 0000000000..eb9336fa33 --- /dev/null +++ b/keyboards/vision_division/vision_division.c @@ -0,0 +1,28 @@ +#include "vision_division.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/vision_division/vision_division.h b/keyboards/vision_division/vision_division.h new file mode 100644 index 0000000000..a1f3195e9e --- /dev/null +++ b/keyboards/vision_division/vision_division.h @@ -0,0 +1,6 @@ +#ifndef VISION_DIVISION_H +#define VISION_DIVISION_H + +#include "quantum.h" + +#endif |
