diff options
Diffstat (limited to 'keyboards')
403 files changed, 17483 insertions, 7004 deletions
diff --git a/keyboards/alps64/readme.md b/keyboards/alps64/readme.md index 1798b193a5..f282730490 100644 --- a/keyboards/alps64/readme.md +++ b/keyboards/alps64/readme.md @@ -1,4 +1,14 @@ -Alps64 keyboard firmware -====================== +Alps64 +=== -TODO: to be updated. +An Alps-only 60% board designed by Hasu. + +Keyboard Maintainer: QMK Community +Hardware Supported: Alps64 PCB +Hardware Availability: https://geekhack.org/index.php?topic=69666.0 + +Make example for this keyboard (after setting up your build environment): + + make alps64-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/amj40/Makefile b/keyboards/amj40/Makefile new file mode 100755 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/amj40/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/amj40/amj40.c b/keyboards/amj40/amj40.c new file mode 100755 index 0000000000..5a23769991 --- /dev/null +++ b/keyboards/amj40/amj40.c @@ -0,0 +1,30 @@ +#include "amj40.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB |= (1<<2); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB &= ~(1<<2); + } else { + // Turn capslock off + PORTB |= (1<<2); + } +} diff --git a/keyboards/amj40/amj40.h b/keyboards/amj40/amj40.h new file mode 100755 index 0000000000..ab629cba7f --- /dev/null +++ b/keyboards/amj40/amj40.h @@ -0,0 +1,38 @@ +#ifndef AMJ40_H +#define AMJ40_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +/* AMJ40 ver2.0 layout1 配列一 + * ,-----------------------------------------------------------. + * | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 0B | + * |-----------------------------------------------------------| + * | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1B | + * |-----------------------------------------------------------| + * | 20 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | + * |-----------------------------------------------------------| + * | 30 | 31 | 32 | 34 | 35 | 39 | 3A | 3B | + * `-----------------------------------------------------------' + */ +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1b, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k34, k35, k39, k3a, k3b \ +) { \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, XXX, k1b}, \ + {k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b}, \ + {k30, k31, k32, XXX, k34, k35, XXX, XXX, XXX, k39, k3a, k3b} \ +} + + + + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif diff --git a/keyboards/amj40/config.h b/keyboards/amj40/config.h new file mode 100755 index 0000000000..4110111223 --- /dev/null +++ b/keyboards/amj40/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6072 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Han Chen +#define PRODUCT AMJ40 +#define DESCRIPTION qmk port of AMJ40 v2 PCB + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { F4, F5, F6, F7} +#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7} +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration + */ + +#define RGB_DI_PIN D3 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 4 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/amj40/keymaps/default/Makefile b/keyboards/amj40/keymaps/default/Makefile new file mode 100755 index 0000000000..034e697bc2 --- /dev/null +++ b/keyboards/amj40/keymaps/default/Makefile @@ -0,0 +1,27 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/amj40/keymaps/default/build.sh b/keyboards/amj40/keymaps/default/build.sh new file mode 100755 index 0000000000..6b4b4568f5 --- /dev/null +++ b/keyboards/amj40/keymaps/default/build.sh @@ -0,0 +1,42 @@ +#!/bin/bash +# adjust for cpu +# -j 16 gave best result on a hyperthreaded quad core core i7 + +LIMIT=10 +THREADS="-j 16" +KMAP=iso_split_rshift + +echo "We need sudo later" +sudo ls 2>&1 /dev/null + +function wait_bootloader { + echo "Waiting for Bootloader..." + local STARTTIME=$(date +"%s") + local REMIND=0 + local EXEC=dfu-programmer + local TARGET=atmega32u4 + while true + do + sudo $EXEC $TARGET get > /dev/null 2>&1 + [ $? -eq 0 ] && break + ENDTIME=$(date +"%s") + DURATION=$(($ENDTIME-$STARTTIME)) + if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] + then + echo "Did you forget to press the reset button?" + REMIND=1 + fi + sleep 1 + done +} +make clean +make KEYMAP=${KMAP} ${THREADS} +if [[ $? -eq 0 ]] +then + echo "please trigger flashing!" + wait_bootloader + sudo make KEYMAP=${KMAP} dfu ${THREADS} +else + echo "make failed" + exit 77 +fi diff --git a/keyboards/amj40/keymaps/default/keymap.c b/keyboards/amj40/keymaps/default/keymap.c new file mode 100755 index 0000000000..13b48c2ada --- /dev/null +++ b/keyboards/amj40/keymaps/default/keymap.c @@ -0,0 +1,173 @@ + + +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "amj40.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 + + + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + + + + + +// increase readability +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Default Layer + * ,-----------------------------------------------------------. + * | Esc| Q | W | E | R | T | Y | U | I | O | P | BS | + * |-----------------------------------------------------------| + * | Tab | A | S | D | F | G | H | J | K | L | Ent | + * |-----------------------------------------------------------| + * | LSft | Z | X | C | V | B | N | M | , | . | /? | + * |-----------------------------------------------------------| + * | LCtl | LGui| LAlt| spc fn0 | spc fn1 |fn2|RAlt|RCtl | + * `-----------------------------------------------------------' + */ + [_QWERTY] = KEYMAP( \ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,\ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,\ + KC_LCTL, KC_LGUI, KC_LALT, F(0), F(1), F(2), KC_RALT, KC_RCTL \ + ), + + /* Function Layer 1 HHKB style + * ,-----------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bkspc| + * |-----------------------------------------------------------| + * | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | [ | ] | Pipe | + * |-----------------------------------------------------------| + * | F7 | F8 | F9 | F10 | F11 | F12 | End|PgDn| ↓ | | | + * |-----------------------------------------------------------| + * | | | | | | Stop| App| | + * `-----------------------------------------------------------' + */ + [_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),BL_TOGG, BL_INC, BL_DEC, \ + _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + + /* Function Layer 1 HHKB style + * ,-----------------------------------------------------------. + * |Caps| |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus| ↑ | Ins| Del| + * |-----------------------------------------------------------| + * | | 🔇 | ⏏ | | * | / |Hone|PgUp| ← | → | | + * |-----------------------------------------------------------| + * | | 🔉 | 🔊 | | + | - | End|PgDn| ↓ | | | + * |-----------------------------------------------------------| + * | | | | | | Stop| App| | + * `-----------------------------------------------------------' + */ + [_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, KC_DEL, \ + _______, KC_TRNS, _______, KC_TRNS, KC_TRNS, _______, _______, RGB_TOG \ + ), + + /* Function Layer 1 HHKB style + * ,-----------------------------------------------------------. + * |Caps| |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus| ↑ | Ins| Del| + * |-----------------------------------------------------------| + * | | 🔇 | ⏏ | | * | / |Hone|PgUp| ← | → | | + * |-----------------------------------------------------------| + * | | 🔉 | 🔊 | | + | - | End|PgDn| ↓ | | | + * |-----------------------------------------------------------| + * | | | | | | Stop| App| | + * `-----------------------------------------------------------' + */ + [_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, \ + _______, _______, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, \ + KC_SYSTEM_SLEEP, _______, _______, _______, _______, _______, _______, _______ \ + ), + + + +}; + + + + +enum function_id { + LAUNCH, + RGBLED_TOGGLE, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), + [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC), + [2] = ACTION_LAYER_TAP_KEY(_ADJUST, KC_LGUI), + +}; + + + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + + return MACRO_NONE; +}; + + + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + switch (keycode) { + + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/amj40/keymaps/default/readme.md b/keyboards/amj40/keymaps/default/readme.md new file mode 100755 index 0000000000..2659292ae5 --- /dev/null +++ b/keyboards/amj40/keymaps/default/readme.md @@ -0,0 +1,11 @@ +AMJ40 Default Layout +===================== + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +# Features +* Based on a combination of the original AMJ40 keymap from the TMK firmware as well as the Planck Ortholinear keyboard's "Lower," "Raise," and "Adjust" layers. +* View the keymap.c file to understand they layout of the keymap. +* Has keys to toggle both the switch LEDs and underglow LEDs. + diff --git a/keyboards/amj40/keymaps/default/updatemerge.sh b/keyboards/amj40/keymaps/default/updatemerge.sh new file mode 100755 index 0000000000..da5457e195 --- /dev/null +++ b/keyboards/amj40/keymaps/default/updatemerge.sh @@ -0,0 +1,4 @@ +#!/bin/bash +git checkout amj60 # gets you on branch amj60 +git fetch origin # gets you up to date with origin +git merge origin/master diff --git a/keyboards/amj40/keymaps/fabian/Makefile b/keyboards/amj40/keymaps/fabian/Makefile new file mode 100755 index 0000000000..a914e4c0ce --- /dev/null +++ b/keyboards/amj40/keymaps/fabian/Makefile @@ -0,0 +1,27 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/amj40/keymaps/fabian/keymap.c b/keyboards/amj40/keymaps/fabian/keymap.c new file mode 100755 index 0000000000..aef514153e --- /dev/null +++ b/keyboards/amj40/keymaps/fabian/keymap.c @@ -0,0 +1,236 @@ +#include "amj40.h" + +// Set the custom keymap +#undef KEYMAP +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k39, k3a, k3b \ +) { \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b}, \ + {k30, k31, k32, k33, k34, k35, XXX, XXX, XXX, k39, k3a, k3b} \ +} + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Custom +#define CTL_ESC CTL_T(KC_ESC) // Tap for Escape, hold for Control +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +#define SFT_BSP SFT_T(KC_BSPC) // Tap for Backspace, hold for Shift +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift) +// #define MEH_GRV MEH_T(KC_GRV) // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift) + +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI | Lower and Space | Raise and Bksp | GUI |AltGr | Ctrl | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + SFT_BSP, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT , \ + F(2), KC_LCTL, KC_LALT, KC_LGUI, F(0), F(1), KC_RGUI, KC_RALT, KC_RCTL \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI | Lower and Space | Raise and Bksp | GUI |AltGr | Ctrl | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP( \ + HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + SFT_BSP, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT , \ + F(2), KC_LCTL, KC_LALT, KC_LGUI, F(0), F(1), KC_RGUI, KC_RALT, KC_RCTL \ +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI | Lower and Space | Raise and Bksp | GUI |AltGr | Ctrl | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = KEYMAP( \ + HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ + SFT_BSP, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT , \ + F(2), KC_LCTL, KC_LALT, KC_LGUI, F(0), F(1), KC_RGUI, KC_RALT, KC_RCTL \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | MS L | MS D |MS U | MS R |MS Btn| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_BTN1, \ + _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | Left | Down | Up | Rght |MS_BN2| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_BTN2, \ + _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * |Reset |Colemk|Qwerty|Dvorak| | | | | MU | | |Reset | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |AGNorm|AGSwap| | | | | ML | MD | MR | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | |AudOn |AudOff| | | | |MBtn1 |MBtn2 |MBtn3 | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( \ + RESET, COLEMAK, QWERTY, DVORAK, _______, _______, _______, _______, KC_MS_U, _______, _______, RESET, \ + _______, AG_NORM, AG_SWAP, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, \ + _______, AU_ON, AU_OFF, _______, _______, _______, _______, KC_BTN1, KC_BTN2, KC_BTN3, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), + [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_BSPC), + [2] = ACTION_LAYER_TAP_KEY(_ADJUST, KC_LGUI), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistent_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistent_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/amj40/readme.md b/keyboards/amj40/readme.md new file mode 100755 index 0000000000..e705f20fea --- /dev/null +++ b/keyboards/amj40/readme.md @@ -0,0 +1,35 @@ +AMJ40 keyboard firmware +====================== +DIY/Assembled compact 40% keyboard. + +Ported by N.Hou from the original TMK firmware. + +*Supports both backlight LEDs as well as RGB underglow. + +*For reference, the AMJ40 uses pin D3 for underglow lighting. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/amj40 +folder. Once your dev env is setup, you'll be able to type `make` to generate +your .hex - you can then use `make dfu` to program your PCB once you hit the +reset button. + +Depending on which keymap you would like to use, you will have to compile +slightly differently. + +### Default +To build with the default keymap, simply run `sudo make all`. +The .hex file will appear in the root of the qmk firmware folder. + + + + +### Original tmk firmware +The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ40). + + diff --git a/keyboards/amj40/rules.mk b/keyboards/amj40/rules.mk new file mode 100755 index 0000000000..18403ac328 --- /dev/null +++ b/keyboards/amj40/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/amj60/readme.md b/keyboards/amj60/readme.md index 0896134e0c..5b03ff0342 100644 --- a/keyboards/amj60/readme.md +++ b/keyboards/amj60/readme.md @@ -1,57 +1,14 @@ -AMJ60 keyboard firmware -====================== -DIY/Assembled compact 60% keyboard. +AMJ60 +=== -## Quantum MK Firmware +A 60% keyboard. -For the full Quantum feature list, see [the parent readme.md](/readme.md). +Keyboard Maintainer: QMK Community +Hardware Supported: AMJ60 +Hardware Availability: https://geekhack.org/index.php?topic=77636.0 -## Building +Make example for this keyboard (after setting up your build environment): -Download or clone the whole firmware and navigate to the keyboards/amj60 -folder. Once your dev env is setup, you'll be able to type `make` to generate -your .hex - you can then use `make dfu` to program your PCB once you hit the -reset button. + make amj60-maximized -Depending on which keymap you would like to use, you will have to compile -slightly differently. - -### Default -To build with the default keymap, simply run `make`. - -### Other Keymaps -Several version of keymap are available in advance but you are recommended to -define your favorite layout yourself. To define your own keymap create file -named `<name>.c` in the keymaps folder, and see keymap document (you can find -in top readme.md) and existent keymap files. - -To build the firmware binary hex file with a keymap just do `make` with -`KEYMAP` option like: -`` -$ make KEYMAP=[default|jack|<name>] -`` -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` -folder. - -## Variations -KEYMAP macros for the following layouts are available: - -* default, for all the available, possible keys -* ANSI, for 60% ANSI keyboard -* ISO -* ISO w/ split right shift key -* HHKB - -Remark: all but "ISO w/ split right shift key" are untested and were done to the best of my knowledge. - -### Original tmk firmware -The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ60). - -## Further information -Since information and documentation for this board are sparse, (at least for non-chinese speaking ppl) here is everything that could be found - -* [geekhack discussion](https://geekhack.org/index.php?topic=53070.0) -* [chinese discussion](https://www.v2ex.com/t/161887) -* Board has [dedicated pinouts](https://i.imgur.com/D0sWhyh.jpg?1) for a bluetooth module -* has pins for external power [picture](https://i.imgur.com/00VrtIp.jpg?1). -* most information comes from [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/32oonr/gh60_pcb_for_your_custom_keyboard/) +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/amjpad/readme.md b/keyboards/amjpad/readme.md new file mode 100644 index 0000000000..beb4988a9c --- /dev/null +++ b/keyboards/amjpad/readme.md @@ -0,0 +1,14 @@ +AMJ Pad +=== + +A DIY Keypad Kit + +Keyboard Maintainer: QMK Community +Hardware Supported: AMJ Pad +Hardware Availability: https://geekhack.org/index.php?topic=83546.0 + +Make example for this keyboard (after setting up your build environment): + + make amjpad-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md index 476d1bce3d..64ad4ba98a 100644 --- a/keyboards/atreus/readme.md +++ b/keyboards/atreus/readme.md @@ -1,187 +1,18 @@ -atreus keyboard firmware -====================== +Atreus +=== -## Quantum MK Firmware - -You have access to a bunch of goodies! Check out the Makefile to enable/disable some of the features. Uncomment the `#` to enable them. Setting them to `no` does nothing and will only confuse future you. - - BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality - MIDI_ENABLE = yes # MIDI controls - # UNICODE_ENABLE = yes # Unicode support - this is commented out, just as an example. You have to use #, not // - BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID - -## Atreus specific information +A small mechanical keyboard that is based around the shape of the human hand. These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, one powered by an A-Star. This repository currently assumes that you have an A-Star powered Atreus. If you are using a Teensy2, specify that by adding `TEENSY2=yes` to your `make` commands. If you are coming from the [atreus-firmware](https://github.com/technomancy/atreus-firmware), we've also brought forward the `make upload` command for you to use. -## Quick aliases to common actions - -Your keymap can include shortcuts to common operations (called "function actions" in tmk). - -### Switching and toggling layers - -`MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer. When you apply this to a key, that same key must be set as `KC_TRNS` on the destination layer. Otherwise, you won't make it back to the original layer when you release the key (and you'll get a keycode sent). You can only switch to layers *above* your current layer. If you're on layer 0 and you use `MO(1)`, that will switch to layer 1 just fine. But if you include `MO(3)` on layer 5, that won't do anything for you -- because layer 3 is lower than layer 5 on the stack. - -`LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped. Like `MO()`, this only works upwards in the layer stack (`layer` must be higher than the current layer). - -`TG(layer)` - toggles a layer on or off. As with `MO()`, you should set this key as `KC_TRNS` in the destination layer so that tapping it again actually toggles back to the original layer. Only works upwards in the layer stack. - -### Fun with modifier keys - -* `LSFT(kc)` - applies left Shift to *kc* (keycode) - `S(kc)` is an alias -* `RSFT(kc)` - applies right Shift to *kc* -* `LCTL(kc)` - applies left Control to *kc* -* `RCTL(kc)` - applies right Control to *kc* -* `LALT(kc)` - applies left Alt to *kc* -* `RALT(kc)` - applies right Alt to *kc* -* `LGUI(kc)` - applies left GUI (command/win) to *kc* -* `RGUI(kc)` - applies right GUI (command/win) to *kc* - -You can also chain these, like this: - - LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress. - -The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols. Their long names are also available and documented in `/quantum/keymap_common.h`. - - KC_TILD ~ - KC_EXLM ! - KC_AT @ - KC_HASH # - KC_DLR $ - KC_PERC % - KC_CIRC ^ - KC_AMPR & - KC_ASTR * - KC_LPRN ( - KC_RPRN ) - KC_UNDS _ - KC_PLUS + - KC_LCBR { - KC_RCBR } - KC_PIPE | - KC_COLN : - -`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down. - -These are the values you can use for the `mod` in `MT()` (right-hand modifiers are not available): - - * MOD_LCTL - * MOD_LSFT - * MOD_LALT - * MOD_LGUI - -These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped. - -We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact: - - * `CTL_T(kc)` - is LCTL when held and *kc* when tapped - * `SFT_T(kc)` - is LSFT when held and *kc* when tapped - * `ALT_T(kc)` - is LALT when held and *kc* when tapped - * `GUI_T(kc)` - is LGUI when held and *kc* when tapped - * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/) - -### Temporarily setting the default layer - -`DF(layer)` - sets default layer to *layer*. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does. - -### Remember: These are just aliases - -These functions work the same way that their `ACTION_*` functions do - they're just quick aliases. To dig into all of the tmk ACTION_* functions, please see the [TMK documentation](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/doc/keymap.md#2-action). - -Instead of using `FNx` when defining `ACTION_*` functions, you can use `F(x)` - the benefit here is being able to use more than 32 function actions (up to 4096), if you happen to need them. - -## Macro shortcuts: Send a whole string when pressing just one key - -Instead of using the `ACTION_MACRO` function, you can simply use `M(n)` to access macro *n* - *n* will get passed into the `action_get_macro` as the `id`, and you can use a switch statement to trigger it. This gets called on the keydown and keyup, so you'll need to use an if statement testing `record->event.pressed` (see keymap_default.c). - -```c -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. -{ - switch(id) { - case 0: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(255), T(H), T(E), T(L), T(L), W(255), T(O), END ); // this sends the string 'hello' when the macro executes - } - break; - } - return MACRO_NONE; -}; -``` -A macro can include the following commands: - -* I() change interval of stroke in milliseconds. -* D() press key. -* U() release key. -* T() type key(press and release). -* W() wait (milliseconds). -* END end mark. - -So above you can see the stroke interval changed to 255ms between each keystroke, then a bunch of keys being typed, waits a while, then the macro ends. - -Note: Using macros to have your keyboard send passwords for you is a bad idea. - -### Additional keycode aliases for software-implemented layouts (Colemak, Dvorak, etc) - -Everything is assuming you're in Qwerty (in software) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap: - - #include "keymap_<layout>.h" - -Where <layout> is "colemak" or "dvorak". After including this line, you will get access to: - - * `CM_*` for all of the Colemak-equivalent characters - * `DV_*` for all of the Dvorak-equivalent characters - -These implementations assume you're using Colemak or Dvorak on your OS, not on your keyboard - this is referred to as a software-implemented layout. If your computer is in Qwerty and your keymap is in Colemak or Dvorak, this is referred to as a firmware-implemented layout, and you won't need these features. - -To give an example, if you're using software-implemented Colemak, and want to get an `F`, you would use `CM_F` - `KC_F` under these same circumstances would result in `T`. - -## Additional language support - -In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware (but it's being worked on - see Unicode support). - -## Unicode support - -You can currently send 4 hex digits with your OS-specific modifier key (RALT for OSX with the "Unicode Hex Input" layout) - this is currently limited to supporting one OS at a time, and requires a recompile for switching. 8 digit hex codes are being worked on. The keycode function is `UC(n)`, where *n* is a 4 digit hexidecimal. Enable from the Makefile. - -## Other firmware shortcut keycodes - -* `RESET` - puts the MCU in DFU mode for flashing new firmware (with `make dfu`) -* `DEBUG` - the firmware into debug mode - you'll need hid_listen to see things -* `BL_ON` - turns the backlight on -* `BL_OFF` - turns the backlight off -* `BL_<n>` - sets the backlight to level *n* -* `BL_INC` - increments the backlight level by one -* `BL_DEC` - decrements the backlight level by one -* `BL_TOGG` - toggles the backlight -* `BL_STEP` - steps through the backlight levels - -Enable the backlight from the Makefile. - -## MIDI functionalty - -This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile. - -## Bluetooth functionality - -This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will. - -## Building - -Download or clone the whole firmware and navigate to the keyboards/atreus folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build with the default keymap, simply run `make default`. +Keyboard Maintainer: QMK Community +Hardware Supported: Atreus PCB +Hardware Availability: https://atreus.technomancy.us -### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. +Make example for this keyboard (after setting up your build environment): -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + make atreus-default -``` -$ make [default|jack|<name>] -``` -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/atreus62/readme.md b/keyboards/atreus62/readme.md index 0245b4f9f0..d68d1b615b 100644 --- a/keyboards/atreus62/readme.md +++ b/keyboards/atreus62/readme.md @@ -1,10 +1,16 @@ -atreus62 keyboard firmware -====================== +Atreus +=== -This firmware is for the atreus62 keyboard. - -This version utilizes a Pro Micro for its controller and has a 62 key layout. +A 62 key variant of the Atreus keyboard. https://github.com/profet23/atreus62 -TODO: More information
\ No newline at end of file +Keyboard Maintainer: QMK Community +Hardware Supported: Atreus62 PCB +Hardware Availability: http://shop.profetkeyboards.com/product/atreus62-keyboard + +Make example for this keyboard (after setting up your build environment): + + make atreus62-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/bananasplit/Makefile b/keyboards/bananasplit/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/bananasplit/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/bananasplit/README.md b/keyboards/bananasplit/README.md new file mode 100644 index 0000000000..b059a0834d --- /dev/null +++ b/keyboards/bananasplit/README.md @@ -0,0 +1,29 @@ +# BananaSplit60 keyboard firmware + +Ported from evangs/tmk_keyboard + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/bananasplit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/bananasplit/bananasplit.c b/keyboards/bananasplit/bananasplit.c new file mode 100644 index 0000000000..1aa8fb1745 --- /dev/null +++ b/keyboards/bananasplit/bananasplit.c @@ -0,0 +1,28 @@ +#include "bananasplit.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/bananasplit/bananasplit.h b/keyboards/bananasplit/bananasplit.h new file mode 100644 index 0000000000..fa4c13258b --- /dev/null +++ b/keyboards/bananasplit/bananasplit.h @@ -0,0 +1,142 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef BANANASPLIT_H +#define BANANASPLIT_H + +#include "quantum.h" + +/* +------------------------------------------------------------------------------------------- +| K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | +------------------------------------------------------------------------------------------- +| K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | +------------------------------------------------------------------------------------------- +| K20 | K21 | K22 | K23 | K24 | K25 | K26 | K27 | K28 | K29 | K2A | K2B | K2C | +------------------------------------------------------------------------------------------- +| K30 | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | K3D | +------------------------------------------------------------------------------------------- +| K40 | K41 | K42 | K44 | K45 | K46 | K48 | K49 | K4A | K4B | K4C | +------------------------------------------------------------------------------------------- +*/ +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K44, K45, K46, K48, K49, K4A, K4B, K4C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, K4A, K4B, K4C, KC_NO } \ +} +/* Here is the above keymap filled with KC_TRNS. It's a useful starting point when defining layers. +KEYMAP( \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,\ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______ \ +) +*/ + +#define KEYMAP_HHKBANANA( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K42, K44, K45, K46, K48, K49, K4A, K4B, K4C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \ + { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, K4A, K4B, K4C, KC_NO } \ +} + +#define KEYMAP_ANSI( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K42, K45, K48, K49, K4B, K4C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, K48, K49, KC_NO, K4B, K4C, KC_NO } \ +} + +#define KEYMAP_ISO( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K42, K45, K48, K49, K4B, K4C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, K48, K49, KC_NO, K4B, K4C, KC_NO } \ +} + +/* +------------------------------------------------------------------------------------------- +| K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | K2D | +------------------------------------------------------------------------------------------- +| K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | +------------------------------------------------------------------------------------------- +| K20 | K21 | K22 | K23 | K24 | K25 | K26 | K27 | K28 | K29 | K2A | K2B | K2C | +------------------------------------------------------------------------------------------- +| K30 | K31 | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | K3D | +------------------------------------------------------------------------------------------- +| K40 | K41 | K42 | K44 | K45 | K46 | K48 | K49 | K4A | K4B | K4C | +------------------------------------------------------------------------------------------- +*/ +#define KEYMAP_ALL( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K44, K45, K46, K48, K49, K4A, K4B, K4C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, K4A, K4B, K4C, KC_NO } \ +} + +#define KEYMAP_HHKB_ARROW( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,\ + K40, K41, K42, K44, K45, K46, K48, K49, K4A, K4B, K4C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, K4A, K4B, K4C, KC_NO } \ +} + + +#endif diff --git a/keyboards/bananasplit/config.h b/keyboards/bananasplit/config.h new file mode 100644 index 0000000000..4bb5b85e05 --- /dev/null +++ b/keyboards/bananasplit/config.h @@ -0,0 +1,84 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEAE +#define PRODUCT_ID 0x8870 +#define DEVICE_VER 0x0001 +#define MANUFACTURER TheVan Keyboards +#define PRODUCT BananaSplit 60 +#define DESCRIPTION keyboard firmware for BananaSplit 60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +#define MATRIX_ROW_PINS { B0, B2, B4, B5, B6 } +#define MATRIX_COL_PINS { F5, B1, F0, F1, F4, B3, D7, D6, D4, D5, D3, D2, D1, D0 } +#define UNUSED_PINS + +#define DIODE_DIRECTION ROW2COL + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 1 + +/* mapping backlight LEDs to correct Pin */ +#define BACKLIGHT_PIN B7 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 +#define TAPPING_TERM 175 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/bananasplit/keymaps/0010/Makefile b/keyboards/bananasplit/keymaps/0010/Makefile new file mode 100644 index 0000000000..7d09c322e5 --- /dev/null +++ b/keyboards/bananasplit/keymaps/0010/Makefile @@ -0,0 +1,37 @@ +# Copyright 2017 Balz Guenat +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + + +# QMK Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +# BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +# MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +# EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +# CONSOLE_ENABLE = no # Console for debug(+400) +# COMMAND_ENABLE = yes # Commands for debug and configuration +# NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +# MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +# AUDIO_ENABLE = no # Audio output on port C6 +# UNICODE_ENABLE = no # Unicode +# BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +# RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +# SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/whitefox/animations.h b/keyboards/bananasplit/keymaps/0010/config.h index 6d8b9830d9..060f5922f2 100644 --- a/keyboards/whitefox/animations.h +++ b/keyboards/bananasplit/keymaps/0010/config.h @@ -1,4 +1,4 @@ -/* Copyright 2017 Fred Sundvik +/* Copyright 2017 Balz Guenat * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,17 +14,11 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ -#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H -#include "visualizer.h" +#include "../../config.h" -// You can use these default animations, but of course you can also write your own custom ones instead -extern keyframe_animation_t default_startup_animation; -extern keyframe_animation_t default_suspend_animation; +// place overrides here -// An animation for testing and demonstrating the led support, should probably not be used for real world -// cases -extern keyframe_animation_t led_test_animation; - -#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */ +#endif diff --git a/keyboards/bananasplit/keymaps/0010/keymap.c b/keyboards/bananasplit/keymaps/0010/keymap.c new file mode 100644 index 0000000000..a1795a1ef4 --- /dev/null +++ b/keyboards/bananasplit/keymaps/0010/keymap.c @@ -0,0 +1,73 @@ +/* Copyright 2017 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bananasplit.h" + +#define ______ KC_TRNS + +/* + This switch layout is ANSI with the following modifications: + Split right shift + 225 125 275 spacebar + Bottom right singles +*/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* +------------------------------------------------------------------------------------------- +|Esc| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Backspace | +------------------------------------------------------------------------------------------- +| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | +------------------------------------------------------------------------------------------- +| Cpslock | A | S | D | F | G | H | J | K | L | ; | ' | Enter | +------------------------------------------------------------------------------------------- +| Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Up | +------------------------------------------------------------------------------------------- +| Ctrl | GUI | Alt | L1(Space) | LED | Space | Home | End | Left |Rght |Down | +------------------------------------------------------------------------------------------- +*/ +[0] = KEYMAP( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,\ + KC_LCTL, KC_LGUI, KC_LALT, LT(1,KC_SPACE), BL_TOGG, KC_SPC, KC_HOME, KC_END, KC_LEFT, KC_RGHT, KC_DOWN \ +), +/* +------------------------------------------------------------------------------------------- +| ~ | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | DEL | +------------------------------------------------------------------------------------------- +| | | UP | | | | | | | | | | | PrtSc | +------------------------------------------------------------------------------------------- +| |Left | Down |Right | | | | | | | | | | SLEEP | +------------------------------------------------------------------------------------------- +| | | | | | | | | | | | | | | +------------------------------------------------------------------------------------------- +| | | | | Reset | | | | | | +------------------------------------------------------------------------------------------- +*/ +[1] = KEYMAP( \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + ______, ______, KC_UP, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, \ + ______, KC_LEFT, KC_DOWN, KC_RGHT, ______, ______, ______, ______, ______, ______, ______, ______, KC_SLEP, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_PGUP, \ + ______, ______, ______, ______, RESET, ______, ______, ______, ______, ______, KC_PGDN \ +), +}; + + +const uint16_t PROGMEM fn_actions[] = { +}; diff --git a/keyboards/bananasplit/keymaps/coloneljesus/Makefile b/keyboards/bananasplit/keymaps/coloneljesus/Makefile new file mode 100644 index 0000000000..7d09c322e5 --- /dev/null +++ b/keyboards/bananasplit/keymaps/coloneljesus/Makefile @@ -0,0 +1,37 @@ +# Copyright 2017 Balz Guenat +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + + +# QMK Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +# BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +# MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +# EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +# CONSOLE_ENABLE = no # Console for debug(+400) +# COMMAND_ENABLE = yes # Commands for debug and configuration +# NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +# MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +# AUDIO_ENABLE = no # Audio output on port C6 +# UNICODE_ENABLE = no # Unicode +# BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +# RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +# SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergodox/infinity/animations.h b/keyboards/bananasplit/keymaps/coloneljesus/config.h index 6d8b9830d9..af6cf8ef1f 100644 --- a/keyboards/ergodox/infinity/animations.h +++ b/keyboards/bananasplit/keymaps/coloneljesus/config.h @@ -1,4 +1,4 @@ -/* Copyright 2017 Fred Sundvik +/* Copyright 2017 Balz Guenat * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,17 +14,12 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ -#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H -#include "visualizer.h" +#include "../../config.h" -// You can use these default animations, but of course you can also write your own custom ones instead -extern keyframe_animation_t default_startup_animation; -extern keyframe_animation_t default_suspend_animation; +// place overrides here +#define GRAVE_ESC_CTRL_OVERRIDE -// An animation for testing and demonstrating the led support, should probably not be used for real world -// cases -extern keyframe_animation_t led_test_animation; - -#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */ +#endif diff --git a/keyboards/bananasplit/keymaps/coloneljesus/keymap.c b/keyboards/bananasplit/keymaps/coloneljesus/keymap.c new file mode 100644 index 0000000000..5d67079f81 --- /dev/null +++ b/keyboards/bananasplit/keymaps/coloneljesus/keymap.c @@ -0,0 +1,96 @@ +/* Copyright 2017 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "bananasplit.h" + +#define ______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* +------------------------------------------------------------------------------------------- +|GvEsc| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Backspace | +------------------------------------------------------------------------------------------- +| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | +------------------------------------------------------------------------------------------- +| Fn1 | A | S | D | F | G | H | J | K | L | ; | ' | Enter | +------------------------------------------------------------------------------------------- +| Shift | Z | X | C | V | B | N | M | , | . | / | Shift |M(0) | +------------------------------------------------------------------------------------------- +| Ctrl | GUI | Alt | Space | Fn1 | Space | Alt | GUI | App | Ctrl | +------------------------------------------------------------------------------------------- +*/ +[0] = KEYMAP( \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, M(0),\ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_NO, KC_APP, KC_RCTL \ +), +/* +------------------------------------------------------------------------------------------- +| | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | +------------------------------------------------------------------------------------------- +| CpsLck |Prev |Vol+ |Next |PgUp | Ins |Home |WrdL |WrdR | End | | | | PrtSc | +------------------------------------------------------------------------------------------- +| TRNS |Mute |Vol- |Play |PgDn | Del |Left |Down | Up |Right| | | | +------------------------------------------------------------------------------------------- +| | | | | | |DelWL|DelWR| | | | | | +------------------------------------------------------------------------------------------- +| | | | | TRNS | | | | | Reset | +------------------------------------------------------------------------------------------- +*/ +[1] = KEYMAP( \ + ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ______, \ + KC_CAPS, KC_MPRV, KC_VOLU, KC_MNXT, KC_PGUP, KC_INS, KC_HOME, LCTL(KC_LEFT), LCTL(KC_RGHT), KC_END, ______, ______, ______, KC_PSCR, \ + ______, KC_MUTE, KC_VOLD, KC_MPLY, KC_PGDN, KC_DEL, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, LCTL(KC_BSPC), LCTL(KC_DEL), ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, RESET \ +), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch(id) { + case 0: + // Sends Alt+Shift on both key down and key up. + // Fesigned to switch between two keyboard layouts on Windows using a locking switch. + // Does nothing if right shift is pressed for easier resync. + if (!(get_mods() & MOD_BIT(KC_RSFT))) + return MACRO(D(LALT), T(LSFT), U(LALT), END); + else + return MACRO_NONE; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/bananasplit/keymaps/coloneljesus/readme.md b/keyboards/bananasplit/keymaps/coloneljesus/readme.md new file mode 100644 index 0000000000..b9ce5f44a1 --- /dev/null +++ b/keyboards/bananasplit/keymaps/coloneljesus/readme.md @@ -0,0 +1,33 @@ +# /u/Coloneljesus's keymap for the Bananasplit + +Default layer: + +``` +------------------------------------------------------------------------------------------- +|GvEsc| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Backspace | +------------------------------------------------------------------------------------------- +| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | +------------------------------------------------------------------------------------------- +| Fn1 | A | S | D | F | G | H | J | K | L | ; | ' | Enter | +------------------------------------------------------------------------------------------- +| Shift | Z | X | C | V | B | N | M | , | . | / | Shift | +------------------------------------------------------------------------------------------- +| Ctrl | GUI | Alt | Space | Fn1 | Space | Alt | GUI | App | Ctrl | +------------------------------------------------------------------------------------------- +``` + +Fn1 layer: + +``` +------------------------------------------------------------------------------------------- +| | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | +------------------------------------------------------------------------------------------- +| CpsLck |Prev |Vol+ |Next |PgUp | Ins |Home |WrdL |WrdR | End | | | | PrtSc | +------------------------------------------------------------------------------------------- +| TRNS |Mute |Vol- |Play |PgDn | Del |Left |Down | Up |Right| | | | +------------------------------------------------------------------------------------------- +| | | | | | |DelWL|DelWR| | | | | +------------------------------------------------------------------------------------------- +| | | | | TRNS | | | | | Reset | +------------------------------------------------------------------------------------------- +```
\ No newline at end of file diff --git a/keyboards/bananasplit/keymaps/default/Makefile b/keyboards/bananasplit/keymaps/default/Makefile new file mode 100644 index 0000000000..7d09c322e5 --- /dev/null +++ b/keyboards/bananasplit/keymaps/default/Makefile @@ -0,0 +1,37 @@ +# Copyright 2017 Balz Guenat +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + + +# QMK Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +# BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +# MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +# EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +# CONSOLE_ENABLE = no # Console for debug(+400) +# COMMAND_ENABLE = yes # Commands for debug and configuration +# NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +# MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +# AUDIO_ENABLE = no # Audio output on port C6 +# UNICODE_ENABLE = no # Unicode +# BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +# RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +# SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/bananasplit/keymaps/default/config.h b/keyboards/bananasplit/keymaps/default/config.h new file mode 100644 index 0000000000..060f5922f2 --- /dev/null +++ b/keyboards/bananasplit/keymaps/default/config.h @@ -0,0 +1,24 @@ +/* Copyright 2017 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/bananasplit/keymaps/default/keymap.c b/keyboards/bananasplit/keymaps/default/keymap.c new file mode 100644 index 0000000000..f07278df9b --- /dev/null +++ b/keyboards/bananasplit/keymaps/default/keymap.c @@ -0,0 +1,25 @@ +#include "bananasplit.h" + +#define DEFAULT_LAYER 0 +#define LAYER_1 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DEFAULT_LAYER] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, _______, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_ENT, MO(LAYER_1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + + [LAYER_1] = KEYMAP( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; diff --git a/keyboards/bananasplit/keymaps/default/readme.md b/keyboards/bananasplit/keymaps/default/readme.md new file mode 100644 index 0000000000..aaf6daa08c --- /dev/null +++ b/keyboards/bananasplit/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for the Bananasplit diff --git a/keyboards/bananasplit/keymaps/hhkbanana/keymap.c b/keyboards/bananasplit/keymaps/hhkbanana/keymap.c new file mode 100644 index 0000000000..10593de8db --- /dev/null +++ b/keyboards/bananasplit/keymaps/hhkbanana/keymap.c @@ -0,0 +1,25 @@ +#include "bananasplit.h" + +#define DEFAULT_LAYER 0 +#define LAYER_1 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DEFAULT_LAYER] = KEYMAP_HHKBANANA( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_PSCR, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_ENT, MO(LAYER_1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT \ + ), + + [LAYER_1] = KEYMAP_HHKBANANA( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; diff --git a/keyboards/bananasplit/keymaps/nic/keymap.c b/keyboards/bananasplit/keymaps/nic/keymap.c new file mode 100644 index 0000000000..f9794b5b10 --- /dev/null +++ b/keyboards/bananasplit/keymaps/nic/keymap.c @@ -0,0 +1,45 @@ +#include "bananasplit.h" + +#define DEFAULT_LAYER 0 +#define THUMB_LAYER 1 +#define NORMAN_LAYER 2 +#define MOD_LAYER 3 + +#define HYPER_TAB ALL_T(KC_TAB) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DEFAULT_LAYER] = KEYMAP_HHKB_ARROW( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, \ + HYPER_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, TG(NORMAN_LAYER), \ + KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, MO(THUMB_LAYER), KC_SPC, KC_LGUI, KC_LALT, KC_LEFT, KC_DOWN, KC_RIGHT \ + ), + + [THUMB_LAYER] = KEYMAP_HHKB_ARROW( \ + MO(MOD_LAYER), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + + [NORMAN_LAYER] = KEYMAP_HHKB_ARROW( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_D, KC_F, KC_K, KC_J, KC_U, KC_R, KC_L, KC_SCLN, _______, _______, _______, \ + _______, _______, _______, KC_E, KC_T, _______, KC_Y, KC_N, KC_I, KC_O, KC_H, _______, _______, \ + _______, _______, _______, _______, _______, _______, KC_P, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + + [MOD_LAYER] = KEYMAP_HHKB_ARROW( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; diff --git a/keyboards/bananasplit/rules.mk b/keyboards/bananasplit/rules.mk new file mode 100644 index 0000000000..04579d4ce6 --- /dev/null +++ b/keyboards/bananasplit/rules.mk @@ -0,0 +1,65 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE = yes + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax diff --git a/keyboards/bantam44/readme.md b/keyboards/bantam44/readme.md index 462f67c124..494800958e 100644 --- a/keyboards/bantam44/readme.md +++ b/keyboards/bantam44/readme.md @@ -1,25 +1,14 @@ -Bantam44 keyboard firmware -====================== +Bantam-44 +=== -## Quantum MK Firmware +A small mechanical keyboard. -For the full Quantum feature list, see [the parent readme.md](/readme.md). +Keyboard Maintainer: QMK Community +Hardware Supported: Bantam-44 PCB +Hardware Availability: http://www.bantamkeyboards.com -## Building +Make example for this keyboard (after setting up your build environment): -Download or clone the whole firmware and navigate to the keyboards/Bantam44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + make bantam44-default -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build with the default keymap, simply run `make default`. - -### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/clueboard/keymaps/bloodlvst/Makefile b/keyboards/clueboard/keymaps/bloodlvst/Makefile new file mode 100644 index 0000000000..b1c2f32f6a --- /dev/null +++ b/keyboards/clueboard/keymaps/bloodlvst/Makefile @@ -0,0 +1,2 @@ +EXTRAKEY_ENABLE = yes +COMMAND_ENABLE = no diff --git a/keyboards/clueboard/keymaps/bloodlvst/config.h b/keyboards/clueboard/keymaps/bloodlvst/config.h new file mode 100644 index 0000000000..320401dbda --- /dev/null +++ b/keyboards/clueboard/keymaps/bloodlvst/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define PREVENT_STUCK_MODIFIERS +#define DISABLE_SPACE_CADET_ROLLOVER +#endif diff --git a/keyboards/clueboard/keymaps/bloodlvst/keymap.c b/keyboards/clueboard/keymaps/bloodlvst/keymap.c new file mode 100644 index 0000000000..bedb658eaa --- /dev/null +++ b/keyboards/clueboard/keymaps/bloodlvst/keymap.c @@ -0,0 +1,41 @@ +#include "clueboard.h" + +// Helpful defines +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_INS, KC_DEL, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSPO, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSPC, KC_UP, \ + KC_LCTL, KC_LGUI, MO(_FL), KC_LALT, KC_BSPC,KC_SPC, KC_RALT, KC_APP, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_END, KC_VOLU, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,KC_SLCK, KC_PAUS, _______, _______, KC_MUTE, KC_VOLD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, KC_PSCR, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_MPLY, \ + _______, KC_MYCM, MO(_FL), _______, _______,_______, _______, KC_CALC, MO(_FL), _______, KC_MPRV, KC_MSTP, KC_MNXT), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + KC_PWR, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, RGB_MOD, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,RGB_HUD, RGB_HUI, _______, _______, _______, KC_WAKE, \ + _______, _______, MO(_FL), _______, RGB_SAD,RGB_SAI, _______, _______, MO(_FL), _______, _______, KC_SLEP, _______), +}; diff --git a/keyboards/clueboard/keymaps/bloodlvst/readme.md b/keyboards/clueboard/keymaps/bloodlvst/readme.md new file mode 100644 index 0000000000..ee287ca476 --- /dev/null +++ b/keyboards/clueboard/keymaps/bloodlvst/readme.md @@ -0,0 +1,17 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + +![Clueboard Layout Image](http://i.imgur.com/7Capi8W.png) + +# Default Clueboard Layout + +This is the default layout that comes flashed on every Clueboard. For the most +part it's a straightforward and easy to follow layout. The only unusual key is +the key in the upper left, which sends Escape normally, but Grave when any of +the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/keymaps/caps_fn/keymap.c b/keyboards/clueboard/keymaps/caps_fn/keymap.c index 7fad9c1b21..2e54fdba8a 100644 --- a/keyboards/clueboard/keymaps/caps_fn/keymap.c +++ b/keyboards/clueboard/keymaps/caps_fn/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -16,7 +15,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer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const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/colemak/keymap.c b/keyboards/clueboard/keymaps/colemak/keymap.c index 42c85ff9d8..2ed3541862 100644 --- a/keyboards/clueboard/keymaps/colemak/keymap.c +++ b/keyboards/clueboard/keymaps/colemak/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -16,71 +15,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = KEYMAP( - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_NUHS, KC_ENT, \ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ - KC_LCTL, MO(_FL), KC_LGUI,KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT), + KC_LCTL, KC_LGUI, KC_LALT,KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer */ [_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_CAPS, BL_STEP, \ - _______, _______, _______,_______,_______,_______,_______,KC_HOME,KC_PGDN,KC_PGUP, KC_END, _______, _______, _______, _______, \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_CAPS, KC_VOLU, \ + _______, _______, _______,_______,_______,_______,_______,KC_HOME,KC_PGDN,KC_PGUP, KC_END, _______, _______, _______, KC_VOLD, \ KC_DEL, _______, MO(_CL),_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP, KC_RGHT, _______, _______, _______, \ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ - _______, _______, _______,_______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + _______, _______, _______,_______, _______,_______, _______, _______, MO(_FL), _______, KC_HOME, KC_PGDN, KC_END), /* Keymap _CL: Control layer */ [_CL] = KEYMAP( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + BL_STEP, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_SAI, \ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/default/keymap.c b/keyboards/clueboard/keymaps/default/keymap.c index 7fad9c1b21..c4da561fe3 100644 --- a/keyboards/clueboard/keymaps/default/keymap.c +++ b/keyboards/clueboard/keymaps/default/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -16,71 +15,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = KEYMAP( - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_PGDN, \ + KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, \ + KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL,KC_LGUI,KC_LALT,KC_MHEN, KC_SPC, KC_SPC, KC_HENK,KC_RALT,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT), /* Keymap _FL: Function Layer */ [_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ - _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ - _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, KC_VOLU, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_MUTE, KC_VOLD, \ + _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, \ + _______,_______,_______,_______, _______,_______, _______,_______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END), /* Keymap _CL: Control layer */ [_CL] = KEYMAP( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ - _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), + BL_STEP,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RGB_TOG, RGB_VAI, \ + _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, \ + _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + MO(_FL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_SAI, \ + _______,_______,_______,_______, RGB_MOD, RGB_MOD, _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/jokrik/keymap.c b/keyboards/clueboard/keymaps/jokrik/keymap.c index acde4d9e16..dda6a8b907 100644 --- a/keyboards/clueboard/keymaps/jokrik/keymap.c +++ b/keyboards/clueboard/keymaps/jokrik/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -40,47 +39,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_SAI, \ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, MO(_FL), _______, RGB_HUD, RGB_SAD, RGB_HUI), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/mac_optimized/keymap.c b/keyboards/clueboard/keymaps/mac_optimized/keymap.c index e72733092f..e39edb4d6e 100644 --- a/keyboards/clueboard/keymaps/mac_optimized/keymap.c +++ b/keyboards/clueboard/keymaps/mac_optimized/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -16,64 +15,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = KEYMAP( - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_PGDN, \ + KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, \ + KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL,KC_LALT,KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK,KC_RGUI,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT), /* Keymap _FL: Function Layer */ [_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \ - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ - _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, KC_VOLU, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MRWD,KC_MPLY,KC_MFFD,_______,KC_MUTE, KC_VOLD, \ + _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, \ + _______,_______,_______,_______, _______,_______, _______,_______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END), /* Keymap _CL: Control layer */ [_CL] = KEYMAP( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ - _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), + BL_STEP,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RGB_TOG, RGB_VAI, \ + _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, \ + _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + MO(_FL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_SAI, \ + _______,_______,_______,_______, RGB_MOD, RGB_MOD, _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - if (record->event.pressed) { - /* The key is being pressed. - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - if (mods_pressed) { - register_code(KC_GRV); - } else { - register_code(KC_ESC); - } - } else { - /* The key is being released. - */ - if (mods_pressed) { - mods_pressed = false; - unregister_code(KC_GRV); - } else { - unregister_code(KC_ESC); - } - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/magicmonty/keymap.c b/keyboards/clueboard/keymaps/magicmonty/keymap.c index 3d00332b09..feef00e7a2 100644 --- a/keyboards/clueboard/keymaps/magicmonty/keymap.c +++ b/keyboards/clueboard/keymaps/magicmonty/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS #define xxxxxxx KC_NO @@ -45,16 +44,13 @@ // CTRL when held, ESC when tapped #define CTL_ESC CTL_T(KC_ESC) -// ESC/Grave mode -#define ESC_GRV F(0) - // Reset RGB mode to layer signalling -#define RGB_RST F(1) +#define RGB_RST F(0) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = KEYMAP( - ESC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSPC, KC_INS, \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSPC, KC_INS, \ HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \ ESC_FUN, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, KC_RSFT, KC_UP, \ @@ -116,44 +112,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(0), // Calls action_function() - [1] = ACTION_FUNCTION(1), // Calls action_function() }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - switch (id) { case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - case 1: if (record->event.pressed) { rgblight_mode(1); rgblight_sethsv(206, 255, 255); diff --git a/keyboards/clueboard/keymaps/maximised/keymap.c b/keyboards/clueboard/keymaps/maximised/keymap.c index ebaefa6690..583c520917 100644 --- a/keyboards/clueboard/keymaps/maximised/keymap.c +++ b/keyboards/clueboard/keymaps/maximised/keymap.c @@ -39,9 +39,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), }; - -const uint16_t PROGMEM fn_actions[] = { -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { -}; diff --git a/keyboards/clueboard/keymaps/mouse_keys/keymap.c b/keyboards/clueboard/keymaps/mouse_keys/keymap.c index d3108d1e2b..259fa29b74 100644 --- a/keyboards/clueboard/keymaps/mouse_keys/keymap.c +++ b/keyboards/clueboard/keymaps/mouse_keys/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -17,7 +16,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer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const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_MS_U, \ _______, _______, _______,_______, LT(_ML, KC_SPC),LT(_ML, KC_SPC), _______, KC_BTN1, KC_BTN2, KC_BTN3, KC_MS_L, KC_MS_D,KC_MS_R), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/serubin/keymap.c b/keyboards/clueboard/keymaps/serubin/keymap.c index 18446eb31d..4212e6a529 100644 --- a/keyboards/clueboard/keymaps/serubin/keymap.c +++ b/keyboards/clueboard/keymaps/serubin/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -51,53 +50,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, MO(_FL), _______, RGB_SAI, \ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() - [1] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC), -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - case 1: - if(record->event.pressed) { - del_key(KC_ESC); - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/shift_fn/keymap.c b/keyboards/clueboard/keymaps/shift_fn/keymap.c index 83ae1d6154..be29a0a174 100644 --- a/keyboards/clueboard/keymaps/shift_fn/keymap.c +++ b/keyboards/clueboard/keymaps/shift_fn/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -16,7 +15,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer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const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD,RGB_SAD,RGB_HUI), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/skully/keymap.c b/keyboards/clueboard/keymaps/skully/keymap.c index 47dee8e6d4..81e47811fa 100644 --- a/keyboards/clueboard/keymaps/skully/keymap.c +++ b/keyboards/clueboard/keymaps/skully/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -16,7 +15,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer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const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD,RGB_SAD,RGB_HUI), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/smt/keymap.c b/keyboards/clueboard/keymaps/smt/keymap.c index f097afaa8d..6797faaa3f 100644 --- a/keyboards/clueboard/keymaps/smt/keymap.c +++ b/keyboards/clueboard/keymaps/smt/keymap.c @@ -19,7 +19,6 @@ enum planck_keycodes { // Helpful defines #define _______ KC_TRNS #define XXXXXXX KC_NO -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) // Custom macros #define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl @@ -42,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `------------------------------------------------------------------' */ [_QWERTY] = KEYMAP( - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PGUP, \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PGUP, \ HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGDN, \ CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, \ KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, MO(_FL), KC_UP, \ @@ -62,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `------------------------------------------------------------------' */ [_COLEMAK] = KEYMAP( - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PGUP, \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PGUP, \ HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGDN, \ CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, \ KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, MO(_FL), KC_UP, \ @@ -82,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `------------------------------------------------------------------' */ [_DVORAK] = KEYMAP( - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, KC_PGUP, \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, KC_PGUP, \ HPR_TAB, KC_QUOT, KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSPC, KC_PGDN, \ CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, \ KC_LSFT, XXXXXXX, KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, MO(_FL), KC_UP, \ @@ -107,50 +106,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), }; -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} - void persistent_default_layer_set(uint16_t default_layer) { eeconfig_update_default_layer(default_layer); default_layer_set(default_layer); @@ -178,4 +133,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; } return true; -}
\ No newline at end of file +} diff --git a/keyboards/clueboard/keymaps/unix_optimized/keymap.c b/keyboards/clueboard/keymaps/unix_optimized/keymap.c index 7c1359954b..0de247ca0c 100644 --- a/keyboards/clueboard/keymaps/unix_optimized/keymap.c +++ b/keyboards/clueboard/keymaps/unix_optimized/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -16,7 +15,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer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const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD,RGB_HUI), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/win_optimized/keymap.c b/keyboards/clueboard/keymaps/win_optimized/keymap.c index c5553ff1fb..ad02fd59f2 100644 --- a/keyboards/clueboard/keymaps/win_optimized/keymap.c +++ b/keyboards/clueboard/keymaps/win_optimized/keymap.c @@ -1,7 +1,6 @@ #include "clueboard.h" // Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -16,7 +15,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer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const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), }; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/clueboard/keymaps/xyverz/keymap.c b/keyboards/clueboard/keymaps/xyverz/keymap.c index 4539119731..540cd79833 100644 --- a/keyboards/clueboard/keymaps/xyverz/keymap.c +++ b/keyboards/clueboard/keymaps/xyverz/keymap.c @@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `----------------------------------------------------------------------------------' */ [_BL] = KEYMAP( - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSPC, KC_PGUP, \ KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_PGDN, \ LT(_FL, KC_CAPS), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_NUHS, KC_ENT, \ KC_LSFT, KC_RO, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_SLSH, KC_RSFT, KC_UP, \ @@ -76,36 +76,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), }; -enum function_id { - SHIFT_ESC, -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(SHIFT_ESC), -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; - switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; - if (record->event.pressed) { - if (shift_esc_shift_mask) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (shift_esc_shift_mask) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md index 4a76e2908c..95b69befcf 100644 --- a/keyboards/clueboard/readme.md +++ b/keyboards/clueboard/readme.md @@ -1,97 +1,17 @@ -Clueboard keyboard firmware -====================== +# Clueboard 66% -DIY/Assembled compact 66% keyboard by [Clueboard](http://clueboard.co). +![Clueboard](https://static1.squarespace.com/static/55c13bdee4b099be5dcb82eb/t/5867eeaad2b857fd0d196f4b/1494021396651/IMGP4201.jpg?format=1500w) -For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). +A fully customizable 66% keyboard. -## First Time Setup +* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) +* Hardware Supported: Clueboard 66% PCB + * rev1 (1.0) + * rev2 (2.0, 2.0.1, 2.1, 2.5, 2.5.1, 2.6) +* Hardware Availability: [clueboard.co](https://clueboard.co/) -Download or clone the whole firmware and navigate to the keyboards/clueboard directory. Once your dev env is setup, you'll be able to generate the default .hex: +Make example for this keyboard (after setting up your build environment): -``` -$ make -``` + make cluepad-default -You will see a lot of output and if everything worked correctly you will see something similar to this: - -``` -Size after: - text data bss dec hex filename - 0 19992 0 19992 4e18 clueboard_rev2_default.hex -``` - -At this point you can press RESET on your Clueboard and flash your keyboard with this command: - -``` -$ make dfu -``` - -If you would like to use one of the alternative keymaps, or create your own, see below. - -## Clueboard 1.0 - -If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `rev1` to your make command, like this: - -``` -$ make rev1 -``` - -And when flashing your keyboard: - -``` -$ make rev1-dfu -``` - -If you are flashing an alternative layout to your rev1, include both `rev1` and `<keymap>` in your command, for example when flashing max: - -``` -$ make rev1-max-dfu -``` - -## Alternate Keymaps - -There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `<keymap>` to your command: - -``` -$ make skully -``` - -And when flashing your keyboard, put `<keymap>` between "make" and "dfu": - -``` -$ make skully-dfu -``` - -### Notable Layouts - -These layouts are notable for one reason or another. If you are looking for ideas or inspiration you should look at these first: - -* [keymaps/default](keymaps/default) - The default Clueboard layout -* [keymaps/max](keymaps/max) - A maximised layout that makes use of every key and feature of the Clueboard 2.0 PCB. -* [keymaps/skully](keymaps/skully) - The layout that @skullydazed uses on his own Clueboards. - -## Create Your Own Keymap - -There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. As a way to get started, here is the procedure I recommend: - -* Copy `[keymaps/default](keymaps/default/)` to `keymaps/<your_layout>`. -* Compile the firmware (`$ make <your_layout>`) -* Flash the firmware (`$ make <your_layout>-dfu`) -* Make sure everything works like the default keyboard -* Modify `keymaps/<your_layout>/readme.md` to tell others about your layout. -* Modify `keymaps/<your_layout>/keymap.c` to reflect your desired layout. -* Compile your new custom firmware (`$ make <your_layout>`) -** If you have warnings you may flash without fixing them, but something may not work right. -** If you have any errors you must fix them before continuing. -* Flash the firmware (`$ make <your_layout>-dfu`) - -## Share Your Keymap - -Got your layout dialed in? Please share it with the world so we can benefit from your work! Simply submit a pull request with your layout and we'll include it in the official repository. Please use the following guidelines when putting together your pull request: - -* Include a readme.md that states what your primary keyboard use is, how your layout differs from the default, and highlights anything you think makes your layout particularly great. -* If your layout requires certain features (EG, RGB underlight or backlighting) ensure you have a Makefile and config.h that reflects that -* If your layout requires special hardware to be added, please describe that in the readme.md - -TODO: Write up or link quick how-to on creating and submitting a PR. (Pull requests accepted. :) +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/clueboard/rules.mk b/keyboards/clueboard/rules.mk index f852a01840..74bfcfe745 100644 --- a/keyboards/clueboard/rules.mk +++ b/keyboards/clueboard/rules.mk @@ -92,7 +92,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/cluecard/readme.md b/keyboards/cluecard/readme.md index be13fc0171..d9daa0b2b5 100644 --- a/keyboards/cluecard/readme.md +++ b/keyboards/cluecard/readme.md @@ -1,28 +1,13 @@ -cluecard keyboard firmware -====================== +# Cluecard -## Quantum MK Firmware +A simple QMK dev kit. -For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). +* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) +* Hardware Supported: Cluecard 1.0 +* Hardware Availability: Special gift from [skullydazed](https://github.com/skullydazed) -## Building +Make example for this keyboard (after setting up your build environment): -Download or clone the whole firmware and navigate to the keyboards/cluecard folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + make cluecard-default -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/cluepad/readme.md b/keyboards/cluepad/readme.md index 8450340f27..f79d6b5594 100644 --- a/keyboards/cluepad/readme.md +++ b/keyboards/cluepad/readme.md @@ -1,4 +1,15 @@ -Cluepad number pad firmware -====================== +# Cluepad -TODO: to be updated. +![Cluepad](https://static1.squarespace.com/static/55c13bdee4b099be5dcb82eb/5842fbdce3df28eae5ec557e/5844fb2cb8a79bbdfd63bad1/1498501250178/IMGP3931.jpg?format=750w) + +A basic 17 key numpad PCB. + +* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) +* Hardware Supported: Cluepad PCB 1.0 +* Hardware Availability: [clueboard.co](https://clueboard.co/) + +Make example for this keyboard (after setting up your build environment): + + make cluepad-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/converter/usb_usb/Makefile b/keyboards/converter/usb_usb/Makefile new file mode 100644 index 0000000000..bd09e5885d --- /dev/null +++ b/keyboards/converter/usb_usb/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif diff --git a/keyboards/converter/usb_usb/README.md b/keyboards/converter/usb_usb/README.md new file mode 100644 index 0000000000..274e11956e --- /dev/null +++ b/keyboards/converter/usb_usb/README.md @@ -0,0 +1,84 @@ +USB to USB keyboard protocol converter +====================================== +Original code from Hasu's TMK firmware. Ported to QMK by Coloneljesus. + +This port has been tested only on the Pro Micro variant described in the next section. + +See for detail and discussion. +https://geekhack.org/index.php?topic=69169.0 + + +Hardware requirement +-------------------- +There are two options. + +### TMK USB-USB Converter +You can buy a fully assembled converter from me here. + + https://geekhack.org/index.php?topic=69169.0 + +### Arduino Leonardo + Circuit@Home USB Host Shield 2.0 +Buying Arduino Leonardo and USB Host Shield 2.0(from Circuit@home) will be better, you won't need even soldering iron. + + http://arduino.cc/en/Main/ArduinoBoardLeonardo + https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino-assembled/ + +Other compatible boards like Arduino's Shield will also work well but I think Sparkfun's needs to be modified. + + http://arduino.cc/en/Main/ArduinoUSBHostShield + https://www.sparkfun.com/products/9947 + +Also Pro Micro 3.3V(not Mini) or Teensy with mini host shield will work with some fixes on signal/power routing. + + https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-for-arduino-pro-mini + https://www.sparkfun.com/products/12587 + https://www.pjrc.com/teensy/td_libs_USBHostShield.html + + + +Build firmware +-------------- +Follow normal QMK build instructions to get a binary file. Flashing depends on you hardware. + +Limitation +---------- +Only supports 'HID Boot protocol'. + +Note that the converter can host only USB "boot protocol" keyboard(6KRO), not NKRO, it is possible to support NKRO keyboard but you will need to write HID report parser for that. Every NKRO keyboard can have different HID report and it is difficult to support all kind of NKRO keyboards in the market. + + + +Keymap editor +------------- +You can editor keymap and download firmware with web brwoser. + +- http://www.tmk-kbd.com/tmk_keyboard/editor/unimap/?usb_usb + + + +Update +------ +2014/12/11 Added Hub support(confirmed with HHKB pro2) +2016/09/10 Unimap editor support +2016/10/18 Fix LED state at startup +2017/08/16 Port to QMK + + +Resource +-------- +USB Host Sheild 2.0 + https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino + https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-for-arduino-pro-mini +USB Host Sheild 2.0 source + https://github.com/felis/USB_Host_Shield_2.0 +Arduino USB Host Shield(with bootst converter) + http://arduino.cc/en/Main/ArduinoUSBHostShield +Arduino source + https://github.com/arduino/Arduino/hardware/arduino/{cores,variants} +Initial release of TMK USB-USB converter + https://geekhack.org/index.php?topic=33057.msg653549#msg653549 + http://deskthority.net/workshop-f7/is-remapping-a-usb-keyboard-using-teensy-possible-t2841-30.html#p74854 +Arduino-based hardware keyboard remapper - Colemak forum + http://forum.colemak.com/viewtopic.php?id=1561 +Teensy + Host Shield + http://www.pjrc.com/teensy/td_libs_USBHostShield.html diff --git a/keyboards/converter/usb_usb/config.h b/keyboards/converter/usb_usb/config.h new file mode 100644 index 0000000000..591d80f32d --- /dev/null +++ b/keyboards/converter/usb_usb/config.h @@ -0,0 +1,63 @@ +/* +Copyright 2017 Balz Guenat <balz.guenat@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +// do not #include "config_common.h" because the pin names conflict with the USB HID code. +// CUSTOM_MATRIX is defined it that file, though, and we need it, so we define it ourselves. +// It's a hack, yeah... +#define CUSTOM_MATRIX 2 + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x005B +#define DEVICE_VER 0x0001 +#define MANUFACTURER QMK +#define PRODUCT QMK USB-USB Converter +#define DESCRIPTION USB to USB Keyboard Converter with QMK + + +/* size of virtual matrix */ +#define MATRIX_ROWS 16 +#define MATRIX_COLS 16 + +/* matrix scanning is done in custom_matrix.cpp */ +#define DIODE_DIRECTION CUSTOM_MATRIX + +/* key combination for command */ +#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/converter/usb_usb/custom_matrix.cpp b/keyboards/converter/usb_usb/custom_matrix.cpp new file mode 100644 index 0000000000..93d13edf0b --- /dev/null +++ b/keyboards/converter/usb_usb/custom_matrix.cpp @@ -0,0 +1,238 @@ +/* +Copyright 2016 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> + +// USB HID host +#include "Usb.h" +#include "usbhub.h" +#include "hid.h" +#include "hidboot.h" +#include "parser.h" + +#include "keycode.h" +#include "util.h" +#include "print.h" +#include "debug.h" +#include "timer.h" +#include "matrix.h" +#include "led.h" +#include "host.h" +#include "keyboard.h" + + +/* KEY CODE to Matrix + * + * HID keycode(1 byte): + * Higher 5 bits indicates ROW and lower 3 bits COL. + * + * 7 6 5 4 3 2 1 0 + * +---------------+ + * | ROW | COL | + * +---------------+ + * + * Matrix space(16 * 16): + * r\c0123456789ABCDEF + * 0 +----------------+ + * : | | + * : | | + * 16 +----------------+ + */ +#define ROW_MASK 0xF0 +#define COL_MASK 0x0F +#define CODE(row, col) (((row) << 4) | (col)) +#define ROW(code) (((code) & ROW_MASK) >> 4) +#define COL(code) ((code) & COL_MASK) +#define ROW_BITS(code) (1 << COL(code)) + + +// Integrated key state of all keyboards +static report_keyboard_t keyboard_report; + +static bool matrix_is_mod = false; + +/* + * USB Host Shield HID keyboards + * This supports two cascaded hubs and four keyboards + */ +USB usb_host; +USBHub hub1(&usb_host); +USBHub hub2(&usb_host); +HIDBoot<HID_PROTOCOL_KEYBOARD> kbd1(&usb_host); +HIDBoot<HID_PROTOCOL_KEYBOARD> kbd2(&usb_host); +HIDBoot<HID_PROTOCOL_KEYBOARD> kbd3(&usb_host); +HIDBoot<HID_PROTOCOL_KEYBOARD> kbd4(&usb_host); +KBDReportParser kbd_parser1; +KBDReportParser kbd_parser2; +KBDReportParser kbd_parser3; +KBDReportParser kbd_parser4; + + +extern "C" +{ + uint8_t matrix_rows(void) { return MATRIX_ROWS; } + uint8_t matrix_cols(void) { return MATRIX_COLS; } + bool matrix_has_ghost(void) { return false; } + void matrix_init(void) { + // USB Host Shield setup + usb_host.Init(); + kbd1.SetReportParser(0, (HIDReportParser*)&kbd_parser1); + kbd2.SetReportParser(0, (HIDReportParser*)&kbd_parser2); + kbd3.SetReportParser(0, (HIDReportParser*)&kbd_parser3); + kbd4.SetReportParser(0, (HIDReportParser*)&kbd_parser4); + } + + static void or_report(report_keyboard_t report) { + // integrate reports into keyboard_report + keyboard_report.mods |= report.mods; + for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { + if (IS_ANY(report.keys[i])) { + for (uint8_t j = 0; j < KEYBOARD_REPORT_KEYS; j++) { + if (! keyboard_report.keys[j]) { + keyboard_report.keys[j] = report.keys[i]; + break; + } + } + } + } + } + + uint8_t matrix_scan(void) { + static uint16_t last_time_stamp1 = 0; + static uint16_t last_time_stamp2 = 0; + static uint16_t last_time_stamp3 = 0; + static uint16_t last_time_stamp4 = 0; + + // check report came from keyboards + if (kbd_parser1.time_stamp != last_time_stamp1 || + kbd_parser2.time_stamp != last_time_stamp2 || + kbd_parser3.time_stamp != last_time_stamp3 || + kbd_parser4.time_stamp != last_time_stamp4) { + + last_time_stamp1 = kbd_parser1.time_stamp; + last_time_stamp2 = kbd_parser2.time_stamp; + last_time_stamp3 = kbd_parser3.time_stamp; + last_time_stamp4 = kbd_parser4.time_stamp; + + // clear and integrate all reports + keyboard_report = {}; + or_report(kbd_parser1.report); + or_report(kbd_parser2.report); + or_report(kbd_parser3.report); + or_report(kbd_parser4.report); + + matrix_is_mod = true; + + dprintf("state: %02X %02X", keyboard_report.mods, keyboard_report.reserved); + for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { + dprintf(" %02X", keyboard_report.keys[i]); + } + dprint("\r\n"); + } else { + matrix_is_mod = false; + } + + uint16_t timer; + timer = timer_read(); + usb_host.Task(); + timer = timer_elapsed(timer); + if (timer > 100) { + dprintf("host.Task: %d\n", timer); + } + + static uint8_t usb_state = 0; + if (usb_state != usb_host.getUsbTaskState()) { + usb_state = usb_host.getUsbTaskState(); + dprintf("usb_state: %02X\n", usb_state); + + // restore LED state when keyboard comes up + if (usb_state == USB_STATE_RUNNING) { + dprintf("speed: %s\n", usb_host.getVbusState()==FSHOST ? "full" : "low"); + keyboard_set_leds(host_keyboard_leds()); + } + } + return 1; + } + + bool matrix_is_modified(void) { + return matrix_is_mod; + } + + bool matrix_is_on(uint8_t row, uint8_t col) { + uint8_t code = CODE(row, col); + + if (IS_MOD(code)) { + if (keyboard_report.mods & ROW_BITS(code)) { + return true; + } + } + for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { + if (keyboard_report.keys[i] == code) { + return true; + } + } + return false; + } + + matrix_row_t matrix_get_row(uint8_t row) { + uint16_t row_bits = 0; + + if (IS_MOD(CODE(row, 0)) && keyboard_report.mods) { + row_bits |= keyboard_report.mods; + } + + for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { + if (IS_ANY(keyboard_report.keys[i])) { + if (row == ROW(keyboard_report.keys[i])) { + row_bits |= ROW_BITS(keyboard_report.keys[i]); + } + } + } + return row_bits; + } + + uint8_t matrix_key_count(void) { + uint8_t count = 0; + + count += bitpop(keyboard_report.mods); + for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { + if (IS_ANY(keyboard_report.keys[i])) { + count++; + } + } + return count; + } + + void matrix_print(void) { + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < matrix_rows(); row++) { + xprintf("%02d: ", row); + print_bin_reverse16(matrix_get_row(row)); + print("\n"); + } + } + + void led_set(uint8_t usb_led) + { + kbd1.SetReport(0, 0, 2, 0, 1, &usb_led); + kbd2.SetReport(0, 0, 2, 0, 1, &usb_led); + kbd3.SetReport(0, 0, 2, 0, 1, &usb_led); + kbd4.SetReport(0, 0, 2, 0, 1, &usb_led); + } + +}; diff --git a/keyboards/converter/usb_usb/keymap.c b/keyboards/converter/usb_usb/keymap.c new file mode 100644 index 0000000000..16f2a28092 --- /dev/null +++ b/keyboards/converter/usb_usb/keymap.c @@ -0,0 +1,288 @@ +/* +Copyright 2017 Balz Guenat <balz.guenat@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "keymap_common.h" + + +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + /* 0: plain Qwerty without layer switching + * ,---------------. ,---------------. ,---------------. + * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| + * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | + * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| + * |-----------------------------------------------------------| |-----------| |---------------| |-------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| + * |-----------------------------------------------------------| `-----------' |---------------| |-------| + * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| + * |-----------------------------------------------------------| ,---. |---------------| |-------| + * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| + * |-----------------------------------------------------------| ,-----------. |---------------| |-------| + * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| + * `-----------------------------------------------------------' `-----------' `---------------' `-------' + */ + // KEYMAP_ALL( + // F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + // ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + // GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + // TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + // CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + // LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + // LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + // ), + KEYMAP_ALL( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + FN0, A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + ), + KEYMAP_ALL( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS, + GRV, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + CAPS,MPRV,VOLU,MNXT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + TRNS,MUTE,VOLD,MPLY,TRNS,TRNS,LEFT,DOWN,UP, RGHT,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS, TRNS,TRNS, TRNS,TRNS + ), +}; + +// const action_t fn_actions[] PROGMEM = {}; + +const action_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), +}; + + + +/* + * Keymap samples + */ +#if 0 + /* ANSI layout + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| + * |-----------------------------------------------------------| `-----------' |-----------| | + * |CapsL | A| S| D| F| G| H| J| K| L| ;| '| Return| | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | + * |-----------------------------------------------------------| ,-----------. |-----------| | + * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .|Ent| + * `-----------------------------------------------------------' `-----------' `---------------' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + + /* ISO layout + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| ^| Bsp| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Retn| |Del|End|PgD| | 7| 8| 9| +| + * |------------------------------------------------------` | `-----------' |-----------| | + * |CapsL | A| S| D| F| G| H| J| K| L| ;| '| #| | | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shft|\ | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3|Ent| + * |-----------------------------------------------------------| ,-----------. |-----------| | + * |Ctl|Gui|Alt| Space |HNK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .| | + * `-----------------------------------------------------------' `-----------' `---------------' + */ + KEYMAP_ISO( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,ENT, DEL, END, PGDN, P7, P8, P9, PPLS, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NUHS, P4, P5, P6, + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, PENT, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT + ), + + /* JIS layout + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| ^|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| @| [| Retn| |Del|End|PgD| | 7| 8| 9| +| + * |------------------------------------------------------` | `-----------' |-----------| | + * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| ]| | | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shft | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|Ent| + * |-----------------------------------------------------------| ,-----------. |-----------| | + * |Ctl|Gui|Alt|MHEN| Space |HENK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .| | + * `-----------------------------------------------------------' `-----------' `---------------' + */ + KEYMAP_JIS( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JPY, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, DEL, END, PGDN, P7, P8, P9, PPLS, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NUHS, P4, P5, P6, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PENT, + LCTL,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT + ), + + /* Colemak http://colemak.com + * ,-----------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| + * |-----------------------------------------------------------| + * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \| + * |-----------------------------------------------------------| + * |BackSp| A| R| S| T| D| H| N| E| I| O| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| K| M| ,| ,| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `----------------------------------------------------------' + */ + KEYMAP_ALL( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + TAB, Q, W, F, P, G, J, L, U, Y, SCLN,LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + BSPC,A, R, S, T, D, H, N, E, I, O, QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + LSFT,NUBS,Z, X, C, V, B, K, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + ), + + /* Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard + * ,-----------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]|Backspa| + * |-----------------------------------------------------------| + * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \| + * |-----------------------------------------------------------| + * |BackSp| A| O| E| U| I| D| H| T| N| S| -|Return | + * |-----------------------------------------------------------| + * |Shift | ;| Q| J| K| X| B| M| Wl V| Z|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP_ALL( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC,RBRC,JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + TAB, QUOT,COMM,DOT, P, Y, F, G, C, R, L, SLSH,EQL, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + CAPS,A, O, E, U, I, D, H, T, N, S, MINS, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + LSFT,NUBS,SCLN,Q, J, K, X, B, M, W, V, Z, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + ), + + /* Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/ + * ,-----------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| + * |-----------------------------------------------------------| + * |Tab | Q| D| R| W| B| J| F| U| P| ;| [| ]| \| + * |-----------------------------------------------------------| + * |CapsLo| A| S| H| T| G| Y| N| E| O| I| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| M| C| V| K| L| ,| ,| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP_ALL( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + TAB, Q, D, R, W, B, J, F, U, P, SCLN,LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + CAPS,A, S, H, T, G, Y, N, E, O, I, QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + LSFT,NUBS,Z, X, M, C, V, K, L, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + ), + + +/* + * SpaceFN layout + * http://geekhack.org/index.php?topic=51069.0 + */ +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: plain Qwerty + * ,---------------. ,---------------. ,---------------. + * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| + * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | + * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| + * |-----------------------------------------------------------| |-----------| |---------------| |-------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| + * |-----------------------------------------------------------| `-----------' |---------------| |-------| + * |LCtrl | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| + * |-----------------------------------------------------------| ,---. |---------------| |-------| + * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| + * |-----------------------------------------------------------| ,-----------. |---------------| |-------| + * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| + * `-----------------------------------------------------------' `-----------' `---------------' `-------' + */ + [0] = KEYMAP_ALL( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + LCTL,LGUI,LALT,MHEN,HANJ, FN0, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + ), + + /* 1: SpaceFN + * ,-----------------------------------------------------------. + * |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + * |-----------------------------------------------------------| + * |Caps | | |Esc| | | |Hom|Up |End|Psc|Slk|Pau|Ins | + * |-----------------------------------------------------------| + * | | | | | | |PgU|Lef|Dow|Rig| | | | + * |-----------------------------------------------------------| + * | | | | | |Spc|PgD|` |~ | |Men| | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [1] = KEYMAP_ALL( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS, + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + CAPS,TRNS,TRNS,ESC, TRNS,TRNS,TRNS,HOME,UP, END, PSCR,SLCK,PAUS, INS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,LEFT,DOWN,RGHT,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,SPC, PGDN,GRV, FN1, TRNS,APP, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS, TRNS,TRNS, TRNS,TRNS + ), +}; + +const action_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), + [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // tilde +}; + +#endif diff --git a/keyboards/converter/usb_usb/keymaps/coloneljesus/Makefile b/keyboards/converter/usb_usb/keymaps/coloneljesus/Makefile new file mode 100644 index 0000000000..f5c0545059 --- /dev/null +++ b/keyboards/converter/usb_usb/keymaps/coloneljesus/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../../Makefile +endif diff --git a/keyboards/converter/usb_usb/keymaps/coloneljesus/config.h b/keyboards/converter/usb_usb/keymaps/coloneljesus/config.h new file mode 100644 index 0000000000..7fa3bf328e --- /dev/null +++ b/keyboards/converter/usb_usb/keymaps/coloneljesus/config.h @@ -0,0 +1,6 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#endif diff --git a/keyboards/converter/usb_usb/keymaps/coloneljesus/keymap.c b/keyboards/converter/usb_usb/keymaps/coloneljesus/keymap.c new file mode 100644 index 0000000000..0cc66fd53d --- /dev/null +++ b/keyboards/converter/usb_usb/keymaps/coloneljesus/keymap.c @@ -0,0 +1,307 @@ +/* +Copyright 2017 Balz Guenat <balz.guenat@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "usb_usb.h" + +const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + /* 0: plain Qwerty without layer switching + * ,---------------. ,---------------. ,---------------. + * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| + * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | + * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| + * |-----------------------------------------------------------| |-----------| |---------------| |-------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| + * |-----------------------------------------------------------| `-----------' |---------------| |-------| + * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| + * |-----------------------------------------------------------| ,---. |---------------| |-------| + * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| + * |-----------------------------------------------------------| ,-----------. |---------------| |-------| + * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| + * `-----------------------------------------------------------' `-----------' `---------------' `-------' + */ + // KEYMAP_ALL( + // F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + // ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + // GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + // TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + // CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + // LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + // LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + // ), + KEYMAP_ALL( + KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, KC_HELP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_STOP, KC_AGIN, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_MENU, KC_UNDO, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PCMM, KC_SLCT, KC_COPY, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PEQL, KC_EXEC, KC_PSTE, + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_HANJ, KC_SPC, KC_HAEN, KC_HENK, KC_KANA, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT, KC_FIND, KC_CUT + ), + KEYMAP_ALL( + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______, + KC_GRV, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______,______, + KC_CAPS, KC_MPRV, KC_VOLU, KC_MNXT, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______,______, + ______, KC_MUTE, KC_VOLD, KC_MPLY, ______, ______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, ______, ______, ______, ______, ______,______,______,______, ______,______, + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______,______, ______,______, + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, RESET, ______,______,______, ______, ______,______, ______,______ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch(id) { + default: + return MACRO_NONE; + } +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} + +/* + * Keymap samples + */ +#if 0 + /* ANSI layout + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| + * |-----------------------------------------------------------| `-----------' |-----------| | + * |CapsL | A| S| D| F| G| H| J| K| L| ;| '| Return| | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | + * |-----------------------------------------------------------| ,-----------. |-----------| | + * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .|Ent| + * `-----------------------------------------------------------' `-----------' `---------------' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + + /* ISO layout + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| ^| Bsp| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Retn| |Del|End|PgD| | 7| 8| 9| +| + * |------------------------------------------------------` | `-----------' |-----------| | + * |CapsL | A| S| D| F| G| H| J| K| L| ;| '| #| | | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shft|\ | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3|Ent| + * |-----------------------------------------------------------| ,-----------. |-----------| | + * |Ctl|Gui|Alt| Space |HNK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .| | + * `-----------------------------------------------------------' `-----------' `---------------' + */ + KEYMAP_ISO( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,ENT, DEL, END, PGDN, P7, P8, P9, PPLS, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NUHS, P4, P5, P6, + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, PENT, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT + ), + + /* JIS layout + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| ^|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| @| [| Retn| |Del|End|PgD| | 7| 8| 9| +| + * |------------------------------------------------------` | `-----------' |-----------| | + * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| ]| | | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shft | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|Ent| + * |-----------------------------------------------------------| ,-----------. |-----------| | + * |Ctl|Gui|Alt|MHEN| Space |HENK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .| | + * `-----------------------------------------------------------' `-----------' `---------------' + */ + KEYMAP_JIS( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JPY, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, DEL, END, PGDN, P7, P8, P9, PPLS, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NUHS, P4, P5, P6, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PENT, + LCTL,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT + ), + + /* Colemak http://colemak.com + * ,-----------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| + * |-----------------------------------------------------------| + * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \| + * |-----------------------------------------------------------| + * |BackSp| A| R| S| T| D| H| N| E| I| O| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| K| M| ,| ,| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `----------------------------------------------------------' + */ + KEYMAP_ALL( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + TAB, Q, W, F, P, G, J, L, U, Y, SCLN,LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + BSPC,A, R, S, T, D, H, N, E, I, O, QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + LSFT,NUBS,Z, X, C, V, B, K, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + ), + + /* Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard + * ,-----------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]|Backspa| + * |-----------------------------------------------------------| + * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \| + * |-----------------------------------------------------------| + * |BackSp| A| O| E| U| I| D| H| T| N| S| -|Return | + * |-----------------------------------------------------------| + * |Shift | ;| Q| J| K| X| B| M| Wl V| Z|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP_ALL( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC,RBRC,JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + TAB, QUOT,COMM,DOT, P, Y, F, G, C, R, L, SLSH,EQL, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + CAPS,A, O, E, U, I, D, H, T, N, S, MINS, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + LSFT,NUBS,SCLN,Q, J, K, X, B, M, W, V, Z, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + ), + + /* Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/ + * ,-----------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| + * |-----------------------------------------------------------| + * |Tab | Q| D| R| W| B| J| F| U| P| ;| [| ]| \| + * |-----------------------------------------------------------| + * |CapsLo| A| S| H| T| G| Y| N| E| O| I| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| M| C| V| K| L| ,| ,| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP_ALL( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + TAB, Q, D, R, W, B, J, F, U, P, SCLN,LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + CAPS,A, S, H, T, G, Y, N, E, O, I, QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + LSFT,NUBS,Z, X, M, C, V, K, L, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + ), + + +/* + * SpaceFN layout + * http://geekhack.org/index.php?topic=51069.0 + */ +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: plain Qwerty + * ,---------------. ,---------------. ,---------------. + * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| + * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | + * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| + * |-----------------------------------------------------------| |-----------| |---------------| |-------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| + * |-----------------------------------------------------------| `-----------' |---------------| |-------| + * |LCtrl | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| + * |-----------------------------------------------------------| ,---. |---------------| |-------| + * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| + * |-----------------------------------------------------------| ,-----------. |---------------| |-------| + * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| + * `-----------------------------------------------------------' `-----------' `---------------' `-------' + */ + [0] = KEYMAP_ALL( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, + LCTL,LGUI,LALT,MHEN,HANJ, FN0, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT + ), + + /* 1: SpaceFN + * ,-----------------------------------------------------------. + * |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + * |-----------------------------------------------------------| + * |Caps | | |Esc| | | |Hom|Up |End|Psc|Slk|Pau|Ins | + * |-----------------------------------------------------------| + * | | | | | | |PgU|Lef|Dow|Rig| | | | + * |-----------------------------------------------------------| + * | | | | | |Spc|PgD|` |~ | |Men| | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [1] = KEYMAP_ALL( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS, + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + CAPS,TRNS,TRNS,ESC, TRNS,TRNS,TRNS,HOME,UP, END, PSCR,SLCK,PAUS, INS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,LEFT,DOWN,RGHT,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,SPC, PGDN,GRV, FN1, TRNS,APP, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS, TRNS,TRNS, TRNS,TRNS + ), +}; + +const action_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), + [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // tilde +}; + +#endif diff --git a/keyboards/converter/usb_usb/keymaps/default/Makefile b/keyboards/converter/usb_usb/keymaps/default/Makefile new file mode 100644 index 0000000000..f5c0545059 --- /dev/null +++ b/keyboards/converter/usb_usb/keymaps/default/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../../Makefile +endif diff --git a/keyboards/converter/usb_usb/keymaps/default/config.h b/keyboards/converter/usb_usb/keymaps/default/config.h new file mode 100644 index 0000000000..7fa3bf328e --- /dev/null +++ b/keyboards/converter/usb_usb/keymaps/default/config.h @@ -0,0 +1,6 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#endif diff --git a/keyboards/converter/usb_usb/keymaps/default/keymap.c b/keyboards/converter/usb_usb/keymaps/default/keymap.c new file mode 100644 index 0000000000..9817a607d3 --- /dev/null +++ b/keyboards/converter/usb_usb/keymaps/default/keymap.c @@ -0,0 +1,85 @@ +/* +Copyright 2017 Balz Guenat <balz.guenat@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "usb_usb.h" + +const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + /* 0: plain Qwerty without layer switching + * ,---------------. ,---------------. ,---------------. + * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| + * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | + * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| + * |-----------------------------------------------------------| |-----------| |---------------| |-------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| + * |-----------------------------------------------------------| `-----------' |---------------| |-------| + * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| + * |-----------------------------------------------------------| ,---. |---------------| |-------| + * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| + * |-----------------------------------------------------------| ,-----------. |---------------| |-------| + * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| + * `-----------------------------------------------------------' `-----------' `---------------' `-------' + */ + [0] = KEYMAP_ALL( + KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, KC_HELP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_STOP, KC_AGIN, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_MENU, KC_UNDO, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PCMM, KC_SLCT, KC_COPY, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PEQL, KC_EXEC, KC_PSTE, + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_HANJ, KC_SPC, KC_HAEN, KC_HENK, KC_KANA, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT, KC_FIND, KC_CUT + ), + [1] = KEYMAP_ALL( + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______, + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______,______, + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______,______, + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______,______, ______,______, + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______,______, ______,______, + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______, ______,______, ______,______ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch(id) { + default: + return MACRO_NONE; + } +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/converter/usb_usb/main.c b/keyboards/converter/usb_usb/main.c new file mode 100644 index 0000000000..76e88922cb --- /dev/null +++ b/keyboards/converter/usb_usb/main.c @@ -0,0 +1,102 @@ +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/power.h> +#include <util/delay.h> + +// LUFA +#include "lufa.h" + +#include "sendchar.h" +#include "debug.h" +#include "keyboard.h" +#include "led.h" + + +/* LED ping configuration */ +#define TMK_LED +//#define LEONARDO_LED +#if defined(TMK_LED) +// For TMK converter and Teensy +#define LED_TX_INIT (DDRD |= (1<<6)) +#define LED_TX_ON (PORTD |= (1<<6)) +#define LED_TX_OFF (PORTD &= ~(1<<6)) +#define LED_TX_TOGGLE (PORTD ^= (1<<6)) +#elif defined(LEONARDO_LED) +// For Leonardo(TX LED) +#define LED_TX_INIT (DDRD |= (1<<5)) +#define LED_TX_ON (PORTD &= ~(1<<5)) +#define LED_TX_OFF (PORTD |= (1<<5)) +#define LED_TX_TOGGLE (PORTD ^= (1<<5)) +#else +#define LED_TX_INIT +#define LED_TX_ON +#define LED_TX_OFF +#define LED_TX_TOGGLE +#endif + + +static void LUFA_setup(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ +#if (F_CPU == 8000000) + clock_prescale_set(clock_div_2); // 16MHz crystal divided by 2 +#else + clock_prescale_set(clock_div_1); +#endif + + // Leonardo needs. Without this USB device is not recognized. + USB_Disable(); + + USB_Init(); + + // for Console_Task + USB_Device_EnableSOFEvents(); + print_set_sendchar(sendchar); +} + + + +int main(void) +{ + // LED for debug + LED_TX_INIT; + LED_TX_ON; + + debug_enable = true; + debug_keyboard = true; + + host_set_driver(&lufa_driver); + keyboard_init(); + + LUFA_setup(); + + /* NOTE: Don't insert time consuming job here. + * It'll cause unclear initialization failure when DFU reset(worm start). + */ + sei(); + +/* Some keyboards bootup quickly and cannot be initialized with this startup wait. + // wait for startup of sendchar routine + while (USB_DeviceState != DEVICE_STATE_Configured) ; + if (debug_enable) { + _delay_ms(1000); + } +*/ + + debug("init: done\n"); + + for (;;) { + keyboard_task(); + +#if !defined(INTERRUPT_CONTROL_ENDPOINT) + // LUFA Task for control request + USB_USBTask(); +#endif + } + + return 0; +} diff --git a/keyboards/converter/usb_usb/matrix.c b/keyboards/converter/usb_usb/matrix.c new file mode 100644 index 0000000000..b077febd74 --- /dev/null +++ b/keyboards/converter/usb_usb/matrix.c @@ -0,0 +1 @@ +// Intentionally left empty. This file must exist for this board to build. diff --git a/keyboards/converter/usb_usb/rules.mk b/keyboards/converter/usb_usb/rules.mk new file mode 100644 index 0000000000..4ee6cdb1ce --- /dev/null +++ b/keyboards/converter/usb_usb/rules.mk @@ -0,0 +1,66 @@ +# MCU name +MCU ?= atmega32u4 + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU ?= 8000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH ?= AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB ?= $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +# BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA +# BACKLIGHT_ENABLE ?= yes + + +CUSTOM_MATRIX = yes +SRC = custom_matrix.cpp +include $(TMK_DIR)/protocol/usb_hid.mk diff --git a/keyboards/converter/usb_usb/usb_usb.c b/keyboards/converter/usb_usb/usb_usb.c new file mode 100644 index 0000000000..e7657938d2 --- /dev/null +++ b/keyboards/converter/usb_usb/usb_usb.c @@ -0,0 +1 @@ +#include "usb_usb.h"
\ No newline at end of file diff --git a/keyboards/converter/usb_usb/usb_usb.h b/keyboards/converter/usb_usb/usb_usb.h new file mode 100644 index 0000000000..c31fae1d0f --- /dev/null +++ b/keyboards/converter/usb_usb/usb_usb.h @@ -0,0 +1,203 @@ +/* +Copyright 2017 Balz Guenat <balz.guenat@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef USB_USB_H +#define USB_USB_H + +#include "quantum.h" + +#define ______ KC_TRNS + +/* ,---------------. ,---------------. ,---------------. + * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| + * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | + * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| + * |-----------------------------------------------------------| |-----------| |---------------| |-------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| + * |-----------------------------------------------------------| `-----------' |---------------| |-------| + * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| + * |-----------------------------------------------------------| ,---. |---------------| |-------| + * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| + * |-----------------------------------------------------------| ,-----------. |---------------| |-------| + * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| + * `-----------------------------------------------------------' `-----------' `---------------' `-------' + * + * + * App: Windows Menu key + * Gui: Windows key, Mac ⌘ key or Meta key + * + * Pwr: Power for Unix and Mac + * VDn,Vup,Mut: Volume control for Unix and Mac + * Stp,Agn..: for Unix + * + * KP,: Brazilian Keypad Comma + * KP=: Keypad = for Mac + * <,#: ISO keys(UK legend) + * JPY: Japanese Yen(¥) + * RO: Japanese ろ or Brazilian / + * MHEN: Japanese 無変換 Non Conversion + * HENK: Japanese 変換 Conversion + * KANA: Japanese かな Hiragana/Katakana + * https://en.wikipedia.org/wiki/Keyboard_layout#Japanese + * H/E: Korean 한/영 Hangul/English + * HNJ: Korean 한자 Hanja + * https://en.wikipedia.org/wiki/Keyboard_layout#Hangul_.28for_Korean.29 + * + * TODO: use same keycode to pass through instead of KC_NO? + */ +#define KEYMAP_ALL( \ + K68,K69,K6A,K6B,K6C,K6D,K6E,K6F,K70,K71,K72,K73, \ + K29, K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K45, K46,K47,K48, K81,K80,K7F,K66, K75, \ + K35,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K2D,K2E,K89,K2A, K49,K4A,K4B, K53,K54,K55,K56, K78,K79, \ + K2B,K14,K1A,K08,K15,K17,K1C,K18,K0C,K12,K13,K2F,K30, K31, K4C,K4D,K4E, K5F,K60,K61,K57, K76,K7A, \ + K39,K04,K16,K07,K09,K0A,K0B,K0D,K0E,K0F,K33,K34, K32,K28, K5C,K5D,K5E,K85, K77,K7C, \ + KE1,K64,K1D,K1B,K06,K19,K05,K11,K10,K36,K37,K38, K87,KE5, K52, K59,K5A,K5B,K67, K74,K7D, \ + KE0,KE3,KE2,K8B,K91, K2C, K90,K8A,K88,KE6,KE7,K65,KE4, K50,K51,K4F, K62, K63,K58, K7E,K7B \ +) { \ + { KC_NO, KC_NO, KC_NO, KC_NO, K04, K05, K06, K07, /* 00-07 */ \ + K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, /* 08-0F */ \ + { K10, K11, K12, K13, K14, K15, K16, K17, /* 10-17 */ \ + K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, /* 18-1F */ \ + { K20, K21, K22, K23, K24, K25, K26, K27, /* 20-27 */ \ + K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, /* 28-2F */ \ + { K30, K31, K32, K33, K34, K35, K36, K37, /* 30-37 */ \ + K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, /* 38-3F */ \ + { K40, K41, K42, K43, K44, K45, K46, K47, /* 40-47 */ \ + K48, K49, K4A, K4B, K4C, K4D, K4E, K4F }, /* 48-4F */ \ + { K50, K51, K52, K53, K54, K55, K56, K57, /* 50-57 */ \ + K58, K59, K5A, K5B, K5C, K5D, K5E, K5F }, /* 58-5F */ \ + { K60, K61, K62, K63, K64, K65, K66, K67, /* 60-67 */ \ + K68, K69, K6A, K6B, K6C, K6D, K6E, K6F }, /* 68-6F */ \ + { K70, K71, K72, K73, K74, K75, K76, K77, /* 70-77 */ \ + K78, K79, K7A, K7B, K7C, K7D, K7E, K7F }, /* 78-7F */ \ + { K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87, /* 80-87 */ \ + K88, K89, K8A, K8B, KC_NO, KC_NO, KC_NO, KC_NO }, /* 88-8F */ \ + { K90, K91, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* 90-97 */ \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* 98-9F */ \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* A0-A7 */ \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* A8-AF */ \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* B0-B7 */ \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* B8-BF */ \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* C0-C7 */ \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* C8-CF */ \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* D0-D7 */ \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* D8-DF */ \ + { KE0, KE1, KE2, KE3, KE4, KE5, KE6, KE7, /* E0-E7 */ \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* E8-EF */ \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* F0-F7 */ \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* F8-FF */ \ +} + +/* ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| + * |-----------------------------------------------------------| `-----------' |-----------| | + * |CapsL | A| S| D| F| G| H| J| K| L| ;| '| Return| | 4| 5| 6| +| + * |-----------------------------------------------------------| ,---. |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | + * |-----------------------------------------------------------| ,-----------. |-----------| | + * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .|Ent| + * `-----------------------------------------------------------' `-----------' `---------------' + */ +#define KEYMAP( \ + K29,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K45, K46,K47,K48, \ + K35,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K2D,K2E,K2A, K49,K4A,K4B, K53,K54,K55,K56, \ + K2B,K14,K1A,K08,K15,K17,K1C,K18,K0C,K12,K13,K2F,K30,K31, K4C,K4D,K4E, K5F,K60,K61, \ + K39,K04,K16,K07,K09,K0A,K0B,K0D,K0E,K0F,K33,K34, K28, K5C,K5D,K5E,K57, \ + KE1,K1D,K1B,K06,K19,K05,K11,K10,K36,K37,K38, KE5, K52, K59,K5A,K5B, \ + KE0,KE3,KE2, K2C, KE6,KE7,K65,KE4, K50,K51,K4F, K62, K63,K58 \ +) KEYMAP_ALL( \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + K29, K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K45, K46,K47,K48, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + K35,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K2D,K2E,KC_NO, K2A, K49,K4A,K4B, K53,K54,K55,K56, KC_NO, KC_NO, \ + K2B,K14,K1A,K08,K15,K17,K1C,K18,K0C,K12,K13,K2F,K30, K31, K4C,K4D,K4E, K5F,K60,K61,K57, KC_NO, KC_NO, \ + K39,K04,K16,K07,K09,K0A,K0B,K0D,K0E,K0F,K33,K34, KC_NO, K28, K5C,K5D,K5E,KC_NO, KC_NO, KC_NO, \ + KE1,KC_NO, K1D,K1B,K06,K19,K05,K11,K10,K36,K37,K38, KC_NO, KE5, K52, K59,K5A,K5B,KC_NO, KC_NO, KC_NO, \ + KE0,KE3,KE2,KC_NO, KC_NO, K2C, KC_NO, KC_NO, KC_NO, KE6,KE7,K65,KE4, K50,K51,K4F, K62, K63,K58, KC_NO, KC_NO \ +) + +/* ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Retn| |Del|End|PgD| | 7| 8| 9| +| + * |------------------------------------------------------` | `-----------' |-----------| | + * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| #| | | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3|Ent| + * |-----------------------------------------------------------| ,-----------. |-----------| | + * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .| | + * `-----------------------------------------------------------' `-----------' `---------------' + */ +#define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|Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| ^|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| @| [| Retn| |Del|End|PgD| | 7| 8| 9| +| + * |------------------------------------------------------` | `-----------' |-----------| | + * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| ]| | | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shft | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|Ent| + * |-----------------------------------------------------------| ,-----------. |-----------| | + * |Ctl|Gui|Alt|MHEN| Space |HENK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .| | + * `-----------------------------------------------------------' `-----------' `---------------' + */ +#define KEYMAP_JIS( \ + K29, K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K45, K46,K47,K48, \ + K35,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K2D,K2E,K89,K2A, K49,K4A,K4B, K53,K54,K55,K56, \ + K2B,K14,K1A,K08,K15,K17,K1C,K18,K0C,K12,K13,K2F,K30, K28, K4C,K4D,K4E, K5F,K60,K61,K57, \ + K39,K04,K16,K07,K09,K0A,K0B,K0D,K0E,K0F,K33,K34,K32, K5C,K5D,K5E, \ + KE1,K1D,K1B,K06,K19,K05,K11,K10,K36,K37,K38, K87,KE5, K52, K59,K5A,K5B,K58, \ + KE0,KE3,KE2,K8B, K2C, K8A,K88,KE6,KE7,K65,KE4, K50,K51,K4F, K62, K63 \ +) KEYMAP_ALL( \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + K29, K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K45, K46,K47,K48, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + K35,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K2D,K2E,K89,K2A, K49,K4A,K4B, K53,K54,K55,K56, KC_NO, KC_NO, \ + K2B,K14,K1A,K08,K15,K17,K1C,K18,K0C,K12,K13,K2F,K30, K32, K4C,K4D,K4E, K5F,K60,K61,K57, KC_NO, KC_NO, \ + K39,K04,K16,K07,K09,K0A,K0B,K0D,K0E,K0F,K33,K34, K32,K28, K5C,K5D,K5E,KC_NO, KC_NO, KC_NO, \ + KE1,KC_NO, K1D,K1B,K06,K19,K05,K11,K10,K36,K37,K38, K87,KE5, K52, K59,K5A,K5B,KC_NO, KC_NO, KC_NO, \ + KE0,KE3,KE2,K8B,KC_NO, K2C, KC_NO, K8A,K88,KE6,KE7,K65,KE4, K50,K51,K4F, K62, K63,K58, KC_NO, KC_NO \ +) +#endif diff --git a/keyboards/deltasplit75/Makefile b/keyboards/deltasplit75/Makefile new file mode 100644 index 0000000000..d1dec53302 --- /dev/null +++ b/keyboards/deltasplit75/Makefile @@ -0,0 +1,5 @@ +SUBPROJECT_DEFAULT = v2 + +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/deltasplit75/config.h b/keyboards/deltasplit75/config.h new file mode 100644 index 0000000000..89d328be64 --- /dev/null +++ b/keyboards/deltasplit75/config.h @@ -0,0 +1,29 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +#ifdef SUBPROJECT_protosplit + #include "protosplit/config.h" +#endif +#ifdef SUBPROJECT_v2 + #include "v2/config.h" +#endif +#endif diff --git a/keyboards/deltasplit75/deltasplit75.c b/keyboards/deltasplit75/deltasplit75.c new file mode 100644 index 0000000000..6a73db4cd6 --- /dev/null +++ b/keyboards/deltasplit75/deltasplit75.c @@ -0,0 +1 @@ +#include "deltasplit75.h"
\ No newline at end of file diff --git a/keyboards/deltasplit75/deltasplit75.h b/keyboards/deltasplit75/deltasplit75.h new file mode 100644 index 0000000000..9db16c78c2 --- /dev/null +++ b/keyboards/deltasplit75/deltasplit75.h @@ -0,0 +1,13 @@ +#ifndef DELTASPLIT75_H +#define DELTASPLIT75_H + +#ifdef SUBPROJECT_v2 + #include "v2.h" +#endif +#ifdef SUBPROJECT_protosplit + #include "protosplit.h" +#endif + +#include "quantum.h" + +#endif
\ No newline at end of file diff --git a/keyboards/deltasplit75/eeprom-lefthand.eep b/keyboards/deltasplit75/eeprom-lefthand.eep new file mode 100644 index 0000000000..b9666a74c0 --- /dev/null +++ b/keyboards/deltasplit75/eeprom-lefthand.eep @@ -0,0 +1,2 @@ +:0B0000000000000000000000000001F4
+:00000001FF
diff --git a/keyboards/deltasplit75/eeprom-righthand.eep b/keyboards/deltasplit75/eeprom-righthand.eep new file mode 100644 index 0000000000..94cc5be7fc --- /dev/null +++ b/keyboards/deltasplit75/eeprom-righthand.eep @@ -0,0 +1,2 @@ +:0B0000000000000000000000000000F5
+:00000001FF
diff --git a/keyboards/deltasplit75/i2c.c b/keyboards/deltasplit75/i2c.c new file mode 100644 index 0000000000..084c890c40 --- /dev/null +++ b/keyboards/deltasplit75/i2c.c @@ -0,0 +1,162 @@ +#include <util/twi.h> +#include <avr/io.h> +#include <stdlib.h> +#include <avr/interrupt.h> +#include <util/twi.h> +#include <stdbool.h> +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) + lim++; + + // easier way, but will wait slightly longer + // _delay_us(100); +} + +// Setup twi to run at 100kHz +void i2c_master_init(void) { + // no prescaler + TWSR = 0; + // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); + + i2c_delay(); + + // check that we started successfully + if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) + return 1; + + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) + return 1; // slave did not acknowledge + else + return 0; // success +} + + +// Finish the i2c transaction. +void i2c_master_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + uint16_t lim = 0; + while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) + lim++; +} + +// Write one byte to the i2c slave. +// returns 0 => slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + // check if the slave acknowledged us + return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; +} + +// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, +// if ack=0 the acknowledge bit is not set. +// returns: byte read from i2c device +uint8_t i2c_master_read(int ack) { + TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); + + i2c_delay(); + return TWDR; +} + +void i2c_reset_state(void) { + TWCR = 0; +} + +void i2c_slave_init(uint8_t address) { + TWAR = address << 0; // slave i2c address + // TWEN - twi enable + // TWEA - enable address acknowledgement + // TWINT - twi interrupt flag + // TWIE - enable the twi interrupt + TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); +} + +ISR(TWI_vect); + +ISR(TWI_vect) { + uint8_t ack = 1; + switch(TW_STATUS) { + case TW_SR_SLA_ACK: + // this device has been addressed as a slave receiver + slave_has_register_set = false; + break; + + case TW_SR_DATA_ACK: + // this device has received data as a slave receiver + // The first byte that we receive in this transaction sets the location + // of the read/write location of the slaves memory that it exposes over + // i2c. After that, bytes will be written at slave_buffer_pos, incrementing + // slave_buffer_pos after each write. + if(!slave_has_register_set) { + slave_buffer_pos = TWDR; + // don't acknowledge the master if this memory loctaion is out of bounds + if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); +} +#endif diff --git a/keyboards/deltasplit75/i2c.h b/keyboards/deltasplit75/i2c.h new file mode 100644 index 0000000000..08ce4b0093 --- /dev/null +++ b/keyboards/deltasplit75/i2c.h @@ -0,0 +1,31 @@ +#ifndef I2C_H +#define I2C_H + +#include <stdint.h> + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 100000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + +#endif diff --git a/keyboards/deltasplit75/keymaps/default/config.h b/keyboards/deltasplit75/keymaps/default/config.h new file mode 100644 index 0000000000..4fb2554e0d --- /dev/null +++ b/keyboards/deltasplit75/keymaps/default/config.h @@ -0,0 +1,31 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS + + +#ifdef SUBPROJECT_v2 + #include "../../v2/config.h" +#endif +#ifdef SUBPROJECT_protosplit + #include "../../protosplit/config.h" +#endif diff --git a/keyboards/deltasplit75/keymaps/default/keymap.c b/keyboards/deltasplit75/keymaps/default/keymap.c new file mode 100644 index 0000000000..e2657bfa2a --- /dev/null +++ b/keyboards/deltasplit75/keymaps/default/keymap.c @@ -0,0 +1,31 @@ +#include "deltasplit75.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +// Fillers to make layering more clear + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + KEYMAP_V2( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_END, KC_PGDN, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_SLCK, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_TRNS, KC_ENT, KC_PAUS, //modify KC_TRNS to enable ISO Support + KC_LSFT, KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PSCR, //modify KC_TRNS to enable ISO Support + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + KEYMAP_V2( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, + KC_BSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_VOLU, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + M(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_VOLD, M(0), KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +};
\ No newline at end of file diff --git a/keyboards/deltasplit75/keymaps/itsaferbie/Makefile b/keyboards/deltasplit75/keymaps/itsaferbie/Makefile new file mode 100644 index 0000000000..bab3b4c564 --- /dev/null +++ b/keyboards/deltasplit75/keymaps/itsaferbie/Makefile @@ -0,0 +1,7 @@ +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +AUDIO_ENABLE = no # Audio disabled while using RGB underlight. +EXTRAKEY_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/deltasplit75/keymaps/itsaferbie/config.h b/keyboards/deltasplit75/keymaps/itsaferbie/config.h new file mode 100644 index 0000000000..4fb2554e0d --- /dev/null +++ b/keyboards/deltasplit75/keymaps/itsaferbie/config.h @@ -0,0 +1,31 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS + + +#ifdef SUBPROJECT_v2 + #include "../../v2/config.h" +#endif +#ifdef SUBPROJECT_protosplit + #include "../../protosplit/config.h" +#endif diff --git a/keyboards/deltasplit75/keymaps/itsaferbie/keymap.c b/keyboards/deltasplit75/keymaps/itsaferbie/keymap.c new file mode 100644 index 0000000000..82c292f499 --- /dev/null +++ b/keyboards/deltasplit75/keymaps/itsaferbie/keymap.c @@ -0,0 +1,46 @@ +#include "deltasplit75.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +// Fillers to make layering more clear + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default Layer + *,-----------------------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|Prnt|Ins|Del| + * |----------------------------------------------------------------------| + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backspace| Home| + * |----------------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| PgUp| + * |----------------------------------------------------------------------| + * |Ctrl| A| S| D| F| G| H| J| K| L| ;| '|Enter | PgDown| + * |----------------------------------------------------------------------| + * |Shif| | Z| X| C| V| B| N| M| ,| .| /|Shift | Up| End| + * |----------------------------------------------------------------------| + * |CapsLo|Gui |Alt |Sp |Mod | Sp| Alt| Gui| Ctrl| | Lef| Dow| Rig| + * `----------------------------------------------------------------------' + */ + KEYMAP_V2( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TRNS, KC_HOME, // KC_TRNS is the unneeded key in the split backspace. + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_TRNS, KC_ENT, KC_PGDN, // KC_TRNS is unneeded ISO enter key. + KC_LSFT, KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, // KC_TRNS is uneeded ISO layout key. + KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + KEYMAP_V2( + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_STOP, KC_MNXT), + +};
\ No newline at end of file diff --git a/keyboards/deltasplit75/keymaps/protosplit/config.h b/keyboards/deltasplit75/keymaps/protosplit/config.h new file mode 100644 index 0000000000..4fb2554e0d --- /dev/null +++ b/keyboards/deltasplit75/keymaps/protosplit/config.h @@ -0,0 +1,31 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS + + +#ifdef SUBPROJECT_v2 + #include "../../v2/config.h" +#endif +#ifdef SUBPROJECT_protosplit + #include "../../protosplit/config.h" +#endif diff --git a/keyboards/deltasplit75/keymaps/protosplit/keymap.c b/keyboards/deltasplit75/keymaps/protosplit/keymap.c new file mode 100644 index 0000000000..d8db2b88e1 --- /dev/null +++ b/keyboards/deltasplit75/keymaps/protosplit/keymap.c @@ -0,0 +1,32 @@ +#include "deltasplit75.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +// Fillers to make layering more clear + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + KEYMAP_PROTOSPLIT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_END, KC_PGDN, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_SLCK, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PAUS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PSCR, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + KEYMAP_PROTOSPLIT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, + KC_BSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_VOLU, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + M(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_VOLD, M(0), KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + +};
\ No newline at end of file diff --git a/keyboards/deltasplit75/matrix.c b/keyboards/deltasplit75/matrix.c new file mode 100644 index 0000000000..1389690042 --- /dev/null +++ b/keyboards/deltasplit75/matrix.c @@ -0,0 +1,318 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "serial.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + if (serial_update_buffers()) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + int ret = _matrix_scan(); + + + +#ifdef USE_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction() ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + + matrix_scan_quantum(); + + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); + +#ifdef USE_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +static void init_cols(void) +{ + for(int x = 0; x < MATRIX_COLS; x++) { + _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/deltasplit75/readme.md b/keyboards/deltasplit75/readme.md new file mode 100644 index 0000000000..04ed35c29e --- /dev/null +++ b/keyboards/deltasplit75/readme.md @@ -0,0 +1,137 @@ +DeltaSplit75 +====== + +This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ and https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split + +Credit to ahtn and wootpatoot for work on the split keyboard firmware + +Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 +based boards. + +## Case Files +Files are available here: https://github.com/xyxjj/DeltaSplit75-Case-files + +## Build Guide +The build guide should be found at https://qmk.fm/deltasplit75 + + +## First Time Setup + +Download or clone the whole firmware and navigate to the keyboards/deltasplit75 directory. Once your dev env is setup, you'll be able to generate the .hex using: + +``` +make v2 + +or + +make v2-YOUR_KEYMAP_NAME (if you make a folder for your keymap) + +or + +make protosplit (if you have one of the prototype PCBs) +``` + +You will see a lot of output and if everything worked correctly you will see the built hex files: + +``` +deltasplit75_v2_protosplit.hex + +or + +deltasplit74_v2_YOUR_KEYMAP_NAME.hex + +or + +deltasplit75_v2_default.hex + +``` + + +For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. + +### DeltaSplit75 V2 +The PCBs available in groupbuy are all v2, if you've bought one of my prototype PCBs (it says DeltaSplit65 on the silkscreen instead of 75), use the code make protosplit instead + +Features +-------- + +For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). + +Some features supported by the firmware: + +* Either half can connect to the computer via USB, or both halves can be used + independently. +* 75% formfactor +* Support for multiple Bottom Rows +* RGB underglow support +* Split Backspace and ISO support + + +Flashing +------- +I personally use xLoader to upload my hex files to the keyboard, though any other working software is fine too + + +Choosing which board to plug the USB cable into (choosing Master) +-------- +Because the two boards are identical, the firmware has logic to differentiate the left and right board. + +It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. + +The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side. + +The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. + +### Setting the left hand as master +If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. + +### Setting the right hand as master +If you always plug the usb cable into the right board, add an extra flag to your `config.h` +``` + #define MASTER_RIGHT +``` + +### Setting EE_hands to use either hands as master +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. + +The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep +// or the equivalent in dfu-programmer + +``` +and similarly for right half +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep +// or the equivalent in dfu-programmer +``` + +NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) + +After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. + +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout using bootmagic's default layout option. +Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. + + +Notes on Using Pro Micro 3.3V +----------------------------- + +Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects +the frequency on the 3.3V board. + +Also, if the slave board is producing weird characters in certain columns, +update the following line in `matrix.c` to the following: + +``` +// _delay_us(30); // without this wait read unstable value. +_delay_us(300); // without this wait read unstable value. +``` diff --git a/keyboards/deltasplit75/rules.mk b/keyboards/deltasplit75/rules.mk new file mode 100644 index 0000000000..1aee5313c1 --- /dev/null +++ b/keyboards/deltasplit75/rules.mk @@ -0,0 +1,75 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SUBPROJECT_rev1 ?= yes +USE_I2C ?= yes +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes diff --git a/keyboards/deltasplit75/serial.c b/keyboards/deltasplit75/serial.c new file mode 100644 index 0000000000..6faed09ce0 --- /dev/null +++ b/keyboards/deltasplit75/serial.c @@ -0,0 +1,228 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include <avr/io.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <stdbool.h> +#include "serial.h" + +#ifdef USE_SERIAL + +// Serial pulse period in microseconds. Its probably a bad idea to lower this +// value. +#define SERIAL_DELAY 24 + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + +#define SLAVE_DATA_CORRUPT (1<<0) +volatile uint8_t status = 0; + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static +void serial_input(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void serial_master_init(void) { + serial_output(); + serial_high(); +} + +void serial_slave_init(void) { + serial_input(); + + // Enable INT0 + EIMSK |= _BV(INT0); + // Trigger on falling edge of INT0 + EICRA &= ~(_BV(ISC00) | _BV(ISC01)); +} + +// Used by the master to synchronize timing with the slave. +static +void sync_recv(void) { + serial_input(); + // This shouldn't hang if the slave disconnects because the + // serial line will float to high if the slave does disconnect. + while (!serial_read_pin()); + serial_delay(); +} + +// Used by the slave to send a synchronization signal to the master. +static +void sync_send(void) { + serial_output(); + + serial_low(); + serial_delay(); + + serial_high(); +} + +// Reads a byte from the serial line +static +uint8_t serial_read_byte(void) { + uint8_t byte = 0; + serial_input(); + for ( uint8_t i = 0; i < 8; ++i) { + byte = (byte << 1) | serial_read_pin(); + serial_delay(); + _delay_us(1); + } + + return byte; +} + +// Sends a byte with MSB ordering +static +void serial_write_byte(uint8_t data) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(data & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +// interrupt handle to be used by the slave device +ISR(SERIAL_PIN_INTERRUPT) { + sync_send(); + + uint8_t checksum = 0; + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_slave_buffer[i]); + sync_send(); + checksum += serial_slave_buffer[i]; + } + serial_write_byte(checksum); + sync_send(); + + // wait for the sync to finish sending + serial_delay(); + + // read the middle of pulses + _delay_us(SERIAL_DELAY/2); + + uint8_t checksum_computed = 0; + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_master_buffer[i] = serial_read_byte(); + sync_send(); + checksum_computed += serial_master_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_send(); + + serial_input(); // end transaction + + if ( checksum_computed != checksum_received ) { + status |= SLAVE_DATA_CORRUPT; + } else { + status &= ~SLAVE_DATA_CORRUPT; + } +} + +inline +bool serial_slave_DATA_CORRUPT(void) { + return status & SLAVE_DATA_CORRUPT; +} + +// Copies the serial_slave_buffer to the master and sends the +// serial_master_buffer to the slave. +// +// Returns: +// 0 => no error +// 1 => slave did not respond +int serial_update_buffers(void) { + // this code is very time dependent, so we need to disable interrupts + cli(); + + // signal to the slave that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(1); + + // wait for the slaves response + serial_input(); + serial_high(); + _delay_us(SERIAL_DELAY); + + // check if the slave is present + if (serial_read_pin()) { + // slave failed to pull the line low, assume not present + sei(); + return 1; + } + + // if the slave is present syncronize with it + sync_recv(); + + uint8_t checksum_computed = 0; + // receive data from the slave + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_slave_buffer[i] = serial_read_byte(); + sync_recv(); + checksum_computed += serial_slave_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_recv(); + + if (checksum_computed != checksum_received) { + sei(); + return 1; + } + + uint8_t checksum = 0; + // send data to the slave + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_master_buffer[i]); + sync_recv(); + checksum += serial_master_buffer[i]; + } + serial_write_byte(checksum); + sync_recv(); + + // always, release the line when not in use + serial_output(); + serial_high(); + + sei(); + return 0; +} + +#endif diff --git a/keyboards/deltasplit75/serial.h b/keyboards/deltasplit75/serial.h new file mode 100644 index 0000000000..6ef52019a8 --- /dev/null +++ b/keyboards/deltasplit75/serial.h @@ -0,0 +1,26 @@ +#ifndef MY_SERIAL_H +#define MY_SERIAL_H + +#include "config.h" +#include <stdbool.h> + +/* TODO: some defines for interrupt setup */ +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_INPUT PIND +#define SERIAL_PIN_MASK _BV(PD0) +#define SERIAL_PIN_INTERRUPT INT0_vect + +#define SERIAL_SLAVE_BUFFER_LENGTH ((MATRIX_COLS+7)/8 *MATRIX_ROWS/2) +#define SERIAL_MASTER_BUFFER_LENGTH 1 + +// Buffers for master - slave communication +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); +bool serial_slave_data_corrupt(void); + +#endif diff --git a/keyboards/deltasplit75/split_util.c b/keyboards/deltasplit75/split_util.c new file mode 100644 index 0000000000..226dc18816 --- /dev/null +++ b/keyboards/deltasplit75/split_util.c @@ -0,0 +1,81 @@ +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/power.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <avr/eeprom.h> +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else +# include "serial.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated use MASTER_RIGHT instead since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { +#ifdef USE_I2C + i2c_master_init(); +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { +#ifdef USE_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1<<VBUS)); //checks state of VBUS +} + +void split_keyboard_setup(void) { + setup_handedness(); + + if (has_usb()) { + keyboard_master_setup(); + } else { + keyboard_slave_setup(); + } + sei(); +} + +void keyboard_slave_loop(void) { + matrix_init(); + + while (1) { + matrix_slave_scan(); + } +} + +// this code runs before the usb and keyboard is initialized +void matrix_setup(void) { + split_keyboard_setup(); + + if (!has_usb()) { + keyboard_slave_loop(); + } +} diff --git a/keyboards/deltasplit75/split_util.h b/keyboards/deltasplit75/split_util.h new file mode 100644 index 0000000000..6b896679ca --- /dev/null +++ b/keyboards/deltasplit75/split_util.h @@ -0,0 +1,22 @@ +#ifndef SPLIT_KEYBOARD_UTIL_H +#define SPLIT_KEYBOARD_UTIL_H + +#include <stdbool.h> + +#ifdef EE_HANDS + #define EECONFIG_BOOTMAGIC_END (uint8_t *)10 + #define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END +#endif + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); +void keyboard_slave_loop(void); + +#endif diff --git a/keyboards/deltasplit75/v2/Makefile b/keyboards/deltasplit75/v2/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/deltasplit75/v2/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/deltasplit75/v2/config.h b/keyboards/deltasplit75/v2/config.h new file mode 100644 index 0000000000..0f4b806e2d --- /dev/null +++ b/keyboards/deltasplit75/v2/config.h @@ -0,0 +1,90 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER xyxjj +#define PRODUCT DeltaSplit75 +#define DESCRIPTION 75% split keyboard + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 14 +#define MATRIX_COLS 8 + +// wiring of each half +#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 } +#define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1} + +#define CATERINA_BOOTLOADER + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#endif
\ No newline at end of file diff --git a/keyboards/deltasplit75/v2/rules.mk b/keyboards/deltasplit75/v2/rules.mk new file mode 100644 index 0000000000..80a942d06f --- /dev/null +++ b/keyboards/deltasplit75/v2/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/deltasplit75/v2/v2.c b/keyboards/deltasplit75/v2/v2.c new file mode 100644 index 0000000000..a7ee1fa8a5 --- /dev/null +++ b/keyboards/deltasplit75/v2/v2.c @@ -0,0 +1,14 @@ +#include "deltasplit75.h" + +void matrix_init_kb(void) { + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + diff --git a/keyboards/deltasplit75/v2/v2.h b/keyboards/deltasplit75/v2/v2.h new file mode 100644 index 0000000000..985a8b267f --- /dev/null +++ b/keyboards/deltasplit75/v2/v2.h @@ -0,0 +1,62 @@ +#ifndef V2_H +#define V2_H + +#include "deltasplit75.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +//void promicro_bootloader_jmp(bool program); +//matrix is defined in a weird way here; the layout on both sides are asymmetrical, but the "matrix" is symmetrical but with empty gaps +//the last column is defined as a separate row because the firmware currently doesnt support more than 8 columns (this layout has 9 columns per side) K45 and K110 are the Bs on both sides; K53 and K106 are extra keys for ISO +#define KEYMAP_V2( \ + K00, K01, K02, K03, K04, K05, K06, K70, K71, K72, K73, K74, K75, K76, K77, K132, \ + K10, K11, K12, K13, K14, K15, K16, K80, K81, K82, K83, K84, K85, K86, K87, K133, \ + K20, K21, K22, K23, K24, K25, K90, K91, K92, K93, K94, K95, K96, K97, K134, \ + K30, K31, K32, K33, K34, K35, K100, K101, K102, K103, K104, K105, K106, K107, K135, \ + K40, K53, K41, K42, K43, K44, K45, K110, K111, K112, K113, K114, K115, K116, K117, K136, \ + K50, K51, K52, K54, K55, K120, K121, K122, K123, K126, K127, K137 \ + ) \ + { \ + { K00, K01, K02, K03, K04, K05, K06, KC_NO}, \ + { K10, K11, K12, K13, K14, K15, K16, KC_NO}, \ + { K20, K21, K22, K23, K24, K25, KC_NO, KC_NO}, \ + { K30, K31, K32, K33, K34, K35, KC_NO, KC_NO}, \ + { K40, K41, K42, K43, K44, K45, KC_NO, KC_NO}, \ + { K50, K51, K52, K53, K54, K55, KC_NO, KC_NO}, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, \ + { K70 , K71, K72, K73, K74, K75, K76, K77}, \ + { K80, K81, K82, K83, K84, K85, K86, K87}, \ + { K90, K91, K92, K93, K94, K95, K96, K97}, \ + { K100, K101, K102, K103, K104, K105, K106, K107}, \ + { K110, K111, K112, K113, K114, K115, K116, K117}, \ + { K120, K121, K122, K123, KC_NO, KC_NO, K126, K127}, \ + { KC_NO, KC_NO, K132, K133, K134, K135, K136, K137} \ + } + +#define KEYMAP_PROTOSPLIT( \ + K00, K01, K02, K03, K04, K05, K06, K70, K71, K72, K73, K74, K75, K76, K77, K132, \ + K10, K11, K12, K13, K14, K15, K16, K80, K81, K82, K83, K84, K85, K86, K87, K133, \ + K20, K21, K22, K23, K24, K25, K90, K91, K92, K93, K94, K95, K96, K97, K134, \ + K30, K31, K32, K33, K34, K35, K100, K101, K102, K103, K104, K105, K107, K135, \ + K40, K41, K42, K43, K44, K45, K110, K111, K112, K113, K114, K115, K116, K117, K136, \ + K50, K51, K52, K54, K55, K120, K121, K122, K123, K126, K127, K137 \ + ) \ + { \ + { K00, K01, K02, K03, K04, K05, K06, KC_NO}, \ + { K10, K11, K12, K13, K14, K15, K16, KC_NO}, \ + { K20, K21, K22, K23, K24, K25, KC_NO, KC_NO}, \ + { K30, K31, K32, K33, K34, K35, KC_NO, KC_NO}, \ + { K40, K41, K42, K43, K44, K45, KC_NO, KC_NO}, \ + { K50, K51, K52, KC_NO, K54, K55, KC_NO, KC_NO}, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, \ + { K70 , K71, K72, K73, K74, K75, K76, K77}, \ + { K80, K81, K82, K83, K84, K85, K86, K87}, \ + { K90, K91, K92, K93, K94, K95, K96, K97}, \ + { K100, K101, K102, K103, K104, K105, KC_NO, K107}, \ + { K110, K111, K112, K113, K114, K115, K116, K117}, \ + { K120, K121, K122, K123, KC_NO, KC_NO, K126, K127}, \ + { KC_NO, KC_NO, K132, K133, K134, K135, K136, K137} \ + } + +#endif
\ No newline at end of file diff --git a/keyboards/dk60/config.h b/keyboards/dk60/config.h index 9c5232ef06..5b712fe9bd 100644 --- a/keyboards/dk60/config.h +++ b/keyboards/dk60/config.h @@ -23,7 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 - #define DEVICE_VER 0x0003 + #define DEVICE_VER 0x0001 #define MANUFACTURER DARKOU #define PRODUCT DK60 #define DESCRIPTION QMK keyboard firmware for DK60 support diff --git a/keyboards/dk60/readme.md b/keyboards/dk60/readme.md index 544b5b0d11..5eba791504 100644 --- a/keyboards/dk60/readme.md +++ b/keyboards/dk60/readme.md @@ -1,8 +1,17 @@ -DK60 keyboard firmware -====================== +DK60 +=== -Another 60% keyboard with different HHKB layout +![DK60](https://github.com/Dbroqua/DK60/raw/master/Previews/DK60.png) -More information here: https://github.com/Dbroqua/DK60 +Another 60% keyboard with different HHKB layout made and sold by dbroqua. [More info on github/dbroqua](https://github.com/Dbroqua/DK60/) + +* Keyboard Maintainer: [Damien Broqua aka DarKou](https://github.com/Dbroqua) +* Hardware Supported: DK60 PCB revA + +Make example for this keyboard (after setting up your build environment): + + make dk60-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. Open Hardware project! diff --git a/keyboards/eco/Makefile b/keyboards/eco/Makefile new file mode 100644 index 0000000000..b9bada8f8d --- /dev/null +++ b/keyboards/eco/Makefile @@ -0,0 +1,5 @@ +SUBPROJECT_DEFAULT = rev2 + +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h new file mode 100644 index 0000000000..99b057496f --- /dev/null +++ b/keyboards/eco/config.h @@ -0,0 +1,80 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x1337 +#define PRODUCT_ID 0x6006 +#define MANUFACTURER Bishop Keyboards +#define PRODUCT The ECO Keyboard +#define DESCRIPTION An economical ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 14 + +#define CATERINA_BOOTLOADER + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#ifdef SUBPROJECT_rev1 + #include "rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "rev2/config.h" +#endif + +#endif diff --git a/keyboards/eco/eco.c b/keyboards/eco/eco.c new file mode 100644 index 0000000000..84097652d8 --- /dev/null +++ b/keyboards/eco/eco.c @@ -0,0 +1 @@ +#include "eco.h" diff --git a/keyboards/eco/eco.h b/keyboards/eco/eco.h new file mode 100644 index 0000000000..2cfb8df26b --- /dev/null +++ b/keyboards/eco/eco.h @@ -0,0 +1,14 @@ +#ifndef ECO_H +#define ECO_H + +#ifdef SUBPROJECT_rev1 + #include "rev1.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "rev2.h" +#endif + + +#include "quantum.h" + +#endif
\ No newline at end of file diff --git a/keyboards/eco/keymaps/that_canadian/Makefile b/keyboards/eco/keymaps/that_canadian/Makefile new file mode 100644 index 0000000000..7dab979426 --- /dev/null +++ b/keyboards/eco/keymaps/that_canadian/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/eco/keymaps/that_canadian/keymap.c b/keyboards/eco/keymaps/that_canadian/keymap.c new file mode 100644 index 0000000000..87f859e8e0 --- /dev/null +++ b/keyboards/eco/keymaps/that_canadian/keymap.c @@ -0,0 +1,217 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +// Below layout is based upon /u/That-Canadian's planck layout + +#include "eco.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 2 +#define _RAISE 3 + +#define _FUNCTION 15 +#define _ADJUST 16 + +enum eco_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-------------------------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | ( | ) | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Func | A | S | D | F | G | [ | ] | H | J | K | L | ; | Enter| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | { | } | N | M | , | . | / | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | ` | GUI | Alt |Lower | Space|Pg-dwn| Pg-up| Space|Raise | Left | Down | Up |Right | + * `-------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LPRN, KC_RPRN, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {MO(_FUNCTION), KC_A, KC_S, KC_D, KC_F, KC_G, KC_LBRC, KC_RBRC, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, + {OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT}, + {KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_PGDN, KC_PGUP, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-------------------------------------------------------------------------------------------------. + * | Esc | ! | @ | # | $ | % | | | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | | F6 | _ | + | { | } |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | F12 | | | Mute | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | |Lower | | | | Bksp |Raise | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, KC_F12, _______, _______, KC_MUTE, _______, KC_PIPE}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-------------------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | 4 | 5 | 6 | + | | | | | - | = | [ | ] |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Enter | 7 | 8 | 9 | - | | | | | | | Mute | | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | , | 0 | . |Lower | Bksp | | | |Raise | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {_______, KC_4, KC_5, KC_6, KC_PLUS, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______}, + {KC_ENT, KC_7, KC_8, KC_9, KC_MINS, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_BSLS}, + {_______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Adjust (Lower + Raise) + * ,-------------------------------------------------------------------------------------------------. + * |Taskmg| Reset| | | | | | | | | | | |caltde| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {TSKMGR, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CALTDEL}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* Function + * ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | Up | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | Left | Down |Right | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Caps | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ +[_FUNCTION] = { + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______}, + {KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/eco/keymaps/that_canadian/readme.md b/keyboards/eco/keymaps/that_canadian/readme.md new file mode 100644 index 0000000000..aa3316af03 --- /dev/null +++ b/keyboards/eco/keymaps/that_canadian/readme.md @@ -0,0 +1 @@ +# ECO Layout by u/That-Canadian
\ No newline at end of file diff --git a/keyboards/eco/readme.md b/keyboards/eco/readme.md new file mode 100644 index 0000000000..d29aa8ece7 --- /dev/null +++ b/keyboards/eco/readme.md @@ -0,0 +1,15 @@ +ECO +=== + +![ECO](http://i.imgur.com/YligKxr.jpg) + +An economical 4x14 ortholinear keyboard + +Keyboard Maintainer: BishopKeyboards and That-Canadian +Hardware Supported: ECO PCB rev1 Pro Micro + +Make example for this keyboard (after setting up your build environment): + + make eco-rev2-that_canadian + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file diff --git a/keyboards/eco/rev1/Makefile b/keyboards/eco/rev1/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/eco/rev1/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/eco/rev1/config.h b/keyboards/eco/rev1/config.h new file mode 100644 index 0000000000..1e97a703d1 --- /dev/null +++ b/keyboards/eco/rev1/config.h @@ -0,0 +1,30 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + +#include "../config.h" + +#define DEVICE_VER 0x0001 + +/* ECO V1 pin-out */ +#define MATRIX_ROW_PINS { B1, B6, B2, B3 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 } +#define UNUSED_PINS + +#endif diff --git a/keyboards/eco/rev1/rev1.c b/keyboards/eco/rev1/rev1.c new file mode 100644 index 0000000000..84097652d8 --- /dev/null +++ b/keyboards/eco/rev1/rev1.c @@ -0,0 +1 @@ +#include "eco.h" diff --git a/keyboards/eco/rev1/rev1.h b/keyboards/eco/rev1/rev1.h new file mode 100644 index 0000000000..41541ac05b --- /dev/null +++ b/keyboards/eco/rev1/rev1.h @@ -0,0 +1,24 @@ +#ifndef REV1_H +#define REV1_H + +#include "../eco.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +//void promicro_bootloader_jmp(bool program); + +#define KEYMAP( \ + k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014, \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 \ + ) \ + { \ + { k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014 }, \ + { k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114 }, \ + { k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214 }, \ + { k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 } \ + } + +#endif
\ No newline at end of file diff --git a/keyboards/eco/rev1/rules.mk b/keyboards/eco/rev1/rules.mk new file mode 100644 index 0000000000..a0825b4ef6 --- /dev/null +++ b/keyboards/eco/rev1/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/eco/rev2/Makefile b/keyboards/eco/rev2/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/eco/rev2/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/eco/rev2/config.h b/keyboards/eco/rev2/config.h new file mode 100644 index 0000000000..83f2defc9e --- /dev/null +++ b/keyboards/eco/rev2/config.h @@ -0,0 +1,30 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV2_CONFIG_H +#define REV2_CONFIG_H + +#include "../config.h" + +#define DEVICE_VER 0x0002 + +/* ECO V2.1 pin-out */ +#define MATRIX_ROW_PINS { D7, B5, B4, E6 } +#define MATRIX_COL_PINS { D1, D0, D4, C6, B6, B2, B3, B1, F7, F6, F5, F4, D2, D3 } +#define UNUSED_PINS + +#endif diff --git a/keyboards/eco/rev2/rev2.c b/keyboards/eco/rev2/rev2.c new file mode 100644 index 0000000000..84097652d8 --- /dev/null +++ b/keyboards/eco/rev2/rev2.c @@ -0,0 +1 @@ +#include "eco.h" diff --git a/keyboards/eco/rev2/rev2.h b/keyboards/eco/rev2/rev2.h new file mode 100644 index 0000000000..5b377f2908 --- /dev/null +++ b/keyboards/eco/rev2/rev2.h @@ -0,0 +1,24 @@ +#ifndef REV2_H +#define REV2_H + +#include "../eco.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +//void promicro_bootloader_jmp(bool program); + +#define KEYMAP( \ + k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014, \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 \ + ) \ + { \ + { k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014 }, \ + { k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114 }, \ + { k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214 }, \ + { k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 } \ + } + +#endif
\ No newline at end of file diff --git a/keyboards/eco/rev2/rules.mk b/keyboards/eco/rev2/rules.mk new file mode 100644 index 0000000000..a0825b4ef6 --- /dev/null +++ b/keyboards/eco/rev2/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/eco/rules.mk b/keyboards/eco/rules.mk new file mode 100644 index 0000000000..cf26cdc0db --- /dev/null +++ b/keyboards/eco/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = yes # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +API_SYSEX_ENABLE = no + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/ergodox/config.h b/keyboards/ergodox/config.h index 2091999bb3..0e461e59dc 100644 --- a/keyboards/ergodox/config.h +++ b/keyboards/ergodox/config.h @@ -32,6 +32,9 @@ #ifdef SUBPROJECT_infinity #include "infinity/config.h" #endif +#ifdef SUBPROJECT_ergodone + #include "ergodone/config.h" +#endif #endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */ diff --git a/keyboards/ergodox/ergodone/Makefile b/keyboards/ergodox/ergodone/Makefile new file mode 100644 index 0000000000..bd09e5885d --- /dev/null +++ b/keyboards/ergodox/ergodone/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif diff --git a/keyboards/ergodox/ergodone/config.h b/keyboards/ergodox/ergodone/config.h new file mode 100644 index 0000000000..52ae2d576c --- /dev/null +++ b/keyboards/ergodox/ergodone/config.h @@ -0,0 +1,55 @@ +#ifndef ERGODOX_ERGODONE_CONFIG_H +#define ERGODOX_ERGODONE_CONFIG_H + +#include "../config.h" + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1307 +#define DEVICE_VER 0x0001 +#define MANUFACTURER ErgoDone +#define PRODUCT ErgoDone +#define DESCRIPTION QMK keyboard firmware for ErgoDone + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 14 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +#define LED_BRIGHTNESS_LO 15 +#define LED_BRIGHTNESS_HI 255 + +/* fix space cadet rollover issue */ +#define DISABLE_SPACE_CADET_ROLLOVER + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +#define PREVENT_STUCK_MODIFIERS + +#define USB_MAX_POWER_CONSUMPTION 500 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION +//#define DEBUG_MATRIX_SCAN_RATE + +#endif diff --git a/keyboards/ergodox/ergodone/ergodone.c b/keyboards/ergodox/ergodone/ergodone.c new file mode 100644 index 0000000000..6b8d8a0632 --- /dev/null +++ b/keyboards/ergodox/ergodone/ergodone.c @@ -0,0 +1,5 @@ +#include "ergodone.h" + +void matrix_init_kb(void) { + matrix_init_user(); +} diff --git a/keyboards/ergodox/ergodone/ergodone.h b/keyboards/ergodox/ergodone/ergodone.h new file mode 100644 index 0000000000..cddc1fbe7a --- /dev/null +++ b/keyboards/ergodox/ergodone/ergodone.h @@ -0,0 +1,63 @@ +#ifndef ERGODOX_ERGODONE_H +#define ERGODOX_ERGODONE_H + +#include "quantum.h" +#include <stdint.h> +#include <stdbool.h> + +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) +#define CPU_16MHz 0x00 + +void init_ergodox(void); + +inline void ergodox_right_led_1_off(void) {} +inline void ergodox_right_led_1_on(void) {} +inline void ergodox_right_led_2_off(void) {} +inline void ergodox_right_led_2_on(void) {} +inline void ergodox_right_led_3_off(void) {} +inline void ergodox_right_led_3_on(void) {} +inline void ergodox_right_led_on(uint8_t l) {} +inline void ergodox_right_led_off(uint8_t l) {} +inline void ergodox_board_led_off(void) {} +inline void ergodox_board_led_on(void) {} +inline void ergodox_led_all_on(void) {} +inline void ergodox_led_all_off(void) {} +inline void ergodox_right_led_1_set(uint8_t n) {} +inline void ergodox_right_led_2_set(uint8_t n) {} +inline void ergodox_right_led_3_set(uint8_t n) {} +inline void ergodox_right_led_set(uint8_t l, uint8_t n) {} +inline void ergodox_led_all_set(uint8_t n) {} + +#define KEYMAP( \ + \ + /* left hand, spatial positions */ \ + k00,k01,k02,k03,k04,k05,k06, \ + k10,k11,k12,k13,k14,k15,k16, \ + k20,k21,k22,k23,k24,k25, \ + k30,k31,k32,k33,k34,k35,k36, \ + k40,k41,k42,k43,k44, \ + k55,k56, \ + k54, \ + k53,k52,k51, \ + \ + /* right hand, spatial positions */ \ + k07,k08,k09,k0A,k0B,k0C,k0D, \ + k17,k18,k19,k1A,k1B,k1C,k1D, \ + k28,k29,k2A,k2B,k2C,k2D, \ + k37,k38,k39,k3A,k3B,k3C,k3D, \ + k49,k4A,k4B,k4C,k4D, \ + k57,k58, \ + k59, \ + k5C,k5B,k5A ) \ + \ + /* matrix positions */ \ + { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D }, \ + { k20, k21, k22, k23, k24, k25, KC_NO, KC_NO, k28, k29, k2A, k2B, k2C, k2D }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D }, \ + { k40, k41, k42, k43, k44, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4A, k4B, k4C, k4D }, \ + { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5A, k5B, k5C, KC_NO } \ + } + +#endif diff --git a/keyboards/ergodox/ergodone/expander.c b/keyboards/ergodox/ergodone/expander.c new file mode 100644 index 0000000000..0c8a2289c5 --- /dev/null +++ b/keyboards/ergodox/ergodone/expander.c @@ -0,0 +1,120 @@ +#include <stdbool.h> +#include "action.h" +#include "i2cmaster.h" +#include "expander.h" +#include "debug.h" + +static uint8_t expander_status = 0; +static uint8_t expander_input = 0; + +void expander_config(void); +uint8_t expander_write(uint8_t reg, uint8_t data); +uint8_t expander_read(uint8_t reg, uint8_t *data); + +void expander_init(void) +{ + i2c_init(); + expander_scan(); +} + +void expander_scan(void) +{ + dprintf("expander status: %d ... ", expander_status); + uint8_t ret = i2c_start(EXPANDER_ADDR | I2C_WRITE); + if (ret == 0) { + i2c_stop(); + if (expander_status == 0) { + dprintf("attached\n"); + expander_status = 1; + expander_config(); + clear_keyboard(); + } + } + else { + if (expander_status == 1) { + dprintf("detached\n"); + expander_status = 0; + clear_keyboard(); + } + } + dprintf("%d\n", expander_status); +} + +void expander_read_cols(void) +{ + expander_read(EXPANDER_REG_GPIOA, &expander_input); +} + +uint8_t expander_get_col(uint8_t col) +{ + if (col > 4) { + col++; + } + return expander_input & (1<<col) ? 1 : 0; +} + +matrix_row_t expander_read_row(void) +{ + expander_read_cols(); + + /* make cols */ + matrix_row_t cols = 0; + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + if (expander_get_col(col)) { + cols |= (1UL << (MATRIX_COLS - 1 - col)); + } + } + + return cols; +} + +void expander_unselect_rows(void) +{ + expander_write(EXPANDER_REG_IODIRB, 0xFF); +} + +void expander_select_row(uint8_t row) +{ + expander_write(EXPANDER_REG_IODIRB, ~(1<<(row+1))); +} + +void expander_config(void) +{ + expander_write(EXPANDER_REG_IPOLA, 0xFF); + expander_write(EXPANDER_REG_GPPUA, 0xFF); + expander_write(EXPANDER_REG_IODIRB, 0xFF); +} + +uint8_t expander_write(uint8_t reg, uint8_t data) +{ + if (expander_status == 0) { + return 0; + } + uint8_t ret; + ret = i2c_start(EXPANDER_ADDR | I2C_WRITE); + if (ret) goto stop; + ret = i2c_write(reg); + if (ret) goto stop; + ret = i2c_write(data); + stop: + i2c_stop(); + return ret; +} + +uint8_t expander_read(uint8_t reg, uint8_t *data) +{ + if (expander_status == 0) { + return 0; + } + uint8_t ret; + ret = i2c_start(EXPANDER_ADDR | I2C_WRITE); + if (ret) goto stop; + ret = i2c_write(reg); + if (ret) goto stop; + ret = i2c_rep_start(EXPANDER_ADDR | I2C_READ); + if (ret) goto stop; + *data = i2c_readNak(); + stop: + i2c_stop(); + return ret; +} diff --git a/keyboards/ergodox/ergodone/expander.h b/keyboards/ergodox/ergodone/expander.h new file mode 100644 index 0000000000..8676fed693 --- /dev/null +++ b/keyboards/ergodox/ergodone/expander.h @@ -0,0 +1,48 @@ +#ifndef EXPANDER_H +#define EXPANDER_H + +#include <stdint.h> +#include "matrix.h" + +#define MCP23017 +#define MCP23017_A0 0 +#define MCP23017_A1 0 +#define MCP23017_A2 0 + +#ifdef MCP23017 +#define EXPANDER_ADDR ((0x20|(MCP23017_A0<<0)|(MCP23017_A1<<1)|(MCP23017_A2<<2)) << 1) +enum EXPANDER_REG_BANK0 { + EXPANDER_REG_IODIRA = 0, + EXPANDER_REG_IODIRB, + EXPANDER_REG_IPOLA, + EXPANDER_REG_IPOLB, + EXPANDER_REG_GPINTENA, + EXPANDER_REG_GPINTENB, + EXPANDER_REG_DEFVALA, + EXPANDER_REG_DEFVALB, + EXPANDER_REG_INTCONA, + EXPANDER_REG_INTCONB, + EXPANDER_REG_IOCONA, + EXPANDER_REG_IOCONB, + EXPANDER_REG_GPPUA, + EXPANDER_REG_GPPUB, + EXPANDER_REG_INTFA, + EXPANDER_REG_INTFB, + EXPANDER_REG_INTCAPA, + EXPANDER_REG_INTCAPB, + EXPANDER_REG_GPIOA, + EXPANDER_REG_GPIOB, + EXPANDER_REG_OLATA, + EXPANDER_REG_OLATB +}; +#endif + +void expander_init(void); +void expander_scan(void); +void expander_read_cols(void); +uint8_t expander_get_col(uint8_t col); +matrix_row_t expander_read_row(void); +void expander_unselect_rows(void); +void expander_select_row(uint8_t row); + +#endif diff --git a/keyboards/ergodox/ergodone/i2cmaster.h b/keyboards/ergodox/ergodone/i2cmaster.h new file mode 100644 index 0000000000..3917b9e6c0 --- /dev/null +++ b/keyboards/ergodox/ergodone/i2cmaster.h @@ -0,0 +1,178 @@ +#ifndef _I2CMASTER_H +#define _I2CMASTER_H 1 +/************************************************************************* +* Title: C include file for the I2C master interface +* (i2cmaster.S or twimaster.c) +* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury +* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $ +* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 +* Target: any AVR device +* Usage: see Doxygen manual +**************************************************************************/ + +#ifdef DOXYGEN +/** + @defgroup pfleury_ic2master I2C Master library + @code #include <i2cmaster.h> @endcode + + @brief I2C (TWI) Master Software Library + + Basic routines for communicating with I2C slave devices. This single master + implementation is limited to one bus master on the I2C bus. + + This I2c library is implemented as a compact assembler software implementation of the I2C protocol + which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c). + Since the API for these two implementations is exactly the same, an application can be linked either against the + software I2C implementation or the hardware I2C implementation. + + Use 4.7k pull-up resistor on the SDA and SCL pin. + + Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module + i2cmaster.S to your target when using the software I2C implementation ! + + Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion. + + @note + The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted + to GNU assembler and AVR-GCC C call interface. + Replaced the incorrect quarter period delays found in AVR300 with + half period delays. + + @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury + + @par API Usage Example + The following code shows typical usage of this library, see example test_i2cmaster.c + + @code + + #include <i2cmaster.h> + + + #define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet + + int main(void) + { + unsigned char ret; + + i2c_init(); // initialize I2C library + + // write 0x75 to EEPROM address 5 (Byte Write) + i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode + i2c_write(0x05); // write address = 5 + i2c_write(0x75); // write value 0x75 to EEPROM + i2c_stop(); // set stop conditon = release bus + + + // read previously written value back from EEPROM address 5 + i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode + + i2c_write(0x05); // write address = 5 + i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode + + ret = i2c_readNak(); // read one byte from EEPROM + i2c_stop(); + + for(;;); + } + @endcode + +*/ +#endif /* DOXYGEN */ + +/**@{*/ + +#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 +#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" +#endif + +#include <avr/io.h> + +/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */ +#define I2C_READ 1 + +/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */ +#define I2C_WRITE 0 + + +/** + @brief initialize the I2C master interace. Need to be called only once + @param void + @return none + */ +extern void i2c_init(void); + + +/** + @brief Terminates the data transfer and releases the I2C bus + @param void + @return none + */ +extern void i2c_stop(void); + + +/** + @brief Issues a start condition and sends address and transfer direction + + @param addr address and transfer direction of I2C device + @retval 0 device accessible + @retval 1 failed to access device + */ +extern unsigned char i2c_start(unsigned char addr); + + +/** + @brief Issues a repeated start condition and sends address and transfer direction + + @param addr address and transfer direction of I2C device + @retval 0 device accessible + @retval 1 failed to access device + */ +extern unsigned char i2c_rep_start(unsigned char addr); + + +/** + @brief Issues a start condition and sends address and transfer direction + + If device is busy, use ack polling to wait until device ready + @param addr address and transfer direction of I2C device + @return none + */ +extern void i2c_start_wait(unsigned char addr); + + +/** + @brief Send one byte to I2C device + @param data byte to be transfered + @retval 0 write successful + @retval 1 write failed + */ +extern unsigned char i2c_write(unsigned char data); + + +/** + @brief read one byte from the I2C device, request more data from device + @return byte read from I2C device + */ +extern unsigned char i2c_readAck(void); + +/** + @brief read one byte from the I2C device, read is followed by a stop condition + @return byte read from I2C device + */ +extern unsigned char i2c_readNak(void); + +/** + @brief read one byte from the I2C device + + Implemented as a macro, which calls either i2c_readAck or i2c_readNak + + @param ack 1 send ack, request more data from device<br> + 0 send nak, read is followed by a stop condition + @return byte read from I2C device + */ +extern unsigned char i2c_read(unsigned char ack); +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + + +/**@}*/ +#endif diff --git a/keyboards/ergodox/ergodone/matrix.c b/keyboards/ergodox/ergodone/matrix.c new file mode 100644 index 0000000000..2eb8f24ba8 --- /dev/null +++ b/keyboards/ergodox/ergodone/matrix.c @@ -0,0 +1,295 @@ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include "wait.h" +#include "action_layer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "ergodone.h" +#include "expander.h" +#ifdef DEBUG_MATRIX_SCAN_RATE +#include "timer.h" +#endif + +/* + * This constant define not debouncing time in msecs, but amount of matrix + * scan loops which should be made to get stable debounced results. + * + * On Ergodox matrix scan rate is relatively low, because of slow I2C. + * Now it's only 317 scans/second, or about 3.15 msec/scan. + * According to Cherry specs, debouncing time is 5 msec. + * + * And so, there is no sense to have DEBOUNCE higher than 2. + */ + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; + +// Debouncing: store for each key the number of scans until it's eligible to +// change. When scanning the matrix, ignore any changes in keys that have +// already changed in the last DEBOUNCE scans. +static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS]; + +static matrix_row_t read_cols(uint8_t row); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +#ifdef DEBUG_MATRIX_SCAN_RATE +uint32_t matrix_timer; +uint32_t matrix_scan_count; +#endif + + +__attribute__ ((weak)) +void matrix_init_user(void) {} + +__attribute__ ((weak)) +void matrix_scan_user(void) {} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // disable JTAG + MCUCR = (1<<JTD); + MCUCR = (1<<JTD); + + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + for (uint8_t j=0; j < MATRIX_COLS; ++j) { + debounce_matrix[i * MATRIX_COLS + j] = 0; + } + } + +#ifdef DEBUG_MATRIX_SCAN_RATE + matrix_timer = timer_read32(); + matrix_scan_count = 0; +#endif + + matrix_init_quantum(); + +} + +void matrix_power_up(void) { + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } + +#ifdef DEBUG_MATRIX_SCAN_RATE + matrix_timer = timer_read32(); + matrix_scan_count = 0; +#endif +} + +// Returns a matrix_row_t whose bits are set if the corresponding key should be +// eligible to change in this scan. +matrix_row_t debounce_mask(uint8_t row) { + matrix_row_t result = 0; + for (uint8_t j=0; j < MATRIX_COLS; ++j) { + if (debounce_matrix[row * MATRIX_COLS + j]) { + --debounce_matrix[row * MATRIX_COLS + j]; + } else { + result |= (1 << j); + } + } + return result; +} + +// Report changed keys in the given row. Resets the debounce countdowns +// corresponding to each set bit in 'change' to DEBOUNCE. +void debounce_report(matrix_row_t change, uint8_t row) { + for (uint8_t i = 0; i < MATRIX_COLS; ++i) { + if (change & (1 << i)) { + debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE; + } + } +} + +uint8_t matrix_scan(void) +{ + expander_scan(); + +#ifdef DEBUG_MATRIX_SCAN_RATE + matrix_scan_count++; + + uint32_t timer_now = timer_read32(); + if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) { + print("matrix scan frequency: "); + pdec(matrix_scan_count); + print("\n"); + matrix_print(); + + matrix_timer = timer_now; + matrix_scan_count = 0; + } +#endif + + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + wait_us(30); // without this wait read unstable value. + matrix_row_t mask = debounce_mask(i); + matrix_row_t cols = (read_cols(i) & mask) | (matrix[i] & ~mask); + debounce_report(cols ^ matrix[i], i); + matrix[i] = cols; + + unselect_rows(); + } + + matrix_scan_quantum(); + + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +/* Column pin configuration + * + * Pro Micro: 6 5 4 3 2 1 0 + * PD3 PD2 PD4 PC6 PD7 PE6 PB4 + * + * Expander: 13 12 11 10 9 8 7 + */ +static void init_cols(void) +{ + // Pro Micro + DDRE &= ~(1<<PE6); + PORTE |= (1<<PE6); + DDRD &= ~(1<<PD2 | 1<<PD3 | 1<<PD4 | 1<<PD7); + PORTD |= (1<<PD2 | 1<<PD3 | 1<<PD4 | 1<<PD7); + DDRC &= ~(1<<PC6); + PORTC |= (1<<PC6); + DDRB &= ~(1<<PB4); + PORTB |= (1<<PB4); + + // MCP23017 + expander_init(); +} + +static matrix_row_t read_cols(uint8_t row) +{ + return expander_read_row() | + (PIND&(1<<PD3) ? 0 : (1<<6)) | + (PIND&(1<<PD2) ? 0 : (1<<5)) | + (PIND&(1<<PD4) ? 0 : (1<<4)) | + (PINC&(1<<PC6) ? 0 : (1<<3)) | + (PIND&(1<<PD7) ? 0 : (1<<2)) | + (PINE&(1<<PE6) ? 0 : (1<<1)) | + (PINB&(1<<PB4) ? 0 : (1<<0)) ; +} + +/* Row pin configuration + * + * Pro Micro: 0 1 2 3 4 5 + * F4 F5 F6 F7 B1 B2 + * + * Expander: 0 1 2 3 4 5 + */ +static void unselect_rows(void) +{ + // Pro Micro + DDRF &= ~(1<<PF4 | 1<<PF5 | 1<<PF6 | 1<<PF7); + PORTF &= ~(1<<PF4 | 1<<PF5 | 1<<PF6 | 1<<PF7); + DDRB &= ~(1<<PB1 | 1<<PB2); + PORTB &= ~(1<<PB1 | 1<<PB2); + + // Expander + expander_unselect_rows(); +} + +static void select_row(uint8_t row) +{ + // Pro Micro + switch (row) { + case 0: + DDRF |= (1<<PF4); + PORTF &= ~(1<<PF4); + break; + case 1: + DDRF |= (1<<PF5); + PORTF &= ~(1<<PF5); + break; + case 2: + DDRF |= (1<<PF6); + PORTF &= ~(1<<PF6); + break; + case 3: + DDRF |= (1<<PF7); + PORTF &= ~(1<<PF7); + break; + case 4: + DDRB |= (1<<PB1); + PORTB &= ~(1<<PB1); + break; + case 5: + DDRB |= (1<<PB2); + PORTB &= ~(1<<PB2); + break; + } + + expander_select_row(row); +} + diff --git a/keyboards/ergodox/ergodone/readme.md b/keyboards/ergodox/ergodone/readme.md new file mode 100644 index 0000000000..789819e67a --- /dev/null +++ b/keyboards/ergodox/ergodone/readme.md @@ -0,0 +1,26 @@ +ErgoDone +=== + +![ErgoDone](https://i.imgur.com/QERsQGQ.jpg) + +ErgoDone is a modified ErgoDox with pre-soldered components made by K.T.E.C. It has different wiring and uses a Pro Micro instead of Teensy. + + - Keyboard Maintainer: [Yu He](http://github.com/yuhe00) + - Hardware Supported: + - ErgoDone ver. 1.3 (tested) + - Hardware Availability: [KBDFans](https://kbdfans.myshopify.com/collections/pcb/products/ergodone-keyboard-pcb-1pcs-free-shipping?variant=37178300237) + +Make example for this keyboard (after setting up your build environment): + + make ergodox-ergodone-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +# Flashing the keyboard + +The ErgoDone uses an HID bootloader rather than the Teensy one, and requires a different way of flashing the firmware. + +1. While plugging in the USB cable, hold the two right-most keys on the left half of the ErgoDone to enter FLASH mode. +2. Use the `hid_bootloader_cli` utlity from [TKG Toolkit](https://github.com/kairyu/tkg-toolkit): + + hid_bootloader_cli -mmcu=atmega32u4 ergodox_ergodone_default diff --git a/keyboards/ergodox/ergodone/rules.mk b/keyboards/ergodox/ergodone/rules.mk new file mode 100644 index 0000000000..e7fd4e0aba --- /dev/null +++ b/keyboards/ergodox/ergodone/rules.mk @@ -0,0 +1,91 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make = Make software. +# +# make clean = Clean out built project files. +# +# That's pretty much all you need. To compile, always go make clean, +# followed by make. +# +# For advanced users only: +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +#---------------------------------------------------------------------------- + +# # project specific files +SRC = \ + twimaster.c \ + matrix.c \ + expander.c \ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +USB_6KRO_ENABLE = no # USB 6key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +KEYMAP_IN_EEPROM_ENABLE = no # External keymap in eeprom +KEYMAP_SECTION_ENABLE = no # Fixed address keymap for keymap editor +SOFTPWM_LED_ENABLE = no # Enable SoftPWM to drive backlight +FADING_LED_ENABLE = no # Enable fading backlight +BREATHING_LED_ENABLE = no # Enable breathing backlight +LEDMAP_ENABLE = no # Enable LED mapping +LEDMAP_IN_EEPROM_ENABLE = no # Read LED mapping from eeprom +ONEHAND_ENABLE = no # Disable Onehand +RGBLIGHT_ENABLE = no +MIDI_ENABLE = no diff --git a/keyboards/ergodox/ergodone/twimaster.c b/keyboards/ergodox/ergodone/twimaster.c new file mode 100644 index 0000000000..f91c08e6e4 --- /dev/null +++ b/keyboards/ergodox/ergodone/twimaster.c @@ -0,0 +1,208 @@ +/************************************************************************* +* Title: I2C master library using hardware TWI interface +* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury +* File: $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $ +* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 +* Target: any AVR device with hardware TWI +* Usage: API compatible with I2C Software Library i2cmaster.h +**************************************************************************/ +#include <inttypes.h> +#include <compat/twi.h> + +#include <i2cmaster.h> + + +/* define CPU frequency in Mhz here if not defined in Makefile */ +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +/* I2C clock in Hz */ +#define SCL_CLOCK 400000L + + +/************************************************************************* + Initialization of the I2C bus interface. Need to be called only once +*************************************************************************/ +void i2c_init(void) +{ + /* initialize TWI clock + * minimal values in Bit Rate Register (TWBR) and minimal Prescaler + * bits in the TWI Status Register should give us maximal possible + * I2C bus speed - about 444 kHz + * + * for more details, see 20.5.2 in ATmega16/32 secification + */ + + TWSR = 0; /* no prescaler */ + TWBR = 10; /* must be >= 10 for stable operation */ + +}/* i2c_init */ + + +/************************************************************************* + Issues a start condition and sends address and transfer direction. + return 0 = device accessible, 1= failed to access device +*************************************************************************/ +unsigned char i2c_start(unsigned char address) +{ + uint8_t twst; + + // send START condition + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + + // wait until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst != TW_START) && (twst != TW_REP_START)) return 1; + + // send device address + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + // wail until transmission completed and ACK/NACK has been received + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1; + + return 0; + +}/* i2c_start */ + + +/************************************************************************* + Issues a start condition and sends address and transfer direction. + If device is busy, use ack polling to wait until device is ready + + Input: address and transfer direction of I2C device +*************************************************************************/ +void i2c_start_wait(unsigned char address) +{ + uint8_t twst; + + + while ( 1 ) + { + // send START condition + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + + // wait until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst != TW_START) && (twst != TW_REP_START)) continue; + + // send device address + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + // wail until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst == TW_MT_SLA_NACK )||(twst ==TW_MR_DATA_NACK) ) + { + /* device busy, send stop condition to terminate write operation */ + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + // wait until stop condition is executed and bus released + while(TWCR & (1<<TWSTO)); + + continue; + } + //if( twst != TW_MT_SLA_ACK) return 1; + break; + } + +}/* i2c_start_wait */ + + +/************************************************************************* + Issues a repeated start condition and sends address and transfer direction + + Input: address and transfer direction of I2C device + + Return: 0 device accessible + 1 failed to access device +*************************************************************************/ +unsigned char i2c_rep_start(unsigned char address) +{ + return i2c_start( address ); + +}/* i2c_rep_start */ + + +/************************************************************************* + Terminates the data transfer and releases the I2C bus +*************************************************************************/ +void i2c_stop(void) +{ + /* send stop condition */ + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + // wait until stop condition is executed and bus released + while(TWCR & (1<<TWSTO)); + +}/* i2c_stop */ + + +/************************************************************************* + Send one byte to I2C device + + Input: byte to be transfered + Return: 0 write successful + 1 write failed +*************************************************************************/ +unsigned char i2c_write( unsigned char data ) +{ + uint8_t twst; + + // send data to the previously addressed device + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + // wait until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits + twst = TW_STATUS & 0xF8; + if( twst != TW_MT_DATA_ACK) return 1; + return 0; + +}/* i2c_write */ + + +/************************************************************************* + Read one byte from the I2C device, request more data from device + + Return: byte read from I2C device +*************************************************************************/ +unsigned char i2c_readAck(void) +{ + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA); + while(!(TWCR & (1<<TWINT))); + + return TWDR; + +}/* i2c_readAck */ + + +/************************************************************************* + Read one byte from the I2C device, read is followed by a stop condition + + Return: byte read from I2C device +*************************************************************************/ +unsigned char i2c_readNak(void) +{ + TWCR = (1<<TWINT) | (1<<TWEN); + while(!(TWCR & (1<<TWINT))); + + return TWDR; + +}/* i2c_readNak */ diff --git a/keyboards/ergodox/ergodox.h b/keyboards/ergodox/ergodox.h index f8ec8b5bf2..f060c8f996 100644 --- a/keyboards/ergodox/ergodox.h +++ b/keyboards/ergodox/ergodox.h @@ -6,5 +6,8 @@ #ifdef SUBPROJECT_infinity #include "infinity.h" #endif +#ifdef SUBPROJECT_ergodone + #include "ergodone.h" +#endif #endif /* KEYBOARDS_ERGODOX_ERGODOX_H_ */ diff --git a/keyboards/ergodox/ez/keymaps/drashna-custom/Makefile b/keyboards/ergodox/ez/keymaps/drashna-custom/Makefile new file mode 100644 index 0000000000..ba71b33eb5 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/drashna-custom/Makefile @@ -0,0 +1,10 @@ +TAP_DANCE_ENABLE = yes
+LAYER_UNDERGLOW_LIGHTING = yes
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+COMMAND_ENABLE = no # Commands for debug and configuration
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
diff --git a/keyboards/ergodox/ez/keymaps/drashna-custom/config.h b/keyboards/ergodox/ez/keymaps/drashna-custom/config.h new file mode 100644 index 0000000000..fe33552e15 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/drashna-custom/config.h @@ -0,0 +1,8 @@ + +#include "../../config.h" + + +#define TAPPING_TERM 200 + + +#define LAYER_UNDERGLOW_LIGHTING diff --git a/keyboards/ergodox/ez/keymaps/drashna-custom/keymap.c b/keyboards/ergodox/ez/keymaps/drashna-custom/keymap.c new file mode 100644 index 0000000000..1825447fbd --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/drashna-custom/keymap.c @@ -0,0 +1,867 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + + +#include "keymap_german.h" + +#include "keymap_nordic.h" + +// Define layer names +#define BASE 0 +#define COLEMAK 1 +#define DVORAK 2 +#define SYMB 3 +#define OVERWATCH 4 +#define DIABLO 5 +#define MOUS 6 + +//define modifiers +#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL)) +#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) + +//define macro keycodes +#define M_VERSION M(0) +#define M_SYMM M(1) +#define M_SALT M(2) +#define M_HARD M(3) +#define M_MAKE M(4) +#define M_COVECUBE M(5) +#define M_MORESALT M(6) +#define M_DOOMFIST M(7) + + +//define layer change stuff for underglow indicator +bool skip_leds = false; +bool has_layer_changed = false; +static uint8_t current_layer; + +static uint16_t key_timer; +//define diablo macro timer variables +static uint16_t diablo_timer[4]; +static uint8_t diablo_times[] = {0, 1, 3, 5, 10, 30}; +static uint8_t diablo_key_time[4]; + +bool check_dtimer(uint8_t dtimer) { + // has the correct number of seconds elapsed (as defined by diablo_times) + return (timer_elapsed(diablo_timer[dtimer]) < ( diablo_key_time[dtimer] * 1000 ) ) ? false : true; +}; + +bool checktime(void){ + return (timer_elapsed(key_timer) < 150) ? true : false; +}; + + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, + RGB_SLD, + RGB_0000FF, + RGB_008000, + RGB_FF0000, + RGB_800080, + RGB_00FF90, + KC_DIABLO_CLEAR +}; + +#ifdef TAP_DANCE_ENABLE +enum { + SFT_CAP = 0, + TD_DIABLO_J, + TD_CLN, + TD_EGG, + TD_FLSH, + TD_DIABLO_1, + TD_DIABLO_2, + TD_DIABLO_3, + TD_DIABLO_4 +}; + + + +void dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code (KC_RSFT); + register_code (KC_SCLN); + } else { + register_code (KC_SCLN); + } +} + +void dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code (KC_RSFT); + unregister_code (KC_SCLN); + } else { + unregister_code (KC_SCLN); + } +} + +void dance_egg (qk_tap_dance_state_t *state, void *user_data) { + if (state->count >= 10) { + SEND_STRING ("Safety dance!"); + reset_tap_dance (state); + } +} + +// on each tap, light up one led, from right to left +// on the forth tap, turn them off from right to left +void dance_flsh_each(qk_tap_dance_state_t *state, void *user_data) { + if (!skip_leds) { + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + skip_leds = true; + } + switch (state->count) { + case 1: + ergodox_right_led_3_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_1_on(); + break; + case 4: + ergodox_right_led_3_off(); + _delay_ms(50); + ergodox_right_led_2_off(); + _delay_ms(50); + ergodox_right_led_1_off(); + + } +} + +// on the fourth tap, set the keyboard on flash state +void dance_flsh_finished(qk_tap_dance_state_t *state, void *user_data) { + if (state->count >= 4) { +#ifdef LAYER_UNDERGLOW_LIGHTING + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(0xff,0x00,0x00); +#endif + reset_keyboard(); + reset_tap_dance(state); + } +} + +void diablo_tapdance_master (qk_tap_dance_state_t *state, void *user_data, uint8_t diablo_key) { + if (state->count >= 7) { + diablo_key_time[diablo_key] = diablo_times[0]; + reset_tap_dance(state); + } else { + diablo_key_time[diablo_key] = diablo_times[state->count - 1]; + } +} + +void diablo_tapdance1 (qk_tap_dance_state_t *state, void *user_data) { + diablo_tapdance_master (state, user_data, 0); +} + +void diablo_tapdance2 (qk_tap_dance_state_t *state, void *user_data) { + diablo_tapdance_master (state, user_data, 1); +} + +void diablo_tapdance3 (qk_tap_dance_state_t *state, void *user_data) { + diablo_tapdance_master (state, user_data, 2); +} + +void diablo_tapdance4 (qk_tap_dance_state_t *state, void *user_data) { + diablo_tapdance_master (state, user_data, 3); +} + + +// if the flash state didnt happen, then turn off leds, left to right +void dance_flsh_reset(qk_tap_dance_state_t *state, void *user_data) { + _delay_ms(200); + ergodox_right_led_1_off(); + _delay_ms(200); + ergodox_right_led_2_off(); + _delay_ms(200); + ergodox_right_led_3_off(); + _delay_ms(500); + skip_leds = false; +} + +//Tap Dance Definitions +qk_tap_dance_action_t tap_dance_actions[] = { + //Tap one for Space, and twice for Enter + [SFT_CAP] = ACTION_TAP_DANCE_DOUBLE(KC_LSHIFT, KC_CAPS), + // Special Z + [TD_DIABLO_J] = ACTION_TAP_DANCE_DOUBLE(KC_J, S(KC_J)), + // Once for colin, twice for semi-colin + [TD_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_cln_finished, dance_cln_reset), + // Tap until you get a surprise + [TD_EGG] = ACTION_TAP_DANCE_FN (dance_egg), + //Once for Blue, Twice for Green, Thrice for Red, and four to flash + [TD_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED (dance_flsh_each, dance_flsh_finished, dance_flsh_reset), + + [TD_DIABLO_1] = ACTION_TAP_DANCE_FN(diablo_tapdance1), + [TD_DIABLO_2] = ACTION_TAP_DANCE_FN(diablo_tapdance2), + [TD_DIABLO_3] = ACTION_TAP_DANCE_FN(diablo_tapdance3), + [TD_DIABLO_4] = ACTION_TAP_DANCE_FN(diablo_tapdance4), + +}; +#endif + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = + | 1 ! | 2 @ | 3 # | 4 $ | 5 % | TG(4)| | TG(4)| 6 ^ | 7 & | 8 * | 9 ( | 0 ) | - _ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | TAB | Q | W | E | R | T | TG(3)| |TG(3) | Y | U | I | O | P | \ | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Bksp | A | S | D | F | G |------| |------| H | J | K | L | ; | ' " | + * |--------+------+------+------+------+------| TG(2)| | TG(2)|------+------+------+------+------+--------| + * | Shift | Z | X | C | V | B | | | | N | M | , < | . > | UP | Shift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | `/SYM| ' " | LGUI | [ { | ] } | | SYMB | ? / | LEFT | DOWN |RIGHT | + * `----------------------------------' `----------------------------------' + * ,--------------. ,--------------. + * |Alt/Ap| Win | | Alt |Ctl/Esc| + * ,------|------|-------| |------+-------+------. + * | | | Home | | PgUp | | | + * | Space| Bksp |-------| |------| DEL |Enter | + * | | | End | | PgDn | | | + * `---------------------' `---------------------' + */ + [BASE] = KEYMAP( + KC_EQUAL, KC_1, KC_2, KC_3, KC_4, KC_5, TG(MOUS), + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(DIABLO), + KC_BSPACE, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSHIFT, CTL_T(KC_Z),KC_X, KC_C, KC_V, KC_B, TG(OVERWATCH), + LT(SYMB,KC_GRAVE),KC_QUOTE, KC_LGUI, KC_LBRACKET,KC_RBRACKET, + + ALT_T(KC_APPLICATION), KC_LGUI, + KC_HOME, + KC_SPACE, KC_BSPACE, KC_END, + + TG(SYMB), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, + TG(DVORAK), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLASH, + KC_H, KC_J, KC_K, KC_L, KC_SCOLON, GUI_T(KC_QUOTE), + TG(COLEMAK), KC_N, KC_M, KC_COMMA, KC_DOT, CTL_T(KC_SLASH),KC_RSHIFT, + KC_FN1, KC_LEFT, KC_UP, KC_DOWN, KC_RIGHT, + KC_LALT, CTL_T(KC_ESCAPE), + KC_PGUP, + KC_PGDOWN, KC_DELETE, KC_ENTER + ), +/* Keymap 1: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | F | P | G | L1 | | L1 | J | L | U | Y | ; | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | R | S | T | D |------| |------| H | N | E | I |O / L2| ' | + * |--------+------+------+------+------+------| OVER | | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | K | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[COLEMAK] = KEYMAP( + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, TG(MOUS), + KC_DELT, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(DIABLO), + KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, TG(OVERWATCH), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LBRACKET,KC_RBRACKET, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_TRANSPARENT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_NO, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, + KC_H, KC_N, KC_E, KC_I, LT(MOUS, KC_O), KC_QUOTE, + KC_TRANSPARENT,KC_K, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLASH),KC_RSHIFT, + KC_FN1, KC_LEFT, KC_UP, KC_DOWN, KC_RIGHT, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 2: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | \ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | ' | , | . | P | Y | L1 | | L1 | F | G | C | R | L | / | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | O | E | U | I |------| |------| D | H | T | N |S / L2| - | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |:/Ctrl| Q | J | K | X | | | | B | M | W | V |Z/Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[DVORAK] = KEYMAP( + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, TG(MOUS), + KC_DELT, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, TG(DIABLO), + KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, TG(OVERWATCH), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LBRACKET,KC_RBRACKET, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_TRANSPARENT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + KC_TRANSPARENT, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, + KC_D, KC_H, KC_T, KC_N, LT(MOUS, KC_S), KC_MINS, + KC_NO,KC_B, KC_M, KC_W, KC_V, CTL_T(KC_Z), KC_RSHIFT, + KC_FN1, KC_LEFT, KC_UP, KC_DOWN, KC_RIGHT, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), + + /* Keymap 3: Symbol Layer +* +* ,--------------------------------------------------. ,--------------------------------------------------. +* | ESC | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | +* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +* | VERSION| ! | @ | { | } | | | | | | + | 7 | 8 | 9 | * | F12 | +* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +* | MAKE | # | $ | ( | ) | ` |------| |------| - | 4 | 5 | 6 | / | PrtSc | +* |--------+------+------+------+------+------| COVE | | |------+------+------+------+------+--------| +* | RESET | % | ^ | [ | ] | ~ | CUBE | | | NUM | 1 | 2 | 3 | = | PAUSE | +* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' +* | LT0 | & | * | : | ; | | 0 | 0 | NUM. | ENT | ENT | +* `----------------------------------' `----------------------------------' +* ,-------------. ,-------------. +* | RGBM | RED | | OFF | SOLID| +* ,------|------|------| |------+------+------. +* | | | GREEN| | | | | +* | RGB | RGB |------| |------| NUM. | NUM0 | +* | DARK |BRITE | BLUE | | | | | +* `--------------------' `--------------------' +*/ + [SYMB] = KEYMAP( + KC_ESCAPE,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRANSPARENT, + M_VERSION, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRANSPARENT, + M_MAKE, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRAVE, + TD(TD_FLSH), KC_PERC, KC_CIRC, KC_LBRACKET,KC_RBRACKET,KC_TILD, M_COVECUBE, + KC_NO, KC_AMPR, KC_ASTR, KC_COLN, KC_SCOLON, + RGB_MOD, RGB_0000FF, + RGB_008000, + RGB_VAD, RGB_VAI, RGB_FF0000, + + KC_TRANSPARENT, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRANSPARENT, KC_KP_PLUS, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_ASTERISK, KC_F12, + KC_KP_MINUS, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_SLASH,KC_PSCREEN, + KC_TRANSPARENT, KC_NUMLOCK, KC_KP_1, KC_KP_2, KC_KP_3, KC_EQUAL, KC_PAUSE, + KC_KP_0, KC_KP_0, KC_KP_DOT, KC_KP_ENTER, KC_KP_ENTER, + RGB_TOG, RGB_SLD, + RGB_HUI, + RGB_HUD, KC_KP_DOT, KC_KP_0 + ), + +/* Keymap 4: Customized Overwatch Layout + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ESC | SALT | SYMM | MORE | DOOM | | | | | F9 | F10 | F11 | F12 | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | F1 | K | Q | W | E | R | T | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | TAB | G | A | S | D | F |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | LCTR | LSHFT| Z | X | C | M | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | J | U | I | Y | T | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | O | P | | | | + * ,------|------|------| |------+------+------. + * | | | LGUI | | | | | + * | V | SPACE|------ |------| | Enter| + * | | | H | | | | | + * `--------------------' `--------------------' + */ + [OVERWATCH] = KEYMAP( + KC_ESCAPE, M_SALT, M_SYMM, M_MORESALT, M_DOOMFIST, KC_NO, KC_NO, + KC_F1, KC_K, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_TAB, KC_G, KC_A, KC_S, KC_D, KC_F, + KC_LCTL, KC_LSHIFT, KC_Z, KC_X, KC_C, KC_M, KC_TRANSPARENT, + KC_G, KC_U, KC_I, KC_Y, KC_T, + KC_O, KC_P, + KC_LGUI, + KC_V, KC_SPACE, KC_H, + + KC_NO, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_ENTER + ), + +/* Keymap 3: + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ESC | V | D | ALT | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | TAB | S | I | F | M | T | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Q | 1 | 2 | 3 | 4 | G |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | NUMLOCK| NUM1 | NUM2 | NUM3 | NUM4 | Z | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LCTL | MAC1 | MAC2 | MAC3 | MAC4 | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | L | J | | | | + * ,------|------|------| |------+------+------. + * | | | G | | | | | + * | SPACE| Q |------ |------| | | + * | SHIFT| ALT | 0MAC | | | | | + * `--------------------' `--------------------' + */ + [DIABLO] = KEYMAP( + KC_ESCAPE, KC_V, KC_D, KC_LALT, KC_NO, KC_NO, KC_NO, + KC_TAB, KC_S, KC_I, KC_F, KC_M, KC_T, KC_TRANSPARENT, + KC_Q, KC_1, KC_2, KC_3, KC_4, KC_G, + KC_NUMLOCK, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_4, KC_Z, KC_NO, + KC_LCTL, TD(TD_DIABLO_1), TD(TD_DIABLO_2), TD(TD_DIABLO_3), TD(TD_DIABLO_4), + KC_L, KC_J, + KC_F, + SFT_T(KC_SPACE), ALT_T(KC_Q), KC_DIABLO_CLEAR, + + + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO + ), + +/* Keymap 4: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | MsUp | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | |MsLeft|MsDown|MsRght| | |------| |------| | | Acc0 | Acc1 | Acc2 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Acc0 | Acc1 | Acc2 | | | | | | Play | Stop | Mute |VolDn |VolUp | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | MWUp | | | | | + * | Lclk | Rclk |------| |------| MBn4 | MBn4 | + * | | | MWDn | | Mclk | | | + * `--------------------' `--------------------' + */ + [MOUS] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRANSPARENT, + KC_NO, KC_NO, KC_MS_UP, KC_NO, KC_NO, KC_NO, KC_TRANSPARENT, + KC_NO, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT,KC_NO, KC_NO, + KC_NO, KC_MS_ACCEL0,KC_MS_ACCEL1,KC_MS_ACCEL2,KC_NO, KC_NO, KC_TRANSPARENT, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO,KC_NO, + KC_MS_WH_UP, + KC_MS_BTN1,KC_MS_BTN2,KC_MS_WH_DOWN, + + KC_TRANSPARENT,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, + KC_TRANSPARENT,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, + KC_NO,KC_NO,KC_MS_ACCEL0,KC_MS_ACCEL1,KC_MS_ACCEL2,KC_NO,KC_NO, + KC_TRANSPARENT,KC_MEDIA_PLAY_PAUSE,KC_MEDIA_STOP,KC_AUDIO_MUTE,KC_AUDIO_VOL_DOWN,KC_AUDIO_VOL_UP,KC_NO, + KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, + KC_NO,KC_NO, + KC_NO, + KC_MS_BTN3,KC_MS_BTN4,KC_MS_BTN5 + ), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB), + // FN1 - Momentary Layer 1 (Symbols) + [2] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_UP), + [3] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_LEFT), + [4] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_DOWN), + [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_RIGHT), +}; + +void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) +{ + +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + // Output Keyboard Firmware info + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + return false; + } + case 1: + if (record->event.pressed) { + // Symmentra "Left Click to win" salt + return MACRO( I(50), T(ENTER), I(5), D(LSFT), T(L), U(LSFT), T(E), T(F), T(T), T(SPACE), T(C), T(L), T(I), T(C), T(K), T(SPACE), T(T), T(O), T(SPACE), T(W), T(I), T(N), D(LSFT), T(1), U(LSFT), T(ENTER), END ); + } + case 2: + if (record->event.pressed) { + //salt salt salt + return MACRO( I(50), T(ENTER), I(5), D(LSFT), T(S), U(LSFT), T(A), T(L), T(T), T(COMMA), T(SPACE), T(S), T(A), T(L), T(T), T(COMMA), T(SPACE), T(S), T(A), T(L), T(T), T(DOT), T(DOT), T(DOT), T(ENTER), END ); + } + case 3: + if (record->event.pressed) { + // your saltiness makes me hard + return MACRO( I(50), T(ENTER), I(5), D(LSFT), T(Y), U(LSFT), T(O), T(U), T(R), T(SPACE), T(S), T(A), T(L), T(T), T(SPACE), T(O), T(N), T(L), T(Y), T(SPACE), T(M), T(A), T(K), T(E), T(S), T(SPACE), T(M), T(Y), T(SPACE), T(P), T(E), T(N), T(I), T(S), T(SPACE), T(T), T(H), T(A), T(T), T(SPACE), T(M), T(U), T(C), T(H), T(SPACE), T(H), T(A), T(R), T(D), T(E), T(R), T(COMMA), T(SPACE), T(A), T(N), T(D), T(SPACE), T(E), T(V), T(E), T(N), T(SPACE), T(M), T(O), T(R), T(E), T(SPACE), T(A), T(G), T(G), T(R), T(E), T(S), T(S), T(I), T(V), T(E), D(LSFT), T(1), U(LSFT), T(ENTER), END ); + } + case 4: + if (record->event.pressed) { + // make ergodox-ez-drashna-custom-teensy + return MACRO( I(5), T(M), T(A), T(K), T(E), T(SPACE), T(E), T(R), T(G), T(O), T(D), T(O), T(X), T(MINUS), T(E), T(Z), T(MINUS), T(D), T(R), T(A), T(S), T(H), T(N), T(A), T(MINUS), T(C), T(U), T(S), T(T), T(O), T(M), T(MINUS), T(T), T(E), T(E), T(N), T(S), T(Y), T(ENTER), END ); + } + case 5: + if (record->event.pressed) { + //super secret hash + SEND_STRING("supersecrethash"); + return MACRO_NONE; + } + case 6: + if (record->event.pressed) { + // Please sir, can I have some more salt + return MACRO( I(50), T(ENTER), I(5), D(LSFT), T(P), U(LSFT), T(L), T(E), T(A), T(S), T(E), T(SPACE), T(S), T(I), T(R), T(COMMA), T(SPACE), T(C), T(A), T(N), T(SPACE), D(LSFT), T(I), U(LSFT), T(SPACE), T(H), T(A), T(V), T(E), T(SPACE), T(S), T(O), T(M), T(E), T(SPACE), T(M), T(O), T(R), T(E), T(SPACE), T(S), T(A), T(L), T(T), D(LSFT), T(SLASH), U(LSFT), D(LSFT), T(1), U(LSFT), T(ENTER), END ); + } + break; + case 7: + if (record->event.pressed) { + // DoomFisted + // Hey, look at me. I'm Doomfist, and I'm overpowered! + // All I do is spam punches all day! I'm DPS, tank and + // defense, rolled into one! All I need is team healing to be complete! + return MACRO( I(50), T(ENTER), I(5), D(LSFT), T(H), U(LSFT), T(E), T(Y), T(COMMA), T(SPACE), T(L), T(O), T(O), T(K), T(SPACE), T(A), T(T), T(SPACE), T(M), T(E), T(DOT), T(SPACE), T(SPACE), D(LSFT), T(I), U(LSFT), T(QUOTE), T(M), T(SPACE), D(LSFT), T(D), U(LSFT), T(O), T(O), T(M), T(F), T(I), T(S), T(T), T(COMMA), T(SPACE), T(A), T(N), T(D), T(SPACE), D(LSFT), T(I), U(LSFT), T(QUOTE), T(M), T(SPACE), T(O), T(V), T(E), T(R), T(P), T(O), T(W), T(E), T(R), T(E), T(D), D(LSFT), T(1), U(LSFT), T(SPACE), T(SPACE), D(LSFT), T(A), U(LSFT), T(L), T(L), T(SPACE), D(LSFT), T(I), U(LSFT), T(SPACE), T(D), T(O), T(SPACE), T(I), T(S), T(SPACE), T(S), T(P), T(A), T(M), T(SPACE), T(P), T(U), T(N), T(C), T(H), T(E), T(S), T(SPACE), T(A), T(L), T(L), T(SPACE), T(D), T(A), T(Y), D(LSFT), T(1), U(LSFT), T(SPACE), T(SPACE), T(SPACE), D(LSFT), T(I), U(LSFT), T(QUOTE), T(M), T(SPACE), D(LSFT), T(D), U(LSFT), D(LSFT), T(P), U(LSFT), D(LSFT), T(S), U(LSFT), T(COMMA), T(SPACE), T(T), T(A), T(N), T(K), T(SPACE), T(A), T(N), T(D), T(SPACE), T(D), T(E), T(F), T(E), T(N), T(S), T(E), T(COMMA), T(SPACE), T(R), T(O), T(L), T(L), T(E), T(D), T(SPACE), T(I), T(N), T(T), T(O), T(SPACE), T(O), T(N), T(E), D(LSFT), T(1), U(LSFT), T(SPACE), D(LSFT), T(A), U(LSFT), T(L), T(L), T(SPACE), D(LSFT), T(I), U(LSFT), T(SPACE), T(N), T(E), T(E), T(D), T(SPACE), T(I), T(S), T(SPACE), T(T), T(E), T(A), T(M), T(SPACE), T(H), T(E), T(A), T(L), T(I), T(N), T(G), T(SPACE), T(T), T(O), T(SPACE), T(B), T(E), T(SPACE), T(C), T(O), T(M), T(P), T(L), T(E), T(T), T(E), D(LSFT), T(1), U(LSFT), T(ENTER), END ); + } + case 8: //MAC1 - Hold for rshift and } on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(LSFT), END ); + } else { + return checktime() ? MACRO(U(LSFT),D(RALT),T(7),U(RALT),END): MACRO(U(LSFT),END); + }; break; + case 9: //MAC1 - Hold for rshift and } on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(RSFT), END ); + } else { + return checktime() ? MACRO(U(RSFT),D(RALT),T(0),U(RALT),END): MACRO(U(RSFT),END); + }; break; + case 10: //MAC2 - Hold for lctrl and [ on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(LCTL), END ); + } else {return checktime() ? MACRO(U(LCTL),D(RALT),T(8),U(RALT),END):MACRO(U(LCTL),END); + }; break; + case 11: //MAC3 - Hold for rctrl and ] on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(RCTL), END ); + } else { + return checktime() ? MACRO(U(RCTL),D(RALT),T(9),U(RALT),END):MACRO(U(RCTL),END); + }; break; + } + return MACRO_NONE; +}; + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case RGB_SLD: + if (record->event.pressed) { + rgblight_mode(1); + } + return false; + break; + + case RGB_0000FF: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(0x00,0x00,0xff); + #endif + } + return false; + break; + + case RGB_008000: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(0x00,0x80,0x00); + #endif + } + return false; + break; + + case RGB_FF0000: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(0xff,0x00,0x00); + #endif + } + return false; + break; + + case RGB_800080: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(0x80,0x00,0x80); + #endif + } + return false; + break; + + case RGB_00FF90: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(0x00,0xff,0x90); + #endif + } + return false; + break; + case KC_DIABLO_CLEAR: + if (record->event.pressed) { + uint8_t dtime; + + for (dtime = 0; dtime < 4; dtime++) { + diablo_key_time[dtime] = diablo_times[0]; + } + } + return false; + break; + + } + return true; +} + +void send_diablo_keystroke (uint8_t diablo_key) { + if (current_layer == DIABLO) { + switch (diablo_key) { + case 0: + SEND_STRING("1"); + break; + case 1: + SEND_STRING("2"); + break; + case 2: + SEND_STRING("3"); + break; + case 3: + SEND_STRING("4"); + break; + } + } +} + +void run_diablo_macro_check(void) { + uint8_t dtime; + + for (dtime = 0; dtime < 4; dtime++) { + if (check_dtimer(dtime) && diablo_key_time[dtime]) { + diablo_timer[dtime] = timer_read(); + send_diablo_keystroke(dtime); + } + } + +} + +void matrix_init_user(void) { // Runs boot tasks for keyboard + wait_ms(500); + ergodox_board_led_on(); + wait_ms(200); + ergodox_right_led_1_on(); + wait_ms(200); + ergodox_right_led_2_on(); + wait_ms(200); + ergodox_right_led_3_on(); + wait_ms(200); + ergodox_board_led_off(); + wait_ms(200); + ergodox_right_led_1_off(); + wait_ms(200); + ergodox_right_led_2_off(); + wait_ms(200); + ergodox_right_led_3_off(); + + +#ifdef LAYER_UNDERGLOW_LIGHTING + rgblight_enable(); + rgblight_sethsv(195,255,255); +#endif + has_layer_changed = false; + + + +}; + + + +void matrix_scan_user(void) { // runs frequently to update info + uint8_t modifiders = get_mods(); + uint8_t layer = biton32(layer_state); + + if (!skip_leds) { + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + + if ( modifiders & MODS_SHIFT_MASK) { + ergodox_right_led_1_on(); + } + if ( modifiders & MODS_CTRL_MASK) { + ergodox_right_led_2_on(); + } + if ( modifiders & MODS_ALT_MASK) { + ergodox_right_led_3_on(); + } + + } + + switch (layer) { + case SYMB: + #ifdef LAYER_UNDERGLOW_LIGHTING + if (has_layer_changed) { + rgblight_sethsv (240,255,255); + } + #else + ergodox_right_led_3_on(); + #endif + break; + case OVERWATCH: + #ifdef LAYER_UNDERGLOW_LIGHTING + if (has_layer_changed) { + rgblight_sethsv (30,255,255); + } + #else + ergodox_right_led_2_on(); + #endif + break; + case DIABLO: + #ifdef LAYER_UNDERGLOW_LIGHTING + if (has_layer_changed) { + rgblight_sethsv (0,255,255); + } + #else + ergodox_right_led_1_on(); + #endif + break; + case MOUS: + #ifdef LAYER_UNDERGLOW_LIGHTING + if (has_layer_changed) { + rgblight_sethsv (60,255,255); + } + #else + ergodox_right_led_3_on(); + ergodox_right_led_2_on(); + #endif + break; + case COLEMAK: + #ifdef LAYER_UNDERGLOW_LIGHTING + if (has_layer_changed) { + rgblight_sethsv (300,255,255); + } + #else + ergodox_right_led_1_on(); + ergodox_right_led_3_on(); + #endif + break; + case DVORAK: + #ifdef LAYER_UNDERGLOW_LIGHTING + if (has_layer_changed) { + rgblight_sethsv (120,255,255); + } + #else + ergodox_right_led_2_on(); + ergodox_right_led_1_on(); + #endif + break; + case 7: + #ifdef LAYER_UNDERGLOW_LIGHTING + if (has_layer_changed) { + rgblight_sethsv (255,255,255); + } + #else + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + #endif + break; + default: + // Do not add anything here, as this will be ran EVERY check, and can cause a significant slowdown + #ifdef LAYER_UNDERGLOW_LIGHTING + if (has_layer_changed) { + rgblight_sethsv (195,255,255); + } + #endif + break; + } + + if (current_layer == layer) { + has_layer_changed = false; + } else { + has_layer_changed = true; + current_layer = layer; + } + run_diablo_macro_check(); +}; + + diff --git a/keyboards/ergodox/ez/keymaps/drashna/Makefile b/keyboards/ergodox/ez/keymaps/drashna/Makefile new file mode 100644 index 0000000000..98da6c4ae6 --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/drashna/Makefile @@ -0,0 +1,6 @@ +RGBLIGHT_ENABLE = yes
+RGBLIGHT_ANIMATION = no
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
diff --git a/keyboards/ergodox/ez/keymaps/drashna/config.h b/keyboards/ergodox/ez/keymaps/drashna/config.h new file mode 100644 index 0000000000..258dc391fe --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/drashna/config.h @@ -0,0 +1,11 @@ + +#include "../../config.h" + + + +// make this easy to toggle behavior, so that it can be more easily toggled +#define LAYER_UNDERGLOW_LIGHTING + +#ifdef LAYER_UNDERGLOW_LIGHTING +#undef RGBLIGHT_ANIMATIONS +#endif
\ No newline at end of file diff --git a/keyboards/ergodox/ez/keymaps/drashna/keymap.c b/keyboards/ergodox/ez/keymaps/drashna/keymap.c new file mode 100644 index 0000000000..a6e5b3335a --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/drashna/keymap.c @@ -0,0 +1,195 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + + +#include "keymap_german.h" + +#include "keymap_nordic.h" + +#define VERSION M(0) + + +// Define layer names +#define BASE 0 +#define SYMB 1 +#define MOUS 2 + +#ifdef LAYER_UNDERGLOW_LIGHTING +bool has_layer_changed = true; + +#define rgblight_set_teal rgblight_setrgb(0x00, 0xFF, 0xFF) +#define rgblight_set_red rgblight_setrgb(0xFF, 0x00, 0x00) +#define rgblight_set_blue rgblight_setrgb(0x00, 0xFF, 0x00); +#define rgblight_set_green rgblight_setrgb(0x00, 0x00, 0xFF); +#define rgblight_set_yellow rgblight_setrgb(0xFF, 0xFF, 0x00); + + +#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL)) +#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#endif + + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, +#ifndef LAYER_UNDERGLOW_LIGHTING + RGB_SLD, +#endif +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = KEYMAP(KC_EQUAL,KC_1,KC_2,KC_3,KC_4,KC_5,KC_LEFT,KC_DELETE,KC_Q,KC_W,KC_E,KC_R,KC_T,TG(1),KC_BSPACE,KC_A,KC_S,KC_D,KC_F,KC_G,KC_LSHIFT,CTL_T(KC_Z),KC_X,KC_C,KC_V,KC_B,ALL_T(KC_NO),LT(1,KC_GRAVE),KC_QUOTE,LALT(KC_LSHIFT),KC_LEFT,KC_RIGHT,ALT_T(KC_APPLICATION),KC_LGUI,KC_HOME,KC_SPACE,KC_BSPACE,KC_END,KC_RIGHT,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINUS,TG(1),KC_Y,KC_U,KC_I,KC_O,KC_P,KC_BSLASH,KC_H,KC_J,KC_K,KC_L,LT(2,KC_SCOLON),GUI_T(KC_QUOTE),MEH_T(KC_NO),KC_N,KC_M,KC_COMMA,KC_DOT,CTL_T(KC_SLASH),KC_RSHIFT,KC_UP,KC_DOWN,KC_LBRACKET,KC_RBRACKET,MO(1),KC_LALT,CTL_T(KC_ESCAPE),KC_PGUP,KC_PGDOWN,KC_TAB,KC_ENTER), + +#ifdef LAYER_UNDERGLOW_LIGHTING + [1] = KEYMAP(KC_ESCAPE,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_TRANSPARENT,VERSION,KC_EXLM,KC_AT,KC_LCBR,KC_RCBR,KC_PIPE,KC_TRANSPARENT,VRSN,KC_HASH,KC_DLR,KC_LPRN,KC_RPRN,KC_GRAVE,RESET,KC_PERC,KC_CIRC,KC_LBRACKET,KC_RBRACKET,KC_TILD,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,RGB_VAD,RGB_VAI,KC_TRANSPARENT,KC_TRANSPARENT,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_TRANSPARENT,KC_UP,KC_7,KC_8,KC_9,KC_ASTR,KC_F12,KC_DOWN,KC_4,KC_5,KC_6,KC_PLUS,KC_TRANSPARENT,KC_TRANSPARENT,KC_AMPR,KC_1,KC_2,KC_3,KC_BSLASH,KC_TRANSPARENT,KC_TRANSPARENT,KC_DOT,KC_0,KC_EQUAL,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT), +#else + [1] = KEYMAP(KC_ESCAPE,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_TRANSPARENT,VERSION,KC_EXLM,KC_AT,KC_LCBR,KC_RCBR,KC_PIPE,KC_TRANSPARENT,VRSN,KC_HASH,KC_DLR,KC_LPRN,KC_RPRN,KC_GRAVE,RESET,KC_PERC,KC_CIRC,KC_LBRACKET,KC_RBRACKET,KC_TILD,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,RGB_MOD,KC_TRANSPARENT,KC_TRANSPARENT,RGB_VAD,RGB_VAI,KC_TRANSPARENT,KC_TRANSPARENT,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_TRANSPARENT,KC_UP,KC_7,KC_8,KC_9,KC_ASTR,KC_F12,KC_DOWN,KC_4,KC_5,KC_6,KC_PLUS,KC_TRANSPARENT,KC_TRANSPARENT,KC_AMPR,KC_1,KC_2,KC_3,KC_BSLASH,KC_TRANSPARENT,KC_TRANSPARENT,KC_DOT,KC_0,KC_EQUAL,KC_TRANSPARENT,RGB_TOG,RGB_SLD,KC_TRANSPARENT,KC_TRANSPARENT,RGB_HUD,RGB_HUI), +#endif + + [2] = KEYMAP(KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MS_UP,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MS_LEFT,KC_MS_DOWN,KC_MS_RIGHT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MS_BTN1,KC_MS_BTN2,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MEDIA_PLAY_PAUSE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MEDIA_PREV_TRACK,KC_MEDIA_NEXT_TRACK,KC_TRANSPARENT,KC_TRANSPARENT,KC_AUDIO_VOL_UP,KC_AUDIO_VOL_DOWN,KC_AUDIO_MUTE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_WWW_BACK), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(1) +}; + +// leaving this in place for compatibilty with old keymaps cloned and re-compiled. +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; +#ifndef LAYER_UNDERGLOW_LIGHTING + case RGB_SLD: + if (record->event.pressed) { + rgblight_mode(1); + } + return false; + break; +#endif + + } + return true; +} + + + + +void matrix_scan_user(void) { + + uint8_t new_layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + +#ifdef LAYER_UNDERGLOW_LIGHTING + static uint8_t old_layer = 0; + uint8_t modifiders = get_mods(); + + if ( modifiders & MODS_SHIFT_MASK) { + ergodox_right_led_1_on(); + } + if ( modifiders & MODS_CTRL_MASK) { + ergodox_right_led_2_on(); + } + if ( modifiders & MODS_ALT_MASK) { + ergodox_right_led_3_on(); + } + + if (old_layer != new_layer) { + has_layer_changed = true; + old_layer = new_layer; + } + if (has_layer_changed) { + switch (new_layer) { + case 1: + rgblight_set_red; + break; + case 2: + rgblight_set_blue; + break; + case 3: + rgblight_set_green; + break; + case 4: + rgblight_set_yellow; + break; + case 5: + rgblight_setrgb(0xFF, 0xFF, 0x00); + break; + case 6: + rgblight_setrgb(0xFF, 0xFF, 0x00); + break; + case 7: + rgblight_setrgb(0xFF, 0xFF, 0xFF); + break; + default: + rgblight_set_teal; + break; + } + has_layer_changed = false; + } + +#else + switch (new_layer) { + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_3_on(); + break; + case 4: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + break; + case 5: + ergodox_right_led_1_on(); + ergodox_right_led_3_on(); + break; + case 6: + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; + case 7: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; + default: + break; + } +#endif +}; diff --git a/keyboards/ergodox/ez/keymaps/drashna/readme.md b/keyboards/ergodox/ez/keymaps/drashna/readme.md new file mode 100644 index 0000000000..90fe44861a --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/drashna/readme.md @@ -0,0 +1,9 @@ +# Drashna's ErgoDox EZ Underglow Mod + +This is based on the default Ergodox EZ keymap. + +This modifieds the keymay so that it uses the underglow to indicate which layer you're on, rather than the top LEDs. + +Default colors are "teal" for base layer, "red" for Symbols, and "green" for mouse/media. Blue would be the next layer, if you had more. + +Additionally, the top LEDs are Shift/Control/Alt indicators instead (in that order).
\ No newline at end of file diff --git a/keyboards/ergodox/infinity/animations.c b/keyboards/ergodox/infinity/animations.c deleted file mode 100644 index ebc08fde36..0000000000 --- a/keyboards/ergodox/infinity/animations.c +++ /dev/null @@ -1,154 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#if defined(VISUALIZER_ENABLE) - -#include "animations.h" -#include "visualizer.h" -#ifdef LCD_ENABLE -#include "lcd_keyframes.h" -#endif -#ifdef LCD_BACKLIGHT_ENABLE -#include "lcd_backlight_keyframes.h" -#endif - -#ifdef BACKLIGHT_ENABLE -#include "led_keyframes.h" -#endif - -#include "visualizer_keyframes.h" - - -#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE) - -static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { -#ifdef LCD_ENABLE - lcd_keyframe_enable(animation, state); -#endif -#ifdef LCD_BACKLIGHT_ENABLE - backlight_keyframe_enable(animation, state); -#endif -#ifdef BACKLIGHT_ENABLE - led_keyframe_enable(animation, state); -#endif - return false; -} - -static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { -#ifdef LCD_ENABLE - lcd_keyframe_disable(animation, state); -#endif -#ifdef LCD_BACKLIGHT_ENABLE - backlight_keyframe_disable(animation, state); -#endif -#ifdef BACKLIGHT_ENABLE - led_keyframe_disable(animation, state); -#endif - return false; -} - -static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) { - bool ret = false; -#ifdef LCD_BACKLIGHT_ENABLE - ret |= backlight_keyframe_animate_color(animation, state); -#endif -#ifdef BACKLIGHT_ENABLE - ret |= led_keyframe_fade_in_all(animation, state); -#endif - return ret; -} - -static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) { - bool ret = false; -#ifdef LCD_BACKLIGHT_ENABLE - ret |= backlight_keyframe_animate_color(animation, state); -#endif -#ifdef BACKLIGHT_ENABLE - ret |= led_keyframe_fade_out_all(animation, state); -#endif - return ret; -} - - -// Don't worry, if the startup animation is long, you can use the keyboard like normal -// during that time -keyframe_animation_t default_startup_animation = { - .num_frames = 3, - .loop = false, - .frame_lengths = {0, 0, gfxMillisecondsToTicks(5000)}, - .frame_functions = { - keyframe_enable, - lcd_keyframe_draw_logo, - keyframe_fade_in, - }, -}; - -keyframe_animation_t default_suspend_animation = { - .num_frames = 3, - .loop = false, - .frame_lengths = {0, gfxMillisecondsToTicks(1000), 0}, - .frame_functions = { - lcd_keyframe_display_layer_text, - keyframe_fade_out, - keyframe_disable, - }, -}; -#endif - -#if defined(BACKLIGHT_ENABLE) -#define CROSSFADE_TIME 1000 -#define GRADIENT_TIME 3000 - -keyframe_animation_t led_test_animation = { - .num_frames = 14, - .loop = true, - .frame_lengths = { - gfxMillisecondsToTicks(1000), // fade in - gfxMillisecondsToTicks(1000), // no op (leds on) - gfxMillisecondsToTicks(1000), // fade out - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom - 0, // mirror leds - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom - 0, // normal leds - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - - }, - .frame_functions = { - led_keyframe_fade_in_all, - keyframe_no_operation, - led_keyframe_fade_out_all, - led_keyframe_crossfade, - led_keyframe_left_to_right_gradient, - led_keyframe_crossfade, - led_keyframe_top_to_bottom_gradient, - led_keyframe_mirror_orientation, - led_keyframe_crossfade, - led_keyframe_left_to_right_gradient, - led_keyframe_crossfade, - led_keyframe_top_to_bottom_gradient, - led_keyframe_normal_orientation, - led_keyframe_crossfade, - }, -}; -#endif - -#endif diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/ergodox/infinity/board_is31fl3731c.h index 2ea73f1fb3..f248cc25ba 100644 --- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h +++ b/keyboards/ergodox/infinity/board_is31fl3731c.h @@ -22,9 +22,6 @@ static const I2CConfig i2ccfg = { 400000 // clock speed (Hz); 400kHz max for IS31 }; -#define GDISP_SCREEN_WIDTH 7 -#define GDISP_SCREEN_HEIGHT 7 - static const uint8_t led_mask[] = { 0xFF, 0x00, /* C1-1 -> C1-16 */ 0xFF, 0x00, /* C2-1 -> C2-16 */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/board_st7565.h index 9650ffb440..9ab636c95d 100644 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h +++ b/keyboards/ergodox/infinity/board_st7565.h @@ -83,7 +83,7 @@ static GFXINLINE void init_board(GDisplay *g) { } static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; + (void) g; } static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { @@ -106,8 +106,8 @@ static GFXINLINE void enter_cmd_mode(GDisplay *g) { static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - spiSend(&SPID1, length, data); + (void) g; + spiSend(&SPID1, length, data); } #endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h index 25cc8af0fc..c46edeb7b2 100644 --- a/keyboards/ergodox/infinity/config.h +++ b/keyboards/ergodox/infinity/config.h @@ -51,16 +51,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SERIAL_LINK_BAUD 562500 #define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1) -// The visualizer needs gfx thread priorities -#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) #define VISUALIZER_USER_DATA_SIZE 16 -#define LCD_DISPLAY_NUMBER 0 -#define LED_DISPLAY_NUMBER 1 - -#define LED_NUM_ROWS 7 -#define LED_NUM_COLS 7 /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk deleted file mode 100644 index f32d0d8685..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/gdisp/IS31FL3731C -GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c deleted file mode 100644 index b4a5c84b0a..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c +++ /dev/null @@ -1,312 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "gfx.h" - -#if GFX_USE_GDISP - -#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_ERGODOX -#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h" -#include "src/gdisp/gdisp_driver.h" - -#include "board_IS31FL3731C.h" - - -// Can't include led_tables from here -extern const uint8_t CIE1931_CURVE[]; - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 9 -#endif -#ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 16 -#endif -#ifndef GDISP_INITIAL_CONTRAST - #define GDISP_INITIAL_CONTRAST 0 -#endif -#ifndef GDISP_INITIAL_BACKLIGHT - #define GDISP_INITIAL_BACKLIGHT 0 -#endif - -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) - -#define IS31_ADDR_DEFAULT 0x74 - -#define IS31_REG_CONFIG 0x00 -// bits in reg -#define IS31_REG_CONFIG_PICTUREMODE 0x00 -#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 -#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 -// D2:D0 bits are starting frame for autoplay mode - -#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode - -#define IS31_REG_AUTOPLAYCTRL1 0x02 -// D6:D4 number of loops (000=infty) -// D2:D0 number of frames to be used - -#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) - -#define IS31_REG_DISPLAYOPT 0x05 -#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames -#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 -// D2:D0 bits blink period time (*0.27s) - -#define IS31_REG_AUDIOSYNC 0x06 -#define IS31_REG_AUDIOSYNC_ENABLE 0x1 - -#define IS31_REG_FRAMESTATE 0x07 - -#define IS31_REG_BREATHCTRL1 0x08 -// D6:D4 fade out time (26ms*2^i) -// D2:D0 fade in time (26ms*2^i) - -#define IS31_REG_BREATHCTRL2 0x09 -#define IS31_REG_BREATHCTRL2_ENABLE 0x10 -// D2:D0 extinguish time (3.5ms*2^i) - -#define IS31_REG_SHUTDOWN 0x0A -#define IS31_REG_SHUTDOWN_OFF 0x0 -#define IS31_REG_SHUTDOWN_ON 0x1 - -#define IS31_REG_AGCCTRL 0x0B -#define IS31_REG_ADCRATE 0x0C - -#define IS31_COMMANDREGISTER 0xFD -#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' -#define IS31_FUNCTIONREG_SIZE 0xD - -#define IS31_FRAME_SIZE 0xB4 - -#define IS31_PWM_REG 0x24 -#define IS31_PWM_SIZE 0x90 - -#define IS31_LED_MASK_SIZE 0x12 -#define IS31_SCREEN_WIDTH 16 - -#define IS31 - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct{ - uint8_t write_buffer_offset; - uint8_t write_buffer[IS31_FRAME_SIZE]; - uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; - uint8_t page; -}__attribute__((__packed__)) PrivData; - -// Some common routines and macros -#define PRIV(g) ((PrivData*)g->priv) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -static GFXINLINE void write_page(GDisplay* g, uint8_t page) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = IS31_COMMANDREGISTER; - tx[1] = page; - write_data(g, tx, 2); -} - -static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = reg; - tx[1] = data; - write_page(g, page); - write_data(g, tx, 2); -} - -static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { - PRIV(g)->write_buffer_offset = offset; - write_page(g, page); - write_data(g, (uint8_t*)PRIV(g), length + 1); -} - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - __builtin_memset(PRIV(g), 0, sizeof(PrivData)); - PRIV(g)->page = 0; - - // Initialise the board interface - init_board(g); - gfxSleepMilliseconds(10); - - // zero function page, all registers (assuming full_page is all zeroes) - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - set_hardware_shutdown(g, false); - gfxSleepMilliseconds(10); - // software shutdown - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - // zero function page, all registers - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - gfxSleepMilliseconds(10); - - - // zero all LED registers on all 8 pages, and enable the mask - __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); - for(uint8_t i=0; i<8; i++) { - write_ram(g, i, 0, IS31_FRAME_SIZE); - gfxSleepMilliseconds(1); - } - - // software shutdown disable (i.e. turn stuff on) - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - - // Finish Init - post_init_board(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -#if GDISP_HARDWARE_FLUSH - LLDSPEC void gdisp_lld_flush(GDisplay *g) { - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - PRIV(g)->page++; - PRIV(g)->page %= 2; - // TODO: some smarter algorithm for this - // We should run only one physical page at a time - // This way we don't need to send so much data, and - // we could use slightly less memory - uint8_t* src = PRIV(g)->frame_buffer; - for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) { - for (int x=0;x<GDISP_SCREEN_WIDTH;x++) { - uint8_t val = (uint16_t)*src * g->g.Backlight / 100; - PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val]; - ++src; - } - } - write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); - gfxSleepMilliseconds(1); - write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_DRAWPIXEL - LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); - g->flags |= GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_PIXELREAD - LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); - } -#endif - -#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL - LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - break; - case powerOn: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_BACKLIGHT: - if (g->g.Backlight == (unsigned)g->p.ptr) - return; - unsigned val = (unsigned)g->p.ptr; - g->g.Backlight = val > 100 ? 100 : val; - g->flags |= GDISP_FLG_NEEDFLUSH; - return; - } - } -#endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h deleted file mode 100644 index bb28ad775e..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE - -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk deleted file mode 100644 index 889a1a0317..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/gdisp/st7565ergodox -GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c deleted file mode 100644 index b04ad02935..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#include "gfx.h" - -#if GFX_USE_GDISP - -#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX -#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h" -#include "src/gdisp/gdisp_driver.h" - -#include "board_ST7565.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#ifndef GDISP_SCREEN_HEIGHT -#define GDISP_SCREEN_HEIGHT 32 -#endif -#ifndef GDISP_SCREEN_WIDTH -#define GDISP_SCREEN_WIDTH 128 -#endif -#ifndef GDISP_INITIAL_CONTRAST -#define GDISP_INITIAL_CONTRAST 35 -#endif -#ifndef GDISP_INITIAL_BACKLIGHT -#define GDISP_INITIAL_BACKLIGHT 100 -#endif - -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) - -#include "drivers/gdisp/st7565ergodox/st7565.h" - -/*===========================================================================*/ -/* Driver config defaults for backward compatibility. */ -/*===========================================================================*/ -#ifndef ST7565_LCD_BIAS -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 -#endif -#ifndef ST7565_ADC -#define ST7565_ADC ST7565_ADC_NORMAL -#endif -#ifndef ST7565_COM_SCAN -#define ST7565_COM_SCAN ST7565_COM_SCAN_INC -#endif -#ifndef ST7565_PAGE_ORDER -#define ST7565_PAGE_ORDER 0,1,2,3 -#endif - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct{ - bool_t buffer2; - uint8_t data_pos; - uint8_t data[16]; - uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8]; -}PrivData; - -// Some common routines and macros -#define PRIV(g) ((PrivData*)g->priv) -#define RAM(g) (PRIV(g)->ram) - -static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) { - PRIV(g)->data[PRIV(g)->data_pos++] = cmd; -} - -static GFXINLINE void flush_cmd(GDisplay* g) { - write_data(g, PRIV(g)->data, PRIV(g)->data_pos); - PRIV(g)->data_pos = 0; -} - -#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } -#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } - -// Some common routines and macros -#define delay(us) gfxSleepMicroseconds(us) -#define delay_ms(ms) gfxSleepMilliseconds(ms) - -#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) -#define xybit(y) (1<<((y)&7)) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/* - * As this controller can't update on a pixel boundary we need to maintain the - * the entire display surface in memory so that we can do the necessary bit - * operations. Fortunately it is a small display in monochrome. - * 64 * 128 / 8 = 1024 bytes. - */ - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - PRIV(g)->buffer2 = false; - PRIV(g)->data_pos = 0; - - // Initialise the board interface - init_board(g); - - // Hardware reset - setpin_reset(g, TRUE); - gfxSleepMilliseconds(20); - setpin_reset(g, FALSE); - gfxSleepMilliseconds(20); - acquire_bus(g); - enter_cmd_mode(g); - - write_cmd(g, ST7565_RESET); - write_cmd(g, ST7565_LCD_BIAS); - write_cmd(g, ST7565_ADC); - write_cmd(g, ST7565_COM_SCAN); - - write_cmd(g, ST7565_RESISTOR_RATIO | 0x1); - write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST); - - // turn on internal power supply (VC=1, VR=1, VF=1) - write_cmd(g, ST7565_POWER_CONTROL | 0x07); - - write_cmd(g, ST7565_INVERT_DISPLAY); - write_cmd(g, ST7565_ALLON_NORMAL); - - write_cmd(g, ST7565_START_LINE | 0); - write_cmd(g, ST7565_RMW); - flush_cmd(g); - - // Finish Init - post_init_board(g); - - // Release the bus - release_bus(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -#if GDISP_HARDWARE_FLUSH -LLDSPEC void gdisp_lld_flush(GDisplay *g) { - unsigned p; - - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - acquire_bus(g); - enter_cmd_mode(g); - unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); - for (p = 0; p < 4; p++) { - write_cmd(g, ST7565_PAGE | (p + dstOffset)); - write_cmd(g, ST7565_COLUMN_MSB | 0); - write_cmd(g, ST7565_COLUMN_LSB | 0); - write_cmd(g, ST7565_RMW); - flush_cmd(g); - enter_data_mode(g); - write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); - enter_cmd_mode(g); - } - unsigned line = (PRIV(g)->buffer2 ? 32 : 0); - write_cmd(g, ST7565_START_LINE | line); - flush_cmd(g); - PRIV(g)->buffer2 = !PRIV(g)->buffer2; - release_bus(g); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; -} -#endif - -#if GDISP_HARDWARE_DRAWPIXEL -LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT-1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = GDISP_SCREEN_HEIGHT-1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT-1 - g->p.y; - y = g->p.x; - break; - } - if (gdispColor2Native(g->p.color) != Black) - RAM(g)[xyaddr(x, y)] |= xybit(y); - else - RAM(g)[xyaddr(x, y)] &= ~xybit(y); - g->flags |= GDISP_FLG_NEEDFLUSH; -} -#endif - -#if GDISP_HARDWARE_PIXELREAD -LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT-1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = GDISP_SCREEN_HEIGHT-1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT-1 - g->p.y; - y = g->p.x; - break; - } - return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; -} -#endif - -LLDSPEC void gdisp_lld_blit_area(GDisplay *g) { - uint8_t* buffer = (uint8_t*)g->p.ptr; - int linelength = g->p.cx; - for (int i = 0; i < g->p.cy; i++) { - unsigned dstx = g->p.x; - unsigned dsty = g->p.y + i; - unsigned srcx = g->p.x1; - unsigned srcy = g->p.y1 + i; - unsigned srcbit = srcy * g->p.x2 + srcx; - for(int j=0; j < linelength; j++) { - uint8_t src = buffer[srcbit / 8]; - uint8_t bit = 7-(srcbit % 8); - uint8_t bitset = (src >> bit) & 1; - uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]); - if (bitset) { - *dst |= xybit(dsty); - } - else { - *dst &= ~xybit(dsty); - } - dstx++; - srcbit++; - } - } - g->flags |= GDISP_FLG_NEEDFLUSH; -} - -#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL -LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - acquire_bus(g); - enter_cmd_mode(g); - write_cmd(g, ST7565_DISPLAY_OFF); - flush_cmd(g); - release_bus(g); - break; - case powerOn: - acquire_bus(g); - enter_cmd_mode(g); - write_cmd(g, ST7565_DISPLAY_ON); - flush_cmd(g); - release_bus(g); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_CONTRAST: - g->g.Contrast = (unsigned)g->p.ptr & 63; - acquire_bus(g); - enter_cmd_mode(g); - write_cmd2(g, ST7565_CONTRAST, g->g.Contrast); - flush_cmd(g); - release_bus(g); - return; - } -} -#endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h deleted file mode 100644 index 2b66a877c8..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE -#define GDISP_HARDWARE_BITFILLS TRUE - -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h deleted file mode 100644 index 24924ff050..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _ST7565_H -#define _ST7565_H - -#define ST7565_CONTRAST 0x81 -#define ST7565_ALLON_NORMAL 0xA4 -#define ST7565_ALLON 0xA5 -#define ST7565_POSITIVE_DISPLAY 0xA6 -#define ST7565_INVERT_DISPLAY 0xA7 -#define ST7565_DISPLAY_OFF 0xAE -#define ST7565_DISPLAY_ON 0xAF - -#define ST7565_LCD_BIAS_7 0xA3 -#define ST7565_LCD_BIAS_9 0xA2 - -#define ST7565_ADC_NORMAL 0xA0 -#define ST7565_ADC_REVERSE 0xA1 - -#define ST7565_COM_SCAN_INC 0xC0 -#define ST7565_COM_SCAN_DEC 0xC8 - -#define ST7565_START_LINE 0x40 -#define ST7565_PAGE 0xB0 -#define ST7565_COLUMN_MSB 0x10 -#define ST7565_COLUMN_LSB 0x00 -#define ST7565_RMW 0xE0 - -#define ST7565_RESISTOR_RATIO 0x20 -#define ST7565_POWER_CONTROL 0x28 - -#define ST7565_RESET 0xE2 - -#endif /* _ST7565_H */ diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h index 45b9f58580..ca338399d3 100644 --- a/keyboards/ergodox/infinity/gfxconf.h +++ b/keyboards/ergodox/infinity/gfxconf.h @@ -22,310 +22,6 @@ #ifndef _GFXCONF_H #define _GFXCONF_H - -/////////////////////////////////////////////////////////////////////////// -// GOS - One of these must be defined, preferably in your Makefile // -/////////////////////////////////////////////////////////////////////////// -//#define GFX_USE_OS_CHIBIOS TRUE -//#define GFX_USE_OS_FREERTOS FALSE -// #define GFX_FREERTOS_USE_TRACE FALSE -//#define GFX_USE_OS_WIN32 FALSE -//#define GFX_USE_OS_LINUX FALSE -//#define GFX_USE_OS_OSX FALSE -//#define GFX_USE_OS_ECOS FALSE -//#define GFX_USE_OS_RAWRTOS FALSE -//#define GFX_USE_OS_ARDUINO FALSE -//#define GFX_USE_OS_KEIL FALSE -//#define GFX_USE_OS_CMSIS FALSE -//#define GFX_USE_OS_RAW32 FALSE -// #define INTERRUPTS_OFF() optional_code -// #define INTERRUPTS_ON() optional_code -// These are not defined by default for some reason -#define GOS_NEED_X_THREADS FALSE -#define GOS_NEED_X_HEAP FALSE - -// Options that (should where relevant) apply to all operating systems - #define GFX_NO_INLINE FALSE -// #define GFX_COMPILER GFX_COMPILER_UNKNOWN -// #define GFX_CPU GFX_CPU_UNKNOWN -// #define GFX_OS_HEAP_SIZE 0 -// #define GFX_OS_NO_INIT FALSE -// #define GFX_OS_INIT_NO_WARNING FALSE -// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine -// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine -// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine - - -/////////////////////////////////////////////////////////////////////////// -// GDISP // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GDISP TRUE - -//#define GDISP_NEED_AUTOFLUSH FALSE -//#define GDISP_NEED_TIMERFLUSH FALSE -//#define GDISP_NEED_VALIDATION TRUE -//#define GDISP_NEED_CLIP TRUE -#define GDISP_NEED_CIRCLE TRUE -#define GDISP_NEED_ELLIPSE TRUE -#define GDISP_NEED_ARC TRUE -#define GDISP_NEED_ARCSECTORS TRUE -#define GDISP_NEED_CONVEX_POLYGON TRUE -//#define GDISP_NEED_SCROLL FALSE -#define GDISP_NEED_PIXELREAD TRUE -#define GDISP_NEED_CONTROL TRUE -//#define GDISP_NEED_QUERY FALSE -//#define GDISP_NEED_MULTITHREAD FALSE -//#define GDISP_NEED_STREAMING FALSE -#define GDISP_NEED_TEXT TRUE -// #define GDISP_NEED_TEXT_WORDWRAP FALSE -// #define GDISP_NEED_ANTIALIAS FALSE -// #define GDISP_NEED_UTF8 FALSE - #define GDISP_NEED_TEXT_KERNING TRUE -// #define GDISP_INCLUDE_FONT_UI1 FALSE -// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font. -// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE - #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE -// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE -// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE - #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE -// #define GDISP_INCLUDE_USER_FONTS FALSE - -//#define GDISP_NEED_IMAGE FALSE -// #define GDISP_NEED_IMAGE_NATIVE FALSE -// #define GDISP_NEED_IMAGE_GIF FALSE -// #define GDISP_NEED_IMAGE_BMP FALSE -// #define GDISP_NEED_IMAGE_BMP_1 FALSE -// #define GDISP_NEED_IMAGE_BMP_4 FALSE -// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE -// #define GDISP_NEED_IMAGE_BMP_8 FALSE -// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE -// #define GDISP_NEED_IMAGE_BMP_16 FALSE -// #define GDISP_NEED_IMAGE_BMP_24 FALSE -// #define GDISP_NEED_IMAGE_BMP_32 FALSE -// #define GDISP_NEED_IMAGE_JPG FALSE -// #define GDISP_NEED_IMAGE_PNG FALSE -// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE -#ifdef EMULATOR -#define GDISP_NEED_PIXMAP TRUE -#endif -// #define GDISP_NEED_PIXMAP_IMAGE FALSE - -//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used. -//#define GDISP_LINEBUF_SIZE 128 -//#define GDISP_STARTUP_COLOR Black -#define GDISP_NEED_STARTUP_LOGO FALSE - -//#define GDISP_TOTAL_DISPLAYS 2 - -#ifndef EMULATOR -#define GDISP_DRIVER_LIST GDISPVMT_ST7565_ERGODOX, GDISPVMT_IS31FL3731C_ERGODOX -#else -#define GDISP_DRIVER_LIST GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX -#endif - - #ifdef GDISP_DRIVER_LIST - // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability - #define GDISP_HARDWARE_STREAM_WRITE FALSE - #define GDISP_HARDWARE_STREAM_READ FALSE - #define GDISP_HARDWARE_STREAM_POS FALSE - #define GDISP_HARDWARE_DRAWPIXEL TRUE - #define GDISP_HARDWARE_CLEARS FALSE - #define GDISP_HARDWARE_FILLS FALSE - //#define GDISP_HARDWARE_BITFILLS FALSE - #define GDISP_HARDWARE_SCROLL FALSE - #define GDISP_HARDWARE_PIXELREAD TRUE - #define GDISP_HARDWARE_CONTROL TRUE - #define GDISP_HARDWARE_QUERY FALSE - #define GDISP_HARDWARE_CLIP FALSE - - #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 - #endif - -// The custom format is not defined for some reason, so define it as error -// so we don't get compiler warnings -#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR - -#define GDISP_USE_GFXNET FALSE -// #define GDISP_GFXNET_PORT 13001 -// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE -// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE -// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GWIN // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GWIN FALSE - -//#define GWIN_NEED_WINDOWMANAGER FALSE -// #define GWIN_REDRAW_IMMEDIATE FALSE -// #define GWIN_REDRAW_SINGLEOP FALSE -// #define GWIN_NEED_FLASHING FALSE -// #define GWIN_FLASHING_PERIOD 250 - -//#define GWIN_NEED_CONSOLE FALSE -// #define GWIN_CONSOLE_USE_HISTORY FALSE -// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE -// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE -// #define GWIN_CONSOLE_ESCSEQ FALSE -// #define GWIN_CONSOLE_USE_BASESTREAM FALSE -// #define GWIN_CONSOLE_USE_FLOAT FALSE -//#define GWIN_NEED_GRAPH FALSE -//#define GWIN_NEED_GL3D FALSE - -//#define GWIN_NEED_WIDGET FALSE -//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 -// #define GWIN_NEED_LABEL FALSE -// #define GWIN_LABEL_ATTRIBUTE FALSE -// #define GWIN_NEED_BUTTON FALSE -// #define GWIN_BUTTON_LAZY_RELEASE FALSE -// #define GWIN_NEED_SLIDER FALSE -// #define GWIN_SLIDER_NOSNAP FALSE -// #define GWIN_SLIDER_DEAD_BAND 5 -// #define GWIN_SLIDER_TOGGLE_INC 20 -// #define GWIN_NEED_CHECKBOX FALSE -// #define GWIN_NEED_IMAGE FALSE -// #define GWIN_NEED_IMAGE_ANIMATION FALSE -// #define GWIN_NEED_RADIO FALSE -// #define GWIN_NEED_LIST FALSE -// #define GWIN_NEED_LIST_IMAGES FALSE -// #define GWIN_NEED_PROGRESSBAR FALSE -// #define GWIN_PROGRESSBAR_AUTO FALSE -// #define GWIN_NEED_KEYBOARD FALSE -// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 -// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE -// #define GWIN_NEED_TEXTEDIT FALSE -// #define GWIN_FLAT_STYLING FALSE -// #define GWIN_WIDGET_TAGS FALSE - -//#define GWIN_NEED_CONTAINERS FALSE -// #define GWIN_NEED_CONTAINER FALSE -// #define GWIN_NEED_FRAME FALSE -// #define GWIN_NEED_TABSET FALSE -// #define GWIN_TABSET_TABHEIGHT 18 - - -/////////////////////////////////////////////////////////////////////////// -// GEVENT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GEVENT TRUE - -//#define GEVENT_ASSERT_NO_RESOURCE FALSE -//#define GEVENT_MAXIMUM_SIZE 32 -//#define GEVENT_MAX_SOURCE_LISTENERS 32 - - -/////////////////////////////////////////////////////////////////////////// -// GTIMER // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GTIMER FALSE - -//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY -//#define GTIMER_THREAD_WORKAREA_SIZE 2048 - - -/////////////////////////////////////////////////////////////////////////// -// GQUEUE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GQUEUE FALSE - -//#define GQUEUE_NEED_ASYNC FALSE -//#define GQUEUE_NEED_GSYNC FALSE -//#define GQUEUE_NEED_FSYNC FALSE -//#define GQUEUE_NEED_BUFFERS FALSE - -/////////////////////////////////////////////////////////////////////////// -// GINPUT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GINPUT FALSE - -//#define GINPUT_NEED_MOUSE FALSE -// #define GINPUT_TOUCH_STARTRAW FALSE -// #define GINPUT_TOUCH_NOTOUCH FALSE -// #define GINPUT_TOUCH_NOCALIBRATE FALSE -// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE -// #define GINPUT_MOUSE_POLL_PERIOD 25 -// #define GINPUT_MOUSE_CLICK_TIME 300 -// #define GINPUT_TOUCH_CXTCLICK_TIME 700 -// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE -// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE -// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 -//#define GINPUT_NEED_KEYBOARD FALSE -// #define GINPUT_KEYBOARD_POLL_PERIOD 200 -// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 -// #define GKEYBOARD_LAYOUT_OFF FALSE -// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE -//#define GINPUT_NEED_TOGGLE FALSE -//#define GINPUT_NEED_DIAL FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GFILE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GFILE FALSE - -//#define GFILE_NEED_PRINTG FALSE -//#define GFILE_NEED_SCANG FALSE -//#define GFILE_NEED_STRINGS FALSE -//#define GFILE_NEED_FILELISTS FALSE -//#define GFILE_NEED_STDIO FALSE -//#define GFILE_NEED_NOAUTOMOUNT FALSE -//#define GFILE_NEED_NOAUTOSYNC FALSE - -//#define GFILE_NEED_MEMFS FALSE -//#define GFILE_NEED_ROMFS FALSE -//#define GFILE_NEED_RAMFS FALSE -//#define GFILE_NEED_FATFS FALSE -//#define GFILE_NEED_NATIVEFS FALSE -//#define GFILE_NEED_CHBIOSFS FALSE - -//#define GFILE_ALLOW_FLOATS FALSE -//#define GFILE_ALLOW_DEVICESPECIFIC FALSE -//#define GFILE_MAX_GFILES 3 - -/////////////////////////////////////////////////////////////////////////// -// GADC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GADC FALSE - -//#define GADC_MAX_LOWSPEED_DEVICES 4 - - -/////////////////////////////////////////////////////////////////////////// -// GAUDIO // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GAUDIO FALSE -// There seems to be a bug in the ugfx code, the wrong define is used -// So define it in order to avoid warnings -#define GFX_USE_GAUDIN GFX_USE_GAUDIO -// #define GAUDIO_NEED_PLAY FALSE -// #define GAUDIO_NEED_RECORD FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GMISC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GMISC TRUE - -//#define GMISC_NEED_ARRAYOPS FALSE -//#define GMISC_NEED_FASTTRIG FALSE -//#define GMISC_NEED_FIXEDTRIG FALSE -//#define GMISC_NEED_INVSQRT FALSE -// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE -// #define GMISC_INVSQRT_REAL_SLOW FALSE -#define GMISC_NEED_MATRIXFLOAT2D TRUE -#define GMISC_NEED_MATRIXFIXED2D FALSE +#include "common_gfxconf.h" #endif /* _GFXCONF_H */ diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk index bbb0f6efea..a341bbfce8 100644 --- a/keyboards/ergodox/infinity/rules.mk +++ b/keyboards/ergodox/infinity/rules.mk @@ -1,7 +1,6 @@ # project specific files SRC = matrix.c \ - led.c \ - animations.c + led.c ## chip/board settings # - the next two should match the directories in @@ -67,5 +66,10 @@ LCD_BACKLIGHT_ENABLE = yes MIDI_ENABLE = no RGBLIGHT_ENABLE = no -include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk -include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
\ No newline at end of file +LCD_DRIVER = st7565 +LCD_WIDTH = 128 +LCD_HEIGHT = 32 + +LED_DRIVER = is31fl3731c +LED_WIDTH = 7 +LED_HEIGHT = 7
\ No newline at end of file diff --git a/keyboards/ergodox/infinity/simple_visualizer.h b/keyboards/ergodox/infinity/simple_visualizer.h index ded8a3222e..73d0e08870 100644 --- a/keyboards/ergodox/infinity/simple_visualizer.h +++ b/keyboards/ergodox/infinity/simple_visualizer.h @@ -34,7 +34,7 @@ #include "lcd_backlight_keyframes.h" #include "system/serial_link.h" #include "led.h" -#include "animations.h" +#include "default_animations.h" static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF); static const uint32_t initial_color = LCD_COLOR(0, 0, 0); @@ -58,7 +58,7 @@ static keyframe_animation_t color_animation = { // this prevents the color from changing when activating the layer // momentarily .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)}, - .frame_functions = {keyframe_no_operation, backlight_keyframe_animate_color}, + .frame_functions = {keyframe_no_operation, lcd_backlight_keyframe_animate_color}, }; void initialize_user_visualizer(visualizer_state_t* state) { diff --git a/keyboards/ergodox/infinity/visualizer.c b/keyboards/ergodox/infinity/visualizer.c index 5b6b320074..4b16021abc 100644 --- a/keyboards/ergodox/infinity/visualizer.c +++ b/keyboards/ergodox/infinity/visualizer.c @@ -31,7 +31,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "lcd_keyframes.h" #include "lcd_backlight_keyframes.h" #include "system/serial_link.h" -#include "animations.h" +#include "default_animations.h" static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF); static const uint32_t initial_color = LCD_COLOR(0, 0, 0); @@ -79,7 +79,7 @@ static keyframe_animation_t one_led_color = { .num_frames = 1, .loop = false, .frame_lengths = {gfxMillisecondsToTicks(0)}, - .frame_functions = {backlight_keyframe_set_color}, + .frame_functions = {lcd_backlight_keyframe_set_color}, }; bool swap_led_target_color(keyframe_animation_t* animation, visualizer_state_t* state) { @@ -94,7 +94,7 @@ static keyframe_animation_t two_led_colors = { .num_frames = 2, .loop = true, .frame_lengths = {gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(0)}, - .frame_functions = {backlight_keyframe_set_color, swap_led_target_color}, + .frame_functions = {lcd_backlight_keyframe_set_color, swap_led_target_color}, }; // The LCD animation alternates between the layer name display and a diff --git a/keyboards/ergodox/keymaps/333fred/Makefile b/keyboards/ergodox/keymaps/333fred/Makefile index 17f736458c..2992054341 100644 --- a/keyboards/ergodox/keymaps/333fred/Makefile +++ b/keyboards/ergodox/keymaps/333fred/Makefile @@ -3,7 +3,7 @@ LCD_BACKLIGHT_ENABLE = yes LCD_ENABLE = yes BACKLIGHT_ENABLE = yes NKRO_ENABLE = yes -TAP_DANCE_ENABLE = yes +KEY_LOCK_ENABLE = yes ifndef QUANTUM_DIR include ../../../../Makefile diff --git a/keyboards/ergodox/keymaps/333fred/keymap.c b/keyboards/ergodox/keymaps/333fred/keymap.c index e3f95132d3..c1722c1226 100644 --- a/keyboards/ergodox/keymaps/333fred/keymap.c +++ b/keyboards/ergodox/keymaps/333fred/keymap.c @@ -40,15 +40,6 @@ enum custom_macros { KEEPASS_TYPE, }; -// Tap Dance Definitions -enum tap_dance_custom_keys { - TD_SEMICOLON_COLON = 0 -}; - -qk_tap_dance_action_t tap_dance_actions[] = { - [TD_SEMICOLON_COLON] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_COLON) -}; - // NOTE: Cells marked with ACCESS must remain transparent, they're the keys that actually get to that layer const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -59,14 +50,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | TAB | Q | W | E | R | T | L2 | | L2 | Y | U | I | O | P | \ | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | Esc | A | S | D |LT 3,F| G |------| |------| H | J | K | L |; / : | ' | + * | Esc | A | S | D |LT 3,F| G |------| |------| H | J | K | L | ; | ' | * |--------+------+------+------+------+------| L1 | |MO(3) |------+------+------+------+------+--------| * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' * |LCTRL | F4 | F5 | LGUI | LALT | | Left | Down | Up | Right| RGUI | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. - * | Copy | Paste| | Alt |Ctrl/Esc| + * | Copy | Paste| | Alt | Lock | * ,------|------|------| |------+--------+------. * | | | PgUp | | PgDn | | | * | Bcksp|OSL(2)|------| |------| Ent |Space | @@ -86,12 +77,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_PGUP, KC_BSPC,OSL(SYMB), KC_DEL, // right hand - TG(CODE), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, TD(TD_SEMICOLON_COLON),KC_QUOT, - MO(MDIA), KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), OSM(MOD_RSFT), - KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT, KC_RGUI, - KC_RALT, CTL_T(KC_ESC), + TG(CODE), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + MO(MDIA), KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), OSM(MOD_RSFT), + KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT, KC_RGUI, + KC_RALT, KC_LOCK, KC_PGDN, KC_RCTL, KC_ENT, KC_SPC ), diff --git a/keyboards/ergodox/keymaps/french_hacker/keymap.c b/keyboards/ergodox/keymaps/french_hacker/keymap.c new file mode 100644 index 0000000000..33b84c2d8d --- /dev/null +++ b/keyboards/ergodox/keymaps/french_hacker/keymap.c @@ -0,0 +1,365 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" +#include "keymap_french.h" + +#define BASE 0 // default Colemak Mod-DH layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys +#define ACC 3 // accented characters + +#define QCOPY 0 // Qubes OS VM to VM copy +#define QPASTE 1 // Qubes OS VM to VM paste +#define M_ACIRC 2 // â +#define M_ECIRC 3 // ê +#define M_ICIRC 4 // î +#define M_OCIRC 5 // ô +#define M_UCIRC 6 // û +#define M_YCIRC 7 // ŷ +#define M_AUMLT 8 // ä +#define M_EUMLT 9 // ë +#define M_IUMLT 10 // ï +#define M_OUMLT 11 // ö +#define M_UUMLT 12 // ü +#define M_YUMLT 13 // ÿ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Base Colemak Mod-DH layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | Q | W | F | P | B | TO(0)| |TO(2) | J | L | U | Y | ; | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Tab | A | R | S | T | G |------| |------| M | N | E | I | O | Bcksp | + * |--------+------+------+------+------+------| TO(1)| |OSL(3)|------+------+------+------+------+--------| + * | LShift | Z | X | C | D | V | | | | K | H | , | . | : | Rshift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | Ins | Caps | Left | Right| MO(2)| | MO(2)| Down | Up | PgDn | PgUp | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |QCopy | Ralt | | Ralt |QPaste| + * ,------|------|------| |------+------+------. + * | | | Home | | End | | | + * | Space| Ctrl |------| |------| Ctrl |Enter | + * | | | LAlt | | LAlt | | | + * `--------------------' `--------------------' + */ + // If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, + KC_TRNS, FR_Q, FR_W, KC_F, KC_P, KC_B, TO(BASE), + KC_TAB, FR_A, KC_R, KC_S, KC_T, KC_G, + KC_LSFT, FR_Z, KC_X, KC_C, KC_D, KC_V, TO(SYMB), + KC_INS, KC_CAPS, KC_LEFT,KC_RIGHT, MO(SYMB), + M(QCOPY), KC_RALT, + KC_HOME, + KC_SPC,KC_LCTRL, KC_LALT, + // right hand + KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + TO(MDIA), KC_J, KC_L, KC_U, KC_Y, FR_SCLN, KC_TRNS, + FR_M, KC_N, KC_E, KC_I, KC_O, KC_BSPC, + OSL(ACC), KC_K, KC_H, FR_COMM, FR_DOT, FR_COLN, KC_RSFT, + MO(SYMB), KC_DOWN, KC_UP, KC_PGDN, KC_PGUP, + + KC_RALT, M(QPASTE), + KC_END, + KC_LALT,KC_RCTL, KC_ENT + ), + + +/* Keymap 1: Symbol Layer + * // TODO missing: ¤ + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | § | < | { | \ | ~ | | | | % | @ | } | > | µ | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | ' | = | - | ( | + |------| |------| * | ) | _ | / | " | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | ` | ? | # | [ | | | | | | & | ] | $ | ! | ^ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | € | £ | $ | | | | | | | ß | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,FR_SECT,FR_LESS, FR_LCBR,FR_BSLS,FR_TILD,KC_TRNS, + KC_TRNS,FR_APOS,FR_EQL, FR_MINS,FR_LPRN,FR_PLUS, + KC_TRNS,FR_GRV,FR_QUES,FR_HASH,FR_LBRC,FR_PIPE,KC_TRNS, + FR_EURO,FR_PND,FR_DLR,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, FR_PERC, FR_AT, FR_RCBR, FR_GRTR, FR_MU, KC_F12, + FR_ASTR, FR_RPRN, FR_UNDS, FR_SLSH, FR_QUOT, KC_TRNS, + KC_TRNS, FR_AMP, FR_RBRC, FR_DLR, FR_EXLM, FR_CIRC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, ALGR(KC_S), KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | Lclk | Rclk | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), + +/* Keymap 3: accented characters + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | à | â | ä | | | | | | | î | ï | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | é | è | ê | ë | |------| |------| | | ô | ö | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | ù | û | ü | | | | | | | ŷ | ÿ | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// ACCENTED CHARACTERS +[ACC] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, FR_AGRV, M(M_ACIRC), M(M_AUMLT), KC_TRNS, KC_TRNS, + KC_TRNS, FR_EACU, FR_EGRV, M(M_ECIRC), M(M_EUMLT), KC_TRNS, + KC_TRNS, KC_TRNS, FR_UGRV, M(M_UCIRC), M(M_UUMLT), KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, M(M_ICIRC), M(M_IUMLT), KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, M(M_OCIRC), M(M_OUMLT), KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, M(M_YCIRC), M(M_YUMLT), KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case QCOPY: + if (record->event.pressed) { + return MACRO(I(255), + D(LCTRL), + T(C), + D(LSFT), + T(C), + U(LCTRL), + U(LSFT), + END); + } + break; + case QPASTE: + if (record->event.pressed) { + return MACRO(I(255), + D(LCTRL), + D(LSFT), + T(V), + U(LCTRL), + T(INS), + U(LSFT), + END); + } + break; + case M_ACIRC: + if (record->event.pressed) { + return MACRO(T(LBRC), // FR_CIRC + T(Q), // FR_A + END); + } + break; + case M_ECIRC: + if (record->event.pressed) { + return MACRO(T(LBRC), // FR_CIRC + T(E), + END); + } + break; + case M_UCIRC: + if (record->event.pressed) { + return MACRO(T(LBRC), // FR_CIRC + T(U), + END); + } + break; + case M_ICIRC: + if (record->event.pressed) { + return MACRO(T(LBRC), // FR_CIRC + T(I), + END); + } + break; + case M_OCIRC: + if (record->event.pressed) { + return MACRO(T(LBRC), // FR_CIRC + T(O), + END); + } + break; + case M_YCIRC: + if (record->event.pressed) { + return MACRO(T(LBRC), // FR_CIRC + T(Y), + END); + } + break; + case M_AUMLT: + if (record->event.pressed) { + return MACRO(D(LSFT), + T(LBRC), + U(LSFT), + T(Q), + END); + } + break; + case M_EUMLT: + if (record->event.pressed) { + return MACRO(D(LSFT), + T(LBRC), + U(LSFT), + T(E), + END); + } + break; + case M_UUMLT: + if (record->event.pressed) { + return MACRO(D(LSFT), + T(LBRC), + U(LSFT), + T(U), + END); + } + break; + case M_IUMLT: + if (record->event.pressed) { + return MACRO(D(LSFT), + T(LBRC), + U(LSFT), + T(I), + END); + } + break; + case M_OUMLT: + if (record->event.pressed) { + return MACRO(D(LSFT), + T(LBRC), + U(LSFT), + T(O), + END); + } + break; + case M_YUMLT: + if (record->event.pressed) { + return MACRO(D(LSFT), + T(LBRC), + U(LSFT), + T(Y), + END); + } + break; + + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case SYMB: + ergodox_right_led_1_on(); + break; + case MDIA: + ergodox_right_led_2_on(); + break; + case ACC: + ergodox_right_led_3_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/french_hacker/readme.md b/keyboards/ergodox/keymaps/french_hacker/readme.md new file mode 100644 index 0000000000..6b0575af13 --- /dev/null +++ b/keyboards/ergodox/keymaps/french_hacker/readme.md @@ -0,0 +1,30 @@ +# French hacker layout + +## Introduction + +[Colemak Mod-DH](https://colemakmods.github.io/mod-dh/) layout for +users keeping an `azerty` layout configuration on their OS. + +This keymap is for users keeping their operating systems configured with +`azerty` - for typing passwords or in their native languages - but who +wants a Colemak Mod-DH layout on their mechanical. + +The symbols layers was done after analysing various programming +languages sources codes and should be close to optimal for typing +confort. + +Special macros for [Qubes OS](https://www.qubes-os.org/) are included. + +There is an accented characters layer for infrequent typing of french +accents. + +Special macros for [Qubes OS](https://www.qubes-os.org/) are included. + +## Build + + cd keyboards/ergodox + make french_hacker + +## Design explanations + +See my [blog post](http://dialectical-computing.de/blog/blog/2017/01/29/a-better-coder-layout-for-the-ergodox-ez-keyboard/). diff --git a/keyboards/ergodox/keymaps/replicaJunction/config.h b/keyboards/ergodox/keymaps/replicaJunction/config.h index d32b46e4e6..df349a72dc 100644 --- a/keyboards/ergodox/keymaps/replicaJunction/config.h +++ b/keyboards/ergodox/keymaps/replicaJunction/config.h @@ -58,6 +58,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef SUBPROJECT_infinity #include "infinity/config.h" #endif +#ifdef SUBPROJECT_ergodone + #include "ergodone/config.h" +#endif #endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */ diff --git a/keyboards/ergodox/keymaps/swedish-lindhe/keymap.c b/keyboards/ergodox/keymaps/swedish-lindhe/keymap.c new file mode 100644 index 0000000000..9f3e82184d --- /dev/null +++ b/keyboards/ergodox/keymaps/swedish-lindhe/keymap.c @@ -0,0 +1,199 @@ +/* Copyright 2017 Andreas Lindhé + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_swedish.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Print | ! | " | # | # | % | | |Middle| & | / | ( | ) | = | ? | + * | Screen | 1 | 2 @ | 3 £ | 4 $ | 5 | F11 | |Mouse | 6 | 7 { | 8 [ | 9 ] | 0 } | + \ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | ~L1 | | L1 | Y | U | I | O | P | Å | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | Ö | Ä | + * |--------+------+------+------+------+------| ` | | Del |------+------+------+------+------+--------| + * | LShft | Z | X | C | V | B | ' | | | N | M | , | . | - | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LCtl | ^ | * | LAlt | LGui | | AltGr| Down | Up | Left | Right| + * | (') | " ~ | ' ´ | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,--------------. + * | LCtl | LAlt | | Home | End | + * ,------|------|------| |------+-------+------. + * | | | ~ | | PgUp | | | + * | Space|Back- |------| |------| Tab |Enter | + * | |space | Esc | | PgDn | | L2 | + * `--------------------' `---------------------' + */ + +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_PSCR, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F11, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, MO(SYMB), + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, NO_ACUT, + CTL_T(NO_APOS), NO_CIRC, NO_ASTR, KC_LALT, KC_LGUI, + KC_LCTRL, KC_LALT, + NO_TILD, + KC_SPC, KC_BSPC, KC_ESC, + // right hand + KC_MS_BTN3, KC_6, KC_7, KC_8, KC_9, KC_0, NO_PLUS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AA, + KC_H, KC_J, KC_K, KC_L, NO_OSLH, NO_AE, + KC_DELT, KC_N, KC_M, KC_COMM, KC_DOT, NO_MINS, KC_RSFT, + NO_ALGR, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, + KC_HOME, KC_END, + KC_PGUP, + KC_PGDN, KC_TAB, LT(MDIA, KC_ENT) +), + +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | / | * | - | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | F1 | F2 | F3 | F4 | | | | | | 7 | 8 | 9 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | F5 | F6 | F7 | F8 | |------| |------| | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | F9 | F10 | F11 | F12 | | | | | | 1 | 2 | 3 | Enter| | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | 0 | , | . | Enter| | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_TRNS, KC_TRNS, + KC_TRNS, KC_F5, KC_F6, KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_PSLS, KC_PAST, KC_PMNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_PPLS, KC_TRNS, + KC_TRNS, KC_4, KC_5, KC_6, KC_PPLS, KC_TRNS, + RESET, KC_TRNS, KC_1, KC_2, KC_3, KC_PENT, KC_TRNS, + KC_0, KC_COMM, KC_DOT, KC_PENT, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | Play | Pause| Prev | Next | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | Lclk | Rclk | | | | | |VolDn |VolUp | Mute | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * |LeClk |RiClk |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_MPLY, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_3_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; + default: + // none + break; + } + + if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { + // if capslk is on, set led 1 on + ergodox_right_led_1_on(); + } else { + ergodox_right_led_1_off(); + } + +}; diff --git a/keyboards/ergodox/keymaps/swedish-lindhe/readme.md b/keyboards/ergodox/keymaps/swedish-lindhe/readme.md new file mode 100644 index 0000000000..ef62d9499c --- /dev/null +++ b/keyboards/ergodox/keymaps/swedish-lindhe/readme.md @@ -0,0 +1,50 @@ +# swedish-lindhe ErgoDox (EZ) keymap + +This is a setup that is very useful for me. It may or may not be for +you. I will use it in conjunction with the A5 overlayed sv_SE layout. + +The layout is subject to change (in particular I'm thinking about adding +a macro recording feature), but it have not changed much the past year +or two so you can expect it to be stable enough to learn it. + +A5: http://aoeu.info/s/dvorak/svorak +My xkb map: https://github.com/lindhe/dotfiles/blob/master/usr/share/X11/xkb/symbols/se-A5 + +The most major points: +====================== + +I think the layout image can be found on +[www.keyboard-layout-editor.com](http://www.keyboard-layout-editor.com/#/gists/d84bc5915707cb30a4f9f754e06ecea3) + +L0: +--- + +* Easily accessible F11 key for fullscreening +* Print screen +* Middle mouse button for X-paste +* Improved reachability of meta buttons (LCtrl, LALt, AltGr, LGui etc.) +* Cluster Page Up/Down + Home/End by the right thumb +* Vim-like arrow layout in right bottom row + +* Set media layer toggle to right thumb (Enter) +* Set apostrophe on LCtl (putting it next to some other small + characters) + +L1: +--- + +* Full function key layout +* Teensy button + +L2: +--- + +* Improved media buttons layout (close by the jkl; Vim binding) +* Improved layout of emulated mouse buttons + +LED behaviour to binary+CAPS +============================ + +The ErgoDox LEDs on this layout is using the two rightmost LEDs as the +two LSB in a two digit binary number, representing layer 0, 1, 2 and 3. +The leftmost byte/LED indicates CAPS status. diff --git a/keyboards/ergodox/keymaps/win10_writers-block/config.h b/keyboards/ergodox/keymaps/win10_writers-block/config.h index 43259db088..c6da3dc6ae 100644 --- a/keyboards/ergodox/keymaps/win10_writers-block/config.h +++ b/keyboards/ergodox/keymaps/win10_writers-block/config.h @@ -31,6 +31,9 @@ #ifdef SUBPROJECT_infinity #include "infinity/config.h" #endif +#ifdef SUBPROJECT_ergodone + #include "ergodone/config.h" +#endif #endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */ diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 7327087ffe..3a87606cd0 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,67 +1,22 @@ -# The Easy Way +ErgoDox +== -If you have an ErgoDox EZ, the absolute easiest way for you to customize your firmware is using the [graphical configurator](http://configure.ergodox-ez.com), which uses QMK under the hood. +The ErgoDox is a split ergonomic keyboard originally developed by Dominic "Dox" Beauchamp. -If you can find firmware someone else has made that does what you want, that -is the easiest way to customize your ErgoDox. It requires no programming -experience or the setup of a build environment. +* The **ErgoDox EZ** is a Teensy-based split mechanical keyboard, sold assembled and with warranty at [ErgoDox-EZ.com](https://ergodox-ez.com). +* The **ErgoDox Infinity** is an ARM-based split mechanical keyboard, sold from time to time in kit form at [MassDrop.com](https://www.massdrop.com/buy/infinity-ergodox) -Quickstart: +The ErgoDox EZ code is maintained by Erez Zukerman and is officially supported by the EZ -- the keyboard ships running QMK from the factory. - - Find and download an existing firmware - [from Other Firmware Options](#other-firmware-options) +The ErgoDox Infinity code is maintained by Fredizzimo, as a community contribution. - - Then flash the firmware to your [ErgoDox Ez](#ergodox-ez) - or [ErgoDox Infinity](#ergodox-infinity) +## Standard Build Instructions -# Customizing Keymaps +To build QMK for the ErgoDox, see the official [build guide](/docs/build_guide.md). -There are many existing keymaps in the "keymaps" directory. If you just want -to use one of them, you don't need to modify keymaps and can just build and -flash the firmware as described below. These directories each have a -"readme.md" file which describe them. +## Additional resources -If none of the existing keymaps suit you, you can create your own custom -keymap. This will require some experience with coding. Follow these steps -to customize a keymap: - - - Read the [qmk firmware README](https://github.com/qmk/qmk_firmware) from top to bottom. Then come back here. :) - - - Clone the qmk_firmware repository - - - Set up your build environment (see below). - - - Make a new directory under "keymaps" to hold your customizations. - - - Copy an existing keymap that is close to what you want, such as - "keymaps/default/keymap.c". - - - Use an editor to modify the new "keymap.c". See "Finding the keycodes you - need" below). Try to edit the comments as well, so the "text graphics" - represent your layout correctly. - - - Compile your new firmware (see below) - - - Flash your firmware (see below) - - - Test the changes. - - - Submit your keymap as a pull request to the qmk_firmware repository so - others can use it. You will want to add a "readme.md" that describes the - keymap. - -# Build Dependencies - -Before you can build, you will need the build dependencies. There is a script -to try to do this for Linux: - - - Run the `util/install_dependencies.sh` script as root. - -For the Infinity, you need the chibios submodules to be checked out or you -will receive errors about the build process being unable to find the chibios -files. Check them out with: - - - Go to the top level repo directory and run: `git submodule update --init --recursive` +A graphical configurator for the ErgoDox EZ is available at [configure.ergodox-ez.com](http://configure.ergodox-ez.com). It outputs QMK-compiled binaries, as well as source code for your layout, which you can use as a jumping-off point to further customize in QMK. # Flashing Firmware @@ -145,32 +100,12 @@ You have a few options in how you flash the firmware: any part of the firmware code itself, you can program only the MASTER half. It is safest to program both halves though. -# Contributing your keymap - -The QMK firmware is open-source, so it would be wonderful to have your contribution! Within a very short time after launching we already amassed dozens of user-contributed keymaps, with all sorts of creative improvements and tweaks. This is very valuable for people who aren't comfortable coding, but do want to customize their ErgoDox. To make it easy for these people to use your layout, I recommend submitting your PR in the following format. - -1. All work goes inside your keymap subdirectory (`keymaps/german` in this example). -2. `keymap.c` - this is your actual keymap file; please update the ASCII comments in the file so they correspond with what you did. -3. `readme.md` - a readme file, which GitHub would display by default when people go to your directory. Explain what's different about your keymap, what you tweaked or how it works. No specific format to follow, just communicate what you did. :) -4. Any graphics you wish to add must be hosted elsewhere (please don't include images in your PR). This is absolutely not a must. If you feel like it, you can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to make something and grab a screenshot, but it's really not a must. If you do have graphics, your readme can just embed the graphic as a link (`![alt-text](url)`), just like I did with the default layout. - -# Finding the keycodes you need - -Let's say you want a certain key in your layout to send a colon; to figure out what keycode to use to make it do that, you're going to need `quantum/keymap_common.h`. - -That file contains a big list of all of the special, fancy keys (like, being able to send % on its own and whatnot). - -If you want to send a plain vanilla key, you can look up its code under `doc/keycode.txt`. That's where all the boring keys hang out. - -# Other Firmware Options +## ErgoDone -There are external tools for customizing the layout, but those do not use -the featurs of this qmk firmware. These sites include: +The ErgoDone uses its own HID bootloader and needs to be flashed using the [TKG Toolkit](https://github.com/kairyu/tkg-toolkit). - - The official [ErgoDox EZ configurator](http://configure.ergodox-ez.com) - - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for EZ, works but not officially supported - - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files + - Build the firmware with `make ergodone-keymapname` -You can also find an existing firmware that you like, for example from: + - While plugging in the USB cable, hold the two right-most keys on the left half of the ErgoDone to enter FLASH mode. - - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) + - Use the utility from [TKG Toolkit](https://github.com/kairyu/tkg-toolkit) to flash the keyboard: `hid_bootloader_cli -mmcu=atmega32u4 ergodox_ergodone_keymapname.hex` diff --git a/keyboards/frosty_flake/readme.md b/keyboards/frosty_flake/readme.md index ff440e33b6..762eeab3a2 100644 --- a/keyboards/frosty_flake/readme.md +++ b/keyboards/frosty_flake/readme.md @@ -1,32 +1,16 @@ -frosty_flake keyboard firmware -====================== +Frosty Flake Controller +=== This is the firmware for Rev. 20140521 of the Frosty Flake controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Cooler Master Quick Fire Rapid](http://www.coolermaster.com/peripheral/keyboards/quickfirerapid/). The code was adapted from the [BathroomEpiphanies TMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers), but has been cleaned up to match the [schematic](https://deskthority.net/wiki/File:Frosty_Flake_Schematics.pdf) and gone through some minor refactoring for QMK. -## Quantum MK Firmware +Keyboard Maintainer: QMK Community +Hardware Supported: Frosty Flake +Hardware Availability: https://1upkeyboards.com/qfr-frosty-flake-controller.html -For the full Quantum feature list, see [the parent readme](/). +Make example for this keyboard (after setting up your build environment): -## Building + make frosty_flake-default -Download or clone the whole firmware and navigate to the keyboards/frosty_flake folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` - -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md index bbb0b6e19c..e477b279ce 100644 --- a/keyboards/gh60/readme.md +++ b/keyboards/gh60/readme.md @@ -1,7 +1,23 @@ -## gh60 Rev C keyboard firmware +GH60 +=== ![gh60 Rev C PCB](https://i.imgur.com/FejpoNF.jpg) +A common 60% PCB. + +Keyboard Maintainer: QMK Community +Hardware Supported: GH60 PCB +Hardware Availability: http://blog.komar.be/projects/gh60-programmable-keyboard/ + +Make example for this keyboard (after setting up your build environment): + + make gh60-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + + +## GH60 Hardware Information + /* Column pin configuration * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) @@ -34,29 +50,3 @@ Functions to controls LED clusters gh60_fn_led_off() gh60_esc_led_off() gh60_wasd_leds_off() - -====================== - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme.md](/readme.md). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build with the default keymap, simply run `make default`. - -### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` - -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/gherkin/README.md b/keyboards/gherkin/README.md index 0a3d6fabe0..4d2261829e 100644 --- a/keyboards/gherkin/README.md +++ b/keyboards/gherkin/README.md @@ -1,12 +1,18 @@ +Gherkin +=== -About ------- +A 30 key keyboard. -First pass at adding support for the gherkin keyboard. Compiles but completely -untested. Intended to kick-start development. - -* [Gherkin project on 40% Keyboards](http://www.40percent.club/2016/11/gherkin.html) * [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gherkin) -Credit to JadedC for the initial work. +Keyboard Maintainer: QMK Community +Hardware Supported: Gherkin PCB +Hardware Availability: [Gherkin project on 40% Keyboards](http://www.40percent.club/2016/11/gherkin.html) + +Make example for this keyboard (after setting up your build environment): + make atreus-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +First pass at adding support for the gherkin keyboard. Compiles but completely +untested. Intended to kick-start development. diff --git a/keyboards/gonnerd/keymaps/tkl/Makefile b/keyboards/gonnerd/keymaps/tkl/Makefile new file mode 100644 index 0000000000..5854366f9d --- /dev/null +++ b/keyboards/gonnerd/keymaps/tkl/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/gonnerd/keymaps/tkl/keymap.c b/keyboards/gonnerd/keymaps/tkl/keymap.c new file mode 100644 index 0000000000..b0ba335c59 --- /dev/null +++ b/keyboards/gonnerd/keymaps/tkl/keymap.c @@ -0,0 +1,31 @@ +#include "gonnerd.h" + +#define _x_ KC_NO +#define TRN KC_TRNS + +// Keymap layers +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = KEYMAP_TKL( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, _x_, KC_ENT, \ + KC_LSFT, _x_, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, _x_, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(1), KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT \ + ), + + [1] = KEYMAP_TKL( \ + RESET, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, \ + _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, \ + _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, \ + _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, \ + _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, \ + _x_, _x_, _x_, _x_, _x_, _x_, TRN, _x_, _x_, _x_, _x_ \ + ) + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; diff --git a/keyboards/gonnerd/readme.md b/keyboards/gonnerd/readme.md index 807df308a5..388816abb0 100644 --- a/keyboards/gonnerd/readme.md +++ b/keyboards/gonnerd/readme.md @@ -1,5 +1,17 @@ -GON NerD keyboard firmware -====================== +GON NerD +======== + +A Korean Custom TKL. + +Keyboard Maintainer: QMK Community +Hardware Supported: GON NerD TKL PCB +Hardware Availability: http://www.gonskeyboardworks.com/pcbs-and-controllers/60-nerd-tkl-ver20-pcb.html + +Make example for this keyboard (after setting up your build environment): + + make gonnerd-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. ## Changing Bootloader @@ -14,25 +26,3 @@ not work anymore. You will lose your warranty and official support from GON!_ ## Reset button To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. - -## Building - -Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` - -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/hadron/Makefile b/keyboards/hadron/Makefile new file mode 100644 index 0000000000..e0e1cc6fb6 --- /dev/null +++ b/keyboards/hadron/Makefile @@ -0,0 +1,5 @@ +SUBPROJECT_DEFAULT = ver2 + +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/config.h b/keyboards/hadron/config.h new file mode 100644 index 0000000000..0c19d6c791 --- /dev/null +++ b/keyboards/hadron/config.h @@ -0,0 +1,83 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define MANUFACTURER ishtob +#define PRODUCT Hadron Keyboard +#define DESCRIPTION A cherry ML ortholinear keyboard + + + + +//#define AUDIO_VOICES + +//#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION +#ifdef SUBPROJECT_ver0 + #include "ver0/config.h" +#endif +#ifdef SUBPROJECT_ver2 + #include "ver2/config.h" +#endif + +#endif diff --git a/keyboards/hadron/hadron.c b/keyboards/hadron/hadron.c new file mode 100644 index 0000000000..ca5b20e894 --- /dev/null +++ b/keyboards/hadron/hadron.c @@ -0,0 +1,26 @@ +#include "hadron.h" + + +void matrix_init_kb(void) { + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +}
\ No newline at end of file diff --git a/keyboards/hadron/hadron.h b/keyboards/hadron/hadron.h new file mode 100644 index 0000000000..fceae50d9a --- /dev/null +++ b/keyboards/hadron/hadron.h @@ -0,0 +1,30 @@ +#ifndef HADRON_H +#define HADRON_H + +#ifdef SUBPROJECT_ver0 + #include "ver0.h" +#endif +#ifdef SUBPROJECT_ver2 + #include "ver2.h" +#endif + +#include "quantum.h" + + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E \ + ) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, KC_NO, KC_NO, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E } \ +} + + +#endif diff --git a/keyboards/hadron/i2c.c b/keyboards/hadron/i2c.c new file mode 100644 index 0000000000..cd2b835d50 --- /dev/null +++ b/keyboards/hadron/i2c.c @@ -0,0 +1,166 @@ +#include <util/twi.h> +#include <avr/io.h> +#include <stdlib.h> +#include <avr/interrupt.h> +#include <util/twi.h> +#include <stdbool.h> +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) + lim++; + + // easier way, but will wait slightly longer + // _delay_us(100); +} + +// Setup twi to run at 100kHz +void i2c_master_init(void) { + // no prescaler + TWSR = 0; + // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + + i2c_delay(); + + // check that we started successfully + if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) + return 1; + + // send device address + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) + return 1; // slave did not acknowledge + else + return 0; // success +} + + +// Finish the i2c transaction. +void i2c_master_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + uint16_t lim = 0; + while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) + lim++; +} + +// Write one byte to the i2c slave. +// returns 0 => slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + // check if the slave acknowledged us + return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; +} + +// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, +// if ack=0 the acknowledge bit is not set. +// returns: byte read from i2c device +uint8_t i2c_master_read(int ack) { + TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); + + i2c_delay(); + return TWDR; +} + +void i2c_reset_state(void) { + TWCR = 0; +} + +void i2c_slave_init(uint8_t address) { + TWAR = address << 0; // slave i2c address + // TWEN - twi enable + // TWEA - enable address acknowledgement + // TWINT - twi interrupt flag + // TWIE - enable the twi interrupt + TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); +} + +ISR(TWI_vect); + +ISR(TWI_vect) { + uint8_t ack = 1; + switch(TW_STATUS) { + case TW_SR_SLA_ACK: + // this device has been addressed as a slave receiver + slave_has_register_set = false; + break; + + case TW_SR_DATA_ACK: + // this device has received data as a slave receiver + // The first byte that we receive in this transaction sets the location + // of the read/write location of the slaves memory that it exposes over + // i2c. After that, bytes will be written at slave_buffer_pos, incrementing + // slave_buffer_pos after each write. + if(!slave_has_register_set) { + slave_buffer_pos = TWDR; + // don't acknowledge the master if this memory loctaion is out of bounds + if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); +} + + + +#endif diff --git a/keyboards/hadron/i2c.h b/keyboards/hadron/i2c.h new file mode 100644 index 0000000000..2bd7f40968 --- /dev/null +++ b/keyboards/hadron/i2c.h @@ -0,0 +1,49 @@ +#ifndef I2C_H +#define I2C_H + +#include <stdint.h> + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 800000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + +#endif diff --git a/keyboards/hadron/keymaps/default/Makefile b/keyboards/hadron/keymaps/default/Makefile new file mode 100644 index 0000000000..e24ba04b53 --- /dev/null +++ b/keyboards/hadron/keymaps/default/Makefile @@ -0,0 +1,26 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +ONEHAND_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/keymaps/default/config.h b/keyboards/hadron/keymaps/default/config.h new file mode 100644 index 0000000000..0f349ad932 --- /dev/null +++ b/keyboards/hadron/keymaps/default/config.h @@ -0,0 +1,21 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define LEADER_TIMEOUT 300 +//#define BACKLIGHT_BREATHING +#define PREVENT_STUCK_MODIFIERS + +#define USE_I2C +#define SSD1306OLED +#define OLED_ROTATE180 + +/* ws2812 RGB LED*/ +#define RGB_DI_PIN D4 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + +#endif diff --git a/keyboards/hadron/keymaps/default/keymap.c b/keyboards/hadron/keymaps/default/keymap.c new file mode 100644 index 0000000000..01cc8abab7 --- /dev/null +++ b/keyboards/hadron/keymaps/default/keymap.c @@ -0,0 +1,496 @@ +#include "hadron.h" +#include "bootloader.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "LUFA/Drivers/Peripheral/TWI.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#ifdef USE_I2C +#include "i2c.h" +#endif +#ifdef SSD1306OLED +#include "ssd1306.h" +#endif +extern keymap_config_t keymap_config; + +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _MOUSECURSOR 8 +#define _ADJUST 16 + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +enum macro_keycodes { + KC_DEMOMACRO, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define CTL_TTAB CTL_T(KC_TAB) // Tap for Esc, hold for Ctrl +#define CTL_ENT CTL_T(KC_ENT) // Tap for Enter, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +// Requires KC_TRNS/_______ for the trigger key in the destination layer +#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor +#define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise +#define DEMOMACRO M(KC_DEMOMACRO) // Sample for macros + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | DEL | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | Q | W | E | R | T | 7 | 8 | 9 | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | A | S | D | F | G | 4 | 5 | 6 | H | J | K | L | ;/Nav| ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | 1 | 2 | 3 | N | M | , | . | / |Ctl/Et| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right | + * `--------------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_P7, KC_P8, KC_P9, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_P4, KC_P5, KC_P6, KC_H, KC_J, KC_K, KC_L,LT_MC(KC_SCLN), KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, CTL_ENT, \ + KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT,KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Colemak + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | Q | W | F | P | G | 7 | 8 | 9 | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | CAPS | A | R | S | T | D | 4 | 5 | 6 | H | N | E | I | O | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | 1 | 2 | 3 | K | M | , | . | / |Ctl/Et| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right | + * `--------------------------------------------------------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_P7, KC_P8, KC_P9, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_LCTRL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_P4, KC_P5, KC_P6, KC_H, KC_N, KC_E, KC_I, LT_MC(KC_O), KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, CTL_ENT, \ + KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + +/* Dvorak + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | " | , | . | P | Y | 7 | 8 | 9 | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | Esc | A | O | E | U | I | 4 | 5 | 6 | D | H | T | N | S | / | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | 1 | 2 | 3 | B | M | W | V | Z |Ctl/Et| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right | + * `--------------------------------------------------------------------------------------------------------' + */ +[_DVORAK] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_P7, KC_P8, KC_P9, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_P4, KC_P5, KC_P6, KC_D, KC_H, KC_T, KC_N, LT_MC(KC_S), KC_SLSH, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_P1, KC_P2, KC_P3, KC_B, KC_M, KC_W, KC_V, KC_Z, CTL_ENT, \ + KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Lower + * ,------+------+------+------+------+------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | ~ | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | | F12 |ISO ~ |ISO | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `--------------------------------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | | | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | | F12 |ISO # |ISO / | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `--------------------------------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Mouse Layer (semi-col) + * ,------+------+------+------+------+------------------------------------------------. + * | ACCL0| ACCL1| ACCL2| | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | | | | | | | | Home | Wh_Up| WHL_L| M_Up | WHL_R| Macro| | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | End | Wh_Dn| M_Lft| M_Dn | M_Rt | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | BTN2 | BTN3 | BTN4 | BTN5 | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | BTN1 | | | | BTN1 | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ + +[_MOUSECURSOR] = KEYMAP( + KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R,DEMOMACRO,_______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, \ + _______, _______, _______, _______, _______, KC_BTN1, _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______ \ +), + +/* Adjust (Lower + Raise) + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \ + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______\ +) + + + +}; + + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +// define variables for reactive RGB +bool RGB_INIT = false; +bool TOG_STATUS = false; +int RGB_current_mode; + + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + rgblight_mode(RGB_current_mode); + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(16); + } + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + TOG_STATUS = false; + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(15); + } + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + layer_off(_RAISE); + TOG_STATUS = false; + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case RGB_MOD: + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef USE_I2C + i2c_master_init(); + #ifdef SSD1306OLED + // calls code for the SSD1306 OLED + _delay_ms(400); + TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); + iota_gfx_init(); // turns on the display + #endif + #endif + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +void matrix_scan_user(void) { + #ifdef SSD1306OLED + iota_gfx_task(); // this is what updates the display continuously + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{cc + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + switch (id) { + case KC_DEMOMACRO: + if (record->event.pressed){ + return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END); + } + } + + return MACRO_NONE; +} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_LOWER 8 +#define L_RAISE 16 +#define L_FNLAYER 64 +#define L_NUMLAY 128 +#define L_NLOWER 136 +#define L_NFNLAYER 192 +#define L_MOUSECURSOR 256 +#define L_ADJUST 65560 + +void iota_gfx_task_user(void) { +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + struct CharacterMatrix matrix; + + matrix_clear(&matrix); + matrix_write_P(&matrix, PSTR("USB: ")); +#ifdef PROTOCOL_LUFA + switch (USB_DeviceState) { + case DEVICE_STATE_Unattached: + matrix_write_P(&matrix, PSTR("Unattached")); + break; + case DEVICE_STATE_Suspended: + matrix_write_P(&matrix, PSTR("Suspended")); + break; + case DEVICE_STATE_Configured: + matrix_write_P(&matrix, PSTR("Connected")); + break; + case DEVICE_STATE_Powered: + matrix_write_P(&matrix, PSTR("Powered")); + break; + case DEVICE_STATE_Default: + matrix_write_P(&matrix, PSTR("Default")); + break; + case DEVICE_STATE_Addressed: + matrix_write_P(&matrix, PSTR("Addressed")); + break; + default: + matrix_write_P(&matrix, PSTR("Invalid")); + } +#endif + +// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(&matrix, PSTR("\n\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(&matrix, PSTR("Default")); + break; + case L_RAISE: + matrix_write_P(&matrix, PSTR("Raise")); + break; + case L_LOWER: + matrix_write_P(&matrix, PSTR("Lower")); + break; + case L_ADJUST: + matrix_write_P(&matrix, PSTR("ADJUST")); + break; + default: + matrix_write(&matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(&matrix, led); + matrix_update(&display, &matrix); +} + diff --git a/keyboards/hadron/keymaps/default/readme.md b/keyboards/hadron/keymaps/default/readme.md new file mode 100644 index 0000000000..de9680b498 --- /dev/null +++ b/keyboards/hadron/keymaps/default/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/keyboards/hadron/keymaps/readme.md b/keyboards/hadron/keymaps/readme.md new file mode 100644 index 0000000000..54fb5f6d9e --- /dev/null +++ b/keyboards/hadron/keymaps/readme.md @@ -0,0 +1,23 @@ +# How to add your own keymap + +Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: + + _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] + +\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements + +and contain the following files: + +* `keymap.c` +* `readme.md` *recommended* +* `config.h` *optional*, found automatically when compiling +* `Makefile` *optional*, found automatically when compling + +When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: + + * **folder_name** description + +# List of Planck keymaps + +* **default** default Planck layout +* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file diff --git a/keyboards/hadron/keymaps/side_numpad/Makefile b/keyboards/hadron/keymaps/side_numpad/Makefile new file mode 100644 index 0000000000..5cdc186cd6 --- /dev/null +++ b/keyboards/hadron/keymaps/side_numpad/Makefile @@ -0,0 +1,26 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = yes # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +ONEHAND_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/keymaps/side_numpad/config.h b/keyboards/hadron/keymaps/side_numpad/config.h new file mode 100644 index 0000000000..0f349ad932 --- /dev/null +++ b/keyboards/hadron/keymaps/side_numpad/config.h @@ -0,0 +1,21 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define LEADER_TIMEOUT 300 +//#define BACKLIGHT_BREATHING +#define PREVENT_STUCK_MODIFIERS + +#define USE_I2C +#define SSD1306OLED +#define OLED_ROTATE180 + +/* ws2812 RGB LED*/ +#define RGB_DI_PIN D4 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + +#endif diff --git a/keyboards/hadron/keymaps/side_numpad/keymap.c b/keyboards/hadron/keymaps/side_numpad/keymap.c new file mode 100644 index 0000000000..a5ccfd0222 --- /dev/null +++ b/keyboards/hadron/keymaps/side_numpad/keymap.c @@ -0,0 +1,505 @@ +#include "hadron.h" +#include "bootloader.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "LUFA/Drivers/Peripheral/TWI.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#ifdef USE_I2C +#include "i2c.h" +#endif +#ifdef SSD1306OLED +#include "ssd1306.h" +#endif +extern keymap_config_t keymap_config; + +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 3 +#define _RAISE 4 +#define _FNLAYER 6 +#define _NUMLAY 7 +#define _MOUSECURSOR 8 +#define _ADJUST 16 + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +enum macro_keycodes { + KC_DEMOMACRO, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define CTL_TTAB CTL_T(KC_TAB) // Tap for Esc, hold for Ctrl +#define CTL_ENT CTL_T(KC_ENT) // Tap for Enter, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +// Requires KC_TRNS/_______ for the trigger key in the destination layer +#define LT_FN(kc) LT(_FNLAYER, kc) // L-ayer T-ap Function Layer +#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor +#define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise +#define TG_NUMLAY TG(_NUMLAY) //Toggle for layer _NUMLAY +#define DEMOMACRO M(KC_DEMOMACRO) // My login macros + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | 7 | 8 | 9 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | A | S | D | F | G | H | J | K | L | ; |Enter | 4 | 5 | 6 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / | = | 1 | 2 | 3 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ~ | Ctrl | Alt | GUI |Lower |Space |Space |Raise | RAlt | Ins | Del |NumLay| 0 | . | ENT | + * `--------------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_P7, KC_P8, KC_P9, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT_MC(KC_SCLN), CTL_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_EQL, KC_P1, KC_P2, KC_P3, \ + KC_GRV, KC_RCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_RALT, KC_INS, KC_DEL, TG_NUMLAY, KC_P0, KC_PDOT, KC_PENT \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ~ | \ | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | CAPS | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | [ | ] | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, KC_BSLS, _______, _______, _______, \ + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, KC_PIPE, _______, _______, _______, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______\ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ~ | \ | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | | A | Up | D | PrSc | | 4 | 5 | 6 | * | : | ' | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | Lt | Dn | Rt | Mute | | 1 | 2 | 3 | Up | / | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | |Space | 0 | | Left | Down | Right| | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PLUS, KC_BSLS, _______, _______, _______, \ + _______, KC_A, KC_UP, KC_D, KC_PSCR, _______, KC_4, KC_5, KC_6, KC_PAST, KC_COLN, KC_QUOT, _______, _______, _______, \ + _______, KC_LEFT, KC_DOWN, KC_RIGHT, KC__MUTE, _______, KC_1, KC_2, KC_3, KC_UP, KC_SLSH, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_SPC, KC_0, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______ \ +), + +/* FN layer on Esc key + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | + | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | [ | ] | ' | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | { | } | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_FNLAYER] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS, _______, _______, _______, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, KC_QUOT, _______, _______, _______, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______ \ +), + +/* Num Layer + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | | | | | | | | | | | | F7 | F8 | F9 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | F4 | F5 | F6 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | Up | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Exit | Left | Down | Rght | + * `--------------------------------------------------------------------------------------------------------' + */ +[_NUMLAY] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, KC_END, KC_PGDN, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PMNS, KC_UP, KC_PPLS, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT \ +), + +/* Mouse Layer (semi-col) + * ,-----------------------------------------------------------------------------------. + * | |ACCL0| ACCL1| ACCL2 | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | | | | | Home | Wh_Up| WHL_L| M_Up | WHL_R| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | End | Wh_Dn| M_Lft| M_Dn | M_Rt | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | BTN2 | BTN3 | BTN4 | BTN5 | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | BTN1 | | | | BTN1 | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ + +[_MOUSECURSOR] = KEYMAP( + _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______,\ + _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R, DEMOMACRO, _______, _______, _______, _______, \ + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, _______, \ + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* Adjust (Lower + Raise) + + * ,-----------------------------------------------------------------------------------. + * | Reset| | | | | | | | | VolD | VolU | Mute | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | Del | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | BL + |BL ST |BLSTEP| BL TG| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, \ + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_DEL, _______, _______, _______, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, _______, _______, _______, _______, _______, \ + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + + + +}; + + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +// define variables for reactive RGB +bool RGB_INIT = false; +bool TOG_STATUS = false; +bool NUMLAY_STATUS = false; +int RGB_current_mode; + + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + rgblight_mode(RGB_current_mode); + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(16); + } + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + TOG_STATUS = false; + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(15); + } + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + layer_off(_RAISE); + TOG_STATUS = false; + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + //my attempt for RGB layer lock indication via changing the mode, still have to figure out how to not have other keypress not override this mode + case TG_NUMLAY: + if (record->event.pressed) { + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + NUMLAY_STATUS = !NUMLAY_STATUS; + if (NUMLAY_STATUS) { + rgblight_mode(4); + layer_on(_NUMLAY); + } else { + rgblight_mode(RGB_current_mode); + layer_off(_NUMLAY); } + } + return false; + break; + case RGB_MOD: + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef USE_I2C + i2c_master_init(); + #ifdef SSD1306OLED + // calls code for the SSD1306 OLED + _delay_ms(400); + TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); + iota_gfx_init(); // turns on the display + #endif + #endif + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +void matrix_scan_user(void) { + #ifdef SSD1306OLED + iota_gfx_task(); // this is what updates the display continuously + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{cc + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + switch (id) { + case KC_DEMOMACRO: + if (record->event.pressed){ + return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END); + } + } + + return MACRO_NONE; +} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_LOWER 8 +#define L_RAISE 16 +#define L_FNLAYER 64 +#define L_NUMLAY 128 +#define L_NLOWER 136 +#define L_NFNLAYER 192 +#define L_MOUSECURSOR 256 +#define L_ADJUST 65560 + +void iota_gfx_task_user(void) { +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + struct CharacterMatrix matrix; + + matrix_clear(&matrix); + matrix_write_P(&matrix, PSTR("USB: ")); +#ifdef PROTOCOL_LUFA + switch (USB_DeviceState) { + case DEVICE_STATE_Unattached: + matrix_write_P(&matrix, PSTR("Unattached")); + break; + case DEVICE_STATE_Suspended: + matrix_write_P(&matrix, PSTR("Suspended")); + break; + case DEVICE_STATE_Configured: + matrix_write_P(&matrix, PSTR("Connected")); + break; + case DEVICE_STATE_Powered: + matrix_write_P(&matrix, PSTR("Powered")); + break; + case DEVICE_STATE_Default: + matrix_write_P(&matrix, PSTR("Default")); + break; + case DEVICE_STATE_Addressed: + matrix_write_P(&matrix, PSTR("Addressed")); + break; + default: + matrix_write_P(&matrix, PSTR("Invalid")); + } +#endif + +// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(&matrix, PSTR("\n\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(&matrix, PSTR("Default")); + break; + case L_RAISE: + matrix_write_P(&matrix, PSTR("Raise")); + break; + case L_LOWER: + matrix_write_P(&matrix, PSTR("Lower")); + break; + case L_ADJUST: + matrix_write_P(&matrix, PSTR("ADJUST")); + break; + default: + matrix_write(&matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(&matrix, led); + matrix_update(&display, &matrix); +} diff --git a/keyboards/hadron/keymaps/side_numpad/readme.md b/keyboards/hadron/keymaps/side_numpad/readme.md new file mode 100644 index 0000000000..de9680b498 --- /dev/null +++ b/keyboards/hadron/keymaps/side_numpad/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/keyboards/hadron/out.txt b/keyboards/hadron/out.txt new file mode 100644 index 0000000000..644a6a7774 --- /dev/null +++ b/keyboards/hadron/out.txt @@ -0,0 +1,66 @@ +-------- begin -------- +avr-gcc.exe (AVR_8_bit_GNU_Toolchain_3.5.0_1662) 4.9.2 +Copyright (C) 2014 Free Software Foundation, Inc. +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +Compiling: ../../keyboards/planck/planck.c [32;01m[OK][0m +Compiling: ../../keyboards/planck/keymaps/experimental/keymap.c [33;01m[WARNINGS][0m + | + | ../../keyboards/planck/keymaps/experimental/keymap.c: In function 'action_get_macro': + | ../../keyboards/planck/keymaps/experimental/keymap.c:227:17: warning: implicit declaration of function 'breathing_speed_set' [-Wimplicit-function-declaration] + | breathing_speed_set(2); + | ^ + | ../../keyboards/planck/keymaps/experimental/keymap.c:228:17: warning: implicit declaration of function 'breathing_pulse' [-Wimplicit-function-declaration] + | breathing_pulse(); + | ^ + | +Compiling: ../../quantum/quantum.c [32;01m[OK][0m +Compiling: ../../quantum/keymap.c [32;01m[OK][0m +Compiling: ../../quantum/keycode_config.c [32;01m[OK][0m +Compiling: ../../quantum/matrix.c [32;01m[OK][0m +Compiling: ../../quantum/audio/audio.c [32;01m[OK][0m +Compiling: ../../quantum/audio/voices.c [32;01m[OK][0m +Compiling: ../../quantum/audio/luts.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/lufa.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/descriptor.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/HIDParser.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/ConfigDescriptors.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/DeviceStandardReq.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/HostStandardReq.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBTask.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/host.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/keyboard.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_tapping.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_macro.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_layer.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_util.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/print.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/debug.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/util.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/suspend.c [32;01m[OK][0m +Assembling: ../../tmk_core/common/avr/xprintf.S [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/timer.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/bootloader.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/magic.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/eeconfig.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/mousekey.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/command.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/backlight.c [32;01m[OK][0m +Linking: .build/planck_experimental.elf [31;01m[ERRORS][0m + | + | .build/obj_planck_experimental/keyboards/planck/keymaps/experimental/keymap.o: In function `action_get_macro': + | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:240: undefined reference to `breathing_speed_set' + | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:241: undefined reference to `breathing_pulse' + | collect2.exe: error: ld returned 1 exit status + | diff --git a/keyboards/hadron/readme.md b/keyboards/hadron/readme.md new file mode 100644 index 0000000000..8b13789179 --- /dev/null +++ b/keyboards/hadron/readme.md @@ -0,0 +1 @@ + diff --git a/keyboards/hadron/rules.mk b/keyboards/hadron/rules.mk new file mode 100644 index 0000000000..78f86f982d --- /dev/null +++ b/keyboards/hadron/rules.mk @@ -0,0 +1,72 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. +API_SYSEX_ENABLE = yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +SRC = i2c.c \ + ssd1306.c + diff --git a/keyboards/hadron/ver0/Makefile b/keyboards/hadron/ver0/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/hadron/ver0/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/ver0/config.h b/keyboards/hadron/ver0/config.h new file mode 100644 index 0000000000..039d4f1c71 --- /dev/null +++ b/keyboards/hadron/ver0/config.h @@ -0,0 +1,35 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef VER0_CONFIG_H +#define VER0_CONFIG_H + +#include "../config.h" + +/* USB Device descriptor parameter */ +#define DEVICE_VER 0x0001 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* Hadron Ver0 PCB default pin-out */ +#define MATRIX_ROW_PINS { D7, E6, B4, B5, B6 } +#define MATRIX_COL_PINS { F6, F7, C6, C7, F5, F4, F1, F0, D2, D3, D5, B3, B2, B1, B0 } +#define UNUSED_PINS + + +#endif diff --git a/keyboards/hadron/ver0/rules.mk b/keyboards/hadron/ver0/rules.mk new file mode 100644 index 0000000000..0f9667a8ae --- /dev/null +++ b/keyboards/hadron/ver0/rules.mk @@ -0,0 +1,5 @@ +#AUDIO_ENABLE ?= yes # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/ver0/ver0.c b/keyboards/hadron/ver0/ver0.c new file mode 100644 index 0000000000..acb3a9105f --- /dev/null +++ b/keyboards/hadron/ver0/ver0.c @@ -0,0 +1 @@ +#include "ver0.h"
\ No newline at end of file diff --git a/keyboards/hadron/ver0/ver0.h b/keyboards/hadron/ver0/ver0.h new file mode 100644 index 0000000000..5710af322e --- /dev/null +++ b/keyboards/hadron/ver0/ver0.h @@ -0,0 +1,6 @@ +#ifndef VER0_H +#define VER0_H + +#include "../hadron.h" + +#endif
\ No newline at end of file diff --git a/keyboards/hadron/ver2/Makefile b/keyboards/hadron/ver2/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/hadron/ver2/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/ver2/config.h b/keyboards/hadron/ver2/config.h new file mode 100644 index 0000000000..71a0ab5b3f --- /dev/null +++ b/keyboards/hadron/ver2/config.h @@ -0,0 +1,35 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef VER2_CONFIG_H +#define VER2_CONFIG_H + +#include "../config.h" + +/* USB Device descriptor parameter */ +#define DEVICE_VER 0x0002 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* Hadron Ver0 PCB default pin-out */ +#define MATRIX_ROW_PINS { D7, E6, B4, B5, B6 } +#define MATRIX_COL_PINS { F6, F7, D6, C7, F5, F4, F1, F0, D2, D3, D5, B3, B2, B1, B0 } +#define UNUSED_PINS + + +#endif diff --git a/keyboards/hadron/ver2/rules.mk b/keyboards/hadron/ver2/rules.mk new file mode 100644 index 0000000000..0f9667a8ae --- /dev/null +++ b/keyboards/hadron/ver2/rules.mk @@ -0,0 +1,5 @@ +#AUDIO_ENABLE ?= yes # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/ver2/ver2.c b/keyboards/hadron/ver2/ver2.c new file mode 100644 index 0000000000..bc0917746a --- /dev/null +++ b/keyboards/hadron/ver2/ver2.c @@ -0,0 +1 @@ +#include "ver2.h"
\ No newline at end of file diff --git a/keyboards/hadron/ver2/ver2.h b/keyboards/hadron/ver2/ver2.h new file mode 100644 index 0000000000..54e141ffac --- /dev/null +++ b/keyboards/hadron/ver2/ver2.h @@ -0,0 +1,6 @@ +#ifndef VER2_H +#define VER2_H + +#include "../hadron.h" + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/atreus50/rules.mk b/keyboards/handwired/atreus50/rules.mk index 5e808dfa7f..2e2d48f6ab 100644 --- a/keyboards/handwired/atreus50/rules.mk +++ b/keyboards/handwired/atreus50/rules.mk @@ -67,15 +67,3 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [[ -z $$USB ]]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/handwired/magicforce61/rules.mk b/keyboards/handwired/magicforce61/rules.mk index 913bcb93e2..a3fdd3d707 100644 --- a/keyboards/handwired/magicforce61/rules.mk +++ b/keyboards/handwired/magicforce61/rules.mk @@ -69,15 +69,3 @@ AUDIO_ENABLE ?= no # Audio output on port C6 ifndef QUANTUM_DIR include ../../../Makefile endif - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [[ -z $$USB ]]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/handwired/magicforce68/README.md b/keyboards/handwired/magicforce68/README.md index 2877169ef4..a0de66069d 100644 --- a/keyboards/handwired/magicforce68/README.md +++ b/keyboards/handwired/magicforce68/README.md @@ -5,7 +5,7 @@ This firmware is for a Magicforce 68 that's had its PCB removed and is handwired ## Wiring Layout -![Wiring Layout](http://imgur.com/NmTCv5u) +![Wiring Layout](http://i.imgur.com/NmTCv5u.png) ## Pinout diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk index 0e07bde403..0d21623ced 100644 --- a/keyboards/handwired/magicforce68/rules.mk +++ b/keyboards/handwired/magicforce68/rules.mk @@ -69,15 +69,3 @@ AUDIO_ENABLE = no # Audio output on port C6 ifndef QUANTUM_DIR include ../../../Makefile endif - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [[ -z $$USB ]]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk index 0e07bde403..0d21623ced 100644 --- a/keyboards/handwired/numpad20/rules.mk +++ b/keyboards/handwired/numpad20/rules.mk @@ -69,15 +69,3 @@ AUDIO_ENABLE = no # Audio output on port C6 ifndef QUANTUM_DIR include ../../../Makefile endif - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [[ -z $$USB ]]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/handwired/ortho5x13/rules.mk b/keyboards/handwired/ortho5x13/rules.mk index 0e07bde403..0d21623ced 100644 --- a/keyboards/handwired/ortho5x13/rules.mk +++ b/keyboards/handwired/ortho5x13/rules.mk @@ -69,15 +69,3 @@ AUDIO_ENABLE = no # Audio output on port C6 ifndef QUANTUM_DIR include ../../../Makefile endif - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [[ -z $$USB ]]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index efb9ebdd74..ea5f2b76e8 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -161,7 +161,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ___ KC_NO -#define KEYMAP( \ +#define KEYMAP_CUSTOM( \ k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c index 763fa5a27a..e229b67e54 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c +++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c @@ -686,7 +686,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | Ctrl | Alt | GUI | Punc | Num | Space | Fun |Greek | GUI |AltGr | Ctrl | * `-----------------------------------------------------------------------------------' */ -[_QWERTY] = KEYMAP( +[_QWERTY] = KEYMAP_CUSTOM( KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT , KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, @@ -706,7 +706,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ #ifdef LAYOUT_DVORAK -[_DVORAK] = KEYMAP( +[_DVORAK] = KEYMAP_CUSTOM( _______, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, _______, _______, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, _______, _______, KC_SLSH, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, _______, @@ -728,7 +728,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ #ifdef LAYOUT_COLEMAK -[_COLEMAK] = KEYMAP( +[_COLEMAK] = KEYMAP_CUSTOM( _______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, _______, _______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, _______, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, @@ -750,7 +750,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ #ifdef LAYOUT_NORMAN -[_NORMAN] = KEYMAP( +[_NORMAN] = KEYMAP_CUSTOM( _______, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_J, KC_U, KC_R, KC_L, KC_QUOT, _______, _______, KC_A, KC_S, KC_E, KC_T, KC_G, KC_Y, KC_N, KC_I, KC_O, KC_H, _______, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, @@ -772,7 +772,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ #ifdef LAYOUT_WORKMAN -[_WORKMAN] = KEYMAP( +[_WORKMAN] = KEYMAP_CUSTOM( _______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, _______, _______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, _______, _______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______, @@ -792,7 +792,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | : | | * `-----------------------------------------------------------------------------------' */ -[_PUNC] = KEYMAP( +[_PUNC] = KEYMAP_CUSTOM( KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, X(LTEQ), X(GTEQ), _______, KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, X(NOTEQ),KC_LPRN, KC_RPRN, KC_LABK, KC_RABK, _______, KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, X(PLMIN),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______, @@ -811,7 +811,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | x | | | | | 0 | , | . | : | | * `-----------------------------------------------------------------------------------' */ -[_NUM] = KEYMAP( +[_NUM] = KEYMAP_CUSTOM( KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, S(KC_A), KC_1, KC_2, KC_3, S(KC_D), _______, KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, S(KC_B), KC_4, KC_5, KC_6, S(KC_E), _______, KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, S(KC_C), KC_7, KC_8, KC_9, S(KC_F), _______, @@ -830,7 +830,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_FUN] = KEYMAP( +[_FUN] = KEYMAP_CUSTOM( XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_INS, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL, KC_CAPS, KC_F5, KC_F6, KC_F7, KC_F8, KC_PSCR, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, KC_F9, KC_F10, KC_F11, KC_F12, KC_PAUS, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______, @@ -849,7 +849,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_GREEKU] = KEYMAP( +[_GREEKU] = KEYMAP_CUSTOM( _______, XXXXXXX, XXXXXXX,X(UEPSI), X(URHO), X(UTAU),X(UUPSI),X(UTHET),X(UIOTA),X(UOMIC), X(UPI), _______, _______,X(UALPH),X(USIGM),X(UDELT), X(UPHI),X(UGAMM), X(UETA), X(UXI),X(UKAPP),X(ULAMB), KC_QUOT, _______, _______,X(UZETA), X(UCHI), X(UPSI),X(UOMEG),X(UBETA), X(UNU), X(UMU), KC_COMM, KC_DOT, KC_SLSH, _______, @@ -868,7 +868,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_GREEKL] = KEYMAP( +[_GREEKL] = KEYMAP_CUSTOM( _______, XXXXXXX,X(FSIGM),X(LEPSI), X(LRHO), X(LTAU),X(LUPSI),X(LTHET),X(LIOTA),X(LOMIC), X(LPI), _______, _______,X(LALPH),X(LSIGM),X(LDELT), X(LPHI),X(LGAMM), X(LETA), X(LXI),X(LKAPP),X(LLAMB), KC_QUOT, _______, _______,X(LZETA), X(LCHI), X(LPSI),X(LOMEG),X(LBETA), X(LNU), X(LMU), KC_COMM, KC_DOT, KC_SLSH, _______, @@ -887,7 +887,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_EMPTY] = KEYMAP( +[_EMPTY] = KEYMAP_CUSTOM( XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, @@ -906,7 +906,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_EMOJI] = KEYMAP( +[_EMOJI] = KEYMAP_CUSTOM( X(HART2), X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY),X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV), X(PHEW), X(THMUP), X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN),X(HEART), X(BYE), X(KISS),X(CELEB), X(COOL),X(NOEVS), X(THMDN),X(SLEEP), X(CLAP), X(CRY), X(VIC),X(BHART), X(SUN),X(SMEYE), X(WINK), X(MOON),X(CONFU),X(NOEVH), @@ -925,7 +925,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_GUI] = KEYMAP( +[_GUI] = KEYMAP_CUSTOM( XXXXXXX, G(KC_1), G(KC_2), G(KC_3), G(KC_4), G(KC_5), G(KC_6), G(KC_7), G(KC_8), G(KC_9), G(KC_0), XXXXXXX, KC_ESC, XXXXXXX, S(KC_TAB),KC_ESC, KC_TAB, XXXXXXX, XXXXXXX, KC_WWWB, XXXXXXX, KC_WWWF, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD, KC_MUTE, KC_VOLU, KC_SPC, KC_SPC, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, @@ -944,7 +944,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_SYS] = KEYMAP( +[_SYS] = KEYMAP_CUSTOM( DEBUG, QWERTY, WIN, XXXXXXX, RESET, XXXXXXX, XXXXXXX, OUT_USB, XXXXXXX, XXXXXXX, XXXXXXX, RGBDEMO, XXXXXXX, FC_TOG, XXXXXXX, DVORAK, XXXXXXX, GLOW, XXXXXXX, XXXXXXX, WORKMAN, LINUX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, COLEMAK, XXXXXXX, OUT_BT, NORMAN, OSX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, diff --git a/keyboards/handwired/promethium/rgbsps.c b/keyboards/handwired/promethium/rgbsps.c index f30badd356..84fac1ae1f 100644 --- a/keyboards/handwired/promethium/rgbsps.c +++ b/keyboards/handwired/promethium/rgbsps.c @@ -1,4 +1,4 @@ -#include "light_ws2812.h" +#include "ws2812.h" #include "rgbsps.h" struct cRGB led[RGBSPS_NUM]; diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk index 6fa45b42b6..69903dcebe 100644 --- a/keyboards/handwired/promethium/rules.mk +++ b/keyboards/handwired/promethium/rules.mk @@ -72,7 +72,7 @@ BLUETOOTH = AdafruitBLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -SRC += $(QUANTUM_DIR)/light_ws2812.c +SRC += ws2812.c SRC += rgbsps.c -SRC += $(QUANTUM_DIR)/analog.c +SRC += analog.c SRC += matrix.c diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md index ee7d11121c..fe4402a04f 100644 --- a/keyboards/hhkb/readme.md +++ b/keyboards/hhkb/readme.md @@ -1,182 +1,14 @@ -hhkb_qmk keyboard firmware -====================== +HHKB Alternate Controller +=== -## Quantum MK Firmware +An alternative controler for the HHKB designed by hasu. -You have access to a bunch of goodies! Check out the Makefile to enable/disable some of the features. Uncomment the `#` to enable them. Setting them to `no` does nothing and will only confuse future you. +Keyboard Maintainer: QMK Community +Hardware Supported: HHKB Alternate Controller +Hardware Availability: https://geekhack.org/index.php?topic=12047.0 - BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality - MIDI_ENABLE = yes # MIDI controls - # UNICODE_ENABLE = yes # Unicode support - this is commented out, just as an example. You have to use #, not // - BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID +Make example for this keyboard (after setting up your build environment): -## Quick aliases to common actions + make hhkb-default -Your keymap can include shortcuts to common operations (called "function actions" in tmk). - -### Switching and toggling layers - -`MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer. When you apply this to a key, that same key must be set as `KC_TRNS` on the destination layer. Otherwise, you won't make it back to the original layer when you release the key (and you'll get a keycode sent). You can only switch to layers *above* your current layer. If you're on layer 0 and you use `MO(1)`, that will switch to layer 1 just fine. But if you include `MO(3)` on layer 5, that won't do anything for you -- because layer 3 is lower than layer 5 on the stack. - -`LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped. Like `MO()`, this only works upwards in the layer stack (`layer` must be higher than the current layer). - -`TG(layer)` - toggles a layer on or off. As with `MO()`, you should set this key as `KC_TRNS` in the destination layer so that tapping it again actually toggles back to the original layer. Only works upwards in the layer stack. - -### Fun with modifier keys - -* `LSFT(kc)` - applies left Shift to *kc* (keycode) - `S(kc)` is an alias -* `RSFT(kc)` - applies right Shift to *kc* -* `LCTL(kc)` - applies left Control to *kc* -* `RCTL(kc)` - applies right Control to *kc* -* `LALT(kc)` - applies left Alt to *kc* -* `RALT(kc)` - applies right Alt to *kc* -* `LGUI(kc)` - applies left GUI (command/win) to *kc* -* `RGUI(kc)` - applies right GUI (command/win) to *kc* - -You can also chain these, like this: - - LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress. - -The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols. Their long names are also available and documented in `/quantum/keymap_common.h`. - - KC_TILD ~ - KC_EXLM ! - KC_AT @ - KC_HASH # - KC_DLR $ - KC_PERC % - KC_CIRC ^ - KC_AMPR & - KC_ASTR * - KC_LPRN ( - KC_RPRN ) - KC_UNDS _ - KC_PLUS + - KC_LCBR { - KC_RCBR } - KC_PIPE | - KC_COLN : - -`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down. - -These are the values you can use for the `mod` in `MT()` (right-hand modifiers are not available): - - * MOD_LCTL - * MOD_LSFT - * MOD_LALT - * MOD_LGUI - -These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped. - -We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact: - - * `CTL_T(kc)` - is LCTL when held and *kc* when tapped - * `SFT_T(kc)` - is LSFT when held and *kc* when tapped - * `ALT_T(kc)` - is LALT when held and *kc* when tapped - * `GUI_T(kc)` - is LGUI when held and *kc* when tapped - * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/) - -### Temporarily setting the default layer - -`DF(layer)` - sets default layer to *layer*. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does. - -### Remember: These are just aliases - -These functions work the same way that their `ACTION_*` functions do - they're just quick aliases. To dig into all of the tmk ACTION_* functions, please see the [TMK documentation](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/doc/keymap.md#2-action). - -Instead of using `FNx` when defining `ACTION_*` functions, you can use `F(x)` - the benefit here is being able to use more than 32 function actions (up to 4096), if you happen to need them. - -## Macro shortcuts: Send a whole string when pressing just one key - -Instead of using the `ACTION_MACRO` function, you can simply use `M(n)` to access macro *n* - *n* will get passed into the `action_get_macro` as the `id`, and you can use a switch statement to trigger it. This gets called on the keydown and keyup, so you'll need to use an if statement testing `record->event.pressed` (see keymap_default.c). - -```c -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. -{ - switch(id) { - case 0: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(255), T(H), T(E), T(L), T(L), W(255), T(O), END ); // this sends the string 'hello' when the macro executes - } - break; - } - return MACRO_NONE; -}; -``` -A macro can include the following commands: - -* I() change interval of stroke in milliseconds. -* D() press key. -* U() release key. -* T() type key(press and release). -* W() wait (milliseconds). -* END end mark. - -So above you can see the stroke interval changed to 255ms between each keystroke, then a bunch of keys being typed, waits a while, then the macro ends. - -Note: Using macros to have your keyboard send passwords for you is a bad idea. - -### Additional keycode aliases for software-implemented layouts (Colemak, Dvorak, etc) - -Everything is assuming you're in Qwerty (in software) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap: - - #include "keymap_<layout>.h" - -Where <layout> is "colemak" or "dvorak". After including this line, you will get access to: - - * `CM_*` for all of the Colemak-equivalent characters - * `DV_*` for all of the Dvorak-equivalent characters - -These implementations assume you're using Colemak or Dvorak on your OS, not on your keyboard - this is referred to as a software-implemented layout. If your computer is in Qwerty and your keymap is in Colemak or Dvorak, this is referred to as a firmware-implemented layout, and you won't need these features. - -To give an example, if you're using software-implemented Colemak, and want to get an `F`, you would use `CM_F` - `KC_F` under these same circumstances would result in `T`. - -## Additional language support - -In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware (but it's being worked on - see Unicode support). - -## Unicode support - -You can currently send 4 hex digits with your OS-specific modifier key (RALT for OSX with the "Unicode Hex Input" layout) - this is currently limited to supporting one OS at a time, and requires a recompile for switching. 8 digit hex codes are being worked on. The keycode function is `UC(n)`, where *n* is a 4 digit hexidecimal. Enable from the Makefile. - -## Other firmware shortcut keycodes - -* `RESET` - puts the MCU in DFU mode for flashing new firmware (with `make dfu`) -* `DEBUG` - the firmware into debug mode - you'll need hid_listen to see things -* `BL_ON` - turns the backlight on -* `BL_OFF` - turns the backlight off -* `BL_<n>` - sets the backlight to level *n* -* `BL_INC` - increments the backlight level by one -* `BL_DEC` - decrements the backlight level by one -* `BL_TOGG` - toggles the backlight -* `BL_STEP` - steps through the backlight levels - -Enable the backlight from the Makefile. - -## MIDI functionalty - -This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile. - -## Bluetooth functionality - -This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will. - -## Building - -Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build with the default keymap, simply run `make default`. - -### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` - -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/infinity60/readme.md b/keyboards/infinity60/readme.md index 97457b4077..bca26c69f9 100644 --- a/keyboards/infinity60/readme.md +++ b/keyboards/infinity60/readme.md @@ -1,29 +1,14 @@ -Infinity 60% keyboard firmware -====================== +Infinity 60% +============ -## Quantum MK Firmware +A compact community driven keyboard. -For the full Quantum feature list, see [the parent readme](/). +Keyboard Maintainer: QMK Community +Hardware Supported: Infinity 60% PCB +Hardware Availability: https://input.club/devices/infinity-keyboard/ -## Keymaps +Make example for this keyboard (after setting up your build environment): -Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` - - -## Compiling - -Download or clone the whole firmware and navigate to the keyboards/infinity60 folder. Once your dev env is setup, you'll be able to use the `make` command to both compile your keymap and flash it to your keyboard. - -To just compile, which generates the output files in the `.build` folder at the root of the repository, run `make keymap`, where keymap is the name of the keymap that you want to compile. - -## Flashing - -To flash the firmware to the keyboard - -1. First press the flash button on the bottom of the keyboard. If you already have a flah button mapped in a keyboard layout running on the keyboard, you can also use that. -2. Then run `make keymap-dfu-util`, where keymap is the name of the keymap you want to flash. On Linux based operating systems you might need to run the comamnd as root, for example `sudo make keymap-dfu-util` on Ubuntu. - -**Tip** `make keymap-dfu-util` will also compile the keymap if needed, so you can skip the compilation step if you want to. + make infinity60-default +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/jc65/Makefile b/keyboards/jc65/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/jc65/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/jc65/config.h b/keyboards/jc65/config.h new file mode 100644 index 0000000000..6e1306b276 --- /dev/null +++ b/keyboards/jc65/config.h @@ -0,0 +1,63 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0002 +#define MANUFACTURER dou +#define PRODUCT KEYCLACK65-V1 +#define DESCRIPTION JC65 PCB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* QMK JC65 PCB default pin-out */ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4, F5 } +#define UNUSED_PINS + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 20 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#define BACKLIGHT_PIN B6 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +#define DIODE_DIRECTION COL2ROW +#define DEBOUNCING_DELAY 5 + +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ + ) + + + +#endif diff --git a/keyboards/jc65/jc65.c b/keyboards/jc65/jc65.c new file mode 100644 index 0000000000..82b1d57416 --- /dev/null +++ b/keyboards/jc65/jc65.c @@ -0,0 +1,28 @@ +#include "jc65.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/jc65/jc65.h b/keyboards/jc65/jc65.h new file mode 100644 index 0000000000..41ec3cf64e --- /dev/null +++ b/keyboards/jc65/jc65.h @@ -0,0 +1,21 @@ +#ifndef JC65_H +#define JC65_H + +#include "quantum.h" + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \ + K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \ + K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, K3F, \ + K40, K41, K43, K44, K46, K48, K4A, K4B, K4C, K4D, K4E, K4F \ +)\ +{\ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F}, \ + {K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F}, \ + {K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F}, \ + {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E, K3F}, \ + {K40, K41, KC_NO, K43, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E, K4F}, \ +} + +#endif diff --git a/keyboards/jc65/keymaps/default/Makefile b/keyboards/jc65/keymaps/default/Makefile new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/jc65/keymaps/default/Makefile diff --git a/keyboards/jc65/keymaps/default/config.h b/keyboards/jc65/keymaps/default/config.h new file mode 100644 index 0000000000..a5568e400d --- /dev/null +++ b/keyboards/jc65/keymaps/default/config.h @@ -0,0 +1 @@ +#include "../../config.h" diff --git a/keyboards/jc65/keymaps/default/keymap.c b/keyboards/jc65/keymaps/default/keymap.c new file mode 100644 index 0000000000..de787f3892 --- /dev/null +++ b/keyboards/jc65/keymaps/default/keymap.c @@ -0,0 +1,11 @@ +#include "jc65.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_SPACE, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), +}; diff --git a/keyboards/jc65/keymaps/default/readme.md b/keyboards/jc65/keymaps/default/readme.md new file mode 100644 index 0000000000..13430a630b --- /dev/null +++ b/keyboards/jc65/keymaps/default/readme.md @@ -0,0 +1,10 @@ +Default Keymap +=== + +Super simple default keymap with only a base layer. + +Keymap Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo) + +Difference from base layout: This is (as close as I can tell) the same as the layout that ships on the boards other than default underglow color. + +Intended usage: This is mostly provided for testing before you build your own keymap and as a reference to a stock(ish) configuration diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/Makefile b/keyboards/jc65/keymaps/jetpacktuxedo/Makefile new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/jc65/keymaps/jetpacktuxedo/Makefile diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/config.h b/keyboards/jc65/keymaps/jetpacktuxedo/config.h new file mode 100644 index 0000000000..a5568e400d --- /dev/null +++ b/keyboards/jc65/keymaps/jetpacktuxedo/config.h @@ -0,0 +1 @@ +#include "../../config.h" diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/keymap.c b/keyboards/jc65/keymaps/jetpacktuxedo/keymap.c new file mode 100644 index 0000000000..af02b6f104 --- /dev/null +++ b/keyboards/jc65/keymaps/jetpacktuxedo/keymap.c @@ -0,0 +1,25 @@ +#include "jc65.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_SPACE, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_DEL, KC_TRNS, + MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_PGUP, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_HOME, KC_PGDN, KC_END + ), + [2] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + MO(1), RGB_SAD, RGB_SAI, KC_TRNS, KC_TRNS, RGB_HUD, RGB_HUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/readme.md b/keyboards/jc65/keymaps/jetpacktuxedo/readme.md new file mode 100644 index 0000000000..4083d8f470 --- /dev/null +++ b/keyboards/jc65/keymaps/jetpacktuxedo/readme.md @@ -0,0 +1,10 @@ +Jetpacktuxedo's Keymap +=== + +Split backspace, 6.25u space, caps is fn, my standard fn layer, reset + rgb controls on layer(2) + +Keymap Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo) + +Difference from base layout: The base layer is the same, except caps is fn, and there are additional tools on layers + +Intended usage: This is my daily driver keymap diff --git a/keyboards/jc65/readme.md b/keyboards/jc65/readme.md new file mode 100644 index 0000000000..55ed72229c --- /dev/null +++ b/keyboards/jc65/readme.md @@ -0,0 +1,22 @@ +JC65 +=== + +![JC65](https://imgur.com/a/C2oa5) + +The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy, and were also available choices for the 65% acrylic case group buy. In the near future both PCB versions should be available from keyclack.com when the storefront part opens. + +These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/planck/) + +Keyboard Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo) +Hardware Supported: JC65 rev.qmk +Hardware Availability: [keyclack.com](https://keyclack.com/) + +Make example for this keyboard (after setting up your build environment): + + make jc65-default + +Or to make and flash: + + make jc65-default-dfu + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/jc65/rules.mk b/keyboards/jc65/rules.mk new file mode 100644 index 0000000000..c2c02b6147 --- /dev/null +++ b/keyboards/jc65/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/jd40/readme.md b/keyboards/jd40/readme.md index 7daa0980eb..1684a562e0 100644 --- a/keyboards/jd40/readme.md +++ b/keyboards/jd40/readme.md @@ -1,17 +1,14 @@ -## jd40 mkii keyboard firmware +JD40 +=== - Pins: - MATRIX_ROW_PINS { F0, F1, F5, B4 } - MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2 } - RGB_DI_PIN D3 - -====================== +A compact 40% keyboard. -## Quantum MK Firmware +Keyboard Maintainer: QMK Community +Hardware Supported: JD40 PCB +Hardware Availability: [1up](https://1upkeyboards.com/jd40-mkii-1up-keyboards-logo-pcb.html) [mechanicalkeyboards.com](https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=2452) [originative](https://originative.co/products/jd40-pcb) -For the full Quantum feature list, see [the parent readme.md](/readme.md). +Make example for this keyboard (after setting up your build environment): -## Building + make atreus-default -Download or clone the whole firmware and navigate to the keyboards/jd40 folder. -Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Amtel Flip to program your .hex file. +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/jd45/readme.md b/keyboards/jd45/readme.md index 2822666e89..4bed1be416 100644 --- a/keyboards/jd45/readme.md +++ b/keyboards/jd45/readme.md @@ -1,4 +1,14 @@ -JD45 keyboard firmware -====================== +JD45 +=== -TODO: to be updated. +A compact 45% keyboard. + +Keyboard Maintainer: QMK Community +Hardware Supported: JD45 PCB +Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_list&c=346 + +Make example for this keyboard (after setting up your build environment): + + make jd45-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/kbd75/readme.md b/keyboards/kbd75/readme.md new file mode 100644 index 0000000000..42fdc0d386 --- /dev/null +++ b/keyboards/kbd75/readme.md @@ -0,0 +1,12 @@ +KBD75 +=== + +Keyboard Maintainer: QMK Community +Hardware Supported: KBD75 PCB +Hardware Availability: https://kbdfans.myshopify.com/products/kbd75-keyboard-set?variant=35638534029 + +Make example for this keyboard (after setting up your build environment): + + make kbd75-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/kc60/keymaps/mechmerlin/keymap.c b/keyboards/kc60/keymaps/mechmerlin/keymap.c new file mode 100644 index 0000000000..97d458dec4 --- /dev/null +++ b/keyboards/kc60/keymaps/mechmerlin/keymap.c @@ -0,0 +1,61 @@ +// This is the 60% layout preferred by u/merlin36 the host of the MechMerlin YouTube channel. +// The layout is highly influenced by the WKL B.Face and KBP V60 standard layouts. +// Layout designed for use on KC60 with no inswitch or underglow lighting. + +#include "kc60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, MO(2), KC_RALT, KC_RGUI, KC_RCTL \ + ), + [1] = KEYMAP( /* HHKB-ish Base Layout */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, MO(3), KC_RALT, KC_RGUI, KC_RCTL \ + ), + [2] = KEYMAP( /* FN Layer 1 - Basic QWERTY */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_NO, KC_PGUP, \ + KC_TRNS, KC_TRNS, KC_TRNS, TG(4), KC_NO, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + ), + [3] = KEYMAP( /* FN Layer 2 - HHKB-ish Base Layout */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + [4] = KEYMAP( /* Arrow Layers - Basic QWERTY ONLY */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_UP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT \ + ), + [5] = KEYMAP( /* Blank Layer for later usage */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/mechmerlin/readme.md b/keyboards/kc60/keymaps/mechmerlin/readme.md new file mode 100644 index 0000000000..3a67ab17f9 --- /dev/null +++ b/keyboards/kc60/keymaps/mechmerlin/readme.md @@ -0,0 +1,20 @@ +MechMerlin's KC60 Layout +====================== + +This is the 60% layout used by u/merlin36, host of the MechMerlin YouTube channel. +It has 5 layers, base QWERTY, base HHKB, FN 1, FN 2(HHKB), and an arrows only layer. + +Merlin's KC60 was acquired from Massdrop: https://www.massdrop.com/buy/kc60-mechanical-keyboard and is the Co-Star stabilizer version + +If you would like to program your KC60 using the manufacturer recommended approach, please follow the guide on keychatter: https://www.keychatter.com/2015/07/05/programming-the-kc60/. + +## Keymap Notes +- Highly influenced by the KBP V60 and WKL B.Face standard layouts +- Does not support any form of inswitch or underglow lighting as Merlin hates them. +- Arrow toggle switch is FN + Space +- Reset is FN + R +- HHKB keymap is approximate as keyboard is not built like HHKB + + +### Build +To build this keymap, simply run `make KEYMAP=mechmerlin`. diff --git a/keyboards/kc60/keymaps/workman-dead/keymap.c b/keyboards/kc60/keymaps/workman-dead/keymap.c index 9e3b9bb656..36e1c6506d 100644 --- a/keyboards/kc60/keymaps/workman-dead/keymap.c +++ b/keyboards/kc60/keymaps/workman-dead/keymap.c @@ -6,9 +6,6 @@ #define _FUN 3 #define _MS 4 -#define _______ KC_NO -#define XXXXXXX KC_TRNS - #define _DK_ACT 0 #define _DK_REL 1 #define _KC_COMS 2 diff --git a/keyboards/kitten_paw/readme.md b/keyboards/kitten_paw/readme.md index a6ef2a0672..55fac2ba5b 100644 --- a/keyboards/kitten_paw/readme.md +++ b/keyboards/kitten_paw/readme.md @@ -1,32 +1,16 @@ -kitten_paw keyboard firmware -====================== -This is the firmware for the 2016 revision of the Kitten Paw controller by Bathroom Epiphanies. -Most of the boilerplate code is the work of [BathroomEpiphanies](https://github.com/BathroomEpiphanies). +kitten_paw +========== -NKRO doesn't work at the moment, I don't know if I will take the time to find out how to fix this, so far 6KRO is enough for me. - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/kitten_paw folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. +This is the firmware for the 2016 revision of the Kitten Paw controller by Bathroom Epiphanies. Most of the boilerplate code is the work of [BathroomEpiphanies](https://github.com/BathroomEpiphanies). -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make`. - -### Other Keymaps +NKRO doesn't work at the moment, I don't know if I will take the time to find out how to fix this, so far 6KRO is enough for me. -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. +Keyboard Maintainer: QMK Community +Hardware Supported: Kitten Paw PCB +Hardware Availability: https://geekhack.org/index.php?topic=46700.0 -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +Make example for this keyboard (after setting up your build environment): -``` -$ make keymap=[default|jack|<name>] -``` + make kitten_paw-default -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/lets_split/common/glcdfont.c b/keyboards/lets_split/common/glcdfont.c deleted file mode 100644 index 6f88bd23a7..0000000000 --- a/keyboards/lets_split/common/glcdfont.c +++ /dev/null @@ -1,276 +0,0 @@ -// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. -// See gfxfont.h for newer custom bitmap font info. - -#ifndef FONT5X7_H -#define FONT5X7_H - -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/pgmspace.h> -#elif defined(ESP8266) - #include <pgmspace.h> -#else - #define PROGMEM -#endif - -// Standard ASCII 5x7 font - -static const unsigned char font[] PROGMEM = { - 0x00, 0x00, 0x00, 0x00, 0x00, - 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, - 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, - 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, - 0x18, 0x3C, 0x7E, 0x3C, 0x18, - 0x1C, 0x57, 0x7D, 0x57, 0x1C, - 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, - 0x00, 0x18, 0x3C, 0x18, 0x00, - 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, - 0x00, 0x18, 0x24, 0x18, 0x00, - 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, - 0x30, 0x48, 0x3A, 0x06, 0x0E, - 0x26, 0x29, 0x79, 0x29, 0x26, - 0x40, 0x7F, 0x05, 0x05, 0x07, - 0x40, 0x7F, 0x05, 0x25, 0x3F, - 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, - 0x7F, 0x3E, 0x1C, 0x1C, 0x08, - 0x08, 0x1C, 0x1C, 0x3E, 0x7F, - 0x14, 0x22, 0x7F, 0x22, 0x14, - 0x5F, 0x5F, 0x00, 0x5F, 0x5F, - 0x06, 0x09, 0x7F, 0x01, 0x7F, - 0x00, 0x66, 0x89, 0x95, 0x6A, - 0x60, 0x60, 0x60, 0x60, 0x60, - 0x94, 0xA2, 0xFF, 0xA2, 0x94, - 0x08, 0x04, 0x7E, 0x04, 0x08, - 0x10, 0x20, 0x7E, 0x20, 0x10, - 0x08, 0x08, 0x2A, 0x1C, 0x08, - 0x08, 0x1C, 0x2A, 0x08, 0x08, - 0x1E, 0x10, 0x10, 0x10, 0x10, - 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, - 0x30, 0x38, 0x3E, 0x38, 0x30, - 0x06, 0x0E, 0x3E, 0x0E, 0x06, - 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x5F, 0x00, 0x00, - 0x00, 0x07, 0x00, 0x07, 0x00, - 0x14, 0x7F, 0x14, 0x7F, 0x14, - 0x24, 0x2A, 0x7F, 0x2A, 0x12, - 0x23, 0x13, 0x08, 0x64, 0x62, - 0x36, 0x49, 0x56, 0x20, 0x50, - 0x00, 0x08, 0x07, 0x03, 0x00, - 0x00, 0x1C, 0x22, 0x41, 0x00, - 0x00, 0x41, 0x22, 0x1C, 0x00, - 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, - 0x08, 0x08, 0x3E, 0x08, 0x08, - 0x00, 0x80, 0x70, 0x30, 0x00, - 0x08, 0x08, 0x08, 0x08, 0x08, - 0x00, 0x00, 0x60, 0x60, 0x00, - 0x20, 0x10, 0x08, 0x04, 0x02, - 0x3E, 0x51, 0x49, 0x45, 0x3E, - 0x00, 0x42, 0x7F, 0x40, 0x00, - 0x72, 0x49, 0x49, 0x49, 0x46, - 0x21, 0x41, 0x49, 0x4D, 0x33, - 0x18, 0x14, 0x12, 0x7F, 0x10, - 0x27, 0x45, 0x45, 0x45, 0x39, - 0x3C, 0x4A, 0x49, 0x49, 0x31, - 0x41, 0x21, 0x11, 0x09, 0x07, - 0x36, 0x49, 0x49, 0x49, 0x36, - 0x46, 0x49, 0x49, 0x29, 0x1E, - 0x00, 0x00, 0x14, 0x00, 0x00, - 0x00, 0x40, 0x34, 0x00, 0x00, - 0x00, 0x08, 0x14, 0x22, 0x41, - 0x14, 0x14, 0x14, 0x14, 0x14, - 0x00, 0x41, 0x22, 0x14, 0x08, - 0x02, 0x01, 0x59, 0x09, 0x06, - 0x3E, 0x41, 0x5D, 0x59, 0x4E, - 0x7C, 0x12, 0x11, 0x12, 0x7C, - 0x7F, 0x49, 0x49, 0x49, 0x36, - 0x3E, 0x41, 0x41, 0x41, 0x22, - 0x7F, 0x41, 0x41, 0x41, 0x3E, - 0x7F, 0x49, 0x49, 0x49, 0x41, - 0x7F, 0x09, 0x09, 0x09, 0x01, - 0x3E, 0x41, 0x41, 0x51, 0x73, - 0x7F, 0x08, 0x08, 0x08, 0x7F, - 0x00, 0x41, 0x7F, 0x41, 0x00, - 0x20, 0x40, 0x41, 0x3F, 0x01, - 0x7F, 0x08, 0x14, 0x22, 0x41, - 0x7F, 0x40, 0x40, 0x40, 0x40, - 0x7F, 0x02, 0x1C, 0x02, 0x7F, - 0x7F, 0x04, 0x08, 0x10, 0x7F, - 0x3E, 0x41, 0x41, 0x41, 0x3E, - 0x7F, 0x09, 0x09, 0x09, 0x06, - 0x3E, 0x41, 0x51, 0x21, 0x5E, - 0x7F, 0x09, 0x19, 0x29, 0x46, - 0x26, 0x49, 0x49, 0x49, 0x32, - 0x03, 0x01, 0x7F, 0x01, 0x03, - 0x3F, 0x40, 0x40, 0x40, 0x3F, - 0x1F, 0x20, 0x40, 0x20, 0x1F, - 0x3F, 0x40, 0x38, 0x40, 0x3F, - 0x63, 0x14, 0x08, 0x14, 0x63, - 0x03, 0x04, 0x78, 0x04, 0x03, - 0x61, 0x59, 0x49, 0x4D, 0x43, - 0x00, 0x7F, 0x41, 0x41, 0x41, - 0x02, 0x04, 0x08, 0x10, 0x20, - 0x00, 0x41, 0x41, 0x41, 0x7F, - 0x04, 0x02, 0x01, 0x02, 0x04, - 0x40, 0x40, 0x40, 0x40, 0x40, - 0x00, 0x03, 0x07, 0x08, 0x00, - 0x20, 0x54, 0x54, 0x78, 0x40, - 0x7F, 0x28, 0x44, 0x44, 0x38, - 0x38, 0x44, 0x44, 0x44, 0x28, - 0x38, 0x44, 0x44, 0x28, 0x7F, - 0x38, 0x54, 0x54, 0x54, 0x18, - 0x00, 0x08, 0x7E, 0x09, 0x02, - 0x18, 0xA4, 0xA4, 0x9C, 0x78, - 0x7F, 0x08, 0x04, 0x04, 0x78, - 0x00, 0x44, 0x7D, 0x40, 0x00, - 0x20, 0x40, 0x40, 0x3D, 0x00, - 0x7F, 0x10, 0x28, 0x44, 0x00, - 0x00, 0x41, 0x7F, 0x40, 0x00, - 0x7C, 0x04, 0x78, 0x04, 0x78, - 0x7C, 0x08, 0x04, 0x04, 0x78, - 0x38, 0x44, 0x44, 0x44, 0x38, - 0xFC, 0x18, 0x24, 0x24, 0x18, - 0x18, 0x24, 0x24, 0x18, 0xFC, - 0x7C, 0x08, 0x04, 0x04, 0x08, - 0x48, 0x54, 0x54, 0x54, 0x24, - 0x04, 0x04, 0x3F, 0x44, 0x24, - 0x3C, 0x40, 0x40, 0x20, 0x7C, - 0x1C, 0x20, 0x40, 0x20, 0x1C, - 0x3C, 0x40, 0x30, 0x40, 0x3C, - 0x44, 0x28, 0x10, 0x28, 0x44, - 0x4C, 0x90, 0x90, 0x90, 0x7C, - 0x44, 0x64, 0x54, 0x4C, 0x44, - 0x00, 0x08, 0x36, 0x41, 0x00, - 0x00, 0x00, 0x77, 0x00, 0x00, - 0x00, 0x41, 0x36, 0x08, 0x00, - 0x02, 0x01, 0x02, 0x04, 0x02, - 0x3C, 0x26, 0x23, 0x26, 0x3C, - 0x1E, 0xA1, 0xA1, 0x61, 0x12, - 0x3A, 0x40, 0x40, 0x20, 0x7A, - 0x38, 0x54, 0x54, 0x55, 0x59, - 0x21, 0x55, 0x55, 0x79, 0x41, - 0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut - 0x21, 0x55, 0x54, 0x78, 0x40, - 0x20, 0x54, 0x55, 0x79, 0x40, - 0x0C, 0x1E, 0x52, 0x72, 0x12, - 0x39, 0x55, 0x55, 0x55, 0x59, - 0x39, 0x54, 0x54, 0x54, 0x59, - 0x39, 0x55, 0x54, 0x54, 0x58, - 0x00, 0x00, 0x45, 0x7C, 0x41, - 0x00, 0x02, 0x45, 0x7D, 0x42, - 0x00, 0x01, 0x45, 0x7C, 0x40, - 0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut - 0xF0, 0x28, 0x25, 0x28, 0xF0, - 0x7C, 0x54, 0x55, 0x45, 0x00, - 0x20, 0x54, 0x54, 0x7C, 0x54, - 0x7C, 0x0A, 0x09, 0x7F, 0x49, - 0x32, 0x49, 0x49, 0x49, 0x32, - 0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut - 0x32, 0x4A, 0x48, 0x48, 0x30, - 0x3A, 0x41, 0x41, 0x21, 0x7A, - 0x3A, 0x42, 0x40, 0x20, 0x78, - 0x00, 0x9D, 0xA0, 0xA0, 0x7D, - 0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut - 0x3D, 0x40, 0x40, 0x40, 0x3D, - 0x3C, 0x24, 0xFF, 0x24, 0x24, - 0x48, 0x7E, 0x49, 0x43, 0x66, - 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, - 0xFF, 0x09, 0x29, 0xF6, 0x20, - 0xC0, 0x88, 0x7E, 0x09, 0x03, - 0x20, 0x54, 0x54, 0x79, 0x41, - 0x00, 0x00, 0x44, 0x7D, 0x41, - 0x30, 0x48, 0x48, 0x4A, 0x32, - 0x38, 0x40, 0x40, 0x22, 0x7A, - 0x00, 0x7A, 0x0A, 0x0A, 0x72, - 0x7D, 0x0D, 0x19, 0x31, 0x7D, - 0x26, 0x29, 0x29, 0x2F, 0x28, - 0x26, 0x29, 0x29, 0x29, 0x26, - 0x30, 0x48, 0x4D, 0x40, 0x20, - 0x38, 0x08, 0x08, 0x08, 0x08, - 0x08, 0x08, 0x08, 0x08, 0x38, - 0x2F, 0x10, 0xC8, 0xAC, 0xBA, - 0x2F, 0x10, 0x28, 0x34, 0xFA, - 0x00, 0x00, 0x7B, 0x00, 0x00, - 0x08, 0x14, 0x2A, 0x14, 0x22, - 0x22, 0x14, 0x2A, 0x14, 0x08, - 0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code - 0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block - 0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block - 0x00, 0x00, 0x00, 0xFF, 0x00, - 0x10, 0x10, 0x10, 0xFF, 0x00, - 0x14, 0x14, 0x14, 0xFF, 0x00, - 0x10, 0x10, 0xFF, 0x00, 0xFF, - 0x10, 0x10, 0xF0, 0x10, 0xF0, - 0x14, 0x14, 0x14, 0xFC, 0x00, - 0x14, 0x14, 0xF7, 0x00, 0xFF, - 0x00, 0x00, 0xFF, 0x00, 0xFF, - 0x14, 0x14, 0xF4, 0x04, 0xFC, - 0x14, 0x14, 0x17, 0x10, 0x1F, - 0x10, 0x10, 0x1F, 0x10, 0x1F, - 0x14, 0x14, 0x14, 0x1F, 0x00, - 0x10, 0x10, 0x10, 0xF0, 0x00, - 0x00, 0x00, 0x00, 0x1F, 0x10, - 0x10, 0x10, 0x10, 0x1F, 0x10, - 0x10, 0x10, 0x10, 0xF0, 0x10, - 0x00, 0x00, 0x00, 0xFF, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0xFF, 0x10, - 0x00, 0x00, 0x00, 0xFF, 0x14, - 0x00, 0x00, 0xFF, 0x00, 0xFF, - 0x00, 0x00, 0x1F, 0x10, 0x17, - 0x00, 0x00, 0xFC, 0x04, 0xF4, - 0x14, 0x14, 0x17, 0x10, 0x17, - 0x14, 0x14, 0xF4, 0x04, 0xF4, - 0x00, 0x00, 0xFF, 0x00, 0xF7, - 0x14, 0x14, 0x14, 0x14, 0x14, - 0x14, 0x14, 0xF7, 0x00, 0xF7, - 0x14, 0x14, 0x14, 0x17, 0x14, - 0x10, 0x10, 0x1F, 0x10, 0x1F, - 0x14, 0x14, 0x14, 0xF4, 0x14, - 0x10, 0x10, 0xF0, 0x10, 0xF0, - 0x00, 0x00, 0x1F, 0x10, 0x1F, - 0x00, 0x00, 0x00, 0x1F, 0x14, - 0x00, 0x00, 0x00, 0xFC, 0x14, - 0x00, 0x00, 0xF0, 0x10, 0xF0, - 0x10, 0x10, 0xFF, 0x10, 0xFF, - 0x14, 0x14, 0x14, 0xFF, 0x14, - 0x10, 0x10, 0x10, 0x1F, 0x00, - 0x00, 0x00, 0x00, 0xF0, 0x10, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, - 0xFF, 0xFF, 0xFF, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xFF, 0xFF, - 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, - 0x38, 0x44, 0x44, 0x38, 0x44, - 0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta - 0x7E, 0x02, 0x02, 0x06, 0x06, - 0x02, 0x7E, 0x02, 0x7E, 0x02, - 0x63, 0x55, 0x49, 0x41, 0x63, - 0x38, 0x44, 0x44, 0x3C, 0x04, - 0x40, 0x7E, 0x20, 0x1E, 0x20, - 0x06, 0x02, 0x7E, 0x02, 0x02, - 0x99, 0xA5, 0xE7, 0xA5, 0x99, - 0x1C, 0x2A, 0x49, 0x2A, 0x1C, - 0x4C, 0x72, 0x01, 0x72, 0x4C, - 0x30, 0x4A, 0x4D, 0x4D, 0x30, - 0x30, 0x48, 0x78, 0x48, 0x30, - 0xBC, 0x62, 0x5A, 0x46, 0x3D, - 0x3E, 0x49, 0x49, 0x49, 0x00, - 0x7E, 0x01, 0x01, 0x01, 0x7E, - 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, - 0x44, 0x44, 0x5F, 0x44, 0x44, - 0x40, 0x51, 0x4A, 0x44, 0x40, - 0x40, 0x44, 0x4A, 0x51, 0x40, - 0x00, 0x00, 0xFF, 0x01, 0x03, - 0xE0, 0x80, 0xFF, 0x00, 0x00, - 0x08, 0x08, 0x6B, 0x6B, 0x08, - 0x36, 0x12, 0x36, 0x24, 0x36, - 0x06, 0x0F, 0x09, 0x0F, 0x06, - 0x00, 0x00, 0x18, 0x18, 0x00, - 0x00, 0x00, 0x10, 0x10, 0x00, - 0x30, 0x40, 0xFF, 0x01, 0x01, - 0x00, 0x1F, 0x01, 0x01, 0x1E, - 0x00, 0x19, 0x1D, 0x17, 0x12, - 0x00, 0x3C, 0x3C, 0x3C, 0x3C, - 0x00, 0x00, 0x00, 0x00, 0x00 // #255 NBSP -}; -#endif // FONT5X7_H diff --git a/keyboards/lets_split/keymaps/OLED_sample/config.h b/keyboards/lets_split/keymaps/OLED_sample/config.h index c7cbc9372d..57ed7d763b 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/config.h +++ b/keyboards/lets_split/keymaps/OLED_sample/config.h @@ -36,6 +36,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define FLIP_HALF #define SSD1306OLED +//#define OLED_ROTATE180 #define PREVENT_STUCK_MODIFIERS diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c index 274f917e21..9553309f89 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c +++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c @@ -2,7 +2,7 @@ #include "bootloader.h" #include "action_layer.h" #include "eeconfig.h" -#include "tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/TWI.h" +#include "LUFA/Drivers/Peripheral/TWI.h" #ifdef AUDIO_ENABLE #include "audio.h" #endif @@ -357,3 +357,91 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return MACRO_NONE; } + + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_LOWER 8 +#define L_RAISE 16 +#define L_FNLAYER 64 +#define L_NUMLAY 128 +#define L_NLOWER 136 +#define L_NFNLAYER 192 +#define L_MOUSECURSOR 256 +#define L_ADJUST 65560 + +void iota_gfx_task_user(void) { +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + struct CharacterMatrix matrix; + + matrix_clear(&matrix); + matrix_write_P(&matrix, PSTR("USB: ")); +#ifdef PROTOCOL_LUFA + switch (USB_DeviceState) { + case DEVICE_STATE_Unattached: + matrix_write_P(&matrix, PSTR("Unattached")); + break; + case DEVICE_STATE_Suspended: + matrix_write_P(&matrix, PSTR("Suspended")); + break; + case DEVICE_STATE_Configured: + matrix_write_P(&matrix, PSTR("Connected")); + break; + case DEVICE_STATE_Powered: + matrix_write_P(&matrix, PSTR("Powered")); + break; + case DEVICE_STATE_Default: + matrix_write_P(&matrix, PSTR("Default")); + break; + case DEVICE_STATE_Addressed: + matrix_write_P(&matrix, PSTR("Addressed")); + break; + default: + matrix_write_P(&matrix, PSTR("Invalid")); + } +#endif + +// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(&matrix, PSTR("\n\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(&matrix, PSTR("Default")); + break; + case L_RAISE: + matrix_write_P(&matrix, PSTR("Raise")); + break; + case L_LOWER: + matrix_write_P(&matrix, PSTR("Lower")); + break; + case L_ADJUST: + matrix_write_P(&matrix, PSTR("ADJUST")); + break; + default: + matrix_write(&matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(&matrix, led); + matrix_update(&display, &matrix); +}
\ No newline at end of file diff --git a/keyboards/lets_split/keymaps/ergodoxish/Makefile b/keyboards/lets_split/keymaps/ergodoxish/Makefile new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/keyboards/lets_split/keymaps/ergodoxish/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/lets_split/keymaps/ergodoxish/config.h b/keyboards/lets_split/keymaps/ergodoxish/config.h new file mode 100644 index 0000000000..7f33a43630 --- /dev/null +++ b/keyboards/lets_split/keymaps/ergodoxish/config.h @@ -0,0 +1,37 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS + +#endif
\ No newline at end of file diff --git a/keyboards/lets_split/keymaps/ergodoxish/keymap.c b/keyboards/lets_split/keymaps/ergodoxish/keymap.c new file mode 100644 index 0000000000..936312b2e0 --- /dev/null +++ b/keyboards/lets_split/keymaps/ergodoxish/keymap.c @@ -0,0 +1,214 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = KEYMAP( \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistent_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistent_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/lets_split/keymaps/fabian/Makefile b/keyboards/lets_split/keymaps/fabian/Makefile new file mode 100644 index 0000000000..b8c82cb99d --- /dev/null +++ b/keyboards/lets_split/keymaps/fabian/Makefile @@ -0,0 +1,9 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +# UNICODE_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/lets_split/keymaps/fabian/config.h b/keyboards/lets_split/keymaps/fabian/config.h new file mode 100644 index 0000000000..ba271d1ac6 --- /dev/null +++ b/keyboards/lets_split/keymaps/fabian/config.h @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS + + +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif diff --git a/keyboards/lets_split/keymaps/fabian/keymap.c b/keyboards/lets_split/keymaps/fabian/keymap.c new file mode 100644 index 0000000000..0af505b476 --- /dev/null +++ b/keyboards/lets_split/keymaps/fabian/keymap.c @@ -0,0 +1,221 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Custom +#define CTL_ESC CTL_T(KC_ESC) // Tap for Escape, hold for Control +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +#define SFT_BSP SFT_T(KC_BSPC) // Tap for Backspace, hold for Shift +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift) +// #define MEH_GRV MEH_T(KC_GRV) // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space | Bksp |Raise | GUI |AltGr | Ctrl |Adjust| + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + SFT_BSP, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, SFT_BSP, RAISE, KC_RGUI, KC_RALT, KC_RCTL, ADJUST \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space | Bksp |Raise | GUI |AltGr | Ctrl |Adjust| + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP( \ + HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + SFT_BSP, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, SFT_BSP, RAISE, KC_RGUI, KC_RALT, KC_RCTL, ADJUST \ +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space | Bksp |Raise | GUI |AltGr | Ctrl |Adjust| + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = KEYMAP( \ + HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ + SFT_BSP, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, SFT_BSP, RAISE, KC_RGUI, KC_RALT, KC_RCTL, ADJUST \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | MS L | MS D |MS U | MS R |MS Btn| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_BTN1, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | Left | Down | Up | Rght |MS_BN2| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_BTN2, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | |Reset | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Reset | Del | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, RESET, KC_DEL, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistent_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistent_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/lets_split/keymaps/piemod/README.md b/keyboards/lets_split/keymaps/piemod/README.md new file mode 100644 index 0000000000..f2a051da14 --- /dev/null +++ b/keyboards/lets_split/keymaps/piemod/README.md @@ -0,0 +1,31 @@ +PieMod +====== + +A keymap for users that need: + +- *P*: Programming symbols. + +- *I*: i3wm. + +- *E*: Emacs. + +- *M*: Macros. + +- *O*: Ortholinear. + +- *D*: Dvorak. + +Still a work-in-progress. Suggestions welcome @ https://github.com/dwrz/piemod. + +### Keymap + +![PieMod Keymap](./keymap.png) + +### TODO + +- [ ] Add Emacs layer. +- [ ] Add Macro layer. +- [ ] Add system control keys (rotation, brightness). +- [ ] Switch " and ' quotes (or function to toggle default). +- [ ] Add capslock. +. diff --git a/keyboards/lets_split/keymaps/piemod/config.h b/keyboards/lets_split/keymaps/piemod/config.h new file mode 100644 index 0000000000..7f33a43630 --- /dev/null +++ b/keyboards/lets_split/keymaps/piemod/config.h @@ -0,0 +1,37 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS + +#endif
\ No newline at end of file diff --git a/keyboards/lets_split/keymaps/piemod/keymap.c b/keyboards/lets_split/keymaps/piemod/keymap.c new file mode 100644 index 0000000000..558370fa86 --- /dev/null +++ b/keyboards/lets_split/keymaps/piemod/keymap.c @@ -0,0 +1,121 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _DVORAK 0 +#define _ARROW 1 //F(1) +#define _SYMBOL 2 // F(2) +#define _NUMBER 3 // F(3) +#define _FUNCTION 4 // F(4) +#define _EMACS 5 // F(5) +#define _MACROS 6 // F(6) +#define _MOUSE 7 // F(7) + +enum custom_keycodes { + DVORAK = SAFE_RANGE, + ARROW, + SYMBOL, + NUMBER, + FUNCTION, + EMACS, + MACROS, + MOUSE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_DVORAK] = KEYMAP( \ + KC_ESC, KC_QUOTE, F(7), KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DELETE, \ + KC_TAB, F(1), F(2), F(3), F(4), KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENTER, \ + KC_LSHIFT, KC_SCOLON, F(5), KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_MINUS, \ + F(10), F(6), KC_MENU, KC_LALT, KC_LGUI, KC_BSPACE, KC_SPACE, KC_RCTRL, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT \ +), + +[_ARROW] = KEYMAP( \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_UP, KC_END, KC_PGUP, \ + KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO \ +), + +[_SYMBOL] = KEYMAP( \ + KC_TILD, KC_GRAVE, KC_NO, KC_EQUAL, KC_PLUS, KC_NO, KC_LBRACKET, KC_RBRACKET, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ + KC_NO, KC_NO, KC_TRNS, KC_SCOLON, KC_COLN, KC_NO, KC_LCBR, KC_RCBR, KC_DLR, KC_PERC, KC_CIRC, F(21), \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BSLASH, KC_SLASH, KC_EXLM, KC_AT, KC_HASH, KC_PIPE, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ASTR, KC_SLASH, KC_MINUS, KC_PLUS, KC_EQUAL \ +), + +[_NUMBER] = KEYMAP( \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_7, KC_8, KC_9, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_4, KC_5, KC_6, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_0, KC_1, KC_2, KC_3, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ASTR, KC_SLASH, KC_MINUS, KC_PLUS, KC_EQUAL \ +), + +[_FUNCTION] = KEYMAP( \ + KC_PSCREEN, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_MEDIA_PLAY_PAUSE, \ + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DELETE, KC_INSERT, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ +), + +[_EMACS] = KEYMAP( \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO \ +), + +[_MACROS] = KEYMAP( \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO \ +), + +[_MOUSE] = KEYMAP( \ + KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_U, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_BTN1, KC_MS_BTN2, KC_MS_BTN3, KC_NO, KC_NO, KC_NO \ +) +}; + +enum function_id { + TEENSY_KEY, + CUSTOM_KEY, + L_CTRL_ALT_ENT, + R_CTRL_ALT_ENT, +}; + +int CAPSLOCKED = 0; + + const uint16_t PROGMEM fn_actions[] = { + + // DVORAK 0 + // ARROW 1, F(1) + // SYMBOL 2, F(2) + // NUMBER 3, F(3) + // FUNCTION 4, F(4) + // EMACS 5, F(5) + // MACROS 6, F(6) + // MOUSE 7, F(7) + + // Layers + [1] = ACTION_LAYER_TAP_KEY(1, KC_A), // FN1 = Momentary Arrow layer on A. + [2] = ACTION_LAYER_TAP_KEY(2, KC_O), // FN2 = Momentary symbOl layer on O. + [3] = ACTION_LAYER_TAP_KEY(3, KC_E), // FN3 = Momentary numbEr layer on E. + [4] = ACTION_LAYER_TAP_KEY(4, KC_U), // FN4 = Momentary fUnction layer on U. + [5] = ACTION_LAYER_TAP_KEY(5, KC_Q), // FN5 = Momentary emaQs layer on Q. + [6] = ACTION_LAYER_TAP_KEY(6, KC_LCTRL), // FN6 = Momentary MACROS on ??? key. + [7] = ACTION_LAYER_TAP_KEY(7, KC_COMMA), // FN7 = Momentary MOUSE on , key. + + // Special Keys + [10] = ACTION_MODS_KEY(KC_LCTRL, KC_LALT), // FN10 = Ctrl + Alt. + + // Symbols + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_SLASH), // FN21 = Question mark. + + }; diff --git a/keyboards/lets_split/keymaps/xk/Makefile b/keyboards/lets_split/keymaps/xk/Makefile new file mode 100644 index 0000000000..46eb7989d5 --- /dev/null +++ b/keyboards/lets_split/keymaps/xk/Makefile @@ -0,0 +1,19 @@ +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +USE_I2C = yes +TAP_DANCE_ENABLE = yes + +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/lets_split/keymaps/xk/config.h b/keyboards/lets_split/keymaps/xk/config.h new file mode 100644 index 0000000000..d37985043c --- /dev/null +++ b/keyboards/lets_split/keymaps/xk/config.h @@ -0,0 +1,47 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define TAPPING_TOGGLE 1 +#define TAPPING_TERM 200 +#define ONESHOT_TAP_TOGGLE 2 +#define ONESHOT_LAYER_TOGGLE 2 +#define ONESHOT_TIMEOUT 300 + +/* Use I2C or Serial, not both */ + +// #define USE_SERIAL +#define USE_I2C + +#define MOUSEKEY_INTERVAL 50 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 + +#define MOUSEKEY_WHEEL_DELAY 0 +#define MOUSEKEY_WHEEL_MAX_SPEED 8 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 + +// #define MASTER_LEFT +// #define _MASTER_RIGHT +#define EE_HANDS + + +#define PREVENT_STUCK_MODIFIERS +//#define IGNORE_MOD_TAP_INTERRUPT +#define PERMISSIVE_HOLD + +#endif
\ No newline at end of file diff --git a/keyboards/lets_split/keymaps/xk/keymap.c b/keyboards/lets_split/keymaps/xk/keymap.c new file mode 100755 index 0000000000..4d89a67f7f --- /dev/null +++ b/keyboards/lets_split/keymaps/xk/keymap.c @@ -0,0 +1,353 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _COLEMAK 0 +#define _KAMELOC 1 +#define _IKAPILA 2 +#define _IKASHFT 3 +#define _ARROWKY 4 +#define _FNCTION 5 +#define _NINEKEY 6 +#define _NAVIGAT 7 +#define _QWERTY 8 +#define _GRVTABL 15 + +enum custom_keycodes { + COLEMAK = SAFE_RANGE, + KAMELOC, + IKAPILA, + IKASHFT, + ARROWKY, + FNCTION, + NINEKEY, + NAVIGAT, + QWERTY, + GRVTABL, +}; + +//TD Declarations +enum { + VOM = 0, + PRN, + EGT, + HRD, + DSH, + QUT, + ESC, + EQE, + PGN, + UND, + BSDEL, + bsdel_mods, + BOOTME, +}; + +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// action-TAP for key/mod behavior LT(layer, kc) +#define XK_TAB LT(_FNCTION, KC_TAB) +#define XK_BSP LT(_KAMELOC, M(3)) + +#define XK_HARD LT(_FNCTION, M(1)) +#define XK_SPC LT(_IKAPILA, KC_SPC) +#define XK_ENT LT(_IKAPILA, KC_ENT) +#define XK_PGDN LT(_NAVIGAT, TD(PGN)) +#define XK_PREN LT(_IKASHFT, M(0)) +#define PIPBOY LT(_FNCTION, KC_BSLS) + +#define XK_DEL LT(_KAMELOC, KC_DEL) +#define XK_GRV LT(_GRVTABL, KC_GRV) + +// mod-TAP for mod/key behavior MT(modkey, kc) +#define ESC_IT MT(MOD_MEH, TD(ESC)) + +#define ALT_IT MT(MOD_LALT, KC_SCLN) +#define CTL_IT MT(MOD_LCTL, KC_SLSH) +#define XK_EGPT MT((MOD_LCTL | MOD_LALT | MOD_LGUI), M(2)) + +#define SFT_IT MT(MOD_RSFT, TG(_NAVIGAT)) +#define SFT_ENT MT(MOD_RSFT, KC_ENT) + +//sticky modifiers +#define KYCTL OSM(MOD_LCTL) +#define KYGUI OSM(MOD_LGUI) +#define KYSFT OSM(MOD_LSFT) +#define KYALT OSM(MOD_LALT) +#define CAKY OSM(MOD_LCTL | MOD_LALT) + +//shortcuts +#define CADEL LALT(LCTL(KC_DEL)) +#define CAINS LALT(LCTL(KC_INS)) +#define TGNKRO MAGIC_TOGGLE_NKRO + +#define NAVCH LCTL(KC_HOME) +#define NAVCPD LCTL(KC_PGDN) +#define NAVCPU LCTL(KC_PGUP) +#define NAVCE LCTL(KC_END) +#define NAVCU LCTL(KC_UP) +#define NAVCD LCTL(KC_DOWN) +#define NAVCL LCTL(KC_LEFT) +#define NAVCR LCTL(KC_RGHT) +#define NAVGU LGUI(KC_UP) +#define NAVGD LGUI(KC_DOWN) +#define NAVGL LGUI(KC_LEFT) +#define NAVGR LGUI(KC_RGHT) + +#define KC_NDSH LCTL(KC_PMNS) +#define KC_MDSH LALT(LCTL(KC_PMNS)) + +//!not sure if this old TMK code will work +//#define BOOTME ACTION_FUNCTION(BOOTLOADER) +#define LCLEAR ACTION_LAYER_SET_CLEAR(0) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* + TAP + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │TAB │ Q │ W │ F │ P │ B │ │ J │ L │ U │ Y │ ; │DEL │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │BKSP│ A │ R │ S │ T │ G │ │ M │ N │ E │ I │ O │ ' │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │OSFT│ X │ C │ D │ V │ Z │ │ K │ H │ , │ . │ / │LNAV│ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │OCTL│OALT│L9KY│ [] │OGUI│SPC │ │ENT │PGDN│ () │ {} │ \ │ ` │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + HOLD + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │L FN│ │ │ │ │ │ │ │ │ │ │ALT │L!@#│ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │L OH│ │ │ │ │ │ │ │ │ │ │ │L OH│ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │SFT │ │ │ │ │ │ │ │ │ │ │CTL │SFT │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │CTL │ALT │L9KY│L!@#│GUI │L123│ │L123│LNAV│L!@#│MEH │L FN│LGRV│ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + DOUBLETAP + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ │!F4 │ │ │ │ │ │ │ │ │ │ │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │OSML│ │ │ │ │UNDO│ │ │ │ │ │ │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │OSML│OSML│ESC │ │OSML│ │ │ │PGUP│ │ │ │ │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + Switch type + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │Br │Z │Z │Z │Z │Z │ │Z │Z │Z │Z │Br │G │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │G │Z │Z │Z │Z │Z │ │Z │Z │Z │Z │Z │Z │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │Y │Z │Z │Z │Z │Z │ │Z │Z │Z │Z │B │Y │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │Y │Y │C │Z │BLK │BLK │ │BLK │BLK │Z │Z │B │G │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ +*/ + +// Colemak PB&J (Mod-DH) +[_COLEMAK] = KEYMAP( \ + XK_TAB, TD(QUT), KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, ALT_IT, XK_GRV, \ + XK_BSP, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, XK_DEL, \ + KYSFT, KC_X, KC_C, KC_D, KC_V, TD(UND), KC_K, KC_H, KC_COMM, KC_DOT, CTL_IT, SFT_IT, \ + KYCTL, KYALT, ESC_IT, XK_HARD, KYGUI, XK_SPC, XK_ENT, XK_PGDN, XK_PREN, XK_EGPT, PIPBOY, XK_GRV \ +), + +// useful for one-handed typing +[_KAMELOC] = KEYMAP( \ + _______, KC_SCLN, KC_Y, KC_U, KC_L, KC_J, KC_B, KC_P, KC_F, KC_W, TD(QUT), _______, \ + _______, KC_O, KC_I, KC_E, KC_N, KC_M, KC_G, KC_T, KC_S, KC_R, KC_A, _______, \ + _______, KC_SLSH, KC_DOT, KC_COMM, KC_H, KC_K, TD(UND), KC_V, KC_D, KC_C, KC_X, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ ~ │ 1 │ 2 │ 3 │ 4 │ 5 │ │ 6 │ 7 │ 8 │ 9 │ 0 │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │DASH│MV- │ V+ │NEXT│PLAY│ │ ← │ ↓ │ ↑ │ → │INS │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ - │ = │ [ │ ] │ \ │ │HOME│PGDN│PGUP│END │ \ │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ +*/ +[_IKAPILA] = KEYMAP( \ + KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ + _______, TD(DSH), TD(VOM), KC_VOLU, KC_MNXT, KC_MPLY, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_INS, _______, \ + _______, KC_MINS, KC_EQL, TD(HRD), KC_RBRC, KC_BSLS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_BSLS, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ │ ! │ @ │ # │ $ │ % │ │ ^ │ & │ * │ ( │ ) │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │DASH│MV- │ V+ │NEXT│PLAY│ │HOME│PGDN│PGUP│END │PSCR│ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ _ │ + │ { │ } │ | │ │ ← │ ↓ │ ↑ │ → │ │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ +*/ + +[_IKASHFT] = KEYMAP( \ + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + KC_DEL, TD(DSH), TD(VOM), KC_VOLU, KC_MNXT, KC_MPLY, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_PSCR, _______, \ + _______, KC_UNDS, KC_PLUS, TD(EGT), KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_PAUS, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ │ → │ ↑ │ ← │ ↓ │ → │ │ → │ ↓ │ ← │ ↑ │ ↑ │ │ just in case someone hacks my IP with a 10MeG pipe, you know? + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ ← │ ↓ │ → │ ↑ │ ← │ │ ↑ │ ← │ ↓ │ → │ ← │ │ hacker_evasion layer + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ >>init network SEQUENCE + │ │ ↑ │ ← │ ↓ │ → │ ↑ │ │ ↓ │ ← │ ↑ │ → │ ← │ │ sleep 11; echo "DONE\n" + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ throttle INPUT 11001001 OUTPUT 010011001 ? FULL )); \ + │ │ │ │ → │ ← │ ↓ │ │ → │ ↑ │ ← │ ↓ │ ↑ │ │ <<chkconfig cargoCode ==== "'1'" + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ up down left right kc_b kc_a GUI +*/ + +[_ARROWKY] = KEYMAP( \ + _______, KC_RGHT, KC_UP, KC_LEFT, KC_DOWN, KC_RGHT, KC_UP, KC_LEFT, KC_DOWN, KC_RGHT, KC_UP, _______, \ + _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_UP, KC_LEFT, KC_DOWN, KC_RGHT, KC_UP, KC_LEFT, KC_DOWN, _______, \ + _______, KC_UP, KC_LEFT, KC_DOWN, KC_RGHT, KC_UP, KC_LEFT, KC_DOWN, KC_RGHT, KC_UP, KC_LEFT, _______, \ + _______, _______, KC_RGHT, KC_UP, KC_LEFT, KC_DOWN, KC_RGHT, KC_UP, KC_LEFT, KC_DOWN, KC_RGHT, _______ \ +), + +/* + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ │ F1 │ F2 │ F3 │ F4 │ F5 │ │ F6 │ F7 │ F8 │ F9 │ F10│ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ F11│ F12│ F13│ F14│ F15│ │ F16│ F17│ F18│ F19│ F20│ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ F21│ F22│ F23│ F24│PAUS│ │ │ │BOOT│RSET│NKRO│CAPS│ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ +*/ + +[_FNCTION] = KEYMAP( \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, \ + _______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, _______, \ + _______, KC_F21, KC_F22, KC_F23, KC_F24, _______, _______, _______,M(BOOTME), RESET, TGNKRO, KC_CAPS, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ │ → │ F7 │ F8 │ F9 │ ↑ │ │NLCK│ P7 │ P8 │ P9 │ P- │BDEL│ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ ← │ F4 │ F5 │ F6 │ ↓ │ │^INS│ P4 │ P5 │ P6 │ P+ │ () │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │CALT│ F1 │ F2 │ F3 │ │ │CALT│ P1 │ P2 │ P3 │ P* │ = │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ │ F0?│ │ │ │ │TGL │ P0 │ 0 │ P. │ P/ │ │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ +*/ + +[_NINEKEY] = KEYMAP( \ + _______, KC_RGHT, KC_F7, KC_F8, KC_F9, KC_UP, KC_NLCK, KC_P7, KC_P8, KC_P9, KC_PMNS, M(BSDEL), \ + _______, KC_LEFT, KC_F4, KC_F5, KC_F6, KC_DOWN, CAINS, KC_P4, KC_P5, KC_P6, KC_PPLS, XK_PREN, \ + _______, CAKY, KC_F1, KC_F2, KC_F3, _______, CAKY, KC_P1, KC_P2, KC_P3, KC_PAST, TD(EQE), \ + _______, _______, _______, KC_F11, _______, _______, TG(_NINEKEY), KC_P0, KC_0, KC_PDOT, KC_PSLS, _______ \ +), + +/* + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ESC │^PGD│^UP │^PGU│^PGU│^HOM│ │ │MW_L│ MU │MW_R│ AC2│ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │^LFT│^DWN│^RGT│^PGD│^END│ │ │ ML │ MD │ MR │ AC1│ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ M2 │ M4 │ M3 │ M1 │ M5 │ │ │MW_D│MW_U│SLCK│ AC0│ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ +*/ + +[_NAVIGAT] = KEYMAP( \ + KC_ESC, NAVCPD, NAVCU, NAVCPU, NAVCPU, NAVCH, XXXXXXX, KC_WH_L, KC_MS_U, KC_WH_R, KC_ACL2, _______, \ + _______, NAVCL, NAVCD, NAVCR, NAVCPD, NAVCE, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, KC_ACL1, _______, \ + _______, KC_BTN2, KC_BTN4, KC_BTN3, KC_BTN1, KC_BTN5, XXXXXXX, KC_WH_D, KC_WH_U, KC_SLCK, KC_ACL0, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +//ew. jk +[_QWERTY] = KEYMAP( \ + _______, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + _______, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* +//add greek symbols +//set_unicode_input_mode(UC_WINC); // Windows (with WinCompose, see wiki) + +//UC(0x250C),UC(0x252C),UC(0x2510),UC(0x2500),UC(0x2502) +//UC(0x251C),UC(0x253C),UC(0x2524), +//UC(0x2514),UC(0x2534),UC(0x2518), +*/ +[_GRVTABL] = KEYMAP( \ + TG(5), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TG(3), \ + TG(1), XXXXXXX, TD(VOM), KC_VOLU, KC_MNXT, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TG(1), \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TG(0), XXXXXXX, TG(4), XXXXXXX, TG(8), LCLEAR, \ + XXXXXXX, XXXXXXX, TG(6), TG(3), XXXXXXX, TG(2), TG(2), TG(7), TG(3), OSM(MOD_MEH), TG(5), _______ \ +)}; + +qk_tap_dance_action_t tap_dance_actions[] = { + [VOM] = ACTION_TAP_DANCE_DOUBLE(KC_VOLD, KC_MUTE), + [PRN] = ACTION_TAP_DANCE_DOUBLE(KC_LPRN, KC_RPRN), + [EGT] = ACTION_TAP_DANCE_DOUBLE(KC_LCBR, KC_RCBR), + [HRD] = ACTION_TAP_DANCE_DOUBLE(KC_LBRC, KC_RBRC), + [DSH] = ACTION_TAP_DANCE_DOUBLE(KC_NDSH, KC_MDSH), + [QUT] = ACTION_TAP_DANCE_DOUBLE(KC_Q, LALT(KC_F4)), + [ESC] = ACTION_TAP_DANCE_DOUBLE(TT(_NINEKEY), KC_ESC), + [EQE] = ACTION_TAP_DANCE_DOUBLE(KC_EQL, KC_ENT), + [PGN] = ACTION_TAP_DANCE_DOUBLE(KC_PGDN, KC_PGUP), + [UND] = ACTION_TAP_DANCE_DOUBLE(KC_Z, LCTL(KC_Z)), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + if (record->event.pressed) { + switch(id) { + case 0: + return MACRO(D(LSHIFT),T(9), T(0),U(LSHIFT), T(LEFT), END); + case 1: + return MACRO(T(LBRC), T(RBRC), T(LEFT), END); + case 2: + return MACRO(D(LSHIFT),T(LBRC), T(RBRC),U(LSHIFT), T(ENT), T(UP), END); + case 3: + return MACRO(T(BSPC), END); +/* static bool bsdel_mods = false; + case BSDEL: { + uint8_t kc = KC_BSPC; + if (record->event.pressed) { + if (keyboard_report->mods) { + kc = KC_DEL; + } + register_code (kc); + bsdel_mods = keyboard_report->mods; + } + else { + if (bsdel_mods) { + kc = KC_DEL; + } + + unregister_code (kc); + } + } +*/ case 4: + if (!record->event.pressed) { +// bootloader(); + } + } + } + return MACRO_NONE; +}; diff --git a/keyboards/lets_split/matrix.c b/keyboards/lets_split/matrix.c index 81dfb14455..4def27239c 100644 --- a/keyboards/lets_split/matrix.c +++ b/keyboards/lets_split/matrix.c @@ -21,9 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <stdint.h> #include <stdbool.h> #include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> +#include "wait.h" #include "print.h" #include "debug.h" #include "util.h" @@ -31,6 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "split_util.h" #include "pro_micro.h" #include "config.h" +#include "timer.h" #ifdef USE_I2C # include "i2c.h" @@ -38,14 +37,29 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # include "serial.h" #endif -#ifndef DEBOUNCE -# define DEBOUNCE 5 +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 #endif +#if (DEBOUNCING_DELAY > 0) + static uint16_t debouncing_time; + static bool debouncing = false; +#endif + +#if (MATRIX_COLS <= 8) +# define print_matrix_header() print("\nr/c 01234567\n") +# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop(matrix[i]) +# define ROW_SHIFTER ((uint8_t)1) +#else +# error "Currently only supports 8 COLS" +#endif +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + #define ERROR_DISCONNECT_COUNT 5 -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; +#define ROWS_PER_HAND (MATRIX_ROWS/2) + static uint8_t error_count = 0; static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; @@ -55,11 +69,19 @@ static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - +#if (DIODE_DIRECTION == COL2ROW) + static void init_cols(void); + static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); + static void unselect_rows(void); + static void select_row(uint8_t row); + static void unselect_row(uint8_t row); +#elif (DIODE_DIRECTION == ROW2COL) + static void init_rows(void); + static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); + static void unselect_cols(void); + static void unselect_col(uint8_t col); + static void select_col(uint8_t col); +#endif __attribute__ ((weak)) void matrix_init_quantum(void) { matrix_init_kb(); @@ -118,33 +140,54 @@ void matrix_init(void) } matrix_init_quantum(); + } uint8_t _matrix_scan(void) { - // Right hand is stored after the left in the matirx so, we need to offset it int offset = isLeftHand ? 0 : (ROWS_PER_HAND); +#if (DIODE_DIRECTION == COL2ROW) + // Set row, read cols + for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { +# if (DEBOUNCING_DELAY > 0) + bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); + + if (matrix_changed) { + debouncing = true; + debouncing_time = timer_read(); + PORTD ^= (1 << 2); + } + +# else + read_cols_on_row(matrix+offset, current_row); +# endif + + } + +#elif (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { +# if (DEBOUNCING_DELAY > 0) + bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); + if (matrix_changed) { + debouncing = true; + debouncing_time = timer_read(); + } +# else + read_rows_on_col(matrix+offset, current_col); +# endif - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); } +#endif - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { +# if (DEBOUNCING_DELAY > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } + debouncing = false; } - } +# endif return 1; } @@ -200,9 +243,7 @@ int serial_transaction(void) { uint8_t matrix_scan(void) { - int ret = _matrix_scan(); - - + uint8_t ret = _matrix_scan(); #ifdef USE_I2C if( i2c_transaction() ) { @@ -233,11 +274,10 @@ uint8_t matrix_scan(void) void matrix_slave_scan(void) { _matrix_scan(); - int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; #ifdef USE_I2C for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ i2c_slave_buffer[i] = matrix[offset+i]; } #else // USE_SERIAL @@ -284,33 +324,141 @@ uint8_t matrix_key_count(void) return count; } -static void init_cols(void) +#if (DIODE_DIRECTION == COL2ROW) + +static void init_cols(void) { - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + uint8_t pin = col_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI } } -static matrix_row_t read_cols(void) +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[current_row]; + + // Clear data in matrix row + current_matrix[current_row] = 0; + + // Select row and wait for row selecton to stabilize + select_row(current_row); + wait_us(30); + + // For each col... + for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + + // Select the col pin to read (active low) + uint8_t pin = col_pins[col_index]; + uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); + + // Populate the matrix row with the state of the col pin + current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); } - return result; + + // Unselect row + unselect_row(current_row); + + return (last_row_value != current_matrix[current_row]); +} + +static void select_row(uint8_t row) +{ + uint8_t pin = row_pins[row]; + _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT + _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW +} + +static void unselect_row(uint8_t row) +{ + uint8_t pin = row_pins[row]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI } static void unselect_rows(void) { - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { + uint8_t pin = row_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI } } -static void select_row(uint8_t row) +#elif (DIODE_DIRECTION == ROW2COL) + +static void init_rows(void) +{ + for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { + uint8_t pin = row_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) +{ + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + wait_us(30); + + // For each row... + for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) + { + + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) + { + // Pin LO, set col bit + current_matrix[row_index] |= (ROW_SHIFTER << current_col); + } + else + { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) + { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +static void select_col(uint8_t col) +{ + uint8_t pin = col_pins[col]; + _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT + _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW +} + +static void unselect_col(uint8_t col) +{ + uint8_t pin = col_pins[col]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI +} + +static void unselect_cols(void) { - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + uint8_t pin = col_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } } + +#endif diff --git a/keyboards/lets_split/pro_micro.h b/keyboards/lets_split/pro_micro.h deleted file mode 100644 index f9e7ed75d9..0000000000 --- a/keyboards/lets_split/pro_micro.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include <avr/pgmspace.h> - -// Workaround for wrong definitions in "iom32u4.h". -// This should be fixed in the AVR toolchain. -#undef UHCON -#undef UHINT -#undef UHIEN -#undef UHADDR -#undef UHFNUM -#undef UHFNUML -#undef UHFNUMH -#undef UHFLEN -#undef UPINRQX -#undef UPINTX -#undef UPNUM -#undef UPRST -#undef UPCONX -#undef UPCFG0X -#undef UPCFG1X -#undef UPSTAX -#undef UPCFG2X -#undef UPIENX -#undef UPDATX -#undef TCCR2A -#undef WGM20 -#undef WGM21 -#undef COM2B0 -#undef COM2B1 -#undef COM2A0 -#undef COM2A1 -#undef TCCR2B -#undef CS20 -#undef CS21 -#undef CS22 -#undef WGM22 -#undef FOC2B -#undef FOC2A -#undef TCNT2 -#undef TCNT2_0 -#undef TCNT2_1 -#undef TCNT2_2 -#undef TCNT2_3 -#undef TCNT2_4 -#undef TCNT2_5 -#undef TCNT2_6 -#undef TCNT2_7 -#undef OCR2A -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 -#undef OCR2B -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 - -#define NUM_DIGITAL_PINS 30 -#define NUM_ANALOG_INPUTS 12 - -#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) - -static const uint8_t SDA = 2; -static const uint8_t SCL = 3; -#define LED_BUILTIN 13 - -// Map SPI port to 'new' pins D14..D17 -static const uint8_t SS = 17; -static const uint8_t MOSI = 16; -static const uint8_t MISO = 14; -static const uint8_t SCK = 15; - -// Mapping of analog pins as digital I/O -// A6-A11 share with digital pins -static const uint8_t ADC0 = 18; -static const uint8_t ADC1 = 19; -static const uint8_t ADC2 = 20; -static const uint8_t ADC3 = 21; -static const uint8_t ADC4 = 22; -static const uint8_t ADC5 = 23; -static const uint8_t ADC6 = 24; // D4 -static const uint8_t ADC7 = 25; // D6 -static const uint8_t ADC8 = 26; // D8 -static const uint8_t ADC9 = 27; // D9 -static const uint8_t ADC10 = 28; // D10 -static const uint8_t ADC11 = 29; // D12 - -#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) 0 -#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) -#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) - -// __AVR_ATmega32U4__ has an unusual mapping of pins to channels -extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; -#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) - -#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA32U4 / ARDUINO LEONARDO -// -// D0 PD2 RXD1/INT2 -// D1 PD3 TXD1/INT3 -// D2 PD1 SDA SDA/INT1 -// D3# PD0 PWM8/SCL OC0B/SCL/INT0 -// D4 A6 PD4 ADC8 -// D5# PC6 ??? OC3A/#OC4A -// D6# A7 PD7 FastPWM #OC4D/ADC10 -// D7 PE6 INT6/AIN0 -// -// D8 A8 PB4 ADC11/PCINT4 -// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 -// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 -// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 -// D12 A11 PD6 T1/#OC4D/ADC9 -// D13# PC7 PWM10 CLK0/OC4A -// -// A0 D18 PF7 ADC7 -// A1 D19 PF6 ADC6 -// A2 D20 PF5 ADC5 -// A3 D21 PF4 ADC4 -// A4 D22 PF1 ADC1 -// A5 D23 PF0 ADC0 -// -// New pins D14..D17 to map SPI port to digital pins -// -// MISO D14 PB3 MISO,PCINT3 -// SCK D15 PB1 SCK,PCINT1 -// MOSI D16 PB2 MOSI,PCINT2 -// SS D17 PB0 RXLED,SS/PCINT0 -// -// Connected LEDs on board for TX and RX -// TXLED D24 PD5 XCK1 -// RXLED D17 PB0 -// HWB PE2 HWB - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, // D0 - PD2 - PD, // D1 - PD3 - PD, // D2 - PD1 - PD, // D3 - PD0 - PD, // D4 - PD4 - PC, // D5 - PC6 - PD, // D6 - PD7 - PE, // D7 - PE6 - - PB, // D8 - PB4 - PB, // D9 - PB5 - PB, // D10 - PB6 - PB, // D11 - PB7 - PD, // D12 - PD6 - PC, // D13 - PC7 - - PB, // D14 - MISO - PB3 - PB, // D15 - SCK - PB1 - PB, // D16 - MOSI - PB2 - PB, // D17 - SS - PB0 - - PF, // D18 - A0 - PF7 - PF, // D19 - A1 - PF6 - PF, // D20 - A2 - PF5 - PF, // D21 - A3 - PF4 - PF, // D22 - A4 - PF1 - PF, // D23 - A5 - PF0 - - PD, // D24 - PD5 - PD, // D25 / D6 - A7 - PD7 - PB, // D26 / D8 - A8 - PB4 - PB, // D27 / D9 - A9 - PB5 - PB, // D28 / D10 - A10 - PB6 - PD, // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(2), // D0 - PD2 - _BV(3), // D1 - PD3 - _BV(1), // D2 - PD1 - _BV(0), // D3 - PD0 - _BV(4), // D4 - PD4 - _BV(6), // D5 - PC6 - _BV(7), // D6 - PD7 - _BV(6), // D7 - PE6 - - _BV(4), // D8 - PB4 - _BV(5), // D9 - PB5 - _BV(6), // D10 - PB6 - _BV(7), // D11 - PB7 - _BV(6), // D12 - PD6 - _BV(7), // D13 - PC7 - - _BV(3), // D14 - MISO - PB3 - _BV(1), // D15 - SCK - PB1 - _BV(2), // D16 - MOSI - PB2 - _BV(0), // D17 - SS - PB0 - - _BV(7), // D18 - A0 - PF7 - _BV(6), // D19 - A1 - PF6 - _BV(5), // D20 - A2 - PF5 - _BV(4), // D21 - A3 - PF4 - _BV(1), // D22 - A4 - PF1 - _BV(0), // D23 - A5 - PF0 - - _BV(5), // D24 - PD5 - _BV(7), // D25 / D6 - A7 - PD7 - _BV(4), // D26 / D8 - A8 - PB4 - _BV(5), // D27 / D9 - A9 - PB5 - _BV(6), // D28 / D10 - A10 - PB6 - _BV(6), // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER0B, /* 3 */ - NOT_ON_TIMER, - TIMER3A, /* 5 */ - TIMER4D, /* 6 */ - NOT_ON_TIMER, - - NOT_ON_TIMER, - TIMER1A, /* 9 */ - TIMER1B, /* 10 */ - TIMER0A, /* 11 */ - - NOT_ON_TIMER, - TIMER4A, /* 13 */ - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { - 7, // A0 PF7 ADC7 - 6, // A1 PF6 ADC6 - 5, // A2 PF5 ADC5 - 4, // A3 PF4 ADC4 - 1, // A4 PF1 ADC1 - 0, // A5 PF0 ADC0 - 8, // A6 D4 PD4 ADC8 - 10, // A7 D6 PD7 ADC10 - 11, // A8 D8 PB4 ADC11 - 12, // A9 D9 PB5 ADC12 - 13, // A10 D10 PB6 ADC13 - 9 // A11 D12 PD6 ADC9 -}; - -#endif /* ARDUINO_MAIN */ - -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_USBVIRTUAL Serial -#define SERIAL_PORT_HARDWARE Serial1 -#define SERIAL_PORT_HARDWARE_OPEN Serial1 - -#endif /* Pins_Arduino_h */ diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index 610b776ee1..0ef7ff59d7 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -106,7 +106,7 @@ Notes on Software Configuration ------------------------------- Configuring the firmware is similar to any other QMK project. One thing -to note is that `MATIX_ROWS` in `config.h` is the total number of rows between +to note is that `MATRIX_ROWS` in `config.h` is the total number of rows between the two halves, i.e. if your split keyboard has 4 rows in each half, then `MATRIX_ROWS=8`. @@ -115,7 +115,7 @@ not be very difficult to adapt it to support more if required. Flashing ------- -From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. +From the `lets_split` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. Example: `make rev2-default-avrdude` diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index cc87ee31c6..c2b7d556eb 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -74,15 +74,3 @@ USE_I2C = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [ -z $$USB ]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/lets_split/split_util.c b/keyboards/lets_split/split_util.c index 39639c3b4b..346cbc9089 100644 --- a/keyboards/lets_split/split_util.c +++ b/keyboards/lets_split/split_util.c @@ -8,6 +8,7 @@ #include "matrix.h" #include "keyboard.h" #include "config.h" +#include "timer.h" #ifdef USE_I2C # include "i2c.h" @@ -42,6 +43,7 @@ static void keyboard_master_setup(void) { } static void keyboard_slave_setup(void) { + timer_init(); #ifdef USE_I2C i2c_slave_init(SLAVE_I2C_ADDRESS); #else diff --git a/keyboards/lets_split/ssd1306.c b/keyboards/lets_split/ssd1306.c deleted file mode 100644 index 5c6dff27f8..0000000000 --- a/keyboards/lets_split/ssd1306.c +++ /dev/null @@ -1,470 +0,0 @@ -#ifdef SSD1306OLED - -#include "ssd1306.h" -#include "config.h" -#include "i2c.h" -#include <string.h> -#include "print.h" -#include "lets_split.h" -#include "common/glcdfont.c" -#ifdef ADAFRUIT_BLE_ENABLE -#include "adafruit_ble.h" -#endif -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "pincontrol.h" - -//assign the right code to your layers -#define _BASE 0 -#define _LOWER 8 -#define _RAISE 16 -#define _FNLAYER 64 -#define _NUMLAY 128 -#define _NLOWER 136 -#define _NFNLAYER 192 -#define _MOUSECURSOR 256 -#define _ADJUST 65560 - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -// Controls the SSD1306 128x32 OLED display via i2c - -#define i2cAddress 0x3C - -#define DisplayHeight 32 -#define DisplayWidth 128 - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -static struct CharacterMatrix display; -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ -#define ScreenOffInterval 300000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(i2cAddress)) { - xprintf("failed to start write to %d\n", i2cAddress); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void matrix_clear(struct CharacterMatrix *matrix); - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(i2cAddress)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(void) { - bool success = false; - - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - -/// Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); -/* -// the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); -// end flip */ - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -static void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -static void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -static void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(i2cAddress)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1)); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -static void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -static void render_status_info(void) { -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - struct CharacterMatrix matrix; - - matrix_clear(&matrix); - matrix_write_P(&matrix, PSTR("USB: ")); -#ifdef PROTOCOL_LUFA - switch (USB_DeviceState) { - case DEVICE_STATE_Unattached: - matrix_write_P(&matrix, PSTR("Unattached")); - break; - case DEVICE_STATE_Suspended: - matrix_write_P(&matrix, PSTR("Suspended")); - break; - case DEVICE_STATE_Configured: - matrix_write_P(&matrix, PSTR("Connected")); - break; - case DEVICE_STATE_Powered: - matrix_write_P(&matrix, PSTR("Powered")); - break; - case DEVICE_STATE_Default: - matrix_write_P(&matrix, PSTR("Default")); - break; - case DEVICE_STATE_Addressed: - matrix_write_P(&matrix, PSTR("Addressed")); - break; - default: - matrix_write_P(&matrix, PSTR("Invalid")); - } -#endif - -// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(&matrix, PSTR("\n\nLayer: ")); - switch (layer_state) { - case _BASE: - matrix_write_P(&matrix, PSTR("Default")); - break; - case _RAISE: - matrix_write_P(&matrix, PSTR("Raise")); - break; - case _LOWER: - matrix_write_P(&matrix, PSTR("Lower")); - break; - case _ADJUST: - matrix_write_P(&matrix, PSTR("ADJUST")); - break; - default: - matrix_write(&matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(&matrix, led); - matrix_update(&display, &matrix); -} - -void iota_gfx_task(void) { - render_status_info(); - - if (display.dirty) { - iota_gfx_flush(); - } - - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } -} -#endif diff --git a/keyboards/lets_split/ssd1306.h b/keyboards/lets_split/ssd1306.h deleted file mode 100644 index b0c74f987e..0000000000 --- a/keyboards/lets_split/ssd1306.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef SSD1306_H -#define SSD1306_H - -#include <stdbool.h> -#include <stdio.h> - -bool iota_gfx_init(void); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -#endif diff --git a/keyboards/mechmini/README.md b/keyboards/mechmini/README.md index 72743319fa..ed590f3f1b 100644 --- a/keyboards/mechmini/README.md +++ b/keyboards/mechmini/README.md @@ -1,16 +1,24 @@ -mechmini keyboard firmware -========================== +mechmini +======== -This is a port of the QMK firmware for boards that are based on the -ps2avrGB firmware, like the [ps2avrGB -keyboard](https://www.keyclack.com/product/gb-ps2avrgb/) or the ones sold -by [Winkeyless](http://winkeyless.kr/product/ps2avrgb-parts/). +A compact ortholinear/staggered keyboard. + +Keyboard Maintainer: QMK Community +Hardware Supported: mechmini PCB +Hardware Availability: https://mechkeys.ca/collections/keyboards/products/mechmini-2-0-pcb + +Make example for this keyboard (after setting up your build environment): + + make mechmini-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +## Mechmini Notes Note that this is a complete replacement for the firmware, so you won't be using Bootmapper Client to change any keyboard settings, since not all the USB report options are supported. - ## Installing First, install the requirements. These commands are for OSX, but all you diff --git a/keyboards/minidox/Makefile b/keyboards/minidox/Makefile new file mode 100644 index 0000000000..30b43c4eaa --- /dev/null +++ b/keyboards/minidox/Makefile @@ -0,0 +1,5 @@ +SUBPROJECT_DEFAULT = rev1 + +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/minidox/config.h b/keyboards/minidox/config.h new file mode 100644 index 0000000000..306a486cb9 --- /dev/null +++ b/keyboards/minidox/config.h @@ -0,0 +1,74 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define MANUFACTURER That-Canadian +#define PRODUCT MiniDox +#define DESCRIPTION A compact version of the Ergo Dox + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 5 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#ifdef SUBPROJECT_rev1 + #include "rev1/config.h" +#endif + +#endif diff --git a/keyboards/minidox/eeprom-lefthand.eep b/keyboards/minidox/eeprom-lefthand.eep new file mode 100644 index 0000000000..e5a7bc1e57 --- /dev/null +++ b/keyboards/minidox/eeprom-lefthand.eep @@ -0,0 +1,2 @@ +:0F000000000000000000000000000000000001F0
+:00000001FF
diff --git a/keyboards/minidox/eeprom-righthand.eep b/keyboards/minidox/eeprom-righthand.eep new file mode 100644 index 0000000000..7ea44f52ef --- /dev/null +++ b/keyboards/minidox/eeprom-righthand.eep @@ -0,0 +1,2 @@ +:0F000000000000000000000000000000000000F1
+:00000001FF
diff --git a/keyboards/minidox/i2c.c b/keyboards/minidox/i2c.c new file mode 100644 index 0000000000..084c890c40 --- /dev/null +++ b/keyboards/minidox/i2c.c @@ -0,0 +1,162 @@ +#include <util/twi.h> +#include <avr/io.h> +#include <stdlib.h> +#include <avr/interrupt.h> +#include <util/twi.h> +#include <stdbool.h> +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) + lim++; + + // easier way, but will wait slightly longer + // _delay_us(100); +} + +// Setup twi to run at 100kHz +void i2c_master_init(void) { + // no prescaler + TWSR = 0; + // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); + + i2c_delay(); + + // check that we started successfully + if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) + return 1; + + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) + return 1; // slave did not acknowledge + else + return 0; // success +} + + +// Finish the i2c transaction. +void i2c_master_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + uint16_t lim = 0; + while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) + lim++; +} + +// Write one byte to the i2c slave. +// returns 0 => slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + // check if the slave acknowledged us + return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; +} + +// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, +// if ack=0 the acknowledge bit is not set. +// returns: byte read from i2c device +uint8_t i2c_master_read(int ack) { + TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); + + i2c_delay(); + return TWDR; +} + +void i2c_reset_state(void) { + TWCR = 0; +} + +void i2c_slave_init(uint8_t address) { + TWAR = address << 0; // slave i2c address + // TWEN - twi enable + // TWEA - enable address acknowledgement + // TWINT - twi interrupt flag + // TWIE - enable the twi interrupt + TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); +} + +ISR(TWI_vect); + +ISR(TWI_vect) { + uint8_t ack = 1; + switch(TW_STATUS) { + case TW_SR_SLA_ACK: + // this device has been addressed as a slave receiver + slave_has_register_set = false; + break; + + case TW_SR_DATA_ACK: + // this device has received data as a slave receiver + // The first byte that we receive in this transaction sets the location + // of the read/write location of the slaves memory that it exposes over + // i2c. After that, bytes will be written at slave_buffer_pos, incrementing + // slave_buffer_pos after each write. + if(!slave_has_register_set) { + slave_buffer_pos = TWDR; + // don't acknowledge the master if this memory loctaion is out of bounds + if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); +} +#endif diff --git a/keyboards/minidox/i2c.h b/keyboards/minidox/i2c.h new file mode 100644 index 0000000000..c15b6bc506 --- /dev/null +++ b/keyboards/minidox/i2c.h @@ -0,0 +1,49 @@ +#ifndef I2C_H +#define I2C_H + +#include <stdint.h> + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 400000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + +#endif diff --git a/keyboards/minidox/keymaps/default/keymap.c b/keyboards/minidox/keymaps/default/keymap.c new file mode 100644 index 0000000000..3fa20e1ebe --- /dev/null +++ b/keyboards/minidox/keymaps/default/keymap.c @@ -0,0 +1,168 @@ +#include "minidox.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * + * ,----------------------------------. ,----------------------------------. + * | Q | W | E | R | T | | Y | U | I | O | P | + * |------+------+------+------+------| |------+------+------+------+------| + * | A | S | D | F | G | | H | J | K | L | ; | + * |------+------+------+------+------| |------+------+------+------+------| + * | Z | X | C | V | B | | N | M | , | . | / | + * `----------------------------------' `----------------------------------' + * ,--------------------. ,------,-------------. + * | Ctrl | LOWER| | | | RAISE| Shift| + * `-------------| Space| |BckSpc|------+------. + * | | | | + * `------' `------' + */ +[_QWERTY] = KEYMAP( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ + KC_LCTL, LOWER, KC_SPC, KC_BSPC, RAISE, OSM(MOD_LSFT) \ +), + +/* Raise + * + * ,----------------------------------. ,----------------------------------. + * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | + * |------+------+------+------+------| |------+------+------+------+------| + * | Tab | Left | Down | Up | Right| | | - | = | [ | ] | + * |------+------+------+------+------| |------+------+------+------+------| + * | Ctrl| ` | GUI | Alt | | | | | | \ | ' | + * `----------------------------------' `----------------------------------' + * ,--------------------. ,------,-------------. + * | | LOWER| | | | RAISE| | + * `-------------| | | |------+------. + * | | | | + * `------' `------' + */ +[_RAISE] = KEYMAP( \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ + KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ + KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, _______, _______, _______, _______, KC_BSLS, KC_QUOT, \ + _______, _______, _______, _______, _______, _______ \ +), + +/* Lower + * + * ,----------------------------------. ,----------------------------------. + * | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + * |------+------+------+------+------| |------+------+------+------+------| + * | Esc | | | | | | | _ | + | { | } | + * |------+------+------+------+------| |------+------+------+------+------| + * | Caps| ~ | | | | | | | | | | " | + * `----------------------------------' `----------------------------------' + * ,--------------------. ,------,-------------. + * | | LOWER| | | | RAISE| Del | + * `-------------| | | Enter|------+------. + * | | | | + * `------' `------' + */ +[_LOWER] = KEYMAP( \ + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ + KC_ESC, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ + KC_CAPS, KC_TILD, _______, _______, _______, _______, _______, _______, KC_PIPE, KC_DQT, \ + _______, _______, _______, KC_ENT, _______, KC_DEL \ +), + +/* Adjust (Lower + Raise) + * + * ,----------------------------------. ,----------------------------------. + * | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | + * |------+------+------+------+------| |------+------+------+------+------| + * | F11 | F12 | | | | | | | |Taskmg|caltde| + * |------+------+------+------+------| |------+------+------+------+------| + * | Reset| | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,--------------------. ,------,-------------. + * | | LOWER| | | | RAISE| | + * `-------------| | | |------+------. + * | | | | + * `------' `------' + */ +[_ADJUST] = KEYMAP( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, \ + KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, TSKMGR, CALTDEL, \ + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______ \ +) +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/minidox/keymaps/that_canadian/Makefile b/keyboards/minidox/keymaps/that_canadian/Makefile new file mode 100644 index 0000000000..52ef1ad3e4 --- /dev/null +++ b/keyboards/minidox/keymaps/that_canadian/Makefile @@ -0,0 +1,5 @@ +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/minidox/keymaps/that_canadian/config.h b/keyboards/minidox/keymaps/that_canadian/config.h new file mode 100644 index 0000000000..5832d1866e --- /dev/null +++ b/keyboards/minidox/keymaps/that_canadian/config.h @@ -0,0 +1,39 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define USE_SERIAL + +#define EE_HANDS + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D7 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif
\ No newline at end of file diff --git a/keyboards/minidox/keymaps/that_canadian/keymap.c b/keyboards/minidox/keymaps/that_canadian/keymap.c new file mode 100644 index 0000000000..b1ca139b7b --- /dev/null +++ b/keyboards/minidox/keymaps/that_canadian/keymap.c @@ -0,0 +1,165 @@ +#include "minidox.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * + * ,----------------------------------. ,----------------------------------. + * | Q | W | E | R | T | | Y | U | I | O | P | + * |------+------+------+------+------| |------+------+------+------+------| + * | A | S | D | F | G | | H | J | K | L | ; | + * |------+------+------+------+------| |------+------+------+------+------| + * | Z | X | C | V | B | | N | M | , | . | / | + * `----------------------------------' `----------------------------------' + * ,--------------------. ,------,-------------. + * | Shift| LOWER| | | | RAISE| Ctrl | + * `-------------| Space| |BckSpc|------+------. + * | | | | + * `------' `------' + */ +[_QWERTY] = KEYMAP( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ + OSM(MOD_LSFT), LOWER, KC_SPC, KC_BSPC, RAISE, KC_LCTL \ +), + +/* Raise + * + * ,----------------------------------. ,----------------------------------. + * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | + * |------+------+------+------+------| |------+------+------+------+------| + * | Tab | Left | Down | Up | Right| | | - | = | [ | ] | + * |------+------+------+------+------| |------+------+------+------+------| + * | Ctrl| ` | GUI | Alt | | | | | | \ | ' | + * `----------------------------------' `----------------------------------' + * ,--------------------. ,------,-------------. + * | | LOWER| | | | RAISE| | + * `-------------| | | |------+------. + * | | | | + * `------' `------' + */ +[_RAISE] = KEYMAP( \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ + KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ + KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, _______, _______, _______, _______, KC_BSLS, KC_QUOT, \ + _______, _______, _______, _______, _______, _______ \ +), + +/* Lower + * + * ,----------------------------------. ,----------------------------------. + * | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + * |------+------+------+------+------| |------+------+------+------+------| + * | Esc | | | | | | | _ | + | { | } | + * |------+------+------+------+------| |------+------+------+------+------| + * | Caps| ~ | | | | | | | | | | " | + * `----------------------------------' `----------------------------------' + * ,--------------------. ,------,-------------. + * | | LOWER| | | | RAISE| Del | + * `-------------| | | Enter|------+------. + * | | | | + * `------' `------' + */ +[_LOWER] = KEYMAP( \ + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ + KC_ESC, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ + KC_CAPS, KC_TILD, _______, _______, _______, _______, _______, _______, KC_PIPE, KC_DQT, \ + _______, _______, _______, KC_ENT, _______, KC_DEL \ +), + +/* Adjust (Lower + Raise) + * + * ,----------------------------------. ,----------------------------------. + * | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | Up | F9 | F10 | + * |------+------+------+------+------| |------+------+------+------+------| + * | F11 | F12 | |RGBSAI|RGBSAD| | | Left | Down |Right |caltde| + * |------+------+------+------+------| |------+------+------+------+------| + * | Reset|RGBTOG|RGBMOD|RGBHUI|RGBHUD| |RGBVAI|RGBVAD| F8 |Taskmg| | + * `----------------------------------' `----------------------------------' + * ,--------------------. ,------,-------------. + * | | LOWER| | | | RAISE| | + * `-------------| | | |------+------. + * | | | | + * `------' `------' + */ +[_ADJUST] = KEYMAP( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_UP, KC_F9, KC_F10, \ + KC_F11, KC_F12, _______, RGB_SAI, RGB_SAD, _______, KC_LEFT, KC_DOWN, KC_RGHT, CALTDEL, \ + RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_VAI, RGB_VAD, KC_F8, TSKMGR, _______, \ + _______, _______, _______, _______, _______, _______ \ +) +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/minidox/matrix.c b/keyboards/minidox/matrix.c new file mode 100644 index 0000000000..81dfb14455 --- /dev/null +++ b/keyboards/minidox/matrix.c @@ -0,0 +1,316 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "serial.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + if (serial_update_buffers()) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + int ret = _matrix_scan(); + + + +#ifdef USE_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction() ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + matrix_scan_quantum(); + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); + +#ifdef USE_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +static void init_cols(void) +{ + for(int x = 0; x < MATRIX_COLS; x++) { + _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/minidox/minidox.c b/keyboards/minidox/minidox.c new file mode 100644 index 0000000000..b4bffbb3e4 --- /dev/null +++ b/keyboards/minidox/minidox.c @@ -0,0 +1 @@ +#include "minidox.h"
\ No newline at end of file diff --git a/keyboards/minidox/minidox.h b/keyboards/minidox/minidox.h new file mode 100644 index 0000000000..479c7aec71 --- /dev/null +++ b/keyboards/minidox/minidox.h @@ -0,0 +1,10 @@ +#ifndef MINIDOX_H +#define MINIDOX_H + +#ifdef SUBPROJECT_rev1 + #include "rev1.h" +#endif + +#include "quantum.h" + +#endif
\ No newline at end of file diff --git a/keyboards/atreus62/pro_micro.h b/keyboards/minidox/pro_micro.h index f9e7ed75d9..f9e7ed75d9 100644 --- a/keyboards/atreus62/pro_micro.h +++ b/keyboards/minidox/pro_micro.h diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md new file mode 100644 index 0000000000..c15fd244a4 --- /dev/null +++ b/keyboards/minidox/readme.md @@ -0,0 +1,75 @@ +MiniDox +===== + +![MiniDox](http://i.imgur.com/iWb3yO0.jpg) + +A compact version of the ErgoDox + +Keyboard Maintainer: That-Canadian +Hardware Supported: MiniDox PCB rev1 Pro Micro + +Make example for this keyboard (after setting up your build environment): + + make minidox-rev1-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +## Build Guide + +A build guide for putting together the MiniDox v1 can be found here: [MiniDox Build Log / Guide](http://imgur.com/a/vImo6) + +Flashing +------- +Note: Most of this is copied from the Let's Split readme, because it is awesome + +From the `minidox` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. +Example: `make rev1-default-avrdude` + +Choosing which board to plug the USB cable into (choosing Master) +-------- +Because the two boards are identical, the firmware has logic to differentiate the left and right board. + +It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. + +The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side. + +The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. + +### Setting the left hand as master +If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. + +### Setting the right hand as master +If you always plug the usb cable into the right board, add an extra flag to your `config.h` +``` + #define MASTER_RIGHT +``` + +### Setting EE_hands to use either hands as master +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. + +The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep +// or the equivalent in dfu-programmer + +``` +and similarly for right half +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep +// or the equivalent in dfu-programmer +``` + +NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) + +After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. + +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout using bootmagic's default layout option. +Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. diff --git a/keyboards/minidox/rev1/Makefile b/keyboards/minidox/rev1/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/minidox/rev1/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/minidox/rev1/config.h b/keyboards/minidox/rev1/config.h new file mode 100644 index 0000000000..9799c41994 --- /dev/null +++ b/keyboards/minidox/rev1/config.h @@ -0,0 +1,38 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + +#include "../config.h" + +#define DEVICE_VER 0x0001 + +// wiring of each half +#define MATRIX_ROW_PINS { B2, B6, B4, B5 } +#define MATRIX_COL_PINS { F4, D3, D2, D1, D4 } + +#define CATERINA_BOOTLOADER + +#define USE_SERIAL + +//#define EE_HANDS + +#define I2C_MASTER_LEFT +//#define I2C_MASTER_RIGHT + +#endif diff --git a/keyboards/minidox/rev1/rev1.c b/keyboards/minidox/rev1/rev1.c new file mode 100644 index 0000000000..72b473933e --- /dev/null +++ b/keyboards/minidox/rev1/rev1.c @@ -0,0 +1 @@ +#include "minidox.h" diff --git a/keyboards/minidox/rev1/rev1.h b/keyboards/minidox/rev1/rev1.h new file mode 100644 index 0000000000..379dbf64ad --- /dev/null +++ b/keyboards/minidox/rev1/rev1.h @@ -0,0 +1,28 @@ +#ifndef REV1_H +#define REV1_H + +#include "../minidox.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +//void promicro_bootloader_jmp(bool program); + +#define KEYMAP( \ + k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, \ + k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, \ + k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, \ + k33, k34, k35, k75, k74, k73 \ + ) \ + { \ + { k01, k02, k03, k04, k05 }, \ + { k11, k12, k13, k14, k15 }, \ + { k21, k22, k23, k24, k25 }, \ + { KC_NO, KC_NO, k33, k34, k35 }, \ + { k41, k42, k43, k44, k45 }, \ + { k51, k52, k53, k54, k55 }, \ + { k61, k62, k63, k64, k65 }, \ + { KC_NO, KC_NO, k73, k74, k75 } \ + } + +#endif
\ No newline at end of file diff --git a/keyboards/minidox/rev1/rules.mk b/keyboards/minidox/rev1/rules.mk new file mode 100644 index 0000000000..a0825b4ef6 --- /dev/null +++ b/keyboards/minidox/rev1/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/minidox/rules.mk b/keyboards/minidox/rules.mk new file mode 100644 index 0000000000..539456ae02 --- /dev/null +++ b/keyboards/minidox/rules.mk @@ -0,0 +1,74 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +USE_I2C ?= no +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes diff --git a/keyboards/minidox/serial.c b/keyboards/minidox/serial.c new file mode 100644 index 0000000000..6faed09ce0 --- /dev/null +++ b/keyboards/minidox/serial.c @@ -0,0 +1,228 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include <avr/io.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <stdbool.h> +#include "serial.h" + +#ifdef USE_SERIAL + +// Serial pulse period in microseconds. Its probably a bad idea to lower this +// value. +#define SERIAL_DELAY 24 + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + +#define SLAVE_DATA_CORRUPT (1<<0) +volatile uint8_t status = 0; + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static +void serial_input(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void serial_master_init(void) { + serial_output(); + serial_high(); +} + +void serial_slave_init(void) { + serial_input(); + + // Enable INT0 + EIMSK |= _BV(INT0); + // Trigger on falling edge of INT0 + EICRA &= ~(_BV(ISC00) | _BV(ISC01)); +} + +// Used by the master to synchronize timing with the slave. +static +void sync_recv(void) { + serial_input(); + // This shouldn't hang if the slave disconnects because the + // serial line will float to high if the slave does disconnect. + while (!serial_read_pin()); + serial_delay(); +} + +// Used by the slave to send a synchronization signal to the master. +static +void sync_send(void) { + serial_output(); + + serial_low(); + serial_delay(); + + serial_high(); +} + +// Reads a byte from the serial line +static +uint8_t serial_read_byte(void) { + uint8_t byte = 0; + serial_input(); + for ( uint8_t i = 0; i < 8; ++i) { + byte = (byte << 1) | serial_read_pin(); + serial_delay(); + _delay_us(1); + } + + return byte; +} + +// Sends a byte with MSB ordering +static +void serial_write_byte(uint8_t data) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(data & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +// interrupt handle to be used by the slave device +ISR(SERIAL_PIN_INTERRUPT) { + sync_send(); + + uint8_t checksum = 0; + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_slave_buffer[i]); + sync_send(); + checksum += serial_slave_buffer[i]; + } + serial_write_byte(checksum); + sync_send(); + + // wait for the sync to finish sending + serial_delay(); + + // read the middle of pulses + _delay_us(SERIAL_DELAY/2); + + uint8_t checksum_computed = 0; + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_master_buffer[i] = serial_read_byte(); + sync_send(); + checksum_computed += serial_master_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_send(); + + serial_input(); // end transaction + + if ( checksum_computed != checksum_received ) { + status |= SLAVE_DATA_CORRUPT; + } else { + status &= ~SLAVE_DATA_CORRUPT; + } +} + +inline +bool serial_slave_DATA_CORRUPT(void) { + return status & SLAVE_DATA_CORRUPT; +} + +// Copies the serial_slave_buffer to the master and sends the +// serial_master_buffer to the slave. +// +// Returns: +// 0 => no error +// 1 => slave did not respond +int serial_update_buffers(void) { + // this code is very time dependent, so we need to disable interrupts + cli(); + + // signal to the slave that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(1); + + // wait for the slaves response + serial_input(); + serial_high(); + _delay_us(SERIAL_DELAY); + + // check if the slave is present + if (serial_read_pin()) { + // slave failed to pull the line low, assume not present + sei(); + return 1; + } + + // if the slave is present syncronize with it + sync_recv(); + + uint8_t checksum_computed = 0; + // receive data from the slave + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_slave_buffer[i] = serial_read_byte(); + sync_recv(); + checksum_computed += serial_slave_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_recv(); + + if (checksum_computed != checksum_received) { + sei(); + return 1; + } + + uint8_t checksum = 0; + // send data to the slave + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_master_buffer[i]); + sync_recv(); + checksum += serial_master_buffer[i]; + } + serial_write_byte(checksum); + sync_recv(); + + // always, release the line when not in use + serial_output(); + serial_high(); + + sei(); + return 0; +} + +#endif diff --git a/keyboards/minidox/serial.h b/keyboards/minidox/serial.h new file mode 100644 index 0000000000..15fe4db7b4 --- /dev/null +++ b/keyboards/minidox/serial.h @@ -0,0 +1,26 @@ +#ifndef MY_SERIAL_H +#define MY_SERIAL_H + +#include "config.h" +#include <stdbool.h> + +/* TODO: some defines for interrupt setup */ +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_INPUT PIND +#define SERIAL_PIN_MASK _BV(PD0) +#define SERIAL_PIN_INTERRUPT INT0_vect + +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH 1 + +// Buffers for master - slave communication +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); +bool serial_slave_data_corrupt(void); + +#endif diff --git a/keyboards/minidox/split_util.c b/keyboards/minidox/split_util.c new file mode 100644 index 0000000000..39639c3b4b --- /dev/null +++ b/keyboards/minidox/split_util.c @@ -0,0 +1,84 @@ +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/power.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <avr/eeprom.h> +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else +# include "serial.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { +#ifdef USE_I2C + i2c_master_init(); +#ifdef SSD1306OLED + matrix_master_OLED_init (); +#endif +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { +#ifdef USE_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1<<VBUS)); //checks state of VBUS +} + +void split_keyboard_setup(void) { + setup_handedness(); + + if (has_usb()) { + keyboard_master_setup(); + } else { + keyboard_slave_setup(); + } + sei(); +} + +void keyboard_slave_loop(void) { + matrix_init(); + + while (1) { + matrix_slave_scan(); + } +} + +// this code runs before the usb and keyboard is initialized +void matrix_setup(void) { + split_keyboard_setup(); + + if (!has_usb()) { + keyboard_slave_loop(); + } +} diff --git a/keyboards/minidox/split_util.h b/keyboards/minidox/split_util.h new file mode 100644 index 0000000000..595a0659e1 --- /dev/null +++ b/keyboards/minidox/split_util.h @@ -0,0 +1,20 @@ +#ifndef SPLIT_KEYBOARD_UTIL_H +#define SPLIT_KEYBOARD_UTIL_H + +#include <stdbool.h> +#include "eeconfig.h" + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); +void keyboard_slave_loop(void); + +void matrix_master_OLED_init (void); + +#endif diff --git a/keyboards/mitosis/readme.md b/keyboards/mitosis/readme.md index 70755e32ac..ef1eb0d832 100644 --- a/keyboards/mitosis/readme.md +++ b/keyboards/mitosis/readme.md @@ -1,33 +1,24 @@ -Mitosis Keyboard Firmware -====================== +Mitosis +======= -These configuration files were based off the Atreus keyboard. It assumes a Pro Micro is being used, however retains the 'make upload' feature from the Atreus branch. This keyboard uses a completely different 'matrix scan' system to other keyboards, it relies on an external nRF51822 microcontroller maintaining a matrix of keystates received from the keyboard halves. The matrix.c file contains the code to poll the external microcontroller for the key matrix. As long as this file is not changed, all other QMK features are supported. - -Build log of the keyboard can be found [here](https://www.reddit.com/r/MechanicalKeyboards/comments/66588f/wireless_split_qmk_mitosis/) +A wireless split compact keyboard. -Hardware design files can be found [here](https://github.com/reversebias/mitosis-hardware) - -Firmware for the nordic MCUs can be found [here](https://github.com/reversebias/mitosis) +Keyboard Maintainer: [@reversebias](https://github.com/reversebias] +Hardware Supported: Mitosis PCB +Hardware Availability: https://www.reddit.com/r/MechanicalKeyboards/comments/66588f/wireless_split_qmk_mitosis/ -## Quantum MK Firmware +Make example for this keyboard (after setting up your build environment): -For the full Quantum feature list, see [the parent readme](/). + make mitosis-default -## Building +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. -Download or clone the whole firmware and navigate to the keyboards/atreus folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. +## Mitosis Notes -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build with the default keymap, simply run `make default`. +These configuration files were based off the Atreus keyboard. It assumes a Pro Micro is being used, however retains the 'make upload' feature from the Atreus branch. This keyboard uses a completely different 'matrix scan' system to other keyboards, it relies on an external nRF51822 microcontroller maintaining a matrix of keystates received from the keyboard halves. The matrix.c file contains the code to poll the external microcontroller for the key matrix. As long as this file is not changed, all other QMK features are supported. -### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. +Build log of the keyboard can be found [here](https://www.reddit.com/r/MechanicalKeyboards/comments/66588f/wireless_split_qmk_mitosis/) -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: +Hardware design files can be found [here](https://github.com/reversebias/mitosis-hardware) -``` -$ make [default|jack|<name>] -``` -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. +Firmware for the nordic MCUs can be found [here](https://github.com/reversebias/mitosis) diff --git a/keyboards/miuni32/readme.md b/keyboards/miuni32/readme.md index 36696ddbcb..3f3ddc8dfb 100644 --- a/keyboards/miuni32/readme.md +++ b/keyboards/miuni32/readme.md @@ -1,28 +1,14 @@ -miuni32 keyboard firmware -====================== +miuni32 +======= -## Quantum MK Firmware +A compact 30% keyboard. -For the full Quantum feature list, see [the parent readme](/). +Keyboard Maintainer: QMK Community +Hardware Supported: miuni32 PCB +Hardware Availability: https://zealpc.net/products/miuni32 -## Building +Make example for this keyboard (after setting up your build environment): -Download or clone the whole firmware and navigate to the keyboards/miuni32 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + make miuni32-default -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` - -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/nyquist/eeprom-lefthand.eep b/keyboards/nyquist/eeprom-lefthand.eep new file mode 100644 index 0000000000..b9666a74c0 --- /dev/null +++ b/keyboards/nyquist/eeprom-lefthand.eep @@ -0,0 +1,2 @@ +:0B0000000000000000000000000001F4
+:00000001FF
diff --git a/keyboards/nyquist/eeprom-righthand.eep b/keyboards/nyquist/eeprom-righthand.eep new file mode 100644 index 0000000000..94cc5be7fc --- /dev/null +++ b/keyboards/nyquist/eeprom-righthand.eep @@ -0,0 +1,2 @@ +:0B0000000000000000000000000000F5
+:00000001FF
diff --git a/keyboards/nyquist/keymaps/333fred/Makefile b/keyboards/nyquist/keymaps/333fred/Makefile new file mode 100644 index 0000000000..f854432807 --- /dev/null +++ b/keyboards/nyquist/keymaps/333fred/Makefile @@ -0,0 +1,7 @@ +KEY_LOCK_ENABLE = yes +NKRO_ENABLE = yes +CONSOLE_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/nyquist/keymaps/333fred/README.md b/keyboards/nyquist/keymaps/333fred/README.md new file mode 100644 index 0000000000..4276591415 --- /dev/null +++ b/keyboards/nyquist/keymaps/333fred/README.md @@ -0,0 +1,75 @@ +# 333fred's Nyquist Layout + +This nyquist layout is based on my Ergodox Infinity Layout, which is [here](../../../ergodox/keymaps/333fred/README.md). It doesn't have all of my VS extensions, as I have my nyquist at home, not at work. + +## Layers + +### QWERTY +The shift modifiers on this layer all use OSM to allow for quick single capitalization. Press and hold F to go to the VIM movement layer. Layer is also a one-shot layer toggle, and can be held down to type multiple characters on the Lower layer. Game is a regular toggle layer. + +``` +Qwerty +,-----------------------------------------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Tab | Q | W | E | R | T | Y | U | I | O | P | \ | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Esc | A | S | D |LTVIMF| G | H | J | K | L | ; | " | +|------+------+------+------+------+------|------+------+------+------+------+------| +| Shift| Z | X | C | V | B | N | M | , | . |/ Ctrl| Shift| +|------+------+------+------+------+------+------+------+------+------+------+------| +| Ctrl | Alt | F4 | GUI |Lower | Bksp | Spc | Ent | Lock | = | Game | Del | +`-----------------------------------------------------------------------------------' +``` + +### Lower +My symbol and numpad layer. APscr is a macro that sends ALT+PRSC, to take a screenshot of the current application. + +``` +Lower +,-----------------------------------------------------------------------------------. +| Caps | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | +|------+------+------+------+------+-------------+------+------+------+------+------| +| | ! | @ | ( | ) | | | 7 | 8 | 9 | * | ) | F12 | +|------+------+------+------+------+-------------+------+------+------+------+------| +| | # | $ | { | } | ` | 4 | 5 | 6 | + | } | | | +|------+------+------+------+------+------|------+------+------+------+------+------| +| APscr| % | ^ | [ | ] | ~ | 1 | 2 | 3 | \ | Vol- | Vol+ | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Pscr | | | | | | 0 | . | = | Prev | Next | Play | +`-----------------------------------------------------------------------------------' +``` + +### VIM Movement +Pressing and holding F moves to this layer, which turns hjkl into vim movement keys. a and d are macros which send WIN+Left and WIN+Right, respectively. Shift and CTRL have been remapped for ease of selecting text. +``` +Vim Movement (Hold down F) +,-----------------------------------------------------------------------------------. +| | | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | DLeft|DRight| LCTRL| | | Left | Down | Up | Right| | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | LShft| | | | | | | | +`-----------------------------------------------------------------------------------' + ``` + +### Gaming +This layer is designed for playing games. All one-shot modification has been turned off, and the common game controls keys have been moved around for easier access. +``` +Gaming mode (Raise) +,-----------------------------------------------------------------------------------. +| ESC | | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| CTRL | | | | F | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Shift| Z | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Enter| | Lock | | Alt | Spc | Lower| Left | Up | Down | Right|QWERTY| +`-----------------------------------------------------------------------------------' +``` diff --git a/keyboards/nyquist/keymaps/333fred/config.h b/keyboards/nyquist/keymaps/333fred/config.h new file mode 100644 index 0000000000..86fe521654 --- /dev/null +++ b/keyboards/nyquist/keymaps/333fred/config.h @@ -0,0 +1,14 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define USE_SERIAL +#define MASTER_LEFT + +#undef TAPPING_TERM +#define TAPPING_TERM 150 + +#define PERMISSIVE_HOLD + +#endif diff --git a/keyboards/nyquist/keymaps/333fred/keymap.c b/keyboards/nyquist/keymaps/333fred/keymap.c new file mode 100644 index 0000000000..2edfeefe7b --- /dev/null +++ b/keyboards/nyquist/keymaps/333fred/keymap.c @@ -0,0 +1,135 @@ +#include "nyquist.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _QWERTY 0 +#define _LOWER 1 +#define _VIM 2 +#define _GAME 3 + +enum custom_macros { + DLEFT, + DRIGHT, + PSCREEN_APP +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | \ | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D |LTVIMF| G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . |/ Ctrl| Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | F4 | GUI |Lower | Bksp | Spc | Ent | Alt | + | Game | Del | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLASH, \ + KC_ESC, KC_A, KC_S, KC_D, LT(_VIM, KC_F), KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + OSM(MOD_LSFT), LCTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RCTL_T(KC_SLSH), OSM(MOD_RSFT), \ + KC_LCTL, KC_LALT, KC_F4, KC_LGUI, OSL(_LOWER), KC_BSPC, KC_SPC, KC_ENT, KC_LOCK, KC_EQL, TG(_GAME), KC_DEL \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | ! | @ | ( | ) | | | 7 | 8 | 9 | * | ) | F12 | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | # | $ | { | } | ` | 4 | 5 | 6 | + | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | APscr| % | ^ | [ | ] | ~ | 1 | 2 | 3 | \ | Vol- | Vol+ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Pscr | | | | | | 0 | . | = | Prev | Next | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( \ + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, \ + _______, KC_EXLM, KC_AT, KC_LPRN, KC_RPRN, KC_PIPE, KC_7, KC_8, KC_9, KC_ASTR, KC_RPRN, KC_F12, \ + _______, KC_HASH, KC_DLR, KC_LCBR, KC_RCBR, KC_GRV, KC_4, KC_5, KC_6, KC_PLUS, KC_RCBR, KC_PIPE, \ + M(PSCREEN_APP), KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_1, KC_2, KC_3, KC_BSLS, KC_VOLD, KC_VOLU, \ + KC_PSCR, _______, _______, _______, _______, _______, KC_0, KC_DOT, KC_EQL, KC_MPRV, KC_MNXT, KC_MPLY \ +), + +/* Vim Movement (Hold down F) + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | DLeft|DRight| LCTRL| | | Left | Down | Up | Right| | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | LShft| | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_VIM] = KEYMAP( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, M(DLEFT), M(DRIGHT), KC_LCTL, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, KC_LSFT, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* Gaming mode (Raise) + * All one-shot mods are disabled on this layer + * ,-----------------------------------------------------------------------------------. + * | ESC | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | CTRL | | | | F | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Enter| | Lock | | Alt | Spc | Lower| Left | Up | Down | Right|QWERTY| + * `-----------------------------------------------------------------------------------' + */ +[_GAME] = KEYMAP( \ + KC_ESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + KC_LCTL, _______, _______, _______, KC_F, _______, _______, _______, _______, _______, _______, _______, \ + KC_LSFT, KC_Z, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + KC_ENT, _______, KC_LOCK, _______, KC_LALT, KC_SPC, OSL(_LOWER), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TO(_QWERTY) \ +) + +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch(id) { + case DLEFT: + if (record->event.pressed) { // Windows move desktop left + return MACRO(D(LCTL), D(LGUI), T(LEFT), U(LGUI), U(LCTL), END); + } + break; + case DRIGHT: + if (record->event.pressed) { // Windows move desktop right + return MACRO(D(LCTL), D(LGUI), T(RIGHT), U(LGUI), U(LCTL), END); + } + break; + case PSCREEN_APP: + if (record->event.pressed) { + return MACRO(D(LALT), T(PSCR), U(LALT), END); + } + break; + } + return MACRO_NONE; +} diff --git a/keyboards/nyquist/keymaps/default/Makefile b/keyboards/nyquist/keymaps/default/Makefile index 457a3d01d4..1e57612788 100644 --- a/keyboards/nyquist/keymaps/default/Makefile +++ b/keyboards/nyquist/keymaps/default/Makefile @@ -1,3 +1,5 @@ +RGBLIGHT_ENABLE = yes + ifndef QUANTUM_DIR include ../../../../Makefile endif diff --git a/keyboards/nyquist/keymaps/default/config.h b/keyboards/nyquist/keymaps/default/config.h index 624d284cac..072d4a7ce2 100644 --- a/keyboards/nyquist/keymaps/default/config.h +++ b/keyboards/nyquist/keymaps/default/config.h @@ -31,4 +31,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define _MASTER_RIGHT // #define EE_HANDS +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + #endif
\ No newline at end of file diff --git a/keyboards/nyquist/keymaps/default/keymap.c b/keyboards/nyquist/keymaps/default/keymap.c index dcb68a6e06..97fee4e1e2 100644 --- a/keyboards/nyquist/keymaps/default/keymap.c +++ b/keyboards/nyquist/keymaps/default/keymap.c @@ -139,7 +139,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | Reset| | | | | | | | | | Del | + * | | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn| | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | * |------+------+------+------+------+------|------+------+------+------+------+------| @@ -150,7 +150,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = KEYMAP( \ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, KC_DEL, \ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ diff --git a/keyboards/nyquist/matrix.c b/keyboards/nyquist/matrix.c index dcb94c67c8..21eef94564 100644 --- a/keyboards/nyquist/matrix.c +++ b/keyboards/nyquist/matrix.c @@ -21,9 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <stdint.h> #include <stdbool.h> #include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> +#include "wait.h" #include "print.h" #include "debug.h" #include "util.h" @@ -31,6 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "split_util.h" #include "pro_micro.h" #include "config.h" +#include "timer.h" #ifdef USE_I2C # include "i2c.h" @@ -38,14 +37,29 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # include "serial.h" #endif -#ifndef DEBOUNCE -# define DEBOUNCE 5 +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 #endif +#if (DEBOUNCING_DELAY > 0) + static uint16_t debouncing_time; + static bool debouncing = false; +#endif + +#if (MATRIX_COLS <= 8) +# define print_matrix_header() print("\nr/c 01234567\n") +# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop(matrix[i]) +# define ROW_SHIFTER ((uint8_t)1) +#else +# error "Currently only supports 8 COLS" +#endif +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + #define ERROR_DISCONNECT_COUNT 5 -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; +#define ROWS_PER_HAND (MATRIX_ROWS/2) + static uint8_t error_count = 0; static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; @@ -55,11 +69,19 @@ static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - +#if (DIODE_DIRECTION == COL2ROW) + static void init_cols(void); + static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); + static void unselect_rows(void); + static void select_row(uint8_t row); + static void unselect_row(uint8_t row); +#elif (DIODE_DIRECTION == ROW2COL) + static void init_rows(void); + static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); + static void unselect_cols(void); + static void unselect_col(uint8_t col); + static void select_col(uint8_t col); +#endif __attribute__ ((weak)) void matrix_init_quantum(void) { matrix_init_kb(); @@ -118,33 +140,54 @@ void matrix_init(void) } matrix_init_quantum(); + } uint8_t _matrix_scan(void) { - // Right hand is stored after the left in the matirx so, we need to offset it int offset = isLeftHand ? 0 : (ROWS_PER_HAND); +#if (DIODE_DIRECTION == COL2ROW) + // Set row, read cols + for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { +# if (DEBOUNCING_DELAY > 0) + bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); + + if (matrix_changed) { + debouncing = true; + debouncing_time = timer_read(); + PORTD ^= (1 << 2); + } + +# else + read_cols_on_row(matrix+offset, current_row); +# endif + + } + +#elif (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { +# if (DEBOUNCING_DELAY > 0) + bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); + if (matrix_changed) { + debouncing = true; + debouncing_time = timer_read(); + } +# else + read_rows_on_col(matrix+offset, current_col); +# endif - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); } +#endif - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { +# if (DEBOUNCING_DELAY > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } + debouncing = false; } - } +# endif return 1; } @@ -200,9 +243,7 @@ int serial_transaction(void) { uint8_t matrix_scan(void) { - int ret = _matrix_scan(); - - + uint8_t ret = _matrix_scan(); #ifdef USE_I2C if( i2c_transaction() ) { @@ -233,11 +274,10 @@ uint8_t matrix_scan(void) void matrix_slave_scan(void) { _matrix_scan(); - int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; #ifdef USE_I2C for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ i2c_slave_buffer[i] = matrix[offset+i]; } #else // USE_SERIAL @@ -284,33 +324,141 @@ uint8_t matrix_key_count(void) return count; } -static void init_cols(void) +#if (DIODE_DIRECTION == COL2ROW) + +static void init_cols(void) { - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + uint8_t pin = col_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI } } -static matrix_row_t read_cols(void) +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[current_row]; + + // Clear data in matrix row + current_matrix[current_row] = 0; + + // Select row and wait for row selecton to stabilize + select_row(current_row); + wait_us(30); + + // For each col... + for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + + // Select the col pin to read (active low) + uint8_t pin = col_pins[col_index]; + uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); + + // Populate the matrix row with the state of the col pin + current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); } - return result; + + // Unselect row + unselect_row(current_row); + + return (last_row_value != current_matrix[current_row]); +} + +static void select_row(uint8_t row) +{ + uint8_t pin = row_pins[row]; + _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT + _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW +} + +static void unselect_row(uint8_t row) +{ + uint8_t pin = row_pins[row]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI } static void unselect_rows(void) { - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { + uint8_t pin = row_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI } } -static void select_row(uint8_t row) +#elif (DIODE_DIRECTION == ROW2COL) + +static void init_rows(void) +{ + for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { + uint8_t pin = row_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) +{ + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + wait_us(30); + + // For each row... + for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) + { + + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) + { + // Pin LO, set col bit + current_matrix[row_index] |= (ROW_SHIFTER << current_col); + } + else + { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) + { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +static void select_col(uint8_t col) +{ + uint8_t pin = col_pins[col]; + _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT + _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW +} + +static void unselect_col(uint8_t col) +{ + uint8_t pin = col_pins[col]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI +} + +static void unselect_cols(void) { - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + uint8_t pin = col_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } } + +#endif diff --git a/keyboards/nyquist/pro_micro.h b/keyboards/nyquist/pro_micro.h deleted file mode 100644 index f9e7ed75d9..0000000000 --- a/keyboards/nyquist/pro_micro.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include <avr/pgmspace.h> - -// Workaround for wrong definitions in "iom32u4.h". -// This should be fixed in the AVR toolchain. -#undef UHCON -#undef UHINT -#undef UHIEN -#undef UHADDR -#undef UHFNUM -#undef UHFNUML -#undef UHFNUMH -#undef UHFLEN -#undef UPINRQX -#undef UPINTX -#undef UPNUM -#undef UPRST -#undef UPCONX -#undef UPCFG0X -#undef UPCFG1X -#undef UPSTAX -#undef UPCFG2X -#undef UPIENX -#undef UPDATX -#undef TCCR2A -#undef WGM20 -#undef WGM21 -#undef COM2B0 -#undef COM2B1 -#undef COM2A0 -#undef COM2A1 -#undef TCCR2B -#undef CS20 -#undef CS21 -#undef CS22 -#undef WGM22 -#undef FOC2B -#undef FOC2A -#undef TCNT2 -#undef TCNT2_0 -#undef TCNT2_1 -#undef TCNT2_2 -#undef TCNT2_3 -#undef TCNT2_4 -#undef TCNT2_5 -#undef TCNT2_6 -#undef TCNT2_7 -#undef OCR2A -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 -#undef OCR2B -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 - -#define NUM_DIGITAL_PINS 30 -#define NUM_ANALOG_INPUTS 12 - -#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) - -static const uint8_t SDA = 2; -static const uint8_t SCL = 3; -#define LED_BUILTIN 13 - -// Map SPI port to 'new' pins D14..D17 -static const uint8_t SS = 17; -static const uint8_t MOSI = 16; -static const uint8_t MISO = 14; -static const uint8_t SCK = 15; - -// Mapping of analog pins as digital I/O -// A6-A11 share with digital pins -static const uint8_t ADC0 = 18; -static const uint8_t ADC1 = 19; -static const uint8_t ADC2 = 20; -static const uint8_t ADC3 = 21; -static const uint8_t ADC4 = 22; -static const uint8_t ADC5 = 23; -static const uint8_t ADC6 = 24; // D4 -static const uint8_t ADC7 = 25; // D6 -static const uint8_t ADC8 = 26; // D8 -static const uint8_t ADC9 = 27; // D9 -static const uint8_t ADC10 = 28; // D10 -static const uint8_t ADC11 = 29; // D12 - -#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) 0 -#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) -#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) - -// __AVR_ATmega32U4__ has an unusual mapping of pins to channels -extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; -#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) - -#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA32U4 / ARDUINO LEONARDO -// -// D0 PD2 RXD1/INT2 -// D1 PD3 TXD1/INT3 -// D2 PD1 SDA SDA/INT1 -// D3# PD0 PWM8/SCL OC0B/SCL/INT0 -// D4 A6 PD4 ADC8 -// D5# PC6 ??? OC3A/#OC4A -// D6# A7 PD7 FastPWM #OC4D/ADC10 -// D7 PE6 INT6/AIN0 -// -// D8 A8 PB4 ADC11/PCINT4 -// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 -// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 -// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 -// D12 A11 PD6 T1/#OC4D/ADC9 -// D13# PC7 PWM10 CLK0/OC4A -// -// A0 D18 PF7 ADC7 -// A1 D19 PF6 ADC6 -// A2 D20 PF5 ADC5 -// A3 D21 PF4 ADC4 -// A4 D22 PF1 ADC1 -// A5 D23 PF0 ADC0 -// -// New pins D14..D17 to map SPI port to digital pins -// -// MISO D14 PB3 MISO,PCINT3 -// SCK D15 PB1 SCK,PCINT1 -// MOSI D16 PB2 MOSI,PCINT2 -// SS D17 PB0 RXLED,SS/PCINT0 -// -// Connected LEDs on board for TX and RX -// TXLED D24 PD5 XCK1 -// RXLED D17 PB0 -// HWB PE2 HWB - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, // D0 - PD2 - PD, // D1 - PD3 - PD, // D2 - PD1 - PD, // D3 - PD0 - PD, // D4 - PD4 - PC, // D5 - PC6 - PD, // D6 - PD7 - PE, // D7 - PE6 - - PB, // D8 - PB4 - PB, // D9 - PB5 - PB, // D10 - PB6 - PB, // D11 - PB7 - PD, // D12 - PD6 - PC, // D13 - PC7 - - PB, // D14 - MISO - PB3 - PB, // D15 - SCK - PB1 - PB, // D16 - MOSI - PB2 - PB, // D17 - SS - PB0 - - PF, // D18 - A0 - PF7 - PF, // D19 - A1 - PF6 - PF, // D20 - A2 - PF5 - PF, // D21 - A3 - PF4 - PF, // D22 - A4 - PF1 - PF, // D23 - A5 - PF0 - - PD, // D24 - PD5 - PD, // D25 / D6 - A7 - PD7 - PB, // D26 / D8 - A8 - PB4 - PB, // D27 / D9 - A9 - PB5 - PB, // D28 / D10 - A10 - PB6 - PD, // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(2), // D0 - PD2 - _BV(3), // D1 - PD3 - _BV(1), // D2 - PD1 - _BV(0), // D3 - PD0 - _BV(4), // D4 - PD4 - _BV(6), // D5 - PC6 - _BV(7), // D6 - PD7 - _BV(6), // D7 - PE6 - - _BV(4), // D8 - PB4 - _BV(5), // D9 - PB5 - _BV(6), // D10 - PB6 - _BV(7), // D11 - PB7 - _BV(6), // D12 - PD6 - _BV(7), // D13 - PC7 - - _BV(3), // D14 - MISO - PB3 - _BV(1), // D15 - SCK - PB1 - _BV(2), // D16 - MOSI - PB2 - _BV(0), // D17 - SS - PB0 - - _BV(7), // D18 - A0 - PF7 - _BV(6), // D19 - A1 - PF6 - _BV(5), // D20 - A2 - PF5 - _BV(4), // D21 - A3 - PF4 - _BV(1), // D22 - A4 - PF1 - _BV(0), // D23 - A5 - PF0 - - _BV(5), // D24 - PD5 - _BV(7), // D25 / D6 - A7 - PD7 - _BV(4), // D26 / D8 - A8 - PB4 - _BV(5), // D27 / D9 - A9 - PB5 - _BV(6), // D28 / D10 - A10 - PB6 - _BV(6), // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER0B, /* 3 */ - NOT_ON_TIMER, - TIMER3A, /* 5 */ - TIMER4D, /* 6 */ - NOT_ON_TIMER, - - NOT_ON_TIMER, - TIMER1A, /* 9 */ - TIMER1B, /* 10 */ - TIMER0A, /* 11 */ - - NOT_ON_TIMER, - TIMER4A, /* 13 */ - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { - 7, // A0 PF7 ADC7 - 6, // A1 PF6 ADC6 - 5, // A2 PF5 ADC5 - 4, // A3 PF4 ADC4 - 1, // A4 PF1 ADC1 - 0, // A5 PF0 ADC0 - 8, // A6 D4 PD4 ADC8 - 10, // A7 D6 PD7 ADC10 - 11, // A8 D8 PB4 ADC11 - 12, // A9 D9 PB5 ADC12 - 13, // A10 D10 PB6 ADC13 - 9 // A11 D12 PD6 ADC9 -}; - -#endif /* ARDUINO_MAIN */ - -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_USBVIRTUAL Serial -#define SERIAL_PORT_HARDWARE Serial1 -#define SERIAL_PORT_HARDWARE_OPEN Serial1 - -#endif /* Pins_Arduino_h */ diff --git a/keyboards/nyquist/readme.md b/keyboards/nyquist/readme.md index c70bf02576..16debb9870 100644 --- a/keyboards/nyquist/readme.md +++ b/keyboards/nyquist/readme.md @@ -1,167 +1,20 @@ -The Nyquist Keyboard -==================== +Nyquist +======= -The Nyquist is a 60% split ortholinear board by [Keebio](https://keeb.io). It has been designed in a similar manner to the Let's Split v2 by /u/wootpatoot. Each half of the keyboard is arranged in a 5x6 grid. There is an option to use a 2u key with PCB mounted MX stablizers, in place of the two innermost 1u keys on the bottom row. +A split 60% split 5x12 ortholinear keyboard made and sold by Keebio. [More info at Keebio](https://keeb.io). +Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges) +Hardware Supported: Pro Micro +Hardware Availability: [Keebio](https://keeb.io) -## Build Guide +Make example for this keyboard (after setting up your build environment): -Since the design is very similar to the Let's Split v2, the build guide for that can be used while the build guide for the Nyquist is being fully developed. A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide) + make nyquist-rev1-default -There is additional information there about flashing and adding RGB underglow. +Example of flashing this keyboard: -## First Time Setup + make nyquist-rev1-default-avrdude -Download or clone the whole firmware and navigate to the keyboards/nyquist directory. Once your development environment is setup, you'll be able to generate the default .hex using: +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. -``` -$ make serial -``` - -You will see a lot of output and if everything worked correctly you will see the built hex file: - -``` -nyquist_rev1_serial.hex -``` - -If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: - - -``` -$ make YOUR_KEYMAP_NAME -``` - -If everything worked correctly you will see a file: - -``` -nyquist_rev1_YOUR_KEYMAP_NAME.hex -``` - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. - -Features --------- - -For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). - -Some features supported by the firmware: - -* Either half can connect to the computer via USB, or both halves can be used - independently. -* You only need 3 wires to connect the two halves. Two for VCC and GND and one - for serial communication. -* Optional support for I2C connection between the two halves if for some - reason you require a faster connection between the two halves. Note this - requires an extra wire between halves and pull-up resistors on the data lines. - -### 2u Support -In place of the two innermost 1u keys on the bottom row, a single 2u key can be used. If you choose to use this option, then in your keymap, set the innermost key on the bottom row to what you want the 2u key to be. For example, if using the 2u key on the left half of the board, set the keycode for the lower right key. - -Required Hardware ------------------ - -Apart from diodes and key switches for the keyboard matrix in each half, you -will need: - -* 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each. -* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable - -Alternatively, you can use any sort of cable and socket that has at least 3 -wires. If you want to use I2C to communicate between halves, you will need a -cable with at least 4 wires and 2x 4.7kΩ pull-up resistors - -Optional Hardware ------------------ - -A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. - -Wiring ------- - -The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. -PD0 on the ATmega32u4) between the two Pro Micros. - -Then wire your key matrix to any of the remaining 17 IO pins of the pro micro -and modify the `matrix.c` accordingly. - -The wiring for serial: - -![serial wiring](http://imgur.com/BnCGU1Y) - -The wiring for i2c: - -![i2c wiring](http://imgur.com/5eiArDA) - -The pull-up resistors may be placed on either half. It is also possible -to use 4 resistors and have the pull-ups in both halves, but this is -unnecessary in simple use cases. - -Flashing -------- -From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. -Example: `make rev1-serial-avrdude` - - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) - -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. - -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. - - -Notes on Using Pro Micro 3.3V ------------------------------ - -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. - -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: - -``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. -``` +A build guide for this keyboard can be found here: [Nyquist Build Guide](https://docs.keeb.io) diff --git a/keyboards/nyquist/rules.mk b/keyboards/nyquist/rules.mk index dfcff1d902..3f40ff2f82 100644 --- a/keyboards/nyquist/rules.mk +++ b/keyboards/nyquist/rules.mk @@ -73,15 +73,3 @@ USE_I2C = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [[ -z $$USB ]]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/nyquist/split_util.c b/keyboards/nyquist/split_util.c index 39639c3b4b..346cbc9089 100644 --- a/keyboards/nyquist/split_util.c +++ b/keyboards/nyquist/split_util.c @@ -8,6 +8,7 @@ #include "matrix.h" #include "keyboard.h" #include "config.h" +#include "timer.h" #ifdef USE_I2C # include "i2c.h" @@ -42,6 +43,7 @@ static void keyboard_master_setup(void) { } static void keyboard_slave_setup(void) { + timer_init(); #ifdef USE_I2C i2c_slave_init(SLAVE_I2C_ADDRESS); #else diff --git a/keyboards/org60/Makefile b/keyboards/org60/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/org60/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/org60/config.h b/keyboards/org60/config.h new file mode 100644 index 0000000000..62b3b69a0e --- /dev/null +++ b/keyboards/org60/config.h @@ -0,0 +1,82 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER 大橘子外设 (Large orange peripherals) +#define PRODUCT Org60 +#define DESCRIPTION Org60 Keyboard PCB by 大橘子外设 (Large orange peripherals) + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* Backlight Setup */ +#define BACKLIGHT_PIN F5 +#define BACKLIGHT_LEVELS 6 +//#define BACKLIGHT_BREATHING + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* RGB Underglow + * F6 PIN for Org60 that has pre-soldered WS2812 LEDs + */ +#define RGB_DI_PIN F6 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 20 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#define TAPPING_TERM 200 + +#endif diff --git a/keyboards/org60/keymaps/boardy/Makefile b/keyboards/org60/keymaps/boardy/Makefile new file mode 100644 index 0000000000..0755d50093 --- /dev/null +++ b/keyboards/org60/keymaps/boardy/Makefile @@ -0,0 +1,15 @@ + +# QMK Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +CONSOLE_ENABLE = no # Enable debugging console +COMMAND_ENABLE = no # Commands for debug and configuration +TAP_DANCE_ENABLE = no # Tap Dance skills +UNICODE_ENABLE = no # Unicode + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + + diff --git a/keyboards/org60/keymaps/boardy/keymap.c b/keyboards/org60/keymaps/boardy/keymap.c new file mode 100644 index 0000000000..635838f6cf --- /dev/null +++ b/keyboards/org60/keymaps/boardy/keymap.c @@ -0,0 +1,121 @@ +#include "org60.h" +#include "action_layer.h" + +// Keyboard Layers +enum keyboard_layers { + _BASE, // Base Layer + _FUNCTION, // Function Layer +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BASE] = KEYMAP( + /* + 0: Base Layer + .--------------------------------------------------------------------------------------------------------------------------------------. + | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | _ | + | | + | | | | | | | | | | | | | | | + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Backspace | + |--------------------------------------------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | { | ] | | | + | | | | | | | | | | | | | | | + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + |--------------------------------------------------------------------------------------------------------------------------------------| + | | | | | | | | | | | : | " | | + | | | | | | | | | | | | | | + | PrntScr | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + |--------------------------------------------------------------------------------------------------------------------------------------| + | | | | | | | | | < | > | ? |░░░░░░| |░░░░░░░░| + | | | | | | | | | | | |░░░░░░| |░░░░░░░░| + | Shift | Z | X | C | V | B | N | M | , | . | / |░░░░░░| Up |░░░░░░░░| + |--------------------------------------------------------------------------------------------------------------------------------------| + | | | | | |░░░░░░| | | | + | | | | | |░░░░░░| | | | + | Ctrl | Win | Alt | Space | FnO |░░░░░░| Left | Down | Right | + '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + //--------------------------------------------------------------------------------------------------------------------------------------. + // | | | | | | | | | | | | | | + // | | | | | | | | | | | | | | + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, + //--------------------------------------------------------------------------------------------------------------------------------------| + // | | | | | | | | | | | | | | + // | | | | | | | | | | | | | | + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + //--------------------------------------------------------------------------------------------------------------------------------------| + // | | | | | | | | | | | | | + // | | | | | | | | | | | | | + KC_PSCR, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, + //--------------------------------------------------------------------------------------------------------------------------------------| + // | | | | | | | | | | |░░░░░░| |░░░░░░░░| + // | | | | | | | | | | |░░░░░░| |░░░░░░░░| + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_UP, KC_NO, + //--------------------------------------------------------------------------------------------------------------------------------------| + // | | | | |░░░░░░| | | | + // | | | | |░░░░░░| | | | + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, F(0), KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT), + //--------------------------------------------------------------------------------------------------------------------------------------' + + + [_FUNCTION] = KEYMAP( + /* + 1: Function Layer + .--------------------------------------------------------------------------------------------------------------------------------------. + | | | | | | | | | | | | | | | + | | | | | | | | | | | | | | | + | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Delete | + |--------------------------------------------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | + | | | | | RGB | RGB | RGB | RGB | | | | | | | + | Reset | 7 | 8 | 9 | Toggle | Mode | Pwr+ | Pwr- | | Insert | Pause | Home | End | Sleep | + |--------------------------------------------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | + | | | | | RGB | RGB | RGB | RGB | | | Page | Page | | + | Caps Lock | 4 | 5 | 6 | Hue+ | Hue- | Sat+ | Sat- | | | Up | Down | Enter | + |--------------------------------------------------------------------------------------------------------------------------------------| + | | | | | | | | | | | |░░░░░░| |░░░░░░░░| + | | | | | | Back | Back | | Prev | Next | |░░░░░░| |░░░░░░░░| + | Shift | 1 | 2 | 3 | | Light+ | Light- | | Track | Track | |░░░░░░| Up |░░░░░░░░| + |--------------------------------------------------------------------------------------------------------------------------------------| + | | | | | |░░░░░░| | | | + | | | | | |░░░░░░| | | | + | Ctrl | Win | Alt | 0 | Fn0 |░░░░░░| Mute | Down | Right | + '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + //--------------------------------------------------------------------------------------------------------------------------------------. + // | | | | | | | | | | | | | | + // | | | | | | | | | | | | | | + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_NO, + //--------------------------------------------------------------------------------------------------------------------------------------| + // | | | | | | | | | | | | | | + // | | | | | | | | | | | | | | + RESET, KC_7, KC_8, KC_9, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, KC_NO, KC_INS, KC_PAUS, KC_HOME, KC_END, KC_SLEP, + //--------------------------------------------------------------------------------------------------------------------------------------| + // | | | | | | | | | | | | | + // | | | | | | | | | | | | | + KC_CAPS, KC_4, KC_5, KC_6, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_NO, KC_NO, KC_PGUP, KC_PGDN, KC_NO, KC_ENT, + //--------------------------------------------------------------------------------------------------------------------------------------| + // | | | | | | | | | | |░░░░░░| |░░░░░░░░| + // | | | | | | | | | | |░░░░░░| |░░░░░░░░| + KC_LSFT, KC_NO, KC_1, KC_2, KC_3, KC_NO, BL_INC, BL_DEC, KC_NO, KC_MPRV, KC_MNXT, KC_NO, KC_NO, KC_VOLU, KC_NO, + //--------------------------------------------------------------------------------------------------------------------------------------| + // | | | | |░░░░░░| | | | + // | | | | |░░░░░░| | | | + KC_LCTL, KC_LGUI, KC_LALT, KC_0, F(0), KC_NO, KC_MUTE, KC_VOLD, KC_MPLY), + //--------------------------------------------------------------------------------------------------------------------------------------' + +}; + + +// Custom Actions +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(_FUNCTION), // to Function overlay +}; + + +// Loop +void matrix_scan_user(void) { + // Empty +};
\ No newline at end of file diff --git a/keyboards/org60/keymaps/boardy/readme.md b/keyboards/org60/keymaps/boardy/readme.md new file mode 100644 index 0000000000..3643fbce30 --- /dev/null +++ b/keyboards/org60/keymaps/boardy/readme.md @@ -0,0 +1,7 @@ +# Boardy layout + +![Uses this layout](http://i.imgur.com/k3g488o.jpg) + +This is my custom layout for my board Boardy designed to be used with an [Org60] and custom plate. + +[Org60]: https://world.taobao.com/item/544441405112.htm diff --git a/keyboards/org60/keymaps/default/keymap.c b/keyboards/org60/keymaps/default/keymap.c new file mode 100644 index 0000000000..9d18d50e31 --- /dev/null +++ b/keyboards/org60/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +#include "org60.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // 0: Base Layer + KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC , KC_NO, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_NO, KC_RSFT ,KC_UP, KC_DEL, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT), + + // 1: Function Layer + KEYMAP( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \ + KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \ + KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP,KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_RSFT, KC_NO ,KC_PGUP, KC_INS, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END), + +}; + +// Custom Actions +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; + +// Macros +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { register_code(KC_RSFT); } + else { unregister_code(KC_RSFT); } + break; + } + + return MACRO_NONE; +}; + +// Loop +void matrix_scan_user(void) { + // Empty +};
\ No newline at end of file diff --git a/keyboards/org60/keymaps/default/readme.md b/keyboards/org60/keymaps/default/readme.md new file mode 100644 index 0000000000..89f9acaa97 --- /dev/null +++ b/keyboards/org60/keymaps/default/readme.md @@ -0,0 +1,5 @@ +![Uses this layout](https://i.redd.it/v64eqwsrk8jx.jpg) + +All of the keys which CAN have a function should be assigned one. + +The keys with KC_NO cannot be assigned a value diff --git a/keyboards/org60/org60.c b/keyboards/org60/org60.c new file mode 100644 index 0000000000..77a5e7c18b --- /dev/null +++ b/keyboards/org60/org60.c @@ -0,0 +1,19 @@ +#include "org60.h" + + +extern inline void org60_caps_led_on(void); +extern inline void org60_bl_led_on(void); + +extern inline void org60_caps_led_off(void); +extern inline void org60_bl_led_off(void); + + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + org60_caps_led_on(); + } else { + org60_caps_led_off(); + } + + led_set_user(usb_led); +} diff --git a/keyboards/org60/org60.h b/keyboards/org60/org60.h new file mode 100644 index 0000000000..7c10043429 --- /dev/null +++ b/keyboards/org60/org60.h @@ -0,0 +1,37 @@ +#ifndef Org60_H +#define Org60_H + +#include "quantum.h" +#include "led.h" + +/* Org60 LEDs + * GPIO pads + * 0 F7 not connected + * 1 F6 RGB PWM Underglow + * 2 F5 Backlight LED + * 3 F4 not connected + * B2 Capslock LED + * B0 not connected + */ +inline void org60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); } +inline void org60_bl_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); } + +inline void org60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); } +inline void org60_bl_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } + +/* Org60 Keymap Definition Macro */ +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K47, K3D, K3C, \ + K40, K41, K42, K45, K4A, K4B, K48, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO,KC_NO,K45, KC_NO,K47, K48, K49, K4A, K4B, K4C, K4D } \ +} + +#endif diff --git a/keyboards/org60/readme.md b/keyboards/org60/readme.md new file mode 100644 index 0000000000..8e02a40211 --- /dev/null +++ b/keyboards/org60/readme.md @@ -0,0 +1,21 @@ +# QMK Firmware for 大橘子外设 (Large Orange Peripheral)'s 60% Org60 PCB + +![Top View of a pair of XD60 Keyboards (same layout as Org60)](https://i.imgur.com/3Jq2743.jpg) + + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + + +## Additional Notes +The Org60 seems to be a variant of the XD60 (which is essentially a GH60 rev. C, with support for a right-hand arrow cluster), which has USB-C and built-in RGB underlighting. + +Compatibility with GH60 expansion boards is unknown. + +Board also supports in-switch LEDs (two-pin, single colour), as well as WS2182 LED strips for underglow lighting. + +Default keymap included, matching configuration on sale page. + + +## Build +To build the default keymap, simply run `make org60-default`.
\ No newline at end of file diff --git a/keyboards/org60/rules.mk b/keyboards/org60/rules.mk new file mode 100644 index 0000000000..566ac0cb88 --- /dev/null +++ b/keyboards/org60/rules.mk @@ -0,0 +1,64 @@ +# MCU name +MCU = atmega32u4 + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# LUFA specific +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +AUDIO_ENABLE = no # Audio output on port C6 +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +COMMAND_ENABLE = no # Commands for debug and configuration +CONSOLE_ENABLE = no # Console for debug(+400) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +MIDI_ENABLE = no # MIDI controls +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +UNICODE_ENABLE = no # Unicode diff --git a/keyboards/orthodox/pro_micro.h b/keyboards/orthodox/pro_micro.h deleted file mode 100644 index f9e7ed75d9..0000000000 --- a/keyboards/orthodox/pro_micro.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include <avr/pgmspace.h> - -// Workaround for wrong definitions in "iom32u4.h". -// This should be fixed in the AVR toolchain. -#undef UHCON -#undef UHINT -#undef UHIEN -#undef UHADDR -#undef UHFNUM -#undef UHFNUML -#undef UHFNUMH -#undef UHFLEN -#undef UPINRQX -#undef UPINTX -#undef UPNUM -#undef UPRST -#undef UPCONX -#undef UPCFG0X -#undef UPCFG1X -#undef UPSTAX -#undef UPCFG2X -#undef UPIENX -#undef UPDATX -#undef TCCR2A -#undef WGM20 -#undef WGM21 -#undef COM2B0 -#undef COM2B1 -#undef COM2A0 -#undef COM2A1 -#undef TCCR2B -#undef CS20 -#undef CS21 -#undef CS22 -#undef WGM22 -#undef FOC2B -#undef FOC2A -#undef TCNT2 -#undef TCNT2_0 -#undef TCNT2_1 -#undef TCNT2_2 -#undef TCNT2_3 -#undef TCNT2_4 -#undef TCNT2_5 -#undef TCNT2_6 -#undef TCNT2_7 -#undef OCR2A -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 -#undef OCR2B -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 - -#define NUM_DIGITAL_PINS 30 -#define NUM_ANALOG_INPUTS 12 - -#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) - -static const uint8_t SDA = 2; -static const uint8_t SCL = 3; -#define LED_BUILTIN 13 - -// Map SPI port to 'new' pins D14..D17 -static const uint8_t SS = 17; -static const uint8_t MOSI = 16; -static const uint8_t MISO = 14; -static const uint8_t SCK = 15; - -// Mapping of analog pins as digital I/O -// A6-A11 share with digital pins -static const uint8_t ADC0 = 18; -static const uint8_t ADC1 = 19; -static const uint8_t ADC2 = 20; -static const uint8_t ADC3 = 21; -static const uint8_t ADC4 = 22; -static const uint8_t ADC5 = 23; -static const uint8_t ADC6 = 24; // D4 -static const uint8_t ADC7 = 25; // D6 -static const uint8_t ADC8 = 26; // D8 -static const uint8_t ADC9 = 27; // D9 -static const uint8_t ADC10 = 28; // D10 -static const uint8_t ADC11 = 29; // D12 - -#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) 0 -#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) -#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) - -// __AVR_ATmega32U4__ has an unusual mapping of pins to channels -extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; -#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) - -#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA32U4 / ARDUINO LEONARDO -// -// D0 PD2 RXD1/INT2 -// D1 PD3 TXD1/INT3 -// D2 PD1 SDA SDA/INT1 -// D3# PD0 PWM8/SCL OC0B/SCL/INT0 -// D4 A6 PD4 ADC8 -// D5# PC6 ??? OC3A/#OC4A -// D6# A7 PD7 FastPWM #OC4D/ADC10 -// D7 PE6 INT6/AIN0 -// -// D8 A8 PB4 ADC11/PCINT4 -// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 -// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 -// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 -// D12 A11 PD6 T1/#OC4D/ADC9 -// D13# PC7 PWM10 CLK0/OC4A -// -// A0 D18 PF7 ADC7 -// A1 D19 PF6 ADC6 -// A2 D20 PF5 ADC5 -// A3 D21 PF4 ADC4 -// A4 D22 PF1 ADC1 -// A5 D23 PF0 ADC0 -// -// New pins D14..D17 to map SPI port to digital pins -// -// MISO D14 PB3 MISO,PCINT3 -// SCK D15 PB1 SCK,PCINT1 -// MOSI D16 PB2 MOSI,PCINT2 -// SS D17 PB0 RXLED,SS/PCINT0 -// -// Connected LEDs on board for TX and RX -// TXLED D24 PD5 XCK1 -// RXLED D17 PB0 -// HWB PE2 HWB - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, // D0 - PD2 - PD, // D1 - PD3 - PD, // D2 - PD1 - PD, // D3 - PD0 - PD, // D4 - PD4 - PC, // D5 - PC6 - PD, // D6 - PD7 - PE, // D7 - PE6 - - PB, // D8 - PB4 - PB, // D9 - PB5 - PB, // D10 - PB6 - PB, // D11 - PB7 - PD, // D12 - PD6 - PC, // D13 - PC7 - - PB, // D14 - MISO - PB3 - PB, // D15 - SCK - PB1 - PB, // D16 - MOSI - PB2 - PB, // D17 - SS - PB0 - - PF, // D18 - A0 - PF7 - PF, // D19 - A1 - PF6 - PF, // D20 - A2 - PF5 - PF, // D21 - A3 - PF4 - PF, // D22 - A4 - PF1 - PF, // D23 - A5 - PF0 - - PD, // D24 - PD5 - PD, // D25 / D6 - A7 - PD7 - PB, // D26 / D8 - A8 - PB4 - PB, // D27 / D9 - A9 - PB5 - PB, // D28 / D10 - A10 - PB6 - PD, // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(2), // D0 - PD2 - _BV(3), // D1 - PD3 - _BV(1), // D2 - PD1 - _BV(0), // D3 - PD0 - _BV(4), // D4 - PD4 - _BV(6), // D5 - PC6 - _BV(7), // D6 - PD7 - _BV(6), // D7 - PE6 - - _BV(4), // D8 - PB4 - _BV(5), // D9 - PB5 - _BV(6), // D10 - PB6 - _BV(7), // D11 - PB7 - _BV(6), // D12 - PD6 - _BV(7), // D13 - PC7 - - _BV(3), // D14 - MISO - PB3 - _BV(1), // D15 - SCK - PB1 - _BV(2), // D16 - MOSI - PB2 - _BV(0), // D17 - SS - PB0 - - _BV(7), // D18 - A0 - PF7 - _BV(6), // D19 - A1 - PF6 - _BV(5), // D20 - A2 - PF5 - _BV(4), // D21 - A3 - PF4 - _BV(1), // D22 - A4 - PF1 - _BV(0), // D23 - A5 - PF0 - - _BV(5), // D24 - PD5 - _BV(7), // D25 / D6 - A7 - PD7 - _BV(4), // D26 / D8 - A8 - PB4 - _BV(5), // D27 / D9 - A9 - PB5 - _BV(6), // D28 / D10 - A10 - PB6 - _BV(6), // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER0B, /* 3 */ - NOT_ON_TIMER, - TIMER3A, /* 5 */ - TIMER4D, /* 6 */ - NOT_ON_TIMER, - - NOT_ON_TIMER, - TIMER1A, /* 9 */ - TIMER1B, /* 10 */ - TIMER0A, /* 11 */ - - NOT_ON_TIMER, - TIMER4A, /* 13 */ - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { - 7, // A0 PF7 ADC7 - 6, // A1 PF6 ADC6 - 5, // A2 PF5 ADC5 - 4, // A3 PF4 ADC4 - 1, // A4 PF1 ADC1 - 0, // A5 PF0 ADC0 - 8, // A6 D4 PD4 ADC8 - 10, // A7 D6 PD7 ADC10 - 11, // A8 D8 PB4 ADC11 - 12, // A9 D9 PB5 ADC12 - 13, // A10 D10 PB6 ADC13 - 9 // A11 D12 PD6 ADC9 -}; - -#endif /* ARDUINO_MAIN */ - -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_USBVIRTUAL Serial -#define SERIAL_PORT_HARDWARE Serial1 -#define SERIAL_PORT_HARDWARE_OPEN Serial1 - -#endif /* Pins_Arduino_h */ diff --git a/keyboards/orthodox/readme.md b/keyboards/orthodox/readme.md index 57e940b0f4..e1fbf94baf 100644 --- a/keyboards/orthodox/readme.md +++ b/keyboards/orthodox/readme.md @@ -96,7 +96,7 @@ the two halves, i.e. if your split keyboard has 3 rows in each half, then Flashing ------- -From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. +From the `orthodox` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. Example: `make rev2-default-avrdude` diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk index dfcff1d902..3f40ff2f82 100644 --- a/keyboards/orthodox/rules.mk +++ b/keyboards/orthodox/rules.mk @@ -73,15 +73,3 @@ USE_I2C = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [[ -z $$USB ]]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/orthodox/ssd1306.c b/keyboards/orthodox/ssd1306.c deleted file mode 100644 index 5c6dff27f8..0000000000 --- a/keyboards/orthodox/ssd1306.c +++ /dev/null @@ -1,470 +0,0 @@ -#ifdef SSD1306OLED - -#include "ssd1306.h" -#include "config.h" -#include "i2c.h" -#include <string.h> -#include "print.h" -#include "lets_split.h" -#include "common/glcdfont.c" -#ifdef ADAFRUIT_BLE_ENABLE -#include "adafruit_ble.h" -#endif -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "pincontrol.h" - -//assign the right code to your layers -#define _BASE 0 -#define _LOWER 8 -#define _RAISE 16 -#define _FNLAYER 64 -#define _NUMLAY 128 -#define _NLOWER 136 -#define _NFNLAYER 192 -#define _MOUSECURSOR 256 -#define _ADJUST 65560 - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -// Controls the SSD1306 128x32 OLED display via i2c - -#define i2cAddress 0x3C - -#define DisplayHeight 32 -#define DisplayWidth 128 - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -static struct CharacterMatrix display; -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ -#define ScreenOffInterval 300000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(i2cAddress)) { - xprintf("failed to start write to %d\n", i2cAddress); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void matrix_clear(struct CharacterMatrix *matrix); - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(i2cAddress)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(void) { - bool success = false; - - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - -/// Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); -/* -// the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); -// end flip */ - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -static void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -static void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -static void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(i2cAddress)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1)); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -static void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -static void render_status_info(void) { -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - struct CharacterMatrix matrix; - - matrix_clear(&matrix); - matrix_write_P(&matrix, PSTR("USB: ")); -#ifdef PROTOCOL_LUFA - switch (USB_DeviceState) { - case DEVICE_STATE_Unattached: - matrix_write_P(&matrix, PSTR("Unattached")); - break; - case DEVICE_STATE_Suspended: - matrix_write_P(&matrix, PSTR("Suspended")); - break; - case DEVICE_STATE_Configured: - matrix_write_P(&matrix, PSTR("Connected")); - break; - case DEVICE_STATE_Powered: - matrix_write_P(&matrix, PSTR("Powered")); - break; - case DEVICE_STATE_Default: - matrix_write_P(&matrix, PSTR("Default")); - break; - case DEVICE_STATE_Addressed: - matrix_write_P(&matrix, PSTR("Addressed")); - break; - default: - matrix_write_P(&matrix, PSTR("Invalid")); - } -#endif - -// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(&matrix, PSTR("\n\nLayer: ")); - switch (layer_state) { - case _BASE: - matrix_write_P(&matrix, PSTR("Default")); - break; - case _RAISE: - matrix_write_P(&matrix, PSTR("Raise")); - break; - case _LOWER: - matrix_write_P(&matrix, PSTR("Lower")); - break; - case _ADJUST: - matrix_write_P(&matrix, PSTR("ADJUST")); - break; - default: - matrix_write(&matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(&matrix, led); - matrix_update(&display, &matrix); -} - -void iota_gfx_task(void) { - render_status_info(); - - if (display.dirty) { - iota_gfx_flush(); - } - - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } -} -#endif diff --git a/keyboards/orthodox/ssd1306.h b/keyboards/orthodox/ssd1306.h deleted file mode 100644 index b0c74f987e..0000000000 --- a/keyboards/orthodox/ssd1306.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef SSD1306_H -#define SSD1306_H - -#include <stdbool.h> -#include <stdio.h> - -bool iota_gfx_init(void); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -#endif diff --git a/keyboards/pegasushoof/README.md b/keyboards/pegasushoof/README.md index 074222c714..c4c152d401 100644 --- a/keyboards/pegasushoof/README.md +++ b/keyboards/pegasushoof/README.md @@ -1,24 +1,12 @@ -pegasushoof keyboard firmware -============================= +Pegasus Hoof Controller +=== -## Quantum MK Firmware +Keyboard Maintainer: QMK Community +Hardware Supported: Pegasus Hoof +Hardware Availability: https://1upkeyboards.com/filco-pegasus-hoof-controller.html -For the full Quantum feature list, see [the parent README.md](/README.md). +Make example for this keyboard (after setting up your build environment): -## Building + make pegasus_hoof-default -Download or clone the whole firmware and navigate to the `keyboard/pegasushoof` folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your `.hex` file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build all keymaps, simply run `make`, the `.hex` files will end up in the top directory. - -### Specific Keymap -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>/keymap.c` in the `keymaps` folder, and see keymap document (you can find in top README.md) and existent keymap files. - -To build the firmware binary hex file with a keymap just enter the keymap directory and type `make`: -``` -$ cd keymaps/default -$ make -``` +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/phantom/readme.md b/keyboards/phantom/readme.md index 614c21fda0..7a31d106e0 100644 --- a/keyboards/phantom/readme.md +++ b/keyboards/phantom/readme.md @@ -1,48 +1,16 @@ -Phantom keyboard firmware -========================= +Phantom +======= A community-developed keyboard PCB designed to fit inside the case of a Filco Majestouch. See the [Deskthority wiki](https://deskthority.net/wiki/Phantom) for more information. -## Bootloader +Keyboard Maintainer: QMK Community +Hardware Supported: Phantom PCB +Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=536 -The Phantom uses a [Teensy 2.0](https://www.pjrc.com/store/teensy.html) as a controller. +Make example for this keyboard (after setting up your build environment): -The Teensy has a special bootloader that can be accessed by pressing the button on the Teensy PCB. It is also possible to use Boot Magic and Command to access the bootloader. + make phantom-default -To write the firmware to the Teensy use [Teensy loader](https://www.pjrc.com/teensy/loader.html). - -## Quantum MK Firmware - -For the full Quantum feature list, see the [documentation](https://docs.qmk.fm). - -## RGB underlight - -It is possible to connect a WS2812B LED strip to the Teensy for RGB underlight support. - -For this to work the DIN connection on the WS2812B strip should be soldered to PE2 on the Teensy (see reference image https://i.imgur.com/aDfNoHT.jpg). - -See [rgbmod](keymaps/rgbmod) for a keymap that utilizes the RGB underlight feature. - -## Building - -The Phantom allows for a huge amount of different layouts. - -Depending on which layout and keymap you would like to use, you will have to compile the firmware slightly differently. All of the commands should be run in the [keyboards/phantom](/keyboards/phantom) folder. - -### Custom keymaps - -To define your own keymap, copy one of the [existing keymap](keymaps) folders and give it the name of your keymap. Then check the [keymap documentation](https://docs.qmk.fm/Keymap.html) for details on how to modify the keymap. - -To make it easy to define keymaps for the most common layouts a few macros are provided. - -| Layout | Macro | -| --------------- | ------------------------- | -| Winkey ANSI | `KEYMAP()` | -| Winkeyless ANSI | `KEYMAP_WINKEYLESS()` | -| Winkey ISO | `KEYMAP_ISO()` | -| Winkeyless ISO | `KEYMAP_ISO_WINKEYLESS()` | -| 7BIT | `KEYMAP_7BIT()` | - -To build the firmware with a custom keymap, run `make <keymap name>` +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/planck/keymaps/coloneljesus/Makefile b/keyboards/planck/keymaps/coloneljesus/Makefile new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/keyboards/planck/keymaps/coloneljesus/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/coloneljesus/config.h b/keyboards/planck/keymaps/coloneljesus/config.h new file mode 100644 index 0000000000..b406e2fed9 --- /dev/null +++ b/keyboards/planck/keymaps/coloneljesus/config.h @@ -0,0 +1,42 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#endif + +#define MUSIC_MASK (keycode != KC_NO) + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/coloneljesus/keymap.c b/keyboards/planck/keymaps/coloneljesus/keymap.c new file mode 100644 index 0000000000..668da5c103 --- /dev/null +++ b/keyboards/planck/keymaps/coloneljesus/keymap.c @@ -0,0 +1,261 @@ +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "planck.h" +#include "action_layer.h" + +extern keymap_config_t keymap_config; + +enum planck_layers { + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | GUI | Alt | App |Lower | Space |Raise | - | = | \ | Alt | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RSFT_T(KC_ENT) }, + {KC_LCTL, KC_LGUI, KC_LALT, KC_APP, LOWER, KC_SPC, KC_SPC, RAISE, KC_MINS, KC_EQL, KC_BSLS, KC_RALT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | { | } | Del | Home | PgDn | PgUp | End | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | F6 |ISO ~ |ISO | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Mute | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {_______, _______, _______, KC_LCBR, KC_RCBR, KC_DEL, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______}, + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, S(KC_NUHS), S(KC_NUBS), KC_MPRV, KC_MNXT, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | [ | ] | Del | Left | Down | Up | Right| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Mute | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {_______, _______, _______, KC_LBRC, KC_RBRC, KC_DEL, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MPRV, KC_MNXT, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL }, + {_______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + float plover_song[][2] = SONG(PLOVER_SOUND); + float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); +#endif + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(plover_song); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(plover_gb_song); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/planck/keymaps/coloneljesus/readme.md b/keyboards/planck/keymaps/coloneljesus/readme.md new file mode 100644 index 0000000000..31107f59ce --- /dev/null +++ b/keyboards/planck/keymaps/coloneljesus/readme.md @@ -0,0 +1,2 @@ +# /u/Coloneljesus's Planck Layout + diff --git a/keyboards/planck/keymaps/default/config.h b/keyboards/planck/keymaps/default/config.h index 4c61581993..b406e2fed9 100644 --- a/keyboards/planck/keymaps/default/config.h +++ b/keyboards/planck/keymaps/default/config.h @@ -3,6 +3,18 @@ #include "../../config.h" +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#endif + +#define MUSIC_MASK (keycode != KC_NO) + /* * MIDI options */ @@ -13,6 +25,7 @@ /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ + #define MIDI_BASIC /* enable advanced MIDI features: diff --git a/keyboards/planck/keymaps/default/keymap.c b/keyboards/planck/keymaps/default/keymap.c index 61275cb26a..f71a2b59b9 100644 --- a/keyboards/planck/keymaps/default/keymap.c +++ b/keyboards/planck/keymaps/default/keymap.c @@ -1,20 +1,24 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include "planck.h" #include "action_layer.h" -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#include "eeconfig.h" extern keymap_config_t keymap_config; -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - enum planck_layers { _QWERTY, _COLEMAK, @@ -36,10 +40,6 @@ enum planck_keycodes { EXT_PLV }; -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Qwerty @@ -164,7 +164,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = { {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL }, - {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} } @@ -173,50 +173,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef AUDIO_ENABLE - -float tone_startup[][2] = SONG(STARTUP_SOUND); -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); -float tone_plover[][2] = SONG(PLOVER_SOUND); -float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); - -float tone_goodbye[][2] = SONG(GOODBYE_SOUND); + float plover_song[][2] = SONG(PLOVER_SOUND); + float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); #endif - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case QWERTY: if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); - #endif - persistent_default_layer_set(1UL<<_QWERTY); + set_single_persistent_default_layer(_QWERTY); } return false; break; case COLEMAK: if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, 0); - #endif - persistent_default_layer_set(1UL<<_COLEMAK); + set_single_persistent_default_layer(_COLEMAK); } return false; break; case DVORAK: if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, 0); - #endif - persistent_default_layer_set(1UL<<_DVORAK); + set_single_persistent_default_layer(_DVORAK); } return false; break; @@ -255,7 +232,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { #ifdef AUDIO_ENABLE stop_all_notes(); - PLAY_NOTE_ARRAY(tone_plover, false, 0); + PLAY_SONG(plover_song); #endif layer_off(_RAISE); layer_off(_LOWER); @@ -273,7 +250,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case EXT_PLV: if (record->event.pressed) { #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + PLAY_SONG(plover_gb_song); #endif layer_off(_PLOVER); } @@ -281,37 +258,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; } return true; -} - -void matrix_init_user(void) { - #ifdef AUDIO_ENABLE - startup_user(); - #endif -} - -#ifdef AUDIO_ENABLE - -void startup_user() -{ - _delay_ms(20); // gets rid of tick - PLAY_NOTE_ARRAY(tone_startup, false, 0); -} - -void shutdown_user() -{ - PLAY_NOTE_ARRAY(tone_goodbye, false, 0); - _delay_ms(150); - stop_all_notes(); -} - -void music_on_user(void) -{ - music_scale_user(); -} - -void music_scale_user(void) -{ - PLAY_NOTE_ARRAY(music_scale, false, 0); -} - -#endif +}
\ No newline at end of file diff --git a/keyboards/planck/keymaps/experimental/Makefile b/keyboards/planck/keymaps/experimental/Makefile index 3a8250a9b5..29108e522b 100644 --- a/keyboards/planck/keymaps/experimental/Makefile +++ b/keyboards/planck/keymaps/experimental/Makefile @@ -1,11 +1,11 @@ # Build Options -# change to "no" to disable the options, or define them in the Makefile in +# change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration @@ -17,6 +17,7 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. ONEHAND_ENABLE = yes # Enable one-hand typing +STENO_ENABLE = yes # Enable TX Bolt protocol for Stenography, requires VIRTSER and may not work with mouse keys # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/planck/keymaps/experimental/config.h b/keyboards/planck/keymaps/experimental/config.h index 492490ca1c..0864b5fbc9 100644 --- a/keyboards/planck/keymaps/experimental/config.h +++ b/keyboards/planck/keymaps/experimental/config.h @@ -5,6 +5,7 @@ #define LEADER_TIMEOUT 300 #define BACKLIGHT_BREATHING +#define PREVENT_STUCK_MODIFIERS /* ws2812 RGB LED */ diff --git a/keyboards/planck/keymaps/experimental/keymap.c b/keyboards/planck/keymaps/experimental/keymap.c index 17fad784e7..2d648b211a 100644 --- a/keyboards/planck/keymaps/experimental/keymap.c +++ b/keyboards/planck/keymaps/experimental/keymap.c @@ -3,6 +3,7 @@ #include "planck.h" #include "action_layer.h" +#include "keymap_steno.h" #ifdef AUDIO_ENABLE #include "audio.h" #endif @@ -49,7 +50,7 @@ enum planck_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = { - {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}, + {QWERTY, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}, {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}, {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}, {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL} @@ -158,10 +159,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_PLOVER] = { - {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, - {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, - {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, - {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} + {STN_N1, STN_N2, STN_N3, STN_N4, STN_N5, STN_N6, STN_N7, STN_N8, STN_N9, STN_NA, STN_NB, STN_NC }, + {STN_FN, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR }, + {XXXXXXX, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR }, + {EXT_PLV, XXXXXXX, XXXXXXX, STN_A, STN_O, XXXXXXX, XXXXXXX, STN_E, STN_U, STN_PWR, STN_RE1, STN_RE2} }, /* Adjust (Lower + Raise) @@ -279,21 +280,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; return false; case PLOVER: - if (record->event.pressed) { + if (!record->event.pressed) { #ifdef AUDIO_ENABLE stop_all_notes(); PLAY_NOTE_ARRAY(tone_plover, false, 0); #endif - layer_off(_RAISE); - layer_off(_LOWER); - layer_off(_ADJUST); layer_on(_PLOVER); - if (!eeconfig_is_enabled()) { - eeconfig_init(); - } - keymap_config.raw = eeconfig_read_keymap(); - keymap_config.nkro = 1; - eeconfig_update_keymap(keymap_config.raw); } break; return false; @@ -397,9 +389,9 @@ void music_scale_user(void) LEADER_EXTERNS(); void matrix_scan_user(void) { - LEADER_DICTIONARY() { + LEADER_DICTIONARY() { leading = false; - leader_end(); + leader_end(); SEQ_ONE_KEY (KC_R) { tap_random_base64(); diff --git a/keyboards/planck/keymaps/piemod/Makefile b/keyboards/planck/keymaps/piemod/Makefile new file mode 100755 index 0000000000..1e48872e39 --- /dev/null +++ b/keyboards/planck/keymaps/piemod/Makefile @@ -0,0 +1,10 @@ +SUBPROJECT_DEFAULT = rev4 + +MOUSEKEY_ENABLE = yes +BLUETOOTH_ENABLE = yes +EXTRAKEY_ENABLE = yes +AUDIO_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/piemod/README.md b/keyboards/planck/keymaps/piemod/README.md new file mode 100644 index 0000000000..f2a051da14 --- /dev/null +++ b/keyboards/planck/keymaps/piemod/README.md @@ -0,0 +1,31 @@ +PieMod +====== + +A keymap for users that need: + +- *P*: Programming symbols. + +- *I*: i3wm. + +- *E*: Emacs. + +- *M*: Macros. + +- *O*: Ortholinear. + +- *D*: Dvorak. + +Still a work-in-progress. Suggestions welcome @ https://github.com/dwrz/piemod. + +### Keymap + +![PieMod Keymap](./keymap.png) + +### TODO + +- [ ] Add Emacs layer. +- [ ] Add Macro layer. +- [ ] Add system control keys (rotation, brightness). +- [ ] Switch " and ' quotes (or function to toggle default). +- [ ] Add capslock. +. diff --git a/keyboards/planck/keymaps/piemod/keymap.c b/keyboards/planck/keymaps/piemod/keymap.c new file mode 100644 index 0000000000..e6e7a8a5a0 --- /dev/null +++ b/keyboards/planck/keymaps/piemod/keymap.c @@ -0,0 +1,111 @@ +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +#define DVORAK 0 +#define ARROW 1 //F(1) +#define SYMBOL 2 // F(2) +#define NUMBER 3 // F(3) +#define FUNCTION 4 // F(4) +#define EMACS 5 // F(5) +#define CUSTOM_MACROS 6 // F(6) +#define MOUSE 7 // F(7) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DVORAK] = { + {KC_ESC, KC_QUOTE, F(7), KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DELETE}, + {KC_TAB, F(1), F(2), F(3), F(4), KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENTER}, + {KC_LSHIFT, KC_SCOLON, F(5), KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_MINUS}, + {F(10), F(6), KC_MENU, KC_LALT, KC_LGUI, KC_BSPACE, KC_SPACE, KC_RCTRL, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT}, + }, + + [ARROW] = { + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_UP, KC_END, KC_PGUP}, + {KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO} + }, + + [SYMBOL] = { + {KC_TILD, KC_GRAVE, KC_NO, KC_EQUAL, KC_PLUS, KC_NO, KC_LBRACKET, KC_RBRACKET, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, + {KC_NO, KC_NO, KC_TRNS, KC_SCOLON, KC_COLN, KC_NO, KC_LCBR, KC_RCBR, KC_DLR, KC_PERC, KC_CIRC, F(21)}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BSLASH, KC_SLASH, KC_EXLM, KC_AT, KC_HASH, KC_PIPE}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ASTR, KC_SLASH, KC_MINUS, KC_PLUS, KC_EQUAL} + }, + + [NUMBER] = { + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_7, KC_8, KC_9, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_4, KC_5, KC_6, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_0, KC_1, KC_2, KC_3, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ASTR, KC_SLASH, KC_MINUS, KC_PLUS, KC_EQUAL} + }, + + [FUNCTION] = { + {KC_PSCREEN, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_MEDIA_PLAY_PAUSE}, + {RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DELETE, KC_INSERT, KC_HOME, KC_PGDN, KC_PGUP, KC_END} + }, + + [EMACS] = { + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO} + }, + + [CUSTOM_MACROS] = { + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO} + }, + + [MOUSE] = { + {KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_U, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_BTN1, KC_MS_BTN2, KC_MS_BTN3, KC_NO, KC_NO, KC_NO} + }, + + }; + + enum function_id { + TEENSY_KEY, + CUSTOM_KEY, + L_CTRL_ALT_ENT, + R_CTRL_ALT_ENT, + }; + + int CAPSLOCKED = 0; + + const uint16_t PROGMEM fn_actions[] = { + + // DVORAK 0 + // ARROW 1, F(1) + // SYMBOL 2, F(2) + // NUMBER 3, F(3) + // FUNCTION 4, F(4) + // EMACS 5, F(5) + // MACROS 6, F(6) + // MOUSE 7, F(7) + + // Layers + [1] = ACTION_LAYER_TAP_KEY(1, KC_A), // FN1 = Momentary Arrow layer on A. + [2] = ACTION_LAYER_TAP_KEY(2, KC_O), // FN2 = Momentary symbOl layer on O. + [3] = ACTION_LAYER_TAP_KEY(3, KC_E), // FN3 = Momentary numbEr layer on E. + [4] = ACTION_LAYER_TAP_KEY(4, KC_U), // FN4 = Momentary fUnction layer on U. + [5] = ACTION_LAYER_TAP_KEY(5, KC_Q), // FN5 = Momentary emaQs layer on Q. + [6] = ACTION_LAYER_TAP_KEY(6, KC_LCTRL), // FN6 = Momentary MACROS on ??? key. + [7] = ACTION_LAYER_TAP_KEY(7, KC_COMMA), // FN7 = Momentary MOUSE on , key. + + // Special Keys + [10] = ACTION_MODS_KEY(KC_LCTRL, KC_LALT), // FN10 = Ctrl + Alt. + + // Symbols + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_SLASH), // FN21 = Question mark. + + }; diff --git a/keyboards/planck/keymaps/priyadi/config.h b/keyboards/planck/keymaps/priyadi/config.h index adc1c69aa5..448ae3b908 100644 --- a/keyboards/planck/keymaps/priyadi/config.h +++ b/keyboards/planck/keymaps/priyadi/config.h @@ -23,7 +23,7 @@ #define DOUBLESPACE_LAYER_ENABLE // #define TOLELOT_ENABLE -#define KEYMAP( \ +#define KEYMAP_CUSTOM( \ k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ diff --git a/keyboards/planck/keymaps/rai-suta/Makefile b/keyboards/planck/keymaps/rai-suta/Makefile index 4263440ec1..38efe374cf 100644 --- a/keyboards/planck/keymaps/rai-suta/Makefile +++ b/keyboards/planck/keymaps/rai-suta/Makefile @@ -20,9 +20,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# Option defines -OPT_DEFS += -DJIS_KEYCODE - ifndef QUANTUM_DIR include ../../../../Makefile endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/rai-suta/keymap.c b/keyboards/planck/keymaps/rai-suta/keymap.c index 13fc3677e6..3206ffd35f 100644 --- a/keyboards/planck/keymaps/rai-suta/keymap.c +++ b/keyboards/planck/keymaps/rai-suta/keymap.c @@ -3,6 +3,8 @@ #include "planck.h" #include "version.h" +#include "sendstring_jis.h" + // Keycode defines #define _______ KC_TRNS #define XXXXXXX KC_NO diff --git a/keyboards/planck/keymaps/steno/Makefile b/keyboards/planck/keymaps/steno/Makefile new file mode 100644 index 0000000000..874154af63 --- /dev/null +++ b/keyboards/planck/keymaps/steno/Makefile @@ -0,0 +1,7 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +STENO_ENABLE = yes # Additional protocols for Stenography(+1700), requires VIRTSER +AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/planck/keymaps/steno/config.h b/keyboards/planck/keymaps/steno/config.h new file mode 100644 index 0000000000..1879ab007f --- /dev/null +++ b/keyboards/planck/keymaps/steno/config.h @@ -0,0 +1,44 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#endif + +#define MUSIC_MASK (keycode != KC_NO) + +#define PREVENT_STUCK_MODIFIERS + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/steno/keymap.c b/keyboards/planck/keymaps/steno/keymap.c new file mode 100644 index 0000000000..38540a2613 --- /dev/null +++ b/keyboards/planck/keymaps/steno/keymap.c @@ -0,0 +1,256 @@ +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "planck.h" +#include "action_layer.h" +#include "keymap_steno.h" + +extern keymap_config_t keymap_config; + +enum planck_layers { + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +#define ST_BOLT QK_STENO_BOLT +#define ST_GEM QK_STENO_GEMINI + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | FN | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | PWR | RES1 | RES2 | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {STN_N1, STN_N2, STN_N3, STN_N4, STN_N5, STN_N6, STN_N7, STN_N8, STN_N9, STN_NA, STN_NB, STN_NC }, + {STN_FN, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR }, + {XXXXXXX, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR }, + {EXT_PLV, XXXXXXX, XXXXXXX, STN_A, STN_O, XXXXXXX, XXXXXXX, STN_E, STN_U, STN_PWR, STN_RE1, STN_RE2} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | |TXBOLT|GEM RP| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL }, + {_______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, ST_BOLT, ST_GEM}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + float plover_song[][2] = SONG(PLOVER_SOUND); + float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); +#endif + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (!record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(plover_song); + #endif + layer_on(_PLOVER); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(plover_gb_song); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/planck/keymaps/steno/readme.md b/keyboards/planck/keymaps/steno/readme.md new file mode 100644 index 0000000000..e8ffd97565 --- /dev/null +++ b/keyboards/planck/keymaps/steno/readme.md @@ -0,0 +1,4 @@ +# The Default Planck Layout with TX Bolt for the Plover Layer + +To use set Plover to TX Bolt and select the COM port that represents your keyboard. + diff --git a/keyboards/planck/planck.h b/keyboards/planck/planck.h index 8cfee5d1cc..10f17b4a46 100644 --- a/keyboards/planck/planck.h +++ b/keyboards/planck/planck.h @@ -36,4 +36,6 @@ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ } +#define KEYMAP PLANCK_GRID + #endif diff --git a/keyboards/preonic/keymaps/default/config.h b/keyboards/preonic/keymaps/default/config.h index 4c61581993..003fd259c5 100644 --- a/keyboards/preonic/keymaps/default/config.h +++ b/keyboards/preonic/keymaps/default/config.h @@ -3,6 +3,18 @@ #include "../../config.h" +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#endif + +#define MUSIC_MASK (keycode != KC_NO) + /* * MIDI options */ @@ -13,6 +25,7 @@ /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ + #define MIDI_BASIC /* enable advanced MIDI features: diff --git a/keyboards/preonic/keymaps/default/keymap.c b/keyboards/preonic/keymaps/default/keymap.c index 2516a726bd..01f40542ca 100644 --- a/keyboards/preonic/keymaps/default/keymap.c +++ b/keyboards/preonic/keymaps/default/keymap.c @@ -1,14 +1,21 @@ +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + #include "preonic.h" #include "action_layer.h" -#include "eeconfig.h" -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. enum preonic_layers { _QWERTY, @@ -28,10 +35,6 @@ enum preonic_keycodes { BACKLIT }; -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Qwerty @@ -155,7 +158,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = { {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, - {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, + {_______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} } @@ -163,54 +166,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -#ifdef AUDIO_ENABLE -float tone_startup[][2] = { - {NOTE_B5, 20}, - {NOTE_B6, 8}, - {NOTE_DS6, 20}, - {NOTE_B6, 8} -}; - -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); - -float tone_goodbye[][2] = SONG(GOODBYE_SOUND); - -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); -#endif - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case QWERTY: if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); - #endif - persistent_default_layer_set(1UL<<_QWERTY); + set_single_persistent_default_layer(_QWERTY); } return false; break; case COLEMAK: if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, 0); - #endif - persistent_default_layer_set(1UL<<_COLEMAK); + set_single_persistent_default_layer(_COLEMAK); } return false; break; case DVORAK: if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, 0); - #endif - persistent_default_layer_set(1UL<<_DVORAK); + set_single_persistent_default_layer(_DVORAK); } return false; break; @@ -248,36 +220,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; }; - -void matrix_init_user(void) { - #ifdef AUDIO_ENABLE - startup_user(); - #endif -} - -#ifdef AUDIO_ENABLE - -void startup_user() -{ - _delay_ms(20); // gets rid of tick - PLAY_NOTE_ARRAY(tone_startup, false, 0); -} - -void shutdown_user() -{ - PLAY_NOTE_ARRAY(tone_goodbye, false, 0); - _delay_ms(150); - stop_all_notes(); -} - -void music_on_user(void) -{ - music_scale_user(); -} - -void music_scale_user(void) -{ - PLAY_NOTE_ARRAY(music_scale, false, 0); -} - -#endif diff --git a/keyboards/readme.md b/keyboards/readme.md index 9ee3fc7abc..5d72a2a413 100644 --- a/keyboards/readme.md +++ b/keyboards/readme.md @@ -57,3 +57,4 @@ These keyboards are part of the QMK repository, but their manufacturers are not * [TheVan 44](/keyboards/tv44) — A 44-key staggered keybard by Evangs. * [WhiteFox](/keyboards/whitefox) — A 65% keyboard designed as a partnership by matt3o, Massdrop and Input Club * [Vision Division](/keyboards/vision_division) — Full Size / Split Linear Keyboard by IBNobody. +* [XD75](/keyboards/xd75) — 15x5 ortholinear keyboard by XIUDI. diff --git a/keyboards/roadkit/keymaps/singlesBrent/Makefile b/keyboards/roadkit/keymaps/singlesBrent/Makefile new file mode 100644 index 0000000000..b61d6cca2c --- /dev/null +++ b/keyboards/roadkit/keymaps/singlesBrent/Makefile @@ -0,0 +1,22 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = yes # Enable Tap Dance functionality + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/singlesBrent/config.h b/keyboards/roadkit/keymaps/singlesBrent/config.h new file mode 100644 index 0000000000..57468e122a --- /dev/null +++ b/keyboards/roadkit/keymaps/singlesBrent/config.h @@ -0,0 +1,15 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here +#define TAPPING_TERM 175 + +#ifdef BACKLIGHT_ENABLE + #define BACKLIGHT_PIN B5 + #define BACKLIGHT_LEVELS 3 + #define BACKLIGHT_ON_STATE 0 +#endif + +#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/singlesBrent/keymap.c b/keyboards/roadkit/keymaps/singlesBrent/keymap.c new file mode 100644 index 0000000000..13197346a9 --- /dev/null +++ b/keyboards/roadkit/keymaps/singlesBrent/keymap.c @@ -0,0 +1,242 @@ +#include "roadkit.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _NP 0 +#define _L1 1 +#define _L2 2 +#define _L3 3 + +// Macro name shortcuts +#define NUMPAD M(_NP) +#define LAYER1 M(_L1) +#define LAYER2 M(_L2) +#define LAYER3 M(_L3) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +void matrix_init_user(void) { + backlight_level(4); +} + + + +//Tap Dance Declarations + +enum { + + TD_EQUAL_NP = 0, + TD_KP_PLUS_L1, + TD_DOT_L2, + TD_0_L3 + +}; + +//Tap Dance Definitions + + + //TD equal to turn on layer NP +void _td_equal_tg_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code(KC_EQUAL); + } else if (state->count == 2) { + backlight_set(3); + layer_on(_NP); + layer_off(_L1); + layer_off(_L2); + layer_off(_L3); + } +} + +void _td_equal_tg_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code(KC_EQUAL); + } +} + + + //TD kp plus to toggle layer 1 +void _td_kp_plus_tg_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code(KC_KP_PLUS); + } else if (state->count == 2) { +// layer_invert(_L1); + backlight_set(2); + layer_on(_L1); + layer_off(_L2); + layer_off(_L3); + } +} + +void _td_kp_plus_tg_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code(KC_KP_PLUS); + } +} + + + //TD dot to toggle layer 2 +void _td_dot_tg_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code(KC_DOT); + } else if (state->count == 2) { + backlight_set(1); + layer_on(_L2); + layer_off(_L1); + layer_off(_L3); + } +} + +void _td_dot_tg_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code(KC_DOT); + } +} + + //TD 0 to toggle layer 3 +void _td_0_tg_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code(KC_0); + } else if (state->count == 2) { + backlight_set(0); + layer_on(_L3); + layer_off(_L1); + layer_off(_L2); + } +} + +void _td_0_tg_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code(KC_0); + } +} + +//TD Actions +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_EQUAL_NP] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_equal_tg_finished, _td_equal_tg_reset), + [TD_KP_PLUS_L1] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_kp_plus_tg_finished, _td_kp_plus_tg_reset), + [TD_DOT_L2] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_dot_tg_finished, _td_dot_tg_reset), + [TD_0_L3] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_0_tg_finished, _td_0_tg_reset) +}; + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Numberpad + * ,-----------------------. + * | 7 | 8 | 9 | / | + * |-----`-----`-----`-----| + * | 4 | 5 | 6 | * | + * |-----`-----`-----`-----| + * | 1 | 2 | 3 | - | + * |-----`-----`-----`-----| + * | 0 | . | + | = | + * `-----`-----`-----`-----' + * Tapdances: + * | L3 | L2 | L1 | NP | + * `-----`-----`-----`-----' + */ + [_NP] = /* Numpad */ + SINGLES_KEYMAP(KC_7, KC_8, KC_9, KC_SLASH, \ + KC_4, KC_5, KC_6, KC_KP_ASTERISK, \ + KC_1, KC_2, KC_3, KC_MINUS, \ + TD(TD_0_L3), TD(TD_DOT_L2), TD(TD_KP_PLUS_L1), TD(TD_EQUAL_NP)), + +/* L1 + * ,-----------------------. + * | Esc |Bksp |Home |PgUp | + * |-----`-----`-----`-----| + * | Tab | Up | End |PgDn | + * |-----`-----`-----`-----| + * |Left |Down |Right|Enter| + * |-----`-----`-----`-----| + * | 0 | . | + | = | + * `-----`-----`-----`-----' + */ + [_L1] = /* LAYER 1 */ + SINGLES_KEYMAP(KC_ESCAPE, KC_BSPACE, KC_HOME, KC_PGUP, \ + KC_TAB, KC_UP, KC_END, KC_PGDOWN, \ + KC_LEFT, KC_DOWN, KC_RIGHT, KC_KP_ENTER, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +/* L2 + * ,-----------------------. + * |Sleep|LClik|RClik|VolUp| + * |-----`-----`-----`-----| + * |AltF4| F11 |WinTb|VolDn| + * |-----`-----`-----`-----| + * |PrvTk|Play |NxtTk|Mute | + * |-----`-----`-----`-----| + * | 0 | . | + | = | + * `-----`-----`-----`-----' + */ + [_L2] = /* LAYER 2 */ + SINGLES_KEYMAP(KC_SYSTEM_SLEEP, KC_MS_BTN1, KC_MS_BTN2, KC_AUDIO_VOL_UP, \ + LALT(KC_F4), KC_F11, LGUI(KC_TAB), KC_AUDIO_VOL_DOWN, \ + KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + +/* L3 needs cut, copy, paste, undo, again (redo), find, calc, www back, www forward, F5 + * ,-----------------------. + * |WBack|WHome|WFor | F5 | + * |-----`-----`-----`-----| + * |Calc |Undo |Redo |WSrch| + * |-----`-----`-----`-----| + * | Cut |Copy |Paste|Find | + * |-----`-----`-----`-----| + * | 0 | . | + | = | + * `-----`-----`-----`-----' + */ + [_L3] = /* LAYER 3 */ + SINGLES_KEYMAP(KC_WWW_BACK, KC_WWW_HOME, KC_WWW_FORWARD, KC_F5, \ + KC_CALCULATOR, LCTL(KC_Z), LCTL(KC_Y), KC_WWW_SEARCH, \ + LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), LCTL(KC_F), \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _L3: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_L3); + } + break; + case _L2: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_L2); + } + break; + case _L1: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_L1); + } + break; + case _NP: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_NP); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/roadkit/keymaps/singlesBrent/readme.md b/keyboards/roadkit/keymaps/singlesBrent/readme.md new file mode 100644 index 0000000000..48ea4a8b35 --- /dev/null +++ b/keyboards/roadkit/keymaps/singlesBrent/readme.md @@ -0,0 +1,3 @@ +# The singles keymap for roadkit + +This keymap has a base layer with numpad functionality, and then a second layer with some additional keys. The user is encouraged to develop their own keymap using this as a starting point. diff --git a/keyboards/roadkit/readme.md b/keyboards/roadkit/readme.md index d7480a1654..e99b385f37 100644 --- a/keyboards/roadkit/readme.md +++ b/keyboards/roadkit/readme.md @@ -1,32 +1,14 @@ -roadkit keyboard firmware -====================== +roadkit +======= -## Quantum MK Firmware +A programmable macro pad. -For the full Quantum feature list, see [the QMK Wiki](https://github.com/qmk/qmk_firmware/wiki). +Keyboard Maintainer: QMK Community +Hardware Supported: Roadkit PCB +Hardware Availability: https://thevankeyboards.com/products/roadkit-r2?variant=37353813966 -## Building +Make example for this keyboard (after setting up your build environment): -Download or clone the whole firmware and navigate to the `keyboards/roadkit` folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex. You can then use the programmer of your choice to program your .hex file. + make roadkit-default -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. For the roadkit, the default layout is a standard numpad layout. - -### Singles - -The singles layout for the roadkit corresponds to the configuration where only 1u keys are used and there are 16 of them on the board. To build the singles keymap, run `make singles`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/s60_x/readme.md b/keyboards/s60_x/readme.md index e30b2f76ce..9e1d06150f 100644 --- a/keyboards/s60_x/readme.md +++ b/keyboards/s60_x/readme.md @@ -1,255 +1,13 @@ -S60-x keyboard firmware -====================== +S60-x +===== DIY compact keyboard designed by VinnyCordeiro for Sentraq. Most of the keymaps are based on GH60 code. This is a port from TMK to QMK based on the [original S60-X Repo](https://github.com/VinnyCordeiro/tmk_keyboard). -## S60X Resources -- [Massdrop page](https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit?mode=guest_open) +Keyboard Maintainer: QMK Community +Hardware Supported: S60-x PCB +Hardware Availability: https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit?mode=guest_open -## Flashing your keyboard -The recommended programs for flashing your keyboard are [Atmel FLIP](http://www.atmel.com/tools/FLIP.aspx) (Windows) and [dfu-programmer](http://dfu-programmer.sourceforge.net/) (Linux/Windows). +Make example for this keyboard (after setting up your build environment): -[QMK Firmware Flasher](https://github.com/qmk/qmk_firmware_flasher/releases) may work, as the S60-X keyboard uses the ATMega32U4 microcontroller, but it is untested. Use at your own risk. + make s60_x-default -[Easy AVR USB Keyboard Firmware](https://deskthority.net/wiki/Easy_AVR_USB_Keyboard_Firmware) also supports S60-X, but it is completely unrelated to TMK firmware. Use at your own risk. - -**Programming the firmware (Windows)** - -1. download and install FLIP (http://www.atmel.com/tools/FLIP.aspx) -2. connect the keyboard, press the program button on the underside of the board (S1) and wait until it enumerates (you'll hear the "disconnect" and "connect" sound) -3. go to device manager, find the atmega32u4 chip and click "update driver" -4. choose location manually: folder named "usb" inside the installation directory of FLIP -5. once the driver is installed, run flip -6. Device -> Select: choose ATMega32U4 -7. Settings -> Communication -> USB, FLIP should show the signature at this point (58 1E 95 87) -8. File -> Load HEX file: choose the hex firmware: <firmware>.hex -9. click "Run" -10. after programming is done, disconnect the device from USB and connect again. - - -**Programming the firmware (Linux)** - -1. Download and install/compile/unpack dfu-programmer from http://dfu-programmer.sourceforge.net/. -2. Issue the following commands in the command prompt after connecting the device and pressing the programming button (S1). You may need root permissions or udev rules to do that. - 1. `sudo dfu-programmer atmega32u4 erase` - 2. `sudo dfu-programmer atmega32u4 flash <firmware>.hex` - 3. `sudo dfu-programmer atmega32u4 start` -3. The keyboard should start working. If it doesn't, reconnect the cable. - -## Building the firmware - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - - $ make [custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>] - -For a more detailed explanation of the build process and the environment setup, see the ["Getting Started" section](/readme.md#getting-started). - -## List of included Keymaps - -Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. -To define your own keymap, copy the [default keymap template](/quantum/template/keymaps/default) directory into the `keymaps` directory and start modifying the `keymap.c` file. Some options might require you to change the `config.h` or `Makefile` as well, refer to the main documentation for more information on those. -If you want to later merge your finalised keymap into this repository to make it available for everyone, make sure to also modify the `readme.md` in your keymap directory to show a visual version of your keymap. - -Here's a list of the standard layouts that are provided with the precompiled .hex-files. - -### 0 Initial explanations -The █████ blocks on the layouts hides the switch positions that do not exist physically on the PCB. If you feel like hacking the keyboard and adding new keys, those are the positions that can be used. You'll have to modify the [keymap_common.h](keymap_common.h) file for that. - -The ▒▒▒▒▒ blocks hides switch positions not used on this particular layout, but they do exist on the PCB. - -There is no LED support on the PCB at the moment, but I'll let the code for that untouched. - - -### 1 [Standard - ANSI (default layout)](keymaps/default/keymap.c) -The standard keymap is the one that is pre-flashed on the S60-X. - -#### 1.0 Default layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ -#### 1.1 Fn layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │Left │Down │Right│ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ - - -### 2 [Standard - ISO](keymaps/iso/keymap.c) -The same as the standard keymap, but with additional ISO keys. - - -#### 2.0 Default layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │▒▒▒▒▒│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │NUHS │ENTER│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │LSHFT│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ -#### 2.1 Fn layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│▒▒▒▒▒│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │Left │Down │Right│ │ │ │ │ │ │ │ │ │ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ - - -### 3 Poker -[The poker keymap](keymaps/poker/keymap.c) emulates original Vortex Poker layers -while both [poker_bit](keymaps/poker_bit/keymap.c) and [poker_set](keymap/poker_set/keymap.c) implement the same layout in a slightly different way, fix a minor issue of the original poker Layout and enhance arrow keys. - - Fn + Esc = ` - Fn + {left, down, up, right} = {home, pgdown, pgup, end} - -#### 3.0 Default layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Fn │ Gui │ App │Ctrl │█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ -#### 3.1 Poker Fn layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ FnQ │ Up │ │ │ │ │ │ │ Cal │ │Home │ Ins │ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │Left │Down │Right│ │ │ Psc │ Slk │Pause│ │ Tsk │ End │▒▒▒▒▒│ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │▒▒▒▒▒│ Del │ │ Web │Mute │ VoU │ VoD │ │PgUp │PgDwn│ Del │▒▒▒▒▒│ Up │▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ │█████│█████│█████│ FnS │█████│█████│█████│ Fn │Left │Down │Right│█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ - - -### 4. [Plain](keymaps/plain/keymap.c) -Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host. - -#### 4.0 Plain Default layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ - - -### 5. [Hasu](keymaps/hasu/keymap.c) -This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. - -(Hasu is the creator of the TMK firmware, for those who do not know that.) - - -### 6. [SpaceFN](keymaps/spacefn/keymap.c) -This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. Check the sourcefile and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0) for more information. - -#### 6.0 Default layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BkSpc│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│Enter│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Ctrl │ Gui │ Alt │█████│█████│████ Space/Fn ███│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ -#### 6.1 SpaceFN layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ ` │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ │ │ │ │ │Home │ Up │ End │ Psc │ Slk │Pause│ Ins │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ │ │ │ │PgUp │Left │Down │Right│ │ │▒▒▒▒▒│ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │▒▒▒▒▒│ │ │ │ │Space│PgDwn│ ` │ ~ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ │█████│█████│█████│ Fn │█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ - - -### 7. [HHKB](keymap/hhkb/keymap.c) -The HHKB keymap emulates original HHKB layers. -#### 7.0: Default layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │BkSpc│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Fn3 │ ' │▒▒▒▒▒│Enter│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Shift│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│Shift│ Fn │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │▒▒▒▒▒│ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│▒▒▒▒▒│ Alt │ Gui │▒▒▒▒▒│█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ -#### 7.1: HHKB Fn layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ Pwr │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │ Ins │ Del │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Caps │ │ │ │ │ │ │ │ Psc │ Slk │ Pus │ Up │ │ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ VoD │ VoU │ Mut │ Ejc │ │ * │ / │Home │PgUp │Left │Right│▒▒▒▒▒│Enter│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │▒▒▒▒▒│ │ │ │ │ │ + │ - │ End │PgDwn│Down │▒▒▒▒▒│ │ │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │▒▒▒▒▒│ │ │█████│█████│█████│ │█████│█████│█████│▒▒▒▒▒│ │ │▒▒▒▒▒│█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ - - -### 8 [Custom](keymaps/custom/keymap.c) -The custom keymap is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys. - -#### 8.0 Default layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │PgUp │BkSpc│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │PgDwn│Enter│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Shift│Home │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ End │Shift│ Up │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ - -### 9. [ANSI_QWERTZ](keymaps/ansi_qwertz/keymap.c) - -This keymap was designed for inputting characters with diacritics with ANSI keycaps. -It provides toggleable SpaceFn functionality, a dedicated arrow cluster and a microphone mute key on the function layer as well as a bootloader reset key. - -For more info, [check here](keymaps/ansi_qwertz/readme.md). +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/s65_x/readme.md b/keyboards/s65_x/readme.md index 0c558428b4..9021af4dff 100644 --- a/keyboards/s65_x/readme.md +++ b/keyboards/s65_x/readme.md @@ -1,80 +1,13 @@ -S65-x keyboard firmware -====================== +S65-x +===== DIY 65% keyboard from Sentraq. -## S65X Resources -- [Sentraq page](https://sentraq.com/collections/group-buys/products/gb-s65-x-rgb-diy-kit?variant=39246723914) +Keyboard Maintainer: QMK Community +Hardware Supported: S65-x PCB +Hardware Availability: https://sentraq.com/collections/group-buys/products/gb-s65-x-rgb-diy-kit?variant=39246723914 -## Flashing your keyboard -The recommended programs for flashing your keyboard are [Atmel FLIP](http://www.atmel.com/tools/FLIP.aspx) (Windows) and [dfu-programmer](http://dfu-programmer.sourceforge.net/) (Linux/Windows). +Make example for this keyboard (after setting up your build environment): -[QMK Firmware Flasher](https://github.com/qmk/qmk_firmware_flasher/releases) may work, as the S65-X keyboard uses the ATMega32U4 microcontroller, but it is untested. Use at your own risk. - -**Programming the firmware (Windows)** - -1. download and install FLIP (http://www.atmel.com/tools/FLIP.aspx) -2. connect the keyboard, press the program button on the underside of the board (S1) and wait until it enumerates (you'll hear the "disconnect" and "connect" sound) -3. go to device manager, find the atmega32u4 chip and click "update driver" -4. choose location manually: folder named "usb" inside the installation directory of FLIP -5. once the driver is installed, run flip -6. Device -> Select: choose ATMega32U4 -7. Settings -> Communication -> USB, FLIP should show the signature at this point (58 1E 95 87) -8. File -> Load HEX file: choose the hex firmware: <firmware>.hex -9. click "Run" -10. after programming is done, disconnect the device from USB and connect again. - - -**Programming the firmware (Linux/Mac)** - -1. Download and install/compile/unpack dfu-programmer from http://dfu-programmer.sourceforge.net/. -2. Issue the following commands in the command prompt after connecting the device and pressing the programming button (S1). You may need root permissions or udev rules to do that. - 1. `sudo dfu-programmer atmega32u4 erase` - 2. `sudo dfu-programmer atmega32u4 flash <firmware>.hex` - 3. `sudo dfu-programmer atmega32u4 start` -3. The keyboard should start working. If it doesn't, reconnect the cable. - -## Building the firmware - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - - $ make default - -For a more detailed explanation of the build process and the environment setup, see the ["Getting Started" section](/readme.md#getting-started). - -## Keymaps - -Currently only an ANSI keymap is provided, hopefully others will contribute theirs. - -### 0 Initial explanations -The █████ blocks on the layouts hides the switch positions that do not exist physically on the PCB. If you feel like hacking the keyboard and adding new keys, those are the positions that can be used. You'll have to modify the [keymap_common.h](keymap_common.h) file for that. - -The ▒▒▒▒▒ blocks hides switch positions not used on this particular layout, but they do exist on the PCB. - - -### 1 [Standard - ANSI (default layout)](keymaps/default/keymap.c) - -#### 1.0 Default layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│DEL │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │▒▒▒▒▒│END │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│▒▒▒▒▒│PG_UP│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│ UP │PG_DN│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │LCTRL│L_ALT│L_GUI│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │LEFT │DOWN │RIGHT│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ -#### 1.1 Fn layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│▒▒▒▒▒│ │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ _AL │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│ │▒▒▒▒▒│ │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │Left │Down │Right│ │ │Left │Down │ Up │Right│ │ │▒▒▒▒▒│ │▒▒▒▒▒│ │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │▒▒▒▒▒│_UL │ │ │ │ │ │ │Home │ End │ │▒▒▒▒▒│Vol+ │▒▒▒▒▒│ │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │Mute │Vol- │Play │ │ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + make s65_x-default +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/satan/keymaps/poker/keymap.c b/keyboards/satan/keymaps/poker/keymap.c index 9da7d29b78..b7e6fac219 100644 --- a/keyboards/satan/keymaps/poker/keymap.c +++ b/keyboards/satan/keymaps/poker/keymap.c @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------. * | ~ | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | * |-----------------------------------------------------------| - * | | Up| | | | |Cal| |Ins| |PrSc|Sclk|Paus| | + * | | |Up| | | |Cal| |Ins| |PrSc|Sclk|Paus| | * |-----------------------------------------------------------| * | |Left|Down|Rig| | | | | | |Home|PgUp| | * |-----------------------------------------------------------| @@ -51,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - + /* Keymap _RL: Function Layer * ,-----------------------------------------------------------. * | | | | | | | | | | | | | | RESET| @@ -63,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | * |-----------------------------------------------------------| * | | | | | | | | | - * `-----------------------------------------------------------' + * `-----------------------------------------------------------' */ [_RL] = KEYMAP_ANSI( #ifdef RGBLIGHT_ENABLE diff --git a/keyboards/satan/readme.md b/keyboards/satan/readme.md index 1fd388935e..33310ce251 100644 --- a/keyboards/satan/readme.md +++ b/keyboards/satan/readme.md @@ -1,7 +1,15 @@ -Satan GH60 keyboard firmware -====================== - -TODO: to be updated. +Satan GH60 +========== ![controller](https://i.imgur.com/9vyRBoT.jpg) -![power](https://i.imgur.com/pHMZHLP.jpg)
\ No newline at end of file +![power](https://i.imgur.com/pHMZHLP.jpg) + +Keyboard Maintainer: QMK Community +Hardware Supported: Satan GH60 PCB +Hardware Availability: https://1upkeyboards.com/gh60-satan-pcb.html + +Make example for this keyboard (after setting up your build environment): + + make satan-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/sixkeyboard/readme.md b/keyboards/sixkeyboard/readme.md index 7d78a0cae5..a2fc9eb46b 100644 --- a/keyboards/sixkeyboard/readme.md +++ b/keyboards/sixkeyboard/readme.md @@ -1,6 +1,17 @@ -# Techkeys SixKeyBoard +Techkeys SixKeyBoard +=== -[Get one here!](http://techkeys.us/collections/accessories/products/sixkeyboard) +Keyboard Maintainer: QMK Community +Hardware Supported: Techkeys SixKeyBoard PCB +Hardware Availability: http://techkeys.us/collections/accessories/products/sixkeyboard + +Make example for this keyboard (after setting up your build environment): + + make sixkeyboard-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +## Hardware Info The schematic is like this: @@ -15,4 +26,4 @@ The schematic is like this: The LED on the bottom is `C4`. All 7 of the leds are turned on when the keyboard boots-up in the `sixkeyboard.c` file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit. -There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.
\ No newline at end of file +There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object. diff --git a/keyboards/tada68/Makefile b/keyboards/tada68/Makefile index 4e2a6f00fd..4e2a6f00fd 100644..100755 --- a/keyboards/tada68/Makefile +++ b/keyboards/tada68/Makefile diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h index 19cf9c9b39..3e011bc754 100644..100755 --- a/keyboards/tada68/config.h +++ b/keyboards/tada68/config.h @@ -63,19 +63,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define BACKLIGHT_LEVELS 4 -/* Underlight configuration - */ - -/*#define RGB_DI_PIN E2 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 2 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17*/ -//Disabled while I figure out a suitable pin for RGB support. -//I've tried F5, D2, D3, and E2 but it's possible the end of my -//strand is bad. New LEDs on order. - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tada68/keymaps/default/Makefile b/keyboards/tada68/keymaps/default/Makefile index 2a7ff27793..2a7ff27793 100644..100755 --- a/keyboards/tada68/keymaps/default/Makefile +++ b/keyboards/tada68/keymaps/default/Makefile diff --git a/keyboards/tada68/keymaps/default/keymap.c b/keyboards/tada68/keymaps/default/keymap.c index f28116e0a5..8e7cbdaf26 100644..100755 --- a/keyboards/tada68/keymaps/default/keymap.c +++ b/keyboards/tada68/keymaps/default/keymap.c @@ -38,14 +38,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |----------------------------------------------------------------| * | |<- |Dn | ->| | | | | | | | | |End | * |----------------------------------------------------------------| - * | | | |Bl-|BL |BL+| |VU-|VU+|MUT| |MouseL|MsU|Rck | + * | | | |Bl-|BL |BL+| |VU-|VU+|MUT| | McL|MsU|McR | * |----------------------------------------------------------------| * | | | | | | | |MsL|MsD|MsR | * `----------------------------------------------------------------' */ [_FL] = KEYMAP_ANSI( _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS , \ - _______,_______,KC_UP, _______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG,KC_HOME, \ + _______,_______, KC_UP,_______,_______, _______,_______,_______,_______,_______,_______,_______,_______, _______,KC_HOME, \ _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______, _______,KC_END, \ _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_BTN1, KC_MS_U, KC_BTN2, \ _______,_______,_______, _______, _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R), diff --git a/keyboards/tada68/keymaps/default/readme.md b/keyboards/tada68/keymaps/default/readme.md index 53412d7c25..53412d7c25 100644..100755 --- a/keyboards/tada68/keymaps/default/readme.md +++ b/keyboards/tada68/keymaps/default/readme.md diff --git a/keyboards/tada68/keymaps/maartenwut/Makefile b/keyboards/tada68/keymaps/maartenwut/Makefile new file mode 100755 index 0000000000..f9e1699063 --- /dev/null +++ b/keyboards/tada68/keymaps/maartenwut/Makefile @@ -0,0 +1,22 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = yes # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +COMBO_ENABLE = no # Enable key combinations + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/tada68/keymaps/maartenwut/config.h b/keyboards/tada68/keymaps/maartenwut/config.h new file mode 100755 index 0000000000..7d81548b7f --- /dev/null +++ b/keyboards/tada68/keymaps/maartenwut/config.h @@ -0,0 +1,3 @@ +#include "../../config.h" + +#define BACKLIGHT_BREATHING
\ No newline at end of file diff --git a/keyboards/tada68/keymaps/maartenwut/keymap.c b/keyboards/tada68/keymaps/maartenwut/keymap.c new file mode 100755 index 0000000000..8ddd6e3056 --- /dev/null +++ b/keyboards/tada68/keymaps/maartenwut/keymap.c @@ -0,0 +1,414 @@ +#include "tada68.h" +#include "action_layer.h" +#include "timer.h" +#include "bootloader.h" +#include "command.h" + +#define _MA 0 +#define _GA 1 +#define _FL 2 +#define _AR 3 +#define _LO 4 +#define _UL 5 + +#define TRNS KC_TRNS +#define trigger_time 400 + +#define T1 M(1) +#define T2 M(2) +#define T3 M(3) +#define T4 M(4) +#define T5 M(5) +#define T6 M(6) +#define T7 M(7) +#define T8 M(8) +#define T9 M(9) +#define T10 M(10) +#define T11 M(11) +#define T12 M(12) +#define END_HOME M(0) +#define LSHIFT OSM(MOD_LSFT) +#define SPACE LT(_AR, KC_SPC) + +static uint16_t key_timer; + +enum emoticons { + LENNY = SAFE_RANGE, + DWNHRT, + SHRUG +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _MA: Main Layer, Default + * ,----------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |P/P | + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del | + * |----------------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp| + * |----------------------------------------------------------------| + * |Shft|End| Z| X| C| V| B| N| M| ,| .| /|Shift | Up|PgDn| + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt|Ctrl| FN|Lef|Dow|Rig | + * `----------------------------------------------------------------' + */ +[_MA] = KEYMAP_ANSI( + KC_ESC, T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T11, T12, KC_BSPC, KC_MPLY, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + LSHIFT, END_HOME, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LGUI, KC_LALT, SPACE, KC_RALT, KC_RCTRL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + * ,----------------------------------------------------------------. + * |~` | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Reset |Prsc| + * |----------------------------------------------------------------| + * | |MbL|MsU|MbR| | | | | | | | | | |_LO | + * |----------------------------------------------------------------| + * | |MsL|MsD|MsR| |_GA| | | | | | | |Hme | + * |----------------------------------------------------------------| + * | | | | | | | | | |VoU|VoD|Mut| |MwU|End | + * |----------------------------------------------------------------| + * | | | | | | | |MwL|MwD|MwR | + * `----------------------------------------------------------------' + */ +[_FL] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET, KC_PSCR, \ + TRNS, KC_BTN1, KC_MS_U, KC_BTN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TO(_LO), \ + TRNS, KC_MS_L, KC_MS_D, KC_MS_R, TRNS, TG(_GA), TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_HOME, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_VOLD, KC_VOLU, KC_MUTE, TRNS, KC_WH_U, KC_END, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_WH_L, KC_WH_D, KC_WH_R), + + /* Keymap _AR: Arrow layer + * ,----------------------------------------------------------------. + * |~` | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| | | + * |----------------------------------------------------------------| + * |Lenny| | | | | | | | | | | | | | | + * |----------------------------------------------------------------| + * |Dwnhrt| | | | | |Lft|Dwn| Up|Rgt| | | | | + * |----------------------------------------------------------------| + * |Shrg| | | | | | | | | | | | | | | + * |----------------------------------------------------------------| + * | | | | | | | | | | | + * `----------------------------------------------------------------' + */ +[_AR] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TRNS, TRNS, \ + LENNY, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + DWNHRT, TRNS, TRNS, TRNS, TRNS, TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TRNS, TRNS, TRNS, TRNS, \ + SHRUG, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), + + /* Keymap _GA: Game layer + * ,----------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |P/P | + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del | + * |----------------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp| + * |----------------------------------------------------------------| + * |Shft|End| Z| X| C| V| B| N| M| ,| .| /|Shift | Up|PgDn| + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt|Ctrl| FN|Lef|Dow|Rig | + * `----------------------------------------------------------------' + */ +[_GA] = KEYMAP_ANSI( + KC_ESC, T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T11, T12, KC_BSPC, KC_MPLY, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, END_HOME, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTRL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _UL: Unlock layer + * ,----------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |----------------------------------------------------------------| + * | | | | | | | | | | | | | | |_MA | + * |----------------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |----------------------------------------------------------------| + * | | | | | | | | | | | | | | | | + * |----------------------------------------------------------------| + * | | | | | | | | | | | + * `----------------------------------------------------------------' + */ +[_UL] = KEYMAP_ANSI( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(_MA), \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TRNS, KC_NO, KC_NO, KC_NO), + + /* Keymap _LO: Lock layer + * ,----------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |----------------------------------------------------------------| + * | | | | | | | | | | | | | | | | + * |----------------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |----------------------------------------------------------------| + * | | | | | | | | | | | | | | | | + * |----------------------------------------------------------------| + * | | | | | | | _UL | | | | + * `----------------------------------------------------------------' + */ +[_LO] = KEYMAP_ANSI( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, MO(_UL), KC_NO, KC_NO, KC_NO), +}; + +void tap(uint16_t keycode){ + register_code(keycode); + unregister_code(keycode); +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LENNY: // ( ͡° ͜ʖ ͡°) + if(record->event.pressed){ + set_unicode_input_mode(UC_WIN); + register_code(KC_LSFT); + tap(KC_9); // Head + unregister_code(KC_LSFT); + tap(KC_SPC); // Space + process_unicode((0x0361|QK_UNICODE), record); // Eyebrow + process_unicode((0x00B0|QK_UNICODE), record); // Eye + tap(KC_SPC); + process_unicode((0x035C|QK_UNICODE), record); // Mouth + process_unicode((0x0296|QK_UNICODE), record); // Nose + tap(KC_SPC); + process_unicode((0x0361|QK_UNICODE), record); // Eyebrow + process_unicode((0x00B0|QK_UNICODE), record); // Eye + register_code(KC_LSFT); + tap(KC_0); // Head + unregister_code(KC_LSFT); + } + return false; + break; + case DWNHRT: // (´・ω・`) + if(record->event.pressed){ + set_unicode_input_mode(UC_WIN); + register_code(KC_LSFT); + tap(KC_9); // Head + unregister_code(KC_LSFT); + process_unicode((0x00B4|QK_UNICODE), record); // Eyebrow + process_unicode((0x30FB|QK_UNICODE), record); // Eye + process_unicode((0x03C9|QK_UNICODE), record); // Mouth + process_unicode((0x30FB|QK_UNICODE), record); // Eye + process_unicode((0x0060|QK_UNICODE), record); // Eyebrow + register_code(KC_LSFT); + tap(KC_0); // Head + unregister_code(KC_LSFT); + } + return false; + break; + case SHRUG: // ¯\_(ツ)_/¯ + if(record->event.pressed){ + set_unicode_input_mode(UC_WIN); + process_unicode((0x00AF|QK_UNICODE), record); // Hand + tap(KC_BSLS); // Arm + register_code(KC_LSFT); + tap(KC_UNDS); // Arm + tap(KC_LPRN); // Head + unregister_code(KC_LSFT); + process_unicode((0x30C4|QK_UNICODE), record); // Face + register_code(KC_LSFT); + tap(KC_RPRN); // Head + tap(KC_UNDS); // Arm + unregister_code(KC_LSFT); + tap(KC_SLSH); // Arm + process_unicode((0x00AF|QK_UNICODE), record); // Hand + } + return false; + break; + } + return true; +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case 0: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(END), END ); + } + else { + return MACRO( T(HOME), END ); + } + } + break; + case 1: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F1), END ); + } + else { + return MACRO( T(1), END ); + } + } + break; + case 2: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F2), END ); + } + else { + return MACRO( T(2), END ); + } + } + break; + case 3: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F3), END ); + } + else { + return MACRO( T(3), END ); + } + } + break; + case 4: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F4), END ); + } + else { + return MACRO( T(4), END ); + } + } + break; + case 5: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F5), END ); + } + else { + return MACRO( T(5), END ); + } + } + break; + case 6: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F6), END ); + } + else { + return MACRO( T(6), END ); + } + } + break; + case 7: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F7), END ); + } + else { + return MACRO( T(7), END ); + } + } + break; + case 8: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F8), END ); + } + else { + return MACRO( T(8), END ); + } + } + break; + case 9: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F9), END ); + } + else { + return MACRO( T(9), END ); + } + } + break; + case 10: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F10), END ); + } + else { + return MACRO( T(0), END ); + } + } + break; + case 11: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F11), END ); + } + else { + return MACRO( T(MINS), END ); + } + } + break; + case 12: + if (record->event.pressed) { + key_timer = timer_read(); + } + else { + if (timer_elapsed(key_timer) > trigger_time) { + return MACRO( T(F12), END ); + } + else { + return MACRO( T(EQL), END ); + } + } + break; + } + return MACRO_NONE; +}; + +void led_set_user(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB |= (1<<6); + } else { + // Turn capslock off + PORTB &= ~(1<<6); + } +} diff --git a/keyboards/tada68/keymaps/maartenwut/readme.md b/keyboards/tada68/keymaps/maartenwut/readme.md new file mode 100755 index 0000000000..a3c97cd26d --- /dev/null +++ b/keyboards/tada68/keymaps/maartenwut/readme.md @@ -0,0 +1,3 @@ +# Maartenwut's layout + +Well, this is my keyboard layout. You can call it a Tada69 if you want. diff --git a/keyboards/tada68/keymaps/maartenwut/tada68.h b/keyboards/tada68/keymaps/maartenwut/tada68.h new file mode 100755 index 0000000000..e7e17a9386 --- /dev/null +++ b/keyboards/tada68/keymaps/maartenwut/tada68.h @@ -0,0 +1,43 @@ +#ifndef TADA68_H +#define TADA68_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +/* TADA68 ANSI layout + * ,----------------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | 0e | + * |----------------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | 1e | + * |----------------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | 2e | + * |----------------------------------------------------------------| + * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c| 3d| 3e | + * |----------------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 49| 4a| 4b| 4c| 4d| 4e | + * `----------------------------------------------------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define KEYMAP_ANSI( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k45, k49, k4a, k4b, k4c, k4d, k4e \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, k2e}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e} \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif diff --git a/keyboards/tada68/keymaps/rgb/Makefile b/keyboards/tada68/keymaps/rgb/Makefile new file mode 100755 index 0000000000..ee94a67b4e --- /dev/null +++ b/keyboards/tada68/keymaps/rgb/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/tada68/keymaps/rgb/config.h b/keyboards/tada68/keymaps/rgb/config.h new file mode 100755 index 0000000000..5dcdad12e5 --- /dev/null +++ b/keyboards/tada68/keymaps/rgb/config.h @@ -0,0 +1,9 @@ +#include "../../config.h" + +/* WS2812B RGB Underglow LED */ +#define RGB_DI_PIN F5 // See readme.md for wiring your led's +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8
\ No newline at end of file diff --git a/keyboards/tada68/keymaps/rgb/keymap.c b/keyboards/tada68/keymaps/rgb/keymap.c new file mode 100755 index 0000000000..4634e5e3a4 --- /dev/null +++ b/keyboards/tada68/keymaps/rgb/keymap.c @@ -0,0 +1,52 @@ +#include "tada68.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,----------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |~ ` | + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del | + * |----------------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp| + * |----------------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|PgDn| + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt| FN|Ctrl|Lef|Dow|Rig | + * `----------------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS,KC_DEL, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,KC_UP,KC_PGDN, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(_FL),KC_RCTRL, KC_LEFT,KC_DOWN,KC_RGHT), + + /* Keymap _FL: Function Layer + * ,----------------------------------------------------------------. + * | | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del |Ins | + * |----------------------------------------------------------------| + * | | |Up | | |RGB|MOD|HU-|HU+|SA-|SA+|VA-|VA+| |Hme | + * |----------------------------------------------------------------| + * | |<- |Dn | ->| | | | | | | | | |End | + * |----------------------------------------------------------------| + * | | | |Bl-|BL |BL+| |VU-|VU+|MUT| | McL|MsU|McR | + * |----------------------------------------------------------------| + * | | | | | | | |MsL|MsD|MsR | + * `----------------------------------------------------------------' + */ +[_FL] = KEYMAP_ANSI( + _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS , \ + _______,_______,KC_UP,_______,_______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______,KC_HOME, \ + _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______, _______,KC_END, \ + _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_BTN1, KC_MS_U, KC_BTN2, \ + _______,_______,_______, _______, _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R), +}; diff --git a/keyboards/tada68/keymaps/rgb/readme.md b/keyboards/tada68/keymaps/rgb/readme.md new file mode 100755 index 0000000000..fb5a5abd0c --- /dev/null +++ b/keyboards/tada68/keymaps/rgb/readme.md @@ -0,0 +1,3 @@ +# RGB on the TADA68 +This board has unused pins, which means that you can add some nice RGB leds, although they have no use at this momen because not a single transparent case has been made yet. Here's where you have to solder the wires on the PCB: +![Image of solder points for RGB on the Tada68](http://i.imgur.com/5Xmiz6Q.jpg)
\ No newline at end of file diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md index dbe2fdca1b..1986008bdc 100644..100755 --- a/keyboards/tada68/readme.md +++ b/keyboards/tada68/readme.md @@ -1,9 +1,23 @@ -TADA68 keyboard firmware -======================== +TADA68 +====== -1) from the keyboards/tada68 directory run: +A compact 65% keyboard. + +Keyboard Maintainer: QMK Community +Hardware Supported: TADA68 PCB +Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/products/tada68-mechanical-keyboard-gateron-swtich-65-layout-dye-sub-keycaps-cherry-profils?variant=34710238797) [kbdist](http://www.kbdist.com/shop/saber-68) + +Make example for this keyboard (after setting up your build environment): + + make tada68-default-bin + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +## Flashing Instructions + +1) from the `qmk_firmware` directory run: ``` -$ make flashbin +$ make tada68-default-bin ``` 2) hit the reset button on the TADA, the lights will start flashing. @@ -12,4 +26,4 @@ $ make flashbin 4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive. -5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
\ No newline at end of file +5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded! diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk index dd5b2bbe0c..dd5b2bbe0c 100644..100755 --- a/keyboards/tada68/rules.mk +++ b/keyboards/tada68/rules.mk diff --git a/keyboards/tada68/tada68.c b/keyboards/tada68/tada68.c index 24f89048cb..e4fab98101 100644..100755 --- a/keyboards/tada68/tada68.c +++ b/keyboards/tada68/tada68.c @@ -27,4 +27,5 @@ void led_set_kb(uint8_t usb_led) { // Turn capslock off PORTB |= (1<<2); } + led_set_user(usb_led); } diff --git a/keyboards/tada68/tada68.h b/keyboards/tada68/tada68.h index d0e027a6f4..d0e027a6f4 100644..100755 --- a/keyboards/tada68/tada68.h +++ b/keyboards/tada68/tada68.h diff --git a/keyboards/tiger_lily/readme.md b/keyboards/tiger_lily/readme.md index b5f30f2e11..b24c468366 100644 --- a/keyboards/tiger_lily/readme.md +++ b/keyboards/tiger_lily/readme.md @@ -1,32 +1,16 @@ -tiger_lily keyboard firmware -====================== +tiger_lily +========== This is the firmware for Rev. 20161114 of the Tiger Lily controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Filco Majestouch 2 104 key](https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1819). Bathroom Epiphanies has advised that the source is also compatible with the Black Petal controller, however I do not own an example to test against. The code was adapted from the [BathroomEpiphanies TMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers). -## Quantum MK Firmware +Keyboard Maintainer: QMK Community +Hardware Supported: Tiger Lily +Hardware Availability: https://geekhack.org/index.php?topic=46700.0 -For the full Quantum feature list, see [the parent readme](/). +Make example for this keyboard (after setting up your build environment): -## Building + make tiger_lily-default -Download or clone the whole firmware and navigate to the keyboards/tiger_lily folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` - -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/tv44/readme.md b/keyboards/tv44/readme.md index 4f691a4ca0..f0a277dec9 100644 --- a/keyboards/tv44/readme.md +++ b/keyboards/tv44/readme.md @@ -1,28 +1,14 @@ -tv44 keyboard firmware -====================== +The Van 44 +========== -## Quantum MK Firmware +A compact 44% keyboard. -For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). +Keyboard Maintainer: QMK Community +Hardware Supported: The Van PCB +Hardware Availability: https://thevankeyboards.com/products/minivan-r4-keyboard-kit?variant=37353952718 -## Building +Make example for this keyboard (after setting up your build environment): -Download or clone the whole firmware and navigate to the keyboards/tv44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + make tv44-default -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|<name>] -``` - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/uk78/Makefile b/keyboards/uk78/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/uk78/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/uk78/config.h b/keyboards/uk78/config.h new file mode 100644 index 0000000000..e538ad33b7 --- /dev/null +++ b/keyboards/uk78/config.h @@ -0,0 +1,76 @@ +/* +Copyright 2012 Jun Wako <ukkeyboards@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x554B /* Ascii */ +#define PRODUCT_ID 0x004E +#define DEVICE_VER 0x0002 +#define MANUFACTURER UK Keyboards +#define PRODUCT UK78 +#define DESCRIPTION QMK keyboard firmware for UK78 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 19 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F3, F2, F1, F0, A0 } +#define MATRIX_COL_PINS { A2, A1, F5, F4, E6, E7, E5, E4, B7, D0, D1, D2, D3, D4, D5, D6, D7, B5, E0 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ +#define BACKLIGHT_PIN B6 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + +/* ws2812b options */ +#define RGB_DI_PIN F6 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 20 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif diff --git a/keyboards/uk78/keymaps/default/keymap.c b/keyboards/uk78/keymaps/default/keymap.c new file mode 100644 index 0000000000..b01beae182 --- /dev/null +++ b/keyboards/uk78/keymaps/default/keymap.c @@ -0,0 +1,119 @@ +#include "uk78.h" + +// Helpful defines +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL1 1 +#define _FL2 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* _BL: Base Layer(Default) - For ISO enter use ANSI \ + * ,-------------------------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| /|BSpc| Del| P/| P*| P-| + * |-------------------------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | P7| P8| P9| P=| + * |-------------------------------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #| Ent| P4| P5| P6| P+| + * |-------------------------------------------------------------------------------| + * |Shift| \| Z| X| C| V| B| N| M| ,| .| /|Shift | Up| P1| P2| P3|SLck| + * |-------------------------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt|Mo(1)|Ctrl|Lef|Dow| Rig| P0| P.|PEnt| + * `-------------------------------------------------------------------------------' + */ + [_BL] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_DEL, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PEQL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_SLCK, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), + /* _FL1: Function Layer 1 - For ISO enter use ANSI \ + * ,-------------------------------------------------------------------------------. + * | `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|PScr|Ins|NLck| | | | + * |-------------------------------------------------------------------------------| + * | | | | |RST| | | | | | | | | | | | | | + * |-------------------------------------------------------------------------------| + * | | | | | | |Hu+|Va+|Sa+| | | | | | | | | | + * |-------------------------------------------------------------------------------| + * | | | | | |RGB|Hu-|Va-|Sa-|Bl-|Bl+| |Mute|Vol+| | | | | + * |-------------------------------------------------------------------------------| + * | | | | BL_Toggle | | | | |Vol-| | | | | + * `-------------------------------------------------------------------------------' + */ + [_FL1] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, BL_DEC, BL_INC, KC_TRNS, KC_MUTE, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + /* _FL2: Function Layer 2 - For ISO enter use ANSI \ + * ,-------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | | + * |-------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | | + * |-------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | | + * |-------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | | + * |-------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------' + */ + [_FL2] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + +}; + + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + DDRA |= (1 << 3); PORTA |= (1 << 3); + } else { + DDRA &= ~(1 << 3); PORTA &= ~(1 << 3); + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +}
\ No newline at end of file diff --git a/keyboards/uk78/readme.md b/keyboards/uk78/readme.md new file mode 100644 index 0000000000..46f2936143 --- /dev/null +++ b/keyboards/uk78/readme.md @@ -0,0 +1,16 @@ +# UK78 + +![UK78](http://i.imgur.com/42pg6RS.png) + +A fully customizable 60%+numpad keyboard. + +* Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin) +* Hardware Supported: UK78 PCB + * rev2 +* Hardware Availability: [ukkeyboards.](http://ukkeyboards.bigcartel.com/) + +Make example for this keyboard (after setting up your build environment): + + make uk78-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/uk78/rules.mk b/keyboards/uk78/rules.mk new file mode 100644 index 0000000000..4e8d14812f --- /dev/null +++ b/keyboards/uk78/rules.mk @@ -0,0 +1,56 @@ +# MCU name +MCU = at90usb1286 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=8192 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +AUDIO_ENABLE ?= no +RGBLIGHT_ENABLE ?= yes
\ No newline at end of file diff --git a/keyboards/uk78/uk78.c b/keyboards/uk78/uk78.c new file mode 100644 index 0000000000..3611427d02 --- /dev/null +++ b/keyboards/uk78/uk78.c @@ -0,0 +1 @@ +#include "uk78.h" diff --git a/keyboards/uk78/uk78.h b/keyboards/uk78/uk78.h new file mode 100644 index 0000000000..6cc5eee479 --- /dev/null +++ b/keyboards/uk78/uk78.h @@ -0,0 +1,20 @@ +#ifndef UK78_H +#define UK78_H + +#include "quantum.h" + +#define KEYMAP( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, K116, K117, K118, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K215, K216, K217, K218, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, \ + K400, K401, K402, K406, K410, K411, K412, K413, K414, K415, K416, K417, K418 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115, K116, K117, K118 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214, K215, K216, K217, K218 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318 }, \ + { K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, K414, K415, K416, K417, K418 } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/vision_division/readme.md b/keyboards/vision_division/readme.md index de200d7c5b..880c62f58d 100644 --- a/keyboards/vision_division/readme.md +++ b/keyboards/vision_division/readme.md @@ -1,34 +1,14 @@ -vision_division keyboard firmware -====================== +Vision Division +=============== -## Keyboard Info +Full Size / Split Linear Keyboard PCB -[See this thread.](https://geekhack.org/index.php?topic=83692.msg2227856#msg2227856) +Keyboard Maintainer: QMK Community +Hardware Supported: Vision Division PCB +Hardware Availability: https://geekhack.org/index.php?topic=83692.msg2227856#msg2227856 -Vision/Division is a full size or split keyboard that can be customized due to its pcb. +Make example for this keyboard (after setting up your build environment): -## Quantum MK Firmware + make vision_division-default -For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/vision_division folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: - -``` -$ make keymap=[default|jack|<name>] -``` - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/whitefox/animations.c b/keyboards/whitefox/animations.c deleted file mode 100644 index ed1d75efb8..0000000000 --- a/keyboards/whitefox/animations.c +++ /dev/null @@ -1,128 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#if defined(VISUALIZER_ENABLE) - -#include "animations.h" -#include "visualizer.h" - -#ifdef BACKLIGHT_ENABLE -#include "led_keyframes.h" -#endif - -#include "visualizer_keyframes.h" - - -#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE) - -static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { -#ifdef BACKLIGHT_ENABLE - led_keyframe_enable(animation, state); -#endif - return false; -} - -static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { -#ifdef BACKLIGHT_ENABLE - led_keyframe_disable(animation, state); -#endif - return false; -} - -static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) { - bool ret = false; -#ifdef BACKLIGHT_ENABLE - ret |= led_keyframe_fade_in_all(animation, state); -#endif - return ret; -} - -static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) { - bool ret = false; -#ifdef BACKLIGHT_ENABLE - ret |= led_keyframe_fade_out_all(animation, state); -#endif - return ret; -} - - -// Don't worry, if the startup animation is long, you can use the keyboard like normal -// during that time -keyframe_animation_t default_startup_animation = { - .num_frames = 2, - .loop = false, - .frame_lengths = {0, gfxMillisecondsToTicks(5000)}, - .frame_functions = { - keyframe_enable, - keyframe_fade_in, - }, -}; - -keyframe_animation_t default_suspend_animation = { - .num_frames = 2, - .loop = false, - .frame_lengths = {gfxMillisecondsToTicks(1000), 0}, - .frame_functions = { - keyframe_fade_out, - keyframe_disable, - }, -}; -#endif - -#if defined(BACKLIGHT_ENABLE) -#define CROSSFADE_TIME 1000 -#define GRADIENT_TIME 3000 - -keyframe_animation_t led_test_animation = { - .num_frames = 14, - .loop = true, - .frame_lengths = { - gfxMillisecondsToTicks(1000), // fade in - gfxMillisecondsToTicks(1000), // no op (leds on) - gfxMillisecondsToTicks(1000), // fade out - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom - 0, // mirror leds - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom - 0, // normal leds - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - - }, - .frame_functions = { - led_keyframe_fade_in_all, - keyframe_no_operation, - led_keyframe_fade_out_all, - led_keyframe_crossfade, - led_keyframe_left_to_right_gradient, - led_keyframe_crossfade, - led_keyframe_top_to_bottom_gradient, - led_keyframe_mirror_orientation, - led_keyframe_crossfade, - led_keyframe_left_to_right_gradient, - led_keyframe_crossfade, - led_keyframe_top_to_bottom_gradient, - led_keyframe_normal_orientation, - led_keyframe_crossfade, - }, -}; -#endif - -#endif diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/whitefox/board_is31fl3731c.h index 3dc5327a58..dea643f107 100644 --- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h +++ b/keyboards/whitefox/board_is31fl3731c.h @@ -22,9 +22,6 @@ static const I2CConfig i2ccfg = { 400000 // clock speed (Hz); 400kHz max for IS31 }; -#define GDISP_SCREEN_WIDTH 16 -#define GDISP_SCREEN_HEIGHT 5 - static const uint8_t led_mask[] = { 0xFF, 0x00, /* C1-1 -> C1-16 */ 0xFF, 0x00, /* C2-1 -> C2-16 */ diff --git a/keyboards/whitefox/config.h b/keyboards/whitefox/config.h index 08de9b9aa8..dc33a7ce5b 100644 --- a/keyboards/whitefox/config.h +++ b/keyboards/whitefox/config.h @@ -81,12 +81,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -#endif - -// The visualizer needs gfx thread priorities -#define LED_DISPLAY_NUMBER 0 - -#define LED_NUM_ROWS 5 -#define LED_NUM_COLS 16 - -#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) +#endif
\ No newline at end of file diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk deleted file mode 100644 index f32d0d8685..0000000000 --- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/gdisp/IS31FL3731C -GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c deleted file mode 100644 index c807cbd1e2..0000000000 --- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c +++ /dev/null @@ -1,312 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "gfx.h" - -#if GFX_USE_GDISP - -#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_WHITEFOX -#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h" -#include "src/gdisp/gdisp_driver.h" - -#include "board_IS31FL3731C.h" - - -// Can't include led_tables from here -extern const uint8_t CIE1931_CURVE[]; - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 9 -#endif -#ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 16 -#endif -#ifndef GDISP_INITIAL_CONTRAST - #define GDISP_INITIAL_CONTRAST 0 -#endif -#ifndef GDISP_INITIAL_BACKLIGHT - #define GDISP_INITIAL_BACKLIGHT 0 -#endif - -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) - -#define IS31_ADDR_DEFAULT 0x74 - -#define IS31_REG_CONFIG 0x00 -// bits in reg -#define IS31_REG_CONFIG_PICTUREMODE 0x00 -#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 -#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 -// D2:D0 bits are starting frame for autoplay mode - -#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode - -#define IS31_REG_AUTOPLAYCTRL1 0x02 -// D6:D4 number of loops (000=infty) -// D2:D0 number of frames to be used - -#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) - -#define IS31_REG_DISPLAYOPT 0x05 -#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames -#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 -// D2:D0 bits blink period time (*0.27s) - -#define IS31_REG_AUDIOSYNC 0x06 -#define IS31_REG_AUDIOSYNC_ENABLE 0x1 - -#define IS31_REG_FRAMESTATE 0x07 - -#define IS31_REG_BREATHCTRL1 0x08 -// D6:D4 fade out time (26ms*2^i) -// D2:D0 fade in time (26ms*2^i) - -#define IS31_REG_BREATHCTRL2 0x09 -#define IS31_REG_BREATHCTRL2_ENABLE 0x10 -// D2:D0 extinguish time (3.5ms*2^i) - -#define IS31_REG_SHUTDOWN 0x0A -#define IS31_REG_SHUTDOWN_OFF 0x0 -#define IS31_REG_SHUTDOWN_ON 0x1 - -#define IS31_REG_AGCCTRL 0x0B -#define IS31_REG_ADCRATE 0x0C - -#define IS31_COMMANDREGISTER 0xFD -#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' -#define IS31_FUNCTIONREG_SIZE 0xD - -#define IS31_FRAME_SIZE 0xB4 - -#define IS31_PWM_REG 0x24 -#define IS31_PWM_SIZE 0x90 - -#define IS31_LED_MASK_SIZE 0x12 -#define IS31_SCREEN_WIDTH 16 - -#define IS31 - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct{ - uint8_t write_buffer_offset; - uint8_t write_buffer[IS31_FRAME_SIZE]; - uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; - uint8_t page; -}__attribute__((__packed__)) PrivData; - -// Some common routines and macros -#define PRIV(g) ((PrivData*)g->priv) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -static GFXINLINE void write_page(GDisplay* g, uint8_t page) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = IS31_COMMANDREGISTER; - tx[1] = page; - write_data(g, tx, 2); -} - -static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = reg; - tx[1] = data; - write_page(g, page); - write_data(g, tx, 2); -} - -static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { - PRIV(g)->write_buffer_offset = offset; - write_page(g, page); - write_data(g, (uint8_t*)PRIV(g), length + 1); -} - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - __builtin_memset(PRIV(g), 0, sizeof(PrivData)); - PRIV(g)->page = 0; - - // Initialise the board interface - init_board(g); - gfxSleepMilliseconds(10); - - // zero function page, all registers (assuming full_page is all zeroes) - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - set_hardware_shutdown(g, false); - gfxSleepMilliseconds(10); - // software shutdown - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - // zero function page, all registers - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - gfxSleepMilliseconds(10); - - - // zero all LED registers on all 8 pages, and enable the mask - __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); - for(uint8_t i=0; i<8; i++) { - write_ram(g, i, 0, IS31_FRAME_SIZE); - gfxSleepMilliseconds(1); - } - - // software shutdown disable (i.e. turn stuff on) - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - - // Finish Init - post_init_board(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -#if GDISP_HARDWARE_FLUSH - LLDSPEC void gdisp_lld_flush(GDisplay *g) { - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - PRIV(g)->page++; - PRIV(g)->page %= 2; - // TODO: some smarter algorithm for this - // We should run only one physical page at a time - // This way we don't need to send so much data, and - // we could use slightly less memory - uint8_t* src = PRIV(g)->frame_buffer; - for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) { - for (int x=0;x<GDISP_SCREEN_WIDTH;x++) { - uint8_t val = (uint16_t)*src * g->g.Backlight / 100; - PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val]; - ++src; - } - } - write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); - gfxSleepMilliseconds(1); - write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_DRAWPIXEL - LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); - g->flags |= GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_PIXELREAD - LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); - } -#endif - -#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL - LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - break; - case powerOn: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_BACKLIGHT: - if (g->g.Backlight == (unsigned)g->p.ptr) - return; - unsigned val = (unsigned)g->p.ptr; - g->g.Backlight = val > 100 ? 100 : val; - g->flags |= GDISP_FLG_NEEDFLUSH; - return; - } - } -#endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h deleted file mode 100644 index bb28ad775e..0000000000 --- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE - -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/whitefox/gfxconf.h b/keyboards/whitefox/gfxconf.h index 890317a0f4..ca338399d3 100644 --- a/keyboards/whitefox/gfxconf.h +++ b/keyboards/whitefox/gfxconf.h @@ -22,308 +22,6 @@ #ifndef _GFXCONF_H #define _GFXCONF_H - -/////////////////////////////////////////////////////////////////////////// -// GOS - One of these must be defined, preferably in your Makefile // -/////////////////////////////////////////////////////////////////////////// -//#define GFX_USE_OS_CHIBIOS TRUE -//#define GFX_USE_OS_FREERTOS FALSE -// #define GFX_FREERTOS_USE_TRACE FALSE -//#define GFX_USE_OS_WIN32 FALSE -//#define GFX_USE_OS_LINUX FALSE -//#define GFX_USE_OS_OSX FALSE -//#define GFX_USE_OS_ECOS FALSE -//#define GFX_USE_OS_RAWRTOS FALSE -//#define GFX_USE_OS_ARDUINO FALSE -//#define GFX_USE_OS_KEIL FALSE -//#define GFX_USE_OS_CMSIS FALSE -//#define GFX_USE_OS_RAW32 FALSE -// #define INTERRUPTS_OFF() optional_code -// #define INTERRUPTS_ON() optional_code -// These are not defined by default for some reason -#define GOS_NEED_X_THREADS FALSE -#define GOS_NEED_X_HEAP FALSE - -// Options that (should where relevant) apply to all operating systems - #define GFX_NO_INLINE FALSE -// #define GFX_COMPILER GFX_COMPILER_UNKNOWN -// #define GFX_CPU GFX_CPU_UNKNOWN -// #define GFX_OS_HEAP_SIZE 0 -// #define GFX_OS_NO_INIT FALSE -// #define GFX_OS_INIT_NO_WARNING FALSE -// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine -// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine -// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine - - -/////////////////////////////////////////////////////////////////////////// -// GDISP // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GDISP TRUE - -//#define GDISP_NEED_AUTOFLUSH FALSE -//#define GDISP_NEED_TIMERFLUSH FALSE -//#define GDISP_NEED_VALIDATION TRUE -//#define GDISP_NEED_CLIP TRUE -#define GDISP_NEED_CIRCLE TRUE -#define GDISP_NEED_ELLIPSE TRUE -#define GDISP_NEED_ARC TRUE -#define GDISP_NEED_ARCSECTORS TRUE -#define GDISP_NEED_CONVEX_POLYGON TRUE -//#define GDISP_NEED_SCROLL FALSE -#define GDISP_NEED_PIXELREAD TRUE -#define GDISP_NEED_CONTROL TRUE -//#define GDISP_NEED_QUERY FALSE -//#define GDISP_NEED_MULTITHREAD FALSE -//#define GDISP_NEED_STREAMING FALSE -#define GDISP_NEED_TEXT TRUE -// #define GDISP_NEED_TEXT_WORDWRAP FALSE -// #define GDISP_NEED_ANTIALIAS FALSE -// #define GDISP_NEED_UTF8 FALSE - #define GDISP_NEED_TEXT_KERNING TRUE -// #define GDISP_INCLUDE_FONT_UI1 FALSE -// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font. -// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE - #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE -// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE -// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE - #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE -// #define GDISP_INCLUDE_USER_FONTS FALSE - -//#define GDISP_NEED_IMAGE FALSE -// #define GDISP_NEED_IMAGE_NATIVE FALSE -// #define GDISP_NEED_IMAGE_GIF FALSE -// #define GDISP_NEED_IMAGE_BMP FALSE -// #define GDISP_NEED_IMAGE_BMP_1 FALSE -// #define GDISP_NEED_IMAGE_BMP_4 FALSE -// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE -// #define GDISP_NEED_IMAGE_BMP_8 FALSE -// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE -// #define GDISP_NEED_IMAGE_BMP_16 FALSE -// #define GDISP_NEED_IMAGE_BMP_24 FALSE -// #define GDISP_NEED_IMAGE_BMP_32 FALSE -// #define GDISP_NEED_IMAGE_JPG FALSE -// #define GDISP_NEED_IMAGE_PNG FALSE -// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE -#ifdef EMULATOR -#define GDISP_NEED_PIXMAP TRUE -#endif -// #define GDISP_NEED_PIXMAP_IMAGE FALSE - -//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used. -//#define GDISP_LINEBUF_SIZE 128 -//#define GDISP_STARTUP_COLOR Black -#define GDISP_NEED_STARTUP_LOGO FALSE - -//#define GDISP_TOTAL_DISPLAYS 2 - -#ifndef EMULATOR -#define GDISP_DRIVER_LIST GDISPVMT_IS31FL3731C_WHITEFOX -#endif - - #ifdef GDISP_DRIVER_LIST - // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability - #define GDISP_HARDWARE_STREAM_WRITE FALSE - #define GDISP_HARDWARE_STREAM_READ FALSE - #define GDISP_HARDWARE_STREAM_POS FALSE - #define GDISP_HARDWARE_DRAWPIXEL TRUE - #define GDISP_HARDWARE_CLEARS FALSE - #define GDISP_HARDWARE_FILLS FALSE - //#define GDISP_HARDWARE_BITFILLS FALSE - #define GDISP_HARDWARE_SCROLL FALSE - #define GDISP_HARDWARE_PIXELREAD TRUE - #define GDISP_HARDWARE_CONTROL TRUE - #define GDISP_HARDWARE_QUERY FALSE - #define GDISP_HARDWARE_CLIP FALSE - - #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 - #endif - -// The custom format is not defined for some reason, so define it as error -// so we don't get compiler warnings -#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR - -#define GDISP_USE_GFXNET FALSE -// #define GDISP_GFXNET_PORT 13001 -// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE -// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE -// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GWIN // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GWIN FALSE - -//#define GWIN_NEED_WINDOWMANAGER FALSE -// #define GWIN_REDRAW_IMMEDIATE FALSE -// #define GWIN_REDRAW_SINGLEOP FALSE -// #define GWIN_NEED_FLASHING FALSE -// #define GWIN_FLASHING_PERIOD 250 - -//#define GWIN_NEED_CONSOLE FALSE -// #define GWIN_CONSOLE_USE_HISTORY FALSE -// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE -// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE -// #define GWIN_CONSOLE_ESCSEQ FALSE -// #define GWIN_CONSOLE_USE_BASESTREAM FALSE -// #define GWIN_CONSOLE_USE_FLOAT FALSE -//#define GWIN_NEED_GRAPH FALSE -//#define GWIN_NEED_GL3D FALSE - -//#define GWIN_NEED_WIDGET FALSE -//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 -// #define GWIN_NEED_LABEL FALSE -// #define GWIN_LABEL_ATTRIBUTE FALSE -// #define GWIN_NEED_BUTTON FALSE -// #define GWIN_BUTTON_LAZY_RELEASE FALSE -// #define GWIN_NEED_SLIDER FALSE -// #define GWIN_SLIDER_NOSNAP FALSE -// #define GWIN_SLIDER_DEAD_BAND 5 -// #define GWIN_SLIDER_TOGGLE_INC 20 -// #define GWIN_NEED_CHECKBOX FALSE -// #define GWIN_NEED_IMAGE FALSE -// #define GWIN_NEED_IMAGE_ANIMATION FALSE -// #define GWIN_NEED_RADIO FALSE -// #define GWIN_NEED_LIST FALSE -// #define GWIN_NEED_LIST_IMAGES FALSE -// #define GWIN_NEED_PROGRESSBAR FALSE -// #define GWIN_PROGRESSBAR_AUTO FALSE -// #define GWIN_NEED_KEYBOARD FALSE -// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 -// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE -// #define GWIN_NEED_TEXTEDIT FALSE -// #define GWIN_FLAT_STYLING FALSE -// #define GWIN_WIDGET_TAGS FALSE - -//#define GWIN_NEED_CONTAINERS FALSE -// #define GWIN_NEED_CONTAINER FALSE -// #define GWIN_NEED_FRAME FALSE -// #define GWIN_NEED_TABSET FALSE -// #define GWIN_TABSET_TABHEIGHT 18 - - -/////////////////////////////////////////////////////////////////////////// -// GEVENT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GEVENT TRUE - -//#define GEVENT_ASSERT_NO_RESOURCE FALSE -//#define GEVENT_MAXIMUM_SIZE 32 -//#define GEVENT_MAX_SOURCE_LISTENERS 32 - - -/////////////////////////////////////////////////////////////////////////// -// GTIMER // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GTIMER FALSE - -//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY -//#define GTIMER_THREAD_WORKAREA_SIZE 2048 - - -/////////////////////////////////////////////////////////////////////////// -// GQUEUE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GQUEUE FALSE - -//#define GQUEUE_NEED_ASYNC FALSE -//#define GQUEUE_NEED_GSYNC FALSE -//#define GQUEUE_NEED_FSYNC FALSE -//#define GQUEUE_NEED_BUFFERS FALSE - -/////////////////////////////////////////////////////////////////////////// -// GINPUT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GINPUT FALSE - -//#define GINPUT_NEED_MOUSE FALSE -// #define GINPUT_TOUCH_STARTRAW FALSE -// #define GINPUT_TOUCH_NOTOUCH FALSE -// #define GINPUT_TOUCH_NOCALIBRATE FALSE -// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE -// #define GINPUT_MOUSE_POLL_PERIOD 25 -// #define GINPUT_MOUSE_CLICK_TIME 300 -// #define GINPUT_TOUCH_CXTCLICK_TIME 700 -// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE -// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE -// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 -//#define GINPUT_NEED_KEYBOARD FALSE -// #define GINPUT_KEYBOARD_POLL_PERIOD 200 -// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 -// #define GKEYBOARD_LAYOUT_OFF FALSE -// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE -//#define GINPUT_NEED_TOGGLE FALSE -//#define GINPUT_NEED_DIAL FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GFILE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GFILE FALSE - -//#define GFILE_NEED_PRINTG FALSE -//#define GFILE_NEED_SCANG FALSE -//#define GFILE_NEED_STRINGS FALSE -//#define GFILE_NEED_FILELISTS FALSE -//#define GFILE_NEED_STDIO FALSE -//#define GFILE_NEED_NOAUTOMOUNT FALSE -//#define GFILE_NEED_NOAUTOSYNC FALSE - -//#define GFILE_NEED_MEMFS FALSE -//#define GFILE_NEED_ROMFS FALSE -//#define GFILE_NEED_RAMFS FALSE -//#define GFILE_NEED_FATFS FALSE -//#define GFILE_NEED_NATIVEFS FALSE -//#define GFILE_NEED_CHBIOSFS FALSE - -//#define GFILE_ALLOW_FLOATS FALSE -//#define GFILE_ALLOW_DEVICESPECIFIC FALSE -//#define GFILE_MAX_GFILES 3 - -/////////////////////////////////////////////////////////////////////////// -// GADC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GADC FALSE - -//#define GADC_MAX_LOWSPEED_DEVICES 4 - - -/////////////////////////////////////////////////////////////////////////// -// GAUDIO // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GAUDIO FALSE -// There seems to be a bug in the ugfx code, the wrong define is used -// So define it in order to avoid warnings -#define GFX_USE_GAUDIN GFX_USE_GAUDIO -// #define GAUDIO_NEED_PLAY FALSE -// #define GAUDIO_NEED_RECORD FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GMISC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GMISC TRUE - -//#define GMISC_NEED_ARRAYOPS FALSE -//#define GMISC_NEED_FASTTRIG FALSE -//#define GMISC_NEED_FIXEDTRIG FALSE -//#define GMISC_NEED_INVSQRT FALSE -// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE -// #define GMISC_INVSQRT_REAL_SLOW FALSE -#define GMISC_NEED_MATRIXFLOAT2D TRUE -#define GMISC_NEED_MATRIXFIXED2D FALSE +#include "common_gfxconf.h" #endif /* _GFXCONF_H */ diff --git a/keyboards/whitefox/readme.md b/keyboards/whitefox/readme.md index 0714ad5639..2f1445d33d 100644 --- a/keyboards/whitefox/readme.md +++ b/keyboards/whitefox/readme.md @@ -1,7 +1,14 @@ -WhiteFox keyboard firmware -====================== +WhiteFox +======== -This is an experimental port which came from the original TMK WhiteFox repo. +A compact 65% keyboard. -The LED controller was not ported, as the original was a dirty hack and it would -be good to have complete support. +Keyboard Maintainer: QMK Community +Hardware Supported: Whitefox PCB +Hardware Availability: https://input.club/whitefox/ + +Make example for this keyboard (after setting up your build environment): + + make whitefox-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk index fb34dbb9a4..32273e08aa 100644 --- a/keyboards/whitefox/rules.mk +++ b/keyboards/whitefox/rules.mk @@ -1,7 +1,6 @@ # project specific files SRC = matrix.c \ - led.c \ - animations.c + led.c ## chip/board settings # - the next two should match the directories in @@ -70,4 +69,6 @@ CUSTOM_MATRIX = yes # Custom matrix file BACKLIGHT_ENABLE = yes VISUALIZER_ENABLE = yes -include $(KEYBOARD_PATH)/drivers/gdisp/IS31FL3731C/driver.mk +LED_DRIVER = is31fl3731c +LED_WIDTH = 16 +LED_HEIGHT = 5
\ No newline at end of file diff --git a/keyboards/whitefox/visualizer.c b/keyboards/whitefox/visualizer.c index 167e0ec4de..e5bafcbe95 100644 --- a/keyboards/whitefox/visualizer.c +++ b/keyboards/whitefox/visualizer.c @@ -20,7 +20,7 @@ #include "visualizer.h" #include "visualizer_keyframes.h" #include "led.h" -#include "animations.h" +#include "default_animations.h" static bool initial_update = true; diff --git a/keyboards/xd60/readme.md b/keyboards/xd60/readme.md index 1e8e52caa1..d7aa3d9b9e 100644 --- a/keyboards/xd60/readme.md +++ b/keyboards/xd60/readme.md @@ -1,17 +1,16 @@ -# QMK Firmware for XIUDI's 60% XD60 PCB +XD60 +== -![Top View of a pair of XD60 Keyboard](https://i.imgur.com/3Jq2743.jpg) +Compact 60% with arrows. -## Quantum MK Firmware -For the full Quantum feature list, see [the parent readme.md](/readme.md). +![Top View of a pair of XD60 Keyboard](https://i.imgur.com/3Jq2743.jpg) -## Additional Notes -The XD60 is essentially a GH60 rev. C, with support for a right-hand arrow cluster. Includes full compatibility with GH60 expansion boards. Board also supports in-switch LEDs (two-pin, single colour), as well as WS2182 LED strips for underglow lighting. Default keymap included, matching configuration on sale page. +Keyboard Maintainer: QMK Community +Hardware Supported: XD60 PCB +Hardware Availability: https://www.massdrop.com/buy/xd60-xd64-custom-mechanical-keyboard-kit?mode=guest_open -Version 2 PCBs include 6 soldered on RGB underglow LEDs on the bottom, and are labelled "XD60v2" on the top. They are otherwise identical to v1 PCBs. +Make example for this keyboard (after setting up your build environment): -## Known Issues -In-switch backlight LEDs seem to only support 1 brightness level. + make xd60-default -## Build -To build the default keymap, simply run `make xd60-default`. +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/xd75/Makefile b/keyboards/xd75/Makefile new file mode 100644 index 0000000000..840dc9a286 --- /dev/null +++ b/keyboards/xd75/Makefile @@ -0,0 +1,18 @@ +# Copyright 2013 Jun Wako <wakojun@gmail.com> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/xd75/config.h b/keyboards/xd75/config.h new file mode 100644 index 0000000000..3764cfba4b --- /dev/null +++ b/keyboards/xd75/config.h @@ -0,0 +1,193 @@ +/* +Copyright 2017 REPLACE_WITH_YOUR_NAME + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCDCD +#define PRODUCT_ID 0x7575 +#define DEVICE_VER 0x0001 +#define MANUFACTURER xiudi +#define PRODUCT XD75 +#define DESCRIPTION XD75Re 15x5 ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3, B0 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN F5 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +// ws2812 options +#define RGB_DI_PIN F6 // pin the DI on the ws2812 is hooked-up to +#define RGBLIGHT_ANIMATIONS // run RGB animations +#define RGBLED_NUM 6 // number of LEDs +#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue +#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation +#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +#endif diff --git a/keyboards/xd75/keymaps/default/Makefile b/keyboards/xd75/keymaps/default/Makefile new file mode 100644 index 0000000000..6e8941fdfd --- /dev/null +++ b/keyboards/xd75/keymaps/default/Makefile @@ -0,0 +1,37 @@ +# Copyright 2013 Jun Wako <wakojun@gmail.com> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + + +# QMK Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/xd75/keymaps/default/config.h b/keyboards/xd75/keymaps/default/config.h new file mode 100644 index 0000000000..f52a97bbc8 --- /dev/null +++ b/keyboards/xd75/keymaps/default/config.h @@ -0,0 +1,24 @@ +/* Copyright 2017 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/xd75/keymaps/default/keymap.c b/keyboards/xd75/keymaps/default/keymap.c new file mode 100644 index 0000000000..82ea1f2be8 --- /dev/null +++ b/keyboards/xd75/keymaps/default/keymap.c @@ -0,0 +1,186 @@ +/* Copyright 2017 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "xd75.h" + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define ___T___ KC_TRNS +#define XXXXXXX KC_NO + +// Layer shorthand +#define _QW 0 +#define _CM 1 +#define _DV 2 +#define _LW 3 +#define _RS 4 +#define _FN 5 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTY - MIT ENHANCED / GRID COMPATIBLE + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | ESC | A | S | D | F | G | H | J | K | L | ; | ' | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | BRITE | LCTRL | LALT | LGUI | RAISE | XXXXXX . SPACE | LOWER | RGUI | RALT | RCTRL | FN | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_QW] = { /* QWERTY */ + { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC, KC_SPC, MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT }, + }, + +/* COLEMAK - MIT ENHANCED / GRID COMPATIBLE + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | ESC | A | R | S | T | D | H | N | E | I | O | ' | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | Z | X | C | V | B | K | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | BRITE | LCTRL | LALT | LGUI | RAISE | XXXXXX . SPACE | LOWER | RGUI | RALT | RCTRL | FN | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_CM] = { /* COLEMAK */ + { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC, KC_SPC, MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT }, + }, + +/* DVORAK - MIT ENHANCED / GRID COMPATIBLE + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | ' | , | . | P | Y | F | G | C | R | L | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | ESC | A | O | E | U | I | D | H | T | N | S | / | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | ; | Q | J | K | X | B | M | W | V | Z | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | BRITE | LCTRL | LALT | LGUI | RAISE | XXXXXX . SPACE | LOWER | RGUI | RALT | RCTRL | FN | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_DV] = { /* DVORAK */ + { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC, KC_SPC, MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT }, + }, + +/* LOWERED + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | | | | INS | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | XXXXXX . | | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | XXXXXX . | | | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | | | | | | XXXXXX . | | | | | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_LW] = { /* LOWERED */ + { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, _______, KC_INS }, + { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, ___T___, ___T___, _______ }, + { _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, ___T___, ___T___, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + }, + +/* RAISED + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | | | INS | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | XXXXXX . | | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | XXXXXX . | | | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | | | | | | XXXXXX . | | | | | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_RS] = { /* RAISED */ + { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, KC_INS }, + { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, ___T___, ___T___, _______ }, + { _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, ___T___, ___T___, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + }, + +/* FUNCTION + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | NUM LK | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | SCR LK | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | F22 | F23 | F24 | PAUSE | PR SCR | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | CAP LK | MS BT5 | MS BT4 | MS BT3 | MS BT2 | SLOW M | FAST M | NEXT | VOL+ | VOL- | PLAY | | XXXXXX . | WHEEL+ | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | RGB TG | RGB MD | RGB HI | RGB HD | RGB SI | RGB SD | RGB VI | RGB VD | BL TOG | BL INC | BL DEC | XXXXXX . | MOUS U | WHEEL- | + * |--------+--------+--------+--------+--------+-- 2u -----------+--------+--------+--------+--------+-----------------+--------+--------| + * | RESET | | QWERTY | COLEMK | DVORAK | XXXXXX . MS BT1 | | | | | | MOUS L | MOUS D | MOUS R | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_FN] = { /* FUNCTION */ + { KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR }, + { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U }, + { RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_INC, BL_DEC, ___T___, ___T___, KC_MS_U, KC_WH_D }, + { RESET , _______, DF(_QW), DF(_CM), DF(_DV), KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, + }, +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/xd75/keymaps/default/readme.md b/keyboards/xd75/keymaps/default/readme.md new file mode 100644 index 0000000000..d53c0f34a8 --- /dev/null +++ b/keyboards/xd75/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for xd75 diff --git a/keyboards/xd75/keymaps/fabian/Makefile b/keyboards/xd75/keymaps/fabian/Makefile new file mode 100644 index 0000000000..6e8941fdfd --- /dev/null +++ b/keyboards/xd75/keymaps/fabian/Makefile @@ -0,0 +1,37 @@ +# Copyright 2013 Jun Wako <wakojun@gmail.com> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + + +# QMK Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/xd75/keymaps/fabian/config.h b/keyboards/xd75/keymaps/fabian/config.h new file mode 100644 index 0000000000..f52a97bbc8 --- /dev/null +++ b/keyboards/xd75/keymaps/fabian/config.h @@ -0,0 +1,24 @@ +/* Copyright 2017 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/xd75/keymaps/fabian/keymap.c b/keyboards/xd75/keymaps/fabian/keymap.c new file mode 100644 index 0000000000..f6cc95ba28 --- /dev/null +++ b/keyboards/xd75/keymaps/fabian/keymap.c @@ -0,0 +1,237 @@ +#include "xd75.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Custom +#define CTL_ESC CTL_T(KC_ESC) // Tap for Escape, hold for Control +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +#define SFT_BSP SFT_T(KC_BSPC) // Tap for Backspace, hold for Shift +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift) +// #define MEH_GRV MEH_T(KC_GRV) // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,--------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | S | D | F | G | | | | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | | | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space | | | | Bksp |Raise | GUI |AltGr | Ctrl |Adjust| + * `--------------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = { + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, _______, _______, _______, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + { CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, _______, _______, _______, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + { SFT_BSP, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, _______, _______, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT }, + { ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, _______, _______, _______, SFT_BSP, RAISE, KC_RGUI, KC_RALT, KC_RCTL, ADJUST }, +}, + +/* Colemak + * ,--------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | | | | H | N | E | I | O | " | + * |------+------+------+------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | | | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space | | | | Bksp |Raise | GUI |AltGr | Ctrl |Adjust| + * `--------------------------------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, _______, _______, _______, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, + { CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, _______, _______, _______, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT }, + { SFT_BSP, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, _______, _______, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT }, + { ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, _______, _______, _______, SFT_BSP, RAISE, KC_RGUI, KC_RALT, KC_RCTL, ADJUST }, +}, + +/* Dvorak + * ,--------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | " | , | . | P | Y | | | | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | Esc | A | O | E | U | I | | | | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | | | | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space | | | | Bksp |Raise | GUI |AltGr | Ctrl |Adjust| + * `--------------------------------------------------------------------------------------------------------' + */ +[_DVORAK] = { + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, _______, _______, _______, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC }, + { CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, _______, _______, _______, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH }, + { SFT_BSP, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, _______, _______, _______, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT }, + { ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, _______, _______, _______, SFT_BSP, RAISE, KC_RGUI, KC_RALT, KC_RCTL, ADJUST }, +}, + +/* Lower + * ,--------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | | | | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | | F12 | MS L | MS D |MS U | MS R |MS Btn| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `--------------------------------------------------------------------------------------------------------' + */ +[_LOWER] = { + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC }, + { KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE }, + { _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_BTN1 }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY }, +}, + +/* Raise + * ,--------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | | | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | | F12 | Left | Down | Up | Rght |MS_BN2| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `--------------------------------------------------------------------------------------------------------' + */ +[_RAISE] = { + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC }, + { KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS }, + { _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_BTN2 }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY }, +}, + +/* Adjust (Lower + Raise) + * ,--------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | |Reset | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk|Dvorak|Reset | Del | + * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_ADJUST] = { + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, RESET, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, DVORAK, RESET, KC_DEL }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, +}, +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistent_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistent_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/xd75/readme.md b/keyboards/xd75/readme.md new file mode 100644 index 0000000000..0bc82be91e --- /dev/null +++ b/keyboards/xd75/readme.md @@ -0,0 +1,30 @@ +xd75 keyboard firmware +====================== + +The XD75Re is a 15x5 full-grid ortholinear keyboard manufactured by XIUDI. This port of the QMK firmware is my first shot at using QMK, so if you see any features done wrong (or just plain missing), feel free to fix them and put in a pull request! + +## Quantum MK Firmware + +For more info on this firmware (and how to make it your own), head over to [qmk.fm](http://qmk.fm). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/xd75 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +The "default" keymap included is basically the OLKB Atomic keymap with a few buttons added for RGB underglow control. This should be usable as a starting point, but most people will be best served creating their own keymap and flashing it - more info on creating your own keymap is available in [the official QMK documentation](https://docs.qmk.fm). + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/xd75/rules.mk b/keyboards/xd75/rules.mk new file mode 100644 index 0000000000..f6d8978301 --- /dev/null +++ b/keyboards/xd75/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4996 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches diff --git a/keyboards/xd75/xd75.c b/keyboards/xd75/xd75.c new file mode 100644 index 0000000000..3d635f3c10 --- /dev/null +++ b/keyboards/xd75/xd75.c @@ -0,0 +1,43 @@ +/* Copyright 2017 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "xd75.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/xd75/xd75.h b/keyboards/xd75/xd75.h new file mode 100644 index 0000000000..22bc2ecc0c --- /dev/null +++ b/keyboards/xd75/xd75.h @@ -0,0 +1,39 @@ +/* Copyright 2017 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef XD75_H +#define XD75_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,\ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,\ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,\ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \ +} + +#endif |