diff options
Diffstat (limited to 'layouts/community')
| -rw-r--r-- | layouts/community/ergodox/drashna/keymap.c | 13 | ||||
| -rw-r--r-- | layouts/community/ergodox/drashna/visualizer.c_old (renamed from layouts/community/ergodox/drashna/visualizer.c) | 0 | ||||
| -rw-r--r-- | layouts/community/split_3x6_3/drashna/config.h | 39 | ||||
| -rw-r--r-- | layouts/community/split_3x6_3/drashna/keymap.c | 2 |
4 files changed, 27 insertions, 27 deletions
diff --git a/layouts/community/ergodox/drashna/keymap.c b/layouts/community/ergodox/drashna/keymap.c index 3e14606060..600e29020d 100644 --- a/layouts/community/ergodox/drashna/keymap.c +++ b/layouts/community/ergodox/drashna/keymap.c @@ -19,7 +19,7 @@ #ifdef UNICODEMAP_ENABLE # include "drashna_unicode.h" #endif // UNICODEMAP_ENABLE - +#include "drivers/sensors/pimoroni_trackball.h" enum more_custom_keycodes { KC_SWAP_NUM = NEW_SAFE_RANGE, PM_SCROLL, @@ -317,13 +317,14 @@ void shutdown_keymap(void) { static bool mouse_button_one, trackball_button_one; -void trackball_check_click(bool pressed, report_mouse_t* mouse) { - if (mouse_button_one | pressed) { - mouse->buttons |= MOUSE_BTN1; +void trackball_register_button(bool pressed, enum mouse_buttons button) { + report_mouse_t currentReport = pointing_device_get_report(); + if (pressed) { + currentReport.buttons |= button; } else { - mouse->buttons &= ~MOUSE_BTN1; + currentReport.buttons &= ~button; } - trackball_button_one = pressed; + pointing_device_set_report(currentReport); } #endif diff --git a/layouts/community/ergodox/drashna/visualizer.c b/layouts/community/ergodox/drashna/visualizer.c_old index 6b1c3ff498..6b1c3ff498 100644 --- a/layouts/community/ergodox/drashna/visualizer.c +++ b/layouts/community/ergodox/drashna/visualizer.c_old diff --git a/layouts/community/split_3x6_3/drashna/config.h b/layouts/community/split_3x6_3/drashna/config.h index cc53d4c367..4a094e1954 100644 --- a/layouts/community/split_3x6_3/drashna/config.h +++ b/layouts/community/split_3x6_3/drashna/config.h @@ -31,11 +31,11 @@ #ifdef RGBLIGHT_ENABLE # undef RGBLED_NUM -# define RGBLED_NUM 27 +# define RGBLED_NUM 27 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 5 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 5 # define RGBLIGHT_LIMIT_VAL 120 #endif @@ -44,37 +44,36 @@ # undef RGB_DI_PIN # define RGB_DI_PIN A3 # endif -# define RGB_MATRIX_KEYPRESSES // reacts to keypresses +# define RGB_MATRIX_KEYPRESSES // reacts to keypresses // # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) // # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended // # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) // # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) -# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 -# define RGB_MATRIX_HUE_STEP 8 -# define RGB_MATRIX_SAT_STEP 8 -# define RGB_MATRIX_VAL_STEP 5 -# define RGB_MATRIX_SPD_STEP 10 +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +# define RGB_MATRIX_HUE_STEP 8 +# define RGB_MATRIX_SAT_STEP 8 +# define RGB_MATRIX_VAL_STEP 5 +# define RGB_MATRIX_SPD_STEP 10 #endif #ifdef CONVERT_TO_PROTON_C -# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 -# define WS2812_PWM_CHANNEL 4 // default: 2 -# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 -# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 +# define WS2812_PWM_CHANNEL 4 // default: 2 +# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU. # undef SOFT_SERIAL_PIN -# define SOFT_SERIAL_PIN D3 -# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1 -# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +# define SOFT_SERIAL_PIN D3 +# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1 +# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 // #define INIT_EE_HANDS_LEFT // #define INIT_EE_HANDS_RIGHT #endif - #if defined(AUDIO_ENABLE) && !defined(CONVERT_TO_PROTON_C) # define AUDIO_PIN B6 # define NO_MUSIC_MODE diff --git a/layouts/community/split_3x6_3/drashna/keymap.c b/layouts/community/split_3x6_3/drashna/keymap.c index 5a2d2f2e27..e46b626ef9 100644 --- a/layouts/community/split_3x6_3/drashna/keymap.c +++ b/layouts/community/split_3x6_3/drashna/keymap.c @@ -114,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // clang-format on #ifdef OLED_DRIVER_ENABLE -oled_rotation_t oled_init_user(oled_rotation_t rotation) { +oled_rotation_t oled_init_keymap(oled_rotation_t rotation) { return OLED_ROTATION_270; } #endif |